Panasonic CT 13R28W User Manual

PANASONIC CONSUMER ELECTRONICS COMPANY,  
DIVISION OF  
MATSUSHITA ELECTRIC CORPORATION OF AMERICA  
One Panasonic Way  
PANASONIC SALES COMPANY,  
DIVISION OF  
MATSUSHITA ELECTRIC OF PUERTO RICO,  
INC., Ave. 65 de Infanteria, Km. 9.5  
San Gabriel Industrial Park  
Carolina, Puerto Rico 00985  
ENGLISH  
Secaucus, New Jersey 07094  
OWNER'S  
MANUAL  
Panasonic Color Television  
Limited Warranty  
Limited Warranty Coverage  
COLOR TELEVISION  
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics  
Company or Panasonic Sales Company (collectively referred to as “the warrantor”) will, for the length of the period indicated  
on the chart below, which starts with the date of original purchase ("warranty period"), at its option either (a) repair your  
product with new or refurbished parts, or (b) replace it with a new or a refurbished product.The decision to repair or replace  
will be made by the warrantor.  
CT-13R18B  
CT-13R28W  
CT-13R38S  
TV CATEGORIES ALL PARTS EXCEPT CRT  
9”-21” diagonal 1 (ONE) YEAR  
LABOR  
90 DAYS  
CRT  
2 (TWO) YEARS  
SERVICE  
CARRY-IN  
CAUTION  
During the "Labor" warranty period there will be no charge for labor. During the "Parts" warranty period, there will be no  
charge for parts.You must carry-in your product or arrange for in-home service (in-home service available only for 22”  
[diagonal] and larger screen), as applicable, during the warranty period. If non-rechargeable batteries are included, they are  
not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico.This  
warranty is extended only to the original purchaser of a new product which was not sold "as is". A purchase receipt or other  
proof of the original purchase date is required for warranty service.  
Changes or modifications not expressly approved by the party responsible for compliance with the FCC  
Rules could void the user's authority to operate this equipment.  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote manu-  
facturer for the required programming code.  
Carry-in or In-Home Service  
For Carry-In or In-Home Service (as applicable) in the United States call 1-800-211-PANA(7262) or visit Panasonic Web Site:  
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.  
TV/CATV MODE SELECTION  
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television)  
mode. If not using CATV, set this menu option to "TV " mode.  
In-Home service, if applicable, requires clear, complete and easy access to the product by the authorized servicer and does  
not include removal or re-installation of an installed product. It is possible that certain in-home repairs will not be completed  
in-home, but will require that the product, or parts of the product, be removed for shop diagnosis and/or repair and then returned.  
Limited Warranty Limits And Exclusions  
For Product Information, Operating Assistance, Literature Request, Dealer Locations, and  
all Customer Service inquiries please contact:  
1-800-211-PANA (7262), Monday-Friday 9am - 9pm; Saturday-Sunday 10am - 7pm, EST.  
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and  
tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed  
images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3  
pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The warranty ALSO DOES NOT COVER  
damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures  
which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up  
adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification,  
or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone  
other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.  
You can purchase parts, accessories or  
locate your nearest servicenter by visiting  
our Web Site.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE  
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROMTHE USE OF  
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for  
lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The  
items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDINGTHE  
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OFTHE LIMITED WARRANTY.  
Accessory Purchases:  
1-800-332-5368 (Customer Orders Only)  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an  
implied warranty lasts, so the exclusions may not apply to you.  
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032  
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)  
(Visa, MasterCard, Discover Card, American Express, Check)  
This warranty gives you specific legal rights and you may also have others rights which vary from state to state. If a problem  
with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not  
handled to your satisfaction, then write to the warrantor's Consumer Affairs Department at the addresses listed for the warrantor.  
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT  
COVERED BY THIS LIMITED WARRANTY AREYOUR RESPONSIBILITY.  
Service in Puerto Rico  
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/Factory Servicenter:  
Ave. 65 de Infanteria, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Phone (787) 750-4300  
Fax (787) 768-2910  
J3M11001B U  
03/07  
Printed in Thailand  
ANTENNA/CATV CONNECTIONS  
ANTENNA CONNECTIONS  
Connect the antenna to the antenna jack.  
from Antenna  
Single 75 ohm cable  
300 ohm twin-lead wire  
ANT.  
