Color TV
Directions for Use
Important!
Return your
Warranty
Registration Card
within 10 days.
See why inside.
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Model No.:
Serial No.:
Thank you for making Philips a part of your home!
3121 235 20422
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
16. Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appli-
ance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
7. Do not block any of the ventilation openings. Install in accordance
E. The appliance has been dropped, or the enclosure damaged.
with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design.
• Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ulti-
mately overturn the product.
• Also, do not endanger yourself, or children, by placing electron-
ic equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product dam-
age and/or personal injury.
9. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third ground-
ing prong. The wide blade or third prong are provided for your
safety. When the provided plug does not fit into your outlet, con-
sult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
18. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
11. Only use attachments/accessories specified by the manufacturer.
power lines.
12.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
aratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
20. Outdoor Antenna Grounding - If an outside antenna is connect-
ed to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static
charges.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15. This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
21. Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
3
CONTENTS
INTRODUCTION
REMOTE CONTROL RELATED FEATURES
How to set the Sleep Timer Control . . . . . . . . . . . .28
Using the AutoPicture™ Control . . . . . . . . . . . . . . . . . . . . .29
Using the AutoSound™ Control . . . . . . . . . . . . . . . . . . . . . .30
Using the QuadraSurf™ Control (Alternate Channel) . .31-32
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . . .2
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AUDIO/VIDEO INPUT JACKS
Jack Panel descriptions and required cables . . . . . . .6
Using the AV 1 Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using the CVI Jacks (Component Video Input) . . . . . . . . . . .8
Using the AV Output Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .9
GENERAL INFORMATION
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Glossary of terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . . .37-38
Notes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
PICTURE MENU CONTROLS
Adjusting the Brightness Control . . . . . . . . . . . . . . .10
Adjusting the Color Control . . . . . . . . . . . . . . . . . . . . . . . . .10
Adjusting the Picture Control . . . . . . . . . . . . . . . . . . . . . . . .10
Adjusting the Sharpness Control . . . . . . . . . . . . . . . . . . . . .10
Adjusting the Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . .10
How to set the Color Temp Control . . . . . . . . . . . . . . . . . . .10
How to use the DNR (Noise Reduction) Control . . . . . . . . .11
How to use the Contrast+ (Black Stretch) Control . . . . . . .12
QUICK USE AND SETUP GUIDE
Refer to the simple Quick Use and
Setup Guide (supplied with your TV)
for details on the following:
Color TV
Quick Use and Setup Guide
CONTENTS
IMPORTANT
NOTE: This owner's manual is used with several
different television models. Not all features (and
drawings) discussed in this manual will necessar-
ily match those found with your television set.
This is normal and does not require that you con-
tact your dealer or request service.
Important Notice/Warning
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.1
How to Use the Installation Features
.
.
.
.
.
.
.
.
.
.3-4
Making Basic TV Connections
Basic Cable TV Connections
Using the Language Control
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.3
.3
.4
.4
.4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.1
.1
.2
.2
.2
Setting the Tuner Mode Control
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Basic Antenna TV Connections
How to Automatically Program Channels
How to Add and Delete Channels
Basic TV Operation
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
W
ARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
Remote Battery Installation
How to set the AutoChron™ Feature (Clock)
How to Name (Label) Channels
Remote Control Button Descriptions
.
.
.
.
.
.
.
.
.
.
.
BASIC TV CONNECTIONS
Direct Cable Connection:
CABLE TV
our Cable TV input into your home may be
a
single (75 ohm)
Ycable or
a
converter box installation. In either case, the con-
nection to the TV is very easy. Follow the steps below to connect
your cable signal to your new television.
Cable signal coming from
Cable Company (Round
75Ω coaxial cable)
AC Power
Wall Outlet
2
b
If your cable signal comes directly from
cable use the following steps:
a
round 75Ω coaxial
P
Power Plug
from back of TV
1
Connect the open end of the round Cable Company sup-
plied cable to the 75Ω input on the TV Screw it down finger
SOUND MENU CONTROLS
.
• Basic TV connections
1
2
tight.
Plug the television in to the wall outlet and turn the TV on.
Refer to the AUTOPROGRAM feature to program all the
available channels on your cable signal.
Jack Panel Back of TV
Cable Box Connection:
If your cable signal comes from
steps:
a
cable box, use the following
Jack Panel Back
of Cable Box
3
4
Connect the open end of the round Cable Company sup-
plied cable to the cable signal IN(put) plug on the back of
the Cable Box.
3
INPUT
OUTPUT
Using separate round coaxial cable, connect one end to the
a
Adjusting the Treble Control . . . . . . . . . . . . . . . . . .13
Adjusting the Bass Control . . . . . . . . . . . . . . . . . . . . . . . . . .13
Adjusting the Balance Control . . . . . . . . . . . . . . . . . . . . . . .13
How to use the AVL control . . . . . . . . . . . . . . . . . . . . . . . . .14
How to use the Incredible Surround Control . . . . . . . . . . . .15
OUT(put) plug on the back of the Cable Box.
AC Power
• Basic TV and remote-control operation
• Onscreen menu navigation
4
5
6
Wall Outlet
Round 75Ω
Coaxial Cable
Connect the other end of the round coaxial cable to the
75Ω input on the back of the television. Screw it down finger
tight.
6
Plug the television in to the wall outlet and turn the TV on.
Refer to the TUNER and AUTOPROGRAM features on page
Cable Signal IN from
the Cable Company
Jack Panel
Back of TV
b
P
3
of this Quick Use Guide. TUNER should be set to the
5
CABLE option. AUTOPROGRAM can be set to program all
the available channels on your cable signal into the televi-
sion’s memory.
Power Plug
from back of TV
ANTENNA TV
Antenna Connection:
combination antenna receives normal broadcast chan-
Outdoor or Indoor Antenna
(Combination VHF/UHF)
The combination antenna receives normal
Anels (VHF 2–13 and UHF 14–69). our connection is
Y
AC Power
all Outlet
easy because there is only one 75Ω (ohm) antenna plug on
Jack Panel
Back of TV
W
the back of your TV,
and that’s
where the antenna goes.
broadcast channels 2-13 (VHF) and 14-69 (UHF).
If your antenna has round cable (75 ohm) on the end,
a
300 to 75-ohm
Adapter
then you're ready to connect it to the TV
.
1
If your antenna has flat, twin-lead wire (300 ohm), you
first need to attach the antenna wires to the screws on
300- to 75-ohm adapter.
1
3
a
b
2
P
Push the round end of the adapter (or antenna) onto the
75Ω (ohm) plug on the back of the TV If the round end of
• How to use the Installation features
T
win
.
2
3
Lead Wire
the antenna wire is threaded, screw it down finger tight.
Plug the television in to the wall outlet and turn the TV
on. Refer to the TUNER and AUTOPROGRAM features on
Power Plug
from back of TV
page
3
of this Quick Use Guide. TUNER should be set to the
Round 75Ω
ANTENNA option. AUTOPROGRAM can be set to program
all the available channels on your cable signal into the televi-
sion’s memory.
Coaxial Cable
from Antenna
3121 233 42241
Language, Tuner Mode, Auto Program,
and Channel Edit
How to set the TV to receive Secondary Audio
Programming, also known as the SAP Control . . . . . . . . . .16
How to set the Stereo Control . . . . . . . . . . . . . . . . . . . . . . .17
FEATURE MENU CONTROLS
How to use the Timer controls:
NOTE: It is possible that this owner's manual may
be used with several different television models. Not
all features (and drawings) discussed in this manual
will necessarily match those found with your televi-
sion system. This is normal and does not require you
contacting your dealer or requesting service.
