Rear-projectionTV
with HD Input
46PW9527
51PW9527
3135 035 xxxxx
PRODUCT HIGHLIGHTS
Philips HD Pix Optics System answers the demand for extreme resolution HD with cutting-edge processing and display technolo-
gy, including microphosphor CRTs, hybrid projection lenses, first-surface mirrors, fine-pitched lenticular screens, and Philips wide-
band amplifier.
®
Auto IntelliSense Focus Automatically adjusts the picture convergence at the push of a key.After reviewing a special test pattern,
®
optical sensors send position information to the controller, which then corrects the picture.Auto IntelliSense Focus responds to
the natural and man-made magnetic field conditions where the projection TV is located, so you always enjoy the best possible pic-
ture.
100Hz Digital Scan eliminates picture flickering and line jitter, offering a stable picture for relaxed viewing (no eye strain).The
100Hz digital scan option can be selected in the onscreen menu.
Progressive Scan doubles the number of visible picture lines per field by displaying all picture frame lines at once.This minimizes
the visibility of the scan lines.The progressive scan can be selected in the onscreen menu.
High-definition Inputs allow you to connect digital equipment with 1080i and 480p signals for 60Hz and 576p signals for 50Hz.The AV4
sockets are forYPbPr or RGB+HV sync connections.The AV5 sockets are for RGB (orYPbPr with adapter) DB15 connections, plus audio.
ComponentVideo Inputs support advanced video input—such as DVD video—for superb colour performance.
Active Control™continuously measures and corrects all incoming signals with automatic digital noise reduction and auto sharp-
ness to provide the best possible picture.
Automatic Phosphor Aging Compensation (APAC™) functions like a screen saver for your TV. Nonmoving images can be bad
for a television screen. If a video image remains stationary, it can eventually leave a permanent after-image.Video games and the sta-
tionary black bars around some movies are examples of sources of concern. Philips APAC technology addresses this problem.
Periodically,APAC automatically shifts your television picture in increments that are very small and yet large enough to blur image
retention that can lead to screen burn. Coupled with the Philips Auto Screen Format feature,APAC helps provide you protection
from the dreaded screen burn.
Protective Screen Filter (if provided; availability varies) gives the best possible picture while still protecting your investment. Specifically
formulated by Philips for HD displays, this protective screen filter helps prevent accidental damage to the delicate front lenticular screen.
Dolby*Virtual Surround uses two speakers to simulate the surround effect produced by a multichannel system.
Digital Comb Filter makes the finest colour details purer and sharper. It eliminates disturbing cross-colour (Moiré) effects between
different colours that you normally see with striped clothing worn on camera.The digital comb filter works by electronically sepa-
rating the chroma (colour) and luminance (black and white) components of the TV signal, preventing cross-colour interference.
Dual-window,Two-tuner Picture-in-picture (PIP) allows you to watch two shows, side by side. No video recorder is necessary for
tuning PIP pictures.Your set’s two separate tuners let you select two shows and display both in windows of equal proportion.
Supporting Features
• Digital Colour Transient Improvement (CTI)
• Digital Histogram
• Picture Freeze
• Auto Aspect Ratio Adaptation (and 4:3, expand 4:3, panorama, wide screen)
• Incredible Surround™
• AutomaticVolume Leveler (AVL)
• Independent HeadphoneVolume Control
• Easy Tune™ (Auto Search,Auto Tune, and Auto Install)
• Alternate Channel
• Smart Surf
• Low-power standby (<1 W)
Active Control, APAC, Easy Tune, Incredible Surround, and IntelliSense are trademarks of Philips Consumer Electronics North America.
IntelliSense is a registered trademark of Philips Consumer Electronics North America. Copyright 2002 Philips Consumer Electronics.
*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
3
INSTALLING THE TV
The major benefit of this projection tele-
vision is its large viewing screen.To see
the large screen at its best, test various
locations in the room to find the optimal
spot for viewing.
1
15 cm
Be sure to allow a minimum of 15 cm
of space around the TV.
Do not place
the TV in
direct
sunlight or
near a heat-
ing appliance.
To avoid cabinet warping, cabinet color
changes, and increased chance of set
failure, do not place the TV where tem-
peratures can become excessively
hot—for example, in direct sunlight or
near a heating appliance.
15 cm
15 cm
Magnetic fields, such as those of external
speakers, may cause the picture to dis-
tort if the speakers are placed too close
to the television. Move the magnetic field
source away from the TV until there is
no picture distortion.
ANTENNA IN 75Ω
Socket on the rear of
the TV
Insert the aerial plug firmly into the
ANTENNA IN 75Ω socket at the rear
of the set.
2
3
Insert the mains plug in the wall sock-
et. Refer to the back of the TV set for
the correct operation voltage. Consult
your local dealer if your main supply is
different. To prevent damaging the
mains (AC) cord, which could cause
hazard, do not place the TV on the
cord.
Remove the cover of the battery com-
partment on the remote control. Insert
the two batteries supplied
4
(Type R6-1.5V).
The batteries supplied do not contain
the heavy metals mercury and cadmi-
um. Nevertheless, in many countries
exhausted batteries may not be dis-
posed of with your household waste.
Please check on how to dispose of
exhausted batteries according to local
regulations.
See the battery caution statement on
page 2.
Note : This remote control functions
with TVs that use the RC5 signalling
standard.
Switch the TV on : Press the mains
power switch on the front of the TV. If
Standby key is lighted, press the CH
+/– keys, digit keys, or the Standby
key on the remote control. Or press the
CHANNEL or Standby keys on the
front of the TV.
5
V
O
L
U
M
E
CHANNEL
INTELIES
ME
OR
Standby
Key
Mains Power
Key
4
USING THE TV KEYS
VOL
UM
E
CHA
NNE
L
INTE
LLIS
ENS
E
MEN
U
POW
ER
MAINS POWER KEY
Switches the mains power on or off.
STANDBY
Switches theTV on or
activates standby mode.
fi%
VOLUME
REMOTE SENSOR
fi
The key adjusts the sound volume
Receives infrared commands to acti-
vate controls when the remote-con-
trol handset is aimed at it and remote
keys are pushed.
%
softer.The key adjusts the sound
volume louder. When using the on-
fi %
screen menu, pressVolume
to navigate right and left and down.
or
MENU
%fi
CHANNEL
Press to activate th on-screen menu.
Navigate the menu by using the
Volume and Channel buttons.
fi
The key selects channels in descend-
%
ing order.The key selects channels in
ascending order. When using the on-
% fi
screen menu, press Channel
to navigate up and down.
or
IntelliSense
When pressed, automatically adjusts
the set’s picture convergence using
the Auto IntelliSense® focus feature.
5
USING THE REMOTE CONTROL KEYS
SOURCE
SELECT
SOURCE SELECT
POWER
AMP
Press to select the AV input for the device you want to use: AV1, AV2,
AV3, AV4, or side
ACCESSORY MODE
TV
CBL
SAT
VCR
DVD
Press to control an accessory device with the remote control. You can
control a TV, CBL, VCR or Amplifier by pressing the button once. A
green indicator lights up. When you press the button again for 1 sec-
ond you can control a HD, SAT, DVD, or CD. A red indicator lights
up. To return to TV mode press the TV button.
CD
HD
Q
q
l
PIXEL
PLUS
DNR VCR Prog. EXIT
INFO+
DISPLAY FORMAT
i
Press to select a picture format. A menu appears with the following
options: Automatic, Super Zoom, 4:3, Movie Expand 14:9, Movie
Expand 16:9, 16:9 Subtitle, and Wide Screen. Press the button to
scroll through the choices.
S
CC
PIXEL PLUS™
MENU
Press to see a demonstration of Pixel Plus. The Left half of the screen
has Pixel Plus and Digital Natural Motion turned on and right half of
the screen has Pixel Plus and Digital Natural Motion turned off. Press
the button again to switch the demonstration off.
Ï
OK
FREEZE
CH
V
¬
Press to freeze the main picture when PIP is off. In teletext mode,
press to hold a page.
DYNAMIC NOISE REDUCTION (DNR)
Press to select Off, Minimum, medium, or maximum.
1
4
2
5
8
0
3
OK
Press to activate or select menu choices
6
9
CURSOR LEFT
Press to navigate the menus and adjust the settings.
7
VOLUME +/–
Increases or decreases volume.
SURF
DIGITS 0-9
Press to select a channel. For Channels with two digits, you must
press the second digit within 2 seconds.
SMART SURF
º
®
C
Press to use the Smart Surf feature. If you have Smart Surf set to 2-
channels, it will return you to the previously viewed channel. If Smart
Surf is set to 9-channel a menu appears with the 9 previously viewed
channels.
Ò
‡
π
†
VCR BUTTONS
Use with a Video recorder. Press
®
Ò
†
to record,
and
to search,
ACTIVE
CONTROL
SOUND
PICTURE
‡
π
to stop and to play. Press C to activate the timer.
