Color TV with built-in VCR
CCA134AT
O wner’s Manual
Im portant!
Return your W arranty Registration
Card within 10 days. See why inside.
TM
Introduction 3
W elcom e to your TV/VCR owner’s m anual.
This manual has seven sections: Setting Up Your TV/VCR; Description of Controls; Basic Operations; Recording Options;
Playing Options; Additional Features; and Information You May Need. The instructions explain all of the TV/VCR’s features,
which are listed below.
Features
• A-B Repeat Play
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Blue Background
• Closed Caption
• Daylight-Savings Time
• Index Search
• 19 micron head, improves the picture quality during playback of SLP tapes
• On-Screen displays in English or Spanish
• On-Screen Menu Programming, accessible with
remote control or front panel buttons
• One-Touch Recording
• Remote Control with capability to operate a Cable Box
or Direct Broadcast System
• Remote Locator
• Repeat Play
• Skip Search
• Sleep Timer
• SmartClockTM
• SmartLockTM
• Smart Picture
• Timer Recording
• VCR Plus+ Programming System
• Wake Up Timer
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to
rain or moisture.
Federal Communications Commission (FCC) Warning: Any unauthorized
changes or modifications to this equipment void the user’s authority to
operate it.
Helpful Hints
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This TV/VCR, equipped with a High Quality (HQ) system, is compatible with
existing Video Home System (VHS) equipment.
• Before doing anything else, record
the TV/VCR’s model and serial num-
bers in the spaces provided on page
two. These numbers will help us
assist you if you ever call for help.
• Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that needs
to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of
as small chemical waste.
Note to the Cable TV System Installer: This reminder is provided to
call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding –
in particular, specifying that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as pos-
sible.
As an ENERGY STAR® Partner, Philips Consumer Electronics
Company has determined that this product meets the ENERGY
STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. reg-
istered mark.
Using products with the ENERGY STAR® label can save energy. Saving energy
reduces air pollution and lowers utility bills.
SmartClockTM and SmartLockTM are trademarks of Philips Consumer
Electronics Company.
Please find out about the local regu-
lations on disposal of your old prod-
uct, batteries, manual, and packag-
ing whenever you replace existing
equipment.
Copyright 1999 Philips Consumer Electronics Company. All rights reserved.
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufactured under
license from Gemstar Development Corporation.
This owner’s manual is made of recycled paper.
m
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting the Remote to Operate a Cable Box/DBS . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Basic O perations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Recording O ptions
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-37
Setting Up the VCR Plus+ Programming System . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Timer Recording With the VCR Plus+ Programming System . . . . . . . . . . . . . . . . . .40-41
Playing O ptions
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Additional Features
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-51
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Smart Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Remote Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Inform ation You May Need
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64-65
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Before Using the TV/VCR 5
Putting Batteries in the Rem ote Control
1
1
Rem ove the battery com partm ent lid on the bottom of
the rem ote control by pressing in the tab, then pulling up
the lid.
2
3
2
Place three AA batteries inside the battery com partm ent
with their and ends aligned as indicated.
+
–
3
Replace the battery com partm ent lid.
Erasure Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
1
2
1
To prevent accidental erasure, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Rem ote Control
● Point the remote control at the TV/VCR’s remote sensor, then
press the COMBI button when using the remote control to
operate the TV/VCR. Point the remote control at the Cable
Box/DBS, then press the CABLE/DBS button when using the
remote control to operate the Cable Box/DBS.
● Do not put objects between the remote control and the TV/VCR.
TV/VCR Maintenance
● In this TV/VCR, use only tapes with the
mark. The use of
other tapes may result in poor picture quality and excessive
deposits on the video heads, which may not be covered by the
warranty if damage occurs.
● Make sure any light adhesive stick-on notes are removed from the
video cassette tape before putting the tape in the TV/VCR.
Removable labels like these can jam the TV/VCR.
● Periodic maintenance is required to maintain your TV/VCR’s excel-
lent performance. This TV/VCR has an automatic head cleaning
system. However, the video heads will eventually require cleaning
or replacement. Only an authorized service center should perform
this service.
Helpful Hints
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.
6 Hooking Up the TV/VCR
1
Hook up your TV/VCR using one of the connections shown.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
A.
Hooking Up Your TV/VCR
W ith a Cable Signal or
O utdoor Antenna
ANT.
ANT.
Connect the Cable signal to
the IN Jack on the Cable Box.
B.
Hooking Up Your TV/VCR
W ith a Cable Box
Connect an RF coaxial cable (75-
To view any channel, set the
TV/VCR to the Cable Box output
channel (channel 03 or 04). Then,
select channels at the Cable Box.
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
ANT(enna) Jack on the TV/VCR.
IN
OUT
RF coaxial cable
(not supplied)
ANT.
ANT.
Rod Antenna
(not supplied)
C.
Hooking Up Your TV/VCR
W ith an Indoor Antenna
To install a rod antenna (not sup-
plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
ANT.
ANT.
Hooking Up the TV/VCR (cont’d) 7
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Cam corder)
You may need this connection
if you want to copy tapes.
Details are on page 32.
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO Jack
on the front of the TV/VCR.
AUDIO/VIDEO OUT
Jacks on VCR
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
AUDIO VIDEO
AUDIO
VIDEO
STOP/EJECT
REW
PLAY
F.FWD
REC/OTR
CHANNEL
VOLUME
POWER
E
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
AUDIO/VIDEO Jacks
on front of TV/VCR
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in the TV/VCR.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885.
• Audio and video cables are not supplied.
Bent pin
Crooked Pin
Straight Pin
Plug
Cable
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure batteries are in the
remote control and the TV/VCR is hooked up correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
POWER
EJECT
1
2
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
1
PLAY
Press the PO W ER button. The TV/VCR will come on and the
screen shown below will appear.
REW
F.FWD
4
5
STOP
SELECT LANGUAGE
STATUS/EXIT
> ENGLISH
ON
3
ESPAÑOL
1
4
2
5
8
0
3
6
9
SELECT KL OR
PRESS MENU TO CONTINUE
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
2
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
Press the PLAY/K button or the STO P/L button to select
TRACKING
F.ADV
English or Spanish on-screen displays and m enus.
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Press the MENU button. The screen shown below will appear.
CONNECT ANTENNA OR CABLE
TO TVCR
THEN PRESS
B
TO END PRESS EXIT
Helpful Hints
• If you do not see any on-screen dis-
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine-10 to select a language and
set up channels.
• To skip step 2, press the MENU
button. All on-screen displays will be
in English. To skip step 4, press the
STATUS/EXIT button. Channels will
not be set up, and CHANNELS
NOT SET will appear on the screen
briefly.
4
Press the F.FW D/B button to begin autom atic channel
setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on the screen
briefly. Then the TV/VCR will go to the lowest channel pro-
grammed.
(If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on the
screen. Connect an antenna or cable to the ANT(enna) jack on
the TV/VCR, then press the F.FWD/B button again. You may
need to follow the steps on page 10 instead.)
• You cannot set up channels if you
are using a Cable Box.
5
Use the CH(annel) m/n button or the Num ber buttons
on the rem ote control to select a TV/VCR channel. Use
the VO L(um e) m/n button to adjust the sound.
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. When you select chan-
nel 00, A/V IN will appear on the
screen briefly. Press the CH(annel)
m/n button or the Number but-
tons to select another channel.
Language Selection 9
Follow the steps below to change the language of the on-screen
displays and menus.
2-4
1
POWER
EJECT
Press the CO MBI button, then press the MENU button.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PLAY
REW
F.FWD
REMINDER
STOP
BRIGHTNESS
STATUS/EXIT
1
5
2
1
4
2
5
8
0
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
CH.
7
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
A.CH
VOL.
CABLE/DBS
COMBI
VOLUME BAR
[ON]
VCR PLUS+
/ENTER
SET CLOCK
VAR.SLOW
MUTE
SLOW
REMOTE LOCATOR
TRACKING
F.ADV
SELECT KL CHOOSE
TO END PRESS EXIT
B
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Press the PLAY/▲ button or the STO P/▼ button to
choose SELECT LANGUAGE. Then, press the F.FW D/B
button.
SELECT LANGUAGE
> ENGLISH
ESPAÑOL
ON
SELECT KL
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
ENGLISH or ESPAÑO L (Spanish).
Helpful Hint
• If you accidentally select Spanish
and need English on-screen displays
and menus:
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/o button or the
STOP/p button to select PREPARA-
CION, then press the F.FWD/B
button.
5
Press the STATUS/EXIT button.
3) Press the PLAY/o button or the
STOP/p button to select SELEC-
CION IDIOMA, then press the
F.FWD/B button.
4) Press the PLAY/o button or the
STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
2-3
1
POWER
EJECT
Press the CO MBI button, then press the MENU button.
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PLAY
REW
F.FWD
REMINDER
BRIGHTNESS
STOP
STATUS/EXIT
1
4
1
4
2
5
8
0
3
6
9
2
CH.
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP, then press the F.FW D/B button.
7
PRIMARY SETUP
A.CH
VOL.
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
VOLUME BAR
[ON]
SET CLOCK
TRACKING
F.ADV
REMOTE LOCATOR
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
SELECT KL CHOOSE
TO END PRESS EXIT
B
3
Press the PLAY/▲ button or the STO P/▼ button to select
AUTO PRO GRAMMING, then press the F.FW D/B but-
ton. AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable chan-
nels automatically, and the TV/VCR will memorize its available
Wait for the TV/VCR to set up
channels.
4
W ait for a few m inutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number placed in the TV/VCR’s memory will
appear on the screen. Now, when you press the CH(annel) m/n
button, you will scan only through channels you receive.
Helpful Hints
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
Automatic Channel Setup (cont’d) 11
Adding/Deleting Channels
2,4
1
Press the CO MBI button, then press the MENU button.
POWER
EJECT
TO ADJUST PRESS { /
B
SLEEP/WAKE UP
SPEED
MEMORY
CH123
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
REC/OTR
PAUSE/STILL
EXIT
PLAY
PRIM. SETUP
VCR PROGRAM
REW
F.FWD
STOP
STATUS/EXIT
2
1
5
3
Press the PLAY/o button or the STO P/p button to select
CHANNEL.
1
4
2
5
8
0
3
6
9
CH.
TO ADJUST PRESS { /
B
7
CH123
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
A.CH
VOL.
CABLE/DBS
COMBI
EXIT
PRIM. SETUP
VCR PROGRAM
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Press the CH(annel) m/n button to select the channel
you want to add or delete.
TO ADJUST PRESS { /
B
CH23
SAVED
>
CHANNEL
SMARTLOCK
REVIEW
Helpful Hint
EXIT
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the COMBI button, then
press the MENU button.
PRIM. SETUP
VCR PROGRAM
4
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/{ button to see the
previous screen of channels.
Press the F.FW D/B button or the REW (ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
5) Press the STATUS/EXIT button
once or twice.
12 Setting the Clock
There are three ways to set the clock: Manually, with Automatic
PBS Channel Selection, or with Manual PBS Channel Selection.
With manual clock setting, you tell the TV/VCR the current time.
With Automatic or Manual PBS Channel Selection, the TV/VCR
gets the time from your local PBS station.
If you use either Manual PBS Channel Selection or Automatic PBS
Channel Selection, follow the steps on page 19 to have the
TV/VCR maintain the clock according to your Time Zone.
Cable Box users m ust set the clock m anually.
To set the clock manually, follow the steps on pages 12-13. To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14-15. To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16-17.
2-3
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
PLAY
REW
F.FWD
STOP
Before you begin, make sure:
● The TV/VCR is hooked up and turned on.
STATUS/EXIT
● Channels are set up.
● Tape playback is stopped. You can not use Automatic or Manual
PBS Channel Selection during tape playback.
1
1
4
2
5
8
0
3
6
9
CH.
