Colour Television
29PT5683
Instructions for use
3139 125 26802
FUNCTIONS OF TV CONTROLS/SOCKETS
3
1
2
Mains Power button
Switch mains power on or off.
Standby light indicator
Indicate red light when standby mode is
activated.
PHILIPS
3
Remote Sensor
A
Aim remote control handset at remote
sensor when operating the TV.
2
1
3
4
5
Volume +/ – button
Adjust sound volume louder/softer.
P (Programme) + / – button
Select channel in ascending/descending order.
Note
•
•
You can enter the main menu by pressing both
the Volume + / – buttons at the same time.
Press Programme + / – button to select
sub-menu.
4
5
•
Press Volume + / – button to activate sub-menu.
A
K
K
L
L
6
AV3 in sockets
P
Connect to Output sockets of VCR/laser disc
player to the AV3 in sockets to playback
programmes.
7
8
9
Headphone socket
Connect headphone jack to socket for
personal listening.
Antenna socket
Connect the aerial plug to the antenna socket
on the backcover.
S-VIDEO
9
VIDEO
in
➠
6
S-Video In socket
L
AUDIO
R
Connect the S-VIDEO Output socket (if available)
of the VCR to the S-VIDEO in socket to enhance
picture quality.
n
7
10 AV1 In sockets
Connect the Output sockets of the VCR/laser disc
to the AV1 in sockets to playback programmes.
11 AV2 In sockets
Connect the Output sockets of the VCR/laser disc
to the AV2 in sockets to playback programmes.
12 Monitor out sockets
S-VIDEO
Connect the VIDEO out socket of the TV to the
Input socket of VCR to record programmes.
To enhance sound of your TV, connect the
AUDIO L and R sockets to an external audio
system.
9
VIDEO
L
AUDIO
R
in
AV1
in
AV2
out
Monitor
8
10
11
12
4
FUNCTIONS OF REMOTE CONTROL
1
SLEEPTIMER
Allows you to select a time period after which the set
will switch to standby mode automatically. You can
set the timer in steps of 15 minutes from OFF mode
up to a maximum of 120 minutes.
1
2
3
4
5
2
A/CH
n
v
o
r
2
3
PIP ON/OFF
Switch on or off PIP (Picture in Picture).
PIP UP PIP DOWN
p
A/CH (ALTERNATE CHANNEL)
Alternate between last viewed channel and present
channel.
2
5
8
0
1
3
6
4
4
5
PIP SWAP
9
7
SMART
SMART
Interchange channel on main screen and subscreen.
6
7
8
9
±
`
PIP SOURCE
MENU
SURF
Allows you to select various external connections for
PIP.
6
7
SMART SOUND
Allows you to select 4 types of sound settings
10
MENU
H
CH
A
Allows you to adjust picture and sound settings and
activate the features and install the channels
automatically.
11
12
AV
m
h
\
4
f
8
9
CURSOR UP
Allows you to select the sub-menus.
b
y
13
14
CURSOR LEFT
Allows you to access or adjust the sub-menus.
GAME
e
d
INCREDIBLE
`
INC. SURR.
10 VOLUME + / –
Increases / decreases volume.
11 AV
Selects AV1, S-VID1, AV2, AV3, S-VID3 and the last
viewed channel respectively. The correct channel
must be selected when viewing a playback
programme.
12 OSD (On-Screen Display)
Displays :
–
–
–
–
–
channel number.
remaining time of the sleeptimer.
programme name.
information line
transmission mode.
13 TELETEXT
Allows you to select teletext information.
14 INCREDIBLE SURROUND
Allows you to select incredible surround sound
when transmission is in stereo mode.
FUNCTIONS OF REMOTE CONTROL
5
15 POWER
Switch set off temporarily to standby mode.
(The red light indicator lights up when set is on
standby mode). To switch on set from standby
mode, press and hold button for a few seconds.
15
2
16
17
16 PIP POSITION
A/CH
n
v
o
r
Allows you to move the PIP screen to your desired
position.
17 PIP FREEZE
PIP UP PIP DOWN
p
18
19
2
5
8
0
1
3
6
Allows you to freeze or resume the PIP screen.
20
4
18 PIP DOWN
Selects a PIP channel in descending order.
9
7
SMART
SMART
19 PIP UP
21
22
±
`
Selects a PIP channel in ascending order.
MENU
SURF
20 DIGIT (0 - 9)
Allows you select a channel. For a 2-digit channel
number, the second digit must be entered before
the “ – “ sign disappears
23
24
21 SMART PICTURE
25
H
CH
A
Allows you to select 4 types of picture settings.
22 SURF
26
27
Allows you to select up to a maximum of 10
channels and view quickly the selected channels.
