Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
3121 235 20061
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the manu-
facturer.
17. Tilt/Stability - All televisions must comply with recommend-
ed international global safety standards for tilt and stability
properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
19. Power Lines - An outdoor antenna should be located away
from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con-
siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mats and supporting structure grounding of
the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
21 Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo-
sure through openings.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
TABLE OF CONTENTS
Here are a few of the special features built into this new
Color Television:
Introduction
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
AutoLock™ feature allows you to block the viewing of cer-
tain channels or external audio/video connections where you
might not want your children viewing inappropriate material.
Getting Started
Basic Cable TV Connection . . . . . . . . . . . . . . . . . .5
Basic Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . .6
Basic VCR to Television Connection . . . . . . . . . . . . . . . . . .7
Using the External Audio/Video Inputs . . . . . . . . . . . . . . . .7
Basic Television Operation . . . . . . . . . . . . . . . . . . . . . . . . . .8
Basic Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Description of Remote Control Buttons . . . . . . . . . . . . . . . .9
Infrared Remote Control works your TV set, and allows
you to program certain features with the press of one button.
Standard broadcast (VHF/UHF) or Cable TV (CATV)
channel capability.
Stereo TV with built-in audio amplifier and twin speaker
system for receiving TV programs broadcast in stereo sound.
Closed Captioning allows the viewer to read TV program
dialogue or voice conversations as on-screen text.
Install Menu
How to use the Language Control . . . . . . . . . . . . .10
How to use the Tuner Mode Control . . . . . . . . . . . . . . . . .11
How to Auto Program TV Channels . . . . . . . . . . . . . . . . . .12
How to Add or Delete Channels . . . . . . . . . . . . . . . . . . . . .13
Automatic Programming of Channels for quick and easy
selection of favorite stations available in your area.
On-screen Features (in either English or Spanish) show
helpful messages for setting of TV controls.
Picture Menu
How to use the Picture Adjustment Controls . . . . .14
How to use the DNR (Digital Noise Reduction) Control . . .15
How to use the Contrast + (Black Stretch) Control . . . . . .16
Audio/Video Jackpanel located on the front of the televi-
sion for direct connections with VCRs (Cameras, or DVD
players) providing quality TV picture and sound playback.
Sound Menu
How to Adjust the Bass, Treble
On Timer automatically turns the TV ON at a preset time,
and channel.
and Balance Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
How to Use the AVL Control . . . . . . . . . . . . . . . . . . . . . . .18
Setting the TV for Stereo Programs . . . . . . . . . . . . . . . . . .19
Sleeptimer automatically turns the TV OFF at preset times.
Auto Picture™ allows you to set the picture color, tint, con-
trast, etc. for various types of programming such as Sports,
Movies, Personal, Weak Signals or Multi Media with the
push of one button.
Let's
Features Menu
Look
Inside!
Using the Timer Controls . . . . . . . . . . . . . . . . . . .20
Understanding the AutoLock Controls . . . . . . . . . . . . . . . .21
Setting up the AutoLock Access Code . . . . . . . . . . . . . . . .22
How to Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .23
How to Clear All Blocked Channels at the Same Time . . .24
How to Block All Channels at the Same Time . . . . . . . . . .25
Blocking Programming Based on Movie Ratings . . . . . . .26
BlockingProgramming Based on TV Ratings . . . . . . . . . .27
Other AutoLock Blocking Options . . . . . . . . . . . . . . . . . . .28
How to use the Closed Captioning Control . . . . . . . . . . . .29
Auto Sound™ controls allow you to set the sound controls
for various types of listening programs such as Personal
(sound controls the way you set them), Theater, Music, or
Voice with the push of one button.
Bass, Treble, and Balance controls to enhance the televi-
sion’s sound.
NOTE: It is possible that this owner's manual may be
used with several different television models. Not all
features (and drawings) discussed in this manual will
necessarily match those found with your television sys-
tem. This is normal and does not require you contact-
ing your dealer or requesting service.
Remote Control Use
Setting up the Sleeptimer Option . . . . . . . . . . . . . . .30
Setting the Auto Picture Control . . . . . . . . . . . . . . .31
Setting the Auto Sound Control . . . . . . . . . . . . . . . . . . . . .32
Using the Quadra Surf Buttons (Alternate Channel) . .33-34
General Information
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . .35
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Factory Service Location . . . . . . . . . . . . . . . . . . . . . . . .38-39
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Auto Lock™, Auto Picture™, Auto Sound™
are all registered trademarks of Philips Consumer Electronics Company.
Copyright © 2001 All rights reserved.
4
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)
our Cable TV input into your
Yhome may be a single (75 ohm)
cable, or a Converter Box installa-
tion. In either case the connection to
the TV is very easy. Just put the
threaded end of the cable signal to
the TV's antenna plug and screw it
down finger tight.
If your Cable TV signal is a single
round cable (75 ohm) then you're
ready to connect to the TV.
If you have a Cable Converter Box:
Connect the Cable TV signal to the
Cable Signal IN(put) plug on the
75
⍀
Converter.
Connect the Cable TV cable to the
75Ω plug on the TV.
If you have a Cable Converter Box:
Connect the OUT(put) plug from the
Converter to the 75Ω plug on the TV.
SMART HELP
2
Remember: Set the TV for the
type signal you've just connected
(see the “Tuner Mode” section on page
11 of this manual.)
75 ⍀
Cable TV Company
Cable TV Signal Input
To select only the channel numbers on
your Cable system see “Auto Program"
(page 12). If you use a Cable Converter
box, set the TV to the same channel as
the converter's CH 3/4 switch (on the rear
of the converter.)
Back of TV
OR
OUT
IN
Round Cable
75Ω Ohm
1
Cable TV Converter
Box Connection
5
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)
combination antenna receives
Anormal broadcast channels
Note: For homes with separate UHF and VHF antennas
you will need an optional combiner to connect to the TV.
(VHF 2-13 and UHF 14-69). Your
connection is easy since there is
only one 75Ω (ohm) antenna plug
on the back of your TV - and that’s
U/V
Combiner
where the antenna goes.
If your antenna has a round cable
(75 ohm) on the end, then you're ready
Back of TV
to connect it to the TV.
If your antenna has flat twin-lead wire
(300 ohm), you first need to attach the
75-300 Ohm Adapter
antenna wires to the screws on a 300 to
75 ohm adapter.
Push the round end of the adapter
(or antenna) onto the 75Ω plug on the
rear of the TV. If the round end of the
antenna wire is threaded, screw it down
finger tight.
SMART HELP
Remember: Be sure to set the
TV for the type signal you've
75
⍀
connected (see the “Tuner Mode” sec-
tion on page 11 of this manual.)
To set the TV to select only the channel
numbers in your area see how to
“Program" or "Add" channels in the
TV’s memory on page 12 (Auto
Program section).
To order any optional accessory contact
your dealer or the Philips Parts Center
at 1-800-851-8885.
2
300 to 75Ω
Adapter
1
75 ⍀
Combination VHF/UHF
Antenna
(Outdoor or Indoor)
Back of TV
Twin Lead
Wire
OR
Round Cable
75Ω
6
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)
he basic Antenna, or Cable TV,
Tto VCR to TV connection is
shown to the right. For more infor-
mation on other hookups (possible
when Cable Converter/Descrambler
300 to 75Ω
Ohm Adapter
boxes are included) refer to your
Outdoor
VHF/UHF
Antenna
accessory VCR and Cable
Converter Owner's Manual for
details.
