Color Television
27PT71B1
Instructions for use
This television contains;
3135 015 17521
SAFETY INSTRUCTIONS - Read before operating equipment
This product was designed and manufactured to meet strict quality and
safety standards. There are, however, some installation and operation pre-
cautions which you should be particularly aware of.
11. Power-Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords and plugs,
convenience receptacles, and the point where they exit from the
appliance.
1. Read Instructions - All the safety and operating instructions should
be read before the appliance is operated.
12. Cleaning - The appliance should be cleaned only as recommended
2. Retain Instructions - The safety and operating instructions should
by the manufacturer.
be retained for future reference.
13. Power Lines - An outdoor antenna should be located away from
3. Heed Warnings - All warnings on the appliance and in the operating
power lines.
instructions should be adhered to.
14. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to pro-
vide some protection against voltage surges and built up static
charges.
4. Follow Instructions - All operating and use instructions should be
followed.
5. Water and Moisture - The appliance should not be used near water
- for example, near a bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement or near a swimming pool, etc.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats
and supporting structure grounding of the lead-in wire to an anten-
na discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes and require-
ments for the grounding electrode. See Fig. below.
6. Carts and Stands - The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
6A.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven sur-
faces may cause the appliance and cart combination to
overturn.
15. Non-use Periods - The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry - Care should be taken so that objects do not
6B. Tilt/Stability - All televisions must comply with recommended inter-
national global safety standards for tilt and stability properties of its
cabinet design.
fall and liquids are not spilled into the enclosure through openings.
17. Damage Requiring Service - The appliance should be serviced by
•
Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
Also, do not endanger yourself, or children, by placing elec-
tronic equipment/toys on the top of the cabinet. Such items
could unsuspectingly fall from the top of the set and cause
product damage and/or personal injury.
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance;
or
•
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
7. Wall or Ceiling Mounting - The appliance should be mounted to a
E. The appliance has been dropped, or the enclosure damaged.
wall or ceiling only as recommended by the manufacturer.
18. Servicing - The user should not attempt to service the appliance
beyond that described in the operating instructions. All other servic-
ing should be referred to qualified service personnel.
8. Ventilation - The appliance should be situated so that its location or
position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or, placed in a built-
in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (includ-
ing amplifiers) that produce heat.
Note to the CATV system installer: This reminder is provided to call the
CATV system installer's attention to Article 820-40 of the NEC that pro-
vides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
10. Power Sources - The appliance should be connected to a power sup-
ply only of the type described in the operating instructions or as
marked on the appliance.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
TABLE OF CONTENTS
Introduction
Remote Control Operation
✧Welcome/Registration of Your TV . . . . . . . . . . . . . . . . .2
✧Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
✧Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
✧Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
✧ Remote Control – Using AutoPicture™ . . . . . . . .41
✧ Remote Control – Using AutoSound™ . . . . . . . .42
✧ Remote Control – Using Channel Surf . . . . . . . . . . . .43
The PIP (Picture-in-Picture) Feature
ONSCREEN MENU
✧ PIP – Basic Connections . . . . . . . . . . . . . . . . . .44
✧PIP – Selecting the Signal Source . . . . . . . . . . . . . . . .45
✧PIP – Remote Control Buttons . . . . . . . . . . . . . . . . . . .46
✧PIP – Adjusting the Color and Tint . . . . . . . . . . . . . . .47
✧PIP – More Connections . . . . . . . . . . . . . . . . . . . .48–49
Picture
✧ Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . .6
Features
✧Turning ON the Dynamic Noise Reduction
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
✧Turning ON the ImageMax™ Control . . . . . . . . . . . . . .8
✧Using the Closed Captioning Control . . . . . . . . . . . . . . .9
✧Using the Screen format Control . . . . . . . . . . . . . . . . .10
✧Activating the Blue Mute Control . . . . . . . . . . . . . . . .11
✧Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . .12
General Information
✧ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .50
✧Glossary of Television Terms . . . . . . . . . . . . . . . . . . . .51
✧Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
✧Factory Service Locations . . . . . . . . . . . . . . . . . . .53–54
✧Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
✧Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
12
The Timer Feature
1
11
7
2
10
9
3
8
4
5
6
✧ The Timer – Setting the Clock . . . . . . . . . . . . . .13
✧ The Timer – Setting the Start Time . . . . . . . . . . . . . .14
✧The Timer – Setting the Stop Time . . . . . . . . . . . . . . .15
✧The Timer – Selecting the Channel . . . . . . . . . . . . . . .16
✧The Timer – Selecting the Tuner . . . . . . . . . . . . . . . . .17
✧The Timer – Setting Activate to ON or OFF . . . . . . . .18
✧The Timer – Turning ON the Timer Display . . . . . . . .19
The AutoLockª Feature
✧ Understanding AutoLock™ . . . . . . . . . . . . . . . . . .20
✧AutoLock™ – Setting Up the Access Code . . . . . . . . .21
✧AutoLock™ – Blocking Channels . . . . . . . . . . . . . . . .22
✧AutoLock™ – Blocking by Movie Rating . . . . . . . . . .23
✧AutoLock™ – Blocking by TV Rating . . . . . . . . . . . .24
✧AutoLock™ – Turning Block ON or OFF . . . . . . . . . .25
✧AutoLock™ – Blocking Unrated
Broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
✧AutoLock™ – Blocking Broadcasts That
Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
✧AutoLock™ – Reviewing Your Settings . . . . . . . . . . .28
✧AutoLock™ – Viewing Blocked
NOTE: This owner's manual is used with several dif-
ferent television models. Not all features (and draw-
ings) discussed in this manual will necessarily match
those found with your television system. This is normal
and does not require that you contact your dealer or
request service.
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sound
✧ Sound – Adjusting the Treble, Bass, and
and Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
✧Sound – Setting the Volume . . . . . . . . . . . . . . . . . . . .31
✧Sound – Using the AVL (Audio Volume
Leveler) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
✧Sound – Using Incredible Surround . . . . . . . . . . . . . . .33
✧Sound – Setting the TV for Stereo and
SAP (Second Audio Program) . . . . . . . . . . . . . . . . . . .34
✧Sound – Setting the Audio Out Control . . . . . . . . . . . .35
✧Sound – Using the TV Speaker Control
and Audio Output Jacks . . . . . . . . . . . . . . . . . . . . . . . .36
✧Sound – Using the Surround Sound
External Speaker Connections . . . . . . . . . . . . . . . . . . .37
✧Sound – Using the Audio/Video
Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38–40
AutoChron, AutoLock, AutoPicture, AutoSound, M-Link, and
ImageMax are trademarks of Philips Consumer Electronics Company.
Copyright © 2000 Philips Consumer Electronics Company.
All rights reserved.
4
FEATURES
Audio/Video Jack Panel allows direct connections with VCRs, DVDs, or
other devices, providing quality TV picture and sound playback.
QUICK USE AND INSTALLATION GUIDE
Use the simple Quick Use and Installation
Audio Volume Leveler (AVL) Control keeps the TV sound at an even
level. Peaks and valleys that occur during program changes or commercial
breaks are reduced, making for a more consistent, comfortable sound.
Guide (supplied with your TV information
QUICK USE AND INSTALLATION GUIDE
packet) for details on:
TABLE OF CONTENTS
•
For details on product registration, warranty,
and service refer to the other literature included
with your TV information packet.
12
1
Getting Started
Warning/Precautions..................................1
Hooking Up Your TV.................................1
11
2
9
3
8
4
7
5
6
Please retain all these materials and keep them
handy for future reference.
Basic TV and Remote Control Operation .................2
How to Use the “INSTALL” Controls ..................3-4
Using the Language Control......................................3
Setting the TV to Auto Program Channels................3
W
ARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO RAIN
OR EXCESSIVE MOISTURE.
AutoChronª automatically sets the right time of day and maintains it
with digital precision through brownouts, power failures, and even
Daylight Savings Time adjustments.
Setting the TV for a Cable or Antenna Signal...........3
Using the Channel Edit Control ................................4
Setting the Channel Name Control............................4
How to use the AutoChron control............................4
NOTE: This Quick Use Guide may be used with
other models. Some of the features listed may or
may not apply to your TV.
• Cable/Antenna
Hookups
Color Television and Remote Control
ANTENNA OR
CABLE TV
BEGIN
SMART
Connect your Antenna or
Connect the twin Output
plugs on the Signal Splitter to
the ANT and PIP ANT
inputs on the rear of the TV
HELP
A
typical ANT(enna)
and PIP ANT connection
(using common signal source
Cable TV signal to the single
75 ohm input plug on the two-
way Signal Splitter (optional).
A
B
Remember,
A
B
ANT(ENNA)
A
&
B
INPUTS
a
be sure to set the
TV for the type sig-
nal you've connect-
ed (see "TUNER"
.
and an optional Signal Splitter):
our TV has two sepa-
Yrate ANT(enna)/Cable
inputs on the rear of the
set. These two signal inputs
offer convenient hook-up
options for both normal TV
program viewing and
Push the round connector end of
the RF Coaxial Cable onto the
ANT(enna) plug and screw it
down tight (if using threaded
cables).
If your Antenna or Cable TV
round cable con-
Then connect two lengths of RF
Coaxial Cable to the two Output
plugs on the two-way Signal
Splitter (F-type connector on
both ends).
signal has
a
nector (75 ohm) on the end,
then you're ready to connect it
to the 75ohm Signal Splitter.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
section on page
this Guide.)
3
of
Your TV can set
itself to select only
the channel numbers
on your Cable sys-
tem (see “Auto
Picture-In-Picture (PIP)
features.
to the screws on 300 to 75
a
ohm adapter before connecting
to the 75ohm Signal Splitter.
Combination VHF/UHF Antenna
The ANT(enna)
A
input is
Program" page 3). If
intended for use and view-
ing on the TV’s main
you use Cable
a
• Automatic Channel
Programming
Back of TV
Converter box, set
the TV to the same
channel as the con-
verter's CH 3/4
300 to 75Ω Adapter
AutoLockª allows you to block the viewing of certain channels or pro-
grams with certain ratings if you do not want your children to view inap-
propriate materials.
screen. Your home’s prima-
ry Antenna, or Cable TV
signal, should be connect-
ed to this input for normal
TV setup, use and feature
operation.
T
win Lead
Wire
O
R
switch (on the rear of
the converter.)
-
Outdoor or Indoor Antenna
-
receives normal broadcast channels
2-13 (VHF) and 14-69 (UHF).
To order accessories
l
Round Cable
• Channel Editing
Auto Programming scans (when activated) for all available channels
from regular antenna or cable signals and stores only active broadcast sta-
tions in the TVÕs memory.
• Setting the TV’s Clock Automatically
(AutoChron™)
AutoPictureª allows you to change the picture settings (color, tint, con-
trast, etc.) for various types of programming, such as sports, movies, multi-
media (games), or weak signals with the push of one button.
• Basic Operation of the TV and Remote
Control
AutoSoundª allows you to select from three factory-set controls and a
personal control that you set according to your own preferences through
the onscreen Sound menu. The three factory-set controls (Voice, Music,
and Theatre) enable you to tailor the TV sound so as to enhance the partic-
ular programming you are watching.
• Selection of the Onscreen Menu Language
M-LINK INSTRUCTIONS FOR USE
Use the simple M-Link Instructions for Use
(supplied with your TV information packet)
for details on:
Channel Edit allows you to add or delete channels from the list stored in
the TVÕs memory. Channel Edit makes it easy to limit or expand the num-
ber of channels that are available to you when you press the Channel (+) or
(Ð) buttons on your remote control.
• Operating Accessory
Closed Captioning allows the viewer to read TV program dialogue or
voice conversations as onscreen text.
Instructions for use
Devices (VCR, DVD, Cable
Box, and Others)
ImageMaxª helps you sharpen the picture quality by making dark por-
tions of the picture darker and light portions brighter.
• Automatic Programming Via
the TV Remote Control
Infrared Remote Control works your TV and other remote-controlled
devices, such as VCRs, DVD players, cable converters, and satellite
receivers.
3135 015 XXXXX
• Setting Up Personal
Commands
Infrared Remote (IR) Blaster works with the M-Link feature to enable
your TV to ÒlearnÓ the remote-control commands of new Philips devices
or multibrand devices that you have connected to your TV. After the com-
mands are learned, you can use your TV remote control to operate and
control all of the devices.
• Inputing Commands from the Remote
Controls of Your Accessory Devices
M-Linkª allows you to convert your TV into a home-cinema control
center composed of up to six devices (including an audio amplifier). You
activate the devices by pressing macro buttons and control the devices by
pressing ÒhotÓ buttons on your remote control. Choose from cable box,
digital set top box, DVD (digital video disc), laser disc (LD), satellite digi-
tal TV, VCD (video compact disc), and VCR (video cassette recorder)
devices. (The IR Blaster must be plugged in before turning ON the TV.)
END-OF-LIFE DISPOSAL
Your new television and its packing contain
materials that can be recycled and reused.
Specialized companies can recycle your
product to increase the amount of reusable
materials and minimize the amounts that
need to be properly disposed.
Onscreen Menu shows helpful messages and instructions for setting TV
feature controls (can be viewed in English, French, or Spanish).
Sleep Timer automatically turns the TV OFF after a set amount of time
that you choose.
Your product also uses batteries that should
not be thrown away when depleted, but
should be handed in and disposed of as
small chemical waste.
Standard Broadcast (VHF/UHF) or Cable TV (CATV) channel capabil-
ity allows for viewing by antenna or cable.
Stereo capability, including a built-in audio amplifier and twin-speaker
system, allows for the reception of TV programs broadcast in stereo sound.
When you replace your existing equipment,
please find out about the local regulations
regarding disposal of your old television,
batteries, and packing materials.
Surf Button allows you to easily switch among only the channels that are
of interest to you (the ones that you have programmed into the TVÕs Surf
control through the onscreen menu).
