O
W N E R
’
S
M
A N U A L
C
O
L
O
R
T
E
L
E
V
I
S
I
O
N
ᮤ
–
VOLUME
MENU
+
ᮣ
▼
CHANNEL
▲
POWER
I M P O R T A N T !
Return Your W arranty Registration Card
W ithin 10 Days. See W hy Inside.
1 - IB7771 E001
TABLE OF CONTENTS
Introduction
FEATURES
Welcome/Registration of Your TV ............................2
Table of Contents.......................................................3
Features......................................................................3
Infrared Remote Control works your TV set and all
on-screen features.
Standard broadcast (VHF/UHF) or Cable TV
(CATV) channel capability.
Quick Use/Start Up Features
Closed Captioning allows the viewer to read TV
program dialogue or voice conversations as on-
screen text.
✧Antenna Hookups................................................4
✧Cable Hookups....................................................5
✧VCR to TV Hookups ....................................5, 19
✧Basic TV and Remote Operations ......................6
✧First Time Setup..................................................7
Automatic Programming of Channels for quick
and easy selection of favorite stations available in
your area.
On-Screen Features (in either English, French, or
Spanish) show helpful messages for setting of TV
controls.
On-Screen (MENU) Features
✧How to Set the TV for Closed Captioning .........8
✧How to Set the TV’s Clock.................................9
✧Using the Surf Control......................................10
✧How to Set the Sleep Timer Control.................11
✧Adjusting the TV Picture Controls ...................11
✧Using the TV’s Child Lock Control ...........12, 13
✧How to Set the TV’s Message Control.............14
✧Using the Smart Picture Control.......................15
✧Using the Smart Sound Control (AVL) ............16
✧Using the TV’s Volume Control .......................17
✧How to Set the TV’s Volume Limit Control.....17
✧Using the TV’s Audio/Video Input Jacks .........18
Audio/Video Jackpanel for direct connections with
VCRs (or other video accessories) providing quality
TV picture and sound playback.
Sleep Timer automatically turns the TV OFF at pre-
set times.
Clock Timer feature can turn ON the TV at any pre-
set time - just like an alarm clock.
General Information
Tips if Something Isn’t Working .............................19
Glossary of TV Terms..............................................20
Index ........................................................................21
Factory Service Locations..................................22-23
Warranty...................................................................24
NOTE: This owner's manual is used with
several different television models. Not all
features (and drawings) discussed in this
manual will necessarily match those found
with your television set. This is normal and
does not require you contacting your dealer
or requesting service.
Copyright © 1997 Philips Consumer Electronics Company. All rights reserved.
3 - IB7771 E001
SET-UP AND QUICK USE - ANTENNA HOOKUPS
ANTENNA
SMART
HELP
COMBINATION UHF/VHF
Remember,
combination antenna receives
Anormal broadcast channels
(VHF 2-13 and UHF 14-69). Your
connection is easy since there is
only one 75Ω (ohm) antenna plug
on the back of your TV - and
that’s where the antenna goes.
be sure to set the
TV for the type sig-
nal you've connect-
ed (see page 7.)
Combination VHF/UHF Antenna
(Outdoor or Indoor)
To set the TV to
select only the chan-
nel numbers in your
area see how to
“Program" or "Add"
channels in memory
on page 7.
BEGIN
300 to 75Ω
Adapter
(483521827003)
Back of TV
If your antenna has a round
cable (75 ohm) on the end, then
you're ready to connect it to the TV.
If your antenna has flat twin-lead
wire (300 ohm), you first need to
attach the antenna wires to the screws
on a 300 to 75 ohm adapter.
Twin Lead
Wire
To order any option-
al accessory contact
your dealer or call
the toll-free accesso-
ry ordering number
(1-800-292-6066):
75⍀
VIDEO
AUDIO
ANT
/
CABLE
I
Push the round end of the
adapter (or antenna) onto the
ANTENNA/CABLE plug on the rear
of the TV. If the round end of the
antenna wire is threaded, screw it
down tight.
Round Cable
• UHF/VHF
Combiner:
(SBV1133AO1)
• 75-300 Ohm
Adapter:
75Ω
2
1
(SBV1113AO1)
• 300-75 Ohm
Adapter:
(483521827003)
SEPARATE UHF/VHF
• Quick “F-type”
Extender:
(M61026)
For recessed
ANT/CABLE
connections.
ome of you may have two sep-
Sarate antennas. One antenna
is for VHF channels (2-13) and
the other antenna is for UHF
channels (14-69).
Outdoor VHF Antenna
(Twin-lead 300 Ohm)
Outdoor UHF Antenna
(Twin-lead 300 Ohm)
For homes with separate
UHF/VHF antennas, you will
need an optional "combiner"
before you can connect to the TV.
See the "Smart Help" section (to
the right on this page) for order-
ing details.
U/V Combiner
Round
End
Twin Lead
Wire
UHF
Outdoor VHF Antenna
(Round 75 Ohm cable)
300
Ω
BEGIN
V
F
VHF
75⍀
VIDEO
AUDIO
ANT
/
CABLE
IN
Attach the separate UHF and
VHF antennas to the correct screws
on the combiner.
Back of TV
ADAPTER
Ω
75-300 Ohm Adapter
Push the round end of the com-
biner onto the ANTENNA/CABLE
plug on the rear of the TV.
75-300
Round Cable 75Ω
4 - IB7771 E001
SET-UP AND QUICK USE - CABLE HOOKUPS
CABLE TV
SMART
HELP
CABLE INPUT/CONVERTER
Remember,
our home may use a single (75
Yohm) cable, or have a Converter
Box installation. Connect the thread-
ed end of the cable signal to the TV's
antenna plug and screw it down.
set the TV for the
type signal you've
just connected (see
page 7.)
NOTE: The connecting cable for
the Converter is supplied from
the Cable TV Company.
Cable TV Company
Cable TV Converter
Box Connection
To select only the
channel numbers on
your Cable system
see “Auto Install"
(page 7). If you use a
Cable Converter box,
set the TV to the
same channel as the
converter's CH 3/4
switch (on the rear of
the converter.)
OUT
IN
BEGIN
If your Cable TV signal is a single
round cable (75 ohm) then you're ready
to connect to the TV.
