QuickSpecs
Overview
HP ProLiant ML115
Front View:
Rear View:
1.
2.
3.
4.
5.
6.
7.
8.
9.
CD-ROM Drive
Power LED
Drive Activity LED
Well ventilated chassis design
Full Length Card Retainer
HDD controller card (Optional)
HP LO 100c Management Card (Optional)
Main System Board
1. PSU fan
2. PS/2 mouse port
3. PS/2 keyboard port
4. VGA port
5. Serial port A
6. Rear USB 2.0 ports
7. LAN port (RJ-45)
8. HP LO100c Remote Management Card port (Optional)
9. PCI slot covers
Rear System Fan
10. 370W Power Supply
10. Power supply outlet
11. Rear system fan
12. PCI slot cover lock
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 1
QuickSpecs
Standard Features
HP ProLiant ML115
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
Processor
One of the following
depending on Model
Dual-Core AMD Opteron 1210 (1.8 GHz)
Dual-Core AMD Opteron 1214 (2.2 GHz)
Single-Core AMD Athlon 3500+ (2.2 GHz)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more
details.
Dual-Core AMD Opteron 1216 (2.4 GHz)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more
details.
Dual-Core AMD Opteron 1220 SE (2.8 GHz)
NOTE: Offered through Configure-To-Order only. See Factory Integrated Models section for more
details.
Cache Memory
One of the following
depending on Model
2MB (2x1MB) Level 2 cache (Opteron models)
512KB Level 2 cache (Athlon models)
Chipset
nVidia MCP55S Pro
ECC
Memory Protection
Memory
Type
PC2-5300 unbuffered DDR2 SDRAM (667MHz)
Standard
Maximum
512 MB
8 GB
Network Controller
Expansion Slots
Embedded NC320i PCIe Gigabit Server Adapter
Slot
Bus Speed
Hot Plug Y/N
PCI Voltage
Notes
Number
4
3
X16 PCI Express
X8 PCI Express
No
No
n/a
n/a
Full Height
In a x8 slot
Full Height
1/2
32bit/33MHz PCI
No
3.3V
Full Height
NOTE: Only one brace for full length cards provided.
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity of the Heat Sink.
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 3
QuickSpecs
Standard Features
HP ProLiant ML115
Storage Controller
One of the following
depending on Model
HP 8 Internal Port SAS HBA with RAID (0,1)
Integrated 4 port SATA controller with embedded RAID (0,1,5)*
*Embedded RAID setup instructions located in User Guide, CTO RAID set-up not available.
HP ProLiant 100 Series Server User Guide:
Storage
CD-ROM
Hard Drives
SATA
48x IDE (ATAPI) CD-ROM Drive
160GB SATA 7200 rpm Drive
Maximum Internal
Storage
Type
SAS
(Not-hot plug)
1.2TB
2TB
(4x300GB)
(4 x 500GB*)
SATA
(Non-hot plug)
*Offered through Configure-To-Order only. See Factory Integrated Models section for more details
Interfaces
Parallel
Serial
0
1
1
Pointing Device (Mouse,
PS2)
Graphics
Keyboard (PS2)
USB
1
1
8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity))
NOTE: Internal USB ports are optimal for the attachment of HP USB DAT
Tape Drives
NOTE: Please see the following URL for additional information regarding
USB support:
Network RJ-45 (Ethernet)
Management
1
Optional Lights-Out 100c Remote Management port
Graphics
Integrated 2MB video controller
Micro ATX Tower (4U)
Form Factor
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 4
QuickSpecs
Standard Features
HP ProLiant ML115
Remote Management
Lights-Out 100c
Lights Out LO100c is a Remote Management Card (RMC) for HP ProLiant
100 series servers that do not have embedded LO100i. The LO100c has all
the features of the LO100i Advanced license and allows customers, or their
service providers, to remotely manage ProLiant servers over a LAN or the
Internet from anywhere, anytime regardless whether the server is located in
the same building, across town, or around the globe.
With LO100c, users can acquire complete remote control with Virtual KVM
(graphical hardware-based, remote console). Users can also access the
server's serial console, control system power, update system firmware and
software, as well as monitor system environmental conditions. The LO100c
remote management card can be accessed from a web browser or
command line interface. This virtual "at-the-server" functionality means
administrators stay in control of remote HP ProLiant 100 series servers.