M
h
a
SOUND
Press to select a preset sound setting.
b
c
fi
ZOOM
PICTURE-IN-PICTURE (PIP)
Press to access the Picture-in-Picture and Dual-window features.
SWITCHING DUAL SCREEN
Press to switch dual screen/PIP formats.
Multipip
Press to select
*Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Pixel Plus, Incredible Surround, and Active Control are trademarks
of Philips Consumer Electronics. Copyright 2003 Philips
Consumer Electronics. All right reserved.
6
USING THE REMOTE CONTROL KEYS
STANDBY
SOURCE
SELECT
• Switches the set on and off from standby mode. (The red light indi-
POWER
AMP
cator lights up when the set is in standby mode.)
ALT AUDIO (if available)
Press to toggle between SAP (Second Audio Program) and the pri-
mary audio.
TV
CBL
SAT
VCR
DVD
SURROUND MODE
Press to select the surround sound mode:
Dolby*Virtual
CD
HD
Q
q
l
PIXEL
PLUS
DNR VCR Prog.EXIT
INFO+
Dolby Virtual uses two speakers to simulate the surround effect
produced by a multichannel system.
i
Incredible Surround™
• The Incredible Surround™ feature provides the feeling that the speakers
are farther apart to enhance the home-cinema effect.
S
CC
VCR PROG.
MENU
Press to access the VCR program if available
Ï
OK
i+ (STATUS)
• Press to display information about the current channel and pro-
gramme, or .when navigating the On-Screen-Display menus. infor-
mation about the selected item.
CH
V
¬
EXIT
Press to exit the menus of accessory devices.
CC
1
4
2
5
8
0
3
Press to turn Closed captioning On, Off, or On with Mute
MENU ON/OFF
Press to turn the on-screen menu on and off.
6
9
7
CURSOR UP, DOWN, RIGHT
Press to navigate the menus and adjust the settings
SURF
CHANNEL +/–
Press to select channels in ascending and descending order.
MUTE
Press to mute the sound. To restore the sound, press the key again.
º
®
C
Backlight
Ò
‡
π
†
Press to light the volume, channel, and digit buttons for 5 seconds.
No Function
ACTIVE CONTROL™
ACTIVE
CONTROL
SOUND
PICTURE
Press to switch the Active Control™ feature on or off. When Active
Control™ is on, it measures and corrects all incoming signals to pro-
vide the best picture-quality settings, controlling Sharpness and Noise
Reduction continuously and automatically. The onscreen Active
Control™ display items cannot be selected. See page 22.
M
h
a
b
c
fi
ZOOM
SMART PICTURE
Press to select from a list of preset picture options.
ZOOM
Press to activate zoom mode. Press OK repeatedly to select the Zoom
level (x1, x4, x9, x16).
7
USING THE MENUS : OVERVIEW
Press the MENU Ï key on the remote control
to summon the main menu.
Note: Should your remote control be lost or broken you
can still use the keys on the front of the TV. See p. 8.
1
2
SOURCE
SELECT
POWER
AMP
TV
CBL
SAT
VCR
DVD
Press the cursor button up or down to select the
TV, Settings, Install or Demo menu.
Note: Sometimes not all the menu items are visible on
HD
CD
q
Q
l
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
i
the screen. Press the cursor down to reveal all items.
return or switch
main menu
on/off
S
CC
Use the cursor button left or right to select the
menu item.
MENU
3
4
5
Ï
OK
Use the cursor button up or down again to select
the control you want to select or to adjust. For
instance, see Picture menu.
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
Press the MENU Ï key to turn off the main
menu.
The menu system
Pipes, balls and a puck
The hierarchy of menus and controls is represented by an
animated visual mechanism of pipes, balls and a puck.The
animated mechanism constantly shows the current where-
abouts in the menu structure.
puck
pipes
The puck surrounds the ball indicating the user’s current
position in the menu hierarchy.The puck is always present
when the menu system is displayed.
balls
The puck is divided into 4 parts.They correspond to the
directional controls (up/down, left/right) on the remote con-
trol.The arrows on the cursor indicate which directions to
choose.
When menu items cannot can fit on the TV display, only a
portion is shown.
Those omitted are indicated by a cluster of.
Picture Sound
Features
Direct selection and control
Menu items are controlled as soon as they are selected.
Only a few items require information with the OK key.
TV
100 Hz Dig. Scan
Pixel Plus
Double lines
List controls
Digital options
A list control is used to select one or more items from a
list of options. Press the right key to move the puck into
the list.At least one item is the current value and is high-
lighted.
Moving the puck up or down with the up/down key causes
the list to move up or down.
8
USING THE MENUS : INSTALL
Press the MENU Ï key on the remote control.
1 When you switch on your TV for the first time and no chan-
w
B
nels are stored so far, the menu Language automatically
appears on the screen. This menu also has an additional
item Exit with which the menu can be dismissed.The
explanation appears in different languages one at a time.
Choose your preferred language and press the OK key on
the remote control. Proceed with the Install menu.
VCR
DVD
AMP
AUX
b
S
fi
PIXEL
PLUS
b
Use the cursor down to select Install.
MENU
Ï
OK
2
3
4
V
¬
CH
Use the cursor right to select Language.
Follow the instructions on screen.
1
2
5
8
0
3
6
Use the cursor up/down to select your preferred
language and press the OK key to confirm your
selection.
4
7
9
i
0
Proceed with the Install menu.
AT
SMART
5
Language
Install
English
....
.....
Automatic Channel installation
Select Automatic installation in the Install menu.
Note:All channels must be unlocked in order to autopro-
gram. If requested, enter your PIN to unlock all channels.
(See TV, Features menu, Child lock, p. 13.)
1
Automatic install
Install
Press the cursor down.
The autoprogramming option label Start appears.
Install
Start
2
You can now search for and store the TV channels in
two different ways: using Automatic Installation or
Manual Installation (tuning-in channel by channel).
Select your choice with the cursor right.
Note: Channel numbers and names will always be written in
Latin characters, even when a language has been selected
which uses other characters.
Press the cursor right.
3
The message Searching appears and the progress
of autoprogramming is displayed.
4
When the Automatic installation is complete, the puck
navigates to Install again.
The programme list is automatically filled with all the
programme numbers of the TV channels transmitted.
Manual install
Manual Channel installation
Install
System
Select Manual installation in the Install menu.
Programme
Search
1
Press the cursor down.
Follow the instructions on screen.
Fine tune
Antenna level
Store
2
Note: Search or direct selection of a TV channel. If you know
the frequency, enter the 3 digits of the frequency directly with
the digit keys 0 to 9 (e.g. 048). Press the cursor down to pro-
ceed.
Searching for and storing TV channels is
done channel by channel.You must go
through every step of the Manual
Installation menu
Repeat to search for another TV channel.
3
9
USING THE MENUS : INSTALL
Give name
® Space
® Delete
p
π
VCR1
BBC1
BBC2
CNN
TVE
Select Give Name in the Install menu and press the
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z
1 2 3
4 5 6
7 8 9
0
cursor down.
1
2
3
Select the programme number.
Note: keep the cursor up/down pressed to scroll
through the programme list quickly.
® Shift
(® Special)
π.....
Press the cursor right. A keyboard appears on the
screen. Only European characters are displayed.
Note:
- Dependent on the language selected in the language
menu, the key Special is available or not.
It is possible to change the name stored in the
memory or to assign a name to a TV channel
for which a name has not yet been entered.A
name with up to 5 letters or numbers can be
given to the programme numbers 0 to 99. For
example SUPER, BBC1,... Before programme
number 0 you can also enter a name for the
peripherals that are connected to an external
input.
- When you select Arabic, you can toggle the Special key
to display Arabic or English characters.The Shift key is
changed to More. Press the More key to toggle between
part 1, 2 or 3 of the Arabic character sets.
Press the cursor right to enter the keyboard.
Press the cursor up/down, left/right to select the first
character and press OK. Repeat for every character you
want to enter.
Select Space to enter a space; Delete to erase the
highlighted character in the name entered; Shift to display
upper- or undercast characters on the keyboard; Special
to display special characters on the keyboard. Press OK
to confirm.
Press the cursor left repeatedly when you have fin-
ished naming the selected channel or peripheral.
4
5
Select another programme number and repeat steps
3 to 5.
Reshuffle
Favorite channels
Reshuffle the programme list
According to your preference you can change the
order of the stored TV channels.
π
VCR1
BBC1
BBC2
CNN
TVE
Select Reshuffle in the Install menu and press the
OK key.
1
2
Follow the instructions on screen.
π.....
Reshuffle
Favorite channels
Favorite channels
Select Favourite TV channels
Select Favourite programmes in the Install
menu.
