d
e
art
t
s
g
tin
Ge
Operating Instructions
k
c
ba
ay
Pl
DVD Recorder
Model No. DMR-ES30V
g
in
rd
o
c
Re
D
DV
g
tin
Ed
nt
s
n
e
i
n
tio
nc
nve
fu
Co
k
c
ba
y
a
Pl
g
n
i
S
rd
o
c
VH
Re
nt
s
n
e
i
n
tio
nc
nve
fu
Co
g
)
n
i
r
ng
er
bi
sf
ub
n
D
(
If you have any questions contact
In the U.S.A: 1-800-211-PANA(7262)
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully.
In Canada:
1-800-561-5505
e
nc
For U.S.A. only
The warranty can be found on page 73.
e
r
Before connecting, operating or adjusting this product, please read
the instructions completely.
e
f
Re
Please keep this manual for future reference.
For Canada only
The warranty can be found on page 74.
l
La guía rápida en español se encuentra en la página 77–83.
ño
pa
s
E
VQT0N92
P PC
Getting started
d
e
art
IMPORTANT SAFETY INSTRUCTIONS
t
s
g
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
tin
Ge
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
(4) Follow all instructions.
(5) Do not use this apparatus near water.
(11) Only use attachments/accessories specified by the
manufacturer.
(6) Clean only with dry cloth.
(7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
(12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
(8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
(9) Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
(13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
(14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Precautions for installation
Useful features
You can enjoy both DVD and VHS with the unit.
Do not place the unit on
amplifiers or equipment
that may become hot.
The heat can damage the unit.
This DVD Recorder can record images and sounds in high quality to
new features that outperform older tape formats. The following
information summarizes a few of these features.
ª DVD
Progressive output (l 15, 19)
Before moving the unit, ensure the disc tray is empty.
Failure to do so will risk severely damaging the disc and the
unit.
If you connect the unit with a progressive output-compatible TV, you
TVs (of the interlace output type) can present.
Finalize (l 31)
Video format) and +R on other players.
∫Cautions as to condensation
Condensation can cause unreliable playback of VHS recordings.
Condensation may form in the following cases,
Instant play (l 33)
≥The unit is brought from cold surroundings into a well-heated room.
≥The unit is suddenly brought from cool surroundings, such as an
air-conditioned room or car, to a place which is hot and humid.
≥During the rainy season.
This function can quickly find and play a video program you wish to
recorded video immediately.
In any of the above-mentioned conditions, do not operate the unit for
at least 2 hours. The unit is not equipped with a dew sensor.
Quick view (l 21)
This function allows you to watch news, information and other
programs in a short time.
∫Other precautions for installation
≥The unit should not be installed or operated near large magnets or
electromagnetic devices. Such devices can damage pre-recorded
VHS recordings.
≥Do not place any heavy objects atop the unit, and do not install it in
a confined space. Please allow for adequate air circulation.
≥The unit should not be mounted in a vertical position. It’s designed
to operate in the horizontal position.
Chasing play (l 27)
There is no need to wait until recording is complete. Without stopping
beginning.
Instant recording (l 25)
recording button, the unit finds available recording space and begins
recording right away.
About descriptions in these operating
instructions
≥Pages to be referred to are indicated as (l ±±).
≥The explanations concerning discs are indicated by [DVD], and
those concerning video are indicated by [VHS].
Simultaneous recording and play (l 27)
while recording another program.
Time slip (l 22, 27)
This function enables you to jump to the scene you specify during
play and also while recording.
One touch transfer (dub) (l 57, 59)
This function can copy video from VHS to DVD and vice versa.
ª VHS
Long recording (l 51)
With this function, you can record approx. 10 hours of video onto a T-
120 cassette, for example.
3
VQT0N92
Getting started
Contents
Precautions for installation................................................................3
Useful features..................................................................................3
Contents ...........................................................................................4
Maintenance .....................................................................................8
Main unit .........................................................................................11
≥The unit’s display......................................................................12
Accessories ....................................................................................12
- Other antenna connections to the unit...................................14
- To enjoy multi-channel surround sound on DVD-Video
- Connection to a stereo amplifier (analog connection)............15
STEP 2 Plug-in Auto Tuning..........................................................16
≥Channel captions......................................................................18
Clock Settings ................................................................................46
≥Removing Interference.............................................................20
Playing discs...................................................................................21
Starting play from where you stopped it (Resume Function)..........21
Skipping..........................................................................................21
Direct play.......................................................................................22
CM Skip ..........................................................................................22
Displaying the TV image as a picture-in-picture/
Selecting an amount of time to skip — Time Slip.........................22
Changing audio during play............................................................23
Playing discs which contain both MP3 and still pictures.................23
Using menus to play MP3 discs......................................................23
≥Using the tree screen to find a group .......................................24
To show JPEG Menu......................................................................24
- Playing a still picture ..............................................................24
- Start Slide Show/Slide Interval...............................................24
- To select the still pictures in another folder............................24
4
VQT0N92
Getting started
e
t
Video cassette information .............................................................48
Cue/Review ....................................................................................49
Jet Search.......................................................................................49
Slow................................................................................................49
Playing a tape with high image quality............................................50
Ajustes del canal de guía para el sistema VCR Plus+.........................................................78
≥Specifying the time when recording will stop............................51
Cautions for using scheduled recording on DVD and VHS ............52
Check, change or delete programs.................................................53
Reproducción
Grabación
Grabación temporizada..................................................................83
≥Uso del sistema VCR Plus+.....................................................83
≥Controle, cambie o borre el programa .....................................83
VHS Index Search System (VISS)..................................................54
Changing the unit’s settings............................................................54
≥Common procedures................................................................54
Changing audio...............................................................................55
Auto Bilingual Choice Function.......................................................55
Transfer (Dubbing) from DVD.........................................................59
Glossary..........................................................................................64
Error messages ..............................................................................66
Troubleshooting guide ....................................................................67
≥Common...................................................................................67
≥DVD..........................................................................................70
≥VHS..........................................................................................71
Product Service ..............................................................................72
≥Product information ..................................................................72
Limited Warranty (ONLY FOR U.S.A.) ...........................................73
Limited Warranty (ONLY FOR CANADA).......................................74
Specifications..................................................................................75
Index...............................................................................................76
5
VQT0N92
Getting started
Concerning discs
∫ Discs you can use for recording and play [12 cm (5z)/8 cm (3z)]
Disc type
Logo
DVD-RAM
≥4.7 GB/9.4 GB, 12 cm
(5z)
DVD-R
DVD-RW
rR
(DVD-Video format)
≥4.7 GB, 12 cm (5z)
≥1.4 GB, 8 cm (3z)
(DVD-Video format)
≥4.7 GB, 12 cm (5z)
≥1.4 GB, 8 cm (3z)
≥4.7 GB, 12 cm (5z)
≥2.8 GB, 8 cm (3z)
–
Indicated in these
instructions with
[-R] before finalization
[-RW‹V›] before finalization [+R] before finalization
[RAM]
[DVD-V] after finalization
[DVD-V] after finalization
[DVD-V] after finalization
Main use
Re-writable discs
(recordable until the disc
is full)
One time recording discs
(recordable until the disc
is full)
Maximum recording time
Play on other player
Approx. 8 hours
(Approx. 16 hours on a
double-sided disc°)
Approx. 8 hours
Approx. 8 hours
Approx. 8 hours
Only on DVD-RAM
compatible players. It is
not necessary to finalize
the disc. (l 64)
Only after finalizing the
disc. (l 31, 64)
Only after finalizing the
disc. (l 31, 64)
Only after finalizing the
disc. (l 31, 64)
What you can do on this unit
(Y: Possible, t: Impossible)
Chasing playback
Y
t
t
t
t
t
t
Recording broadcasts that
allow one copy
Y
(CPRM (l 64)
compatible discs only)
Recording both Main and
SAP of MTS broadcast
Y
Y
t
t
t
Only one is recorded.
(l 44, Select MTS)
Only one is recorded.
(l 44, Select MTS)
Only one is recorded.
(l 44, Select MTS)
Recording 16:9 aspect
picture
t
t
t
(The picture is recorded in (The picture is recorded in (The picture is recorded in
4:3 aspect.)
4:3 aspect.)
4:3 aspect.)
Entering text
Erasing titles
Y
Y
Y
Y
Y
Y
Y
Y
(Available space does not (Disc space increases
(Available space does not
increase after erasing.)
increase after erasing.)
only when the last
recorded title is erased.)
Creating playlists
Y
t
t
t
° You cannot consecutively record or play both sides.
≥We recommend using Panasonic discs. We recommend using DVD-RAM discs with cartridges to protect them from scratches and dirt.
≥Discs from other manufactures may not be recorded or played due to the condition of the recording.
≥You may not be able to record to DVD-R, DVD-RW and +R discs on this unit or play them due to the condition of the recording.
≥You cannot record programs that allow “One time only recording” to CPRM compatible DVD-R and DVD-RW on this unit. You can record
other programs as DVD-Video format.
≥You can use high speed recording compatible discs on this unit.
∫DVD Video Recording format
This is a recording method which allows you to record and edit TV
∫DVD-Video format
This recording method is the same as commercially available
broadcasts and so on.
DVD-Video.
≥Digital broadcasts that allow “One time only recording” can be
recorded to a CPRM compatible disc. You can record to CPRM
compatible DVD-RAM on this unit.
≥Play is only possible on a compatible DVD player.
Use a DVD-RAM to record in DVD Video Recording format.
≥Digital broadcasts that allow “One time only recording” cannot
be recorded.
≥These can be played on a DVD player. However programs
recorded on this unit must be finalized to be played on other
DVD players.
Use a DVD-R or DVD-RW to record in DVD-Video format.
6
VQT0N92
Getting started
d
e
∫ Play-only discs [12 cm (5z)/8 cm (3z)]
art
t
s
g
Disc type
DVD-Video
DVD-Audio DVD-RW
(DVD Video Recording format)
rRW
Audio CD
Video CD
tin
Logo
Ge
–
–
Indicated in these
instructions with
[DVD-V]
[DVD-A]
[-RW‹VR›]
[DVD-V]
+RW°
[CD]
Recorded CD-R° and
[VCD]
Instructions
High quality
movie and
music discs
High fidelity
music discs
DVD-RW° recorded on another
DVD recorder
Recorded
recorded on audio and CD-RW° with music and
≥Played on ≥You can play programs that allow another
music
music
video
this unit in 2 “One time only recording” if they DVD
(including recorded in
(including
CD-R/
RW°)
channels
have been recorded to a CPRM recorder
compatible disc.
CD-R/
RW°)
MP3 (l 23)
Still pictures
(JPEG and
TIFF)
≥By formatting (l 31) the disc,
you can record to it in DVD-Video
format and play it on the unit.
recorded on
CD-R/RW°
It may be necessary to finalize the disc on the
equipment used for recording.
° Play may be impossible on some DVD-RW (DVD Video Recording format), +RW, CD-R or CD-RW discs due to the condition of the
recording.
≥You can play still pictures (JPEG/TIFF), CD-DA, Video CD and MP3 format data recorded on CD-R/RW. Close the session or finalize the
disc after recording.
≥The producer of the disc can control how discs are played. So you may not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
Note about using a DualDisc
The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so
play may not be possible.
Regarding DVD-Audio
Region number supported by this unit
Some multi-channel DVD-Audio will prevent down-mixing (l 64)
of all or part of their contents if this is the manufacturer’s
intention. Tracks that are prevented from being down-mixed will
not play properly on this unit (e.g. audio is played from the front
two channels only). Refer to the disc’s jacket for more
information.
Region numbers are allocated to DVD players and DVD-Video
according to where they are sold.
≥The region number of this unit is “1”.
“ALL”.
Example:
1
2
1
ALL
4
∫ Discs that cannot be played
∫ Concerning logo marks
≥2.6/5.2 GB DVD-RAM, 12 cm (5z)
≥3.95/4.7 GB DVD-R for Authoring
Dolby Digital (l 44)
This is a method of coding digital signals
≥DVD-R recorded in DVD Video Recording format
≥DVD-R (DVD-Video format), DVD-RW (DVD-Video format), +R
recorded on another unit and not finalized (l 64, Finalize)
≥PAL discs (you can still play the audio on DVD-Audio)
≥DVD-Video with a region number other than “1” or “ALL”
≥Blu-ray
developed by Dolby Laboratories. Not only stereo
(2 channel) audio, these signals can also be multi-
channel audio. A large amount of audio
information can be recorded on one disc by this
method.
≥DVD-ROM, DVD-R DL, +R DL, +R 8cm (3z), CD-ROM, CDV, CD-
G, Photo CD, CVD, SVCD, SACD, MV-Disc, PD, DivX Video Disc,
etc.
DTS Digital Surround (l 44)
This surround system is used in many movie
theaters around the world. The separation
between channels is good and the compression
ratio is low, so realistic sound effects are possible.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused
by such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured by another company.
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc drive manufactured by another company is played in this unit.
7
VQT0N92
Getting started
∫ Disc handling
∫ Inserting discs
∫How to hold a disc
Do not touch the recorded surface.
[1] Press [<, OPEN/CLOSE] on the main unit to
open the tray.
≥You can insert a cartridge or non-cartridge disc.
[2] Press [<, OPEN/CLOSE] on the main unit to
close the tray.
≥If you insert a DVD-RAM with the write-protect tab set to
“PROTECT” (l 30), play starts automatically.
∫Concerning non-cartridge discs
Be careful about scratches and dirt.
Note
≥A double-sided disc should be loaded with the side you want to
record/play facing down.
≥It is not possible to record continuously from one side of a double-
sided disc to the other. You will need to eject the disc and turn it
over.
∫If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
≥When using 8 cm (3q) DVD-RAM or 8 cm (3q) DVD-R, remove the
disc from the cartridge.
Non-cartridge disc
Cartridge disc
∫Handling precautions
(1)
(2)
≥Do not attach labels or stickers to discs. (This may cause disc
warping and unbalanced rotation, rendering it unusable.)
≥Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Do not drop, stack, or cause impact to discs. Do not place objects
on them.
D
DV
(3)
≥Do not use the following discs:
(1) Insert label-up.
- Discs with exposed adhesive from removed stickers or labels
(rental discs etc.).
(2) Insert fully so it clicks into place.
(3) Insert label-up with the arrow facing in.
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.
Maintenance
The precision parts in the unit are readily affected by the
environment, especially temperature, humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean the unit, wipe with a soft, dry cloth.
≥Never use alcohol, thinner or benzine to clean the unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
≥Do not place in the following areas:
- In direct sunlight.
- In very dusty or humid areas.
- Near a heater.
- Locations susceptible to significant differences in temperature
changes (condensation can occur).
- Where static electricity or electromagnetic waves occur.
≥To protect discs from scratches and dirt, return them to their cases
or cartridges when you are not using them.
Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, possibly
making it impossible to record or play discs.
Use the lens cleaner about once every year, depending on
Carefully read the lens cleaner’s instructions before use.
Lens cleaner: LF-K123LCA1 or RP-CL720 (On sale from May
2005)
∫When the unit is not to be used for a long time
To save power, unplug it from the household AC outlet. The unit consumes a small amount of power even when it is turned off.
Standby power consumption
Front Display (l 45)
Automatic
Approx. 9 W
Approx. 2 W
Bright
On
Off
Approx. 10 W
Approx. 4 W
Quick Start (l 43)
∫Quick Start (l 43)
1 Sec. Quick Start for Recording on DVD-RAM°
° From the power off state, recording on DVD-RAM starts about 1 second after first pressing the [Í, DVD/VHS POWER] and then
sequentially pressing the [¥, REC] (Quick Start Mode).
8
VQT0N92
Getting started
d
e
Using DVD-R, DVD-RW and +R on this unit
art
t
s
g
Restrictions with DVD-R, etc.°
≥16:9 aspect programs are recorded in 4:3 aspect.
≥Either Main or SAP can be recorded for MTS broadcasts.
≥Playing the disc on other DVD players is not possible before finalizing.
tin
Ge
° DVD-R, DVD-RW and +R are collectively referred to as “DVD-R, etc.” on this page.
Main
SAP
The selected audio only is recorded.
e.g., Main only
Hello
Hola
Record to DVD-R, etc.
Hello
16:9 aspect program
with Main and SAP
4:3 aspect
Therefore, follow the steps below when you use DVD-R, etc.
∫When recording an SAP program to DVD-R, etc.
Select the audio to record before recording or transferring (dubbing).
Some television programs are broadcast in SAP (Secondary Audio Program). You have to select the audio recording type before recording or
transferring (dubbing) them to DVD-R, etc.
Select “Main” or “SAP” in “Select
MTS” in the SETUP menu (l 44).
Record to DVD-R, etc. The selected audio only is recorded.
Main
SETUP
Main
SAP
Dynamic Range Compression
Select MTS
Off
Main
Hello
Hello
Hola
Digital Audio Output
Channel
Setup
Disc
Video
Audio
Display
∫Playing the disc on other DVD players
The disc must be finalized after recording or transferring (dubbing) (l 31).
It is necessary to finalize DVD-R, etc. on this unit after recording or transferring (dubbing) titles to them. You can then play them as a
commercially sold DVD-Video. However the discs become play-only and you can no longer record or transfer (dub).°
° You can record and transfer (dub) again if you format DVD-RW.
Play on other DVD equipment
Record to DVD-R, etc.
Finalize
CH
AR
SE
ER
ENT
L
V
O
Y
PLA
DIS
NU
ME
T
OP
N
TUR
RE
NU
ME
O
N
Í
/I
Í
D
O
U
B
L
E
R
E
-
M
A
S
T
E
R
C
D
S
E
Q
U
E
N
T
I
A
L
DISC
1
2
3
4
5
∫
;
1
:/6
5/9
D
I
S
C
E
X
C
H
A
N
G
E
D
I
S
C
S
K
I
P
<OPEN/CLOSE
F
OF
DC
IN
9V
EN
OP
D
UN
RO
UR
A.S
T
EA
D
E
R
EP
MO
OR
NIT
MO
E
E
M
OD
TUR
PIC
9
VQT0N92
Getting started
Remote control
(28)
(27)
∫[VHS] and [DVD] button
[DVD]
≥Before performing DVD operations, be sure to
press the [DVD] button. Also, make sure the
DVD indicator lights up on the unit.
VHS
CH
DVD
DVD/ VHS POWER
TV
REC
POWER
(1)
[VHS]
VOLUME
CH
INPUT SELECT TV/ VIDEO
≥Before performing VHS operations, be sure to
press the [VHS] button. Also, make sure the
VHS indicator lights up on the unit.
VHS
CH
DVD
(2)
(3)
REC
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
(1) Turn the unit on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 16
(2) Input select (IN1, IN2, TP or DC) . . . . . . . . . . . . . . . . . . .l 63
(4) Select channels and title numbers etc./Enter numbers
(5) Cancel/Reset the tape counter
(26)
(4)
(6) Basic operations for recording and play
AUDIO
(7) Show Top menu/Direct Navigator . . . . . . . . . . . . . . .l 23, 33
(8) Selection/Enter, Frame-by-frame. . . . . . . . . . . . . . . .l 16, 21
(9) Show sub menu . . . . . . . . . . . . . . . . . . . . . . . . . .l 24, 33, 37
(10)Show scheduled recording list . . . . . . . . . . . . . . . . .l 29, 53
(11)Show on-screen menu . . . . . . . . . . . . . . . . . . . . . . . . . . .l 40
(12)Start recording . . . . . . . . . . . . . . . . . . . . .l 25, 51, 58, 62, 63
(13)Change recording mode . . . . . . . . . . . . . . . . . . . . . .l 25, 51
(14)One touch transfer (dub) (“ DVD, VHS —) . . . . . . . . .l 57, 59
View select (A, B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 60
(15)Create chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 22
(16)Select VCR/TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 20
(17)Erase items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 22
(18)Add/delete channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 17
(19)Show status messages . . . . . . . . . . . . . . . . . . . . . . .l 47, 55
(20)Skip the specified time/
(25)
(24)
(23)
CANCEL/RESET
VCR Plus+
CM SKIP
(5)
(6)
SLOW/
SKIP/ INDEX
REW SEARCH FF
PLAY
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
(7)
(8)
(9)
(22)
(21)
Display the TV image as a picture-in-picture
Jet rewind button (JET REW). . . . . . . . . . . . . . . .l 22, 27, 49
(21)Return to previous screen
RETURN
TIME SLIP
SUB MENU
(22)Show FUNCTIONS window . . . . . . . . . . . . . . . . . . . . . . .l 47
Show VHS menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 54
(23)Skip a minute forward . . . . . . . . . . . . . . . . . . . . . . . . . . .l 22
(24)Show VCR Plusi screen . . . . . . . . . . . . . . . . . . . . . .l 28, 52
(25)Select audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 23, 25, 55
(26)Channel select/
TRACKING/V-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 50
(28)Transmission window
S
SCHEDULE
DISPLAY
STATUS
JET REW
(10)
(11)
(12)
(13)
(14)
(20)
(19)
(18)
(17)
(16)
(15)
REC
REC MODE DVD ERASE ADD/DLT
CREATE
VCR/TV
DUBBING
CHAPTER
VHS
A
DVD
B
Note
≥Buttons such as the [¥, REC] button do not protrude as much as
other buttons to stop them from being pressed accidentally.
≥The word “button” is not used in these operating instructions so
“Press the [ENTER] button.” is shown as “Press [ENTER].”
≥You can use this remote control to operate your TV if you set the
TV manufacturer code (l 19).
10
VQT0N92
Getting started
d
e
∫ Batteries and remote control
art
t
∫About batteries
∫How to use the remote control
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
(23 feet) directly in front of the unit.
s
g
R6, AA, UM-3
≥Insert so the poles (i and j) match
those in the remote control.
≥Do not use rechargeable type
batteries.
tin
Ge
Remote control signal sensor
Do not:
≥mix old and new batteries.
≥use different types at the same
time.
20
20
≥heat or expose to flame.
30
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
30
7 m (23 feet) directly in front of the unit
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Note
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
≥Keep the transmission window and the unit’s sensor free from dust.
≥Operation can be affected by strong light sources, such as direct
sunlight, inverter fluorescent lamps, and the glass doors on
cabinets.
Note
≥If you cannot operate the unit or TV using the remote control after
changing the batteries, please re-enter the codes (l 19).
Main unit
Remote control signal sensor
Cassette compartment
Disc tray
(1) [A]
(2)
(3) (4)
(1)
(2) [B] (3)
POWER
EJECT
OPEN/CLOSE
VHS
CH
DVD
S
VIDEO IN
CH
REC
REC
DUBBING
VIDEO IN
L/MONO
–
AUDIO IN
–
R
VHS
DVD
IN2
/k1.3
The unit’s display
[C]
(5)(6)
[D]
(4) (5)
Common to DVD/VHS
DVD
[A] DVD/VHS POWER on/off button (Í/I, POWER) . . . . . . . l 16
≥To switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small
amount of power.
(1) Disc tray open/close button (<, OPEN/CLOSE) . . . . . . .l 8
(4) DVD Stop button (∫). . . . . . . . . . . . . . . . . . . . . . . . . . . . .l 21
[B] DVD/VHS drive indicator
≥Lights when the DVD or VHS drive is selected.
[C] IN2 input terminals (IN2) . . . . . . . . . . . . . . . . . . . . . . . . . l 63
[D] One Touch Transfer (Dubbing) operation button
≥From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 57
≥From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 59
used for about 6 hours.
You can turn this feature off or change the time to 2 hours.
(l 43, “Off Timer”)
VHS
(1) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 48
(2) VHS Search buttons (V/6, 5/W)
(3) VHS Channel up/down buttons (CH, W, X) . . . . . . . . . . l 50
(4) VHS Recording button (¥, REC). . . . . . . . . . . . . . . . . . . l 51
(5) VHS Stop button (∫) . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49
(6) VHS Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 49
11
VQT0N92
Getting started
∫ The unit’s display
Common to DVD/VHS
DVD
[A] Main display
(1) Disc operation status
(2) Disc type
≥Current time
≥VHS recording and play counter
≥Scheduled recording start time
≥Miscellaneous messages, etc.
[B] Transfer (Dubbing) direction indicator
[C] Main display
(3) Recording mode indicator (l 25)
≥XP SP LP EP (all on): FR mode (l 26)
(4) Scheduled recording indicator ( ) (l 28)
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
≥Disc recording and play counter
≥Scheduled recording end time
≥Miscellaneous messages, etc.
When it turns out that the unit cannot record a scheduled
recording program (e.g. there is no disc, etc.) in the period
between 2 minutes before the scheduled recording program
starts and the end of the scheduled recording program.
(5) Disc indicator
VHS
(1) Scheduled recording indicator ( ) (l 52)
On:
When a scheduled recording program is registered and
recordable tape is inserted.
(6) Channel position indicator
TRK:
GRP:
TTL:
PL:
Track number
Group number
Title number
Playlist number
Channel
Flashes:
When it turns out that the unit cannot record a scheduled
recording program (e.g. there is no tape, etc.) in the period
between 2 minutes before the scheduled recording program
(2) Recording mode indicator (l 51)
≥SP: When recording or playing in Normal mode.
≥LP: When playing in Long play mode.
≥EP: When recording or playing in Extra long play mode.
≥VP: When recording or playing in 5-time (Long play) mode.
(3) TV indicator
CH:
≥The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV].
(l 20)
(4) Remaining tape time indicator
(5) Tape operation status
≥The operation status of the unit, such as playback or fast-
forward, is displayed.
(6) Channel
(7) Tape indicator
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of January 2005. These may be subject to change.)
Only for U.S.A.: To order accessories, refer to “Accessory Purchases” on page 73.
Only for Canada: To order accessories, call the dealer from whom you have made your purchase.
∏ 1 AC power supply cord
∏ 1 75 ≠ coaxial cable
∏ 1 Remote control
∏ 2 Batteries for the remote
(K2CB2CB00006)
(K2KZ2BA00001)
(EUR7720KY0)
control
R6 size
≥For use with the unit only.
Do not use it with other
equipment. Also, do not
use cords belonging to
other equipment with the
unit.
∏ 1 Audio/Video cable
(U.S.A. only)
Product Registration Card
Please complete and return the included product registration
card, or register via the Internet at:
(K2KA6CA00001)
12
VQT0N92
Getting started
d
e
STEP 1 Connection
art
t
≥Please read “Precautions For Installation”. (l 3)
s
g
≥Before connection, turn off all equipment and read the appropriate operating instructions.
tin
Ge
∫ Connecting a TV and VCR
indicates included accessories.
indicates accessories not included.
Use a splitter if you also
want to connect the
Red
antenna to your VCR.
White
Yellow
Cable TV
TV
∫Connection (without Audio/Video cable)
Connect in numerical order 1 to 3.
cable on channel 3 or 4. It is possible to view the video
Outdoor
antenna
AUDIO IN
VHF/UHF
RF IN
picture on your TV in the same way that you watch TV
VIDEO IN
R
L
broadcasts.
Indoor antenna
≥After this connection, set the RF output channel “CH3”
or “CH4” (l 16).
∫ Connection (with Audio/Video cable)
Connect in numerical order 1 to 4.
≥After this connection, set the RF output channel “OFF”
(l 16).
Antenna cable
Splitter
3
Audio/Video cable
75 ≠ coaxial cable
1
1
2
2
RF IN
Y
P
B
PR
DVD/VHS COMMON OUT
R - AUDIO - L
VIDEO
COMPONENT VIDEO OUT
(480p/480i)
S
VIDEO
OPTICAL
R - AUDIO - L
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF OUT
R - AUDIO - L
DVD OUT
VIDEO
S
VIDEO
VHF/UHF
IN
1
To IN1
75 ≠ coaxial cable
Cooling fan
3
4
(AC 120 V, 60 Hz)
Audio/Video cable
Video cassette recorder
AC power supply cord
Connect to household AC outlet only
after all other connections are complete.
R
L
VIDEO
VHF/UHF
RF IN
AUDIO OUT OUT
≥If the antenna connector doesn’t match (l 14)
∫Connection examples with other equipment
∫Do not connect the unit through a video cassette
recorder
Amplifier (l 15)
Video camera (l 63)
Video signals sent through video cassette recorders will be affected
by copyright protection systems and the picture will not be shown
correctly on the TV.
TV
TV
From the AUDIO/VIDEO OUT terminal
or the DIGITAL AUDIO OUT terminal
The unit
VCR
VCR
The unit
The unit
To IN2 input terminals (front)
≥When connecting the unit to a TV with a built-in VCR, connect to
the input terminals on the TV, not the VCR.
For your reference
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables are sold separately
unless otherwise indicated
.
13
VQT0N92
Getting started
∫ Connecting a cable TV box/satellite receiver
≥You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming.
≥Consult your service provider regarding appropriate cable TV box or satellite receiver.
≥You can enjoy viewing cable TV or satellite TV programming.
≥You can record and view scrambled and unscrambled channels
simultaneously if connections are made as shown in the diagram
below.
TV
To AUDIO/VIDEO IN
To VHF/UHF RF IN
To AUDIO/VIDEO IN
Audio/Video cable
To VHF/UHF RF IN
Audio/Video cable
TV
The unit
RF IN
Y
P
B
PR
DVD/VHS COMMON OUT
R
R
-
-
AUDIO
-
L
VIDEO
RF IN
COMPONENT VIDEO OUT
(480p/480i)
S
VIDEO
Y
P
B
PR
OPTICAL
R
-
AUDIO
-
L
VIDEO
DVD/VHS COMMON OUT
R
-
AUDIO
-
L
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF OUT
COMPONENT VIDEO OUT
(480p/480i)
AUDIO
-
L
VIDEO
S
VIDEO
DVD OUT
S
VIDEO
IN
1
VHF/UHF
OPTICAL
R
-
AUDIO
-
L
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF OUT
R
-
AUDIO
-
L
VIDEO
S
VIDEO
The unit
Cable TV box
DVD OUT
IN
1
VHF/UHF
75 ≠ coaxial cable
Satellite receiver
75 ≠ coaxial cable
Cable TV
box
OUT
IN
or
OUT
IN
OUT
IN
IN
2-way
splitter
From antenna or
cable TV jack
OUT2 OUT1
IN
IN
OUT
From satellite dish antenna
Cable TV box
From cable TV jack
¢ For more information on connections (l 13)
∫ If the antenna connector does not match
1 Other antenna connections to the unit
1 Other antenna connections from the unit
to the TV
Use one of the following connections to suit your antenna lead.
≥If your TV has both lead and coaxial VHF terminals, use the lead
connection to minimize signal loss.
Use one of the following connections to suit the antenna terminals on
your TV. Refer to the TV’s operating instructions.
∫A single twin lead
from the antenna
∫A twin lead and coaxial plug terminal
300 to 75 ≠
VHF
UHF
transformer
VHF/UHF band separator
75 ≠ coaxial cable
(Flat) Twin lead
300 ≠ cable
To the unit’s
RF IN terminal
TV
∫A twin lead and a coaxial cable
∫A twin lead terminal
from the antenna
VHF
or
UHF
VHF/UHF band mixer
75 to 300 ≠ transformer
(Flat) Twin lead 300 ≠ cable
75 ≠ coaxial cable
TV
To the unit’s
(Round)
75 ≠ coaxial cable
RF IN terminal
∫2 twin lead terminals
VHF/UHF band separator
VHF
UHF
∫2 twin leads
from the antenna
75 ≠ coaxial cable
TV
VHF/UHF band mixer
∫Multiple antenna terminals
≥ Connect to one of the ANT terminals, then change the TV’s setting
(Flat) Twin lead 300 ≠ cable
as necessary.
To the unit’s
TV
RF IN terminal
300 to 75 ≠ transformer
Split out
ANT 1
75 ≠ coaxial cable
ANT 2
14
VQT0N92
Getting started
d
e
∫ Connecting an amplifier or system
∫ DVD output and DVD/VHS output
art
t
component
The unit has DVD/VHS COMMON output terminals and DVD output
terminals.
s
g
1 To enjoy multi-channel surround sound on
tin
DVD/VHS COMMON output
Ge
DVD-Video (digital connection)
DVD only
≥Connect an amplifier with a built-in Dolby Digital or DTS decoder.
(l 7)
Y
P
B
PR
DVD/VHS COMMON OUT
R - AUDIO - L
VIDEO
≥Change the settings in “Digital Audio Output”. (l 44)
≥You cannot use any amplifier with a DTS Digital Surround decoder
not suited to DVD.
≥Even if using this connection, output will be only 2 channels when
playing DVD-Audio
COMPONENT VIDEO OUT
(480p/480i)
OPTICAL
R - AUD
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R - AUDIO - L
DVD OUT
VIDEO
S
VIDEO
DVD output
DVD/VHS COMMON OUT
≥For DVD/VHS COMMON output terminals, both DVD and VHS
signals can be output.
(1) Rear panel of the unit
(2) Optical digital output terminal
(3) Optical digital audio cable
(not supplied)
(1)
Y
P
B
PR
R
-
AUD
COMPONENT VIDEO OUT
(480p/480i)
OPTICAL
A Insert fully, with this side
facing up. (Do not bend when
connecting.)
(2)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
DVD OUT
R
-
AUD
DVD OUT
≥This is the dedicated terminal to enjoy pictures played on DVD in
higher picture quality. (l below)
≥The DVD output terminals can only output the DVD signal. If your
TV is connected to the DVD output terminals, the VHS picture is
not displayed on your TV unless you select the TP channel (l 58).
(4) Optical digital input terminal
(5) Amplifier’s rear panel
(3)
A
∫ To enjoy even higher fidelity
(4)
1 Connection to the S-VIDEO IN terminal
OPTICAL IN
DVD only
(5)
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the TV.)
1 Connection to a stereo amplifier
(analog connection)
DVD only
TV
(1) Audio input terminals (L/R)
(1)
(2)
(2) S-Video input terminal
(3) Audio cable (not supplied)
A Red (R)
B White (L)
(4) S-Video cable (not
supplied)
(5) Rear panel of the unit
(6) Audio output terminals (L/R)
(7) S-Video output terminal
(1) Rear panel of the unit
(2) Audio output terminals (L/R)
(1)
AUDIO IN
VIDEO IN
R
L
S VIDEO IN
Y
P
B
PR
DVD/VHS COMMON OUT
-
AUDIO
-
VIDEO
R(2)L
(3) Audio cable (not supplied)
A Red (R)
COMPONENT VIDEO OUT
(480p/480i)
OPTICAL
GITAL AUDIO OUT
CM/BITSTREAM)
B White (L)
UDIO
VIDEO
S
VIDEO
DVD
(3)
(4) Audio input terminals (L/R)
(5) Amplifier’s rear panel
(4)
(3)
P
R
S COMMON OU
-
AUDIO
VIDEO
NENT VIDEO OUT
(480p/480i)
R
-
AUDIO
-
R
AU
VIDEO
S
VIDEO
(6)
DVD OUT
(5)
(7)
(4)
R
L
1 Connection to the COMPONENT VIDEO IN
AUDIO IN
(5)
terminals
DVD only
COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive output
(l
64) and provide a purer picture than the S-VIDEO OUT terminal.