300-75 OHM MATCHING  
TRANSFORMER  
(not supplied)  
Back of TV  
300 ohm twin-lead wire  
Single 75 ohm cable  
COMBINER  
(not supplied)  
This television has an extended tuning range and can tune  
most cable channels without using a cable company  
supplied converter box. Some cable companies offer  
"premium pay channels" in which the signal is scrambled.  
Descrambling these signals for normal viewing requires the  
use of a descrambler device which is generally provided by  
the cable company.  
CATV CONNECTIONS  
Incoming CATV  
Converter/Descrambler  
Converter/Descrambler  
ANT.  
For Subscribers to Unscrambled Basic Cable  
with Scrambled Premium Channels  
Back of TV  
If you subscribe to a cable service in which basic cable  
channels are unscrambled and premium channels require  
the use of a converter/descrambler box, you may wish to  
use a two-set signal splitter (sometimes called a "two-set  
coupler") and an A/B switch box from the cable installer or  
an electronics supply store. Follow the connections shown  
left. With the switch in the "B" position, you can directly tune  
any nonscrambled channels on your TV. With the switch in  
the "A" position, tune your TV to the output of the converter/  
descrambler box (usually channel 3 or 4) and use the box  
to tune scrambled channels.  
A
B
Switch  
Splitter  
For Subscribers to Basic Cable TV Service  
For basic cable service not requiring a converter/  
descrambler box, connect the CATV 75 ohm coaxial  
cable directly to the antenna jack on the back of the  
television.  
For Subscribers to Scrambled Cable TV Service  
If you subscribe to a cable service which requires the use of a  
converter/descrambler box, connect the incoming cable to the  
converter/descrambler box and connect the output of the box to  
the antenna jack on the back of the television. Follow the  
connections shown left. Set the television to the output of the  
converter/descrambler box (usually channel 3 or 4) and use the  
converter/descrambler box to select channels.  
TQB2AA0490-1  
LOCATION OF CONTROLS  
CLOSED CAPTION  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs.  
Closed Captioning will display text on the screen for hearing impaired viewers or it will  
translate and display text in another language.  
TO VIEW CLOSED CAPTIONS  
EPJ  
POWER  
VOLUME  
ACTION  
CHANNEL  
VIDEO IN AUDIO IN  
Press ACTION and press to select the SET UP mode,  
1
then press ACTION.  
Press to select CC mode and then press , then press or ▼  
to select desired Closed Caption (e.g. CAPTION CH1), then press  
2
1
2
3
4
5
6
ACTION.  
Press ACTION twice.  
3
Captions: This Closed Caption Mode will display text on the screen in English or another  
language (depending on the setting of the Closed Captions ). Generally, Closed Captions in  
English are transmitted on Captions Channel 1 and Closed Captions in other languages are  
transmitted on Captions Channel 2.  
1. EPJ (Earphone) Jack - Plug an earphone or monaural headphones with an 1/8 miniplug into  
this jack for private listening.  
2. Remote Sensor - Signals from the Remote Control unit are received here.  
3. POWER - Press to turn the TV on or off.  
4. VOLUME  
/
- Press to raise or lower the level of the sound. And also, press to select the  
Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming  
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until  
it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial  
or a break in the signal, the Captions will reappear when the signal is received again. If the  
channels are changed, the Captions will be delayed approximately 10 seconds.  
For television programs broadcasting with Closed Captions, look in your TV guide for the  
Closed Captions symbol (CC).  
desired setting during On-Screen operations.  
ACTION - Press to display the On-screen menu function. And also, press to enter or select  
information for On-Screen operations.  
5. CHANNEL / - Press to select a higher or lower numbered channel set into memory. And  
also, press to select the desired setting during On-Screen operations.  
6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be  
connected here.  
• When activating the Closed Captioned Decoder, there will be a short delay before the  
Closed Captioned text appears on the screen.  
• Closed Captioned text is only displayed in locations where it is available.  
• If no caption signal is received, no captions will appear, but the television will remain in  
the Caption Mode.  
NOTE:  
If needed customer can enter the OSD by pressing VOLUME and of the front panel at the  
same time.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning.  
This is normal with Closed Captioning, especially with live programs. This is because  
during live programs, captions are also entered live. These transmissions do not allow  
time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may  
not be seen or may interfere with Closed Captions.  
SETTING LANGUAGE  
This TV can display the channel number, on screen displays and picture adjustments on the  
screen in English, Spanish or French.  
• Some cable systems and copy protection systems may interfere with the Closed  
Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder  
may not appear or may appear with strange characters or misspelled words. In this case,  
adjust the antenna for better reception or use an outdoor antenna.  