If you have a Cable TV Converter
Box: Connect the Cable TV signal to the
Cable Signal IN(put) plug on the
Converter.
Back of TV
Cable TV Signal Input
2
75⍀
VIDEO
AUDIO
OR
ANT
/
CABLE
IN
Connect the Cable TV cable to
the ANTENNA/CABLE plug on the
TV. If you have a Cable Converter
Box: Connect the Converter to the
ANTENNA/CABLE plug on the TV.
Round Cable
75Ω Ohm
1
SET-UP AND QUICK USE - VCR HOOKUP
VCR TO TV
BASIC CONNECTION
he basic Antenna, or Cable
TTV, to VCR to TV connection
is shown to the right. For more
information on other hookups
refer to your accessory VCR and
Cable Converter Owner's Manual
for details.
Outdoor VHF/UHF
Antenna
Back of TV
300 to 75Ω Ohm
Adapter
75⍀
VIDEO
ANT
/
CABLE
IN
BEGIN
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
Connect the OUT TO TV plug
on the VCR to the ANTENNA plug
on the TV (connecting cable supplied
with the VCR).
OUT TO TV
IN FROM ANT.
Round Cable
75Ω Supplied with VCR
Refer to the Owner's Manual
included with your VCR for other
possible connections and TV/VCR
operating details.
VCR
Cable TV signal
5 - IB7771 E001
SET-UP AND QUICK USE - TV AND REMOTE OPERATION
SMART
HELP
TELEVISION
Remember,
BEGIN
you can press any
button on the front
of the TV to turn the
TV ON. The tuned
channel number will
always briefly
appear when the TV
is first turned ON
(and with channel
changes). You can
also press the STA-
TUS button (on the
remote) to see what
channel the TV is
ON.
Press the POWER button to
turn the TV ON.
VOLUM E
S LEEP TIM ER
S ETUP
3 1
OFF
ᮣ
The SETUP on-screen
control is automatically
selected when you first
plug in your TV and press
the MENU button (on the
TV or remote.)
EXIT
ᮣ
Press the VOLUME UP (+) or
DOWN (-) button to adjust the
sound level.
BRIGHTN ES S
3 1
ᮤ
–
VOLUME
MENU
+
ᮣ
▼
CHANNEL
▲
POWER
Press the CHANNEL UP (▲) or
DOWN (▼) button to select TV chan-
nels.
3
2
1
ᮤ – VOLUME + ᮣ
▼
CHANNEL
▲
POWER
MENU
Connection for HEADPHONE use.
REMOTE
Channel Scan Button
Power Button
Press to turn TV ON and OFF.
Press to scan up or down through
channel numbers. (Also can be
used with the MENU button to
o load the supplied batteries into
Tthe remote:
select on-screen controls. With the
1. Remove the battery compartment
Volume (–) and (+) Buttons
Menu displayed, press Channel (+)
or (-) buttons to scroll through the
list of controls.)
Press to adjust the TV sound level.
When used with the MENU button,
press to adjust the selected on-
screen (MENU) feature controls.
lid on the back of the remote.
2. Place the batteries (2-AAA) in the
remote. Be sure the (+) and (-) ends
of the batteries line up correctly
(inside of case is marked.)
STATUS/EXIT
POWER
Status/Exit Button
Press to see the current channel
number on the TV screen. Also
press this button to clear the TV
screen after control adjustments.
CH
MENU
CH
Surf Button
VOL
VOL
Press to toggle between current and
previously viewed channel or have
up to 8 channels in a “Surf Ring.”
3. Reattach the battery lid.
MUTE
SURF
Menu Buttons
Press the MENU button to show
on-screen controls. Press Channel
(+) or (–) buttons to move through
the list of controls. Press the
Volume (+) or (–) buttons to adjust
the MENU controls.
Battery Lid
Number Buttons
1
4
2
5
8
0
3
6
Press two number buttons to select
TV channels. For example: to select
channel 6... press "0" first; then "6".
7
9
Mute Button
CC
SLEEP
Press to turn the TV sound OFF.
Press again to return the sound to
its previous level.
Sleep Button
Press to set the TV to automatically
turn itself OFF. See page 11, SLEEP-
TIMER control for details.
SMART SMART GAME CLOCK
Battery Compartment
CC Button
PICTURE SOUND
Press to select the Closed
Captioning mode. Choose either
CC-MUTE, CAPTION 1 (CC-1),
CAPTION 2 (CC-2), or OFF (CC-
OFF).
BEGIN
Point the remote control toward
the remote sensor window on the front
of the TV when operating the TV with
the remote.
Clock Button
Press to set the TV’s on-screen
clock and timer functions. (See page
9.)
Smart Picture Button
Press to select factory preset video
levels on a variety of program
sources. (See page 15.)
Game Button
Press to choose the TV’s
Audio/Video input jacks. Used
when a video game player is con-
nected. (See page 19 for more
details.)
Smart Sound Button
Press to control TV sound levels
during program changes or com-
mercial breaks. (See page 16.)
6 - IB7771 E001
SET-UP AND QUICK USE - FIRST TIME SET-UP CONTROL
SETUP MENU
Remember, SETUP is a first-use, one-
time operation and will not have to be
repeated (even if the TV is unplugged.)
AUTOMATIC SETTINGS
Main On-screen Menu
S URF
S URF
ᮣ
irst Time Setup takes care of some
Fbasic TV control settings for you.
Follow the steps in this section to
quickly add area channel numbers into
the TV’s memory, set the Language,
and the TV for Antenna or Cable sig-
nal.
M ES S AGE
S ETUP
ᮣ
1
EXIT
ᮣ
BRIGHTN ES S
3 1
4
3
ᮤ
–
VOLUME
MENU
+
ᮣ
▼
CHANNEL
▲
POWER
BEGIN
ENGLISH
SPANISH
FRENCH
Press MENU button on the
remote. An on-screen list of features
appears on the TV screen.
2
M AN UAL
EXIT
ᮣ
ᮣ
LAN GUAGE
TUN IN G
EN G
First Time Set-Up Menu
(See control explanations
shown below.)
CABLE
Press the CH (+) or (–) buttons on
the remote to scroll the on-screen menu
until the word SETUP appears within
the highlight box.
