OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODEL
M4210L
Table of Contents
Connecting the stand.................................................................4
Connecting the Speakers ..........................................................5
Portrait Mode ..............................................................................6
Using the Remote Control .........................................................7
Remote Control Buttons....................................................................................................7
Inserting Batteries into the Remote Control...................................................................8
Part Names and Functions ........................................................9
Connecting to External Devices................................................10
When Connecting to Your PC ...........................................................................................10
VESA FDMI Wall Mounting.................................................................................................12
Video Input ...........................................................................................................................13
HDMI Input (480p/576p/720p/1080i/1080p) ......................................................................14
Watching AV Outputs..........................................................................................................15
User Menus.................................................................................16
Screen Adjustment Options..............................................................................................16
OSD Menu ............................................................................................................................18
How to Adjust the OSD (On-Screen Display)..................................................................19
Adjusting the Screen Automatically.................................................................................19
Adjusting Screen Color......................................................................................................20
Adjusting Audio...................................................................................................................25
Adjusting the Timer.............................................................................................................26
Selecting Options ...............................................................................................................28
Adjust Set ID and Check Serial No. and SW Version.....................................................32
Troubleshooting .........................................................................33
Specifications ...........................................................................36
Connecting the stand
- Only on some models.
1. Take the parts for the stand out of the box and assemble them as shown in the
picture below.
First, check that the following parts have been included.
Parts
Screws (6)
Stand (1)
Cable management (1)
2. Place a soft cloth on the table and place the screen downward. Connect the stand
as shown in the following picture.
3. Use the screws to secure the stand on the rear side of the product as shown in the
diagram.
4
Connecting the Speakers
- Only on some models.
Mount the speakers onto the sets using screws as shown below.
After installing your speakers, use cable holders and ties to organize the cables.
Cable holder
Remove the paper.
* This feature is not available on all models.
When the speaker is installed.
Cable Ties
*Connect the input terminal with the proper color.
* This feature is not available on all models.
5
Portrait Mode
- Only on some models.
"When installing in portrait mode, rotate the sets clockwise when looking
at the unit from the front."
6
Using the Remote Control
Remote Control Buttons
•
•
Power On/Off Button
Input Select Button
(See next page)
•
AV Button
•
ARC button
•
Sleep Button
When watching AV, RGB PC,HDMI/DVI.
The product will be automatically turned
off after a certain period of time.
Press this button repetitively to
select an appropriate time duration
Aspect Ratio Correction. Toggles
through aspect ratio options.
•
Auto Button
Automatic adjustment function
(Operational for the analog signal only)
•
PSM Button
- Toggles through preset video
settings.
No supported function.
No supported function
No supported function
•
Exit Button
Volume
•
Menu Button
•
•
Button
•
UP and Down buttons
Bring up and down direction
adjustment.
Volume up and down
Check Button
•
Mute button
No supported function
7
Using the Remote Control
•
AV Button
•
Input Select Button
If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
Toggles through video
AV
RGB PC
HDMI/DVI
using the
button.
Input
AV
RGB PC
HDMI/DVI
▲▼
Inserting Batteries into the Remote Control
1. Open the battery compartment cover on the back side and
install the batteries matching correct polarity (+ with +,- with -).
2. Install two 1.5 V AAA batteries. Don’t mix old or used batteries
with new ones.
3. Close cover.
AAA Type
4. To remove the batteries, perform the installation actions in
reverse.
8
Part Names and Functions
* Image shown may differ from your set.
Rear View
Power Connector : Connect the power cord
RGB PC, HDMI/DVI Ports
- HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection).
Some devices require HDCP in order to display HD signals.
RS-232C Serial Ports
PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports
Speaker Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the
connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out
using the card jumper of the program (see your sound card manual).
9
Connecting to External Devices
When Connecting to Your PC
Make sure the computer, product and the peripherals are turned off.
Then, connect the signal input cable.
A
B
When connecting with the D-Sub signal input cable.
When connecting with the HDMI to DVI signal input cable (not included).
A
PC
Rear side of the product.
PC/MAC
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible adapter is
available on the market(different signaling system).
B
(not included)
Rear side of the product.
PC
* Use shielded signal interface cables (D-Sub 15-pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.
Connect the audio cable.
Rear side of the product.
PC
Connect the power cord.
Rear side of the product.
10
Connecting to External Devices
1
Turn on power by pressing the power button on the product.
Power button
2
Turn on the PC.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the SOURCE button on the back of the product.
SOURCE
SET
▼▲
AUTO/SET
▼▲
Input
Input
When connecting with a D-Sub signal input cable.
A
B
• Select RGB PC : 15-pin D-Sub analog signal.
AV
AV
RGB PC
HDMI/DVI
RGB PC
HDMI/DVI
When connecting with a HDMI to DVI signal input cable.
• Select HDMI/DVI : HDMI to DVI digital signal.
▲▼
▲▼
How to connect to two computers.
Note
• Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
• Press INPUT on the remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a grounded wire.
11
Connecting to External Devices
VESA FDMI Wall Mounting
This product supports a VESA FDMI compliant mounting interface. These mounts are purchased
separately and not available from LG. Refer to the instructions included with wall mount for more
info.
Kensington Security Slot
The Set is equipped with a Kensington Security System
connector on the back panel. The cable and lock are
available separately and are not sold by LG. For more
WARNING
•
To prevent injury, this apparatus must be securely attached to the wall according to the installation
instructions.
