Colour Television
29PT7322
29PT8322
34PT8322
User manual
Safety Inform ation
•
Disconnect mains plug when :
–
–
–
the red light below the TV screen is flashing continuously.
a bright white line is displayed across the screen.
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois
leather or soft cloth.
–
–
there is a lightning storm.
the set is left unattended for a prolonged period of time.
•
No naked flame sources, such as lighted candles, should be placed on top of the TV or
in the vicinity.
•
•
•
Do not place your TV set under direct sunlight or heat.
Leave at least 5 cm around each side of TV set to allow for proper ventilation.
Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain
or water.
•
No objects filled with liquids should be placed on top the TV so as to avoid dripping
or splashing of liquids on the set.
UsefulTips
•
•
•
Do not leave your set on standby mode for a prolonged period of time. Switch off set
to allow it to be demagnetised. A demagnetised set supports good picture quality.
Do not shift or move the set around when it is switched on. Uneveness in colour in
some parts of the screen may occur.
Never attempt to repair a defective TV yourself.Always consult a skilled service
personnel.
Recycling Directive – To minimise harm to the environment, the batteries supplied
with the TV set do not contain mercury or nickel cadmium. If possible, when dis-
posing of batteries, use recycling means available to you.Your TV set uses materials
which are reusable or which can be recycled.To minimise the amount of waste in the
environment, specialist companies recover used sets for dismantling and collection
of reusable materials (contact your dealer).
3
Below is a list of frequently occurred symptoms. Before you call for service, make these simple
checks. Some of these symptoms can easily be rectified if you know what to do.
Sym ptom
W hat you should do
Colour patch
• Switch off the TV by the mains power button.Wait for 20
(uneveness) minutes before switching on again.
• Check the TV is not placed too near speakers or magnetic
objects.
No power
No picture
• Check the TV’s AC power cord is plugged into the mains
socket. If there is still no power, disconnect plug.Wait for 60
seconds and re-insert plug. Switch on the TV again.
• Check the antenna connection at the rear of the TV.
• Possible TV station problem.Try another channel.
Good picture
but no sound
• Try increasing the volume.
• Check that the sound is not muted. If it is muted, press the
Mute button on the remote control to restore sound.
Good sound but poor
colour or no picture
• Try increasing the contrast and brightness setting.
Snowish picture and
noise
• Check antenna connection at the rear of the TV.
Horizontal dotted lines
• Possible electrical interference e.g. hairdryer, vacuum cleaner,
etc. Switch off appliances.
Double images or
“Ghost” images
• Possible poor positioning of antenna. Using a highly
directional antenna may improve reception.
TV not responding to
remote control handset
• Check life span of batteries of remote control handset.
• Aim remote control handset directly at remote control
sensor lens on the TV.
4
Antenna Connection
• Connect the aerial plug to the antenna socket ¬
on the backcover.
75
• Insert the mains plug into the wall socket.
Mains Connection
• For correct mains voltage, refer to type sticker at
the rear of the TV set
• Consult your dealer if mains supply is different.
Note:This diagram is not representative of the
actual plug and socket.
Switching on the Set
• Press the main power button to switch on/off the
TV.
• If the set is on standby (indicator is red), press the
Power button on the remote control to switch on
set.
• Insert the correct type of batteries into the
compartment.
• Ensure the batteries are placed in the right
direction.
5
AV sockets
on rear of
TV
OUT
OUT
OUT
Back of
VCR
ANTENNA
VIDEO
L
R
AUDIO
IN
IN
IN
VCR (Equipped withVideo
and Audio Output sockets
You can view the playback ofVCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO
andVIDEO INPUT sockets on the rear of theTV.
– Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and
VIDEO O UT sockets on the VCR.
AV sockets
on rear of
TV
Back of S-VHS VCR
The S-Video connection on the rear of theTV is used for the playback of S-VHS VCR tapes,Video Discs,
Video Games or Compact Disc-Interactive (cd-i) discs. Better picture detail and clarity is
possible with the S-Video playback as compared to the picture from a normal antenna (RF)
connection.
– Connect the S-VIDEO socket on the rear of the TV to the S-VHS O UT socket on a
S-VHS VCR.
– Connect the AUDIO IN sockets from the rear of the TV to the AUDIO O UT sockets
on the VCR.
Note : You need not connect the VIDEO IN socket of the TV if S-VIDEO IN socket is
connected.
6
Camcorder
Connect headphone jack to
socket for personal listening
For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick
and easy connections, particularly Camcorder tape recordings.
– Connect the S-VIDEO socket (if available) from the Camcorder to the Side S-VIDEO
socket of the TV. You need not connect the Side VIDEO IN socket of the TV if the
S-VIDEO socket is connected.
– Connect the AUDIO O UT sockets (Right and Left) from the Camcorder to the Side
AUDIO IN sockets.
AV sockets
on rear of
TV
Back of DVD
DVD (Equipped with “Y”,
“Pb” and “Pr” and Output
sockets)
You can view the playback of DVD discs by using the COMPONENTVIDEO INPUT sockets on the
rear of theTV.
