Rwegwistewr yo.uprhproildiupctsan.dcgoetmsup/pworteatlcome
DVP3320
EN User manual
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢀꢆꢃ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢂꢋ
8 Additional information
Update software
Care
25
25
25
Contents
1 Important
4
4
4
9 Speciꢀcation
10 Troubleshooting
11 Glossary
26
28
29
Safety and important notice
Trademark notice
2 Your DVD player
Feature highlights
6
6
6
Product overview
3 Connect
8
8
Connect video cables
Connect audio cables
Route audio to other devices
Connect USB device
Connect to power outlet
9
9
9
10
4 Get started
11
11
11
11
12
12
Prepare the remote control
Navigate the menu
Find the correct viewing channel
Select menu display language
Turn on Progressive Scan
5 Play
14
14
14
16
17
18
Play from disc
Play video
Play music
Play photo
Play from USB device
6 Adjust settings
General setup
Audio setup
20
20
20
21
22
Video setup
Preferences
7 Advanced features
24
24
Create MP3 ꢀles
EN
3
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢀ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢌ
Recycle notice
1 Important
Safety and important notice
Warning
This electronic equipment contains a large
number of materials that can be recycled
or reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
• Risk of overheating! Never install the DVD
player in a conꢀned space. Always leave a
space of at least 4 inches around the DVD
player for ventilation. Ensure curtains or other
objects never cover the ventilation slots on the
DVD player.
• Never place the DVD player, remote control
or batteries near naked ꢁames or other heat
sources, including direct sunlight.
• Only use this DVD player indoors. Keep this
DVD player away from water, moisture and
liquid-ꢀlled objects.
Copyright notice
• Never place this DVD player on other
electrical equipment.
• Keep away from this DVD player during
lightning storms.
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorised
by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorised by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
• Be sure that you have full access to the power
cord for easy disconnection of the DVD player
from the power supply.
• Visible and invisible laser radiation when open.
Avoid exposure to beam.
About Progressive Scan
Consumers should note that not all high
deꢀnition television sets are fully compatible
with this product and may cause artifacts to
be displayed in the picture. In case of 525
or 625 progressive scan picture problems,
it is recommended that the user switch the
connection to the ‘standard deꢀnition’ output.
If there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
Trademark notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
4
EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢌ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢌ
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
EN
5
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢍ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢍ
Product overview
2 Your DVD
player
Main unit
Congratulations on your purchase, and
welcome to Philips!To fully beneꢀt from the
support that Philips offers, register your product
This DVD player brings audio and video
to life. Just plays practically any disc format,
including the digital photos with absolutely no
compromise to picture quality.
6
a
(Standby-On)
•
Turns on the DVD player or switches
to standby mode.
Feature highlights
b Disc compartment
c Display panel
Screen Fit
View the movie in full screen display on any
TV.
d
(Open/Close)
•
Opens or closes the disc
compartment.
Progressive scan component video
Pushes the limits of standard resolution and
provides a more ꢀlm-like image display that
is more pleasing for viewing DVDs on a TV
display.
e
f
(Play/Pause)
•
•
Starts, pauses or resumes disc play.
(USB) jack
Connect a USB ꢁash drive.
Remote control
Region codes
1
You can play discs with the following region
codes.
2
18
3
4
17
DVD region code
Countries
16
5
Latin America
6
7
15
14
8
9
13
12
10
11
a
(Standby-On)
Turns on the DVD player or switches
to standby mode.
•
6
EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢊ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢍ
b
(Open/Close)
l REPEAT A-B
Marks the section for repeat play, or
turns off repeat mode.
•
Opens or closes the disc
compartment.
•
c DISC MENU
m AUDIO/CREATE MP3
•
•
•
Accesses or exits the disc menu.
•
Selects an audio language or channel
Switches to disc mode.
For VCD and SVCD, turns PBC
(playback control) on or off in PBC
mode.
on a disc.
Access the menu of creating MP3
ꢀles.
•
n
o
p
(Stop)
d
(Navigation buttons)
•
•
Stops disc play.
•
•
Navigates through the menus.
Searches fast-forward (right) or fast-
backward (left). Press repeatedly to
change the search speed.
(Play/Pause)
Starts, pauses or resumes disc play.
INFO
•
Searches slow-forward (up) or slow-
backward (down). Press repeatedly
to change the search speed.
