Quick Use and Setup Guide
HDTV Monitor
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.
Contents
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
See the User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Positioning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Mounting the Swivel to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Mounting the Swivel and TV to the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Making Basic Connections to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–5
Operating the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Using the On-screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
As an Energy Star® Partner, Philips Consumer Electronics has deter-
mined this product meets the Energy Star® guidelines for energy effi-
ciency. Energy Star® is a U.S. registered mark. Using products with
the Energy Star® label can save energy. Saving energy reduces air pollution and
lowers utility bills.
See the User Manual for Important Maintenance Information
In addition to providing information about safety, connecting accessory devices,
and using the TV’s features, the Directions for Use manual explains how to care
for and maintain your Cineos television. The TV contains air filters that must be
maintained and eventually replaced, and a lamp that eventually will need to be
replaced.
Air Filters
The air filters (located at the bottom of the TV) must be kept clean and free of
blockage.
NOTE: DO NOT operate the TV without the filters. Damage to the TV will occur.
Allow four to six inches of space behind the TV for air flow through the back
slots.
IMPORTANT: Excessive heat inside the TV resulting from inadequate ventilation
will cause the TV to shut down or not
to operate.
Keep the Directions for Use manual
accessible to correctly maintain and
care for your TV, as well as to
Lamp
understand and use its features.
An on-screen message will alert you when the lamp is nearing the end of its
expected lifetime so that you can change it before it wears out.
IMPORTANT: The TV will not operate if the lamp door is left open, and the TV
will shut down if the door is opened during operation.
Picture Settings
Your TV was set up at the factory for optimal showroom viewing. For optimal
home viewing change the Auto Picture setting to Natural. See page 34 in the
Direction for Use Manual.
Back of TV
Back of TV
T
IN
EXT
Ventilation Slots
Lamp Door
INT
EXT
DVI
G
S-VIDEO
L
R
V
Pr
R
Pb
L
Y
V
R
R
L
L
R
L
V
G
S-VIDEO
RGB+HV
R
R
L
L
Pr
Pr
Pb
Pb
Y
Y
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
The lamp door must be closed for the TV to operate.
Locations of Air Filters
IMPORTANT! InitialTV Setup
Please read this Quick Use and Setup Guide completely before
Language
Autoprogram
you turn on the TV.
Select your menu language with
the cursor up/down.
Press the OK key on the remote
control to confirm.
When you turn on your TV for the first time it will prompt you to enter
some setup information about Language preference and Channel program-
ming. See page 8 in this Quick Use and Setup Guide for more information
about these menus.
3135 035 21291
Mounting the Swivel andTV to the Stand
Install the plastic position pins in the stand.
1
2
Place the TV and mounted swivel on the stand, aligning the
front and sides of the TV with the front and sides of the
stand. This will help properly seat the TV on the position-
ing pins and align the pre-drilled holes on the stand and
swivel. You do not need the rubber bumpers and long
screws if you have already attached the swivel to the TV.
1
2
Positioning
Pins
Use the supplied screws (2) and screw key to fasten the swivel to
the stand. Install the back cover by sliding it up into the groove
above the opening, then slide into the lower groove.
Note: If accessories and cables protrude from the stand, leave the
back cover off.
3
4
Place accessory devices—HD satellite receiver, cable box, DVD
player, or VCR, for example—inside the stand. (See below and
Directions for Use manual for connection information.) Route the
power cords through the opening in the bottom of the stand shelf,
and route the connection cables through the openings in the back of
the stand.
Before swiveling the TV, make sure you have left enough slack in
the cords of any connected accessory devices. This will prevent
damage to the cords.
5
3
4
5
INT
EXT
NOTE:
DVI
G
S-VIDEO
L
R
V
Pr
R
Pb
L
Y
V
Installing these
screws
R
R
L
L
R
L
V
G
S-VIDEO
RGB+HV
R
R
L
L
Pr
Pr
Pb
Pb
Y
Y
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
reduces the
risk of the TV
sliding.