AUTO IN S TALL
ᮣ
OR
IDIOM A
LAN GUE
ES P
FR
31
28
20
8
Press the VOL (+) button to select
the SETUP on-screen menu. Then
press the CH (+) or (–) buttons to
scroll the SETUP options. Next press
the VOL (+) or (–) buttons as directed
to use the desired menu items.
1+2-3
LAN GUAGE
TUN IN G
EN G
CABLE
EXIT
ᮣ
EN G
TUN IN G
CABLE
LAN GUAGE
TUN IN G
AUTO IN S TALL
ᮣ
AUTO IN S TALL
CHAN N EL EDIT
M AN UAL
ᮣ
ᮣ
ᮣ
CABLE
ᮣ
CHAN N EL EDIT
M AN UAL
EXIT
ᮣ
ᮣ
ᮣ
AUTO IN S TALL
CHAN N EL EDIT
ᮣ
OR
Press the STATUS/EXIT button
on the remote to clear the screen
after an adjustment. You can also use
the “EXIT” option in the SETUP
screen and press the VOL (+) button
to bring you back to the main on-
screen menu.
You can also just wait and after a
minute the MENU will drop auto-
matically from the screen.
EXIT
ᮣ
1 2
AUTO S TORE
7
TUN IN G
AN TEN N A
CHAN N EL
SKIPPED
NO
CHAN N EL
SKIPPED
EXIT
1 2
NO
ᮣ
EXIT
CHAN N EL EDIT
M AN UAL
ᮣ
ᮣ
OR
SKIPPED
YES
EXIT
ᮣ
LAN GUAGE
TUN IN G
EN G
CABLE
BACK TO M AIN M EN U
LANGUAGE - The Language feature allows the user to
change the on-screen menu text to ENG (English), ESP
(Spanish), or FR (French). Note, this will not change the
text within features such as Closed Captioning.
CHANNEL EDIT - Allows you to add or delete channels
manually. Enter the channel you want to skip. Then set
the SKIPPED feature to YES or NO. (If YES is selected,
ENGLIS
SPANISH
FRENCH
1+2-3
the channel will not appear within the CH (+) or (-) ring. If NO is
selected, the channel will appear when you scan channels in the
TV’s memory.)
TUNING - This feature sets the TV in the proper signal
mode. If you have a signal coming from a Cable TV com-
pany or Cable Box; select CABLE from the menu. If you
EXIT - When the EXIT option is selected, the main menu
are using an indoor or outdoor antenna, select ANTENNA from the
menu.
will return to the screen.
EXIT
AUTO INSTALL - After correctly setting the TUNING
mode, AUTO INSTALL will read all the available channels
31
28
20
8
and store them into the TV’s memory. This will allow you
to use the CHANNEL (+) or (-) buttons to scan through
the channels you have available.
7 - IB7771 E001
HOW TO USE THE CLOSED CAPTION CONTROL
CLOSED CAPTIONING
losed Captioning allows you to
Cread the voice content of televi-
sion programs on the TV screen.
Designed to help the hearing
1 2
CAP TION 1
impaired, this feature uses on-screen
"text boxes" to show dialogue and
conversations while the TV program
is in progress.
1 2
CAP TION 2
OR
Note: Broadcast stations will often
use spelling abbreviations, symbols,
dropouts and other grammatical
shortcuts in order to keep pace with
the on-screen action. These type fac-
tors vary upon the source of the cap-
tioned text material and do not indi-
cate a need for service on the part of
the TV.
OR
1 2
CAP TION M UTE
BEGIN
2
Press the CC button on the remote
control repeatedly to select the Closed
Captioning mode you desire (CAP-
TION 1, CAPTION 2, CAPTION
MUTE, and CAPTION OFF).
TATUS/EXIT
POWER
CH
MENU
CH
VOL
VOL
MUTE
SURF
Note: Usually “Caption 1" is the
most used mode to view captioned
material.
1
4
2
5
8
0
3
6
OR
1 2
CAP TION OFF
7
9
CC
Press the STATUS button after
making your Caption mode selec-
tion. The TV display will clear and
Captioning material (if available on
the currently selected TV program)
will appear on the TV screen.
SLEEP
1
SMART SMART GAME CLOCK
PICTURE SOUND
To cancel, set the CAPTION feature
to CAPTION OFF when finished
viewing.
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
SMART HELP
NOTE: The “CC-MUTE” setting
automatically switches the TV to
the CC-1 mode whenever the
MUTE button (on the remote con-
trol) is pressed. The CC-1 mode
will turn OFF when the TV
Remember, not all TV
programs and product com-
mercials are made for broadcast with
Closed Caption (CC) information
included. Neither are all Closed
Caption modes (CAPTION 1 or
CAPTION 2) necessarily being used
by a broadcast station during the
transmission of a closed caption pro-
gram. Refer to your area's TV pro-
gram listings for the stations and
times of Closed Caption shows.
sound is returned or unmuted.
Caption 1 or Caption 2 mode: dialogue
(and descriptions) for the action on the
captioned TV program shows on-screen.
(See Smart Help on this page.)
8 - IB7771 E001
HOW TO USE THE TV CLOCK CONTROL
SETTING THE TV CLOCK
our TV comes with an on-screen
Yclock. During normal operation
the clock appears on the screen with
every channel change. This Clock
also features a TIMER. The TV can
be programmed to turn itself ON at a
specific time and be tuned to a spe-
cific channel.
S ET TIM ER
EXIT
--:--AM
ᮣ
S ET CLOCK
TIM ER
--:--AM
OFF
1 2
CHAN N EL
S ET TIM ER
EXIT
--:--AM
BEGIN
ᮣ
SET CLOCK 1 1 :2 0 AM
Press the CLOCK button on the
remote control to bring up the on-
screen menu with the SET CLOCK
feature highlighted.
TIM ER
OFF
1 2
CHAN N EL
4
Press the Channel Number but-
tons to enter the current time.
(Example: 0, 7, 4, 5 for 7:45.)
TATUS/EXIT
POWER
CH
MENU
CH
3
2
VOL
VOL
MUTE
SURF
Press the VOL (+) button to set
for AM or PM.
