Register your product and get support at
HTS5110
EN User manual
PT Manual do utilizador
SV Användarhandbok
TR Kullanım kılavuzu
DA Brugervejledning
DE Benutzerhandbuch
EL Εγχειρίδιο χρήσης
FI Käyttöopas
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
8
Product specifications
Contents
9
Troubleshooting
1
Notice
Copyright
Compliance
Mains fuse (UK only)
Trademarks
10 Index
2
Important
Safety
Product care
Disposal of your old product and batteries
3
4
Your home theater
Main unit
Remote control
Connect your home theater
Connectors
Connect to theTV
Connect audio fromTV or other devices
5
Use your home theater
Before you start
Choose your sound
Synchronize audio with video
Play from a USB storage device
More play features for USB
Play from radio
Play from an MP3 player
Use Philips EasyLink
6
7
Change settings
Access the setup menu
Change general settings
Change audio settings
Change video settings
Change preference settings
Update software
Check software version
Update software from a USB storage
device
EN
1
1 Notice
Note
• To conform with the EMC directive
(2004/108/EC), the mains plug on this product
must not be detached from the mains cord.
Copyright
Trademarks
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks & DTS Digital Surround
and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights
Reserved.
Copyright in the UK
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/
EC (EMC).
Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
Hereby, Philips Consumer Lifestyle, declares
that this Home Theater System HTS5110 is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Mains fuse (UK only)
This product is fitted with an approved moulded
plug. Should it become necessary to replace the
mains fuse, this must be replaced with a fuse of the
same value as indicated on the plug (example 10A).
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, inc.
1
2
Remove fuse cover and fuse.
The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If
the fuse is lost, contact your dealer in order
to verify the correct type.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
3
Refit the fuse cover.
2
EN
•
•
Never place the product or any objects
on power cords or on other electrical
equipment.
2 Important
Read and understand all instructions before you
use your home theater. If damage is caused by
failure to follow instructions, the warranty does
not apply.
If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Risk of overheating!
Safety
•
Never install this product in a confined
space. Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of electric shock or fire!
•
Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
Risk of contamination!
•
Do not mix batteries (old and new or
carbon and alkaline, etc.).
•
Remove batteries if they are exhausted or
if the remote control is not to be used for a
long time.
•
Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
Batteries contain chemical substances, they
should be disposed of properly.
•
•
Never insert objects into the ventilation
slots or other openings on the product.
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Product care
Only use microfiber cloth to clean the product.
•
•
Disconnect the product from the power
outlet before lightning storms.
When you disconnect the power cord,
always pull the plug, never the cable.
Disposal of your old product
and batteries
Risk of short circuit or fire!
•
Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
Risk of injury or damage to the home theater!
•
For wall-mountable products, use only the
supplied wall mount bracket. Secure the
wall mount to a wall that can support the
combined weight of the product and the
wall mount. Koninklijke Philips Electronics
N.V. bears no responsibility for improper
wall mounting that results in accident, injury
or damage.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
•
For speakers with stands, use only the
supplied stands. Secure the stands to the
speakers tightly. Place the assembled stands
on flat, level surfaces that can support the
combined weight of the speaker and stand.
EN
3
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
3 Your home theater
Congratulations on your purchase, and welcome
to Philips!To fully benefit from the support that
Philips offers, register your home theater at
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Main unit
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences
for the environmental and human health.
a
b
(Standby-On)
+/- (Volume)
Increases or decreases volume.
c Display panel
d SOURCE
Selects an audio/video source for the home
theater.
e SOUND MODE
Selects a sound mode.
f SURROUND
Switches to surround sound or stereo
sound.
4
EN
•
•
RADIO: Switches to FM radio.
Remote control
COAX: Switches to coaxial digital
input or HDMI ARC source.
•
•
AUX: Switches to auxiliary input source.
1
2
MP3 LINK: Switches to MP3 Link input
source.
c
d
SETUP
Accesses or exits the setup menu.
(Navigation buttons)
Navigate menus.
23
3
4
5
•
•
In radio mode, press left or right to
search a radio station; press up or
down to fine tune a radio frequency.
22
21
e
(Fast Backward)
Fast backwards or fast forwards. Press
repeatedly to change the search speed.
(Fast Forward)
6
7
f
g
h
INFO
20
19
Displays information about what is playing.
(Play/Pause)
Starts, pauses or resumes playback.
8
9
(Stop)
Stops playback.
18
17
•
•
In radio mode, erases the current
preset radio station.
i TREBLE / BASS
10
Changes treble or bass. Use with +/-.
j Numeric buttons
Selects an item to play.