75
⍀
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
1
2
Connect the OUT TO TV plug on
the VCR to the 75Ω plug on the TV
(connecting cable supplied with the
VCR.)
75 ⍀
OR
Back of TV
Cable TV signal
Round Cable
75Ω Supplied with VCR
VCR
If your TV has FRONT A/V Inputs:
EXTERNAL A/V INPUTS
2
Audio Cables
udio and Video External Inputs are
Aavailable for a quick connection of
a VCR or to playback video from a
camera. Use the AV button on the
remote control to tune these inputs.
Front A/V Input Panel
Video Cable
L
AUDIO
R
VIDEO
INSTALL/MENU
1
–
VOLUME
+
CHANNEL
Connect the yellow video cable
from the Video output on the
VCR/Camera to the Video input located
on the FRONT or SIDE of the TV.
VIDEO
L
AUDIO
R
INSTALL/MENU
–
VOLUME
+
CHANNEL
Accessory device with A/V Outputs.
Front of TV
Connect the audio cables (red and
white) from the Audio Left and Right
outputs on the VCR/Camera to the
Audio L(eft) and R(ight) inputs located
on the FRONT or SIDE of the TV.
If your TV has SIDE A/V Inputs:
Video Cable
1
F
R
O
N
T
Note: The television will have to be
tuned to the “FRONT” channel using the
CH + or – buttons or by pressing the AV
button on the remote control to view
playback from an accessory device.
2
Audio
Cables
Side of TV
Accessory device with A/V Outputs.
7
BASIC TV/REMOTE OPERATIONS
TELEVISION
Note: Depending on the specific model of television that you purchased, the external
Audio/Video Jacks could be locate either on the front or the side of the TV cabinet.
Press the POWER button to turn
the TV ON.
Stereo
7
Note: You can also press any button on
the front of the TV to turn the TV ON.
FRONT
Press the VOLUME + button to
increase the sound level, or the VOL-
UME – button to lower the sound
level.
VIDEO
AUDIO
INSTALL/MENU
–
VOLUME
+
CHANNEL
Pressing both buttons at the same
time will display the on-screen menu.
Once in the menu, use these button to
make adjustments or selections.
Headphone Jack
L
AUDIO
R
VIDEO
INSTALL/MENU
Press the CHANNEL UP ▲ or
DOWN ▼ button to select TV chan-
nels.
–
VOLUME
+
CHANNEL
Headphone Jack
REMOTE
Point the remote control toward the
remote sensor window on the TV when
operating the TV with the remote.
Remote Sensor Window
1
3
2
INSTALL/MENU
–
VOLUME
+
CHANNEL
1
BATTERY INSTALLATION
3
2
4
o load the supplied batteries into
Tthe remote:
1. Remove the battery compartment
lid on the back of the remote.
2. Place the batteries (2-AA) in the
remote. Be sure the (+) and (-) ends of
the batteries line up correctly (inside of
case is marked.)
VOL
3. Reattach the battery lid.
Battery Lid
SMART HELP
Battery
Compartment
Remember, the tuned channel
number will always briefly
appear when the TV is first turned ON
(and with channel changes.)
2 “AA” Batteries
You can also press the STATUS/EXIT
button (on the remote) to see what
channel the TV is ON.
Bottom of Remote Shown
8
DESCRIPTION OF REMOTE CONTROL BUTTONS
QUADRA SURF Buttons - (Red,
Green, Yellow, Blue) Allows you to
store and surf up to 10 channels you
choose for each colored button.
POWER button - Press the Power but-
ton to turn the TV on or off.
A/CH Button - (Alternate Channel)
Press to toggle between the last view
channel and the channel presently
being viewed.
AV Button - Press to select an accesso-
ry signal input from the front AV
Inputs.
FROWNIE Button - Allows you to
delete stored channels within the
“Quadra Surf” lists for the colored but-
tons.
SMILEY Button - Press to add chan-
nels in the “Quadra Surf” lists. Works
with all colored buttons.
AUTO PICTURE Button - Press
repeatedly to choose from 5 different
factory pre-defined picture settings.
Choose from Personal (how you set the
Picture Menu adjustment controls),
Movies (when watching movies),
Sports (for any sporting event), Weak
Signal (used when the signal being
received is not the best), or Multi
Media (for use with video gaming).
CC Button - Press to activate the
Closed Captioning options. Repeatedly
press the CC button will scroll the
options available on the TV screen.
AUTO SOUND Button - Press repeat-
edly to choose from different factory
pre-defined sound settings. Choose from
Personal (how you set the Sound Menu
options), Voice (for programming with
speaking only), Music (for musical type
programs such as concerts), or Theatre
(used when watching movies).
VOL
STATUS/EXIT Button - Press to dis-
play the current channel number. If the
on-screen menu is displayed, press the
Status/Exit button will remove it from
the TV’s screen.
MENU Button - Press to display the
on-screen menu. Also can be used to
back out of the on-screen menu until it
disappears from the TV’s screen.
CURSOR
,
,
, or Buttons -
Press to navigate, select and adjust con-
trols within the on-screen menu.
VOL(ume) + or – Buttons - Press the
VOL + button to increase the TV’s
sound level. Press the VOL – button to
decrease the TV’s sound level.
CH(annel) + or – Buttons - Press to
select channels in ascending or
descending order.
NUMBERED (0-9) Buttons - Press
the numbered buttons to select TV
channels or to enter certain values
within the on-screen menu. For single
channel entries, press the numbered
button for the channel you desire. the
TV will pause for a second or two
before changing to the chosen channel.
MUTE Button - Press the mute button
to eliminate the sound being heard
from the TV. “MUTE” will be dis-
played on the TV’s screen. Press again
to restore the TV’s volume to it’s previ-
ous level.
SLEEP Button - Press the Sleep but-
ton to set the TV to automatically turn
itself off after a set period of time.
Press repeatedly to select 15, 30, 45,
60, 90, 120, 180, or 240 minutes.
CLOCK Button - Press to display the
“Timer” menu. Within this menu set
the time, set the TV to tune to a certain
channel at a certain time once, or daily.
9
USING THE LANGUAGE CONTROL
or our Spanish speaking TV owners
Fan on-screen LANGUAGE option is
present. With the LANGUAGE control
you can set the TV’s on-screen menu to
be shown in either English or Spanish.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the INSTALL menu
features.
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the word LANGUAGE is high-
lighted.
4
2
1
6
Press the CURSOR RIGHT ᮣ
button repeatedly to select ENGLISH
or ESPAÑOL (Spanish).
3
5
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
VO
2
4
SMART HELP
Remember: The Language
control only makes the TV’s on-
screen MENU items appear in English
or Spanish text.
It does not change the other on-screen
text features such as Closed Caption
(CC) TV shows.
10
HOW TO USE THE TUNER MODE CONTROL
he TUNER MODE control allows
Tyou to change the TV’s signal input
to either ANTENNA, CABLE or AUTO
mode. It’s important for the TV to know
what type of signal to look for. (From a
Cable TV signal or a normal Antenna
signal.) In the AUTO mode, when the
AUTO PROGRAM feature is activated,
the TV will automatically choose the
correct mode.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
4
Press the CURSOR RIGHT ᮣ
button to display the INSTALL menu
features.