Setting the TV Clock using the Time Control . . . . . . . . . .18
Setting a time for the TV to turn itself on using
the Start Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Setting a time for the TV to turn itself off using
the Stop Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Setting the TV to start on a specific channel using
the Channel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
How to activate the controls using the Activate Control . .18
How to view the time using the Display Control . . . . . . .18
How to use the AutoLock™ Controls:
Understanding the AutoLock™ Feature . . . . . . . . . . . . . .19
Setting up an AutoLock™ Access Code . . . . . . . . . . . . . .20
How to Block All Channels at the same time . . . . . . . . . .21
How to Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .22
How to Clear All blocked channels at the same time . . . .23
Blocking programming based on Movie Ratings . . . . . . .24
Blocking programming based on TV Ratings . . . . . . . . . .25
AutoLock™ Blocking Options . . . . . . . . . . . . . . . . . . . . .26
How to use the Closed Captioning Control . . . . . . . . . . . . .27
Auto Lock™, Auto Picture™, Auto Sound™, QuadraSurf™
are all registered trademarks of Philips Consumer Electronics Company.
Copyright © 2002 All rights reserved.
4
FEATURES
Audio/Video Jack Panel allows direct connections with VCRs,
DVDs, or other devices, providing quality TV picture and sound
playback.
Items Included with This TV
As you unpack your TV, please note that this Directions
for Use manual contains safety-tip information and
Factory Service Center locations, as well as a Warranty
Registration Card, remote control, and batteries for use
with the remote control.
Audio Volume Leveler (AVL) Control keeps the TV sound at
an even level. Peaks and valleys that occur during program
changes or commercial breaks are reduced, making for a more
consistent, comfortable sound.
Please take a few minutes to complete your registration
card. The serial number for the TV is on the rear of the set.
Refer to the back of this manual for instructions in the
cleaning and care of the TV.
AutoLock™ allows you to block the viewing of certain chan-
nels or programs with certain ratings if you do not want your
children to view inappropriate materials.
Auto Programming scans (when activated) for all available
channels from regular antenna or cable signals and stores only
active broadcast stations in the TV’s memory.
END-OF-LIFE DISPOSAL
Your new television and its packing contain materials that
can be recycled and reused. Specialized companies can recy-
cle your product to increase the amount of reusable materials
and minimize the amounts that need to be properly disposed.
AutoPicture™ allows you to change the picture settings (color,
tint, contrast, etc.) for various types of programming, such as
sports, movies, multimedia (games), or weak signals with the
push of one button.
Your product also uses batteries that should not be thrown
away when depleted, but should be handed in and disposed of
as small chemical waste.
AutoSound™ allows you to select from three factory-set con-
trols and a personal control that you set according to your own
preferences through the onscreen Sound menu. The three facto-
ry-set controls (Voice, Music, and Theatre) enable you to tailor
the TV sound so as to enhance the particular programming you
are watching.
When you replace your existing equipment, please find out
about the local regulations regarding disposal of your old tel-
evision, batteries, and packing materials.
Channel Edit allows you to add or delete channels from the list
stored in the TV’s memory. Channel Edit makes it easy to limit
or expand the number of channels that are available to you when
you press the Channel (+) or (–) buttons on your remote control.
Battery Usage CAUTION:
To prevent battery leakage tha may result in bodily injury,
property damage, or damage to the unit:
• Install all batteries correctly, with + and - aligned as
marked on the unit.
Closed Captioning allows the viewer to read TV program dia-
logue or voice conversations as onscreen text.
• Do not mix battereis (old and new or carbon and alkaline,
etc.).
Infrared Remote Control works your TV and other remote-
controlled devices, such as VCRs, DVD players, cable convert-
ers, and satellite receivers.
• Remove batteries when the unit is not used for a long time.
Onscreen Menu shows helpful messages and instructions for
setting TV feature controls (can be viewed in English, French, or
Spanish).
As an Energy Star® Partner, Philips Consumer
Electronics has determined this product meets
the Energy Star® guidelines for energy efficien-
cy. Energy Star® is a U.S. registered mark. Using products
with the Energy Star® label can save energy. Saving energy
reduces air pollution and lowers utility bills.
Sleep Timer automatically turns the TV OFF after a set amount
of time that you choose.
Standard Broadcast (VHF/UHF) or Cable TV (CATV) chan-
nel capability allows for viewing by antenna or cable.
Stereo capability, including a built-in audio amplifier and twin-
speaker system, allows for the reception of TV programs broad-
cast in stereo sound.
Active Control, APAC, AutoPicture, AutoSound, AutoChron,
and Incredible Surround are trademarks of Philips Consumer
Electronics Company. Copyright 2001 Philips Consumer
Electronics.
QuadraSurf™ Buttons allow you to store up to 40 of your
favorite channels for easy and quick access using the four col-
ored buttons. Each of the four colored buttons will hold 10 chan-
nels or the A/V Input channels. These buttons are great for stor-
ing your favorite Sports, Movie, News or Children’s programs.
*Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Timer allows you to set your TV to turn itself ON and OFF
once or daily like an alarm clock.
5
JACK PANEL DESCRIPTIONS AND REQUIRED CABLES
he television is equipped with external
Tinput and output jacks for use with optional
accessory devices such as VCRs, DVD Player,
Gaming Units, Video Cameras, etc. The follow-
ing gives a brief explanation of the different
types of jacks available and the type of cables
needed to make connections.
75 ⍀
75Ω RF - Cable/Antenna Input connec-
tion jack. Located on the back of the tel-
evision.
1
L
AV in - Audio/Video connection jacks.
Located on the back of the television.
Along with Component Video Inputs.
AUDIO
R
1
2
CVI - Component Video Input connec-
tion jacks. Located on the back of the
television.
AV out
CVI
AV in
3
4
AV out - Audio/Video Output connec-
tion jacks. Located on the back of the
television.
2
4 3
Cable Descriptions:
A 75-ohm coaxial cable connects signals from an antenna or a cable TV company to the antenna jack on the
back of the TV. Coaxial cables use “F” connectors.
A two-way signal splitter enables you to take a single antenna or cable TV signal and supply it to two differ-
ent inputs.
A 300- to 75-ohm twin-lead adapter accepts the antenna cables (called twin-lead wires) from an antenna,
allowing you to connect the antenna signal to the TV.
Video and audio cables with standard RCA (phono) connectors connect the video and audio jacks of acces-
sory devices such as VCRs and DVD players to the jacks on the TV.
Yellow - Video
These connectors are usually color coded. The jacks on your TV are also color coded to match the colors of
the connectors. Yellow for video (composite) and Red and White for the right and left audio channels. The
video cables used to connect component video or RGB (high-resolution) jacks are color coded red, green, and
blue.
White - Audio Left
Red - Audio Right
6
USING THE AV IN (INPUT) JACKS
he TV’s audio/video input jacks are for
NOTE: Repeatedly pressing the AV button on the remote control will toggle the
picture source from the current channel, the AV channel, then the CVI channel.
Tdirect picture and sound connections
between the TV and a VCR (or similar device)
that has audio/video output jacks. Follow the
easy steps below to connect your accessory
device to the AV in Jacks located on the back of
the TV.
BACK OF TV
Connect the VIDEO (yellow) cable to
the VIDEO AV in jack on the back of
the TV.
1
1
2
3
4
5
6
2
24
75 ⍀
Connect the AUDIO (red and white)
CVI
cables to the AUDIO (left and right)
AV in jacks on the rear of the TV.
L
AUDIO
R
AV
Connect the VIDEO (yellow) cable to
the VIDEO OUT jack on the back of
the VCR.
AV out
AV in
AUDIO IN
(RED/WHITE)
Connect the AUDIO (red and white)
cables to the AUDIO (left and right)
OUT jacks on the rear of the VCR.
VIDEO IN
(YELLOW)
Turn the VCR (accessory device) and
the TV ON.
L
R
S-VIDEO
UT
VIDEO
OUT
ANT/CABLE
OUT
AUDIO OUT
Press the AV button on the remote
control to select the AV channel. AV
will appear in the upper left corner on
the TV screen.
BACK OF VCR
3
4
6
VOL
With the VCR (or accessory device)
ON and a prerecorded tape (CD, DVD,
etc.) inserted, press the PLAY button
to view the tape on the television.
7
VCR
7
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
5
c
CHECK IT OUT
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AV, CVI Input
Jack connections.