Timer allows you to set your TV to turn itself ON and OFF once or daily
like an alarm clock.
5
ADJUSTING THE PICTURE
o adjust your TV picture controls,
Tselect a channel and follow these
steps.
BEGIN
Press the MENU button on the
remote control to show the onscreen
menu. PICTURE will be highlighted.
Press the CURSOR RIGHT button
and the menu will shift to the left.
BRIGHTNESS will be highlighted and an
adjustment bar will be shown to the right.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
PICTURE
BRIGHTNESS
COLOR
Use the CURSOR LEFT or CUR-
SOR RIGHT button to adjust the
BRIGHTNESS level of the picture.
30
PICTURE
SHARPNESS
After adjusting the BRIGHTNESS
control, press the CURSOR DOWN
button to select another picture adjust-
ment: COLOR, PICTURE, SHARP-
NESS, TINT, OR COLOR TEMP.
Press the CURSOR LEFT or CUR-
SOR RIGHT button to adjust the
selected control.
PICTURE
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
30
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
PICTURE
SWAP
SOURCE
PIP CH
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
UP
DN
NOTE: The menu will show only five
items at a time, so you will need to con-
tinue scrolling with the CURSOR
DOWN button to adjust the TINT and
COLOR TEMP.
30
PICTURE
1
SOUND
PICTURE
M LINK
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
3
Press the STATUS/EXIT button to
remove the menu from the screen.
2
MENU
30
PICTURE
CH
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
VOL
MUTE
4
Remember, when the bar scale is cen-
SOURCE STATUS/EXIT
CC
CLOCK
tered
, the control set-
0
ITR/REC
HOME
VIDEO
RSONAL
tings are at normal, mid-range levels.
Picture adjustments are described here.
5
MOVIES
PICTURE
INCR. SURR.
SURF
BRIGHTNESS Ð adds or subtracts
light from the darkest part of the pic-
ture.
COLOR
PICTURE
SHARPNESS
TINT
COLOR TEMP NORMAL
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
COLOR Ð adds or eliminates color.
PICTURE Ð improves the detail of the
lightest parts of the picture.
OR
COLOR TEMP WARM
OR
SHARPNESS Ð improves the detail in
the picture.
COLOR TEMP COOL
TINT Ð adjusts the picture to obtain
natural skin tones.
COLOR TEMP offers NORMAL,
COOL, or WARM picture preferences.
NORMAL Ð keeps whites, white.
COOL Ð makes whites, bluish.
WARM Ð makes whites, reddish.
6
TURNING ON THE DYNAMIC NOISE REDUCTION CONTROL
ue to many reasons, such as
Dpoor cable reception, the pic-
ture can sometimes appear slightly
ÒspeckledÓ (an indication of signal
noise in the picture). The DNR
(Dynamic Noise Reduction) control
can help eliminate this type of
interference and improve the quali-
ty of the picture.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
BEGIN
PICTURE
BRIGHTNESS
COLOR
Press the MENU button on
the remote to show the onscreen
menu. PICTURE will be highlight-
ed.
30
PICTURE
SHARPNESS
TINT
Press the CURSOR RIGHT
button and the menu will shift to
the left. BRIGHTNESS will be
highlighted.
PICTURE
PICTURE
SHARPNESS
TINT
COLOR TEMP
DNR
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the CURSOR DOWN
button repeatedly until the DNR
control is highlighted.
ON
SWAP
SOURCE
PIP CH
UP
DN
Press the CURSOR RIGHT
button to switch DNR ON or press
the CURSOR LEFT button to
switch DNR OFF.
OR
DNR
OFF
1
SOUND
PICTURE
M LINK
4
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
2
MENU
VOL
CH
MUTE
3
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
5
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
7
TURNING ON THE IMAGEMAX™ CONTROL
mageMaxª helps you sharpen
Ithe picture quality by making
dark portions of the picture darker
and light portions of the picture
brighter. Follow these steps to turn
ImageMaxª ON.
BEGIN
Press the MENU button on
the remote control to show the
onscreen menu. PICTURE will be
highlighted.
PICTURE
SOUND
FEATURES
INSTALL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
TINT
PICTURE
BRIGHTNESS
COLOR
30
Press the CURSOR RIGHT
button and the menu will shift to
the left. BRIGHTNESS will be
highlighted.
PICTURE
SHARPNESS
TINT
PICTURE
Press the CURSOR DOWN
button repeatedly until the IMAGE-
MAX control is highlighted.
POWER
SHARPNESS
TINT
COLOR TEMP
DNR
IMAGEMAX
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
ON
ON
Press the CURSOR RIGHT
button to switch between ON and
OFF.
SWAP
SOURCE
PIP CH
UP
DN
OR
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
IMAGEMAX
OFF
1
SOUND
PICTURE
M LINK
4
2
MENU
VOL
CH
MUTE
3
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
5
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
8
USING THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows
Cyou to read the voice content of
television programs on the TV
screen. Designed to help the hear-
ing impaired, this feature uses
onscreen Òtext boxesÓ to show dia-
logue and conversations while the
TV program is in progress.
NOTE: Not all TV programs and product commercials are broadcast with Closed
Captioning (CC). Nor are all Closed Captioning MODEs (CAPTION 1Ð4 or TEXT
1Ð4) necessarily being used by broadcast stations during the transmission of a pro-
gram offering Closed Captioning. Refer to your areaÕs TV program listings for the
stations and times of shows being broadcast with Closed Captioning.
BEGIN
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU button on
the remote control to show the on-
screen menu.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
Press the CURSOR RIGHT
button and the menu will shift to
the left.
FEATURES
TIMER
AutoLock
PIP
CAPTION MPDE
CC DISPLAY
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
CLOSED CAP
FORMAT
TV/VCR
A/CH
Press the CURSOR DOWN
button repeatedly until the
CLOSED CAP control is highlight-
ed.
SWAP
SOURCE
PIP CH
UP
DN
FEATURES
CLOSED CAP
CC1
CC2
CC3
CAPTION MODE
CC DISPLAY
Press the CURSOR RIGHT
button again. The menu will shift
to the left and CAPTION MODE
will be highlighted. Then press the
CURSOR RIGHT button to high-
light CAPTION MODEs.
1
SOUND
PICTUR
M LINK
6
FEATURES
CLOSED CAP
5
3
CAPTION MODE
CC DISPLAY
CC1
CC2
CC3
MENU
Press the CURSOR UP or
CURSOR DOWN button to
VOL
CH
MUTE
CC1
CC2
CC3
CC4
CC MUTE
TXT1
TXT2
TXT3
TXT4
select a CAPTION MODE: CC1,
CC2, CC3, CC4, CMUTE, TXT1,
TXT2, TXT3, or TXT4. CC DIS-
PLAY turns text OFF or ON if the
TV station broadcasting on the
channel is making CLOSED CAP-
TIONING available. With CC DIS-
PLAY highlighted, press the CUR-
SOR RIGHT button to toggle
2
SOURCE STATUS/EXIT
CC
CLOCK
4
NOTE: The CC MUTE
ITR/REC
HOME
VIDEO
HOME PERSONAL
VIES
option can be used to set the
TV to turn the CLOSED
CAPTIONING mode ON
whenever the MUTE button
is pressed.
INCR. SURR.
F
7
PROGRAM LIST OPEN/CLOSE
TUNER A/B
OK
You can press the CC
button on the remote
control to turn the CC
text ON or OFF.
Closed Captioning ON or OFF.
NOTE: You also can press the CC
button on the remote control to turn
the CC TEXT option ON or OFF.
TEXT Mode Example Display -
The TV screen will be
CAPTION Mode
Example Display
blocked from viewing.
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
CLOSE CAPTION PROGRAMS ON WXYZ
ALL ITEMS ARE EASTERN STANDARD TIME (EST)
CHECK LOCAL LISTINGS
FOR TIMES IN YOUR AREA
6:00 TOP OF THE MORNING
10:00 THE BEST LITTLE CALL-IN SHOW EVER
12:00 NOONDAY NEWS
1:30 AS YOUR LIFE TURNS MY WORLD AROUND
6:00 WORLD NEWS FOR TODAY
9:00 PLAYHOUSE MOVIE OF THE WEEK
JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
9
SELECTING THE SCREEN FORMAT SIZE
ou can change the screen for-
Ymat size to match the type of
program youÕre watching. Select
the normal 4:3 aspect ratio or
expand the 4:3 aspect ratio to com-
pletely fill the screen. There also is
a compressed 16:9 aspect ratio,
which allows movies to be viewed
in their full width (known as letter-
box style).
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU button on
the remote control to show the on-
screen menu.
POWER
SLEEP
FEATURES
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
PIP
ON/OFF POSITION FREEZE
AutoLock
PIP
CLOSED CAP
BLUE MUTE
FORMAT
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
UP
DN
4:3
Press the CURSOR RIGHT
button and the menu will shift to
the left.
OR
OR
1
SOUND
PICTURE
M LINK
Press the CURSOR DOWN
button repeatedly until the FOR-
MAT control is highlighted.
FORMAT
FORMAT
EXPAND 4:3
COMPRESS 16:9
5
MENU
3
Press the CURSOR RIGHT
button repeatedly to toggle among
the three screen format sizes Ð 4:3,
EXPAND 4:3, or COMPRESS
16:9.
VOL
CH
MUTE
2
OURCE STATUS/EXIT
CC
CLOCK
4
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
ITR/REC
HOME
VIDEO
HOME PERSONAL
OVIES
INCR. SURR.
F
6
PROGRAM LIST OPEN/CLOSE
TUNER A/B
OK
SMART HELP
Without the onscreen
menu display showing, you
also can press the CURSOR UP or
CURSOR DOWN button on the
remote control to toggle among the
screen sizes 4:3, Expand 4:3, or
Compress 16:9.
FORMAT
4:3
FORMAT
EXPAND 4:3
FORMAT
COMPRESS 16:9
10
ACTIVATING THE BLUE MUTE CONTROL
he Blue Mute feature will elimi-
Tnate annoying snow from the
screen when no video signal is pres-
ent by displaying a pleasent blue
screen. This occurs in cases such as
when a VCR tape is removed or an
antenna signal is broken. To turn the
Blue Mute feature ON or OFF, fol-
low the steps below.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU button on
the remote control to show the on-
screen menu.
FEATURES
POWER
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
SLEEP
AutoLock
PIP
CLOSED CAP
FORMAT
BLUE MUTE
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
OFF
Press the CURSOR RIGHT
button and the menu will shift to
the left.
UP
DN
OR
Press the CURSOR DOWN
button repeatedly until the BLUE
MUTE control is highlighted.
1
SOUND
PICTURE
M LINK
FEATURES
5
AutoLock
PIP
CLOSED CAP
FORMAT
BLUE MUTE
MENU
3
Press the CURSOR RIGHT
button repeatedly to toggle the
Blue Mute option ON or OFF.
ON
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
VOL
CH
MUTE
2
BLUE MUTE OFF
-with no video signal; screen
is snowing looking.
OURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDE
HOME PERSONAL
VIES
INCR. SURR.
6
PROGRAM LIST OPEN/CLOSE
TUNER A/B
OK
BLUE MUTE ON
-with no video signal; screen is
a pleasent blue color.
11
USING THE SLEEP TIMER
ave you ever fallen asleep in
Hfront of the TV, only to have it
wake you up at two in the morning
with a test pattern sound screeching
in your ears? Well, your TV can
enable you to avoid that discomfort
by automatically turning itself off.
With the Sleep Timer feature, you
can set a timer to automaticaly
swtich the TV OFF after a period
of time you choose (15-minute
increments up to 60 minutes, then
30-minute increments up to 90 min-
utes, then 60-minute increments up
to 240 minutes).
SLEEP OFF
15 MIN
2
1
POWER
SLEEP
PIP
TV/VCR
A/CH
ON/OFF POSITION FREEZE
30 MIN
BEGIN
SWAP
SOURCE
PIP CH
UP
DN
Press the SLEEP button on
the remote control. The SLEEP
timer onscreen display will appear
in the upper part of the screen.
45 MIN
SOUND
PICTURE
M LINK
Within five seconds, press the
SLEEP button repeatedly to pick
the amount of time (15-minute
increments up to 60 minutes, then
30-minute increments up to 90 min-
utes, then 60-minute increments up
to 240 minutes) before the TV will
turn itself off.
MENU
60 MIN
VOL
CH
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
An onscreen countdown will appear
during the last minute before the
TV shuts itself off.
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
90 MIN
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SMART HELP
To see how many min-
utes remain before the TV
shuts itself off, press the STA-
TUS/EXIT button.
120 MIN
During the last minute of a
SLEEP timer setting, an onscreen
countdown will be displayed.
During the last 10 seconds of a
SLEEP timer setting, an onscreen
display will read GOOD BYE.
180 MIN
50 SEC
240 MIN
GOOD BYE
12
THE TIMER – SETTING THE CLOCK
our television comes with an on-
Yscreen clock. During normal oper-
ation, the clock appears on the screen
when the STATUS/EXIT button is
pressed or if the TIMER DISPLAY
control is turned ON.
BEGIN
Press the MENU button on the
remote control to show the onscreen
menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIMER
TIME
Press the CURSOR DOWN but-
ton twice to highlight FEATURES.
AutoLock
PIP
START TIME
STOP TIME
CHANNEL
TUNER MODE
CLOSED CAP
FORMAT
Press the CURSOR RIGHT but-
ton and the menu will shift to the left.
TIMER will be highlighted.
FEATURES
TIMER
With TIMER selected, press the
CURSOR RIGHT button again to
shift the display left and highlight the
TIME control.
TIME
_ _:_ _ AM
POWER
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
TUNER MODE
SWAP
SOURCE
PIP CH
7
Press the CURSOR RIGHT but-
ton again to highlight the time indica-
tor area.