≥Connect to terminals of the same color.
TV
(1) Component input terminals
(2) Audio input terminals (L/R)
(3) Component video cable
(not supplied)
(1)
(2)
AUDIO IN
COMPONENT
VIDEO IN
R
L
(4) Audio cable (not supplied)
A Red (R)
B White (L)
(5) Rear panel of the unit
(4)
(3)
(6) COMPONENT VIDEO OUT
terminals
(7) Audio output terminals (L/R)
Y
P
B
PR
S COMMON OUT
-
AUDIO
VIDEO
COMPONENT VIDEO OUT
(480p/480i)
AL
(6)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R
AU
VIDEO
S
VIDEO
(7)
DVD OUT
(5)
15
VQT0N92
Getting started
STEP 2 Plug-in Auto Tuning
The unit’s display
Each time you press the button:
CH 3 (Default setting) (# CH4 (# OFF
^-----------------------------------------------J
DVD/VHS POWER
TV
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
[3] Use [3, 4] to select the language and press
[ENTER].
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
[4] Press [ENTER] to start Plug-in Auto Tuning.
≥The unit then proceeds with Auto Clock Setting. The time is
displayed when Auto Clock Setting is finished.
Numeric
buttons
CH, W, X
Set Channels Automatically
Set Clock Automatically
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
Auto Clock Setting is complete.
1
Ch.
SLOW/
SKIP/INDEX
REW SEARCH FF
Set Channels Automatically
Proceeding .
4/4/2005 12:15 AM
DST............. On
Time Zone.... CST
.
.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
PLAY
1
1
1
FUNCTIONS
VHS MENU
≥DST, Daylight Saving Time, shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
S
RETURN
ADD/DLT
SCHEDULE
DISPLAY
STATUS
JET REW
l GMT j8
ADD/DLT
F.REC
REC
REC MODE DVD ERASE
CREATE
AST (Alaska Standard Time) l GMT j9
For other areas: xx hr
COPYING
CHAPTER
After plugging the unit into your household AC outlet and pressing
[Í, DVD/VHS POWER] to turn the unit on for the first time, the unit
assists you to set the on-screen language, and automatically tunes in
all the channels it can receive and sets the clock.
[5] Press [ENTER].
∫If the clock is an hour slower or faster than the actual
time
The unit automatically determines the type of transmission (airwaves
or cable) and puts them into channels as follows.
Select “j1” or “i1” in “Adjust Time Zone” in the SETUP menu
(l 46).
Band
Channel
2 to 13
∫If the unit couldn’t set the clock automatically
Set the time manually (l 46, “Set Clock Manually”).
VHF
Antenna Mode
(Airwaves)
∫To start Plug-in Auto Tuning again
UHF
14 to 69
2 to 13
VHF
Signal source, RF output channel, channel caption, and
guide channel settings for VCR Plusi system all revert to
the default values when you perform the procedure below.
Scheduled recording settings are also cleared.
CATV LOW BAND
CATV MID/SUPER BAND
CATV HYPER BAND
95 to 99
14 to 36
37 to 65
CableTV Mode
(Cable)
When the unit is on and stopped
unit for about 5 seconds.
66 to 94
100 to 125
ULTRA BAND
The unit turns off.
[2] Press [Í, DVD/VHS POWER] to turn the unit on.
Plug-in Auto Tuning starts.
SPECIAL CATV CHANNEL
1
Preparation
≥Turn on the TV and select the appropriate video input to suit the
connections to the unit. (Example: AV input, CH3 or CH4)
≥If you connect the unit through a cable TV box or satellite receiver
(l 14), tune to your local PBS for Auto Clock Setting to work.
If there is no local PBS, set the clock manually (l 46, “Set Clock
Manually”).
≥Press [DVD].
[1] Press [Í, DVD/VHS POWER].
[2] Press [CH, W, X] to
Select Language
Seleccione la Lengua
select an RF output
Sélection de Langue
channel number.
English
Español
Connection (without Audio/
Français
Video cable):
Select “CH3” or “CH4” which
displays the screen on the right.
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Connection (with Audio/Video
cable):
The unit’s display
Select “OFF”
16
VQT0N92
Getting started
d
e
∫ If Plug-in Auto Tuning fails
STEP 3 Channel settings
art
t
Preparation
≥Press [DVD].
s
g
∫ Guide channel settings for VCR Plusi
tin
system
[1] While stopped
Ge
®
Set these guide channels so you can use VCR Plusi system for
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
e.g., :
FUNCTIONS
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Station
name
Guide
channel°
Channel
number°°
Playback
DIRECT NAVIGATOR
PLAYLISTS
Channel setting
FLEXIBLE RECORDING
Schedule
SETUP
SCHEDULE
VCR Plus+
CBS
04
04
Unnecessary
2
1
3
DISC MANAGEMENT
Enter channel 15 next
to Guide Channel 33.
Dubbing
ENTER
DUBBING
HBO
33
15
Other Functions
Return
Enter channel 20 next
to Guide Channel 38.
Nickelodeon
38
20
[3] Select “SETUP” with [3, 4] and press [ENTER].
SETUP
Signal Source (RF IN)
CableTV
° Look up the guide channels for the stations in magazines.
Set Channels Automatically
°° Write down all the stations you can receive.
Channel Captions
Preset Channel Captions
Channel
Setup
Disc
≥If you have connected a cable TV box or satellite receiver, the
VCR Plus_ system does not work so you do not have to set the
guide channels.
Manual Channel Captions
VCR Plusi Ch. Setting
Video
[4] Select “Channel” with [3, 4] and press [2, 1].
Preparation
≥Press [DVD].
[5] Select “Signal Source (RF IN)” with [3, 4] and
press [ENTER].
[1] While stopped
SETUP
Signal Source (RF IN)
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
Antenna
CableTV
Channel
[3] Select “SETUP” with
SETUP
Signal Source (RF IN)
CableTV
[6] Select “Antenna” or “CableTV” with [3, 4] and
press [ENTER].
[7] Select “Set Channels Automatically” with
Set Channels Automatically
[3, 4] and press
[ENTER].
[4] Select “Channel” with
[3, 4] and press
[2, 1].
Channel Captions
Preset Channel Captions
Channel
Setup
Disc
Manual Channel Captions
VCR Plusi Ch. Setting
[3, 4] and press [ENTER].
Video
[8] Press [ENTER].
≥Auto Channel Setting starts. This takes a few minutes.
[5] Select “VCR Plusr Ch.
Setting” with [3, 4]
SETUP
VCR Plusi Ch. Settings
[9] Press [ENTER].
Guide Channel Cable Channel
---
---
125
1
and press [ENTER].
e.g., “Signal Source (RF IN)” is
set to “CableTV”.
Channel
SetUp
∫To cancel in the middle
Press [RETURN].
Disc
Video
∫To exit the screen
Press [RETURN].
---
---
2
3
Audio
Display
TV Screen
ENTER
∫ Adding and deleting channels
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[6] Use [3, 4] to select
the guide channel you
want to set and press
SETUP
VCR Plusi Ch. Setting
Guide Channel Cable Channel
---
---
4
5
Channel
SetUp
[1].
[1] Press the numeric buttons to select a channel.
---
Disc
6
≥When selecting the guide
channel, press and hold
[3, 4] to scroll up and down
the screen quickly.
Antenna Mode (Airwaves)
The unit’s display
Video
---
---
7
8
e.g.,
“5”:
“15”:
[0] )[5]
Audio
Display
TV Screen
[1] )[5]
ENTER
CableTV Mode (Cable)
[7] Use [3, 4] to select
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
the channel corresponding to the guide channel
and press [2].
≥To delete a number, press [CANCEL/RESET, ¢].
≥Repeat steps 5 and 6 to enter other channels.
≥You can also use [CH, W, X] to select a channel.
[2] Press [ADD/DLT].
[8] Press [ENTER].
e.g., The channel is deleted.
Channel 15 Deleted
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
17
VQT0N92
Getting started
1 Preset Channel Captions
DVD/VHS POWER
TV
TV, Í
≥Follow steps 1 to 4 of “Channel captions”.
[5] Select “Preset Channel Captions” with [3, 4]
and press [ENTER].
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
SETUP
VHS
DVD
TRACKING/V-LOCK
Preset Channel Captions
DVD
Caption Channel Number
---
---
GLOB
ABC
Channel
Setup
Numeric
buttons
Disc
AUDIO
Video
CANCEL/RESET
VCR Plus+
CM SKIP
---
---
PBS
CBS
Audio
Display
TV Screen
SLOW/
ENTER
SKIP/INDEX
REW SEARCH FF
DIRECT NAVIGATOR
TOP MENU
PFLUANYCTIONS
[6] Use [3, 4] to select the caption and press [1].
You can choose from the following captions.
FUNCTIONS
RETURN
VHS MENU
ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,
FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,
WB, TSN, DSC, GLOB
≥When selecting the caption, press and hold [3, 4] to scroll up
and down the screen quickly.
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
SCHEDULE
DISPLAY
STATUS
JET REW
[7] Use [3, 4] to select the channel corresponding
to the caption and press [2].
≥Channels are displayed only when they contain a station and if
captions have not been added manually.
Preparation
≥Press [DVD].
≥To delete the channel number, press [CANCEL/RESET, ¢].
∫ Channel captions
≥Repeat steps 6 and 7 as necessary.
[8] Press [ENTER].
You can use the preset captions, or manually enter new ones
yourself.
∫To return to the previous screen
Press [RETURN].
The captions you enter are used as channel names and displayed on
the Direct Navigator screen.
∫To exit the screen
Press [RETURN].
FUNCTIONS
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
SETUP
SCHEDULE
VCR Plus+
2
1
3
DISC MANAGEMENT
1 Manual Channel Captions
Functions” with [3, 4]
and press [ENTER].
Dubbing
ENTER
DUBBING
≥Follow steps 1 to 4 of “Channel captions”.
[5] Select “Manual Channel Captions” with [3, 4]
and press [ENTER].
[6] Use [3, 4] to select the channel and press [1].
≥Channels are only displayed if they contain a station and if
preset captions have not been added.
Other Functions
Return
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
SETUP
Signal Source (RF IN)
CableTV
Set Channels Automatically
Channel Captions
Preset Channel Captions
Channel
Setup
Disc
Manual Channel Captions
VCR Plusi Ch. Setting
[4] Select “Channel” with
[3, 4] and press
[2, 1].
[7] Use [3, 4] to select the first character and
Video
press [1].
≥You can choose from the following characters:
A to Z, 0 to 9, -, &, !, /, (space)
≥Go to the item you want to set next.
≥To delete the caption, press [CANCEL/RESET, ¢].
≥Repeat this step to enter the other characters.
SETUP
Manual Channel Captions
Channel Number Caption
----
----
6
8
Channel
Setup
AAAA
10
Disc
Video
----
----
12
23
Audio
Display
TV Screen
ENTER
[8] Use [2, 1] to return to the “Channel Number”
column.
≥Repeat steps 6 to 8 to enter other channels.
[9] Press [ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
18
VQT0N92
Getting started
d
e
STEP 4 Set up to match your TV and remote control
art
t
s
g
Preparation
≥Press [DVD].
∫ TV operation
To turn the TV on/off, change the TV input mode, select the TV
channel and change the TV volume by means of this remote control,
set the remote control as follows.
tin
Ge
∫ When other Panasonic products respond
to this remote control
Point the remote control at the TV
While pressing [Í POWER TV], enter the code
using the numeric buttons.
e.g., 01: press [0] > [1].
Change the remote control code on the main unit and on the remote
control (the two must match) if you place other Panasonic products
close together. When changing the remote control code, make sure
the two codes are same.
Manufacturer and Code No.
Use “1”, the factory set code, under normal circumstances.
PHILIPS (RC-5)
RCA
03
Panasonic
National
FUNCTIONS
[1] While stopped
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
01, 02
05
Press [FUNCTIONS].
[2] Select “Other
Functions” with [3, 4]
and press [ENTER].
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
QUASAR
SAMSUNG
SANYO
14, 18, 19
FLEXIBLE RECORDING
SETUP
SCHEDULE
VCR Plus+
FISHER
GE
10
10
2
1
3
DISC MANAGEMENT
05
SHARP
06, 07
08
Dubbing
ENTER
DUBBING
GOLDSTAR
HITACHI
JVC
15, 16, 17
SONY
Other Functions
Return
12
SYLVANIA
THOMSON
TOSHIBA
ZENITH
03
11
05
LG
15, 16, 17
09
[4] Select “Setup” with [3, 4] and press [2, 1].
[5] Select “Remote Control Code” with [3, 4] and
MAGNAVOX
MITSUBISHI
03
13
04
press [ENTER].
procedure until you find the code that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does
not allow control of your TV, this remote control is not compatible
with your TV.
[6] Use [3, 4] to select the code (1, 2 or 3) and
press [ENTER].
≥The code on the unit has been set.
[7] While pressing [ENTER], press and hold for
about 2 seconds the numeric button ([1], [2] or
[3]) corresponding to the code you selected in
step 6.
∫ Selecting TV type
You do not have to change the setting when connected to a 4:3
standard aspect TV that is not compatible with progressive output.
(l 64)
≥The code on the remote control has been set.
[8] Press [ENTER].
[1] While stopped
∫When the following indicator appears on the unit’s
display
Press [FUNCTIONS].
[2] Select “Other Functions” with [3, 4] and press
[ENTER].
[3] Select “SETUP” with [3, 4] and press [ENTER].
[4] Select “TV Screen” with [3, 4] and press
[2, 1].
[5] Select “TV Type” with [3, 4] and press
The unit’s remote control code
[ENTER].
Change the code on the remote control to match the main unit’s code
TV Type
SETUP
(l step 7).
4:3 TV
Aspect 4:3 & 480i
Aspect 4:3 & 480p
∫To return to the previous screen
Press [RETURN].
Channel
Setup
16:9 Widescreen TV
Aspect 16:9 & 480i
Aspect 16:9 & 480p
Disc
∫To exit the screen
Press [RETURN].
Video
Audio
Display
TV Screen
ENTER
≥Aspect 4:3/Aspect 16:9:
4:3
16:9
4:3 standard aspect TV
16:9 widescreen TV
≥480p/480i:
Select “480p” if the TV is compatible with progressive output.
[6] Use [3, 4] to select the item and press
[ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
19
VQT0N92
Getting started
The unit’s display
Each time you press the button:
CH 3 (Default setting) (# CH4 (# OFF
^-----------------------------------------------J
DVD/VHS POWER
TV
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
≥Set the RF output channel of the DVD Video Recorder to “OFF”
(RF OFF) when the DVD Video Recorder is connected to the
TV via the Audio/Video cable.
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
[3] Press [ENTER] to finish this setting.
CH, W, X
Numeric
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
:, 9
6, 5
PLAY
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
FUNCTIONS
3, 4, 2, 1
2;, ;1
ENTER
The clear picture
SUB MENU
RETURN
TIME SLIP
S
∫When you set the RF output channel to “CH3” or
“CH4”
SCHEDULE
DISPLAY
STATUS
JET REW
A picture is output on CH3 or CH4 from RF output.
REC
REC MODE DVD ERASE ADD/DLT
Press [VCR/TV] to switch the mode from TV to VCR, and vice
versa.
≥When the TV mode is selected, the “TV” indicator lights on the
unit’s display and you can watch TV.
CREATE
DUBBING
VHS DVD
VCR/TV
CHAPTER
VCR/TV
≥When the “TV” indicator does not light on, then VCR mode is
selected and you can watch images from the unit.
∫ Removing Interference
Connection (without Audio/Video cable) only
TV screen
Picture with interference
In some cases, interference (lines or patterning) or a very poor
picture may appear on the TV when the DVD Recorder is
connected. If this happens, follow the steps below to change
the video playback channel (RF output channel) to remove the
interference.
[1] Press [FUNCTIONS] for more than 5 seconds.
The RF output channel number is displayed on the unit display.
[2] Press [CH, W, X] to select a channel number
(CH3 or CH4).
≥(For example, if the original channel number was 3, enter 4.)
<Before Changing>
<Before Changing>
RF Output Channel
RF Output Channel
Press the channel up/down buttons
to select a RF Output Channel.
Press the channel up/down buttons
to select a RF Output Channel.
Ch.
3
Ch.
4
ENTER
ENTER
The unit’s display
The unit’s display
Indication when the RF output
channel is 3 (example)
Indication after changing the RF
output channel to 4 (example)
20
VQT0N92
DVD
Playback
DVD
d
e
Preparation
Starting play from where you stopped it
(Resume Function)
art
≥Turn on the TV and select the appropriate video input to suit the
connections to the unit.
≥Press [DVD].
t
s
g
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
tin
Ge
[1] During Play
Playing discs
Press [∫, STOP].
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a disc. (l 8)
≥Play stops and “PB” flashes on the unit’s
display (Excluding when playing from the
Direct Navigator and when playing a
playlist.). The unit memorizes the
position.
k
c
ba
ay
Pl
[3] Press [1, PLAY].
[2] Press [1, PLAY].
≥The disc tray closes and play begins.
(The unit takes some time to read the disc before play starts.)
≥Playback starts from the most recently recorded title.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Play starts from where you stopped it.
∫To cancel the resume function
Press [∫, STOP] several times, “PB”
disappears on the unit’s display.
≥Playback starts from the beginning of the disc.
[DVD-A] [DVD-V] [VCD] [CD]
(This function is also canceled when you turn
the unit off or the tray is opened.)
∫To stop play
Press [∫, STOP]. (l right, “Resume Function”)
≥The screen saver on the right may appear when
you stop play. Press [∫, STOP] again and you
can use the unit’s tuner to watch TV.
Screen saver
Fast forward and rewind — SEARCH
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
e.g., DVD-RAM
[DVD-A] [DVD-V] [VCD] [CD]
During Play
DVD-RAM
Press [6, SLOW/SEARCH] or
•
•
•
•
∫To pause play
Press [;, PAUSE]. (Press again to restart play.)
t2
Stereo
[5, SLOW/SEARCH].
≥There are 5 search speeds. Each press
increases the search speed.
∫ When a menu screen appears on the TV
[VCD]
≥Press [1, PLAY] to restart playback.
Press the numeric buttons to select an item.
For your reference
e.g.:
“5”: [0] )[5]
≥Sound is output only in the first level of fast forward. In the case of
DVD-Audio (except motion picture parts), CD and MP3, it is output
in all levels.
“15”: [1] )[5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and press [ENTER].
≥You can sometimes use the numeric buttons to select an item.
≥Depending on the disc, search may not be possible.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
Skipping
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
Note
During play or while paused
≥ If “ ” appears on the TV, the operation is prohibited by the unit
or disc.
Press [:, SKIP] or [9, SKIP].
≥Each press increases the number of skips.
Quick View (Play t1.3)
[RAM]
Slow-motion play
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] (Motion picture parts only) [DVD-V]
[-RW‹VR›] [VCD]
The play speed can be increased without distorting the audio.
During Play
Press and hold [1, PLAY].
While paused
DVD-RAM
Play
DVD-RAM
Play x1.3
Press [6, SLOW/SEARCH] or [5, SLOW/
SEARCH].
∫To return to normal speed
Press [1, PLAY].
≥When slow motion play is continued for about 5 minutes it pauses
automatically (excluding [DVD-A] [DVD-V] [VCD]).
≥There are 5 play speeds. Each press increases the play speed.
≥Press [1, PLAY] to restart playback.
≥[VCD] Forward direction ([5, SLOW/SEARCH]) only.
Frame-by-frame viewing
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] (Motion picture parts only) [DVD-V]
[-RW‹VR›] [VCD]
While paused
Press [2;] ([2]) or [;1] ([1]).
≥Each press shows the next or previous frame.
≥Press and hold to change in succession forward or backward.
≥Press [1, PLAY] to restart playback.
≥[VCD] Forward direction ([;1], [1]) only.
21
VQT0N92
Playback
DVD
CM Skip
DVD/VHS POWER
TV
POWER
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
You can skip approximately 1 minute with one press.
During play
Press [CM SKIP].
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
Displaying the TV image as a picture-in-
picture/Selecting an amount of time to
skip — Time Slip
CH, W, X
Numeric
buttons
AUDIO
AUDIO
CM SKIP
CANCEL/RESET
VCR Plus+
CM SKIP
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
SLOW/
SKIP/INDEX
REW SEARCH FF
Press [TIME SLIP] during play and the PIP (Picture-In-Picture) screen (TV
image) is displayed in the lower right part of the main screen. You can
watch both playback images and TV images at the same time. In the main
screen, you can also instantly access a scene you want to view by
specifying an amount of time you want to skip.
:, 9
PLAY
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
TOP MENU
[1] During play
Play
(1)
0 min
Press [TIME SLIP].
≥The PIP screen (TV images)
3, 4, 2, 1
ENTER
RETURN
TIME SLIP
SUB MENU
appears.
≥You can change the channel
being received by pressing
S
RETURN
CH8
(2)
SCHEDULE
DISPLAY
STATUS
JET REW
TIME SLIP
[CH, W, X].
You will hear the playback audio
of the main screen.
(1) Play images
(2) Currently receiving images
REC
REC MODE DVD ERASE ADD/DLT
CREATE
≥
DVD ERASE
CREATE CHAPTER
DUBBING
VCR/TV
CHAPTER
VHS
DVD
[2] While observing the time
indicator at the top right
Play
–5 min
Preparation
≥Press [DVD].
Press [3, 4] to set an
amount of time to skip
CH8
and press [ENTER].
≥Play skips the amount of time
you specified.
Direct play
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
You can play from the title, chapter or track you select.
≥The time indicator will go off after about 5 seconds, but will turn
on again when you set the time.
≥Press [3, 4] to alter in 1-minute units. Press and hold [3, 4]
to alter in 10-minute units.
During Play
Press the numeric buttons to select an item.
[CD] (MP3, JPEG and TIFF disc only)
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
∫To clear the PIP screen
Press [TIME SLIP].
[DVD-A]
For your reference
A group number can be specified while the screen saver (l 21) is
displayed.
e.g.:
≥The blue background does not appear on the PIP screen (l 45).
screen is being recorded.
“5”: [5]
≥This works only when stopped (screen saver is displayed) with
some discs.
≥Playing bonus groups
Create chapters
[RAM]
Some discs contain bonus groups. If a password screen appears
after selecting a group, enter the password with the numeric
buttons and press [ENTER]. For the password, refer to the disc’s
jacket, etc.
During play
Press [CREATE CHAPTER].
≥
Press [:, SKIP] or [9, SKIP] to skip to the start of a chapter.
≥You cannot activate this function when you are carrying out TIME
SLIP (l 27) or transfer (dub).
Erasing a title that is being played
[RAM] [-R] [-RW‹V›] [+R]
Once title is erased, it cannot be restored. Make certain before
proceeding.
Erase Title
[1] During Play
Press [DVD ERASE].
[2] Press [2] to select
Time remaining after erase 0 : 58(SP)
Corresponding playlist chapters will be erased.
Erase
Cancel
“Erase” and press
ENTER
For your reference
≥You cannot erase while recording or transferring (dubbing).
≥[-R] [+R] Available space does not increase after erasing.
≥[-RW‹V›] Disc space increases only when the last recorded title is
erased.
22
VQT0N92
Playback
DVD
Regarding MP3 and still pictures (JPEG/TIFF)
≥Compatible formats: ISO9660 level 1 or 2 (except for extended
formats) and Joliet
≥Maximum number of files (tracks) and folders (groups)
recognizable: 999 files (tracks) and 99 folders (groups)
≥This unit is compatible with multi-session but reading or play of
the disc may take time if there are a lot of sessions.
≥Operation may take time to complete when there are many files
(tracks) and/or folders (groups) and some files (tracks) may not
display or be playable.
≥The display order on this unit may differ from how the order is
displayed on a computer.
≥Depending on how you create the disc (writing software), files
(tracks) and folders (groups) may not play in the order you
numbered them.
Changing audio during play
≥You can select audio types depend on the recording medium.
[RAM] [-RW‹VR›] [VCD] (l 47)
Stereo# Mono L# Mono R
^--------------------------------------}
DVD-RAM
Play
e.g.: [RAM]
“Stereo” is
selected.
k
c
Stereo
ba
[RAM] [-RW‹VR›] [When playing an SAP broadcast recorded on DVD-
RAM, DVD-RW (DVD Video Recording format)]
MAIN () SAP
[DVD-A] [DVD-V] (l 40)
This allows you to change items like the audio channel number and
ay
Pl
the sound track language.
≥This unit is not compatible with packet-write format.
≥Depending on the recording, some items may not be playable.
Regarding MP3
1 ENG
Î Digital 3/2.1ch
Soundtrack
≥File format: MP3
Files must have the extension “.mp3” or “.MP3”.
≥Bit rates: 32 kbps to 320 kbps
e.g.: English is the selected language. [DVD-V]
Note
≥Sampling frequency: 16 kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/
48 kHz
≥This unit is not compatible with ID3 tags.
Regarding still pictures (JPEG/TIFF)
≥File format: JPEG, TIFF (non-compressed RGB chunky format)
Files must have the extension “.jpg”, “.JPG”, “.tif” and “.TIF”.
≥Number of pixels: 34 k 34 to 6144 k 4096
(Sub sampling is 4:2:2 or 4:2:0)
≥Operation may take time to complete when playing TIFF format
still pictures.
≥If you cannot change the audio type when you have used only an
optical digital cable for connection, set “Dolby Digital” to “PCM”
(l 44). Alternatively, you may connect to an amplifier with an
Audio/Video cable and change the input on the amplifier to suit the
connection.
2
and still pictures
[CD]
≥MOTION JPEG is not supported.
The screen shown below is displayed when you insert a disc
containing MP3 files and still pictures (JPEG/TIFF).
Using menus to play MP3 discs
[CD]
The unit plays MP3 files recorded on CD-R/RW designed for audio
recording that are finalized (l 64) on a computer. Files are treated
as tracks and folders are treated as groups.
Press [ENTER].
Playback mode is set to MP3.
If you want to play picture (JPEG),
select JPEG Menu from Menu in FUNCTIONS.
∫To play MP3
Refer to “Using menus to play MP3 discs”.
(l right)
∫To play still pictures
ENTER
Refer to “To show JPEG Menu”. (l 24)
[1] During stop or play
Press [TOP MENU].
≥The file list appears.
≥You can play MP3 and still pictures (JPEG/TIFF) on this unit by
making folders as shown below. However depending on how
you create the disc (writing software), play may not be in the
order you numbered the folders.
Selected Group No. and Name
No.
1
Total
1
Group
Track
Menu
:
MP3_MUSIC
≥English alphabetical characters and Arabic numerals are
displayed correctly. Other characters may not be displayed
correctly.
≥When the highest level folders are “DCIM” folders, they are
displayed first on the tree.
G:
G
T
1
1
Tree
001 Both Ends Freezing
The Group Number
T:
Track Number in the Group
Total:
Total
1/ 24
No.
0
–
9
Prev.
Next
Selected Track Number/
Total Track Number
Structure of MP3 folders
Prefix with 3-digit numbers
in the order you want to play
them.
Structure of still pictures
(JPEG/TIFF)
ENTER
Page 001/016
Files inside a folder are
displayed in the order they
were updated or taken.
Root
[2] Press [3, 4] to select the track and press
[ENTER].
≥Play starts on the selected track.
Tree
≥“
” indicates the track currently playing.
P0000001.jpg
P0000002.jpg
001 A
≥You can also directly select the track with the numeric buttons.
e.g.:
002 C
001track.mp3 (B)
002track.mp3
003track.mp3
“6”: [0] )[0] )[6]
“10”: [0] )[1] )[0]
∫Using the tree screen to find a group (l 24)
P0000003.jpg
P0000004.jpg
P0000005.jpg
002 A
001track.mp3
003 A
003 C
002track.mp3
003track.mp3
004track.mp3
P0000006.jpg
004 C
P0000007.jpg
∫To show other groups
P0000008.jpg
P0000009.jpg
001track.mp3
002track.mp3
003track.mp3
Press [:] (Prev.) or [9] (Next) to show other pages.
≥After listing all the tracks in one group, the list for the next group
appears.
P0000010.jpg
P0000011.jpg
P0000012.jpg
Order of play
Order of play
AFolder = Group
BFile = Track
CFolder
∫To exit the file list
Press [TOP MENU] or [RETURN].
23
VQT0N92
Playback
DVD
JPEG Menu screen
∫To show other pages
Press [:] (Previous) or [9]
(Next) to show other pages.
JPEG Menu
CD (JPEG)
Picture (JPEG) View
DVD/VHS POWER
TV
POWER
Folder
08 8 10/27 Mon
Í
≥
You can also press [
3
,
4
,
2
,
1] to
VOLUME
CH
INPUT SELECT TV/VIDEO
select “Previous” or “Next” and press
[ENTER] to show other pages.
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
Previous
Page 01/01
Next
∫To exit the JPEG Menu
Play
Press [TOP MENU] or [RETURN].
CH, W, X
AUDIO
Numeric
buttons
1 Playing a still picture
≥Make sure that JPEG Menu screen appears by following the steps
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
“To show JPEG Menu”.
SLOW/
SKIP/INDEX
REW SEARCH FF
Use [3, 4, 2, 1] to select a still picture you want
:, 9
PLAY
to watch and press [ENTER].
≥You can also select a still picture by entering a 3-digit with the
numeric buttons.
∫
;
FUNCTIONS
VHS MENU
DIRECT NAVIGATOR
TOP MENU
TOP MENU
e.g.:
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
FUNCTIONS
≥You can watch the still pictures in order by pressing [2]
(previous) or [1] (next).
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
SUB MENU
To rotate a still picture
[1] Press [SUB MENU].
[2] Select “Rotate Right” or “Rotate Left” with [3, 4]
and press [ENTER].
Rotate Right
SCHEDULE
STATUS
JET REW
DISPLAY
Rotate Left
STATUS
Zoom in
REC
REC MODE
DVD ERASE ADD/DLT
CREATE
ENTER
REC MODE
µ
≥Rotation information will not be stored.
COPYING
VCR/TV
CHAPTER
VHS
DVD
To zoom in/out
[1] Press [SUB MENU].
[2] Select “Zoom in” with [3, 4] and press [ENTER].
∫ Using the tree screen to find a group
≥To return the picture to its original size, press [3, 4] to select
“Zoom out” in step [2] and press [ENTER].
≥When zooming in, the still picture may be cut off.
≥The enlargement information will not be stored.
≥The “Zoom in/Zoom out” function is only available for still
[1] While the file list is displayed (l 23)
Press [1] while a track is highlighted to display
the tree screen.
Tree
Selected Group Number/Total
Group Number
≥If the group has no track, “– –”
is displayed as group number.
Menu
G
1/ 15
3
G
T
1
1
MP3_MUSIC
001 My favorite
001 Brazillian pops
002 Chinese pops
003 Czech pops
004 PC Files
005 Japanese pops
006 Swedish pops
001 Momoko
Total
1/ 24
9
To show the picture properties
[1] Press [STATUS] twice.
3/24 10:15 PM
No.
≥Press [STATUS] again, the
properties disappear.
0
–
Date 3/23/2005
No. 100/123
002 Standard Number
001 Piano solo
002 Vocal
3
ENTER
Shooting Date
1 Start Slide Show/Slide Interval
≥Make sure that JPEG Menu screen appears by following the steps
“To show JPEG Menu”.
≥A folder which has no MP3 files is indicated in black. You
cannot select groups with no MP3 files.
≥Press [2, 1] to jump layers in the tree screen.
[2] Press [3, 4] to select a group and press
[ENTER].
You can display still pictures one by one with constant interval.
JPEG Menu
CD (JPEG)
Picture (JPEG) View
[1] Select “Folder” with [3]
and press [SUB MENU].
[2] Select “Start Slide
Show” with [3, 4] and
press [ENTER].
≥The file list for the selected group appears.
Folder
08 8 10/27 Mon
∫To return to the file list
Press [RETURN].
Start Slide Show
Slide Interval
To show JPEG Menu
[CD] [with MP3 files and still pictures (JPEG/TIFF]
To Change the display timing
[1] Select “Slide Interval” with [3, 4] in step 2 and press [ENTER].
[2] Press [2, 1] to select the desired timing (0 to 30 seconds) and
press [ENTER].
FUNCTIONS
VOL_200411291118
Playback Mode: MP3
DVD
CD(MP3/JPEG)
[1] Press [FUNCTIONS].
[2] Select “MENU” with [3,
4] and press [ENTER].
[3] Select “JPEG Menu”
with [3, 4] and press
[ENTER].
Menu
Playback
MENU
Menus
1 To select the still pictures in another folder
≥Make sure that JPEG Menu screen appears by following the steps
“To show JPEG Menu”.
Select a playback mode from
the following menus.
MP3 Menu
JPEG Menu
You can display still pictures one by one with a constant interval.
[CD] [with still pictures (JPEG/TIFF) only]
[1] Select “Folder” with [3]
AB
JPEG Menu
CD (JPEG)
Select Folder
Press [TOP MENU].
and press [ENTER].
[2] Select the folder with
[3, 4] and press
F
1/1
12_02_2005
[ENTER].
ASelected folder no./Total folder no.
BYou cannot select folders that
contain no compatible files.
ENTER
24
VQT0N92
Recording
DVD
Recording TV programs
[RAM] [-R] [-RW‹V›] [+R]
∫ Recording modes and approximate
recording times
≥You can record up to 99 titles on a disc (49 titles [+R]).
≥It is not possible to record digital broadcasts that allow “One time
≥Recording will take place on open space on the disc. Data will not
be overwritten.
(Unit: hour)
DVD-RAM
Single-sided Double-sided
DVD-R
DVD-RW
+R
k
c
ba
(4.7 GB)
(9.4 GB)
ay
(4.7 GB)
Pl
≥If there is no space left on the recording disc, you will need to erase
unwanted titles (l 22, 33) or use a new disc.
XP (High quality)
SP (Normal)
1
2
2
1
2
4
8
g
When recording to DVD-R, DVD-RW (DVD-Video format) or +R
≥When recording MTS broadcasts
- If you do not connect a cable TV box
LP (Long play)
EP (Extra long play)
4
4
in
rd
8 (6°)
16 (12°)
8 (6°)
o
c
(l 44).
- If you connect a cable TV box
Re
≥Depending on the content being recorded, the recording times may
become shorter than indicated.
Select “Main” or “SAP” on the cable TV box.
