Contents
Before operating the set, please read this manual carefully.
Contents
Warnings
1
2~3
4
5~7
5
Supplied Accessories
Controls
Controller of panel
Remote controller
Installations
Owner's Manual
6~7
8
Basic Operation
Turning the TV On and off
Programme selection
Volume adjustment
Q.View
9
9
9
9
9
Mute Function
9
On screen Language selection
On Screen Display
Setting up TV programme
Auto programme
Manual programme
Programme edit
Picture Control
9
10
11~13
11
12
13
14
Manual picture control
Auto picture control
Sound Control
14
14
15
Other functions
16~17
16
TV, COMPONENT, VIDEO, S-VIDEO mode
Auto sleep
16
Blue back
16
Sleep timer
17
Sound output selection
Teletext
17
18~19
18
Text On/Off
TOP text
18
FLOF text
18
Special Teletext function
Connecting external equipment
Antenna connection
COMPONENT INPUT
A/V-Inputs
19
20~21
20
20
20
S-VIDEO-Input
21
Headphone jack
Connecting PC as Monitor
Product Specifications
Troubleshooting
21
22~23
24
Model:NLT-15
25
1
Controls
Supplied Accessories
L Make Sure the following accessories are provided with Product.
<<CONTROLLER OF PANEL>>
1. MENU
1. DC Adaptor
2. AC Cord
Displays a menu.
2. y PR x (Programme Up/Down)
Selects a programme or a menu item.
3. POWER STANDBY INDICATOR
Illuminates red when the TV is in standby mode. / Illumintes green when the TV is
switched on.
4. POWER Switches TV set on or off.
5. Remote control sensor Accepts the IR signal of remote controller.
6. ÏVOLq (Volume Up/Down)
Adjusts the volume./ Adjusts menu settings.
7. TV/AV
4. Batteries (AAA type)
3. Remote control
POWER
Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode / Clears the menu from the
screen.
3
5
SSM
PSM
I/II
Q.VIEW
MENU
TV/AV
PRV
OK
MENU
PR
VOL
TV/AV
CVOL
VOLB
PRW
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TIME
REVEAL
1
2
4
6
7
5. Owner’s manual
6. PC IN cable
Owner's Manual
1
2
3
4
5
6
7
8
Model:NLT-15
1 Ant. (Antenna input)
2. DC12V adaptor input
3. PC/DTV INPUT
4. COMPONENT INPUT
5. HEADPHONE out
7. PC Audio IN cable
Connect a headphone to this socket.
6. S-VIDEO Input
Connect the output of an S -VIDEO VCR to the S-VIDEO input.
Connect the audio outputs of an S-VIDEO VCR to the AV-IN audio inputs.
7. A/V-IN Inputs
Connect the Audio/Video outputs of external equipment to these inputs.
8. PC Audio IN
Connect the audio cable from the PC to the PC Audio IN of the set.
4
5
Controls
Controls
All the functions can be controlled with the remote controller handset. Some
functions can also be adjusted with the buttons on the front panel of the set.
10. PRxy (Programme Up/Down)
POWER
Selects next programme or a menu item.
Remote controller
11. OK
Before you use the remote controller, please install the
POWER
Accepts your selection or displays the current mode.
batteries.
1
2
12. VOLÏq (Volume Up/Down)
Adjusts the sound level.
1. POWER
3
5
SSM
PSM
Turns the TV on from standby or off to standby.
13. SLEEP
Sets the sleep timer.
I/II
Q.VIEW
PRV
2. MUTE
MENU
TV/AV
Note : In teletext mode, the SLEEP is used for teletext
4
Turns the sound on or off.
SSM
PSM
function.
11
CVOL
VOLB
OK
10
6
9
3. NUMBER buttons
I/II
Q.VIEW
PRV
7
8
14. TELETEXT buttons
MENU
TV/AV
PRW
Selects programme numbers
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
12
14
13
15
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
CVOL
VOLB
OK
4. PSM (Picture Status Memory)
TIME
REVEAL
PRW
Recalls your preferred picture setting.
15. ARC/* (Aspect Ratio Control)
Selects a screen mode.- 4:3,16:9 or ZOOM.
ż Only the ARC/* button is operated at LCD 17” Wide
(NEC NLT-17W).