2
1
6
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the words TUNER MODE is
highlighted.
3
5
VO
Press the CURSOR RIGHT ᮣ
button to select either ANTENNA,
CABLE, or AUTO mode.
2
4
When finished, press the STATUS
/EXIT button to remove the on-screen
menu from the TV’s screen.
SMART HELP
When CABLE is selected,
channels 1-125 are available.
When ANTENNA is selected, channels
2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
11
HOW TO AUTOMATICALLY PROGRAM TV CHANNELS
our TV can automatically set itself
Yfor local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your area
when the CHANNEL (+), (–) buttons
are pressed.
Main
Picture
Sound
Features
Install
Brightness
Color
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Language
Tuner Mode
Auto Program
Channel Edit
More...
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
Install
Language
Tuner Mode
Auto Program
Channel Edit
4
2
Press the CURSOR RIGHT ᮣ
button to display the INSTALL menu
features.
1
6
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the words AUTO PROGRAM are
highlighted.
3
5
VO
Press the CURSOR RIGHT ᮣ
button to start the Auto Program scan-
ning of channels. Auto Programming
will store all available channels in the
TV’s memory then tune to the lowest
available channel when done.
2
Auto Program
Channel
4
12
13
Auto Program
Channel
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
Auto Program
Channel
14
SMART HELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to the
TV’s memory.
If you want to delete any unwanted chan-
nels from the TV’s memory, refer to the
section on adding and deleting channels
(Channel Edit) on the next page.
12
HOW TO ADD OR DELETE TV CHANNELS
hannel Edit makes it easy for you
Cto ADD or DELETE channels from
the list of channels stored in the TV’s
memory.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the INSTALL menu
features.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll the Install
features until the words CHANNEL
EDIT are highlighted.
4
2
1
7
9
Press the CURSOR RIGHT ᮣ
button to display the CHANNEL
EDIT options.
3
With the CHANNEL EDIT
options displayed, and CHANNEL
NO. highlighted; enter the channel
number (with the NUMBERED or the
CH + or – buttons) you wish to add
(Skipped OFF), or delete (Skipped ON)
from the TV’s memory.
5
VO
8
2
4
6
Scroll down (using the CURSOR
DOWN ▼ button) to highlight the
word SKIPPED.
Now use the CURSOR RIGHT ᮣ
button to toggle between ON or OFF.
If ON is selected the channel is
skipped when scrolling channels with
the CH + or – buttons. If OFF is select-
ed the channel is not skipped when
scrolling channels with the CH + or –
buttons.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
13
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS
o adjust your TV picture controls,
Tselect a channel and follow the
steps shown below:
Main
Picture
Sound
Features
Install
Brightness
Color
Press the MENU button on the
remote to display the on-screen menu.
Picture
Sharpness
Tint
Picture
Brightness
Color
50
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the word PIC-
TURE is highlighted.
More...
Picture
Sharpness
Tint
Color Temp.
Press the CURSOR RIGHT ᮣ
button to display the PICTURE menu
features.
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Picture features
and highlight the control you wish to
adjust (Brightness, Color, Picture,
Sharpness, Tint, or Color Temp.).
6
Picture
Brightness
Color
4
2
65
50
1
7
Press the CURSOR RIGHT ᮣ or
the CURSOR LEFT ᮤ buttons to
adjust the selected control or to make
selections for the Color Temp. control
(Normal, Warm, or Cool).
Picture
Brightness
Color
Picture
5
6
3
5
Picture
VOL
Press the CURSOR UP ▲ or
DOWN ▼ buttons to select and adjust
other Picture Menu controls.
Brightness
2
Color
Picture
Sharpness
4
50
50
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
Picture
Brightness
Color
Picture
Sharpness
Tint
SMART HELP
BRIGHTNESS Press the ᮣ or
ᮤ buttons until darkest parts of the
picture are as bright as you prefer.
Picture
Brightness
Color
Picture
COLOR Press the ᮣ or ᮤ buttons to add
or eliminate color.
Sharpness
Tint
0
PICTURE Press the ᮣ or ᮤ buttons until
lightest parts of the picture show good
detail.
Picture
Brightness
Color
Picture
Sharpness
Tint
SHARPNESS Press the ᮣ or ᮤ buttons
to improve detail in the picture.
TINT Press the ᮣ or ᮤ buttons to obtain
natural skin tones.
Normal
Color Temp.
COLOR TEMP Press the ᮣ or ᮤ buttons
to select NORMAL, COOL, or WARM pic-
ture preferences. (NORMAL will keep the
whites, white; COOL will make the whites,
bluish; and WARM will make the whites,
reddish.)
Warm
or
Cool
14
HOW TO USE THE DNR (NOISE REDUCTION) CONTROL
or reasons such as poor cable
Freception, the picture can sometime
appear slightly “speckled” (or signal
noise shown in the picture). The DNR
(Dynamic Noise Reduction) control can
help eliminate this type of interference
and improve the quality of the picture.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Picture
Brightness
Color
Press the MENU button on the
50
remote to display the on-screen menu.
More...
Picture
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button until the
word PICTURE is highlighted.
Sharpness
Tint
Color Temp.
Press the CURSOR RIGHT ᮣ
button to display the PICTURE menu
features.
Picture
Color
Picture
Sharpness
Tint
4
2
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button to scroll
the Picture menu features until the word
DNR is highlighted.
1
6
Color Temp.
DNR
On
Press the CURSOR RIGHT ᮣ
button turn the DNR feature ON or
OFF.
3
5
VO
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
2
Picture
Color
Picture
Sharpness
Tint
4
Color Temp.
DNR
On
SMART HELP
“Noise” Reduction is a video
adjustment feature that affects the
OR
picture quality of the TV not the sound.
Picture
Color
NOTE: If the Sharpness control setting
is under 50 (see Picture Adjustments on
the previous page), the DNR control will
have little or no effect to the TV’s pic-
ture when switched to ON.
Picture
Sharpness
Tint
Color Temp.
DNR
Off
15
HOW TO USE THE CONTRAST + (BLACK STRETCH) CONTROL
he Contrast + (Black Stretch) con-
Ttrol helps to “sharpen” the picture
quality. The black portions of the pic-
ture become richer in darkness and the
whites become brighter.
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or CUR-
SOR DOWN ▼ button until the word
PICTURE is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the PICTURE menu
features.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button to scroll
the Picture menu features until the word
CONTRAST + is highlighted.
4
2
1
6
Press the CURSOR RIGHT ᮣ
button turn the CONTRAST + feature
ON or OFF.
3
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
5
VO
2
4
16
HOW TO ADJUST THE BASS, TREBLE, AND BALANCE CONTROLS
esides the normal volume level con-
Btrol, your TV also has Bass, Treble
and Balance sound controls. The TRE-
BLE BOOST control effects only the
high frequency sound coming from the
TV enhancing the highs; while the
BASS BOOST control effects only the
low frequency sound coming from the
TV enhancing the lows. The Balance
control adjusts the sound level being
heard from each speaker.
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button until the
word SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SOUND menu
features.
4
2
1
6
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button to scroll the
Sound menu features until the words
TREBLE BOOST, BASS BOOST or
BALANCE are highlighted.