≥The aspect ratio of the recorded image will be 4:3.
recorded using this unit on another playback source, the
disc must first be finalized (l 31).
XP
SP
LP
Preparation
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Select an audio type you want to record. (l right below)
≥Press [DVD].
EP (6H)°
EP (8H)
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
Recording time
[2] Insert a disc. (l 8)
the SETUP menu. (l 43)
The sound quality is lower compared to other recording modes
≥When using a DVD-RAM for the first time with the unit, format it
to ensure accurate recording (l 31, “Format Disc”).
[3] Press [CH, W, X] to select the channel.
when using “EP (8H)”.
To select with the numeric
buttons:
Note
Antenna Mode
(Airwaves)
When recording to DVD-RAM using EP (8H) mode, play may not be
possible on DVD players that are compatible with DVD-RAM. In this
case use EP (6H) mode.
e.g.,
“5”:
“15”:
[0] )[5]
[1] )[5]
FR (Flexible Recording model 26):
≥You can set FR mode when transferring (dubbing) or programming
scheduled recordings.
CableTV Mode (Cable)
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
Selecting audio to record
[RAM]
Preparation
≥Press [DVD].
[4] Press [REC MODE]
to select the
recording mode
(XP, SP, LP or EP).
Press [AUDIO].
Stereo # SAP # Mono
^----------------------------}
Remaining time on the disc
[5] Press [¥, REC] to
Stereo:
Main audio (stereo). If the broadcast is “Mono_SAP”,
audio will be monaural even if you select Stereo
mode.
start recording.
≥You cannot change the
channel or recording
mode during recording.
You can change them
SAP:
Secondary audio program (SAP). If recorded in SAP,
main audio is also recorded.
Mono:
Main audio (monaural). Select “Mono” if reception is
poor during a stereo broadcast.
while recording is paused, but the material is recorded as a
separate title.
No disc
e.g., “Stereo” is selected.
“((” appears when the unit is receiving
∫To pause recording
Press [;, PAUSE]. (Press again to restart recording.)
≥Title is not split into separate titles.
CH 12
the audio type you selected.
((Stereo
≥You can also press [¥, REC] to restart recording.
≥If you change the sound setting while recording, the recorded
∫To stop recording
sound will also change.
Press [∫, STOP].
[-R] [-RW‹V›] [+R]
≥Recorded as 1 title until the position where stopped.
≥It takes about 30 seconds for the unit to complete recording
management information after recording finishes. [-R] [-RW‹V›] [+R]
Select the audio (Main or SAP) in “Select MTS” in
the SETUP menu. (l 44)
25
VQT0N92
Recording
DVD
Flexible Recording mode (FR)
[RAM] [-R] [-RW‹V›] [+R]
DVD/VHS POWER
TV
CH, W, X
POWER
VOLUME
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) with the
best picture quality.
CH
INPUT SELECT TV/VIDEO
TV/VIDEO
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
Using “FLEXIBLE RECORDING” is convenient in these kind
of situations.
≥When the amount of free space on the disc makes selecting an
appropriate recording more difficult
≥When you want to record a long program with the best picture
quality possible
Numeric
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
e.g., Recording a 90 minute program to disc
If you select XP mode, the program will not fit one disc.
PLAY
1
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
A second disc is necessary for
30 minutes of the program.
DIRECT
NAVIGATOR
FUNCTIONS
4.7 GB
DVD-RAM
4.7 GB
DVD-RAM
3, 4, 2, 1
If you select SP mode, the program will fit one disc.
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
However there will be 30 minutes
remaining disc space
TIME SLIP
STATUS
4.7 GB
DVD-RAM
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
DUBBING
VHS DVD
VCR/TV
CHAPTER
VCR/TV
If you select “FLEXIBLE RECORDING” the
program will fit one disc perfectly.
4.7 GB
DVD-RAM
Preparation
≥Press [DVD].
Preparation
≥Press [DVD].
≥Select the channel to record.
Specifying the time when recording will
stop
While recording
Press [¥, REC] to select the recording time.
≥On the main unit, press [¥, REC] on the DVD.
FUNCTIONS
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
Functions” with [3, 4]
and press [ENTER].
[3] Select “FLEXIBLE
RECORDING” with
[3, 4] and press
[ENTER].
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Playback
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
Schedule
SETUP
SCHEDULE
VCR Plus+
2
1
3
DISC MANAGEMENT
Dubbing
ENTER
DUBBING
The unit’s display
Each time you press the button:
Counter (Cancel) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------- OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
Other Functions
Return
FLEXIBLE RECORDING
Record in FR mode.
Maximum rec. time
1 Hour 23 Min.
1 Hour 23 Min.
For your reference
≥This does not work during scheduled recording or Flexible
Recording.
≥Recording stops and the set time is cleared if you press [∫, STOP].
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Set recording time
[4] Press [3, 4, 2, 1] to
Start
Cancel
set the recording time.
≥You can also set the
recording time with the
numeric buttons.
≥Maximum recording time is 8 hours.
[5] Select “Start” with [3, 4, 2, 1] and press
Watching the TV while recording
Preparation
≥Connection (without Audio/Video cable)
- Make sure that the TV indicator is lit on the unit’s display. If it is
not lit, press [VCR/TV] to light it.
[ENTER].
≥Recording starts.
∫To exit the FLEXIBLE RECORDING window without
recording
Press [RETURN].
≥Connection (with Audio/Video cable)
- Press [TV/VIDEO] to change the input mode to “TV”.
∫To stop recording in the middle
Press [∫, STOP].
Press TV’s [CH, W, X] to select the desired TV
channel.
∫To show the time remaining until recording finishes
Press [STATUS].
≥It is displayed in units of minutes.
For your reference
≥You can also do this if the unit is making a scheduled recording.
≥The recording is unaffected.
DVD-RAM
Rec. 1:22
CH 12
Stereo
Remaining
time
For your reference
≥During a Flexible Recording, all recording mode indicators light up
on the unit’s display.
≥It is not possible to change the channel or recording mode while
Flexible Recording is paused.
26
VQT0N92
Recording
DVD
∫ TIME SLIP
Playing while you are recording
Press [TIME SLIP] while recording; play starts from 30 seconds
previous to that moment. You can start play from even earlier by
specifying an amount of time to skip on the time indicator.
[RAM]
Preparation
≥Press [DVD].
[1] While recording or
Play
0 min
Hint
(1)
scheduled recording
Press [TIME SLIP].
≥The PIP screen (images
being currently recorded) is
displayed.
≥On the main screen, play
starts from 30 seconds
previous to that moment.
≥You will hear the playback
audio.
≥Sound is not output while fast-forwarding.
∫ Chasing play
You can start play from the beginning of the title while continuing to
record it.
Rec.
(2)
(1) Play images
While recording or scheduled recording
Press [1, PLAY].
(30 seconds before)
(2) Currently recording
g
in
≥Play starts while recording proceeds.
rd
o
c
For your reference
Re
≥Play cannot be started until at least 2 seconds after recording
starts.
[2] While observing the time
indicator at the top right
Play
–5 min
Press [3, 4] to set an
amount of time to skip
and press [ENTER].
≥Play skips the amount of time
you specified.
∫ Simultaneous recording and play
You can play a title previously recorded while you are recording
another title.
Rec.
[1] While recording or scheduled recording
≥The time indicator will go off after about 5 seconds, but will turn
on again when you set the time.
≥Press [3, 4] to alter in 1-minute units. Press and hold [3, 4]
to alter in 10-minute units.
Press [DIRECT NAVIGATOR]. (l 33)
¥: Currently recording
DIRECT NAVIGATOR Title View
DVD-RAM
∫To show the play images in full
Press [TIME SLIP].
07
08
09
10 10/25 MON
8
10/25 MON
8
10/26 TUE
≥Press [TIME SLIP] to return to the PIP screen.
-
-
-
-
-
-
For your reference
≥The image on the PIP screen may be distorted or flicker depending
on the scene. However, this does not affect the image recorded.
[2] Use [3, 4, 2, 1] to select a title and press
[ENTER].
≥ Play starts while recording proceeds.
∫To stop play and recording
[1] Press [∫, STOP]. Play stops.
∫To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
(Wait 2 or more seconds.)
[2] Press [∫, STOP]. Recording stops.
For your reference
≥You cannot stop recording with [∫, STOP] during scheduled
then [ENTER] within 5 seconds.
- You can also press and hold [∫] on the main unit for 3 or
more seconds to stop scheduled recording.
≥During simultaneous recording and play, you cannot edit or erase
titles with the Direct Navigator or playlists.
≥Even if you start play while the unit is on standby for scheduled
recording, recording starts when the time you set is reached.
∫ Playing/Recording VHS while recording
You can play or record tapes while recording. The recording will not
be affected.
≥VHS playback (l 49)
≥VHS recording (l 51)
- When a tuner channel is being recorded on DVD, you can only
record the same channel on VHS.
27
VQT0N92
Recording
DVD
Scheduled Recording
DVD/VHS POWER
TV
POWER
You can enter up to 16 programs a month in advance.
VOLUME
CH
INPUT SELECT TV/VIDEO
Preparation
≥Release protection (disc l 30, cartridge l 30) [RAM].
≥Insert a disc (l 8) and confirm there is sufficient empty space for
recording on it (l 47).
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
≥Press [DVD].
Numeric
buttons
AUDIO
∫ Using VCR Plus_ system
VCR Plusi
CANCEL/RESET
VCR Plus+
CM SKIP
®
SLOW/
Entering the PlusCode numbers is an easy way of scheduled
SKIP/INDEX
REW SEARCH FF
recording. You can find these codes in TV listings in newspapers and
magazines.
PLAY
∫
≥When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the scheduled recording
manually (l 29).
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
[1] Press [VCR Plus_].
3, 4, 2, 1
4:00 LP
7/13 Tue 12:53 PM
Remaining Recording Time
ENTER
VCR Plus+
SUB MENU
RETURN
TIME SLIP
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
SCHEDULE
REC MODE
[2] Press the numeric buttons to enter the
PlusCode number.
REC
REC MODE DVD ERASE ADD/DLT
CREATE
COPYING
VHS
VCR/TV
CHAPTER
DVD
≥Press [2] to move back to correct a digit.
[RAM] [-R] [-RW‹V›] [+R]
[3] Press [ENTER].
Preparation
4:00 LP
Remaining Recording Time
SCHEDULED
RECORDING
7/13 Tue 12:53 PM
≥Press [DVD].
Channel
39
Date
On
Off
Mode
7/20 Tue 10:00 PM 11:00 PM SP
Cautions for using scheduled recording
on DVD and VHS
time.
≥Scheduled recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot be
outputted to the TV.
Title Name
≥Confirm the program and correct it if necessary using [3, 4,
≥When “XP” is displayed in the unit’s display, the recording
mode automatically changes to “FR” in order to prevent loss of
recording when there is not enough space. Change to “XP”
mode if you want to set scheduled recording using “XP” mode.
number. Reenter the PlusCode number.
∫Scheduled recording for TV programs cannot be
executed on both DVD and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
both DVD (l 29) and VHS (l 53) Scheduled Recording List
screens.
≥To enter the name of the program
Press [2, 1] to select “Title Name” and press [ENTER]
(l 32).
[4] If the program is correct
Press [ENTER].
When the scheduled recording settings overlap:
≥When the start time of both scheduled recordings is the same, the
scheduled recording of DVD has priority.
≥“ ” lights on the unit’s display.
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULED LIST screen (l 29).
≥Repeat steps 1–4 to program other recordings.
≥When the same tuner channels are specified in scheduled
recordings on both DVD and VHS, only one scheduled recording
can be started.
≥When the interval between the first scheduled recording and the
second scheduled recording on DVD is 1 minute or less as shown
below, the second scheduled recording on DVD has priority over
the scheduled recording on VHS even if its start time is later than
the scheduled recording on VHS.
[5] Press [RETURN].
∫To stop recording while a program is working
Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the DVD of the main unit for 3
or more seconds to stop recording.
1 minute
Note
Refer to Note in Manual programming (l 29).
DVD
2 CH
VHS
4 CH
10 CH
When the scheduled recording settings of DVD and VHS are
overlapped, the setting of DVD takes priority.
≥“ ” lights on the unit’s display of both sides in the standby mode.
When the recording starts, “ ” on the recording side (DVD side)
remains lit and the “ ” on the other side (VHS side) starts flashing.
28
VQT0N92
Recording
DVD
∫ Manual programming
Check, change or delete programs
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before scheduled
recording starts.
Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
Preparation
[1] Press [SCHEDULE].
≥Press [DVD].
≥Make sure “New Scheduled Recording” is selected.
[1] Press [SCHEDULE].
4:00 LP
7/13 Tue 12:57 PM
SCHEDULE
LIST
Remaining Recording Time
4:00 LP
New Scheduled
Recording is
selected.
SCHEDULE
LIST
Remaining Recording Time
7/13 Tue 12:57 PM
Off ModeCheck
39 N7/e6wTSUcEhe2d0u:l0e0dPRMec2o1rd:0in0gPM SP OK
No Channel Date
On
Off ModeCheck
No Channel Date
01
On
01
39 7/ 20 Tue 10:00 PM 11:00 PM SP OK
New Scheduled Recording
B
A
[2] Press [ENTER] to move and change the items
Icon explanations (A)
¥ Currently recording
using [3, 4, 2, 1].
g
in
4:00 LP
Remaining Recording Time
SCHEDULED
RECORDING
rd
7/13 Tue 12:53 PM
o
c
W
Programs are overlapped. Recording of the program with the
later start time starts when the earlier program finishes
recording.
Channel
Date
On
:
Off
:
Mode
Re
Title Name
n
F
X
You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
The disc was full. (not enough space)
The TV program may not be recorded due to copy-protect.
Recording stopped (Dirty disc, etc.)
≥You may use the numeric buttons to enter “Channel”, “Date”,
“On”, and “Off”.
≥Channel (Program Position/TV Station Name)
≥Date
Check (B)
OK:
You can also make a daily or weekly program.
Each daily or weekly program is counted as one program.
The time increases or decreases in 30-minute increments if
you hold down the button.
Recordable
# (Date): The last day of daily or weekly recording.
!:
It may not be possible to record because:
≥the disc is write-protected
≥there is no more space left
≥Mode (Recording mode)
≥the number of possible titles has reached its maximum.
You can also press [REC MODE] to change the recording
mode.
[2] Press [3, 4] to select the program.
≥You may also select program by inputting a 2-digit number
using the numeric buttons.
XP,.SP,.LP,.EP,.FR,.XP... (l 25)
≥Title Name
Press [2, 1] to select “Title Name” and press [ENTER]
(l 32).
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
≥Press [2, 1] to move to the preceding or following page.
[3] Press [ENTER] when you have finished making
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
changes.
≥“ ” lights on the unit’s display.
≥“Invalid Entry” is displayed when you enter the wrong item.
Reenter the item.
The scheduled recording setting screen appears.
≥Make sure that the scheduled recording has been programmed
correctly on the SCHEDULE LIST screen (l right).
≥To continue programming:
[4] If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
Select “New Scheduled Recording” and repeat steps 2–3.
[5] Press [RETURN].
[4] Press [RETURN].
For your reference
≥Programs that failed to record are not deleted from the list
immediately (indicated in gray), but are deleted from the list
automatically at 4 a.m. 2 days later.
≥During scheduled recording, you can change the end time as long
as the recording mode is not “FR”.
∫To stop recording while a program is working
Press [∫, STOP], then press [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the DVD of the main unit for 3
or more seconds to stop recording.
Note
≥When the unit is carrying out a scheduled recording, you may
utilize playback.
≥When the disc is not inserted, the disc is full or a non-recordable
disc is inserted, the warning message appears because scheduled
recording is disabled.
≥“ ” flashes when the unit cannot perform scheduled recording
carefully.
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥When recording more than one program in a row, for DVD-RAM the
first few seconds, and for DVD-R, DVD-RW (DVD-Video format) or
+R about the first 30 seconds of all programs from the second one
onwards will not be recorded.
≥If you set “DST” (Daylight Saving Time) to “ON” when manually
setting the clock (l 46), scheduled recording may not work when
summer switches to winter and vice versa.
29
VQT0N92
Editing
DVD
1 Disc Name
[RAM] [-R] [-RW‹V›] [+R]
DVD/VHS POWER
TV
POWER
VOLUME
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
CH
INPUT SELECT TV/VIDEO
[4] Select “Disc Name” with [3, 4] and press
[ENTER].
Refer to “Entering text” (l 32).
≥The disc name is displayed in the FUNCTIONS window.
name is displayed on the Top Menu.
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
FUNCTIONS
VHS MENU
3, 4, 2, 1
123
FUNCTIONS
DVD
Cartridge Protec
Disc Protection
ENTER
DVD-RAM
SUB MENU
RETURN
TIME SLIP
Playback
DIRECT NAVIGATOR
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
1 Disc Protection
[RAM]
DISC MANAGEMENT
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
[RAM] [-R] [-RW‹V›] [+R]
This allows you to protect the whole disc from accidental erasure and
release disc protection.
Preparation
≥Release protection (disc l right, cartridge l right). [RAM]
≥Insert a disc (l 8).
≥Press [DVD].
[4] Select “Disc Protection” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
≥To protect
[1] While stopped
e.g., DVD-RAM
Press [FUNCTIONS].
FUNCTIONS
DVD
Cartridge Protection Off
Disc Protection Off
Disc Protection
DVD-RAM
DISC
MANAGEMENT
DVD-RAM
Titles
Used
7
Free
0 : 42 (SP)
[2] Select “Other
Functions” with [3, 4]
and press [ENTER].
[3] Select “DISC
MANAGEMENT” with
[3, 4] and press
[ENTER].
Playback
DIRECT NAVIGATOR
PLAYLISTS
Setup disc protection.
0 : 58
FLEXIBLE RECORDING
Note: Protected discs cannot be renamed
or have their contents changed,
but can still be re-formatted.
Schedule
SETUP
SCHEDULE
VCR Plus+
Disc Name
Disc Protection
Erase All Titles
Format disc
2
1
3
DISC MANAGEMENT
On
Yes
No
Dubbing
ENTER
DUBBING
Other Functions
Return
ENTER
≥To release protection
e.g., DVD-RAM
e.g., DVD-R
Disc Protection
DISC
MANAGEMENT
DISC
DISC
MANAGEMENT
DVD-R
Titles
Used
7
Free
0 : 42 (SP)
MANAGEMENT
Cancel disc protection.
Note: All write restrictions will
be released.
DVD-RAM
Titles
Used
7
Free
0 : 42 (SP)
Titles
Used
7
Free
0 : 42 (SP)
0 : 58
DVD-RAM
0 : 58
0 : 58
Disc Name
Disc Protection
Erase All Titles
Format disc
Disc Name
Disc Protection
Erase All Titles
Format disc
Disc Name
Off
Off
Playback will start with: Top Menu
Finalize
Yes
No
ENTER
ENTER
ENTER
[4] Use [3, 4] to select a desired item and press
∫Protection of cartridge disc
You can protect the contents of your discs.
≥With the write-protect tab in the protect
position, you cannot record to, edit, or erase
from the disc.
[ENTER].
You can change various settings.
≥After this operation, follow the desired operation.
PROTECT
∫To stop in the middle
Press [RETURN].
1 Erase All Titles
[RAM]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
Once erased, the recorded contents are lost and cannot be restored.
Make certain before proceeding.
[4] Select “Erase All titles” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
[6] Select “Start” with [2] and press [ENTER].
≥A message appears when finished.
[7] Press [ENTER].
Note
≥Erasing all video titles will result in all playlists also being erased.
≥Erase does not work if one or more titles are protected.
30
VQT0N92
Editing
DVD
1 Format Disc
1 Finalize
[RAM] [-RW‹V›] [-RW‹VR›]
[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
≥Make selection from “Playback will start with:” before finalizing the
disc. (l below left)
Formatting erases all contents (including computer data), and
they cannot be restored. Check carefully before proceeding.
The contents are erased when you format a disc even if you have
set protection.
You can play DVD-R, DVD-RW (DVD-Video format) or +R on
compatible DVD players by finalizing it on the unit, effectively making
it into DVD-Video that complies with DVD-Video standards.
The menu you create with the unit can also be used on DVD players.
[4] Select “Format disc” with [3, 4] and press
[ENTER].
[4] Select “Finalize” with [3, 4] and press
[ENTER].
[5] Select “Yes” with [2] and press [ENTER].
Format Disc
[5] Select “Yes” with [2] and press [ENTER].
e.g., DVD-RAM
Finalize
Formatting the disc will erase all contents.
This will take approximately 1 minute.
Do you want to continue?
Finalizing will take approximately
Do you want to continue? (Required for
playback on compatible DVD players.)
≤
minutes.
Yes
No
Yes
No
[6] Select “Start” with [2] and press [ENTER].
Format Disc
[6] Select “Start” with [2] and press [ENTER].
Finalize
g
Protected contents will also be erased.
Are you sure you want to continue?
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
You will be unable to record on this disc
once it is finalized.
tin
Ed
Start
Cancel
Are you sure you want to continue?
Start
Cancel
≥Formatting starts.
≥A message appears when formatting is finished.
≥Finalizing starts.
Note
≥You cannot cancel finalizing.
≥Formatting normally takes a few minutes; however it may take
up to a maximum of 70 minutes ([RAM]).
≥A message appears when finalizing is finished.
Note
≥Do not disconnect the AC power supply cord while
formatting. This can render the disc unusable.
≥Finalizing takes about 15 minutes.
≥Do not disconnect the AC power supply cord while
finalizing. This can render the disc unusable.
[7] Press [ENTER].
[7] Press [ENTER].
To stop formatting [RAM]
Press [RETURN].
≥You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
Note
≥You can only finalize DVD-R, DVD-RW (DVD-Video format) or +R
that were recorded on the unit.
Note
≥When finalizing a high-speed recording compatible disc, it may take
longer than displayed on the confirmation screen (approximately
4 times).
≥When a disc has been formatted using this unit, it may not be
possible to use it on any other equipment.
≥You can format DVD-RW only as DVD-Video format on this unit.
≥The disc cannot be formatted if the write protect tab (l 30) is
switched to “PROTECT”. Release the protection to continue.
≥The message “Unable to format” appears when trying to format
discs the unit cannot use.
≥After finalizing
- The disc becomes play-only and you can no longer record or edit
it. [-R] [+R]
- You can record and edit the disc after formatting (l left) although
it becomes play-only after finalizing. [-RW‹V›]
- DVD-R, DVD-RW (DVD-Video format) or +R finalized on the unit
may not be playable on other players depending on the condition
of the recording.
1 Playback will start with:
[-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “DISC MANAGEMENT”.
- There is a pause of several seconds between titles and chapters
during play.
- Titles are divided into about 5-minute chapters°.
° This time varies greatly depending on the condition and mode
of recording.
Select whether to show the top menu after finalizing the disc. Do this
before finalizing the disc.
[4] Select “Playback will start with:” with [3, 4]
and press [ENTER].
[5] Use [3, 4] to select a desired item and press
≥Visit Panasonic’s homepage for more information about DVDs.
For U.S.A.:
http://www.panasonic.com/playDVD-R
[ENTER].
Playback will start with:
Top Menu
First Title
≥Top Menu: The top menu appears first.
≥First Title: The disc content is played without displaying the
top menu.
31
VQT0N92
Editing
DVD
[2] Use [3, 4, 2, 1] to select the character you
want to enter and press [ENTER].
Repeat this step to enter other characters.
≥To erase a character
DVD/VHS POWER
TV
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
Press [3, 4, 2, 1] to select the character in the name field
and press [;, PAUSE].
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
≥Using the numeric buttons to enter characters
e.g., entering the letter “R”.
5
6
7
8
J
K
N
Q
U
L
O
R
V
Numeric
buttons
7
7
(1)Press [7] to move to the 7th row.
(2)Press [7] twice to highlight “R”.
(3)Press [ENTER].
7
M
P
T
AUDIO
S
CANCEL/RESET
VCR Plus+
CM SKIP
≥To enter space
SLOW/
SKIP/INDEX
REW SEARCH FF
Press [CANCEL/RESET, ¢] and press
[ENTER].
:, 9
PLAY
∫
≥Save/recall phrased (l below)
;
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
[3] After you have finished naming
DIRECT NAVIGATOR
Press [∫, STOP].
The title is entered and the screen disappears.
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
∫To cancel in the middle
Press [RETURN].
≥Characters will not be saved.
S
RETURN
SUB MENU
SCHEDULE
DISPLAY
STATUS
JET REW
∫To save phrases
You can save frequently used phrases and recall them later.
Maximum number of saved phrases: 20
Entering text
Maximum number of characters per phrase: 20
≥After entering the phrase (step 1–2, “Entering text”)
[1] Press [3, 4, 2, 1] to select “Phrase Save” and press
≥You can also press [9, SKIP] to select “Phrase Save”.
[2] Press [2, 1] to select “Save” and press [ENTER].
≥Press [RETURN] to cancel.
[RAM] [-R] [-RW‹V›] [+R]
You can give names to recorded titles, etc.
The maximum number of characters:
[RAM]
≥Title
≥Title (scheduled recording)
≥Playlist
≥Disc
Characters
44
64
64
∫To recall a saved phrases
[1] Press [3, 4, 2, 1] to select “Phrase List” and press
[-R] [-RW‹V›] [+R]
≥Title
≥Disc
Characters
[ENTER].
44
40
≥You can also press [:, SKIP] to select “Phrase List”.
[2] Press [3, 4, 2, 1] to select the phrase to be recalled and
press [ENTER].
Note
≥If a name is long, only part of it is displayed on the title list (l 33)
and the playlist screen (l 37).
∫To erase saved phrases
[1] Press [3, 4, 2, 1] to select “Phrase List” and press
Preparation
[ENTER].
≥Insert a recorded disc.
[2] Press [3, 4, 2, 1] to select the phrase to be erased.
[3] Press [SUB MENU] to show “Erase Phrase” and press
[ENTER].
≥Release protection (Disc l 30, title l 34, cartridge l 30). [RAM]
≥Press [DVD].
[1] Show Enter Name screen.
Refer to the following pages regarding display of the Enter Name
Screen.
[4] Press [2, 1] to select “Erase” and press [ENTER].
[5] Press [RETURN].
≥Title
(l 34)
≥Title (scheduled recording)
≥Disc
≥Playlist
(l 28, 29)
(l 30)
(l 38)
For your reference
If you enter a long name, only part of it is shown in the TOP MENU
after finalization (l 31). When entering a title name, the name that
will appear in the TOP MENU can be previewed in “Top Menu
Preview (Finalized Disc)” window. [-R] [-RW‹V›] [+R]
Name field: shows the text you have entered
Title Name
_
Title Name
_
Top Menu Preview
1
2
3
4
1
A
D
G
2
B
E
H
3
C
F
I
4
5
a
d
g
6
b
e
h
7
c
f
8
i
/
9
j
l
$
0
(Finalized Disc)
1
2
3
4
5
6
7
8
9
0
1
A
D
G
J
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
6
b
e
7
c
f
8
i
/
9
j
l
$
0
%
&
i
fl
d
g
j
%
&
h
k
i
fl
O
[
L
O
R
V
Y
?
l
N
]
@
_
;
π
Erase
m
n
o
M
P
T
Phrase Save
S
p
t
q
u
x
'
r
s
{
(
)
-
v
}
W
.
Z
!
w
"
y
:
z
;
|
\
Set
^
`
Space
ENTER
32
VQT0N92
Editing
DVD
Using the Direct Navigator
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
∫ Editing titles with SUB MENU button
Press [DIRECT NAVIGATOR] and the list of titles recorded (Title
View) is shown. You can play and edit a desired title.
Note
≥Once erased, divided or shortened, the title cannot be restored to
its original state. Make certain before proceeding.
For your reference
≥You cannot edit during recording or transferring (dubbing), etc.
≥The maximum number of items on a disc:
Preparation
- Title:
99 ([+R] 49 titles)
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
- Chapter: Approximately 1000 ([+R] Approximately 254)
(Depends on the state of recording.)
[1] Press [DIRECT NAVIGATOR].
Erase Title
∫ Selecting recorded titles to play
Preparation
≥Insert a disc that has been recorded on.
≥Press [DVD].
[2] Use [3, 4, 2, 1] to select a desired
Properties
Edit Title
title.
≥“To show other pages”, l below
View Chapters
[3] Press [SUB MENU].
[1] Press [DIRECT NAVIGATOR].
[4] Use [3, 4] to select a desired item
and press [ENTER].
DIRECT NAVIGATOR Title View
DVD-RAM
-
-
≥After this operation, follow the desired operation.
07
08
g
10 10/25 Mon
8
10/25 Mon
∫To stop in the middle
-
-
-
-
-
-
Ed
Press [RETURN].
For your reference
Previous
Page 02/02
Next
≥When the title is protected (l 34), some items are not accessible.
Release the protection to access the inaccessible items. [RAM]
Play
Select Previous
Next
SUB MENU
[2] Use [3, 4, 2, 1] to select the title you want to
1 Erase Title
[RAM] [-R] [-RW‹V›] [+R] (Multiple editing is possible. l below)
watch and press [ENTER].
≥Play starts.
≥You can also select titles by entering a 2-digit number with the
numeric buttons.
≥Follow steps 1 to 3 of “Editing titles with SUB MENU button”.
Once title is erased using this procedure, it cannot be retrieved.
Check the title carefully before erasing to ensure it isn’t one you want
to keep.
e.g.:
“5”: [0] )[5]
“15”: [1] )[5]
≥If you enter a number larger than the total number of titles, the
last title is selected.
≥“To show other pages” l lower right
[4] Select “Erase title” with
Erase Title
[3, 4] and press
Time remaining after erase 0 : 58(SP)
[ENTER].
[5] Select “Erase” with [2]
Corresponding playlist chapters will be erased.
Erase
Cancel
∫To clear the title list
Press [RETURN].
and press [ENTER].
ENTER
For your reference
≥Direct Navigator screen icons
For your reference
≥The disc’s available recording time may not increase after erasing
short titles.
≥The available recording space on DVD-R or +R does not increase
when you erase titles.
≥Available recording space on a DVD-RW (DVD-Video format)
increases only when the last recorded title is erased. It does not
increase if other title are erased.
: Title protected
: Copy-protected so it was not recorded.
t: Unable to play
¥: Currently recording
: Title with “One time only recording” restriction (l 64, CPRM)
1 Properties
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥Follow steps 1 to 3 of “Editing titles with SUB MENU button”.
Title information (e.g., date and
time) is shown.
Properties
Football
01
[4] Select “Properties” with
[3, 4] and press
[ENTER].
No.
Date
Ch.
Start
Rec.
1:02 PM
(
)
12/ 7/2005 Tue
12
1:00 SP
ENTER
Various operations
∫To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
≥You can also press [:, SKIP] or [9, SKIP] to show other
pages.
∫Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
A check mark appears. Press [;, PAUSE] again to cancel.
33
VQT0N92
Editing
DVD
For your reference
Titles will be erased even if they are protected if you format the disc
DVD/VHS POWER
TV
POWER
with DISC MANAGEMENT (l 31).
VOLUME
CH
INPUT SELECT TV/VIDEO
11 Shorten Title
[RAM]
≥Follow steps 1 to 3 of “Edit Title”.
OPER
SELECT
ATION
VHS
DVD
DVD
TRACKING/V-LOCK
SLOW/
SKIP/INDEX
REW SEARCH FF
PLAY
:, 9
You can remove unnecessary parts of the title such as commercials.
[4] Select “Shorten Title”
DIRECT NAVIGATOR Shorten Title
1
DVD-RAM
with [3, 4] and press
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
08
Play
Start
End
[ENTER].
DIRECT NAVIGATOR
Next
[5] Press [ENTER] at the
start point and end
point of the section
you want to erase.
(l 35, “For quicker editing”)
Exit
3, 4, 2, 1
0:43.21
ENTER
Start
End
SUB MENU
TIME SLIP
- -:- -.- -
- -:- -.- -
S
ENTER
SUB MENU
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
Shorten Title
[6] Select “Exit” with [3,
4] and press [ENTER].
[7] Select “Erase” with [2]
and press [ENTER].
Time remaining after erase
0 : 58(SP)
Corresponding playlist chapters will be erased.
Erase Cancel
1 Edit Title
You can perform various kinds of title editing.
Preparation
∫To erase another part of the same title
After setting the point in “Start” and “End”, select “Next” in step 5 and
perform step 7, then repeat steps 5–7.
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
For your reference
≥You may not be able to specify start and end points within
3 seconds of each other.
≥The disc’s available recording time may not increase after erasing
short parts of titles.
1] to select a desired title.
≥“To show other pages” l 33
≥“Multiple editing” l 33
[2] Press [SUB MENU].
e.g.: DVD-RAM
Title Name
Setup Protection
Cancel Protection
Shorten Title
11 Change Thumbnail
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
[3] Select “Edit Title” with [3, 4] and
press [ENTER].
[4] Use [3, 4] to select a desired item
You can change the image to be shown as a thumbnail picture in the
Title View.
and press [ENTER].
Change Thumbnail
Divide Title
≥
The editing screen for the selected item appears.
DIRECT NAVIGATOR Change Thumbnail
[4] Select “Change
DVD-RAM
∫To return to the previous screen
Press [RETURN].
Thumbnail” with
[3, 4] and press
[ENTER].
08
;
Change
Exit
∫To exit the screen
Press [RETURN].
0:00.00
[5] Press [1, PLAY] to
play.
Start play and select
the thumbnail position.
Change
0:00.00
11 Title Name
[RAM] [-R] [-RW‹V›] [+R]
≥Follow steps 1 to 3 of “Edit Title”.
ENTER
[6] Press [ENTER] at the
point you want to
display.
[4] Select “Title Name” with [3, 4] and press
[ENTER].
(l 35, “For quicker editing”)
≥To change to another point in the same title:
- Select “Change” with [3, 4] and press [1, PLAY] and then
repeat step 6.
Refer to “Entering text”. (l 32)
11 Setup Protection/Cancel Protection
[7] Select “Exit” with [3, 4] and press [ENTER].
[RAM] (Multiple editing l 33)
≥Follow steps 1 to 3 of “Edit Title”.
≥The thumbnail picture will be changed at this point.
You can prevent accidental erasure of titles by setting and canceling
the write-protection.
[4] Select “Setup Protection” or “Cancel
Protection” with [3, 4] and press [ENTER].
[5] Select “Yes” with [2] and press [ENTER].
Setup Protection
DIRECT NAVIGATOR
DVD-RAM
Set title protection.
07
Set up Protection:
The padlock mark
appears.
Yes
No
10 10/25 Mon
- -
ENTER
Cancel Protection
DIRECT NAVIGATOR
DVD-RAM
Cancel title protection.
Yes No
07
Cancel Protection:
The padlock mark
disappears.