1
2
π
Yes
Yes
Yes
Yes
Yes
Yes
•
•
•
•
•
•
No
No
No
No
No
No
VCR1
BBC1
BBC2
CNN
TVE
Select your programme number with the cursor
up/down.
Select Yes or No with the cursor right.
3
Repeat 2 and 3 for every TV channel or external
you want to make a favourite or a non-favourite TV
channel or external.
2
4
10
USING THE MENUS : PICTURE
Picture menu
Use the Picture menu to adjust picture settings. Use the on-
screen Menu-Info i for more information about the menu
items.
Press the MENU Ï key on the remote control to
summon the main menu.
Press the cursor right to select Picture.
Picture Sound Features
Smart picture
TV
1
Contrast
Brightness
Colour
Sharpness
Tint
2
Select the menu items in the Picture menu with the
cursor up/down.
Adjust the settings with the cursor left/right or enter
the list of submenu items with the cursor right.
3
4
Digital options
Dynamic contrast
DNR
Select a submenu item with the cursor up/down.
5
Colour enhancement
(Hue)
The modified adjustments for Contrast, Brightness,
Colour, Sharpness,Tint, Digital options and Dynamic
Contrast are automatically stored.
Picture format
Select Factory settings in the Setup menu, General, to
restore the predefined factory settings, see p. 14.
Digital options with PAL signals
Although Pixel Plus is the most ideal setting, it may be
preferable, dependent on your own preference, to select
Double lines, or 100 Hz Digital Scan.
• 100 Hz Dig. Scan 100 Hz + Dig. Scan (Field and line flick-
er reduction) without motion compensation.
SOURCE
• Pixel Plus creates near High Definition performance
inside the TV on the basis of a regular input signal.
The number of lines are increased and the number of pix-
els on a line are doubled in combination with Digital
Natural Motion.As such Pixel Plus enhances both regular
broadcast signals and DVD or Digital TV input towards
unparalleled sharpness and depth, near High Definition
and natural detail.
• Double Lines provides for a doubling of vertical and hori-
zontal resolution which adds astonishing sharpness and a
total absence of visible picture lines.
Motion compensation reduces jitter and offers smooth,
yet sharp motion reproduction.
SELECT
POWER
AMP
TV
CBL
SAT
VCR
DVD
HD
CD
q
Q
l
return or switch
main menu
on/off
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
i
S
CC
MENU
Ï
OK
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
Digital options with NTSC signals
• Progressive Scan line doubling eliminates line flicker.
• Pixel Plus
Note:
- Pixel Plus is not active when Multipip,Teletext (Except when
Subtitling is activated) or Teletext Dual screen is selected.
- When having selected Pixel Plus, the size of the menus on
screen is reduced.This is a normal behaviour.
- Interference, caused by fluorescent lights just above the TV, may
occur when having selected Pixel Plus.
11
USING THE MENUS : SOUND
Sound menu
Use the Sound menu to adjust sound settings. Use the on-
screen Menu-Info i for more information about the menu
items.
Sound
TV
Smart sound
Equalizer
Volume
Press the MENU Ï key on the remote control to
summon the main menu.
1
Balance
Press the cursor right to select Sound.
Loudness
2
Headphone volume
Surround mode
Dual I-II
Select the menu items in the Sound menu with the
cursor up/down and adjust the settings with the cur-
sor left/right.
Remember, control settings are at normal mid-range
levels when the bar scale is centred.
3
Mono/Stereo
Nicam/Analogue
AVL
Delta volume
Note:
- Smart Sound allows you to select from a list a preset sound
settings.
- Dual X is only available with dual sound transmission.
- Mono/Stereo is only selectable in case of analogue stereo trans-
mission.
- Nicam/Analogue is only selectable in case of Nicam transmis-
sion.
- AVL (Automatic Volume Leveller) Automatically controls the vol-
ume level to avoid excessive level differences, especially when
switching to another channel or during commercial breaks.
- Surround modes can not be modified when a headphone has
been connected.
Surround Modes
Dependent on the sound signal broadcasted, select one of
the Surround modes.
SOURCE
SELECT
POWER
AMP
TV
CBL
SAT
VCR
DVD
Incredible Surround™ enhances stereo
programs by making the sound broader and
fuller
HD
CD
q
Q
l
return or switch
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
main menu
on/off
i
S
CC
MENU
Ï
OK
Dolby* virtual creates a virtual surround
sound experience from two speakers.
DolbyVirtual retains all the original multi-
channel audio information and provides the
listener with the sensation of being sur-
rounded by additional speakers.
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
12
USING THE MENUS : FEATURES
Features menu
Use the Features menu to adjust sound settings. Use the on-
screen Menu-Info i for more information about the menu
items
Features
Channel list
TV
Subtitle
Sleeptimer
Child lock
On timer
Zoom
Press the MENU Ï key on the remote control to
summon the main menu.
1
Press the cursor right to select Features.
2
Select the menu items in the Features menu with the
cursor up/down and adjust the settings with the cur-
sor left/right.
3
Channel list
SOURCE
SELECT
POWER
•Press the OK key to switch over to the selected TV
channel or external.
TV
CBL
SAT
AMP
VCR
DVD
HD
CD
q
Q
l
Select subtitles
return or switch
main menu
on/off
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
i
•Switch on teletext and select the proper subtitle page
from the index.
S
CC
•Switch off teletext. Now the subtitle page is stored for
the selected TV channel.
•Once subtitles have been stored and Subtitle On has
been selected they will automatically be displayed on
the selected TV channels if subtitles are in the transmis-
sion.
•A symbol will indicate that the mode is on.
•Select On during mute when you want to have the
subtitles automatically displayed when the sound has
been muted with the ¬ key on the remote control.
MENU
Ï
OK
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
Child lock
Features
Select Child lock with the cursor down.
TV
1
Programme list
Subtitle
Press the cursor right to enter the Child lock menu.
Enter the access code.
Note:You have to re-enter your code each time you enter
the child lock menu.
2
Lock
Sleeptimer
Child lock
On timer
Programme lock
Custom lock
Unlock
Important: If you have forgotten your code:
• Select Cancel with the cursor down.
• Select Set/Change code in the Setup menu. See
General menu, Set/Change code, p. 13.
• Press OK.
• Press the cursor right and enter the overriding code 8-
8-8-8.
• Press the cursor again and enter a new personal 4-digit
code.The previous code is erased and the new code is
stored.
Note:The overriding code only works in the Set/Change code
menu.
Select one of the menu items of the child lock menu.
• Select Lock if you want to lock all channels and
externals.
3
• Select Custom lock and press the cursor right.
Select Programme lock if you want to lock the
programmes from a certain TV channel or external.
• Select Unlock to unlock all locked channels and
externals at once.
13
USING THE MENUS : GENERAL
General menu
Use the General menu to adjust settings that are not
changed often. Use the on-screen Menu-Info i for more
information about the menu items
General
Setup
Press the MENU Ï key on the remote control to
Menu background
summon the main menu.
Smart surf
Dual Screen Format
Freeze format
Factory settings
OSD
1
Press the cursor down to select Setup.
2
Press the cursor right to select General.
3
Programme title
Teletext level 2.5
Change code
Colour
Select the menu items in the General menu with the
cursor up/down and adjust the settings with the cur-
sor left/right.
4
Note:
SOURCE
SELECT
- Menu Background places a background behind the menu to
make it easier to read.
POWER
AMP
TV
CBL
SAT
VCR
DVD
- Smart Surf sets the Smart surf button for either a 9-channel
surf list or a previous channel toggle.
- Dual Screen Format sets the PIP button b to display a dual
screen, or a number of PIP windows.
- Freeze format sets which type of default Freeze option you
want to appear when you press the Freeze button S.
- Factory Settings resets the picture and sound settings to the
factory defaults.
- OSD sets the size of the volume and channel display.
- Programme title sets the TV to display the programme title
according to the teletext information.
HD
CD
q
Q
l
return or switch
main menu
on/off
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
i
S
CC
MENU
Ï
OK
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
- Teletext level 2.5 sets the TV to use Teletext level 2.5 which
supports more colors and and backgrounds.
- Change Code is used to set a new 4-digit personal code.
- Colour sets the correct colour system.
14
USING THE MENUS : SOURCE AND CONVERGE
Source
Source
Use this menu to select the peripheral you connected to
Setup
one of the external inputs.Use the on-screen Menu-Info i
for more information about the menu items
AV1
AV2
AV3
AV4
Side
Press the MENU Ï key on the remote control to
summon the main menu.
1
Press the cursor down to select Setup.
2
SOURCE
SELECT
POWER
Press the cursor right to select Source.
TV
CBL
SAT
AMP
VCR
DVD
3
Press the cursor down to select one of the external
inputs.