7
USING THE CVI (COMPONENT VIDEO INPUT) JACKS
omponent Video inputs provide for the
Chighest possible color and picture resolu-
tion in the playback of digital signal source
material, such as with DVD players. The
color difference signals (Pb, Pr) and the lumi-
nance (Y) signal are connected and received
separately, which allows for improved color
bandwidth information (not possible when
using composite video or S-Video connec-
tions).
The CVI connection will be dominate
over the AV in Video Input. When a
Component Video Device is connected
as described, it is best not to have a
video signal connected to the AV in
Video Input jack.
BACK OF TV
1
2
75 ⍀
CVI
Connect the Component (Y, Pb, Pr)
L
Video OUT jacks from the DVD play-
1
IO
R
er (or similar device) to the (Y, Pb, Pr)
in(put) jacks on the TV. When using
the Component Video Inputs, it is best
not to connect a signal to the AV in
Video Jack.
AV o
CVI
AV in
4
AUDIO IN
Connect the red and white AUDIO
(RED/WHITE)
COMPONENT
VIDEO
CABLES to the Audio (left and right)
CABLES
2
output jacks on the rear of the accesso-
ry device to the Audio (L and R) AV in
Input Jacks on the TV.
COMP VIDEO
S-VIDEO
OUT
VIDEO
AUDIO
Y
Pb
R
OUT
L
OUT
Pr
Turn the TV and the DVD (or digital
accessory device) ON.
3
Press the AV button or the CH +, –
VOL
buttons to scroll the available channels
4
4
until CVI appears in the upper left cor-
ner of the TV screen.
Insert a DVD disc into the DVD player
and press the PLAY ᮣ button on the
DVD Player.
5
ACCESSORY DEVICE
3
5
EQUIPPED WITH CONPONENT
VIDEO OUTPUTS.
HELPFUL HINT
The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi-
nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions
and connection details.
8
USING THE AV OUT(PUT) JACKS
he AV (Audio/Video) out jacks are great
Tfor recording with a VCR or used to con-
nect an external audio system for better sound
reproduction.
JACK PANEL
Located on the back of the TV
ANT 75‰
Monitor out
AV2 in
AV1 in
For Audio System Connection:
VIDEO
Y
L/Mono
AUDIO
R
Connect one end of the R(ight) and
Pb
L(eft) AUDIO (Monitor Out) jacks on
the TV to the R and L audio input jacks
on your amplifier or sound system. Set
the audio system’s volume to a normal
listening level.
S-VIDEO
1
CONENT VIDEO INPUT
1
AUDIO CABLES
(Red & White)
AV OUT
AUDIO L(eft) and R(ight)
Turn the TV and audio system ON.
You can now adjust the sound level
coming from the audio system with the
VOLUME (+) or (–) button on the TV
or remote control.
R
L
2
T
AUX/TV INPU
T
PHONO INPU
2
AUDIO SYSTEM
with AUDIO INPUTS
For Second VCR Connection:
JACK PANEL
Located on the back of the TV
AV OUT
VIDEO &AUDIO
L(eft) and R(ight)
NOTE: Refer to page 7 for the proper
hookup of the first VCR. Follow the instruc-
tions on how to tune to the AV channel to
view a pre-recorded tape.
75 ⍀
3
The following steps allow you to connect a
second VCR to record the program while
your watching it.
UDIO
AV out
CVI
AV in
Connect one end of the yellow Video
Cable to the AV out VIDEO plug.
AUDIO CABLES
(Red & White)
VIDEO CABLE
(Yellow)
3
Connect the other end to the VIDEO
IN plug on the second VCR.
4
ANTENNA
IN
OUT
AUDIO
IN
OUT
VIDEO
IN
ANTENNA
IN
OUT
VIDEO
IN
OUT
AUDIO
IN
Connect one end of the red and white
Audio cable from the AV out AUDIO
L and R plugs on the TV to the AUDIO
IN plugs on the VCR.
R
L
ANTENNA
OUT
L
R
ANTENNA
OUT
4
5
Turn the Second VCR ON, insert a
black VHS tape and it’s ready to record
what’s being viewed on the TV screen.
5
FIRST VCR (accessory device)
(Hookup from Page 7)
SECOND VCR
9
ADJUSTING THE PICTURE CONTROLS
o adjust your TV picture controls, select a
Tchannel and follow these steps.
Press the MENU button on the remote
control to show the onscreen menu. PIC-
TURE will be highlighted.
1
2
Press the CURSOR RIGHT button and
the menu will shift to the left. BRIGHT-
NESS will be highlighted and an adjust-
ment bar will be shown to the right.
Use the CURSOR LEFT or CURSOR
RIGHT button to adjust the BRIGHT-
NESS level of the picture.
3
4
After adjusting the BRIGHTNESS con-
trol, press the CURSOR DOWN button
to select another picture adjustment:
COLOR, PICTURE, SHARPNESS,
TINT, OR COLOR TEMP. Press the
CURSOR LEFT or CURSOR RIGHT
button to adjust the selected control.
5
1
NOTE: The menu will show only five items at a
time, so you will need to continue scrolling with
the CURSOR DOWN button to adjust the TINT
and COLOR TEMP.
VOL
2,3
4
Press the STATUS/EXIT button to
remove the menu from the screen.
5
HELPFUL HINT
Remember, when the bar scale is centered
, the control settings are at
normal, mid-range levels. Picture adjust-
ments are described here.
NOTE: The SHARPNESS and TINT
Controls will not be available for adjust-
ments when tuned to the CVI Inputs (CVI
Channel).
BRIGHTNESS – adds or subtracts light
from the darkest part of the picture.
COLOR – adds or eliminates color.
PICTURE – improves the detail of the light-
NOTE: AutoPicture™ setting are
also available for specific types of
programming such as Movies,
Sports, Weak Signals, and
est parts of the picture.
SHARPNESS – improves the detail in the
picture.
TINT – adjusts the picture to obtain natural
skin tones.
MultiMedia (i.e., gaming) use.
Please see page 29 for more details.
COLOR TEMP offers NORMAL, COOL,
or WARM picture preferences.
NORMAL – keeps whites, white.
COOL – makes whites, bluish.
WARM – makes whites, reddish.
10
HOW TO USE THE DNR (DIGITAL NOISE REDUCTION) CONTROL
or reasons such as poor cable reception,
Fthe picture can sometimes appear slightly
“speckled” (or has signal noise shown in the
picture). The DNR (Dynamic Noise Reduction)
control can help eliminate this type of interfer-
ence and improve the quality of the picture.
Press the MENU button on the remote
to display the on-screen menu.
1
Press the CURSOR UP or CURSOR
DOWN button until the word PIC-
TURE is highlighted.
2
Press the CURSOR RIGHT button
to display the PICTURE menu fea-
tures.
3
4
Press the CURSOR UP or CURSOR
DOWN button to scroll the Picture
menu features until the word DNR is
highlighted.
2,4
1
6
Press the CURSOR RIGHT button
turn the DNR feature ON or OFF.
5
6
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
VOL
3,5
2,4
HELPFUL HINT
“Noise” Reduction is a video adjustment fea-
ture that affects the picture quality of the TV
not the sound.
NOTE: If the Sharpness control setting is
under 50 (see Picture Adjustments on the
previous page), the DNR control will have
little or no effect to the TV’s picture when
switched to ON.
11
HOW TO USE THE CONTRAST + (BLACK STRETCH) CONTROL
he Contrast + (Black Stretch) control
Thelps to “sharpen” the picture quality.
The black portions of the picture become
richer in darkness and the whites become
brighter.
Press the MENU button on the remote
to display the on-screen menu.
1
Press the CURSOR UP or CURSOR
DOWN button until the word PIC-
TURE is highlighted.
2
Press the CURSOR RIGHT button
to display the PICTURE menu fea-
tures.
3
4
Press the CURSOR UP or CURSOR
DOWN button to scroll the Picture
menu features until the word CON-
TRAST + is highlighted.