10 10/25 Mon
- -
ENTER
34
VQT0N92
Editing
DVD
11 Divide Title
11 Erase Chapter
[RAM]
[RAM] (Multiple editing l 33)
≥Follow steps 1 to 3 of “Edit Title”.
≥Follow steps 1 to 5 of “View Chapters”.
You can divide a selected title into two. You must be careful when
dividing a title because it cannot be recovered after the procedure.
Once erased, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
[4] Select “Divide Title”
DIRECT NAVIGATOR Divide Title
[6] Select “Erase Chapter” with [3, 4] and press
DVD-RAM
with [3, 4] and press
[ENTER].
[5] Press [ENTER] at the
point you want to divide
[ENTER].
08
;
Preview
Divide
Exit
Erase Chapter
0:00.05
Erase chapter from the title?
Corresponding playlist chapters will also be erased.
Divide
the title.
(l lower right, “For quicker
editing”)
≥To change the point to
divide:
- Select “Divide” with [3, 4]
and press [1, PLAY], and
then repeat steps 5–7.
0:00.05
ENTER
Erase
Cancel
Divide Title
11 Create Chapter
Once divided, this title
cannot be recombined.
[RAM]
≥Follow steps 1 to 5 of “View Chapters”.
Divide
Cancel
[6] Select “Create Chapter” with [3, 4] and press
[ENTER].
g
[7] Press [ENTER] at the point you want to divide.
[7] Select “Divide” with [2] and press [ENTER].
tin
(l below, “For quicker editing”)
≥The title is divided at that point.
Ed
≥Repeat this step to divide at other points.
DIRECT NAVIGATOR Create Chapter
DVD-RAM
∫To check the division point
By selecting “Preview” in step 5 and pressing [ENTER], play will begin from
08
PLAY
Create
10 seconds prior to the division point to 10 seconds after the division point.
For your reference
Exit
0:43.21
≥The divided titles retain the name of the original title. They also
retain the CPRM property (l 64) of the original.
≥Video and audio just before and after the division point will be
momentarily cut out.
≥It is not possible to carry out “Divide” in the following cases:
- When the resulting part(s) are extremely short.
- When the total number of titles is more than 99.
[8] Select “Exit” with [4] and press [ENTER].
Note
≥A short portion of the recording just after the creation point may be
lost.
For your reference
1 View Chapters
[RAM] [-R] [-RW‹V›] [+R]
≥The divided titles retain the name of the original title. They also
retain the CPRM property (l 64) of the original.
≥It is not possible to carry out “Create” when the resulting part(s) are
extremely short.
[1] Press [DIRECT NAVIGATOR] and use [3, 4, 2,
1] to select a desired title.
≥“To show other pages” l 33
[2] Press [SUB MENU].
11 Combine Chapters
[RAM]
e.g.: DVD-RAM
[3] Select “View Chapters” with [3, 4]
≥Follow steps 1 to 5 of “View Chapters”.
and press [ENTER].
Erase Chapter
Create Chapter
Combine Chapters
[6] Select “Combine Chapters” with [3, 4] and
press [ENTER].
[4] Select a desired chapter with [
3
,
4
,
2,
1].
≥To start play l Press [ENTER].
[7] Select “Combine” with [2] and press [ENTER].
≥To edit l Follow the steps below.
View Titles
≥The selected chapter and next chapter are combined.
[5] Press [SUB MENU].
[6] Select a desired item with [3, 4]
Combine Chapters
Selected Chapter
Following Chapter
001
002
and press [ENTER].
Combine chapters.
Title/Chapter
Combine
Cancel
Programs are recorded as a single title consisting of one chapter.
Title
ENTER
11 View Titles
Chapter
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Start
End
≥Follow steps 1 to 5 of “View Chapters”.
[ENTER].
You can divide a title into multiple chapters. [RAM]
(l 22, “Create chapters”, l right “Create Chapter”)
Title
You go back to Title View.
Chapter
Chapter
Chapter
Chapter
≥You can change the order of chapters and create a playlist.
[RAM]
For quicker editing
≥Use search (l 21), Time Slip (l 22) or slow-motion (l 21) to
find the desired point.
≥Press [:, SKIP] or [9, SKIP] to skip to the end of a title.
≥Titles are divided into chapters about 5 minutes after finalizing
(l 31). [-R] [-RW‹V›] [+R]
35
VQT0N92
Editing
DVD
∫ Creating playlists
[RAM]
DVD/VHS POWER
TV
POWER
Preparation
≥Release protection (disc l 30, cartridge l 30)
VOLUME
CH
INPUT SELECT TV/VIDEO
≥Press [DVD].
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
FUNCT
IONS
[1] While stopped
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Press [FUNCTIONS].
[2] Select “Other
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
Numeric
buttons
FLEXIBLE RECORDING
SETUP
SCHEDULE
VCR Plus+
AUDIO
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
[3] Select “PLAYLISTS”
with [3, 4] and press
[ENTER].
CANCEL/RESET
VCR Plus+
CM SKIP
Dubbing
DUBBING
SLOW/
ENTER
Other Functions
Return
SKIP/INDEX
REW SEARCH FF
PLAY
∫
≥The Playlist View appears.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
PLAYLISTS
DVD-RAM
PlayList View
FUNCTIONS
-
-
-
-
-
-
-
3, 4, 2, 1
Create
ENTER
-
-
-
-
-
SUB MENU
RETURN
TIME SLIP
S
RETURN
SUB MENU
Previous
Page 01/01
Next
SCHEDULE
DISPLAY
STATUS
JET REW
Play
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[4] Select “Create” with [3, 4, 2, 1] and press
DVD ERASE
COPYING
VHS
[ENTER].
VCR/TV
CHAPTER
DVD
[5] Use [2, 1] to select the source title and press
[4].
PLAYLISTS
DVD-RAM
Create
Using playlist
[RAM]
01
4
10/25 Mon
Source Title
01
Page 01/01
02
You can create a playlist by gathering your favorite chapters (l 35)
Page 001/001
Source Chapter
001
002
003
from your recordings. You can also play and edit the created playlist.
≥When you want to select all chapters in the title, use [2, 1] to
select the source title and press [ENTER], then skip to step 7.
≥Repeat steps 5–7 to add other titles or chapters.
Playlist
Title
Title
Chapter Chapter
[6] Use [2, 1] to select the chapter you want to
add to a playlist and press [ENTER].
≥Press [3] to cancel.
Chapter
Chapter
Chapter
001/001
Source Chapter
001
002
003
Insert position
Page 001/001
≥You can also create a new chapter in the source title.
Press [SUB MENU] to select “Create Chapter” and press
[ENTER] (l 35, “Create Chapter”).
Playlist
Chapter
Chapter
[7] Use [2, 1] to select the position to insert the
≥Editing playlists doesn’t modify titles.
≥Playlists are not recorded separately so this doesn’t use much
capacity.
chapter and press [ENTER].
Chapters in Playlists
Chapters in Playlists
001
001/001
≥The maximum number of items on a disc:
- Playlists: 99
ENTER
ENTER
Press RETURN to exit.
SUB MENU
- Chapters in play lists:
≥The chapter is registered in the playlist.
≥Repeat steps 6–7 to add other chapters.
Approximately 1000 (Depends on the state of recording.)
≥To select other source titles, press [3] several times to return
to step 5.
≥If you exceed the maximum numbers of items for a disc, all the
items entered will not be recorded.
[8] Press [RETURN].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
36
VQT0N92
Editing
DVD
∫ Playing playlists
∫ Using playlist to edit playlists/chapters
[RAM] [-RW‹VR›] (Play only)
Preparation
≥Create playlists. (l 36)
≥Press [DVD].
[RAM] [-RW‹VR›] (Properties only)
Preparation
≥Create playlists. (l 36)
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
[1] While stopped
Press [FUNCTIONS].
[1] While stopped
[2] Select “Other Functions” with [3, 4] and press
Press [FUNCTIONS].
[ENTER].
[2] Select “Other Functions” with [3, 4] and press
[3] Select “PLAYLISTS” with [3, 4] and press
[ENTER].
[ENTER].
[3] Select “PLAYLISTS” with [3, 4] and press
PLAYLISTS
Playlist View
08
[ENTER].
DVD-RAM
07
-
-
[4] Use [3, 4, 2, 1] to select a
Erase Playlist
10/25 Mon 0:30
10/25 Mon 0:01
Create
playlist.
≥“To show other pages” l 33
Properties
-
-
-
-
-
-
Edit
[5] Press [SUB MENU].
[6] Use [3, 4] to select a desired item
View Chapters
Previous
Page 02/02
Select
Next
Previous
Play
SUB MENU
Next
g
and press [ENTER].
[4] Use [3, 4, 2, 1] to select a playlist and press
Ed
[ENTER].
∫To return to the previous screen
Press [RETURN].
≥Chapters are not displayed if you have not yet created a playlist
with the disc.
∫To exit the screen
Press [RETURN].
≥You can also select a playlist from the Playlist View by entering
a 2-digit number with the numeric buttons.
e.g.:
“5”: [0] )[5]
1 Erase Playlist
[RAM] (Multiple editing l 33)
“15”: [1] )[5]
≥If you enter a number larger than the total number of playlists,
the last playlist is selected.
≥Follow steps 1 to 5 of “Using playlist to edit playlists/chapters”.
≥“To show other pages” l 33
[6] Select “Erase Playlist” with [3, 4] and press
[ENTER].
∫To stop playlist play
Press [∫, STOP]. (The Playlist View screen appears.)
[7] Select “Erase” with [2] and press [ENTER].
≥The playlist is erased.
∫To return to the previous screen
Erase Playlist
Press [RETURN].
Erase playlist?
∫To exit the screen
Press [RETURN].
ENTER
∫To erase a playlist during play
[1] Press [DVD ERASE].
≥A confirmation message will be displayed.
[2] Use [2] to select “Erase” and press [ENTER].
≥Once a playlist has been erased, it cannot be restored. Check
carefully before proceeding.
≥Even if you erase the playlist, the original title is not erased.
For your reference
≥You can use fast-forward, fast-rewind, pause, and slow-motion
while playing chapters just as you can during normal play.
1 Properties
[RAM] [-RW‹VR›]
≥Follow steps 1 to 5 of “Using playlist to edit playlists/chapters”.
[6] Select “Properties” with [3, 4] and press
[ENTER].
Playlist information (e.g., date and length) is shown.
Properties
Dinosaur
No.
Chapters
03
004
Date
Length
11/15/2005 Tue
0:05.51
ENTER
37
VQT0N92
Editing
DVD
1 Edit
[RAM]
DVD/VHS POWER
TV
POWER
VOLUME
CH
You can perform various kinds of playlist editing.
INPUT SELECT TV/VIDEO
Preparation
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
≥Create playlists (l 36).
≥Release protection (disc l 30, cartridge l 30).
≥Press [DVD].
DVD
Numeric
buttons
FUNCT
IONS
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
AUDIO
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
CANCEL/RESET
VCR Plus+
CM SKIP
FLEXIBLE RECORDING
SETUP
SCHEDULE
VCR Plus+
SLOW/
SKIP/INDEX
REW SEARCH FF
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
[3] Select “PLAYLISTS”
with [3, 4] and press
[ENTER].
Dubbing
DUBBING
PLAY
∫
1
ENTER
Other Functions
Return
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
FUNCTIONS
≥Chapters are not displayed if you have not yet created a playlist
3, 4, 2, 1
on the disc.
ENTER
SUB MENU
RETURN
TIME SLIP
[4] Use [3, 4, 2, 1] to select a playlist.
≥“To show other pages” l 33
[5] Press [SUB MENU],
S
SUB MENU
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
Erase Playlist
Properties
Edit
Create
Copy
then select “Edit”
with [3, 4] and press
[ENTER].
Playlist Name
Change Thumbnail
View Chapters
[6] Use [3, 4] to select a
desired item and
press [ENTER].
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN].
11 Create
11 Change Thumbnail
≥Follow steps 1 to 5 of “Edit”.
≥Follow steps 1 to 5 of “Edit”.
You can change the image to be shown as a thumbnail picture in the
Playlist View.
[6] Select “Create” with [3, 4] and press [ENTER].
Refer to “Creating playlists”, steps 5–8. (l 36)
PLAYLISTS
Change Thumbnail
[6] Select “Change
Thumbnail” with [3,
4] and press [ENTER].
[7] Press [1, PLAY] to
play.
DVD-RAM
11 Copy
≥Follow steps 1 to 5 of “Edit”.
08
;
Change
(Multiple editing l 33)
Exit
0:00.00
Start play and select
the thumbnail position.
Change
0:00.00
[7] Select “Copy” with [2] and press [ENTER].
[8] Press [ENTER] at the
point you want to
display.
Copy
ENTER
Copy this playlist?
Copy
Cancel
(l 35, “For quicker editing”)
≥To change to another point in the same title:
- Select “Change” with [3, 4] and press [1, PLAY], and then
repeat step 8.
ENTER
11 Playlist Name
≥Follow steps 1 to 5 of “Edit”.
[9] Select “Exit” with [3, 4] and press [ENTER].
≥The displayed scene is changed at this point.
[6] Select “Playlist Name” with [3, 4] and press
[ENTER].
Refer to “Entering text”. (l 32)
38
VQT0N92
Editing
DVD
11 Create Chapter
1 View Chapters
[RAM]
≥Follow steps 1 to 7 of “View Chapters”.
[RAM] [-RW‹VR›] (Play only)
≥Follow steps 1 to 4 of “Edit”.
You can play/edit the chapters in a playlist.
[8] Select “Create Chapter” with [3, 4] and press
[ENTER].
[5] Press [SUB MENU], and select “View Chapters”
with [3, 4] and press [ENTER].
[6] Use [3, 4, 2, 1] to select a desired chapter.
≥You can also select a chapter from the chapter view by
entering a 3-digit number with the numeric buttons.
[9] Press [ENTER] at the point you want to divide.
(l 35, “For quicker editing”)
PLAYLISTS
Create Chapter
Play
DVD-RAM
Create
08
e.g.:
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
Exit
≥If you enter a number larger than the total number of chapters,
the last chapter is selected.
0:43.21
≥Editing chapters in a playlist does not modify the source titles
and source chapters.
≥“To show other pages” l 33
ENTER
≥Repeat this step to divide at other points.
[10] Select “Exit” with [4] and press [ENTER].
[7] Press [SUB MENU].
Add Chapter
[8] Use [3, 4] to select a desired item
Move Chapter
Note
and press [ENTER].
Create Chapter
g
≥A short portion of the recording just after the creation point may be
lost.
Combine Chapters
Erase Chapter
tin
Ed
For your reference
View Playlists
≥The divided titles retain the name of the original title. They also
retain the CPRM property (l 64) of the original.
≥It is not possible to carry out “Create” when the resulting part(s) are
extremely short.
∫To play a chapter
Press [ENTER] after step 5.
11 Combine Chapters
[RAM]
≥Follow steps 1 to 7 of “View Chapters”.
∫To stop chapter play
Press [∫, STOP]. (The Chapter View screen appears.)
11 Add Chapter
[RAM]
≥Follow steps 1 to 7 of “View Chapters”.
[8] Select “Combine Chapter” with [3, 4] and
press [ENTER].
[9] Select “Combine” with [2] and press [ENTER].
[8] Select “Add Chapter” with [3, 4] and press
[ENTER].
Refer to “Creating playlists”, steps 5–8. (l 36)
Combine Chapters
Selected Chapter
Following Chapter
001
002
Combine chapters.
Combine
11 Move Chapter
Cancel
[RAM]
ENTER
≥Follow steps 1 to 7 of “View Chapters”.
11 Erase Chapter
[RAM]
≥Follow steps 1 to 7 of “View Chapters”.
[8] Select “Move Chapter” with [3, 4] and press
[ENTER].
[9] Use [3, 4, 2, 1] to select the position to insert
(Multiple editing l 33)
Once erased, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
the chapter and press [ENTER].
≥The chapter is moved and inserted before the highlighted
chapter.
[8] Select “Erase Chapter” with [3, 4] and press
PLAYLISTS
Move Chapter
DVD-RAM
08
10/25 Mon 0:01
002
[ENTER].
sss
sss
001
003
[9] Select “Erase” with [2] and press [ENTER].
≥Even if you erase the chapter, the original title is not erased.
Erase Chapter
sss
sss
sss
sss
sss
sss
sss
Previous
Page 02/02
Next
Erase chapter from playlist?
ENTER
Erase
Cancel
ENTER
11 View Playlists
[RAM] [-RW‹VR›]
≥Follow steps 1 to 7 of “View Chapters”.
[8] Select “View Playlists” with [3, 4] and press
[ENTER].
You go back to Playlist View.
39
VQT0N92
Convenient functions
DVD
Using DISPLAY menus
∫ Common procedures
Preparation
DVD/VHS POWER
TV
POWER
≥Press [DVD].
VOLUME
CH
INPUT SELECT TV/VIDEO
[1] Press [DISPLAY].
OPERATION
SELECT
Disc
Play
Video
Audio
VHS
DVD
Î Digital 2/0ch
1
Soundtrack
DVD
TRACKING/V-LOCK
Off
Subtitle
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Stereo
Audio channel
VHS MENU
RETURN
Other
3, 4, 1
SUB MENU
Menu
Item
Setting
S
TIME SLIP
JET REW
[2] Select a menu with [3, 4] and press [1].
SCHEDULE
DISPLAY
STATUS
[3] Select an item with [3, 4] and press [1].
DISPLAY
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[4] Select a setting with [3, 4].
≥Different operations are required depending on settings. Follow
the on-screen instructions.
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
∫To exit the screen
Press [DISPLAY].
For your reference
≥The screens depend on the disc contents.
≥Depending on the condition of the unit (playing, stopped, etc.) and
the type of software you are playing, there are some items that you
cannot select or change.
1 Disc menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD]
[A] Sound track/Subtitle language
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
Disc
Play
Video
Audio
Other
Î Digital 2/0ch
Off
Stereo
1
Soundtrack
Subtitle
VIE:
Vietnamese
Audio channel
THA: Thai
¢:
Others
Soundtrack
[B] Audio attributes
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
The disc’s audio attributes appear.
LPCM/PPCM/Î Digital/DTS/MPEG: Signal type
k (kHz):
b (bit):
Sampling frequency
Number of bits
[DVD-A] [DVD-V]
ch (channel):
Number of channels
Select the audio and language. (See [B] Audio attributes)
Subtitle
For your reference
≥The display changes according to the disc content. You cannot
make a change when there is no recording.
≥Some discs allow changes to sound tracks, subtitles, and angles
only by using the disc’s setup menus (l 21).
[DVD-A] [DVD-V]
Turn the subtitle on/off and select the language (See [A] Sound
track/Subtitle language)
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›] (Only disc that contain subtitle
on/off information)
Turn the subtitle on/off.
≥Subtitle on/off information cannot be recorded using this unit.
≥If the subtitles overlap the closed captions recorded on discs,
turn the subtitles off.
Audio channel [RAM] [-RW‹VR›] [VCD]
l 23, Changing audio during play
Angle [DVD-A] [DVD-V]
Change the number to select an angle.
STILL-P (Still picture) [DVD-A]
Selects the play method for still pictures.
Page:
Select the still picture number and play.
≥RANDOM: Plays in random order.
≥Return:
Returns to the default still picture on the disc.
PBC (Playback control) [VCD] (l 64)
Indicates whether menu play (playback control) is on or off.
40
VQT0N92
Convenient functions
DVD
1 Play menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
[RAM] [-R] [-RW‹V›] [+R] [DVD-V] [-RW‹VR›]
Title,.Chapter,.Off
Disc
Off
Repeat Play
^------------------------J
Play
[VCD] [CD] (excluding MP3 discs)
Track,.All,.Off
Video
Audio
Other
^----------------J
[DVD-A] [CD] (MP3 discs only)
Track,.Group,.Off
^-----------------------J
Repeat play
This function works only when the elapsed play time is
displayed.
Select the item for repeat play. Depending on the disc, the items
that can be selected will differ.
While playing a playlist
[RAM]
Playlists,.Off
^-----------------J
1 Video menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD]
°Transfer (When “Progressive” is set to “On”)
Select the method of conversion for progressive output to suit
the type of material being played (l 64, Film and Video).
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2: Compatible with 30 frame-per-second film content in
addition to 24 frame-per-second film content.
Video: Select when the video content is distorted by using
Auto1 and Auto2.
Disc
Play
Video
Audio
Other
Normal
On
Picture
MPEG-DNR
Progressive
Line-in NR
On
Auto 1
Automatic
Transfer
Picture
nt
s
n
To select the picture mode during play
Normal: Default setting
e
i
n
tio
nc
Soft:
Fine:
Soft picture with fewer video artifacts
Details are sharper
nve
Line-in NR (Only when IN1, IN2 or TP is selected)
Reduces video tape noise during transfer (dub).
Depending on the software, jittering may occur.
Automatic:
Cinema: Mellows movies, enhances detail in dark scenes.
MPEG-DNR
Noise reduction only works on picture input from a
video tape.
Reduces noise and picture degradation.
On()Off
On:
Off:
Noise reduction works for any video input.
Noise reduction is off. Select when you want to record
input as is.
°Progressive (l 64)
Select “On” to enable progressive output.
≥Select “Off” if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be
displayed.
° Only when you have selected “480p” in “TV Type” (l 19).
On()Off
1 Audio menu
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›]
Note
Disc
Play
Video
Audio
Other
≥Turn V.S.S. off if it causes distortion.
≥V.S.S. does not work for SAP recordings.
Off
Off
V.S.S.
Dialog Enhancer
Dialog Enhancer
[RAM] [-RW‹V›] [+R] [DVD-V] [DVD-A] [-RW‹VR›]
(Dolby Digital, 3-channel or over only, including a center
channel)
V.S.S.
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›]
The volume of the center channel is raised to make dialog easier
(Only for Dolby Digital with 2.0 or more channels)
to hear.
Enjoy a surround-sound effect if you are using 2 front speakers
(L/R) only.
On()Off
Natural()Emphasis()Off
^------------------------------------------J
1 Other menu
Position
Disc
Play
Video
Audio
Other
To change the display position
1 (Standard) –5:
The higher the setting the lower the screen moves.
1
Position
41
VQT0N92
Convenient functions
DVD
Entering a password (Ratings)
DVD/VHS POWER
TV
POWER
You can limit play of DVDs unsuitable for some audiences (children,
for example). Play and changes to the settings are not possible
unless you enter a password.
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
Preparation
≥Press [DVD].
Numeric
buttons
When setting ratings
The password screen is shown when you select levels 0 to 7.
[1] Input a 4-digit password with the numeric buttons.
≥If you enter a wrong number, press [2] to erase it before you
press [ENTER].
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
SLOW/
SKIP/INDEX
REW SEARCH FF
≥Do not forget your password.
[2] Press [ENTER].
PLAY
[3] Press [ENTER].
The password is entered and the unit is locked.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
FUNCTIONS
RETURN
Now, when you insert a DVD-Video that exceeds the ratings limit you
set, a message appears on the TV.
Follow the on-screen instructions.
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
When changing ratings
S
The password screen is shown when you select “Ratings”. (l 43)
[1] Input a 4-digit password with the numeric buttons and press
[ENTER].
SCHEDULE
DISPLAY
STATUS
JET REW
Unlock Recorder: To unlock the unit and return the rating to 8
Change Password: To change your password
Changing the unit’s settings
Preparation
Change Level:
To change the rating level
≥Press [DVD].
Temporary Unlock: To temporarily unlock the unit (the unit locks
again if you switch it to standby or open the
disc tray)
∫ Common procedures
Use the following procedure to change the settings if necessary.
[2] Select a desired item with [3, 4] and press [ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
FUNCTIONS
[1] While stopped
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Press [FUNCTIONS].
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
FLEXIBLE RECORDING
[2] Select “Other
SETUP
SCHEDULE
VCR Plus+
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
Dubbing
ENTER
DUBBING
Other Functions
Return
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
(1)
(2)
(3)
SETUP
Off Timer
6 Hours
Remote Control Code
Clock Settings
Set Code 1
Channel
Setup
Quick Start
On
(1) Menus
(2) Items
(3) Options
Restore Default Settings
Disc
Video
Audio
Display
TV Screen
[4] Select a menu with [3, 4] and press [2, 1].
[5] Select an item to be changed with [3, 4] and
press [ENTER].
[6] Select an option with [3, 4] and press
[ENTER].
≥Some options require different operations. Follow the displayed
instructions.
∫To return to the previous screen
not activated until you press [ENTER].
∫To exit the screen
Press [RETURN] several times.
For your reference
≥The settings remain intact even if you switch the unit to standby.
42
VQT0N92
Convenient functions
DVD
∫Disc
Summary of settings
This description shows the initial settings for the unit. For
Settings for Playback
Press [ENTER] to show the following settings.
details on menu operation. (l 42)
≥Underlined items are the factory default settings.
Ratings (l 42)
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
[8 No Limit]: All DVD-Video can be played.
≥
≥
/
indicates settings effective for DVD only.
[1] to [7]:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
∫Channel
/
[0 Lock All]: Prohibits play of all DVD-Video.
Signal Source (RF IN) (l 17)
Select to suit the type of antenna you are using.
[Antenna] [CableTV]
Changing ratings (When level 0 to 7 is selected)
[Unlock Recorder] [Change Password]
[Change Level] [Temporary Unlock]
Set Channels Automatically (l 17)
Preset Channel Captions (l 18)
Manual Channel Captions (l 18)
VCR Plusi Ch. Setting (l 17)
Play DVD-Audio in Video Mode
Select “Video Mode (Video On)” to play DVD-Video content on
some DVD-Audio.
[Video Mode (Video On)] [Audio Mode (Video Off)]
Video Mode The setting returns to “Audio Mode (Video Off)”
(Video ON)
when you change the disc or turn the unit off.
∫Setup
/
Off Timer
Audio Language
[English] [French] [Spanish] [Original] [Other ¢¢¢¢]
Select how long the unit remains on when it is not being used.
Subtitle Language
[Automatic] [English] [French] [Spanish] [Other ¢¢¢¢]
Remote Control Code (l 19)
[Set Code 1] [Set Code 2] [Set Code 3]
Menu Language
[English] [French] [Spanish] [Other ¢¢¢¢]
nt
s
n
Clock Settings
Press [ENTER] to show the following settings.
e
i
n
tio
Choose the language for audio, subtitles and disc menus. [DVD-V]
≥If a language which is not recorded is selected, or if languages
are already fixed on the disc, the language set as the default on
the disc will be played instead.
nc
nve
Set Clock Automatically (l 46)
fu
Co
Set Clock Manually (l 46)
Adjust Time Zone (l 46)
Original
This corrects the time set in Auto Clock Setting.
The status is not displayed on the Set Up menu when the Auto
Clock Setting is not set.
The original language of each disc will be selected.
Other ¢¢¢¢
This is the language code setting.
Input a code number with the numeric buttons. (l 45,
“Language code list”)
[j1] [0] [i1]
Quick Start
Automatic
1 Sec. Quick Start for Recording on DVD-RAM°
° From the power off state, recording on DVD-RAM starts about 1
second after first pressing the [Í, DVD/VHS POWER] and then
sequentially pressing the [¥, REC] (Quick Start Mode).
If the language selected for “Audio Language” is not available,
subtitles of that language will automatically appear if available on
the disc.
Power consumption is also higher when the unit is turned off if this is
set to “On”.
[On] [Off]
Settings for Recording
Press [ENTER] to show the following settings.
Recording Time in EP Mode
Restore Default Settings
Select the maximum number of hours for recording in EP mode
(l 25, “Recording modes and approximate recording times”).
[EP-Extended Play (6H)] [EP-Extended Play (8H)]
This returns SETUP menus to default settings, except for the clock,
channel settings, ratings level, and on-screen language.
[Yes] [No]
EP-Extended You can record for 6 hours on an unused 4.7 GB
Play (6H)
EP-Extended You can record for 8 hours on an unused 4.7 GB
Play (8H) disc.
disc.
43
VQT0N92
Convenient functions
DVD
∫Audio
≥ Underlined items are the factory default settings.
Dynamic Range Compression
[DVD-V] (Dolby Digital only)
Change the dynamic range (l 64) for easier listening in low volume.
∫Video
Still Mode
Select the type of picture shown when you pause play.
(l 64, “Frame and field”)
[Automatic] [Field] [Frame]
[On] [Off]
Select MTS
Select whether to record the main or secondary audio type (SAP)
when recording or transferring (dubbing) to DVD-R, DVD-RW (DVD-
Video format) or +R. (You cannot select the audio type on the unit
when recording audio to DVD-R, DVD-RW (DVD-Video format) or
+R from an external device. Select it on the external device.)
[Main] [Secondary Audio Program (SAP)]
Field
Select if jittering occurs when “Automatic” is selected.
Frame
Select if you cannot see small text or fine patterns
clearly when “Automatic” is selected.
Black Level Control
Select “Normal”, “Lighter” or “Darker” to adjust the black level control
to the desired setting for picture enhancement.
Press [ENTER] to show the following settings.
Digital Audio Output
Change the settings when you have connected equipment through
the unit’s DIGITAL AUDIO OUT terminal (l 15).
Press [ENTER] to display the menu.
Input Level
Adjusts the black level of the input signal.
[Lighter] [Darker]
PCM Down Conversion
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz
or 88.2 kHz, or the disc has copy protection.
Output Level (Composite/SVideo)
Adjusts the black level of the output signal from the VIDEO OUT
and S-VIDEO OUT terminal.
[Lighter] [Darker]
[On] [Off]
Output Level (Component)
Adjusts the black level of the output signal from the COMPONENT
VIDEO OUT (Y/PB/PR) terminals.
[Lighter] [Normal] [Darker]
On
Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process
signals with sampling frequency of 96 kHz or
88.2 kHz.)
Off
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Choose whether to output by “Bitstream” which processes Dolby
Digital signals on other connected equipment or to convert the
signals to “PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having Dolby Digital logo.
PCM
When you have connected the unit to a piece of
equipment that doesn’t have Dolby Digital logo°.
DTS
Choose whether to output by “Bitstream” which processes DTS
signals on other connected equipment or to convert the signals to
“PCM (2ch)” on the unit before output.
[Bitstream] [PCM]
Bitstream When you have connected the unit to a piece of
equipment having DTS logo.
PCM
When you have connected the unit to a piece of
equipment that doesn’t have DTS logo°.
° Incorrect settings can cause noise to be output which can be
harmful to your ears and speakers, and audio will not be recorded
properly on media such as mini discs.
44
VQT0N92
Convenient functions
DVD
∫TV Screen
≥ Underlined items are the factory default settings.
TV Type (l 19)
∫Display
Status Messages
Choose whether to show status messages automatically or not.
Choose the setting to suit your TV and preference.
[Aspect 4:3 & 480i] [Aspect 4:3 & 480p]
[Aspect 16:9 & 480i] [Aspect 16:9 & 480p]
[Automatic] [Off]
4:3 TV Settings for DVD-Video
On-screen Language
Choose the language for these menus and the on-screen messages.
[English] [Español] [Français]
/
You can select how to display the image on the TV when you watch
16:9 images (DVD-Video) on a 4:3 standard aspect TV. (l 64)
[Pan and Scan (Stretch to fit)] [Letterbox (Shrink to fit)]
Pan and Scan
(Stretch to fit)
Video recorded for a widescreen is played with
the sides cut off if Pan & Scan was specified.
If 16:9 software prohibits Pan & Scan, the
image will appear in the letterbox style (with
black bands above and below the picture)
despite the setting here.
Blue Background
Select whether to show the blue background, normally shown when
TV reception is poor.
[On] [Off]
Front Display
/
Changes the brightness of the unit’s display.
[Bright] [Dim] [Automatic]
Letterbox
(Shrink to fit)
Video recorded for a widescreen is played in
the letterbox style.
Automatic The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit is
turned off, the unit’s display disappears. While using
this mode the standby power consumption can be
reduced.
4:3 TV Settings for DVD-RAM
You can select how to display the image on the TV when you watch
16:9 images (DVD-RAM) on a 4:3 standard aspect TV. (l 64)
[4:3] [Pan and Scan (Stretch to fit)] [Letterbox (Shrink to fit)]
4:3
Titles are played as recorded.
nt
s
n
e
i
Pan and Scan
(Stretch to fit)
Video recorded for a widescreen is played with
the sides cut off.
n
tio
nc
nve
fu
Letterbox
(Shrink to fit)
Video recorded for a widescreen is played in
the letterbox style.
Co
Language code list
Abkhazian:
Afar:
Afrikaans:
Albanian:
Ameharic:
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
6566 Chinese:
6565 Corsican:
6570 Croatian:
8381 Czech:
6577 Danish:
6582 Dutch:
7289 English:
6583 Esperanto:
6588 Estonian:
6590 Faroese:
6665 Fiji:
9072 Hausa:
6779 Hebrew:
7282 Hindi:
6783 Hungarian:
6865 Icelandic:
7876 Indonesian:
6978 Interlingua:
6979 Irish:
7265 Lithuanian:
7684 Romanian:
7775 Russian:
7771 Samoan:
7783 Sanskrit:
7776 Scots Gaelic:
7784 Serbian:
7773 Serbo-Croatian: 8372 Turkmen:
7782 Shona:
7779 Sindhi:
7778 Singhalese:
7865 Slovak:
7869 Slovenian:
7879 Somali:
7982 Spanish:
8279 Telugu:
8285 Thai:
8377 Tibetan:
8365 Tigrinya:
7168 Tonga:
8382 Turkish:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
7387 Macedonian:
7273 Malagasy:
7285 Malay:
7383 Malayalam:
7378 Maltese:
7365 Maori:
7165 Marathi:
7384 Moldavian:
7465 Mongolian:
7487 Nauru:
7578 Nepali:
7583 Norwegian:
7575 Oriya:
7589 Pashto, Pushto: 8083 Sundanese:
7579 Persian:
7585 Polish:
8378 Twi:
6984 Italian:
8368 Ukrainian:
8373 Urdu:
8375 Uzbek:
8376 Vietnamese:
8379 Volapük:
6983 Welsh:
8385 Wolof:
8387 Xhosa:
8386 Yiddish:
8476 Yoruba:
8471 Zulu:
8465
7079 Japanese:
7074 Javanese:
7073 Kannada:
7082 Kashmiri:
7089 Kazakh:
7176 Kirghiz:
7565 Korean:
6869 Kurdish:
6976 Laotian:
7576 Latin:
Basque:
6985 Finnish:
Bengali, Bangla: 6678 French:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian:
Cambodian:
Catalan:
6890 Frisian:
6672 Galician:
6682 Georgian:
6671 German:
7789 Greek:
6669 Greenlandic:
7577 Guarani:
6765 Gujarati:
7065 Swahili:
8076 Swedish:
8084 Tagalog:
8065 Tajik:
7679 Portuguese:
7665 Punjabi:
7178 Latvian, Lettish: 7686 Quechua:
7185 Lingala:
8185 Tamil:
7678 Rhaeto-Romance: 8277 Tatar:
8484
45
VQT0N92
Convenient functions
DVD
Clock Settings
“Clock settings” made here are applied to VHS as well.
