INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SECTION 4. UTILITY STITCHES
SECTION 1. KNOW YOUR MACHINE
Basic Zigzag ............................................................ 18
Overcasting............................................................. 18
Knit Stitch................................................................. 19
Tricot Stitch (Multiple Zigzag Stitch) ...................... 19
Straight Stretch Stitch.............................................. 20
Zigzag Stretch Stitch .............................................. 20
Button Sewing.......................................................... 21
4-Step Buttonhole ................................................... 22
To adjust buttonhole stitch density........................ 22
Corded Buttonhole.................................................. 23
Zipper Application .................................................... 24
Blind Hemming ....................................................... 27
Name of Parts ........................................................... 2
Standard Accessories................................................ 3
Accessory storage .................................................... 3
Extension Table ........................................................ 3
Free-arm sewing ....................................................... 4
SECTION 2. GETTING READY TO SEW
Connecting the Power Supply .................................. 4
Controlling the Sewing Speed ................................... 5
Reverse Stitch Lever ................................................ 5
Dropping the Feed Dog ............................................ 5
Raising and Lowering the Presser Foot .................... 6
Changing the Presser Foot ...................................... 6
Removing and Attaching the Foot Holder ................. 6
Changing Needles .................................................... 7
Needle and Thread Chart ......................................... 7
Winding the Bobbin .................................................. 8
Setting the spool ..................................................... 8
Removing the bobbin............................................... 8
Winding the bobbin .................................................. 9
Inserting the bobbin ................................................. 10
Threading the Machine ........................................... 11
Drawing up the Bobbin Thread............................... 12
Selecting the Stitch Pattern .................................... 13
Pattern selector dial.............................................. 13
Stitch Length Dial .................................................... 13
Adjusting stretch stitch balance.............................. 14
Stitch Width Dial ..................................................... 14
Variable needle position .......................................... 14
Balancing Needle Thread Tension .......................... 15
SECTION 5. DECORATIVE STITCHES
Decorative Satin Stitches ....................................... 28
Decorative Stretch Stitches ..................................... 28
Smocking ................................................................ 29
Pin Tucking ............................................................. 30
Shell Tucking .......................................................... 30
Fagoting .................................................................. 31
Patchwork ............................................................... 31
SECTION 6. CARE AND MAINTENANCE
Cleaning the Hook Race and Feed Dogs ............... 32
Replacing the Bobbin Holder.................................. 33
Replacing the Light Bulb ........................................ 33
Troubleshooting ...................................................... 34
SECTION 3. BASIC SEWING
Straight Stitch Sewing ............................................. 16
Starting to sew ...................................................... 16
Changing the sewing direcition
Finishing sewing ................................................... 16
Seam guides on the needle plate........................... 17
Truning a square corner ......................................... 17
Download from Www.Somanuals.com. All Manuals Search And Download.
1
SECTION 1. KNOW YOUR MACHINE
Names of Parts
t
w
r
e
y
q
u
q Bobbin winder stopper
w Bobbin winder spindle
e Hole for additional spool pin
r Spool holder
!
t Spool pin
!
y Bobbin winder thread guide
u Thread take-up lever
i Face plate
i
!
o
o Thread cutter
! Needle plate
! Extension table (Accessory storage)
! Hook cover plate
! Hook cover plate release button
! Thread tension dial
! Reverse stitch lever
! Stitch length dial
! Pattern selector dial
! Stitch width dial
! Presser foot
@ Needle
@ Needle clamp screw
@ Foot holder
@ Setscrew
@ Carrying handle
@ Handwheel
!
!
!
!
!
@
@
!
@
@
!
@ Power switch
@ Machine socket
@ Drop feed lever
@ Free-arm
# Foot lifter
@
@
#
@
@
@
@
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Standard Accessories
q
r
w
t
e
y
q Zipper foot E
w Blind hemming stitch foot G
e Sliding buttonhole foot J
r Needles
t Bobbins
y Screwdriver
u Lint brush
i
u
!
o
i Seam ripper (buttonhole opener)
o Spool holder (large)
! Spool holder (small)
! Additional spool pin
! Felt cushion
!
!
Accessory storage
The standard accessories can be stored in the
accessory storage box under the extension table.
Draw out the storage box from the table as
shown.
q Accessory storage box
q
Extension Table
To detach:
Pull the extension table to the left.
To attach:
Insert the pin into the hole and push the extension
table to snap it in place.
q Pin
w
q
w Hole
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Free-arm sewing
Free-arm sewing is used for stitching sleeves,
waistbands, pant legs or any other tubular
garments.