2,4
1
6
Press the CURSOR RIGHT button
turn the CONTRAST + feature ON or
5
6
OFF.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
VOL
3,5
2,4
12
ADJUSTING THE TREBLE, BASS, AND BALANCE CONTROLS
esides the normal volume level control,
Byour TV also has individual sound-adjust-
ment controls. The TREBLE (high frequen-
cy), BASS (low frequency), and Speaker BAL-
ANCE may all be used to adjust the sound
playback of TV programs.
Press the MENU button on the remote
to display the on-screen menu.
1
Press the CURSOR UP or CURSOR
DOWN button until the word SOUND
is highlighted.
2
Press the CURSOR RIGHT button
to display the SOUND menu features.
3
4
Press the CURSOR UP or CURSOR
DOWN button to scroll the Sound
menu features until the words TRE-
BLE, BASS or BALANCE are high-
2,4
6
1
5
lighted.
Press the CURSOR RIGHT or
LEFT button to adjust the Treble,
Bass or Balance controls.
5
6
VOL
3,5
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
2,4
HELPFUL HINT
Remember, when the bar scale is centered,
speaker BALANCE is centered between the
TV’s left and right side speakers.
13
HOW TO USE THE AVL (AUTOMATIC VOLUME LEVELER) CONTROL
n most cases, the volume levels coming
Ifrom broadcast programming or commer-
cials are never the same. With the AVL
(Audio Volume Leveler) control turned ON,
you can have the TV level out sound that is
being heard. This makes for a more consis-
tent sound by reducing the peaks and valleys
that occur during program changes or com-
mercial breaks. To turn the AVL ON, follow
these steps.
Press the MENU button on the
remote control to show the onscreen
menu.
1
2
3
Press the CURSOR DOWN button
once to highlight SOUND.
Press the CURSOR RIGHT button
and the menu will shift to the left.
TREBLE will be highlighted and an
adjustment bar will be shown to the
right.
1
5
6
Press the CURSOR DOWN button
repeatedly until AVL is highlighted.
4
Press the CURSOR RIGHT or CUR-
SOR LEFT button to toggle AVL ON
or OFF.
5
VOL
3,5
2,4
Press the STATUS/EXIT button to
remove the menu from the screen.
6
14
HOW TO USE THE INCREDIBLE SURROUND CONTROL
he Incredible Surround feature adds
Tgreater depth and dimension to both mon-
aural (MONO) and stereo TV sound. With
the control set to INCR. SURROUND
(Incredible Surround), the TV’s speakers can
add even wider sound separation to normal
broadcasts.
Press the MENU button on the
remote control to show the onscreen
menu.
1
Press the CURSOR DOWN button
once to highlight SOUND.
2
Press the CURSOR RIGHT button
and the menu will shift to the left.
TREBLE will be highlighted and an
adjustment bar will be shown to the
right.
3
Press the CURSOR DOWN button
repeatedly until INCR. SURROUND is
highlighted. (Incredible Surround)
4
5
1
5
6
Press the CURSOR RIGHT or CUR-
SOR LEFT button to toggle the
INCR. SURROUND control settings.
If signal is Stereo: Select STEREO,
INCR. SURROUND, or DOLBY*
VIRTUAL.
VOL
3,5
If signal is MONO: Select MONO, or
SPATIAL.
2,4
Press the STATUS/EXIT button to
remove the menu from the screen.
6
HELPFUL HINT
If the TV signal is being received from a
mono source, pressing the INCR. SURR.
button will cause either MONO or SPATIAL
to appear on the the screen. If the TV signal
is being received from a stereo source and
the “Sound” control is set to Stereo, pressing
the INCR. SURR. button will toggle two
choices: STEREO and INCR. SUR-
ROUND.
SPATIAL – widens the “Mono” sound, sim-
ulating a broader, fuller sound.
INCR. SURROUND – widens the “Stereo”
sound, simulating a broader, fuller sound.
15
SETTING THE TV FOR SAP (SECONDARY AUDIO PROGRAMS)
SAP signal is an additional part of the
Astereo broadcast system. Sent as a third
audio channel, a SAP signal can be heard apart
from the current TV program sound. TV sta-
tions are free to use SAP for any number of pur-
poses.
If a SAP signal is not present with a selected
program, the SAP option cannot be selected.
Also, if SAP is selected on a channel (with SAP)
and you select another channel, when you
return to the original channel, SAP will be OFF.
You will have to reselect the SAP feature.
Press the MENU button on the remote
to display the on-screen menu.
1
Press the CURSOR UP or CURSOR
DOWN button until the word SOUND
is highlighted.
2
Press the CURSOR RIGHT button
to display the SOUND menu features.
3
Press the CURSOR UP or CURSOR
DOWN button to scroll the Sound
menu features until the word SAP is
highlighted.
4
2,4
1
6
Press the CURSOR RIGHT button
to turn the SAP control ON or OFF.
5
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
VOL
6
3,5
2,4
16
SETTING THE TV TO RECEIVE STEREO PROGRAMMING
ou can receive broadcast stereo TV pro-
Ygrams. The TV has both an amplifier and
twin speakers through which the stereo sound
can be heard.
Press the MENU button on the
remote control to show the onscreen
menu.
1
2
3
Press the CURSOR DOWN button
once to highlight SOUND.
Press the CURSOR RIGHT button
and the menu will shift to the left.
TREBLE will be highlighted and an
adjustment bar will be shown to the
right.
Press the CURSOR DOWN button
repeatedly until STEREO is highlight-
ed.
4
5
6
Press the CURSOR RIGHT button
to select STEREO or MONO.
1
6
Press the STATUS/EXIT button to
remove the menu from the screen.
VOL
3,5
HELPFUL HINT
Remember, if stereo is not present on a
selected show and the TV is placed in the
STEREO mode, the sound coming from the
set will remain monaural.
2,4
17
HOW TO USE THE TIMER CONTROLS
he Timer Controls allow you to use your TV
Tas an alarm clock if set to turn itself on and
off at a specific time. It also can be set to tune
to a specific channel at a specific time.
Press the CLOCK button on the
remote. The Timer menu will appear on
the screen.
1
2
Press the CURSOR UP or CURSOR
DOWN button to highlight one of the
Timer controls you wish to set (Time,
Start Time, Stop Time, Channels,
Activate, or Display)..
Press the CURSOR RIGHT button to
adjust the selected option.
3
TIME: Enter the current time with the
numbered buttons. Use the Cursor Right
button to move to the AM/PM area and
use the Cursor Left and Right buttons to
toggle AM or PM.
4
2
START TIME: Use the Numbered but-
tons to enter a start-up time for the TV
to turn on or tune a specific channel.
STOP TIME: Use the Numbered but-
tons to enter a time for the TV to shut
itself off.
3
1
2
CHANNEL: Use the Numbered buttons
or the CH + or – buttons to select a spe-
cific channel for the TV to tune to at the
specific Start Time.
ACTIVATE: Set the Timer to preform
it’s function ONCE or DAILY.
DISPLAY: Set to ON or OFF. When
ON, the time will be displayed ALL the
time the TV is ON. When OFF, the time
will only appear when the
STATUS/EXIT button is pressed.
When finished, press the
STATUS/EXIT button to remove the
menu from the TV screen.
4
18
UNDERSTANDING THE AUTOLOCK™ FEATURE
he AutoLock™ feature receives and
Tprocesses data sent by broadcasters or
other program providers that contain pro-
gram content advisories. When programmed
by the viewer, a TV with AutoLock™ can
respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence,
sexual situations, etc.). This is a great feature
to censor the type of programming children
may watch.
In the AutoLock™ section, you’ll learn how
to block channels and programming that is
not rated, is unrated, or has no rating. You
will also find out how to turn these blocking
features ON or OFF. Following are brief
explanations of some terms and ratings relat-
ed to the AutoLock™ feature.
TV PARENTAL GUIDELINES
MOVIE RATINGS
(TV BROADCASTERS)
(MOTION PICTURE ASSOCIATION OF AMERICA)
G: General Audience - All ages admitted.
