Table of Contents
IMPORTANT SAFEGUARDS ............................................................................4-5
T
H
A
N
K
Thank You Letter...............................................................................................................................................8
Unpacking Your New TV...................................................................................................................................9
Special Features ...............................................................................................................................................9
Y
O
U
Front Control Panel Functions ......................................................................................................................12
Back Panel Functions.....................................................................................................................................13
How Connections Affect:
PIP and POP ..............................................................................................................................................14
System 4 Home Theater IR Control....................................................................................................14-15
Connecting to Your New Mitsubishi Bigscreen:
Antenna or Wall Outlet Cable ..................................................................................................................16
Cable Box...................................................................................................................................................16
VCR .........................................................................................................................................................17
Audio Receiver..........................................................................................................................................18
DVD Player or S-Video Device.................................................................................................................19
DTV Receiver....................................................................................................................................... 20-21
Computer ...................................................................................................................................................22
System 4 Home Theater IR Control.........................................................................................................22
IMPORTANT NOTES #1 ..................................................................................................................................23
I
N
S
T
A
L
L
A
T
I
O
N
Programming the Remote Control: To Control Other A/V Products.................................................. 26-27
Programming the Remote Control: To Activate the System 4 Home Theater IR Control ................ 28-29
on-screen menu system ......................................................................................................................30
Using
...............................................................................................................................................30
Menu Screens (Overview)...................................................................................................................31-32
Setup Menu................................................................................................................................................33
Memorize Channels ............................................................................................................................33
Assign Input.........................................................................................................................................33
Language .............................................................................................................................................33
Closed Captions Menu .............................................................................................................................34
Channel Menu ...........................................................................................................................................35
V-Chip Lock ......................................................................................................................................... 36-38
Advanced Menu.........................................................................................................................................39
Timer.....................................................................................................................................................39
Convergence.................................................................................................................................. 40-41
Audio/Video Menu .............................................................................................................................. 42-43
Clock Menu.......................................................................................................................................... 44-45
A/V Setting Descriptions ................................................................................................................... 46-47
S
E
T
U
P
Remote Control Functions....................................................................................................................... 50-57
Overview ....................................................................................................................................................50
Care and Operation ..................................................................................................................................51
Channel Selection.....................................................................................................................................52
Sleep Timer................................................................................................................................................52
System 4 Home Theater IR Control.........................................................................................................53
Special Functions .....................................................................................................................................54
Operation of PIP and POP.................................................................................................................. 54-55
Display Formats .................................................................................................................................. 56-57
IMPORTANT NOTES #2 ..................................................................................................................................58
O
P
E
R
A
T
I
O
N
Appendix A: Bypassing the V-Chip Lock ...........................................................................................................59
Appendix B: High De ni tion Input sConnect ion Comp at ibi lity .......................................................................61
Appendix C: Remote Control Programing Codes .............................................................................................62
Appendix D: Cleaning and Service .....................................................................................................................63
Appendix E: Troubleshooting..............................................................................................................................64
Index................................................................................................................................................................. 65-66
Mitsubishi Projection TV Limited Warranty .......................................................................................................67
3
IMPORTANT SAFEGUARDS
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions
Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions
for future reference. Follow all operating and use instructions.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners
can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Attachments and Equipment
Never add any attachments and/or equipment without approval of the manufacturer as such additions may
result in the risk of re, el ect ricshock or ot her per sonal inj ur y.
5. Water and Moisture
Do not use the TV where contact with or immersion in water is possible. Do not use near bath tubs, wash
bowls, kitchen sinks, laundry tubs, swimming pools, etc.