16
15
14
11
12
13
k AUDIO SYNC
Synchronize audio with video. Use with +/-.
l SOUND MODE
Selects a predefined sound effect.
m ZOOM
Zooms into a picture.
n REPEAT A-B
Marks two points within a track for repeat
play, or turns off repeat mode.
a
(Standby-On)
Switches the home theater on or to
standby.
•
•
o REPEAT / PROGRAM
•
•
Selects a repeat or shuffle mode.
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
In radio mode, programs radio stations.
p SUBTITLE
Note
b Audio Source
USB: Switches to USB storage device.
•
• This button is not applicable for HTS5110.
EN
5
q SURROUND
Selects Dolby Virtual Speaker surround
4 Connect your home
theater
This section helps you connect your home theater
to aTV and other devices.The basic connections
of the home theater with its accessories are
provided in the Quick Start. For a comprehensive
philips.com.
sound.
r
s
t
u
+/-
Increases or decreases volume.
(Mute)
Mutes or restores volume.
/
(Previous/Next)
Skips to the previous or next track or file.
BACK
Returns to a previous menu screen.
Note
v OK
Confirms an entry or selection.
• Refer to the type plate at the back or bottom of
the product for identification and supply ratings.
• Before you make or change any connections,
ensure that all devices are disconnected from
the power outlet.
w AUDIO
Selects an audio language or channel.
Connectors
Front connectors
a
(USB)
Audio or picture input from a USB storage
device.
b MP3 LINK
Audio input from an MP3 player.
Back connectors
a DC IN
Connects to the AC-DC adapter. (Model:
PHILIPS G721DA-270250)
6
EN
b VIDEO OUT
Connects to the composite video input on
Option 2: Connect to theTV through
composite video (CVBS)
the TV.
c HDMI OUT
Note
Connects to the HDMI input on the TV.
• The composite video cable or connector might
be labeled AV IN, VIDEO IN, COMPOSITE or
BASEBAND.
d FM ANTENNA
Connects the FM antenna for radio
reception.
e COAXIAL IN
Connects to the coaxial audio output on
the TV or a digital device.
TV
f AUX IN
Connects to the analog audio output on the
TV or an analog device.
Connect to theTV
Connect your home theater directly to a TV
through one of the following connectors (from
highest to basic quality video):
Option 3: Connect to theTV through
SCART
Use the supplied scart adapter.
a HDMI
b Composite video
c SCART
TV
Option 1: Connect to theTV through
HDMI
TV
Note
• If the HDTV has a DVI connector, connect
using an HDMI/DVI adapter.
• If the TV supports EasyLink HDMI CEC,
control the home theater and TV with one
remote control (see ‘Use Philips EasyLink’ on
EN
7
Option 3: Connect audio through an
HDMI cable
Connect audio fromTV or
other devices
Note
Use your home theater to play audio from theTV
or other devices such as a cable box. Choose from
the following connectors.
• The HDMI connector on the TV might be
labeled HDMI 1 or HDMI ARC. This feature
works with Audio Return Channel (ARC)
compatible devices only.
Option 1: Connect audio through a digital
coaxial cable
Note
TV
• The digital coaxial cable or connector might be
labeled COAXIAL DIGITAL OUT or SPDIF
OUT.
(Cable not supplied)
TV
Option 2: Connect audio through analog
audio cables
TV
8
EN
Change sound mode
5 Use your home
theater
Select predefined sound modes to suit your
video or music.
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
Press SOUND MODE repeatedly to cycle
through the available sound modes.
Check that you:
•
Make the necessary connections and
complete the setup as described in the
Quick Start.
Switch the TV to the correct source for the
home theater.
Sound
mode
Description
ROCK
Enhanced low and high-range. Ideal
for action movies and rock or pop
music.
•
JAZZ
Clear mid and high-range. Ideal for
drama movies and jazz music.
Choose your sound
CLASSIC Neutral sound. Ideal for live
concerts and classical music.
This section helps you choose the ideal sound for
your video or music.
SPORTS Moderate mid-range and surround
effects for clear vocals and the
atmosphere of a live sport venue.
Change treble or bass
NIGHT
Dynamically controlled sound
mode suitable for watching movies
at night or for non-intrusive
background music.
Change the high frequency (treble) or low
frequency (bass) settings of the home theater to
suit your video or music.
Change virtual surround mode
DVS (Dolby Virtual Speaker) technology
creates a highly compelling 5.1-channel listening
experience from as few as two speakers.
1
2
Press TREBLE or BASS.
Press
+/- within five seconds to increase
or decrease treble or bass.