Optional Installer Remote Control for model No. Series M4210L
There is an optional installer remote control available for the M4210L series. The installer remote
control is NOT included with the apparatus.
Option Extras
Wall Mounting Bracket
(AP-WX60)
12
Connecting to External Devices
Video Input
Connect the video cable as shown below and then connect the power cord (see page 10).
Connecting with a BNC cable.
A
•
Connect the input terminal with the proper color.
Product
Audio Cable
(not included)
BNC Cable
(not included)
VCR/DVD Receiver
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the SOURCE button on the back of the product.
SOURCE
SET
▼▲
Input
AV
RGB PC
HDMI/DVI
AUTO/SET
▼▲
When connecting with an BNC cable.
A
•
Select AV.
▲▼
Note
• When the BNC cable is connected simultaneously with an S-Video cable, the S-Video input has
priority.
13
Connecting to External Devices
HDMI Input (480p/576p/720p/1080i/1080p)
- HDMI supports high definition input and HDCP (High-bandwidth Digital Content Protection).
Some devices require HDCP in order to display HD signals.
Connect the video/audio cable as shown below and then connect the power cord
(see page 10).
Product
Product
RCA-PC
Audio Cable
(not included)
HDMI to DVI
Signal Cable
(not included)
HDMI Signal Cable
(not included)
VCR/DVD/Set-top Box
VCR/DVD/Set-topBox
Note : Dolby Digital is not supported.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT SET
▼▲
Or, press the SOURCE button on the back of the product.
SOURCE
AUTO/SET
▼▲
Input
When connecting with an HDMI to DVI signal input cable.
When connecting with an HDMI signal input cable.
• Select HDMI/DVI
AV
RGB PC
HDMI/DVI
▲▼
14
Connecting to External Devices
Watching AV Outputs
- When using the AV input, you can connect the AV Out to other monitors.
Product
BNC Cable
(not included)
Audio Cable
(not included)
Video/TV
Note
• When multi-connecting in/out cascade format, no loss cables are recommended.
We recommend using a cable distributor.
15
User Menus
Screen Adjustment Options
• Press this button to turn on the power. Press this button again to
turn it off.
Power Button
• This Indicator lights up blue when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
Power Indicator
• Use this button to show/hide the OSD (On Screen Display).
MENU Button
• Use this button to select an icon or adjust the setting in the OSD.
• Adjust the up and down.
OSD Select /
Adjust Button
Volume
35
• Adjust the volume.
16
User Menus
Screen Adjustment Options
[For PC Analog signal]
AUTO/SET Button
Auto in progress
For optimal display change
resolution to 1920 x 1080
[When 1920 x 1080 is selected]
Auto in progress
SOURCE
- Toggles between inputs
AUTO/SET
▼▲
SOURCE Button
Input
AV
AV
Composite video, Separate video
RGB PC
HDMI/DVI
RGB PC
HDMI/DVI
15-pin D-Sub analog signal
Digital signal
▲▼
• This is where the unit receives signals from the remote control.
IR Receiver
17
User Menus
OSD Menu
Icon
Function Description
Adjusts screen brightness, contrast and color.
Adjusts audio.
Picture
Audio
Adjusts the timer options.
Time
Adjusts the screen status.
Option
Adjust ID and checks Serial No. and SW version.
Information
Note
OSD(On Screen Disp lay)
The OSD function enables you to conveniently adjust the screen status with a graphic
interface.
18
User Menus
How to Adjust the OSD (On-Screen Display)
Save
adjustment
Pops up
the menu
screen
Move where
you want to
adjust
Move where
you want to
adjust
Exit from the
menu screen.
Select a
menu icon
Select a
menu icon
Adjust the status
•
Use the remote control to adjust the OSD.
Press the MENU button and the main menu of the OSD appears.
1
2
3
4
5
6
To navigate, use the
Buttons.
When you've highlighted the desired icon, press SET.
Use the
buttons to adjust the item.
Accept the changes by pressing SET.
Exit the OSD by pressing EXIT.
Adjusting the Screen Automatically
Press AUTO/SET (AUTO on the remote Control) when viewing a PC
analog signal. The optimal screen settings will be selected that suit the
current mode. If adjustments are not satisfactory, adjust the screen
manually.
[When 1920 x 1080 is selected]
Auto in progress
19
User Menus
Adjusting Screen Color
Picture
Picture
Mode
Picture Mode
Color Temperature
Advanced
Vivid
Standard
Cinema
Sport
Game
User1
User2
Aspect Ratio
Picture Reset
Screen
MENU
Toggles between screen presets.
• Vivid : Displays a sharp image.
• Standard : This is the optimum viewing condition for general users.
• Cinema : This mode optimizes video for watching movies.
• Sport : This mode emphasizes dynamic video and primary colors (e.g. white, uniforms, grass,
sky blue, etc.) by realizing the optimal image settings for sports.
• Game : This is the mode for fast response speeds for video games.
• User1,2 : Select this option to use the user-defined settings.
User2
Backlight
Contrast
Brightness
Color
20
90
50
50
50
50
Sharpness
Tint
Expert
MENU
Backlight : Adjusts the brightness of LCD panel.
Contrast : Adjusts the difference between light and dark levels.