The HP Lights-Out100c consists of a management processor and firmware
that provides cost-effective, entry-level lights-out functionality, basic system
board management functions, and diagnostics.
NOTE: For more information, please refer to the QuickSpecs for the
LO100c found at:
Core Infrastructure
Management
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice and customize your profile to
receive various new alerts as they become available, on a weekly or monthly
basis.
ROMPaq software and
latest drivers
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options, available through ProLiant Support Packs or
downloaded from software and drivers download pages website at:
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.3 Compliant
PXE Support
WOL Support
IPMI 2.0 compliance
Manageability
Security
Embedded IPMI standard reporting
Optional HP ProLiant Lights-Out 100c Remote Management Card
Power-on password
Setup password
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 5
QuickSpecs
Standard Features
HP ProLiant ML115
Server Power Cords
12' country specific, lowline NEMA power cord.
NOTE: Rack models ship standard with a 12' IEC cable. Most redundant power supply options ship with
a 6' country specific power cord. Localized cables included with geographic specific models in other
world regions.
Power Supply
System Fans
370 Watts
1 – Non-redundant system fan shipped standard
1 – Non-redundant CPU heatsink fan shipped standard
OS Support
Microsoft Windows Server 2003: Standard & Enterprise Edition (32 and 64 bit)
Microsoft Windows Small Business Server 2003
Microsoft Windows 2003 Server, Web Edition
Microsoft Windows Server 2008
Novell NetWare 6.5 SBS (only after SP6 release)
RedHat Enterprise Linux
SUSE Linux Enterprise Server
NOTE: For an up-to-date listing of the latest ML115 OS support matrix, please see:
NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select
NOTE: Drivers may also found on the base media for some Linux OS's. When configuring your server,
please consult your base media driver base, or visit HP.com at:
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and/or storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging and custom packaging HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers, as well as, the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 6
QuickSpecs
Standard Features
HP ProLiant ML115
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs and expectations of our valued
customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or
an Authorized Partner for assistance.
Service and Support
HP Care Pack Services provide total care and support expertise with committed response designed to
meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server
that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22"
and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the
same service level and for the same coverage period as the server. Coverage of UPS Battery is not
included and standard warranty terms & conditions apply. For servers or storage systems installed within
a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support
offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - Hardware Installation only
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 7
QuickSpecs
Models
HP ProLiant ML115
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
SATA Models
ML115 Opteron 1210
NHP-SATA (1P)
437288-xx1
Processor(s)
One of the following
depending on Model
(1) Dual-Core AMD Opteron 1210 (1.8GHz, 2MB Cache)
(1) Dual-Core AMD Opteron 1214 (2.2GHz, 2MB Cache)
Cache Memory
Memory
2MB (2x1MB) Level 2 cache (Opteron)
512 MB PC2-5300 ECC (DDR2-667Mhz) (1 x 512 MB)
HP Embedded 4 Port SATA Controller with embedded RAID (0,1,5)
160GB SATA HDD
ML115 Opteron 1214
NHP-SATA (1P)
437289-xx1
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor
Maximum 2TB (4 x 500GB) SATA
48x CD-ROM
Micro ATX Tower
SAS Models
ML115 Opteron 1214
NHP-SAS (1P)
Processor(s)
(1) Dual-Core AMD Opteron 1214 (2.2GHz, 2MB Cache)
2MB (2x1MB) Level 2 cache (Opteron)
512 MB PC2-5300 ECC (DDR2-667Mhz) (1 x 512 MB)
HP 8 Internal Port SAS HBA with RAID (0,1)
72GB SAS HDD
Cache Memory
Memory
437290-xx1
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor
Maximum 1.2TB (4 x 300GB) SAS
48x CD-ROM
Micro ATX Tower
Country Code Key
xx=00
xx=01
xx=03
xx=04
xx=05
xx=20
xx=37
xx=42
xx=AA
xx=29
xx=AB
xx=AD
NA
Australia
UK
Germany
France
Brazil
AP
Euro
PRC
Japan
Taiwan
Korea
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 8
QuickSpecs
Configuration Information-Factory Integrated Models
HP ProLiant ML115
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models
HP ProLiant ML115 NHP CTO Chassis (North America)
439138-B21
Factory Integrated Models ship with:
Embedded NC320i PCI Express Gigabit Server Adapter
Keyboard and Mouse
370 Watts, PFC (Power Factor Correcting)
Tower Form Factor (4U)
NOTE: HP SATA Drive Models are limited to <2TB support.