•
•
For discs, displays information about
the current status or the disc.
For slideshows, displays a thumbnail
view of photo ꢀles.
e
f
g
BACK
•
•
•
Returns to the previous menu.
For DVD, navigates to title menu.
For VCD version 2.0 or SVCD with
PBC turned on, returns to the menu.
q OK
•
Conꢀrms an entry or selection.
r SETUP
Accesses or exits the setup menu.
•
/
(Previous/Next)
Skips to the previous or next title,
chapter, or track.
Press and hold for fast-backward or
fast-forward search.
•
•
(USB)
•
Switches to USB mode and displays
the content.
h Numeric buttons
•
Selects an item to play.
i SUBTITLE
•
Selects the subtitle language on a
disc.
j
ZOOM
•
•
Fits the picture format to the TV
screen.
Zooms in or out of the picture.
k REPEAT
Toggles between various repeat
modes.
•
EN
7
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢉ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢊ
Note
3 Connect
• You must connect this DVD player directly to
a TV.
Make the following connections to use your
DVD player.
Option 1: Connect to component
video jacks
Basic connections:
•
•
Video
Audio
Optional connections:
Route audio to other devices:
Pb
•
Pr
Pb
Y
COMPONENT
VIDEO IN
•
•
Digital ampliꢀer/receiver
Analog stereo system
Y
Pr
COMPONENT VIDEO OUT
Note
• Refer to the type plate at the back or bottom
of the product for identiꢀcation and supply
ratings.
1 Connect the component video cables
(not supplied) to the Y Pb Pr jacks on this
DVD player and the component video
input jacks on the TV.
• Before you make or change any connections,
ensure that all the devices are disconnected
from the power outlet.
•
If a progressive scan TV is used, you
may turn on the progressive scan
mode.
Tip
Tip
• Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
• The component video input jacks on the TV
may be labeled as Y Pb/Cb Pr/Cr or YUV.
• This type of connection provides good picture
quality.
Option 2 : Connect to video (CVBS)
jack
Connect video cables
Connect this DVD player to TV to view disc
play. Select the best video connection that the
TV can support.
VIDEO IN
•
Option 1: Connect to component video
jacks (for a standard TV or Progressive
Scan TV).
Option 2: Connect to video (CVBS) jack
(for a standard TV).
•
1 Connect a composite video cable
(supplied) to the TV OUT jack on this
8
EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢋ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢉ
DVD player and the video input jack on
the TV.
1 Connect a coaxial cable (not supplied)
to the COAXIAL/DIGITAL OUT jack
on this DVD player and the COAXIAL/
DIGITAL input jack on the device.
Tip
• The video input jack on the TV may be labeled
as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
Tip
• This type of connection provides standard
picture quality.
• You can optimize the audio output (see
chapter ‘Adjust settings’ - [Audio Setup] >
[Digital Output]) for details.
Connect to analog stereo system
Connect audio cables
Connect the audio from this DVD player to
the TV to allow sound output through the TV.
AUDIO IN
AUDIO IN
1 Connect the audio cables (supplied) to
the AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
1 Connect the audio cables (supplied) to
the AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
TV.
Connect USB device
Route audio to other devices
Route the audio from this DVD player to other
devices to enhance audio play.
Connect to digital ampliꢀer/receiver
1 Connect the USB ꢁash drive to the
(USB) jack on this DVD player.
DIGITAL IN
Note
DIGITAL
OUT
• This DVD player can only play or view MP3,
WMA or JPEG ꢀles that are stored on such
devices.
COAXIAL
• Press
ꢀles.
to access the content and play the
EN
9
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢇ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢉ
Connect to power outlet
Warning
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the DVD player.
1 Connect the power cord to the power
outlet.
» The DVD player is ready to be set up
for use.
10 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢂ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢋ
Navigate the menu
4 Get started
Prepare the remote control
1 Point the remote control directly at the
remote sensor on this DVD player and
select the desired function.
2 Use the following buttons on the remote
control to navigate through the on-screen
menus.
1 Push to open the battery compartment
cover.
2 Insert 2 AAA batteries with correct
Button
Action
polarity (+/-) as indicated.
Moves up or down.
Moves left or right.
Conꢀrms a selection.
Enters numbers
3 Close the cover.
OK
Caution
• Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
• Do not mix batteries (old and new or carbon
and alkaline, etc.).