● You make each entry within 60 seconds of the previous entry.
7
A.CH
VOL.
CABLE/DBS
COMBI
Manual Clock Setting
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
1
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
Press the CO MBI button, then press the MENU button.
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS
B
2
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
[ON]
SET CLOCK
REMOTE LOCATOR
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
3
• Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.
• To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num-
ber you want to correct is flashing.
Then enter the correct number.
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
Setting the Clock (cont’d) 13
4
5-6
Press the PLAY/▲ button or the STO P/▼ button to select
SET MANUAL CLO CK, then press the F.FW D/B button.
POWER
EJECT
SET MANUAL CLOCK
SLEEP/WAKE UP
SPEED
MEMORY
TIME – – : – –
REC/OTR
PAUSE/STILL
DATE – – / – – / – –
PLAY
REW
F.FWD
TO END PRESS EXIT
4
7
STOP
STATUS/EXIT
5
1
4
2
5
8
0
3
6
9
Press two Num ber buttons for the hour(s) and two
Num ber buttons for the m inute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
CH.
7
SET MANUAL CLOCK
A.CH
VOL.
CABLE/DBS
COMBI
TIME
09 : 30 PM
MONTH
– – / – – / – –
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
6
Press two Num ber buttons for the m onth, two Num ber
buttons for the day, and two Num ber buttons for the
year. For example, for July 1, 1999, press 07, 01, 99. The day of
the week will appear automatically.
SET MANUAL CLOCK
TIME
09 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
Helpful Hint
• This VCR is ready for the year 2000
and the years beyond. To set a date in
the year 2000, enter 00 for the year
in step 6.
14 Setting the Clock (cont’d)
Autom atic PBS Channel Selection
1
Press the CO MBI button, then press the MENU button.
2-3
POWER
EJECT
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
REMINDER
BRIGHTNESS
PLAY
REW
F.FWD
4
STOP
2
STATUS/EXIT
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
1
4
2
5
8
0
3
6
9
PRIMARY SETUP
CH.
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
7
VOLUME BAR
[ON]
A.CH
SET CLOCK
VOL.
REMOTE LOCATOR
CABLE/DBS
COMBI
SELECT KL CHOOSE
B
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TO END PRESS EXIT
1
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button. If O FF appears beside AUTO CLO CK, press the
F.FW D/B button so that O N appears to the right of
AUTO CLO CK, then press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Setting the Clock (cont’d) 15
Wait for the TV/VCR to find
the time.
5
6
Press the PLAY/▲ button or the STOP/▼ button to select
SET PBS CH. AUTO. Then, press the F.FW D/B button.
SET AUTO CLOCK
POWER
EJECT
TIME
– – : – –
DATE
– – / – – / – –
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
NOW SEARCHING
TO END PRESS EXIT
PAUSE/STILL
PLAY
5
REW
F.FWD
STOP
6
STATUS/EXIT
NOW SEARCHING flashes on the TV/VCR screen.
However, you may see the message: “PLEASE TURN OFF TO
SET AUTO CLOCK. PLEASE WAIT SEVERAL MINUTES.”
If this message appears, turn off the TV/VCR for several minutes.
When you turn on the TV/VCR, the time will be set. If the time is
not set, repeat steps 1-5. Or, follow the steps on pages 12-13 to
set the clock manually or pages 16-17 to set the clock with
Manual PBS Channel Selection.
7
1
4
2
5
8
0
3
6
9
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
7
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
W hen the TV/VCR finds the PBS channel, the tim e will
appear on the screen. Press the STATUS/EXIT button.
SET AUTO CLOCK
TIME
06 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO END PRESS EXIT
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen, you will be prom pted to turn off the
TV/VCR. Turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the clock will be
set.
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – –
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
Helpful Hints
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 28.
• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
2-3
1
Press the CO MBI button, then press the MENU button.
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
REC/OTR
PAUSE/STILL
PLAY
REMINDER
BRIGHTNESS
REW
F.FWD
4
STOP
STATUS/EXIT
2
1
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
1
4
2
5
8
0
3
6
9
CH.
PRIMARY SETUP
7
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
A.CH
VOL.
CABLE/DBS
COMBI
VOLUME BAR
[ON]
VCR PLUS+
/ENTER
SET CLOCK
VAR.SLOW
MUTE
SLOW
REMOTE LOCATOR
TRACKING
F.ADV
SELECT KL CHOOSE
B
SMART
PICTURE
SKIP
INDEX
TO END PRESS EXIT
SEARCH SEARCH
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If O N appears beside AUTO CLO CK, press the MENU
button. If O FF appears beside AUTO CLO CK, press the
F.FW D/B button so that O N appears to the right of
AUTO CLO CK, then press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Setting the Clock (cont’d) 17
5
Press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. MANUAL. Then, press the F.FW D/B
button. The default channel (02) flashes.
Wait for the TV/VCR to
find the time.
7
6
AUTO CLOCK (PBS) CH 02
POWER
EJECT
TIME
– – : – –
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
DATE
– – / – – / – –
PAUSE/STILL
SELECT CHANNEL NUMBER
TO END PRESS EXIT
PLAY
5
8
REW
F.FWD
STOP
STATUS/EXIT
6
Use the Num ber buttons to select your PBS station.
1
4
2
5
8
0
3
6
9
AUTO CLOCK (PBS) CH 12
CH.
TIME
– – : – –
DATE
– – / – – / – –
7
NOW SEARCHING
TO END PRESS EXIT
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
7
NOW SEARCHING flashes on the TV/VCR screen.
8
W hen the TV/VCR finds the clock data, the tim e will
appear on the screen. Press the STATUS/EXIT button.
AUTO CLOCK (PBS) CH 12
TIME
06 : 30 PM
DATE
07 / 01 / 99
THURSDAY
TO END PRESS EXIT
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/▲ button or the STO P/▼ button to
choose SELECT NEW PBS CH. Then, press the
F.FW D/B button. Repeat step 6.
● If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/▲ button or the STO P/▼ button to
select SET PBS CH. AUTO. Then, press the F.FW D/B
button. The TV/VCR will search for the PBS channel automati-
cally.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on the TV/VCR again, the time will be set.
Helpful Hints
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page 11.
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 28.
18 Daylight-Savings Time
When the Daylight-Savings Time feature is ON, the TV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Savings Time ON or OFF, follow the steps
below.
2-4
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
1
Press the CO MBI button, then press the MENU button.
PLAY
REW
F.FWD
STOP
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
STATUS/EXIT
1
REMINDER
BRIGHTNESS
5
1
4
2
5
8
0
3
6
9
CH.
7
2
A.CH
Press the PLAY/▲ button or the STO P/▼ button to select
VOL.
CABLE/DBS
COMBI
PRIM. SETUP. Then, press the F.FW D/B button.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
PRIMARY SETUP
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SEARCH SEARCH
VOLUME BAR
[ON]
SET CLOCK
REMOTE LOCATOR
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
DAYLIGHT SVG.TIME. Then, press the F.FW D/B button
so that O N or O FF appears beside DAYLIGHT SVG.
TIME (Daylight Savings Tim e).
5
Press the STATUS/EXIT button.
Time Zone 19
When you set the clock using AUTO CLOCK, specify your time zone.
The TV/VCR will maintain the clock according to your time zone.
1
Press the CO MBI button, then press the MENU button.
2-5
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REMINDER
BRIGHTNESS
REC/OTR
PAUSE/STILL
PLAY
REW
F.FWD
2
STOP
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
STATUS/EXIT
6
1
4
2
5
8
0
3
6
9
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
CH.
VOLUME BAR
[ON]
SET CLOCK
REMOTE LOCATOR
7
SELECT KL CHOOSE
B
A.CH
TO END PRESS EXIT
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
1
3
TRACKING
F.ADV
Press the PLAY/▲ button or the STO P/▼ button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/▲ button or the STO P/▼ button to select
SET TIME ZO NE. Then, press the F.FW D/B button.
SET TIME ZONE
> AUTO
ATLANTIC
[ON]
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
SELECT KL
TO CONTINUE PRESS MENU
Helpful Hints
5
• If you select AUTO at step 5, the
TV/VCR will set the clock according
to the time zone data of the PBS
station it finds.
Press the PLAY/▲ button or the STO P/▼ button to select
your tim e zone.
• You cannot select SET TIME ZONE
at step 4 if AUTO CLOCK is set to
OFF.
6
Press the MENU button, then press the STATUS/EXIT
button.
20 Setting the Remote to Operate a Cable Box/DBS
Your TV/VCR remote control m ay operate your Cable Box/DBS.
If the remote control doesn’t operate your Cable Box/DBS now,
follow the steps below to program your remote control.
Find your code.
2
1
1
POWER
EJECT
Turn on your Cable Box/DBS. Point the remote control at your
Cable Box/DBS and press the CABLE/DBS button. Then,
press the PO W ER button. If your Cable Box/DBS turns off,
try the other Cable Box/DBS buttons (see pages 24-25 for
details). If your Cable Box/DBS doesn’t turn off, or if the other
buttons don’t work, go to step 2.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
1
4
2
5
8
0
3
6
9
CH.
Find the brand of your Cable Box/DBS on the lists below
and rem em ber the two-digit num ber beside it.
7
CABLE BO X CO DES
A.CH
VOL.
..
..............
.............
26 SAMSUNG
ARCHER 01, 05, 06, 44 MAGNAVOX
05, 06,
40, 42
CABLE/DBS
COMBI
.....
CABLETENNA 01, 44 MATSUSHITA
........ .......................
VCR PLUS+
/ENTER
CABLEVIEW
04, 30,
16, 17, 97 SCIENTIFIC ATLANTA
......... ...............................
08, 09
VAR.SLOW
MUTE
SLOW
4
42, 44, 52 MOVIETIME
44 NOVAVISION
42, 44
..................
........
........................
TRACKING
F.ADV
3
CENTURY
CITIZEN
08, 09 SIGNAL
40 SL MARX
11, 46
26
06, 40, 42,
44, 52
...............
...................
.........
04, 30, NSC/NEC
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
......................
42, 44, 52 OAK
................
.........
SPRUCER........
16, 17, 97
CURTIS
08, 09 OAK SIGMA
11, 46
............
..
DIAMOND
01, 44 PANASONIC 16, 17, 97 STANDARD COMPONENTS
...........
.........
PIONEER
...............................
42, 44
EAGLE
26, 40, 62 PHILIPS
07, 23, 50
.............
......
04, 06, 30,
EASTERN/REGENCY
05, 06 STARGATE
04, 30, 42,
44, 52 TELEVIEW
................. ......
...................................
.........
28 PULSAR
04, 30,
42, 44, 52 QUEST
40, 42, 44, 52
..........
.......
06, 40, 42
GC BRAND
05, 06 TOCOM
01, 33, 34, 42
..........
................
....................
GEMINI/JASCO
04 RCA
REALISTIC
.................
16, 17, 97 UNIKA
01, 44
.................
.....
44 UNIVERSAL 42, 44, 52
44 VIDEOWAY
GENERAL ELECTRIC
.............................
......
......
01, 57 RECOTON
07, 23, 50
26, 40, 62
07, 23, 50
.....
GENERAL INSTRUMENT REGAL 14, 15, 28, 41 VIEWSTAR
..... ............
01, 02, 03, 04, 34, 83 REMBRANDT
.... .........................
ZENITH
HAMLIN 14, 15, 28, 41
01, 42, 44
.......
JERROLD
01, 02, 03,
04, 34, 83
DIRECT BRO ADCAST SYSTEM CO DES
...........
.........................
.......................
98
MAGNAVOX
94,95
RCA
97
SONY
3
Press the MUTE button.
4
W ithin 30 seconds, press the CABLE/DBS button.