Most parents would find this programming
suitable for all ages. This type of program-
ming contains little or no violence, no
strong language, and little or no sexual dia-
logue or sexual situations.
TV-Y: (All children -- This program is
TV
designed to be appropriate for all chil-
Y dren.) Designed for a very young audi-
ence, including children ages 2-6. This type of
programming is not expected to frighten
younger children.
AutoLock™ offers various Blocking
Options from which to choose:
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
TV-Y7: (Directed to Older Children --
TV
This program is designed for children
BLOCKING: The BLOCKING control is
what can be thought of as the “master switch”
for AutoLock™. This control affects the set-
tings you have chosen for blocking programs
according to movie ratings or TV ratings, or
for blocking programs that have no rating or
are unrated. When the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
ages 7 and above.) It may be more
appropriate for children who have acquired the
development skills needed to distinguish
between make-believe and reality. This pro-
gramming may include mild fantasy and comic
violence (FV).
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13. It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue.
TV-G: (General Audience -- Most par-
TV
ents would find this program suitable for
Gall ages.) This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or sexual
situations.
R: Restricted -This programming is specifi-
cally designed for adults. Anyone under the
age of 17 should view this programming
only with an accompanying parent or adult
guardian. It contains one or more of the fol-
lowing: intense violence; intense sexual situ-
ations; strong, coarse language; or intensely
suggestive dialogue.
TV-PG: (Parental Guidance
TV
NO RATING: ALL programming with no
content advisory data can be blocked if NO
RATING is set to ON.
Suggested -- This program contains
material that parents may find unsuit-
able for younger children.) This type of pro-
gramming contains one or more of the follow-
ing: Moderate violence (V), some sexual situa-
tions (S), infrequent coarse language (L), or
some suggestive dialogue (D).
Programming that has No Rating is not
encoded with any rating information from the
MPAA or the Parental Guidelines. Any pro-
gramming could fall into this category.
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence; explicit sex; or crude, indecent lan-
guage.
TV-14: (Parents Strongly Cautioned -
TV
- This program contains some material
that many parents would find unsuitable
You also can block individual channels or
block programming based on ratings of the
MPAA and TV broadcasters. (See a descrip-
tion of the ratings on this page.)
for children under 14 years of age.) This type
of programming contains one or more of the
following: intense violence (V); intense sexual
situations (S); strong, coarse language (L); or
intensely suggestive dialogue (D).
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
TV-MA: (Mature Audience Only --
TV
This program is specifically designed to
be viewed by adults and therefore may
be unsuitable for children under 17.) This type
of programming contains one or more of the
following: graphic violence (V); explicit sexual
situations (S); or crude, indecent language (L).
19
SETTING UP AN AUTOLOCK™ ACCESS CODE
TM
utoLock allows parents to block out or
A“censor” any channels they think children
should not watch. A channel blocked by the
TM
AutoLock control cannot be viewed until a
correct access code is used to unlock the chan-
nel for viewing. First, let’s set your AutoLock
access code.
Press the MENU button on the remote to
display the on-screen menu.
1
Press the CURSOR UP or DOWN but-
ton until the word FEATURES is high-
lighted.
2
4
2
1
Press the CURSOR RIGHT button to
display the FEATURES menu options.
3
Press the CURSOR UP or DOWN but-
ton until the words AUTOLOCK are
highlighted.
3
5
4
2
Press the CURSOR RIGHT button.
The screen will read, “ACCESS CODE
- - - - .”
4
5
6
6
7
Using the NUMBERED buttons, enter
0, 7, 1, 1. “XXXX” appears on the Access
Code screen as you press the numbered
buttons.
“INCORRECT CODE” will appear on
the screen, and you will need to enter 0,
7, 1, 1 again.
The screen will ask you to enter a “New
Code.” Enter a “new” 4 digit code
using the NUMBERED buttons. The
screen will then ask you to CONFIRM
the code you just entered. Enter your
new code again. “XXXX” will appear
when you enter your new code and then
display the AutoLock menu options.
7
Proceed to the next page to learn more...
HELPFUL HINT
Remember that 0711 is the default
AutoLockTM code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
The AutoLock Access
Code also can be
changed anytime using
the Setup Code Feature
NOTE TO PARENTS: It isn’t possible for
your child to unblock a channel without know-
ing your access code or changing it to a new
one. If your code has been changed without
your knowledge, then you will become aware
that blocked channels may have been viewed.
20
HOW TO BLOCK CHANNELS USING AUTOLOCK™
fter your personal access code has been
Aset (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
Press the NUMBERED (or CH +, –)
buttons to tune the channel you wish
to block or censor.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
3
3
5
8
4
6
9
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
4
5
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
2
VOL
Press the CURSOR RIGHT button.
3
5
8
1
6
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
7
1
options will be displayed.
7
Press the CURSOR UP or DOWN
buttons until the words BLOCK
CHANNELS are highlighted.
10
8
9
Press the CURSOR RIGHT button
to turn blocking ON or OFF for that
channel. When ON is selected the
channel will be blocked.
Press the CH + or – button to select
other channels you wish to block.
Repeat step 9 to block the new chan-
nel.
10
HELPFUL HINT
Remember that 0711 is the default
AutoLockTM code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
If a channel is blocked by the BLOCK
CHANNEL option, the TV will display the
screen shown to the right. To watch the
channel, enter your access code or change
the BLOCK CHANNEL option back to off.
NOTE: You also can block out the use of the
A/V external inputs on the rear of the TV. This
stops the viewing of VCR, DVD, and other
sources that can be shown through the AV in or
CVI input jacks. Select AV, or CVI; and then
select BLOCK.
21
HOW TO CLEAR ALL BLOCKED CHANNELS USING AUTOLOCK™
arious onscreen messages will appear
Vwhen someone tries to view blocked pro-
gramming. The message is determined by how
the current programming is blocked. You may
view the blocked programming and turn OFF
the AutoLock™ feature by using the Clear All
control or by entering your access code.
Press the MENU button on the
remote to show the on-screen menu.
1
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
2
4
7
2
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
1
3
4
9
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
OL
3
5
8
Press the CURSOR RIGHT button.
2
4
7
5
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
6
6
options will be displayed.
Press the CURSOR UP or DOWN
buttons until the words CLEAR ALL
are highlighted.
7
8
9
Press the CURSOR RIGHT button
to clear all blocked channels. The Clear
All option will read, “Cleared.”
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
HELPFUL HINT
If you tune to a specific channel that has
been blocked by BLOCK CHANNEL or
any of the AutoLock™ RATING options,
simply enter your four-digit access code to
view the channel.
NOTE: this will unblock ALL channels
until the TV is shut OFF. When powered
back ON, all previously blocked channels
will be blocked again.
Or, enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
The Clear All option when activated
will unblock ALL blocked channels. It
will not affect programming blocked
by the Movie or TV Rating options.
22
HOW TO BLOCK ALL CHANNELS AT THE SAME TIME
here may come a time when you want to
TBlock All the television’s channels. Maybe
you don’t want your children to watch TV for
a given time. With the Block All control, ALL
available channels (including the A/V Inputs)
can be set to block at the same time
Press the MENU button on the
remote to show the on-screen menu.
1
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
2
2
4
7
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
3
4
1
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
9
Press the CURSOR RIGHT button.
OL
3
5
8
5
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
2
4
7
6
options will be displayed.
6
Press the CURSOR UP or DOWN
buttons until the words BLOCK ALL
are highlighted.
7
8
Press the CURSOR RIGHT button
to turn Block All ON or OFF. When
ON is selected, ALL available channels
will be blocked.
When finished, press the
STATUS/EXIT button to remove the
menu from the screen.
9
HELPFUL HINT
If you tune to a blocked channel and enter
your Access Code to view the channel, ALL
blocked channels will be viewable until the
TV has been turned off. When the TV is
powered back ON, the previously blocked
channels will be blocked again.
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
23
HOW TO BLOCK PROGRAMMING BASED ON MOVIE RATINGS
fter your personal access code has been
Aset, you can select specific movie ratings
that you want to censor.