It is also useful for darning socks or mending knees
or elbows.
SECTION 2. GETTING READY TO SEW
Connecting the Power Supply
q
r
z Turn the power switch off.
x Insert the machine plug into the machine
socket.
t
c Insert the power supply plug into the wall
outlet.
v Turn the power switch on.
q Power switch
w
w Machine plug
e
e Machine socket
r Power supply plug
t Wall outlet
NOTE:
Before connecting to the power supply, make
sure the voltage shown on the machine
conforms to your electrical power.
Operating Instructions:
The symbol "O" of a switch indicates the "off"
position of a switch.
For an appliance with a polarized plug (one blade
wider than the other):
WARNING:
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
modify the plug in any way.
While in operation, always keep your eyes on
the sewing area, and do not touch any moving
parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control,
otherwise the machine will run intermittently.
The foot controller Model YC-482J or TJC-150 is
used with the sewing machine Model 7318 (USA
market only).
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Controlling the Sewing Speed
Foot control
Sewing speed can be varied by the foot control.
The harder you depress the foot control, the
faster the machine runs.
Reverse Stitch Lever
Push the reverse stitch lever down to sew in
reverse.
The machine will sew in reverse while the lever is
pushed.
Dropping the Feed Dog
The drop feed lever is located underneath the
q
free-arm bed on the backside of the machine.
To drop the feed dog, push the lever in the
direction of the arrow, as illustrated.
To raise the feed dog, push the lever in the
direction of the arrow, as illustrated, and turn the
handwheel toward you.
The feed dog must be up for regular sewing.
q Drop feed lever
w
w Raised position
e Lowered position
e
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Raising and Lowering the Presser Foot
The presser foot lifter raises and lowers the
presser foot.
e
You can raise the foot about 1/4" (0.6 cm) higher
than the normal up position for easy removal of
the presser foot, or to help you place heavy fabric
under the foot.
e
w
w
q Lowered position
q
w Normal up position
e Extra up position
Changing the Presser Foot
To remove:
Raise the needle to its highest position by turning
the handwheel counterclockwise. Raise the
presser foot, and press the lever on the back of
the foot holder.
q
q Lever
CAUTION:
Turn OFF the power switch before changing the
foot. Always use the proper foot for the selected
pattern. The wrong foot can cause the needle to
break. Do not push the lever down to prevent it
from being broken.
To attach:
Place the desired presser foot, so that the pin on
the foot lies just under the groove on the foot
e
w
holder. Lower the presser foot lifter to lock the
foot in place.
w Groove
e Pin
Removing and Attaching the Foot Holder
q
w
WARNING:
Turn OFF the power switch before detaching or
attaching the foot holder.
To remove:
Remove the setscrew by turning it
counterclockwise with a screwdriver and remove
the foot holder.
To attach:
Match the hole in the foot holder with the
threaded hole in the presser bar. Fit the setscrew
into the hole. Tighten the screw by turning it
clockwise with a screwdriver.
q Setscrew
w Foot holder
e Hole
r
e
r Threaded hole
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Changing Needles
CAUTION:
Always make sure to turn the power switch off
and disconnect the machine from power supply
before changing the needle.
q
w
q
Raise the needle by turning the handwheel and
lower the presser foot.
Turn off the power switch.
z Loosen the needle clamp screw by turning it
counterclockwise.
e
Remove the needle from the clamp.
q Needle clamp screw
x Insert a new needle into the needle clamp with
the flat side of the needle to the rear.
When inserting the needle into the needle
clamp, push it up against the stopper pin and
tighten the needle clamp screw firmly.
w Stopper pin
e Flat side
r
To check needle straightness, place the flat side
of the needle onto something flat (a needle plate,
glass etc.) The gap between the needle and the
flat surface should be consistent.
