DVD VIDEO PLAYER
DVP3160K
Thank you for choosing Philips.
Need help fast?
Read your User’s Manual first for quick tips that make using
your Philips product more enjoyable.
If you have read your instructions and still need assistance,
01-49_dvp3160K_555_eng_2.indd
1
2007-03-30 3:15:16 PM
Index
English------------------------------------------6
Español--------------------------------------- 50
Português --------------------------------- 94
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
software upgrade.
01-49_dvp3160K_555_eng_2.indd
3
2007-03-30 3:15:28 PM
General Information
Environmental Information
Laser Safety
All unnecessary packaging has been
omitted. The packaging has been made
easy to separate into two materials;
cardboard (box) and polyethylene (bags,
protective foam sheet).
This unit employs a laser. Due to possible
eye injury, only a qualified service person
should remove the cover or attempt to
service this device.
NOTE:
Pictures shown maybe different
between countries.
Your DVD player consists of materials
which can be recycled and reused if
disassembled by a specialised company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
CAUTION:
WARNING LOCATION: ON THE
BACKPLATE OF THE SET
NEVER MAKE OR CHANGE
CONNECTIONS WITH THE
POWER SWITCHED ON.
Manufactured under license from
Dolby Laboratories, Dolby
and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo
are trademarks, or registered
trademarks of Microsoft Corporation
in the United States and/or other
countries.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners.
DivX Certified products: DivX,
DivX Certified and associated logos
are trademarks of DivX, Inc. and
are used under license.
For Customer Use:
LASER
Read carefully the information located at
the bottom or rear of your DVD Video
player and enter below the Serial No.
Retain this information for future
reference.
Type
Semiconductor laser
InGaAlP (DVD)
AIGaAs (CD)
658 nm (DVD)
790 nm (CD)
Wave length
Output Power 7.0 mW (DVD)
10.0 mW (VCD/CD)
Beam divergence 60 degrees
Model No. DVP 3160K
Serial No. ___________________
4
01-49_dvp3160K_555_eng_2.indd
4
2007-03-30 3:15:29 PM
Language Code
5
01-49_dvp3160K_555_eng_2.indd
5
2007-03-30 3:15:29 PM
Contents
Care and Safety Information
Setup.............................................................................................................................................................8
Cleaning discs.............................................................................................................................................8
General Information
Accessories supplied ................................................................................................................................9
Region codes...............................................................................................................................................9
Connections
Connecting to television......................................................................................... 10~11
Using Composite Video jacks (CVBS).............................................................................................. 10
Using Component Video jacks (YPbPr)........................................................................................... 10
Using an accessory RF modulator ......................................................................................................11
Connecting the power cord...........................................................................................12
Optional connections
Connecting to a stereo system.....................................................................................13
Stereo system has right/left Audio In jacks .................................................................................... 13
Connecting to a digital AV receiver.............................................................................13
Receiver has a PCM, Dolby Digital or MPEG decoder................................................................ 13
Connecting a USB Flash Drive or USB mass storage device...................................14
Using USB port....................................................................................................................................... 14
Product Overview
Front and Rear Panels................................................................................................... 15
Remote Control..............................................................................................................16
Getting Started
Step 1: Inserting Batteries.............................................................................................17
Using the remote control to operate the system..........................................................................17
Step 2: Finding your viewing channel...........................................................................17
Step 3: Setting up Progressive Scan feature.............................................................. 18
Step 4: Selecting the matching color system .............................................................19
Step 5: Setting the language ........................................................................................ 20
On-screen display (OSD) language....................................................................................................20
Audio, Subtitle and Disc menu languages........................................................................................20
Playback from Disc
Playable discs.................................................................................................................. 21
Supported formats................................................................................................................................. 21
Playback Features
Starting disc playback ................................................................................................... 22
Basic playback controls................................................................................................. 22
Pausing playback......................................................................................................................................22
Selecting title/chapter/track................................................................................................................22
Stopping playback...................................................................................................................................22
Operations for video playback..................................................................................... 23
Using the Disc Menu .............................................................................................................................23
Zooming in...............................................................................................................................................23
Resuming playback from the last stopped point............................................................................23
Slow Motion.............................................................................................................................................23
Forward / Reverse Searching..............................................................................................................23
Viewing the disc playback information.................................................................24~25
Using the OSD menu ............................................................................................................................ 24
Title/Chapter/Track selection ............................................................................................................ 24
Time Search............................................................................................................................................. 24
Audio/Subtitle.......................................................................................................................................... 24
Angle.......................................................................................................................................................... 24
Time Display............................................................................................................................................25
Repeat........................................................................................................................................................25
Repeat A-B...............................................................................................................................................25
Preview......................................................................................................................................................25
6
01-49_dvp3160K_555_eng_2.indd
6
2007-03-30 3:15:29 PM
Contents
Viewing Audio CD playback information................................................................... 26
Disc Go To / Track Go To / Track Selection..................................................................................26
Repeat........................................................................................................................................................26
Special DVD Features................................................................................................... 26
Playing a Title...........................................................................................................................................26
Changing the Audio Language.............................................................................................................26
Subtitles.....................................................................................................................................................26
Special VCD and SVCD Feature.................................................................................. 27
Playback Control (PBC)........................................................................................................................ 27
Playing a DivX® disc....................................................................................................... 27
USB mass storage device.............................................................................................. 28
Compatibility of USB device ...............................................................................................................28
Playing from USB flash drive or USB memory card reader ................................... 29
Playing MP3/WMA/JPEG Picture CD ....................................................................30-31
General Operation................................................................................................................................30
Playback selection ..................................................................................................................................30
Repeat........................................................................................................................................................30
Playback with multi-angles (JPEG)..................................................................................................... 31
Preview Function (JPEG)...................................................................................................................... 31
Zoom picture (JPEG) ............................................................................................................................ 31
Playing MP3/WMA music and JPEG picture simultaneously....................................................... 31
Karaoke Operations
Playing Karaoke disc...................................................................................................... 32
General Operation................................................................................................................................ 32
Vocal........................................................................................................................................................... 32
Karaoke Menu......................................................................................................................................... 32
DVD Menu Options
Using the General setup menu..............................................................................33~34
Locking / Unlocking the disc for viewing......................................................................................... 33
OSD Language......................................................................................................................................... 33
Sleep...........................................................................................................................................................34
Volume ......................................................................................................................................................34
DivX® VOD registration code............................................................................................................34
Using the Audio setup menu..................................................................................35~37
Analog Output ........................................................................................................................................35
Digital Audio Setup.........................................................................................................................35~36
Sound Mode.............................................................................................................................................36
CD Upsampling....................................................................................................................................... 37
Night Mode – turning on/off ............................................................................................................... 37
Using the Video setup menu..................................................................................38~40
TV Type.....................................................................................................................................................38
Setting the TV Display..........................................................................................................................38
Progressive...............................................................................................................................................39
Picture Setting................................................................................................................................. 39~40
Using the Preference setup menu.........................................................................40~43
Subtitle / Audio / Disc Menu............................................................................................................... 41
Parental..................................................................................................................................................... 41
PBC.............................................................................................................................................................42
MP3/JPEG Menu......................................................................................................................................42
Changing the Password.........................................................................................................................42
Setting the DivX® subtitle font...........................................................................................................43
Restoring to the original settings.......................................................................................................43
Others
Software upgrade .......................................................................................................... 44
Specifications ................................................................................................................. 45
Troubleshooting.......................................................................................................46~47
Frequently Asked Questions (USB)............................................................................ 48
Glossary........................................................................................................................... 49
7
01-49_dvp3160K_555_eng_2.indd
7
2007-03-30 3:15:30 PM
Care and Safety Information
DANGER!
High voltage! Do not open the
device. You run the risk of getting
an electric shock.
Cleaning discs
Some problems occur because the disc
inside the player is dirty (frozen picture,
sound disruptions, picture distortions).
To avoid these problems, discs should be
cleaned on a regular basis.
The machine does not contain any
user-serviceable parts. Please leave
all maintenance work to qualified
personnel.
To clean a disc, use a micro fibre cleaning
cloth and wipe the disc from the center
to the edge in a straight line.
Setup
Finding a suitable location
– Place the set on a flat, hard and stable
surface. Do not place the set on a
carpet.
– Do not put any equipment or heavy
objects on top of the set.
– Do not position the set on top of
other equipment that might heat it up
(such as receiver or amplifier).
– Do not put anything under the set
(such as CDs, magazines).
– Install this unit near the AC outlet and
where the AC power plug can be
reached easily.
CAUTION!
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or anti-static sprays intended for analog
discs. Since the optical unit (laser) of the
DVD player operates at a higher power
than regular DVD or CD players,
cleaning CDs intended for DVD or CD
players may damage the optical unit
(laser). Therefore, refrain from using a
cleaning CD.
Space for ventilation
– Place the apparatus in a location with
adequate ventilation to prevent
internal heat build up. Allow at least
10 cm (4.0”) clearance from the rear
and the top of the set and 5cm (2.0”)
from the left and right to prevent
overheating.
5cm (2.0")
10cm (4.0")
10cm (4.0")
5cm (2.0")
Avoid high temperatures, moisture,
water and dust
– Apparatus shall not be exposed to
dripping or splashing.