NOTE: On SATA models with embedded RAID, setup instructions are located in User
Guide, CTO RAID is set-up not available. HP ProLiant 100 Series Server User Guide:
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processors
AMD Athlon Processor Model 3500+ (2.2 GHz) Option Kit, FIO
AMD Opteron™ Processor Model 1220SE (2.8 GHz) Option Kit, FIO
AMD Opteron Processor Model 1216 (2.4 GHz) Option Kit, FIO
AMD Opteron Processor Model 1214 (2.2 GHz) Option Kit, FIO
AMD Opteron Processor Model 1210 (1.8 GHz) Option Kit, FIO
440962-L21
437376-L21
437375-L21
437374-L21
437373-L21
Memory
2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)
1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)
512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)
432806-B21
432804-B21
432803-B21
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 9
QuickSpecs
Configuration Information-Factory Integrated Models
HP ProLiant ML115
Hard Drives
Serial ATA (SATA) - Non-hot Plug HDD
HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO*
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
* Factory Integrated Only
404469-B21
411276-B21
411275-B21
383410-B21
HP Non-Hot Plug SATA Cable
442901-B21
NOTE: The purchase of a SATA Hard Disk Drive requires the purchase of HP SATA
Cable option kit (P/N 442901-B21).
Serial Attached SCSI (SAS) Non-Hot Plug
HP 300GB SAS 3.5" 15K NHP
HP 146GB SAS 3.5" 15K NHP
HP 72GB SAS 3.5" 15K NHP
431950-B21
432093-B21
432095-B21
Optical Drives
CD-RW/DVD-ROM Combo Drive Option Kit
HP DVD+R/RW 8X HH
331346-B21
383974-B21
398972-B21
217053-B21
HP ProLiant 48X CD
DVD ROM Drive 16x
NOTE: For the installation of Windows and other OS's, a floppy drive (DC361B) may
be required to complete driver installation. A USB drive key may not work to complete
driver installation.
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below.
NOTE: Some options may not be factory integratable. Please contact your local sales representative for
additional information.
Operating Systems
Pre-install Microsoft Windows 2003 SBS Standard Edition
MS W2003 SBS R2 Std 1XX FIO Eng SW
432564-xx1
432566-xx1
MS W2003 SBS R2 Prm 1XX FIO Eng SW
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 10
QuickSpecs
Configuration Information-Factory Integrated Models
HP ProLiant ML115
Country Code Key
xx=00
xx=01
xx=03
xx=04
xx=05
xx=06
xx=07
xx=20
xx=21
xx=22
xx=24
xx=33
xx=37
xx=42
xx=AA
xx=29
xx=AB
xx=AD
NA
Australia
UK
Germany
France
Italy
Spanish
Brazil
Hungarian
Czech
Polish
Dutch
AP
Euro
PRC
Japan
Taiwan
Korea
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 11
QuickSpecs
Options
HP ProLiant ML115
Memory
2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)
432806-B21
432804-B21
432803-B21
1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)
512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)
Optical Drives
CD-RW/DVD-ROM Combo Drive Option Kit
48X CD-ROM Option, Carbon
331346-B21
398972-B21
383974-B21
DC361B
DVD-RW Drive Option Kit
1.44 MB USB Diskette Drive
NOTE: For the installation of Windows and other OS's, a floppy drive may be
required to complete driver installation. A USB drive key may not work to complete
driver installation.
Hard Drives
Serial – ATA (SATA) – Non-Hot Plug (SATA Models Only)
HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD
HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD
411276-B21
411275-B21
383410-B21
NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives, please
reference the Configuration Information Section of this QuickSpecs to order via
Configuration to Order.
HP Non-Hot Plug SATA Cable
442901-B21
NOTE: The purchase of a SATA Hard Disk Drive requires the purchase of HP SATA
Cable option kit (P/N 442901-B21).