6. Accessories
Do not place the TV on an unstable cart, stand, tripod, or table. The TV may fall, causing
serious injury to a child or adult and serious damage to the TV. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting
of the TV should follow the manufacturer’s instructions, and should use mounting accessories
recommended by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart combination to overturn.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and
to protect it from overheating. Do not block these openings or allow them to be obstructed by placing the TV
on a bed, sofa, rug, or other similar surface. Nor should it be placed over a radiator or heat register. If the
TV is to be placed in a rack or bookcase, ensure that there is adequate ventilation and that the manufacturer’s
instructions have been adhered to.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug having one blade wider than the other. This
plug will t int ot he power out let onl yone way. If you ar eunabl et oi nser t the pl ug f ul lyi nt ot he out let , try
reversing the plug. If the plug should still fail to t, cont act your el ect rici an t or epl ace your obsol et eout let . Do
not defeat the safety purpose of the polarized plug.
10. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the TV.
11. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the TV due to lightning and power-line surges.
4
IMPORTANT SAFEGUARDS Continued
12. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
13. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of reor el ect ricshock.
14. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or
short-out parts that could result in reor el ect ricshock. Ne ver spi ll liqui dof any ki nd on or int ot he TV.
EXAMPLE OF ANTENNA GROUNDING
15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be
ANTENNA
LEAD IN WIRE
sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
Section 810 of the National Electric Code, ANSI/NFPA No.
ELECTRIC
70-1984, provides information with respect to proper grounding of
SERVICE
GROUNDING
EQUIPMENT
CONDUCTORS
the mast and supporting structure, grounding of the lead in wire to
(NEC SECTION 810-21)
an antenna discharge unit, size of grounding conductors, location
GROUND CLAMPS
of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC — NATIONAL ELECTRICAL CODE
16. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to quali ed ser vi ce per sonnel .
17. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to quali ed ser vi ce per sonnel under the f ol lowi ng
conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions, adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a quali ed t echni ci an t or est or et he TV t oi tsnor ma l oper at ion.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts speci ed
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in re, el ect ricshock or ot her hazar ds.
19. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to
determine that the TV is in safe operating condition.
20. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including ampli er s) that pr oduce heat .
5
If you have questions regarding your television, call
Consumer Relations
at (800) 332-2119, or email us at
To order replacement or additional remote controls or owner’s
guides
call (800) 553-7278
or
visit our website at www.mitsubishi-tv.com
Thank You
Thank You Letter ............................8
Unpacking Your New TV .................9
Special Features..............................9
7
Part I: Thank You
We at Mitsubishi Would Like to Thank You
To the Mitsubishi Consumer:
Thank you for choosing Mitsubishi as your premier home
entertainment partner. Whether this is your rst Mi tsubi shi
consumer electronics product or an addition to your growing
Mitsubishi family, you should be proud and delighted for
choosing one of the most technologically advanced bigscreens
available today.
Unlike typical television manufacturers, we have based our
primary design and engineering capabilities in North America
at our California headquarters. As a result, the engineers who
design our television products live in the same communities
as our customers. They know how our customers think and
what their goals and desires are. They know that today’s
consumer has never been more sophisticated and that the
way to reach that consumer is to deliver technically advanced
products at prices that our competition simply can’t match.
When you look at your new Mitsubishi bigscreen television,
please see all of us who built it, because when we build it, we
see you.
Thank You Again,
The Mitsubishi Team
8
Part I: Thank You
Unpacking Your New TV
Please take a moment to review the follow-
ing list of items to ensure that you have
received everything included:
Special Features
Your new HD-Upgradeable bigscreen televi-
sion has many special features that make it
the perfect addition to your home entertain-
ment system. Below we have highlighted a
handful.
1
Remote Control
2
3
4
(2) AAA Batteries
(3) IR Emitter Cables
Product Registration Card
Owner’s Guide
HD-Upgradeable
With the use of an optional HDTV receiver
like the Mitsubishi SR-HD500 or similar
model, your Mitsubishi bigscreen can dis-
Quick Reference Card
play high de ni tion pi ct ur es.
See pages 20 & 21.
VCR
CABLE/DBS/DTV
TV
DVD
AUDIO
Wide Screen Picture Format
POWER
2
5
8
0
3
1
You will be able to view pictures as the
directors intended you to see them. Both
DTV and DVD’s supporting the widescreen
format will enable you to enjoy a theater feel
4
6
HOME
THEATER
7
9
SLEEP
VIDEO
SQV
QV
INPUT CHANNEL VOLUME
AUDIO
MUTE
HOME
ENTER
EXCH
ADJUST
in the comfort of your home.