Brightness : Adjusts the brightness of the screen.
Color : Adjusts the color (works in DTV mode).
Sharpness : Adjusts the clearness of the screen (function works in DTV mode).
Tint :Adjusts the tint (function works in DTV mode).
Expert : Compensates for each image mode, or adjusts image values according to a
particular image (applied only to User2 menu). (Function works in AV and HDMI-
DTV modes.)
Note
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or
Game, the subsequent menus will be automatically set.
20
User Menus
Adjusting Screen Color
Color
Temperature
Picture
Picture Mode
Color Temperature
Advanced
Cool
Medium
Warm
User
Aspect Ratio
Picture Reset
Screen
MENU
Color Settings
• Cool : Slightly purple temperature.
• Medium : Slightly blue temperature.
• Warm : Slightly red temperature.
• User : Selects user-defined settings.
User
Red
0
0
0
Green
Blue
MENU
Red / Green / Blue
Set your own color levels.
21
User Menus
Adjusting Screen Color
Picture
Advanced
Picture Mode
Color Temperature
Advanced
To set
Aspect Ratio
Picture Reset
Screen
MENU
• Gamma : Set your own gamma value. : -50/0/50
On the monitor, high gamma values display whitish images and low gamma
values display high contrast images.
• Film Mode : (Function works in AV mode.)
When watching a movie, this function adjusts screen settings to the best
picture appearance.
• Black Level : (Function works in AV(NTSC), HDMI/DVI modes.) Adjusts the contrast and
the brightness of the screen using the black level.
• High : The reflection of the screen gets brighter.
• Low : The reflection of the screen gets darker.
• NR : Removes noise up to the point where it does not damage the original picture.
22
User Menus
Adjusting Screen Color
Aspect Ratio
Selects the image size of the screen.
Picture
Picture Mode
16:9
Original
4:3
14:9
Zoom1
Zoom2
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
MENU
<AV>
16:9
Widescreen mode.
Just Scan
Original
Displays the full signal data without cropping any of the image.
The aspect ratio is not adjusted from the original. It is set by the program being
watched.
4:3
1:1
Selects a 4:3 aspect ratio image.
The aspect ratio is not adjusted from the original. Used in PC mode.
(Only HDMI/ DVI PC, RGB PC.)
14:9
14:9 programs are viewed normally in 14:9 with black bars added to the top and
bottom. 4:3 programs are magnified on the top/bottom and left/right sides.
Zoom1, 2
4:3 programs are magnified until they fill the 16:9 screen. The top and bottom
will be cut cropped.
23
User Menus
Adjusting Screen Color
Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default
settings.
Picture Reset
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
To set
Picture Reset
Screen
MENU
Adjust the screen video.
Picture
Screen
Picture Mode
Color Temperature
Advanced
Screen
Auto Config.
Manual Config.
XGA Mode
Reset
To set
Aspect Ratio
Picture Reset
Screen
To set
MENU
MENU
• Auto Config. (RGB PC input only) : Adjusts the screen position, clock and phase. Available for
analog signals only.
• Manual Config. : If the picture isn't clear after auto adjustment and characters are still trembling,
adjust the picture phase manually.
* Phase and Clock function are not available in HDMI/DVI DTV.
Phase : Removes any horizontal noise and clear or sharpen characters. Available for analog
signals only.
Clock : Minimizes any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. Available for analog signals only.
H-Position : Moves the screen position horizontally.
V-Position : Moves the screen position vertically.
H-Size : Adjust the horizontal size of the screen.
V-Size : Adjust the vertical size of the screen.
• XGA Mode (RGB-PC only). : For better picture quality, select the same mode corresponding to
your computer resolution.
• Reset: Return Manual config. and XGA Mode to the default settings.
24
User Menus
Adjusting Audio
Sound
Mode
The best sound quality will be selected automatically depending on the video type that you're
currently watching.
Audio
Sound Mode
Auto Volume
Balance
Clear Voice
Standard
Music
Cinema
Sport
Speaker
Game
User
MENU
• Clear Voice : By differentiating the human sound range from others, Clear Voice II improves
voice quality.
• Standard : Offers standard-quality sound.
• Music : Optimizes sound for listening to music.
• Cinema : Optimizes sound for watching movies.
• Sport : Optimizes sound for watching sports events.
• Game : Optimizes sound for playing video games.
• User : Selects user-defined audio settings.
User
0.1 0.5 1.5 5.0 10 KHz
MENU
Auto Volume
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Balance
Speaker
Balance sound from the left and right speakers.
Adjust internal speaker status.
If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
Note
When connected to your computer and the 'Sound Mode' setting in the audio menu is Clear
Voice, Standard, Music, Cinema or Sport, the available menus are Balance, Auto Volume and
Speaker.
25
User Menus
Adjusting the Timer
Time
Sleep Time
Off
Auto Sleep
Power On Delay
Power Saving
MENU
Sleep
Time
The power is automatically turned off when the time set by a user has passed.
1) Press MENU and then use
to select the Sleep Time menu.
to set the hour (00 to 23).
2) Press
3) Press
and then use
and then use
to set the minutes (00 to 59).
Auto
If Auto Sleep is active and there is no input signal, the set switches to off automatically after 10
Sleep
minutes.
1) Press MENU and then use
2) Press and then use
to select the Auto Sleep menu.
to select On or Off.