Never use a blunt needle.
r Gap
Needle and Thread Chart
WEIGHT
FABRIC
TYPE of NEEDLE
NEEDLE SIZE
Very Light
Chiffon, Georgette, Fine Lace, Organdy
Net, Tulle
Universal
Ball Point
9 (65)
9 (65)
Light
Batiste, Voile, Lawn, Pure Silk, Crepe de Chine,
Sheer Crepe, Chambray, Handkerchief Linen,
Gingham, Challis, Percale, Wool Crepe, Peau de Soie,
Taffeta, Satin, Silk Surah, Satin-backed
Crepe, Qiana
Blue Tipped Needle 11 (75)
Universal
11 (75)
12 (80)
Single Knits, Jersey, Swimwear, and Tricot
Blue Tipped Needle 11 (75)
Ball Point
11 (75)
Leather, Suede
Wedge Point
Leather Needle
11 (75)
Flannel, Velour, Velvet, Muslin, Velveteen,
Poplin, Corduroy, Broadcloth, Linen, Chintz,
Gabardine, Felt, Terry, Burlap, Quilted Fabrics
Universal
14 (90)
Medium
Double Knits, (synthetic and natural) Stretch
Velour, Stretch Terry, Sweater Knits
Ball Point
14 (90)
14 (90)
Leather, Vinyl, Suede
Wedge Point
Leather Needle
Denim, Sailcloth, Ticking
Denim Needle
Universal
16 (100)
16 (100)
Heavy
Double Faced Wool, Heavy Coating, Fake Fur,
Drapery Fabrics
Leather, Suede
Wedge Point
Leather Needle
16 (100)
18 (110)
Very Heavy
Canvas, Duck, Upholstery Fabrics
Topstitching for Special Finishes
Universal
16 (100)
Topstitching Needle 14 (90)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Winding the Bobbin
Setting the spool
(A)
Place a spool of thread on the spool pin with the
thread coming off the spool as illustrated.
A: Press the large spool holder firmly against the
spool of thread.
q
q Large spool holder
(B)
B: For a small spool, use the small spool holder.
w Small spool holder
w
Additional spool pin
The additional spool pin is for bobbin winding
without unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
e Additional spool pin
e
r
r Spool pin felt
t Spool pin hole
t
Removing the bobbin
z Push the hook cover plate release button to
the right and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
q
w
x Lift out the bobbin.
e Bobbin
e
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Winding the bobbin
w
e
z
q
z Pull out the handwheel to disengage the
clutch.
q Handwheel
w
c
x
v
x Draw the thread from the spool. Guide the
thread around the bobbin winder thread guide.
w Bobbin winder thread guide
e
b
m
c Thread through the hole in the bobbin from
the inside to the outside.
Put the bobbin on the bobbin winder spindle
with the free end of the thread coming out at
the top.
e Bobbin winder spindle
n
v Push the bobbin to the right.
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
b With the free end of the thread held in your
hand, depress the foot control. Stop the
machine when the bobbin has been wound a
few layers, and cut the thread close to the
bobbin.
n Depress the foot control again. When the
bobbin is fully wound, it will stop automatically.
Return the bobbin winder to its original
position by moving the spindle to the left, and
cut the thread as illustrated.
m Push in the handwheel to engage the clutch.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Inserting the bobbin
q
z
z Place the bobbin in the bobbin holder with the
thread running off as illustrated.
q Thread
x Guide the thread into the front notch on the
front side of the bobbin holder. Draw the
thread to the left, sliding it between the
tension spring blades.
x
w Front notch
e Tension spring blade
w
e
c
c Continue to draw the thread lightly until the
thread slips into the side notch.
r Side notch
r
v
v Pull out about 4˝ (10 cm) of thread. Attach the
hook cover plate. Check the threading by
referring to the chart shown on the hook cover
plate.
t Thread
y Hook cover plate
t
y
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Threading the Machine
z
c
To set the needle thread:
Raise the thread take-up lever to the highest
position by turning the handwheel.
Raise the presser foot.
x
q
v
b
z
z Draw the thread from the spool and pass it
under the thread guide. Then draw it down
along the right channel.
q Thread guide
w Right channel
w
x
x Draw the thread up around the bottom of the
thread guide plate.
r
Pull the thread up along the left channel
e Thread guide plate
r Left channel
e
c
c Firmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
t
t Thread take-up lever
v Draw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
v
b
y Needle bar thread guide
b Pass the thread through the needle eye from
the front or use the needle threader (refer to
the next page).
y
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Drawing up the Bobbin Thread
z
z Raise the presser foot and hold the needle
thread lightly with your left hand.
q Needle thread
q
x Turn the handwheel slowly toward you one
complete turn. Bring the bobbin thread up by
pulling the needle thread as illustrated.
q Needle thread
x
q
w
w Bobbin thread
c
c Pull 4˝ (10 cm) of both threads back and
under the presser foot.
w
q
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Selecting the Stitch Pattern
Raise the needle to its highest position.
e
Pattern Selector Dial
w
Turn the pattern selector dial to set the symbol of
the desired stitch pattern at the setting mark.
q Pattern selector dial
w Setting mark
CAUTION:
Do not turn the pattern selector dial while the
needle is in the fabric, otherwise the needle may
bend or break.
q
To select the stretch stitch patterns, set the stitch
length dial at S.S.
e Stretch stitch patterns
Stitch Length Dial
r
Turn the stitch length dial to set the desired stitch
length number at the setting mark.