Setting the Remote to Operate a Cable Box/DBS (cont’d) 21
5
POWER
EJECT
W ithin 30 seconds, press the Num ber buttons to enter
the two-digit code for your Cable Box/DBS. For example, if
you have a Zenith Cable Box, press Number buttons 2, 3.
6
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
REW
F.FWD
STOP
STATUS/EXIT
6
Repeat step 1. If the remote control works your Cable
Box/DBS, you’re finished. If the remote control still doesn’t work
your Cable Box/DBS, repeat steps 2-5, using a different code for
your brand, if available.
1
4
2
5
8
0
3
6
9
CH.
7
5
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
Helpful Hints
• Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
• The remote control may only oper-
ate some features of your Cable
Box or DBS. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
• If you can not change the channels
at the Cable Box by using the
Number buttons, press the
CABLE/DBS button before you press
the Number buttons. It may change
channels at the Cable Box.
• If you had to program the remote
control to operate your Cable Box
or DBS here, whenever you replace
the batteries in the remote control,
you will have to program the
There is no guarantee
that the rem ote control
will work your Cable
Box or DBS.
remote control again.
22 Front Panel
Cassette Com partm ent
Insert a video cassette tape here.
W ireless Rem ote Sensor
Receives a signal from your remote control
so you can operate the TV/VCR from a dis-
tance.
STO P/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the menu.
VIDEO Jack
Connect this jack to the video out jack of a
camcorder or a VCR. Details are on page 32.
AUDIO Jack
Connect this jack to the audio out jack of a
camcorder or a VCR. Details are on page 32.
EARPHO NE Jack
AUDIO
VIDEO
STOP/EJECT
REW
PLAY
F.FWD
REC/OTR
CHANNEL
VOLUME
POWER
EARPHONE
Connect earphones (not supplied) here for
personal listening.
REW (ind) Button
VO LUME o/p
Buttons
Press to adjust the
sound level.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the sam e tim e to
display the pop up
menu. Press again to
remove the pop up
menu.
When tape playback is stopped, press to
rewind the tape at high speed. During play-
back, press to rewind the tape while the pic-
ture stays on the screen. Press to change a
setting of a pop up menu item (for example,
to adjust the BRIGHTNESS). Press to return
to a previous menu.
PLAY Button
Press to play a tape. Details are on page 29.
Press to release Slow, Search or Still mode
and return to normal playback. Details are on
page 46. Press to select an item in the menu.
F.FW D Button
CHANNEL o/p
Buttons
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on the screen. Press to change a
setting of a menu item (for example, to adjust
the BRIGHTNESS).
Press to scan through
the TV/VCR channels.
During tape playback,
press to adjust the
tracking. Details are
on page 57.
REC(ord)/O TR Button
Press once to start a recording. Details are on
page 30. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 31.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the sam e tim e to
display the pop up
menu. Press again to
remove the pop up
menu.
RECO RD Light
This light appears during a recording. It flashes
slowly when the TV/VCR power is turned off
to set a timer recording. It blinks rapidly when
a recording is paused or when the power is
off for a timer recording, but there is no tape
in the TV/VCR.
PO W ER Button
Press to turn the power on or off. Press to acti-
vate the Remote Locator. Details are on page 59.
Rear Panel 23
ANT.
ANT(enna) Jack
Connect your antenna or cable here.
Details are on page six.
AC Power Cord
Connect to a standard AC outlet to
supply power to the TV/VCR.
Antenna Hole
Connect the stem of an indoor antenna
here. Details are on page six.
24 Remote Control Buttons
EJECT Button
Press to eject the tape.
SPEED Button
Press to select the recording speed (SP or SLP).
PO W ER Button
Press to turn on or off the TV/VCR, Cable Box, or Direct
Broadcast System. (You must first press the COMBI or
CABLE/DBS button.) Details are on pages five and 20-21.
POWER
EJECT
SLEEP/W AKE UP Button
Press to set the Sleep Timer. Details are on page 52. Press to set
the Wake Up Timer. Details are on page 53.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY/▲ Button
Press to play a tape. Details are on page 29. Press to release Slow,
Search or Still mode and return to normal playback. Details are on
page 46. Press to select an item in the menu.
PLAY
REW
F.FWD
MENU Button
STOP
Press to display the pop up menu. You also may use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 22.
STATUS/EXIT
Num ber Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
● Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay.
(There also may be a brief delay when you select channels 10, 11, and
12.) If you want to select channels 100 and above, enter channel num-
bers as a three-digit number. For example, to select channel 117,
press 1, 1, 7.
1
4
2
5
8
0
3
6
9
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
● Antenna Users
TRACKING
F.ADV
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 5, press 0,5. If you only press the Number
5 button, channel 5 will be selected after a brief delay. You may only
select channels 2-69.
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
A.CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
SMART PICTURE Button
Press repeatedly to select a Smart Picture mode. Details are on page 58.
TRACKING m/n Button
Press during tape playback to adjust the tracking. Details are on
page 57.
SKIP SEARCH Button
Press during playback to fast forward past 30 seconds of the tape.
Press up to six times in a row to skip up to three minutes of the
tape.
F(ram e). ADV(ance) Button
Press when in Still mode to advance the picture one frame at a time.
Details are on page 46.
SLOW Button
During tape playback, press to
view the picture in slow
INDEX SEARCH Button
Press to fast forward or rewind to the starting points of programs
that you have recorded on a tape. Details are on page 61.
motion. Details are on page 46.
CH(annel) m/n Button
Press to scan through the channels
at the Cable Box/DBS.
Remote Control Buttons (cont’d) 25
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press
again to resume recording. Details are on page 30. You cannot
pause a One-Touch Recording.
During tape playback, press to freeze the picture (still). Details are
on page 46.
MEMO RY Button
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 42. Or, press to memorize
the start and end positions on a tape when setting up A-B Repeat
Play. Details are on pages 44-45.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
REC(ord)/O TR Button
PAUSE/STILL
Press once to start a recording. Details are on page 30. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 31.
PLAY
REW
F.FWD
STOP
REW (ind)/{ Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
picture stays on the screen. Details are on page 46.
Press to change a setting of a menu item or to return to a previ-
ous menu.
STATUS/EXIT
1
4
2
5
8
0
3
6
9
CH.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status
display. Details are on page 28. Press to remove the menu.
7
A.CH
CLEAR Button
VOL.
CABLE/DBS
COMBI
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 42.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
CABLE/DBS Button
TRACKING
F.ADV
Press to operate the Cable Box or Direct Broadcast System.
VAR(iable). SLO W Button
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
During slow motion tape playback, press to vary the playback speed
from 1/6 to 1/30 of normal speed. Details are on page 46.
CO MBI Button
Press to operate the TV/VCR.
VCR PLUS+/ENTER Button
Press to set a timer recording with the VCR Plus+ programming sys-
tem. Details are on pages 38-41.
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
VO L(um e) m/n Button
Press to adjust the sound level. If you press the VOL(ume) m/n
button when the sound is muted, the sound will be restored.
Helpful Hints
STO P/▼ Button
Press to stop the tape. Press to select an item in the menu.
• Press the COMBI button before
pressing other TV/VCR buttons;
press the CABLE/DBS button before
pressing other Cable Box/DBS but-
tons.
• The buttons with a shaded descrip-
tion also may operate features of
your Cable Box/DBS.
F.FW D/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 46.
Press to change the setting of an item in the menu or press to
proceed to the next menu.
26 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, picture,
color, tint, and sharpness.
1
POWER
EJECT
Press the CO MBI button, then press the MENU button.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
TO ADJUST PRESS { /
B
PAUSE/STILL
>
BRIGHTNESS
PICTURE
COLOR
PLAY
2
4
REW
F.FWD
TINT
3
STOP
SHARPNESS
CHANNEL
STATUS/EXIT
1
1
4
2
5
8
0
3
6
9
2
CH.
Press the PLAY/▲ button or the STO P/▼ button to select
the desired control (BRIGHTNESS, for exam ple).
7
A.CH
VOL.
CABLE/DBS
COMBI
3
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
Press the REW (ind)/{ button or the F.FW D/B button to
adjust the picture control. (Refer to the chart on page 27.)
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
4
W hen you finish, press the STATUS/EXIT button.
Helpful Hints
• The on-screen menus shown on
page 27 will disappear if no adjust-
ments are made within 60 seconds.
• The original settings will probably
give you the best picture quality. To
set the picture controls to the origi-
nal settings, see page 58.
Adjusting the Picture Controls (cont’d) 27
Decrease
decreased brightness
decreased contrast
paler
Increase
increased brightness
increased contrast
more brilliant
more green
BRIGHTNESS
PICTURE
CO LO R
TINT
SHARPNESS
more purple
softer
clearer
Press the REW(ind)/{
button to decrease a
picture control. Press
the F.FWD/B button
to increase a picture
control.
AUDIO
VIDEO
STOP/EJECT
REW
PLA
CHANNEL
VOLUME
POWER
EARPHONE
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
>
BRIGHTNESS
PICTURE
COLOR
>
PICTURE
COLOR
>
TINT
TINT
SHARPNESS
CHANNEL
SHARPNESS
CHANNEL
TO ADJUST PRESS{ /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
>
>
Press the STOP/▼
button
Press the PLAY/▲
button
28 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status
display will vary. To choose the status display mode, follow the
steps below.
If you select STATUS O N, then select CO UNTER O NLY
O FF:
● Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func-
tion buttons.
If you select STATUS O N, then select CO UNTER O NLY
O N:
Current
Tape
Channel
Time
Function
12:00 AM
CH10
STOP
● Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS O FF:
● The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
SLP
M 1:23:45
Counter
and
Counter
Memory
Tape
Speed
1
Press the CO MBI button, then press the MENU button.
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
3
Press the PLAY/▲ button or the STO P/▼ button to select
O N-SCREEN MO DE, then press the F.FW D/B button.
4
Press the PLAY/o button or the STO P/p button to select
STATUS, then press the F.FW D/B button so that O N or
O FF appears beside STATUS.
ON-SCREEN MODE
> STATUS
[ON]
[OFF]
COUNTER ONLY
SELECT KL CHOOSE
B
TO END PRESS EXIT
5
If you set STATUS to O FF, go to step 6. If you set STA-
TUS to O N, press the PLAY/o button or the STO P/p
button to select CO UNTER O NLY, then press the
F.FW D/B button so that O N or O FF appears beside it.
Helpful Hint
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 54-55.
6
Press the STATUS/EXIT button.
Playing 29
Follow the steps below to play a tape.
Insert a tape in the TV/VCR.
1
1
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab has been removed, playback should start auto-
matically.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
5
2
PAUSE/STILL
2
If playback does not start autom atically, press the CO MBI
button, then press the PLAY/▲ button to start playback.
PLAY
REW
F.FWD
4
3
STOP
STATUS/EXIT
3
Press the STO P/▼ button to stop playback.
1
4
2
5
8
0
3
6
9
CH.
4
7
Press the REW (ind)/{ button to rewind the tape.
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
5
TRACKING
F.ADV
Press the EJECT button to rem ove the tape.
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
Helpful Hints
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
COMBI button, then press the
PLAY/▲ button.
• Playback features and options are
on pages 42-46.
30 Recording
Read and follow the steps below to record a TV program.
1
Press the COMBI button, then place a tape with its record
tab intact (see page five) in the TV/VCR. The power will come
on. Or, if the tape is already in the TV/VCR, press the
POW ER button to turn on the TV/VCR, if necessary.
2
POWER
EJECT
5
4
6
1
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. Details about tape speed are
given below.
PLAY
REW
F.FWD
STOP
STATUS/EXIT
3
Use the CH(annel) m/n button or the Num ber buttons to
select the channel to be recorded. (Channels cannot be
changed during recording.)
1
4
2
5
8
0
3
6
9
CH.
7
3
A.CH
VOL.
CABLE/DBS
COMBI
4
Press the REC(ord)/O TR button once to start recording.