DVD/VHS POWER
TV
Preparation
POWER
≥Press [DVD].
VOLUME
CH
INPUT SELECT TV/VIDEO
FUNCTIONS
[1] While stopped
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Press [FUNCTIONS].
[2] Select “Other
Playback
Schedule
DIRECT NAVIGATOR
PLAYLISTS
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
FLEXIBLE RECORDING
SETUP
SCHEDULE
VCR Plus+
2
1
3
DISC MANAGEMENT
Functions” with [3, 4]
and press [ENTER].
[3] Select “SETUP” with
[3, 4] and press
[ENTER].
[4] Select “Setup” with [3,
4] and press [2, 1].
[5] Select “Clock Settings”
with [3, 4] and press
[ENTER].
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
Dubbing
ENTER
DUBBING
FUNCTIONS
VHS MENU
Other Functions
Return
3, 4, 2, 1
ENTER
RETURN
SUB MENU
S
RETURN
STATUS
SETUP
Off Timer
6 Hours
TIME SLIP
JET REW
SCHEDULE
DISPLAY
STATUS
Clock Settings
Channel
Setup
Quick Start
On
REC
REC MODE DVD ERASE ADD/DLT
Restore Default Settings
Disc
Video
Audio
Display
TV Screen
1 Set Clock Automatically
1 Adjust Time Zone
≥Follow steps 1 to 5 of “Clock Settings”.
≥Follow steps 1 to 5 of “Clock Settings”.
Adjust the time zone (j1 or i1) if it was not set correctly with auto
clock setting.
You cannot change this setting if you set the clock manually.
[6] Select “Set Clock Automatically” with [3, 4]
and press [ENTER].
[7] Press [ENTER].
[6] Select “Adjust Time
Adjust Time Zone
≥Auto setting starts. This can take some time, up to a few hours
Zone” with [3, 4] and
press [ENTER].
j1
in some cases. The following screen appears when setting is
complete.
0
i1
Set Clock Automatically
[7] Select “j1” or “i1”
Auto Clock Setting is complete.
with [3, 4] and press [ENTER].
7/15/2005
DST...................
Time Zone.......
11:15 AM
On
CST
∫To return to the previous screen
Press [RETURN].
≥If the time was not set correctly, use manual clock setting or
time zone adjust.
1 Set Clock Manually
≥DST, (Daylight Saving Time) shows the summertime setting.
≥Time Zone shows the time difference from Greenwich Mean
Time (GMT).
≥Follow steps 1 to 5 of “Clock Settings”.
[6] Select “Set Clock Manually” with [3, 4] and
press [ENTER].
EST (Eastern Standard Time) l GMT j5
CST (Central Standard Time) l GMT j6
MST (Mountain Standard Time) l GMT j7
Set Clock Manually
Month
1
Day
1
Year
Hour
12
Minute
/
2000
:
/
SAT
00 PM
PST (Pacific Standard Time)
l GMT j8
DST
Time Zone
EST
AST (Alaska Standard Time) l GMT j9
HST (Hawaii Standard Time) l GMT j10
For other areas: xx hr
OFF
ENTER
[8] Press [ENTER].
[7] Use [2, 1] to select the item you want to
change, and press [3, 4] to change the setting.
∫To cancel in the middle
Press [RETURN].
≥DST (Daylight Saving Time): On or Off
If you select “ON”, the clock is advanced one hour starting at
2 a.m. on the first Sunday in April and ending at 2 a.m. on the
last Sunday in October.
≥Time Zone (labove)
[8] Press [ENTER].
≥The clock starts.
≥When you change the time zone, the recording times for titles
recorded before the time zone adjustment also change to
correspond to the new time zone.
∫To return to the previous screen
Press [RETURN].
46
VQT0N92
Convenient functions
DVD
∫ Display examples
(1) Current medium
FUNCTIONS window
By using the FUNCTIONS window you can access the main
(1)
(2)
(3)
DVD-RAM
Rec.
Play
(2) Current recording or play status, input
channel
functions quickly and easily.
Preparation
≥Press [DVD].
≥Shows the current state of the unit and
the input channel.
Stereo
[1] While stopped
Rec.:
Pause:
Play:
Play t1.3:
;:
Recording
Recording paused
Playing
Press [FUNCTIONS].
FUNCT
IONS
DVD
DVD-RAM
Cartridge Protection Off
Disc Protection Off
Quick Viewing (Play k1.3)
Playing paused
Fast forwarding (5 speeds)
Rewinding (5 speeds)
Slow-motion (5 speeds)
Reverse slow-motion (5 speeds)
Playback
Schedule
DIRECT NAVIGATOR
SCHEDULE
VCR Plus+
5:
6:
F:
G:
2
1
3
Dubbing
DUBBING
ENTER
Other Functions
Tray Open/Tray Close:
Indicates the status of the disc tray
≥Functions displayed depend on the type of disc.
[2] Select an item with [3, 4] and press [ENTER].
≥If you select “Other Functions”, press [3, 4] to select an item
and press [ENTER].
(3) Audio type (l 23, 25)
(4)
π
Remain
6/8 10:15 PM
T1 0:05.14 XP
2:34 XP
(5)
(6)
π
π
T2 0:00.10 SP
∫To exit the FUNCTIONS window
Press [FUNCTIONS].
(7)
(4) Available recording time and recording mode
(e.g.: “2:34 XP” indicates 2 hours and 34 minutes in XP mode)
(5) The current date and time
Status displays
Preparation
nt
s
n
(6) Elapsed play time
e
i
n
≥Press [DVD].
(7) Recording time
tio
nc
≥Shows recording time, recording mode and a rough guide to
how much space has been used for recording on the disc.
nve
fu
∫ Changing the information displayed
Co
Status messages appear on the TV when operating the unit, to show
you what operation was performed and what condition the unit is in.
Press [STATUS] to change the information
displayed.
The display changes each time you press the button.
For example, DVD-RAM
DVD-RAM
Rec.
Play
Stereo
π
Remain
6/8 10:15 PM
T1 0:05.14 XP
2:34 XP
DVD-RAM
Rec.
π
π
T2 0:00.10 SP
Play
Stereo
No display
47
VQT0N92
VHS
Playback
VHS
Inserting a video cassette
The surface on which you can see a roll of tape should face up,
Insert a video cassette.
≥The unit is automatically turned on.
∫To eject a video cassette
≥You can eject a video cassette even when the unit is in standby mode. It switches back to
standby once it ejects the video cassette.
For main unit
≥Press [<, EJECT] on the main unit.
For remote control
≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.
Video cassette information
∫ Video cassettes
≥Break off the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of
adhesive tape when you want to use the video cassette for recording again.
≥You can use video cassettes with the VHS and S-VHS marks, but the unit is unable to make full use of
the characteristics of S-VHS video cassettes.
Tab
∫ Video cassette care
≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and
discard them when they become dirty or damaged.
≥Never use video cassettes on which juice has been spilled or those that are extremely damaged since this will not only cause the heads to
become dirty, but will also make the unit malfunction.
∫ Maintenance
Cleaning the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from
a qualified service person.
48
VQT0N92
Playback
VHS
Playing a video cassette
∫To pause play
Press [;, PAUSE]. (Press again to restart play.)
DVD/VHS POWER
TV
POWER
Í
∫To stop play
Press [∫, STOP].
VOLUME
CH
INPUT SELECT TV/VIDEO
Note
OPERATION
SELECT
VHS
DVD
VHS
≥When the unit is standby, an inserted video cassette can be played
back by pressing [1, PLAY].
TRACKING/V-LOCK
CANCEL/RESET
V
SLOW/
≥When the tape reaches its end, the unit automatically rewinds it to
the beginning. This function does not work during scheduled
recording, fast-forwarding and specified stop recording.
≥Jet Search, cue, review or slow playback will be automatically
canceled after 10 minutes, and pause after 5 minutes.
≥When viewing a still picture or during slow playback, the picture
that appears in VP mode may be distorted.
≥When playing back a tape which was recorded on another VCR, it
may be necessary to adjust the tracking (l 50). In some cases the
picture quality may still be inferior. This is due to format constraints.
SKIP/INDEX
REW SEARCH FF
6, 5
PLAY
1
;
∫
NU
DIRECT NAVIGATOR
FUNCTIONS
S
TIME SLIP
VHS MENU
SCHEDULE
JET REW
DISPLAY
STATUS
TOP MENU
6 JET REW
Preparation
≥Select the unit viewing channel (e.g. the AV input) on the TV.
≥Press [VHS].
[1] Press [Í, DVD/VHS POWER] to turn the unit on.
[2] Insert a recorded video cassette. (l 48)
[3] Press [1, PLAY].
≥Play starts automatically if you insert a video cassette with the
tab removed.
Fast-forward/Rewind
Slow
While stopped
During play
k
c
Press [6] (backward)/[5] (forward).
Press and hold [;, PAUSE] for about 2 seconds or
more.
ba
y
a
Cue/Review
≥Press [1, PLAY] to restart normal playback.
Pl
During play
Jet Rewind
To perform a Higher Speed Rewind
The “J. REW” indication appears on the TV screen (except when the
remaining tape time indication appears).
Tap or keep pressing [6] (backward)/[5]
(forward).
≥If you keep pressing these buttons, normal playback restarts by
releasing them.
≥Tap [1, PLAY] to restart normal playback.
≥Depending on the tape or an operating condition, the rewind speed
may change somewhat.
≥The tape counter is reset to “0:00.00” when the tape is rewound to
the beginning.
Jet Search
During play
Tap [6] (backward)/[5] (forward) twice. You
≥Depending on the tape, this function may not work.
can increase Cue/Review search speed.
≥Press [1, PLAY] to restart normal playback.
≥You can select search speed to view the recorded picture. (l 54)
≥The picture recorded in EP or VP mode may be distorted if it is
played at approx. 35 times speed. A vertical scroll may occur. It is
not a malfunction but if it happens, change to approx. 27 times
speed.
≥The picture may not be in color or may be distorted depending on
the TV.
49
VQT0N92
Playback
VHS
Playing a tape with high image quality
DVD/VHS POWER
TV
CH, W, X
POWER
VOLUME
CH
INPUT SELECT TV/VIDEO
a TV compatible with progressive output.
INPUT SELECT
TV/VIDEO
VHS
Preparation
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
≥Connect to the COMPONENT VIDEO IN terminals (l 15)
≥Select the TV type (l 19, 45)
TRACKING/
V-LOCK, r, s
CH, W, X
Numeric
buttons
[1] Press [DVD].
AUDIO
[2] Press [INPUT SELECT] or [CH, W, X] to select
the “TP” channel.
CANCEL/RESET
VCR Plus+
CM SKIP
≥About “TP” channel (l 58)
SLOW/
SKIP/INDEX
REW SEARCH FF
[3] Press [VHS] and press [1, PLAY].
PLAY
≥Playing the tape with high image quality is initiated.
1
;
∫
Note
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
≥Set the TV’s aspect ratio according to the TV size.
≥The TV must be compatible with progressive output.
Adjusting the playback picture
SUB MENU
RETURN
TIME SLIP
S
∫ Manual tracking
SCHEDULE
STATUS
DISPLAY
JET REW
The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
STATUS
VCR/TV
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
DUBBING
VHS DVD
VCR/TV
CHAPTER
During play
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the noise disappears.
Preparation
≥Press [VHS].
∫ Vertical locking adjustment
Adjust the vertical synchronization to stop the picture from jiggling
while paused.
S-VHS Quasi Playback (SQPB)
It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
While paused
Press [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s].
Repeat until the jiggling stops.
≥It is not possible to record in the S-VHS system with the unit.
Repeat Playback
During play or while stopped
Keep pressing [1, PLAY] for about 5 or
more seconds.
≥The “RP” indication appears on the unit’s display.
≥At the end of the program, the tape rewinds to the
beginning of the program and plays it again (it only
works if there is at least 5 seconds blank space at the end of the
program). This repeats until you cancel it.
∫To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
∫To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH, W, X] on the VHS side of the main unit.
∫ To restart normal playback
Press [1, PLAY].
∫To stop play
Press [∫, STOP].
50
VQT0N92
Recording
VHS
Recording TV programs
≥The remaining tape time may not be displayed correctly depending
on the tape used.
∫ Recording procedures
Preparation
∫ Specifying the time when recording will
≥Select the unit viewing channel (e.g. AV input) on the TV.
stop
Preparation
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
≥Press [VHS].
≥Press [VHS].
[1] Insert a video cassette with an intact accidental
While recording
Press [¥, REC] to select recording time.
≥On the main unit, press [¥, REC] on the VHS side.
erasure prevention tab. (l 48)
[2] Press [CH, W, X] to select a TV channel.
≥If you keep pressing these buttons, the channels change
quickly.
The unit’s display
Each time you press the button:
Counter (Cancel) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------ OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
To select channels with the numeric buttons:
Antenna Mode (Airwaves)
e.g.,
“5”:
“15”:
[0] )[5]
[1] )[5]
For your reference
≥This does not work during scheduled recording.
≥Recording stops and the set time is cleared if you press [∫, STOP].
CableTV Mode (Cable)
e.g.,
“5”:
“15”:
“115”:
[0] )[0] )[5]
[0] )[1] )[5]
[1] )[1] )[5]
∫ Watching the TV while recording
Preparation
≥Connection (without Audio/Video cable)
- Make sure that the TV indicator is lit on the unit’s display. If it is
not lit, press [VCR/TV] to light it.
[3] Press [REC MODE] to select a recording mode.
Each time you press the button:
SP>EP>VP
^-----------------}
≥Connection (with Audio/Video cable)
- Press [TV/VIDEO] to change the input mode to “TV”.
[4] Press [¥, REC] to start recording.
∫To pause recording
Press [;, PAUSE]. (Press again to restart recording.)
Press TV’s [CH, W, X] to select a desired TV
channel.
∫To stop recording
Press [∫, STOP].
For your reference
≥You can also do this if the unit is making a scheduled recording.
≥The recording is not affected.
k
c
ba
y
a
Recording mode
Pl
SP: You can record the length shown on the tape.
EP: 3 times the length of SP mode.
VP: 5 times the length of SP mode.
∫ Playing/Recording DVD while VHS
recording
≥To have a longer recording capacity, select “EP” or “VP”.
≥If the image quality is important to you or if you wish to store the
tape for a long period, select “SP”.
g
You can play or record discs while recording. The recording will not
be affected.
≥DVD playback (l 21)
n
i
rd
o
c
≥The unit can play tapes recorded in LP mode on other equipment
(“LP” lights on the unit’s display).
≥DVD recording (l 25)
Re
record the same channel on DVD.
VP mode:
≥“VP” flashes on the unit’s display for 8 seconds after recording
has started.
≥A tape recorded in VP mode by the unit cannot be played
back by other VCRs. It is recommended to distinguish it from
other tapes by writing “VP” on the tape label, etc.
≥It takes more time for automatic tracking to work when playing
tapes recorded with VP mode, and it may not work at all with
some tapes. Do tracking manually if this is the case (l 50).
Note
≥Even if the video cassette you use is labeled “S-VHS”, it is not
possible to record in the S-VHS system with the unit. It
records in the normal VHS system.
≥You cannot play VP recording on other equipment.
≥You cannot change channels while recording. You can change
channels while in pause mode.
≥When recording is paused for 5 or more minutes, the unit returns
to stop mode.
∫To display the approximate remaining tape time
[1] Select “TAPE SELECT” from the VHS MENU and select the
corresponding tape length. (l 54)
[2] Press [STATUS] several times.
The display changes as follows each time [STATUS] is pressed.
Clock ) Counter ) Remaining tape time
^--------------------------------------------------------}
51
VQT0N92
Recording
VHS
Scheduled Recording
DVD/VHS POWER
TV
POWER
You can enter up to 16 programs a month in advance.
VOLUME
CH
INPUT SELECT TV/VIDEO
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 48)
≥Press [VHS].
Numeric
buttons
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
VCR Plusi
∫ Using VCR Plus_ system
SLOW/
SKIP/INDEX
REW SEARCH FF
®
Entering the PlusCode numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
≥When connecting a cable TV box or satellite receiver, the VCR
Plusi system does not work. Program the scheduled recording
manually (l 53).
PLAY
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
3, 4, 2, 1
[1] Press [VCR Plus_].
ENTER
SUB MENU
RETURN
TIME SLIP
VCR Plus+
R 2 : 00
10/13 WE
SP
10:12 AM
S
RETURN
SCHEDULE
s
s
s
s
s
s
s
s
DISPLAY
STATUS
JET REW
SCHEDULE
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
[2] Press the numeric buttons to enter the
PlusCode number.
COPYING
VHS
VCR/TV
CHAPTER
DVD
≥Press [2] to move back to correct a digit.
[3] Press [ENTER].
Cautions for using scheduled recording
on DVD and VHS
time.
SCHEDULED
RECORDING
R 2 : 00
10/13 WE
ON
13WE 10:12 AM 10:30 AM S P
SP
10:12 AM
CH
25
DATE
OFF
≥Scheduled recording can be started whether the unit is turned on or
off. When the unit is turned off, the sound and the video cannot be
outputted to the TV.
≥ Confirm the program and correct it if necessary using [3, 4,
2, 1]. (“Manual programming” l 53, step 2)
≥“INVALID ENTRY” is displayed when you enter the wrong
PlusCode number. Reenter the PlusCode number.
∫Scheduled recording for TV programs cannot be
executed on both DVD and VHS at the same time.
Make sure the scheduled recording start times do not overlap on
both DVD (l 29) and VHS (l 53) Scheduled Recording screens.
[4] If the program is correct
Press [ENTER].
≥“ ” lights on the unit’s display.
≥Repeat steps 1–4 to program other recordings.
When the scheduled recording settings overlap:
≥When the start time of both scheduled recordings is the same, the
scheduled recording of DVD has priority.
[5] Press [RETURN].
≥When the same tuner channels are specified in scheduled
recordings on both VHS and DVD, only one scheduled recording
can be started.
≥When the interval between the first scheduled recording and the
second scheduled recording on DVD is 1 minute or less as shown
below, the second scheduled recording on DVD has priority over
the scheduled recording on VHS even if its start time is later than
the scheduled recording on VHS.
1 minute
DVD
2 CH
VHS
4 CH
10 CH
When the scheduled recording settings of DVD and VHS are
overlapped, the setting of DVD takes priority.
≥“ ” lights on the unit’s display of both sides in the standby mode.
When the recording starts, “ ” on the recording side (DVD side)
remains lit and the “ ” on the other side (VHS side) starts flashing.
52
VQT0N92
Recording
VHS
∫ Manual programming
Auto SP/EP mode
≥When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before scheduled
recording starts.
If, at the beginning of a scheduled recording, there is not enough
tape remaining to complete the recording, the SP/EP function will
automatically run the tape at EP speed for recording. This ensures
that the entire program will be recorded. If EP mode is not enough to
stretch the remaining tape to fit the whole program you will not be
able to record the whole TV program.
[1] Press [SCHEDULE].
≥Make sure “NEW SCHEDULED RECORDING” is selected.
CH
25
DATE
ON
OFF
NEW SCHEDULED
RECORDING is
selected.
13WE 10:12 AM 10:30 AM
NEW SCHEDULED RECORDING
S P
Scheduled recording
1st program
2nd program (60 min.)
(30 min.)
[2] Press [ENTER] to move and change the items
using [3, 4, 2, 1].
SCHEDULED
RECORDING
R 2 : 00
10/13 WE
ON OFF
s : ss s : ss
SP
10:12 AM
15 min.
at SP
45 min.
at EP
CH
DATE
ssss
30 min. at SP
ss
s s
Video tape (e.g.: 60-minute cassette)
≥You may also use the numeric buttons to enter “CH”.
≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (l 54)
≥Some tapes may not work correctly.
≥If the recording mode changes from SP to EP during a scheduled
recording, some picture distortion occurs at that point.
≥CH (Program Position/TV Station Name)
≥DATE
You can also make a daily or weekly program.
≥ON (start time)/OFF (finish time)
The time increases or decreases in 30-minute increments if
you hold down the button.
≥Recording mode
Check, change or delete programs
≥Even when the unit is turned off, you can display the scheduled
recording list by pressing [SCHEDULE].
You can also press [REC MODE] to change the recording
mode.
SP,.EP,.VP,.A°,.SP... (l 51)
° Auto SP/EP mode (l right)
Preparation
≥Press [VHS].
[3] Press [ENTER] when you have finished making
[1] Press [SCHEDULE].
changes.
CH
DATE
ON
OFF
6
25
SA
13WE
11:00 PM 12:00 PM S P
10:12 AM 10:30 AM S P
≥“ ” lights on the unit’s display.
≥“INVALID ENTRY” is displayed when you enter the wrong item.
Reenter the item.
NEW SCHEDULED RECORDING
≥To continue programming:
Select “NEW SCHEDULED RECORDING” and repeat steps
2–3.
[2] Press [3, 4] to select a program.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
[4] Press [RETURN].
g
n
i
The scheduled recording setting screen appears.
Note
rd
o
c
[4] If you press [ENTER] in step 3
Use [3, 4, 2, 1] to change and press [ENTER].
[5] Press [RETURN].
≥“ ” and “1” flashes when the unit cannot perform scheduled
recording (e.g., video cassette with no accidental erasure
prevention tab or no video cassette in the cassette compartment).
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥If you set (l 46) “DST” (Daylight Saving Time) to “ON” when
manually setting the clock, scheduled recording may not work
when summer switches to winter and vice versa.
Re
For your reference
≥Programs that failed to record are not deleted from the list
immediately, but are deleted from the list automatically at 4 a.m.
2 days later.
∫To stop recording while a program is working
Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the VHS of the main unit for 3
or more seconds to stop recording.
53
VQT0N92
Convenient functions
VHS
Changing the unit’s settings
DVD/VHS POWER
TV
POWER
Preparation
VOLUME
CH
INPUT SELECT TV/VIDEO
≥Select the unit viewing channel on the TV.
≥Press [VHS].
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
VHS
∫ Common procedures
[1] While stopped
AUDIO
Press [VHS MENU].
AUDIO
CANCEL/RESET
VCR Plus+
CM SKIP
VHS MENU
¥ ON
SLOW/
SKIP/INDEX
REW SEARCH FF
OSD
TAPE SELECT
OFF
:, 9
PLAY
¥ T120
T160
¥ ON
T180
OFF
∫
BLUE BACK
JET SEARCH
t 27 ¥ t 35
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
VHS MENU
STATUS
:
j/i:
SELECT
END
3, 4, 2, 1
:VHS MENU
SUB MENU
RETURN
TIME SLIP
[3] Use [2, 1] to change the setting.
S
SCHEDULE
STATUS
DISPLAY
JET REW
REC
REC MODE DVD ERASE ADD/DLT
CREATE
µ
Press [VHS MENU].
COPYING
VCR/TV
CHAPTER
VHS
DVD
1 Summary of settings
VHS Index Search System (VISS)
This description shows the initial settings for the unit. For
details on menu operation (l above).
≥ Underlined items are the factory default settings.
The unit automatically records special index signals on the tape
every time a recording is started. The index search function makes
use of these index signals to let you find the beginning of a desired
program quickly and easily.
∫VHS MENU
OSD (l 55)
[ON] [OFF]
∫Index signals are recorded in the following cases.
≥When a recording is started by pressing [¥, REC].
≥When scheduled recording is started.
ON
Messages appear on the TV screen for about
5 seconds after you perform operations.
≥The on-screen display will always appear on the TV
screen during rewind, Jet Rewind and fast forward.
Preparation
≥Select the unit viewing channel on the TV.
≥Press [VHS].
OFF
Messages do not appear.
≥Insert a recorded video cassette.
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time.
While stopped or during normal play
Press [: ] or [ 9].
≥Each press increases the number of skips.
[T120] [T160] [T180]
[T120]:
[T160]:
[T180]:
T30, T60, T90 and T120 tapes
T140 and T160 tapes
T180 tapes
∫To cancel the index search
Press [∫, STOP].
BLUE BACK
Note
[ON] [OFF]
≥You can search up to 20 index signals can be searched for in both
directions.
ON
The screen shows a blue background when you play
unrecorded portions.
≥When you press either one of the buttons too much, you can
control the number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the index signals are too
close together. Make recordings of at least 5 minutes.
OFF
The blue background function does not work.
JET SEARCH (l 49)
Set the speed for JET SEARCH when playing EP and VP tapes.
≥It is possible to view the picture recorded in EP or VP mode at
approx. 27 or 35 times speed.
[k27] [k35]
≥Select [k27] if the picture is poor at [k35].
54
VQT0N92
Convenient functions
VHS
Various on-screen display indications
Changing audio
To see these displays, set the “OSD” item in the “VHS MENU” to
When a stereo and/or SAP broadcast is received, “STEREO” or
“ON”. (l 54)
“SAP” lights to show the type of broadcast.
Press [STATUS].
While playing tapes
Press [AUDIO].
≥The audio changes as follows:
Stereo > Mono L > Mono R > No display (Normal audio track)
^------------------------------------------------------------}
The time and operation details appear on the screen for about
5 seconds.
1
2 3
4
5
CH 1
STEREO
Mono L
0:00.22
;¥ SP 1
6
7
∫While watching TV:
You cannot change audio.
Auto Bilingual Choice Function
When a stereo broadcast or SAP broadcast is recorded and played
back on the unit, stereo sound will be automatically selected in the
case of a stereo broadcast and SAP sound will be automatically
selected in the case of a dual-sound broadcast (Mono and SAP or
Stereo and SAP).
1
2
Channel display
Stereo/Mono/SAP indication
Indicates whether a program is broadcast in stereo, mono
or SAP.
≥This function may not work properly if the program is played back
from a mid point. In a case like this, press [AUDIO] and select the
right sound.
≥The function will not work with a cassette which has been recorded
using external equipment.
3
Audio indicators (appear only in playback)
The Left (Mono L) and Right (Mono R) indicators show
which sound mode is selected as follows:
Stereo:
Mono L:
Mono R:
Normal:
Stereo indicators appear.
The Mono L indicator appears.
The Mono R indicator appears.
Neither the L nor R indicator appears.
4
5
Operation status display
Shows the time and tape counter
Pressing [STATUS] once makes the on-screen display
appear. After that, press the button repeatedly to change
the display as follows:
Present time > Tape counter > Remaining tape time
^-----------------------------------------------------------------}
During Index search: “S 01” to “S 20” is displayed.
During Jet Rewind:
“J. REW” is displayed.
≥Press [CANCEL/RESET, ¢] to reset the tape counter
(elapsed time) to “0:00.00”. The tape counter is
automatically reset to “0:00.00” when inserting a video
cassette.
≥The remaining time is approximate. It will be incorrect if
you set the wrong tape time in “TAPE SELECT” in the
“VHS MENU” and if the tape is of poor quality.
nt
s
n
e
i
6
7
Cassette-in indicator
Shows whether you have inserted a video cassette.
n
tio
nc
nve
fu
Co
Recording mode indicator (l 51)
Note
≥These displays do not appear when paused or during slow play.
≥The on-screen display may be distorted depending on the playback
tape or the input signal.
55
VQT0N92
DVD/VHS
Transferring (Dubbing)
DVD VHS
Before transferring (dubbing)
You can select from a variety of methods to transfer (dub) on the unit.
You cannot transfer (dub) titles which have been treated to prevent copying.
Direction
Type of transfer (dubbing) you want
Suitable methods
From
To
Easy transferring (dubbing) with one button
≥When you want to transfer (dub) from the selected start
point to the end of the tape
One Touch Transfer
(l 57)
Transferring (dubbing) with detailed settings
≥When you want to transfer (dub) from the selected start
point to the end of the tape
DVD-RAM, DVD-R,
DVD-RW, or +R
VHS
≥When you want to transfer (dub) to fit in the remaining
capacity of the disc
Manual Transfer (l 58)
≥When you want to transfer (dub) while checking the video
and the audio to select the desired part
Easy transferring (dubbing) with one button
≥When you want to transfer (dub) a whole disc
≥When you want to transfer (dub) from the beginning of the
selected title to the end of the disc
One Touch Transfer
(l 59)
DVD-RAM or DVD-RW
(DVD Video Recording
format)
VHS
GUI Transfer (l 60)
Transferring (dubbing) with detailed settings
≥When you want to transfer (dub) multiple titles or playlists
in combination
≥When you want to transfer (dub) while checking the video
and the audio to select the desired part
Manual Transfer (l 62)
Easy transferring (dubbing) with one button
≥When you want to transfer (dub) a whole disc
≥When you want to transfer (dub) from the beginning of the
selected title to the end of the disc
One Touch Transfer
(l 59)
DVD-R, DVD-RW (DVD-
Video format) or +R
VHS
VHS
Transferring (dubbing) with detailed settings
≥When you want to transfer (dub) while checking the video
and the audio to select the desired part
Manual Transfer (l 62)
Cannot transfer
Easy transferring (dubbing) with one button
Finalized DVD-R, DVD-
RW (DVD-Video format),
+R, +RW or DVD-Video
on sale that are not copy-
protected, etc.
DVD-Video Transfer
Transferring (dubbing) with detailed settings
≥When you want to transfer (dub) whole of a disc
≥When you want to transfer only for the specified time
≥When you want to transfer (dub) while checking the video
and the audio to select the desired part
(l 61)
Manual Transfer (l 62)
∫Caution for transfer (dubbing) from VHS to DVD
≥Copy-protected video tapes cannot be dubbed. Most video tapes
are copy-protected to prevent illegal reproduction and they
cannot be recorded.
∫Caution for transfer (dubbing) from DVD to VHS
≥Copy-protected discs cannot be dubbed. Most discs are copy-
protected to prevent illegal reproduction and they cannot be
recorded.
≥When a copy-protected tape is inserted, a message appears on
the display and the recording stops on the spot.
≥If a part of a tape recorded in VP mode is dubbed to disc, noise
may appear at the beginning of the dubbed part.
Only the following operations are allowed while transferring
(dubbing):
≥Stopping transfer (One Touch or GUI Transfer) by pressing and
holding [RETURN] for about 3 seconds or more.
≥Stopping transfer (One Touch or Manual Transfer) by pressing
[∫, STOP].
(dubbing):
≥Stopping transfer (One Touch or GUI Transfer) by pressing and
holding [RETURN] for about 3 seconds or more.
≥Stopping transfer (One Touch or Manual Transfer) by pressing
[∫, STOP].
≥Turning the unit on/off (One Touch Transfer)
When transfer (dubbing) is started, the following operations
also start automatically
≥“Status Messages” on Display ) “Off” (l 45) (One Touch, GUI
or Manual Transfer)
≥Turning the unit on/off (One Touch Transfer)
When transfer (dubbing) is started, the following operations
also start automatically
≥Recording channel indicator on VHS ) “DC” (One Touch or GUI
Transfer)
≥“OSD” on VHS MENU ) “OFF” (l 54) (One Touch, GUI or
Manual Transfer)
≥Audio output when playing back DVD ) Stereo (L R) [RAM]
(One Touch, GUI or Manual Transfer)
≥Recording channel indicator on DVD ) “TP” (One Touch or GUI
Transfer)
When the “PB” indication flashes on the DVD side of the unit's
display, the playback location of the disc is recorded by the
Resume Function (l 21). If you start transferring (dubbing) at this
time, the transfer (dubbing) is executed from the top of the title
which contains the starting position of playback to the end of the
disc.
56
VQT0N92
Transferring (Dubbing)
DVD VHS
Transfer (Dubbing) from VHS
Note
≥While One Touch Transfer (Dubbing) is activated, a scheduled
recording cannot be started.
DVD/VHS POWER
TV
POWER
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
VOLUME
CH
INPUT SELECT TV/VIDEO
OPERATION
SELECT
VHS
DVD
PLAY
TRACKING/V-LOCK
DVD
∫Dividing a title to be dubbed
∫
In One Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
transfer (dub) to DVD.
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
FUNCTIONS
3, 4, 2, 1
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
ENTER
RETURN
SUB MENU
≥The recording time may become longer than the original title
depending on the number of index signals.
RETURN
S
TIME SLIP
CREATE
SCHEDULE
DISPLAY
STATUS
JET REW
F.REC
DUBBING
CHAPTER
If you want to transfer (dub) without dividing the contents into
titles, follow the methods below.
VHS
DVD
“ DVD
≥Set “Time Limit” to “On” on the GUI transfer (l below).
≥Manual transfer (l 58).
∫ GUI (Graphical User Interface) Transfer
VHS
CH
DVD
REC
(Dubbing)
DUBBING
VHS
DVD
/k1.3
[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) programs recorded on a tape onto a disc°° from
°
DUBBING indicator
° When you set the recording mode to “FR” and “Time Limit” to “Off”,
end. (l 58)
°° Available discs for transfer (dubbing) from tape are DVD-RAM,
∫
One Touch Transfer (Dubbing) (VHS
l
DVD)
[RAM] [-R] [-RW‹V›] [+R]
You can transfer (dub) programs recorded on a tape onto a disc° with
one stroke of the button.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
In One Touch Transfer (Dubbing), programs are automatically
the time when the transfer (dubbing) of the tape starts.
° Available discs for transfer (dubbing) from tape are DVD-RAM,
non-finalized DVD-R, DVD-RW (DVD-Video format) and +R.
DVD
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on discs in “Select MTS” in the “SETUP”
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
VHS
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
≥
Insert the video cassette containing the program to be copied (l 48).
[1] Press [DVD].
[2] While both DVD and VHS are stopped
≥Select the recording mode. (l 25)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on disc in “Select MTS” in the “SETUP” menu.
(l 44) [-R] [-RW‹V›] [+R]
Press [FUNCTIONS].
[3] Select “DUBBING” with [
3,
4] and press [ENTER].
[4] Set the transfer
DUBBING
VHS
Cancel All
Dubbing Direction
(dubbing) direction.
≥“Set “Source” to “VHS”.
≥If you are not going to change
the dub direction, press [4],
then skip to step 5.
Source
≥
Insert the video cassette containing the program to be copied (l 48).
g
)
DVD
VHS
n
i
Destination
r
Mode
ng
[1] While both DVD and VHS are stopped
VHS-Video
SP
er
bi
sf
Press and hold [“ DVD, DUBBING] for about 3
seconds or more (until “START” on the unit’s
display terminates flashing).
On the main unit, press [“ DVD].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit
lights.
ub
n
D
(
∫To change the setting
(1)Make sure “Dubbing Direction” is selected and press [1].