1
4
2
5
8
0
3
6
Press the STATUS/EXIT but-
ton to clear the screen when you
have finished.
7
9
CC
SLEEP
1
SMART SMART GAME CLOCK
PICTURE SOUND
SETTING THE TV TIMER
BEGIN
TIM ER
OFF
1 2
CHAN N EL
Press the CLOCK button on the
remote control to bring up the on-
screen menu, then press the CH (+)
or (-) buttons to scroll the on-screen
menu until the words SET TIMER
appear within the highlight box.
S ET TIM ER 1 2 :0 0 P M
EXIT
ᮣ
SET CLOCK 1 1 :2 0 AM
EXIT
ᮣ
SET CLOCK 1 1 :2 0 AM
Press the CHANNEL Number
buttons to enter the time you want
the TV to turn on (Use the VOL (+)
to set the AM or PM).
TIM ER
ON
1 2
CHAN N EL
S ET TIM ER 1 2 :0 0 P M
5
3
Press the CH (+) or (-) button to
scroll the menu to the word TIMER.
TATUS/EXIT
CH
MENU
CH
4
VOL
VOL
Press the VOL (+) or (-) button
to turn the TIMER feature ON.
MUTE
SURF
Press the STATUS/EXIT button
to clear the screen when you have
finished.
1
4
2
5
8
0
3
6
2
1
7
9
CC
SLEEP
SMART SMART GAME CLOCK
PICTURE SOUND
9 - IB7771 E001
HOW TO USE THE SURF CONTROL
SMART
HELP
”list” or series of previously
Aviewed channels can be selected
with the SURF button on your remote
control. With this feature you can
easily switch between different TV
programs that currently interest you.
The Surf control allows you to set up
to 8 channels in its quick viewing
“list”.
To Use
A/CH (Alternate
Channel):
CHILD LOCK
CLOCK
ᮣ
ᮣ
8
S URF
A/ CH
ᮣ
M ES S AGE
S ETUP
1 0
ᮣ
With the A/CH con-
trol ON, select the
two desired chan-
nels for viewing
with the number
buttons on the
BEGIN
Press the MENU (M) button on
the remote, then press the CHANNEL
▲ or ▼ buttons to select the word
SURF with the TV’s on-screen arrow.
With A/CH selected, pressing the
SURF button will toggle between the
current and one previous channel
remote control.
3
Press the SURF
button on the
remote to “toggle”
between the two
selected channels.
2
Press the (+) button to select
either A/CH (Alternate Channel) or
SURF. (See explanation of Surf
options with the illustration on this
page.)
TATUS/EXIT
POWER
CH
VOL
VOL
MENU
MU
CH
SURF
4
2
5
8
0
3
6
When using SURF:
1
Press STATUS button to clear the
screen.
Remember, you can
add as many as
eight channels in
the Smart Surf
Memory.
7
9
CC
SLEEP
SMART SMART GAME CLOCK
PICTURE SOUND
With SURF selected, pressing the
SURF button will toggle current and
up to seven additional channels avail-
able. Note: the Channel Surf can be
used with fewer than eight channels.
In this way the number of Surf chan-
nels can match or fit your present
viewing interests.
How To Use SURF
8
BEGIN
CHILD LOCK
CLOCK
ᮣ
S URF
ᮣ
S URF
ᮣ
1 0
S URF
With the SURF control ON (see
above), select a desired channel for
viewing. You can use the number
buttons on the remote (or the
S URF
M ES S AGE
S ETUP
1 3
ᮣ
S URF
1 8
S URF
2 2
Channel ▲ or ▼ buttons).
S URF
2 8
S URF
Press the SURF button on the
remote while the channel display is
still present on the TV’s screen.
3 6
S URF
4 1
S URF
Press the SURF button on the
remote to quickly review current
action on channels contained within
the Surf list.
STATUS/EXIT
POWER
2
CH
3
VOL
VOL
MENU
MUTE
CH
SURF
Note: There are two methods to delete channels from the 8-chan-
nel SURF control ring:
Repeat steps above to add up to eight
channels in the SURF channel mem-
ory ring.
To remove all channels from the SURF memory (with the
exception of one channel which will be left within the SURF
list):
1
4
2
5
8
0
3
6
• Select the SETUP control in the on-screen menu and press the
VOL (+) button. Select the TUNING control and press the VOL
(+) button twice changing CABLE to ANTENNA; then back to
CABLE (or ANTENNA to CABLE; then back to ANTENNA).
9
SLEEP
1
SMART SMART GAME CLOCK
• Or, with the SURF control selected press the VOL (+) button
twice changing SURF to A/CH; then back to SURF.
PICTURE SOUND
10 - IB7771 E001
HOW TO USE THE SLEEP TIMER CONTROL
SMART
HELP
SLEEPTIMER
On-screen adjustment
ave you ever fallen asleep in
Hfront of the TV only to have it
wake you up at two in the morning
with a test pattern screeching in your
ears? Well, your TV can save you all
that trouble by automatically turning
itself off.
Remember. If
OFF
you ever want to see how
many minutes are left
before the TV shuts itself
off, press the STATUS
button on the remote.
1 5 M IN
3 0 M IN
4 5 M IN
6 0 M IN
7 5 M IN
BEGIN
Press the SLEEP button repeat-
edly to pick the amount of time (15
minutes to 2 hours ahead) before the
TV will turn itself off.
If you want to stop a
SLEEP TIMER setting,
reset the timer back to
OFF. You could also turn
the TV off, and then back
on again, to cancel a set-
ting.
9 0 M IN
1 0 5 M IN
1 2 0 M IN
The VOL (+) or (-) buttons can also
be used to set the amount of time
within the on-screen menu.
2
TATUS/EXIT
POWER
CH
MENU
CH
VOL
VOL
Press the STATUS/EXIT button
to clear the screen after you have set
the time for the TV to turn off.
Pressing any key on the
remote or TV in the last
60 seconds will cancel the
SLEEP TIMER setting.
MUTE
SURF
1
4
2
5
8
0
3
6
An on-screen count down will appear
during the last minute before the TV
shuts itself off.
5 8 S EC
7
9
1
CC
SLEEP
An on-screen count down will
appear during the last minute of a
SLEEP TIMER setting.