HD
CD
q
Q
l
return or switch
main menu
on/off
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
4
i
Press the cursor right to enter the list of names of
peripherals attached to the selected input.
S
CC
5
MENU
Ï
OK
Select the peripheral device with the cursor up/down.
cursor to select
adjustments
CH
V
¬
6
Once you have selected the source, e.g.VCR, this AV-input
will automatically be selected when your remote control is
inVCR mode and when you press theVCR button on the
remote control. See p. 23.
OK key to acti-
vate
1
2
5
3
Converge
Converge
Setup
With a projection TV the picture is created by projecting
light from multiple sources onto the screen. How well these
light sources align is called Convergence. Convergence can
get misaligned. You can tell by the appearance of “halos”
around the objects in the picture.You can either set the
convergence manually or have the TV do it automatically.
IntelliSense
Manual convergence
Converge red
Converge blue
Multipoint red
Multipoint blue
Save multipoint
Undo multipoint
Restore factory
Press the MENU Ï key on the remote control to
summon the main menu.
1
Press the cursor down to select Setup.
2
Press the cursor right to select Converge.
3
Press the cursor down to select IntelliSense or
Manual Convergence.
4
• To use IntelliSense, press OK. the TV will do the
rest.
• To use Manual Convergence, select the setting you
need to adjust.and use the Cursor to line up the
cross signs.
Press to begin
automatic
picture
V
O
L
U
M
E
CHANNEL
-
+
>
Intelli
ense
A
A
?
S
If you select Manual convergence, choose a type of
convergence to set.
M
ENU
5
convergence
Remember: Use the on-screen Menu-Info i for more
information about the menu items
®
Activating IntelliSense Using theTV Key
With the TV on, press the IntelliSense key on the front of
the TV. Picture convergence will be adjusted automatically in
20 seconds.
15
USING THE MENUS : DEMO
The Demo menu allows to demonstrate the TV features
separately or in a continuous loop.
Press the MENU Ï key on the remote control to
summon the main menu.
Select Demo in the Main menu with the cursor
down.
TV
Setup
Demo
Install
1
Auto demo
Dual screen
Zoom
2
Select Auto demo or one of the features with the
cursor right and press the OK key on the remote
control.
•If Auto demo has been selected the demo will
automatically present all the features sequentially in a
loop.
3
Teletext
Install
Main menu
Picture
Speakers
Active control
Dealer demo - Digital options
- Light sensor
- Comb filter
•Press one of the cursor keys to stop the Auto demo.
•If one of the features has been selected, this particu-
lar feature demo will run one time only, until activat-
ed again, and the Demo menu will reappear.
Select Dealer Demo
Select Digital options, Light sensor and Comb filter
On or Off to really see the difference in picture quality.
In Dealer Demo mode it is possible to change channels
with - CH + and to adjust the volume.
SOURCE
SELECT
POWER
TV
CBL
SAT
AMP
CD
VCR
DVD
HD
Note: the Dealer Demo is not part of the automatic sequence
and can only be activated separately.
q
Q
l
return or switch
main menu
on/off
PIXEL
PLUS
DNR VCR Prog. EXIT INFO+
i
S
CC
MENU
Ï
OK
cursor to select
adjustments
CH
V
¬
OK key to acti-
vate
1
2
5
3
16
USING PICTURE-IN-PICTURE (PIP)
The Picture-in-Picture (PIP) feature allows you to call up a
subscreen within your main screen to watch two more or
channels or a channel and a peripheral at the same time.
The Dual-window feature allows you to divide the main
screen into two subscreens so that two channels or a chan-
nel and an external source can be watched simultaneously.
Press the fi key on the remote control to switch
PIP on. You can set the default PIP size in the
General Menu, under Dual Screen format, p. 14.
7
0
9
1
SURF
Press and hold the b key choose another PIP
size.
2
®
C
º
Ò
‡
π
†
Switching Screens
fi
Press the c button to swap the main screen and the
b
auxiliary screen.
ACTIVE
SOUND CONTROL PICTURE
M
h
a
Changing PIP Channels.
Use the cursor to select the PIP window and change
channels normally.
b
c
fi
ZOOM
c
Moving the PIP screen
When a single PIP format is selected, press the OK but-
ton to make the PIP screen movable. Press the cursor
up/down, left/right to move the PIP screen in the direc-
tion of the cursor press.
Note:
- Multipip is disabled when a picture is being displayed
from the AV3 or AV4 source;
- Pictures from an AV3 or AV4 source will never be dis-
played in Multipip:
- Display Format is disabled when Multipip is active.
17
CONNECTING PERIPHERAL EQUIPMENT
Y ou can connect a wide range of video and audio equipment to your TV
in various ways.This page and the next one provide an overview of signal
compatibilities and the types of equipment you can connect to the sock-
ets. Connection examples follow on subsequent pages.As necessary, also
refer to the handbook for peripheral equipment.
REAR OFTV
Overview : Standard Inputs/Outputs
7
1
ANTENNA IN 75Ω socket—compatible with the broadcast
standard in your area. Use to connect radio-frequency (RF) signals
1
fromVHF/UHF antennas or a cable system.
YPbPr (component video input [CVI] sockets)—compatible
with 480i and 576i signals. Use to connect equipment having com-
2
6
4
5
4
ponent video outputs, such as DVD players, laser-disc players,
video-game players, satellite receivers, or other equipment. Use
the INPUT-AV 1 L(eft) and R(ight) AUDIO sockets for sound con-
nections.
7
S-VIDEO (super video) sockets—compatible with 480i and
576i signals. Use to connect peripherals having SuperVHS (S-VHS)
outputs, such asVCRs, DVD players, laser-disc players, video-game
players, satellite receivers, or other equipment.
3
3
3
5
2
VIDEO (composite) sockets
(INPUT-AV 1, INPUT-AV 2, andTV’s side socket panel
SIDE OFTV
4
3
[AV3])—compatible with 480i and 576i signals. Use to connect
peripherals having composite video outputs, such asVCRs, video-
game players, or other equipment.
4
G
5
AUDIO inputs (INPUT-AV 1, INPUT-AV 2, andTV’s side
socket panel [AV3])—use to connect from the audio output
sockets onVCRs, DVDs, or other peripherals.
5
8
MONITOR OUT (VIDEO/AUDIO)—use to connect to aVCR
to record programmes from the TV. Or use the AUDIO outputs
to connect to an audio hi-fi system.
6
Note : The
side panel is
AV3.
AMP SWITCH, CENTER
CHANNEL AMP INPUT, and
SUBWOOFER Output—use to make optional surround-sound
connections.
7
n Headphone socket (stereo, 3.5 mm)—use to connect
headphones for personal listening.The headphone impedance must
be between 8 and 4000 Ohms.
8
18
CONNECTING PERIPHERAL EQUIPMENT
The AV4 and AV5 sockets allow you to connect digital equipment with
1080i/480p (60Hz) or 576p (50Hz) signal output.
REAR OFTV
Overview : High-definition Inputs
2
AV3—use to connect digital equipment with a 1080i/480p (60Hz)
or 576p (50Hz) signal output, such as digital set-top boxes or
1
DVD players with progressive-scan capability.You can connect
equipment withYPbPr component video or RGB outputs to the
AV4 sockets. H andV Sync connections may or may not be
required for RGB connections. Use the AV4 L(eft) and R(ight)
AUDIO sockets for sound connections.
1
See the handbook for the device you are connecting.
AV4—use to connect digital equipment with a 1080i/480p (60Hz)
or 576p (50Hz) signal output, such as digital set-top boxes or
2
DVD players.The AV5 socket accepts a DB15 connector. Note,
however, that adaptors can also be used to connect from compo-
nent video output to this DB15 socket. Use the AV5 L(eft) and
R(ight) sockets for sound connections.
High-definition Inputs—Video Synchronizing Reference
See the handbook for the device you are connecting.
Input
Video Description AcceptsVideo Sync
according to :
AV4,AV5
480p (60Hz)
1080i (60Hz)
576p (50Hz)
EIA/CEA-770.2-C
EIA/CEA-770.3-C
ITU-R BT.1358
19
CONNECTING PERIPHERAL EQUIPMENT
Video Recorder : Playback
Connect the RF cable to the RF socket on your video recorder.
1
2
3
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
A
V5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
A
V4-480p/1080i-60Hz, 576p-50Hz
Connect another RF cable from the output of your video
recorder to the ANTENNA IN 75Ω socket on your TV.
G/Y
R/Pr
B/Pb
INPUT-A
V
1
MONITOR
OUT
INPUT-A
V
2
SUBWOOFER
Y
VIDEO
S-VIDEO
VIDEO
L
CABLE
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
Better playback quality can be obtained if you also connect the
Video,Audio Left and Right (only for stereo equipment) cables to
theVIDEO and AUDIO L (mono) and R inputs of
INPUT-AV 2.