23 CURSOR RIGHT
AV
m
h
\
4
f
28
Allows you to access or adjust the sub-menus.
b
y
GAME
24 CURSOR DOWN
Allows you to select the sub-menus.
25 CHANNEL + / –
e
d
INCREDIBLE
`
INC. SURR.
29
30
Allows you to select channel in ascending or
descending order.
26 MUTE
Mutes sound. To restore sound, press button again.
27 TIMER
Not applicable.
28 4
Allows you to switch from Stereo to Mono sound
(stereo transmission) or to choose between
language5 and language 6.
29 INCREDIBLE PICTURE
Allows you to view a more vivid and realistic
picture with better contrast when the “ON”
function is selected.
30 GAME
Allows you to select Video mode as input for
video games.
6
ACCESSING THE MAIN MENU
The main menu allows you access to the PICTURE, SOUND, FEATURES and INSTALL
menus.
How to call up the main menu
MENU
SURF
Ñ
PICTURE
SOUND
BRIGHTNESS
COLOUR
FEATURES
INSTALL
CONTRAST
SHARPNESS
COLOUR TEMP
➠
1. Press the MENU button.
2. The main menu appears on the screen.
How to access the menus in the main menu
The 4 buttons (CURSOR DOWN, UP, LEFT and RIGHT) allow you to select the desired
menu, make adjustments and access the sub-menus.
MENU
SURF
MENU
SURF
MENU
SURF
MENU
SURF
➠
➠
How to exit from the menus
MENU
m
Press the
(OSD) button to exit menu from screen or press
(MENU) button
repeatedly to exit all menus from screen.
7
LANGUAGE SELECTION / AUTOMATIC TUNING OF TV CHANNELS
How to tune in the channels automatically (Auto Store)
Press button
Result on TV Screen
Ñ
Enter main menu .
MENU
PICTURE
SOUND
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
COLOUR TEMP
2
FEATURES
INSTALL
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
Press button repeatedly
until INSTALL is selected.
PICTURE
SOUND
4
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
FEATURES
Ñ
INSTALL
9
7
SMART
SMART
±
`
CHANNEL EDIT
MENU
SURF
INSTALL
Enter install menu.
Ñ
LANGUAGE
AUTO STORE
ENGLISH
B. MELAYU
MANUAL STORE
SORT
CHANNEL EDIT
H
CH
A
AV
m
h
\
4
f
Enter language mode.
INSTALL
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
Ñ ENGLISH
B. MELAYU
Select desired language
– ENGLISH, B. MELAYU
b
y
GAME
e
d
INCREDIBLE
`
or
.
INC. SURR.
CHANNEL EDIT
OR
INSTALL
LANGUAGE
Ñ
AUTO STORE
Go back to language
mode.
MANUAL STORE
SORT
CHANNEL EDIT
Select AUTO STORE.
INSTALL
AUTO STORE
Start automatic tuning.
Note : To interrupt
tuning, press MENU
button.
SEARCHING
PLEASE WAIT
CHAN. FOUND
8
Ñ
INSTALL
LANGUAGE
Ñ
AUTO STORE
MANUAL STORE
SORT
CHANNEL EDIT
m
Exit menu from screen.
8
MANUAL TUNING OF TV CHANNELS
How to tune in the channels manually (Manual Store)
Manual tuning of channels allows you to select your preferred programme number
for every available programme.
Press button
Result on TV Screen
MENU
Enter main menu
PICTURE
SOUND
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
2
FEATURES
INSTALL
Ñ
Press button repeatedly
until INSTALL is selected.
A/CH
n
v
o
r
PIP UP PIP DOWN
CHANNEL EDIT
p
2
5
8
0
1
3
6
4
9
7
SMART
SMART
INSTALL
Enter INSTALL menu
±
`
LANGUAGE
MENU
SURF
AUTO STORE
SYSTEM
MANUAL STORE SEARCH
Ñ
Press button repeatedly
until MANUAL STORE
is selected.
SORT
CHANNEL EDIT
CHANNEL
STORE
H
CH
A
AV
m
h
\
4
f
INSTALL
MANUAL STORE
Enter MANUAL STORE
menu. Press
button
Ñ
b
y
SYSTEM
SEARCH
CHANNEL
STORE
AUTO
again to enter SYSTEM
mode.
GAME
e
d
INCREDIBLE
`
INC. SURR.
NAME
Select the respective
INSTALL
MANUAL STORE
transmission – AUTO,
NTSC -M, SECAM-DK,
PAL -DK, PAL -I or PAL-BG.
Note : If AUTO is selected,
the respective colour system
will be automatically selected
according to the transmission
system.