• Batteries contain chemical substances, they
should be disposed of properly.
Find the correct viewing
channel
1 Press to turn on the DVD player.
2 Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
•
Press
SOURCE button repeatedly
on the remote control of your TV.
EN 11
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢃ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢇ
Turn on Progressive Scan
Tip
• The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc.. See the
TV user manual on how to select the correct
input on your TV.
Connect a progressive scanTV with component
video jacks (see chapter ‘Connect video cables
- Option 1: Connect to component video jacks’
for details).
• If the audio output of this DVD player is
routed to other audio device (such as audio
system or receiver), turn on the audio device
to the appropriate audio input channel. Refer
to the device user manual for details.
Video Setup
TV System
Interlaced
P-Scan
TV Display
Picture Setting
Component Video
Select menu display language
Closed Caption
General Setup
OSD Language
Auto Standby
English
Español
Português
1 Turn on the TV to the correct viewing
channel for this DVD player.
2 Press SETUP.
3 Press to select [Video Setup].
4 Select [Component Video] > [P-Scan],
then press OK.
» A warning message is displayed.
1 Press SETUP.
5 To proceed, select [Yes] and press OK.
» [General Setup] menu is displayed.
» The progressive setup is complete.
2 Select [OSD language], then press
.
•
The language options are different
Note
depending on your country or
region. It may not correspond to the
illustration shown here.
• If a blank/distorted screen is displayed, wait for
15 seconds for the auto recover.
• If no picture displayed, turn off the progressive
scan mode as follows: 1) Press to open the
disc compartment. 2) Press the Numeric
button ‘1’.
3 Press
to select a language, then press
OK.
Tip
6 Press SETUP to exit the menu.
• You can set the default language for DVD
audio and disc menu, see chapter ‘Adjust
settings’ - [Preferences] for details.
7 You can now turn on the progressive
scan mode on the TV (see the TV user
manual).
12 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢁ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢃꢇ
Note
• During play, when progressive scan mode is on
for both this DVD player and the TV, distorted
picture may display. Turn off the progressive
scan feature on both this DVD player and the
TV.
EN 13
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢀ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢂ
Play video
5 Play
Note
Play from disc
• For video disc, play always resumes from the
point where it was last stopped. To start play
from the beginning, press while the message
is displayed.
Note
• DVDs and DVD players are designed with
regional restrictions. Ensure that the DVD
video you play is for the same region zone as
your player (indicated on its back).
Control a title
1 Play a title.
• The DVD player can support play of the
following ꢀle formats: MP3/WMA/JPEG.
• To play DVD-R, DVD+R or DVD-RW, the disc
must be ꢀnalized.
2 Use the remote control to control the
title.
Button
Action
Starts, pauses or resumes disc
play.
Play a disc
Stops disc play.
Caution
Skips to the next title or chapter.
Skips to the beginning of the
current title or chapter. Press
twice to jump to the previous
title or chapter.
Searches fast-forward (right)
or fast-backward (left). Press
repeatedly to change the search
speed.
Searches slow-forward (up) or
slow-backward (down). Press
repeatedly to change the search
speed.
For VCD/SVCD, slow-backward
search is not available.
• Never place any objects other than discs into
the disc compartment.
1 Press to open the disc compartment.
2 Insert a disc with its label facing up.
,
•
For double-sided discs, load the
playing side facing up.
3 Press to close the disc compartment.
•
To view disc play, turn on the TV to
the correct viewing channel for this
DVD player.
,
•
If play does not start automatically,
press
.
4 To stop disc play, press
.
Tip
Change video play
• If the password entry menu is displayed, you
have to enter the password before it can be
played.
1 Play a title.
• If you pause or stop a disc for about 5 minutes,
the screen saver activates. To deactivate the
screen saver, press DISC MENU.
2 Use the remote control to change the
video play.
• After you pause or stop a disc and no buttons
are pressed within 15 minutes, this DVD player
automatically switches to standby mode.
14 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢌ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢂ
Access DVD menu
Button
Action
AUDIO/
CREATE
MP3
Selects an audio language or
channel on a disc.
Only applicable to discs with
multiple audio language or
channel.
SUBTITLE Selects the subtitle language on
a disc.
Only applicable to discs with
multiple subtitle language.
Selects or turns off repeat
mode.
Repeat options vary depending
on the disc type.