D
V
D
6
1
9
D
V
D
/
C
D
P
L
A
Y
E
R
OPEN/CLOSE
STOP
PLAY
PAUSE
STANDBY-ON
GUIDE
INFO
PREV
NEXT
POWER
SELECT
POWER
HIGH DEFINITION
Screws
Rubber Locators
Placing theTV on the Stand
without the Swivel
If you should decide not to purchase the optional swivel, you can
place the TV directly on the stand.
• First locate the nut and washer for each supplied rubber locator
(2).
• Place the rubber locators over the pre-drilled holes in the stand.
• Place the washer and nut on each rubber locator.
• Tighten each nut.
• Place the TV and mounted swivel on the stand, aligning the
front and sides of the TV with the front and sides of the stand.
This will help properly seat the TV. The rubber locators will
prevent the TV from sliding.
Making Basic Connections to theTV
CableTV
Back of TV
Connect the cable TV signal to the TUNER jack on the back of
the TV. See page 8 for details on using Autoprogram to store chan-
nels in the TV’s memory.
NOTE: This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
DVI
G
S-VIDEO
L
R
V
DVI
Pr
R
Pb
L
Y
V
G
S-VIDEO
L
R
V
Pr
R
Pb
L
Y
V
R
R
L
L
R
R
L
L
R
L
V
G
S-VIDEO
RGB+HV
Pr
Pr
Pb
Pb
Y
Y
R
R
L
L
Incoming
Cable TV
Signal
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
R
L
V
G
S-VIDEO
RGB+HV
Pr
Pr
Pb
Pb
Y
Y
R
R
L
L
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
Connect the incoming cable
TV signal to the TUNER
jack on the back of the TV.
3
Making Basic Connections to theTV
Cable Box with RF IN/OUT
Connect the incoming cable TV signal to the CABLE IN
Back of TV
jack on the back of the cable box.
Incoming
Cable TV
Signal
1
2
3
Connect a coaxial cable (not supplied) to the TO TV jack
on the back of the cable box and to the TUNER jack on the
back of the TV.
DVI
G
S-VIDEO
L
R
V
Set the Output Channel switch on the back of the cable box
to CH 3 or 4 (whichever is correct for your cable box),
then tune the TV to the corresponding channel. Once tuned,
change channels at the cable box, not the TV.
Back of Cable Box
(example only)
Pr
R
Pb
L
Y
V
R
R
L
L
NOTE: This connection will not supply stereo sound to the TV.
The reason is that the RF output on a cable box—labeled “TO
TV,” “OUT,” or “OUTPUT,” for example—will not send a stereo
signal to the tuner (VHF/UHF) input on a TV.
1
R
L
V
OUTPUT
CH
G
S-VIDEO
3
4
CABLE
IN
TO TV
RGB+HV
2
Pr
Pr
Pb
Pb
Y
R
R
L
L
STANDARD/
HD INPUTS
3
TUNER
Y
STANDARD/
HD INPUTS
Cable Box with A/V Outputs
Connect the incoming cable TV signal to a signal splitter
(not supplied).
1
The signal splitter enables you to avoid having to use the
TO TV jack on the back of the cable box. This jack will not
supply stereo sound to the TV.
DVI
G
S-VIDEO
R
L
V
Audio R (red)
Audio L (white)
Video (yellow)
NOTE: Your cable box may have a different label for the
TO TV jack, such as OUTPUT or OUT.
Pr
R
Pb
L
Y
V
3
4
R
L
L
OUTPUT
CH
Connect a coaxial cable (not supplied) to a connector on
the signal splitter and to the TUNER jack on the TV.
R
3
4
R
L
V
2
L
R
CABLE
IN
TO
TV
VIDEO
OUT
AUDIO
OUT
G
S-VIDEO
Connect a coaxial cable (not supplied) to a connector on
the signal splitter and to the CABLE IN jack on the back of
the cable box.