Ñ
SYSTEM
SEARCH
CHANNEL
STORE
NTSC -M
OR
NAME
INSTALL
MANUAL STORE
Go back to MANUAL STORE.
menu
SYSTEM
Ñ
SEARCH
062.25 MHZ
CHANNEL
STORE
NAME
Highlight SEARCH.
4
......MANUAL TUNING OF TV CHANNELS
Press button
9
Result on TV Screen
INSTALL
MANUAL STORE
Enter MANUAL STORE
menu.
SYSTEM
Ñ
SEARCH
CHANNEL
STORE
062.25 MHZ
2
A/CH
n
v
o
r
Enter MANUAL STORE
NAME
PIP UP PIP DOWN
p
mode.
2
5
8
0
1
3
6
4
INSTALL
MANUAL STORE
Start searching for the next
transmitting channel.
Searching stops once a
transmitting channel is found.
9
7
SMART
SMART
±
`
SYSTEM
SEARCH
CHANNEL
STORE
Ñ
196.25 MHZ
MENU
SURF
OR
NAME
H
CH
A
INSTALL
MANUAL STORE
AV
m
h
\
4
f
Go back to MANUAL STORE
menu.
SYSTEM
SEARCH
Ñ
CHANNEL
STORE
NAME
3
b
y
GAME
Highlight CHANNEL.
e
d
INCREDIBLE
`
INC. SURR.
INSTALL
MANUAL STORE
1
4
2
5
8
0
3
6
Key in the desired channel
number.
7
9
SYSTEM
SEARCH
SMART
SMART
±
`
Ñ
CHANNEL
8
STORE
NAME
INSTALL
MANUAL STORE
Highlight STORE.
SYSTEM
SEARCH
CHANNEL
Ñ
STORE
NAME
INSTALL
MANUAL STORE
Store tuned channel.
To continue searching for
the next transmitting
channel, repeat all the above
steps.
SYSTEM
SEARCH
CHANNEL
STORE
Ñ
196.25 MHZ
NAME
Exit menu from screen.
m
FINE TUNING OF TV CHANNELS
1 0
How to do fine tuning
This feature allows you to adjust the picture reception in area of weak reception.
Press Button
Result on TV Screen
1
4
2
5
8
0
3
6
Select the channel you
want to fine-tune.
8
7
9
SMART
SMART
±
`
2
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
MENU
Enter main menu.
PICTURE
SOUND
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
9
7
FEATURES
SMART
SMART
Ñ
INSTALL
Press button repeatedly
until INSTALL is selected.
±
`
CHANNEL EDIT
MENU
SURF
INSTALL
Enter INSTALL menu.
LANGUAGE
AUTO STORE
H
CH
A
SYSTEM
MANUAL STORE SEARCH
Ñ
Press button repeatedly
until MANUAL STORE
is selected.
SORT
CHANNEL EDIT
CHANNEL
STORE
AV
m
h
\
4
f
b
y
INSTALL
GAME
MANUAL STORE
e
d
INCREDIBLE
`
Enter MANUAL STORE
menu .
INC. SURR.
CHANNEL
STORE
NAME
Press button repeatedly
until FINE TUNE is
selected.
Ñ FINE TUNE
Start fine-tuning until
desired picture and sound
is obtained.
INSTALL
MANUAL STORE
Press button repeatedly
until STORE is selected.
SEARCH
CHANNEL
Ñ
STORE
NAME
INSTALL
MANUAL STORE
Store last fine-tuned
status.
SYSTEM
Ñ
Ñ
SEARCH
224.25 MHZ
CHANNEL
STORE
m
Exit menu from screen.
NAMING OF CHANNELS
1 1
This feature allows a selection of 20 channels for preset names. It also allows you to
enter a new name or modify an existing name of a channel including external channels.
How to name channels
Press button
Result on TV Screen
MENU
Enter main menu.
PICTURE
SOUND
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
2
FEATURES
INSTALL
Ñ
Press button repeatedly
until INSTALL is selected.
A/CH
n
v
o
r
CHANNEL EDIT
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
9
7
INSTALL
SMART
SMART
Enter INSTALL menu
±
`
LANGUAGE
AUTO STORE
SYSTEM
MANUAL STORE SEARCH
MENU
SURF
Press button repeatedly
until MANUAL STORE
is selected.
Ñ
SORT
CHANNEL EDIT
CHANNEL
STORE
H
CH
A
Enter MANUAL STORE
menu.
INSTALL
MANUAL STORE
AV
m
h
\
4
f
CHANNEL
STORE
b
y
Press button repeatedly
until NAME is selected.
Ñ
GAME
NAME
FINE TUNE
e
d
INCREDIBLE
`
INC. SURR.