– Connect the “Y”,“Pb” and “Pr” INPUT sockets on the TV to the “Y”,“Pb” and
“Pr” O UTPUT sockets on the DVD to view playback of DVD discs.
Note : “Y”, “Pb”, “Pr” sockets and AV1 sockets cannot be connected simultaneously.
7
Connection for recording from the TV channel
AV sockets
on rear of
TV
VCR (Equipped withVideo
and Audio Input sockets
– Connect the corresponding INPUT sockets of the VCR to the MO NITO R O UTPUT
sockets on the rear of the TV.
– To enhance the sound of your TV, connect the AUDIO L and R sockets to an external
audio system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Connection for recording from one VCR to another VCR
AV sockets on
rear ofTV
Back of
VCR
Back of
VCR
VCR (Equipped
withVideo and
Audio Input
sockets
VCR (Equipped
withVideo and
Audio Output
sockets
VCR 1
VCR 2
– Connect the sockets of the VCR which you wish to record from, to the corresponding
sockets at either AV1 or AV2..
– Connect the sockets of the receivingVCR to the MO NITO R O UTPUT sockets on the
rear of the TV.
8
Power button
Switch set off temporarily to standby mode. (The
red light indicator lights up when the set is on
standby mode).
To switch on set from standby mode, press Channel
+/– , Digit (0 -9) or Power button.
Teletext Colour buttons
In teletext mode, the colour buttons allow you to
access directly an item or corresponding pages.
Teletext buttons
Allows you to access teletext information. For
detailed description of functions, refer to section on
“Using the Teletext”
Sm iley button
Not applicable.
Tim er Button
Allows you to set the clock to switch to another
channel at a specified time while you are watching
another channel or when the set is on standby
mode.
Sm art Sound Button
Press the Smart Sound button repeatedly to access
4 different types of sound settings and choose your
desired setting.
Menu Button
Displays the main menu.Also exits menu from
screen.
Cursor Up Button
Allows you to select the next item on the menu.
Cursor Left Button
Allows you to select the sub-menus and adjust the
settings.
Volum e + / – Button
Increases or decreases volume.
4
Allows you to switch from Stereo to Mono sound
during stereo transmission or to choose between
language5or language6during dual sound
transmission.
A/CH(Alternate channel) Button
Allows you to change between the current channel
and the previous channel.
9
Main Index Button
Not applicable.
Frownie button
Not applicable
Sm art Picture Button
Press the Smart Picture button repeatedly to
access 5 different types of picture settings and
choose your desired setting.
Incredible Surround Button
Allows you to select Incredible Surround, *Virtual
Dolby® Surround and Stereo sound when
transmission is in stereo mode. DolbyVirtual
allows you to enjoy the sensation of Home Cinema
surround sound with just 2 front speakers.
Allows you to select Spatial Sound or Mono sound
when transmission is in mono mode.
1 Cursor Right Button
Allows you to access the sub-menus and adjust the
settings.
Cursor Down Button
Allows you to select the next item on the menu.
Channel + / – Buttons
Allows you to select channels in ascending or
descending order.
Mute Button
Mutes sound.To restore sound, press button again.
Teletext Button
Refer to section on “Using the Teletext”
O SD button
Allows you to display the current channel number.
It also allows to exit menu from the screen after
control adjustments.
Digit (0 -9) Buttons
Press to select a channel. For a 2-digit channel
number, press the first digit and followed
immediately by the second digit.
A/V Button
Allows you to select the AV channels.
Sleeptim er Button
Allows you to select a time period after which the
set will switch to standby mode automatically.
*Not applicable to 29PT7322. Dolby and the double-D
symbol are trademarks of Dolby Laboratories Licensing, Inc.
10
‘
§
(
&
é
“
&
Rem ote Sensor
Acts as a sensor for activating the controls of the
TV when remote control handset is aimed at it.
é
“
Standby Light indicator
Mains Power button
Volum e – / + button
Menu button
Indicate red light when standby mode is activated.
Switch mains power on or off.
‘
Adjust sound volume softer/louder.
(
Display the main menu on the TV screen.
Select channel in descending/ascending order.
§
Channel œ / o button
Note
• Press the Channel œ or o button to select the next item on the menu.
• Press the Volum e – or + button to access the sub-menus and adjust the settings.
11
O perating instructions generally explains the operation of the TV set using
the buttons on the rem ote control unless otherwise stated. Please read the
following instructions carefully and follow the steps as shown to fam iliarise
yourself with the installations and all features available in your set.
Before you tune in the channels by the AUTO STO RE method, select the menu language of
your choice.The LANGUAGE feature allows you to set the TV’s on-screen menu to be shown
in your desired language.
Step
Press button
Result on screen
1
Enter main menu.
É
•
•
•
•
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
COLOUR TEMP
Press button repeatedly until
INSTALL is selected.
2
•
•
•
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
É
•
CHANNEL EDIT
3
Enter INSTALL menu.
INSTALL
É
•
Ñ
LANGUAGE
ENGLISH
B.MELAYU
•
•
•
•
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
12
Result on screen
Step
Press button
4
5
INSTALL
Enter LANGUAGE m ode.
É
Ñ
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
•
ENGLISH
B.MELAYU
•
•
•
•
Select desired language.