UP
DN
FEATURES
TIMER
Press the CURSOR LEFT or
CURSOR RIGHT button to select
the position or digit you wish to enter.
TIME
10:30 AM
9
START TIME
STOP TIME
CHANNEL
TUNER MODE
1
SOUND
PICTUR
M LINK
7
5
6
4
8
Press the CURSOR UP or CUR-
SOR DOWN button to select the
digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
3
MENU
6
VOL
CH
Press the CURSOR RIGHT but-
ton to move to the AM or PM posi-
tion.
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
7
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
Press the CURSOR UP or
DOWN button to set AM or PM.
9
11
10
NOTE: The TIME (Clock) fea-
10 Press the STATUS/EXIT button
INCR. SURR.
SURF
ture can be accessed directly by
pressing the CLOCK button on the
remote control, and then by simply
following steps 5 through 10 to
complete the task.
to remove the menu from the screen.
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SMART HELP
CH
MUTE
Remember, be sure to press
0 first and then the hour num-
ber for single-digit entries.
FEATURES
TIMER
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
TIME
_ _:_ _ AM
START TIME
STOP TIME
CHANNEL
TUNER MODE
11
The Clock also can be set automati-
cally using the AutoChronTM feature
found on page 4 of the Quick Use
and Installation Guide that came
with your television.
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
The TVÕs clock settings may be lost
when the TV is unplugged (or when
AC power to the set is interrupted).
13
THE TIMER – SETTING THE START TIME
ust as you would an alarm clock,
Jyou can set the TV to turn itself
ON once or at the same time every
day. Follow these steps to set the
Start Time.
BEGIN
Press the MENU button on the
remote control to show the
onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlighted.
FEATURES
TIMER
Press the CURSOR RIGHT
button again to shift the display
left. Then press the CURSOR
DOWN button once to highlight
the START TIME control.
POWER
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
TUNER MODE
SWAP
SOURCE
PIP CH
7
UP
DN
Press the CURSOR RIGHT
button again to highlight the time
indicator area.
FEATURES
TIMER
TIME
9
START TIME
STOP TIME
CHANNEL
TUNER MODE
_ _:_ _ AM
1
Press the CURSOR RIGHT
or CURSOR LEFT button to
move among the positions where
the time is input.
SOUND
PICTUR
M LINK
7
5
6
8
4
3
MENU
FEATURES
TIMER
Press the CURSOR UP or
CURSOR DOWN button to select
the digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
10:30 AM
6
VOL
CH
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
9
Press the CURSOR RIGHT
button to move to the AM or PM
position.
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
7
10
INCR. SURR.
SURF
Press the CURSOR UP or
DOWN button to set AM or PM.
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the STATUS/EXIT but-
ton to remove the menu from the
10
screen.
14
THE TIMER – SETTING THE STOP TIME
se the START TIME control to
Uset the TV to turn itself ON
once or at the same time every day
(see page 14 for details). The fol-
lowing steps will guide you in set-
ting the TV to turn itself OFF once
or at the same time every day.
BEGIN
Press the MENU button on the
remote control to show the on-
screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlight-
ed.
FEATURES
TIMER
POWER
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
Press the CURSOR RIGHT
button again to shift the display
left. Then press the CURSOR
DOWN button once twice to high-
light the STOP TIME control.
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
TUNER MODE
7
UP
DN
FEATURES
TIMER
TIME
Press the CURSOR RIGHT
button again to highlight the time
indicator area.
9
START TIME
STOP TIME
CHANNEL
TUNER MODE
1
SOUND
PICTUR
M LINK
7
5
6
_ _:_ _ AM
4
8
3
MENU
Press the CURSOR RIGHT
or CURSOR LEFT button to
move among the positions where
the time is input.
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
6
VOL
CH
Press the CURSOR UP or
CURSOR DOWN button to select
the digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
10:30 AM
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
9
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
7
10
Press the CURSOR RIGHT
button to move to the AM or PM
position.
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the CURSOR UP or
DOWN button to set AM or PM.
Press the STATUS/EXIT but-
ton to remove the menu from the
10
screen.
15
THE TIMER – SELECTING THE CHANNEL
ou can select a specific channel
Ythat the television will tune to
when the timer turns the set ON.
Follow these steps to select the
channel.
BEGIN
Press the MENU button on the
remote control to show the
onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlighted.
FEATURES
TIMER
Press the CURSOR RIGHT
button again to shift the menu to
the left. Then press the CURSOR
DOWN button repeatedly until the
CHANNEL control is highlighted.
POWER
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
TUNER MODE
SWAP
SOURCE
PIP CH
6
UP
DN
Press the CURSOR RIGHT
button again to highlight the chan-
nel indicator area.
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
1
Press the NUMBERED but-
tons to enter the desired start-up
channel. Or, press the CURSOR
RIGHT button repeatedly to enter
the start-up channel you want.
SOUND
PICTURE
M-LINK
5
6
12
4
3
MENU
FEATURES
TIMER
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
10:30 AM
12
VOL
CH
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
7
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
16
THE TIMER – SELECTING THE TUNER
hrough the START TIME fea-
Tture, you can select either
TUNER A or TUNER B to be the
main signal source when the TV is
powered ON.
BEGIN
Press the MENU button on
the remote control to show the on-
screen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlight-
ed.
FEATURES
TIMER
Press the CURSOR RIGHT
button again to shift the menu to
the left. Then press the CURSOR
DOWN button repeatedly until the
TUNER MODE control is high-
lighted.
POWER
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
TUNER MODE
UP
DN
FEATURES
TIMER
Press the CURSOR LEFT or
CURSOR RIGHT button to select
A or B.
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
10:30 AM
A
1
SOUND
PICTURE
M LINK
5
4
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
3
MENU
OR
TUNER MODE
B
5
VOL
CH
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
17
THE TIMER – SETTING ACTIVATE TO ON OR OFF
fter you have set the Time, Start
ATime, Stop Time, and Start
Channel, the timer must be set to
come on ONCE or DAILY, or
turned OFF through the ACTIVATE
control.
BEGIN
Press the MENU button on the
remote control to show the
onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlight-
ed.
FEATURES
TIMER
POWER
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
Press the CURSOR RIGHT
button again to shift the display to
the left. Then press the CURSOR
DOWN button repeatedly until the
ACTIVATE control is highlighted.
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
TUNER MODE
UP
DN
FEATURES
TIMER
START TIME
STOP TIME
CHANNEL
TUNER MODE
ACTIVATE
Press the CURSOR RIGHT
button again to set ACTIVATE to
ONCE; press the CURSOR
RIGHT button again for DAILY;
and press the CURSOR RIGHT
button again to toggle ACTIVATE
to OFF.
1
SOUND
PICTURE
M LINK
5
4
OFF
3
MENU
OR
ACTIVATE
ONCE
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
VOL
CH
MUTE
OR
2
SOURCE STATUS/EXIT
CC
CLOCK
ACTIVATE
DAILY
4
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
INCR. SURR.
SURF
SMART HELP
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Remember, before set-
ting the TIMER controls,
the TVÕs clock must be set to the
correct time manually (see page
13) or by using the AutoChronª
feature described on page 4 of the
Quick Use and Installation Guide.
Try it! After following the steps on
pages 13Ð18, use your TV as an
alarm clock.
18
THE TIMER – TURNING ON THE TIMER DISPLAY
fter the TVÕs clock has been set,
Ayou can use your TV as a clock.
The TIMER DISPLAY control
allows you to permanently display
the time in the upper right corner
of the screen.
BEGIN
Press the MENU button on
the remote to show the onscreen
menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left. TIMER will be highlighted.
FEATURES
TIMER
POWER
Press the CURSOR RIGHT
button again to shift the menu left.
Then press the CURSOR DOWN
button repeatedly until the DIS-
PLAY control is highlighted.
TIME
_ _:_ _ AM
SLEEP
START TIME
STOP TIME
CHANNEL
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
TUNER MODE
SWAP
SOURCE
PIP CH
UP
DN
Press the CURSOR RIGHT
or CURSOR LEFT button to turn
the TIMER DISPLAY ON or OFF.
FEATURES
TIMER
STOP TIME
1
CHANNEL
TUNER MODE
ACTIVATE
SOUND
PICTURE
M LINK
5
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
4
3
MENU
DISPLAY
ON
OR
DISPLAY
OFF
VOL
CH
MUTE
2
SMART HELP
SOURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
Remember, be sure you
have set the TVÕs clock with
the correct current time. (Refer to
page 13 to set the clock manually
or page 4 of the Quick Use and
Installation Guide to set the clock
automatically using the
6
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
AutoChronª feature.)
19
UNDERSTANDING AUTOLOCK™
he AutoLock™ feature receives
Tand processes data sent by
broadcasters or other program
providers that contain program con-
tent advisories. When programmed
by the viewer, a TV with AutoLock™
can respond to the content advisories
and block program content that may
be found objectionable (such as
offensive language, violence, sexual
situations, etc.). This is a great fea-
ture to censor the type of program-
ming children may watch.
AutoLock
MOVIE RATING
AutoLock
TV RATING
G
PG
PG-13
R
NC-17
ON
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
ON
In the AutoLock™ section, you’ll
learn how to block channels and pro-
gramming that is not rated, is unrat-
ed, or has no rating. You will also
find out how to turn these blocking
features ON or OFF. Following are
brief explanations of some terms and
ratings related to the AutoLock™
feature.
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G: General Audience - All ages admitted.
Most parents would find this program-
ming suitable for all ages. This type of
programming contains little or no vio-
lence, no strong language, and little or no
sexual dialogue or sexual situations.
TV-Y: (All children -- This program
TV
is designed to be appropriate for all
Y children.) Designed for a very young
AutoLock™ offers various
Blocking Options from which to
choose:
audience, including children ages 2-6. This
type of programming is not expected to
frighten younger children.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
BLOCKING: The BLOCKING con-
trol is what can be thought of as the
Òmaster switchÓ for AutoLockª.
This control affects the settings you
have chosen for blocking programs
according to movie ratings or TV
ratings, or for blocking programs
that have no rating or are unrated.
When the BLOCKING control is
OFF, the blocking or censoring of
programs is disabled. When the
BLOCKING control is ON, blocking
will occur according to the settings
you have chosen.
TV-Y7: (Directed to Older
TV
Children -- This program is designed
Y7 for children ages 7 and above.) It
may be more appropriate for children who
have acquired the development skills needed
to distinguish between make-believe and
reality. This programming may include mild
fantasy and comic violence (FV).
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the
following: violence, sexual situations,
coarse language, or suggestive dialogue.
TV-G: (General Audience -- Most
TV
parents would find this program suit-
Gable for all ages.) This type of pro-
gramming contains little or no violence, no
strong language, and little or no sexual dia-
logue or sexual situations.
BLOCK UNRATED: ALL unrated
programs will be blocked if this fea-
ture is set to ON.
R: Restricted -This programming is specifi-
cally designed for adults. Anyone under the
age of 17 should view this programming
only with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence; intense sexual sit-
uations; strong, coarse language; or intense-
ly suggestive dialogue.
TV-PG: (Parental Guidance
TV
Suggested -- This program contains
UNRATED programming is encoded
with information from the MPAA
(Motion Picture Association of
America) or TV broadcasters, but it
does not have a specific rating. In
other words, the MPAA or the TV
broadcasters have chosen not to
assign a rating to the programming.
PG
material that parents may find unsuit-
able for younger children.) This type of pro-
gramming contains one or more of the fol-
lowing: Moderate violence (V), some sexual
situations (S), infrequent coarse language
(L), or some suggestive dialogue (D).
NC-17: No one under the age of 17 will be
admitted. - This type of programming
should be viewed by adults only. It contains
graphic violence; explicit sex; or crude,
indecent language.
TV-14: (Parents Strongly
TV
Cautioned -- This program contains
NO RATING: ALL programming
with no content advisory data can be
blocked if NO RATING is set to
ON.
14 some material that many parents
would find unsuitable for children under 14
years of age.) This type of programming
contains one or more of the following:
intense violence (V); intense sexual situa-
tions (S); strong, coarse language (L); or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit
or indecent sexual acts, very coarse and
intensely suggestive language.
Programming that has No Rating is
not encoded with any rating infor-
mation from the MPAA or the
Parental Guidelines. Any program-
ming could fall into this category.
TV-MA: (Mature Audience Only --
TV
This program is specifically designed
MA
You also can block individual
channels or block programming
based on ratings of the MPAA and
TV broadcasters. (See a description
of the ratings on this page.)
to be viewed by adults and therefore
may be unsuitable for children under 17.)
This type of programming contains one or
more of the following: graphic violence (V);
explicit sexual situations (S); or crude, inde-
cent language (L).
20
AUTOLOCK™ – SETTING UP THE ACCESS CODE
utoLockTM allows parents to
Ablock out or ÒcensorÓ any
channels they think children should
not watch. A channel blocked by
the AutoLockTM control cannot be
viewed until a correct access code
is used to unlock the channel for
viewing. First, letÕs set your
AutoLock access code.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
NOTE TO PARENTS:
It isnÕt possible for
your child to unblock a
channel without know-
ing your access code or
changing it to a new
one. If your code has
been changed without
your knowledge, then
you will become aware
that blocked channels
may have been viewed.
BEGIN
FEATURES
TIMER
Press the MENU button on
the remote control to show the
onscreen menu.
ACCESS CODE
- - - -
POWER
SLEEP
AutoLock
PIP
CLOSED CAP
FORMAT
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
UP
DN
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
8
6
7
4
FEATURES
TIMER
ACCESS CODE
- - - -
5
AutoLock
PIP
1
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
SOUND
E
M LINK
CLOSED CAP
FORMAT
3
MENU
FEATURES
Press the CURSOR RIGHT
button to highlight ACCESS
CODE.