3
5
Press the CURSOR RIGHT ᮣ or
VO
LEFT ᮤ button to turn the Treble or
Bass Boost controls On or OFF. Press
the CURSOR RIGHT ᮣ or LEFT ᮤ
2
4
button to adjust the Balance control.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
17
HOW TO USE THE AVL (AUTOMATIC VOLUME LEVELER) CONTROL
n most cases, the volume levels com-
Iing from broadcast programming or
commercials are never the same. With
the AVL (Audio Volume Leveler) control
turned ON, you can have the TV level
out sound that is being heard. This
makes for a more consistent sound by
reducing the peaks and valleys that
occur during program changes or com-
mercial breaks. To turn the AVL ON,
follow these steps.
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP
▲
or CUR-
SOR DOWN ▼ button until the word
SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SOUND menu
features.
4
2
1
Press the CURSOR UP
▲
or
6
CURSOR DOWN ▼ button to scroll
the Sound menu features until the word
AVL is highlighted.
Press the CURSOR RIGHT ᮣ
button to turn the AVL control ON or
OFF.
3
5
VO
2
4
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
18
HOW TO SET THE TV FOR STEREO PROGRAMS
our TV can detect a stereo signal
Yand will set itself automatically so
the stereo sound can be heard.
However, there may be occasions when
you might want to set the TV to mono.
The following steps describe how to
change the SOUND control:
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or CUR-
SOR DOWN ▼ button until the word
SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SOUND menu
features.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button to scroll
the Sound menu features until the word
SOUND is highlighted.
4
2
1
6
Press the CURSOR RIGHT ᮣ
button to select MONO or STEREO.
3
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
5
VO
2
4
With STEREO selected, the television
will reproduce any stereo broadcast sig-
nal it receives. Please note that you can
force a stereo broadcast signal to
MONO, but you cannot force a mono
broadcast signal to stereo.
SMART HELP
Remember: If stereo is not
present on a selected show the
“Sound” control cannot be set to Stereo.
On the other hand, if stereo is present
on a selected show the “sound” control
can be set to Mono.
During channel changes the screen may
indicate Mono for a moment then
change to Stereo if a stereo signal is
detected.
19
Let's
Look
Inside!
HOW TO THE TIMER CONTROLS
he Timer controls allow you to use
Tyour TV as an alarm clock if set to
turn itself on and off at a specific time.
It also can be set to tune to a specific
channel at a specific time.
Press the CLOCK button on the
remote to display the Timer on-screen
menu.
Press the CURSOR UP
▲
or
DOWN button to highlight one of
▼
the Timer controls you wish to set
(Time, Start Time, Stop Time, Channel
No., Activate, or Display).
Press the CURSOR RIGHT ᮣ
button to adjust the selected option.
TIME: Enter the current time with the
numbered buttons. Use the Cursor Right
button to move to the AM/PM area and use
the Cursor Left or Right to toggle AM/PM.
2
4
START TIME: Use the numbered buttons
to enter a start-up time for the TV to turn
on or to tune a specific channel.
STOP TIME: Use the numbered buttons
to enter a time for the TV to shut itself off.
3
CHANNEL NO.: Use the numbered but-
tons to select a specific channel for the TV
to tune to at the specific Start Time.
VO
2
ACTIVATE: Set the Timer to preform it’s
function ONCE or DAILY.
DISPLAY: Set to ON or OFF. When ON,
the time will be displayed ALL the time the
TV is on. If OFF is selected, the time will
only appear when the STATUS/EXIT but-
ton is pressed.
1
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
20
UNDERSTANDING THE AUTOLOCK CONTROLS
he AutoLock feature is an inte-
Tgrated circuit that receives and
processes data sent by broadcast-
ers, or other program providers,
that contain program content advi-
sories. When programmed by the
viewer, a TV with AutoLock can
respond to the content advisories
and block program content that
may be found objectionable (such
as offensive language, violence,
sexual situations, etc.). This is a
great feature to censor the type of
viewing children may watch.
Movie Rating
G
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
On
On
PG
PG-13
R
NC-17
X
Over the next few pages you’ll
learn how to block channels and
certain rated programming. Below
is a brief explanation of some terms
and ratings you will find in the
AutoLock feature.
MOVIE RATINGS
TV PARENTAL GUIDELINES
(MOTION PICTURE ASSOCIATION OF AMERICA)
(TV BROADCASTERS)
G: General Audience - All ages admitted.
Most parents would find this program suit-
able for all ages. This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or
situations.
TV-Y - (All children -- This program is
TV
designed to be appropriate for all chil-
Y dren.) Designed for a very young audi-
ence, including children ages 2-6. This type of
programming is not expected to frighten
younger children.
AutoLock offers various
BLOCKING controls from which
to choose:
Access Code: An Access Code
must be set to prevent children from
unblocking questionable or cen-
sored programming set by their par-
ents.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children.) It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
TV-Y7 - (Directed to Older Children -
TV
- This program is designed for children
Y7 age 7 and above.) It may be more
appropriate for children who have acquired the
development skills needed to distinguish
between make-believe and reality. This pro-
gramming may include mild fantasy and comic
violence (FV).
Channel Block: After an access
code has been programmed, you
can block individual channels
including the A/V inputs.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue.
TV-G - (General Audience -- Most par-
TV
G
ents would find this program suitable
for all ages.) This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or situa-
tions.
Clear All: Allows you clear all
channels being blocked from your
viewing set with the Channel Block
Control.
R: Restricted -This is programming is specif-
ically designed for adults. Anyone under the
age of 17 should only view this program-
ming with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence, intense sexual situ-
ations, strong coarse language, or intensely
suggestive dialogue.
TV-PG - (Parental Guidance
TV
PG
Suggested -- This program contains
Block All: Allows you to block
ALL channels and A/V inputs at
one time.
material that parents may find unsuit-
able for younger children.) This type of pro-
gramming contains one or more of the follow-
ing: Moderate violence (V), some sexual situa-
tions (S), infrequent coarse language (L), or
some suggestive dialogue (D).
Movie Ratings: Certain blocking
options exist which will block pro-
gramming based on ratings pat-
terned by the Motion Pictures
Association of America.
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence, explicit sex, or crude indecent lan-
guage.
TV-14 - (Parents Strongly Cautioned -
TV
- This program contains some material
14
that many parents would find unsuitable
TV Ratings: Just like the Movie
Ratings, programs can be blocked
from viewing using standard TV
ratings set by TV broadcasters.
for children under 14 years of age.) This type
of programming contains one or more of the
following: intense violence (V), intense sexual
situations (S), strong coarse language (L), or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
To learn more about the Motion
Picture Association of America
Ratings and the TV Broadcasters
Television Ratings, refer to the defi-
nitions listed on the columns to the
right.
TV-MA - (Mature Audience Only --
TV
MA
This program is specifically designed to
be viewed by adults and therefore may
be unsuitable for children under 17.) This type
of programming contains one or more of the
following: graphic violence (V), explicit sexual
situations (S), or crude indecent language (L).
21
SETTING UP THE AUTOLOCK ACCESS CODE
ver the next few pages you’ll learn
Ohow to block channels and get a
better understanding of the rating terms
for certain programming.
First, let’s start by learning how to set a
personal access code:
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Timer
Sound
Features
Install
AutoLock
More...
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button until the word FEA-
TURES is highlighted.
Features
Timer
AutoLock
4
2
Time
Start Time
Stop Time
Channel
Activate
Display
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
1
Press the CURSOR UP
▲
or
DOWN
▼
button until the words
3
5
AUTOLOCK are highlighted.