SMART SMART GAME CLOCK
PICTURE SOUND
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
SMART
o adjust your TV picture con-
Ttrols, select a channel and follow
BEGIN
HELP
the steps shown below:
S ETUP
ᮣ
ᮣ
BRIGHTNESS
EXIT
EXIT
ᮣ
3 1
3 1
3 1
3 1
Press VOL (-) or (+) until
darkest parts of the picture are
as bright as you prefer.
BRIGHTN ES S
COLOR
3 1
3 1
3 1
BRIGHTN ES S
COLOR
P ICTURE
P ICTURE
S HARP N ES S
Press the MENU button on the
remote, then press the CH (+) or (–)
to scroll the on-screen menu until the
desired control appears within the
highlight box.
PICTURE Press VOL (-) or
(+) until lightest parts of the
picture show good detail.
3 1
3 1
3 1
3 1
COLOR
P ICTURE
S HARP N ES S
TIN T
COLOR Press VOL (-) or
(+) to add or eliminate color.
3 1
3 1
3 1
TINT Press VOL (-) or (+) to
obtain natural skin tones.
3
P ICTURE
Press the VOL (+) or (-) to
adjust the selected picture control
levels. (Refer to the Smart Help box
for more detail on each control.)
S HARP N ES S
TIN T
1
SHARPNESS Press VOL (-)
or (+) to improve detail in the
picture.
STATUSXIT
COL TEM P
COOL
CH
VOL
VOL
3 1
3 1
MENU
S HARP N ES S
MUTE
CH
SURF
COLOR TEMP Press VOL
(-) or (+) to select NORMAL,
COOL, or WARM picture
preferences. (NORMAL will
keep the whites, white; COOL
will make the whites, bluish;
and WARM will make the
whites, reddish.)
TIN T
COL TEM P
AI
COOL
ON
Press STATUS/EXIT button (or
use the EXIT control in the Menu) to
clear the screen when picture adjust-
ments are completed.
1
4
2
5
8
0
3
6
2
3 1
7
9
TIN T
CC
SLEEP
COL TEM P
AI
COOL
ON
SMART SMART GAME CLOCK
VOLUM E
1 5
PICTURE SOUND
AI (Artificial Intelligence)
Press the VOL (-) or (+) to turn
AI ON or OFF. When ON, AI
increases the picture’s contrast
making the dark areas more
black and the light areas more
white. This is especially good
for dark scenes or programs.
COL TEM P
COOL
ON
AI
VOLUM E
AVL
1 5
ON
11 - IB7771 E001
HOW TO USE THE CHILD LOCK CONTROL
SETTING THE ACCESS CODE
or program broadcasts unsuitable
Ffor younger viewers, the Child
Lock feature allows you to block out
certain channels from your viewing
choice. When a channel is “locked,” it
will be skipped or unavailable for
selection when scanning or changing
channels.
IN P UT
TUN ER
OFF
ᮣ
S LEEP TIM ER
CHILD LOCK
CLOCK
ᮣ
Follow the steps listed below to first
set a personal access code for your TV.
S URF
A/ CH
CODE
EXIT
- - - -
BEGIN
ᮣ
Press the MENU (M) button on
the remote, then press the CH (+) or
(–) to scroll the on-screen menu until
the words CHILD LOCK appear
within the highlight box.
CODE
EXIT
XXXX
ᮣ
Press the VOL (+) button to
select the CHILD LOCK feature.
2
STATUS/EXIT
POWER
Enter the default code with the
Channel Number buttons (8888).
This will gain you access to the
CHILD LOCK menu.
CH
VO
VOL
LOCK
EXIT
N O
ᮣ
MENU
CH
SURF
4
CODE
XXXX
1
3
CON FIRM CODE - - - -
The CHILD LOCK menu will
appear with “CODE - - - -” high-
lighted.
1
4
2
5
8
0
3
CHAN N EL
1 2
7
9
Enter your NEW Code using
the Channel Number buttons (dig-
its 0-9). Press the CH (-) button to
scroll to CONFIRM CODE and re-
enter the same NEW Code number.
CC
SLEEP
SMART SMART GAME CLOCK
EXIT
ᮣ
PICTURE SOUND
CODE
XXXX
CONFIRM CODE XXXX
CHAN N EL
LOCK
1 2
After the new code is entered you
will have the option to EXIT the
CHILD LOCK feature or you can
re-enter your new code to gain access
to the menu again.
N O
To lock out specific channels or make
changes to the CHILD LOCK menu
please continue to the next page.
EXIT
ᮣ
CODE
- - - -
12 - IB7771 E001
HOW TO USE THE CHILD LOCK CONTROL
USING THE CHILD LOCK FEATURE
fter your personal access Code
Anumber has been set (see previ-
ous page), you are now ready to
select the channels you want to block
out or censor.
IN P UT
TUN ER
OFF
ᮣ
S LEEP TIM ER
CHILD LOCK
CLOCK
ᮣ
BEGIN
S URF
A/ CH
Press the MENU (M) button on
the remote, then press the CH (+) or
(–) to scroll the on-screen menu until
the words CHILD LOCK appear
within the highlight box.
CODE
EXIT
- - - -
ᮣ
Press the VOL (+) button to
select the CHILD LOCK feature.
CODE
EXIT
XXXX
ᮣ
4
Enter the correct 4-digit access
Code. This will gain you access to
the CHILD LOCK menu.
5
2
STATUS/EXIT
OWER
The CHILD LOCK menu will
appear with CODE highlighted.
CH
VO
VOL
LOCK
EXIT
N O
ᮣ
MENU
CH
SURF
6
ENTER YOUR 4-DIGIT ACCESS
CODE AGAIN.
CODE
XXXX
1
3
CON FIRM CODE - - - -
1
4
2
5
8
0
3
6
CHAN N EL
1 2
Press the CH (+) or (-) buttons
to scroll the menu to CHANNEL.
Using the Channel Number buttons
enter the channel you want to “lock.”
9
6
SLEEP
SMART SMART GAME CLOCK
Then press the CH (+) or (-) but-
CODE
XXXX
PICTURE SOUND
tons to scroll the menu to LOCK.