RGB+HV
Outputs
3
Input
1
2
Pr
Pr
P
R
R
L
L
STANDARD/
HD INPUTS
TUNER
Connect A/V cables (not supplied) to the VIDEO and
AUDIO L and R outputs on the back of the cable box and
to the AV2 video (labeled V) and audio (labeled L and R)
jacks on the back of the TV.
Pb
Y
STANDARD/
HD INPUTS
Incoming
Cable TV
Signal
4
Signal Splitter
(example)
To view programs from your cable box, first press the
Source button on the remote control.
TV
AV1:Other
AV2:Other
AV3:Other
AV4:Other
AV5:Other
AV6:Other
SIDE:Other
5
Source
OK
Press the Cursor Down or Up buttons until the AV2 signal
source is selected.
6
Press the OK button to confirm your selection. The AV2
input source becomes current for the viewing of cable TV
programs through your cable box.
7
NOTE: If your cable box Audio/Video outputs will not supply
video and stereo audio to the TV, you will need to make the
connection shown above in the example “Cable Box with
RF IN/OUT.”
5
7
6
Watching CableTV ProgramsThat
Don’t Require the Cable Box
Since you’ve connected the cable TV signal directly to the TV’s
tuner (step 2 above), you can also watch the unscrambled pro-
grams by simply tuning to the desired channel. You must first use
Autoprogram, however, to store channels in the TV’s memory.
See page 8.
6
NOTE: This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
ACITVE
SOUND CONTROL PICTURE
1 2
ZOOM
4
Making Basic Connections to theTV
Antenna
Connect the incoming antenna signal to the TUNER jack on the
back of the TV. See page 8 for details on using Autoprogram to
store channels in the TV’s memory.
Back of TV
NOTE: This connection will supply stereo sound to the TV if it is
being broadcast by the station you are watching.
DVI
G
S-VIDEO
L
R
V
DVI
Pr
R
Pb
L
Y
V
G
S-VIDEO
L
R
V
Pr
R
Pb
L
Y
V
R
R
L
L
R
R
L
L
R
L
V
G
S-VIDEO
RGB+HV
Incoming
Antenna
Signal
Pr
Pr
Pb
Pb
Y
Y
R
R
L
L
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
R
L
V
G
S-VIDEO
RGB+HV
Pr
Pr
Pb
Pb
Y
Y
R
R
L
L
STANDARD/
HD INPUTS
TUNER
STANDARD/
HD INPUTS
Connect the incoming
Antenna signal to the
TUNER jack on the
back of the TV.
Operating theTV
Your television has a set of buttons located on the top of the
cabinet for use when the remote control is not needed or
unavailable.
Press the Standby–On button to turn the TV on.
1
NOTES:
Due to the complexity and advanced design of the
Cineos TV, a turn-on time of 16 seconds should be expect-
ed.
When you turn the TV off, it remains in Active Standby
mode (orange light on) for 30 seconds and will not respond
to any presses of the remote control or cabinet buttons
during that time. This is to protect the lamp.
2
3
4 4 4
Press the VOLUME + (up) button to increase the sound
MENU
VOLUME
CHANNEL
level or the VOLUME – (down) button to lower the sound
2
level. Or use the buttons to navigate right or left when the
on-screen menu is displayed.
Cabinet Buttons
Press the CHANNEL K (up) or L (down) button to select
TV channels. Or use the buttons to navigate up and down
when the on-screen menu is displayed.
1
3
Active Control™ Plus+ Window
This window contains a sensor that monitors the ambient
light conditions in the room and adjusts key picture settings
for best viewing.
To access the on-screen menu, press the MENU button. To
navigate the menu, use the VOLUME + (up)/– (down) and
CHANNEL K (up)/L (down) buttons to navigate the menu
as described in the previous steps.
4
Remote Sensor Window
Receives commands from the remote control.
Active Standby Window
Active Standby—the condition in which the TV is either in
the process of turning on or off. Active Standby is entered by
pressing the Standby-On button 2 on the TV or remote
control. An orange light appears in the window. Active
Standby mode occurs when the TV is turned on—to allow
for the automatic calibration of the clock—and for 30 sec-
onds after the TV has been powered off. The 30-second
Active Standby period at power off is to protect the lamp.