1
Note : In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono-to-stereo adapter (not supplied)
for sound reproduction via the internal loudspeakers.
2
3
A/V OUT
The MONITOR OUT connectors can be used for daisy chaining
or recording programmes from your TV. See page 23.
RF OUT
RF IN
S-VHS-Video quality with an S-VHS video recorder is obtained by
connecting the S-VHS-Video cable with the S-VIDEO input instead
of connecting the video recorder to theVIDEO input. See the
handbook for the video recorder.
VIDEO RECORDER
IfYou Do Not Make theVideo and Audio
Connections in Step 3 Above :
Search for and store the test signal of the video recorder.
Unplug the RF cable from the RF socket of your video recorder.
1
Switch on your TV and put the video recorder on the test signal
or play a prerecorded tape. See the handbook for your video
recorder.
2
Search for the test signal of your video recorder in the same way
you searched for and stored the TV signals. See pages 9 and 10.
3
Store the test signal under programme number 0 or between 90
and 99.
4
Replace the RF cable in the RF socket of your video recorder
after you have stored the test signal.
5
20
CONNECTING PERIPHERAL EQUIPMENT
Video Recorder : Recording
To record S-VHS quality, connect an S-VHS peripheral directly to the
video recorder.
Recording aTV Programme
Select the channel number on your video recorder.
1
2
Set your video recorder to record.
See the handbook for your video recorder.
Switching channel numbers on yourTV does not disturb recording.
Recording a Programme onYourVideo Recorder Connected
to MONITOR OUT from Audio/Video Equipment Connected
to AV1,AV2, or to the Sockets on the Side of theTV (AV3)
Switch on the equipment.
1
2
Select the correct external source on your TV and on your video
recorder.
Set your video recorder to record.
3
You record what you are watching on the screen.
Do not switch channel numbers and do not switch off yourTV when
you are recording.
21
CONNECTING PERIPHERAL EQUIPMENT
Video Recorder and Other A/V Peripherals
Connect the RF cable to the RF socket on your A/V peripheral
equipment.
1
2
To obtain better picture quality, also connect theVideo and Audio
left and Audio right (only for stereo equipment) cables to the
VIDEO and AUDIO L (mono) and AUDIO R input of the INPUT-
AV 2 sockets.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
AV4-480p/1080i-60Hz, 576p-50Hz
G/Y
R/Pr
B/Pb
INPUT-AV
1
MONITOR
OUT
INPUT-AV
2
SUBWOOFER
Y
Note : In case of mono equipment, only the left loudspeaker
reproduces sound. Use a mono-to-stereo adapter (not supplied)
for sound reproduction via the internal loudspeakers.
VIDEO
S-VIDEO
VIDEO
L
CABLE
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
REAR OFTV
1
Connect the RF output of the A/V peripheral equipment to the RF
input on the video recorder.
3
4
When a video recorder is not connected to MONITOR OUT on
your TV, you can record a programme only from the aerial or
from the cable system.
2
5
4
A/V IN
A/V OUT
RF IN
RF OUT
RF IN
RF OUT
Only when a video recorder is connected to MONITOR OUT is it
possible to record a programme from other equipment connected
to the TV. See page 32.
3
A/V PERIPHERAL
VIDEO RECORDER
ConnectVideo and Audio left (mono) and Audio right cables from
the video recorder A/V inputs to theVIDEO and
AUDIO L (mono) and AUDIO R sockets of the MONITOR OUT
on your TV.
Connect from the RF output on the video recorder to the
ANTENNA IN 75Ω socket on your TV.
5
DVD Player
Note : Progressive-scan DVD players can be connected to the AV4 or
AV5 inputs only.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
AV4-480p/1080i-60Hz, 576p-50Hz
G/Y
R/Pr
B/Pb
INPUT-AV
1
MONITOR
OUT
INPUT-AV
2
SUBWOOFER
Y
VIDEO
S-VIDEO
VIDEO
L
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
Connect the cables of your DVD player with component video
output to theY-Pb-Pr INPUT-AV 1 sockets on your TV.
1
REAR OFTV
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
Connect the cables from theVideo and Audio (L and R) outputs
AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
on the DVD player to the INPUT-AV 1VIDEO and AUDIO L
(mono) and R inputs on your TV.
CENTER CHANNEL AMP INPUT
2
AV4-480p/1080i-60Hz, 576p-50Hz
G/Y
R/Pr
INPUT-AV
1
MONITOR
OUT
INPUT-AV
VIDEO
2
SUBWOOFER
Y
B/Pb
See the handbook for your DVD player.
S-VIDEO
-VIDEO
L
L
Pb
Pr
V
L
SYNC
H
AUDIO
AUDIO
1
AUDIO
AUDIO
2
R
R
Note :The names of the component video sockets may differ
depending on the DVD player or digital source equipment used.
For example, besidesYPbPr, you may see R-Y/B-Y/Y or CrCbY.
Although abbreviations and terms may vary, the letters B and R
stand for the blue and red color component signal connectors,
respectively.TheY indicates the luminance signal. If necessary, see
the handbook for the digital equipment for more information.
COMPONENTVIDEO
OUT
A/V OUT
DVD PLAYER
22
CONNECTING PERIPHERAL EQUIPMENT
S-Video Equipment
Note : Progressive-scan DVD players can be connected to the AV3 or
AV4 inputs only.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
AV4-480p/1080i-60Hz, 576p-50Hz
G/Y
Connect an S-VIDEO cable to the INPUT-AV 2 S-VIDEO input.
1
R/Pr
B/Pb
INPUT-A
V
1
MONITOR
OUT
INPUT-A
V
2
SUBWOOFER
Y
VIDEO
S-VIDEO
VIDEO
L
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
REAR OFTV
Connect the audio cables to the equipment’s AUDIO L (mono)
and AUDIO R sockets and to the INPUT-AV 2 AUDIO L (mono)
2
and AUDIO R sockets on your TV.
2
1
AUDIO OUT
S-VIDEO OUT
AV3 and AV4 Digital High-definition Inputs
DVD PLAYER
When you have digital equipment with 1080i or 480p signal output
(60Hz) or 576p signal output (50Hz), connect it to the AV4 or AV5 inputs
on your TV. Examples of such equipment are digital set-top boxes and
progressive-scan DVD players.
REAR OFTV
Connecting to AV3
Connect digital equipment with component video output (usually labeled
Y-Pb-Pr) or with RGB output (phono-type connectors) to the AV3 inputs
for video and audio left and right.Also connect to the H andV SYNC
inputs on the TV if required for your digital equipment.
Note :The AV3 sockets are compatible with some digital equipment hav-
ing RGB outputs with “sync on green” or RGB with “separate H andV
sync.” Output standards for digital equipment, however, may vary by man-
ufacturer. No industry standards have been established for HD television
RGB signal systems, timing, synchronization, and signal strengths. If the
digital equipment you want to connect to your TV offers both compo-
nent video and RGB outputs, component video is the suggested connec-
tion to use. See the handbook for the digital equipment.
Connecting to AV4
Connect digital equipment with RGB orY-Pb-Pr output to the AV4 inputs
for video and audio left and right.A DB15 cable or adapter cable with a
DB15 connector is required.
REAR OFTV
Note :The AV4 input cannot be used to connect a computer or any
otherVGA device.
Notes regarding connecting to either AV3 or AV4 :
• See the handbook for the high-definition equipment.
• If you notice scrolling images, wrong colors or no color, no picture or
even combinations of these on your screen, check to see if the con-
nections have been done properly.
23
CONNECTING PERIPHERAL EQUIPMENT
Camera and Camcorder
SIDE OFTV
S-VIDEO
G
1
Connect your camera or camcorder to sockets at the side of your TV.
or
VIDEO
L
1
TYPICAL
CAMCORDER
2
Connect the equipment to theVIDEO or S-VIDEO socket.
AUDIO
R
1
Note : S-VHS quality with an S-VHS camcorder is obtained by
connecting an S-VIDEO cable with the S-VIDEO socket instead of
making a connection to theVIDEO socket.
Connect the equipment to the AUDIO L socket for mono or
both the AUDIO L and R for stereo.
2
Headphone
SIDE OFTV
S-VIDEO
Insert the plug into the headphone socket ; at the right side of the
G
TV.
1
2
VIDEO
L
AUDIO
R
Press H on the remote control to switch off the internal loud-
speakers of the TV.
1
Notes :
• The headphone impedance must be between 8 and 4000 Ohms.
• The headphone socket has a 3.5 mm socket.
• In the SOUND menu, select HEADPHONE to adjust the headphone
volume and balance.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
AV4-480p/1080i-60Hz, 576p-50Hz
G/Y
R/Pr
B/Pb
INPUT-AV
1
MONITOR
OUT
INPUT-AV
2
SUBWOOFER
Y
VIDEO
S-VIDEO
VIDEO
L
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
Additional Audio Connections : External Hi-fi
REAR OFTV
If you would like to hear TV programmes through your audio hi-fi sys-
tem, your TV offers this capability.