The higher the number, the longer the stitch
The “
” mark shows the adjustment range
when sewing the buttonhole.
r Setting mark
t Stitch length dial
t
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Adjusting stretch stitch balance
If the stretch stitch patterns are uneven when you
sew on a particular fabric, correct them by turning
the stitch length dial.
“–”
If the patterns are drawn out, correct them by
setting the dial to the “–” side.
“+”
If the patterns are compressed, correct them by
setting the dial to the “+” side.
Stitch Width Dial
q
Turn the stitch width dial to set the desired stitch
width number at the setting mark.
The higher the number, the wider the stitch
q Stitch width dial
w
w Setting mark
CAUTION:
Do not turn the stitch width dial while the needle
is in the fabric, otherwise the needle may bend
or break.
Variable needle position
The needle drop position of the straight stitches
can be moved between the center (5) and left (0)
with the stitch width dial.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Balancing Needle Thread Tension
The thread tension should be adjusted depending
on the sewing materials, layers of fabric and
sewing method.
q
To adjust the thread tension, turn the tension dial.
q Tension dial
w
t
Balanced tension:
r
The ideal straight stitch has threads locked
between two layers of fabric, as illustrated.
For an ideal zigzag stitch, the bobbin thread does
not show on the right side (top side) of the fabric,
and the needle thread shows slightly on the
wrong side (bottom side) of the fabric.
w Needle thread (Top thread)
e
w
e Bobbin thread (Bottom thread)
r Right side (Top side) of fabric
t Wrong side (Bottom side) of fabric
Needle thread tension is too tight:
The bobbin thread (bottom thread) will appear on
the right side (top side) of the fabric.
Loosen the needle thread tension by moving the
dial to a lower number.
Needle thread tension is too loose:
The needle thread (top thread) will form loops on
the wrong side (bottom side) of the fabric.
Tighten the needle thread tension by moving the
dial to a higher number.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
SECTION 3. BASIC SEWING
Straight Stitch Sewing
Machine setting:
w
e
q Stitch pattern:
w Stitch width:
e Stitch length: 1.5 – 4
r Thread tension: 2 – 6
A
0 or 5
r
t
t Presser foot: Zigzag foot A
Starting to sew
Raise the presser foot and place the fabric under
the foot.
Lower the needle into the fabric.
Lower the presser foot and smooth the threads
toward the back. Depress the foot control.
NOTES:
Draw the threads to the left when sewing with the
buttonhole foot.
To fasten the beginning of the seam, first sew
several stitches in reverse then sew forward.
Changing the sewing direction
Stop the machine and turn the handwheel toward
you to bring the needle down into the fabric.
Raise the presser foot.
Pivot the fabric around the needle to change
sewing direction as desired. Lower the presser
foot and continue sewing in the new direction.
Finishing sewing
Press the reverse stitch lever and sew several
stitches in reverse at the end of the seam.
Raise the presser foot and remove the fabric,
drawing the threads to the back.
q
Draw the threads up and into the thread cutter.
The threads are cut the proper length for starting
the next seam.
q Thread cutter
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Seam guides on the needle plate
The seam guides on the needle plate help you to
measure seam allowance.
The numbers indicate the distance between the
center needle position and the seam guide.
q Seam guides
Number
15 20 4/8 5/8
1.5 2.0 1.3 1.6
1/2 5/8
6/8
1.9
3/4
Spacing (cm)
Spacing (inch)
q
Turning a square corner
The cornering guide helps you maintain a 5/8˝
(1.6 cm) seam allowance when sewing a corner.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and
lower the needle into the fabric by turning the
handwheel toward you.
Raise the presser foot and pivot the fabric so the
edge of the fabric will align with the 5/8˝ (1.6 cm)
seam guide.
Lower the presser foot and start stitching in the
new direction.
w
w Cornering guide
Download from Www.Somanuals.com. All Manuals Search And Download.