The RECORD light will glow.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
● If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
SMART
PICTURE
SKIP
SEARCH SEARCH
INDEX
● If the tape does not have a record tab, PROTECTED CAS-
SETTE CANNOT RECORD flashes on the screen briefly. The
TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for exam ple, during com m er-
cials), press the PAUSE/STILL button. The RECORD light
will flash. To resum e recording, press the PAUSE/STILL
button again or the REC(ord)/O TR button. The RECORD
light will glow.
Helpful Hints
6
• You cannot record one channel
while watching another.
• Recording options are on pages
31-41.
To stop recording, press the STO P/▼ button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. During playback, the VCR selects the tape
speed automatically. When recording, you can change the tape
speed using the SPEED button. You cannot record in LP speed.
• You cannot record if DEFEAT
RECORDING is set to ON. (REC
DEFEATED will flash on the screen.)
Details are on page 33.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Cassette type / Playback Time
Tape Speed
SP(Standard Play)
T160
2 hrs.
40 mins.
5 hrs.
T120
T60
2 hrs.
1 hr.
LP(Long Play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
SLP(Super Long Play)
8 hrs.
One-Touch Recording 31
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours
long without setting the timer.
Press the STOP/EJECT but-
Before you begin, make sure:
ton on the TV/VCR to stop
the OTR.
● Channels are set up.
● There is a tape in the TV/VCR. The record tab must be intact.
4
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
1
PAUSE/STILL
Press the CO MBI button, then use the CH(annel) m/n
button or the Num ber buttons to select the channel you
want to record.
2
3
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 30.
1
4
2
5
8
0
3
6
9
CH.
1
7
3
A.CH
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately. The RECORD light will appear.
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
OTR
CH12
LENGTH 0:30
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
LENGTH
CANCEL
:
:
PRESS OTR
PRESS CLEAR
Helpful Hints
4
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired recording length appears on
the screen.
To stop an O TR before recording is finished, press the
STO P/EJECT button on the TV/VCR.
O r, press the REC(ord)/O TR button, then press the
CLEAR button, then press the STO P/▼ button on the
rem ote control.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but-
ton.
• You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 33.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
• If the end of the tape is reached
during an OTR, the VCR will eject
the tape and turn itself off.
32 Rerecording (Tape Duplication)
AUDIO and VIDEO OUT Jacks on source unit
(VCR or Camcorder)
AUDIO
VIDEO
STOP/EJECT
EARPHONE
VIDEO AUDIO
OUT
IN
Audio Cable (white) from
AUDIO OUT to AUDIO
AUDIO and VIDEO
Jacks on TV/VCR
Video Cable (yellow) from
VIDEO OUT to VIDEO
1
Make the connections shown above, using audio and video
cables. (Make sure the source unit is connected to a
power source.)
2
The source unit (VCR or camcorder) will play your tape. Insert a
prerecorded tape in the source unit. If playback begins, press
the STOP button on the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR rem ote control at the TV/VCR. Press
the CO MBI button, then press Num ber buttons 0, 0 so
that A/V IN appears on the screen.
5
Point the TV/VCR rem ote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP or
SLP) appears on the screen.
Helpful Hints
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
• Different brands of equipment may
operate differently.
6
Press the PLAY button on the source unit and the
REC(ord)/O TR button on your TV/VCR at the sam e tim e.
Copying will begin.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
• Audio and video cables are not
included.
7
To stop copying, press the STO P/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
cam corder).
Defeat Recording 33
Follow the steps below to prevent accidental recording.
2-3
POWER
EJECT
1
Press the CO MBI button, then press the MENU button.
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PLAY
REW
F.FWD
STOP
REMINDER
BRIGHTNESS
STATUS/EXIT
1
4
1
4
2
5
8
0
3
6
9
2
CH.
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
7
VCR SETUP
A.CH
VOL.
CABLE/DBS
COMBI
> ONE TIME PLAY
REPEAT PLAY
[ON]
VCR PLUS+
/ENTER
ON-SCREEN MODE
VAR.SLOW
MUTE
SLOW
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
DEFEAT RECO RDING, then press the F.FW D/B button
so that O N appears beside DEFEAT RECO RDING.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
> DEFEAT RECORDING [ON]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
Helpful Hints
SELECT KL CHOOSE
TO END PRESS EXIT
B
• You can not set DEFEAT RECORD-
ING to ON while a recording is in
progress.
• If you set DEFEAT RECORDING to
ON after a timer recording has
been set, the timer recording will
not occur.
4
Press the STATUS/EXIT button.
• You can not program a timer
recording if DEFEAT RECORDING is
set to ON.
5
Now, REC DEFEATED will flash on the screen when you
press the REC(ord)/O TR button.
• To set DEFEAT RECORDING to
OFF, repeat steps 1-2 above. At
step 3, press the PLAY/o button or
the STOP/p button to select
DEFEAT RECORDING, then press
the F.FWD/B button so that OFF
appears beside DEFEAT RECORD-
ING. Press the STATUS/EXIT
button.
REC DEFEATED
34 Timer Recording
Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
● The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu.
2-3
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
● Channels are set up.
REC/OTR
PAUSE/STILL
● There is a tape in the TV/VCR. (Make sure the tape’s record
tab is intact and the tape is long enough to record the pro-
gram.)
PLAY
REW
F.FWD
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay start again at step 1.
STOP
STATUS/EXIT
1
1
4
2
5
8
0
3
6
9
1
CH.
Press the CO MBI button, then press the MENU button.
7
A.CH
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
REMINDER
VAR.SLOW
MUTE
SLOW
BRIGHTNESS
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the F.FW D/B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press
the F.FW D/B button.
Helpful Hints
• If the power fails, programmed
timer recordings will be restored
when the clock is reset. (The clock
will reset itself automatically if you
are using the AUTO CLOCK feature.
Details are on pages 14-17. If you
are not using the AUTO CLOCK
feature, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
the timer recording was scheduled
to take place during the power fail-
ure.
● O NCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
● W EEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(exam ple)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
• You cannot set a timer recording if
DEFEAT RECORDING is set to ON.
Details are on page 33.
Timer Recording (cont’d) 35
4
Use the Num ber buttons (1-8) to select a position in
which to store the tim er recording. Flashing numbers indi-
cate an open position (one in which a timer recording has not
been stored yet).
4-7
NOTE: If you select a number that already has been used to store a
timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
for a few seconds. Then information about the program in that position
will appear on the screen. If this happens, press the STATUS/EXIT but-
ton. Then use the Number buttons to select another position.
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
PLAY
REW
F.FWD
STOP
5
Use the Num ber buttons to enter the channel of the TV
program you want to record.
● If you are recording from line input, press 0, 0. A/V IN will
appear on the screen.
STATUS/EXIT
1
4
2
5
8
0
3
6
9
CH.
● If you are recording using a Cable Box, enter the Cable Box
output channel (03 or 04). Be sure to select the channel of the
TV program at the Cable Box and leave the Cable Box on for
the timer recording.
7
A.CH
VOL.
CABLE/DBS
COMBI
ONE TIME PROGRAM
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
PROGRAM
1
TRACKING
F.ADV
CHANNEL – – –
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the hour(s) you want the
recording to begin. Press two Num ber buttons for the
m inute(s) you want the recording to begin. Press 1 for
AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
– – : – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
7
Follow the instructions in step 6 to set the recording’s
stop tim e. (AM or PM will be set automatically.)
• If the numbers entered do not
match the TV/VCR’s calendar, the
entry will be rejected and a question
mark will appear on the screen.
• To make corrections while you are
programming a timer recording,
press the CLEAR button until the
cursor is flashing on the item you
want to change. Then enter the cor-
rect information.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
TIME OFF – – : – –
09:30 PM
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Instructions continue on page 36.
36 Timer Recording (cont’d)
8
11
Press the Num ber 1 button to record in SP speed or
press the Num ber 2 button to record in SLP speed. Details
about tape speed are on page 30. You cannot use the SPEED button
at this time.
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
ONE TIME PROGRAM
PROGRAM
1
PLAY
STOP
REW
F.FWD
CHANNEL 10
TIME ON
09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
STATUS/EXIT
SP=1 SLP=2
10
8
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
1
4
7
2
5
8
0
3
6
9
CH.
9
9
A.CH
Press two Num ber buttons for the m onth and two
Num ber buttons for the day you want the program to
record. For example, for July 10, 1999, press 07, 10. The day of
the week and the year will be displayed automatically. (You cannot
program the TV/VCR to record more than one year in advance.)
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
10
09:30 PM
11:00 PM
SLP
Turn off the TV/VCR
for the recording.
Insert a tape in
the TV/VCR.
START DATE 07/10/99
SATURDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Leave the Cable
Box/DBS on
(if applicable).
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
● If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
Helpful Hints
• PROGRAM NOT COMPLETED
CLASH may appear on the screen
when you finish setting a timer
recording. This means that the
timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not be carried
out.
● If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the PO W ER button to turn off the TV/VCR power.
The RECORD light will flash slowly if a tape is in the TV/VCR. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Please see page 64 for more
Helpful Hints.
Timer Recording (cont’d) 37
Checking or Clearing Tim er Recordings
2-4
1
W ith the TV/VCR on, press the CO MBI button, then
press the MENU button.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
2
PLAY
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PRO GRAM, then press the F.FW D/B button.
REW
F.FWD
STOP
STATUS/EXIT
3
5
1
Press the PLAY/▲ button or the STO P/▼ button to select
PRO GRAM REVIEW , then press the F.FW D/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
1
4
2
5
8
0
3
6
9
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
4
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
Press the F.FW D/B button to display inform ation about
the next program m ed tim er recording. (If you do not press
a button within 10 seconds, information about the next pro-
grammed timer recording will appear.) This will continue until all
positions have been displayed. Then, the menu will disappear. You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the tim er recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1 - 4 to m ake sure you have cleared the cor-
rect position.
38 Setting Up the VCR Plus+ Programming System
1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program the TV/VCR with your local channel
information. To fill in the boxes, you will need 1) a cable channel line-up list, if applicable (you can request
one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in
your TV guide or the TV listings of your local newspaper.
NO TE: If you are using a Cable Box/DBS, the Cable/TV channel m ust be 03 or 04 (the Cable
Box/DBS output channel) for every VCR Plus+ channel.
TV Channels
TV Channels
Station
Call Letters
Station
Call Letters
VCR PLUS+ CH.
VCR PLUS+ CH.
CABLE/TV CH.
CABLE/TV CH.
Setting Up the VCR Plus+ Programming System (cont’d) 39
Examine the lists on
page 38.
2
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must
tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
4-6
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
● Make each entry within 60 seconds of the previous entry.
REC/OTR
PAUSE/STILL
PLAY
REW
F.FWD
3
STOP
Press the CO MBI button, then press the MENU button.
STATUS/EXIT
3
4
7
6
1
4
2
5
8
0
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
CH.
7
A.CH
VOL.
5
CABLE/DBS
COMBI
Press the PLAY/▲ button or the STO P/▼ button to select
VCR PLUS+ REF. MAP, then press the F.FW D/B button.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
VCR PLUS+ CROSS REF. MAP
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
VCR PLUS+
124
CABLE/TV
– – –
125
– – –
01 – – – –
B
– – –
– – –
– – –
02
03
TO SELECT CH PRESS ▲▼
THEN ENTER CH NO.
TO END PRESS EXIT
6
Look at the lists you filled in on page 38. For stations whose
VCR Plus+ and Cable/TV channels do not m atch, press
the PLAY/▲ button or the STO P/▼ button until the
arrow is beside the VCR Plus+ channel you need. Then,
press the Num ber buttons to enter the corresponding
Cable/TV channel from your list. (Enter a “0” before single-
digit channels for the quickest results.) Continue this process until
you have entered all the stations on your list.