For VCD/SVCD, repeat play is
only possible if the PBC mode is
turned off.
1 Press DISC MENU to access disc main
menu.
REPEAT
2 Select a play option, then press OK.
•
•
In some menus, press the Numeric
buttons to input your selection.
To return to the title menu during
play, press
BACK.
ZOOM Fits the picture format to the
(Screen Fit) TV screen.
AccessVCD menu
The PBC (Playback Control) for VCD/SVCD
is turned on by default in the factory. When
you load in a VCD/SVCD, the contents menu
is displayed.
Press repeatedly until the image
is scaled to ꢀt to the TV screen.
ZOOM Toggles between screen aspect
ratio and different zoom factor.
To pan through the zoomed
image, press the Navigation
buttons.
1 Press Numeric buttons to select a play
option, then press OK to start play.
•
If PBC is off, it skips the menu and
starts play from the ꢀrst track.
To return to the menu during play,
INFO
Displays the current status or
disc information.
•
press
BACK (only possible if the
You can change the video
play options here without
interrupting disc play.
PBC mode is on).
Tip
Note
• Press DISC MENU to turn on or off the PBC
mode.
• Some operations may not work with some
discs. See the information accompanying the
disc for details.
Quick skip play to a speciꢀc time
1 During play, press INFO.
» The disc status menu is displayed.
2 Select the current elapsed playing time,
then press
.
•
•
•
•
[TT Time] (title time)
[Ch Time] (chapter time)
[Disc Time] (disc time)
[Track Time] (track time)
EN 15
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢍ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢃ
Repeat play a speciꢀc section
3 Press the Numeric buttons to enter the
time where you want to skip to, then
press OK
1 During play, press REPEAT A-B at where
you want to set the starting point.
2 Press REPEAT A-B again to set the
Display play time
ending point.
» Repeat play starts.
1 During play, press INFO.
» The disc status menu is displayed.
3 To cancel repeat play, press REPEAT A-B
again.
2 Select [Time Disp.], then press
.
» The display options are different
Note
depending on the disc type.
• The marked section for repeat play is only
possible within a track/title.
Option
Action
[Title Elapsed]
/ [Chapter
Elapsed]
[Title Remain]
/ [Chapter
Remain]
[Total Elapsed] / Displays VCD/SVCD disc
[Single Elapsed] or track elasped play time.
[Total Remain] / Displays VCD/SVCD disc
[Single Remain] or track remaining play
time.
Displays DVD title or
chapter elasped play time.
Play music
Displays DVD title or
chapter remaining play
time.
Note
• For some commercial audio disc, play may
resume from the point where it was last
stopped. To start play from ꢀrst track, press
.
Control a track
3 Select an option, then press OK.
1 Play a track.
2 Use the remote control to control the
View video play from different camera
angles
track.
1 During play, press INFO.
» The disc status menu is displayed.
2 Select [Angle], then press
.
3 Press the Numeric buttons to change the
angle.
» Play changes to the selected angle.
Note
• Applicable only to discs contain multi-angle
scenes.
16 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢊ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢁ
Button
Action
Starts, pauses or
resumes disc play.
Note
• For CDs recorded in multiple sessions, only
the ꢀrst session is played.
Stops disc play.
• This DVD player does not support MP3PRO
audio format.
Skips to the next track.
Skips to the beginning of
the current track. Press
twice to jump to the
previous track.
• If any special characters are present in the MP3
track name (ID3) or album name, it may not
display correctly on the screen because these
characters are not supported.
• Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
this DVD player.
Selects an item to play.
• Folders/ꢀles exceed the supported limit of this
DVD player are not displayed or played.
,
Searches fast-forward
(right) or fast-backward
(left). Press repeatedly
to change the search
speed.
Play photo
Play photo as slideshow
This DVD player can play JPEG photos (ꢀles
with .jpeg or .jpg extensions).
To change search
speed, press this button
repeatedly.
REPEAT
Toggle through various
repeat play mode; or
turn off repeat mode.
Repeat options vary
depending on the disc
type.
Play MP3/WMA music
MP3/WMA is a type of highly compressed
audio ꢀle (ꢀles with .mp3, .wma extensions).
1 Insert a disc that contains the MP3/WMA
1 Insert a disc that contains the JPEG
photos.
music.
» A contents menu is displayed.
» Slideshow begins (for Kodak disc) or
a contents menu (for JPEG disc) is
displayed.