17
SECTION 4. UTILITY STITCHES
Basic Zigzag
w
q
e
Machine setting
q Stitch pattern:
w Stitch width:
C
1 – 5
e Stitch length: 0.5 – 3
r Thread tension: 2 – 5
r
t
t Presser foot: Zigzag foot A
Simple zigzag stitching is widely used for
overcasting, sewing on buttons etc.
Adjust the stitch length to suit your sewing needs.
NOTE:
Use a stabilizer for stretch fabrics such as tricot
and knits to prevent puckering.
Overcasting
q
w
e
Machine setting
q Stitch pattern:
w Stitch width:
C
5
e Stitch length: 1 – 2
r Thread tension: 3 – 7
r
t
t Presser foot: Zigzag foot A
Overcasting is used to prevent fabrics from
raveling at raw edges. It can be used to finish a
hem edge.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Knit Stitch
q
e
w
t
Machine setting
q Stitch pattern:
w Stitch width:
G
5
e Stitch length: S.S.
r
r Thread tension: 3 – 7
t Presser foot: Zigzag foot A
This stitch is ideal for finishing edges of stretch
fabrics. It seams and finishes the fabric edges
simultaneously.
Tricot Stitch (Multiple Zigzag Stitch)
Machine setting
q
w
e
q Stitch pattern:
w Stitch width:
e Stitch length: 0.5 – 1.5
r Thread tension: 3 – 6
D
3 – 5
r
t
t Presser foot: Zigzag foot A
This stitch is used to finish a raw edge on
synthetics and other fabrics that tend to pucker.
Place the fabric to leave a 5/8˝ (1.6 cm)
allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Straight Stretch Stitch
Machine setting
q
w
t
e
q Stitch pattern:
w Stitch width:
A
0 or 5
r
e Stitch length: S.S.
r Thread tension: 2 – 5
t Presser foot: Zigzag foot A
The pattern is sewn with two stitches forward and
one stitch backward, forming a seam that does
not rip easily.
Use it to reinforce areas such as crotch and
armhole seams.
Also use it when constructing items such as
backpacks for extra strength.
Carefully guide the fabric while sewing as the
fabric moves back and forth.
Zigzag Stretch Stitch
Machine setting
q
r
w
e
q Stitch pattern:
w Stitch width:
C
2 – 5
t
e Stitch length: S.S.
r Thread tension: 2 – 5
t Presser foot: Zigzag foot A
Sew on stretch fabrics in any area that you might
use a zigzag stitch.
This stitch is used as a decorative topstitch as
well.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Button Sewing
q
w
e
Machine setting
q Stitch pattern:
w Stitch width:
C
Adjust as necessary
r
t
e Stitch length: Any
r Thread tension: 3 – 7
t Presser foot: Zigzag foot A
y Feed dog:
Lowered
y
Unthread the needle. Adjust the stitch width to
match it with the span of the holes in the button.
Turn the handwheel to check if the needle enters
into each hole in the button.
Lower the foot to hold the button in place.
The holes in the button should align with the slot
of the foot.
A pin can be placed on the foot to form a shank.
Make sure to check if the needle enters into both
holes in the button.
q Pin
Re-thread the needle and sew about 10 stitches
and cut the needle and bobbin threads at the
beginning.
q
Raise the presser foot and remove the fabric. Cut
the needle and bobbin threads leaving 8˝ (20 cm)
tails.
w
Bring the needle thread between the button and
fabric through the holes in the button.
Pull the needle thread to pick bobbin thread up to
the right side of the fabric.
Wind the threads to from a shank and tie them
together.
e
w Needle thread
e Bobbin thread
NOTE:
Raise the feed dog after sewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
4-Step Buttonhole
Machine setting
q Stitch pattern:
q
w
e
w Stitch width:
4–5
t
e Stitch length: 0.5–1
r Thread tension: 1 – 5
r
t Presser foot: Sliding buttonhole foot J
z Set the pattern selector dial at “ ”.
Carefully mark buttonhole length on fabric.
Place the fabric under the foot with the
buttonhole marking running toward you.
Draw both of needle and bobbin thread to the
left. Move the slider toward you so that the top
mark w on the slider meets the start mark q.
q Start mark
z
q
w Top mark
e Needle thread
r Bobbin thread
e
w
r
NOTE:
The scale on the slider is engraved in
centimeters.
x
c
v
b
x Sew forward until you reach the front marking
of your buttonhole. Stop sewing at a left stitch.
c Raise the needle to its highest position.
Set the pattern selector dial at “ ”. Sew 5
stitches, then stop sewing at a right stitch.
v Raise the needle to its highest position.
