Philips Institutional Television User Manual

GB  
PHILIPS Institutional TV - Instructions for use  
Language  
Installing the TV  
• Place your TV on a stable and strong base.  
The Language function is shown in the  
• Leave at least a free pace of 5 cm on both  
sides and 10 cm from the top for good  
ventilation of the set.  
• Do not cover the ventilation openings with  
items such as newspapers, cloths etc.  
Menu as "LANGUAGE", and its valid states  
are "ENGLISH", "DEUTSCH", "FRANCAIS",  
"ITALIANO".  
No. of Programs  
This item of the Setup Menu is activated by  
highlighting the item using the cursor  
up/down keys, then pressing the cursor right  
key. Number of TV, Pay TV, Radio and Info  
programs can be set and stored.  
Connecting the mains  
Insert the main plug into the wall socket and  
switch on. Please refer to the specification at  
the back of the TV for the correct operating  
voltage.  
TV Installation  
When this menu is open, all the protections  
are inactive. To exit any menu press Menu  
button.  
Installing the remote control  
• Remove the cover at the back of the remote  
control.  
Input  
• Insert the correct type and size batteries into  
the compartment making sure they are the  
right way around.  
You can secure your batteries by fastening  
an appropriate screw into the hole of the  
battery cover.  
The "Input" menu item selects the desired  
input source that will be assigned to the  
program. Possible values are Front End,  
AV1, and AV2YC (internal interface, for  
system TVs only).  
System  
Tips and Alerts  
• Never try repairing the set by yourself,  
always contact a qualified technician.  
Sets for East regions will have 2 states,  
WEST EU (PAL/SECAM-BG) and EAST  
EU (PAL/SECAM-DK).  
Sets for West regions will have 3 states,  
WEST EU (PAL/SECAM-BG), UK (PAL-I),  
FRANCE (SECAM-L/L').  
Your TV contains material which can be  
recycled and reused by specialized  
companies. Please find out about local  
regulations on the disposal of your old TV  
set.  
• TV consumes energy in the stand-by mode.  
Energy consumption contributes to air and  
water pollution. We advise you to switch off  
your TV overnight instead of leaving it in  
stand-by mode.  
Manual Search  
3 digits can be entered for a frequency in  
MHz or right cursor for auto search;  
during frequency entry the not yet entered  
digits are displayed as dashes "-".  
Program no.  
The programme type can be selected with  
the cursor left/right buttons. These  
buttons will toggle between all available  
types: "TV", "INFO", "PAY-TV"; if the radio  
is external (no radio tuner is present in  
the chassis), "RADIO" is displayed, if the  
radio is internal there will be a separate  
radio installation menu. If the program  
number of a certain type is 0, the  
corresponding type is not displayed.  
Accessing the Set-up Menu  
Accessing the Set-up Menu, while the set is in  
the Security High state, can only be done by a  
T374AH Institutional Setup remote Menu  
command. While the set is in the Security  
Standard State the Setup Menu may be  
accessed with a normal guest cursor remote  
control by a sequence of numbers  
(319753MUTE).  
1
Time Offset  
Min Volume  
This menu item will be used to set the  
offset needed to adjust the time received  
from the teletext channel to represent the  
current time in the current location.  
It sets the limit for the minimum volume  
allowed for the TV set; use right/left cursor to  
adjust.  
Max Volume  
It sets the limit for the maximum volume  
allowed for the TV set; use right/left cursor to  
adjust.  
Brightness  
The brightness control contains 64 discrete  
values from the minimum to maximum  
setting.  
Switch on Volume  
It sets the TV’s volume at switch on; use the  
right/left cursor to adjust.  
Colour  
The color control contains 64 discrete values  
from the minimum to maximum setting.  
Volume Fixed  
The feature is displayed as "VOLUME  
FIXED" in the Setup menu and the valid  
toggle states are "ON" and "OFF".  
Contrast  
The picture control contains 64 discrete  
values from the minimum to maximum  
setting.  