During this time, the TV will not respond to presses of cabi-
net or remote control buttons.
HELPFUL HINT
The Cabinet button panel is protected during shipping by a
adhesive plastic film. You may peel this off and discard it.
On—the TV has picture and sound. A green light shows in
the window.
Standby—the condition in which the TV is plugged into the
AC outlet and is in the off state. No light is on in the win-
dow. The TV’s microprocessors and their standby supplies
are the only active components in this state, and the power
consumption is less than 1 watt.
5
Using the Remote Control
Remote Control
(shown from the bottom)
REMOTE CONTROL BATTERIES
To load the supplied batteries into the remote:
Remove the battery compartment door on the back of
1
the remote.
1
Place the batteries (2-AA) in the remote. Be sure the (+)
and (–) ends of the batteries line up correctly (the inside of
the case is marked).
HELPFUL HINT
When the batteries in your remote
control run low, the remote control
will send a “Battery low” command
to the TV. The TV will then display
a message on the screen reminding
you to replace the batteries as soon
as possible.
2
Reattach the battery compartment door.
3
2
Be sure to point the remote at the Remote Sensor window on the
front of the television when using the remote control to operate the
television.
3
REMOTE CONTROL BUTTONS
Source Select
Press to display a list of input source options—TV, AV1, AV2,
AV3–AV6, or Side. Use the Cursor Up/Down buttons to select the
next item, then press the OK button to confirm or press the Source
Select button to select the next item in the list. (See page 21 in the
Directions for Use.) The source becomes active on the TV screen.
Power–Standby
Press to turn the TV on or off. NOTE: The TV is never powered
off completely unless it is unplugged.
Alternate Audio
When you tune to a channel where SAP (Second Audio Program) is
available, you can toggle between Main and SAP. If not available,
only Main can be selected. (See page 42 in the Directions for Use.)
Mode (TV, CBL,VCR,AMP, HD, SAT, DVD, or CD)
Press one of these buttons to use the remote control in the TV, CBL,
VCR, or AMP mode as indicated above the button. A green indicator
lights up. Press the same button again more than 1 second to use the
remote control in the mode indicated below the button (HD, SAT,
DVD, or CD). A red indicator lights up. Press the button again more
than 1 second to return to the function named above the button. (See
pages 22–23 in the Directions for Use.)
VCR Prog (functional only inVCR mode)
Many VCRs have an automatic programming function. If your
VCR has this function, the universal code set will assign it to this
function. (See page 26 in the Directions for Use.)
Surround Sound
Press to toggle the sound modes Incredible Surround™ and Dolby*
Virtual. (See page 41 in the Directions for Use.)
Picture Format
EXIT
Press to display a list of available picture formats for showing video
images in the traditional 4:3 proportions. Press this button repeatedly
to select another picture format. Choose from Automatic, Super
zoom, Panoramic, 4:3, Movie expand 14:9, Movie expand 16:9, 16:9
subtitle, and Wide screen. (See pages 35–36 in the Directions for Use.)
Press this button to exit the menus provided by universal devices
such as VCRs, satellite receivers, DVD players, and so forth.
INFO +
Press to display (when available) information about the current
channel, program, source, number or name, local time, CC avail-
ability, SAP availability, program ratings, display format, sound
mode, and remaining length of a Sleeptimer setting.
NOTES:
•
With AV3–AV6 connections, the Automatic picture format option
is not available.
CC (Closed Captioning)
•
In Dual-screen mode, press the Picture Format button to switch
between a full or 4:3 letterbox picture format.
Press to select On, Off, or On with Mute. (See page 47 in the
Directions for Use.)
Natural Motion™
Cursor Up, Down, Right, and Left
Use to navigate the on-screen menu and make control adjustments
or settings.
Additionally, use these buttons to pan the screen up or down to
show any excluded parts of the picture. Left or right panning is
possible with the Side input source when “Game” is selected as the
type of source for the Side input. (See page 21 in the Directions for
Use manual.)