Press ACTION.  
1
Press to select the SET UP mode, then press ACTION.  
2
NOTE:  
SETTING LOCK  
All four arrows can be used to select the SET UP mode, not just  
.
This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls  
and restrictions. This function allows adult screening of TV programs based upon ratings.  
Press  
and then press or to select desired language  
3
4
LANGUAGE/IDIOMA/LANGUE  
(e.g. English), then press ACTION.  
ENGLISH  
ESPAÑOL  
FRANCAIS  
Press ACTION.  
1
Press ACTION to select the EXIT mode, then press  
ACTION again.  
Press to select the LOCK mode, then press ACTION.  
2
/
/ACTION  
Enter your password (4 digits) using Direct channel selection (0-9).  
In the event of entering an incorrect password, press or wait a few seconds to delete  
the wrong password.  
3
NOTE:  
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,  
but the Closed Caption text will not be affected by the language selection.  
TV OPERATION  
Enter the same password for confirmation only for the first time.  
4
Press or to select the V-CHIP option, then press  
.
To turn on the TV, press POWER.  
5
1
Press or to select the ON, then press ACTION.  
The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) or  
.
2
Press or to select the TV RATING or MOVIE RATING option, then press  
.
6
7
The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.  
As the sound level increases, so do the number of BARS AND THE NUMBER on the  
screen. The same is true for decreasing the level.  
Press or to select the desired rating for the applicable video or TV channel, then  
press ACTION.  
Set the TV/CATV menu option to the appropriate position. When shipped from the  
factory, this menu option is in the CATV setting. See "To Memorize Channels".  
3
TV RATING  
OFF  
TV–Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
TV - VHF/UHF channels  
CABLE - CABLE TV channels  
TV-Y : all children  
TV-Y7 : 7 years old and above  
TV-G : children’s program  
TV-PG : parental guidance  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
CH (CHANNEL) and ▼  
4
Press and release the CH (CHANNEL) or . The channel automatically stops at the  
next channel set into memory. Press and hold the button down to change channels more  
quickly.  
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to explain the rating.  
Press or to select the desired rating you want. Press to select the setting ON or OFF,  
For proper operation, before selecting channels, they should be set into the TV's  
memory. See "To Memorize Channels".  
then press ACTION.  
MOVIE RATING  
DIRECT CHANNEL SELECTION (0-9) - Press these buttons to select a channel.The  
channel number will appear on the upper right corner of the TV screen. If an invalid  
channel number is selected, the display will revert to the previous channel.  
OFF  
G
PG  
PG-13  
R
NC-17  
X
TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the  
TV position, all channels can be instantly selected by using two buttons (For example, to  
select channel 2, press "0", then "2". If you press only "2", channel selection will be  
delayed for a few seconds). For channels 10 and above, press the 2 digits in order.  
G
PG  
: all ages  
: parental guidance  
R
: Parental guidance for under 17  
years old  
NC-17 : 17 years old and above  
: adult only  
PG-13 : parental guidance  
for under 13 years old  
X
CATV mode direct channel selection  
When the TV/CATV menu option is in the CATV position, channels can be selected as  
follows:  
Press ACTION twice.  
8
NOTES:  
1-9  
Press "0" twice, then 1-9 as needed.  
Example, to select channel 2, press "002".  
Press "0", then remaining 2 digits.  
Example, to select channel 12, press "012".  
Press the 2 digits in order.  
If you forget your password, turn on the TV. Reduce the volume to a minium level. Press and  
hold VOLUME on the front of the TV and press the 0 button on the remote control  
simultaneously. Select the LOCK mode, then enter a new password.  
If you want to change the password, follow steps 1-3 and select the "CHANGE PASSWORD"  
option then enter your new password.  
10-12  
13-99  
100-125  
• The V-Chip function is activated only on programs and tapes that have the rating signal.  
• Once you block a program using the V-Chip function, the blocked program cannot be watched  
based on the content of the show. When the program starts, the "INPUT PASSWORD" will  
appear on the screen. When you want to release the V-Chip temporarily, enter the password.  
If you change the channel or turn off the TV while the V-Chip function was temporarily  
released, the original setting will be resumed. If you return to the channel you were watching  
you must re-enter your password to temporarily release your V-Chip function again.  