Press the MENU button on the remote
to display the on-screen menu.
1
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
2
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
2
4
7
9
3
Press the CURSOR UP or DOWN
button until AutoLock is highlighted.
4
Press the CURSOR RIGHT button.
The screen will prompt you for your
Access Code.
5
1
Using the NUMBERED buttons on
the remote, enter your 4 digit Access
Code. The AutoLock menu options
will be displayed.
3
6
5
L
8
2
4
7
9
Press the CURSOR UP or DOWN
button to highlight the words MOVIE
RATINGS.
7
8
10
Press the CURSOR RIGHT button
to display the MOVIE RATINGS
options (G, PG, PG-13, R, NC17, or
X).
6
Press the CURSOR UP or DOWN
button to highlight any of the Movie
Ratings options. When highlighted, all
these options can be turned ON (which
will allow blocking) or OFF (which
will allow viewing).
9
Use the CURSOR RIGHT button on
the remote to turn the rating option ON
or OFF.
10
To view a program
HELPFUL HINT
blocked by the Movie
Rating options, enter your
4 digit Access Code. This
will disable all blocked
Movie Ratings until the
TV is powered off and on
again. Then the blocked
options will be restored.
When a rating is turned ON, all higher ratings
also will be turned on automatically. For
example, if the R rating is turned on, the NC-
17 and X ratings also will be turned on.
All Movie Ratings can be turned ON or OFF.
Refer to page 19 for Movie Rating defini-
tions.
24
HOW TO BLOCK PROGRAMMING BASED ON TV RATINGS
his portion of the AutoLock features cover
Tprogram ratings based on the TV Industry
rating system. This is known as TV Ratings
within AutoLock.
After selecting the Autolock feature and enter-
ing your personal access code, the AutoLock
options screen appears;
Scroll the menu using the CURSOR
UP or DOWN buttons until the words
TV RATINGS are highlighted.
1
2
Press the CURSOR RIGHT button to
display the TV Ratings (TV-Y, TV-Y7,
TV-G, TV-PG, TV-14, or TV-MA).
When highlighted, the TV-Y and TV-G
can be turned ON (which will allow
blocking) or OFF (which will allow
viewing), of these rated programs.
To view a program
blocked by the TV Rating
options, enter your 4 digit
access code. This will
disable all blocked TV
Ratings until the TV is
powered off and on
1
3
5
The ratings of TV-Y7, TV-PG, TV-14,
TV-MA can be customized to block V
(violence), FV (fantasy violence), S
(sexual situations), L (coarse language),
or D (suggestive dialogue).
again. Then the blocking
options will be restored.
VOL
2
4
6
1
3
5
Press the CURSOR UP or DOWN
button to highlight the desired rating.
3
Press the CURSOR RIGHT button on
the remote to turn the TV-Y or TV-G
rating ON or OFF. Or, press the CUR-
4
SOR RIGHT button to enter the sub-
menus for the TV-Y7, TV-PG, TV-14 or
TV-MA ratings.
If the TV-Y7, TV-PG, TV-14 or TV-MA
sub-menu is accessed, press the CUR-
SOR UP or CURSOR DOWN button
to select one of the options (Block All,
V, S, L, D, or FV).
5
Press the CURSOR RIGHT button on
the remote to turn the option ON or
OFF.
6
HELPFUL HINT
When a rating is turned ON, all higher rat-
ings also will be turned on automatically.
For example, if the R rating is turned on, the
NC-17 and X ratings also will be turned on.
TV Ratings and Rating Sub-Menus
When a TV Rating is selected to
block, ALL higher ratings will be
blocked also.
25
USING THE AUTOLOCK™ BLOCKING OPTIONS
utoLock offers the viewer other blocking
Afeatures as well. With these Blocking
Options, the censoring can be turned ON or
OFF.
Press the MENU button on the
remote to show the on-screen menu.
1
2
4
7
9
Press the CURSOR UP or DOWN
button until the word FEATURES is
highlighted.
2
Press the CURSOR RIGHT button
to display the FEATURES menu
options.
3
4
1
10
Press the CURSOR UP or DOWN
button until the words AutoLock are
highlighted.
3
5
Press the CURSOR RIGHT button.
5
2
4
7
9
8
Enter the correct access code num-
ber. “XXXX” shows on the Access
Code display as you press the NUM-
BERED buttons. AutoLock menu
6
10
6
options will be displayed.
Press the CURSOR UP or DOWN
buttons until the words BLOCKING
OPTIONS are highlighted.
7
8
Press the CURSOR RIGHT button
to display the Blocking Options
(BLOCKING, UNRATED, or NO
RATING) menu.
Press the CURSOR UP or DOWN
buttons to highlight the desired fea-
ture.
9
10
When highlighted, each feature can be
turned ON or OFF using the CUR-
SOR RIGHT or LEFT buttons on the
remote.
BLOCKING OPTIONS:
BLOCKING: This is what might be called the “master switch” for AutoLock. When in the ON position, ALL blocking/censoring will
take place. When in the OFF position, ALL blocking is disabled.
UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set to
ON and the BLOCKING feature is set to OFF.
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING fea-
ture is set to OFF.
26
HOW TO USE THE CLOSED CAPTIONING CONTROL
losed Captioning (CC) allows you to
Cread the voice content of television pro-
grams on the TV screen. Designed to help the
hearing impaired, this feature uses on-screen
“text boxes” to show dialogue and conversa-
tions while the TV program is in progress.
Press the CC button on the remote to
display the current Closed Caption set-
ting.
1
2
Press the CC button repeatedly to
choose from the four Closed Caption
options (CC Off, CC 1, CC 2, CC
Mute). Dialogue (and descriptions) for
the action on the captioned TV program
will appear on-screen if the tuned pro-
gram is broadcasting CC information.
When finished, press the STATUS
/EXIT button to remove the menu from
the TV’s screen or let the option time out
and disappear from the TV screen.
3
1
1
2
HELPFUL HINT
Not all TV programs and product com-
mercials are made with Closed Caption
(CC) information included. Neither are all
Closed Caption modes (CC 1, or CC 2) nec-
essarily being used during the transmission
of a closed caption program. Refer to your
area's TV program listings for the stations
and times of Closed Caption shows.
VOL
NOTE: the CC MUTE option can be
used to set the TV to turn the Closed
Caption mode “ON” whenever the
MUTE button on the remote is pressed.
This activates the CC1 mode.
27
HOW TO SET THE SLEEP TIMER CONTROL
ave you ever fallen asleep in front of the
HTV, only to have it wake you up at two in
the morning with a test pattern sound
screeching in your ears? Well, your TV can
enable you to avoid that discomfort by auto-
matically turning itself off. With the Sleep
Timer feature, you can set a timer to automat-
ically switch the TV OFF after a period of
time you choose (15-minute increments up to
60 minutes, then 30-minute increments up to
90 minutes, then 60-minute increments up to
240 minutes).
Press the SLEEP button on the
remote control. The SLEEP timer
onscreen display will appear in the
upper part of the screen.
1
Within five seconds, press the
SLEEP button repeatedly to pick the
amount of time (15-minute increments
up to 60 minutes, then 30-minute
increments up to 90 minutes, then 60-
minute increments up to 240 minutes)
before the TV will turn itself off.
2
An onscreen countdown will appear during
the last minute before the TV shuts itself off.
VOL
1
2
HELPFUL HINT
To see how many minutes remain before the
TV shuts itself off, press the STATUS/EXIT
button.
A Sleep Timer setting can be cancelled by
pressing any button during the last minute of
the operation.
During the last 10 seconds of a
SLEEP timer setting, an onscreen
display will read GOOD BYE.
During the last minute of a
SLEEP timer setting, an onscreen
countdown will be displayed.
28
HOW TO USE THE AUTOPICTURE™ CONTROL
hether you’re watching a movie or a
Wvideo game, your TV has automatic
video control settings that will match with
your current program source or content.