– Do not place any sources of danger
on the apparatus (such as liquid filled
objects, lighted candles).
8
01-49_dvp3160K_555_eng_2.indd
8
2007-03-30 3:15:30 PM
General Information
Accessories supplied
Region codes
This DVD player is designed to support
the Region Management System. Check
the regional code number on the disc
package. If the number does not match
the player’s region number (see table
below), the player may be unable to
playback the disc.
Composite
video cable
(yellow) and
audio cables
(white, red)
Tips:
– It may not be possible to play CD-R/RW
or DVD-R/RW in all cases due to the type of
disc or condition of the recording.
– If you are having trouble playing a certain
disc, remove the disc and try a different one.
Improper formatted disc will not played on
this DVD player.
DISC
MENU
DISPLAY
Remote
control and
two AAA
batteries
RETURN
TITLE
Discs that can
be played
Region
SETUP
NEXT
PREV
PLAY/PAUSE
STOP
USB
U.S.A. and
Canada regions
ALL
1
2
3
4
5
6
SUBTITLE
ZOOM
AUDIO
U.K and
Europe regions
ALL
ALL
ALL
ALL
ALL
Asia Pacific,
Taiwan, Korea
AC Power
Cable
Australia,
New Zealand,
Latin America
Russia and
India regions
China, Calcos Islands,
Walls and Futuna
Islands
9
01-49_dvp3160K_555_eng_2.indd
9
2007-03-30 3:15:31 PM
Connections
Connecting to television
COMPONENT
COMPONENT
VIDEO IN
VIDEO IN
S-VIDEO
IN
S-VIDEO
V
U
Y
(Pr/Cr)
AUDIO
IN
V
U
(Pr/Cr)
AUDIO
IN
(Pb/Cb)
(Pb/Cb)
VIDEO IN
VIDEO IN
COMPONENT
V
I
D
E
O
I
N
S-VIDEO
IN
COMPONENT
Y
V
I
D
E
O
I
N
V
U
(Pr/Cr)
AUDIO
OUT
S-VIDEO
IN
V
U
(Pr/Cr)
AUDIO
OUT
(Pb/Cb)
V
I
D
E
O
I
N
(Pb/Cb)
Y
V
I
D
E
O
I
N
Y
1
2
1
2
DIGITAL
OUT
DIGITAL
OUT
TV OUT
TV
COAXIAL
AUDIO OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
IMPORTANT!
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using ComponentVideo jacks
(YPbPr)
Using CompositeVideo jacks
(CVBS)
A Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
C Proceed to page 18 for detailed
progressive scan setup.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
10
01-49_dvp3160K_55_eng_2.indd 10
2007-03-30 3:15:31 PM
Connections (continued)
ANT IN
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
AUDIO IN
ANT IN
TO TV
VIDEO
IN
R
L
CH3 CH4
ANT IN
1
4
3
DIGITAL
OUT
TV OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
IMPORTANT!
C To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the
RF modulator (cable supplied).
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
D Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN jack on the RF modulator. (It may
have been connected to your TV
Using an accessory RF modulator
previously. Disconnect it from the TV).
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack on
the RF modulator.
B Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV jack
on the RF modulator to the ANTENNA
IN jack on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
11
01-49_dvp3160K_55_eng_2.indd 11
2007-03-30 3:15:31 PM
Connections (continued)
Connecting the power cord
DIGITAL
OUT
TV OUT
COAXIAL
COMPONENT VIDEO OUT
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY-ON on the DVD player
front panel.
“– – –” may appear on the display
panel.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-49_dvp3160K_55_eng_2.indd 12
2007-03-30 3:15:32 PM
Optional connections
Connecting to a stereo
system
Connecting to a digital AV
receiver
STEREO
AV Receiver
AUDIO
IN
AUDIO
IN
DIGITAL
DIGITAL
DAL
OU
DIGITAL
OUT
TV OUT
TV OUT
COAXIAL
AUDIO OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Receiver has a PCM, Dolby Digital
or MPEG decoder
Stereo system has right/ left Audio
In jacks
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
A Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your television.
B Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your receiver (cable not
supplied).
B Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of the
DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
C Set the DVD player’s digital output to
PCM-Only or ALL depending on the
capabilities of your receiver (see page 36
{Digital Output}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
13
01-49_dvp3160K_55_eng_2.indd 13
2007-03-30 3:15:32 PM
Optional connections (continued)
Connecting a USB Flash
Drive or USB mass storage
device
USB extension cable
(Optional accessory - not supplied)
Tips:
Using USB port
– The USB port supports playback of JPEG/
MP3/WMA files.
– Not all Portable audio/video players and
Digital cameras are supported.
You can only view the content of
following supported USB devices through
this DVD player.
– While connected to a card reader, only
one card can be read at the same time.
– If non-supported USB device is plugged in,
‘Device Not Supported’ will be displayed.
– If the USB device does not fit into the USB
port, a USB extension cable is required.
– The format FAT16, FAT32 can be
supported by USB and not NTFS.
A Connect the supported USB device
directly to the USB port on the front
panel (as shown on the above
illustration).
B Press USB button on the remote
control in order to view the files stored
in the supported USB device.
C Stop the playback before removing the
supported USB device from the USB
port.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
14
01-49_dvp3160K_55_eng_2.indd 14
2007-03-30 3:15:32 PM
Product Overview
Front and Rear Panels
STANDBY-ON 2
USB Port
– Input of the supported USB device
–
Turns on the player or switches
to standby mode
STOP
– Stops playback
ꢀ
Disc Tray
OPEN/CLOSE ç
PLAY/PAUSE u
– Starts or pauses playback.
–
Opens or closes the disc tray.
Display panel
IR Sensor
– Point the remote control towards
this sensor
–
Shows information about the
current status of the DVD player.
Mic
– For connecting microphone
Level
– Microphone volume control
Mains ~ (AC Power Cord)
Connect to a standard AC outlet
–
Audio Out (Left/Right)
– Connect to AUDIO inputs of an
amplifier, receiver or stereo
system
TV OUT (CVBS)
–
Connect to CVBS Video input of
a television
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input
of a digital audio equipment
YPbPr (Component Video Out)
–
Connect to YPbPr input of a
television
DIGITAL
OUT
TV OUT
COAXIAL
AUDIO OUT
COMPONENT VIDEO OUT
15
01-49_dvp3160K_55_eng_2.indd 15
2007-03-30 3:15:32 PM
Product Overview (continued)
Remote Control
2
–
DISC MENU
– Enters or exits the disc
contents menu
To switch the DVD player
to standby mode or ON
– Switches on or off the
playback control mode (for
VCD 2.0 only)
DISPLAY
Displays information on TV
screen during playback
–
OK
– Confirms an entry or
selection
W X
–
Cursor buttons for moving
to the left or right, do a fast
forward/reverse search.
RETURN/TITLE
– To go back to previous
menu/ show title menu
S T
–
Cursor buttons for moving
up/down, do a slow
forward/backward
PREV í
– Skips to the previous title/
chapter/ track
SETUP
Enters or exits the system
setup menu
–
– Press and hold to fast
backward
NEXT ë
STOP
– Stops playback
ꢀ
–
Skips to the next title/
chapter/track
Press and hold to fast
forward
–
u PLAY/PAUSE
– Starts or pauses playback
USB
Access the content of the
SUBTITLE
– To access subtitle language
system menu
–
connected USB device and
exit from USB mode
ZOOM
– Enlarge a picture on the TV
screen
Alphanumeric keypad
–
Selects numbered items in
a menu
VOCAL
– Choose audio channels or
karaoke methods
AUDIO
Selects an audio language
–
(DVD/VCD) or an audio
channel
KARAOKE
– To toggle between ‘Mic’,
‘Vol’, ‘Echo’, ‘Key’ or
‘Karaoke Scoring’
16
01-49_dvp3160K_55_eng_2.indd 16
2007-03-30 3:15:32 PM
Getting Started
Step 1 : Inserting Batteries
Step 2 : Finding your viewing
channel
A Press STANDBY-ON 2 on the DVD
player to turn it on.
B Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
ꢁUsually these channel are between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO.
See your TV’s manual for more
details.
A Open the battery compartment.
B Insert two batteries type R03 or AAA,
following the indications (+ –) inside the
compartment.
ꢁOr, you may go to channel 1 on your
TV, then press the Channel down
button repeatedly until you see the
Video In channel.
ꢁOr, the TV remote control may have
a button or turn that chooses
different video modes.
C Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
ꢁOr, set the TV to channel 3 or 4 if
you are using an RF modulator.
– Batteries contain chemical
substances, so they should be
disposed of properly.
C If you are using external equipment, (such
as audio system or receiver), turn it on
and select the appropriate input source
for the DVD player output. Refer to the
equipment user’s manual for detail.
Using the remote control to
operate the system
A Aim the remote control directly at the
remote sensor (IR) on the front panel.
B Do not put any objects between the
remote control and the DVD player
while operating the DVD player.
17
01-49_dvp3160K_55_eng_2.indd 17
2007-03-30 3:15:33 PM
Getting Started (continued)
G Select { On }, then press OK to confirm.
Step 3 : Setting up
ꢁThe menu will appear on the TV.