VOL
2
Features
Timer
4
Press the CURSOR RIGHT ᮣ
button. The screen will read,
“ACCESS CODE - - - - .”
Timer
AutoLock
Start Time
Stop Time
Channel
Activate
Display
6
7
Using the NUMBERED buttons,
enter 0, 7, 1, 1. “XXXX” appears on
the Access Code screen as you press the
numbered buttons.
“INCORRECT CODE” will appear on
the screen, and you will need to enter 0,
7, 1, 1 again.
NOTE: The 0,7,1,1 access code shown
on this page is the default code or a
way to reset the code when the current
access code is not known.
Features
Timer
AutoLock
Access Code
- - - -
The screen will ask you to enter a
“New Code.” Enter a “new” 4 digit
code using the NUMBERED buttons.
The screen will then ask you to CON-
FIRM the code you just entered. Enter
your new code again. “XXXX” will
appear when you enter your new code
and then display the AutoLock menu
options.
Features
Timer
AutoLock
Features
Timer
AutoLock
Features
Timer
AutoLock
Access Code
XXXX
Incorrect
Access Code
XXXX
Access Code
XX - -
Proceed to the next page to learn more...
SMART HELP
Features
Timer
AutoLock
Features
Timer
AutoLock
Features
Timer
AutoLock
New Code
- - - -
New Code
XXX -
Confirm Code
XXXX
Parents - it isn’t possible for
your child to unblock a channel
without knowing your access code or
changing it to a new one. If your code
changes, and you didn’t change it, then
you know it’s been altered by someone
else and blocked channels have been
viewed.
The AutoLock
Access Code also
can be changed
anytime using the
Setup Code feature
AutoLock
Block Channel OffStop Time
Setup Code
Clear All
Block All
AutoLock
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
Channel
Activate
Display
OffStop Time
Channel
Activate
Movie Rating
TV Rating
Display
22
HOW TO BLOCK CHANNELS
fter your personal access code has
Abeen set (see previous page), you
are now ready to select the channels
you want to block out or censor.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Press the NUMBERED (or CH +,
–) buttons to tune the channel you
wish to block or censor.
Main
Picture
Sound
Features
Install
Timer
AutoLock
More...
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
8
Features
Timer
AutoLock
5
3
Time
Start Time
Stop Time
Channel
Activate
Display
2
8
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
AutoLock are highlighted.
4
6
VO
9
3
Features
Timer
AutoLock
5
10
Timer
Start Time
Stop Time
Channel
Activate
Display
Press the CURSOR RIGHT ᮣ
button.
1
7
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. AutoLock
menu options will be displayed.
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Features
Timer
AutoLock
Access Code
- - - -
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
BLOCK CHANNELS are highlighted.
Press the CURSOR RIGHT ᮣ
button to turn blocking ON or OFF for
that channel. When ON is selected the
channel will be blocked.
Features
Timer
AutoLock
AutoLock
AutoLock
Block Channel OnStop Time
Setup Code
Clear All
Block All
Block Channel
Setup Code
Clear All
Block All
Movie Rating
TV Rating
OffStop Time
Channel
Activate
Access Code
XXXX
Channel
Activate
Display
10
Press the CH + or – button to
select other channels you wish to
block. Repeat step 9 to block the new
channel.
Display
Movie Rating
TV Rating
Channel 12
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
Blocked By AutoLock
Channel Blocking
Access Code
- - - -
SMART HELP
If you tune to a blocked chan-
nel and enter your Access Code
to view the channel, ALL blocked chan-
nels will be viewable until the TV has
been turned off. When the TV is pow-
ered back ON, the previously blocked
channels will be blocked again.
23
HOW TO CLEAR BLOCKED CHANNELS AT THE SAME TIME
fter blocking specific channels there
Amay come a time when you want to
clear all the channels so they can be
viewed. The following steps explain
how to CLEAR ALL blocked channels.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
Press the CURSOR RIGHT ᮣ
7
button to display the FEATURES
4
menu options.
2
1
7
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
AutoLock are highlighted.
3
Press the CURSOR RIGHT ᮣ
button.
5
VOL
8
2
4
9
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. AutoLock
menu options will be displayed.
6
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
CLEAR ALL are highlighted.
Press the CURSOR RIGHT ᮣ
button to clear all blocked channels.
The Clear All option will read,
“Cleared.”
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
SMART HELP
If you tune to a blocked chan-
nel and enter your Access Code
to view the channel, ALL blocked chan-
nels will be viewable until the TV is
powered OFF and then turned back ON.
When the TV is powered back ON, the
previously blocked channels will be
blocked again.
The Clear All option when activated
will unblock ALL blocked channels. It
will not affect programming blocked
by the Movie or TV Rating options.
Or, enter your Access
CLEAR ALL will not work with the
Movie and TV Ratings. These options
must be reset individually.
Code to view a tuned
channel that is blocked
with Block Channel.
24
HOW TO BLOCK ALL CHANNELS AT THE SAME TIME
here may come a time when you
Twant to Block All the television’s
channels. Maybe you don’t want your
children to watch TV for a given time.
With the Block All control, ALL avail-
able channels (including the A/V
Inputs) can be set to block at the same
time.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Timer
AutoLock
More...
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ button until the word FEA-
TURES is highlighted.
Features
Timer
AutoLock
7
Timer
4
2
Start Time
Stop Time
Channel
Activate
Display
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
1
7
9
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
AutoLock are highlighted.
3
5
VO
8
Features
Timer
AutoLock
2
Timer
4
Start Time
Stop Time
Channel
Activate
Display
Press the CURSOR RIGHT ᮣ
button.
6
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. AutoLock
menu options will be displayed.
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Features
Timer
AutoLock
Access Code
- - - -
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
BLOCK ALL are highlighted.
Press the CURSOR RIGHT ᮣ
button to turn Block All ON or OFF.
When ON is selected, ALL available
channels will be blocked.
Features
Timer
AutoLock
AutoLock
AutoLock
Block Channel
Setup Code
Clear All
Block Channel
Setup Code
Clear All
Access Code
XXXX
Block All
Movie Rating
TV Rating
Off
Block All
Movie Rating
TV Rating
On
When finished, press the STA-
TUS/EXIT button to remove the
menu from the screen.
Channel 12
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
Blocked By AutoLock
Channel Blocking
Access Code
- - - -
SMART HELP
If you tune to a blocked chan-
nel and enter your Access Code
to view the channel, ALL blocked chan-
nels will be viewable until the TV has
been turned off. When the TV is pow-
ered back ON, the previously blocked
channels will be blocked again.
25
BLOCKING PROGRAMMING BASED ON MOVIE RATINGS
here are two types of program rat-
Tings within the AutoLock feature.
One is based on the Movie Industry rat-
ings while the other is based on the TV
Industry ratings. Both can be used to
block or censor programming that has
been rated in either manner.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Sound
Features
Install
Timer
AutoLock
Let’s first look at the Movie Rating
options of AutoLock:
More...
Press the MENU button on the
Each Movie Rating can
be turned “ON” or “OFF.”
remote to display the on-screen menu.
9
7
Features
Timer
Press the CURSOR UP ▲ or
DOWN ▼ button until the word FEA-
TURES is highlighted.