• If you are changing channels using a VCR or a cable box, while the TV remains on channel  
3 or 4, the V-Chip operates differently. When you enter your password to temporarily  
release the block on any channel, you have completely disabled the V-Chip function for all  
stations. To reset the V-Chip turn your TV off and back on.  
Example, to select channel 36, press "36".  
Press the 3 digits in order.  
Example, to select channel 120, press "120".  
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off  
after 15 minutes.  
• Some cable boxes are built with a delay feature, in some cases it can take up to 10 seconds  
for a program to appear after the password has been input.  
TO MEMORIZE CHANNELS  
This TV is equipped with a channel memory feature which allows channels to skip up or down to the  
CONNECTION TO OTHER EQUIPMENT  
The exact arrangement you use to interconnect various video and audio components to the TV is  
dependent on the model and features of each component. Check the Owner's Manual provided with  
each component for the location of video and audio inputs and outputs.  
next channel set into memory, skipping over unwanted channels.  
Before selecting channels, they must be programmed into the TV's memory. In addition to normal  
VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an  
antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu  
option is in the CATV setting.  
The connection diagrams below are offered as suggestions. You may need to modify them to  
accommodate your particular assortment of components. The diagrams are intended to show  
component video and audio interconnections only.  
“TO MEMORIZE CHANNELS” cannot be selected if the AV mode is selected.  
Press the TV/VIDEO to select the AV mode to use the TV as a monitor.  
Operate your VCR as usual.  
TV/CATV SELECTION  
NOTE:  
Press ACTION and press to select the SET UP mode, then press  
ACTION.  
1
TV/VIDEO only exists in the remote control.  
2. To connect the TV to a TV Game  
TV/AV SELECTION  
Press to select MODE mode and then press . Then press  
to select the TV or CABLE mode, then press ACTION.  
or  
2
3
The TV can also be used as a display device for  
SET UP  
If you connect the TV to a VCR, camcorder or TV  
many video games. However, due to the wide  
LANGUAGE/IDIOMA/LANGUE  
MODE  
AUTO PROGRAM  
MANUAL PROGRAM  
game, through the audio/video in jacks, use the  
variety of different types of signal generated by  
: TV CABLE  
Press ACTION twice.  
these devices and subsequent hook-up variations  
required, they have not all been included in the  
suggested connection diagrams. You'll need to  
consult each component's Owner's Manual for  
additional information.  
TV/VIDEO to make your selection.  
CC  
: OFF  
/
/
/ACTION  
Press the TV/VIDEO repeatedly to select the  
desired mode.  
"AUX" will display on the screen for 4 seconds.  
NOTE:  
Contact your cable company to determine the type of cable system used in your area.  
To Audio/Video OUT  
AUX  
Front of TV  
CHANNEL VIDEO IN AUDIO IN  
AUTOMATIC CHANNEL MEMORY  
TV GAME  
Press ACTION and press to select the SET UP mode, then press  
ACTION.  
1
(not supplied)  
Press twice to select AUTO PROGRAM mode and then press  
.
2
3
3. To connect the TV to a camcorder  
To playback from the camcorder, connect the  
camcorder to the TV as shown.  
1. To connect the TV to a VCR  
The TV will begin memorizing all the channels available in your area.  
VCR  
Front of TV  
Press ACTION twice.  
CHANNEL  
VIDEO IN AUDIO IN  
Front of TV  
To AV OUT  
CHANNEL  
VIDEO IN AUDIO IN  
jack  
To Audio/  
Video OUT  
VIDEO  
AUDIO  
MANUAL CHANNEL MEMORY  
(not supplied)  
(not supplied)  
Press ACTION and press to select the SET UP mode, then press  
1
ACTION.  
TROUBLESHOOTING GUIDE  
Before requesting service, please refer to the following chart for the symptom and possible solution.  
Press twice to select MANUAL PROGRAM mode and then press  
.
2
Select the desired channels to be added or deleted using Direct  
Channel Selection (10 keys. 0-9), CH or .  
3
SYMPTOMS  
POSSIBLE SOLUTIONS  
• Make sure the power cord is plugged in.  
ADD  
CH 012  
• Try another AC outlet.  
Press or to select ADD or DELETE.  
If an unmemorized channel was selected (step 3), the channel  
TV does not operate  
4
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back in.  
indicator will be yellow. Press or if you wish to ADD the  
• Station or CATV experiencing problems, tune to another station.  
• Check sound adjustments (VOLUME and MUTE).  
• Check for sources of possible interference.  