AutoPicture™ quickly resets your TV’s video
controls for a number of different types of
programs and viewing conditions that you
may have in your home. The Movies, Sports,
Weak Signal, and Multimedia AutoPicture™
controls have been preset at the factory to
automatically adjust the TV’s brightness,
color, picture, sharpness, tint, and color tem-
perature levels. The Personal AutoPicture™
settings are the ones that you made through
the PICTURE options within the onscreen
menu
Press the AUTO PICTURE button
on the remote control. The current
1
AutoPictureTM setting will appear in the
middle of the screen.
1
2
Press the AUTO PICTURE button
repeatedly to select either PERSON-
AL, MOVIES, SPORTS, WEAK SIG-
NAL, or MULTIMEDIA picture set-
tings.
2
VOL
Note: The PERSONAL setting is the setting
that you setup using the PICTURE options
within the on-screen menu. This is the only
Auto Picture setting that can be changed. All
other settings are setup at the factory during
the time of production.
MOVIES - Preset picture options for watch-
ing Video Tapes, or DVDs.
SPORTS - Preset picture options for watch-
ing sporting events.
WEAK SIGNAL - Preset picture options for
watching programs where the reception is not
at its best.
MULTI MEDIA - Preset picture options for
use with video gaming.
29
HOW TO USE THE AUTOSOUND™ CONTROL
utoSound™ allows you to select from
Athree factory-set controls and a personal
control that you set according to your own
preferences through the onscreen Sound
menu. The three factory-set controls (Voice,
Music, and Theatre) enable you to tailor the
TV sound so as to enhance the particular pro-
gram you are watching. Follow these steps to
select any of the options.
Press the AUTO SOUND button on
the remote control. The current
1
AutoSoundTM setting will appear in the
middle of the screen.
Press the AUTO SOUND button
repeatedly to toggle among the four
settings: PERSONAL, VOICE,
MUSIC, or THEATRE.
2
Note: Only the PERSONAL control can be
changed by the viewer. This changes the set-
tings in the main on-screen menu's sound con-
trols.
1
2
THEATRE - Preset sound options for watch-
ing movies.
MUSIC - Preset sound options for musical
VOL
programming where there is little dialogue.
VOICE - Preset sound options for program-
ming where heavy dialogue is present.
30
USING THE QUADRA SURF BUTTONS
“list” or series of previously viewed
Achannels can be selected with the Quadra
SURF (colored) buttons on your remote con-
trol. With this feature you can easily switch
between different TV programs that currently
interest you. The Quadra Surf control allows
you set up four different personal Surf lists
using the colored buttons (on the remote con-
trol), each holding up to ten channels in its
quick viewing“list.”
Press the CHANNEL (+) or (–) but-
tons (or the NUMBER buttons) to select
a channel to add to one of the SURF
lists.
1
3
4
Press the SMILEY
button on the
remote control to ADD the channel to
one of the SURF lists.
2
3
5
6
Press the corresponding COLORED
(Red, Green, Yellow or Blue) button to
add the channel to that button’s Surf list.
(Up to ten channels per button can be
stored.)
2
VOL
Repeat steps 1 through 3 to add additional
channels (up to 10) to each of the the SURF
lists.
1
To remove a channel from one of the SURF
lists;
Press the COLORED Quadra Surf
button until the desired channel
appears. The screen will display the
channel number with a colored
“Smiley” face to indicate the Colored
button it relates to.
4
While the “Smiley” face channel
indicator is displayed, press the
5
FROWNIE
screen will read, “Remove item? -
Press .”
face button. The
Press the FROWNIE
face button
again to confirm your decision to
remove the channel from the Surf list.
6
ALTERNATE
CHANNEL BUTTON
Press the A/CH
5
Repeat steps 4-6 to remove other channels
from Surf lists.
22
button toggle
between the pres-
ent channel and
the last previously
viewed channel.
1
1
31
USING THE QUADRA SURF BUTTONS
he Quadra Surf buttons on your remote
Tcontrol allow you to store up to 10 chan-
nels per button (40 total). This is a great fea-
ture if you want to store all your favorite
Sports channels, Movie channels, or News
channels in one surf list. Family members can
have there own favorite list of channels. You
can even program the AV Input channels (AV,
and CVI) for each button making them a
“source” button for your external accessory
devices.
Assuming channels have now been added to
the four Quadra Surf lists (the four colored
buttons on the remote, see the previous page),
let’s review how the feature works.
Press one of the pre-programmed
COLORED buttons on the remote
(Red, Green, Yellow or Blue). The
screen will display a smiley face with the
first programmed channel for that surf
list.
1
1
2
3
5
While the colored “smiley” face still
appears on the screen, press the same
COLORED button on the remote to
tune the second channel programmed for
2
that specific surf list.
VOL
Repeatedly pressing the same COL-
ORED button while the “smiley” face
appears will tune all the programmed
channels for that specific surf list. After
the last channel is tuned, pressing the
COLORED button again will return you
to the first channel in the list.
3
If the “smiley” face disappears from the
screen and the same COLORED button
is pressed, the surf channels will be dis-
played starting with the FIRST pro-
grammed channel again.
5
Repeat steps 1-3 for the other three
COLORED buttons (Surf lists) if
desired.
4
5
Any time the “smiley” face appears
with the channel number, pressing the
“frownie” face button will allow you
to remove it from the list (see the pre-
vious page for more details).
32
TROUBLESHOOTING
No Power
Remote Does Not Work
• Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Remote Does Not Work Continued
• Clean the remote control and the remote control sensor win-
dow on the TV.
• Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
• Check to be sure the TV outlet is not on a wall switch.
• Check that the outlet is not on a wall switch.
• Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
• Check antenna connections. Are they properly secured to the
TV's ANT 75Ω plug?
• Check the TUNER MODE control for the correct tuner set-
ting.
• Try running the Auto Program feature to find all available
channels.
• Press the AV button on the remote to make sure the correct
signal source is selected.
TV Displays Wrong Channel or No Channels Above 13
• Repeat channel selection.
• Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
No Sound
• Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
• Check the VOLUME buttons.
• Check the MUTE button on the remote control.
• If you’re attempting to hook up auxiliary equipment, check
the audio jack connections located on the front of the TV.
33
CARE AND CLEANING
WARNING Concerning Stationary Images on the TV
Screen:
PLACEMENT OF THE TV
• To avoid cabinet warping, cabinet color changes, and
increased chance of set failure, do not place the TV where
temperatures can become excessively hot; for example, in
direct sunlight or near a heating appliance.
Do not leave stationary or letterbox images on screen
for extended periods of time. This can cause uneven
picture-tube aging.
• Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Normal use of the TV should involve the showing of pictures
that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on
screen too frequently, because subtle ghost images can be left
on the picture tubes. Sources of stationary images may be DVD
disks, laser disks, video games, CD-i disks, videotapes, digital
television boxes, broadcast channels, cable channels, satellite
channels, and others. Here are some examples of stationary
images (this is not an all-inclusive list; you may encounter
others in your viewing):
CLEANING
• To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, nonscratching duster to
keep the TV clean.
• When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front
screen with a clean cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap
or detergent. Use a clean, dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
• Never use thinners, insecticide sprays, or other chemicals on
or near the cabinet, as they might cause permanent marring
of the cabinet finish.
• DVD menus—listings of DVD disk content
• Letterbox black bars—shown at the top and bottom of the
TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio.
• Video-game images and scoreboards
• Television station logos—present a problem if they are
bright and stationary; moving or low-contrast graphics are
less likely to cause uneven aging of the picture tube
• Stock-market tickers—presented at the bottom of the TV
screen
• Shopping channel logos and pricing displays—bright
and shown constantly or repeatedly in the same location on
the TV screen.
34
GLOSSARY OF TELEVISION TERMS
Alternate Channel • Allows you to toggle between the last two
channels viewed by pressing the A/CH button on the remote
Menu • An onscreen list of feature controls available for you to
adjust or set.
control.
Onscreen Displays (OSD) • The wording or messages generat-
ed by the television (or VCR) to help you with specific feature
controls (color adjustment or programming, for example).