VOL
CH
MUTE
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
3
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
Press 0,7,1,1 on the remote
control. INCORRECT will appear
on the screen.
9
INCR. SURR.
SURF
GRAM
FEATURES
TIMER
FEATURES
TIMER
FEATURES
TIMER
Press 0,7,1,1 on the remote con-
trol again. ENTER NEW CODE
will appear on the screen.
OK
ACCESS CODE
X X X X
INCORRECT
ACCESS CODE
- - - -
ACCESS CODE
X X X X
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
Enter a new four-digit code
using the number buttons. CON-
FIRM CODE will appear on the
screen.
Enter your new four-digit
code again. CORRECT will flash
on the screen briefly and the high-
light bar goes back to AutoLock.
FEATURES
TIMER
FEATURES
TIMER
FEATURES
CONFIRM
CODE
- - - -
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ENTER
NEW CODE
- - - -
ENTER
NEW CODE
X X X X
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
FEATURES
TIMER
FEATURES
TIMER
FEATURES
TIMER
CONFIRM
CODE
X X X X
CONFIRM
CODE
X X X X
CORRECT
ACCESS CODE
- - - -
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
AutoLock
PIP
CLOSED CAP
FORMAT
Remember that 0711 is the default
AutoLockTM code. If your access code has
been changed by someone other than you
(a child, for example) or you have forgot-
ten the code, you can always get in by
inputting the default code.
21
AUTOLOCK™ – BLOCKING CHANNELS
fter your personal access code
Ahas been set (see the previous
page), you are ready to select the
channels or inputs you want to
block out or censor.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
AutoLock
PIP
TIME
BEGIN
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU button on
the remote control to show the
onscreen menu.
CLOSED CAP
FORMAT
NOTE: Blocked
channels will be
skipped when you
press the Channel
+/Ð buttons. To
view a blocked
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
ACCESS CODE
- - - -
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
5
SWAP
SOURCE
PIP CH
channel, refer to
page 28 for details.
UP
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLockª control.
FEATURES
TIMER
AutoLock
PIP
ACCESS CODE
- - - -
8
4
1
SOUND
PICTUR
M LINK
7
6
CLOSED CAP
FORMAT
3
MENU
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
VOL
CH
Enter your four-digit
MUTE
ACCESS CODE
X X X X
2
ACCESS CODE. CORRECT will
flash very briefly and the menu will
move to the left with BLOCK
CHANNEL highlighted.
SOURCE STATUS/EXIT
CC
CLOCK
3
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
7
9
INCR. SURR.
SURF
Press the CURSOR RIGHT
button to highlight the TVÕs avail-
able channels.
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
FEATURES
AutoLock
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Press the CURSOR UP or
CURSOR DOWN button to high-
light the channel you want to block.
2
Press the CURSOR RIGHT
button to block the channel. A
padlock image appears to the right
of the channel number.
FEATURES
AutoLock
FEATURES
AutoLock
FEATURES
AutoLock
BLOCK CHANNEL
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
AV2
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
AV2
12
13
14
15
16
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
AV3
ALL
1
Repeat steps 7 and 8 for any chan-
nels you want to block from view-
ing.
2
2
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
FEATURES
AutoLock
If a channel is blocked by the
BLOCK CHANNEL option, the
TV will display the screen shown
to the right. To watch the channel,
enter your access code or change
the BLOCK CHANNEL option
back to off.
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Channel 12
12
13
14
15
16
Blocked by AutoLock
TV rating TV-PG
Access Code
- - - -
NOTE: You also can block out the use of the A/V external inputs on the rear of the TV. This stops the viewing of VCR, DVD, and other sources that can be
shown through the A/V input jacks. Select AV1, AV2, or AV3 and then select BLOCK.
22
AUTOLOCK™ – BLOCKING BY MOVIE RATING
fter your personal access code
Ahas been set (see page 21), you
can select specific movie ratings
that you want to censor.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
BEGIN
FEATURES
TIMER
TIME
Press the MENU button on
the remote control to show the
onscreen menu.
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
ACCESS CODE
- - - -
POWER
SLEEP
AutoLock
PIP
CLOSED CAP
FORMAT
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
5
SWAP
SOURCE
PIP CH
UP
FEATURES
TIMER
ACCESS CODE
- - - -
AutoLock
PIP
8
4
1
SOUND
PICTUR
M LINK
8
7
Press the CURSOR RIGHT
button again to highlight
ACCESS CODE.
CLOSED CAP
FORMAT
3
MENU
Enter your four-digit
ACCESS CODE. CORRECT will
flash very briefly in red and the
menu will move to the left with
BLOCK CHANNEL highlighted.
FEATURES
VOL
CH
MUTE
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
3
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
6
Press the CURSOR DOWN
button repeatedly until MOVIE
RATING is highlighted.
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
FEATURES
AutoLock
BLOCK CHANNEL
Press the CURSOR RIGHT
button and the Rating menu shifts
to the left with G highlighted.
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR UP or
CURSOR DOWN button to high-
light each rating you want. Then
press the CURSOR RIGHT but-
ton to turn the rating ON or OFF.
Turning the rating ON will block
programs with that rating from
being seen.
FEATURES
AutoLock
AutoLock
MOVIE RATING
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
G
PG
PG-13
R
NC-17
G
PG
PG-13
R
NC-17
OFF
AV3
ALL
1
2
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
MOVIE RATING OPTIONS
AutoLock
MOVIE RATING
NOTE: When a rating is turned
ON, all higher ratings also will be
turned on automatically. For exam-
ple, if the R rating is turned on, the
NC-17 and X ratings also will be
turned on.
G
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
G
PG
PG-13
R
NC-17
ON
AV3
ALL
1
PG
PG-13
R
2
NC-17
X
23
AUTOLOCK™ – BLOCKING BY TV RATING
ou also can select specific TV
Yratings that you want to censor
BEGIN
by following these steps.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the MENU button on the
remote control to show the
onscreen menu.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
POWER
SLEEP
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
5
SWAP
SOURCE
PIP CH
UP
FEATURES
TIMER
ACCESS CODE
- - - -
10
3
AutoLock
PIP
10
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
9
4
1
SOUND
PICTUR
8
7
CLOSED CAP
FORMAT
MENU
M-LINK
FEATURES
Enter your four-digit ACCESS
CODE and the menu will move to
the left with BLOCK CHANNEL
highlighted.
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
X X X X
VOL
CH
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
3
Press the CURSOR DOWN
button repeatedly until TV RAT-
ING is highlighted.
ITR/REC
HOME
VIDEO
PERSONAL
MOVIE
6
11
FEATURES
AutoLock
BLOCK CHANNEL
FEATURES
AutoLock
BLOCK CHANNEL
INCR. SURR.
SURF
AV2
AV3
ALL
1
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
Press the CURSOR RIGHT
button and the menu will shift to
highlight the TV RATING options.
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR UP or
DOWN button to select a rating.
Press the CURSOR RIGHT or
LEFT button to turn the block on
the rating ON or OFF.
AutoLock
TV RATING
AutoLock
TV RATING
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
OFF
AV3
ALL
1
ON
AV3
ALL
1
2
2
NOTE: More specific subratings
(for violence, sexual content, dia-
logue, or fantasy violence) are avail-
able for TV-Y7, TV-PG, TV-14, and
TV-MA.
TV-Y: (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including
children ages 2–6. This type of programming is not expected to frighten younger children.
To access these subratings, press
10
TV-Y7: (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for chil-
dren who have acquired the development skills needed to distinguish between make-believe and reality. This programming may
include mild fantasy and comic violence (FV).
the CURSOR RIGHT button.
Press the CURSOR UP or DOWN
button to select the subrating that
you want to block or unblock. Then
press the CURSOR RIGHT or
CURSOR LEFT button to turn the
block on the subrating ON or OFF.
TV-G: (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little
or no violence, no strong language, and little or no sexual dialogue or situations.
TV-PG: (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)
This type of programming contains one or more of the following: some suggestive dialogue (D), infrequent coarse language (L),
some sexual situations (S), or moderate violence (V).
TV-14: (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children
under 14 years of age.) This type of programming contains one or more of the following: intensely suggestive dialogue (D); strong,
coarse language (L); intense sexual situations (S); or intense violence (V).
Press the STATUS/EXIT but-
ton to remove the menu.
11
TV-MA: (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for
children under 17.) This type of programming contains one or more of the following: crude, indecent language (L); explicit sexual
situations (S); or graphic violence (V).
24
AUTOLOCK™ – TURNING BLOCK ON OR OFF
he BLOCKING control is what
Tcan be thought of as the Òmas-
ter switchÓ for AutoLockª. This
control affects the settings you have
chosen for blocking programs
according to movie ratings or TV
ratings, or for blocking programs
that have no rating or are unrated.
When the BLOCKING control is
OFF, the blocking or censoring of
programs is disabled. When the
BLOCKING control is ON, block-
ing will occur according to the set-
tings you have chosen. Follow
these steps to toggle BLOCKING
OFF or ON.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
TIME
START TIME
STOP TIME
CHANNEL
TUNER MODE
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
5
SWAP
SOURCE
PIP CH
UP
FEATURES
TIMER
AutoLock
PIP
BEGIN
ACCESS CODE
- - - -
8
4
1
Press the MENU button on the
remote control to show the
onscreen menu.
SOUND
PICTURE
M LINK
7
CLOSED CAP
FORMAT
3
MENU
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
8
VOL
CH
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
MUTE
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
3
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
9
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
FEATURES
AutoLock
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
Enter your four-digit
2
ACCESS CODE and the menu
will move to the left with BLOCK
CHANNEL highlighted.
FEATURES
AutoLock
SETUP CODE
AutoLock
BLOCK OPTIONS
AutoLock
BLOCK OPTIONS
Press the CURSOR DOWN
button repeatedly until BLOCK
OPTIONS is highlighted.
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
OFF
AV3
ALL
1
ON
AV3
ALL
1
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
Press the CURSOR RIGHT
button to enter the BLOCK
OPTIONS menu. BLOCKING will
be highlighted.
2
2
Press the CURSOR RIGHT or
LEFT button to toggle BLOCK-
ING ON or OFF.
Press the STATUS/EXIT but-
ton to remove the menu.
25
AUTOLOCK™ – BLOCKING UNRATED BROADCASTS
n addition to blocking specific
Iratings or channels, you may
choose to block all programming
that is unrated.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
BEGIN
FEATURES
TIMER
TIME
Press the MENU button on the
remote control to show the
onscreen menu.
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
5
SWAP
SOURCE
PIP CH
UP
FEATURES
TIMER
ACCESS CODE
- - - -
AutoLock
PIP
9
4
1
SOUND
PICTURE
M LINK
7
CLOSED CAP
FORMAT
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
3
MENU
9
Enter your four-digit
ACCESS CODE and the menu
will move to the left with BLOCK
CHANNEL highlighted.
VOL
CH
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
MUTE
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
3
ITR/REC
HOME
VIDEO
PERSONAL
MOVIE
6
Press the CURSOR DOWN
button repeatedly until BLOCK
OPTIONS is highlighted.
8
10
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the CURSOR RIGHT
button to enter the BLOCK
OPTIONS menu. BLOCKING will
be highlighted.
FEATURES
AutoLock
BLOCK CHANNEL
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR DOWN
button once to select BLOCK
UNRATED.
FEATURES
AutoLock
SETUP CODE
AutoLock
BLOCK OPTIONS
AutoLock
BLOCK OPTIONS
Press the CURSOR RIGHT
or CURSOR LEFT button to
toggle BLOCK UNRATED ON or
OFF.
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
OFF
OFF
ON
ON
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
10 Press the STATUS/EXIT but-
ton to remove the menu.
NOTE: If the BLOCK OPTION, BLOCK UNRATED
control is turned ON, all unrated programs will display
the screen shown to the left. To watch the channel,
enter your access code or change the BLOCK UNRAT-
ED option back to OFF.
Channel 12
Blocked by AutoLock
Unrated
Access Code
- - - -
26
AUTOLOCK™ – BLOCKING BROADCASTS THAT HAVE NO RATING
ome programming is not encod-
Sed with content advisory data by
the MPAA (Motion Picture
Association of America) or the tele-
vision broadcasters (see the expla-
nation on page 20). To block such
programming, follow these steps.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
BEGIN
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the MENU button on the
remote to show the onscreen menu.
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
ACCESS CODE
- - - -
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
5
SWAP
SOURCE
PIP CH
UP
FEATURES
TIMER
ACCESS CODE
- - - -
AutoLock
PIP
9
4
1
SOUND
PICTURE
M LINK
7
CLOSED CAP
FORMAT
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
3
MENU
Enter your four-digit ACCESS
CODE and the menu will move to
the left with BLOCK CHANNEL
highlighted.
VOL
CH
FEATURES
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
MUTE
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
3
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
8
Press the CURSOR DOWN
button repeatedly until BLOCK
OPTIONS is highlighted.
10
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
FEATURES
AutoLock
BLOCK CHANNEL
Press the CURSOR RIGHT
button to enter the BLOCK
OPTIONS menu. BLOCKING will
be highlighted.
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the CURSOR DOWN
button twice to highlight NO RAT-
ING.
FEATURES
AutoLock
SETUP CODE
AutoLock
BLOCK OPTIONS
AutoLock
BLOCK OPTIONS
Press the CURSOR RIGHT
or CURSOR LEFT button to tog-
gle NO RATING ON or OFF.
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
BLOCKING
BLOCK UNRATED
NO RATING
OFF
OFF
OFF
ON
ON
ON
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
10
Press the STATUS/EXIT but-
ton to remove the menu.
NOTE: If the BLOCKING OPTION, NO RATING
control is turned ON, all programs containing NO con-
tent advisory data will display the screen shown to the
left. To watch the channel, enter your access code or
change the NO RATING option back to OFF.