Exit from language mode.
or
CHANNEL EDIT
6
7
8
INSTALL
É
•
Ñ
LANGUAGE
ENGLISH
B.MELAYU
•
•
•
•
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
Select AUTO STO RE.
INSTALL
•LANGUAGE
Ñ
É
•
AUTO STORE
SEARCH
•
•
•
MANUAL STORE
SORT
CHANNEL EDIT
Start automatic tuning.
INSTALL
Ñ
LANGUAGE
É
SEARCHING
•
•
•
•
AUTO STORE
MANUAL STORE
SORT
•
PLEASE WAIT
CHAN.FOUND 8
048.31 MHZ
CHANNEL EDIT
INSTALL
When tuning is completed,
exit menu from screen.
9
•LANGUAGE
Ñ
É
•
AUTO STORE
SEARCH
•
•
•
MANUAL STORE
SORT
CHANNEL EDIT
13
Manual tuning allows you to store each programme manually.
Result on screen
Step
Press button
Enter main menu.
1
2
•
•
•
PICTURE
SOUND
FEATURES
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
Press button repeatedly until
INSTALL is selected.
É
•
CHANNEL EDIT
INSTALL
3
4
Enter INSTALL menu.
•LANGUAGE
COLOUR SYSTEM
•
É
AUTO STORE
MANUAL STORE
•
SOUND SYSTEM
Ñ
SEARCH
CHANNEL
STORE
Press button repeatedly until
MANUAL STO RE is selected.
•
•
SORT
CHANNEL EDIT
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
5
6
Enter MANUAL STO RE menu.
É
•
Ñ
048.31MHZ
SEARCH
•CHANNEL
•STORE
Select SEARCH.
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
7
Start manual tuning of channel.
Searching stops once a transmitting
channel is found.
É
•
Ñ
196.25MHZ
SEARCH
•CHANNEL
•STORE
INSTALL
8
9
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
Select CHANNEL.
SEARCH
CHANNEL
•
Key in the desired channel number.
Ñ
É
•
18
•STORE
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
10
11
Select STO RE.
SEARCH
•
Store tuned channel. Note : If you
want to continue searching for
another transmitting channel, repeat
steps 7 to 11.
•
CHANNEL
STORE
Ñ
É
•
STORED
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
É
•
Ñ
196.25MHZ
SEARCH
•CHANNEL
12
Exit menu from screen.
•STORE
14
This feature allows you to select your desired CO LO UR and SO UND system. If AUTO
is selected, the respective colour and sound system will be automatically selected according
to the transmission system.
Note : Select your desired colour and sound system manually if reception is poor at AUTO
mode.
Result on screen
Step
Press button
Repeat step 1 to step 5 as in “MANUALTUNING O F CHANNELS”
CO LO UR SYSTEM is selected.
Enter CO LO UR SYSTEM mode.
6
7
INSTALL
MANUAL STORE
Ñ
COLOUR SYSTEM
•SOUND SYSTEM
•SEARCH
AUTO
PAL
•
Select the desired colour system.
SECAM
•CHANNEL
or
•STORE
INSTALL
MANUAL STORE
•
COLOUR SYSTEM
SOUND SYSTEM
Exit from colour system mode.
8
9
Ñ
AUTO
B/G
D/K
•
•
•SEARCH
•CHANNEL
•STORE
Proceed to select SO UND SYSTEM.
INSTALL
MANUAL STORE
•
Enter SO UND SYSTEM mode.
COLOUR SYSTEM
SOUND SYSTEM
10
11
Ñ
AUTO
B/G
D/K
•SEARCH
•CHANNEL
•STORE
Select the desired sound system.
or
INSTALL
MANUAL STORE
•
COLOUR SYSTEM
SOUND SYSTEM
•
12
13
Exit from sound system mode.
•SEARCH
•CHANNEL
É
•
Ñ
STORE
Press button repeatedly until
STO RE is selected.
INSTALL
MANUAL STORE
14
Store selected system.
•
COLOUR SYSTEM
SOUND SYSTEM
•
•SEARCH
•CHANNEL
É
•
Ñ
STORED
STORE
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
É
•
15
Ñ
Exit menu from screen.
196.25MHZ
SEARCH
•CHANNEL
•STORE
15
This feature allows you to adjust picture reception in areas of weak reception.
INSTALL
É
•
Ñ
LANGUAGE
ENGLISH
B.MELAYU
•
•
•
•
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
1. Enter main menu. 2. Select INSTALL. 3. Enter install menu.
Result on screen
Step
Press button
4
Press button repeatedly until
MANUAL STO RE is selected.
INSTALL
•LANGUAGE
COLOUR SYSTEM
•
É
AUTO STORE
MANUAL STORE
SORT
•
SOUND SYSTEM
SEARCH
•
•
•
CHANNEL
STORE
CHANNEL EDIT
5
INSTALL
MANUAL STORE
Enter MANUAL STO RE menu.
Ñ
COLOUR SYSTEM
É
•
AUTO
PAL
SECAM
•SOUND SYSTEM
•SEARCH
•CHANNEL
•STORE
6
7
Press button repeatedly until
FINE TUNE is selected.