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
5. SSM(Sound Status Memory)
Recalls your preferred sound setting.
TIME
REVEAL
6. TV/AV
Selects TV, COMPONENT, VIDEO, S-VIDEO or PC mode.
Clears the menu from the screen.
Battery Installation
uInserting batteries
1. Pull the battery cover upward in the arrow direction to remove.
2. Insert the batteries with correct polarity.
3 .Put the battery cover back.
7. MENU
Displays a main menu.
8. I/II
Selects the language during dual language broadcast.
Selects the sound output.
N
N
9. Q.VIEW
Returns to the previously viewed Programme.
* Apply two 1.5V alkaline batteries of AAA type. Don’t mix the used batteries with new
batteries.
* Remove batteries when you don’t use the remote control for long time. Liquid
leakage from old battery may cause operation failure.
uNotes for using remote control
✓ Make sure there are no objects between the remote control and its sensor.
✓ Don’t place the remote control near a heater or damp place. Strong impact on
remote control may cause operation failure.
✓ Signal from the remote control may be disturbed by sun light or other strong light.
In this case, turn the set to other direction.
6
7
Installation
Basic Operation
Installation Options
Turning the TV On and Off
* You can install the TV on a wall or place it on a table-like surface.
* To eliminate any risk of injury from the TV falling, it should be mounted securely.
POWER
Standby Setup: The AC-DC converter and the AC power cord
must be set up and connected to have the TV in standby
mode ready to be turned on.
1. Wall Installation
Press the power button on the front panel of the TV to go into
standby mode.
Caution: Do not install the TV on a weak wall surface, like plaster etc. It is not needed
any bracket or installation accessory with the exception of 2 nails or screws. Distance
of holes of back panel is 305mm,
1. If the TV is in standby mode, press the Power button on
the remote controller or the TV itself to turn the TV on.
2. Press the Power button again on the remote controller
or the TV itself to turn the TV off.
a. Drive 2 nails or screws on the wall, in the location you want to install the TV.
b. Hang the TV on the nails or screws.
SSM
PSM
Note : If the TV is on and the power button is pressed to turn
I/II
Q.VIEW
PRV
the TV off, the TV goes into standby mode.
MENU
TV/AV
305mm
CVOL
VOLB
OK
Programme selection
PRW
You can select a Programme number with the PRxy button
or NUMBER buttons.
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TIME
REVEAL
Volume adjustment
Press the VOLÏq button to adjust the sound level.
Quick view
Press the Q.VIEW button to view the last channel you were
watching.
2. Desktop Installation
Sound mute function
Press the MUTE button. The sound is switched off and the
mute display
appears.
To cancel mute mode, press the MUTE button again, VOLÏq
or SSM button.
On screen menu language selection Language
English
Deutsch
Français
Italiano
The menu can be displayed on the screen in desired
language.
First select your language.
1. Press the MENU button.
2. Select the Setup menu.
Then press the VOLÏq button.
3. Select the Language menu.
Español
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
4. Press the PRxy button to select your desired
language.
5. Press the TV/AV button.
All the on screen displays will appear in the selected
language.
8
9
On Screen Display
Setting up TV Programme
1. Press the MENU button to display main menu.
2. Press the PR xy button to select menus-Picture, Sound, Special, Setup.
3. Adjust each menu with the VOLÏq button.
4. Press the MENU button to return to preceding menu.
5. Press the TV/AV button to finish adjusting menu.
Up to 100 TV Programmes can be stored in this set by
Auto programme
programme numbers. Once you have preset the
programmes, you will be able to use the PRxy or
NUMBER button to scan the programmes you programmed.
Programmes can be tuned using automatic or manual
modes.
System
BG
1
Storage from
Start
Equalizer
Flat
Music
Movie
Main menu
Picture
Sound
Special
Setup
Picture
Contrast
Brightness
Colour
Speech
User
90
75
70
50
Auto programme
q
q
q
q
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
All Programmes that can be received are stored by this
method. It is recommended that you use auto programme
during installation of this set.
ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb
Sharpness
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
POWER
1. Press the MENU button.
Auto programme
2. Select the Setup menu. Then press the VOLÏq button.
3. Select the Auto programme menu. Then press the
VOLÏq button.