Power
When connecting multiple monitors and turning the power on, the monitors are turned on
individually to prevent overload.
On Delay
Note
•
•
•
•
In the event of power interruption (disconnection or power failure), the clock must be reset.
Once the on or off time is set, these functions operate daily at the preset time.
Off time function overrides On time function if they are set to the same time.
When On time is operated, input screen is turned on as it was turned off.
26
User Menus
Adjusting the Timer
Time
Sleep Time
Auto Sleep
Power On Delay
Power Saving
To set
MENU
Power Saving
Level
Off
Level 1
Level 2
Level 3
MENU
Adjusting the screen brightness helps you save energy.
Power
Saving
• Level: Total 4 screen brightness levels are provided.
- Off: 100% light
- Level 1: 80% light
- Level 2: 60% light
- Level 3: 40% light
27
User Menus
Selecting Options
Option
Language
Key Lock
To set
ISM Method
Power Indicator
DPM Select
Tile Mode
Factory Reset
MENU
Language
Key Lock
To choose the language in which the control names are displayed.
Use
to select On or Off. The monitor can be set so that it can only be used with the
remote control. This feature can prevent unauthorized viewing.
To lock OSD screen adjustment, set the Key Lock tab to the 'On' position.
To unlock OSD screen adjustment, do the following :
• Push the MENU button on the remote control and set Key Lock to the 'Off' position.
ISM Method
A frozen or still picture from a PC/video game displayed on the screen for prolonged periods of
time could result in a ghost image. Avoid allowing a fixed image to remain on the screen for a
long period of time.
• Normal : Leave on normal if you don't foresee burn in being a problem.
• White wash : White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
• Orbiter : May help prevent ghost images. However, it is best not to allow any fixed image to
remain on the screen. To avoid a permanent image on the screen, the screen will
move every 2 minutes.
• Inversion : This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
• Dot Wash : This function moves the black dots of the screen every 5 seconds.
Power
Use this function to set the power indicator on the front side of the product to On or Off.
Indicator
DPM Select
Turn the power saving mode on / off.
28
User Menus
Selecting Options
• To use this function you need to use multiple sets and be connected by an RGB cable by
a distributor and RS-232C.
Option
Tile mode
It is used to enlarge the screen and
also used with several products to
view screen.
Language
Key Lock
ISM Method
Power Indicator
DPM Select
Tile Mode
Tile Mode
H-Size
V-Size
H-Position
V-Position
Reset
Off
0
0
< >
< >
To Set
1
Tile ID
Natural
Factory Reset
Off
MENU
• Tile Mode
Select tile mode and choose tile alignment and set the ID of the current sets to a set location.
* Press SET to save adjustments.
-
Tile mode : column x row ( c = 1, 2, 3, 4,5 r = 1, 2, 3, 4,5)
- 5 x 5 available.
- Configuration of an integration screen is also available as well as
configuration of one by one Display.
-
Tile mode (product 1 ~ 4) : c(2) x r(2)
column
ID 2
ID 1
row
ID 4
ID 3
29
User Menus
Selecting Options
-
Tile mode (product 1 ~ 9) : c(3) x r(3)
column
ID
1
ID
2
ID
ID
3
6
ID
4
ID
5
row
ID
7
ID
8
ID
9
-
Tile mode (product 1 ~ 2) : c(2) x r(1)
column
ID
1
2
ID
row
-
Tile mode (product 1 ~16) : c(4) x r(4)
column
ID 4
ID 8
ID 2
ID 6
ID 3
ID 7
ID 1
ID 5
row
ID10
ID 11
ID 15
ID 9
ID 12
ID 16
ID 13
ID 14
30
User Menus
Selecting Options
Option
Tile mode
Language
Key Lock
Tile Mode
H-Size
Off
0
ISM Method
Power Indicator
DPM Select
Tile Mode
V-Size
0
H-Position
V-Position
Reset
Tile ID
Natural
< >
< >
To Set
1
Factory Reset
Off
MENU
• H-Size
Adjusts the horizontal size of the screen taking into account the size of the bezel.
Adjusts the vertical size of the screen taking into account the size of the bezel.
Moves the screen position horizontally.
• V-Size
• H-Position
• V-Position
• Reset
Moves the screen position vertically.
Initializes and releases Tile Mode.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
• Tile ID
Selects the location of the Tile by setting an ID.
• Natural
The image is omitted by the distance between the screens to be naturally shown.
Factory Reset Select this option to return to the default factory settings.
31
User Menus
Adjust Set ID and Check Serial No. and SW Version.
Information
Set ID
Serial No.
SW Version
MENU
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several
products are connected. Specify the number (01 H to 63 H) using
and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Serial No.
This menu shows the serial number of the product.
SW Version
This menu shows the software version.
32
Troubleshooting
No Image is Displayed
● Is the product power cord connected?
• See if the power cord is properly connected to the outlet.
● Is the power indicator light on?
• See if the power switch is turned on.
• May need service.
● Power is on, power indicator is blue but the
screen appears extremely dark.
• Adjust brightness and contrast again.
• Backlight may need repair.
● The power indicator amber?
• If the product is in power saving mode, move the mouse
or press any key.
• Turn both devices off and then back on.
● Does the 'Out of range' message appear?
• The signal from the PC (video card) is out of the vertical
or horizontal frequency range of the product. Adjust the
frequency range by referring to the specifications in this
manual.