INSTALL
MANUAL STORE
•SOUND SYSTEM
•SEARCH
Start fine-tuning until desired
picture and sound is obtained.
•CHANNEL
•STORE
or
Ñ
FINE TUNE
É
INSTALL
MANUAL STORE
8
9
Select STO RE.
•
COLOUR SYSTEM
SOUND SYSTEM
•
•SEARCH
Store last fine-tuned status.
•CHANNEL
É
•
Ñ
STORED
STORE
INSTALL
MANUAL STORE
•COLOUR SYSTEM
•SOUND SYSTEM
É
•
Ñ
196.25MHZ
SEARCH
•CHANNEL
10
•STORE
Exit menu from screen.
16
This feature allows you to change the channel number to your choice for a particular TV
station.
INSTALL
É
•
Ñ
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
ENGLISH
B.MELAYU
•
•
•
•
CHANNEL EDIT
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
4
Press button repeatedly until
INSTALL
SO RT is selected.
•LANGUAGE
FROM
TO
EXCHANGE
•
É
•
AUTO STORE
•
MANUAL STORE
SORT
É
•
•
CHANNEL EDIT
5
6
INSTALL
SORT
Enter SO RT menu.
É
•
Ñ
8
FROM
Key in the channel number in the
FRO M column, that is, the channel
you want to swap from.
•
TO
•EXCHANGE
INSTALL
SORT
7
8
Select TO .
FROM
TO
•
É
•
Ñ
6
Key in the channel number in the
TO column. that is, the channel
you want to swap to.
•EXCHANGE
INSTALL
SORT
9
Select EXCHANGE.
FROM
•TO
•
Ñ
É
•
EXCHANGED
EXCHANGE
10
Activate exchange of channels.
INSTALL
SORT
FROM
•
•TO
11
Exit menu from screen.
Ñ
É
•
EXCHANGE
17
This feature allows you to edit or skip channels which have bad or weak TV signal or channels
that you do not watch often.
Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or –
button.You can only access the channel by the DIGIT (0 -9) button.
INSTALL
É
•
Ñ
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
ENGLISH
B.MELAYU
•
•
•
•
CHANNEL EDIT
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
4
Press button repeatedly until
CHANNEL EDIT is selected.
INSTALL
•LANGUAGE
3
•
•
•
Ñ
AUTO STORE
MANUAL STORE
SORT
4
5
6
É
•
7
CHANNEL EDIT
Enter channel edit mode.
5
6
INSTALL
•LANGUAGE
3
•
•
•
Ñ
AUTO STORE
MANUAL STORE
SORT
4
5
6
Select the channel you want to skip.
or
É
•
7
CHANNEL EDIT
7
8
Activate skipped mode.
Exit menu from screen.
INSTALL
•LANGUAGE
3
•
•
•
Ñ
AUTO STORE
MANUAL STORE
SORT
4
5
6
É
•
7 SKIPPED
CHANNEL EDIT
How to add back channels
• Repeat steps 1 to 5 as in “Editing of Channels”.
• Select the channel you want to add back by the
(CURSO R UP) or
(CURSO R
DOW N) button.
• Press the
(CURSO R RIGHT) button to activate adding back of channel.
• Exit menu from screen by the
(O SD) button.
18
This feature allows a selection of 10 channels of pre-defined names. It also allows you to
enter a new name or modify an existing name of a channel for 40 channels including external
channels.
INSTALL
É
•
Ñ
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
ENGLISH
B.MELAYU
•
•
•
•
CHANNEL EDIT
1. Enter main menu. 2. Select INSTALL. 3. Enter install mode.
Result on screen
Step
Press button
4
Press button repeatedly until
INSTALL
•AUTO STORE
NAME is highlighted.
•
•
•
Ñ
MANUAL STORE
SORT
CHANNEL EDIT
É
•
8
NAME
Enter NAME mode.
5
6
INSTALL
•AUTO STORE
Select desired preset name and press
(CURSO R RIGHT) button
to store selected pre-set name.
•
•
•
Ñ
MANUAL STORE
SORT
CHANNEL EDIT
or
É
•
PERSONAL
NAME
INSTALL
•AUTO STORE
7
8
If you select PERSO NAL, move
to first character slot
•
•
•
Ñ
MANUAL STORE
SORT
CHANNEL EDIT
É
•
-
NAME
Press button repeatedly to cycle
through the characters and select
desired character.
Move to next character slot by the
(CURSO R RIGHT) button
and select in the next character.
(You can enter up to a maximum
of 5 characters)
or
INSTALL
•AUTO STORE
•
•
•
Ñ
MANUAL STORE
SORT
CHANNEL EDIT
É
•
LUCKY
NAME
INSTALL
•AUTO STORE
Store named channel.
Exit menu from screen.
9
•
•
•
Ñ
MANUAL STORE
SORT
CHANNEL EDIT
É
•
PERSONAL
NAME
10
19
The picture and sound menus allow you to make adjustments to the picture and sound. It also
allow you to select and activate other features in the menu.
1. Press the
2. Use the
(MENU) button to enter main menu.
or
(CURSO R UP / DOW N) buttons to select the items on the
PICTURE / SO UND menu.
