Technical data sheet for
GAS COOKTOPS 600mm
RN8400G-B, RN8400G-CB, RN8400G-LS, RN8403G-B, RN8403G-CB, RN8403G-LS,
RN8406G-B, RN8406G-CB, RN8406G-LS
Heavy-duty construction
28 MJ/hr open burners
Flame failure standard
Pilot burners optional
300mm griddle plate options
Optional simmer plates
3 models of base unit
Stainless steel exterior
Easy clean
Easy service
Fully modular
RN8400G-LS
Leg stand (supplied as –LS model)
Overall Construction
• Fully modular for matched suite finish
Cooktop
• Framed top for connection to Cooktop
• Welded hob with 1.5mm 304 stainless steel bull nose
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
• Splashback and side panels 1.2mm 304 stainless steel
• Front panels 0.9mm 304 stainless steel
• Aluminised steel internal construction
• Cast iron 28MJ/hr open burners with forged brass cap
• Vitreous enamelled cast iron potstands
• Vitreous enamelled open burner spill covers
• Cast iron simmer plates (optional extra)
• 12mm thick mild steel griddle plate
adjustable feet
• Fully modular framed stand shelf with 0.9mm 304 stainless
steel finish
• Suitable for rear or through shelf gas connection to Cooktop
• Quick assembly design (no tools required)
Controls
• Variable high to low controls to open burners
• Open burners flame failure standard with pilot burners optional
• Variable high to low controls to griddles
• 2.5mm 304 stainless steel griddle splash guards
• Vitreous enamelled spill trays
• Griddles standard with pilot, flame failure and piezo ignition
• Large easy use control knob - heat resistant reinforced
• Easy view control settings on knob
Griddle sections are standard on RH side. Available on LH side to
order or by conversion.
Bench mount (supplied as –B model)
Cleaning and Ser vicing
• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs
• All models with easy clean stainless steel external finish
• Lift off burners heads and vitreous enamelled burner spill covers
with adjustable feet
• Adjustable height 80mm – 105mm
Cabinet base (supplied as –CB model)
• Fully modular for match suite finish
• Vitreous enamelled spill trays under open burner and
griddle sections
• Access to all parts from front of unit
• Double skin 0.9mm 304 stainless steel interior and exterior
• Optional GN 1/1 4 position racking kit
• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with
adjustable feet
|