(2)Make sure “Source” is selected and press [ENTER].
(3)Press [3, 4] to select “VHS” and press [ENTER].
≥When you set “Source” to “VHS”, “DVD” is automatically
selected on “Destination”.
≥
Dub is automatically completed when the tape
reaches its end or the disc becomes full.
(4)Press [2].
(5)Press [4].
[5] Set the recording mode.
DUBBING
≥If you are not going to change
the recording mode, press [4],
then skip to step 6.
Cancel All
VHS-Video
SP
Format
Dubbing Direction
VHS
DVD
Recording Mode
Mode
VHS-Video
SP
Off
Time Limit
∫To change the setting
∫To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
(1)Make sure “Mode” is selected and press [1].
(2)Make sure “Recording Mode” is selected and press [ENTER].
57
VQT0N92
Transferring (Dubbing)
DVD VHS
(3)Select recording mode (XP, SP, LP, EP or FR) with [3, 4]
∫ Manual Transfer (Dubbing)
[RAM] [-R] [-RW‹V›] [+R]
and press [ENTER].
≥About FR mode (l below)
(4)Press [2].
specifying the recording parts while watching them.
° Available discs for transfer (dubbing) from tape are DVD-RAM,
(5)Press [4].
[6] Set the time limit.
≥If you are not going to change
the recording time, press [4],
then skip to step 7.
DUBBING
Cancel All
Dubbing Direction
Off
Time Limit
VHS
DVD
Preparation
Mode
VHS-Video
SP
Off
Current Capacity: 2:00
≥Select the unit viewing channel (e.g. AV input) on the TV.
Time Limit
∫To change the setting
(1)Make sure “Time Limit” is
selected and press [1].
(2)Make sure “Time Limit” is selected and press [ENTER].
(3)Select time limit (“On” or “Off”) with [3, 4] and press
[ENTER].
≥“When you select “Off”, proceed to Step (6) below.
(4)Press [3, 4] to select “Set time” and press [ENTER].
(5)Press [2, 1] to select “Hour” and “Min.” and press [3, 4] to
set the recording time, and then press [ENTER].
≥You can also set the set time with the numeric buttons.
≥Maximum recording time is 8 hours.
DVD
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 8, 47)
VHS
≥Insert the video cassette containing the program to be copied.
(l 48)
≥Check the channel. If “DC” channel is selected, transfer (dubbing)
does not work properly.
- When the “DC” channel is selected on VHS, you cannot select the
“TP” channel on DVD.
(6)Press [2].
(7)Press [4].
[1] Press [VHS] and press [1, PLAY].
≥Start playing the video cassette and find the start point of the
recording.
[7] Make sure “Start
DUBBING
Cancel All
Dubbing” is selected
≥Select the audio to be played (the audio to be recorded)
beforehand.
≥The audio from the TV is recorded. To record your favorite
audio, select the audio by pressing [AUDIO]. (l 55)
Dubbing Direction
VHS
DVD
and press [ENTER].
≥The confirmation screen
appears.
Mode
VHS-Video
SP
Press ENTER to start dubbing.
1:15
Time Limit
Start Dubbing
[8] Select “Yes” with [2]
and press [ENTER].
[2] Press [;, PAUSE] at the start point of the
recording.
[3] Press [DVD].
ENTER
≥Transfer (dubbing) is started.
≥Transfer (dubbing) is automatically stopped when the tape
reaches the end or the remaining capacity of the disc is filled.
(A message appears on the TV screen and then disappears a
few seconds later.)
[4] Select “TP” channel with [INPUT SELECT] or
[CH, W, X].
≥The VHS picture is displayed on the TV.
∫To stop transfer (dubbing) in the middle
Press and hold [RETURN] for about 3 seconds or more.
[5] Press [REC MODE] to select the recording
mode. (l 25)
[6] Press [¥, REC].
∫About FR Mode
≥Disc recording and VHS play start at the same time.
When “Time Limit” is set to “Off” in Step 6 above:
≥The recording mode is automatically selected by estimating the
remaining capacity of the disc for transfer (dubbing) of only the
recorded parts in the video cassette (unrecorded parts will not
be recorded).
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause DVD and VHS at the same time.
∫To pause or stop recording
≥When you press [ENTER] to start transfer (dub), the tape is
automatically fast-forwarded to the end and then fast-rewound to
the beginning before the transfer (dubbing) is actually started. It
may take time to start transfer (dub). If the remaining capacity of
the disc is insufficient, the transfer (dubbing) will be stopped in
the middle.
Press [DVD] and [;, PAUSE] or [∫, STOP].
∫To pause or stop play
Press [VHS] and press [;, PAUSE] or [∫, STOP].
Note
≥When the transfer (dubbing) is already started, you can switch the
DVD/VHS output manually.
≥The recording is divided into titles every time the tape index
signals are detected.
When “Time Limit” is set to “On” in Step 6 above:
≥The recording mode is automatically determined by estimating
the remaining capacity of the disc for transfer (dubbing) of the
contents equivalent to the recording time set from the start point
of the transfer (dubbing) on the video cassette (unrecorded parts
will also be recorded).
∫About TP channel
(TP: Dubbing input channel)
When the TP channel is selected, it becomes possible for DVD to
receive audio and video signals from VHS. This enables dubbing
from VHS to DVD.
≥The TP channel can be selected by pressing [DVD] and pressing
[INPUT SELECT] or [CH, W, X] several times.
≥When you play back a tape after turning the channel to “TP”, the
picture on VHS is displayed on the TV screen. Utilizing this
feature, you can enjoy the picture on the tape in progressive
output. (l 50)
≥The recording is not divided into titles.
≥Compared to the TP channel, the DC channel enables VHS to
receive audio and video signals from DVD.
≥When the DC channel is selected on VHS, you cannot select the
TP channel on DVD.
58
VQT0N92
Transferring (Dubbing)
DVD VHS
Transfer (Dubbing) from DVD
∫When you transfer (dub) a whole disc
DVD/VHS POWER
TV
POWER
≥When “PB” flashes on the unit’s display of the DVD side, resume
function is activated.
In this case, press [∫, STOP] to de-activate it. (l 21)
VOLUME
CH
INPUT SELECT TV/VIDEO
INPUT SELECT
VHS
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
∫When you transfer (dub) a title from the beginning of
the selected title to the end of the disc
∫When you transfer (dub) a playlist from the
beginning of the selected playlist to the last playlist
Press [1, PLAY] to play back the desired title or playlist
(l 37).
CH, W, X
CANCEL/RESET
VCR Plus+
CM SKIP
AUDIO
SLOW/
AUDIO
SKIP/INDEX
REW SEARCH FF
s+
:, 9
PLAY
≥You can transfer (dub) (a title or playlist) while playback is
paused by pressing [;, PAUSE].
≥You cannot transfer (dub) the playlist which is longer than
8 hours. (When you transfer (dub) multiple playlists, the playlist
which is longer than 8 hours is omitted.)
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
3, 4, 2, 1
ENTER
[1] Press and hold [VHS —, DUBBING] for about 3
SUB MENU
RETURN
DISPLAY
STATUS
seconds or more (until “START” on the unit’s
S
RETURN
TIME SLIP
JET REW
display terminates flashing).
On the main unit, press [VHS —].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit
lights.
SCHEDULE
REC
REC MODE DVD ERASE ADD/DLT
µ
CREATE
REC MODE
DUBBING
VHS
VCR/TV
CHAPTER
DVD
VHS —
≥Dubbing is automatically completed when
playback of the disc is finished or the tape
reaches its end.
VHS
DVD
CH
REC
DUBBING
VHS
DVD
/k1.3
DUBBING indicator
∫To stop transfer (dubbing) in the middle
Press [∫, STOP].
∫ One Touch Transfer (dubbing)
Note
≥While One Touch Transfer (Dubbing) is activated, a scheduled
recording cannot be started.
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥If you start transfer (dubbing) when “PB” is blinking on the unit’s
display, the DVD is dubbed from the beginning of the title which
you stopped.
(DVD l VHS)
You can transfer (dub) titles recorded on a disc° onto a tape with one
touch of the button.
In One Touch Transfer (dubbing), all contents on the disc are
° Available discs for transfer (dubbing) onto tape are [RAM] [-R]
Preparation
∫About Recording VISS (l 54)
≥Select the unit viewing channel (e.g. AV input) on the TV.
In One Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired titles
with [: ] or [ 9].
≥Index signals will not be recorded automatically in the manual
transfer (dubbing) function (l 62). If you want to record index
signals, press [¥, REC] on the remote controller at the position
you want while transferring (dubbing) in VHS mode (l 10).
DVD
≥Insert the disc containing the program to be copied (l 8).
VHS
g
)
≥ Insert a video cassette with an accidental erasure prevention tab.
(l 48)
≥Confirm that the remaining tape time is sufficient for recording.
(l 55)
n
i
r
ng
er
bi
sf
ub
n
D
(
≥Select the recording mode. (l 51)
59
VQT0N92
Transferring (Dubbing)
DVD VHS
[6] Register titles and playlists for transfer
DVD/VHS POWER
(dubbing).
TV
POWER
≥If you are going to transfer a registered list without making any
changes to it, press [4], then skip to step 7.
VOLUME
CH
INPUT SELECT TV/VIDEO
∫To set for the
registration
DUBBING
OPERATION
SELECT
Current Remaining:
Dubbing List:
6:00
0:00 ( 0%)
Title Name
VHS
DVD
TRACKING/V-LOCK
Cancel All
DVD
Dubbing Direction
No.
Size
DVD
VHS
(1)Make sure “Create List” is
selected and press [1].
(2)Make sure “New Entry (Total
= 0)” is selected and press
[ENTER].
(3)Press [VHS —/A] to select
“Video” or press [“ DVD/B] to
select “Playlists”.
≥You can also select the view
by selecting “Other View”
from the SUB MENU.
1Press [SUB MENU].
2Make sure “Other View” is
selected and press
New Entry (Total = 0)
Mode
Video
SP
0
Numeric
buttons
Create List
AUDIO
DUBBING
CANCEL/RESET
VCR Plus+
CM SKIP
Current Remaining:
Dubbing List:
6:00
0:00 ( 0%)
Title Name
Cancel All
Dubbing Direction
No.
Size
SLOW/
DVD
VHS
SKIP/INDEX
REW SEARCH FF
New Entry (Total = 0)
Mode
:, 9
Video
SP
PLAY
Create List
DVD-RAM
1
;
Video
Playlists
∫
-
07
08
2:00 (SP)
-
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
10 10/25 Mon
123
8
ABC
10/25 Mon
Create List
DVD-RAM
Video
Playlists
3, 4, 2, 1
07
08
2:00 (SP)
-
-
ENTER
[ENTER] twice.
SUB MENU
RETURN
10 10/25 Mon
123
ABC
RETURN
S
the title or playlist and press
[ENTER].
≥You can register multiple
titles or playlists to the
dubbing list by repeating the
above steps 2-4.
(Dubbing list display and
convenient functions: l 61)
≥“To show other pages” l
below
SUB MENU
-
-
-
-
-
-
TIME SLIP
DUBBING
V
CHAPTE
STATUS
SCHEDULE
DISPLAY
JET REW
VHS
DVD
VHS —/A
A
B
“ DVD/B
Previous
Page 02/02
Next
Previous
ENTER
SUB MENU Select
Next
DUBBING
∫ GUI (Graphical User Interface) Transfer
(Dubbing)
[RAM] [-RW‹VR›]
Current Remaining:
Dubbing List:
No.
01 2:00 SP (33%) ABC
02 0:30 SP 7%) 123
6:00
Cancel All
Dubbing Direction
2:30 (42%)
Title Name
Size
DVD
VHS
Mode
(
Video
SP
New Entry (Total = 2)
onto a tape in combination.
° Available discs for transfer (dub) onto tape are [RAM] [-RW‹VR›].
Create List
Page 01/01
Create a dubbing list.
Start Dubbing
ENTER
≥“Multiple editing” l below
SUB MENU
(5)Press [2].
≥Before pressing [2], make
sure that the value on
“Dubbing list” is smaller than the value on “Current
Remaining”.
(6)Press [4].
Preparation
Registered titles
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Insert the disc containing the program to be copied (l 8).
VHS
≥ Insert a video cassette with an accidental erasure prevention tab.
(l 48)
[7] When you finish creating the
dubbing list,
DUBBING
Cancel All
Dubbing Direction
≥
Confirm that the remaining tape time is sufficient for recording. (l 55)
DVD
VHS
Make sure to select
“Start Dubbing” and
press [ENTER].
≥The confirmation screen
appears.
Mode
[1] Press [DVD].
[2] While both DVD and VHS are stopped
Press [FUNCTIONS].
[3] Select “DUBBING” with [
Press ENTER to start dubbing.
Video
SP
2
Create List
Start Dubbing
ENTER
3
,
4] and press [ENTER].
[8] Select “Yes” with [2] and press [ENTER].
[4] Set “Dubbing Direction”.
≥Transfer (dubbing) is started.
≥Set “Source” to “DVD”.
≥If you are not going to change the dub direction, press [4],
then skip to step 5.
∫To change the setting
∫To stop transfer (dubbing) in the middle
Press and hold [RETURN] for about 3 seconds or more.
(1)Make sure “Dubbing Direction” is selected and press [1].
(2)Make sure “Source” is selected and press [ENTER].
Various operations
∫To show other pages
Press [:, SKIP] or [9, SKIP].
≥Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER] to show other pages.
(3)Press [3, 4] to select “DVD”
DUBBING
and press [ENTER].
Cancel All
Source
Dubbing Direction
≥
When you set “Source” to
“DVD”, “VHS” is automatically
selected on “Destination”.
DVD
VHS
Destination
Mode
VHS-Video
SP
∫Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
(4)Press [2].
Press [ENTER] to register to the list.
(5)Press [4].
≥A check mark appears. Press [;, PAUSE] again to cancel.
≥When you switch between the “Video” and “Playlists” tab, the
check mark is canceled.
≥Titles or playlists are registered to the dubbing list in ascending
order of title number.
[5] Set the recording mode.
≥If you are not going to change
the recording mode, press [4],
DUBBING
Cancel All
Dubbing Direction
Video
SP
Format
DVD
VHS
Recording Mode
Mode
Video
SP
0
Create List
∫To Change the setting
(1)Make sure “Mode” is selected and press [1].
(2)Make sure “Recording Mode” is selected and press [ENTER].
(3)Select recording mode (SP, EP or VP) with [3, 4] and press
[ENTER].
(4)Press [2].
(5)Press [4].
60
VQT0N92
Transferring (Dubbing)
DVD VHS
To edit the transfer (dubbing) list
Select the item in step 6 (4). (l 60)
[1] Select a desired item with [3, 4] and press
[SUB MENU].
[2] Press [3, 4] to select the operation and press
∫ Transfer (Dubbing) a DVD-Video, finalized
DVD-R, DVD-RW (DVD-Video format), +R
tape for the set time while playing the disc.
Erase All
Add
[ENTER].
Erase
≥Operations and on screen displays during transfer
(dubbing) are also recorded.
Move
≥Almost all DVD-Video on sale have been treated to prevent
illegal copying, and cannot be transferred (dubbed).
≥The following cannot be transferred (dubbed): DVD-Audio, Video
CD, Audio CD and so on.
Erase All:
Erase all items registered on the transfer (dubbing) list.
≥Press [2, 1] to select “Yes” and press [ENTER].
Add:
After performing steps 1–5 of “GUI (Graphical User Interface)
Transfer (Dubbing)” (l 60),
Add new items to the transfer (dubbing) list.
≥Press [3, 4, 2, 1] to select the titles and playlists to be added
and press [ENTER].
[6] Set “Time Limit”.
DUBBING
Cancel All
≥If you are not going to change
On
Time Limit
Set time
Erase:
Erase the selected item.
≥Press [2, 1] to select “Yes” and press [ENTER].
≥Multiple editing is possible. (l 60)
Dubbing Direction
the setting, press [4], then skip
to step 7.
DVD
VHS
2:00
Mode
DVD-Video
SP
Current Remaining: 2:00
2:00
Time Limit
∫Setting the unit to
transfer (dub) according
to the set time
Set the time limit.
Start Dubbing
Move:
Move selected items or change the order of items on the transfer
(dubbing) list.
≥Press [3, 4] to select the destination and press [ENTER].
(1)Make sure “Time Limit” is
selected and press [1].
(2)Make sure “Time Limit” is selected and press [ENTER].
To cancel all registered transfer (dubbing) settings and lists
After performing steps 1–4 (l 60)
≥
Setting the unit to transfer (dub) all the content on the disc
(3)Press [3, 4] to select “Off” and press [ENTER].
(4)Press [2].
[1] Press [3, 4] to select “Cancel
DUBBING
All” and press [ENTER].
[2] Press [2, 1] to select “Yes”
Cancel All
≥Setting the transfer (dubbing) time
Dubbing Direction
DVD
VHS
(3)Press [3, 4] to select “On” and press [ENTER].
(4)Press [3, 4] to select “Set time” and press [ENTER].
(5)Press [2, 1] to select “Hour” and “Min.” and press [3, 4]
to set the recording time, and then press [ENTER].
≥You can also set the set time with the numeric buttons.
≥Maximum recording time is 8 hours.
and press [ENTER].
Mode
Press ENTER to cancel all settings.
Video
SP
≥The settings and lists may be
canceled in the following situations.
- When a title or a playlist has been recorded or erased at the
transfer (dubbing) source.
- When steps have been taken, for instance, to turn off the unit
or open the tray.
(6)Press [2].
(7)Press [4].
[7] Make sure “Start
DUBBING
Cancel All
Dubbing” is selected
Dubbing Direction
DVD
VHS
and press [ENTER].
Press [2] to select “Yes” and
press [ENTER] to start transfer
(dub).
Mode
DVD-Video
SP
Press ENTER to start dubbing.
2:00
Time Limit
Start Dubbing
ENTER
The disc top menu is displayed.
≥Disc play automatically begins
from title 1 when “First Title” is selected from the “Playback will
start with:” menu when finalizing the disc (l 31).
[8] When the top menu is
My favorite
01/02
01
Chapter 1
02
Chapter 2
displayed
03
04
Press [3, 4, 2, 1] to
select the title you want
to start transferring
(dubbing), and press
[ENTER].
Chapter 3
Chapter 4
05
Chapter 5
06
Chapter 6
07
Chapter 7
08
Chapter 8
g
)
n
i
r
Previous
Play
Next
ng
er
bi
sf
ub
≥While playing in order, all the titles after the selected title are
recorded until the set time.
n
D
(
≥After the last title on the disc has finished playing the top menu
is recorded until the set time is reached.
∫To stop transfer (dubbing) in the middle
Press [∫, STOP] or press and hold [RETURN] for about 3 seconds
or more.
Note
≥The screen on the right (screen saver) is recorded
at the beginning.
≥It is recorded as 1 title from the start of transfer
(dubbing) to the end (even if there are multiple
programs).
≥If play does not begin automatically or if the top menu does not
display automatically, press [1, PLAY] to start.
≥You can select the desired part of the video and then transfer (dub)
it while watching the video. (l 62)
61
VQT0N92
Transferring (Dubbing)
DVD VHS
∫About DC channel
(DC: Dubbing input channel)
DVD/VHS POWER
TV
POWER
When the DC channel is selected, it becomes possible for VHS to
receive audio and video signals from DVD. This enables dubbing
from DVD to VHS.
≥The DC channel can be selected by pressing [VHS] and
pressing [INPUT SELECT] or [CH, W, X] several times.
≥When you play back a disc after turning the channel to “DC”, the
picture on DVD is displayed on the TV screen.
≥Contrary to the DC channel, the TP channel enables DVD to
receive audio and video signals from VHS.
≥When the TP channel is selected on DVD, you cannot select the
DC channel on VHS.
VOLUME
CH
INPUT SELECT TV/VIDEO
INPUT SELECT
VHS
OPERATION
SELECT
VHS
DVD
TRACKING/V-LOCK
DVD
CH, W, X
SKIP/INDEX
AUDIO
PLAY
1
;
∫
DIRECT NAVIGATOR
FUNCTIONS
REC
REC MODE DVD ERASE ADD/DLT
µ
COPYING
VHS
VHS MENU
CREATE
REC MODE
VCR/TV
CHAPTER
DVD
∫ Manual Transfer (Dubbing)
You can transfer (dub) titles recorded on a disc onto a tape by
specifying the recording parts while watching them.
Preparation
DVD
≥Check the channel. If “TP” channel is selected, transfer (dubbing)
does not work properly.
- When the “TP” channel is selected on DVD, you cannot select the
“DC” channel on VHS.
VHS
≥ Insert a video cassette with an accidental erasure prevention tab.
(l 48)
≥ Confirm that the remaining tape time is sufficient for recording.
(l 55)
[1] Press [DVD] and press [1, PLAY].
≥Start playing the disc and find the start point of the recording.
≥Select the audio to be played (the audio to be recorded)
beforehand. [RAM]
≥The audio from the TV is recorded. To record your favorite
audio, select the audio by pressing [AUDIO]. (l 23) [RAM]
≥When a DVD-R, a DVD-RW (DVD-Video format) or a +R is
inserted, you cannot select the audio.
[2] Press [;, PAUSE] at the start point of the
recording.
[3] Press [VHS].
[4] Select “DC” channel with [INPUT SELECT] or
[CH, W, X].
≥The DVD picture is displayed on the TV.
[5] Press [1, PLAY].
≥Start playing the video cassette and find the start point of the
recording.
[6] Press [;, PAUSE] at the start point of the
recording, then press [¥, REC].
≥Put the unit in the recording standby mode.
[7] Press [REC MODE] to select the recording
mode. (l 51)
[8] Press [;, PAUSE].
≥VHS recording and disc play start at the same time.
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause DVD and VHS at the same time.
∫To pause or stop recording
∫To pause or stop play
Press [DVD] and press [;, PAUSE] or [∫, STOP].
Note
≥When the transfer (dubbing) is already started, you can switch the
DVD/VHS output manually.
62
VQT0N92
Transferring (Dubbing)
DVD VHS
Recording from an external device
When connecting to the IN2 input terminals on the front of the
unit
POWER
≥You can also connect to the IN1 input terminals on the rear of the
unit.
EJECT
L/MONO
S
VIDEO IN
C
Before connecting any cables, first make sure that the power for
the unit and the external device are off. Then, after connecting
cables, turn on both.
VIDEO IN
–
AUDIO IN
–
R
IN2
Note
≥When recording using the unit’s input terminals, only the sound
received at the time of recording will be recorded. As long as
secondary audio that is recorded on the media in the external device
is not output to the unit in play, it is not recorded.
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S-Video cable (not supplied)
(3) External device
(2)
(1)
≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO
terminal.
(Playback equipment)
(3)
Preparation
DVD [RAM] [-R] [-RW‹V›] [+R]
≥Release protection (disc l 30, cartridge l 30). [RAM]
≥Press [DVD].
VHS
≥Insert a video cassette with an accidental erasure prevention tab. (l 48)
≥Press [VHS].
[1] Press [REC MODE] to select the recording mode. (DVD l 25, VHS l 51)
≥DVD [RAM] [-R] [-RW‹V›] [+R]
- It is also possible to perform Flexible Recording (FR). (l 26)
[2] While stopped
Press [CH, W, X] or [INPUT SELECT] to select the input channel for the equipment you have
connected.
≥Select IN1 or IN2.
1 DVD
1 VHS
Follow the above steps 1 to 2.
Follow the above steps 1 to 2.
[3] Start play on the external device.
[4] Press [¥, REC] at the point where you want to
[3] Press [1, PLAY].
≥Start playing the video cassette and find the recording start
point.
start recording.
[4] Press [;, PAUSE], then press [¥, REC].
≥Put the unit in recording standby mode.
[5] Start play on the external device.
[6] Press [;, PAUSE] at the point where you want
to start recording.
∫To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
g
)
n
i
r
ng
er
bi
∫To stop recording
sf
ub
Press [∫, STOP].
n
D
(
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
63
VQT0N92
Reference
DVD VHS
Glossary
Bitstream
MP3 (MPEG Audio Layer 3)
This is a signal compressed and converted into digital form. It is
converted back to a multi-channel audio signal, e.g., 5.1-channel, by
a decoder.
An audio compression method that compresses audio to
approximately one-tenth of its size without any considerable loss of
audio quality. You can play MP3s you have recorded onto CD-R and
CD-RW.
CPRM (Content Protection for Recordable Media)
CPRM is technology used to protect broadcasts that are allowed to
be recorded only once. Such broadcasts can be recorded only with
CPRM compatible recorders and discs.
Pan & Scan/Letterbox
In general, DVD-Video are produced with the intention that they will
be viewed on a widescreen TV (16:9 aspect ratio), so images often
don’t fit regular TVs (4:3 aspect ratio). 2 styles of picture,
“Pan & Scan” and “Letterbox”, deal with this problem.
Decoder
A decoder restores the coded audio signals on DVDs to normal. This
is called decoding.
Pan & Scan:
The sides are cut off so the picture fills the screen.
Down-mixing
This is the process of remixing the multi-channel audio found on
some discs into two channels. It is useful when you want to listen to
the 5.1-channel audio recorded on DVDs through your TV’s
speakers. Some discs prohibit down-mixing. If this is the case, this
unit can only output the front two channels.
Letterbox:
Black bands appear at the top and bottom of the
picture so the picture itself appears in an aspect ratio
of 16:9.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs. Dynamic range compression
means reducing the gap between the loudest and softest sounds.
This means you can hear dialog clearly at low volume.
Playback control (PBC)
If a Video CD has playback control, you can select scenes and
information with menus displayed on the screen.
(The unit is compatible with version 2.0 and 1.1.)
Film and Video
DVD-Videos are recorded using either film or video. The unit can
determine which type has been used, then uses the most suitable
method of progressive output.
≥Film is 24 or 30 frames per second, with motion picture film
generally being 24 frames per second.
Progressive/Interlace
NTSC, the video signal standard, has 480 interlaced (i) scan lines,
whereas progressive scanning uses twice the number of scan lines.
This is called 480p.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your TV must be compatible to enjoy progressive video.
≥Video is 60 fields per second (2 fields making up 1 frame).
Finalize
A process that makes play of a recorded CD-R, CD-RW, DVD-R, etc.
possible on equipment that can play such media. You can finalize
DVD-R, DVD-RW (DVD-Video format) and +R on the unit. After
finalizing, the disc becomes play-only and you can no longer record
or edit. However, finalized DVD-RW can be formatted to become
recordable.
Protection
You can prevent accidental erasure by setting writing protection or
erasure protection.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
Formatting
Formatting is the process of making media such as DVD-RAM
recordable on recording equipment.
You can format DVD-RAM and DVD-RW (only as DVD-Video format)
on the unit.
Formatting irrevocably erases all contents on the disc.
Thumbnail
This refers to a miniature representation of a picture used to display
multiple pictures in the form of a list.
Frame and field
Frame refers to the single images that constitute the video you see
on your TV. Each frame consists of 2 fields.
TIFF (Tag Image File Format)
This is a system used for compressing/decoding color still pictures, a
common format for storing high quality images on digital cameras
and other devices.
Frame
Field
Field
+
=
≥A frame still shows 2 fields, so there may be some blurring between
them, but picture quality is generally better.
≥A field still shows less picture information so it may be rougher, but
there is no blurring.
JPEG (Joint Photographic Experts Group)
you select JPEG as the storage system on digital cameras, etc., the
data will be compressed to 1/10–1/100 of its original size. The
benefit of JPEG is less deterioration in picture quality considering the
degree of compression.
64
VQT0N92
Reference
DVD VHS
Frequently asked questions
Set up
Page
What equipment is necessary to
play multi channel surround
sound?
≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
15
–
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
Can the headphones and speakers ≥You cannot directly connect to the unit. Connect through the amplifier etc.
be directly connected to the unit?
15
15
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because the unit’s component video output terminal outputs
a progressive output signal.
Is my TV progressive output
compatible?
≥All Panasonic TVs that have 480p input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
–
Disc
Page
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if its region number does not include “1” or “ALL”.
–
7
Can a DVD-Video that does not
have a region number be played?
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
–
Please tell me about DVD-R, DVD-
RW, +R and +RW compatibility with
the unit.
≥The unit records and plays DVD-R, DVD-RW (DVD-Video format) and +R, and plays
DVD-RW (DVD Video Recording format) and +RW.
≥The unit also records and plays high speed recording compatible DVD-R, DVD-RW, +R
discs.
6, 7
6
Please tell me about CD-R and
CD-RW compatibility with the unit.
≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following
standards: CD-DA, Video CD, MP3 and still pictures (JPEG/TIFF). Close the session or
finalize the disc after recording. This unit can recognize up to 99 folders (groups) and 999
files (tracks) on a disc with MP3 or still pictures (JPEG/TIFF).
7, 23,
24
≥You cannot write to a CD-R or CD-RW with the unit.
7
Recording
Page
Can I record from a commercially
purchased video cassette or DVD?
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
–
Can DVD-R, DVD-RW (DVD-Video
format) and +R recorded on the unit
be played on other equipment?
≥You can play on compatible equipment such as DVD players after finalizing the disc on
this unit. However, depending on the condition of the recording, the quality of the disc and
capabilities of the DVD player, play may not be possible.
31
Can I record digital audio signals
using the unit?
≥You cannot record digital signals. The digital audio terminals on the unit are for output
only.
–
Can a digital audio signal from the ≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio
44
unit be recorded to other
equipment?
Output” settings to the following from the SETUP menu.
- PCM Down Conversion “On”
- Dolby Digital “PCM”
- DTS “PCM”
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with 48 kHz of sampling frequency.
≥You cannot record MP3 signals.
–
Can I switch to SAP during
recording?
≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, DVD-RW (DVD-Video format), +R you cannot. Change before recording
with “Select MTS” in the SETUP menu.
25
44
e
nc
e
r
e
f
Re
65
VQT0N92
Reference
DVD VHS
Error messages
∫ Common
On the unit’s display
Page
H, F
≥An error has occurred. The number following “H” or “F” depends on the status of the unit. Check
–
(“” stands for a number.)
the items in the “Error messages” section and the “Troubleshooting guide”. If the service number
still does not disappear after the check, follow the Reset procedure described below.
Reset procedure: (“The unit is on but cannot be operated.” l 68)
≥
If the service numbers fail to clear, note the service numbers and contact a qualified service person.
–
∫ DVD
On the TV
Page
Cannot finish recording
completely.
≥The program was copy-protected.
≥The disc may be full.
≥There are already 99 recorded titles ([+R] 49 recorded titles).
–
–
–
Cannot play.
≥You inserted an incompatible disc (Discs recorded in PAL video, etc.).
–
8
Cannot record on the disc.
Unable to format.
≥The disc may be dirty or scratched.
Please check the disc.
Cannot record. Disc is full.
≥Create space by erasing any unwanted titles. [RAM] [-RW‹V›]
[Even if you erase recorded content from the DVD-R or +R, there is no increase in disc space. Available
disc space on DVD-RW (DVD-Video format) increases only when the last recorded title is erased.]
≥Use a new disc.
22, 30,
33
Cannot record. The number
of titles has exceeded the
maximum limit.
–
–
Error has occurred. Please
press ENTER.
≥Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SLF CHECK” appears on the unit’s display).
No disc
≥You haven’t inserted a disc. Correctly insert a disc that the unit can play.
≥The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
6, 8
8
Please change the disc.
≥There may be a problem with the disc. Press [<, OPEN/CLOSE] to remove it and check it for
8
scratches or dirt. (The unit turns off automatically after you open the tray.)
This is a non-recordable disc. ≥The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R, DVD-
–
RW (DVD-Video format) or +R.
≥You inserted an unformatted DVD-RAM or DVD-RW. Format the disc with the unit.
This disc is not formatted
properly.
31
21
≥The operation is prohibited by the unit or disc.
On the unit’s display
Page
CHK REMOTE
≥The remote control and main unit are using different codes. Change the code on the remote
19
(“” stands for a number.)
control.
HARD ERR
NO READ
≥
If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.
–
≥The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥You have used a lens cleaner and it has finished. Press [<, OPEN/CLOSE] to eject the disc.
8
8
PLEASE WAIT
≥Displayed when the unit is started. This is not a malfunction.
≥The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE WAIT”
is displayed.
–
–
PROG FULL
SLF CHECK
≥There are already 16 scheduled recording programs. Delete unnecessary scheduled recording programs. 29, 53
≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the message disappears.
–
≥If “Quick Start” is set to “On”, “PLEASE WAIT” is displayed while the unit is carrying out its
recovery process. You cannot operate the unit while this is displayed.
–
UNSUPPORT
UNFORMAT
≥You have inserted a disc the unit cannot play or record on.
7
≥You have inserted an unformatted DVD-RAM or DVD-RW that is unformatted or recorded on
31
other equipment.
U59
≥The unit is very warm.
–
–
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan on the
rear of the unit.
U99
≥The unit fails to operate properly. Press [POWER Í/I] on the main unit to switch the unit to
standby. Now press [POWER Í/I] on the main unit again to turn the unit on.
∫ VHS
On the TV
Page
PLEASE PUT IN A VIDEO
CASSETTE.
≥A video cassette is not inserted when recording programs or setting the scheduled recording.
Insert a video cassette with an accidental erasure prevention tab.
48
PLEASE SET THE CLOCK.
≥The clock is not set when recording programs or setting the scheduled recording. Set the clock.
46
48
PLEASE USE A CASSETTE
WITH TAB.
≥
A video cassette without the accidental erasure prevention tab is inserted when recording programs or
setting the scheduled recording. Use a video cassette with an accidental erasure prevention tab.
66
VQT0N92
Reference
DVD VHS
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the
chart do not solve the problem, refer to the “Customer Services Directory” on page 73 if you reside in the U.S.A., or refer to “Product
information” on page 72 if you reside in Canada. In other areas, consult your dealer.
The following do not indicate a problem with the unit:
≥Regular disc rotating sound. The sound of the disc rotating may become louder especially when finalizing a DVD-R, DVD-RW (DVD-Video
format) or +R.
≥Poor reception due to atmospheric condition.
≥Image disturbance during search.
≥Periodic interruptions to reception due to satellite broadcasting breaks.
≥Operations do not work due to a poor-quality disc. (Try again using a Panasonic disc.)
≥The unit freezes due to the activation of one of its safety devices. (Press and hold [POWER Í/I] on the main unit for 10 seconds.)
∫ Common
Power
Page
No power
≥Insert the AC power supply cord securely into a known active AC outlet.
13
The unit switches to the standby ≥This is a power saving feature. Change “Off Timer” in the “SETUP” menu, if you would prefer.
43
–
mode.
≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the
unit on.
Displays
The display is dim.
Page
45
≥Change “Front Display” in the SETUP menu.