Channel 12
Blocked by AutoLock
No rating
Access Code
- - - -
27
AUTOLOCK™ – REVIEWING YOUR SETTINGS
o remind you which ratings you
Thave blocked and which Block
Options you have selected, a review
screen is available to review your
AutoLockTM settings. To access this
screen follow the steps below.
MOVIE RATING -
TV RATING -
Y7
-
-
R
NC17
X
-
PG
14
MA
BEGIN
BLOCK UNRATED ON
NO RATING OFF
Press the STATUS/EXIT but-
ton on your remote control twice.
Your AutoLockTM settings will
appear on the screen.
NOTE: If you have blocked specif-
ic subratings, such as V for Violence
in the TV-PG category, these
blocked subratings will not appear
in the review. The subratings how-
ever, are still blocked according to
your selections.
POWER
SLEEP
PIP
TV/VCR
A/CH
ON/OFF POSITION FREEZE
SWAP
SOURCE
PIP CH
UP
DN
After a few seconds, the set-
tings will leave the screen auto-
matically, or you can press the
STATUS/EXIT button a third time
to remove them from the screen.
SOUND
PICTURE
M LINK
MENU
VOL
CH
MUTE
SMART HELP
SOURCE STATUS/EXIT
CC
CLOCK
Remember, the review
screen will appear only if
BLOCKING is set to ON. For
details, see page 25.
ITR/REC
HOME
VIDEO
E PERSONAL
MOVIES
1
2
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
MOVIE RATINGS – Shows all blocked movie ratings that were set within the MOVIE
RATING feature. Some or all may be blocked at one time. NOTE: If a lower rating is
blocked, higher ratings also will be blocked automatically (for example, if R is set to be
blocked, X also will automatically be blocked).
MOVIE RATING -
TV RATING -
-
-
R
NC17
X
Y7
-
PG
14
MA
TV RATINGS – Shows all blocked TV ratings that were set within the feature. Some or all
may be blocked at one time. NOTE: If a lower rating is blocked, higher ratings also will be
blocked automatically (for example, if TV-14 is set to be blocked, TV-MA also will automati-
cally be blocked). TV ratings also have subratings for Violence (V), Fantasy Violence (FV),
Sexual Situations (S), Coarse Lanuage (L), and Suggestive Language (D). If the main rating
is turned OFF but the subrating is turned ON, the program will be blocked; however, the rat-
ing will not appear within the AutoLock review menu.
BLOCK UNRATED – Shows ON or OFF, depending on the status of the BLOCK UNRAT-
BLOCK UNRATED ON
NO RATING OFF
ED feature.
BLOCK NO RATING – Shows ON or OFF, depending on the status of the BLOCK NO
RATING feature.
28
AUTOLOCK™ – VIEWING BLOCKED PROGRAMMING
arious onscreen messages will
Vappear when someone tries to
view blocked programming. The
message is determined by how the
current programming is blocked.
You may view the blocked program-
ming and turn OFF the AutoLock™
feature by clearing all blocking
options or by entering your access
code.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
BEGIN
Press the MENU button on the
remote to show the onscreen menu.
FEATURES
TIMER
ACCESS CODE
- - - -
POWER
SLEEP
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
AutoLock
PIP
CLOSED CAP
FORMAT
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
5
SWAP
SOURCE
PIP CH
Press the CURSOR RIGHT
button and the menu will shift to
the left. Then press the CURSOR
DOWN button once to highlight
the AutoLock control.
UP
FEATURES
TIMER
ACCESS CODE
- - - -
AutoLock
PIP
1
SOUND
PICTURE
M-LINK
7
CLOSED CAP
FORMAT
Press the CURSOR RIGHT
button again to highlight ACCESS
CODE.
4
3
MENU
Enter your four-digit
ACCESS CODE and the menu
will move to the left with BLOCK
CHANNEL highlighted.
VOL
CH
FEATURES
TIMER
MUTE
ACCESS CODE
X X X X
2
SOURCE STATUS/EXIT
CC
CLOCK
AutoLock
PIP
CLOSED CAP
FORMAT
3
Press the CURSOR DOWN
button twice to highlight CLEAR
ALL.
ITR/REC
HOME
VIDEO
E PERSONAL
MOVIE
6
8
Press the CURSOR RIGHT
button twice. The CLEAR ALL
option will display the word
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
FEATURES
AutoLock
BLOCK CHANNEL
CLEARED. All blocked channels are
now viewable. This control clears
blocked channels only and will not
clear any channels being blocked by
Movie Ratings, TV Ratings, No
Rating, or Unrated settings.
AV2
AV3
ALL
1
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
2
Press the STATUS/EXIT but-
ton to remove the menu.
FEATURES
AutoLock
If you tune to a specific channel
that has been blocked by BLOCK
CHANNEL or any of the
AutoLock™ RATING options, sim-
ply enter your four-digit access
code to view the channel.
NOTE: this will unblock ALL
channels until the TV is shut OFF.
When powered back ON, all previ-
ously blocked channels will be
blocked again.
FEATURES
AutoLock
BLOCK CHANNEL
BLOCK CHANNEL
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
SETUP CODE
CLEAR ALL
MOVIE RATING
TV RATING
BLOCK OPTIONS
CLEARED
29
SOUND – ADJUSTING THE TREBLE, BASS, AND BALANCE
esides the normal volume level
Bcontrol, your TV also has indi-
vidual sound-adjustment controls.
The TREBLE (high frequency),
BASS (low frequency), and Speaker
BALANCE may all be used to
adjust the sound playback of TV
programs.
BEGIN
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
Press the MENU button on the
remote control to show the
onscreen menu.
SOUND
TREBLE
BASS
30
BALANCE
AVL
INCR. SURROUND
Press the CURSOR DOWN
button once to highlight SOUND.
Press the CURSOR RIGHT
button and the menu will shift to
the left. TREBLE will be highlight-
ed and an adjustment bar will be
shown to the right.
SOUND
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
POWER
SLEEP
30
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
Use the CURSOR RIGHT or
CURSOR LEFT button to adjust
the TREBLE (high frequency) level
of the televisionÕs sound.
UP
DN
SOUND
TREBLE
BASS
After adjusting the TREBLE
control, press the CURSOR
BALANCE
AVL
INCR. SURROUND
0
1
SOUND
PICTURE
M LINK
4
DOWN button to select another
sound adjustment: BASS or BAL-
ANCE. Press the CURSOR
RIGHT or CURSOR LEFT but-
ton to adjust the selected control.
3
MENU
VOL
CH
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
5
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SMART HELP
Remember, when the bar
scale is centered, speaker
BALANCE is centered between the
TVÕs left and right side speakers.
30
SOUND – ADJUSTING THE VOLUME
se the Volume Bar control to see
Uthe TVÕs volume level settings
on the TV screen. The Volume Bar
will be seen each time the VOLUME
buttons (on the TV or remote con-
trol) are pressed.
BEGIN
Press the VOLUME (+) or (Ð)
button on the remote control to
show the VOLUME bar display on
the screen.
Press the VOLUME (+) or (Ð)
button to adjust the televisionÕs
sound level.
VOLUME
15
POWER
SLEEP
PIP
ON/OFF POSITION FREEZE
SMART HELP
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
Try it out. Press the VOL
(+) and (Ð) buttons. The
UP
DN
VOLUME bar will appear near the
bottom center of the screen.
SOUND
PICTURE
M LINK
MENU
2
1
VOL
CH
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
31
SOUND – USING THE AVL (AUDIO VOLUME LEVELER)
n most cases, the volume levels
Icoming from broadcast program-
ming or commercials are never the
same. With the AVL (Audio Volume
Leveler) control turned ON, you can
have the TV level out sound that is
being heard. This makes for a more
consistent sound by reducing the
peaks and valleys that occur during
program changes or commercial
breaks. To turn the AVL ON, follow
these steps.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
BEGIN
30
Press the MENU button on the
remote control to show the
onscreen menu.
BALANCE
AVL
INCR. SURROUND
Press the CURSOR DOWN
button once to highlight SOUND.
SOUND
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
POWER
SLEEP
Press the CURSOR RIGHT
button and the menu will shift to
the left. TREBLE will be highlight-
ed and an adjustment bar will be
shown to the right.
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
OFF
ON
SWAP
SOURCE
PIP CH
UP
DN
OR
Press the CURSOR DOWN
button repeatedly until AVL is
highlighted. Then press the CUR-
SOR RIGHT or CURSOR LEFT
button to toggle AVL ON or OFF.
AVL
1
SOUND
PICTURE
M LINK
4
3
MENU
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
VOL
CH
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDEO
5
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
32
SOUND – USING INCREDIBLE SURROUND
he Incredible Surround feature
Tadds greater depth and dimen-
sion to both monaural (MONO)
and stereo TV sound. With the
control set to INCR. SURROUND
(Incredible Surround), the TVÕs
speakers can add even wider
sound separation to normal broad-
casts.
BEGIN
INCR. SURROUND
SPATIAL
Press the INCR. SURR. but-
ton on the remote control to turn
the Incredible Surround feature
ON.
When the TV signal is being
received in Stereo, pressing this
button will give you the options:
STEREO or INCR. SURROUND.
MONO OPTIONS ARE:
STEREO OPTIONS ARE:
POWER
SLEEP
INCR. SURR.
SPATIAL
INCR. SURR.
INCR. SURR.
OR
OR
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
INCR. SURR.
MONO
INCR. SURR.
STEREO
When the TV signal is in MONO,
the choices displayed will read
SPATIAL or MONO.
SWAP
SOURCE
PIP CH
Onscreen menu options for Incredible
Surround in MONO mode
Onscreen menu options for Incredible
Surround in STEREO mode
UP
DN
SOUND
PICTURE
M LINK
MENU
VOL
CH
MUTE
NOTE: If the TV signal is being
received from a stereo source, press-
ing the INCR. SURR. button will
toggle three choices: STEREO and
INCR. SURROUND.
NOTE: If the TV signal is being
received from a mono source, press-
ing the INCR. SURR. button will
cause either MONO or SPATIAL to
appear on the the screen.
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
INCR. SURROUND Ð widens the
sound, simulating a broader, fuller
sound.
SPATIAL Ð widens the sound, simu-
lating a broader, fuller sound.
1
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
33
SOUND – SETTING THE TV FOR STEREO AND SAP
ou can receive broadcast
Ystereo TV programs. The TV
has both an amplifier and twin
speakers through which the stereo
sound can be heard.
PICTURE
SOUND
TREBLE
BASS
BEGIN
FEATURES
INSTALL
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
Press the MENU button on
the remote control to show the
onscreen menu.
30
BALANCE
AVL
INCR. SURROUND
Press the CURSOR DOWN
button once to highlight the
SOUND menu.
SOUND
Press the CURSOR RIGHT
button and the menu will shift to
the left.
POWER
BASS
SLEEP
BALANCE
AVL
INCR. SURROUND
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the CURSOR DOWN
button repeatedly until the
STEREO
MONO
SWAP
SOURCE
PIP CH
UP
DN
STEREO control is highlighted.
OR
Press the CURSOR LEFT or
CURSOR RIGHT button to
select STEREO or MONO. When
STEREO has been selected, the
television will reproduce any
STEREO
STEREO
1
SOUND
PICTURE
M LINK
5
MENU
3
stereo broadcast signal it receives.
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
VOL
CH
MUTE
SMART HELP
2
OURCE STATUS/EXIT
CC
CLOCK
4
Remember, if stereo is not present
on a selected show and the TV is
placed in the STEREO mode, the sound
coming from the set will remain monaural.
ITR/REC
HOME
VIDEO
6
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SECOND AUDIO PROGRAM (SAP)
An SAP is an additional part of the
stereo broadcast system. Sent as a
third audio channel, an SAP can be
heard apart from the current TV pro-
gram sound. TV stations are free to
use SAP for any number of purpos-
es.
SOUND
SOUND
AVL
AVL
INCR. SURROUND
HEADPHONE
STEREO
INCR. SURROUND
HEADPHONE
STEREO
SAP
AVAILABLE
SAP
NOT AVAILABLE
If an SAP signal is not present with
a selected program, the SAP option
cannot be selected. Also, if SAP is
selected on a channel (with SAP)
and you select another channel,
when you return to the original
channel, SAP will be OFF. You will
have to reselect the SAP feature.
IF SECONDARY AUDIO PROGRAMING
IS BEING BROADCAST:
SAP
IF SECONDARY AUDIO PROGRAMING
IS NOT BEING BROADCAST:
AVAILABLE
SAP
NOT AVAILABLE
OR
OR
SAP
OFF
SAP
OFF
34
SOUND – SETTING THE AUDIO OUT CONTROL
f you have connected the TVÕs
IAUDIO OUTPUT jacks to the
AUDIO INPUT jacks on a stereo
receiver, set AUDIO OUT to either
VARIABLE or FIXED to determine
whether you adjust the volume at
the stereo or at the TV. If you
select VARIABLE, change the vol-
ume at the TV using the TVÕs
remote control. If you select
FIXED, adjust the volume at the
stereo using the stereoÕs controls.
To select FIXED or VARIABLE,
follow these steps.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR. SURROUND
SOUND
TREBLE
BASS
30
BALANCE
AVL
INCR. SURROUND
BEGIN
Press the MENU button on
the remote control to show the
onscreen menu.
SOUND
POWER
AVL
SLEEP
INCR. SURROUND
STEREO
SAP
Press the CURSOR DOWN
button once to highlight SOUND.
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
AUDIO OUT
FIXED
SWAP
SOURCE
PIP CH
Press the CURSOR RIGHT
button and the menu will shift to
the left.
UP
DN
OR
Press the CURSOR DOWN
button repeatedly until AUDIO
OUT is highlighted.
1
SOUND
PICTURE
M LINK
SOUND
5
AVL
3
MENU
INCR. SURROUND
STEREO
SAP
Press the CURSOR LEFT or
CURSOR RIGHT button to set
the AUDIO OUT to VARIABLE or
FIXED.