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
System
BG
1
Storage from
Start
4. Press the PRxy button to select System.
5. Select a TV system with the VOLÏq button;
BG : (Germany/Asia/M.East/Africa/Australia)
Sound
Equalizer
Balance
AVL
Ș
0
Off
Off
POWER
I
: (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
: (USA/Korea/Philippines)
Surround
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
SSM
PSM
M
6. Press the PRxy button to select Storage from.
7. Select the beginning programme number with the
VOLÏq button or NUMBER buttons.
8. Select Start, then press the VOLÏq button.
Press Menu button to finish Auto programme.
9. Press the TV/AV button to return to normal TV viewing.
Manual programme
System
Channel
Fine
BG
1
I/II
Q.VIEW
PRV
MENU
TV/AV
V/UHF
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
ȘȘȘ
ȘȘȘ
C 01
1
Search
Name
Storage
CVOL
VOLB
OK
Special
SSM
PSM
Input
TV
Off
Off
PRW
Auto Sleep
Blue back
ƇƉ ȖȘ 73ꢀꢀꢀ<>ꢁ)>
I/II
Q.VIEW
PRV
MENU
TV/AV
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
Programme edit
TIME
REVEAL
0 C 6
1 C 6
2 C 6
3 C 6
4 C 6
■ Skip
5 C 6
6 C 6
CVOL
VOLB
OK
7 C 6
8 C 6
9 C 6
■ Move
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
PRW
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
Setup
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
Auto programme
Manual programme
Programme edit
Language
Ș
Ș
Ș
Ș
TIME
REVEAL
Language
English
Deutsch
Français
Italiano
Español
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
10
11
Setting up TV Programme
Setting up TV Programme
Manual programme
Programme edit
Programme edit
Manual programme
System
Channel
Fine
BG
1
0 C 6
1 C 6
2 C 6
3 C 6
4 C 6
■ Skip
5 C 6
Manual programme lets you manually tune and arrange
the Programme in whatever order you desire. Also you
can assign a Programme name with five characters to
each programme number.
This function enables you to delete or skip the stored
programmes.
V/UHF
6 C 6
7 C 6
8 C 6
9 C 6
■ Move
ȘȘȘ
ȘȘȘ
C 01
1
1. Press the MENU button.
Search
Name
Storage
2. Select the Setup menu. Then press the VOLÏq button.
3. Press the PRxy button select Programme edit Then
press the VOLÏq button.
1. Press the MENU button.
2. Select the Setup menu. Then press the VOLÏq
button.
3. Select Manual programme. Then press the VOLÏq
button.
ƇƉ ȖȘ 73ꢀꢀꢀ<>ꢁ)>
xy
and
4. Select the programme name to edit with the PR
VOLÏq button.
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
4. Press the PRxy button to select System.
5. Select a TV system with the VOLÏq button.
BG : (Germany/Asia/M.East/Africa/Australia)
Skipping a Programme
POWER
POWER
1. Select a number to be skipped with the PRxy or
VOLÏq button.
2. Press the Green button. The skipped programme turns
to blue.
3. Press the Green button again to release the skipped
programme.
4. Press the TV/AV button to return to normal TV viewing.
I
: (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
: (USA/Korea/Philippines)
M
6. Press the PRxy button to select Channel.
7. Press the VOLÏq button to select V/UHF or Cable as
required. If possible, select the programme number
directly with the number buttons.
Moving a programme
8. Press the PRxy button to select Search. Press the
VOLÏq button to commence searching.
If a Programme is found the search will stop.
9. Press the PRxy button to select NAME, Press the
VOLÏq button to allocate the location and use
PRxy button to select the character. (blank, +, -,
Alphabet A to Z, Numeric 0 to 9)
1. Select a programme to be moved with the PRxy or
VOLÏq button.
SSM
PSM
SSM
PSM
2. Press the Yellow button.
I/II
Q.VIEW
PRV
I/II
Q.VIEW
PRV
3. Move the programme to desired programme number
with the PRxy or VOLÏq button.
4. Press the Yellow button again to release this function.
5. Press the TV/AV button to return to normal TV viewing.
MENU
TV/AV
MENU
TV/AV
CVOL
VOLB
OK
CVOL
VOLB
OK
10. If this Programme is the one required, press the
PRxy button to select Storage. Select the desired
programme number with the VOLÏq button or
NUMBER buttons.