4
2
Time
AutoLock
Start Time
Stop Time
Channel
Activate
Display
1
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
3
5
10
VO
Press the CURSOR UP
DOWN button until AutoLock is
highlighted.
▲
or
8
2
Features
Timer
▼
4
Timer
7
AutoLock
Start Time
Stop Time
Channel
Activate
Display
9
Press the CURSOR RIGHT ᮣ
button. The screen will prompt you
for your Access Code.
6
Using the NUMBERED buttons
on the remote, enter your 4 digit
Access Code. The AutoLock menu
options will be displayed.
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Features
Timer
AutoLock
Access Code
- - - -
Press the CURSOR UP
▲
or
DOWN
▼
button to highlight the
words MOVIE RATINGS.
Press the CURSOR RIGHT ᮣ
button to display the MOVIE RAT-
INGS options (G, PG, PG-13, R,
NC17, or X).
Features
Timer
AutoLock
AutoLock
Movie Rating
G
PG
PG-13
R
Block Channel
Setup Code
Clear All
G
PG
PG-13
R
Off
Access Code
XXXX
Press the CURSOR UP
▲
or
Block All
DOWN ▼ button to highlight any of
the Movie Ratings options. When high-
lighted, all these options can be turned
ON (which will allow blocking) or
OFF (which will allow viewing).
Movie Rating
TV Rating
NC-17
More...
NC-17
X
Use the CURSOR RIGHT ᮣ but-
10
Movie Rating
G
PG
PG-13
R
On
ton on the remote to turn the rating
Channel 12
Blocked By AutoLock
Movie Rating
OffStop Time
Channel
Activate
option ON or OFF.
NC-17
X
Display
Access Code
- - - -
SMART HELP
To view a program blocked by
the Movie Rating options, enter
your 4 digit access code. This
will disable all blocked Movie
Ratings until the TV is powered
off and on again. Then the block-
ing options will be restored.
When a rating is set to block,
all higher ratings will be auto-
matically blocked as well. (Example: If
the the PG-13 rating is set to block, the
R, NC-17, and X ratings will also be
blocked.
26
BLOCKING PROGRAMMING BASED ON TV RATINGS
his portion of the AutoLock features
Tcover program ratings based on the
TV Industry rating system. This is
known as TV Ratings within AutoLock.
After selecting the Autolock feature and
entering your personal access code, the
AutoLock options screen appears;
AutoLock
Block Channel TV-Y
Setup Code
Clear All
TV-Y7
TV-G
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block All
Movie Rating
TV Rating
TV-PG
TV-14
TV-MA
Off
Scroll the menu using the CUR-
SOR UP ▲ or DOWN ▼ buttons
until the words TV RATINGS are
highlighted.
Press the CURSOR RIGHT ᮣ but-
ton to display the TV Ratings (TV-Y,
TV-Y7, TV-G, TV-PG, TV-14, or TV-
MA). When highlighted, the TV-Y and
TV-G can be turned ON (which will
allow blocking) or OFF (which will
allow viewing), of these rated programs.
The ratings of TV-Y7, TV-PG, TV-14,
TV-MA can be customized to block V
(violence), FV (fantasy violence), S
(sexual situations), L (coarse language),
or D (suggestive dialogue).
To view a program
blocked by the TV Rating
options, enter your 4 digit
access code. This will
disable all blocked TV
Ratings until the TV is
powered off and on
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
5
On
3
1
again. Then the blocking
options will be restored.
2
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
4
Block All
FV
VOL
6
1
3
5
Press the CURSOR UP ▲ or
DOWN ▼ button to highlight the
desired rating.
TV-MA
Channel 12
Blocked By AutoLock
TV Rating
OffStop Time
Channel
Activate
Display
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Press the CURSOR RIGHT ᮣ
button on the remote to turn the TV-Y
or TV-G rating ON or OFF. Or, press
the CURSOR RIGHT ᮣ button to
enter the sub-menus for the TV-Y7, TV-
PG, TV-14 or TV-MA ratings.
Off
Access Code
- - - -
If the TV-Y7, TV-PG, TV-14 or TV-
MA sub-menu is accessed, press the
CURSOR UP ▲ or CURSOR DOWN
▼ button to select one of the options
(Block All, V, S, L, D, or FV).
TV Rating
TV-Y
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Rating
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Block All
Block All
Block All
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
V
S
L
V
S
L
V
S
L
D
D
Press the CURSOR RIGHT ᮣ
button on the remote to turn the option
ON or OFF.
TV Ratings and
Rating Sub-Menus
When a TV Rating is selected to block,
ALL higher ratings will be blocked also.
TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type of program-
ming is not expected to frighten younger children.
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for children who have acquired the development
skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).
TV-G - (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little or no violence, no strong language and little
or no sexual dialogue or situations.
TV-PG - (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)This type of programming contains one or
more of the following: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).
TV-14 - (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children under 14 years of age.) This type of pro-
gramming contains one or more of the following: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V).
TV-MA - (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) This type of pro-
gramming contains one or more of the following: crude indecent language (L), explicit sexual situations (S), or graphic violence (V).
27
USING THE AUTOLOCK BLOCKING OPTIONS
utoLock offers the viewer other
Ablocking features as well. With
these Blocking Options, the censoring
can be turned ON or OFF.
Main
Picture
Sound
Features
Install
Brightness
Color
Picture
Sharpness
Tint
Main
Picture
Timer
Sound
Features
Install
AutoLock
Press the MENU button on the
remote to show the on-screen menu.
More...
Press the CURSOR UP ▲ or
DOWN ▼ button until the word
FEATURES is highlighted.
9
4
Features
Press the CURSOR RIGHT ᮣ
button to display the FEATURES
menu options.
7
Timer
AutoLock
Time
Start Time
Stop Time
Channel
Activate
Display
2
1
Press the CURSOR UP ▲ or
DOWN ▼ button until the words
AutoLock are highlighted.
10
3
5
10
VOL
Features
Timer
8
Press the CURSOR RIGHT ᮣ
button.
2
Timer
4
9
AutoLock
Start Time
Stop Time
Channel
Activate
Display
7
Enter the correct access code
number. “XXXX” shows on the
Access Code display as you press the
NUMBERED buttons. AutoLock
menu options will be displayed.
6
NOTE: Remember, if you ever forget
your Access Code, the 0,7,1,1 access
code is the default code or a way to
reset the code when the current access
code is not known.
Features
Timer
AutoLock
Access Code
- - - -
Press the CURSOR UP ▲ or
DOWN ▼ buttons until the words
BLOCKING OPTIONS are highlight-
ed.
Press the CURSOR RIGHT ᮣ
button to display the Blocking
Options (BLOCKING, UNRATED,
or NO RATING) menu.
AutoLock
Setup Code
Clear All
Features
Timer
AutoLock
AutoLock
Block Channel OffStop Time
Access Code
XXXX
Setup Code
Clear All
Block All
Channel
Activate
Display
Block All
Movie Rating
TV Rating
Blocking Options
Press the CURSOR UP ▲ or
DOWN ▼ buttons to highlight the
desired feature.
Movie Rating
TV Rating
10
When highlighted, each feature can
be turned ON or OFF using the CUR-
SOR RIGHT ᮣ or LEFT ᮤ buttons
on the remote.