Connect the audio cables to the AUDIO L and R input sockets of
your amplifier and to the AUDIO L (mono) and R
MONITOR OUT sockets of the TV.
1
1
Turn the TV and audio system on.
2
3
Control the volume of the hi-fi system at the hi-system’s amplifier.
HI-FI AMPLIFIER
Volume adjustments made to the TV do not affect the volume of
the hi-fi system.
24
CONNECTING PERIPHERAL EQUIPMENT
Additional Audio Connections : Surround Sound
Your TV has extra sockets that allow you to connect to an external
audio amplifier system and powered subwoofer.This connection will pro-
vide a surround-sound experience similar to a movie theatre or concert
hall.
ANTENNA IN 75Ω
AMP SWITCH
EXT
INT
A
V5-RGB, 480p/1080i-60Hz, 576p-50Hz
_
+
CENTER CHANNEL AMP INPUT
A
V4-480p/1080i-60Hz, 576p-50Hz
G/Y
R/Pr
B/Pb
INPUT-AV
1
MONITOR
OUT
INPUT-AV
2
SUBWOOFER
Y
VIDEO
S-VIDEO
VIDEO
L
S-VIDEO
L
L
Pb
Pr
V
L
L
L
SYNC
H
AUDIO
R
AUDIO
AUDIO
R
AUDIO
R
R
Connect speaker wires from the Center Speakers Output of the
REAR OFTV
surround-sound amplifier to the corresponding (+, –) CENTER
CHANNEL AMP INPUT sockets on the TV.
1
Connect audio cables from the AUDIO L and R MONITOR OUT
sockets of the TV to the AUDIO L and R inputs sockets on the
1
2
surround-sound amplifier.
2
4
Connect speaker wires from the surround-sound amplifier’s front
and surround-sound speaker sockets to the front and surround-
3
sound speakers.
3
3
POWERED
SUBWOOFER
AMPLIFIER
Connect an audio cable from the SUBWOOFER output of the TV
to the Low Level Input sockets on the powered subwoofer.
4
Adjust volume for the surround-sound amplifier and powered sub-
woofer at those pieces of equipment.
Note: The gray circle indicates the primary viewing area.
5
TV
(Center Speakers)
Front
Front
Speaker
Speaker
Powered
Subwoofer
Rear
Speaker
Rear
Speaker
25
SELECTING CONNECTED EQUIPMENT FOR VIEWING
Equipment Connected with an Aerial Cable Only
Source
Select
SOURCE
SELECT
Select the channel number under which you have stored the test signal
with the digit keys.
POWER
AMP
TV
CBL
SAT
VCR
DVD
Equipment Connected to the back or to the side
of theTV
Accessory
buttons
CD
HD
q
Q
l
PIXEL
PLUS
Press the Source select button to select the AV input for the device
DNR VCR Prog. EXIT
INFO+
i
you want to use:AV1,AV2,AV3,AV4, or side
1
Press the accessory buttons to control an accessory device with
the remote control. You can control aTV, CBL,VCR or Amplifier
by pressing the button once. A green indicator lights up.When
you press the button again for 1 second you can control a HD,
SAT, DVD, or CD. A red indicator lights up. To return toTV
mode press theTV button.
S
CC
2
MENU
Ï
OK
TV Channels
Enter the channel number of the TV channel you want to watch with the
digit keys.
26
CARE, CLEANING,AND TIPS
WARNING Concerning Stationary Images on theTV Screen :
Do not leave stationary or “letterbox” images on screen for extended periods of time.This can cause
uneven picture-tube aging.
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for extended periods of time or to display the same images on
screen too frequently, because subtle ghost images can be left on the picture tubes.Avoid showing the same stationary images
more than 15 percent of your total viewing in any one week. Sources of stationary images may be DVD discs, laser discs, video
games, CD-i discs, videotapes, digital television boxes, broadcast channels, cable channels, satellite channels, and others. Here are
some examples of stationary images (this is not an all-inclusive list; you may encounter others in your viewing) :
• DVD menus—listings of DVD disc content
• “Letterbox” black borders—black bars shown along the edges of the picture when a widescreen (16:9) movie is played on
TV
• Video-game images and scoreboards
• Television station logos—present a problem if they are bright and stationary; moving or low-contrast graphics are less likely
to cause uneven aging of the picture tube
• Stock-market tickers—presented at the bottom of the TV screen
• Shopping channel logos and pricing displays—bright and shown constantly or repeatedly in the same location on the TV
screen.
All picture tubes age with use, with their light output diminishing over time. But by maintaining normal use—mixing television pic-
ture types—you will create conditions for the tubes to age at an even rate.The result will be a TV picture that is evenly bright
over the entire screen.
PLACEMENT OF THE TV
• See page 4.
CLEANING
• To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to keep the TV clean.
• When cleaning the TV, take care not to scratch or damage the screen surface.Avoid wearing jewelry or using anything abrasive.
Do not use household cleaners.Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes
when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool, clear water and a mild soap or
detergent. Use a clean, dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the back cover of the set.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the
cabinet finish.
TIPS
• Do not leave your set on standby mode for a prolonged period of time. Switch the set off to allow it to be demagnetised.A
demagnetised set supports good picture quality.
• Do not shift or move the set around when it is switched on. Unevenness in colour in some parts of the screen may occur.
END-OF-LIFE DISPOSAL OF THE TV
Philips is making its products environmentally friendly.Your new TV contains materials that can be recycled and reused. Specialised
companies can dismantle your discarded TV at the end of its life, concentrating on the reusable materials and minimising the
amount of materials to be disposed. Please be sure to dispose of your old TV according to local regulations.
DISPOSAL OF EXHAUSTED BATTERIES
The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many countries exhausted batter-
ies may not be disposed of with your household waste. Please ensure you dispose of exhausted batteries according to local regu-
lations.
27
BEFORE CALLING SERVICE
What to do
Symptom
TV remote control does not
work
•
•
•
•
Check that the batteries are installed correctly.
Replace the batteries, if necessary.
Clean the remote control and the remote-sensor window on the TV.
Be no farther than 6 meters from the TV when using the remote control and aim the remote
toward the TV’s remote-sensor window.
•
If the remote still will not work, use the keys on the TV.
•
Check that the TV’s power cord is plugged into the mains socket. If there is still no power, discon-
nect the plug. Wait for 60 seconds and reinsert the plug and then switch on the TV again.
See if the outlet is controlled by a wall switch.
No power
No picture
•
•
If you are using an AC power strip, be sure the fuse on the power strip is not blown.
•
Check the antenna connection at the rear of the TV to see if it is properly connected to the TV
input terminal.
•
•
The broadcast station may be experiencing difficulty. Try another channel.
Adjust the contrast and brightness settings or select another picture setting with the Smart Picture
key on the remote control.
•
•
•
If using peripheral equipment through the A/V inputs, be sure it is properly connected.
Be sure you have selected the correct signal source for viewing.
If you are attempting to view a picture from a progressive-scan-capable DVD player connected to
the AV4 or AV5 sockets, be sure you have switched the DVD player to progressive-scan mode.
If you are using an HD receiver, be sure its output is set correctly (to HD or SD), based on the
connection to the TV you have made.
•
•
•
•
Increase the volume.
Good picture but no sound
Check that the TV is not muted; press the H key on the remote control.
When no signal is detected, the TV automatically switches off the sound. This is proper operation
and does not indicate a malfunction.
•
•
Check the transmission system’s sound settings on the set.
Adjust the contrast and brightness setting or select another picture setting with the Smart Picture
key on the remote control.
Check the transmission system’s colour settings on this set.
Good sound but poor colour or
no picture
•
•
Poor picture quality sometimes occurs when an S-VHS camera or camcorder has been connected
to the side panel (AV3) of the TV when another peripheral is connected to AV1 or AV2 simultane-
ously. In this case, switch off one of the other peripherals.
Poor picture
Snowy picture and noise
•
Check the antenna connection.
•
•
•
Switch off the TV by the mains power key. Wait for 20 minutes before switching on again.
Be sure you have made connections correctly.
If you have connected digital equipment to the AV4 or AV5 sockets, check the colour-space setting
on the equipment or TV and change the setting on either if necessary.
Check to be sure the TV is not placed too near speakers or magnetic objects.
Adjust the TV’s convergence.
Colour patch (unevenness)
•
•
•
This may be caused by electrical interference from appliances such as hair dryers or vacuum
cleaners or other sources such as neon lights. Turn off the appliance or move the TV.
Horizontal dotted lines
•
High-rise building or hills may be obstructing reception. Try using a highly directional antenna to
improve the picture.