2 Play starts.
•
To select another track, press
,
then press OK.
2 Select the folder/album you want to play.
3 To return to the main menu, press until
the root menu is selected, then press
OK.
•
•
•
To preview the photos in the folder/
album, press INFO.
To go to previous or next screen
•
To select a folder, press
press OK.
, then
display, press
/
.
To select a photo, press the
Navigation buttons.
EN 17
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢉ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢁ
•
To display the selected photo only,
2 Navigate to the photo folder/album and
press OK to start slideshow play.
press OK.
3 Press OK to start slideshow play.
» Slideshow begins and continues till the
end of the photo folder or album.
•
To return to the menu, press
BACK.
» Audio continues to play till the end of
the disc.
Note
•
To return to the menu, press
BACK.
• You may require longer time to display the disc
content on the TV due to the large number of
songs/photos compiled onto one disc.
•
•
To stop slideshow play, press
.
To stop music play, press again.
• If the JPEG photo is not recorded with an ‘exif’
type ꢀle, the actual thumbnail picture is not be
shown on the display. It is replaced by a ‘blue
mountain’ thumbnail picture.
• This DVD player can only display digital
camera pictures according to the JPEG-EXIF
format, typically used by almost all digital
cameras. It cannot display Motion JPEG and
pictures in formats other than JPEG, or sound
clips associated with pictures.
Play from USB device
• Folders/ꢀles that exceed the supported limit of
this DVD player are not displayed or played.
Control photo play
1 Play photo slideshow.
2 Use the remote control to control the
This DVD player plays or views MP3, WMA or
JPEG ꢀles that are stored on USB device.
photo.
Button
Action
Rotates the photo anti-
clockwise.
Rotates the photo clockwise.
Rotates the picture 180°.
Rotates the picture 180°.
Zooms in or out of the
picture.
Play pause in zoom mode.
Stops play.
1 Connect a USB ꢁash drive to the
(USB) jack on this DVD player.
2 Press
.
» A contents menu is displayed.
» Play starts.
3 Select a ꢀle to play if play does not start
ZOOM
automatically.
•
For more information, see chapters
‘Play music, Play photo, Play video’
for details.
4 To stop play, press or remove the USB
device.
Play musical slideshow
•
To switch to the disc mode, press
Play MP3 music ꢀles and JPEG photo ꢀles
simultaneously to create musical slideshow.
The MP3 and JPEG ꢀles must be stored on the
same disc.
or DISC MENU.
1 Play MP3 music.
18 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢋ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢌ
Tip
• If the device does not ꢀt into the USB jack,
connect it through a USB extension cable.
• Digital cameras that require additional
programme installation when connected to a
PC are not supported.
EN 19
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢃꢇ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢍ
4 Select a setting, then press OK.
6 Adjust settings
•
•
To return to the previous menu,
press
.
To exit the menu, press SETUP.
This section describes the various setting
options of this DVD player.
[OSD language]
Selects the default on-screen menu language.
Symbol
Option
[General Setup]
[Auto standby]
Turns off or on automatic standby switching
mode. It is an energy saving feature.
[Audio Setup]
[Video Setup]
[Preferences]
•
•
[On] – Switches to standby after 15
minutes of inactivity (for example, in
pause or stop mode).
[Off] – Disables auto standby mode.
Audio setup
Audio Setup
Note
Digital Output
Volume
• If the setup option is grayed out, it means the
setting cannot be changed at the current state.
Down Sampling
Night Mode
General setup
General Setup
1 Press SETUP.
» [General Setup] menu is displayed.
OSD Language
Auto Standby
2 Press to select [Audio Setup], then
press
.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•
•
To return to the previous menu,
press
.
To exit the menu, press SETUP.
1
Press SETUP.
» [General Setup] menu is displayed.
Note
• See the explanations of the above options in
the following pages.
2 Press
.
3 Select an option, then press OK.
20 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢂ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢍ
Video setup
[Digital Output]
Selects the setting based on the digital
ampliꢀer/receiver that is connected through
the digital jack.
Video Setup
TV System
•
•
[Off] - Disables digital output.
[PCM] - Downmixs to PCM format (2
channel).
[All] - Supports multi-channel audio
formats.
TV Display
Picture Setting
Component Video
Closed Caption
•
[Volume]
Sets the default volume level when you play
a disc.