Poor sound or No sound  
Poor picture or No picture  
unmemorized channel. The channel indicator will change from yellow  
to blue when a channel is added and the channel will be memorized.  
If a memorized channel was selected (step 3), the channel indicator  
will be blue.  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• Check antenna or CATV connections, adjust antenna.  
• Check for sources of possible interference.  
Press or if you wish to DELETE the channel from memory. The  
channel indicator will change from blue to yellow when a channel is  
deleted.  
• Check picture control adjustments.  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• Station is weak, adjust antenna to receive desired station.  
• Check for sources of possible interference.  
Repeat Steps 3 and 4 for each channel to be added or deleted.  
Poor reception on some  
channels  
Press ACTION three times.  
5
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
Poor color or no color  
• Check picture control adjustments.  
SETTING TIMER  
You can set the TV to turn off after a preset amount time.  
• Check antenna or CATV connections, adjust antenna.  
• Check for sources of possible interference.  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• CATV company is scrambling signal.  
• Adjust antenna.  
Press ACTION and press to select the TIMER mode, then press  
ACTION.  
Picture wobbles or drifts  
No CATV reception  
1
• Check all CATV connections.  
• Set TV/CATV menu option to the CATV mode.  
• Station or CATV system problems, try another station.  
Press and then press or to select desired time, then press  
2
ACTION.  
Horizontal or diagonal bars • Check antenna connections, adjust or re-direct antenna.  
on screen  
• Check for sources of possible interference.  
• Make sure TV/CATV menu option is in the appropriate mode.  
• If using antenna, check UHF antenna connections.  
No reception above  
channel 13  
After the timer is programmed, the display will disappear then reappear momentarily every  
ten minutes to remind you the timer function is operating.  
• Batteries are weak, dead or inserted incorrectly.  
• Remote is out of range, move closer to TV (within 15 feet).  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions between the Remote and the TV.  
• Make sure the power cord is plugged in.  
To confirm the timer setting, repeat step 1. The remaining time will be displayed.  
To cancel the timer setting, select the OFF.  
No Remote operation  
TV shuts off  
• No broadcast on station tuned.  
• Timer is set.  
• Power interrupted.  
ADJUSTING PICTURE  
You can adjust the settings for color, sharpness, contrast, brightness and tint.  
TV station experiencing problems or program tuned is not closed captioned.  
Try another channel.  
Cannot see closed  
caption  
Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.  
Press ACTION twice to select the PICTURE mode.  
1
• Select the Closed caption.  
Display is not shown in  
your language  
• Select proper language in the SET UP mode.  
Press or to select desired picture, then press  
.
2
3
Press or to adjust the setting.  
SPECIFICATIONS  
AC Power Input:  
120V, 60Hz  
54 Watts  
IC Solid state  
13" (measured diagonally)  
260 lines  
more vibrant color  
greenish hue  
reduces color  
COLOR  
AC Power Consumption:  
Chassis Construction:  
Picture Tube:  
Horizontal resolution:  
Audio Power Output Rating:  
Speaker:  
reddish hue  
TINT  
increase brightness  
decrease brightness  
BRIGHTNESS  
PICTURE  
SHARPNESS  
1.0 Watts  
increase contrast  
decrease contrast  
1-1/2"x2-1/2” Full Range, 8 ohm  
181 Channel, Quartz PLL Frequency Synthesized  
Infrared, Direct Access, 2 x AA batteries (not supplied)  
makes picture  
clearer  
makes picture softer  
Tuner Type:  
Remote Control:  
Receiving Channels:  
VHF  
UHF  
2-13  
14-69  
TO RETURN TO INITIAL SETTING  
Select the NORMAL then select SET as in step2.  
CATV 1-125  
Antenna Input Impedance:  
Input:  
75 Ohm (VHF/UHF/CATV) Coaxial Input  
Video: 1.0 Vp-p 75 ohm  
Audio: 300 mV, 47k ohm  
14-1/8" (W) x 13-15/16" (D) x 13-1/4" (H)  
20.9 Ibs  
Dimensions:  
Weight:  

HP Hewlett Packard v7650 User Manual
Iiyama Computer Monitor P1905S B2 User Manual
JVC GD 463D10U User Manual
LG Electronics MU 50PZ44VK User Manual
Moffat Blue Seal GE56B User Manual
Panasonic CT 32S21 User Manual
Philips 21PT1381 User Manual
Philips 29PT5683 User Manual
Philips 170V9 User Manual
Philips DVDR7310H User Manual