Double images or “ghost” images
•
•
Converge the picture using IntelliSense or Manual Converge.
Switch the TV off immediately and consult a qualified service person.
One white line across the screen
•
•
This could be due to antenna siting or reflected signal.
Switch over to “MONO” by pressing the I-II key on the remote control.
NICAM sound distortion
(crackling noise)
If your problem is not solved, switch the TV off and then back on again once. Never attempt to repair a defective TV yourself. Check with
your dealer or call a TV technician.
28
INDEX
a
c
audio inputs, 18
AV3, 19, 23
AV4, 19, 23
m manual installation, 9
menu use, 8
p
picture menu, 11
pip, 17
automatic tuning of channels, 9
camcorder, 24
cleaning, 27
child lock, 13
converge. 15
r
s
remote control, 6-7
s-video, 18, 23
sound menu, 12
source menu, 15
d
f
demo, 16olby* virtual, 6
dual screen, see PIP
DVD, 22
t
troubleshooting (before calling service), 28
favorite channel list, 10
features menu, 13
freeze, 6
v
video recorder, 20
volume, 5
g
h
i
general menu, 14
give name, 10
y
ypbpr, 18
headphone, 33
HD inputs, 10
information on screen (i+ key), 6
intellisense, 5, 15
29
SPECIFICATIONS
ProductType
Rear-projection TV with HD Input
Connectivity
• Rear : MONITOR OUT—CVBS and audio L/R
INPUT-AV 1—CVBS, S-Video, and audio L/R
Component video input (CVI)—YPbPr and audio L/R
INPUT-AV 2—CVBS, S-Video, and audio L/R
AV 3—YPbPr (or RGB+HV)
accepting 480p/1080i-60Hz (EIA/CEA-770.2(&3)-C) and
576p-50Hz (ITU-R BT.1358); and audio L/R
AV 4—RGB (orYPbPr with adapter)
accepting 480p/1080i-60Hz (EIA/CEA-770.2(&3)-C) and
576p-50Hz (ITU-R BT.1358); and audio L/R
ANTENNA IN 75Ω—coaxial
CENTER CHANNEL AMP INPUT and AMP SWITCH
SUBWOOFER output
Picture
• Picture screen diameter :
55PP8620 : 140 cm (55 in.)
46PP8621 : 117 cm (46 in.)
• Visible screen size :
55PP8620 : 140 cm (55 in.)
46PP8621 : 117 cm (46 in.)
• 100Hz digital scan*
• Progressive scan*
• Digital comb filter
• Dynamic contrast
Side : CVBS, S-Video, and Audio L/R; stereo head
phone out (3.5 mm socket)
Reception
• Tuning system : PLL
• Colour transmission system (off-air) :
PAL B/G/I/D/K, SECAM B/G/D/K, NTSC M
• A/V connections : NTSC 3.58/4.43, PAL60
• Stereo sound transmissions systems (off-air) :
NICAM B/G/I/D/K, 2CS B/G/D/K
• Colour enhancements : green/blue stretch
• Digital colour transient improvement (CTI)
• Digital histogram
• Active Control™
– Auto Sharpness
– Auto Dynamic Noise Reduction
• Digital Noise Reduction (DNR)
• Tint control (three modes)
• Channel selections :VHF, UHF, S-channels, hyperband
Sound
Miscellaneous
• Dolby**Virtual Surround processing
• Incredible Surround™
• Speakers : 5 cm x 5 cm (2 in. x 2 in.) tweeter
5 cm x 12.7 cm (2 in. x 5 in.) woofer
• Smart Sound (four modes) :Theatre,Voice, Music, Personal
• Stereo : digital NICAM
• Ambient temperature : +5/+45ºC
• Mains : refer to the specification at the rear of the set
• Power consumption : refer to the specification at the rear of
the set
• Sound output : 2 x 15 W, 50Hz–10 kHz at 5% THD
(flat response) 8-ohm load
• Bass Boost
• Center channel input
• Subwoofer out
Ease of Use
• Smart Picture (five modes)
• Smart Sound (four modes)
• Dual-language onscreen display and menu control
• Sleeptimer and Timer
• Childlock
• 100 presets
• Favorite Programme List
• Remote control
These technical specifications are subject to change without notice.
*The options of Auto, Progressive, Digital Scan, or 100Hz can be selected in the TV’s onscreen Picture menu through the Digital Options item.
**Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
30
INTERNATIONAL GUARANTEE CONDITIONS
This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty
workmanship or materials.The guarantee covers both parts and labour.
Service under guarantee is only provided upon presentation of reasonable evidence (e.g., completed guarantee card or purchase
receipts) that the date of the claim is within the guarantee period.
The guarantee is not valid if the defect is due to accidental damage (including in transport), misuse or neglect and in case of alter-
ations or repair carried out by unauthorised persons.
The guarantee may not apply if the product requires modifications or adaptation to enable it to operate in any country other than
the country for which it was designed, manufactured, approved and/or authorised or if any damage results from these modifica-
tions.
Service (during and after guarantee) is available in all countries where this product is officially distributed by Philips. In countries
where Philips does not distribute the product, the local Philips Service organisation will also provide service, although there may
be a delay if the appropriate spare parts and technical manual are not readily available.
These statements do not affect your statutory rights as a consumer.
In the event of difficulty, please contact the Philips Information Centre in any country (see enclosed addresses).
CONDICIONES DE GARANTIAS INTERNATIONALES
Philips garantiza este producto durante 1 año, a partir de la fecha de adquisición, contra defectos debidos a una imper-
fecta fabricación o malos materiales. Esta garantía cubre tanto las piezas de recambio como la mano de obra.
Las reparaciónes que pudieran producírse durante el período de vigencia de la presente garantía se efectuarán solo si presenta una
razonable evidencia (por ejemplo, mediante la presente garantía, debidamente cumplimentada, o la factura de compra), de que la
fecha de la queja está dentro del período de garantía.
Esta garantía no tendrá validez si el defecto es debido a un deterioro accidental; un uso inadecuado o un mal trato y en el caso de
modificaciónes o reparaciónes efectuadas por personal no autorizado.
El servicio (durante y despues de la garantía) está disponible en todos los países donde el producto es ofícialmente distribuido por
Philips.
En países donde Philips no distribuya el producto, la organización local de Servicio Philips dará también el servicio necesario,
aunque puede producirse una demora si los adecuados recambios no están fácilmente disponibles.
En todo caso, el titular de la garantía tiene todos los derechos mínimos reconocidos por la Ley. En el caso de cualquier dificultad,
por favor dirijase al : Centro de Information al Consumidor (vease lista adjunta).
31
CONSUMER INFORMATION CENTRES
ITALY
Philips S.P.A.
WESTERN EUROPE
AUSTRIA
Servicio Consumatori Philips
Piazza IV Novembre, 3
I-20124 Milano
Phone 167 820026 (linea verde)
Fax (02) 67522660
Philips Kunden Information
Triesterstrasze 64
A-1100 Wien
Phone (01) 0660/6201
Fax (01) 60101 1312
LUXEMBURG
BELGIUM
Philips Luxemburg S.A.
19-21, rte. d’Arlon
L-8001 Strassen
Phone 44 38 38 1
Fax 45 39 88
Philips Consumer Products
Léon Grosjeanlaan 2
B-1140 Brussel
Phone (02) 702 03 03
Fax (02) 702 02 60
the NETHERLANDS
Philips Consumenten Belangen
Antwoordnummer 500
NL-5600VB Eindhoven
Phone 06 8406
GERMANY
Philips Infocenter
Consumer Electronics
Alexanderstraße 1
D-20099 Hamburg
Phone (0180) 535 6767
Fax (040) 2852 2310
Datex J*32400#
Fax (040) 2785187
NORWAY
Norsk A/S Philips
Philips Kundetjenste
Sandstuveien 70
Postboks 1
DENMARK
Philips Konsument Elektronik A/S
Philips Kundecenter
Prags Boulevard 80
DK-2300 København. S.
Phone 3288 3200
Manglerud
N-0680 Oslo 6
Phone (022) 748250
Fax (022) 748511
Fax 3288 3908
PORTUGAL
Centro de Informação aos
Consumidores
Estrada da Outurela 118
P-2795 Carnaxide
Lisboa
Phone (01) 416 30 63 / 416 69 61
Fax (01) 416 30 73
FINLAND
Philipsin Asiakaspalvelu
Sinikalliontie 3
P.O. Box 75
SF-02630 Espoo
Phone (90) 61580 230
Fax (90) 61580 910
FRANCE
SPAIN
Service Consommateurs Philips
Rue desVieillesVignes
Croissy Beaubourg
B.P. 49
F-77423 Marne laVallée, Cedex 2
Phone (01) 64805454
Fax (01) 64613348
Philips Servicio Atención al Cliente
Bernardino Obregón, 26
E-28012 Madrid
Phone (91) 5300777
Fax (91) 4678925
SWEDEN
Philips Kundtjänst
Kottbygatan 7.Kista
S-16485 Stockholm
Phone (08) 632 2250
Fax (08) 632 2771
GREECE
Philips S.A. Hellenique
25th March Street 15
P.O. Box 3153
G-10210 Athens
Phone (01) 4894301 880
Fax (01) 4894344
SWITZERLAND
Philips Info Centre
c/o SERLOG Servizio + Logistica S.A.