Buzzer Volume  
It sets the volume of the alarm buzzer; use  
right/left cursor to adjust.  
Sharpness  
The sharpness control contains 64 discrete  
values from the minimum to maximum  
setting.  
Switch On Program  
This feature sets the current program that  
the television will be tuned to when brought  
to POWER ON condition.  
Noise Reduction  
Switch this on to reduce picture noise  
Forced mono (for stereo TVs only)  
Power On  
This command is used to activate or to  
deactivate the stereo feature, in stereo sets;  
toggle ON, OFF using the right/left cursor.  
The Power On menu function directs the  
control system to activate the television  
receiver whenever AC Power is applied to  
the television and ignore any command that  
would deactivate the television.  
Balance (for stereo TVs only)  
It balances the sound output from TV’s  
speakers  
The Power On Menu function is shown as  
"POWER ON", and its valid states are  
"FORCED": "STANDARD".  
Treble (for stereo TVs only)  
It sets the treble frequencies of sound output  
from TV’s speakers.  
Program Display  
Program Display values can be: Number,  
Label, All, None.  
Bass (for stereo TVs only)  
It sets the bass frequencies of sound output  
from TV’s speakers.  
Keyboard Lock  
In Commercial Mode, the Keyboard Lockout  
menu function controls whether any Local  
Keyboard commands, except for the Service  
entry command can be generated.  
AVL (Automatic Volume Leveller)  
The Automatic Volume Leveler feature is  
shown as "AVL" in the menu and its valid  
states are "ON": "OFF".  
The Keyboard Lockout menu function is  
shown as "KEYBOARD LOCKOUT" and its  
states are "ON": "OFF".  
Volume Bar  
To display volume bar when adjusting  
volume, select "ON"; to hide the bar, select  
off.  
3
Free protected programs  
Program Guide  
With this item all protected programs can be  
freed. If "free protected programs" is set to  
"ON", all programs are accessible for the  
user, if the item is "OFF" protected programs  
can be selected but with picture and sound  
muted.  
This feature checks for program labels that  
have been assigned to the programs via the  
LABELS function, and if those programs are  
in the program ring, will display in a "list" or  
"page", the program numbers with the  
associated labels.  
ESP  
Reminder  
Energy Saving Programmability Mode (ESP)  
controls the maximum continuous viewing  
time allowed by the control system.  
It is provided to allow the installed  
This menu function is shown as  
"REMINDER", and its states are "ON":  
"OFF".  
When the Reminder function is highlighted,  
the status message displays the current  
state of the control.  
establishment to limit the time the television  
remains activated once a Guest has  
checked-out of their room.  
The ESP Menu function is shown as "ESP",  
and its valid values are 00 - 99 (in hours).  
Security  
The menu function "SECURITY" allows the  
user to select one of two states "HIGH" or  
"STANDARD". The default is "STANDARD".  
While the set is in the Security High state the  
setup menu can only be accessed by a  
T374AH Institutional Setup remote menu  
command.  
System Interface  
This item is only present in "system" sets  
and it is used to enable or disable  
communication with the DCM.  
Audio/Video Mute  
While the set is in the Security Standard  
state the Setup Menu may be accessed with  
a normal guest cursor remote control by a  
sequence of numbers.  
The Audio/Video Mute menu function  
determines whether the video should be  
blanked and the audio should be muted if  
the currently tuned channel has no signal  
(Blue, Black, Off).  
Welcome Message  
Select "Welcome Message" with RC: with  
cursor left/right the following sub menu will  
be displayed: Welcome Message, Line 1,  
Line 2. With the cursor up/down you can set  
the message characters.  
4

IBM 8313 User Manual
LG Electronics LG Life Good Computer Monitor L1953HR User Manual
Medion MD 80137 User Manual
National Products LMX9820ADEV User Manual
Panasonic Cordless Telephone KX TC1401G User Manual
Philips 21HT3312 User Manual
Philips 28PT7108 User Manual
Philips LX3700D User Manual
Philips MCD715 User Manual
Philips PR1306C1 User Manual