Note: If you are using a Cable Box/DBS, the Cable/TV channel will
be 03 or 04 (the Cable Box/DBS output channel) for every VCR
Plus+ channel. You must set the Cable Box/DBS to the channel
you want to record; leave the Cable Box/DBS on for the timer
recording.
Helpful Hints
• To correct a Cable/TV channel num-
ber, repeat the steps on this page.
• To clear a Cable/TV channel num-
ber, repeat steps 3-5 on this page.
Then, press the CH(annel) m/n
button to select it. Press the CLEAR
button, then press the
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124
– – –
– – –
23
– – –
– – –
125
01 – – – –
02
03
B
TO SELECT CH PRESS ▲▼
TO DELETE PRESS CLEAR
TO END PRESS EXIT
STATUS/EXIT button.
• To select line input for the Cable/TV
channel, press 0,0. A/V IN will
appear on the screen.
7
Press the STATUS/EXIT button.
40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
● The clock has been set. If not, CLOCK MUST BE SET appears.
● Channels are programmed.
POWER
EJECT
● There is a tape in the TV/VCR (make sure the tape’s record tab
is intact and the tape is long enough to record the program).
● You have completed the steps on pages 38-39.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay return to step 1.
PLAY
3
2
REW
F.FWD
STOP
STATUS/EXIT
1
1
4
2
5
8
0
3
6
9
Press the CO MBI button, then press the VCR
PLUS+/ENTER button.
CH.
7
VCR PLUS+ PROGRAM
A.CH
PLUS CODE : – – – – – – – –
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
1
TRACKING
F.ADV
TO END PRESS EXIT
SMART
PICTURE
SKIP
SEARCH SEARCH
INDEX
2
Press the Num ber buttons to enter the PlusCode pro-
gram m ing num ber of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 95557 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
3
• You cannot set a timer recording if
DEFEAT RECORDING is set to ON.
Details are on page 33.
• If CODE ERROR flashes after you
enter the PlusCode programming
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
• CLASH may flash on the screen after
you complete step 2. This means
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not be carried
out.
Press the PLAY/▲ button or the STO P/▼ button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press the
F.FW D/B button.
● O NCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
● W EEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
VCR PLUS+ PROGRAM
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT ▲▼ CHOOSE
TO END PRESS EXIT
B
Timer Recording With the VCR Plus+ Programming System (cont’d) 41
4
Press the Num ber 1 button to record in SP speed or the
Num ber 2 button to record in SLP speed. Your selection
will appear to the right of REC SPEED on the screen, although
SP=1 SLP=2 will continue to flash. For details about tape speed,
see pages 30 and 63. You cannot use the SPEED button at this
POWER
EJECT
time.
6
4
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
ONE TIME PROGRAM
PAUSE/STILL
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
SP=1 SLP=2
START DATE
09
10:30 PM
11:30 PM
SLP
PLAY
REW
F.FWD
STOP
07/10/99
SATURDAY
TO END PRESS EXIT
STATUS/EXIT
5
1
4
2
5
8
0
3
6
9
5
CH.
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
7
A.CH
● If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
6
Turn off the TV/VCR power. The REC(ord) light will flash. If
you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts.
Helpful Hints
• To exit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Turn off the TV/VCR for the
recording. Insert a tape in the
TV/VCR. Leave the Cable
Box/DBS on (if applicable).
42 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1,5
1
POWER
EJECT
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
SLEEP/WAKE UP
SPEED
MEMORY
4
3
REC/OTR
PAUSE/STILL
PLAY
2
REW
F.FWD
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
STOP
STATUS/EXIT
01:08 PM
CH10
STOP
2
1
4
2
5
8
0
3
6
9
CH.
SLP
1 : 23 : 45
7
A.CH
VOL.
CABLE/DBS
COMBI
3
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
W hile the counter rem ains on the screen, press the
CLEAR button to reset the real-tim e counter to zero.
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
0 : 00 : 00
4
W hile the counter rem ains on the screen, press the MEM-
O RY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00
5
To go to a tape location where the real-tim e counter was
reset to zero, press the REW (ind)/s button or the
F.FW D/B button when playback is stopped. W hen the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/o button to
watch the tape.
Helpful Hints
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 43.
• You may only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
lost.
Repeat Play 43
Follow the steps below to program the TV/VCR to play a tape
over and over.
2-3
POWER
EJECT
1
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
Press the CO MBI button, then press the MENU button.
PAUSE/STILL
PLAY
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REW
F.FWD
STOP
REMINDER
STATUS/EXIT
BRIGHTNESS
1
4
1
4
2
5
8
0
3
6
9
CH.
2
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR SETUP
VCR PLUS+
/ENTER
> ONE TIME PLAY
REPEAT PLAY
ON-SCREEN MODE
[ON]
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY, then press the F.FW D/B button so that
O N appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
4
• The TV/VCR will stay in Repeat Play
mode until you set ONE TIME PLAY
to ON, even if the TV/VCR is turned
off. To set ONE TIME PLAY to ON,
follow steps 1-2 above. Then, press
the PLAY/o button or the STOP/p
button to select ONE TIME PLAY.
Press the F.FWD/B button so that
ON appears beside ONE TIME PLAY.
Then, press the STATUS/EXIT but-
ton.
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
• The real-time counter memory will
not function during Repeat Play
mode.
44 A-B Repeat Play
Follow the steps below to program the TV/VCR to play the mate-
rial between two specified points (A and B) on a tape over and
over again.
Insert a tape in the TV/VCR.
1
2
3-5
POWER
EJECT
1
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
Insert a tape in the TV/VCR.
PAUSE/STILL
PLAY
2
REW
F.FWD
Press the CO MBI button, then press the MENU button.
STOP
STATUS/EXIT
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
1
4
2
5
8
0
3
6
9
REMINDER
CH.
BRIGHTNESS
7
A.CH
VOL.
CABLE/DBS
COMBI
3
VCR PLUS+
/ENTER
Press the PLAY/▲ button or the STO P/▼ button to select
VCR SETUP, then press the F.FW D/B button.
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
VCR SETUP
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the PLAY/▲ button or the STO P/▼ button to select
REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
Helpful Hints
SELECT KL CHOOSE
TO END PRESS EXIT
B
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE
TIME PLAY to ON, follow steps 2-3
above. Then, press the PLAY/o but-
ton or the STOP/p button to select
ONE TIME PLAY. Press the
F.FWD/B button so that ON
appears beside ONE TIME PLAY.
Then, press the STATUS/EXIT but-
ton.
5
Press the F.FW D/B button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
[A-B]
• The end position (B) must be later
on the tape than the start position
(A).
SELECT KL CHOOSE
TO END PRESS EXIT
B
A-B Repeat Play (cont’d) 45
6
Press the STATUS/EXIT button to rem ove the m enu. A-
B REPEAT will appear on the screen. Beneath it, the letter A will
flash beside the real-time counter.
7-8
POWER
EJECT
.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
REW
F.FWD
A-B REPEAT
0:12:34
STOP
A
STATUS/EXIT
6
7
1
4
2
5
8
0
3
6
9
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMO RY button to set the start position (A).
The flashing A will become a flashing B.
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
A-B REPEAT
0:00:00
B
8
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMO RY button to set the end position (B).
● The length of time between the start position (A) and the end
position (B) must be at least three minutes.
9
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
Helpful Hints
• The counter cannot be memorized
or reset when you are using this
feature.
(TV programming will appear while the tape is rewinding.)
• Positions A and B will be erased
when you press the REC(ord)/OTR
button.
• A-B REPEAT will not appear on the
screen at step 6 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on the screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
• A-B Repeat Play will be retained if
you turn off the TV/VCR power.
However, if you eject the tape, A-B
Repeat Play will be cancelled.
46 Playback Options
Forward and Reverse Searching (SP/LP/SLP)
POWER
EJECT
1
During tape playback, press and release the F.FWD/B button or the
REW(ind)/{ button. A fast forward or reverse picture search will
begin.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
REW
F.FWD
STOP
STATUS/EXIT
2
To return to normal playback, press the PLAY/▲ button.
1
4
2
5
8
0
3
6
9
Super High Speed Searching (LP/SLP)
CH.
7
1
A.CH
VOL.
CABLE/DBS
COMBI
During tape playback, press the F.FWD/B button or the
REW(ind)/{ button, then press again. The TV/VCR will now search
in super high speed.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
2
To return to normal playback, press the PLAY/▲ button.
Viewing a Still Picture
1
During tape playback, press the PAUSE/STILL button. A still picture
will appear on the screen.
2
To advance the still picture frame-by-frame, press the F(rame).
ADV(ance) button.
Helpful Hints
• Slow and Still modes will automati-
cally switch to Stop mode after five
minutes to protect the TV/VCR and
the tape from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
3
To release the still picture and return to normal playback, press the
PLAY/▲ button.
Viewing a Slow Motion Picture
Standard Play, Long Play, or Super
Long Play. For details about tape
speed, see page 30.
1
• LP/SLP means this feature will work
with tapes recorded in Long Play
and Super Long Play. For details on
tape speed, see page 30.
• During forward and reverse search-
ing, horizontal noise bars will
appear on the TV/VCR screen.
• Tapes recorded in SLP speed will
have the clearest picture in Still
mode.
During tape playback, press the SLOW button. The tape will play in
slow motion.
NOTE: You can control the speed of slow motion playback by pressing the
VAR(iable). SLOW button.
2
To release Slow mode and return to normal playback, press the
PLAY/▲ button.
Blue Background 47
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select
a channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
2-3
POWER
EJECT
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
1
PLAY
Press the CO MBI button, then press the MENU button.
REW
F.FWD
STOP
STATUS/EXIT
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
1
4
1
4
2
5
8
0
3
6
9
REMINDER
CH.
BRIGHTNESS
7
A.CH
2
VOL.
CABLE/DBS
COMBI
Press the PLAY/o button or the STO P/p button to select
VCR SETUP, then press the F.FW D/B button.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
VCR SETUP
SEARCH SEARCH
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/o button or the STO P/p button to select
BLUE BACKGRO UND. Then, press the F.FW D/B button
repeatedly so that O FF (or O N) appears beside BLUE BACK-
GRO UND.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
48 SmartLock
SmartLock enables parents to prevent their children from watch-
ing inappropriate material on TV.
2,4
SmartLock reads the ratings for programming (except for news
and sports programs, unedited movies on premium cable channels,
and Emergency Broadcast System signals), then denies access to
programming if the program’s rating meets or exceeds the limita-
tions you select. The ratings are defined on page 51.
To block ratings, follow the steps below.
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
Press the CO MBI button, then press the MENU button.
1
1
4
2
5
8
0
3
6
9
>
SMARTLOCK
REVIEW
PRESS
B
CH.
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
7
3
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
2
SMART
PICTURE
SKIP
INDEX
Press the PLAY/▲ button or the STO P/▼ button to select
SMARTLO CK. Then, press the F.FW D/B button.
SEARCH SEARCH
SMARTLOCK
_ _ _ _
Helpful Hints
Enter Your Access Code
• If the “Incorrect Access Code...”
message appears after step 3, enter
the correct access code.
3
• Programming may be rated by the
Motion Picture Association of
America (MPAA) or according to the
Television Parental Guidelines. In
order to block any inappropriate
programming, set your limits in both
places (Movie Ratings and Parental
Guidelines).
Use the Num ber buttons to enter your access code.
The default code is 0711. If you have not set up your personal
access code, you should use 0711. (To set up your personal
access code, see page 50.)
SMARTLOCK
X X X -
You will complete steps 1-7 twice,
choosing Movie Ratings at step 5
the first time, then choosing
Parental Guidelines at step 5 the
second time.
• Tape playback will not be available
on a tape if the rating of the tape is
blocked.
Enter Your Access Code
4
Press the PLAY/▲ button or the STO P/▼ button to select
BLO CK. Then, press the F.FW D/B button.