11. Press the OK button to store it. The display Stored
will appear.
PRW
PRW
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TIME
REVEAL
TIME
REVEAL
To store another Programme, repeat steps 5 to 11.
12. If the TV picture reception is not good, then do the
fine tuning. Select FINE, then adjust the received
signal with the VOLÏq button.
12
13
Picture Control
Sound Control
You can adjust picture Contrast, Brightness, Colour Sharpness and Tint to the levels
you prefer.
You can select your preferred sound setting; Flat, Music,
Movie or Speech and you can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programmes.
Sound
Equalizer
Balance
AVL
Ș
0
Off
Off
Picture
Contrast
Brightness
Colour
90
75
70
50
Manual Picture Control
Surround
1. Press the MENU button.
1. Press the MENU button.
2. Select the Picture menu. Then press the VOLÏq button.
3. Press the PRxy button to select a picture item.
4. Press the VOLÏq button to adjust the picture condition
as you want.
Sharpness
2. Select the Sound menu. Then press the VOLÏq button.
3. Press the PRxy button to select the desired sound
item; Equalizer, Balance, AVL or Surround.
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
4. Press the VOLÏq button to make desired adjustment.
5. Press the TV/AV button to store for the picture User.
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
POWER
Equalizer
Flat
Music
Movie
Speech
Selected Item
Contrast
Setting Change
POWER
More darkness VOLÏ 0~100 qVOL More light
Less bright VOLÏ 0~100 qVOL More bright
Lower color intensity VOLÏ 0~100 qVOL Higher color intensity
Soft picture VOLÏ 0~100 qVOL Sharp picture
User
ꢂꢃꢄ ꢂꢃꢅ ꢄꢃꢅꢀ ꢅꢃꢂꢀꢀꢄꢂ3Pb
Brightness
Colour
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
SSM
PSM
5. At Equalizer selection, press the PR
xy
button to select
your preferred setting ; Flat, Music, Movie, Speech or
User. To set the Equalizer User.
I/II
Q.VIEW
PRV
Sharpness
MENU
TV/AV
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq button.
c. Make appropriate sound level with the PRxy button.
d. Press the MENU button to return to preceding MENU
and the TV/AV button to return to normal TV viewing.
SSM
PSM
* Tint menu only appears at NTSC signal.
CVOL
VOLB
OK
I/II
Q.VIEW
PRV
PRW
MENU
TV/AV
Auto Picture Control
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
* The sound Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory
and cannot be changed.
PSM (Picture Status Memory)
CVOL
VOLB
OK
1. Press the PSM button.
TIME
REVEAL
2. Press the PSM button repeatedly to select [PSM].
3. Press the OK button.
PRW
6. Select the Balance menu and adjust the balance of
speakers.
7. Select the AVL(Automatic Volume Leveler) menu On or Off.
8. Select the Surround menu On or Off.
Each press of the button changes the screen display
as below.
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TIME
REVEAL
Dynamic
؋ Standard ؋ Mild ؋ Game ؋ User Auto Sound Control
SSM (Sound Status Memory)
• Dynamic : Vivid Picture Appearance
• Standard : Standard Picture Appearance
• Mild : Softer Picture Appearance
• Game : External Video Game Picture Setup
• User : Manual Picture Setup
1. Press the SSM button.
2. Press the SSM button repeatedly to select [SSM].
3. Press the OK button.
Each press of the button changes the screen display as below.
Flat
؋ Music ؋ Movie ؋ Speech ؋ User 14
15
Other functions
Other functions
TV, COMPONENT, VIDEO and S-VIDEO modes
(You can’t set PC mode in this menu. Use the TV/AV button)
Inputs can be set for COMPONENT, VIDEO or S-VIDEO
mode. The COMPONENT, VIDEO or S-VIDEO mode is
used when a video cassette recorder (VCR), or other
equipment is connected to the set.
Note : When a VCR is connected to the aerial socket the
set is used in TV mode. See the Connection of external
equipment section.
Sleep timer
Special
Input
Auto sleep
Blue back
TV
Off
Off
You don’t have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
Press the SLEEP button to select the number of
minutes.
The display will appear on the screen, followed by 0, 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
Note : a. To view the remaining sleep time, press the
SLEEP button once.