3. Use the
or
(CURSO R LEFT / RIGHT) buttons to access the sub-menus.
Picture
m enu item s
Activities
PICTURE
É
Ñ
BRIGHTNESS
38
•
•
•
COLOUR
CONTRAST
SHARPNESS
Brightness
Colour
Increase or decrease brightness level.
Increase or decrease color level.
PICTURE
Contrast
Increase or decrease contrast level until
lightest parts of the picture show good detail.
•CONTRAST
•
•
•
Ñ
SHARPNESS
COLOUR TEMP
DIGITAL OPTIONS
Sharpness
Increase or decrease sharpness level to
improve detail in the picture.
DYN. CONTRAST
MIN
Colour Temp
Allows you a choice of 3 picture settings
(NORMAL,WARM and COOL).
* Digital Options Allows you to choose from Auto, Digital
Scan, Progressive Scan and 100Hz options.
Note
HUE feature is only ap-
plicable to NTSC pro-
grammes.The HUE item
will not appear on the menu
if programme is in PAL
mode.
Dynamic
Contrast
Allows you a choice of 3 settings (Minimum,
Medium and Maximum) to boost the con
trast level especially in dark scene so as to
make the picture more noticeable.
* Digital O ptions
– Digital Scan option improves background flickering.
– Progressive Scan option reduces line flickering resulting in sharper picture.
– 100Hz option is most appropriate for still pictures.
Note : Progressive Scan option is only available in NTSC transmission.
Sound
m enu item s
Activities
SOUND
É
Ñ
TREBLE
38
•
•
•
BASS
BALANCE
AVL
Treble
Bass
Increase or decrease the high frequency level.
Increase or decrease the low frequency level.
Balance
Adjusts the balance of the right and left
speakers’ sound output.
AVL
(Auto Volume
Leveller)
As variation in signal conditions can result a
sudden change in volume during in
commercial breaks or channel switching,
selecting the “ON” function will enable the
volume to remain at a standard volume level.
20
This feature automatically adjust settings for optimal picture quality continuously under
any signal conditions.To activate the Active Control feature, select the “O N” option in the
Active Control menu.
How to access the Active Control function
1. Press the
(MENU) button to enter main menu
and press the
(CURSO R DOW N) button
•
•
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
repeatedly until FEATURES is selected.
É
•
•
ROTATION
2. Press the
(CURSO R RIGHT) button to
FEATURES
enter FEATURES menu.
•
TIMER
Ñ
É
•
OFF
ACTIVE CTRL
CHILD LOCK
FORMAT
•
•
•
3. Press the
(CURSO R DOW N) button to
select ACTIVE CO NTRO L.
ROTATION
4. Press the
(CURSO R RIGHT) button
FEATURES
repeatedly to select O N option to activate the
Active Control function.
•
TIMER
Ñ
É
•
ON
ACTIVE CTRL
CHILD LOCK
FORMAT
•
•
•
ROTATION
5. Press the
(O SD) button to exit menu from screen.
21
The Timer feature allows you to set the timer to switch to another channel at a specified
time while you are watching another channel or when the TV is on standby mode.
Note : For the timer to function, the set must not be switched off. Once the set is switched
off, the timer is disabled.
Result on screen
Step
Press button
FEATURES
TIMER
Ñ
1
Enter TIMER menu.
TIME
É
•
--:--
•START TIME
•STOP TIME
•CHANNEL
•ACTIVATE
Enter TIME mode.
2
3
FEATURES
TIMER
Key in the current time For
example, if the current time
is 12:30, key digit 1 and 2 in the
hour column, followed by digit
3 and 0 in the minute column.
Ñ
TIME
É
•
12:30
•START TIME
•STOP TIME
•CHANNEL
•ACTIVATE
FEATURES
TIMER
Exit from TIME mode.
4
5
TIME
START TIME
•
Ñ
É
•
--:--
Select START TIME.
•STOP TIME
•CHANNEL
•ACTIVATE
Enter the START TIME mode.
6
7
FEATURES
TIMER
TIME
START TIME
•
Ñ
É
•
13:30
Key in the time you want the
programme to be switched on.
•STOP TIME
•CHANNEL
•ACTIVATE
FEATURES
TIMER
8
9
Exit from START TIME mode.
Select STO P TIME.
TIME
START TIME
STOP TIME
•
•
Ñ
É
•
--:--
•CHANNEL
•ACTIVATE
Enter STO P TIME mode.
10
11
FEATURES
TIMER
Key in the time you want the
programme to be switched off.
TIME
START TIME
•
•
Ñ
STOP TIME
É
•
15:30
•CHANNEL
•ACTIVATE
22
Result on screen
Step
Press button
Exit from STO P TIME mode.
12
FEATURES
TIMER
TIME
START TIME
•
•
Select CHANNEL.
13
14
•STOP TIME
Ñ
É
3
•
CHANNEL
•ACTIVATE
Key in the channel you want to
switch to.
FEATURES
TIMER
TIME
START TIME
•
•
•STOP TIME
Ñ
É
•
8
CHANNEL
•ACTIVATE
Select ACTIVATE.