Progressive Scan feature
ACTIVATING PROGRESSIVE SCAN:
1.ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2.CONNECT USING YPBPR(GBR) VIDEO CABLE.
(for Progressive Scan TV only)
3.IF THERE IS
A
DISTORTED PICTURE,
WAIT 15 SECONDS FOR AUTO RECOVERY.
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
OK
CANCEL
H Press W to highlight { OK } and press
OK to confirm.
I Turn on your TV progressive scan mode
(refer to your TV user manual).
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
10).
– Ensure that you have completed the
basic installation and setup.
ꢁThe menu will appear on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
OK
CANCEL
A Turn on your TV and set to interlace
J Press W to highlight { OK } and press
OK to confirm.
mode (refer to your TV user manual).
B Press STANDBY-ON 2 on the
remote control to turn on the DVD
player.
ꢁThe setup is now completed and you
can start enjoy the high quality
picture.
C Select the correct video-in channel.
To deactivate Progressive Scan
manually:
ꢁThe DVD background menu appears.
D Press SETUP.
ꢂWait for 15 seconds for the auto
recovery.
E Press X to select { Video Setup Page }.
OR
Video Setup Page
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
TV Type
TV Display
Progressive
Picture Setting
B Press numeric keypad ‘1’ on the
remote control for few seconds.
On
Off
ꢁThe DVD background screen appears.
Tip:
– There are some progressive scan TVs and
High-Definition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
F Press S T repeatedly to select
{ Progressive }, then press X.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
18
01-49_dvp3160K_55_eng_2.indd 18
2007-03-30 3:15:33 PM
Getting Started (continued)
E Select a setting and press OK.
ꢁFollow the instructions show on the
TV to confirm the selection.
Step 4 : Selecting the
matching color system
CHANGING PAL TO NTSC:
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
1.ENSURE THAT YOUR TV SUPPORTS
NTSC STANDARD.
2.IF THERE IS
A
DISTORTED PICTURE
DISPLAYED ON THE TV , WAIT 15
SECONDS FOR AUTO RECOVERY.
OK
CANCEL
Video Setup Page
CONFIRM AGAIN TO USE NEW TV
TYPE SETTING.
TV Type
PAL
TV Display
Progressive
Picture Setting
MULTI
NTSC
OK
CANCEL
F Press W to highlight { OK } and press
OK to confirm.
To reset to previous TV color
system:
A Press SETUP.
B Press X to select { Video Setup Page }.
ꢂWait for 15 seconds for the auto
recovery.
C Press S T repeatedly to select { TV
OR
Type }, then press X.
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
D Use S T to select one of the options
below:
B Press numeric keypad ‘3’ on the
remote control for few seconds.
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
ꢁThe DVD background menu appears.
Tips:
– Before changing the current TV colour
setting, ensure that your TV supports the
‘selected TV Type’ system.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
19
01-49_dvp3160K_55_eng_2.indd 19
2007-03-30 3:15:33 PM
Getting Started (continued)
Audio, Subtitle and Disc menu
languages
Step 5 : Setting the language
You can choose your preferred language
or sound track from audio, subtitles and
disc menu languages. If the selected
language is not available on the disc, the
disc’s default language will be used
instead.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
Select this to change the language of this
DVD player screen display menu.
The menu language (on-screen display)
for the system will remain as you set it.
Preference Page
Audio
Subtitle
English
Chinese
French
Spanish
Portuguess
Polish
Disc Menu
Parental
PBC
Mp3 / Jpeg Nav
Password
General Setup Page
Disc Lock
Italian
OSD Language
Sleep
ENGLISH
Volume
DivX(r) VOD Code
A Press STOP Ç twice to stop playback,
(if any), then press SETUP on the
remote control.
B Press X to select { Preference Page }.
A Press SETUP.
C Press S T to highlight one of the
B Press S T to select { OSD Language },
options below, then press X.
then press X.
{ Audio }
C Use S T to select a language and press
Select this to change disc sound track
language.
OK to confirm.
{ Subtitle }
Select this to change the subtitle language.
{ Disc Menu }
Select this to change the language of the
disc menu.
D Use S T to select a language and press
OK to confirm.
If the language you want is not in
the list, then select { Others }, then
use the numeric keypad (0-9) on the
remote to enter the 4-digit language code
‘XXXX’ (see page 5 ‘Language Code’)
and press OK.
E Repeat steps C - D for other language
settings.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
20
01-49_dvp3160K_55_eng_2.indd 20
2007-03-30 3:15:33 PM
Playback from Disc
IMPORTANT!
– If the inhibit icon
appears on
Super Video CD
the TV screen when a button is
pressed, it means the function is not
available on the current disc or at
the current time.
MP3-Disc
– DVD discs and players are designed
with regional restrictions. Before
playing a disc, make sure the disc is
for the same zone as your player.
DivX® Disc
(DivX 3.11, 4.x, 5.x and 6.0)
®
Supported formats
MP3/WMA tracks
– The file extensions has to be ‘.mp3’,
‘.wma’
Playable discs
Using this DVD player, you can playback
on the following discs:
– JPEG/ISO format
– Maximum 14 characters display.
– Supported bit-rate;
32 – 320 kbps (MP3)
DVD Video (Digital Versatile
Disc)
DVD RW (DVD Rewritable)
Audio/Video format or
MP3/WMA/JPEG/DivX® files.
32 – 192 kbps (WMA)
JPEG pictures
– The file extensions has to be ‘.JPG’
and not ‘.JPEG.’
– JPEG/ISO format
DVD R (DVD Recordable)
Audio/Video format or
MP3/WMA/JPEG/DivX® files.
– It can only display DCF-standard still
pictures or JPEG pictures such as
TIFF.
CD-R (CD-Recordable)
Audio/Video format or
MP3/WMA/JPEG/DivX® files.
®
DivX movies
– The file extensions has to be ‘.AVI,’
‘.MPG,’ or ‘.MP4.’
– DivX 3.11, 4.x, 5.x and 6.0
CD-RW (CD-Rewritable)
Audio/Video format or
MP3/WMA/JPEG/DivX® files.
®
– Q-pel accurate motion compensation
– Global Motion Compensation (GMC)
playback.
Audio CD (Compact Disc
Digital Audio)
Tips:
– Maximum 100 sessions for CD and 10
multi border for DVD are supported.
– For DVD-R and DVD-RW multi border,
only finalized disc are supported.
– For DVD+R and DVD+RW multi border
both finalized and unfinalized disc are NOT
supported.
Video CD
(Formats 1.0, 1.1, 2.0)
TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of
the disc, or due to the condition of recording and authoring software that was used.
21
01-49_dvp3160K_55_eng_2.indd 21
2007-03-30 3:15:33 PM
Playback Features
Starting disc playback
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
A Turn on the TV to the correct program
number for the DVD player (e.g. ‘EXT’,
‘0’, ‘AV’).
B Press STANDBY-ON 2 to turn on
Pausing playback
the DVD player.
A During playback, press PLAY/PAUSE
u to pause playback and display a still
picture.
C Press OPEN/CLOSE ç on the front of
the DVD player.
ꢁSound will be muted.
ꢂYou can also hold down the STOP
ꢀ
button on the remote control to open
and close the disc tray.
B To resume normal playback, press
PLAY/PAUSE u again.
D Place a disc into the disc tray with the
label facing up, then press OPEN/
CLOSE ç.
Selecting title/chapter/track
ꢂDuring playback, press PREV í to go
to the beginning of the currect chapter/
track, press PREV í again to go to the
previous title/chapter/track.
ꢁFor double-sided discs, load the side
which you want to play facing up.
E Playback may start automatically.
If not, press PLAY/PAUSE u.
ꢂPress NEXT ë to go to the next
ꢂIf a disc menu appears on the TV, see
chapter/track.
page 23 'Using the Disc Menu'.
ꢂPress DISPLAY to display the disc
information text line for title/chapter/
track (example - 00/08).
ꢂIf the child lock was activated for the
inserted disc, you have to enter your six-
digit password (see page 42).
ꢂUse alphanumeric keypad (0-9) to
enter valid title/chapter/track number.
ꢁThe playback skips to the selected
title/chapter/track.
ꢂFor more playback features, see pages
22~31.
Tips:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
Stopping playback
ꢂPress STOP
.
ꢀ
Tips:
– Screen saver will start automatically if the
disc playback is stopped/paused for about 5
minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
22
01-49_dvp3160K_55_eng_2.indd 22
2007-03-30 3:15:34 PM
Playback Features (continued)
ꢂDuring the message appears on the TV
screen, press PREV to start playback
from the beginning.
Operations for video
playback
ꢁPlayback restarts from the first title
(DVD) or the beginning of the title/
track (VCD/CDDA/SVCD).
Using the Disc Menu
Depending on the disc, a menu may
appear on the TV screen once you load
in the disc.
To cancel resume mode
ꢂIn stop mode, press STOP Ç again.
Tip:
To select a playback feature or item
ꢂUse S T W X keys or numeric
keypad (0-9) on the remote, then press
OK to start playback.
– To remove the message from the TV
screen, press DISPLAY.
Slow Motion
To access or remove the menu
ꢂPress DISC MENU on the remote.
You can slow forward or slow reverse a
disc during playback and select a different
speed.