AUDIO OUT
VARIABLE
VOL
CH
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
MUTE
2
SOURCE STATUS/EXIT
CC
CLOCK
4
ITR/REC
HOME
VIDEO
PERSONAL
MOVIES
6
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
35
SOUND – USING THE TV SPEAKER CONTROL AND AUDIO OUTPUT JACKS
ould you like to hear TV pro-
Wgrams through your audio hi-
fi system? The TVÕs Audio Output
jacks and TV Speaker ON/OFF
control work together to offer you
PICTURE
SOUND
TREBLE
BASS
this TV sound option.
FEATURES
INSTALL
BALANCE
AVL
INCR. SURROUND
BEGIN
SOUND
TREBLE
BASS
30
Connect the R(ight) and
L(eft) AUDIO OUT jacks on the
TV to the R and L audio input
jacks on your amplifier or sound
system. Set the audio systemÕs
volume to a normal listening level.
BALANCE
AVL
INCR. SURROUND
SOUND
INCR. SURROUND
STEREO
SAP
AUDIO OUT
SPEAKERS
POWER
SLEEP
Turn the TV and audio sys-
tem ON. You can now adjust the
sound level coming from the audio
system with the VOLUME (+) or
(Ð) button on the TV or remote
control.
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
ON
SWAP
SOURCE
PIP CH
UP
DN
OR
SPEAKERS
OFF
To hear the TV sound from only
the audio system speakers:
3
SOUND
PICTURE
M LINK
7
5
MENU
Press the MENU button on
the remote control to show the
onscreen menu.
Press the CURSOR DOWN
VOL
CH
MUTE
button once to highlight SOUND.
4
SOURCE STATUS/EXIT
CC
CLOCK
8
8
6
Press the CURSOR RIGHT
button and the menu will shift to
the left.
M-Link
PIP ANT "B"
75‰
ITR/REC
HOME
VIDEO
+
R
–
–
L
+
7
MOVIES
SURROUND SOUND
Monitor out
VIDEO
AV1 in AV2 in
JACK PANEL
LOCATED ON THE
REAR OF THE
TELEVISION
INCR. SURR.
SURF
1
Press the CURSOR DOWN
button repeatedly until the
SPEAKERS control is highlighted.
ANT
75‰
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Y
L
S-VIDEO
Pb
Pr
AUDIO
R
Press the CURSOR RIGHT
or CURSOR LEFT button to
turn the televisionÕs speakers ON
or OFF. With the SPEAKERS con-
trol set to OFF, you should hear
the TV sound coming only from
the audio system speakers.
RCA PHONO
PLUG CABLES
AUDIO OUT
(RED/WHITE)
R
L
T
AUX/TV INPU
T
PHONO INPU
SMART HELP
Remember, the audio
system may have to be in
AUX(iliary) mode to play sound
from the TV.
2
AUDIO SYSTEM
36
SOUND – USING THE SURROUND SOUND EXTERNAL SPEAKER CONNECTIONS
y adding optional external
Bspeakers to the TVÕs sound sys-
tem, you can create the feeling of
reflected sound that surrounds you
at a movie theater or concert hall.
BEGIN
BACK OF TV
Connect both external speak-
ers to the speaker wire terminals
on the TV.
8
8
M-Link
PIP ANT "B"
75‰
+
R
–
–
L
+
SURROUND SOUND
Monitor out
A
V
1
i
n
A
V
2
i
n
ANT "A"
75‰
VIDEO
L/Mono
Y
S-VIDEO
Pb
Pr
AUDIO
R
Recommended speakers: 8 ohm,
15 watt minimum. Be sure the (+)
and (Ð) speaker wires are connect-
ed to the correct R(ight) and L(eft)
speaker terminals on the TV.
1
REAR SURROUND SOUND
SPEAKER TERMINALS
8
8
Place the speakers so that the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
M-Link
PIP ANT "B"
75‰
+
R
–
–
L
+
SURROUND SOUND
Monitor out
VIDEO
AV1 in AV2 in
Turn the TV ON. The rear
Surrond Sound speakers will not
be heard at the same volume level
as the front TV speakers. Adjust
the sound level with the Volume
buttons.
ANT "A"
75‰
Y
L/Mono
S-VIDEO
Pb
Pr
AUDIO
R
After setup, whenever a stereo sig-
nal is received, the audio will be
heard in Surround Sound.
+
-
+
-
SMART HELP
REAR SURROUND SOUND SPEAKERS
Remember, Surround
Sound will not work with
only one speaker connected, nor
with a monaural audio source sup-
plied, unless the Incredible
Surround feature is turned ON
(see page 33).
NOTE: The rear speakers are intended to give
a background noise effect that requires a lower
volume level than the TVÕs front speakers. The
volume level being heard from these speakers
will be lower than the volume level being
heard at the front TV speakers
TV
2
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA
37
SOUND – USING THE AUDIO/VIDEO INPUT JACKS
AUDIO/VIDEO INPUTS
NOTE: Repeatedly pressing the SOURCE button on
the remote control will toggle the picture source from
the current channel (Tuner A or B), the last viewed
channel, then AV1 (or CVI) connection, then the AV2
connection, and then the AV3 connection.
he TVÕs audio/video input
Tjacks are for direct picture
and sound connections between
the TV and a VCR (or similar
device) that has audio/video out-
put jacks.
BACK OF TV
8
8
M-Link
PIP ANT "B"
75‰
24
+
R
–
–
L
+
1
BEGIN
SURROUND SOUND
Monitor out
AV1 in AVn
Connect the VIDEO (yellow)
cable to the VIDEO AV1 jack on
the back of the TV. Then con-
nect the AUDIO (red and
white) cables to the AUDIO (left
and right) AV1 jacks on the rear
of the TV.
AV3
VIDEO
L
ANT "A"
75‰
Y
S-VIDEO
Pb
Pr
AUDIO
R
AV2
Connect the VIDEO (yellow)
cable to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) cables to the AUDIO (left
and right) OUT jacks on the rear
of the VCR.
AV1
VIDEO IN
(YELLOW)
AUDIO IN
(RED/WHITE)
2
Turn the VCR and the TV
ON.
R
L
POWER
VIDEO
OUT
S-VIDEO
OUT
ANT/CABLE
OUT
BACK OF VCR
SLEEP
Press the SOURCE button
on the remote control until the
AV1 source is selected. After
AV1 appears, insert a prerecord-
ed tape into the VCR and press
the PLAY button to view the tape
on the television. If AV1 did not
appear, perform steps 5Ð9.
AUDIO OUT
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
UP
DN
3
SOUND
PICTURE
M LINK
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
MENU
NOTE: the actions described in
steps 5Ð9 are not illustrated on
this page.
If you are using a
nonstereo device, use
only the Audio R jack.
If AV1 did not appear
onscreen as one of the choices
available to you by pressing the
SOURCE button, press the
M Link button on the remote
control to display the M-Linkª
onscreen menu..
CH
4
VOL
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
SIDE VIDEO
JACK PANEL INPUTS
INCR. SURR.
SURF
A
V
3
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the CURSOR RIGHT
or CURSOR LEFT button to
highlight CVI.
Press the CURSOR UP but-
ton to toggle from CVI to AV1.
Press the STATUS/EXIT
button to remove the M-Link™
menu from the screen.
NOTE: For more convenient direct playback con-
nections, you can use your TV’s side video input
panel, located on the right and angled toward the
front for easy access. The audio/video jacks in this
panel allow for quick connections that are especially
handy for playing back camcorder (composite video
or S-VHS) tape recordings. Press the remote control’s
SOURCE button to select the AV3 mode. Then use
the side jack panel inputs for playback on the TV.
Press the SOURCE button to
tune the AV1 source. You are
now ready to view the VCR tape
on the TV.
S-VIDEO
AUDIO
VIDEO
L
R
38
SOUND – USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)
S-VIDEO INPUT
he S(uper)-Video connection
NOTE: Repeatedly pressing the SOURCE
button on the remote will toggle the picture
source from the current channel, the last
viewed channel, then the AV1 (or CVI) con-
nection, the AV2 connection, and the AV3 con-
nection. Use AV2 for S-Video Connections.
Ton the rear of the TV can pro-
BACK OF TV
vide you with better picture detail
and clarity for the playback of
accessory sources such as DBS
(digital broadcast satellite), DVD
(digital video discs), video games,
and S-VHS VCR (video cassette
recorder) tapes than the normal
antenna picture connections.
8
8
M-Link
PIP ANT "B"
75‰
24
+
R
–
–
L
+
SURROUND SOUND
Monitor out
AV1 in AV2 in
1
AV3
VIDEO
L
ANT "A"
75‰
NOTE: The accessory device
must have an S-VIDEO OUT(put)
jack in order for you to complete
the connection on this page.
Y
S-VIDEO
Pb
Pr
AUDIO
R
AV2
BEGIN
AUDIO IN
(RED/WHITE)
Connect the S-VIDEO
AV1
CABLE to the S-VIDEO input
jack on the rear of the television.
Then connect the AUDIO (red
and white) cables to the AUDIO
S-VIDEO CABLE
(NOT SUPPLIED)
AV2 jacks on the rear of the TV
.
2
Connect the S-VIDEO
CABLE to the S-VIDEO output
jack on the accessory device.
Then connect the red and white
AUDIO cables to the AUDIO
(left and right) output jacks on the
rear of the accessory device.
L
R
POWER
SLEEP
VIDEO
OUT
S-VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
BACK OF ACCESSORY
SWAP
SOURCE
PIP CH
UP
DN
3
Turn the accessory device
ON.
SOUND
PICTURE
M LINK
DBS, DVD, Video Game, etc.
(EQUIPPED WITH S-VIDEO AND
AUDIO OUTPUT JACKS)
Press the SOURCE button on
the remote control to tune the
AV2 channel. You are now ready
to view the tape or disc on the
TV.
MENU
NOTE: If you are using a
nonstereo device, use only
the Audio R jack.
4
VOL
CH
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
SMART HELP
The S-VIDEO and
VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is
dominant when in use. If separate
video signals are connected to the
S-VIDEO and VIDEO AV2
in(puts), the signal from the
VIDEO AV1 in(put) will not be
usable.
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
If you have added AV2 in(puts) to
the TVÕs channel memory, just
press the CHANNEL (+) or (Ð)
button until the AV2 in(puts)
(channel) mode is selected.
39
SOUND – USING THE AUDIO/VIDEO INPUT JACKS (CONT’D)
COMPONENT VIDEO INPUTS
NOTE: Repeatedly pressing the SOURCE
button on the remote will toggle the picture
source from the current channel, the last viewed
channel, then the CVI (or AV1) connection, the
AV2 connection, and the AV3 connection. Use
CVI for Component Video Connections.
omponent Video inputs pro-
Cvide for the highest possible
color and picture resolution in the
playback of digital signal source
material, such as with DVD play-
ers. The color difference signals
(Pb, Pr) and the luminance (Y)
signal are connected and received
separately, which allows for
improved color bandwidth infor-
mation (not possible when using
composite video or S-Video con-
nections).
BACK OF TV
8
8
M-Link
PIP ANT "B"
75‰
+
R
–
–
24
1
SURROUND SOU
Monitor out
AAV2 in
2
AV3
VIDEO
L
ANT "A"
75‰
Y
S-VIDEO
Pb
Pr
AUDIO
R
BEGIN
AV2
Connect the Component (Y,
Pb, Pr) Video OUT jacks from
the DVD player (or similar
device) to the (Y, Pb, Pr) in(put)
jacks on the TV.
COMP
VIDEO
(BLUE)
COMP VIDEO
(BLUE)
CVI
COMP
VIDEO
(YELLOW)
COMP VIDEO
S-VIDEO
VIDEO
OUT
AUDIO
AUDIO IN
Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on the
rear of the accessory device to the
Audio (L and R) AV1 in(put) jacks
on the TV.
Y
Pb
Pr
R
OUT
L
(RED/WHITE)
OUT
1
2
Turn the TV and the DVD
(or digital accessory device)
ON.
POWER
SLEEP
3
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
Press the SOURCE button on
the remote control until the CVI
source is selected. After CVI
appears, insert a disc into the
DVD (or other digital accessory
device) and press the PLAY but-
ton to view the disc on the televi-
sion. If CVI did not appear, per-
form steps 5Ð9.
SWAP
SOURCE
PIP CH
BACK OF DIGITAL
ACCESSORY
UP
DN
DBS, DVD, Video Game, etc.
(EQUIPPED WITH COMPONENT VIDEO
OUTPUTS AND AUDIO OUTPUT JACKS)
SOUND
PICTURE
M LINK
NOTE: Optional video/audio cables (with
standard RCA plug connectors) are available
to complete your component video input jack
connections. Contact your dealer or our Parts
Information Center (1-800-851-8885) to order
any optional accessories.
MENU
NOTE: The actions described in
steps 5Ð9 are not illustrated on this
page.
CH
4
VOL
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
If CVI did not appear
onscreen as one of the choices
available to you by pressing the
SOURCE button, press the M
Link button on the remote con-
trol to display the M-Linkª
onscreen menu.
SMART HELP
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
The description for the
component video connectors
INCR. SURR.
SURF
may differ depending on the DVD
player or accessory digital source
equipment used (for example, Y,
Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb).
Although abbreviations and terms
may vary, the letters b and r stand
for the blue and red color compo-
nent signal connectors, and Y indi-
cates the luminance signal. Refer
to your DVD or digital accessory
ownerÕs manual for definitions and
connection details.
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
Press the CURSOR RIGHT
or CURSOR LEFT button to
highlight AV1.
Press the CURSOR UP but-
ton to toggle from AV1 to CVI.
Press the STATUS/EXIT but-
ton to remove the M-Link™ menu
from the screen.
Press the SOURCE button to
tune to the CVI source. You are
now ready to view the disc on the
TV.