15
16
FEATURES
TIMER
TIME
START TIME
•
•
•STOP TIME
•CHANNEL
Ñ
É
OFF
ONCE
ON
•
ACTIVATE
Activate timer.You can select
to activate timer by DAILY or
O NCE mode.
FEATURES
TIMER
TIME
START TIME
•
•
•STOP TIME
•CHANNEL
Ñ
É
•
ACTIVATE
17
18
Select DISPLAY.
FEATURES
TIMER
Select O N mode if you want to
display the current time on the
TV creen.
START TIME
STOP TIME
•
•
•CHANNEL
•ACTIVATE
Ñ
É
•
DISPLAY
19
Exit menu from screen.
Note
30 seconds before the timer is activated, a message indicating the time left for the chan-
nel switch will appear on the screen.To disable the channel switch, press any button on the
remote control.
23
The Child Lock feature allows you to lock channels to prevent your children from watching
programmes you deem undesirable.
Note :You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control. Keep the remote
control out of reach so as to prevent your children from having access to it.
FEATURES
É
TIME
•
•
•
•
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
START TIME
STOP TIME
CHANNEL
ACTIVATE
•
ROTATION
1. Enter main menu.
2. Select FEATURES . 3. Enter FEATURES menu.
Result on screen
Step
Press button
FEATURES
4
Select CHILD LO CK .
•
•
ACCESS CODE
----
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
•
ROTATION
FEATURES
5
6
Enter ACCESS CO DE mode.
•
ACCESS CODE
----
INCORRECT
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
•
Ñ
•
•
Key in access code 0711
(0711 is the default access code).
A message INCO RRECT will
appear.
ROTATION
FEATURES
Key in 0711 the second time.
When the message CO RRECT
appears, the CHILD LO CK
menu is now accessible.
•
ACCESS CODE
XXXX
CORRECT
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
•
7
Ñ
•
•
ROTATION
FEATURES
CHILD LOCK
You can now proceed to change
the access code of your choice.
Ñ
É
•
2
3
LOCK CHANNEL
•
CHANGE CODE
•CLEAR ALL
4
5
6
24
Result on screen
Step
Press button
FEATURES
CHILD LOCK
8
Select CHANGE CO DE.
ENTER
•LOCK CHANNEL
Ñ
NEW CODE
- - - -
CHANGE CODE
•CLEAR ALL
9
Enter CHANGE CO DE mode.
FEATURES
CHILD LOCK
•LOCK CHANNEL
Key in the access code of your
choice.
10
ENTER
Ñ
NEW CODE
X X X X
CHANGE CODE
•CLEAR ALL
Confirm access code.
11
FEATURES
CHILD LOCK
•LOCK CHANNEL
CONFIRM
CODE
Ñ
CHANGE CODE
X X X X
•CLEAR ALL
When the new code is confirmed,
the message CO RRECT will
appear.
FEATURES
CHILD LOCK
•LOCK CHANNEL
CONFIRM
CODE
Ñ
CHANGE CODE
X X X X
CORRECT
•CLEAR ALL
12
Exit menu from screen.
Note : After you have exit menu from screen and you want to enter child lock menu again,
you need to key the new access code only once. If you have forgotten the new access code,
key in 0711 twice to enter the child lock menu. Upon entering the child lock menu, you can
proceed to change code again.
25
FEATURES
É
TIME
•
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
•
START TIME
STOP TIME
CHANNEL
ACTIVATE
•
•
•
ROTATION
1. Enter main menu. 2. Select FEATURES. 3. Enter FEATURES menu.
Result on screen
Step
Press button
FEATURES
4
Select CHILD LO CK .
•
•
ACCESS CODE
----
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
•
ROTATION
5
6
Enter ACCESS CO DE mode.
FEATURES
Key in access code .
•
ACCESS CODE
XXXX
CORRECT
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
•
Ñ
•
•
ROTATION
Enter LO CK CHANNEL mode.
7
FEATURES
CHILD LOCK
Ñ
É
•
2
3
LOCK CHANNEL
CHANGE CODE
•
4
5
6
•CLEAR ALL
8
9
Select the channel you want to block.
or
Activate blocking of channel. A
keylock symbol will appear beside
the channel number indicating that
it is locked.
FEATURES
CHILD LOCK
Ñ
É
•
3
4
LOCK CHANNEL
•
CHANGE CODE
•CLEAR ALL
5
6
7
Exit menu from screen.
10
Note :You cannot have access to the locked channels via the top controls of the TV set.
You can only have access to the locked channels via the remote control.
When AV1 source is locked, CV1 source is automatically locked. Like-wise, if CV1 source is
locked, AV1 source is also automatically locked as they share the same audio input.
If you attempt to enter the INSTALL menu after locking a channel, a message
“Enter ACCESS CO DE” will appear on the screen.You need to enter the ACCESS CO DE
to enable you to enter the INSTALL menu.
26
To unlock channels that you have locked, enter the Child Lock menu and activate the
CLEAR ALL mode.