• If you enter the access code once,
you may change channels without
seeing the “CHANNEL XX
BLOCKED” message again. If you
turn off the TV/VCR power, you will
be asked for the access code again
when you tune to a blocked chan-
nel.
SMARTLOCK
> BLOCK
CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
SmartLock (cont’d) 49
5-6
5
Press the PLAY/▲ button or the STO P/▼ button to select
Movie Ratings or Parental Guidelines. Then, press the
F.FW D/B button.
POWER
EJECT
SLEEP/WAKE UP
SPEED
MEMORY
BLOCK
REC/OTR
PAUSE/STILL
> Movie Ratings
Parental Guidelines
PLAY
REW
F.FWD
SELECT KL CHOOSE
TO END PRESS EXIT
B
STOP
STATUS/EXIT
6
7
1
4
2
5
8
0
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
the rating you want to block. Then, press the F.FW D/B
button so that O N appears beside the rating.
CH.
7
For example, if you set PG to ON, you may not view PG pro-
gramming because the block is on. Programs with a PG or higher
rating will be blocked. A “CHANNEL XX BLOCKED...” message
will appear when someone tries to access such programming.
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
PARENTAL GUIDELINES
MOVIE RATINGS
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
> TV-Y
TV-Y7
[OFF]
>
- - - - - - - - - - - - - - - -
> G
PG
PG-13
R
NC-17
X
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
[OFF]
TV-G
[OFF]
TV-PG
TV-14
TV-MA
>
>
>
SELECT KL CHOOSE
B
SELECT KL CHOOSE
B
TO END PRESS EXIT
TO END PRESS EXIT
● More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,
and TV-MA. (See example below.) When you press the
F.FWD/B button to turn on TV-Y7, TV-PG, TV-14 or TV-MA,
additional sub-ratings will appear.
If you select the rating category, such as TV-PG, and turn it on
or off, the specific sub-ratings, such as V for violence, will turn
on or off automatically. You can always turn specific sub-ratings
on or off by selecting them individually. However, you may only
set a sub-rating to ON if the rating category is set to ON.
● Ratings are defined on page 51.
Helpful Hints
Exam ple
of specific
sub-ratings
• If the “CHANNEL XX BLOCKED...”
or “PLAYBACK BLOCKED...” mes-
sage appears and you want to view
this programming, enter your access
code. The channel will remain
blocked until you enter the correct
code. If you do not know the code,
you will have to select another chan-
nel or press the STOP/p button.
• Ratings will remain blocked even
after a power failure.
TV-PG
> TV-PG
[OFF]
D
L
S
[OFF]
[OFF]
[OFF]
[OFF]
V
SELECT KL CHOOSE
B
TO END PRESS EXIT
• You cannot access the menu when
the “CHANNEL XX BLOCKED...” or
“PLAYBACK BLOCKED...” message
appears.
7
Press the STATUS/EXIT button.
50 SmartLock (cont’d)
To change the access code, follow these steps.
2,4
1
POWER
EJECT
Press the CO MBI button, then press the MENU button.
SLEEP/WAKE UP
SPEED
MEMORY
>
SMARTLOCK
REVIEW
PRESS
B
REC/OTR
PAUSE/STILL
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
PLAY
REW
F.FWD
STOP
STATUS/EXIT
1
2
6
1
4
2
5
8
0
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
SMARTLO CK. Then, press the F.FW D/B button.
SMARTLOCK
CH.
7
_ _ _ _
A.CH
VOL.
CABLE/DBS
COMBI
Enter Your Access Code
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Use the Num ber buttons to enter your old access code.
The default code is 0711. If you have never set up your personal
access code, use 0711 now.
After you enter the code, the SMARTLOCK menu will appear.
SMARTLOCK
X X X -
3,5
Enter Your Access Code
Helpful Hints
• In order to protect the privacy of
the access code, an X will appear
on the screen instead of the num-
ber you enter.
• If a “Wrong Code...” message
appears on the screen after you
complete step 5, you entered the
wrong numbers in the Confirm Code
space. Repeat the steps on this
page.
4
Press the PLAY/▲ button or the STO P/▼ button to select
CHANGE CO DE. Then, press the F.FW D/B button.
SMARTLOCK
BLOCK
> CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
• You cannot use the default code
after you set up your personal
access code.
• If a power failure occurs, the
default code, 0711, will be the
active access code again.
• If you connect the power cord to an
AC outlet that is controlled by a wall
switch, your personal access code
will be erased every time you turn
off the power at the wall switch.
The default code will be the active
code again.
5
Use the Num ber buttons to enter your desired access
code in the New Code space. Then, enter the sam e code
in the Confirm Code space.
Your new access code should be recorded. You will return to the
SMARTLOCK menu.
_ _ _ _
New Code
Confirm Code
_ _ _ _
6
Press the STATUS/EXIT button.
SmartLock (cont’d) 51
To check the SmartLock settings, follow these steps.
1
Press the CO MBI button, then press the MENU button.
POWER
EJECT
>
REVIEW
PRESS
B
EXIT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PAUSE/STILL
PLAY
2
3
REW
F.FWD
STOP
2
STATUS/EXIT
Press the PLAY/▲ button or the STO P/▼ button to select
REVIEW . Then, press the F.FW D/B button so that the
Sm artLock settings appear.
1
1
4
2
5
8
0
3
6
9
CH.
Ratings that are blocked will appear on the screen.
An “X” will appear if a specific sub-rating is blocked, such as V for
Violence in the TV-14 category.
7
A.CH
VOL.
CABLE/DBS
COMBI
BLOCKED RATINGS
Movie Ratings
VCR PLUS+
/ENTER
G
PG-13
NC-17
VAR.SLOW
MUTE
SLOW
Parental Guidelines
TV-Y7
TRACKING
F.ADV
- - - - - - - - - - - - - - - - - - - -
TV-G
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
D
L
S
x
x
x
V
x
TV-PG
TV-14
TV-MA
x
–
x
x
x
x
3
Press the STATUS/EXIT button.
RATING EXPLANATIO NS
For Movie Ratings
• G - General Audience
• PG - Parental Guidance suggested.
• PG-13 - Unsuitable for children under 13
• R - Restricted; under 17 requires accompanying parent or adult
guardian
• NC-17 - No one under 17 admitted
• X - Mature audience only
For Parental Guidelines
• V - Violence
• S - Sexual situations
• L - Language
• D - Inappropriate dialogue
• FV - Fantasy Violence may frighten children under seven; TV-Y7
category only. Some cartoons may have this rating.
• TV-Y - Appropriate for all children
• TV-Y7 - Appropriate for children seven and older
• TV-G - General Audience
• TV-PG - Parental Guidance suggested.
• TV-14 - Unsuitable for children under 14
• TV-MA - Mature audience only
52 Sleep Timer
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the CO MBI button, then press the SLEEP/W AKE
UP button.
TO ADJUST PRESS s/B
POWER
EJECT
–TIMER–
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
>
SLEEP
WAKE UP
ON-TIME
OFF
PAUSE/STILL
1
PLAY
2
3
REW
F.FWD
STOP
STATUS/EXIT
2
o
p
Press the PLAY/ button or the STO P/ button to select
SLEEP. Then press the REW (ind)/s button or the
F.FW D/B button to select 30 MIN(utes), 60 MIN(utes),
90 MIN(utes), or 120 MIN(utes). (You can not set the sleep
timer during a recording.)
1
4
2
5
8
0
3
6
9
CH.
7
A.CH
VOL.
TO ADJUST PRESS s/B
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
–TIMER–
VAR.SLOW
MUTE
SLOW
>
SLEEP
WAKE UP
ON-TIME
TRACKING
F.ADV
30 MIN
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
3
Press the STATUS/EXIT button. The TV/VCR will shut itself
off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
Helpful Hints
• To cancel the sleep timer, press the
COMBI button, then press the
SLEEP/WAKE UP button. Press the
PLAY/o button or the STOP/p but-
ton to select SLEEP, then press the
s
REW(ind)/ button or the
B
F.FWD/ button to select OFF.
Press the STATUS/EXIT button.
• To see how much time remains
before the TV/VCR shuts itself off,
press the SLEEP/WAKE UP button
once. To remove the display, press
the STATUS/EXIT button.
Wake Up Timer 53
The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
● Make sure the clock is set. If the clock has never been set,
CLOCK MUST BE SET will appear on the screen after you select
WAKE UP at step 2. Then the SET CLOCK menu will appear.
● Make sure a tape is in the TV/VCR if you want the TV/VCR to
start tape playback at the specified time.
2-3
5
1
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
● Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
PAUSE/STILL
PLAY
REW
F.FWD
STOP
1
STATUS/EXIT
Press the COMBI button, then press the SLEEP/W AKE UP
button.
TO ADJUST PRESS s/B
4
1
4
2
5
8
0
3
6
9
–TIMER–
CH.
>
SLEEP
WAKE UP
ON-TIME
OFF
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
2
TRACKING
F.ADV
Press the PLAY/o button or the STOP/p button to select
W AKE UP. Then, press the REW (ind)/s button or the
F.FW D/B button to select TV ON or VCR ON.
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
TO ADJUST PRESS s/B
–TIMER–
SLEEP
WAKE UP
ON-TIME
>
TV ON
3
o
p
s
Press the PLAY/ button or the STOP/ button to select
ON-TIME. Then, press the REW (ind)/ button or the
F.FW D/ button to select your desired wake up tim e. Each
B
s
B
press of the REW(ind)/ button or the F.FWD/ button will
increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS s/B
–TIMER–
SLEEP
WAKE UP
ON-TIME
12:00 AM
>
Helpful Hint
4
• To cancel the Wake Up Timer, fol-
low step 1 above. At step 2, press
the REW(ind)/s button or the
F.FWD/B button to select OFF.
Press the STATUS/EXIT button.
Press the STATUS/EXIT button.
5
Press the POW ER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified tim e.
54 Closed Caption
When you watch a program that is being broadcast with closed
captions, you can access on-screen boxes containing the pro-
gram’s dialogue (for example, what a character is saying), dialogue
in a foreign language, or information (such as a channel guide,
schedule, or announcements). Follow the steps below to select
closed captions.
Not all TV programs and commercials are broadcast with closed
captions. Similarly, all types of closed captions (second language,
half-screen text, etc.) are not always broadcast. If closed caption-
ing is not broadcast, you cannot receive it. This does not indicate
a problem with the TV/VCR. Refer to your area’s TV program
listings for the shows offered with closed captions.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
2
REW
F.FWD
3
1
STOP
STATUS/EXIT
1
4
2
5
8
0
3
6
9
1
CH.
Press the CO MBI button, then press the MENU button.
7
A.CH
VOL.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
REMINDER
TRACKING
F.ADV
BRIGHTNESS
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
2
Press the PLAY/▲ button or the STO P/▼ button to select
CAPTIO N.
TO ADJUST PRESS { /
B
OFF
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
3
Press the REW (ind)/{ button or the F.FW D/B button to
select your desired m ode.
The selected closed caption mode will appear beside CAPTION
on the screen.
● CAPTION1 displays standard closed captions (what a character
is saying).
● CAPTION2 displays foreign language closed captions (foreign
language words showing what a character is saying).
● TEXT1 and TEXT2 display half-screen text (such as a channel
guide, schedule, or announcement).
● OFF turns closed captions off. Captions will not appear on the
screen.
Helpful Hint
TO ADJUST PRESS { /
B
• To cancel closed captions, follow
steps 1-2. At step 3, press the
REW(ind)/{ button or the
F.FWD/B button to select OFF.
Press the STATUS/EXIT button.