During play, press SURROUND to switch on or
off the surround sound effect.
EN
9
Use picture options
Synchronize audio with video
Access several useful features while viewing pictures.
If the audio and video are not synchronized, you
can delay the audio to match the video.
Button
Action
1
Press AUDIO SYNC.
Rotates the picture counter-
clockwise or clockwise.
/
» The audio sync message appears on the
display panel.
Skips to the previous or next picture.
/
2
Press +/- within five seconds to sync the
audio with your video.
REPEAT
Repeats a single file in the folder or
repeats the entire folder.
Shuffles files in a folder.
Note
Displays photo albums in a
thumbnail overview.
INFO
• This feature is applicable only if the audio/
video source is connected through the TV.
Use audio options
Press the following button to access more
features while audio is played.
Play from a USB storage device
The home theater is fitted with a USB connector
that allows you to view pictures or listen to music
stored on a USB storage device.
Button
Action
REPEAT
Selects or turns off repeat
mode.
1
2
Connect the USB storage device to the
home theater.
Note
Press USB.
» A content browser appears.
• If the USB storage device does not fit into the
connector, use a USB extension cable.
• The home theater does not support digital
cameras that need a computer program to
display photos.
• The USB storage device must be FAT or DOS-
formatted, and Mass Storage Class compliant.
3
4
Press the Navigation buttons to select a
file, then press OK.
Use the following buttons to control play:
Button
Navigation
Action
Navigate menus.
buttons
More play features for USB
OK
Confirms an entry or
selection.
Several advanced features are available for
picture playback from a USB storage device.
Starts, pauses or resumes
play.
Stops play.
Skips to the previous or next
track, or file.
/
/
Play a musical slideshow
Play music and pictures simultaneously to create
a musical slideshow. The files must be stored on
the same USB storage device.
Fast backwards or fast
forwards. Press repeatedly to
change the search speed.
1
2
3
Select a music track, then press OK.
Press BACK and go to the picture folder.
ZOOM
Zooms into a picture.
Select a picture, then press OK to start
slideshow.
4
5
Press
Press
to stop slideshow.
again to stop music.
10 EN
Repeat play a specific section
Play from an MP3 player
Select sections of audio for repeat playback.
Connect and play audio files from an MP3 player
or other external audio devices.
1
2
During playback, press REPEAT A-B to
mark the start point.
1
2
Connect the MP3 player to the home
theater.
Press REPEAT A-B again to mark the end point.
» Repeat play starts.
Press MP3 LINK.
» ‘MP3 LINK’ appears on the display panel.
» To cancel repeat A-B, press REPEAT A-B
again.
3
Press the buttons on the MP3 player to
select and play audio files.
Note
• Repeat play is only possible within a track.
Use Philips EasyLink
The home theater supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Play from radio
1
2
Check that the FM antenna is connected.
Press RADIO.
» “AUTO INSTALL...PRESS PLAY’ appears
on the display panel if you have not
Note
installed any radio stations. Press
.
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
3
Press the following buttons to control play:
Button
Action
1
Switch on the HDMI CEC operations on
the TV and other connected devices. See
the manual of the TV or other devices for
details.
Selects a preset radio station.
Searches for a radio station.
Fine tunes a radio frequency.
/
/
2
3
4
5
Press SETUP.
Press and hold to erase the
preset radio station.
Select [General Setup], then press OK.
Select [EasyLink Setup], then press OK.
Select and adjust the following settings:
PROGRAM Manual: Press once to access
program mode, press
assign a number to the radio
/
to
•
[EasyLink] : Enables or disables
EasyLink.
station, then press again to store
the radio station.
Automatic: Press and hold for
three seconds to reinstall radio
stations.
•
[One Touch Play] : Enables or disables
One Touch Play.
If enabled, you can use the remote
control to start USB play in the
home theater and the TV switches
automatically to the correct channel.
[One Touch Standby] : Enables or
disables One Touch Standby.
Note
•
• The home theater can store up to 40 radio
stations.
• Press to stop the installation.
• AM and digital radio are not supported.
• If no stereo signal is detected, or if fewer than
five stations are found, you are prompted to
install the radio stations again.
If enabled, the home theater can
be switched off to standby by a
remote control from the TV or other
connected HDMI CEC devices.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
EN 11
•
•
[System Audio Control] :Enables or
disables System audio control.
6 Change settings
This section helps you to change the settings of
your home theater.
If enabled, follow the instructions on
the TV to map the connected devices
correctly to the audio connectors of
the home theater. The home theater
switches automatically to the audio
source of the connected device.