Set the pattern selector dial at “ ”. Sew until
the needle reach the back marking of button
hole.
t
n
b Raise the needle to its highest position.
Set the pattern selector dial at “ ”.
Sew 5 stitches, then stop sewing. Set the stitch
length dial to “0” and the pattern selector dial at
straight sewing.
y
Sew a few locking stitches.
n Raise the needle and presser foot. Remove the
fabric from the machine and cut the sewing
thread. Insert a pin inside the bartack.
Then cut the opening with a seam ripper.
Take care not to cut the stitches.
t Needle thread
u
i
y Bobbin thread
To adjust buttonhole stitch density:
Set the stitch length dial between “
adjust the buttonhole stitch density.
u Denser buttonhole
” to
i Coarser buttonhole
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Corded Buttonhole
Machine setting
q Stitch pattern:
w
q
e
w Stitch width:
4–5
e Stitch length: 0.5–1
r Thread tension: 1 – 5
r
t
t Presser foot: Sliding buttonhole foot J
z With the buttonhole foot raised, hook the filler
cord on the spur at the back of the foot.
Bring the ends toward you under the foot,
clearing the front end.
z
Hook the filler cord into the forks on the front of
the foot to hold them tight.
q Spur
w Forks
q
w
x
x Draw both of needle and bobbin thread to the
left. Move the slider toward you so that the top
mark r on the slider meets the start mark e.
e Start mark
e
r Top mark
t Needle thread
y Bobbin thread
Lower the needle into the fabric at the setting
point and lower the foot.
Depress the foot control gently and sew the
buttonhole over the cord.
r
t
y
c
The sewing sequence is the same as the 4-
step buttonhole.
c Pull the left end of the filler cord to tighten it
and cut the excess tails.
To cut the buttonhole opening, refer to the
instructions on page 22.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Zipper Application
Machine setting
w
q
e
q Stitch pattern:
w Stitch width:
A
5
e Stitch length: 1.5 – 4
r Thread tension: 3 – 6
t
r
t Presser foot: Zipper foot E
Attaching the zipper foot
A: To sew the left side of the zipper, attach
zipper foot with the right side pin.
w
B: To sew the right side of zipper, attach the
q
zipper foot with the left side pin.
q Groove
w Pin
Fabric preparation
(A)
(B)
z Add 3/8˝ (1 cm) to the zipper size.
This is the overall opening size.
q Right side of the fabric
w 3/8˝ (1 cm)
o
u
y
z
e Opening size
r Zipper size
i
r
e
t Slider
y Zipper teeth
u Zipper tape
i Wrong side of the fabric
o End of the opening
w
t
q
x Place the right (top) sides of the fabric
together. Sew a bottom seam 5/8˝ (2 cm) from
the right edge to the zipper bottom stop
position. Sew a few stitches in reverse to lock.
Increase the stitch length to “4”, set needle
thread tension to “1”, and baste the entire
length of the fabric.
!
x
!
!
!
! 5/8˝ (2 cm)
! Basting
! Reverse stitch
! End of the opening
!
! Bottom seam
Download from Www.Somanuals.com. All Manuals Search And Download.
24
To sew
q
e
z
z Attach zipper foot with the right side pin.
Fold back the upper layer seam allowance.
Fold back the lower layer seam allowance to
leave a 1/8˝ (0.4 cm) margin of fabric.
q Lower layer
w
r
w End of the opening
e Zipper teeth
y
r 1/8˝ (0.4 cm) margin
t Upper layer
y Opening size
t
u Folded edge
i Basting
u
i
x Place zipper teeth next to margin edge and
baste the zipper tape to the lower fabric layer.
Align zipper foot with margin edge. Return
thread tension and stitch length to original
settings.
x
c
v
e
Sew a seam the entire length of zipper tape.
t
c Stop the machine 2˝ (5 cm) before reaching
the slider, with needle in the fabric and raise
the foot, then unzip a few inches to clear a
path for stitching.
o Slider
! 2˝ (5 cm)
o
!
v Remove fabric and close zipper. Take the
upper fabric layer and lay it flat over the
zipper.
Baste the zipper tape to the upper fabric layer.
! Basting
! Zipper tape
o
!
!
Download from Www.Somanuals.com. All Manuals Search And Download.
25
b Raise and release the foot, and re-attach it
with the left side pin.
b
Starting just below zipper bottom stop, sew
across fabric to about 3/8˝ (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
! Unstitch basting
!