Exam ple:
CAPTIO N1
Menu
CAPTION1
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
Screen
TINT
Closed Caption (cont’d) 55
4
Press the STATUS/EXIT button. The type of closed captions
you selected at step 3 will appear on the screen if available.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
REW
F.FWD
STOP
STATUS/EXIT
HELLO
4
1
4
2
5
8
0
3
6
9
Standard Closed Captions
CH.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
WORLD WEEATHER
TRACKING
F.ADV
5 C
8 C
7 C
23:00
20:00
4:00
CLOUD
RAIN
CLOUD
NYL
LOS
LONDON
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
Half-screen text
Helpful Hints
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is set to ON.
Details are on page 28.
• Abbreviations, symbols, and other
grammatical shortcuts are often
used in order to keep pace with the
on-screen action. This does not indi-
cate a problem with the TV/VCR.
• When you change channels, the
closed captions may be delayed for
a few seconds.
• When you adjust the volume or
mute the volume, closed captions
may be delayed for a few seconds.
56 Volume Bar
Usually, the volume bar appears when you press the VOL(ume)
m/n button. If you do not need it, set the VOLUME BAR to OFF.
For example, when you watch a program that is being broadcast
with closed captions, you may choose to set the VOLUME BAR to
OFF so the captions can remain on the screen. The captions will
remain on the screen even when you press the VOL(ume) m/n
button or the MUTE button.
2-3
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
1
PLAY
Press the CO MBI button, then press the MENU button.
REW
F.FWD
STOP
STATUS/EXIT
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
1
4
1
4
2
5
8
0
3
6
9
REMINDER
BRIGHTNESS
CH.
7
2
A.CH
VOL.
CABLE/DBS
COMBI
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SEARCH SEARCH
VOLUME BAR
[ON]
SET CLOCK
REMOTE LOCATOR
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/▲ button or the STO P/▼ button to select
VO LUME BAR, then press the F.FW D/B button. Each
press of the F.FWD/B button will turn the VOLUME BAR ON or
OFF.
4
Press the STATUS/EXIT button.
Automatic Operation Features 57
The following playback features will always operate.
Autom atic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on
automatically when you insert a tape with the record tab intact. If
a timer recording is set and the TV/VCR power is off, the
TV/VCR will eject the tape if the record tab is missing.
Autom atic Rewind, Eject, O ff
When a tape is played, fast forwarded, or recorded to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real-time counter is set
to zero. The TV/VCR will not turn itself off or eject the tape.
Mem ory Rewind, Power O ff
When the POWER button is pressed while the TV/VCR is rewind-
ing a tape, REW → POWER OFF will appear on the screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the counter was set to
zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Autom atic Tracking Adjustm ent
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however,
you may get a better picture using the manual tracking controls
(see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p but-
tons on the TV/VCR or the TRACKING m/n button on the
remote control.
Tracking returns to Automatic Tracking Adjustment when a tape
is inserted or when the STOP/p button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
58 Smart Picture
The Smart Picture feature allows you to improve the TV/VCR’s
picture when viewing sports, a movie, or video games; to improve
the picture when the antenna/cable signal is weak; or to reset the
picture controls to their original settings.
1
Press the SMART PICTURE button repeatedly until the
Sm art Picture m ode you want appears on screen. The fol-
lowing options will be available.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
SPO RTS
MO VIE
Use to watch a sports program.
Use to watch a movie.
PLAY
REW
F.FWD
W EAK SIGNAL Use when the picture is weak.
VIDEO GAMES Use when playing a video game.
Use to reset the picture controls to
STOP
STATUS/EXIT
TV RESET
their original settings.
1
4
2
5
8
0
3
6
9
CH.
Your selection will remain on the screen for about 10 sec-
onds, then disappear.
7
A.CH
VOL.
CABLE/DBS
COMBI
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
1
Remote Locator 59
Your TV/VCR can find your remote control for you.
When you press the POWER button on the TV/VCR to turn on
the TV/VCR, your remote control beeps and LOCATING
REMOTE appears on the screen. The remote control will beep for
about 30 seconds. Or, press any button on the remote control to
stop the beeping.
If another remote control beeps ...
2-3
If another rem ote control beeps...
The TV/VCR may find other remote controls. If this occurs, you
can program the TV/VCR to find only its remote control. Follow
the steps below.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
1
REW
F.FWD
6
1
Press the CO MBI button, then press the MENU button.
STOP
STATUS/EXIT
2
1
4
2
5
8
0
3
6
9
Press the PLAY/▲ button or the STO P/▼ button to select
PRIM. SETUP, then press the F.FW D/B button.
CH.
7
3
A.CH
VOL.
CABLE/DBS
COMBI
Press the PLAY/▲ button or the STO P/▼ button to select
REMO TE LO CATO R, then press the F.FW D/B button.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
4
PRESS MUTE THEN
PAUSE KEY
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
TO CHANGE CODE FROM 4
TO END PRESS EXIT
5
4
Press the MUTE button, then press the PAUSE/STILL
button.
This device complies with part 15
of the FCC Rules. Operation is
subject to the following two condi-
tions: (1) This device may not
cause harmful interference, and (2)
this device must accept any inter-
ference received, including inter-
ference that may cause undesired
operation.
YOUR REMOTE LOCATOR
CODE IS 4
PRESS ANY DIGIT
TO CHANGE CODE
TO END PRESS EXIT
5
Press one Num ber button (0 - 9) to enter a single-digit code
for your remote control. Your remote control will beep briefly.
YOUR REMOTE LOCATOR
CODE HAS BEEN CHANGED
NEW CODE IS 3
Helpful Hint
TO END PRESS EXIT
• The volume will be delayed while
the LOCATING REMOTE message
appears on the screen. Press the
STATUS/EXIT button to remove the
message and restore the volume.
6
Press the STATUS/EXIT button.
60 Reminder
The channel number will remain on the screen at all times when
you set REMINDER to ON. The exception is when closed cap-
tioning is selected or during tape playback.
Set REMINDER to ON or OFF by following the steps below.
POWER
EJECT
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
1
2
4
REW
F.FWD
3
1
Press the CO MBI button, then press the MENU button.
STOP
STATUS/EXIT
TO ADJUST PRESS { /
B
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
1
4
2
5
8
0
3
6
9
CH.
TINT
SHARPNESS
7
A.CH
VOL.
CABLE/DBS
COMBI
2
VCR PLUS+
/ENTER
Press the PLAY/▲ button or the STO P/▼ button to select
REMINDER.
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
TO ADJUST PRESS { /
B
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
3
Press the REW (ind)/{ button or the F.FW D/B button to
select O N or O FF. Each press of the REW(ind)/{ button or
the F.FWD/B button turns REMINDER ON or OFF.
TO ADJUST PRESS { /
B
CH12
ON
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
4
Press the STATUS/EXIT button.
Index Search 61
This feature allows you to index the starting points of programs
that you have recorded on a tape. Then, you can easily rewind or
fast forward to that point.
Exam ple:
POWER
EJECT
If you are watching program number 4 and you want to fast for-
ward to program number 7, skip three programs.
SLEEP/WAKE UP
REC/OTR
SPEED
MEMORY
PAUSE/STILL
PLAY
CURRENT PLAYBACK PROGRAM
REW
F.FWD
3
Beginning of tape
End of tape
STOP
Pro. 1 Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
STATUS/EXIT
4
3
2
1
1
2
3
INDEX MARK
1
4
2
5
8
0
3
6
9
CH.
2
1
7
1
A.CH
VOL.
CABLE/DBS
COMBI
Press the CO MBI button, then press the INDEX SEARCH
button to bring up the index search display. There must be
a tape in the TV/VCR.
VCR PLUS+
/ENTER
VAR.SLOW
MUTE
SLOW
TRACKING
F.ADV
SMART
PICTURE
SKIP
INDEX
SEARCH SEARCH
INDEX SEARCH
00
ENTER INDEX NUMBER
2
W ithin 10 seconds, use the Num ber buttons to enter the
num ber of program s that you want to skip. For example, to
skip three programs, press Number buttons 0, 3. If you do not
make an entry within 10 seconds, the TV/VCR will exit Index
Search mode.
Helpful Hints
• Every time an index mark is
skipped, the number of programs
decreases by one.
• Up to 20 index marks may be
searched.
• This function will not operate in
recording mode.
• Press the STOP/p button to stop
the search.
• An index mark will be made auto-
matically when a recording begins.
• The index mark is not made at a
point at which recording is paused.
• The time gap between index marks
should be greater than 1 minute for
SP recording, 2 minutes for LP
recording, and 3 minutes for SLP
recording.
3
W ithin 10 seconds, press the F.FW D/B button or the
REW (ind)/{ button to skip forward or backward. The
TV/VCR will fast forward or rewind to the beginning of the
desired program, then begin playback. (The program numbers
count down on the screen as the searching progresses. To
remove the on-screen counter, press the INDEX SEARCH button
once.)
62 Specifications
General
CRT: 13-inch in line gun
Television system: NTSC-M
Closed caption system: Section 15.119, FCC
(Federal Communications Commission) Standard
Video Heads: Four heads
Tape width: 1/2 inch (12.65 mm)
Tape speed
SP: 33.35 mm/sec.
LP: 16.67 mm/sec.
SLP: 11.12 mm/sec.
Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)
Relative Humidity: 10% to 75%
Power requirement: AC 120V, 60Hz
Power consumption: 65W
Sound output: 1W
Dimensions:
15-13/16" (H) x 15-3/16" (W) x 14-13/16" (D)
402mm x 386mm x 376mm
Weight: 24.3 lbs (11.0 kg)
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
Midband: A – 1
Superband: J – W
Hyperband: A-5 – A-1
Special Channel: 5A
Ultraband: 37 – 94, 100 – 125
Term inals
Antenna In: VHF/UHF 75 ohms unbalanced
Video In: RCA connector
Audio In: RCA connector
Earphone: 3.5 mm CES
Electrical Specifications
Video input level: 0.5~2.0Vp-p
Audio input level: -10dBv
Video S/N ratio
SP: More than 42dBµ
Audio S/N ratio
SP: More than 38dB
Designs and specifications are subject to change without notice and without our legal obligation.
Glossary 63
AUDIO Jack: jack located on the front of the TV/VCR which is
used to record audio from another source.
Autom atic Channel Setup: process in which the TV/VCR
scans all available channels and places the ones you receive in its
memory. Then, when you push the CHANNEL o/p buttons,
you only scan through channels you receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF
(ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable
Box.
Brightness: adjusting increases or decreases the brightness of
the color on the screen.
Color: adjusting pales or brightens the TV/VCR color.
Dubbing: copying a tape using a VCR.
HQ : high quality; a feature in the TV/VCR circuitry which pro-
vides enhanced picture detail.
Line Input: The channel to which you set your TV/VCR during
dubbing. The line input channel is always channel 00 (A/V IN).
Mode: a TV/VCR operation.
O TR: One-Touch Recording; a timed recording that starts
immediately and records for 30 minutes to eight hours, whichev-
er you specify.
Picture: adjusting increases or decreases the contrast of the pic-
ture on the screen.
Sharpness: adjusting softens or clarifies the picture on the screen.
Tape Speeds: how fast the tape travels during playback or
recording.
• SP (standard play) – fastest tape speed (recording time for a
T120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for
a T120 tape is approximately six hours).
Tint: adjusting changes the tints of the picture on the TV/VCR
from purple to green.
VIDEO Jack: jack located on the front of the TV/VCR which is
used to record video from another source.
64 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number
of your product before you call. This information is displayed on the back of the product. Also, please
take a moment to identify the problem you are having, and be prepared to explain this to the representa-
tive. If you believe the representative will need to help you with operations, please stay near the product.
Our representatives will be happy to assist you.
Location
For safe operation and satisfactory performance of your TV/VCR, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom
of the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall
outlet. Grasp it by the plug.
• If water is spilled on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an
authorized service center.
• Do not put your fingers or objects into the TV/VCR cassette compartment.
• Do not place anything on top of the TV/VCR.