“12:00” is flashing on the unit’s ≥Set the clock.
46
display.
The recording time display, the ≥The time on the unit’s display and the remaining recording time on the screen may be
–
transfer (dubbing) process
display and the displayed
recording time of MP3 are
different from the actual time.
indicated less or more than the actual value.
≥In DVD-R or +R, the remaining capacity does not increase even if titles are erased.
≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last
recorded title is erased. It does not increase if other titles are erased.
≥If you repeat recording or editing about 200 times or more, the remaining capacity of the DVD-
R or the +R is reduced and then recording or editing may be disabled.
≥The time during fast forward and rewind, or the process during transfer (dub) may not be
displayed accurately.
–
–
–
–
Compared to the actual
recorded time, the elapsed time
displayed is less.
≥The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g.,actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
–
The tape counter isn’t changing. ≥The tape counter does not change while playing unrecorded parts. The “second” display
–
changes as follows:
–
≥The unit’s display also appears like this if the tape is dirty or damaged. Consult your dealer if
this is the case.
e
nc
e
r
e
f
Re
67
VQT0N92
Reference
DVD VHS
Operation
Page
Cannot operate the TV.
≥Change manufacturer code. Some TVs cannot be operated even if you change the code.
19
≥Press [TV/VIDEO] to change the input mode to “TV”.
26, 51
Cannot operate the DVD.
Cannot operate the VHS.
≥Press [DVD] when operating DVD.
10
10
≥Press [VHS] when operating VHS.
The remote control doesn’t
work.
≥The remote control code is wrong. Change to the correct code.
≥The batteries are depleted. Replace them with new ones.
≥Point the remote control at the remote control sensor on the main unit.
≥Remove obstacles between the remote control and main unit.
≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight
exposure.
19
11
11
–
–
≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the recording
or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.
–
The unit is on but cannot be
operated.
≥Some operations are prohibited by the disc.
–
–
–
≥The unit is warm (“U59” appears on the unit’s display). Wait until “U59” disappears.
≥One of the unit’s safety devices may have been activated.
Reset the unit as follows:
(1) Press [POWER Í/I] on the main unit to switch to standby.
If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for
about 10 seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC power supply cord, wait for about 1 minute, then
reconnect it.
(2) Press [POWER Í/I] to turn the unit on.
Cannot eject a disc.
Startup is slow
≥The unit is recording
–
–
≥The unit may have a problem. While the unit is off, hold down [∫] and [CH, W] on DVD side of
the main unit simultaneously for about 5 seconds. Remove the disc and consult the dealer.
≥Make sure that “Quick Start” is set to “On”.
Even if “Quick start” is set to “On”, startup is slow if the clock is not set, there was a power
failure or the AC plug has just been connected.
≥A few dozen seconds after turning on the unit, you can play a disc or start recording to discs
other than DVD-RAM.
43
–
≥Startup takes time for a few minutes after 4:00 a.m. due to system maintenance of this unit.
–
–
Takes time to read DVD-RAM
Picture
≥It may take time to read a disc if it is being used for the first time in this unit or it has not been
used for a long time.
Page
TV reception worsens after
connecting the unit.
≥This can occur because the signals are being divided between the unit and other equipment. It
can be solved by using a signal booster, available from audio-visual suppliers.
–
The images from the unit do not ≥Make sure that the TV is connected to the VIDEO OUT terminal, S-VIDEO OUT terminal or
13, 15
appear on the TV.
COMPONENT VIDEO OUT terminals on the unit.
≥Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.
≥The TV isn’t compatible with progressive signals. Press and hold [∫] and [“ DVD, DUBBING]
on DVD of the main unit at the same time for about 5 seconds. The setting will change to
interlace.
–
–
Picture is distorted.
68
VQT0N92
Reference
DVD VHS
Recording, Scheduled recording, Transfer (dubbing), External input
Page
Scheduled recording does not
work properly.
≥When connected to cable TV box or satellite receiver, the VCR Plus_ system does not work.
–
≥The scheduled recording program is incorrect or different scheduled recording times overlap. 29, 53
Correct the program.
VCR Plus_ system does not
work properly.
≥The clock is not correct. Set the clock.
46
17
17
≥Correct the guide channels with “VCR Plus_ Ch. Setting” in the SETUP menu.
≥The same guide channel is set to 2 or more channel positions. Set the guide channel correctly
or delete unnecessary channels.
≥Scheduled recording will not be activated during formatting, transfer (dubbing) and other such
operations which should not be interrupted when they are being carried out.
–
Scheduled recording does not
stop even when [∫, STOP] is
pressed.
29, 53
43
≥Press [∫, STOP] and then [ENTER] within 5 seconds to turn “ ” off. Recording stops.
≥If you start recording immediately after turning on the unit while “Quick Start” is set to “On”,
you cannot then stop recording for a few seconds.
The scheduled recording
program remains even after
recording finishes.
≥The scheduled recording program remains if set to daily or weekly.
29, 53
Cannot transfer (dub) VHS to
DVD.
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with “DISC
MANAGEMENT”.
≥“TP” channel is not selected on DVD when recording from a video tape to a disc. Select “TP”
channel.
≥Some video tapes on the market (including rental videos) are copy-protected to prevent illegal
reproductions. Copy-protected video tapes cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the Scheduled
Recording List screen, the VHS menu screen, etc. are displayed.
30
58
–
–
Cannot transfer (dub) DVD to
VHS.
≥A video cassette without the accidental erasure prevention tab is inserted. Use a video
cassette with an accidental erasure prevention tab.
≥“DC” channel is not selected on VHS when recording from a disc to a video tape. Select “DC”
channel.
≥Some DVDs on the market (including rental DVD) are copy-protected to prevent illegal
reproductions. Copy-protected DVDs cannot be properly recorded.
≥You cannot use the transfer (dubbing) function when the FUNCTIONS window, the Scheduled
Recording List screen, the VHS menu screen, etc. are displayed.
48
62
–
–
The sound level after editing is ≥The sound level on DVD and VHS may not match depending on the disc. When the sound
–
–
not equal on DVD and on VHS.
level in a particular part of the sound source is soft or loud, the sound may be recorded loudly
or softly on a video tape.
Stripe-shaped black noise is
recorded.
≥The device in playback is interfering with the TV because the device is too close to the TV.
Move the device away from the TV.
Cannot record video or sound
from the external device.
≥The external device is not correctly connected.
≥The proper external input channel (IN1 or IN2) is not selected.
63
63
e
nc
e
r
e
f
Re
69
VQT0N92
Reference
DVD VHS
∫ DVD
DVD Picture
Page
45
Status messages do not appear. ≥Select “Automatic” in “Status Messages” in the SETUP menu.
The blue background does not ≥Select “On” in “Blue Background” in the SETUP menu.
45
appear.
The 4:3 aspect ratio picture
expands left and right.
≥Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in
the Video menu to “Off”.
41
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video”, or “4:3 TV Settings for
DVD-RAM” in the SETUP menu.
45
41
41
Screen size is wrong.
There is a lot of after-image
when playing video.
≥Set “MPEG-DNR” in the Video menu to “Off”.
When playing DVD-Video using ≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or
progressive output, one part of
the picture momentarily appears
to be doubled up.
There is no apparent change in ≥The effect cannot be seen with certain types of video.
–
picture quality when adjusted
with the Video menu in the on-
screen menus.
DVD Sound
Page
No sound.
Low volume.
≥Check the connections and “Digital Audio Output” settings. Check the input mode on the
amplifier if you have connected one.
13–15,
44
Distorted sound.
Cannot hear the desired audio
type.
≥Press [AUDIO] to select the audio.
23, 25
41
≥Set “V.S.S.” in the Audio menu to “Off” in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast titles.
≥The disc may have a restriction on the method of audio output. If “D.MIX” does not appear in
the display when playing multi-channel DVD-Audio, only audio for the two front channels will
be output. Refer to the disc’s jacket. [DVD-A]
–
Cannot switch audio.
≥You cannot change the audio type when a DVD-R, a DVD-RW (DVD-Video format) or a +R is
in the disc tray.
–
≥You cannot change the audio type when playing a DVD-R, a DVD-RW (DVD-Video format) or
a +R. (You can select “Main” or “Secondary Audio Program (SAP)” in “Select MTS” in the
SETUP menu before recording.)
44
≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio
cables (analog connection).
≥There are discs whose audio cannot be changed because of how the disc was created.
15, 44
–
DVD Play
Page
Play fails to start even when
[1, PLAY] is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥The disc is dirty.
≥You tried to play a blank disc or a disc that is unplayable on the unit.
≥You tried to play a +RW that needs to be finalized on the equipment used for recording.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players
that are compatible with DVD-RAM. In this case use EP (6H) mode.
8
8
6, 7
–
43
Audio and video momentarily
pause.
≥This occurs between playlist chapters.
≥This occurs as scenes change during Quick View.
–
21
DVD-Video is not played.
≥Some DVD-Video cannot be played when you change the ratings level.
43
Alternative sound track and
subtitles cannot be selected.
≥Multiple languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
–
21
No subtitles.
≥When progressive output is on, closed captions cannot be displayed.
≥Subtitles are not recorded on the disc.
–
–
≥Set “Subtitle” in the Disc menu to “On”.
40
Angle cannot be changed.
≥This function depends on software availability. Angles can only be changed during scenes
where different angles are recorded.
–
–
You have forgotten your ratings ≥With the tray open, keep pressing [¥, REC] and [1/k1.3] on DVD side of the main unit
password.
simultaneously for about 5 or more seconds.
Quick View does not work.
≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
–
–
The resume play function does ≥This function only works when “PB” is flashing in the unit’s display.
not work. ≥Memorized positions are canceled when the unit is turned off or when the tray is opened. The
memorized position on the playlist is also canceled when the playlist and title are edited.
21
–
70
VQT0N92
Reference
DVD VHS
DVD recording, scheduled recording
Page
Cannot record.
≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the
6
unit can record onto.
≥The disc is unformatted. Format the disc. [RAM] [-RW‹V›]
31
≥The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with
“DISC MANAGEMENT”.
30
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is full or nearly full. Erase unneeded titles or use another disc.
≥You cannot record on finalized DVD-R, DVD-RW (DVD-Video format), +R or DVD-RW
(DVD Video Recording format) discs.
6, 64
22, 30, 33
31
≥If you repeatedly insert discs or turn the unit on and off about 50 times or more, the
recording or editing of DVD-R, DVD-RW (DVD-Video format), +R may be disabled.
≥A DVD-R, DVD-RW (DVD-Video format), +R recorded on the unit may not be recordable
on other Panasonic DVD recorders.
–
–
≥The material you are trying to record is copy-protected.
≥Scheduled recording will not be activated when in editing or transfer (dub). Scheduled
recording will begin after the editing/transfer (dub) is finished.
–
–
A part or whole of a recorded
title has been lost.
≥If the power shuts down or the plug is disconnected from the household AC outlet while
recording or editing, the program may be lost or the disc may become unusable. We cannot
offer any guarantee regarding lost titles or discs. You will have to format the disc
([RAM] [-RW‹V›]) or use a new disc.
–
DVD Edit
Page
Cannot format.
≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that is not compatible with the unit.
8
7
Cannot create chapters.
≥The unit writes the chapter division information to the disc when you turn it off or remove
the disc. The information is not written if there is an interruption in the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point
before a start point.
–
Cannot mark the start point or
the end point during “Shorten
Title” operation.
–
–
Cannot erase chapters.
≥When the chapter is too short to erase, use “Combine Chapters” to make the chapter
35
longer.
The available recording time
doesn’t increase even after
≥Available recording space on the DVD-R or the +R does not increase even after erasing
previously recorded titles.
–
–
erasing recordings on the disc. ≥Available recording space on a DVD-RW (DVD-Video format) increases only when the last
recorded title is erased. It does not increase if other titles are erased.
Cannot create a playlist.
≥You cannot select all the chapters in a title at once as the source of playlist edition if the title
–
also includes still pictures. Select them individually.
∫ VHS
VHS Picture
Page
OSD messages do not appear.
≥Go to VHS MENU and select “ON” in “OSD”.
54, 55
Press [STATUS] to show the on-screen messages constantly.
The blue back appears during
play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue
back to appear. Consult your dealer.
–
–
VHS Sound
Page
Cannot hear the desired audio
type.
≥Press [AUDIO] to select the audio.
55
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
50
–
VHS Play
Page
Cannot play.
≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be
–
e
played.
nc
e
r
The playback screen flickers.
≥The video head is dirty.
≥The tape is too old or damaged.
–
–
e
f
Re
VHS Recording, scheduled recording
Page
“1” flashes when I try to start ≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.
48
recording.
Cannot record.
Cannot record TV program.
≥The desired channel is not selected. Select the desired TV program.
–
71
VQT0N92
Reference
Product Service
1. Damage requiring service — The unit should be serviced by qualified service personnel if:
(a)The AC power supply cord or AC adaptor has been damaged; or
(b)Objects or liquids have gotten into the unit; or
(c)The unit has been exposed to rain; or
(d)The unit does not operate normally or exhibits a marked change in performance; or
(e)The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts — When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the
same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
∫ Product information
For product information or assistance with product operation:
In the U.S.A., refer to “Customer Services Directory” on page 73.
authorized Servicentre closest to you.
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
MODEL NUMBER
SERIAL NUMBER
DMR-ES30V
TELEPHONE NUMBER
72
VQT0N92
Reference
Limited Warranty (ONLY FOR U.S.A.)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic DVD Recorder
Limited Warranty
Limited Warranty Coverage
Limited Warranty Limits And Exclusions
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively
referred to as “the warrantor”) will, for the length of the period indicated on the chart below,
which starts with the date of original purchase (“warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with a new or a
refurbished product. The decision to repair or replace will be made by the warrantor.
This warranty ONLY COVERS failures due to defects in materials or workmanship, and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES
NOT COVER damages which occurred in shipment, or failures which are caused by
products not supplied by the warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or
other business), rental use of the product, service by anyone other than a Factory
Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
Product or Part Name
Parts
Labor
DVD Recorder
One (1) Year
One (1) Year
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY. (As examples, this excludes damages for lost time, travel
to and from the servicer, loss of media or images, data or other recorded
content. The items listed are not exclusive, but are for illustration only.) ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Rechargeable Batteries,
DVD-RAM Disc (in
exchange for defective
item)
Ten (10) Days
Not Applicable
During the “Labor” warranty period there will be no charge for labor. During the “Parts”
warranty period, there will be no charge for parts. You must carry-in or mail-in your product
during the warranty period. If non-rechargeable batteries are included, they are not
warranted. This warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original purchaser of a new
product which was not sold “as is”. A purchase receipt or other proof of the original purchase
date is required for warranty service.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (7262) or visit
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax
(787)-768-2910.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. If a problem with this product develops
during or after the warranty period, you may contact your dealer or Servicenter.
If the problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts
and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
e
nc
e
r
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
e
f
Re
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
F1003
73
VQT0N92
Reference
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a
period as stated below from the date of original purchase.
Panasonic DVD Recorder One (1) year, parts and labour
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to
usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any
way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries
are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required
before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of
implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our Customer Care Centre at:
For product repairs, please contact one of the following:
≥Your Dealer who will inform you of an authorized Servicentre nearest you.
≥A Panasonic Factory Servicentre listed below:
Richmond,
Calgary, Alberta
Mississauga, Ontario
Lachine, Québec
British Columbia
Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC
V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627
Panasonic Canada Inc.
Panasonic Canada Inc.
5770 Ambler Dr.
Mississauga, ON
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC
H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
th
6835-8 St. N. E.
Calgary, AB
T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
74
VQT0N92
Reference
Specifications
∫VHS
Recording format
Heads
Power Supply:
Power Consumption:
AC 120k(1 10%)V, 50/60 Hz 10%
31 W
(Approx. 10 W in Quick start standby
mode/Approx. 9 W in power save mode)
(Approx. 4 W in Normal standby mode/
Approx. 2 W in power save mode)
VHS Video Cassette System Standard with FM audio
4 helical scan heads for video
2 helical scan heads for FM audio
1 fixed head for Normal audio
NTSC SP: 33.35 mm/s, 120 min
NTSC EP: 11.12 mm/s, 360 min
(with T-120 cassette)
Recording modes/
recording time
∫DVD
Recording format
others
FF/REW: approx. 54 s,
Jet REW: approx. 36 s (with T-120 cassette)
DVD-RAM: DVD Video Recording format
DVD-R, DVD-RW: DVD-Video format
Video: MPEG2
Video data
Audio: Dolby Digital 2 CH
System with 1 lens, 2 integration units
(wavelength: 662 nm for DVD, 795 nm for CD)
Horizontal resolution: More than 200 lines
Signal to Noise Ratio: More than SP: 40 dB
EP: 40 dB
Frequency Response: SP, EP: j4.5 to 4.0 dB at 2 MHz (0 dB at 0.1 MHz)
Audio data
Optical pickup
Recording disc
DVD-RAM: Ver. 2.0
Ver. 2.1/3k-SPEED DVD-RAM Revision 1.0
Ver. 2.2/5k-SPEED DVD-RAM Revision 2.0
for General Ver. 2.0
for General Ver. 2.0/4k-SPEED DVD-R Revision 1.0
Dynamic Range:
Hi-Fi: more than 90 dB
Frequency Response: Hi-Fi: 20 Hz to 20 kHz (0 dB 3 dB)
Normal SP: 80 Hz to 8 kHz (0 dB 4 dB)
Normal EP: 80 Hz to 4 kHz (j1 dB 5 dB)
Signal to Noise Ratio: Hi-Fi: more than 65 dB
Normal SP: more than 43 dB
DVD-R:
+R:
for General Ver. 2.x/8k-SPEED DVD-R Revision 3.0
DVD-RW: Ver. 1.1
Ver. 1.1/2k-SPEED DVD-RW Revision 1.0
Ver. 1.2/4k-SPEED DVD-RW Revision 2.0
Ver. 1.0
Ver. 1.1
Ver. 1.2
XP: approx. 10 Mbps/approx. 60 min
SP: approx. 5 Mbps/approx. 120 min
LP: approx. 2.5 Mbps/approx. 240 min
EP: approx. 1.7/1.2 Mbps/approx. 360/480 min
(with 4.7 GB disc)
DVD-RAM, DVD-R, DVD-RW, +R, +RW,
DVD-Video, DVD-Audio, Video CD, CD-Audio (CD-DA),
CD-R/CD-RW (MP3, JPEG, CD-DA, Video CD
formatted discs)
Normal EP: more than 41 dB
Cross Talk:
Wow and Flutter:
More than 50 dB at 1 kHz (Hi-Fi)
Hi-Fi: less than 0.005%
Normal SP: 0.2% max
Normal EP: 0.4% max
Recording mode/
recording time
∫DVD/VHS Common
Video interface
TV system:
Input:
NTSC
Playable discs
L1:
RCA:
CVBS: 1 Vp-p
Zin: 75 ohm
Zin: 75 ohm
Zin: 75 ohm
Zin: 75 ohm
Zout: 75 ohm
S-Video:
Y: 1 Vp-p, C: 0.286 Vp-p
Video interface
Output:
L2:
RCA:
S-Video:
CVBS: 1 Vp-p
Y: 1 Vp-p, C: 0.286 Vp-p
RCA:
S-Video:
CVBS: 1 Vp-p
Y: 1 Vp-p, C: 0.286 Vp-p
Zout: 75 ohm
Zout: 75 ohm
Output:
RCA:
RCA (YPBPR):
Y: 1 Vp-p, PB: 0.7 Vp-p, PR: 0.7 Vp-p
Zout: 75 ohm
CVBS: 1 Vp-p
Audio interface
Input:
Audio interface
Output:
L1:
RCA:
Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zout: less than 1 k≠, Load: 10 k≠
Optical Output connector
(PCM, Dolby Digital, DTS)
RCA:
Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zin: 22 k≠
Digital Audio:
L2:
RCA:
Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zin: 22 k≠
Video data
Horizontal resolution: More than
XP: 500 lines
LP: 500 lines
Signal to Noise Ratio: More than 45 dB
Output:
RCA:
SP: 500 lines
EP: 250 lines
DVD:
Standard: 309 mVrms, FS: 2 Vrms at 1 kHz
Zout: less than 1 k≠, Load: 10 k≠
Frequency Response: XP, SP: 0 dB 3 dB at 4 MHz (0 dB at 0.1 MHz),
VHS:
309 mVrms
Zout: less than 1 k≠, Load: 10 k≠
(Fine mode)
LP, EP: 0 dB 3 dB at 2 MHz (0 dB at 0.1 MHz),
(Fine mode)
Tuner RF
Tuner system/
NTSC-M
Audio data
Dynamic Range:
Channel coverage:
VHF: 2 ch to 13 ch 75 ohm
UHF: 14 ch to 69 ch 75 ohm
CATV: 5A & A-5 ch to EEE ch 75 ohm
One tuner (DVD and VCR common use)
Provide 3ch or 4ch 75 ohm
Rec/PB: more than 90 dB
DVD-Video PB (with LPCM): more than 96 dB
CD PB: more than 96 dB
Frequency Response: XP, SP, LP, EP (6H mode): 20 Hz to 20 kHz (0 dB 3 dB)
RF converter:
EP (8H mode): 20 Hz to 12 kHz (0 dB 3 dB)
e
Cross Talk:
More than 60 dB at 1 kHz
nc
Dimensions
Mass
Approx. 430 mm (W)k89 mm (H)k352 mm (D)
e
r
[Approx. 1615 16q (W)k39 16q (H)k137
/ / /8q (D)]
e
f
Approx. 5.8 kg (12.79 lbs.)
LASER Specification
Class 1 LASER Product
Re
Operating Temperature 5oC to 40oC (41oF to 104oF)
Operating Humidity
35% to 80% RH (no condensation)
795 nm, 662 nm
Wave Length:
Laser Power:
No hazardous radiation is emitted with safety
protection
Note
Mass and dimensions shown are approximate.
Specifications are subject to change without notice.
75
VQT0N92
Reference
Index
Picture ........................................................................................... 41
Playlist........................................................................................... 36
Properties
playlist ........................................................................................ 37
title.............................................................................................. 33
Channel
adding, deleting ..........................................................................17
Cleaning
disc, lens, main unit ......................................................................8
Clock setting ..................................................................................46
Connection
antenna, television......................................................................13
cable TV box/satellite receiver....................................................14
Quick Start................................................................................8, 43
disc............................................................................................. 30
title.............................................................................................. 34
Repeat play ................................................................................... 41
Shorten (titles)............................................................................... 34
Transfer......................................................................................... 41
V.S.S. ............................................................................................ 41
Angle..............................................................................................40
Audio
attributes.....................................................................................40
Chasing play..................................................................................27
Create chapters ......................................................................22, 35
Create playlists ..............................................................................36
Enter Name
Audio ............................................................................................. 55
Intact erasure prevention tab......................................................... 48
Remaining tape time ..................................................................... 55
Repeat Playback ........................................................................... 50
Scheduled recording ..................................................................... 52
SQPB ............................................................................................ 50
Tracking......................................................................................... 50
VISS .............................................................................................. 54
VP mode........................................................................................ 51
disc .............................................................................................30
Erase
chapter........................................................................................35
Flexible Recording.........................................................................26
Language
audio...........................................................................................43
code list.......................................................................................45
on-screen....................................................................................45
subtitle .................................................................................40, 43
Manual Transfer (Dubbing)............................................................58
MP3 ...............................................................................................23
MPEG-DNR ...................................................................................41
One Touch Transfer (Dub).............................................................57
76
VQT0N92
Español
Cómo empezar
≥Antes de conectar, apague todo equipo y lea las instrucciones correspondientes de funcionamiento.
Referencia
≥Las conexiones del equipo descritas sirven en concepto de ejemplo.
≥Los equipos periféricos y los cables opcionales se venden por separado si no está indicado de otro modo.
Conexión con un televisor y un VCR
indica los accesorios incluidos.
indica los accesorios no incluidos.
Cable del
televisor
TV
Antena al aire
libre
∫Conexión (sin cable audio/vídeo)
La unidad envía una señal al televisor a través del cable
AUDIO IN
VHF/UHF
RF IN
coaxial de 75 ≠ en el canal 3 o 4. Es posible ver la
imagen de vídeo en su televisor de la misma manera
que la que ve en los programas TV.
VIDEO IN
R
L
Antena interior
≥Después de esta conexión, ajuste el canal de salida
RF “CH3” o “CH4” (l 78).
∫Conexión (con cable audio/vídeo)
Conecte por orden numérico de 1 a 4.
≥Conecte por orden numérico, ajuste “OFF” del canal
de salida RF (l 78).
Cable de la antena
Partidor
Cable
Audio/
Vídeo
4
75 ≠ cable coaxial
1
1
2
2
RF IN
Y
P
B
PR
DVD/VHS COMMON OUT
R - AUDIO - L
VIDEO
COMPONENT VIDEO OUT
(480p/480i)
S
VIDEO
OPTICAL
R - AUDIO - L
VIDEO
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
RF OUT
R - AUDIO - L
DVD OUT
VIDEO
S
VIDEO
VHF/UHF
IN
1
Al IN1
75 ≠ cable coaxial
3
3
Ventilador de
refrigeración
A la toma doméstica CA
(CA 120 V, 60 Hz)
Cable audio/vídeo
Utilice un partidor si quiere también
conectar la antena a su VCR.
Rojo
Grabadora de
cassette de vídeo
Cable de alimentación CA
Sólo conecte a la toma de CA
Blanco
doméstica después de terminar todas
las demás conexiones.
R
L
VIDEO
VHF/UHF
RF IN
Amarillo
AUDIO OUT OUT
∫ Conexión al terminal S-VIDEO IN
Sólo DVD
∫
Conexión a los terminales COMPONENT VIDEO IN
Sólo DVD
Terminal S-VIDEO OUT
Terminal COMPONENT VIDEO OUT
El terminal S-VIDEO OUT hace conseguir una imagen más nítida
que el terminal VIDEO OUT. (Los resultados reales dependen del
televisor.)
Estos terminales pueden ser usados para la salida sea entrelazada
sea progresiva y para proporcionar una imagen más nítida que el
terminal de S-VIDEO OUT.
≥Conecte a los terminales del mismo color.
TV
(1) Terminales de entrada de audio (L/R)
(2) Terminal de entrada S-Vídeo
(3) Cable de audio (no suministrado)
A Rojo (R)
(1) Terminales de entrada componente
(2) Terminales de entrada de audio (L/R)
(3) Cable de vídeo del componente
(no suministrado)
(4) Cable de audio (no suministrado)
A Rojo (R)
TV
(1)
AUDIO IN
(2)
(1)
COMPONENT
VIDEO IN
(2)
VIDEO IN
R
L
S VIDEO IN
AUDIO IN
R
L
B Blanco (L)
(4) Cable S-Vídeo (no suministrado)
(5) Panel trasero de la unidad
(6) Terminales de salida de audio (L/R)
(7) Terminal de salida S-Vídeo
(3)
(4)
B Blanco (L)
(4)
(3)
(5) Panel trasero de la unidad
(6) Terminales COMPONENT VIDEO
OUT
P
R
COMMON OUT
-
AUDIO
-
VIDEO
Y
P
B
PR
ONENT VIDEO OUT
(480p/480i)
COMMON OUT
-
AUDIO
-
VIDEO
R
-
AUDIO
-
COMPONENT VIDEO OUT
(480p/480i)
(7) Terminales de salida de audio (L/R)
AL
R
AUD
VIDEO
S
VIDEO
(6)
(6)
DVD OUT
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
(5)
(7)
R
AUD
VIDEO
S
VIDEO
(7)
DVD OUT
(5)
∫
Cuando la unidad no ha de ser usada durante un largo tiempo
∫Accionamiento rápido
Para ahorrar energía, desenchúfela de la toma doméstica CA. Esta
unidad consuma una pequeña cantidad de corriente aun cuando
está apagada.
Inicio rápido de 1 s. para grabar en el DVD-RAM°
° A partir del estado de apagado, la grabación en el DVD-RAM
l
inicia cerca de 1 segundo después de pulsar antes [Í, DVD/VHS
POWER] y luego de pulsar secuencialmente [¥, REC] (Modo de
Accionamiento rápido).
ño
Consumo de corriente en la espera
pa
s
E
Visualización frontal
Automático
Aprox. 9 W
Aprox. 2 W
Alta
Act
Aprox. 10 W
Aprox. 4 W
Accionamiento
rápido
Des
77
VQT0N92
Cómo empezar
Reproducción
DVD
Sintonización automática por enchufe
DVD/VHS POWER
TV
CH, W, X
POWER
Operaciones preliminares
Í
≥Encienda el televisor y seleccione la entrada de vídeo
correspondiente para conformar las conexiones a esta unidad.
(Por ejemplo: la entrada AV, CH3 o CH4)
VOLUME
CH
INPUT SELECT TV/VIDEO
TV/VIDEO
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
DVD
≥
Si conecta la unidad a una caja del televisor de cable o a un receptor de
satélite, sintonice su PBS local para que funcione el ajuste automático
del reloj. Si no hay PBS local, ajuste el reloj manualmente (“Ajustar
manualmente el reloj”).
CH, W, X
Teclas
numéricas
AUDIO
≥Pulse [DVD].
VCR Plus+
CM SKIP
CANCEL/RESET
Select Language
Seleccione la Lengua
Sélection de Langue
VCR Plus+
CM SKIP
[1] Pulse [Í, DVD/VHS POWER].
[2] Pulse [CH, W, X] para seleccionar un
número de canal de salida RF.
SLOW/
SKIP/INDEX
REW SEARCH FF
English
Español
Français
:, 9
6, 5
PLAY
Conexión (sin cable audio/vídeo):
Seleccione “CH3” o “CH4” que visualiza
la pantalla a la derecha.
Conexión (con cable audio/vídeo):
Seleccione “OFF”.
1
;
∫
Press ENTER
Pulse ENTER
Appuyer sur ENTER
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
DIRECT NAVIGATOR
FUNCTIONS
3, 4, 2, 1
2;, ;1
ENTER
Visualización de la unidad
Visualización de la unidad
Cada vez que pulsa la tecla:
CH 3 (ajuste predeterminado) ,. CH4 ,. OFF
^------------------------------------------J
SUB MENU
RETURN
TIME SLIP
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
[3] Utilice [3, 4] para seleccionar el idioma y pulse [ENTER].
[4] Pulse [ENTER] para iniciar la sintonización automática por enchufe.
≥Luego, la unidad procede al ajuste automático del reloj. El
temporizador se visualiza cuando finaliza.
SCHEDULE
TIME SLIP
REC
REC MODE DVD ERASE ADD/DLT
CREATE
DVD ERASE
VCR/TV
CREATE CHAPTER
¥
DUBBING
VHS DVD
VCR/TV
CHAPTER
REC MODE
[5] Pulse [ENTER].
∫IIntroducción de discos
Si el reloj adelanta o atrasa una hora respecto a la hora actual
[1] Pulse [
≥Puede Ud. insertar un disco de cartucho o sin cartucho.
[2] Pulse [
<, OPEN/CLOSE] en la unidad principal para abrir la bandeja.
Seleccione “j1” o “i1” en “Ajustar del huso horario” en el menú SETUP.
Si la unidad no puede ajustar automáticamente el reloj
Ajuste la hora manualmente. (“Ajustar manualmente el reloj”)
<, OPEN/CLOSE] en la unidad principal para cerrar la bandeja.
≥Al introducir un DVD-RAM con la lengüeta de protección de
escritura ajuste a “PROTECT (PROTEGER)”, la reproducción
comienza automáticamente.
Ajustes del canal de guía para el sistema VCR Plus+
Ajuste estos canales de guía de manera que se pueda usar el
sistema VCR Plusi para la grabación temporizada. Antes de
proceder a los ajustes, prepare el papel que muestra los canales, los
nombres de las estaciones y los canales de guía.
Nota
≥Tiene que cargarse un disco de doble cara con el lado que quiere
grabar/reproducir mirando hacia abajo.
No es posible grabar continuamente de un lado de un disco de doble
cara al otro. Es necesario que se expulse el disco y se lo revuelva.
por ej.: Nombre de la
Canal
de guía
Número
del canal°°
Ajuste del canal
Innecesario
≥
estación
°
CBS
04
04
≥Cuando utiliza un DVD-RAM de 8 cm (3q) o DVD-R de 8 cm (3q),
quite el disco del cartucho.
Introduzca el canal 15
sucesivo al canal de guía 33.
HBO
33
15
Disco sin cartucho
Disco de cartucho
Introduzca el canal 20
sucesivo al canal de guía 38.
(1)
(2)
Nickelodeon
38
20
° Mire en los canales de guía para las estaciones en revistas.
°° Apunte todas las estaciones que puede recibir.
≥Si ha conectado una caja de televisor de cable o un receptor de
satélite, el sistema VCR Plusi no funciona, así que no debe
ajustar los canales de guía.
DVD
[1] Durante la parada
(3)
Pulse [FUNCTIONS].
(1) Inserte etiqueta arriba.
[2] Seleccione “Otras funciones” con
[3
,
4
]
y pulse [ENTER].
(2) Insértelo completamente en su lugar hasta que haga un ruido seco.
(3) Insertar el disco con la etiqueta hacia arriba y la flecha hacia el interior.
[3] Seleccione “SETUP” con [3, 4] y pulse [ENTER].
[4] Seleccione “Canal” con [3, 4] y pulse [2, 1].
[5] Seleccione “VCR Plus
r
Ajuste canal” con [
3
,
4], luego pulse [ENTER].
Reproducción de los discos
[6] Utilice [3, 4] para seleccionar el canal de guía que quiere
ajustar y pulse [1].
Operaciones preliminares
[7] Utilice [3, 4] para seleccionar el canal correspondiente al
de guía y pulse [2].
≥Encienda el televisor y seleccione la entrada de vídeo
correspondiente para conformar las conexiones a esta unidad.
≥Pulse [DVD].
≥Para borrar un número, pulse [CANCEL/RESET, ¢].
≥Repita los pasos 5 y 6 para introducir otros canales.
[8] Pulse [ENTER].
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
[1] Pulse [Í, DVD/VHS POWER] para encender la unidad.
Selección del tipo de televisor
[2] Inserte un disco. (l arriba)
No debe cambiar el ajuste cuando está conectado a un televisor que tiene el
aspecto estándar de 4:3 y no es compatible con la salida progresiva.
[3] Pulse [1, PLAY].
≥La bandeja se cierra y comienza la reproducción.
(La unidad emplea un tiempo para la adquisición de los datos
del disco antes de comenzar la reproducción.)
≥La reproducción inicia desde el último título grabado.
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
[1] Durante la parada
Pulse [FUNCTIONS].
[2] Seleccione “Otras funciones” con
[3
,
4]
y pulse [ENTER].