Zooming in
For DivX®,DVD,VCD,SVCD
A Press S T during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16
(forward [DivX®,DVD,VCD,SVCD] or
backward [DVD]).
This function allows you to enlarge the
picture on the TV screen and to pan
through the enlarged picture.
A During playback, press ZOOM
repeatedly to display the picture with
different scales.
ꢁSound will be muted.
B To return to normal speed, press PLAY/
ꢁUse S T W X keys to pan through
the enlarged picture.
PAUSE u.
ꢁPlayback will continue.
Forward / Reverse Searching
B Press ZOOM repeatedly to return to
You can fast forward or fast reverse a
disc during playback and select a desired
search speed.
For DivX®,DVD,VCD,SVCD,CD,
MP3, WMA
the original size.
Resuming playback from the last
stopped point
Resume playback of the last 5 discs is
possible, even if the disc was ejected
(open) or standby. Auto resume is active
for DVD,VCD,SVCD,CD types of discs.
A Press W X directly or press í ë for 2
seconds during playback to select the
required speed: 2X, 4X, 8X, 16X or 32X
(backward or forward).
ꢁSound will be muted (DVD/VCD/
SVCD/DivX®) or intermittent (MP3/
WMA/CD).
ꢂLoad one of the last 5 discs.
ꢁ‘Play from start, press [PREV]’ appears
during playback for first 10 seconds.
B To return to normal speed, press PLAY/
PAUSE u.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
23
01-49_dvp3160K_55_eng_2.indd 23
2007-03-30 3:15:34 PM
Playback Features (continued)
Time Search
Viewing the disc playback
information
A Press S T to select {TT Time} / {CH
Time} / {Disc Time} or {Track Time},
then press X to access.
B Use the alphanumeric keypad 0-9 to
input the valid time (such as 0:34:27).
ꢁThe playback skips to the chosen
time.
Using the OSD menu
OSD menu shows the disc playback
information (for example, title or chapter
number, elapsed playing time, audio/
subtitle language), a number of operations
can be done without interrupting disc
playback.
Audio / Subtitle
A Press S T to select {Audio} or
ꢂDuring playback, press DISPLAY on the
remote control.
{Subtitle}, then press X to access.
B Press S T to select one language.
ꢁThe available disc information appears
on the TV screen with the following
sequence.
C Press OK to confirm.
ꢁThe current audio or subtitle language
will be changed to the selected
language.
MENU
Title
01/01
01/01
5.1CH
Off
Chapter
Audio
Subtitle
Others
Angle
A Press S T to select {Angle}, then press
Bitrate 61
Total Elapsed 0:48:59
(DVD)
(VCD)
X to access.
MENU
Track
Disc Time
Track Time
Repeat AB
B Use the alphanumeric keypad 0-9 to
input a valid number.
01/21
1:12:32
0:02:29
Off
ꢁPlayback will go to the selected angle.
Bitrate 61
Total Elapsed 0:48:59
Title/Chapter/Track selection
A Press S T to select {Title} / {Chapter}
or {Track}, then press X to access.
B Use the alphanumeric keypad 0-9 to
input a valid number (e.g. 04/05).
ꢁThe playback skips to the chosen title/
chapter/track.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
24
01-49_dvp3160K_55_eng_2.indd 24
2007-03-30 3:15:35 PM
Playback Features (continued)
Time Display
Repeat A-B
ꢂPress S T to select {Time Disp.} (Time
Display), then press X to access.
ꢁDepending on the disc in the DVD
player, the following display types
appear on the TV screen.
A Press S T to select {Repeat A-B}.
B Press OK to mark the starting point ‘A’.
C Press OK again to mark the ending point
‘B’.
ꢁThe playback from point ‘A’ and ‘B’ is
For DVD
– TT Elapsed (elapsed playing time of
current Title)
repeat.
D Press OK the third time to exit.
– TT Remain (remaining playing time of
current Title)
Preview
– CH Elapsed (elapsed playing time of
current Chapter)
– CH Remain (remaining playing time of
current Chapter)
The preview function allows you to
reduce the picture of 6 tracks enough to
display in a full screen.
A Press S T to select {Preview}, then
press X to access.
For VCD/SVCD
– Total Elapsed (elapsed playing time of
current Disc)
– Total Remain (remaining playing time
of current Disc)
– Single Elapsed (elapsed playing time of
current Track)
ꢁThe preview menu appears on the TV
screen.
Select Digest Type:
Title Digest
Select Digest Type:
Track Digest
Chapter Digest
Title Interval
Disc Interval
Track Interval
Chapter Interval
– Single Remain (remaining playing time
of current Track)
(DVD example)
(Video CD example)
B Press S T to select the preview type,
then press OK.
Repeat
A Press S T to select {Repeat}, then press
X to access.
ꢁThe picture of each segment will
appears on the TV screen.
ꢁRepeat menu appears on the TV screen.
01
02
03
A
D
B
E
C
F
B Press S T to select one of the following
05
06
04
repeat mode.
For DVD
– Chapter (currently playing chapter)
– Title (currently playing title)
– All (entire disc)
(example of 6 thumbnail pictures display for
DVD chapter digest preview type)
C Press S T W X to select a track of
input your selected track number using
the alphanumeric keypad (0-9), then
press OK.
– Off (cancel)
For Video CD
– Track (currently playing track)
– All (entire disc)
ꢁPlayback will start automatically on
the selected track.
– Off (cancel)
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
25
01-49_dvp3160K_55_eng_2.indd 25
2007-03-30 3:15:35 PM
Playback Features (continued)
Viewing Audio CD playback
information
Special DVD Features
Playing aTitle
This function displays audio disc
information on the TV screen during
playback.
A Press DISC MENU.
ꢁThe disc title menu appears on the TV
screen.
ꢂDuring playback, press DISPLAY.
ꢁA list of available disc information
appears on the TV screen.
B Use S T W X keys or alphanumeric
keypad 0-9 to select a play option.
C Press OK key to confirm.
Disc GoTo /Track GoTo /Track
Selection
Changing the Audio Language
For DVD
A Press DISPLAY repeatedly to select an
option.
ꢂPress AUDIO repeatedly to select
B Enter minutes and seconds from left to
right in the time edit box using
alphanumeric keypad 0-9.
different audio languages.
Changing the Audio Channel
For VCD
ꢁPlayback will change to the chosen
time or to the selected track.
ꢂPress AUDIO to select the available
audio channels provided by the disc
(MONO LEFT, MONO RIGHT, MIX-
MONO, STEREO).
For Audio CD
– Disc Go To: XX/XX (enable to select
any part within the disc)
– Track Go To: XX/XX (enable to
select any part within the current
track)
Subtitles
– Select Track: XX/TT (enable to select
any track within the disc)
ꢂPress SUBTITLE repeatedly to select
different subtitle languages.
Repeat
A Press DISPLAY repeatedly to select
{Off}.
B Press W X to switch between repeat
mode.
For Audio CD
– Track (currently playing track)
– All (entire disc)
– Off (cancel)
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
26
01-49_dvp3160K_55_eng_2.indd 26
2007-03-30 3:15:35 PM
Playback Features (continued)
SpecialVCD and SVCD
Feature
Playing a DivX® disc
This DVD player supports the DivX®
movie playback that you download from
your computer onto a CD-R/RW or
DVD R/RW (see page 34 for more
information).
Playback Control (PBC)
For VCD with Playback Control
(PBC) feature (version 2.0 only)
A Load a DivX® disc.
ꢁThe data disc menu appears on the
TV screen.
ꢂPress DISC MENU to toggle between
‘PBC ON’ and ‘PBC OFF’.
ꢁIf you select ‘PBC ON’, the disc menu
(if available) will appear on the TV.
ꢁUse the PREV í / NEXT ë to go
to previous/next page or use the
alphanumeric keypad 0-9 to select a
play option.
B Press S T to select the folder and press
OK to open the folder.
C Press S T to select a track/file.
D Press OK to confirm.
ꢂPress SUBTITLE on the remote
ꢂDuring playback, pressing RETURN/
TITLE will return to the menu screen (if
PBC is on).
control will turn on or off the subtitle.
ꢂIf multilingual subtitles are embedded on
the DivX® disc, pressing SUBTITLE will
change the subtitle language during
playback.
If you want to skip the index menu
and playback directly from the
beginning,
ꢂIf multi audio are embedded on the
DivX® disc, pressing AUDIO repeatedly
to select different audio language during
playback.
ꢂPress DISC MENU key on the remote
control to turn to PBC off.
Tips:
– Subtitle files with the following filename
extensions (.srt, .smi, .sub, .ssa, .txt) are
supported but do not appear on the file
navigation menu.
– The subtitle filename (.sub) have to be
saved under the same filename as the movie
(.avi) in the same folder.
[For example, Folder A: abc.avi and abc.sub]
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
27
01-49_dvp3160K_55_eng_2.indd 27
2007-03-30 3:15:35 PM
Playback Features (continued)
Compatibility of USB device
USB mass storage device
ꢂNot all Portable audio/video players and
Digital cameras are supported.
When connecting a USB mass storage
device to the DVD player, you can enjoy
the device’s stored music through the
DVD player.