Blocking Options
Blocking
Unrated
Blocking Options
Blocking
Unrated
Blocking Options
Blocking
Unrated
On
On
No Rating
No Rating
No Rating
On
BLOCKING OPTIONS:
BLOCKING: This is what might be called the “master switch” for AutoLock. When in the ON position, ALL blocking/censoring
will take place. When in the OFF position, ALL blocking is disabled.
UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set
to ON and the BLOCKING feature is set to OFF.
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING
feature is set to OFF.
28
Let's
Look
Inside!
HOW TO USE THE CLOSED CAPTION CONTROL
losed Captioning (CC) allows you
Cto read the voice content of televi-
sion programs on the TV screen.
Designed to help the hearing impaired,
this feature uses on-screen “text boxes”
to show dialogue and conversations
while the TV program is in progress.
BEGIN
Press the CC button on the remote
to display the current Closed Caption set-
ting.
Press the CC button repeatedly to
choose from the four Closed Caption
options (CC Off, CC 1, CC 2, CC
Mute). Dialogue (and descriptions) for
the action on the captioned TV program
will appear on-screen if the tuned pro-
gram is broadcasting CC information.
When finished, press the STATUS
/EXIT button to remove the menu from
the TV’s screen or let the option time out
and disappear from the TV screen.
2
1
3
SMART HELP
Not all TV programs and
product commercials are made
VOL
with Closed Caption (CC) information
included. Neither are all Closed Caption
modes (CC1, or CC2) necessarily being
used during the transmission of a closed
caption program. Refer to your area's
TV program listings for the stations and
times of Closed Caption shows.
NOTE: The CC MUTE option
can be used to set the TV to
turn the Closed Caption mode
“ON” whenever the MUTE but-
ton on the remote is pressed.
This activates the CC1 option.
29
SETTING UP THE SLEEPTIMER OPTION
ave you ever fallen asleep in front
Hof the TV only to have it wake you
up at two in the morning with a test
pattern screeching in your ears? Well,
your TV can save you all that trouble
by automatically turning itself off.
BEGIN
15 Min
Press the SLEEP button on the
remote control and the SLEEP timer
display will appear on the screen.
30 Min
Press the SLEEP button repeatedly
to pick the amount of time (15, 30, 45,
60, 90, 120, 180 or 240 minutes) before
the TV will turn itself off.
45 Min
An on-screen count down will appear
during the last minute before the TV
shuts itself off.
60 Min
VOL
SMART HELP
2
The on-screen menu will time
out and disappear from the screen
when you finish, or you can press the
STATUS/EXIT button to clear the menu
from the screen.
1
90 Min
120 Min
During the last minute of a
SLEEP timer setting, an on-
screen count down will be dis-
played. Pressing any button
during the last minute will
cancel the SLEEP timer.
During the last 10 seconds of
a SLEEP timer setting, an
on-screen display will read
GOOD BYE.
180 Min
Good Bye
9 Sec
45 Sec
240 Min
30
SETTING THE AUTO PICTURE CONTROL
hether you’re watching a movie
Wor a sporting event, your TV has
automatic video control settings
matched for your current program
source or content. The Auto Picture fea-
ture quickly resets your TV’s video con-
trols for a number of different types of
programs and viewing conditions you
may have in your home. Each Auto
Picture setting is preset at the factory to
automatically adjust the TV’s
Brightness, Color, Picture, Sharpness,
Tint, Color Temperature, DNR and
Contrast+ levels.
Personal
BEGIN
Movies
Press the AUTO PICTURE button
on the remote control. The current Auto
Picture setting will appear in the middle
of the screen.
2
1
Press the AUTO PICTURE button
repeatedly to select either PERSONAL,
MOVIES, SPORTS, WEAK SIGNAL,
or MULTI MEDIA picture settings.
Sports
Note: The PERSONAL setting is the
setting that you setup using the PIC-
TURE options within the on-screen
menu. This is the only Auto Picture set-
ting that can be changed. All other set-
tings are setup at the factory during the
time of production.
VOL
MOVIES - Preset picture options for
Weak Signal
watching Video Tapes, or DVDs.
SPORTS - Preset picture options for
watching sporting events.
WEAK SIGNAL - Preset picture
options for watching programs where
the reception is not at its best.
MULTI MEDIA - Preset picture
options for use with video gaming.
Multi Media
31
SETTING THE AUTO SOUND CONTROL
he Auto Sound feature allows the
Tlistener to select between four dif-
ferent factory set sound options.
Personal (which can be set by the user),
Theatre (for movie viewing), Music (for
musical type programming) and Voice
(when the program is mainly dialogue).
These setting affect the Sound menu’s
Bass, Treble, AVL, and Incredible
Surround controls
To select any of the options follow the
directions below.
Personal
BEGIN
Press the AUTO SOUND button on
the remote control. The current Auto
Sound setting will appear in the middle of
the screen.
Theatre
Music
Voice
Press the AUTO SOUND button
repeatedly to toggle between the four
settings.
2
1
Note: Only the PERSONAL control
can be changed by the viewer. This
changes the settings in the main on-
screen menu's sound controls.
THEATRE - Preset sound options for
watching movies.
VOL
MUSIC - Preset sound options for musi-
cal programming where there is little
dialogue.
VOICE - Preset sound options for pro-
gramming where heavy dialogue is pres-
ent.
32
USING THE QUADRA SURF BUTTONS
“list” or series of previously
Aviewed channels can be selected
with the Quadra SURF (colored) but-
tons on your remote control. With this
feature you can easily switch between
different TV programs that currently
interest you. The Quadra Surf control
allows you set up four different person-
al Surf lists using the colored buttons
(on the remote control), each holding
up to ten channels in its quick view-
ing“list.”
12
12
Select List!
BEGIN
4
3
Press the CHANNEL (+) or (–) but-
tons (or the NUMBER buttons) to select
a channel to add to one of the SURF lists.
12
Added!
Press the SMILEY
the remote control to ADD the channel to
one of the SURF lists.
button on
5
1
2
6
Press the corresponding COL-
ORED (Red, Green, Yellow or Blue)
button to add the channel to that button’s
Surf list. (Up to ten channels per button
can be stored.)
VOL
12
Remove Item? - Press
Repeat steps 1 through 3 to add addi-
tional channels (up to 10) to each of the
the SURF lists.
To remove a channel from one of the
SURF lists;
Press the COLORED Quadra
Surf button until the desired channel
appears. The screen will display the
channel number with a colored
“Smiley” face to indicate the Colored
button it relates to.
12
While the “Smiley” face channel
indicator is displayed, press the
FROWNIE
screen will read, “Remove item? -
Press .”
face button. The
A/CH BUTTON
Your remote also has
an A/CH (Alternate
Channel) button.
Pressing this button
will toggle between
the Current and one
previously selected
channel.
5
Press the FROWNIE
face but-
ton again to confirm your decision to
22
1
remove the channel from the Surf list.
Repeat steps 4-6 to remove other chan-
nels from Surf lists.
33
USING THE QUADRA SURF BUTTONS
he Quadra Surf buttons on your
Tremote control allow you to store up
to 10 channels per button (40 total).
This is a great feature if you want to
store all your favorite Sports channels,
Movie channels, or News channels in
one surf list. Family members can have
there own favorite list of channels. You
can even program the external A/V
Input jacks (Front channel) for one of
the buttons making it a “source” but-
ton for your external accessory devices.