120
B
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
1. Press the MENU button.
2. Select the Special menu.
POWER
3. Press the PRxy button to select Input.
4. Press the VOLÏq button to select TV,
COMPONENT, VIDEO, S-VIDEO.
b. To cancel the sleep time, repeatedly press the
SLEEP button until it displays “0”.
POWER
COMPONENT : COMPONENT OUT connected to the
Sound output selection
In VIDEO mode, you can select output sound for the left
and right loud-speakers.
COMPONENT INPUT of the set.
VIDEO : VIDEO OUT connected to the VIDEO input of the
set.
S-VIDEO : S-VIDEO OUT of VCR connected to the S-
VIDEO input of the set.
Repeatedly press the I/II button to select the sound
output.
L+R : Audio signal from audio L input is sent to left loud-
speaker and audio signal from audio R input is
sent to right loud-speaker.
SSM
PSM
SSM
PSM
Alternatively you can select the TV, COMPONENT,VIDEO,
S-VIDEO or PC mode by pressing the TV/AV button.
L+L : Audio signal from audio L input is sent to left and
right loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
I/II
Q.VIEW
PRV
MENU
TV/AV
I/II
Q.VIEW
PRV
MENU
TV/AV
CVOL
VOLB
OK
Auto sleep
CVOL
VOLB
OK
If you select Auto sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Press the MENU button.
PRW
PRW
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
2. Select the Special menu. Then press the VOLÏq
button.
TIME
REVEAL
TIME
REVEAL
3. Press the PRxy button to select Auto sleep.
4. Press the VOLÏq button to select On.
5. Press the TV/AV button to return to normal TV
viewing.
Blue back
No signal channel is expressed as a blue screen.
16
17
Teletext
Teletext
TEXT On/Off
Special Teletext functions
MENU
Press the TEXT/MIX button to switch to teletext. The initial
page or last selected page appears on the screen. Two
page numbers, TV Programme name, date and time are
displayed on the screen headline. The first page number
indicates your selection, while the second shows the
current page displayed.
POWER
Functions
Changes teletext mode
; only teletext mode, text mode superimposed on the
TV picture, TV mode
TEXT/MIX
1. Press TEXT/MIX button once to set the TEXT mode.
2. Press TEXT/MIX button once more displays the
teletext pages superimposed on the TV picture.
3. Press the TEXT/MIX button to switch off teletext.
Text mode is off and TV mode appears.
4. If you press TEXT/MIX button repeatedly displays
are changed as below.
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of
the page.
SIZE
SSM
PSM
Press this button again to return to the normal display.
I/II
Q.VIEW
PRV
Stops the automatic page change which will occur if a
teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When
this button is pressed the stop symbol is displayed at
the top left-hand corner of the screen and the
automatic page change is inhibited. To continue press
this button again.
MENU
TV/AV
TEXT
؋ MIX ؋ TV mode CVOL
VOLB
OK
HOLD
PRW
TOP text
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
The user guide displays four fields-red, green, yellow and
blue at the bottom of the screen. The yellow field denotes
the next group and the blue field indicates the next block.
TIME
REVEAL
Return to index page
INDEX
Group/block/page selection
1. With the BLUE button you can progress from block to
block.
2. Use the YELLOW button to proceed to the next group
with automatic overflow to the next block.
3. With the GREEN button you can proceed to the next
existing page with automatic overflow to the next
group. Alternatively the PRx button can be used.
4. The RED button permits to return to previous selection.
Alternatively the PRy button can be used.
Displays the TV picture on the screen while waiting for
the new teletext page. The display will appear at the
top left hand corner of the screen. When the updated
page is available then display will change to the page
number.
UPDATE
Press this button to view the updated teletext page.
When viewing a TV programme, press this button to
display the time at the top right hand corner of the
screen. Press this button again to remove the display.
In teletext mode press this button to select and hold or
change a four digit sub page number. This is displayed
along the bottom of the screen. Press this button again
to exit this function.
FLOF text
The teletext pages are colour coded along the bottom of
the screen and are selected by pressing the corresponding
coloured button.
TIME
Page selection
1. Press the
button to select the index page.
2. You can select the pages which are colour coded along
the bottom line with the same coloured buttons.
3. The VOLÏq button can be used to select the
preceding or following page.