Dew W arning (Moisture Condensation)
• Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heat-
ing a cold room, or when the humidity is high. There is no warning that moisture has accumulated in
your TV/VCR. If you try to play a tape in a TV/VCR in which moisture has accumulated, the tape and
the TV/VCR could be damaged. If you think moisture may have accumulated inside the TV/VCR, keep
the TV/VCR power on (but do not play a tape) for at least two hours. This will allow the TV/VCR to
dry.
TV/VCR will not perform a tim er recording.
• Make sure the recording start and stop times are set correctly (pages 34-37). Midnight is 12 a.m.
Noon is 12 p.m.
• Make sure the TV/VCR power is off.
• Make sure the clock is set (pages 12-17).
• Make sure there is a tape in the TV/VCR. The tape must have a record tab.
• If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock
will reset itself automatically if you are using the AUTO CLOCK feature. Details are on pages 14-17. If
you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13.)
The timer recording will not occur only if the timer recording was scheduled to take place during the
power failure.
• Make sure DEFEAT RECORDING is set to OFF (page 33).
TV/VCR will not record.
• Make sure the tape has a record tab (page five).
• Make sure DEFEAT RECORDING is set to OFF (page 33).
• Plug the power cord into an active AC outlet (page seven).
• Check your hookups (pages six-seven).
• Set up the channels (page 10).
Helpful Hints (cont’d) 65
The rem ote control is not available, or the rem ote control will not access the pop up m enu.
• Use the buttons on the front panel of the TV/VCR to access the pop up menu (page 22). You can not
enter numbers (for example, to program a timer recording) using the front panel buttons.
TV/VCR has no power.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
Channel reception is poor.
• Check connections, then set up the channels again (page 10).
TV/VCR does not have a picture.
• Adjust the antenna (page six).
• Adjust the TV/VCR picture controls (pages 26-27).
TV/VCR has poor sound or no sound.
• Adjust the volume.
• Press the MUTE button to restore the volume.
Tape playback is poor or tape is destroyed.
• Adjust the tracking. Details are on page 57.
• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try
to play a tape. Details are on page 64.
TV/VCR does not display closed captions.
• Make sure COUNTER ONLY is set to OFF. Details are on page 28.
• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspa-
per.
Rem ote control does not operate TV/VCR.
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 22.
• Remove all obstacles between the remote control and the TV/VCR.
• Inspect and replace the batteries in the remote control. Details are on page five.
Num ber buttons won’t work for channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan-
nel numbers as a three-digit number. (Details are on page 24.)
A tape can’t be inserted into the TV/VCR.
• Insert the tape window side up, with the record tab facing you.
• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.
• Gently push on the center of the tape. Never force a tape into the TV/VCR.
• If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab
is missing.
A tape can’t be rem oved from the TV/VCR.
• Make sure the power plug is completely connected to an AC (alternating current) outlet.
• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR power for the timer recording.
TV/VCR ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page five.
The cylinder rotates when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The
quick play mechanism switches the tape mechanism from Stop to Play in just one second.
66 Limited Warranty
TV/VCR COMBINATION
90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)
This product must be carried in for repair.
WHO IS COVERED?
tribute the product, the local Philips service organiza-
You must have proof of purchase to receive warranty tion will attempt to provide service (although there
service. A sales receipt or other document showing
that you purchased the product is considered proof
of purchase.
may be a delay if the appropriate spare parts and
technical manual(s) are not readily available).
MAKE SURE YOU KEEP...
WHAT IS COVERED?
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced, and labor is free. From 90 days
to one year from the day of purchase, all parts will be
repaired or replaced, but you pay for all labor
charges. From one to two years from the day of pur-
chase, you pay for the replacement or repair of all
parts except the picture tube, and for all labor
charges. After two years from the day of purchase, you
pay for the replacement or repair of all parts, and for
all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service. Adjustments of the controls discussed there
may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUER-
TO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center
(see enclosed list) or authorized service center for
repair. When the product has been repaired, you
must pick up the unit at the center. Centers may
keep defective parts.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty on
all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this express
warranty. But, because some states do not allow limi-
tations on how long an implied warranty may last, this
limitation may not apply to you.)
• labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
• product repair and/or part replacement because of
misuse, accident, unauthorized repair or other
cause not within the control of Philips Consumer
Electronics Company.
• reception problems caused by signal conditions or
cable or antenna systems outside the unit.
• a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from
the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so the
above exclusion may not apply to you. This
includes, but is not limited to, prerecorded materi-
al, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or
tapes that have not been tested and labeled for
use in two, four, six, and eight hour VHS
recorders.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose. Philips
is not liable under any circumstances for any direct,
indirect, special, incidental or consequential damages,
howsoever incurred, even if notified of the possibility
of such damages.)
REMEMBER...
Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.
• a product that is used for commercial or institu-
tional purposes.
MODEL # __________________________________
SERIAL # __________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Philips
Consumer Electronics Company. In countries where
Philips Consumer Electronics Company does not dis-
This warranty gives you specific legal rights. You may have
other rights which vary from state to state.
Philips Service Solutions Group, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
EL4963E005 / MAC 6108/ 12-98
Index 67
a-b repeat play . . . . . . . . .44-45
accessories . . . . . . . . . . . . . . .68
ant(enna) jack . . . . . . . . . . .6, 23
audio jack . . . . . . . . . . .7, 22, 32
automatic
language selection . . . . . . . . . . .9
line input mode . . . . . .10, 32, 63
long play . . . . . . . . . . . . . .30, 63
lp . . . . . . . . . . . . . . . . . .30, 63
slow
button . . . . . . . . . . . . .24, 46
motion playback . . . . . . . . .46
slp . . . . . . . . . . . . . . . . . .30, 63
smart picture
playback . . . . . . . . . . . . . . .57
rewind . . . . . . . . . . . . . . . .57
memory
button . . . . . . . . . . . . . . . .24
setting . . . . . . . . . . . . . . . .58
smartclock . . . . . . . . . . . . .14-17
smartlock . . . . . . . . . . . . .48-51
sp . . . . . . . . . . . . . . . . . .30, 63
specifications . . . . . . . . . . . . .62
standard play . . . . . . . . . .30, 63
status display . . . . . . . . . . . . .28
status/exit button . . . . . . .25, 28
still picture . . . . . . . . . . . . . . .46
stop/p button . . . . . . . . . . . .25
stop/eject button . . . . . . . . . .22
super high speed searching . . .46
super long play . . . . . . . . .30, 63
button . . . . . . . .25, 42, 44-45
real-time counter . . . . . . . .42
rewind, power off . . . . . . .57
menu
button . . . . . . . . . . . . . . . .24
front panel button access . .22
mute button . . . . . . . . . . . . . .25
batteries . . . . . . . . . . . . . . . . . .5
blue background . . . . . . . . . . .47
brightness, adjusting . . . . .26-27
cable/dbs button . . . . .20-21, 25
channel
above 100 . . . . . . . . . . . . .24
adding . . . . . . . . . . . . . . . .11
buttons . . . . . . . . . .22, 24, 57
deleting . . . . . . . . . . . . . . .11
reviewing . . . . . . . . . . . . . .11
setup . . . . . . . . . . . . . . . . .10
clear button . . . . . . . . . . . . . .25
clock . . . . . . . . . . . . . . . . .12-17
closed caption system . . . .54-55
color, adjusting . . . . . . . . .26-27
combi button . . . . . . . . . . . . .25
connections . . . . . . . . . . . . . .6-7
contents, table of . . . . . . . . . . .4
controls
number buttons . . . . . . . . . . .24
one-touch recording . . . . . . . .31
pause/still button . . . . . . .25, 46
picture, adjusting . . . . . . . .26-27
play button . . . . . . . . . . . .22, 24
playback options . . . . . . . . . . .46
playing . . . . . . . . . . . . . . . . . .29
power
table of contents . . . . . . . . . . .4
tape
duplication . . . . . . . . . . . . .32
speed . . . . . . . . . . . . . .30, 63
time
setting . . . . . . . . . . . . . .12-17
zone . . . . . . . . . . . . . . . . . .19
timer recording
cancelling . . . . . . . . . . . . . .37
reviewing . . . . . . . . . . . . . .37
setting . . . . . . . . . . . . . .34-36
with vcr plus+ programming
system . . . . . . . . . . . . . .40-41
tint, adjusting . . . . . . . . . . .26-27
tracking . . . . . . . . . . . . . . . . .57
button . . . . . . . . . . . . .22, 24
cord . . . . . . . . . . . . . . . .7, 23
real-time counter memory . . .42
rear panel . . . . . . . . . . . . . . . .23
rec/otr button . . . . . . . . .22, 25
record light . . . . . . . . . . . . . .22
recording . . . . . . . . . . . . . . . .30
reminder . . . . . . . . . . . . . . . .60
remote
remote . . . . . . . . . . . . .24-25
tv/vcr . . . . . . . . . . . . . . . . .22
counter only mode . . . . . . . . .28
daylight-savings time . . . . . . . .18
defeat recording . . . . . . . . . . .33
duplication . . . . . . . . . . . . . . .32
control
buttons . . . . . . . . . .24-25
using . . . . . . . . . . . . . . . .5
locator . . . . . . . . . . . . . . . .59
sensor . . . . . . . . . . . . . . . .22
repeat play . . . . . . . . . . . . . . .43
rerecording . . . . . . . . . . . . . .32
rew(ind) button . . . . . . . . . . .22
rew(ind)/{ button . . . . . .25, 46
rewinding . . . . . . . . . . . . . . . .46
earphone jack . . . . . . . . . . . . .22
erasure prevention . . . . . . . . . .5
var.slow button . . . . . . . .25, 46
vcr plus+
/enter button . . . . . . . .25, 40
programming system . . .38-41
timer recording . . . . . . .40-41
video jack . . . . . . . . . . .7, 22, 32
volume bar . . . . . . . . . . . . . . .56
f.adv button . . . . . . . . . . .24, 46
fast forward search . . . . . . . . .46
f.fwd/B button . . . . . . . . .25, 46
f.fwd button . . . . . . . . . . . . . .22
front panel . . . . . . . . . . . . . . .22
warranty . . . . . . . . . . . . . . . . .66
glossary . . . . . . . . . . . . . . . . .63
safety precautions . . . . . . . . . .3
searching . . . . . . . . . . . . . . . .46
sensor (remote) . . . . . . . . . . .22
sharpness, adjusting . . . . . .26-27
skip search button . . . . . . . . .24
sleep timer . . . . . . . . . . . . . . .52
helpful hints . . . . . . . . . . . .64-65
hookups . . . . . . . . . . . . .6-7, 32
index search . . . . . . . . . . . . . .61
SUPPLIED ACCESSO RIES
The following items are supplied with your TV/VCR; they
are provided to help you use or set up your TV/VCR.
POWER
SLEEP/WAKE UP
REC/OTR
EJECT
SPEED
MEMORY
REW
PAUSE/STILL
PLAY
MENU
STOP
F.FWD
STATUS/EXIT
1
CLEAR
2
4
3
5
7
6
8
CH.
A.CH
CABLE/DBS
9
0
COMBI
VAR.SLOW
VOL.
TRACKING
VCR PLUS+
SMART
PICTURE
/ENTER
MUTE
F.ADV
SKIP
SEARCH
SLOW
INDEX
SEARCH
Remote Control 4835 218 37254
Three AA Batteries 4835 138 17012
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your
TV/VCR, but they are designed for use with your new
TV/VCR.
To order these optional accessories, contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
Monaural Audio and Video Cables (6 feet)
VHS Cassette Rewinder
#M61117
Color-coded for easy connection
#M61103
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
IB8130E003
Printed In Malaysia
0EMN01548 / T5014XQ * * * * *
As an ENERGY STAR® Partner, Philips Consumer Electronics
Company has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
This owner’s manual is made of recycled paper.
|