* Maximum resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz
● Does the 'Check signal cable' message
appear?
• The signal cable between PC and product is not
connected. Check the signal cable.
• Press the 'INPUT' menu in the remote Control to check
the input signal.
'Unknown Product' Message Appears When the Product is Connected.
● Did you install the driver?
• Install the product driver provided with the product, or
• See if the plug & play function is supported by
referring to your video card user manual.
'Key Lock On' Message Appears.
• The control locking function prevents unintentional OSD
setting change due to careless usage. To unlock the
● The 'Key Lock On' message appears when
pressing the Menu button.
controls, simultaneously press Menu and
for several
seconds. (You cannot set this function using the remote
control buttons. You can only set this function with the
controls on the product.)
Note
* Vertical frequency: To enable normal viewing, the screen image should be changed tens of
times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number
of times an image is display per second. The unit is Hz.
* Horizontal frequency: The horizontal interval is the time it takes to display one vertical line.
When 1 is divided by the horizontal interval, the number of horizontal lines displayed every
second can be tabulated as the horizontal frequency. The unit is kHz.
33
Troubleshooting
The Screen Image Looks Abnormal.
● Is the screen position wrong?
• D-Sub analog signal - Press "AUTO" on the remote
control to automatically select the optimal screen status
that fits the current mode. If adjustment is not
satisfactory, use the OSD Position menu.
• See if the video card resolution and frequency are
supported by the product. If the frequency is out of
range, set to the recommended resolution in the Control
Panel "Display" Setting menu.
● Do thin lines appear in the background?
• D-Sub analog signal - Press the "AUTO" button on the
remote control to automatically select an optimal screen
status that fits into the current mode. If adjustment is not
satisfactory, use the Clock OSD menu.
● Horizontal noise appears or characters look • D-Sub analog signal - Press the "AUTO" on the remote
blurred.
control to automatically select an optimal screen status
that fits into the current mode. If adjustment is not
satisfactory, use the OSD Phase menu.
● The screen is displayed abnormally.
• The proper input signal is not connected to the signal
port. Connect the signal cable that matches with the
source input signal.
Ghost Image Appears on the Screen.
• If you display a fixed image for a long time, the pixels
may be damaged quickly. Use the screen-saver
function.
● After-image appears when the product is
turned off.
34
Troubleshooting
The Audio Does Not Work.
● No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
● Sound is too dull.
• Select the appropriate equalizer setting.
• Adjust the volume.
● Sound is too low.
Screen Color is Abnormal.
● Screen has poor color resolution
• Set the number of colors to more than 24 bits (true color)
Select Control Panel - Display - Settings - Color
Table menu in Windows.
(16 colors).
● Screen color is unstable or mono-colored.
• Check the connection status of the signal cable. Or,
re-insert the PC video card.
● Do black spots appear on the screen?
• Several pixels (red, green, white or black color) may
appear on the screen, which can be attributable to the
unique characteristics of the LCD panel. The is not a
malfunction of the LCD.
Abnormal Operation
• Is the sleep timer set?
● The power suddenly turned off.
• Check the power control settings.
Power interrupted.
• "CAUTION! FAN STOP!"
If the power is turns off after this message appears, it
means that the fan has malfunctioned. Contact your
local service center.
35
Specifications
Product specifications can change without prior notice for product improvement.
106.73 cm (42.02 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
LCD Panel
Power
0.4845 mm (H) x 0.4845 (V) mm (Pixel Pitch)
Rated Voltage
AC 100-240 V~ 50 / 60 Hz 2.2 A
Power Consumption
On Mode
Sleep Mode
Off Mode
: 220 W Typ.
: ≤ 1 W (RGB) / 2 W (HDMI/DVI)
: ≤ 0.5 W
Dimensions &
Weight
[2]
[1]
H
H
W
D
D
W
[4]
[3]
H
H
Width x Height x Depth
[1] 99.56 cm (39.19 inch) x 67.41 cm (26.54 inch) x 29.30 cm (11.54 inch)
[2] 99.56 cm (39.19 inch) x 58.76 cm (23.13 inch) x 11.37 cm (4.47 inch)
[3] 99.56 cm (39.19 inch) x 67.41 cm (26.54 inch) x 29.30 cm (11.54 inch)
[4] 99.56 cm (39.19 inch) x 58.76 cm (23.13 inch) x 11.37 cm (4.47 inch)
Net
[1] 19.6 kg (43.2 lb)
[2] 16.2 kg (35.7 lb)
[3] 22.2 kg (48.9 lb)
[4] 18.8 kg (41.4 lb)
NOTE
Information in this document is subject to change without notice.
36
Specifications
Product specifications can change without prior notice for product improvement.
Video Signal
RGB : 1920 x 1080 @ 60 Hz
Max. Resolution
HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported
depending on the OS or
video card type.
Recommended
Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI : 1920 x 1080 @ 60 Hz - It may not be supported
depending on the OS or
video card type.
Horizontal Frequency
Vertical Frequency
RGB : 30 kHz to 83 kHz
HDMI/DVI : 30 kHz to 83 kHz
RGB : 56 Hz to 75 Hz
HDMI/DVI : 56 Hz to 60 Hz
Synchronization Type Composite/Separate/Digital
15-pin D-Sub type, HDMI (digital), Composite Video,
Input Connector
RS-232C
Temperature: 5 °C to 35 °C , Humidity: 10 % to 80 %
Temperature: -20 °C to 60 °C , Humidity: 5 % to 95 %
Operational Condition
Storage Condition
Environmental
Conditions
* Applicable only for models that support the speakers
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Audio
Speaker Impedance
8 Ω
NOTE
Information in this document is subject to change without notice.