This button is not applicable to the Cineos Television. Select the
Digital Natural Motion™ option through the on-screen menu. (See
page 30 in the Directions for Use.)
Freeze Format
Pressing will apply one of the Freeze modes.
NOTE: The Freeze mode must be set using the TV’s on-screen menu.
Freeze mode stops action in the main screen. Sound will continue
to be heard. Press again to resume normal viewing.
Replay mode displays a few seconds of stored video in the
PIP window.
Photo Finish mode displays six stored frames from the picture.
Continuing to hold the Freeze Format button down will cycle the TV
through the Freeze modes: Freeze, Replay, and Photo Finish.
(See page 61 in the Directions for Use.)
Also use with the Dual Screen/PIP feature to select a screen or
reposition a PIP screen.
Menu
Press to display the TV’s on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two- or three-
digit channel, enter all numbers. Press a single-digit button and
hold for 1 second to directly access a single-digit channel. These
buttons can also be used to enter values in certain on-screen menu
controls.
DNR (Dynamic Noise Reduction)
Press this button repeatedly to select Off, Minimum, Medium, or
Maximum. (See page 32 in the Directions for Use.)
OK
Press to activate your choice or to confirm settings when in the menus.
Backlight
Volume (VOL)
Press + or – to adjust the volume.
Press this button on the right side of the remote control. The back-
lighting of the buttons VOL, CH, H, and the digit buttons stays on
for 5 seconds after pressing the button.
Mute
Press to interrupt or restore sound.
Active Control™ Plus
NOTE: Active Control™ Plus is not available for use with the
AV3, AV4, AV5, and AV6 input sources.
Surf (AutoSurf™)
If you set the Surf control in the TV’s on-screen menu to two chan-
nels, this button will allow you to toggle between the current chan-
nel and the last viewed channel. If you choose the nine-channel
Surf, pressing this button allows you to add and scroll up to nine of
your favorite channels. (See page 58 in the Directions for Use.)
Press to toggle the options Off, Minimum, Medium, and Maximum.
Maximum is the recommended option. (See page 27 in the
Directions for Use.)
Zoom
NOTE: Zooming is disabled in Dual Screen mode.
VCR
Press the Zoom button to activate the zoom function. Press the OK
button repeatedly to select one of the zoom magnifications (1x, 4x,
9x, or 16x). Additionally, you can shift the selected zoom window
over the screen with the Cursor Up, Down, Left, or Right buttons.
The zoom window is reset after selecting another TV channel,
another picture format, or when another display format is selected
automatically. Press the Zoom button again to turn off the zoom
function. (See page 28 in the Directions for Use.)
When the remote is in the VCR mode, these buttons will allow you
start a recording (G), rewind a tape (ᮤᮤ), stop the playback of a
tape (I), play a videotape (ᮣ), fastforward a videotape (ᮣᮣ),
use the VCR timer (y), or pause the playback of a videotape (❙ ❙).
(See page 26 in the Directions for Use.)
Sound (AutoSound™)
Press to select the next item in the AutoSound™ menu. The facto-
ry-set options are Speech, Music, Movies, and Multimedia, each
corresponding with specific settings of treble and bass. You can
also select the Personal option, which is based on the adjustments
you make through the Sound menu. (See page 46 in the Directions
for Use.)
Picture AutoPicture™)
Press to select the next item in the AutoPicture™ menu. The facto-
ry-set options are Rich, Natural, Soft, Multimedia, and Eco, each
corresponding with specific factory settings of Contrast, Color,
Sharpness, DNR, Dynamic Contrast, and Color enhancements. You
can also select the Personal option, which is based on the adjust-
ments or settings you make through the Picture menu. (See page 34
in the Directions for Use.)
Dual Screen/PIP (Picture-in-Picture)
Press to turn the PIP dual screen on or off. Continuing to hold the
Dual Screen/PIP button down will cycle through the Dual
Screen/PIP options. (See pages 59–60 in the Directions for Use.)