Press this button to display the concealed information,
such as solutions of riddles or puzzles.
Press this button again to remove the information from
the display.
REVEAL
18
19
External Equipment Connection
External Equipment Connection
When connecting to external equipment, please ensure you turn the main switch OFF
to prevent any damage to the equipment.
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
S-VIDEO INPUT
If using an S-VIDEO source, the picture quality will be
improved over a video source.
1. Connect the S-VIDEO output of a VCR to the
A/V-IN
S-VIDEO
L(MONO)
R
S-VIDEO input on the TV.
2. Connect the audio cables from the S-VIDEO
VCR to the L (MONO) R inputs on the TV.
3. Select S-VIDEO mode by pressing the TV/AV
button repeatedly.
Antenna connection
1. Connect RF out on the VCR to the Antenna input
on the rear of the TV.
2. Connect the antenna cable to the antenna in
ANT. POWER
VCR
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
jack on the VCR.
3. Press the TV/AV button to select Antenna input
source.
4. Press the PLAY button on the VCR.
VCR
Headphone jack
Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound form the speaker on the TV. To adjust the
headphone volume, press the VOLÏq button. If you press the MUTE button, the
sound from the headphone is turned off.
COMPONENT INPUT
1. Connect the Video outputs (Y Cb Cr) on a DVD
POWER
L
R
to the COMPONENT on the TV.
2. Press the TV/AV button to select COMPONENT
mode.
Headphone
3. Press the PLAY button on the DVD.
COMPONENT
(DVD)
A/V INPUT
1. Connect the A/V out jacks on a VCR to A/V-IN jacks on
the TV.
A/V-IN
L(MONO)
R
2. Press the TV/AV button to select VIDEO mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the TV screen.
Note : If you have a mono VCR, connect the audio cable
VCR
from the VCR to the L(MONO) socket of the set.
20
21
Connecting PC as monitor
Connecting PC as monitor
VGA/DTV INPUT
1. Connect the VGA IN cable
(D sub jack) from the
Picture adjustment
Contrast
You can adjust picture Contrast, Brightness, Temperature,
Horizontal/Vertical position, Clock, Phase, Auto and Reset
x
monitor output socket of
the PC to the PC/DTV
input socket of the set.
as you prefer.
0
Ï
90
q
100
1. Press the TV/AV button to select the PC mode.
2. Press the MENU button.
y
AUTO
2. Connect the Audio cable
from the PC to the PC
3. Press the PRxy button to select the desired
picture item.
4. Press the VOLÏq button to make appropriate
adjustments.
1024 X 768
Audio IN of the set.
ƇƉ ȖȘ 5-6=ꢀꢀ<>ꢁ)>
3. Press the TV/AV button to
select PC mode.
4. Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Contrast
Clock
Phase
Auto
POWER
Brightness
Temperature
H-position
V-position
AUTO
Resolution
Reset
Horizontal
Vertical
Mode
Resolution
frequency (KHz) frequency (Hz)
Contrast
640X480
640X480
640X480
640X480
640X480
720X400
31.5 KHz
35 KHz
37.9 KHz
37.5 KHz
43.5 KHz
31.5 KHz
60 Hz
67 Hz
72 Hz
75 Hz
85 Hz
70 Hz
This function is to adjust picture to light/dark.
Brightness
VGA
SSM
PSM
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down
as you prefer.
I/II
Q.VIEW
PRV
MENU
TV/AV
800X600
800X600
800X600
800X600
800X600
35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
53.7 KHz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
CVOL
VOLB
OK
SVGA
XGA
PRW
Clock
This function is to minimize any vertical bars or stripes visible
on the screen background. Horizontal screen and centering
will also change.
TEXT/MIX
UPDA TE
SIZE
SLEEP
INDEX
1024X768
1024X768
1024X768
1024X768
48.4KHz
56.5 KHz
60.2 KHz
68.7 KHz
60Hz
70 Hz
75 Hz
85 Hz
TIME
REVEAL
Note: Refer to the recommended resolution chart on
page 22.
Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto
576p
1080i
50Hz
50Hz
HDTV
This function is for the automatic adjustment of the screen
position, clock and clock phase. The displayed image will disappear for a few
seconds while the Auto-configuration is in process.