37
Specifications
PC Mode - Preset Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Preset mode
Preset mode
1280 x 768
1
2
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1280 x 720
31.469
31.468
31.469
37.5
70.8
70.8
59.94
75
*11
*12
*13
*14
15
47.7
60
1360 x 768
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
47.72
47.7
59.799
60
*3
4
63.981
79.98
65.290
67.5
60.02
75.02
59.954
60
*5
6
37.879
46.875
49.725
48.363
60.123
44.772
60.317
75
*16
*17
7
74.55
60
*8
9
75.029
59.855
*10
1~17: RGB Mode
* : HDMI/DVI mode
DTV Mode
Power Indicator
HDMI/DVI
(DTV)
Mode
Product
On Mode
Sleep Mode
Off Mode
Blue
Amber
-
480i
x
x
o
o
o
o
o
576i
480p
576p
720p
1080i
1080p
NOTE
DTV/PC selection on RGB and HDMI/DVI inputs is available for the following PC resolutions :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x 1080 / 60 Hz and DTV resolutions : 480p, 720p, 1080p.
38
Controlling the Multiple Product
RS-232C
Use this method to connect several products to a single PC.
You can control several products at a time by connecting them to a single PC.
RS-232C Configurations
3-Wire Configurations (Not Standard)
7-Wire Configurations (Standard RS-232C cable)
PC
Monitor
PC
Monitor
RXD
TXD
GND
DTR
DSR
RTS
CTS
3
2
5
6
4
7
8
TXD
RXD
GND
DTR
DSR
RTS
CTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
3
2
5
6
4
8
7
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
Data Length : 8 bit
Parity Bit : None
Stop Bit : 1bit
Flow Control : None
Communication Code : ASCII code
Use a crossed (reverse) cable
A1
Controlling the Multiple Product
RS-232C
Command Reference List
COMMAND1 COMMAND2
DATA1
DATA2
DATA3
01. Power
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
a
b
c
d
e
f
g
h
i
j
k
l
m
t
u
z
p
u
c
d
e
f
00H to 01H
02H to 09H
01H to 09H
00H to 01H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 01H
00H to 01H
00H to 64H
00H to 03H
FFH
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Lock/key Lock
14. Balance
15. Color Temperature
16. Abnormal state
17. ISM mode
18. Auto configuration
19. Key
20. Tile Mode
21. Tile H Position
22. Tile V Position
23. Tile H Size
24. Tile V Size
25. Tile ID Set
26. Natural Mode (In Tile mode)
27. Picture mode(PSM)
28. Sound mode
29. Fan Fault check
30. Elapsed time return
31. Temperature value
32. Lamp fault check
33. Auto Volume
34. Speaker
35. Sleep Time
36. Auto Sleep
37. Power On Delay
38. Language
39. DPM Select
40. Reset
00H to 10H
01H
Key Code
j
m
d
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
00H to 55H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 19H
00H to 01H
00H to 06H
00H to 06H
FFH
g
h
i
j
x
y
w
l
n
p
u
v
f
g
h
i
j
k
FFH
FFH
FFH
00H to 01H
00H to 01H
00H to 08H
00H to 01H
00H to 64H
00H to 09H
00H to 01H
00H to 02H
f
f
f
f
f
A2
Controlling the Multiple Product
RS-232C
COMMAND1 COMMAND2
DATA1
DATA2
DATA3
41. Power Saving
42. Power Indicator
43. H Position
44. V Position
45. H Size
f
f
f
f
f
f
f
f
x
l
00H to 03H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
FFH
o
q
r
s
t
y
z
b
46. V Size
47. Serial no.
48. S/W Version
49. Input Select
FFH
20H to A0H
A3
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01Hto63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same
time, it should not be checked the ack message.
Because all sets will send the ack message, so it's impossible the check
the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code ‘0 x 0 D’
* [ ]: ASCII code Space (0 x 20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when
receiving normal data. At this time, if the data is data read mode, it indicates
present status data.
If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
A4
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
01. Power(Command : a)
To control Power On / Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On / Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0 : Power Off
1 : Power On
02. Input Select (Command : b) (Main Picture Input)
To select input source for the Set.
You can also select an input source using the INPUT
button on the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 2 : AV
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 2 : AV
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
A5
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
03. Aspect Ratio(Command : c) (Main picture format)
To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4 : 3)
2 : Wide Screen (16 : 9)
4 : Zoom1 (AV)
5 : Zoom2 (AV)
6 : Original (AV)
7 :14 : 9 (AV)
9 : Just Scan(HD DTV), 1 : 1 (RGB PC, HDMI / DVI PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute(Command : d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1: Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
A6
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
05. Volume Mute(Command : e)
To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off)
1: Volume Mute Off (Volume On)
06. Volume Control(Command : f)
To adjust Volume .
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ page A 8.
A7
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
07. Contrast(Command : g)
To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step 0
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
08. Brightness(Command : h)
To adjust screen brightness.