PIP Swap
Press to swap the main picture with the PIP window picture, or to
swap the left and right screens when in Dual Screen PIP mode.
Press again to restore pictures to their original position.
MultiPIP
The first press of this button displays PIP3 (the default option). A
long press of the button cycles through PIP3 and PIP6. Another
press turns PIP off.
Active Control, AutoPicture, AutoSound, AutoSurf, Incredible Surround,
and Natural Motion are trademarks of Philips Consumer Electronics.
Copyright 2003 Philips Consumer Electronics. All rights reserved.
*Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
6
Using the On-screen Menu
The TV’s on-screen menu controls are viewed within a
The first time you turn on the TV after purchasing it, it will be in a special mode designed to
inform you that you can change the menu language and on-screen displays to English, French, or
Spanish. Also included in this mode is Autoprogram to encourage you to have the set program
channels into the TV’s memory. For more details on the Language and Autoprogram features, see
page 8.
mobile map or pipe system. This system allows you to
move along linked paths tied to specific Feature Title cate-
gories (“TV,” “Picture,” “Sound,” “Features,” and
“Channels”). Each press of a Cursor button on the remote
moves the cursor control to balls indicating specific con-
trols. Each specific control may have multiple features that
can be adjusted or set. The animated on-screen menu struc-
ture will expand to show all available on-screen controls. As
it expands, it will display a series of balls grouped together
to reveal more controls.
Picture Sound Features Channels
Picture Sound Features Channels
TV
Settings
Demo
TV
Settings
Demo
Puck
Balls
Pipes represent the structure of the on-screen menu. They
Install
Install
Pipes
tie all the controls together and show the path you can fol-
low to access the available controls.
Feature Titles
or Controls
1
Balls indicate the titles of features or controls available on
this television. When highlighted, some of these controls
2
may show more Pipes and Balls, indicating subcategories
or lists of controls within the highlighted control. These
subcontrols will also have Pipes and Balls.
Picture Sound Features Channels
The Puck tells you which way movement may take place
within the on-screen menu. The arrows on the Direction
Indicator simulate the Cursor buttons on the remote control
(Up, Down, Left, or Right).
TV
Settings
Demo
3
1
2
3
The Slider controls will be displayed on some features,
allowing adjustments to the values of the controls. Some
may show a box containing a list of multiple options set-
tings. Others may have only an “On” or “Off” option.
6
5
Install
4
To navigate the on-screen menu, start by pressing the Menu
button on the remote control. This will display the on-
screen menu in its starting position.
5
6
Press the Cursor Down button to select any of the Setting,
Demo, or Install controls. Starting from the TV item, press
the Cursor Right button on the remote control to select any
of the Picture, Sound, Features, or Channel controls.
Picture Sound Features Channels
TV
6
Contrast
40
Brightness
Color
See the “Using the Demo Mode” and “Using the Installation
Features” on this page and the next. Refer to the Directions for
Use manual for all other control descriptions (Picture, Sound,
Features, Channels, or Settings).
4
ACITVE
SOUND CONTROL PICTURE
Sharpness
1 2
ZOOM
HELPFUL HINT
Pressing the Menu button once will display the on-screen menu.
Pressing the Menu button any time the on-screen menu is dis-
played will remove the on-screen menu from the TV screen.
Using the Demo Mode
Several features of this television can be placed in a demo
Picture Sound Features Channels
mode, which will show you how the feature works. Auto
Demo will automatically show all the feature demos one
after another except for the Dealer Demo mode. Specific
demo modes can be selected from the list of options within
the Demo control (Auto demo, Dual screen, PIP, and Install,
for example).
TV
Settings
Demo
TV
Settings
Demo
Auto demo
Dual screen
Freeze-Replay-Photo finish
Install
Main Menu
Picture
- - -
Install
Install
3
5
4
The Dealer Demo also has a sublist of the following
options: Digital options, Lightsensor, and 3D Y/C Comb
filter.
Press the Cursor Down button to see
more Demo Mode options.
Press the Menu button on the remote control to show the
on-screen menu.