12
12
Assuming channels have now been
added to the four Quadra Surf lists (the
four colored buttons on the remote, see
the previous page), let’s review how the
feature works.
18
22
3
Press one of the pre-programmed
COLORED buttons on the remote
(Red, Green, Yellow or Blue). The screen
will display a smiley face with the first
programmed channel for that surf list.
2
1
28
35
5
While the colored “smiley” face still
appears on the screen, press the same
COLORED button on the remote to
tune the second channel programmed for
that specific surf list.
39
41
VOL
Repeatedly pressing the same COL-
ORED button while the “smiley” face
appears will tune all the programmed
channels for that specific surf list. After
the last channel is tuned, pressing the
COLORED button again will return you
to the first channel in the list.
56
99
If the “smiley” face disappears from the
screen and the same COLORED button is
pressed, the surf channels will be dis-
played starting with the FIRST pro-
grammed channel again.
5
12
Remove Item? - Press
Repeat steps 1-3 for the other three
COLORED buttons (Surf lists) if desired.
Any time the “smiley” face appears
with the channel number, pressing the
“frownie” face button will allow you
to remove it from the list (see the previ-
ous page for more details).
34
TROUBLESHOOTING TIPS
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game could leave an image permanently on
the picture tube. When not in use, turn the video source OFF. Regularly alternate the
use of such video sources with normal TV viewing.
lease make these simple
Pchecks before calling for
service. These tips can save you
time and money since charges for
TV installation and adjustment of
customer controls are not cov-
ered under your warranty.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.
No Power
No Picture
• Check antenna connections. Are they properly secured to the TV's 75Ω plug?
• Check the TUNER MODE control for CABLE or ANTENNA setting.
• Check Audio/Video Input jack connections if using a VCR or other external device.
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
No Sound
• Check Audio/Video Input jack connections if using a VCR or other external device.
• Turn the TV OFF for several seconds, then power the set back ON.
• Unplug the TV for FIVE minutes. Plug the TV back into the AC outlet and power the
TV ON. This should correct the problem.
Unusual Screen
Coloring
• Check the Picture menu options for proper control settings.
• Pressthe Auto Picture button on the remote to change the color options. If the color
resets itself, readjust the Picture menu option control.
• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
• Clean the remote and the remote sensor window on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.
• Check to be sure TV outlet is not on a wall switch.
Remote Does Not
Work
• Repeat channel selection.
• Add desired channel numbers (CHANNEL control) into TV memory.
• Check to be sure the TUNER MODE control is set to the CABLE option.
TV Displays Wrong
Channel or No
Channels Above 13
Cleaning and Care
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean
dry cloth to dry the wiped surfaces.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
35
GLOSSARY TO TELEVISION TERMS
Auto Programming • The procedure of adding or deleting
Quadra Surf • The feature that allows the programming of four
separate Surf lists holding up to 10 channels each.
channel numbers into the Television’s memory circuits. In this
way the Television “remembers’’ only the locally available or
desired channel numbers and skips over any unwanted channel
numbers.
Remote Sensor Window • A window or opening found on the
Television control panel through which infrared remote control
command signals are received.
Coaxial Cable • A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.
Status/Exit • Allows the user to quickly confirm what channel
number is currently being viewed. Status can also be used to
clear the Television of on screen displays or information (rather
than waiting for the displays to “time out” or automatically dis-
appear from the screen).
Closed Caption • Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses on-
screen "text boxes" to show dialogue and conversations while
the TV program is in progress.
Surf • The action of scanning specific channel in a limited
channel list.
Twin Lead Wire • The more commonly used name for the two
strand 300 Ohm antenna wire used with many indoor and out-
door antenna systems. In many cases this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent
Televisions and VCRs.
Front or Side Audio/Video Inputs • Located on the front or
side of the TV these connectors (phono type plug) are used for
the input of audio and video signals. Designed for easy use
with VCRs or cameras.
On Screen Displays (OSD) • Refers to the wording or mes-
sages generated by the television (or VCR) to help the user with
specific feature controls (color adjustment, programming, etc.).
Tuner Mode • Feature control settings made by the TV.
Designed for first time set up and use. Settings for signal con-
nections (antenna or cable TV), plus channel program memory
are held in the TV's memory (even if the set is unplugged and
moved to a new location.)
Menu • An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.
36
INDEX
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Dynamic Noise Reduction (DNR) Control . . . . . . . . . . . . . . .15
Antenna TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Factory Service Information . . . . . . . . . . . . . . . . . . . . . . . .38-39
Auto Lock
Front/Side A/V Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Block All Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Block Channels Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Clear All Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Explanation of Auto Lock . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Remote Control Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . .8
Movie Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TV Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Auto Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Stereo/Mono Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Auto Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Surf/Quadra Surf Controls . . . . . . . . . . . . . . . . . . . . . . . . .33-34
AVL Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Timer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Bass Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Treble Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Cable TV Connection (Basic Connection) . . . . . . . . . . . . . . . . .5 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Channel Edit Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Closed Caption Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 VCR Connection (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Color Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Welcome/Registration Information . . . . . . . . . . . . . . . . . . . . . .2
Contrast + Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
37
FACTORY SERVICE LOCATIONS
Detroit/Toledo
•
Cleveland/
•
•
N Ohio •
•
Chicago
★ Columbus
•
San Francisco/Metro Area
★ Los Angeles
Charlotte
★
•
★ Pittsburgh/WV Area
Knoxville/E Tennessee
•
•
•
Philadelphia/S New Jersey
★ Wash/Balt
Atlanta/N Georgia
• Dallas
★ Orlando
•
Houston
Tampa/W Florida
★ Ft. Myers/SW Florida
•
★ Indicates In-Home Service Only
★ Miami/SE Florida
• Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For
Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le produit est
sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-
tactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame
al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-363-7278 (English speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-363-7278
En el Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (francófono)
1-800-363-7278 (anglófono)
EL4482-3 Rev. CC
3135 015 07541
MAC2929 Rev. BB - 1/1/2001
38
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF
MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
200 N. Cobb Pkwy., Suite 120
Marietta, GA 30062
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North
Tampa, FL 33619
800-442-2027
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
6700 D Papermill Rd.
Knoxville, TN 37919
800-821-1767
SAN FRANCISCO
DALLAS
PHILADELPHIA
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
Philips Factory Service
415 N. Main Street, #107
Euless, TX 76040
800-952-3254
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
MAC2929 1/1/2001
39
LIMITED WARRANTY
COLOR TELEVISION
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
WHAT IS COVERED?
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement
or repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replace-
ment or repair of all parts, and for all labor charges.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or author-
ized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
1-800-894-5463
1-800-363-7278
•
•
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
(In Canada, this warranty is given in lieu of all other warranties. No
other warranties are expressed or implied, including any implied war-
ranties of merchantability or fitness for a particular purpose. Philips is
not liable under any circumstances for any direct, indirect, special, inci-
dental or consequential damages, howsoever incurred, even if notified
of the possibility of such damages.)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or conse-
quential damages, so the above exclusion may not apply to you.
This includes, but is not limited to, prerecorded material, whether
copyrighted or not copyrighted.)
REMEMBER...
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
• a product used for commercial or institutional purposes.
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distrib-
ute the product, the local Philips service organization will attempt to
provide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MODEL # ________________________________________________
SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consumer Electronics Company, P.O. Box 2976, Longview, Texas 75606,
(903) 242-4800
Printed in U.S.A.
40
|