[Audio Input Mapping] : Updates audio
input mapping if there are new devices
connected.
Caution
• Most of the settings are already configured
with the best value for the home theater.
Unless you have a specific reason to change a
setting, it is best to leave it at the default value.
6
Press OK to confirm your choice.
Note
Access the setup menu
• The connected devices must be connected
through HDMI and switched on.
1
Press SETUP.
» The following menu appears.
Symbol
Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
3
Select a setup menu, then press OK.
See the following sections for information
about how to change the settings of your
home theater.
Press
BACK to return to the previous
menu, or press SETUP to exit.
Note
• You cannot change a setting that is grayed out.
12 EN
Change general settings
Change video settings
1
2
3
Press SETUP.
1
2
3
Press SETUP.
Select [General Setup], then press OK.
Select [Video Setup], then press OK.
Select and adjust the following settings:
Select and adjust the following settings:
•
[EasyLink Setup] : Sets up EasyLink to
enjoy easy controls of all the HDMI
CEC compliant devices using a single
•
•
•
•
[TV System] : Selects a TV system that
is compatible with the TV.
[TV Display] : Selects a picture display
format to fit the TV screen.
[Picture Settings] : Selects a
predefined color setting.
•
•
•
[Display Dim] : Changes the brightness
of the display panel.
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
[OSD Language] : Selects the on-
screen display menu language.
[Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
4
Press OK to confirm your choice.
Note
•
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specific time.
• The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• Some video settings depend on the video
source, ensure that the TV supports the
setting or feature.
4
Press OK to confirm your choice.
Change audio settings
• For settings related to HDMI, the TV must be
connected through HDMI.
1
2
3
Press SETUP.
Select [Audio Setup], then press OK.
Change preference settings
Select and adjust the following setting:
[HDMI Audio] : Enables or disables HDMI
audio output for the TV.For settings related
to HDMI, the TV must be connected
through HDMI.
1
2
3
Press SETUP.
Select [Preference Setup], then press OK.
Select and adjust the following settings:
4
Press OK to confirm your choice.
•
•
•
[MP3/JPEG Display] : Displays the
MP3/JPEG folders or all the files.
[Version Info.] : Displays the software
version for the home theater.
[Default] : Resets the home theater to
the default settings programmed at the
factory.
4
Press OK to confirm your choice.
EN 13
7 Update software
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
8 Product
specifications
Note
• Specification and design are subject to change
without notice.
Check software version
Playback medium
USB storage device
File Format
1
2
Press SETUP.
Select [Preference Setup] > [Version Info.],
then press OK.
» The software version is displayed.
•
•
Audio: .mp3, .wma
Picture: .jpg
Amplifier
•
•
•
Total output power: 300 W RMS
Frequency response: 20 Hz-20 kHz / ±3dB
Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
Update software from a USB
storage device
1
Check for the latest software version on
•
Input sensitivity:
•
•
AUX: 2 V
•
Search for your model and click on
‘software&drivers’.
MP3 LINK: 1 V
Video
•
•
2
3
4
Download the software onto a USB storage
device.
Signal system: PAL / NTSC
HDMI output 480p, 576p, 720p, 1080i,
1080p
Connect the USB storage device to the
home theater.
Audio
•
Follow the instructions on the TV to
confirm the update.
S/PDIF Digital audio input:
Coaxial: IEC 60958-3
Sampling frequency:
•
» When the update is complete, the home
•
theater automatically switches to standby.
•
•
MP3: 32 kHz, 44.1 kHz, 48 kHz
5
Disconnect the power cord for a few
seconds and then reconnect it.
WMA: 44.1 kHz, 48 kHz
•
Constant bit rate:
•
•
MP3: 112 kbps - 320 kbps
Caution
WMA: 48 kbps - 192 kbps
• Do not turn off the power or remove the USB
storage device when the software update is in
progress because you might damage the home
theater.
Radio
•
•
•
Tuning range: FM 87.5-108 MHz (50 kHz)
Signal-to-noise ratio: FM 50 dB
Frequency response: FM 180 Hz-10 kHz /
±6dB
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage
Class)
•
•
File system: FAT12, FAT16, FAT32
Maximum memory support: < 160GB
14 EN
Main Unit
9 Troubleshooting
•
Power supply: 27 Vdc; 2.5 A (External
switching power adapter)
•
•
•
•
•
•
Power consumption: 35 W
Warning
Standby power consumption: < 1 W
Impedance: 8 ohm woofer, 8 ohm tweeter
Speaker drivers: 3” woofer, 1.5” tweeter
Frequency response: 150 Hz ~ 20 kHz
Dimensions (WxHxD): 790.6 x 100.3 x 50
(mm)
• Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to repair the
product yourself.