ꢂIf a non-supported device is connected,
the TV screen will display ‘Device Not
Supported’.
ꢂCompatible USB mass storage device:
– USB flash memory (USB 2.0 or USB
1.1)
ꢂThe USB port can supports the playback
of JPEG/MP3/WMA files and are able to
read ‘.avi’, ‘.mp4’ and ‘.mpg’ container.
– USB flash players (USB 2.0 or USB
1.1)
– memory cards (requires an additional
card reader to work with this DVD
player).
ꢂCopy protected contents are not
playable.
ꢂSupported formats:
– USB or memory file format FAT16,
FAT 32 (sector size: 2K bytes)
ꢂThe DVD player will not play or support
the following:
– Empty albums: an empty album is an
album that does not contain MP3/
WMA files and will not be shown in
the display.
– Non-supported file formats are
skipped. This means that e.g.: Word
document ‘.doc’ or MP3 files with
extension ‘.dlf’.
– AAC, PCM and WAV audio files.
– DRM protected WMA files.
– WMA files in Lossless format.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
28
01-49_dvp3160K_55_eng_2.indd 28
2007-03-30 3:15:35 PM
Playback Features (continued)
ꢂThe DVD player will access the USB mass
storage device directly when a USB
device is plug in and if there is no disc
playing.
Playing from USB flash drive
or USB memory card reader
You can play or view the data files (JPEG,
MP3 or WMA) in the USB flash drive or
USB memory card reader through this
DVD player.
Tip:
– A total of 300 folders and maximum of
648 titles can be supported.
However, editing and copying the data
files are not possible.
Tranfer of music files from PC to a
USB mass storage device
A During disc playback, insert a USB mass
storage device into the USB port (see
page 14).
ꢂBy dragging and dropping music files, you
can easily transfer your favorite music
from PC to a USB mass storage device.
ꢁ‘Press USB key to select device’ will
appear on the TV screen.
ꢂFor flash player, you can also use its
music management software for the
music transfer.
B Press USB on the remote control to
access the data in the drive.
ꢁA file menu that contains all
supported files will appears on the TV
screen.
ꢂHowever, those WMA files may not be
playable for compatibility reasons.
ꢁThe word USB1 will be highlighted
on the menu (only one USB mass
storage device is connected).
00:00 00:00
001/005
\
01
02
03
072
Disc USB1
C Press S T to select a file, then press
OK to confirm.
D Press USB on the remote control to exit
from the menu and switch to disc
playback.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
29
01-49_dvp3160K_55_eng_2.indd 29
2007-03-30 3:15:36 PM
Playback Features (continued)
E Press OK to confirm.
Playing MP3/WMA/JPEG/
Picture CD
Tip:
– If the playing file is not selected, the ID3/
Meta information will disappear.
This DVD player can playback MP3,
WMA and JPEG files on a personally
recorded CD-R/RW disc, commercial
CD or USB device.
Playback selection
During playback, you can;
ꢂPress PREV í / NEXT ë to select
the previous/next track/file in the current
folder.
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
17 ‘Finding your viewing channel’).
ꢂPress PLAY/PAUSE u repeatedly to
pause/resume playback.
General Operation
Repeat
A Load a disc or plug in an USB device.
ꢁThe disc reading time may exceed 30
seconds due to the complexity of the
directory/file configuration.
ꢂPress DISPLAY to switch between the
following repeat mode.
For MP3/WMA
ꢁThe data disc menu appears on the
TV screen.
– Repeat One (currently playing file)
– Repeat Folder (all files in selected
folder)
– Folder (playing all files)
– Single (currently playing file once)
01:42 04:40 128kbps
001/020
\MP3_files_128kbs
For JPEG, DivX®
In STOP mode,
--
MP3 Music 1
MP3 Music 2
MP3
MP3
– Repeat One (currently playing file)
– Repeat Folder (all files in selected
folder)
Picture 1
– Folder (playing all files)
– Single (currently playing file once)
B Press PREV í / NEXT ë to go to
previous / next page of the menu.
In PLAY mode,
For JPEG,
C Press S T to select the folder and press
Press DISPLAY during playback, 12
thumbnail pictures appears on the TV
screen.
OK to open the folder.
D Press S T to select a track/file.
ꢂIf a jpeg file is selected, a preview will
For DivX®
Press DISPLAY to select {Single
Elapsed}, {Single Remain} or no time
display.
appear on the TV screen.
ꢂIf a MP3/WMA file is selected, ID3 (MP3 -
including at least title, singer and album)
and Meta data (WMA - including title,
artist, copyright and comment)
information appears on the TV screen.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
30
01-49_dvp3160K_55_eng_2.indd 30
2007-03-30 3:15:36 PM
Playback Features (continued)
Playback with multi-angles (JPEG)
Zoom picture (JPEG)
ꢂDuring playback, press S T W X to ꢂDuring playback, press ZOOM
rotate the picture on the TV screen.
S: flip the picture vertically by 180º
T: flip the picture horizontally by 180º
W: rotate the picture anti-clockwise by
90º
repeatedly to display the picture with
different scales.
ꢂUse S T W X to view the zoomed
picture.
X: rotate the picture clockwise by 90º
Playing MP3/WMA music and JPEG
picture simultaneously
Tips:
– It may not be possible to play certain
MP3/JPEG disc due to the configuration and
characteristics of the disc or condition of the
recording.
A Load a disc that contains MP3/WMA
music and JPEG picture files.
ꢁThe disc menu appears on the TV
screen.
– It is normal to experience an occasional
‘skip’ while listening to your MP3 disc.
– For multi-session discs with different
formats, only the first session will be
available.
B Select an MP3/WMA track.
C During MP3/WMA music playback, select
a picture file on the TV screen and press
OK.
ꢁA slide show will start at the same
time as the MP3/WMA audio file is
playing.
Preview Function (JPEG)
This function shows the content of the
current folder or the whole disc.
A Press DISPLAY during playback.
ꢁ12 thumbnail pictures will appear on
the TV screen.
D To quit simultaneous playback, press
STOP Ç to stop the slide show.
E Press STOP Ç again to stop the audio.
Tip:
– Some files on Kodak or JPEG disc may be
distorted during playback due to the
configuration and characteristics of the disc.
– During simultaneous playback, fast
forward / reverse or slow forward is not
available.
B Press PREV í / NEXT ë to display
the other pictures on the previous / next
page.
C Press S T W X to select one of the
picture and press OK to start playback.
D Press DISC MENU to return to Picture
CD menu.
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
31
01-49_dvp3160K_55_eng_2.indd 31
2007-03-30 3:15:36 PM
Karaoke Operations
Karaoke menu
Playing Karaoke discs
ꢂPress KARAOKE repeatedly to toggle
between ‘MIC’, ‘Vol’, ‘Echo’, ‘Key’ or
‘Karaoke Scoring’.
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel. (See page
17 ‘Finding your viewing channel’).
A When ‘MIC’ is selected, press W X to
set ‘Mic On/Off’.
B When ‘Vol’ is selected, press W X to
General Operation
adjust the vocal value between 0 and 20.
C When ‘Echo’ is selected, press W X to
adjust the echo level between 0 and 20.
D When ‘Key’ is selected, press W X to
adjust the pitch value between -16 and
16.
This function allows you to adjust the key
tone level to match your vocal.
A Connect a microphone (not supplied) to
MIC on the front panel of the DVD
player.
Karaoke Scoring
This scoring function enables you to
compete your scores.
B Load a karaoke disc.
ꢂWhen ‘Karaoke Scoring’ is selected,
press W X to select the scoring ranks.
ꢁ{Off} – {Basic} – {Intermediate} –
{Advance}
C Press KARAOKE repeatedly to access
Karaoke menu MIC On/Off.
ꢁ‘MIC On/Off’ appears on the TV
screen.
ꢂKaraoke score will only appear on the TV
screen when user scores 30 points and
above at the end of each song.
ꢁPress W X to turn ‘On’ or ‘Off’ the
microphone.
D Adjust the microphone volume up or
down using MIC LEVEL button on the
side panel of the DVD player.
ꢂThe message ‘Good effort, try harder
again’ will appear if scoring less than 30
points.
Tip:
ꢂPlayback will be paused and will not
resume during scoring. Press OK to exit
this scoring pause mode.
– Before connecting the microphone, set the
microphone volume to the minumum level to
prevent howling.
ꢂPress PREV í / NEXT ë, the
current track scoring will be skipped.
Vocal
Tip:
ꢂYou can fade out the original vocal from
– The Karaoke score function is only
available in DVD and VCD discs.
a karaoke disc.
ꢂPress VOCAL repeatedly to choose
different audio modes.
Tip:
– This function and on-screen display
depends on the availability of the disc.
32
01-49_dvp3160K_55_eng_2.indd 32
2007-03-30 3:15:36 PM
DVD Menu Options
Locking/Unlocking the disc for
viewing
This DVD Player setup is carried out via
the TV, enabling you to customize the
DVD player to suit your particular
requirement.
Not all discs are rated or coded by the
disc maker. You can prevent a specific
disc from playing by locking the disc. Up
to 20 discs can be locked.
Using the General setup
menu
A In ‘General Setup Page’, press S T to
select { Disc Lock }, then press X.
{ Lock }
A Press SETUP on the remote control.