Note:
Note: Some signal from some graphics boards may not function properly. If the
results are unsatisfactory, adjust your monitor’s position, clock and clock
phase manually.
a. If the set is cold, there may be a small “flicker” when the set is switched on.
This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
c. When resolutions are displayed that are not native to the panel resolution,
text may appear choppy or lines may appear to be bold or thicker than others.
To minimize, choose a resolution similar to the panel.
Reset
This function allows you to return to the good picture reproduction programmed at
the factory and cannot be changed.
5. Press the TV/AV button to store the adjustment.
22
23
Product Spec.
Troubleshooting
Model
NLT-15
Problem
Check item
Horizontal size 455 mm
Thickness 210 mm
Weight 6.3 kg
• Insert the AC power cord plug securely in AC power
outlet.
Main body
No picture on screen and no sound
from speakers.
Height
405 mm
• Make sure the LCD TV is not in the standby mode
(The POWER/Standby indicator is red.)
Power requirements
Television system
Television programnme
Display Panel
DC 12V/3.0A
• Check the brightness setting of the display.
• Lamp may have malfunction.
No picture/No picture from AV
terminal.
PAL/SECAM-B/G, I, D/K /NTSC-M
VHF: 2~13 UHF :14~69 Cable : 01~125
LG Philips LCD 15.1" TFTLCD panel
45W
• Check the sound setting.
• Make sure the sound is not muted.
• Make sure the connectors of the optional speaker
system are securely inserted.
Picture is displayed, but no sound
from the speakers.
Power consumption
External antenna impedance 751
Picture is too light.
Picture is too dark.
• Make sure COLOR and CONTRAST settings.
• Make sure BRIGHTNESS setting is not set too low.
• Check to see if BRIGHTNESS setting.
• Lamp may have malfunction.
Audio output
Speaker
1.5W + 1.5W
81 X 2
• Change the batteries.
• Make sure the infrared transmitter window is not
receiving strong light such as light from fluorescent
lamps.
Remote control does not work.
• A/V IN
• PC IN
• S-VIDEO IN
External input ports
AC Power Adaptor
• PC Audio IN
• DC 12V IN
• COMPONENT IN
• Antenna IN
• The reception may be weak.
The TV picture is not sharp.
The TV picture moves.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
AC 100-240V, 50/60Hz, Output:12vdc, 3.0A
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from
mountains or buildings.
The TV picture is doubled/tripled
(Ghosting)
• Although the LCD panel uses highly precise technology, it may display blank pixels,
dark spots or lighting pixels on the screen. This is normal and not an indication of a
defect.
• There may be interference from automobiles, trains,
high voltage lines, neon lights, etc.
• There may be interference between the antenna cable
and power cable. Try positioning them further apart.
The TV picture is spotted.
• Technical specifications are subject to change without notice.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations
and transmission antennas of amateur radios and
cellular phones may also cause interference.
There are stripes on the screen or
colors fade.
• Use the unit as far apart as possible from devices
that may cause possible interference.
• Unplug the power cord of the adaptor from the AC
outlet to turn off and reset the unit.
Power button does not respond.
PC image not centered.
• Check the horizontal/vertical position setting.
• Check Clock and phase settings.
Try using ‘Auto’ function setting.
PC image not clear or has stripes.
24
25
NEC Australia Pty. Ltd.
ABN 86 001 217 527
Home Electronics Group
NEC Service Centres
New South Wales
Sydney
184 Milperra Rd, Revesby 2212
(02) 9780 8688
(02) 4926 2466
Newcastle 120 Parry Street, Newcastle West 2302
Victoria
Melbourne Unit1/6, Garden Road, Clayton, 3168
131-632
Queensland
Brisbane
Unit 4/305 Montague Road, West End, 4101
131-632
Southport Shop 1, 48 Ferry Road, Southport 4215
(07) 5591 3670
South Adelaide
Adelaide
84A Richmond Rd, Keswick, 5053
(08) 8375 5710
Western Australia
Perth 45 Sarich Court, Osbome Park 6017
(08) 9445 5901
For Service in outer areas, please contact your NEC retailer for the
address of the nearest Authorised NEC Service Centre
NEC Australia Pty. Ltd.
Home Electronics Group
244 Beecroft Road EPPING 2121
Tel:131-632
Fax:(02) 9877 2353
|