Serial Attached SCSI (SAS) Non-Hot Plug (SAS Models Only)
HP 300GB SAS 3.5" 15K NHP
431950-B21
432093-B21
432095-B21
HP 146GB SAS 3.5" 15K NHP
HP 72GB SAS 3.5" 15K NHP
NOTE: The purchase of SAS hard drives requires the purchase of part number
430479-B21, the HP Internal SAS/SATA 4-Port Cable. This cable is standard in the
SAS BTO model.
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 12
QuickSpecs
Options
HP ProLiant ML115
Storage Controllers
HP SC44Ge Host Bus Adapter
416096-B21
412911-B21
347786-B21
HP SC11Xe Host Bus Adapter
HP 8 Internal Port SAS HBA with RAID
NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity to Heat
Synk.
HP Smart Array E200/128 BBWC Controller
411508-B21
374654-B21
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity to Heat
Synk
128MB Battery-Backed Write Cache Enabler
351580-B21
430479-B21
NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller and
Smart Array 642 Controller.
HP SAS/SATA 4-Port Cable
NOTE: The purchase of a SAS Storage Controller requires the purchase of HP
SAS/SATA 4-Port Cable (P/N 430479-B21)
NOTE: On SATA models with embedded RAID, setup instructions are located in User
Guide, CTO RAID is set-up not available. HP ProLiant 100 Series Server User Guide:
Communications
HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000
434905-B21
HP NC360T PCI Express Dual Port Gigabit Server Adapter
Agere 2006 PCI Hi-Speed 56K Modem
412648-B21
440519-B21
Tape Backup Drives
NOTE: Installation of SCSI internal tape drives in a ML115 model requires SCSI
controller kit (PN: 374654-B21).
NOTE: For complete listing of tape drive offerings see:
USB Tape Drives
HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite)
HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite)
HP DAT160 USB Internal Tape Drive for ProLiant
DAT SAS Tape Drives
DW022A
DW026A
Q1580A
HP StorageWorks DAT 160 SAS Internal Tape Drive
DAT SCSI Tape Drives
Q1587A
HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon)
HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon)
HP StorageWorks DAT 160 SCSI Internal Tape Drive (Carbon)
C5686C
Q1522B
Q1573A
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 13
QuickSpecs
Options
HP ProLiant ML115
HP D2D Backup System HP StorageWorks D2D110 Backup System
NOTE: 1TB of Disk Storage.
EH880A
HP StorageWorks D2D110 Backup System with Data Protector Express Software Kit
NOTE: 1TB of Disk Storage
EH923A
EH884A
EH924A
EH950A
EH951A
EH952A
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage.
HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage.
HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional
information:
(Worldwide)
Installation of Server into Monitor/Utility Shelf
Racks
253449-B21
437372-B21
Remote Management
UPS
HP ML115 Lights-Out 100c Remote Management Card
HP T1000 UPS, JPN/TWN
HP T1000 UPS, NA
AF404A
AF403A
HP T1000 UPS, INTL
AF405A
HP T750 UPS, Low Voltage (NA/JPN)
HP T750 UPS, High Voltage (INTL)
378439-D71
378439-B31
USB Options
HP 1GB USB 2.0 Floppy Drive Key
HP 256MB USB 2.0 Floppy Drive Key
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP USB 04 Standard Keyboard
442085-B21
442084-B21
DC172B
DT528A#xxx
DG954A
USB 2.0 4-port HUB
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 14
QuickSpecs
Options
HP ProLiant ML115
HP KVM Switch Options HP 1x4 Console Switch
AF611A
AF612A
AF613A
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: Required for supporting USB peripherals.
NOTE: For additional information regarding KVM Switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 15
QuickSpecs
Service and Support, HP Care Pack, and Warranty Information
HP ProLiant ML115
Service and Support
Offerings
(HP Care Pack Services)
Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years
U4434E
U4435E
24-Hour x 7-Day Coverage, 3 Years
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years
U4433E
U4436E
U4444E
Hardware Services 6 Hour Call-to-Repair
24-Hour x 7-Day Coverage, 3 Years, 6 Hour Call-to-Repair
Hardware Installation Service
HP Install ProLiant ML115 Service
NOTE: For more information, customer/resellers can contact
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 16
QuickSpecs
Memory
HP ProLiant ML115
HP ProLiant ML115 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
512 MB of PC2-5300 DDR2 SDRAM running at 512 MB with ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM).
Standard Memory Plus Optional Memory
Up to 5120 MB memory is available with the optional installation of PC2-5300 un-buffered ECC DDR2 SDRAM DIMM Memory
kits.