1 Press SETUP.
» [General Setup] menu is displayed.
1. Press OK.
2 Press to select [Video Setup], then
2. Press
to set the volume.
press
.
3. Press OK to conꢀrm and exit.
3 Select an option, then press OK.
4 Select a setting, then press OK.
•
•
To return to the previous menu,
[Down Sampling]
Selects the output sampling rate for better
sound quality.
press
.
To exit the menu, press SETUP.
•
[On] - for discs recorded at sampling rate
of 48 kHz.
[Off] - for discs recorded at sampling rate
of 96 kHz.
Note
•
• See the explanations of the above options in
the following pages.
[Night Mode]
[TV System]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
•
[On] – Enjoys quiet viewing at night.
[Off] – Enjoys surround sound with a full
dynamic range.
•
•
•
[NTSC] – For NTSC-system TV.
[PAL] – For PAL-system TV.
[Multi]– For TV that is compatible with
both PAL and NTSC.
Note
Conꢀrm the setting by pressing to select
[Yes], then press OK.
• Applicable only to Dolby Digital encoded
DVD.
[TV Display]
Selects one of the following display formats:
EN 21
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢃ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢊ
Closed Caption information included and
the TV supports this feature.
[Off] – disables closed caption.
•
•
•
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9] – For wide-screen TV: display ratio
16:9.
Preferences
Note
•
• Stop disc play before you can access to
[Preferences].
[Picture Setting]
Selects a predeꢀned set of picture color
settings or customize the personal setting.
Preferences
Audio
•
•
•
•
[Standard] – Original color setting.
[Bright] – Vibrant color setting.
Subtitle
Disc Menu
[Soft] – Warm color setting.
Parental Control
Password
[Personal] – Customizes the color setting.
Set the level of brightness, contrast, tint
and color saturation, then press OK.
Version Info
Default
[Component Video]
Selects the video output that matches the
video connection between this DVD player
and the TV.
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Preferences], then
•
[Interlaced] – for component video (Y
Pb Pr) connection.
press
.
•
[P-Scan] - for component video (Y Pb Pr)
connection with progressive scan mode.
3 Select an option, then press OK.
4 Select a setting, then press OK.
Conꢀrm the setting by pressing to select
[Yes], then press OK.
•
•
To return to the previous menu,
press
.
To exit the menu, press SETUP.
Tip
• There is more detailed description available.
See chapter ‘Get started - Turn on Progressive
Scan’ for details.
Note
• See the explanations of the above options in
the following pages.
[Closed Caption]
[Audio]
Turns off or on display captions.
Selects the default audio language for disc play.
•
[On] – shows the sound effects in
subtitles. Applicable only to discs with
[Subtitle]
22 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢁ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢉ
Selects the default subtitle language for disc
play.
Preferences
Change password
Old Password
[Disc Menu]
Selects the disc menu language.
New Password
Note
Confirm new password
• If the language you have set is not available on
the disc, the disc uses its own default language.
• For some DVDs, the subtitle/audio language
can only change from the disc menu.
OK
1) Press the Numeric buttons to enter
‘0000’ or the last set password at [Old
Password] ꢀeld.
2) Enter the new password at [New
Password] ꢀeld.
[Parental control]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
3) Enter the new password again at [Conꢀrm
new password] ꢀeld.
1. Press
.
2. Select a rating level, then press OK
3. Press the Numeric buttons to enter the
password.
4) Press OK to exit the menu.
Note
Note
• If you forget the password, enter ‘0000’ before
you set a new password.
• Rated DVDs above the level you set in
[Parental control] require a password to be
played.
• The ratings are country-dependent. To allow
all discs to play, select ‘8’.
[Version Info]
Displays the software version of this DVD
player.
• Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
Tip
Tip
• This information is required when you want
to ꢀnd out if a newest software version is
available at the Philips website that you may
download and install on this DVD player.
• You can set or change the password, go to
[Preferences] > [Password].
[Password]
Sets or changes the password for locked discs
and play restricted DVDs.
[Default]
Resets all the settings of this DVD player to
factory default, except for [Parental control]
and [Password] settings.
EN 23
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢀ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢋ
7 Select an audio track, then press OK.
7 Advanced
features
•
•
•
To select another track, repeat step
7.
To select all tracks, select [Select All]
in the menu, and press OK.