CONFIRM CODE - - - -
CHAN N EL
LOCK
1 2
N O
ᮣ
Press the VOL (+) button to
choose YES or NO within the
LOCK control.
EXIT
IMPORTANT: Press the CH
(+) or (-) buttons to scroll to CON-
FIRM CODE and you must enter
your 4-digit access Code to set or
save the changes into memory.
EXIT
ᮣ
CONFIRM CODE - - - -
CODE
XXXX
CHAN N EL
LOCK
1 2
YES
CONFIRM CODE XXXX
CHAN N EL
LOCK
1 2
EXIT
ᮣ
N O
CODE
XXXX
SMART HELP
1 2
Remember, to save the
changes and limit the access to
certain channels, you MUST re-enter
your access code within the CON-
FIRM CODE option. Not doing so
will allow viewers to change these
settings without having to use the
personal access CODE.
EXIT
ᮣ
LOCKED
CODE
- - - -
13 - IB7771 E001
HOW TO USE THE MESSAGE CONTROL
SETTING AN ON-SCREEN MESSAGE
ou can program a two line mes-
Ysage (up to 40 characters in
length) to appear every time the TV
is powered on. This feature can be
used as a reminder for yourself or
other family members.
CLOCK
S URF
ᮣ
A/ CH
ᮣ
BEGIN
M ES S AGE
S ETUP
EXIT
Press the MENU (M) button on
the remote, then press the CH (+) or
(–) to scroll the on-screen menu until
the word MESSAGE appears within
the highlight box.
ᮣ
CLEAR
EXIT
ᮣ
ᮣ
ᮣ
M ES S AGE
LIN E 1
LIN E 2
ON
ᮣ
ᮣ
Press the VOL (+) button to
access the MESSAGE feature.
Press the VOL (+) button again to
turn the MESSAGE feature ON.
EXIT
ᮣ
ON
ᮣ
4
Press the CH (+) or (-) buttons
to scroll the on-screen menu to LINE
1. Then, press the VOL (+) button
to access the LINE 1 menu.
M ES S AGE
LIN E 1
LIN E 2
CLEAR
2
ᮣ
TATUS/EXIT
POWER
ᮣ
CH
VO
VOL
MENU
CH
Using the CH (+) or (-) buttons,
scroll through the list of characters.
Use the VOL (+) or (-) buttons to
move sideways from letter space to
letter space (LINE 1 holds up to 20
characters). If more space is required
repeat the process with the LINE 2
control.
SURF
1
1
4
2
5
8
0
6
3
LIN E 1
7
9
CC
GOOD M ORN IN G
SLEEP
SMART SMART GAME CLOCK
PICTURE SOUND
The CLEAR on-screen control can
be used to remove a message that has
been entered into the TV’s memory.
1 2
Press the STATUS/EXIT button
when finished to clear the screen of
the menu list.
GOOD M ORN IN G
SMART HELP
Remember, LINE 1 and
LINE 2 hold up to 20 charac-
ters in memory.
NOTE: The LED on the TV will blink continually
while the TV is off if a message has been programmed.
When the MESSAGE control is
turned ON, the message you pro-
grammed will appear whenever the
TV is powered ON. (The message
will disappear as soon as a button on
the remote is touched.)
14 - IB7771 E001
HOW TO USE THE SMART PICTURE CONTROL
hether you're watching a movie or
Wa video game your TV has auto-
matic video control settings matched for
your current program source or content.
The Smart Picture feature quickly resets
your TV's video controls for a number
of different types of programs and view-
ing conditions you may have in your
home. Each Smart Picture setting is
preset at the factory to automatically
adjust the TV's Picture, Color, and
Sharpness viewing control levels.
P ERS ON AL
BEGIN
Press the Smart Picture button on
the remote to activate the SMART
PICT feature.
OR
M OVIES
Press the Smart Picture button
repeatedly to select between 5 differ-
ent picture presets: Personal, Movies,
Sports, Weak Signal, or Video Games.
OR
3
Press the STATUS/EXIT button to
clear the screen when finished with
your selection.
S P ORTS
STATUS/ET
POWER
CH
VOL
VOL
MENU
OR
MUTE
CH
SURF
W EAK S IGN AL
SMART HELP
1
4
2
5
8
3
6
Remember, the video con-
trol settings for the Smart
Picture categories are memorized
into the TV at the factory and can
only be reset by field and service
technicians.
2
OR
7
VIDEO GAM ES
1
CC
SMART AME CLOCK
PICTURE SOUND
With the PERSONAL setting chosen,
any adjustments made to the picture
controls will be held in the TV’s
memory.
15 - IB7771 E001
HOW TO USE THE SMART SOUND CONTROL
re you tired of the sound of com-
Amercials following you into the
next room or all through the house?
Smart Sound allows you to preset a
desired volume level that the TV
sound will not go above. This makes
for an even, more consistent sound
by reducing the peaks and valleys
that can occur during program
changes or commercial breaks.
S M ART S OUN D ON
BEGIN
Press the Smart button on the
remote to activate the SMART
SND feature.
OR
S M ART S OUN D OFF
Press the Smart Sound button
repeatedly to toggle the SMART
SOUND control ON or OFF.
3
Press the STATUS/EXIT but-
ton to clear the screen when com-
pleted.
STATUS/EIT
POWER
CH
MENU
CH
VOL
VOL
MUTE
SURF
SMART HELP
1
4
2
5
8
0
3
6
Remember, Smart Sound
works only with the programs
coming through the Antenna/Cable
input on the rear of the TV (RF
audio). It will not control the sound
levels for the Auxiliary (VCR/AUX
IN) audio inputs.
2
7
9
1
CC
SMART SMARGCLOCK
PICTURE SOUND
AI
ON
VOLUM E
AVL
1 5
ON
ON
VOLUM E LIM IT
IN P UT
TUN ER
OR
AI
ON
1 5
VOLUM E
AVL
OFF
ON
VOLUM E LIM IT
IN P UT
TUN ER
Please note that SMART SOUND is the same feature as AVL within the on-screen
menu system. When Smart Sound is changed the AVL control will also change (and
vice versa).
16 - IB7771 E001
HOW TO USE THE VOLUME CONTROLS
VOLUME CONTROL
SMART
HELP
se the Volume control to set the
UTV’s volume level on the TV
screen. The Volume level or scale
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed. (0 being the lowest, 63
being the highest.)