You can also adjust the brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping
0 : Step
:
A : Step 10
:
F : Step 15
10 : Step 16
:
64 : Step 100
A8
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
09. Color(Command : i) (Video Timing only)
To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
10. Tint(Command : j) (Video Timing only)
To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red : 00H to Green: 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red : 00H to Green : 64H
* Tint Real data mapping
0 : Step 0 to Red
:
64 : Step 100 to Green
A9
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
11. Sharpness(Command : k) (Video Timing only)
To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
12. OSD Select(Command : l)
To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off
1 : OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD Off
1 : OSD On
13. Remote Lock /Key Lock (Command : m)
To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Off
1 : On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Off 1 : On
A10
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
14 Balance(Command : t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
* Balance : L50 to R50
15. Color Temperature (Command : u)
To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Medium
1 : Cool
2 : Warm
3 : User
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Medium
1 : Cool
2 : Warm
3 : User
•
Running the Color Temperature command changes the Picture Mode settings to
User1.
A11
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
16. Abnormal state (Command : z)
Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
0 : Normal (Power on and signal exist)
1 : No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
17. ISM mode(Command: j p)
Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H : Inversion
2H : Orbiter
4H : White Wash
8H : Normal
10H : Dot Wash
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
A12
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
18. Auto Configure(Command: j u)
To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key(Command : m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to page A 34.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A13
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
20. Tile Mode(Command : d d)
Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
Data
00 or 11
12
Description
Tile mode is off.
1 x 2 mode(column x row)
1 x 3 mode
13
14
1 x 4 mode
...
...
55
5 x 5 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
A14
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
21. Tile H Position(Command : d e)
To set the Horizontal position.
Transmission
[d][e][][Set ID][][Data][x]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[e][][Set ID][][OK/NG][Data][x]
22. Tile V Position(Command : d f)
To set the Vertical position.
Transmission
[d][f][][Set ID][][Data][x]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
A15
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
23. Tile H Size(Command : d g)
To set the Horizontal size.
Transmission
[d][g][][Set ID][][Data][x]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
24. Tile V Size(Command : d h)
To set the Vertical size.
Transmission
[d][h][][Set ID][][Data][x]
Data
Min : 00H to Max : 64H
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
A16
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
25. Tile ID Set(Command : d i)
To assign the Tile ID for Tiling function .
Transmission
[d][i][][Set ID][][Data][x]
Data
Min : 00H to Max : 19H
(Hexadecimal code)
Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
26 Natural Mode (In Tile mode) (Command : d j)
To assign the Tile Natural mode for Tiling function .
Transmission
[d][j][][Set ID][][Data][x]
Data 0 : Natural Off
1 : Natural On
ff : Read Status
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
27. Picture Mode (Command : d x)
To adjust the picture mode.
Transmission
[d][x][][Set ID][][Data][x]
Data Structure
Data(Hex)
MODE
00
01
02
03
04
05
06
Vivid
Standard
Cinema
Sport
Game
User1
User2
Acknowledgement
[x][][Set ID][][OK/NG][Data][x]
A17
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
28. Sound Mode (Command : d y )
To adjust the Sound mode.
Transmission
[d][y][][Set ID][][Data][x]
Data Structure
Data(Hex)
Mode
00
01
02
03
04
05
06
Clear Voice
Standard
Music
Cinema
sport
Game
User
Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
29. Fan Fault check (Command : d w )
To check the Fan fault of the TV.
Transmission
[d][w][][Set ID][][Data][x]
* The data is always FF(in Hex).
Data ff: Read Status
Acknowledgement
[w][][Set ID][][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data 0: Fan fault
1: Fan OK
2: N/A(Not Avaliable)
A18
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
30. Elapsed time return(Command : d l)
To read the elapsed time.
Transmission
[d][l][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[l][][Set ID][][OK/NG][Data][x]
* The data means used hours.
(Hexadecimal code)
31. Temperature value (Command : d n)
To read the inside temperature value.
Transmission
[d][n][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][][Set ID][][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
32. Lamp fault Check(Command : d p)
To check lamp fault.
Transmission
[d][p][][Set ID][][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
Data 0 : Lamp Fault
1: Lamp OK
A19
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
33. Auto volume (Command : d u)
Automatically adjust the volume level.
Transmission
[d][u][][Set ID][][Data][x]
Data 0 : Off
1 : On
Acknowledgement
[u][][Set ID][][OK/NG][Data][x]
34. Speaker (Command : d v)
Turn the speaker on or off.
Transmission
[d][v][][Set ID][][Data][x]
Data 0 : Off
1 : On
Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
A20
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
35. Sleep Time (Command : f f)
Set Sleep Time.
Transmission
[f][f][][Set ID][][Data][Cr]
Data
0 : Off
1 : 10
2 : 20
3 : 30
4 : 60
5 : 90
6 : 120
7 : 180
8 : 240
(Orderly)
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
36. Auto Sleep (Command : f g)
Set Auto Sleep.
Transmission
[f][g][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
A21
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
37. Power On Delay (Command : f h)
Set the schedule delay when the power is turned on (Unit: second).
Transmission
[f][h][][Set ID][][Data][Cr]
Data : 00H to 64H (Data value)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
38. Language (Command : f i)
Set the OSD language.
