MCD177
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
1
Remove the plastic
protective sheet
Remote control with
battery
AV cables (Y/W/R)
Quick Start Guide
User 2Manual
Power adaptor
FM antenna
User Manual
Setting the clock
1
2
In standby mode, press and hold DISPLAY/CLOCK.The clock digits flash on
the display panel.
Press TUNING à / á (or à / á on the remote control) to set the
hours.
3
4
Press í/ ë to set the minutes.
Press PROG to select between 12 hour and 24 hour display.
Press DISPLAY/CLOCK agian to store the setting.
5
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connectedTV does not support
progressive signals or the video cables are not connected accordingly, see the user manual
for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off yourTV progressive scan mode then turn on to interlaced mode.
2) Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off progressive
scan, then press SYSTEM MENU on the remote to exit the system menu.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
– – Preference Page – –
Audio
Subtile
Disc Menu
Parental
Password
Divx Subtitle
Default
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
Playing a disc
1
Press OPEN•CLOSE 0 to open the disc door and load in a disc, then press
the same button again to close the disc door.
➜ Make sure the label side of the disc is facing up.
2
3
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
Programming and tuning to radio stations
1
2
3
Press SOURCE (FM on the remote control) to select tuner source.
Press PROG for more than two seconds to program all available stations in order of
waveband.
Press í/ ë until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket
on the front panel of the main set.
Press SOURCE (or USB on the remote control) once or more to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
CRoyal Philips Electronics N.V. 2008
All rights reserved.
PDCC-ZYL-0809
|