!
! 3/8˝ (1 cm)
n Unzip a few inches to clear a path for
stitching.
n
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Blind Hemming
q
w
e
Machine setting
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
E or F
3 – 5
2 – 3
1 – 4
r
t
Blind hemming foot G
z On heavy weight fabrics that ravel, the raw
edge should be overcast first.
Fold the hem under the fabric as illustrated for
fine or medium fabrics.
z
w
w
q
q
e
Fold a hem with the wrong side up forming a
1/8˝ (0.5 cm) allowance.
q Wrong side of the fabric
r
w 1/8˝ (0.5 cm)
e Heavy weight fabric
r Fine and medium weight fabric
x Place the fabric so that the needle just pierces
the folded edge when the needle comes over
the extreme left side.
x
c
Lower the presser foot.
c Turn the screw to align the guide on the foot
with the folded edge so that the needle just
pierces the fold.
t
If the needle pierces too far left, move the
guide slightly to the left.
If the needle misses the fold, move the guide
slightly to the right.
Sew slowly while guiding the folded edge
along the guide.
y
u
t Screw
y Guide
u Folded edge
v
i
v Open and press the fabric after sewing is
finished.
i Right side of the fabric
NOTE:
If the needle drops too far left, the stitches will be
apparent on the right side of the fabric.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
SECTION 5. DECORATIVE STITCHES
Decorative Satin Stitches
Machine setting
q
w
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
J
3 – 5
0.5 – 1
1 – 4
e
Zigzag foot A
t
r
Determine the appropriate stitch density by test
sewing.
For a delicate appearance on fabric such as
chiffon, use a single layer with a tear-away
backing, if necessary. Reduce the needle thread
tension slightly to achieve the better result.
Decorative Stretch Stitches
Machine setting
q
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
A – J
5
S.S.
1 – 4
e
w
r
Zigzag foot A
t
Decorative stretch patterns are used for adding a
creative and personalized touch to items.
Carefully guide the fabric while sewing as the
fabric moves back and forth.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Smocking
q
w
Machine setting
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
D
5
S.S.
1 – 4
e
Zigzag foot A
r
t
Step 1:
Choose a soft and lightweight fabric such as
batiste, gingham or challis. Cut the fabric three
times wider than the project width.
Increase the stitch length to “4” and loosen
thread tension to “1”. Sew rows of straight
stitches 3/8˝ (1 cm) apart across the area to be
smocked.
q
q 3/8˝ (1 cm)
Step 2:
Knot the threads along one end. From the other
end, pull the bobbin threads to distribute gathers
evenly and secure the threads.
Return the thread tension to the original setting.
Sew rows of the smocking stitch between the
gathering stitches.
Remove the gathering stitches after finished.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Pin Tucking
q
w
e
Machine setting
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
A
0 or 5
1.5 – 3
2 – 6
r
t
Blind hemming foot G
Fold a fabric wrong side together and Lower the
needle into the fabric 0.1 – 0.2 cm inside the
folded edge.
q
Lower the foot and turn the screw to align the
guide on the foot with the folded edge.
Sew slowly while guiding the folded edge along
the guide.
w
e
Open the fabric and iron press the tucks.
q Screw
w Guide
e Folded edge
Shell Tucking
Machine setting
w
q
e
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
G
5
2 – 3
6 – 8
r
t
Zigzag foot A
Use a lightweight fabric (tricot, for example).
Fold and stitch on the bias.
When the needle swings to the right, allow the
needle to just clear the folded edge of the fabric.
After stitching, open the fabric and iron press the
tucks flat to one side.
NOTE:
Increase the needle thread tension to form
prominent tucks.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Fagoting
q
w
Machine setting
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
e
H
3 – 5
1 – 3
1 – 4
r
t
Zigzag foot A
Use this stitch to join two pieces of fabric to
create an open work appearance, and add design
interest.
Fold under each fabric edge 1/2˝ (1.3 cm) and
press.
Pin the two edges to a piece of paper or tear-
away backing 1/8˝ (0.3 cm) apart.
q Paper
Sew slowly, guiding the fabric so the needle
catches the folded edge on each side.
q
Tear away the backing after sewing is finished.
Patchwork
q
w
Machine setting
e
q Stitch pattern:
w Stitch width:
e Stitch length:
r Thread tension:
t Presser foot:
D
5
1 – 3
1 – 4
r
t
Zigzag foot A
Place two layers of the fabric with the right side
together. Seam along the edges with the straight
stitch.