FEATURES
É
TIME
•
•
•
•
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
START TIME
STOP TIME
CHANNEL
•
ROTATION
ACTIVATE
1. Enter main menu. 2. Select FEATURES 3. Enter FEATURES menu.
Result on screen
Step
Press button
FEATURES
4
Select CHILD LO CK.
•
•
ACCESS CODE
----
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
•
ROTATION
Enter ACCESS CO DE mode.
5
6
FEATURES
•
ACCESS CODE
XXXX
CORRECT
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
•
Key in access code.
Ñ
•
•
ROTATION
Press button repeatedly until
CLEAR ALL is selected.
7
FEATURES
CHILD LOCK
•LOCK CHANNEL
•
CHANGE CODE
CLEAR ALL
Ñ
É
•
FEATURES
8
9
Activate clearing of all locked
channels.
CHILD LOCK
•LOCK CHANNEL
•
CHANGE CODE
CLEAR ALL
Ñ
É
•
CLEARED
Exit menu from screen.
Note
You can also unlock individual channel by the LO CK CHANNEL menu.
• Repeat step 1 to 7 as in “ACTIVATING THE CHILD LO CK (LO CK CHANNEL)”.
• Select the channel you want to unlock by the
buttons.
or
(CURSO R UP / DOW N)
• Press the
disappear).
(CURSO R RIGHT) button to unlock channel (the keylock symbol will
27
You can have a choice of different formats for your viewing pleasure, namely : - Auto,
EXPAND 4:3 mode, CO MPRESS 16:9 mode and 4:3 mode through the FO RMAT menu.
How to access the Screen Form at
1. Press the
and press the
repeatedly until FEATURES is selected.
(MENU) button to enter main menu
•
•
PICTURE
SOUND
FEATURES
INSTALL
TIMER
(CURSO R DOW N) button
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
ROTATION
2. Press the
(CURSO R RIGHT) button to
enter FEATURES menu.
3. Press the
(CURSO R DOW N) button
repeatedly until FO RMAT is selected.
FEATURES
•TIMER
4. Press the
(CURSO R RIGHT) button
repeatedly to cycle through the different formats
(Auto, Expand 4:3, Com press 16:9 or 4:3) and
select your desired format.
•
ACTIVE CTRL
•
CHILD LOCK
FORMAT
Ñ
É
•
AUTO
•
ROTATION
Note : You can also select your desired Screen Format
directly by the
(CURSO R UP) or
(CURSO R DOW N) button.
W hen to use the Screen Form ats
AUTO form at
Select AUTO format to display pictures in the
mode being transmitted.
EXPAND 4:3 form at
Select the EXPAND 4:3 format if you want
to expand movie images recorded in the let-
terbox format. When this format is selected,
the black horizontal bars at the top and bot-
tom are expanded thus filling up the entire TV
screen.
CO MPRESS 16:9 form at
Select the COMPRESS 16:9 format if you
want to compress full screen movie images
into letterbox format.When this format is
selected, black horizontal bars can be seen at
the top and bottom of the TV screen.
4:3 form at
Select the 4:3 format if you want to display
the 4:3 picture using the full surface of the
screen.
28
Due to the earth’s magnetic field and positoin of the TV set, slight tilting of the picture to the
left or right may occur when the set is switched on.When this phenomenon occurs, select
ROTATIO N in the FEATURE menu and adjust accordingly by the Cursor Right or Left
button.
How to use the Rotation Feature
•
•
PICTURE
SOUND
FEATURES
INSTALL
TIMER
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
1. Press the
(MENU) button to enter main menu
(CURSO R DOW N) button
and press the
ROTATION
repeatedly until FEATURES is selected.
2. Press the (CURSO R RIGHT) button to
enter FEATURES menu.
FEATURES
•TIMER
•
•
•
Ñ
ACTIVE CTRL
CHILD LOCK
FORMAT
3. Press the
(CURSO R DOW N) button
É
•
ROTATION
1
repeatedly until ROTATIO N is selected.
4. Press the
(CURSO R RIGHT) button
FEATURES
•TIMER
when picture is tilted to the left. Press button
until you deem picture is in normal position.
If picture is tilted to the right, press the
(CURSO R LEFT) button until you
•
•
•
Ñ
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
ROTATION
8
deem picture is in normal position.
Picture tilted to the left
After adjustm ent
Picture tilted to the right
After adjustm ent
29
Blue Mute feature indicates to you the absence of signalwhen the TV screen turns blue.To
activate the Blue Mute feature, select the “O N” option in the Blue Mute menu.
How to access the Blue Mute function
1. Press the
(MENU) button to enter main menu
•
•
PICTURE
SOUND
FEATURES
INSTALL
TIMER
and press the
repeatedly until FEATURES is selected.
(CURSO R DOW N) button
ACTIVE CTRL
CHILD LOCK
FORMAT
É
•
•
ROTATION
2. Press the
(CURSO R RIGHT) button to
FEATURES
enter FEATURES menu.
•ACTIVE CTRL
CHILD LOCK
•
•
•
Ñ
FORMAT
ROTATION
3. Press the
(CURSO R DOW N) button
É
•
OFF
BLUE MUTE
repeatedly until BLUE MUTE is selected.