Select this to block the playback of the
current disc. Subsequent access to a
locked disc requires six-digit password.
The default password is '136900' (see
page 42 'Changing the password').
ꢁThe system setup menu appears.
General Setup Page
Disc Lock
OSD Language
Sleep
{ Unlock }
Select this to unlock the disc and allow
future playback.
Volume
DivX(r) VOD Code
B Use S T to select a setting and press
OK to confirm.
B Press W X to select { General Setup
OSD Language
Page }.
This menu contains various language
options for the language displayed on the
screen. For details, see page 20.
C Press S T to select an item, then press
X to access.
Example: { OSD Language }
ꢁThe options for the selected item
appears.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to confirm.
Example: { English }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
33
01-49_dvp3160K_55_eng_2.indd 33
2007-03-30 3:15:37 PM
DVD Menu Options (continued)
Sleep
DivX® VOD registration code
Sleep function allows you to turn off the
DVD player automatically after a preset
time.
DivX® VOD registration code allows you
to rent and purchase movies using the
DivX® service from the internet.
For more information, visit website;
A In ‘General Setup Page’, press S T to
select { Sleep }, then press X.
A In ‘General Setup Page’, press S T to
select { DivX(R) VOD Code }, then
press X.
{ 15 Mins }
Turn off the DVD player after 15
minutes.
ꢁThe registration code will appear.
{ 30 Mins }
Turn off the DVD player after 30
minutes.
B Press OK to exit.
C Use the registration code to rent or
purchase the movies from DivX® VOD
{ 45 Mins }
Turn off the DVD player after 45
minutes.
ꢁFollow the instructions and download
the movie from your computer onto a
CD-R/DVD R(W) for playback on
this DVD player.
{ 60 Mins }
Turn off the DVD player after 60
minutes.
Tip:
{ Off }
– All the downloaded movies from DivX®
Registration can only be played back on this
DVD player.
Turn off the sleep function.
B Use S T to select a setting and press
OK to confirm.
– Time search feature is not available during
DivX® movie playback.
Volume
This option allows you to adjust the
volume level between 0 to 20.
A In ‘General Setup Page’, press S T to
select { Volume }, then press X.
ꢁ‘Volume’ control page appears on the
TV screen.
B Press W X to adjust the volume level
between 0 to 20, the default setting is 20.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
34
01-49_dvp3160K_55_eng_2.indd 34
2007-03-30 3:15:37 PM
DVD Menu Options (continued)
Analog Output
Using the Audio setup menu
This option allows you to set the stereo
analog output of your DVD player.
A Press SETUP on the remote control.
A In ‘Audio Setup Page’, press S T to
ꢁThe system setup menu appears.
select { Analog Output }, then press X.
Audio Setup Page
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
Analog Output
Digital Audio Setup
Sound Mode
CD Upsampling
Night Mode
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
{ V SURR }
Allows the DVD player to use virtual
surround sound effects.
B Press W X to select { Audio Setup
Page }.
B Use S T to select a setting and press
OK to confirm.
C Press S T to select an item, then press
X to access.
Digital Audio Setup
Example: { Night Mode }
ꢁThe options for the selected item
appears.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
The options included in Digital Audio
Setup are: {Digital Output} and {LPCM
Output}.
A In ‘Audio Setup Page’, press S T to
select { Digital Audio Setup }, then
press X.
D Use S T to select a setting and press
OK to confirm.
B Press S T to select an item, then press
X to access.
Example: { On }
ꢁThe setting is selected and setup is
complete.
C Use S T to select a setting and press
OK to confirm.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
35
01-49_dvp3160K_55_eng_2.indd 35
2007-03-30 3:15:37 PM
DVD Menu Options (continued)
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
Sound Mode
The options included in Sound Mode
Setup are {3D}, {Movie Mode}, {Music
Mode}.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
A In ‘Audio Setup Page’, press S T to
select { Sound Mode }, then press X.
B Press S T to select an item, then press
X to access.
{ PCM }
C Use S T to select a setting and press
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
OK to confirm.
3D
This function provides a virtual surround
sound experience using just two
speakers.
{ Off }
ꢁ{ Off } – { Living Room } – { Hall }
– { Arena } – { Church }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
Movie Mode
Provides various Movie sound effects.
ꢁ{ Off } – { Sci-Fic } – { Action } –
{ Drama } – { Concert }
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Music Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favorite music.
Provides various Music sound effects.
ꢁ{ Off } – { Digital } – { Rock } –
{ Classic } – { Jazz }
{ 48K }
Playback a disc recorded at the sampling
rate of 48kHz.
{ 96K }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
36
01-49_dvp3160K_55_eng_2.indd 36
2007-03-30 3:15:38 PM
DVD Menu Options (continued)
CD Upsampling
Night Mode - turning on/off
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A In ‘Audio Setup Page’, press S T to
select { CD Upsampling }, then press
X.
A In ‘Audio Setup Page’, press S T to
select { Night Mode }, then press X.
{ On }
{ Off }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
Select this to disable CD Upsampling.
{ 88.2 kHz (x2) }
Select this to convert the sampling rate of
the CDs twice higher than the original.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
{ 176.4 kHz (x4) }
Select this to convert the sampling rate of
the CDs four times higher than the
original.
B Use S T to select a setting and press
OK to confirm.
B Use S T to select a setting and press
OK to confirm.
Tip:
– CD Upsampling feature is only applicable
to stereo output setting when playing CD
disc.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
37
01-49_dvp3160K_55_eng_2.indd 37
2007-03-30 3:15:38 PM
DVD Menu Options (continued)
TVType
Using theVideo setup menu
This menu contains the options for
selecting the color system that matches
the connected TV. For details, see page
19.
A Press SETUP on the remote control.
ꢁThe system setup menu appears.
Video Setup Page
Setting theTV Display
TV Type
The picture shape can be adjusted to fit
your TV and the format must be available
on the playback disc. Otherwise, the TV
display will not affect the picture during
playback.
TV Display
Progressive
Picture Setting
A In ‘Video Setup Page’, press S T to
select { TV Display }, then press X.
B Press W X to select { Video Setup
{ 4:3 Pan Scan }
Select this if you
Page }.
have a normal
TV and want
both sides of the
picture to be
C Press S T to select an item, then press
X to access.
Example: { TV Type }
ꢁThe options for the selected item
appears.
trimmed or formatted on the TV screen.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
{ 4:3 Letter Box }
Select this if you have a
normal TV. A ‘wide-
screen’ display with
black bars on the top
and bottom will be
displayed on the TV screen.
D Use S T to select a setting and press
OK to confirm.
Example: { NTSC }
ꢁThe setting is selected and setup is
complete.
{ 16:9 }
Select this for
wide-screen TV
(frame ratio
16:9).
E To exit, press SETUP.
B Use S T to select a setting and press
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
38
01-49_dvp3160K_55_eng_2.indd 38
2007-03-30 3:15:38 PM
DVD Menu Options (continued)
Progressive
Picture Setting
In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player’s YPbPr jacks
to your TV that supports the progressive
video input. Otherwise, a distorted
This DVD player provides four
predefined sets of picture color settings.
A In ‘Video Setup Page’, press S T to
select { Picture Setting }, then press X.
{ Standard }
Select this for a preset standard picture
setting.
picture will appear on the TV. For proper
progressive scan set up, see page 18.
{ Vivid }
A In ‘Video Setup Page’, press S T to
Select this to make the picture brighter.
select { Progressive }, then press X.
{ Cool }
{ Off }
Select this to make the picture softer.
To disable Progressive Scan function.
{ Personal }
{ On }
Select this to personalize your picture
color by adjusting the brightness,
contrast, tint and color (saturation).
To enable Progressive Scan function.
B Use S T to select a setting and press
OK to confirm.
B Use S T to select a setting and press
ꢁFollow the instructions shown on the
TV screen to confirm the selection (if
any).
ꢁIf a distorted picture appears on the
TV screen, wait for 15 seconds for
auto recovery.
OK to confirm.
C If you select {PERSONAL}, then proceed
to steps D~G.
ꢁThe ‘personal picture setup’ menu
appears.
Personal Picture Setup
Brightness
Contrast
Tint
0
0
0
0
Color
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
39
01-49_dvp3160K_55_eng_2.indd 39
2007-03-30 3:15:39 PM
DVD Menu Options (continued)
D Press S T to highlight one of the
Using the Preference setup
menu
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
A Press STOP Ç twice to stop playback,
(if any), then press SETUP on the
remote control.
CONTRAST
ꢁThe system setup menu appears.
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
Preference Page
Audio
Subtitle
Disc Menu
Parental
PBC
Mp3 / Jpeg Nav
Password
TINT
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOR
Increase the value to enhance the color
in your picture or vice versa. Choose
zero (0) to balance the color.
B Press W X to select { Preference
Page }.
C Press S T to select an item, then press
X to access.
E Press W X to adjust the setting that best
suits your personal preference.
Example: { Parental }
ꢁThe options for the selected item
appears.
F Repeat steps D~E for adjusting other
color features.
G Press OK to confirm.
ꢁIf the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to confirm.
Example: { 8 Adult }
ꢁThe setting is selected and setup is
complete.