See pages 56-57.
CANCEL
MENU
INFO
PIP CH
V-CHIP PIPINPUT
FORMAT PIP/POP
GUIDE
PAUSE
REC
STOP
PIP/POP Viewing Option
Using Picture-in-Picture and Picture-outside-
Picture will give you exciting options for view-
REW/REV
PLAY
FF/FWD
ing your favorite programs.
See pages 54-55.
1
2
Remote Control
(2) AAA Batteries
V-Chip Technology
Mitsubishi understands that you may want to
shield certain viewers from speci cpr ogr am
content. Your Mitsubishi bigscreen will allow
you to restrict Programming by general con-
tents, speci ccont ent s, or even by t ime .
See pages 36-38.
3
(3) IR Emitter Cables
Multibrand Remote Control
Your Mitsubishi remote control can be pro-
grammed to control many other audio/video
components.
See page 26 & 27.
PRODUCT
REGISTRATION
Send this
card in to
register your
purchase
4
Product Registration Card
9
nlike
typical
television
manufacturers, we have based our
primary design and engineering
U
capabilities in North America at our
California headquarters. As a result,
the engineers who design our television
products live in the same communities as our
customers. They know how our customers
think and what their goals and desires
are. They know that today’s consumer has
never been more sophisticated and that the
way to reach that consumer is to deliver
technically advanced products at prices that
our competition simply can’t match.
Installation
Front Control Panel Functions .....12
Back Panel Functions ...................13
How Connections Affect:
PIP and POP...............................14
System 4 Home Theater
IR Control ..............................14-15
Connecting to Your New Mitsubishi
Bigscreen:
Antenna or Wall Outlet Cable ...16
Cable Box ...................................16
VCR .............................................17
Audio Receiver...........................18
DVD Player..................................19
S-Video Device...........................19
DTV Receiver ....................... 20-21
Computer....................................22
System 4 Home Theater
IR Control ...................................22
IMPORTANT NOTES #1.................23
11
Part II: Installation
Front Control Panel
(MONO)
AUDIO
S-VIDEO
VIDEO
L
R
CANCEL
ENTER
INPUT
MENU
A/V RESET
POWER
INPUT-4
ADJUST
Figure 1. Front Control Panel.
IRIS™
Intelligent Room Illumination (light) Sensor. Turn this feature on or off using the VIDEO
button on your remote control. When the IRIS is on, your TV will automatically adjust
picture contrast and brightness for the best picture based on your room lighting. When on,
do not block the sensor to ensure an optimum picture.
POWER
Power (used for Timer function)
During normal operation, the power light will glow steady green when the TV is on, and
not glow when the TV is off. When the TV is set to turn on at a speci cti me , the gr een
power light will blink while the TV is off. Please see Timer, page 39, for timer setup
instructions.
A/V RESET
A/V Reset
Press this button to reset the A/V memory on all eleven inputs to the factory default settings.
Please see A/V Memory Reset, page 42, for instructions.
(MONO)
S-VIDEO
VIDEO
L
AUDIO
R
INPUT-4
Input 4
This input can be used for convenient connection of a camcorder or other video device to
the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is
deactivated. The VIDEO terminal is active when there is no S-Video connection.
12
Part II: Installation
Back Panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
8
6
1 (YPrPb)
2 (YPrPb)
1
2
3
Y
G
7
INPUT
1
OUTPUT
STB
2
3
MONITOR
PIP
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
AUDIO-
RIGHT
ANT-A
LOOP OUT
ANT-B
4
IR EMITTER HOME THEATER
5
1
STB (Set-Top-Box)
This input can be used for the connection of any device with an S-Video output.
2
Inputs 1-3
These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, laser
disc player, or other A/V device to the TV. Please note that if you connect to the S-VIDEO
terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is
no S-Video connection.