Standard Memory Replaced with Optional Memory
Up to 8192 MB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC2-
5300 un-buffered ECC DDR2 SDRAM DIMM Memory kits.
NOTE: The below chart does not represent all possible memory configurations.
NOTE: In memory configurations requiring 2 DIMM and 4 DIMM configurations, the memory must be paired for optimal
performance. This means that DIMMs in slot 1 and 3 have to be identical, in slot 2 and 4 have to be identical. (For example, the
Optional memory configuration shown below)
Memory
512 MB
Slot
4
3
2
1
Standard
Optional
Maximum
Empty
2048 MB
2048 MB
Empty
512 MB
2048 MB
Empty
2048 MB
2048 MB
512 MB
512 MB
2048 MB
5120 MB
8192 MB
Following are memory options available from HP:
2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)
1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)
512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)
432806-B21
432804-B21
432803-B21
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 17
QuickSpecs
Storage
HP ProLiant ML115
1
2
48x IDE (ATAPI) CD-ROM
Removable Media Bays (1.6" each)
3, 4, 5, 6 Four (4) Non-Hot Plug Drive Bays
Drive Support
Quantity
Position
Supported
Supported
Controller
Removable Media
DVD + CDRW Drive
DVD-RW Drive
2
2
1 or 2
1 or 2
Integrated IDE (ATAPI)
Integrated IDE (ATAPI)
Hard Drives (SATA Models only)
SATA 1.5Gb – Non-Hot Plug
Quantity
Position
Supported
Supported
Controller
3.5-inch
Up to 4
3,4,5,6
4 Port SATA controller with Embedded RAID on Motherboard (0,1,5)
500GB 7.2K SATA
250GB 7.2K SATA
160GB 7.2K, SATA
80GB 7.2K, SATA
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 18
QuickSpecs
Storage
HP ProLiant ML115
Hard Drives (SAS Models only)
SAS – Non-Hot Plug
Quantity
Position
Supported
Supported
Controller
3.5-inch
Up to 4
3,4,5,6
HP 8 Internal Port SAS HBA with RAID (0,1)
300GB 15K SAS
145GB 15K SAS
72GB 15K, SAS
Maximum Storage Capacity – SATA/SAS Models
Internal
SATA
1TB (4x250GB (BTO)
2TB (4 x 500GB (CTO)
SAS
1.2TB (4x300GB)
Total
SATA
1TB (4x250GB (BTO)
2TB (4 x 500GB (CTO)
SAS
1.2TB (4x300GB)
Tape Drives and D2D Backup System
NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models.
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
Position
Supported
Controller
Controller/HBA
Option Kit Part
Number
Internal USB Tape Drives
DAT 40 USB
2
USB 2.0 port
N/A
DAT 72 USB
DAT 160 USB
External USB Tape Drives
DAT 40 USB
External
USB 2.0 port
N/A
DAT 72 USB
DAT 160 USB
Internal SAS Tape Drives
DAT 160 SAS
2
External
2
HP SC44Ge Host Bus Adapter
HP SC44Ge Host Bus Adapter
HP SC11Xe Host Bus Adapter
416096-B21
416096-B21
412911-B21
External SAS Tape Drives
DAT 160 SAS
Internal SCSI Tape Drives
DAT 40
DAT 72
DAT 160
External SCSI Tape
Drives
External
HP SC11Xe Host Bus Adapter
412911-B21
DAT 40
DAT 72
DAT 160
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 19
QuickSpecs
Storage
HP ProLiant ML115
HP StorageWorks D2D
Backup Systems
D2D110
Embedded Network Controller
N/A
D2D120
D2D130
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 20
QuickSpecs
Power Specifications
HP ProLiant ML115
Part Number
Spare Kit
416121-001
419029-001
Operational Input Voltage Range
(Vrms)
100 to 127 and 200 to 240 V auto ranging
Frequency Range (Nominal) (Hz)
50 to 60 Hz
Nominal Input Voltage (Vrms)
Max Rated Output Wattage Rating
Nominal Input Current (A rms)
100
N/A
N/A
N/A
115
370
8
208
N/A
N/A
N/A
220
N/A
N/A
N/A
230
370
4
240
N/A
N/A
N/A
Max Rated Input Wattage Rating
(Watts)
N/A
N/A
Max. Rated VA (Volt-Amp)
Efficiency (%)
N/A
N/A
N/A
N/A
>65%