COL TEM P
AI
COOL
ON
Try it out.
Press the VOL (+) or
(–) buttons. The
VOLUME indicator
should appear at the
bottom of the screen.
VOLUM E
AVL
1 5
ON
VOLUM E LIM IT
ON
BEGIN
If the VOLUME
LIMIT control is
turned on (see
Press the MENU button on the
remote, then press the CH (+) or (–)
to scroll the on-screen menu until the
word VOLUME appears within the
highlight box.
below), the TV
3
sound cannot be
adjusted beyond its
current settings (for
VOLUM E
1 5
TATUS/EXIT
POWER
CH
VOL
VOL
Press the VOL (+) or (-) buttons
to adjust the volume level.
MENU
example
25).
E
CH
SURF
1
1
4
2
5
8
0
3
6
When the Volume button is pressed
an on-screen display will appear.
Press STATUS/EXIT button to
clear the screen.
2
7
9
CC
SLEEP
SMART SMART GAME CLOCK
PICTURE SOUND
SMART
HELP
LIMITING THE VOLUME
ou can limit the maximum vol-
Yume level of the TV set. Once the
Volume Limit control is set the TV
sound cannot be played louder than
the maximum preset level.
Remember,
the VOLUME
LIMIT control (when
ON) will not allow
TV sound to exceed
the set VOLUME
level. (See VOL-
UME control section
shown above.)
VOLUM E
AVL
1 5
ON
ON
BEGIN
VOLUM E LIM IT
IN P UT
TUN ER
OFF
Press the MENU button on the
remote, then press the CH (+) or (-)
to scroll the on-screen menu until the
S LEEP TIM ER
OR
VOLUM E
AVL
1 5
ON
ON
words VOLUME LIMIT appears
within the highlight box.
VOLUM E LIM IT
IN P UT
TUN ER
OFF
S LEEP TIM ER
Press the VOLUME (+) or (–)
button to turn the VOLUME LIMIT
control ON.
3
TATUS/EXIT
POWER
Press the STATUS/EXIT button
to clear the screen.
CH
VOL
VOL
MENU
E
CH
SURF
1
1
4
2
5
8
0
3
6
2
NOTE: Not all features (and draw-
ings) discussed in this section will nec-
essarily match those found with your
television set. This is normal and does
not require you contacting your dealer
or requesting service.
7
9
CC
SLEEP
SMART SMART GAME CLOCK
PICTURE SOUND
17 - IB7771 E001
HOW TO USE THE INPUT CONTROL
ou can view the playback of
YVCR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
AVL
ON
ON
For example: to view the play-
back of a VCR tape:
BEGIN
1
VOLUM E LIM IT
IN P UT
BACK OF TV
EXT 1
OFF
ᮣ
S LEEP TIM ER
CHILD LOCK
Connect the VIDEO and
AUDIO IN(put) jacks on the TV
to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
75⍀
ANT /
CABLE
VIDEO
AUDIO
IN
Press the MENU (M) button
on the remote, then press the CH
(+) or (-) buttons to scroll the on-
screen menu until the word
INPUT appears within the high-
light box.
VIDEO IN
AUDIO IN
RCA PHONO
PLUG CABLES
(NOT SUPPLIED)
Note: You can press the CHAN-
NEL ▲▼ buttons to select
“EXT1.”
OUT
OUT
AUDIO
IN
ANTENNA
OUT
STATUS/EXIT
POWER
VIDEO
ANTENNA
IN
Press the (+) button to select
the EXT1 inputs on the rear of
the TV.
CH
VOL
VOL
IN
MENU
BACK OF VCR
E
CH
SURF
Turn the VCR ON and PLAY
the VCR tape to be viewed on the
TV.
2
1
4
2
5
8
0
3
6
3
7
9
CC
SLEEP
VCR
4
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
SMART SMART GAME CLOCK
PICTURE SOUND
SMART HELP
Pressing the GAME button on the remote will
switch to the Audio/Video Inputs at the back of the
TV.
Remember, when you're
through using the EXT1
When the GAME button is pressed, a “GAMES 1”
on-screen display will appear to indicate the mode
has been selected.
INPUT jacks, return the INPUT
to TUNER. If you leave the TV in
the EXT1 INPUT mode and there
is no signal source connected to
the jacks, you will be seeing only
a blank screen on the TV.
NOTE: The GAME button on the remote will only
work with select models. Your model may or may
not contain this feature.
NOTE: If you have a mono (sin-
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con-
nect to the audio inputs on the TV.
GAM ES 1
18 - IB7771 E001
TIPS IF SOMETHING ISN’T WORKING
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
lease make these simple
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal TV viewing.
Pchecks before calling for ser-
vice. These tips can save you
time and money since charges for
TV installation and adjustment of
customer controls are not cov-
ered under your warranty.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
• Check to be sure outlet is not on a wall switch.
No Power
No Picture
• Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug ?
• Check the TUNING ANTENNA/CABLE control for correct position.
• Check INPUT control for correct position. The EXT 1 position with out a signal
source will result in a blank screen.
• Check the VOLUME buttons.
• Check VOLUME LIMIT control.
• Check the MUTE button on the remote control.
• If attempting auxiliary equipment hook-ups, check audio jack connections.
No Sound
• Check batteries. Replace with AAA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
• Clean the remote and the remote sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
Remote Does Not
Work
• Check to be sure TV outlet is not on a wall switch.
TV Displays Wrong
Channel or No
Channels Above 13
• Repeat channel selection.
• Add desired channel numbers (CHANNEL EDIT control) into TV memory.
• Check TUNING ANTENNA/CABLE control for correct position.
This TV is equipped with protective circuitry that shuts the TV off in case of moderate
power surges. Should this occur turn the TV back on by pressing the POWER button
once or twice, or unplug (wait 10 seconds) and then replug the power cord at the AC
outlet. This feature is NOT designed to prevent damage due to high power surges such
as those caused by lightning, which is not covered by your warranty.