INSTALL
MANUAL STORE
3
Enter name mode.
CHANNEL
STORE
NAME
Ñ PERSONAL
FINE TUNE
INSTALL
MANUAL STORE
3PRG1
Select preset name.
CHANNEL
STORE
NAME
PRG 0
Ñ PRG1
OR
FINE TUNE
..... NAMING OF CHANNELS
1 2
Press button
Result on TV Screen
If you select PERSONAL,
move to first character
slot.
INSTALL
MANUAL STORE
2
CHANNEL
STORE
A/CH
n
v
o
r
Ñ
Ñ
PIP UP PIP DOWN
NAME
FINE TUNE
p
2
5
8
0
1
3
6
4
9
7
SMART
SMART
Key in selected character.
Move to next character
slot and key in the next
INSTALL
MANUAL STORE
±
`
MENU
SURF
CHANNEL
STORE
NAME
OR
character by the
button.
Ñ
Ñ
L
(You can key up to a
maximum of 5 characters)
FINE TUNE
H
CH
A
AV
m
h
\
4
f
Enter name you have
keyed in.
INSTALL
MANUAL STORE
MENU
b
y
CHANNEL
GAME
STORE
NAME
FINE TUNE
e
d
INCREDIBLE
`
Ñ
INC. SURR.
8 LUCKY
INSTALL
MANUAL STORE
Select STORE.
SEARCH
CHANNEL
Ñ
STORE
NAME
INSTALL
MANUAL STORE
Activate store mode
to store name.
SYSTEM
SEARCH
Ñ
224.25 MHZ
CHANNEL
STORE
Exit menu from screen.
m
SORTING OF CHANNELS
1 3
This feature allows you to change the channel number to your choice for a particular
TV station.
How to sort channels
Press button
Result on TV screen
Enter main menu.
MENU
PICTURE
2
SOUND
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
FEATURES
Ñ
A/CH
INSTALL
n
v
o
r
Press button repeatedly
until INSTALL is selected.
PIP UP PIP DOWN
p
CHANNEL EDIT
2
5
8
0
1
3
6
INSTALL
4
Enter INSTALL menu.
9
7
LANGUAGE
AUTO STORE
SMART
SMART
±
`
MANUAL STORE FROM
Press button repeatedly
until SORT is selected.
Ñ
SORT
CHANNEL EDIT
TO
OK
MENU
SURF
INSTALL
SORT
Enter sort menu
H
CH
A
1
4
2
5
8
0
3
6
Ñ FROM
TO
8
5
Key in the desired
channel number
to be changed from.
7
9
SMART
`
SMART
AV
m
h
\
4
f
±
OK
b
y
INSTALL
SORT
Select TO.
GAME
e
d
INCREDIBLE
`
INC. SURR.
Key in the desired
channel number you
want to exchange to.
1
4
2
5
8
0
3
6
FROM
8
2
Ñ TO
OK
7
9
SMART
`
SMART
±
INSTALL
SORT
Select OK.
FROM
8
TO
2
Ñ OK
INSTALL
SORT
Activate exchange of
channels.
FROM
8
TO
2
Ñ OK
INSTALL
SORT
FROM
TO
Ñ EXCHANGED
2
8
m
Exit menu from screen.
EDITING OF CHANNELS
This feature allows you to edit or delete channels which have bad or weak TV signal
or channels that you do not watch often.
1 4
Note : Once a channel is edited, you cannot have access to the deleted channels by
the CH (Channel) + or – button. You can only call up the channel by the DIGIT (0 - 9)
button.
How to delete channels
Press button
Result on TV Screen
Enter main menu.
MENU
PICTURE
SOUND
2
LANGUAGE
AUTO STORE
MANUAL STORE
SORT
FEATURES
Ñ
A/CH
INSTALL
n
v
o
r
Press button repeatedly
until INSTALL is selected.
PIP UP PIP DOWN
p
CHANNEL EDIT
2
5
8
0
1
3
6
4
INSTALL
9
7
SMART
SMART
Enter INSTALL menu.
LANGUAGE
±
`
AUTO STORE
MANUAL STORE
SORT
MENU
SURF
Select CHANNEL EDIT.
CHANNEL
DELETED
Ñ
CHANNEL EDIT
INSTALL
Enter CHANNEL EDIT menu.
CHANNEL EDIT
H
CH
A
1
4
2
5
8
0
3
6
Key in the desired channel
to be deleted.
AV
m
h
\
4
f
Ñ CHANNEL
ADDED
2
7
9
SMART
`
SMART
±
b
y
GAME
e
d
INCREDIBLE
`
INSTALL
CHANNEL EDIT
INC. SURR.
Select ADDED.