3
Output (Monitor and PIP)
The Monitor Output sends the TV audio and video signals, excluding component video,
VGA, or DTV video, to an A/V receiver or other equipment. The PIP output sends the
PIP’s or POP’s audio signal to an ampli er or wirel ess headphones. If noPI Por POP is
displayed, the PIP output will send the main picture audio signal.
4
Antenna (ANT-A, LOOP OUT, and ANT-B)
ANT-A and ANT-B receive signals from VHF/UHF antennas or a cable system. LOOP OUT
sends the ANT-A signal out to another component, such as a cable box or VCR.
5
IR Emitter Home Theater (System 4 Home Theater IR Control)
Connecting IR emitters here allow the TV to automatically change a digital A/V receiver’s
input in a home theater setup, and pass IR commands to other A/V devices.
6
VGA
This input can be used for the connection of a computer. Please see Appendix B, page
61, for signal compatibility.
7
Component Inputs 1-2
These inputs can be used for the connection of A/V equipment with component video
outputs, such as a DVD player. Please see Appendix B, page 61, for signal compatibility.
8
DTV Input
This input is used to connect a DTV receiver, and can be con gur ed f or HDTV c omp onent ,
RGB sync on green, and RGB plus H&V. Please see Appendix B, page 61, for signal
compatibility.
13
Part II: Installation
How Connections Affect the PIP and POP
To see a picture in the PIP or POP inset, you
may need to select an input source. If the
only input connected is ANT-A, then both
the main picture and the PIP/POP insert
will be from that input source. If other
video equipment is connected, you may be
able to view these input sources as the
PIP/POP insert. When connecting your new
Mitsubishi bigscreen, it is important to under-
stand which main picture and PIP/POP input
sources can and cannot be used together.
Table 1 shows which inputs can and cannot
be used together and the limitations they
may require. To see if 480i, DTV 480p,
1080i, Conponent-1 or Component-2 480p is
being displayed as the main picture, press
INFO on the TV remote control. The on-
screen display, gur e1, wi ll list 480i , 480p or
1080i when those signals are being received.
See Operation of PIP and POP, pages
54-55, for operating instructions. An aster-
isk (*) displayed after the signal type indi-
cates that the signal being received is
a non-standard format. A non-standard
format signal may or may not display prop-
erly in a PIP/POP inset.
PIP/POP
MAIN
COMPONENT
INPUTS 1-2
ANT-A
OK*
OK
ANT-B
NO PIP/POP
OK*
INPUTS 1-4
OK
DTV
OK
OK
OK
STB
OK
ANT-A
ANT-B
OK
OK
OK
OK
INPUTS 1-4
OK
OK
OK**
OK
OK
OK
OK
OK
OK POP
NO PIP
COMPONENT
INPUTS 1-2
OK
OK
OK**
OK
DTV
OK
OK
OK
OK**
OK
OK
OK
OK
OK
OK**
STB
VGA
NO PIP
Table 1. *No Side-by-Side with the same channel.
**No Side-by-Side with the same input.
PIP cannot display VGA.
DTV 31.
∗∗
1080i
DTV 31.
∗∗
480p
4:09 A
Tuesda
or
4:09 AM
Tuesday
Signal Strength
Figure 1. On-screen display will show 480i, 480p, or
1080i when those signals are being received.
How Connections Affect the System 4 Home Theater IR Control
The Mitsubishi System 4 Home Theater IR
Control is a special feature that makes it
to change inputs. You will automatically
hear the high quality digital surround sound
easier to use your TV with a digital surround from digital products like your DTV receiver
sound A/V receiver. Once your equipment
is properly connected and set up, your TV
and digital A/V receiver will change inputs
together, to match high resolution pictures
with the proper surround sound.
and DVD player, and high quality analog
stereo or surround sound from non-digital
products like your VCR.