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
>65%
N/A
N/A
N/A
N/A
N/A
Power Factor
Leakage Current (mA)
0.25mA (at
60HZ)
N/A
N/A
Maximum Inrush Current (A peak)
N/A
No
N/A
N/A
No
N/A
component
component
was damaged
and input fuse
shall not blow
was damaged
and input fuse
shall not blow
Maximum Inrush Current duration (mS)
N/A
N/A
N/A
N/A
N/A
N/A
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 21
QuickSpecs
System Specifications
HP ProLiant ML115
Power **
HP ProLiant ML115 Fully Configured (see **)
Fully Loaded System output Wattage
(W)
370W
Fully Loaded System Input Current (A
rms)
8A @ 115V, 4A @ 230V
Fully Loaded System Thermal (BTU- Hr) 1907BTU
Fully Loaded System VA (Volt-Amp) 920
System Leakage with all power supplies 0.75mA@240V
loaded (mA)
0.45mA@120V
System Inrush Current with all power
supplies loaded (A)
80A
Power cord requirements
Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided
DIMMs, (4) HDDs, (1) CD-ROM, (1) DVD-ROM, (4) PCI cards, and (1) power supply.
Power Cords (13 Cord Sets)
Power Cord Part Number
Country
APD
100614-009, 100613-008, 139867-004, 187487-004 (India)
Brazil
285052-001
100661-001
100614-009
100614-009
100614-009
139867-004
286496-001
100613-008
121565-001
Australia
Euro
France
Germany
Japan
PRC
UK
US, Taiwan
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 22
QuickSpecs
Technical Specifications
HP ProLiant ML115
System Unit
Dimensions (HxWxD)
(with feet)
14.46 x 6.88 x 16.76 in (36.7 x 17.5 x 42.6 cm)
23.15 lb (10.5 kg)
Weight (approximate)
Input Requirements
(per power supply)
Range Input Voltage
Normal Line Voltage
50 to 60 Hz
100 to 127 VAC/200 to 240 VAC
115 or 230 VAC
Line Frequency
Rated Input Current
BTU Rating
load 8A at 115VAC, 4A at 230VAC
1907 BTU
SCSI Connectors
(SCSI Models only)
One internal LVD/SE connector for U160 devices, plus two internal SE
connectors for legacy devices.
Power Supply Output
Rated Steady-State Power 370W
Power (per power supply)
Maximum Peak Power
Operating
370W
Temperature Range
50° to 95° F (10° to 35° C)
-31° to 140° F (-35° to 60° C)
10% to 90%
Shipping
Relative Humidity
(non-condensing)
Operating
Non-operating
10% to 95%
Acoustic Noise
Idle
(Fixed Disk Drives
Spinning)
L WAd (BELS)
L pAm (dBA)
5.4
36
Operating
(Random Seeks to Fixed
Disks)
L WAd (BELS)
L pAm (dBA)
5.9
38
HP 160GB 1.5G SATA
7.2K NHP 3.5" HDD
411275-B21
160GB 7,200 rpm
Capacity
Height
160,041 MB
1.0 in. (26.1 mm)
4.0 in. (101.6 mm)
Serial ATA
Width
Interface
Transfer rate synchronous 1.5 Gb/s
(maximum)
Seek time (typical reads, Single track
0.9 ms
including settling)
Average
9.0 ms
Full-stroke
17.8 ms
7,200 rpm
512
Rotational speed
Bytes/Sector
Logical Blocks
Physical Configuration
312,581,808
Operating Temperature 41° to 131° F (5° to 55° C)
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 23
QuickSpecs
Technical Specifications
HP ProLiant ML115
NHP 72GB 3G SAS 15K
3.5" HDD
431950-B21
72GB 15K
Capacity
Height
73,407,856,856
1.0 in (25.4mm)
4.0 in. (101.6 mm)
SAS
Width
Interface
Transfer rate synchronous 3 Gb/sec
(maximum)
Seek time (typical reads, Single track
0.27 ms
3.5 ms
including settling)
Average
Full-stroke
3.5 ms
Rotational speed
Bytes/Sector
Logical Blocks
15,000 rpm
512
Physical Configuration
143,374,737
Operating Temperature 50° to 95° F (10° to 35° C)
48X Max IDE (ATAPI) CD- Disk
ROM Drive
398972-B21
Applicable Disk
Capacity
CD-ROM, CD-XA, CD-DA
(Mode 1, Mode 2, Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R
540MB (Mode 1, 12 cm)
650MB (Mode 2, 12 cm)
2,048 bytes, 1024 bytes