40
REMOTE CONTROL – USING AUTOPICTURE™
hether you’re watching a
Wmovie or a video game, your
TV has automatic video control set-
tings that will match with your cur-
rent program source or content.
AutoPicture™ quickly resets your
TV’s video controls for a number of
different types of programs and
viewing conditions that you may
have in your home. The Movies,
Sports, Weak Signal, and
PERSONAL
BRIGHTNESS
COLOR
PICTURE
48
41
81
46
Multmedia AutoPicture™ controls
have been preset at the factory to
automatically adjust the TV’s
MOVIES
SHARPNESS
BRIGHTNESS
COLOR
PICTURE
40
31
20
16
brightness, color, picture, sharp-
ness, tint, and color temperature
levels. The Personal AutoPicture™
settings are the ones that you made
through the PICTURE options with-
in the onscreen menu.
SHARPNESS
POWER
SLEEP
SPORTS
BEGIN
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
62
31
62
16
PIP
TV/VCR
A/CH
ON/OFF POSITION FREEZE
Press the PICTURE button
on the remote control. The current
AutoPictureTM setting will appear in
the middle of the screen.
SWAP
SOURCE
PIP CH
UP
DN
2
WEAK SIGNAL
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
1
Press the PICTURE button
repeatedly to select either PER-
SONAL, MOVIES, SPORTS,
WEAK SIGNAL, or MULTI
MEDIA picture settings.
37
35
15
15
SOUND
PICTURE
M-LINK
MENU
NOTE: The PERSONAL setting
within AutoPictureTM is determined
by the setting used in the PICTURE
options within the onscreen menu.
All other settings are set up at the
factory during production and can-
not be adjusted.
MULTI MEDIA
BRIGHTNESS
COLOR
PICTURE
SHARPNESS
VOL
CH
MUTE
40
31
20
26
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
41
REMOTE CONTROL – USING AUTOSOUND™
utoSound™ allows you to
Aselect from three factory-set
controls and a personal control that
you set according to your own pref-
erences through the onscreen Sound
menu. The three factory-set controls
(Voice, Music, and Theatre) enable
you to tailor the TV sound so as to
enhance the particular program
you are watching. Follow these
steps to select any of the options.
PERSONAL
TREBLE
BASS
49
49
BEGIN
Press the SOUND button on
the remote control. The current
AutoSoundTM setting will appear in
the middle of the screen.
VOICE
TREBLE
BASS
56
47
Press the SOUND button
repeatedly to toggle among the
four settings: PERSONAL,
VOICE, MUSIC, or THEATRE.
POWER
SLEEP
MUSIC
PIP
NOTE: The PERSONAL setting
within AutoSoundTM is determined
by the settings used in the SOUND
options within the onscreen menu.
All other settings are set up at the
factory during production and can-
not be adjusted.
TV/VCR
A/CH
ON/OFF POSITION FREEZE
TREBLE
BASS
63
69
SWAP
SOURCE
PIP CH
UP
DN
2
1
THEATRE
SOUND
PICTURE
M-LINK
TREBLE
BASS
60
72
MENU
SMART HELP
Remember, AutoSoundTM
works only with the pro-
VOL
CH
MUTE
grams coming through the
ANTENNA/CABLE (ANT A or B)
input on the rear of the TV (RF
audio). It will not control the
sound levels for the external con-
nections.
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
AutoSound™ Options
PERSONAL Ð presents the TVÕs sound
according to the settings you make within the
sound menu.
VOICE Ð brings voices to the forefront and
emphasizes them. Moves music to the back-
ground.
MUSIC Ð emphasizes music over voices.
THEATRE Ð provides a balance between
voices and music.
42
REMOTE CONTROL – USING CHANNEL SURF
list or series of previously
Aviewed channels can be select-
ed with the SURF button on your
remote control. With this feature,
you can easily switch between dif-
ferent TV channels that currently
interest you. The SURF control
allows you to set up to ten channels
in its quick viewing list.
SURF
12
ADD?
SURF
12
DELETE?
SURF LIST EMPTY
BEGIN
Press the CHANNEL(+) or (Ð)
button (or the numbered buttons)
to select a channel to add to the
SURF list.
POWER
SLEEP
Press the SURF button on the
remote control. The onscreen dis-
play may read, ÒSURF LIST
EMPTY.Ó The number of the cur-
rent channel will be shown with
ÒADD?Ó to the right.
SURF
12
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
24
ADD?
SWAP
SOURCE
PIP CH
UP
DN
SURF
12
24
While the SURF list message or
the SURF channel list appears on
the screen, press the CURSOR
RIGHT button to add the present
channel to the SURF list.
DELETE?
SOUND
PICTURE
M LINK
4
3
MENU
If you want to delete the present
channel from the SURF list, press
the CURSOR RIGHT button
again.
1
SURF
12
24
32
VOL
CH
MUTE
Repeat steps 1 through 3 to add
more channels (up to 10) to the
SURF list.
ADD?
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
SURF
12
24
32
2
INCR. SURR.
SURF
DELETE?
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
A/CH BUTTON
Your remote also has an A/CH
(Alternate Channel) button.
Pressing this button will toggle
between the current and one previ-
ous channel.
NOTE: Along with regularly pro-
grammed channels, the external video
source connections can be added to the
SURF list. This means that the AV1,
AV2, and AV3 channels can be added to
your SURF list. Just tune to their chan-
nel and use the same procedure
5
R
SLEEP
1
22
IP
described on this page.
TV/VCR
A/CH
N/POSITION FREEZE
SWAP
SOURCE
PIP CH
UP
DN
43
PIP – BASIC CONNECTIONS
icture-In-Picture (PIP) is the
Pshowing of two pictures on the
TV screen at the same time (one
main screen picture and one small
picture, or PIP). For your ease and
convenience, this TV has two sepa-
rate inputs (ANTenna A and PIP
ANTenna B) for your homeÕs Antenna
and/or Cable TV system signal.
MAIN SCREEN PICTURE
PIP PICTURE
The ANT A input is primarily for the
TVÕ s main screen picture. The PIP
ANT B input is provided as a second
dedicated source option for the TVÕs
PIP ÒwindowÓ and its feature opera-
tions. The signal connected to the
PIP ANT B input can be either a split
signal input (as described in the sec-
tion on this page) or another type of
external signal source (such as a
satellite dish system, additional home
antenna, video accessory, etc.).
COMBINATION
VHF/UHF ANTENNA
BACK OF TV
300- TO 75-OHM
ADAPTER
See the following steps on how chan-
nels connected to the PIP ANT(enna)
B Input can be shown and used with-
in the PIP window.
TWIN LEAD WIRE
BEGIN
NOTE: An outdoor or indoor
antenna can be used to receive
normal broadcast channels
8
Connect your Antenna or
Cable TV signal to the single,
75-ohm input plug on a two-way
signal splitter (not supplied).
PIP ANT "B"
75Ω
M-Link
+
R
–
–
L
+
SURROUND SOUND
M
o
n
i
t
o
r
o
u
t
A
V
1
i
n
A
V
2
i
n
ROUND CABLE
(75 OHM)
ANT "A"
75Ω
VIDEO
L
Y
Pb
Pr
S-VIDEO
AUDIO
R
2–13 (VHF) and 14–69 (UHF)
ANT(enna)
“B”
2
1
Connect two lengths of RF coaxial
cable (F-type connectors on both
ends) to the two output plugs on
the two-way signal splitter.
8
8
M-Link
PIP ANT "B"
75Ω
+
R
–
–
L
+
SURROUND SOUND
Monitor out
AV1 in AV2 in
L
ANT "
75Ω
Connect the twin OUTPUT
plugs on the signal splitter to the
ANT A and PIP ANT B inputs on
the rear of the TV.
Pb
Pr
3
S-VIDEO
OPTIONAL
TWO–WAY SIGNAL SPLITER
with RF coaxial connecting cables
AUDIO
R
ANT(enna) “A”
CABLE TV SIGNAL
NOTE: The purpose of the PIP ANT B
input is to provide an easily connected,
dedicated picture source for PIP feature
use. Other signal source options (such
as a satellite dish system, an additional
external antenna, a VCR, or a video
game) also could be connected and dis-
played on the TVÕs PIP screen window
through the use of the PIP ANT B input.
CABLE TV
COMPANY
SMART HELP
ROUND CABLE (75 OHM)
For other possible PIP
connections see the “More
Connections” section on pages
48–49.
If you need any accessories or parts
to complete the described PIP con-
nections, contact your dealer, or call
our Parts Information Center at:
1-800-851-8885
44
PIP – SELECTING THE SIGNAL SOURCE
he picture for the PIP win-
Tdow can come through either
the ANT/CABLE or any of the
external Audio/Video connections
at the rear of the TV. PIP
MAIN SCREEN PICTURE
PIP PICTURE
SOURCE simply tells the TV
which one of these sources it is to
show in the PIP window.
AV 1
BEGIN
AV 2
24
Turn the TV and VCR (or
other device hooked to the exter-
nal A/V connections) ON.
AV 3
NOTE: The PIP source picture can come from the
ANT/CABLE input, the AUDIO/VIDEO AV1, the
AUDIO/VIDEO AV2, the AUDIO/VIDEO AV3, or
the S-VIDEO input jacks located at the rear and side
of the TV.
Press the PIP button on the
remote control. The PIP window
should appear in the upper right-
hand portion of the screen.
Press the SOURCE button
on the remote control to toggle
among the different external con-
nections.
1
POWER
SLEEP
2
PIP
ON/OFF POSITION FREEZE
H
The PIP SOURCE may come
from the following:
SWAP
SOURCE
PIP CH
UP
DN
AV1, AV2, AV3, S-VIDEO: for
picture signal coming from the
external audio/video jacks on the
TV. (You must have an external
device hooked up at these loca-
tions.)
VCR
(OR SIMILAR DEVICE)
3
SOUND
PICTURE
MENU
M LINK
ANTENNA/CABLE: for a pic-
ture signal coming from the
ANT/CABLE input on the back
of the TV.
VOL
CH
MUTE
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
45
PIP – REMOTE CONTROL BUTTONS
y using the PIP buttons on
Bthe remote control, you can
change the size of the PIP win-
dow and move and swap the PIP
picture with the main screen.
The PIP picture also can be
frozen within the PIP window.
BEGIN
Press the PIP ON/OFF but-
ton to show the PIP window.
PIP appears in one of the four
corners of the screen. Press the
PIP ON/OFF button again to
reduce the window size. Press
the PIP ON/OFF button a third
time to remove the PIP window
from the main screen.
1. PIP ON/OFF
Press the POSITION button
on the remote control to move
the PIP picture to any of the four
corners.
2. PIP POSITION
Press the FREEZE button on
the remote control to stop the
action within the PIP window.
Press the FREEZE button
again to resume the normal view-
ing action.
AV 1
3. PIP FREEZE
28
Press the PIP CH(annel)
UP/DN buttons on the remote
control to choose a different
channel or a differet PIP source.
24
26
2
Press the SWAP button to
swap the main screen picture
with the PIP picture. Pressing
the SWAP button again will
return the main picture to the
screen.
POWER
SLEEP
1
3
PIP
CR
A/CH
ON/OFF POSITION FREEZE
SWAP
SOURCE
PIP CH
UP
DN
4. PIP CHANNEL UP/DN
5
4
SOUND
PICTURE
M LINK
MENU
VOL
CH
MUTE
5. PIP SWAP
SOURCE STATUS/EXIT
CC
CLOCK
ITR/REC
HOME
VIDEO
HOME PERSONAL
MOVIES
46
PIP – ADJUSTING THE COLOR AND TINT
he Picture-in-Picture (PIP)
TCOLOR and TINT controls are
used to make fine-tune adjustments
to the picture settings for PIP
(when shown on the TV screen).
BEGIN
Press the MENU button on the
remote control to show the
onscreen menu.
PICTURE
SOUND
FEATURES
INSTALL
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
Press the CURSOR DOWN
button twice to highlight FEA-
TURES.
FEATURES
TIMER
TIME
AutoLock
PIP
CLOSED CAP
FORMAT
START TIME
STOP TIME
CHANNEL
TUNER MODE
Press the CURSOR RIGHT
button and the menu will shift to
the left.
FEATURES
Press the CURSOR DOWN
button twice to highlight PIP.
TIMER
AutoLock
PIP
CLOSED CAP
FORMAT
COLOR
TINT
POWER
SLEEP
Press the CURSOR RIGHT
button again to shift the display to
the COLOR adjustment bar.
PIP
ON/OFF POSITION FREEZE
TV/VCR
A/CH
SWAP
SOURCE
PIP CH
UP
DN
Press the CURSOR RIGHT or
the CURSOR LEFT button to
adjust the COLOR bar to the
desired level.
FEATURES
PIP
COLOR
TINT
35
35
1
SOUND
PICTURE
M LINK
6
8
Press the CURSOR DOWN
button to highlight the TINT
adjusmtent bar.
5
3
MENU
Press the CURSOR RIGHT or
the CURSOR LEFT button to
adjust the TINT bar to the desired
level.
FEATURES
PIP
VOL
CH
MUTE
COLOR
TINT
35
2
SOURCE STATUS/EXIT
CC
CLOCK
4
Press the STATUS/EXIT but-
ton to remove the menu from the
screen.
ITR/REC
HOME
VIDEO
PERSONAL
7
MOVIE
9
INCR. SURR.
SURF
PROGRAM LIST OPEN/CLOSE
OK
TUNER A/B
SMART HELP
Remember, although
there is a separate TINT
control for PIP, the adjustment lev-
els for this control depend on the
TVÕs main picture. For example, if
you are viewing a classic movie in
black and white, PIP also will be
seen in black and white (even
though the PIP picture source is in
color).