CHANNEL
Ñ DELETED
Activate edit mode.
Exit menu from screen.
m
How to add back channels
Enter CHANNEL EDIT menu
1
4
2
3
6
5
8
0
Key in the channel to be
added.
7
9
SMART
`
SMART
±
INSTALL
CHANNEL EDIT
Select DELETED.
CHANNEL
Ñ ADDED
Activate edit mode to add
back channel.
1 5
PICTURE AND SOUND ADJUSTMENTS
The picture and sound menu allows you to make adjustments to the picture and
volume level.
MENU
1
Press
(MENU) button to enter main menu.
2
Use the
(CURSOR UP) or (DOWN) buttons to select the PICTURE or SOUND
menu and the
(CURSOR LEFT) or
(RIGHT) buttons to make adjustments
or access the sub-menus.
m
3
Press
(OSD) button to exit all menus from screen.
PICTURE
Picture menu item Selection
38 BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
Brightness
Colour
Increase/decrease level
Increase/decrease intensity
COLOUR TEMP
÷
÷
Contrast
Increase/decrease level
Increase/decrease level
Choice of 3 colour tones
Sharpness
Colour temp
SOUND
Sound menu item Selection
28 TREBLE
BASS
BALANCE
AVL
Treble
Bass
Increase/decrease level
Increase/decrease intensity
Increase/decrease level
Refer to section on AVL
Balance
AVL
*
* AVL (Auto Volume Leveller)
Auto Volume leveller adjusts volume level automatically to a standard level when
you experience sudden change in volume during commercial break or channel
switching due to the variation in signal conditions.
FEATURES (LOCK FEATURE)
1 6
The FEATURES menu allows you access to the LOCK, MESSAGE and DNR (Dynamic
Noise Reduction) features.
LOCK feature allows you to lock all channels except for one selected channel. When
“ON” mode s selected in the LOCK menu, the TV can only be switched on with the
remote control. The P (Programme) + / – buttons on top of the TV cannot be used to
select a TV channel. The remote control must be kept out of reach to prevent any
unauthorised use of your TV.
How to use the Lock feature
Press button
Result on TV Screen
8
1
4
2
5
8
0
3
Select channel that
you want to view.
6
9
SMART
`
2
7
SMART
±
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
4
Enter main menu .
9
7
PICTURE
MENU
SMART
SMART
SOUND
±
`
Ñ
FEATURES
INSTALL
LOCK
MESSAGE
DNR
MENU
SURF
Press button repeatedly
until FEATURES is selected.
PIP
H
CH
A
Enter FEATURES menu
FEATURES
and press
again to enter LOCK
mode.
button
AV
m
h
\
4
f
Ñ
OFF
LOCK
MESSAGE
DNR
b
y
PIP
GAME
e
d
INCREDIBLE
`
INC. SURR.
Select ON mode to
FEATURES
lock channels.
Ñ
LOCK
MESSAGE
DNR
ON
OR
Note : To unlock channels,
select OFF mode. Ensure
you do not lose your
remote control as you
can ONLY unlock all the
channels through the
remote control.
PIP
Exit menu from screen.
m
FEATURES (MESSAGE FEATURE)
Message feature
1 7
This feature allows you to key in a message. The message will be displayed on the
screen when the set is switched on. When the set is on standby mode, the standby
light indicator will start flashing indicating there is a message.
Note : For message to disappear from screen, press MENU button on the remote
control.
How to use the message feature
Press button
Result on TV Screen
Enter main menu.
MENU
PICTURE
2
SOUND
Press button repeatedly
until FEATURES is selected.
Ñ
FEATURES
INSTALL
LOCK
MESSAGE
DNR
A/CH
n
v
o
r
PIP UP PIP DOWN
p
PIP
2
5
8
0
1
3
6
Enter FEATURES menu.
4
FEATURES
9
7
Select MESSAGE.
SMART
SMART
LOCK
Ñ
±
`
MESSAGE
DNR
PIP
LINE 1
LINE 2
CLEAR
MENU
SURF
Enter MESSAGE menu.
FEATURES
MESSAGE
Press
button again
to enter message line.
H
CH
A
Ñ
Key in alphabet or number
to be displayed at the
current position. To move to
next character position,
CLEAR
AV
m
h
\
4
f
FEATURES
MESSAGE
OR
b
y
GAME
press
button.
Ñ
G
LINE 2
CLEAR
Ñ
e
d
INCREDIBLE
`
INC. SURR.
If there is not enough space
to fill in the whole message,
MENU
press
button to go back
message menu followed by
button to select the next message
line (LINE 2). Press
button to
enter message line and continue
keying of message.
Activate message. The message
will only be displayed on the screen
after the set is switched off and
on again.