Transmission
[f][i][][Set ID][][Data][Cr]
Data
0 : English
1 : French
2 : German
3 : Spanish
4 : Italian
5 : Portuguese
6 : Chinese
7 : Japanese
8 : Korean
9 : Russian
Acknowledgement
[i][][Set ID][][OK/NG][Data][x]
A22
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
39. DPM Select (Command : f j)
Set the DPM (Display Power Management) function.
Transmission
[f][j][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
40. Reset (Command : f k)
Execute the Picture, Screen and Factory Reset functions.
Transmission
[f][k][][Set ID][][Data][Cr]
Data
0 : Picture Reset
1 : Screen Reset
2 : Factory Reset
Acknowledgement
[k][][Set ID][][OK/NG][Data][x]
A23
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
41. Power saving(Command : f I)
To set the Power saving mode.
Transmission
[f][I][][Set ID][][Data][Cr]
Data 0 : Off
1: (static level 1)
2: (static level 2)
3: (static level 3)
Acknowledgement
[I][][Set ID][][OK/NG][Data][x]
42. Power Indicator (Command : f o)
To set the LED for Power Indicator
Transmission
[f][o][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[o][][Set ID][][OK/NG][Data][x]
43. H Position (Command : f q)
To set the Horizontal position
Transmission
[f][q][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[q][][Set ID][][OK/NG][Data][x]
A24
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
44. V Position (Command : f r)
To set the Horizontal position
Transmission
[f][r][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[r][][Set ID][][OK/NG][Data][x]
45. H Size (Command : f s)
To set the Horizontal size.
Transmission
[f][s][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[s][][Set ID][][OK/NG][Data][x]
* H Size Real Data Mapping
[Data1]
0x00: Step 0
0x0A: Step 10
0x14: Step 20
0x1E: Step 30
0x28: Step 40
0x32: Step 50
0x3C: Step 60
0x46: Step 70
0x50: Step 80
0x5A: Step 90
0x64: Step 100
A25
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
46. V Size (Command : f t)
To set the Vertical size
Transmission
[f][t][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
•
Refer to ‘Real data mapping’ page A 8.
Acknowledgement
[t][][Set ID][][OK/NG][Data][x]
* V Size Real Data Mapping
[Data1]
0x00: Step 0
0x0A: Step 10
0x14: Step 20
0x1E: Step 30
0x28: Step 40
0x32: Step 50
0x3C: Step 60
0x46: Step 70
0x50: Step 80
0x5A: Step 90
0x64: Step 100
47. Serial no.Check (Command : f y)
To read the serial numbers
Transmission
[f][y][][Set ID][][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][][Set ID][][OK/NG][Data1] to [Data13] [x]
* The data format is ASCII Code.
A26
Controlling the Multiple Product
RS-232C
Transmission / Receiving Protocol
48. S/W Version (Command : f z)
Check the software version.
Transmission
[f][z][][Set ID][][Data][Cr]
Data FFH : Read
Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
49. Input Select (Command : x b)
To select input source for the Set.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20H : AV
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 20H : AV
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
A27
IR Codes
RS-232C
How to connect
Connect your wired remote control to Remote Control port on the Product.
Remote Control IR Code
Output waveform
single pulse, modulated with 37.917kHz signal at 455kHz
Tc
Carrier frequency
FCAR = 1 / Tc = fosc / 12
Duty ratio = T1 / Tc = 1 / 3
T1
Configuration of frame
•
1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
•
Repeat frame
Repeat code
Tf
Lead code
9 ms
4.5 ms
0.55ms
Repeat code
9 ms
2.25 ms
Bit description
•
Bit "0"
•
Bit "1"
0.56 ms
0.56 ms
1.12 ms
2.24 ms
Frame interval : Tf
The waveform is transmitted as long as a key is depressed.
•
Tf
Tf
Tf = 108 ms @ 455 kHz
A28
IR Codes
RS-232C
Code(Hex) Function
Note
00
01
02
03
08
C4
C5
09
98
0B
0E
43
5B
6E
44
10
11
12
13
14
15
16
17
18
19
5A
D5
C6
79
76
77
AF
99
R/C Button
R/C Button
R/C Button
R/C Button
L
M
VOL(
VOL(
)
)
R/C Button (Power On / Off)
Discrete IR Code (Only Power On)
Discrete IR Code (Only Power Off)
R/C Button
POWER ON/OFF
POWER ON
POWER OFF
MUTE
R/C Button
AV
R/C Button
INPUT
R/C Button
SLEEP
R/C Button
MENU
R/C Button
EXIT
R/C Button
PSM
R/C Button
SET
R/C Button
Number Key 0
Number Key 1
Number Key 2
Number Key 3
Number Key 4
Number Key 5
Number Key 6
Number Key 7
Number Key 8
Number Key 9
AV
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code(Input AV Selection)
Discrete IR Code(Input RGB PC Selection)
Discrete IR Code(Input HDMI/DVI Selection)
R/C Button
RGB PC
HDMI/DVI
ARC
Discrete IR Code(Only 4 : 3 mode)
Discrete IR Code(Only 16 : 9 mode)
Discrete IR Code(Only ZOOM1, ZOOM2 mode)
Discrete IR Code
ARC (4 : 3)
ARC (16 : 9)
ARC (ZOOM)
AUTO CONFIG
A29
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of
the SET. Record it below should you ever
need service.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc.
has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
MODEL
SERIAL
Temporary noise is normal when powering
ON or OFF this device.
|