E To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
40
01-49_dvp3160K_55_eng_2.indd 40
2007-03-30 3:15:39 PM
DVD Menu Options (continued)
Rating Explanations
Subtitle/Audio/Disc Menu
{ 1.Kid Safe }
Childsafe; acceptable for viewers of all
ages.
These menus contains various language
options for audio, subtitle and disc menu
which may be recorded on the DVD. For
details, see page 20.
{ 2. G }
General Audience; recommended as
acceptable for viewers of all ages.
Parental
Depending on the DVD, you may be
asked to change the parental level while
playing the disc. The rating levels are
from 1 to 8 and are country dependent.
You can prohibit the playing of certain
discs that are not suitable for your
children, or have certain discs played with
alternative scenes.
{ 3. PG }
Parental Guidance suggested.
{ 4. PG – 13 }
Unsuitable for children under age 13.
{ 5. PG – R }
Parental Guidance; recommended that
parents restrict children under 17 from
viewing.
A In ‘Preference Page’, press T to select
{ Parental }, then press X.
{ 6. R }
Restricted; recommended only when
supervised by a parent or adult guardian.
Preference Page
Audio
Subtitle
Disc Menu
Parental
PBC
Mp3 / Jpeg Nav
Password
1 KID SAFE
2 G
3 PG
4 PG13
5 PGR
6 R
{ 7. NC – 17 }
No Children under age 17; not
recommended viewing for children under
age 17.
7 NC17
{ 8. Adult }
Mature Material; should be viewed only
by adults due to graphic sexual material,
violence or language.
B Use S T to select a rating level and
press OK to confirm.
ꢁSelect { 8 Adult } to disable parental
level and allow all discs to play.
Tips:
– This feature will not limit viewing if the
disc manufacturer did not code the disc.
– VCD, SVCD, CD have no level indication,
so parental control has no effect on these
type of discs. This also applies to most illegal
DVDs.
C Use the alphanumeric keypad 0-9 to
enter the six-digit password (see page 42
‘Changing the Password’), then press OK
to confirm.
ꢂDVDs that are rated higher than the level
you selected will not play unless you
enter your six-digit password.
– Some DVDs are not coded with a rating
though the movie rating may be printed on
the disc cover. The rating level feature does
not prohibit play of such discs.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
41
01-49_dvp3160K_55_eng_2.indd 41
2007-03-30 3:15:40 PM
DVD Menu Options (continued)
PBC
Changing the Password
You can set the PBC to {On} or {Off}.
This feature is available only on SVCD or
Video CD 2.0 with playback control
(PBC) feature. For details, see page 27.
You need to enter your six-digit
password to play a prohibited disc or if
prompted for a password. The same
default password is used for both
Parental and Disc Lock.
MP3/JPEG Menu
A In ‘Preference Page’, press S T to select
{ Password }, then press X to select
{ Change }.
MP3/JPEG Navigator can be set only if
the disc is recorded with menu. It allows
you to select different display menu for
easy navigation.
B Press OK and the menu appears on the
TV screen.
A In ‘Preference Page’, press S T to select
{ MP3/JPEG Nav }, then press X.
Old Password
New Password
Confirm PWD
{ Without Menu }
Select this to display all the files
contained in the MP3/Picture CD.
OK
{ With Menu }
Select this to display only the folder
menu of the MP3/Picture CD.
C Use the alphanumeric keypad 0-9 to
enter the six-digit password.
B Use S T to select a setting and press
ꢁWhen doing this for the first time,
enter the default password ‘136900’.
OK to confirm.
Tip:
ꢂIf you forget your old six-digit password,
– This feature is not available for selection in
USB mode.
enter the default password ‘136900’.
D Enter the new six-digit password.
E Enter the new six-digit password a
second time to confirm.
ꢁThe new six-digit password will now
take effect.
F Press OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
42
01-49_dvp3160K_55_eng_2.indd 42
2007-03-30 3:15:40 PM
DVD Menu Options (continued)
Setting the DivX® subtitle font
Restoring to the original settings
You can set the font type that supports
the recorded DivX® subtitle.
Setting the { Default } function will reset
all options and your personal settings to
the factory defaults, except your
A In ‘Preference Page’, press S T to select
password for Parental and Disc Lock.
{ DivX® Subtitle }, then press X.
A In ‘Preference Page’, press S T to select
{ Default }, then press X to select
{ Reset }.
{ Standard }
Albanian, Danish, Dutch, English, Finnish,
French, Gaelic, German, Italian, Kurdish
(Latin), Norwegian, Portuguese, Spanish,
Swedish and Turkish.
B Press OK to confirm.
ꢁAll settings will now reset to factory
defaults.
B Press OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SETUP to exit the menu item.
43
01-49_dvp3160K_55_eng_2.indd 43
2007-03-30 3:15:40 PM
Others
Software upgrade
Periodically Philips will issue software
upgrade to enhance your user
experience.
IMPORTANT!
– Power supply must not be
interrupted during upgrade!
To check the current software version of
this DVD player;
A Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
ꢁThe disc tray will open.
B Press numeric keypad ‘55’ on the
remote control.
ꢁThe file name of the software installed
in the DVD player appears on the TV
screen.
To download and install the latest
software to the DVD player;
com/welcome’ to check the availability of
the latest software upgrade.
B Download the software to a CD-R.
C Insert the CD-R to the disc slot.
ꢁThe menu appears on the TV screen.
Upgrade File Detected
Upgrade?
Press Play to start
D Press PLAY/PAUSE u to download
the latest software in the DVD player.
ꢁThe DVD player will re-start
automatically once the download
complete.
44
01-49_dvp3160K_55_eng_2.indd 44
2007-03-30 3:15:40 PM
Specifications
TV STANDARD(PAL/50Hz)(NTSC/60Hz)
Number of lines 625 525
Playback Multistandard(PAL/NTSC)
AUDIO PERFORMANCE
DA Converter
DVD
24 bit, 192 kHz
fs 96 kHz
fs 48 kHz
fs 48 kHz
4Hz- 44kHz
4Hz- 22kHz
4Hz- 22kHz
VIDEO PERFORMANCE
SVCD
Video DAC
YPbPr
Video Output
12 bit, 108 MHz
0.7 Vpp ~ 75 ohm
1Vpp ~ 75 ohm
fs 44.1kHz 4Hz- 20kHz
fs 44.1kHz 4Hz- 20kHz
> 90 dB
CD/VCD
Signal-Noise (1kHz)
Dynamic range(1kHz)
Crosstalk (1kHz)
Distortion/noise (1kHz)
MPEG MP3
> 80 dB
> 70 dB
> 65 dB
MPEG Audio L3
VIDEO FORMAT
Digital
MPEG 2 for DVD,SVCD
Compression
MPEG 1 for VCD
DivX®
CONNECTIONS
DVD
50Hz
60Hz
720 pixels
480 lines
YPbPr Output
Video Output
Audio Output(L+R)Cinch (white/red)
Cinch 3x
Cinch (yellow)
Horiz. resolution 720 pixels
Vertical resolution 576 lines
Digital Output
1 coaxial
VCD
50Hz
60Hz
352 pixels
240 lines
IEC60958 for CDDA / LPCM
IEC61937 for MPEG 1/2,
Dolby Digital
Horiz. resolution 352 pixels
Vertical resolution 288 lines
AUDIO FORMAT
CABINET
Digital
MPEG/ AC-3/
PCM
compressed
Digital
Dimensions (w x h x d)
Weight
360 x 37 x 210 mm
Approximately 2 kg
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
MP3(ISO 9660) 96, 112, 128,
256, 320kbps &
POWER CONSUMPTION
Power Supply Rating
110V – 240V;
50/60Hz
< 10 W
variable bit rate
fs, 32, 44.1, 48 kHz
Analog Sound Stereo
Dolby Surround compatible downmix from Dolby
Digital multi-channel sound
Power consumption
Power consumption in
Standby mode
< 1 W
45
01-49_dvp3160K_55_eng_2.indd 45
2007-03-30 3:15:40 PM
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
Philips for help.
Problem
Solution
No power.
–
Press STANDBY-ON button on the front of the DVD
player to turn on the system.
–
–
Make sure the AC outlet has power.
Remote control does not work.
Aim the remote control directly at the sensor on the front
of the DVD player (not towards TV).
–
Remove any obstacles between DVD player and the remote
control.
–
–
Batteries are weak, replace the batteries.
Check the polarities of the batteries are as indicated on the
remote control ( signs).
No picture.
–
Turn on your TV and set to the correct Video In channel
for the DVD player. You may go to Channel 1 on your TV,
then press the channel down button on your TV’s remote
control until you see the TV program.
–
–
Check the video connection between the DVD player and
the TV.
The disc does not match with the TV color system standard
(PAL/NTSC).
The disc is dirty, clean the disc.
Sometimes a small amount of picture distortion may
appear. This is not a malfunction.
The picture is distorted or black &
white during playback.
–
–
–
To deactivate progressive scan function manually;
1) Turn off your TV progressive scan mode (or set to
interlaced mode)
2) Press OPEN/CLOSE to open the DVD player disc tray.
3) Press the alphanumeric keypad ‘1’ for few seconds.
–
–
Check the audio connections, the red and white jacks are
connected correctly.