MENU
Note: If you want to clear the whole
message, select CLEAR in the message
menu and press
message.
button to delete
m
Exit menu from screen.
FEATURES (PICTURE-IN-PICTURE)
1 8
Picture In Picture feature allows you to call up a subscreen within your main screen
which enable you to watch two channels at the same time.
How to start PIP function
• Switch on PIP mode.
8
2
(A normal size PIP
screen appears)
A/CH
n
v
o
r
UP PIP DOWN
• Press button second
time to change normal
size PIP screen to a
smaller size.
8
p
• Press button the third
time to switch off PIP
screen.
AV3
AV2
How to select PIP Source
5
S-VID1
5
• Press button repeatedly
to cycle through the various
external connection and select
the desired PIP source
(AV1, S-VID1, AV2, AV3,
S-VID3 and the last viewed
channel).
2
A/CH
n
o
r
PIP UP PIP DOWN
p
v
• Press PIP UP or PIP DOWN
button to select a PIP channel
in ascending or descending
order.
2
A/CH
n
v
o
r
PIP UP PIP DOWN
p
How to freeze the PIP screen
• Press button once to freeze
the PIP screen.
2
Freeze
PIP
AV1
A/CH
n
o
r
Freezing the PIP screen allows
you to view a programme in
the still mode. For example,
you may want to write down
some information from the PIP
screen, freezing the screen will
allow you time to do so before
the moving picture changes.
PIP UP PIP DOWN
p
v
Unfreeze
PIP
V1
• Press the button the second
time to unfreeze the PIP screen.
Features (PICTURE-IN-PICTURE)
How to position the PIP screen
1 9
• Press button repeatedly to move PIP
screen to your desired position.
2
A/CH
n
v
o
r
PIP UP PIOWN
p
How to swap PIP screen with
the television screen
• Press button to interchange the PIP
screen and the television screen
5
2
A/CH
n
v
o
r
PIP UP PIP DOWN
8
p
How to adjust PIP picture settings
You can adjust TINT settings through the PIP menu.
(Applicable for NTSC programmes only)
2
A/CH
p
1
Press button
Result on TV
n
o
r
PIP UP PIP DOWN
v
Enter main menu.
MENU
2
5
8
0
3
6
PICTURE
SOUND
4
Ñ
FEATURES
INSTALL
LOCK
MESSAGE
DNR
9
7
SMART
SMART
Press button repeatedly
until FEATURES is selected.
±
`
PIP
MENU
SURF
PICTURE
Enter the FEATURES
menu
LOCK
MESSAGE
DNR
Ñ
H
CH
A
PIP
Press button repeatedly
until PIP is selected.
AV
m
h
\
4
f
FEATURES
PIP
b
y
Enter the PIP menu.
GAME
e
d
INCREDIBLE
`
INC. SURR.
28 TINT
Adjust setting.
Exit menu from screen.
m
USING THE SURF FEATURE
2 0
This feature allows you to select up to a maximum of 10 channels and view quickly
the selected channels.
How to add a channel to the surf list
Press button
Result on TV Screen
1
1
4
2
5
8
0
3
6
SURF
8
Key in the channel number
you want to add to the surf
list.
7
9
SMART
`
SMART
±
2
THE SURF LIST
IS EMPTY
A/CH
n
v
o
r
PIP UP PIP DOWN
p
SURF
Enter the SURF menu.
PRESS ˙ TO ADD
2
5
8
0
1
3
6
SURF
8
4
Add selected channel to the
surf list. Repeat the above 2
steps to add more channels
to the surf list.
9
7
SMART
SMART
±
`
PRESS ˙ TO DELETE
MENU
SURF
Exit menu from screen.
m
H
CH
A
How to delete a channel from the surf list
AV
m
h
\
4
f
1
Enter the SURF menu.
SURF
SURF
b
y
8
3
6
9
7
GAME
e
d
INCREDIBLE
`
INC. SURR.
Press button repeatedly to
cycle through the surf list
and select the channel you
want to delete.
SURF
PRESS ˙ TO DELETE
SURF
3
6
9
7
Delete selected channel from
the surf list. Repeat the above
steps if you want delete more
channels fom the surf list.
PRESS ˙ TO DELETE
Exit menu from screen.
m
How to activate SMART SURF
SURF
Press button repeatedly to
SURF
8
3
6
9
7
cycle through the selected
channels in the surf list and
select the channel you want
to view
PRESS ˙ TO DELETE
NICAM STEREO / 2CS STEREO/INCREDIBLE SURROUND
This feature is only applicable if the TV broadcast is transmitted in NICAM Stereo
2 1
or 2CS Stereo.