Cleaning and Care
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean
dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the cabinet back.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
19 - IB7771 E001
GLOSSARY OF TERMS
Round Cable 75Ω * A single solid antenna wire normally
Programming * The procedure of adding or deleting channel
numbers into the Television’s memory circuits. In this way the
Television “remembers’’ only the locally available or desired
channel numbers and skips over any unwanted channel numbers.
matched with a metal plug (F-type) end connector that screws (or
pushes) directly onto a 75 Ohm input found on the Television or
VCR. (Also known as Coaxial Cable.)
Closed Caption * Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses on-screen
"text boxes" to show dialogue and conversations while the TV pro-
gram is in progress.
Remote Sensor Window * A window or opening found on the
Television control panel through which infrared remote control
command signals are received.
Setup Mode * Automatic feature control settings made by the TV.
Designed for first time set-up and use. Settings for signal connec-
tions (antenna or cable TV), plus channel program memory are
held in the TV's memory (even if the set is unplugged and moved
to a new location.)
Audio/Video Inputs * Located on the rear of the TV these con-
nectors (RCA phono type plug) are used for the input of audio
and video signals. Designed for use with VCRs (or other acces-
sories) in order to receive higher picture resolution and offer sound
connection options.
Status/Exit * Allows the user to quickly confirm what channel
number is currently being viewed. Status can also be used to clear
the Television of on screen displays or information (rather than
waiting for the displays to “time out” or automatically disappear
from the screen).
On Screen Displays (OSD) * Refers to the wording or messages
generated by the television (or VCR) to help the user with specific
feature controls (color adjustment, programming, etc.).
Menu * An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.
Twin Lead Wire * The more commonly used name for the two
strand 300 Ohm antenna wire used with many indoor and outdoor
antenna systems. In many cases this type of antenna wire requires
an additional adapter (or balun) in order to connect to the 75 Ohm
Input terminals designed into the more recent Televisions and
VCRs.
Multichannel Television Sound (MTS) * The broadcast standard
that allows for stereo sound to be transmitted with the TV picture.
20 - IB7771 E001
INDEX
Accessories/Optional .............................................................................4, 5
Message Control ......................................................................................14
Minus(-)/Plus (+) Buttons..........................................................................6
Picture Controls .................................................................................11, 15
Precautions/Safety .........................................................................2, 19, 24
Programming Channels..............................................................................7
Remote Control..........................................................................................6
Requesting Service.......................................................................19, 22-23
Round Cable 75Ω ..................................................................................4, 5
Safety/Precautions .........................................................................2, 19, 24
Set Up/First Time Use............................................................................4-7
Sleep Timer ..............................................................................................11
Smart Picture............................................................................................15
Smart Sound.............................................................................................16
Surf...........................................................................................................10
Status Button..............................................................................................6
Tips for Service ......................................................................19, 22-23, 24
VCR/TV Connections..........................................................................5, 18
Volume Control........................................................................................17
Volume Limit Control..............................................................................17
Warranty...................................................................................................24
Adapter Connector.................................................................................4, 5
Add/Delete Channels.................................................................................7
Alternate Channel ....................................................................................10
Artificial Intelligence (AI).......................................................................11
Audio/Video Input Jacks..........................................................................18
Battery Installation.....................................................................................6
Cable TV Connections...............................................................................5
Channel Memory .......................................................................................7
Child Lock Control............................................................................12, 13
Clock..........................................................................................................9
Closed Captioning......................................................................................8
Controls/TV ...............................................................................................6
Controls/Remote ........................................................................................6
Features......................................................................................................3
Glossary TV Terms..................................................................................20
Input Control............................................................................................18
Inputs/Audio and Video...........................................................................18
Language Option........................................................................................7
Memory/Program Channels.......................................................................7
Menu Button ..............................................................................................6
*
Information contained in Quick-Use (Q/U) Guide-page listed.
21 - IB7771 E001
Philips Consumer Electronics Company
Factory Service Center Locations
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge
Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la
garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la
garantía, llame al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA
IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
Atlanta–Athens–Macon–Chattanooga,
TN–North Georgia Area
200 North Cobb Parkway
Building 100, Suite 120
Marietta, GA 30062
Knoxville–Greeneville–
Tri Cities–East Tennessee Area
6700 D. Papermill Road
Papermill Plaza
Knoxville, TN 37919
(423) 584-6614
Philadelphia/S. New Jersey Area
352 Dunks Ferry Road
Bensalem, PA 19020
(215) 638-7500
Pittsburgh, PA–Steubenville, OH–
Wheeling/Morgantown, WV Area
2891 Banksville Road
Pittsburgh, PA 15216
(412) 563-8020
(770) 795-0085
Charlotte–Winston Salem–
Greensboro
520-G Clanton Road
Charlotte, NC 28217
(704) 529-6330
Ft. Myers–Naples–
Southwest Florida Area
11601 Cleveland Ave., Suite 15
Ft. Myers, FL 33907
(941) 278-4242
San Francisco–Oakland–San Jose Area
681 East Brokaw Rd.
San Jose, CA 95131
Chicago–Gary Area
1360 W. Hamilton Parkway
Itasca, IL 60143
Houston–Galveston–Beaumont–Austin–
San Antonio Area
1110 North Post Oak Road
Suite 100
Houston, TX 77055
(713) 682-3990
(408) 436-8566
Seattle–Tacoma/Olympia Area
1055 Andover Park East
Tukwila, WA 98188
(630) 775-0990
Cleveland–Akron–Youngstown Area
950 Keynote Circle
Brooklyn Heights, OH 44131
(216) 741-3334
(206) 575-6288
Miami–Southeast Florida Area
2099 W. Atlantic Blvd.
Pompano Beach, FL 33069
(954) 978-0467
Tampa–St.Petersburg–Sarasota Area
Center Point Business Park, Building B-1,
Suite 100
1911 U.S. Hwy. 301 North
Tampa, FL 33619
Detroit/Toledo Area
25173 Dequindre
Madison Heights, MI 48071
(810) 544-2110
(813) 621-8181
LIMITED W ARRANTY
CO LO R TELEVISIO N
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product must be carried in for service.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or autho-
rized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
• a product used for commercial or institutional purposes.
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Service Com pany, P.O . Box 555, Jefferson City, Tennessee 37760,
(423) 475-8869
24 - IB7771 E001
|