OLYMPUS AMERICA INC.
OLYMPUS OPTICAL CO. (EUROPA) GMBH
Wendenstrasse 14-18,
QuickStart Guide
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A.
20097 Hamburg, Germany
D-390 / C-150
UNPACKING THE BOX CONTENTS
Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the
camera set-up procedures that follow.
START HERE
It is strongly recommended that you follow these
step-by-step numbered instructions to set up and
quickly begin using your new Digital Camera.
Strap
AA (R6) alkaline
batteries (x2)
CAMEDIA
Master CD-ROM
USB cable
(grey color)
xD-Picture Card
Digital camera
For more detailed instructions on advanced features, please refer
to the printed Basic Manual included in your package, or the
Reference Manual on the CD-ROM.
The following items are also included in this package: Basic Manual, video cable, warranty card, registration card (not
pvovided in some areas), and safety precautions booklet.
• Close the battery compartment cover so that it pushes the batteries down inside. While pressing
the
mark, slide the cover in the opposite direction of
.
PREPARE THE CAMERA FOR USE
TIP: An optional Olympus E-7AC AC adapter is available, and is recommended when downloading images to ensure a
consistent power supply. See the Basic Manual for more information.
Before you begin using your Olympus digital camera…
b.Insert the xD-Picture Card
a.Loading batteries
The xD-Picture Card is where the camera stores your pictures and is available in a variety
of memory capacities. The pictures you take with the camera remain on the xD-Picture
Card even when the camera is turned off and/or the batteries are removed.
• Slide the battery compartment cover in the direction of
A
(the direction indicated by the
and lift it up in the direction of
mark on the cover),
B
.
A
• Insert the xD-Picture Card into the spring-loaded card slot as shown
in the illustration. Push the card fully into the slot. The card will lock
into place when fully inserted.
B
• To remove, push down on the xD-Picture Card. The card will pop up.
Pull to remove.
• Close the card cover.
• Insert batteries in the direction shown in the illustration.
Confirm you have installed the batteries and xD-Picture Card properly by
pressing
. The "No Picture" message should be displayed in the monitor.
Turn the camera off by pressing
again.
c.
Attach the strap (OPTIONAL)
Attach the strap as illustrated to make the camera easier to handle.
There is a mark on the bottom of the
camera showing the correct way to insert
batteries.
Orange lamp
AF target mark
Green lamp
TURNING ON THE CAMERA
All you need to do is slide the lens barrier open or closed to turn the camera ON or OFF.
Viewfinder
Monitor
Arrow pad
a.Turn the camera ON (SHOOTING MODE)
• Open the lens barrier.
• Close the lens barrier to turn the camera off.
Power on
Power off
OK/Menu button
Monitor button (QUICK VIEW
Playback button (
)
)
Lens barrier
TIP: To maximize battery life, this digital camera features a power saving mode in which the camera enters a sleep mode after
approximately three (3) minutes of non-use. Press the shutter button to wake up the camera.
L R 6 X 2 o r C R - V 3 X 1
b.Set the Date and Time (OPTIONAL)
Although this is not required, it is recommended that you set the date and time. This affects the way image
file names are created, and will conveniently include this information with each picture. The date and time
can also be set when the camera is in the playback mode.
Tripod socket
Battery compartment cover
• Open the lens barrier fully until it clicks.
Camera Settings in Shooting Mode as shown in Monitor
• Press
to display the menu.
Exposure compensation
Shooting mode
• Press to select MODE MENU.
• Press three times to select SETUP.
• Press once, and then twice to highlight
• Use to select the date format.
Battery check
P
+2.0
, and then press once.
Spot metering mode
White balance
• Adjust the date and time in the appropriate fields by using to select the field, and
the proper value. Repeat this step until all date/time fields have been set.
Note: Time is entered using the 24-hour format.
to set
Macro
AF target mark
Flash mode
Self-timer
(still pictures only)
• Press
twice to set the date and time and exit the menu.
Record mode
HQ 1600x1200
c.
Camera Diagram and Controls
Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the illustrations.
Number of storable still pictures/
seconds remaining for movies
Resolution (number of pixels)
Strap eyelet Card cover
Shutter button
Flash
VIDEO OUT jack
Camera Settings in Playback Mode as shown in Monitor
Print reserveation
Number of prints
Battery check
x
Protect
10
Record mode
Number pixels
Exposure compensation
White balance
HQ
SIZE: 1600x1200
VIDEO OUT
DC IN 3.4V
+
2.0
USB
Date and time
’03.09.12 12:30
FILE: 100–0020
File number, Frame number,
Playing time/
Total recording time
Note:
• Depending on the camera settings, not all indicators
will be displayed.
USB connector
Lens barrier
Self-timer lamp
Lens
DC-IN jack (3.4V) Connector cover
VT450901
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|