Set the Digital output correctly, based on the equipment you
connected to the DVD player.
No sound.
–
–
–
Insert the disc with the label facing up.
Wrong region code.
Wrong disc type. Read chapter “Playback from Disc -
Playable discs” for details.
Disc does not play.
–
–
Make sure the disc is not scratched or warped. Clean the
disc or replace a new one.
Check if the disc is defective by trying another disc.
–
–
The aspect ratio is fixed on the DVD disc.
Depending on the TV, it may not be possible to change the
aspect ratio.
The aspect ratio of the screen cannot
be changed.
46
01-49_dvp3160K_55_eng_2.indd 46
2007-03-30 3:15:40 PM
Troubleshooting (continued)
Problem
Solution
–
–
Press STOP button twice before selecting the setup/system
menu.
Depending on the disc availability, some menu items cannot
be selected.
Not able to select some items in the
setup/system menu.
–
–
Insert a readable disc with the playback side facing down.
Check the disc type, color system (PAL/NTSC) and region
code.
The DVD player does not start
playback.
–
–
–
Check for any scratches or smudges on the disc.
Press SETUP to turn off the setup menu screen.
You may need to enter the password in order to change the
parental rating level or to unlock the disc for playback.
Moisture may have condensed inside the system. Remove the
disc and leave the system turned on for about an hour.
Disconnect the power cord from the power outlet for a few
minutes. Reconnect the power cord and try to operate again
as usual.
–
–
–
–
Check the disc for fingerprint/scratches and clean with a soft
cloth wiping from center to edge.
Picture freezes momentarily during
playback.
Check that the output of the video signal is turn to
{ YPbPr }.
Unable to select Progressive Scan on/
off.
–
–
–
Check that the DivX® file is encoded in ‘Home Theatre’
mode with DivX® 5.x encoder.
Unable to play DivX® movies.
Check that the DivX® movie downloaded is a complete file.
No sound during DivX® movies
playback.
The audio codec may not be supported by this DVD player.
An DivX® movies does not repeat.
–
Check that file size of the movie does not exceed the file size
of the disc during downloading.
Certain DivX® files does not play or
are skipped.
–
–
Make sure the file name extension is correct. You can check
this using a computer with CD-ROM.
The player is designed to playback DVD, VCD, CD audio,
MP3 and DivX® discs only. Other digital audio formats such
as liquid audio, RM (RealMedia), WAV or non-audio files like
‘.doc’, ‘.txt’, ‘.pdf’ are not supported.
–
–
Try to play the problem DivX® files, on a computer. If they
do not work, the source file appears to be corrupt.
Try to download the file again from a different source, or if
you have created the file yourself, create the file again and
make sure the settings are correct.
–
–
–
The USB flash drive format is not compatible with the DVD
player.
Drive is formatted with a different file system. (e.g. NTFS)
The contents of the USB flash drive
cannot be read
Big file size or high solution USB flash driver takes longer
time to read and display on the TV screen.
Slow operation of the USB flash drive
47
01-49_dvp3160K_55_eng_2.indd 47
2007-03-30 3:15:41 PM
Frequently Asked Questions (USB)
Why does it take so long to display the
contents on my USB device?
What types of file does the player
support?
We support only FAT16 and FAT32, not
NTFS.
–
This could be due to the large numbers
of files (>500 files/folders) or size of the
files (>1MB.)
–
Why does the file name appear to be
different from what was displayed on my
computer (e.g. from “Good Bye. jpg” to
“Good_B~1.jpg”)?
–
There could be other non-supported files
in the device that the system is trying to
read/display.
What if un-supported devices (e.g. USB
mouse, keyboards) are plugged into
the player?
–
The length of the file name is restricted
by the file system of the device (FAT16),
which only supports eight (8) characters.
The computer may be able to display the
full file name as the operating system can
convert the file system.
–
The device may cause the player to be
unstable. Remove the unsupported
device and unplug the mains cord. Wait
for a few minutes before reconnecting
the mains cord and power on the player
again.
–
Is simultaneous USB and Disc playback
possible?
–
This is not possible due to memory
limitation. In addition, a different user
interface will be needed in order to
function and in order to be simple
enough to use.
What happens when I plug in a USB
HDD?
–
HDD is not supported as the large
storage capacity makes navigation very
difficult. Transfer the music files (mp3)
and photos (jpg) into a flash drive.
Why can’t I rotate the pictures in my
device?
Why does the system fail to detect my
USB portable music player?
–
In order to rotate the pictures in the
USB device, the picture must contain
EXIF information, stored by most digital
cameras. This EXIF information may
have been removed when you edit or
copy the picture from other devices using
editing programs.
–
The portable music player may require
propriety software that is bundled with
our player in order to access the
contents (eg. playlist.)
Why can’t some devices be playback
from USB Port on my player?
Why can’t the player play some of my
music files, photos or movies?
–
–
USB Port only offer 500mA current,
could not power up HDD players which
require more current.
The music files may not be playable
because of different formats and encoding
bit-rates. Similarly, the photos may be of
low resolution or too high resolution for
the player to support.
–
Device which shows USB Mass Storage
Device might actually be USB Hub when
detect in USB analyser.
–
–
Devices in NTFS format can’t be
supported.
Devices require drivers to be installed
will not supported by this player. They
are not UMS or MTP devices, which does
not require any driver installation or start
up disc. When in UMS or MTP mode, the
device is treated as an external HDD or
portable device.
48
01-49_dvp3160K_55_eng_2.indd 48
2007-03-30 3:15:41 PM
Glossary
Analog: Sound that has not been turned into
numbers. Analog sound varies, while digital sound has
specific numerical values. These jacks send audio
through two channels, the left and right.
MP3: A file format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion Picture
Experts Group 1 (or MPEG-1) Audio Layer 3. By
using MP3 format, one CD-R or CD-RW can contain
about 10 times as much data volume as a regular CD
can.
Aspect ratio: The ratio of vertical and horizontal
sizes of a displayed image. The horizontal vs. vertical
ratio of conventional TVs. is 4:3, and that of wide-
screens is 16:9.
Parental Control: A function of the DVD to limit
playback of the disc by the age of the users according
to the limitation level in each country. The limitation
varies from disc to disc; when it is activated, playback
will be prohibited if the software’s level is higher than
the user-set level.
AUDIO OUT Jacks: Jacks on the back of the DVD
System that send audio to another system (TV,
Stereo, etc.).
Bit Rate: The amount of data used to hold a given
length of music; measured in kilobits per seconds, or
kbps. Or, the speed at which you record. Generally,
the higher the bit rate, or the higher the recording
speed, the better the sound quality. However, higher
bit rates use more space on a Disc.
PCM (Pulse Code Modulation): A system for
converting analog sound signal to digital signal for
later processing, with no data compression used in
conversion.
Playback control (PBC): Refers to the signal
recorded on video CDs or SVCDs for controlling
reproduction. By using menu screens recorded on a
Video CD or SVCD that supports PBC, you can enjoy
interactive-type software as well as software having a
search function.
Chapter: Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is composed
of several chapters. Each chapter is assigned a
chapter number enabling you to locate the chapter
you want.
Progressive Scan: It displays all the horizontal lines
of a picture at one time, as a signal frame. This
system can convert the interlaced video from DVD
into progressive format for connection to a
progressive display. It dramatically increases the
vertical resolution.
Component Video Out Jacks: Jacks on the back
of the DVD System that send high-quality video to a
TV that has Component Video In jacks (R/G/B, Y/Pb/
Pr, etc.).
Disc menu: A screen display prepared for allowing
selection of images, sounds, subtitles, multi-angles, etc
recorded on a DVD.
Region code: A system for allowing discs to be
played back only in the region designated beforehand.
This unit will only play discs that have compatible
region codes. You can find the region code of your
unit by looking on the product label. Some discs are
compatible with more than one region (or ALL
regions).
Digital: Sound that has been converted into
numerical values. Digital sound is available when you
use the DIGITAL AUDIO OUT COAXIAL or
OPTICAL jacks. These jacks send audio through
multiple channels, instead of just two channels as
analog does.
DivX® 3.11/4.x/5.x/6.0: The DivX® codec is a
patent-pending, MPEG-4 based video compression
technology, developed by DivX® Networks, Inc., that
can shrink digital video to sizes small enough to be
transported over the internet, while maintaining high
visual quality.
Title: The longest section of a picture or music
feature on DVD, music, etc., in video software, or the
entire album in audio software. Each title is assigned a
title number enabling you to locate the title you want.
TV OUT jack: Jack on the back of the DVD System
that sends video to a TV.
WMA: Windows Media Audio. Refers to an audio
compression technology developed by Microsoft
Corporation. WMA data can be encoded by using
Windows Media Player version 9 or Windows Media
Player for Windows XP. Files are recognized by their
file extension “WMA.”
Dolby Digital: A surround sound system developed
by Dolby Laboratories containing up to six channels
of digital audio (front left and right, surround left and
right, center and subwoofer).
JPEG: A very common digital still picture format. A
still-picture data compression system proposed by the
Joint Photographic Expert Group, which features
small decrease in image quality in spite of its high
compression ratio.
49
01-49_dvp3160K_55_eng_2.indd 49
2007-03-30 3:15:41 PM
|