Open fabrics flat and fold each seam allowances.
q
q
Place the fabric under the foot so that the seam
line matches the center of the foot width.
Lower the foot and sew the pattern along the
seam line.
q Right side of the fabric
Download from Www.Somanuals.com. All Manuals Search And Download.
31
SECTION 6. CARE AND
MAINTENANCE
WARNING:
Turn the power switch off and unplug the
machine before cleaning.
NOTE:
Do not dismantle the machine in any way other
than what is explained in this section.
Clean the outside of the machine with a soft
cloth and mild soap.
z
Cleaning the Hook Race and Feed Dogs
z Remove the presser foot and needle.
Remove screw on the needle plate with the
screwdriver.
q
Remove the needle plate and take out the
bobbin.
q Screw
x
x Lift up the bobbin holder and remove it.
w Bobbin holder
w
c
v
c Brush out dust and lint. Wipe the bobbin
e
r
holder with a soft, dry cloth.
v Clean the feed dogs and hook race with the
lint brush.
e Lint brush
r Feed dogs
b
b Wipe the hook race with a soft, dry cloth.
t Hook race
t
NOTE:
You may also use a vacuum cleaner.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Replacing the Bobbin Holder
z
x
z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits
next to the stopper on the race.
q Knob
w Stopper
w
q
c
c Replace the bobbin.
Attach the needle plate, inserting the two
guide pins into the holes in the needle plate.
Tighten the screw firmly with the screwdriver.
e Guide holes
e
r Screw
r
e
Replacing the Light Bulb
WARNING:
When replacing the bulb, switch off and unplug
the machine.
Wait for the light bulb to cool down before
touching it.
Remove the cap and screw. Remove the face
plate.
q
q Cap
e
w Screw
e Face plate
w
Push and turn the bulb counterclockwise to
remove it.
Push and turn the bulb clockwise to replace it.
r Light bulb
r
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Troubleshooting
Condition
The needle thread
breaks.
Reference
Cause
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
Page 11
Page 15
Page 7
Page 7
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not drawn to
the rear and set properly under the presser foot when
starting sewing.
6. The fabric is not drawn to the rear when sewing is finished.
7. The thread is too heavy or too fine for the needle.
Page 16
Page 16
Page 7
1. The bobbin thread is not threaded properly in the bobbin
holder.
The bobbin thread
breaks.
Page 10
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
4. The thread is wound loosely on the bobbin.
Page 32
Replace the bobbin
Re-wind the bobbin.
Page 7
The needle breaks.
1. Needle is incorrectly inserted.
Page 7
2. The needle is bent or blunt.
Page 7
3. The needle clamp screw is loose.
4. A proper foot is not used.
5. The fabric is not drawn to the rear when sewing is finished.
6. The needle is too fine for the fabric being sewn.
Use proper foot.
Page 16
Page 7
1. The needle thread tension is too loose.
2. The needle size is not suitable for the thread.
Page 15
Page 7
The needle thread
loops.
1. The needle is incorrectly inserted.
2. The needle is bent or blunt.
Page 7
Page 7
Skipped stitches
3. The needle and/or thread are not suitable for the fabric
being sewn.
Page 7
4. A blue tip needle is not used for sewing stretch, very fine
fabrics and synthetics.
Page 7
5. The needle thread is not threaded properly.
6. A poor quality needle is used.
Page 11
Replace the needle
Page15
Page 11
Page 7
Make stitch shorter
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
* Use a stabilizer for very fine fabrics.
Seam puckering
1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog was not raised after being lowered.
4. The foot pressure is not adjusted properly.
Page 32
Make stitch longer
Page 5
The cloth is not fed
smoothly.
Page 5
1. The machine is not plugged in.
2. Thread is caught in the hook race.
3. The handwheel is pulled for bobbin winding.
Page 4
Page 32
Page 9
The machine does
not work.
1. The stitch is not balanced.
Page 14
Patterns are distorted.
1. The stitch density is not suitable for the fabric being sewn.
2. Interfacing is not being used with stretch fabrics.
Page 22
Page Use interfacing
The buttonhole is
not sewn well.
1. The feed dog is packed with lint.
2. Lint has collected in the bobbin holder.
Page 32
Page 32
Noisy operation
Download from Www.Somanuals.com. All Manuals Search And Download.
34
507-800-XXX (EN)
Printed in Thailand
Download from Www.Somanuals.com. All Manuals Search And Download.
|