2,340 bytes, 2,336 bytes, 1024 bytes
2,352 bytes
Block Size
Mode 1
Mode 2
CD-DA
CD-XA
2,328 bytes
Interface
IDE (ATAPI)
Random
Access Times (typical)
<100 ms
Full-Stroke
Sustained
Burst
<150 ms
Data Transfer Rate
3000 to 7200 KB/s (20X to 48X)
150 KBps to 7,200 KBps
16.7 MBps
Bus Rate
Cache Buffer
128 KB
Start-up Time (typical)
Stop Time
< 7 seconds
< 4 seconds
Type
Laser Parameters
Semiconductor Laser GaA1As
780 ± 25 nm
Wave Length
Temperature
Humidity
(HxWxD, maximum)
Weight
Operating Conditions
Dimensions
41° to 122° F (5° to 50° C)
10% to 90%
1.63 x 5.75 x 7.87 in (41.3 x 146 x 200 cm)
2.64 lb (1.2 kg)
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 24
QuickSpecs
Technical Specifications
HP ProLiant ML115
4 port Embedded SATA
controller
SATA Protocol
SATA 2, 3Gb/s
SATA Ports
4 internal
Port transfer rate
Maximum Capacity
RAID Levels Supported
1.5 Gb/s total
up to 2 TB (4 x 500GB non hot plug SATA HDD)
RAID 1+0 (Striping & Mirroring)
RAID 1 (Mirroring)
RAID 0 (Striping)
RAID 5 (Striping with parity)
Logical RAID Volumes
Supported
NOTE: On SATA models with embedded RAID, setup instructions are
located in User Guide, CTO RAID is set-up not available. HP ProLiant 100
Series Server User Guide:
HP 8 Internal Port SAS
Host Bus Adapter with
RAID
Dimensions (excluding
bracket)
6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
Disk Drive and Enclosure 3 Gbps SAS (Serial Attached SCSI)
Protocol Support
(SAS Model only)
1.5 Gbps SATA (Serial Advanced Technology Attachment)
Architecture
64-bit
SAS Connectors
2 internal SFF8484 x4 Wide SAS Connectors
12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
Data Transfer Method
PCI Bus Speed
PCI
64-bit wide, PCI-X 133 MHz (1 GB/s maximum bandwidth)
PCI-X-133 and 3.3 volt PCI compatibility only
PCI-X and 3.3 volt PCI compatibility only
2 x4 Wide SAS Connectors
Simultaneous Drive
Transfer Ports
Port Transfer Rate
12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
Yes
Software upgradeable
Firmware
Maximum Capacity
Memory Addressing
576GB (8 x 72GB)
64-bit, supporting servers memory greater than 4 GB
Logical Drives Supported Up to 2 Logical Volumes
Up to 10 drives total in all RAID volumes
Up to 2 Drives per RAID 1
Up to 8 Drives per RAID 0
RAID Support
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
4-MB flashable ROM
Disk Drive and Enclosure 3 Gbps SAS and 1.5 Gbps SATA
Protocol Support
NOTE: Slot 2 only supports standard PCI 32 bit add-on card due to proximity of the Heat Sink.
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 25
QuickSpecs
Technical Specifications
HP ProLiant ML115
Embedded NC320i PCIe
Gigabit Server Adapter
Network Interface
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
Compatibility
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method
Network Transfer Rate
Single lane (x1), 100MHz PCI Express Reference Clock
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
10 Mb/s
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
Full-Duplex)
2000Mb/s
Connector
RJ-45 connector
10Base-T
Cable Support
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
Category 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX
Environment-friendly
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
Products and Approach and Recycling
programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
AMD, the AMD Arrow logo, AMD Opteron™, and combinations thereof, are trademarks of Advanced Micro Devices, Inc.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12704
Worldwide — Version 16 — May 12, 2008
Page 26
|