• Press 4 button to toggle
between NICAM STEREO (STEREO)
and MONO.
AV
m
h
\
4
f
MONO
b
GAME
e
d
INCREDIBLE
`
NICAM STEREO
(STEREO)
INC. SURR.
• Press 4 button to toggle
between NICAM DUAL I (DUAL I)
or NICAM DUAL II (DUAL II) when
a programme is broadcasted
in 2 languages.
NICAM DUAL I
(DUAL I)
NICAM DUAL II
(DUAL II)
Incredible Surround
This feature allows you to hear a surround acoustic sound effect on stereo sound
reception or playing back stereo programmes via AV mode.
• Press INC SURR (Incredible Surround)
AV
m
h
\
4
f
button to toggle between STEREO or
INCREDIBLE SURROUND when
transmission is in stereo mode.
STEREO
b
y
GAME
e
d
INCREDIBLE
`
INC. SURR.
INCREDIBLE SURROUND
• Press INC SURR (Incredible Surround)
button to toggle between MONO
or SPATIAL when transmission is
MONO
in mono mode.
SPATIAL
SMART CONTROLS
Smart Picture
2 2
Smart Picture offers you a choice of 4 picture settings – PERSONAL, RICH, NATURAL
and SOFT.
SMART
SMART
±
`
0
PERSONAL
RICH
MENU
SURF
➠
NATURAL
• Press SMART (Picture) button repeatedly to cycle
through the 4 settings to select your desired mode.
SOFT
Definition of Picture Settings
PERSONAL : Picture settings are set to your preference.
RICH
: Emphasize very vibrant colours.
(Suitable for AV mode in brightly-lit room)
NATURAL : Emphasize original colours.
SOFT : Emphasize “warm” colours. (Suitable for dimly-lit
room condition and gives cinema-like effect when
light is switched off)
Smart Sound
Smart Sound offers you a choice of 4 settings – THEATRE, MUSIC, VOICE and
PERSONAL.
SMART
SMART
±
`
0
THEATRE
MUSIC
MENU
SURF
➠
VOICE
• Press SMART (Sound) button repeatedly to cycle
through the 4 settings to select your desired mode.
PERSONAL
Definition of Sound Settings
THEATRE
: Emphasize sensation to action.
(Bass and Treble boosted)
MUSIC
VOICE
: Emphasize low tone. (Bass boosted)
: Emphasize high tone. (Treble boosted)
PERSONAL : Sound settings are set to your preference.
2 3
TELETEXT
If TV channel broadcast contains teletext information, each channel that broadcasts
teletext transmits a page (index page) with information on how to use the teletext system -
usually on page 100. The system transmitted is indicated in the option line at the bottom of
the screen
1
Switching On and Off – a
Select a TV channel on which teletext is
being transmitted. (Check with a TV
programme guide.)
2
•
Press the a button to switch on or off the
teletext display. Usually the list of contents
(index) is displayed on the screen.
A/CH
n
v
o
r
PIP UP PIP DOWN
p
2
5
8
0
1
3
6
2
Selecting a Teletext Page – DIGIT (0 - 9)
buttons
2
4
•
Press the digit button for the required teletext
page number (3 digits). The selected page
number is displayed at the top left hand corner
of the screen. The teletext page counter
searches until the selected page is located. If
the counter keeps searching, it means that the
page is not available for selection. If you make
a mistake in keying the page number, you
have to complete keying the 3 digit number
before re-keying the correct page number.
9
7
SMART
SMART
±
`
MENU
SURF
H
CH
A
3
4
Colour Buttons (Direct access to an item)
Colour zones are displayed at the bottom of
the screen. The 4 colour buttons are used
to access the items or their corresponding pages.
AV
m
h
\
4
f
3
b
y
1
5
8
7
HOLD – f
GAME
e
d
INCREDIBLE
`
A selected page number sometimes contains a
few sub-pages. The sub-page will automatically
rotate to the next sub-page after about 20
seconds. The total number of sub-pages are
indicated on the top right corner of the screen.
(e.g. 1/4)
INC. SURR.
6
4
•
•
Press the f button to hold a sub-page to
read the text at your own pace. A e symbol
`
appears at the top left corner of the
screen indicating that the page is on hold.
Press the f button to resume page rotation.
TELETEXT
2 4
5
REVEAL – e
Sometimes a teletext page contains
concealed information such as in a quiz or
puzzle.
Press the e button to reveal the concealed
information.
Press the e button again to hide the
concealed information.
2
A/CH
n
o
r
•
•
PIP UP PIP DOWN
p
v
2
5
8
0
1
3
6
2
4
6
•
ENLARGE – h
This enables you to enlarge the teletext page.