4. Press the
(CURSO R RIGHT) button
FEATURES
to select O N option to activate the Blue Mute
function.
•ACTIVE CTRL
CHILD LOCK
•
•
•
Ñ
FORMAT
ROTATION
É
•
ON
BLUE MUTE
5. Press the
(O SD) button to exit menu from screen.
30
SMART PICTURE feature offers you a choice of 5 picture settings, namely, PERSO NAL,
RICH, NATURAL, SO FT and MULTIMEDIA.
SMART SO UND feature offers you a choice of 4 sound settings, namely PERSO NAL,
VO ICE, MUSIC and THEATRE.
Press
(SMART PICTURE) or
(SMART SO UND) button repeatedly to cycle
through the settings to select your desired mode.
Definition of Picture Settings
PERSONAL
RICH
PERSONAL
RICH
: Picture settings are set to your preference.
: Emphasize very vibrant colours.
(Suitable for AV mode in brightly-lit room)
: Emphasize original colours.
NATURAL
SOFT
: Emphasize “warm” colours.
(Suitable for dimly-lit room condition and
gives cinema-like effect when light is
switched off).
NATURAL
SOFT
MULTIMEDIA : Emphasize “soft” colours. (Suitable for
playing computer games, surfing, etc.)
Note : The PERSO NAL setting is the setting that you
set up using the Picture menu in the main menu.This
is the only setting in the Smart Picture settings that
can be changed. All the other settings are pre-set at
the factory.
MULTIMEDIA
Definition of Sound Settings
PERSONAL : Sound settings are set to your preference.
PERSONAL
VOICE
VOICE
: Emphasize high tone. (Treble boosted)
: Emphasize low tone. (Bass boosted)
MUSIC
THEATRE
: Emphasize sensation to action.
(Bass and Treble boosted)
MUSIC
THEATRE
31
If a TV channel broadcast contains teletext information, each channel that broadcasts teletext
transmits a page (index page) with information on how to use the teletext system, usually on
page 100.The system transmitted is indicated in the option line at the bottom of the screen.
Result on screen
Press button
Press the button once to switch on
teletext display. (A channel in which
teletext is being transmitted must be
selected).
Press the button the second time
superimpose the teletext page over
the TV programme.
Press the button the third time
to exit teletext mode.
O n/O ff teletext
and Superim pose
teletext
page over TV
program m e
Key in the required teletext page (3
digits).The page number is displayed
at the top left hand corner of the
screen. When the teletext page is
located, the counter stops searching.
If the counter keeps searching, it
means that the page is not available
for selection. If you make a mistake
in keying the page number, you
have to complete keying the 3-digit
number before re-keying the correct
page number.
Selecting a
teletext page
Press the CURSO R UP button
to display the next page and the
CURSO R DOW N button to
display the previous page.
Accessing a
teletext page
4
The 4-colour buttons allow you to
access directly an item or
Direct Access
to an item or
corresponding
pages
corresponding pages.
Not applicable.
Main Index
Enlarge
Press the button once to enlarge and
view the top half of the page.
Press the button the second time to
enlarge and view the bottom half of
the page. Press the button the third
time to return to normal size page.
32
Result on screen
Press button
Not applicable.
Hold
Not applicable.
Interrupt
For a teletext page with sub-
pages, press the Cursor Left
or Right button to access the
previous subpage or the next
subpage.
Selecting a sub-
page
Press the button once to reveal
hidden information (solutions
to puzzles, riddles, etc). Press
the button the second time to
conceal information.This button
is applicable only to teletext page
with puzzles, riddles, etc.)
Reveal/Conceal
How to select your favourite page
This feature allows you select 4 of your favourite or most commonly viewed page and stored
them in the favourite page selection.You can then access directly your favourite page by the
colour buttons without having to key in the page number.
1. Press the
2. Press the
(TELEXTEXT O N/O FF) button to enter teletext mode.
(MENU) button to enter favourite page selection. Note :The colour
alphabets at the bottom of the screen is now changed to page numbers.
3. Key in your favourite page by the (DIGIT 0 -9) buttons.
4. Press the (O SD) button to highlight pager numbers.
5. Select the colour button on your remote control you want your favourite page to be stored.
6. Repeat step 3 to 5 to select and store other favourite pages.
33
29PT7322
72 cm
29PT8322
72 cm
34PT8322
85 cm
Picture tube screen size
Picture tube visible area
68 cm
68 cm
80 cm
Audio Output :
Speaker
Subwoofer
2 x 10W RMS
–
2 x 10W RMS
10W
TV System
NTSC M
PAL B/G
PAL D/K
PAL I
SECAM B/G
SECAM D/K
SECAM KI
Playback System
480p
1080i
NTSC 3.58
NTSC 4.43
PAL 60
Set Dimensions :
Width
Depth
74.6 cm
49.3 cm
57.8 cm
74.6 cm
49.3 cm
57.8 cm
87.2 cm
55.8 cm
67.8 cm
Height
Net Weight of Set
(approximate)
44.5 kg
46 kg
68 kg
Note
For OperatingVoltage, Frequency, Power Consumption andVersion Number, refer to the
type number at the rear of the set.
34
3139 125 32361
|