To deselect all tracks, select
[Deselect all] in the menu, and press
OK.
Create MP3 ꢀles
8 Select [Start] in the menu, then press OK
to start to convert.
With this disc player, you can convert audio
CDs into MP3 audio ꢀles.The created MP3
audio ꢀles are saved in the USB ꢁash drive.
» Once complete, a new folder is
created automatically in the USB ꢁash
drive to store all the new MP3 ꢀles.
1 Insert an audio CD.
•
To exit the menu, select [Exit], then
press OK.
2 Connect a USB ꢁash drive to the
jack
on this product.
Note
3 During disc play, press AUDIO/CREATE
MP3.
• When you convert, never press any button.
• DTS CDs and copy-protected CDs cannot be
converted.
» The MP3 creation menu is displayed.
4 Select [Yes] in the menu, then press OK.
• Writer-protected or password-protected USB
ꢁash drives cannot be used to store MP3 ꢀles.
Create MP3
TRACK
OPTIONS
Track01
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
128kbps
USB 1
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
Device
Summary
Press [OK] button
to change speed.
Select all
Start
Exit
Deselect all
5 Select a conversion option in the
[OPTIONS] panel, then press OK
repeatedly to select an item.
Option
Description
[Speed]
[Bitrate]
Select a copying speed.
Select a quality level.
Higher bitrate for better sound
quality and bigger ꢀle size.
The createed ꢀles can only be
saved in a USB ꢁash drive.
[Device]
6 Press to access the [Track] panel.
24 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢌ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢇ
Care
8 Additional
information
Caution
• Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static
sprays intended for discs.
Clean discs
Update software
Wipe the disc with a micro ꢀbre cleaning cloth
from the center to the edge in a straight line
movement.
To check for updates, compare the current
software version of this DVD player with the
latest software version (if available) at the
Philips website.
Caution
• Power supply must not be interrupted during
software upgrade.
Preferences
Audio
Subtitle
Disc Menu
Parental Control
Password
Version Info
Default
1 Press SETUP.
2 Select [Preferences] > [Version Info],
then press OK.
3 Write down the ꢀle name, then press
SETUP to exit the menu.
for the latest software version, using the
ꢀle name for this DVD player.
5 Refer to the upgrade instructions for
more information.
Note
• Disconnect the power cord for a few seconds
and connect again to reboot the system.
EN 25
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢍ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢁꢇ
•
•
DVD: 576 pixels (50 Hz); 480 pixels
(60 Hz)
VCD: 288 lines (50 Hz); 240 lines
(60 Hz)
9 Specification
Note
Audio performance
• Speciꢀcation and design are subject to change
without notice.
•
•
DA converter: 24 bits, 192 kHz
Frequency response:
•
•
•
DVD: 4 Hz - 22 kHz (48 kHz); 4 Hz
- 44 kHz (96 kHz)
SVCD: 4 Hz - 20 kHz (44.1 kHz); 4
Hz - 22 kHz (48 kHz)
CD/VCD: 4 Hz - 20 kHz (44.1 kHz)
Accessories supplied
•
•
•
Remote control and batteries
Audio/video cables
Power cable
•
•
Signal-Noise (1 kHz): > 90 dB (A-
weighted)
Dynamic range (1 kHz): > 80 dB (A-
weighted)
Crosstalk (1 kHz): > 90 dB
Distortion/noise (1 kHz): > 65 dB
MPEG MP3: MPEG Audio L3
Playback media
•
DVD-Video, Video CD/SVCD, Audio CD,
CD-R/CD-RW, DVD+R/+RW, DVD-R/-
RW, Picture CD, MP3-CD, WMA-CD,
USB ꢁash drive
•
•
•
USB
•
•
Compatibility: USB
Class support: UMS (USB Mass Storage
Class)
Audio format
•
Digital:
•
MPEG/AC-3/PCM: Compressed
digital (16, 20, 24 bits fs, 44.1, 48, 96
kHz)
MP3 (ISO 9660): 96, 112, 128, 256
kbps & variable bit rate fs, 32, 44.1,
48 kHz
TV standard
•
Number of lines:
625 (PAL/50Hz); 525 (NTSC/60Hz)
Playback: Multi-standard (PAL/NTSC)
•
•
•
•
•
Analog sound stereo
Dolby surround compatible downmix
from Dolby Digital multi-channel sound
Video performance
•
•
•
Video DAC: 14 bits, 108 MHz
Y Pb Pr: 0.7 Vpp ~ 75 ohm
Video output: 1 Vpp ~ 75 ohm
Connections
•
•
•
•
Y Pb Pr output: Cinch 3x
Video format