Auto demo
Dual screen
Freeze-Replay-Photo finish
Install
Main Menu
Picture
- - -
1
2
3
4
Demo
1
2
Freeze-Replay-Photo finish
Install
Press the Cursor Down button repeatedly until “Demo”
is selected.
Demo
Main Menu
Picture
Active Control
Dealer demo
4
Press the Cursor Right button to shift the menu to display
the list of Demo mode options.
ACITVE
SOUND CONTROL PICTURE
Press the Cursor Down or Up button to select a Demo
mode option.
1 2
ZOOM
To see the Dealer Demo sublist,
press the Cursor Down button to
select Dealer Demo, then press the
Cursor right. Press the Cursor
Down or Up to select a mode, then
press the Cursor Right to activate
the mode.
Press the Cursor Right button to activate the Demo.
Dealer demo
Digital options
Lightsensor
3D Y/C Comb filter
5
7
Using the Installation Features
Language
When you plug in your TV for the first time it will prompt
you to set the Language and Autoprogam the channels.
Language
Autoprogram
For Spanish- and French-speaking TV owners, an on-screen
Language option is present. The Language control enables
you to set the TV’s on-screen menu to be shown in either
English, Spanish, or French.
Press the cursor down to select
your menu language
English
Français
Español
Press the Cursor Down button to select English, Español
(Spanish), or Francais (French).
2
1
Language
Autoprogram
After you have made your language selection, press the
OK button to confirm your selection.
OK
Select your menu language with
the cursor up/down.
2
English
3
Français
Español
Press the MENU button to remove the on-screen menu
from the TV screen or continue with Autoprogramming
below.
Press the OK key on the remote
control to confirm.
1
3
ACITVE
Language
Autoprogram
SOUND CONTROL PICTURE
HELPFUL HINT
The language you have chosen is
English
English
Français
Español
1 2
Remember, the Language control makes only the TV’s on-
screen Menu items appear in English, Spanish, or French text.
It does not change the other on-screen text features, such as
Closed Captioning (CC), with TV shows.
ZOOM
Autoprogram
Your TV can automatically set itself for local area (or cable
TV) channels. This makes it easy for you to select only the
TV stations in your area by pressing the CH + or – button
on the remote control.
Autoprogram
Autoprogram
Keep the prede-
fined automatic
detection of
cable or anntenna
or make your own
selection.
The TV will search for, find and store
all the available channels.
Press the cursor down to proceed.
Automatic
Install mode
Install
Install mode
Install
Press the Cursor Down button to select “Install” mode
control.
2
1
2
3
4
6
Press the Cursor Right button to display a list of Install
mode options: “Antenna,” “Automatic,” “Cable.”
Autoprogram
Autoprogram
Antenna
Automatic
Cable
Automatic
Install mode
Install
Install mode
Install
Press the Cursor Up or Down button to select one of the
options. Select “Antenna” for normal outside- or inside-
type antenna. Select “Cable” for a cable company sup-
plied signal. When “Automatic” is selected, the TV will
automatically set the mode based on the type of signal it
detects coming into the TV. The programming process
may be faster if you choose the specific type of connec-
tion you have made, either Antenna or Cable.
1
2
7
3
5
Autoprogram
Autoprogram
Install mode
Install
Install mode
Install
ACITVE
SOUND CONTROL PICTURE
Start
Searching
Press the Cursor Left button after making your “Install”
mode selection.
1 2
4
24 analog channels found
ZOOM
To Autoprogram Analog channels, press the right arrow.
Press the Cursor Down button to select “Install.”
5
Press the Cursor Right button to start the programming
process.
Autoprogram
6
Install mode
Install
Start
Press the Menu button to remove the on-screen menu from
the TV screen when the Autoprogramming process has fin-
ished.
60 analog channels found
Autoprogramming is complete
7
HELPFUL HINT
After Autoprogram is finished, check the results. Press the CH
(+) or (–) button on the remote control to see which channels
you can select. See page 51 in the Directions for Use manual
for instructions on removing channels.
8
|