Press the h button to view the top half of the
teletext page.
Press the h button again to view the bottom
half of the teletext page.
9
7
SMART
SMART
±
`
•
MENU
SURF
•
Press the h button once more to return to
normal size teletext page.
7
8
INDEX – d
Allows you to return to the main index page
(generally page 100).
H
CH
A
AV
m
h
\
4
f
SUBCODE /TIME DISPLAY – y
By adding a subcode, you can call up a
sub-page and hold it.
3
b
y
Enter the teletext page number
1
5
8
GAME
(the teletext page must have sub-pages in it).
Press the y button and “– – – – “ is
displayed at the upper left hand corner.
Enter the subpage with 4 digits : e.g. 0003
for 3/4 (third of 4 pages).
Press the y button to cancel the subcode.
To display the time during normal viewing
(only applicable to those channels that is
broadcasting Teletext),
e
d
INCREDIBLE
`
7
•
•
•
INC. SURR.
6
4
•
Press the y button to switch on the time
display. The time is displayed on the top
right hand corner of the screen.
.
CONNECTING PERIPHERAL EQUIPMENT
2 5
Recording programmes from the TV to VCR
• Connect VIDEO out sockets of the TV to the Input sockets of VCR to record programmes.
To enhance the sound of your television, connect the AUDIO L and R sockets to an
external audio system instead of to the VCR. For mono equipment, connect only the
AUDIO L (left) socket.
S-VIDEO
VIDEO
V
L
L
AUDIO
R
R
in
in
out
AV1
AV2
Monitor
L
L
R
R
V
L
R
Back of VCR
video in
audio in
External audio system
Playback programmes from VCR/Laser disc player to the TV
• Connect the S-VIDEO Output socket (if available) of the VCR to the S-VIDEO in socket to
enhance the picture quality.
Note : You should not connect the VIDEO in socket of the TV if S-VIDEO in socket is used.
• Connect the Output sockets of the VCR/laser disc player to the AUDIO L and R in sockets
to playback programmes.
S-VIDEO
VIDEO
L
L
AUDIO
R
R
in
in
out
AV1
AV2
Monitor
Back of VCR
L
R
GENERAL INFORMATION/TIPS
Safety
2 6
Disconnect mains plug when :
– the RED light below the screen is flashing continuously and the TV cannot be
switched on.
– a bright white line is displayed across the screen.
– cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather.
– there is a lightning storm.
– the set is left unattended for an extended period of time.
Caution : Never attempt to repair a defective TV yourself. Always consult a skilled
service personnel.
Switch off your TV overnight via the POWER ON/OFF button instead of leaving it
on standby. You save energy and at the same time demagnetise the picture tube.
A demagnetised picture tube supports good picture quality. When the set is
switched on, do not shift, move or turn (e.g. on a swivel base) the set around
because an uneveness in colour in some parts of the screen may occur.This can be
eliminated by switching off the set by the mains power button . Wait for 20
minutes before switching on again. If symptom still exists, call service.
Before calling service
Symptom
Check/Action
Colour patch
(uneveness)
• Switch off TV by the mains power button. Wait for
20 minutes before switching on again.
No power
• Check TV's AC power cord is plugged into mains
socket. If there is still no power, disconnect plug.
Wait for 60 seconds and re-insert plug. Switch on
TV again.
No picture
• Check antenna connection at rear of the TV.
• Possible faulty TV station. Try another channel.
• Increase the contrast setting first and then the
brightness setting.
Good picture but no sound
• Try increasing the volume.
• Check whether sound is switched on.
Good sound but poor or
abnormal colour or no picture
• Increase the contrast setting first and then the
brightness setting.
Snowish picture and noise
Horizontal dotted lines
• Check antenna connection at rear of the TV.
• Possible electrical interference( e.g. hairdryer,
nearby neon lights, etc). Switch off equipment.
'Ghosts' or double image
• Possible poor positioning of antenna. Using a
highly directional antenna may improve reception.
TV not responding to remote • Check life span of batteries.
control handset • Aim remote control handset directly at remote
control sensor lens on the TV set.
SPECIFICATIONS
2 7
29PT5683
74 cm
Picture Tube Size
Picture Tube Visible Area
Audio Output
68 cm
2 x 5 W + 10 W
Set Dimensions
Length
Depth
76 cm
51 cm
59 cm
Height
Nett Weight of Set
40 kg
Version
56
69
x
PAL B / G
x
x
x
x
x
x
PAL I
x
SECAM BG / DK
PAL DK
x
x
PAL 60 Playback
NTSC Playback
x
x
Note
For Operating Voltage, Frequency, Power Consumption and Version Number, refer to
the type sticker at the rear of the set.
|