Video output: Cinch (yellow)
Audio output (L+R): Cinch (white/red)
Digital output:
•
Digital compression:
•
•
MPEG 2: DVD/SVCD
MPEG 1: VCD
•
1 coaxial: IEC60958 for CDDA/
LPCM; IEC61937 for MPEG 1/2,
Dolby Digital
•
Horizontal resolution:
•
DVD: 720 pixels (50 Hz); 720 pixels
(60 Hz)
VCD: 352 pixels (50 Hz); 352 pixels
(60 Hz)
Main unit
•
•
Dimensions (w x h x d): 360 x 37 x 209
(mm)
•
Vertical resolution:
•
Net Weight: approximately 1.3 kg
26 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢊ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢀꢂ
Power
•
Power supply rating: 110 V - 240 V; 50/60
Hz
•
•
Power consumption: < 10 W
Power consumption in standby mode: <
1 W
Laser speciꢀcation
•
•
•
•
Type: Semiconductor laser InGaAIP
(DVD), AIGaAs (CD)
Wave length: 655 nm (DVD), 790 nm
(CD)
Output Power: 10 mW (DVD), 5 mW
(VCD/CD)
Beam divergence: 60 degrees
EN 27
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢉ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢀꢃ
Sound
No sound.
10 Troubleshooting
•
Ensure that the audio cables are
connected and the connected device is
turned on to the correct input source.
Warning
• Risk of electric shock. Never remove the
casing of the DVD player.
Play
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using the
DVD player, check the following points before
requesting service. If the problem remains
unsolved, register your DVD player and get
The aspect ratio of the screen is not aligned
with theTV display setting.
•
The aspect ratio is ꢀxed on the disc.
The contents of the USB ꢁash drive cannot
be read.
•
The USB ꢁash drive format is not
compatible with this DVD player.
Drive is formatted with different ꢀle
system which is not supported by this
DVD player (e.g. NTFS).
•
If you contact Philips, you will be asked for the
model and serial number of your DVD player.
The model number and serial number are on
the back or bottom of your DVD player.Write
the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this unit do not work.
•
Disconnect this DVD player from the
power outlet for a few minutes, then
connect again.
Picture
No picture.
•
See the TVs user manual on how to
select the correct input on the TV.
Change the TV channel until you see the
Philips screen.
If you have turned on the progressive scan
setting or change the TV system setting,
switch back to default mode: 1) Press to
open the disc compartment. 2) Press the
Numeric button ‘1’ (for progressive scan) or
the Numeric button’3’ (for TV system).
28 EN
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢋ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢀꢃ
Progressive scan
11 Glossary
The progressive scan displays twice the
number of frames per second than in an
ordinary TV system. It offers higher picture
resolution and quality.
A
Aspect ratio
W
WMA
Aspect ratio refers to the length to height
ratio of TV screens. The ratio of a standard
TV is 4:3, while the ratio of a high-deꢀnition
or wide TV is 16:9. The letter box allows you
to enjoy a picture with a wider perspective on
a standard 4:3 screen.
Windows Media™ Audio. Refers to an
audio compression technology developed by
Microsoft Corporation. WMA data can be
encoded with Windows Media player version
9 or Windows Media player for Windows XP.
Files are recognized by their ꢀle extension
‘.wma.’
J
JPEG
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in image
quality in spite of its high compression ratio.
Files are recognized by their ꢀle extension
‘.jpg’ or ‘.jpeg.’
M
MP3
A ꢀle format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
P
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD with
on-screen menus that are recorded onto the
disc. You can enjoy interactive playback and
search.
EN 29
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢁꢇ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢀꢃ
© 2009 Koninklijke Philips Electronics N.V.
Todos los derechos reservados
DVP3320_55/77_UM_V2.1
GYSꢀꢀꢁꢂBHQꢃꢄLQGGꢅꢅꢅ6HFꢃꢆꢀꢂ
ꢁꢂꢂꢇꢈꢉꢈꢁꢂꢅꢅꢅꢃꢊꢆꢀꢉꢆꢀꢁ
|