[3] Seleccione “SETUP” con [3, 4] y pulse [ENTER].
[4] Seleccione “Pantalla TV” con [3, 4] y pulse [2, 1].
[5] Seleccione “Tipo TV” con [3, 4], luego pulse [ENTER].
≥Aspecto 4:3/Aspecto 16:9:
≥La reproducción inicia a partir del comienzo del disco.
[DVD-A] [DVD-V] [VCD] [CD]
Televisor de aspecto
estándar 4:3
Televisor de pantalla
panorámica 16:9
Para detener la reproducción
4:3
16:9
Pulse [∫, STOP]. (l 79, “Función de reanudación”)
≥Cuando detiene la reproducción puede aparecer
el salva pantalla a la derecha. Pulsando otra vez
[∫, STOP] es posible utilizar el sintonizador de la
unidad para ver la televisión.
Salva pantalla
≥480p/480i:
Seleccione “480p” si el televisor es compatible con la salida progresiva.
[6] Utilice [ ] para seleccionar el detalle, luego pulse [ENTER].
3
,
4
Para volver a la pantalla anterior
Pulse [RETURN].
[DVD-A] [DVD-V] [VCD] [CD]
Para salir de la pantalla
Para interrumpir provisionalmente la reproducción
Pulse [RETURN].
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la reproducción.)
78
VQT0N92
DVD
Reproducción
DVD
∫Cuando en el televisor aparece la pantalla de un menú
[VCD]
Pulse las teclas numéricas para seleccionar un detalle.
∫Reproducción directa
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
Puede reproducir desde el título, capítulo o pista que selecciona.
Durante la reproducción
por ej.:
[DVD-A] [DVD-V]
“5”: [0] )[5]
“15”: [1] )[5]
Pulse las teclas numéricas para seleccionar el detalle.
[CD] (Sólo disco MP3, JPEG y TIFF)
Pulse [3, 4, 2, 1] para seleccionar un detalle, luego pulse
[ENTER].
por ej.: “5”: [0] )[5]
“15”: [1] )[5]
[DVD-A]
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
≥Algunas veces para seleccionar un detalle puede usar las teclas
numéricas.
Mientras que está visualizado el salva pantalla (l 78) puede ser
Otros botones usados para hacer funcionar los menús
Lea las instrucciones del disco para más información acerca del
funcionamiento.
especificado un número de grupo.
por ej.: “5”: [5]
≥Éste sólo funciona cuando está parada (está visualizado el salva
pantalla) con algunos discos.
≥Reproducir grupos adicionales
Unos discos contienen grupos adicionales. Si aparece una pantalla
de contraseña después de seleccionar un grupo, introduzca la
contraseña con las teclas numéricas, luego pulse [ENTER]. Por lo
que respecta a la contraseña, se refiera también a la envoltura del
disco, etc.
Nota
≥Si aparece “ ” en el televisor, la unidad o el disco prohiben la
operación.
∫Vista rápida (Reproducción t1.3)
[RAM]
Puede ser aumentada la velocidad de
reproducción sin distorsionar el audio.
Durante la reproducción
DVD-RAM
Reproducir
DVD-RAM
Repr. x1.3
∫Borrado de un título que se está reproduciendo
[RAM] [-R] [-RW‹V›] [+R]
Pulse y mantenga [1, PLAY].
Una vez borrado el título no puede ser restablecido. Asegúrese
antes de proceder.
[1] Durante la reproducción
Para volver a la velocidad normal
Pulse [1, PLAY].
∫Continuación de la reproducción (Función de
reanudación)
Pulse [DVD ERASE].
[2] Pulse [2] para seleccionar “Borrar” y pulse [ENTER].
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
∫Salto CM
[1] Durante la reproducción
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
Puede saltar por cerca de 1 minuto por cada vez que se pulsa.
Durante la reproducción
Pulse [∫, STOP].
≥La reproducción se detiene y en el
visualizador de la unidad destella “PB”.
(Excepto cuando se reproduce desde el
Direct Navigator y cuando se reproduce
Pulse [CM SKIP].
∫Visualización de la imagen TV como imagen en
imagen/Selección de la cantidad de tiempo a saltar —
Time Slip
una lista de reproducción.) La unidad memoriza la posición.
[2] Pulse [1, PLAY].
[RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]
≥La reproducción vuelve a comenzar de donde se interrumpió.
Pulse [TIME SLIP] durante la reproducción y abajo a la derecha de
la pantalla principal se va a visualizar la pantalla (imagen del
televisor) del PIP (de imagen en imagen). Puede ver al mismo
tiempo tanto la reproducción de imágenes como las imágenes del
televisor. En la pantalla principal, puede también acceder
inmediatamente a una escena que quiere ver especificando un
cierto tiempo que quiere saltar.
Para cancelar la función de reanudación
Pulse varias veces [∫, STOP], “PB” desaparece en el visualizador
de la unidad.
(Esta función se cancela también cuando apaga la unidad o cuando
está abierta la bandeja.)
∫Avance rápido y rebobinado — SEARCH
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción
[1] Durante la reproducción
Reproducir
(1)
0 min
Pulse [TIME SLIP].
≥Aparece la pantalla PIP (imágenes del
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].
televisor).
≥Puede cambiar el canal que está
≥Hay 5 velocidades de búsqueda. Cada vez que se
pulsa la tecla la velocidad de búsqueda aumenta.
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
Canal8
DVD-RAM
(2)
•
•
•
•
t2
Estéreo
recibiendo pulsando [CH, W, X].
≥Escuchará el audio de la reproducción
de la pantalla principal.
(1) Imágenes reproducidas
(2) Imágenes actuales en
∫Salto
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] [DVD-V] [-RW‹VR›] [VCD] [CD]
Durante la reproducción o la pausa
Pulse [:, SKIP] o [9, SKIP].
≥Cada presión hace aumentar el número de saltos.
[2] Mientras observa el indicador del
Reproducir
–5 min
tiempo arriba a la derecha
Pulse [3, 4] para ajustar el tiempo a
saltar, luego pulse [ENTER].
≥La reproducción salta por el tiempo
que ha especificado.
≥El indicador del tiempo se apagará a
los 5 segundos aproximadamente, pero ajustando el tiempo
volverá a encenderse.
≥Pulse [3, 4] para cambiar por unidades de 1 minuto. Pulse y
mantenga pulsado [3, 4] para cambiar por unidades de 10
minutos.
Canal8
∫Reproducción de cámara lenta
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] (Sólo partes de imagen en movimiento)
[DVD-V] [-RW‹VR›] [VCD]
Durante la pausa
Pulse [6, SLOW/SEARCH] o [5, SLOW/SEARCH].
≥Cuando continúa la reproducción de cámara lenta durante cerca
de 5 minutos, ella se detiene automáticamente
(excluir [DVD-A] [DVD-V] [VCD]).
≥Hay 5 velocidades de reproducción. Cada vez que se pulsa la tecla
la velocidad de reproducción aumenta.
Para despejar la pantalla PIP
Pulse [TIME SLIP].
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
≥[VCD] Sólo dirección en avance ([5, SLOW/SEARCH]).
Referencia
≥No puede cambiar el canal que está recibiendo mientras se está
grabando la pantalla PIP.
∫Visión cuadro por cuadro
[RAM] [-R] [-RW‹V›] [+R] [DVD-A] (Sólo partes de imagen en movimiento)
[DVD-V] [-RW‹VR›] [VCD]
l
∫Crear capítulos
[RAM]
ño
Durante la pausa
pa
Pulse [2;] ([2]) o [;1] ([1]).
Durante la reproducción
Pulse [CREATE CHAPTER].
s
E
≥Cada vez que se pulsa aparece el cuadro siguiente o el anterior.
≥Mantenga pulsado para cambiar sucesivamente hacia delante o
hacia atrás.
≥Pulse [1, PLAY] para volver a iniciar la reproducción.
≥[VCD] Sólo dirección en avance ([;1], [1]).
≥
Pulse [:, SKIP] o [9, SKIP] para saltar al comienzo del
capítulo
.
≥No puede activar esta función cuando está ejecutando TIME SLIP
(l 80) o envía (copia).
79
VQT0N92
Grabación
DVD
∫Indicación del tiempo en que se parará la grabación
Durante la grabación
[RAM] [-R] [-RW‹V›] [+R]
Pulse [¥, REC] para seleccionar el tiempo de grabación.
≥En la unidad principal, pulse [¥, REC] en el DVD.
Visualización de la unidad
≥Puede grabar hasta 99 títulos en un disco (49 títulos [+R]).
≥No es posible grabar emisiones digitales que permiten “Grabación
sólo una vez” en discos DVD-R, DVD-RW, iR o DVD-RAM de 8
cm (3q). Utilice un DVD-RAM compatible con CPRM.
≥La grabación tendrá lugar en un espacio abierto en el disco. Los
datos no se sobrescribirán.
Cada vez que pulsa la tecla:
Contador (suprimir) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------- OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
∫
Recepción de las transmisiones televisivas durante la grabación
≥Si no queda espacio en el disco de grabación, será necesario
borrar los títulos innecesarios (l 79) o utilizar un nuevo disco.
Operaciones preliminares
≥Conexión (sin cable audio/vídeo)
Cuando graba en el DVD-R, DVD-RW (formato DVD-Vídeo) o +R
≥Cuando graba programas MTS
- Si no conecte una caja TV de cable
Seleccione “Principal” o “Programa Audio Sec. (SAP)” en
“Seleccionar MTS” en el menú SETUP.
- Si conecte una caja TV de cable
Seleccione “Main” or “SAP” en la caja TV de cable.
≥La relación de aspecto de la imagen grabada será 4:3.
DVD-RW (formato DVD-Vídeo) o +R grabado usando esta
unidad, antes el disco ha de ser finalizado.
- Asegúrese de que el indicador TV esté encendido en la
visualización de la unidad. Por si no lo estuviese, pulse [VCR/TV]
para encenderlo.
≥Conexión (con cable audio/vídeo)
- Pulse [TV/VIDEO] para cambiar el modo de entrada en “TV”.
Pulse [CH,
W
,
X] del televisor para seleccionar los canales TV deseados.
∫ Reproducción durante la grabación
[RAM]
∫Reproducción seguida
Es posible empezar la reproducción desde el comienzo de un título
mientras lo sigue grabando.
Durante la grabación o la grabación temporizada
Pulse [1, PLAY].
Operaciones preliminares
≥Quite la protección. [RAM]
≥Seleccione un tipo de audio que quiere grabar.
≥Pulse [DVD].
≥La reproducción inicia mientras que procede la grabación.
∫Grabación y reproducción simultáneas
Puede reproducir un título grabado anteriormente mientras que está
grabando otro título.
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un disco. (l 78)
[1] Durante la grabación o la grabación temporizada
≥Cuando con esta unidad utiliza un DVD-RAM por la primera
vez, formatéelo para garantizar una esmerada grabación.
Pulse [DIRECT NAVIGATOR].
[2] Utilice [3, 4, 2, 1] para seleccionar el título, luego pulse
[ENTER].
[3] Pulse [CH, W, X] para seleccionar el canal.
Para seleccionar con las teclas numéricas:
Modo Antena (Ondas hertzianas)
≥La reproducción inicia mientras que procede la grabación.
Para salir de la pantalla del Direct Navigator
Pulse [DIRECT NAVIGATOR].
por ej.:
Modo Cable TV (Cable)
por ej.: “5”: [0] )[0] )[5]
“115”: [1] )[1] )[5]
“5”: [0] )[5]
“15”: [1] )[5]
“15”: [0] )[1] )[5]
∫TIME SLIP
Pulse [TIME SLIP] mientras que graba; la reproducción inicia a partir de
30 segundos antes de aquel momento. Puede iniciar a reproducir incluso
antes indicando en el específico indicador un cierto tiempo a saltar.
[4] Pulse [REC MODE] para seleccionar el modo de
grabación (XP, SP, LP o EP).
[1] Durante la grabación o la grabación
Reproducir
0 min
[5] Pulse [¥, REC] para iniciar la grabación.
(1)
temporizada
≥
No es posible cambiar de canal o el modo durante la grabación.
Es posible cambiarlos cuando la grabación se encuentra en
pausa, pero el material se grabará como un título separado.
Pulse [TIME SLIP].
≥Se visualiza la pantalla PIP (imágenes
que se están grabando actualmente).
≥En la pantalla principal, la
Grabar
(2)
Para detener temporalmente la grabación
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
grabación.)
≥El título no puede dividirse en un título separado.
≥Puede pulsar también [¥, REC] para reiniciar a grabar.
reproducción inicia a partir de 30
segundos antes de aquel momento.
≥Escuchará el audio de la
(1) Reproduce las
imágenes
(30 segundos antes)
(2) Grabación actual
reproducción.
[2] Mientras observa el indicador del
tiempo arriba a la derecha
Pulse [3, 4] para ajustar el tiempo a
saltar, luego pulse [ENTER].
≥La reproducción salta por el tiempo
que ha especificado.
Para detener la grabación
Pulse [∫, STOP].
≥Grabado como 1 título hasta donde se detiene la posición.
≥Una vez terminada la grabación, lleva más o menos 30 segundos
para que la unidad complete la información de gestión de la
grabación. [-R] [-RW‹V›] [+R]
Reproducir
–5 min
Grabar
≥El indicador del tiempo se apagará a
los 5 segundos aproximadamente, pero ajustando el tiempo
volverá a encenderse.
≥Pulse [3, 4] para cambiar por unidades de 1 minuto. Pulse y
mantenga pulsado [3, 4] para cambiar por unidades de 10
minutos.
∫Modos de grabación y tiempo aproximado de
grabación
(Unidad: hora)
DVD-RAM
DVD-R
DVD-RW
+R
De un solo Doble lado
Para visualizar completamente las imágenes de reproducción
Pulse [TIME SLIP].
≥Pulse [TIME SLIP] para volver a la pantalla PIP.
lado
(9,4 GB)
(4,7 GB)
(4,7 GB)
XP (Alta calidad)
SP (Normal)
1
2
4
2
4
8
1
2
4
Referencia
≥
Según la escena, la imagen de la pantalla PIP puede resultar distorsionada
o bien parpadear. Sin embargo, esto no afecta la imagen grabada.
LP (Larga duración)
muy larga duración)
8 (6°)
16 (12°)
8 (6°)
Para detener la reproducción y la grabación
[1] Pulse [∫, STOP]. La reproducción se detiene.
(Espere 2 segundos o más.)
≥Según el contenido a ser grabado, los tiempos de grabación
pueden salir más cortos que los señalados.
[2] Pulse [∫, STOP]. La grabación se detiene.
≥
No es posible detener la grabación con [
grabación temporizada. Para detener la grabación temporizada
pulse [ , STOP], luego [ENTER] dentro de 5 segundos.
- Puede también seguir pulsando [ ] en la unidad principal durante
más de 3 segundos para detener la grabación temporizada.
∫, STOP] durante la
° Cuando en el menú SETUP se ha ajustado a “EP (6H)” el “Tiempo
de grab. en el modo EP”.
La calidad del sonido se baja, en comparación con otros modos
de grabación, cuando se usa “EP (8H)”.
∫
∫
80
VQT0N92
Grabación
DVD
∫ Controle, cambie o borre el programa
Aun cuando la unidad está apagada, puede visualizar la lista de la
grabación temporizada pulsando [SCHEDULE].
Grabación temporizada
Puede introducir hasta 16 programas con un adelanto de un mes.
Operaciones preliminares
≥Quite la protección [RAM].
≥Inserte un disco (l 78) y asegúrese de que haya bastante espacio
vacío para grabarle encima.
[1] Pulse [SCHEDULE].
[2] Pulse [3, 4] para seleccionar el programa.
≥Controle que el reloj esté ajustado a la hora correcta.
≥Pulse [DVD].
[3] Pulse [CANCEL/RESET, ¢] para eliminar,
No es posible eliminar programas en fase de grabación.
o pulse [ENTER] para cambiar.
∫ Uso del sistema VCR Plus+
Se visualiza la pantalla de ajuste de la grabación temporizada.
®
El introducir los números PlusCode es una manera sencilla de
[4] Si pulsa [ENTER] en el paso 3,
Utilice [3, 4, 2, 1] para cambiar luego pulse
[ENTER].
grabación temporizada. Puede encontrar estos códigos en las guías
TV de los periódicos y revistas.
≥Cuando conecte una caja TV de cable o un receptor de satélite, el
sistema VCR Plusi no funciona. Programe la grabación
temporizada manualmente (l abajo).
[5] Pulse [RETURN].
Referencia
[1] Pulse [VCR Plus_].
≥Los programas cuya grabación no tuvo éxito no se borran
inmediatamente de la lista (destacados en gris), pero se borran
automáticamente a las 4 de la mañana dos día después.
≥Durante la grabación temporizada puede cambiar el tiempo final
mientras el modo de grabación no es “FR”.
[2] Pulse las teclas numéricas para introducir el
número PlusCode.
≥Pulse [2] para volver a la cifra correcta.
[3] Pulse [ENTER].
≥Cerciórese del programa y, si lo necesita, corrija usando [3,
4, 2, 1]. (l abajo, paso 2)
∫Precauciones al usar la grabación temporizada en
DVD y VHS
La grabación temporizada inicia automáticamente a la hora
establecida.
≥La grabación temporizada puede iniciar mientras la unidad está
tanto apagada como encendida. Cuando la unidad está
apagada, el sonido y el vídeo no salen en el televisor.
[4] Si el programa es correcto
Pulse [ENTER].
≥“ ” se enciende en el visualizador de la unidad.
≥Repita los pasos 1–4 para programar otras grabaciones.
[5] Pulse [RETURN].
La grabación temporizada de programas TV no puede
ejecutarse en DVD y VHS conjuntamente.
Verifique si el tiempo inicial de la grabación temporizada no se
superpone en la pantalla de programación temporizada tanto del
DVD (l arriba) como del VHS (l 83).
∫ Programación manual
≥Cuando se conecte una caja TV de cable o un receptor de satélite,
seleccione el canal en la caja TV de cable o receptor de satélite
antes de que comience la grabación temporizada.
Cuando se superponen los ajustes de la grabación temporizada:
≥Cuando el tiempo inicial de las dos grabaciones temporizadas
es el mismo, la del DVD tiene la prioridad.
[1] Pulse [SCHEDULE].
≥Cerciórese de que esté seleccionado “Nueva grabación
programada”.
≥Cuando están especificados los mismos canales del
sintonizador en las grabaciones temporizadas tanto en el DVD
como en el VHS, sólo puede iniciar una grabación temporizada.
≥Cuando el intervalo entre la primera grabación temporizada y la
segunda en el DVD es de 1 minuto o menos como señalado a
continuación, la segunda grabación temporizada en el DVD
tiene la prioridad sobre la en el VHS aunque su tiempo inicial
sea posterior a la grabación temporizada del VHS.
[2] Pulse [ENTER] para mover y cambiar los
detalles usando [3, 4, 2, 1].
≥Pueden usarse las teclas numéricas para introducir “Canal”,
“Fecha”, “Act.” y “Des.”.
≥Canal (Posición del programa/Nombre de la estación de TV)
≥Fecha
Puede crear usted un programa diario o semanal.
Todos los programas diarios o semanales se cuentan como un
solo programa.
1 minuto
≥Act. (hora de encendido)/Des. (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
≥Modo (Modo de grabación)
DVD
Canal 2
Canal 4
VHS
Canal 10
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
XP,.SP,.LP,.EP,.FR,.XP... (l 80)
≥Nombre tít.
Pulse [2, 1] para seleccionar “Nombre tít.” luego pulse
[ENTER].
Cuando los ajustes de la grabación temporizada de DVD y
VHS se superponen, el del DVD tiene la prioridad.
≥“ ” se enciende en la visualización de la unidad por los dos
lados en el modo de espera. Cuando inicia la grabación, “
por el lado de la grabación (lado DVD) queda encendido en
tanto que el “ ” del otro lado (lado VHS) inicia a destellar.
”
[3] Al terminar las correcciones pulse [ENTER].
≥“ ” se enciende en el visualizador de la unidad.
≥Para continuar programando:
Seleccione “Nueva grabación programada” y repita los pasos
2–3.
[4] Pulse [RETURN].
∫Para detener la grabación mientras un programa está
trabajando
Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.
≥Puede también mantener pulsado [∫] en el DVD de la unidad
principal durante 3 o más segundos para detener la grabación.
l
ño
pa
s
E
81
VQT0N92
VHS
Reproducción
VHS
∫Introducción de un cassette
∫Cassette de vídeo
de vídeo
≥Haga disparar la lengüeta del
cassette de vídeo para evitar un
borrado accidental. Cubra el
orificio con una doble capa de
cinta adhesiva para cuando
quiere usar el cassette de vídeo
para una nueva grabación.
La superficie en la que puede ver
el rollo de la cinta tiene que mirar
hacia arriba,
Inserte un cassette de vídeo.
≥Esta unidad se enciende
automáticamente.
Lengüeta
≥Puede usar los cassettes de vídeo con las marcas VHS y S-VHS,
pero esta unidad no permite disfrutar plenamente las
características de los cassette de vídeo S-VHS.
∫Para expulsar el cassette de vídeo
≥Puede expulsar el cassette de vídeo cuando la unidad está en el
modo de espera. Ésta vuelve en espera una vez que haya
expulsado el cassette de vídeo.
Por lo que respecta a la unidad principal
≥Pulse [<, EJECT] en la unidad principal.
Por lo que respecta al mando a distancia
≥Pulse [VHS] luego mantenga pulsado [∫, STOP] durante 3
segundos o más.
∫Avance rápido/Rebobinado
Durante la parada
Pulse [6] (atrás)/[5] (en avance).
DVD/VHS POWER
TV
POWER
Í
VOLUME
CH
INPUT SELECT TV/VIDEO
∫Localización progresiva/Rebobinado
Durante la reproducción
Dé un ligero golpe en o mantenga pulsado [6] (atrás)/[5]
(en avance).
≥Si mantiene pulsadas estas teclas, la normal reproducción vuelve a
iniciar soltándolas.
OPERATION
SELECT
DVD
TRACKING/V-LOCK
VHS
VHS
CH, W, X
Teclas
AUDIO
numéricas
≥
Dé un golpecito en [1, PLAY] para volver a iniciar la normal reproducción.
CANCEL/RESET
VCR Plus+
CM SKIP
∫Búsqueda Jet
Durante la reproducción
SLOW/
SKIP/INDEX
REW SEARCH FF
6, 5
PLAY
Dé un ligero golpe en [6] (atrás)/[5] (en avance) dos veces.
Puede aumentar la localización progresiva/velocidad de
búsqueda en rebobinado.
≥Pulse [1, PLAY] para volver a iniciar la normal reproducción.
≥Puede seleccionar la velocidad de búsqueda para ver la imagen
grabada.
≥La imagen grabada en el modo EP o VP puede resultar
distorsionada si se reproduce a una velocidad aproximada de 35
veces. Puede ocurrir un desplazamiento vertical. Esto no es un
funcionamiento defectuoso pero si tiene lugar, cambie a una
velocidad aproximada de 27 veces.
≥La imagen podría ser incolora o podría resultar distorsionada
según el televisor.
1
;
∫
DIRECT NAVIGATOR
TOP MENU
FUNCTIONS
VHS MENU
3, 4, 2, 1
ENTER
SUB MENU
RETURN
TIME SLIP
S
RETURN
SCHEDULE
DISPLAY
STATUS
JET REW
SCHEDULE
6JET REW
STATUS
REC MODE
REC
REC MODE DVD ERASE ADD/DLT
CREATE
¥
DUBBING
VCR/TV
CHAPTER
∫Lento
Durante la reproducción
Reproducción de un cassette de vídeo
Pulse y mantenga [;, PAUSE] durante 2 segundos o más.
≥Pulse [1, PLAY] para volver a iniciar la normal reproducción.
Operaciones preliminares
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
∫Rebobinado Jet
Para ejecutar un rebobinado a una velocidad más rápida
Pulse [6JET REW].
La indicación “J. REW” aparece en la pantalla del televisor (salvo
cuando aparece la indicación del tiempo que queda en la cinta).
≥Según la cinta o la condición de funcionamiento, la velocidad de
rebobinado puede variar un poco.
≥Pulse [VHS].
[1] Pulse [Í, DVD/VHS POWER] para encender la
unidad.
[2] Inserte un cassette de vídeo grabado. (l arriba)
[3] Pulse [1, PLAY].
≥El contador de la cinta se repone a “0:00.00” cuando la cinta se
rebobina desde el comienzo.
≥Según la cinta, esta función podría no obrar.
≥La reproducción inicia automáticamente si inserta un cassette
de vídeo al que se ha quitado su lengüeta.
∫Cuasi reproducción S-VHS (SQPB)
Para interrumpir provisionalmente la reproducción
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la
reproducción.)
Es también posible reproducir cintas grabadas en el sistema S-VHS.
≥Pueden tener lugar algunos ruidos según el tipo de cinta utilizada.
≥No es posible conseguir plenamente una resolución más alta que
la que es capaz el S-VHS.
Para detener la reproducción
Pulse [∫, STOP].
≥No es posible grabar en el sistema S-VHS con esta unidad.
∫Reproducción repetida
Nota
≥Cuando está apagada la unidad, un cassette de vídeo insertado
puede ser reproducido pulsando [1, PLAY].
≥Cuando la cinta llega al fin, esta unidad la rebobina
automáticamente hasta el comienzo. Esta función no obra durante
≥La búsqueda Jet, la localización progresiva, el rebobinado o la
reproducción lenta se quitan automáticamente a los 10 minutos, y
la reproducción de imagen fija a los 5 minutos.
≥Cuando ve una imagen fija o una reproducción lenta, la imagen
que aparece en el modo VP puede resultar distorsionada.
≥Cuando reproduce una cinta que fue grabada en otro VCR, puede
ser necesario ajustar la pista. En algunos casos, la calidad de la
imagen podría resultar todavía inferior. Esto se debe al formato
limitado.
Durante la reproducción o mientras que está detenida
Mantenga pulsado [1, PLAY] durante 5 o más
segundos.
≥En el visualizador aparece la indicación “RP”.
≥Al fin del programa, la cinta se rebobina hasta el
comienzo del programa y lo va a reproducir otra vez
(esto sólo funciona si quedan al menos 5 segundos
de espacio en blanco al fin del programa). Esto se repite hasta que
lo cancela.
Para reiniciar la reproducción normal
Pulse [1, PLAY].
Para detener la reproducción
Pulse [∫, STOP].
82
VQT0N92
Grabación
VHS
Operaciones preliminares
Grabación temporizada
Puede introducir hasta 16 programas con un adelanto de un mes.
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
≥Controle que el reloj esté ajustado a la hora correcta. Por si no lo
estuviese, ajústelo.
Operaciones preliminares
≥Seleccione el canal que ve la imgen de la unidad (por ejemplo la
entrada AV) en el televisor.
≥Controle que el reloj esté ajustado a la hora correcta. Por si no lo
estuviese, ajústelo.
≥Pulse [VHS].
≥Inserte un cassette de vídeo que tenga la lengüeta de protección
contra el borrado accidental intacta. (l 82)
≥Pulse [VHS].
[1] Inserte un cassette de vídeo que tenga la
lengüeta de protección contra el borrado
accidental intacta. (l 82)
[2] Pulse [CH, W, X] para seleccionar un canal TV.
Para seleccionar los canales con las teclas numéricas:
Modo Antena (Ondas hertzianas)
∫ Uso del sistema VCR Plus+
Se refiera a “Uso del sistema VCR Plus+”, paso 1–5. (l 81)
∫ Programación manual
≥Cuando se conecte una caja TV de cable o un receptor de satélite,
seleccione el canal en la caja TV de cable o receptor de satélite
antes de que comience la grabación temporizada.
por ej.,
Modo Cable TV (Cable)
por ej., “5”: [0] )[0] )[5]
“115”: [1] )[1] )[5]
“5”: [0] )[5]
“15”: [1] )[5]
“15”: [0] )[1] )[5]
[1] Pulse [SCHEDULE].
[3] Pulse [REC MODE] para seleccionar el modo de grabación.
Cada vez que pulsa la tecla: SP>EP>VP>SP
[4] Pulse [¥, REC] para iniciar la grabación.
≥Cerciórese de que esté seleccionado “NUEVA GRABACIÓN
PROGRAMADA”.
[2] Pulse [ENTER] para mover y cambiar los
Para detener temporalmente la grabación
detalles usando [3, 4, 2, 1].
Pulse [;, PAUSE]. (Pulse nuevamente la tecla para reanudar la grabación.)
≥CA (Posición del programa/Nombre de la estación de TV)
≥FECHA
Para detener la grabación
Pulse [∫, STOP].
Puede crear Ud. un programa diario o semanal.
≥ACT (hora de encendido)/DES (hora final)
Si mantiene pulsado el botón, el tiempo aumentará o
disminuirá en incrementos de 30 minutos.
≥Modo de grabación
Para cambiar el modo de grabación, puede pulsar también
[REC MODE].
Modos de grabación
SP: Puede grabar la longitud señalada en la cinta.
EP: Tres veces la longitud del modo SP.
VP: Cinco veces la longitud del modo SP.
≥Para conseguir una capacidad de grabación más larga,
seleccione “EP” o “VP”.
≥Si la calidad de la imagen es importante para Ud. o bien si quiere
almacenar la cinta durante un largo período, seleccione “SP”.
≥Esta unidad puede reproducir cintas grabadas con el modo LP en
otro equipo (se enciende “LP” en el visualizador).
Modo VP:
SP,.EP,.VP,.A°,.SP... (l izquierda)
° Modo SP/EP automático (l abajo)
[3] Al terminar las correcciones pulse [ENTER].
≥“ ” se enciende en el visualizador de la unidad.
≥Para continuar programando:
Seleccione “NUEVA GRABACIÓN PROGRAMADA” y repita
los pasos 2–3.
[4] Pulse [RETURN].
≥“VP” destella en el visualizador de la unidad durante 8 segundos
después de iniciar la grabación.
≥Una cinta grabada en el modo VP por esta unidad no puede
ser reproducida por otro modo VCR. Se recomienda que se la
distingue de otra cinta indicando “VP” en su etiqueta, etc.
≥Lleva más tiempo para que funcione la pista automática cuando
se reproducen cintas en el modo VP y, en algunas cintas, podría
no funcionar de ninguna manera. Si fuese el caso, haga la
localización manualmente.
Nota
≥“ ” y “1” destellan cuando la unidad no puede ejecutar la
grabación temporizada (por ejemplo, el cassette de vídeo no tiene
la lengüeta de protección contra el borrado accidental o bien no
hay ningún cassette de vídeo en su respectivo compartimiento).
El tiempo real grabado podría alargarse más allá del programa mismo
cuando los programas TV se graban usando el sistema VCR Plus
≥Si ajusta “HL” (Tiempo de ahorro de la luz del día) a “Act” cuando
ajusta manualmente el reloj, la grabación temporizada podría no
funcionar cuando del verano cambia al invierno y viceversa.
Nota
≥
≥Aunque el cassette que usa tenga la etiqueta “S-VHS”, no es
posible grabar en el sistema S-VHS con esta unidad. Ésta se
graba en el normal sistema VHS.
≥No puede reproducir grabaciones VP en otro equipo.
≥No puede cambiar canales mientras graba. Puede cambiar
canales mientras está en el modo de pausa.
≥Cuando la grabación está en pausa durante más de 5 minutos, la
unidad vuelve al modo de parada.
_
.
∫
Para detener la grabación mientras un programa está trabajando
Pulse [∫, STOP], luego [ENTER] dentro de 5 segundos.
≥Puede también mantener pulsado [∫] en el VHS de la unidad
principal durante 3 o más segundos para detener la grabación.
∫
Para visualizar el tiempo aproximado que queda en la cinta
∫Modo SP/EP automático
[1] Seleccione “SELECCIONAR CINTA” desde el menú VHS MENU
y elija la longitud correspondiente de la cinta.
[2] Pulse varias veces [STATUS].
Si al comienzo de la grabación temporizada, no queda cinta
bastante para terminarla, la función SP/EP hará marchar
automáticamente la cinta a la velocidad EP para la grabación. Esto
garantiza que será grabado el entero programa. Si el modo EP no es
bastante para alargar la cinta para que se adapte al entero
programa, no será posible grabar el entero programa TV.
El visualizador cambia tan pronto como se pulsa cada vez [STATUS].
Reloj ) Contador ) Tiempo que queda en la cinta
^-------------------------------------------------------------}
≥El tiempo que queda en la cinta podría no visualizarse
correctamente según la cinta usada.
Programación
temporizada
Primer programa
(30 min.)
Segundo programa (60 min.)
∫Indicación del tiempo en que se parará la grabación
Durante la grabación
Pulse [¥, REC] para seleccionar el tiempo de grabación.
≥En la unidad principal, pulse [¥, REC] por el lado del VHS.
Visualización de la unidad
(por ej.: cinta de 60 minutos)
45 min.
en EP
15 min.
en SP
30 min. en SP
≥No es posible activar automáticamente el modo VP.
≥La longitud de la cinta ha de ser ajustada correctamente.
≥Algunas cintas podrían no funcionar correctamente.
≥Si cambia el modo de grabación de SP a EP durante la grabación
temporizada, en aquel punto podría tener lugar una breve
distorsión de la imagen.
Cada vez que pulsa la tecla:
Contador (suprimir) # OFF 0:30 # OFF 1:00 # OFF 1:30
^------ OFF 4:00 ! OFF 3:00 ! OFF 2:00 !----------}
l
ño
Referencia
pa
s
E
≥Esto no funciona durante las grabaciones temporizadas.
≥Pulsando [∫, STOP] la grabación se detiene y el horario
configurado se borra.
∫ Controle, cambie o borre el programa
Se refiera a “Controle, cambie o borre el programa”, paso 1–5. (l 81)
∫Recepción de las transmisiones televisivas durante la
grabación (l 80)
∫
Precauciones al usar la grabación temporizada en DVD y VHS (l 81)
83
VQT0N92
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
“DTS” and “DTS 2.0iDigital Out” are trademarks of Digital
Theater Systems, Inc.
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and
4,819,098, licensed for limited viewing uses only.
MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way Secaucus,
New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3
VQT0N92
C 2005 Matsushita Electric Industrial Co., Ltd.
F0205Fa0
|
Indesit Cooktop HHC7 7AB User Manual
JBL LSR6300 User Manual
Kalorik Team International Group Cooktop 31025 User Manual
KitchenAid KGCC506R User Manual 1
Konftel Conference Phone 300W User Manual
Marquis 9002MWD User Manual
Microsoft Computer Hardware P2289A User Manual
NEC MultiSync LCD1810 User Manual
Philips 107X User Manual
Philips SDW1400GN User Manual