Audio/Video Inputs • Jacks (standard RCA), located on the
back of the TV, used for external accessory devices. These jacks
are designed to receive higher picture resolution and offer
sound-connection options.
Remote Control Sensor Window • The window or opening
found on the television control panel through which infrared
remote control command signals are received.
Auto Programming • When activated, this feature scans for all
available channels from regular antenna or cable signals and
stores only active broadcast stations in the TV’s memory.
Second Audio Program (SAP) • An additional audio channel
provided for in the Multichannel Television Sound (MTS)
broadcast standard. A monaural soundtrack included within the
recorded or video signal (usually containing a second language
translation for the displayed programming).
Channel Edit • The feature that allows you to add or delete
channels from the list of channels stored in the TV’s memory.
Closed Captioning • The broadcast standard feature that allows
you to read the voice content of television programs on the TV
screen. Designed to help the hearing impaired, Closed
Captioning shows dialogue and conversations while a TV pro-
gram is in progress.
Status/Exit Button • The remote control function that allows
you to quickly confirm what channel number you are watching.
Status/Exit can also be used to clear the television of onscreen
displays or information. You can use Status/Exit rather than hav-
ing to wait for the displays to “time out,” or automatically disap-
pear from the screen.
Coaxial Cable • A single solid wire normally matched with a
metal plug (F-type) end connector that screws (or pushes) direct-
ly onto a 75-ohm input found on the television or VCR.
S-Video Input • Signal input that allows direct connection of
high-resolution video sources, such as a satellite receiver, DVD
player, S (Super)-VHS videocassette recorder, or video games.
Provides improved picture resolution, sharpness, and clarity.
Component Video Inputs • Inputs that allow the separate recep-
tion of blue, red, and luminance signals. These inputs provide
the highest possible color and picture resolution in the playback
of digital signal-source material, such as the kind available from
DVD players.
Tint • TV function that allows you to change the general color
balance between cool and warm. Adjust tint according to your
personal preference.
Incredible Stereo (or Surround) • False acoustic management
of the audio signal that produces a dramatic expansion of the
wall of sound that surrounds the listener and heightens overall
viewing pleasure.
35
INDEX
Alternate Channel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
AutoLock™ Controls
Jack Panel Input/Output Connections
Audio/Video Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
AV1 Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
AV2 Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CVI - Component Video Input Jacks . . . . . . . . . . . . . . . . . . .9
Jack Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Monitor Output Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
S-Video Input Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Registration of TV Information . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
SAP (Secondary Audio Programs) Control . . . . . . . . . . . . . . .18
Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Stereo/Mono Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Quadra Surf™ (Channel Surf) Control . . . . . . . . . . . . . . .33-34
Timer Controls
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Blocking All Channels at the same time . . . . . . . . . . . . . . .25
Blocking Programs based on Movie Ratings . . . . . . . . . . . .26
Blocking Programs based on TV Ratings . . . . . . . . . . . . . .27
Blocking Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Blocking Control Options . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Clearing All Blocked Channels at the same time . . . . . . . . .24
Understanding the AutoLock™ Features . . . . . . . . . . . . . . .21
AutoPicture™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
AutoSound™ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
AVL (Automatic Volume Leveler) Control . . . . . . . . . . . . . . .16
Balance Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Bass Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Care and Cleaning Information . . . . . . . . . . . . . . . . . . . . . . . .35
Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Color Temperature (Color Temp) Control . . . . . . . . . . . . . . . .12
Contrast+ Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
DNR (Noise Reduction) Control . . . . . . . . . . . . . . . . . . . . . . .13
Factory Service Locations . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Feature Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Incr.(edible) Surround Control . . . . . . . . . . . . . . . . . . . . . . . . .17
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Activate Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Clock, Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Display Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Start Channel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Start Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Stop Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Treble Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Warranty (Limited) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
36
FACTORY SERVICE LOCATIONS
Detroit/Toledo
Milwaukee
★
•
Cleveland/N Ohio
•
•
Chicago
★
Columbus
San Francisco/Metro Area
•
★
Cincinnati
★
Los Angeles
Knoxville/E Tennessee
Nashville
★
★
•
Charlotte
Chattanooga
★
•
Philadelphia/S New Jersey
•
•
Atlanta/N Georgia
Dallas-Fort Worth
•
Washington/Baltimore
★
★
Indicates In-Home Service Only
Milwaukee: call Chicago
★
Orlando
Houston
•
Cincinnati and Columbus: call Cleveland
Nashville and Chattanooga: call Knoxville
Washington/Baltimore: call Philadelphia
Charlotte: call Atlanta
Tampa/W Florida
•
★
Ft. Myers/SW Florida
Miami/SE Florida
★
All Florida locations: call Tampa
Los Angeles: call San Francisco
Toll-free numbers provided on the next page
•
Indicates In-Home/Carry-In Service
Toll-free numbers provided on the next page
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For
Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le produit est
sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-
tactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame
al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at
1-800-661-6162 (French speaking)
1-800-531-0039 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips á:
1-800-661-6162 (Francophone)
1-800-531-0039 (Anglais ou Espagnol)
En la Canadá
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo
Favor de comunicarse con Philips al:
1-800-661-6162 (Francés)
1-800-531-0039 (Inglés o Español)
MAC2929 Rev. DD - 4/5/2002
EL4482-4 Rev. DD
3135 015 07541
37
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE
OF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L’EMPLACEMENT DE CES DÉPÔTS
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.
ATLANTA
CLEVELAND
CHICAGO
Philips Factory Service
550 Franklin Road., Suite F
Marietta, GA 30067
800-273-1501
Philips Factory Service
950 Keynote Circle
Brooklyn Heights, OH 44131
800-331-7037
Philips Factory Service
1279 W. Hamilton Pkwy.
Itasca, IL 60143
800-531-2922
TAMPA
DETROIT
KNOXVILLE
Philips Factory Service
1911 US Highway 301 North
Tampa, FL 33619
800-442-2027
Philips Factory Service
25173 Dequindre
Madison Heights, MI 48071
800-438-1398
Philips Factory Service
6700 D Papermill Rd.
Knoxville, TN 37919
800-821-1767
SAN FRANCISCO
DALLAS–FORT WORTH
Philips Factory Service
415 N. Main Street, #107
Euless, TX 76040
PHILADELPHIA
Philips Factory Service
681 East Brokaw Rd.
San Jose, CA 95112
800-300-9013
Philips Factory Service
352 Dunks Ferry Rd.
Bensalem, PA 19020
800-847-9320
800-952-3254
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
MAC2929 4/5/2002
38
NOTES
39
LIMITED WARRANTY
COLOR TELEVISION
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product must be carried in for service.
WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
WHAT IS COVERED?
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
Warranty coverage begins the day you buy your product. For 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges. From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges.
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
TO GET WARRANTY SERVICE IN U.S.A.,
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or author-
ized service center to arrange repair.
All parts, including repaired and replaced parts, are covered only for
the original warranty period. When the warranty on the product
expires, the warranty on all replaced and repaired parts also expires.
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
FOR WARRANTY COVERAGE IN CANADA...
Note: Product Warranty coverage may vary between countries where
product is distributed by Philips Consumer Electronics Company. In
order to receive full and specific warranty details for products sold and
serviced in Canada, please contact Philips at:
•
product repair and/or part replacement because of misuse, acci-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Electronics Company.
reception problems caused by signal conditions or cable or antenna
systems outside the unit.
a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
•
•
1-800-661-6162 (from Canada - French Speaking)
1-800-531-0039 (English and Spanish Speaking)
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damages, so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
REMEMBER...
Please record the model and serial numbers found on the product
below. Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL # ________________________________________________
SERIAL # ________________________________________________
• a product used for commercial or institutional purposes.
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is offi-
cially distributed by Philips Consumer Electronics Company. In coun-
tries where Philips Consumer Electronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
Philips Consumer Electronics Company, P.O. Box 520890, Miami, FL 33152, (402) 536-4171
Printed in U.S.A.
40
|