Fegistrasze 5
CH-8957 Spreitenbach
Phone (056) 4177270
Fax (056) 4177575
IRELAND
Philips Electronics Ireland Ltd
Newstead
Clonskeagh
Dublin 14
Phone (01) 7640000
Fax (01) 7640175
32
CONSUMER INFORMATION CENTRES
UNITED KINGDOM
Philips Consumer Helpdesk
P.O. Box 298
BRASIL
Philips da Amazona Indústria
Electrônica Ltda.
Rua Jacerú, 151-Brooklin
04705-000
Sao Paulo-SP.
Phone 800123123
Fax (011- 5315973
420 London Road
Croydon-Surrey CR9 3QR
Phone (0181) 665 6350
Fax (0181) 6894312
EASTERN EUROPE
CHILI
CZECH REPUBLIC
Philips Service
V Mezihorí 2
180 00 Prage
Phone (02) 6831581
Fax (02) 66310852
Philips Chilena S.A.
Avenida Santa Maria 0760
P.O. Box 2687
Santiago de Chile
Phone (02) 730 2000
Fax (02)777 6730
HUNGARY
COLOMBIA
Philips Markaszerviz
Kinizsi U 30-36
Budapest 1092
Phone (01) 2164428
Fax (01) 2187885
Industrias Philips de Colombia
S.A. Division de Servicio
Calle 13, No 51-39
Apartado 4282, Bogota
Phone (01) 2600600
9800 18971 (toll free)
Fax (01) 2616308
POLAND
Philips Polska CE
UL. Marszalkowska 45/49
00-648 Warszawa
Phone (02) 6286070
Fax (02) 6288228
MEXICO
Consumer Information Centre
Norte 45 No. 669
Col. IndustrialVallejo
C.P. 02300-Mexico, D.F.
Phone (05) 3687788/9180050462
Fax (05) 7284272
RUSSIA
Philips Representation Office
UI. Usacheva 35A
119048 Moscow
Phone (095) 247 9125
Fax (095) 247 9134
PARAGUAY
Philips del Paraguya S.A.
Avenida Artigas 1519
Casilla de Correos 605
Asuncion
Phone (021) 211666
Fax (021) 213007
TURKEY
Türk Philips Ticaret A.S.
Talatpasa Caddesi No 5
80640-Gültepe/Istanbul
Phone (0800) 211 40 36
Fax (0212) 281 18 09
PERU
Philips Peruana S.A.
Customer Desk
Comandante Espinar 719
Casilla 1841
LATIN AMERICA
ANTILLES
Philips Antillana N.V.
Kaminda A.J.E. Kusters 4
Zeelandia
Lima. 18
Phone (014) 479783
Fax (014) 468949
P.O. Box 3523-3051
Willemstad, Curacao
Phone (09) 612799
Fax (09) 612772
URUGUAY
Ind. Philips del Uruguay S.A.
Avenida Uruguay 1287
Customer Help Desk
11100 Montevideo
Phone (02) 923392
Fax (02) 920752
ARGENTINA
Philips Argentina S.A.
Centro de Información al Usarío
Vedia 3892
1430-Buenos Aires
Phone (01) 5442047
Fax (01) 5452928
33
CONSUMER INFORMATION CENTRES
VENEZUELA
Guangzhou 510080
Phone (020) 7766990
Fax (020) 7766990
IndustriasVenezolanas Philips S.A.
Apartado Postal 1167
Caracas 1010-A
Philips Authorized Service Centre
Bejing Jing Pu Elec. Service Station
6/F Guo Hu Department Store
Xan Wu Men West Street
Bejing 100053
Phone (02) 2377575
Fax (02) 2376420
NORTH AMERICA
CANADA
Phone (01) 3021589
Fax (01) 3021589
Consumer Service Division
4977 Levy Street
Ville St. Laurent
Quebec H4R2N9
Phone (514) 9560120
Fax (514) 9560828
Philips Authorized Service Centre
148 Fu Jian Road M.
Shanghai 200001
Phone (021) 3281005/38275
Fax (021) 3281005
USA
Philips Consumer Electronics
P.O. Box 520890
Miami, FL 33152
HONG KONG
Philips Electronics Hong Kong Limited
Consumer Service
Phone : (402) 536-4171
10/F., Flat A, Park Sun Building
103-107 WoYi Hop Road
Kwai Chung, N.T.
PACIFIC
AUSTRALIA
Phone 2619-9663
Philips Consumer Service
Customer Information Centre
3 Figtree Drive
Homebush Bay NSW 2140
Phone (02) 131124
Fax (02) 7467970
Fax 2485-3574
INDIA
Philips India
Consumer Relation Centre
Bandbox House
254-D Dr.A. Besant Road
Worli
Bombay 400 025
Phone (022) 4926611
Fax (022) 4941698
NEW ZEALAND
Philips New Zealand Ltd.
Consumer Help Desk
2 Wagener Place
Mt.Albert
P.O. Box 1041
Auckland
Phone 0800 658 224 (toll free)
Fax (09) 849 7858
Consumer Relation Centre
7 Justice Chandra Madhab Road
Calcutta 700 020
Phone (033) 747333
Fax (033) 4753839
INDONESIA
ASIA
P.T. Philips Development Corporation
Consumer Electronics Service
Philips House 5th floor,
JI. HR. Rasuna Said Kav. 3-4
Jakarta 12950
BANGLADESH
Philips Service Centre
100 Kazi Nazrul Islam
Avenue Kawran Bazar C/A
Dhaka-1215
Phone (02) 812909
Fax (02) 813062
Phone (021) 5201122
Fax (021) 5205190
CHINA
Philips Service Logistic Centre
385 Hong Cao Road
Shanghai 200233
Phone (021) 4726839
Fax (021) 4726843
Philips Authorized Service Centre
801 Dong Feng Road East
34
CONSUMER INFORMATION CENTRES
JAPAN
TAIWAN
Philips Consumer Electronics
1-11-9, Ebisuminami
Shibuya-Ku
Philips Taiwan Ltd.
Consumer Products Division
4F-1, 5, Lane 768, Pateh Rd, Sec 4
P.O. Box 22978
Tokyo 150
Phone (03) 3719 2235
Fax (03) 3715 9992
Taipei
Phone (02) 7882856
Fax (02) 7882851
THAILAND
Philips Electronics (Thailand) Ltd.
Philips Service Centre
209/2 Sanpavut Road
Bangna
Bangkok 10260
Phone (02) 3980141/3980790
Fax (02) 3983319
KOREA
Philips Korea Ltd. - Philips House
C.P.O. Box 3680
260-199
Itaewon-Dong
Yongsan-Ku
Seoul 140-202
Phone (02) 5961195/1196
(02) 5967632/76325
Fax (02) 5959688
AFRICA
MALAYSIA
Philips Malaysia Sdn. Berhad
Service Dept.
No.51, sect. 13 Jalan University
4620 Petaling Jaya, Selangor
P.O. Box 12163
50768 Kuala Lumpur
Phone (03) 7562144
Fax (03) 7560761
MOROCCO
Philips Electronique Maroc.
304, BD MohamedV.
Casablanca
Phone (02) 302992
Fax (02) 303446
SOUTH AFRICA
South Africa Philips
S.V. Div. 195 Main R.D.
Martindale
Johannesburg
P.O. Box 58088
Newville 2114
Phone (011) 4705911
Fax (011) 4705250
PAKISTAN
Philips Electr. Ind. of Pakistan Ltd.
Service Centre
Mubarak Manzil
39 Garden Road
Karachi-3
Phone (021) 7737411 16
Fax (021) 7726504
MIDDLE EAST
Philips Consumer Service Centre
168-F Adamjee Road
Rawalpindi Cantt.
Phone (051) 580902 3
Fax (051) 584944
Philips Export B.V.
P.O. Box 17078
Jebel Ali
Dubai
United Arab Emirates
Phone (04) 313377
Fax (04) 836128
PHILIPPINES
Philips Electronics and Lighting Inc.
106Valero St. Salcedo-Village
Makati, Metro Manilla
Phone (02) 8100161
Fax (02) 8173474
SINGAPORE
Philips Singapore Private Ltd.
Consumer Service Dept.
Lorong 1,Toa Payoh
P.O. Box 340
Singapore 319762
Phone 3502000
Fax 2508037
35
36
|