47
PIP – MORE CONNECTIONS
Cable Box and VCR Connections
his page shows how to hook
TPIP up with a cable box and a
VCR.
BEGIN
BACK OF TV
First, use an optional signal
splitter and connect the original
cable TV signal to both the CABLE
IN on the cable converter and the
ANTENNA plug on the back of the
television.
8
8
M-Link
PIP ANT "B"
75Ω
+
R
–
–
L
+
3
SURROUND SOUND
Monitor out
AV1 in A2 i
Connect the CABLE OUT on
the converter to the ANTENNA IN
on the VCR.
VIDEO
L
ANT "A"
75Ω
Pb
Pr
S-VIDEO
Connect the VIDEO OUT
jack on the VCR to the VIDEO IN
jack on the TV.
AUDIO
R
Also connect the AUDIO OUT
(right and left) jacks from the
VCR to the AUDIO IN jacks on the
television.
VIDEO CABLE
(YELLOW)
AUDIO CABLES
(RED AND WHITE)
1
OUT
OUT
ANTENNA
OUT
L
R
VIDEO
AUDIO
SIGNAL
SPLITTER
ANTENNA
IN
IN
IN
Contact the Parts
Information Center
at 1-800-851-8885
to order any optional
accessories.
VCR
2
CABLE OUT
CABLE IN
CABLE TV CONVERTER
48
PIP – MORE CONNECTIONS (CONT’D)
VCR and DVD Connections
he steps for hooking up a VCR
T(video cassette recorder), DVD
(digital video disc player), or simi-
lar device to work with PIP are
shown here.
BACK OF TV
BEGIN
First, connect the original
cable TV signal or antenna signal
to the ANTENNA IN jack on the
back of the VCR.
8
8
M-Link
PIP ANT "B"
75Ω
+
R
–
–
L
+
3
SURROUND SOUND
4
Mut
AV1 in AV2 in
2
Connect the ANTENNA OUT
jack on the back of the VCR to the
ANT(enna) ÒAÓ jack on the back of
the TV.
VIDEO
ANT "A"
75Ω
L
-VIDEO
AUDIO
R
Connect the yellow video
cable from the VIDEO OUT jack
on the VCR to the AV1 in(put)
VIDEO jack on the TV. Then con-
nect the red and white audio
cables from the AUDIO OUT jacks
(L and R) on the VCR to the AV1
in(put) AUDIO jacks on the back of
the TV.
AUDIO CABLES
(RED AND WHITE)
VIDEO
CABLE
(YELLOW)
VIDEO
CABLE
(YELLOW)
AUDIO CABLES
(RED AND WHITE)
Connect the yellow video
cable from the VIDEO OUT jack
on the DVD or similar device to the
AV2 in(put) VIDEO jack on the
TV. Then connect the red and
white audio cables from the
OUT
OUT
ANTENNA
OUT
1
AC-3(ANALOG OFF)
PCM(ANALOG ON)
PCM/
AC-3 DIGITAL
R
VIDEO
IN
L
AUDIO
IN
VIDEO
S
2
AUDIO SELECTION
VIDEO OUT
ANTENNA
IN
R
L
ANALOG
AUDIO OUT
AUDIO OUT jacks (L and R) on
the DVD or similar device to the
AV2 in(put) AUDIO jacks (L and
R) on the back of the TV.
VCR
DVD (OR SIMILAR DEVICE)
NOTE: Remember that when you
are selecting the PIP SOURCE, the
VCR will appear on the AV1 chan-
nel and the DVD or similar device
will appear on the AV2 channel.
75-OHM COAXIAL CABLE
1
OR
OUTSIDE UHF/VHF
ANTENNA OR
CABLE TV SIGNAL
49
TROUBLESHOOTING
lease make these simple checks
Pbefore calling for service.
Because charges for TV installa-
tion and adjustment of customer
controls are not covered under
your warranty, these tips can save
you time and money.
CAUTION: A video source (such as a video game, compact disc interactive [CDI], or
TV information channel) that shows a constant nonmoving pattern on the TV screen can
cause picture tube damage. When your TV is continuously used with such a source, the
pattern of the nonmoving portion of the game (or other source) can leave a permanent
image on the picture tube. When youÕre not using the video source, turn it OFF. Also,
regularly alternate the use of such video sources with normal TV viewing.
No Power
No Picture
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button again.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is being used.
• Check antenna connections. Are they properly secured to the TV's ANT A/B 75Ω plug?
• Check the TUNER MODE control for the correct tuner setting.
• Try running the Auto Program feature to find all available channels.
• Press the SOURCE button on the remote to make sure the correct signal source is
selected (AV1 [or CVI], AV2, AV3, or S-VIDEO).
No Sound
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• Check the SPEAKER onscreen control. If it is in the OFF position, sound at the set will
be eliminated.
• If you’re attempting to hook up auxiliary equipment, check the audio jack connections.
• (If applicable) Check the audio receiver for the correct operating mode.
• Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc Chloride) or
Alkaline batteries.
• Clean the remote control and the remote control sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into
the outlet and push the POWER button again.
Remote Does Not
Work
• Be sure the fuse is not blown on the AC power strip, if one is being used.
• Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong
Channel or No
Channels Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s
memory.
• Check to be sure the TUNER MODES are set to the CABLE option and run the Auto
Program feature to find all available channels.
Cleaning and Care
¥ To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet
before cleaning.
¥ When you are cleaning the TV, take care not to scratch or damage the screen surface
(avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean
cloth dampened with water. Use even, easy, vertical strokes when cleaning.
¥ Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of
cool, clear water. Use a clean, dry cloth to dry the wiped surfaces.
¥ Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they
might cause permanent marring of the cabinet finish.
50
GLOSSARY OF TELEVISION TERMS
Alternate Channel ¥ The feature that allows you to toggle
Multichannel Television Sound (MTS) ¥ The broadcast stan-
between the last two channels viewed by pressing the A/CH but- dard that allows for stereo sound to be transmitted with the TV
ton on the remote control.
picture.
Auto Programming ¥ The feature that, when activated, scans
for all available channels from regular antenna or cable signals
and stores only active broadcast stations in the TVÕs memory.
Onscreen Displays (OSD) ¥ The wording or messages generated
by the television (or VCR) to help you with specific feature con-
trols (color adjustment or programming, for example).
Channel Edit ¥ The feature that allows you to add or delete
channels from the list of channels stored in the TVÕs memory.
Channel Edit makes it easy to limit or expand the number of
channels that are available to you when you press the Channel
(+) or (Ð) buttons on your remote control.
Picture-in-Picture ¥ The showing of two pictures on the TV
screen at the same time (one main screen picture and one small
picture, or PIP).
Programming ¥ The process of adding or deleting channel num-
bers into the televisionÕs memory circuits. Through program-
ming, the TV ÒremembersÓ only the locally available or desired
channel numbers and skips over any unwanted channel numbers.
Closed Captioning ¥ The broadcast standard feature that allows
you to read the voice content of television programs on the TV
screen. Designed to help the hearing impaired, Closed
Captioning uses onscreen Òtext boxesÓ to show dialogue and
conversations while a TV program is in progress.
Remote Control Sensor Window ¥ The window or opening
found on the television control panel and through which infrared
remote control command signals are received.
Coaxial Cable ¥ A single, solid antenna wire normally matched
with a metal plug (F type) end connector that screws (or pushes)
directly onto a 75-ohm input found on the television or VCR.
Second Audio Program (SAP) ¥ An additional audio channel
provided for within the Multichannel Television Sound (MTS)
broadcast standard. The most frequently proposed use for SAP
is the simultaneous bilingual broadcast of TV material.
Direct Audio/Video Inputs ¥ Connectors, located on the rear of
the TV, used for the input of audio and video signals. These
inputs are designed for use with VCRs (or other accessories) in
order to receive higher picture resolution and offer sound-con-
nection options.
Status/Exit Button ¥ The remote-control function that allows
you to quickly confirm what channel number is being viewed.
Status/Exit also can be used to clear the television of onscreen
displays or information (rather than waiting for the displays to
Òtime out,Ó or automatically disappear from the screen).
Identify ¥ The method by which a TV remote control searches
and finds an operating code for another product (such as a VCR
or a cable converter). After the code has been Òidentified,Ó the
TV remote control can operate and send commands to the other
product.
TwinÐlead Wire ¥ The more commonly used name for the two-
strand, 300-ohm antenna wire used with many indoor and out-
door antenna systems. In many cases, this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75-ohm input terminals designed into the more recent TVs
and VCRs.
Incredible Stereo (or Surround) ¥ False acoustic management
of the audio signal that produces a dramatic expansion of the
wall of sound that surrounds the listener and heightens overall
viewing pleasure.
Menu ¥ An onscreen listing of feature controls that are available
for you to adjust.
51
INDEX
Accessories/Optional Parts . . . . . . . . . . . . . . . . .44, 48, *Q/U-1 ImageMax™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Alternate Channel Button (A/CH) . . . . . . . . . . . . . . . . . . . . .43 Incredible Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Antenna Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-1 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-3
Audio Out Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 M-Link-specific Remote Control Buttons
Audio Output Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 (MLink, ITR/REC, Home Video, Home Movies,
Audio/Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Personal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-2
AutoChron™ Control . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-4 Picture Adjustment Controls . . . . . . . . . . . . . . . . . . . . . . . . . .6
AutoLock™
PIP (Picture-in-Picture)
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Blocking Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Block No Rating Programs . . . . . . . . . . . . . . . . . . . . . . . . .27
Block ON/OFF Control . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 48–49
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Source Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Block Unrated Programs . . . . . . . . . . . . . . . . . . . . . . . . . .26 Registration/Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Movie Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Remote Control
Review AutoLock™ Settings . . . . . . . . . . . . . . . . . . . . . . .28
TV Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-2
Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-2
Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . . .20 S-Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Viewing Blocked Programming/Channels . . . . . . . . . . . . .29 Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 50
AutoPicture™ Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 SAP (Second Audio Program) Control . . . . . . . . . . . . . . . . . .34
Auto Program Channels Control . . . . . . . . . . . . . . . . . .*Q/U-3 Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
AutoSound™ Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 Start Time
AVL (Audio Volume Leveler) Control . . . . . . . . . . . . . . . . . .32
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Bass Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Activate Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Channel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Blue Mute Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Stereo/Mono Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Cable Box Connection . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-1 Stop Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Cable TV Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . *Q/U-1 Surf Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Channel Edit Control . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-4 Surround Sound (Connections) . . . . . . . . . . . . . . . . . . . . . . .37
Channel Name Control . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-4 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Timer Display Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Closed Captioning Control . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Component Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . .38 Treble Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
DVD (or similar device) Hookup . . . . . . . . . . . . . . . .38–40, 49 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-3
Dynamic Noise Reduction (DNR) Control . . . . . . . . . . . . . . .7 TV Keypad (Buttons) . . . . . . . . . . . . . . . . . . . . . . . . . .*Q/U-2
External Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . .37 TV Speaker Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 VCR Connections . . . . . . . . . . . . . . . . . . . . . . . . . . .38, 48–49
Format (Screen) Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . . .51 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
* Refer to the Quick Use and Installation Guide for information.
52
FACTORY SERVICE LOCATIONS
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★ Columbus
•
San Francisco/Metro Area
★ Los Angeles
Charlotte
★
•
★ Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
Atlanta/N Georgia
• Dallas
★ Wash/Balt
★ Orlando
•
Houston/Galveston
Tampa/W Florida
★ Ft. Myers/SW Florida
•
Beaumont
★ Indicates In-Home Service Only
1-800-242-9225
★ Miami/SE Florida
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge
Service. For Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la
garantie, contactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la
garantía, llame al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. BB
3135 015 07541
MAC2929 12/99
5533
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA
IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
GEORGIA
CENTRAL U.S.A.
ILLINOIS
Philips Factory Service of Georgia
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
Philips Factory Service Central US
950 Keynote Circle
Brooklyn Heights, OH 44131
(216) 741-3334
Philips Factory Service of Illinois
1279 W. Hamilton Pkwy.
Itasca, IL 60143
(770) 795-0085
(630) 775-0990
FLORIDA
MICHIGAN
TENNESSEE
Philips Factory Service of Florida
1911 US Highway 301 North
Tampa, FL 33619
Philips Factory Service of Michigan
25173 Dequindre
Madison Heights, MI 48071
(248) 544-2110
Philips Factory Service of East Tennessee
6700 D Papermill Rd.
Knoxville, TN 37919
(813) 621-8181
(423) 584-6614
WESTERN U.S.A.
DALLAS AREA
MID-ATLANTIC
Philips Factory Service Western Region
681 East Brokaw Rd.
San Jose, CA 95112
Philips Factory Service of Dallas
415 N. Main Street, #107
Euless, TX 76040
Philips Factory Service Mid-Atlantic
352 Dunks Ferry Rd.
Bensalem, PA 19020
(215) 638-7500
(408) 436-8566
(713) 682-3990
TEXAS
Philips Factory Service of Texas
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
(713) 682-3990
MAC2929 12/99
54
NOTES
55
LIMITED W ARRANTY
CO LO R TELEVISIO N
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
W HO IS CO VERED?
MAKE SURE YO U KEEP...
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
W HAT IS CO VERED?
BEFO RE REQ UESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
TO GET W ARRANTY SERVICE IN U.S.A.,
PUERTO RICO O R U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or author-
ized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
W HAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET W ARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
• a product used for commercial or institutional purposes.
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
W HERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consum er Electronics Com pany, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
Printed in U.S.A.
56
|
Iiyama HM703UT User Manual
Intel Box Core I5 4430 BX80646I54430 User Manual
JVC AV 32980 AV 36980 AV 27980 User Manual
LG Electronics LG Life Good Computer Monitor W2246T User Manual
Maytag MGC4430BD User Manual
Miele KM5944 User Manual
NEC Electronics America Computer Monitor LCD203WM User Manual
Oki B6300N User Manual
Philips 25PT5207 User Manual
Philips 170X7FB User Manual