If you have problems using this product, check the
following points before you request service. If you
still have a problem, register your product and get
If you contact Philips, you will be asked for the
model and serial number of your product.The
model number and serial number are on the back
or bottom of your product.Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
•
Weight: 1.5 kg
Switching power adapter (G721DA-270250)
•
•
Input: 100-240 Vac; 50-60 Hz; 1.35 A
Output: 27 Vdc; 2.5 A
Subwoofer
•
•
•
•
•
•
•
•
Power supply: 220-240 V; ~50 Hz
Power consumption: 35 W
Standby power consumption: < 1 W
System: Bass Reflex System
Impedance: 8 ohm
Speaker driver: 6” woofer
Frequency response: 35 Hz ~ 200 Hz
Dimensions (WxHxD): 182 x 365 x 306
(mm)
Weight: 6 kg
Main unit
The buttons on this home theater do not work.
•
Disconnect the home theater from the
power outlet for a few minutes, then
reconnect.
•
Wall Mount
•
•
Dimensions (WxHxD): 440 x 60 x 23 (mm)
Weight: 0.54 kg
Picture
No picture.
•
Ensure that the TV is switched to the
correct source for the home theater.
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace
with a new HDMI cable.
Sound
N1o soInuSntdanfrdobmy, spurbewssoaonfedrhold (Stop) on the
remote control until [PAIRING] flashes on
the main unit.
2
Press and hold PAIR on the subwoofer
until the blue and green indicators on the
subwoofer flash alternately.
3
If the wireless connection succeeds, [PAIR
OK] is displayed and the green indicator on
the subwoofer lights up.
EN 15
•
If the wireless connection fails, [PAIR
FAIL] is displayed, and the blue and green
indicators on the subwoofer remain lit.
Check whether there is any interference
from nearby electronic devices. Remove the
conflict or strong interference, then repeat
the above procedures.
10 Index
A
amplifier
audio
synchronize with video
audio input mapping
No sound.
Ensure that the audio cables are connected
•
and select the correct input source (for
example, AUX, USB) for the device you
want to play.
C
care
No sound on HDMI connection.
change settings
connect
guide
TV
connectors
contact us
•
You might not hear any sound if the
connected device is not HDCP (High-
bandwidth Digital Content Protection)
compliant or only DVI compatible. Use an
analog or digital audio connection.
•
Ensure that the [HDMI Audio] is enabled.
No sound fromTV program.
•
Connect an audio cable from the audio
input on the home theater to the audio
output on the TV. Then select the correct
input source, for example, AUX or COAX.
E
EasyLink
settings
Distorted sound or echo.
•
Ensure that the TV volume is muted or set
to minimum if you are playing audio through
the home theater.
F
file formats
Audio and video are not synchronized.
•
1) Press AUDIO SYNC. 2) Press +/- within
five seconds.
H
HDMI CEC (see Easylink)
Play
M
The contents of a USB storage device cannot be read.
MP3
play
•
Ensure that the format of the USB storage
device is compatible with the home theater
•
Ensure that the USB storage device
is formatted with a file system that is
supported by the home theater (note that
NTFS is not supported).
O
one-touch play
one-touch standby
overview
‘No entry’ or ‘x’ sign appears on theTV.
The operation is not possible.
EasyLink feature does not work.
connectors
main unit
remote control
•
•
Ensure that the home theater is connected
to a Philips brand EasyLink TV and that
EasyLink is on.
P
I do not want my home theater to be switched
on when I switch on myTV.
•
picture
options
This is the correct behavior for Philips
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink.
slide show
thumbnail overview
troubleshooting
16 EN
play
MP3 player
radio
troubleshooting
product care
product specifications
R
radio
play
program
tune
recycle
remote control
rotate pictures
S
safety
slideshow
software
update
version
sound
mode
treble and bass
troubleshooting
system audio control
T
troubleshooting
TV
connect
U
USB
software update
V
video
synchronize with audio
EN 17
Language Code
Abkhazian
Afar
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Afrikaans
Amharic
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
7585
7679
7665
7686
7666
Chamorro
Chechen
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
Chewa; Chichewa; Nyanja7889
9072
9065
中文
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Herero
Hindi
7982
7977
7983
8073
8065
7065
8076
8084
Hiri Motu
Hrwatski
Ido
Panjabi
Interlingua (International)7365
Persian
Interlingue
Inuktitut
7365
7385
Polski
Português
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
sgptt_1039/12_v4
|