Additionally, all IR remote signals from your
Mitsubishi remote or other manufacturers
remote will be passed through your TV to
your A/V devices. Your A/V devices can
When you change inputs on your TV to
watch different video products, your TV will
send signals via your remote control and the be hidden or behind cabinet doors and con-
infrared emitters to your digital A/V receiver trolled by pointing the remote at the TV.
14
Part II: Installation
Special Setups: A/V Equipment (For System 4 Home Theater IR Control)
•Auto Standby: ON (See your A/V receiver’s
Owner’s Guide for this procedure). For all TV
use, the sound will come from the A/V receiver.
Not available with all A/V receivers.
•Digital Input Assignment for DVD: Assign the
digital input you used for your DVD player to the
A/V receiver’s DVD input selector. This proce-
dure is explained in your A/V receiver’s Owner’s
Guide.
VCR: Connect the cables to the TV as
directed on page 17, with one exception.
Connect the audio output connection to the
appropriate input on the back of the A/V
receiver (as shown in table 1).
DVD: Connect the cables as directed on
page 19 (using the COMPONENT-1 input),
with one exception. Connect the digital
audio output connection on the DVD player
to the appropriate digital input on the back
of the digital A/V receiver (as shown in table
1).
•Digital Assignment for DTV: Assign the digital
input you used for DTV to the A/V receiver’s DTV
input selector.
Infrared Emitter: Connect as shown on
page 22.
DTV: Connect the cables as directed on
pages 20-21, with one exception. Connect
the digital audio output connection on the
DTV receiver to the appropriate digital input
on the back of the digital A/V receiver (as
shown in table 1).
Special Setups: TV
Menu selection for A/V connections, page 32.
•TV Speakers: OFF
•Audio Output: Fixed
•TV Inputs Appropriately Named: See Assign
Input Menu, page 33.
A/V Receiver: Connect as directed on
page 18, with two additions. Use a S-Video
cable in step 1 if you have a S-Video VCR.
The TV outputs should be connected to the
A/V receivers input marked TV.
Remote Control, pages 26-27.
•Set the slide switch to the TV position and follow
the programming instructions using the A/V
receiver code appropriate for your A/V receiver,
page 27 ( gur e5) .
The products listed at the top of this column connect to the below listed
inputs on the back of the appropriate A/V receiver.
Brand
Model
SAT/DBS/DTV
DVD
TV / Cable
VCR
Mitsubishi
Mitsubsihi
Denon
JVC
Kenwood
Onkyo
Pioneer
Sony
Yamaha
M-VR1000 / M-VR800
M-VR900 / M-VR700
AVR2800
RX-888V
VR-2080
TX-DS575
VSX-21
STR-DE825
RX-V2095
VCR2
CABLE/DBS
VCR2
VIDEO 2
LD
VIDEO 2
VIDEO 2
VIDEO 2
VCR 2
VCR1
VCR
VCR1
VCR 1
VIDEO 1
VIDEO 1
VCR 1
VIDEO 1
VCR1
DVD
DVD
DVD/LD
DVD
DVD
DVD
DVD/LD
DVD/LD
DVD/LD
TV
TV
TV/DBS
TV
AV AUX
VIDEO 3
TV/SAT
TV/DBS
TV/DBS
Table 1. A/V receiver back panel input table
15
Part II: Installation
Connecting an Antenna, Wall Outlet Cable, or Cable Box
UHF Antenna
(Channels 14-69)
VHF Antenna
(Channels 2-13)
Separate UHF and VHF Antennas
(Figure 1)
Flat Twin Lead
Flat Twin Lead
TV back panel
External
Antenna
or Cable
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
1
Connect the UHF and VHF antenna
leads to the UHF/VHF combiner.
Y
G
INPUT
OUTPUT
MONITOR PIP
STB
1
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
2
Push the combiner onto ANT-A on the
TV back panel.
UHF/VHF combiners are not provided
with the TV. They should be available at
most electronic stores.
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
300 Ohm to
75 Ohm
Combiner
UHF
AUDIO-
RIGHT
AUDIO-
RIGHT
ANT-A
LOOP OUT
ANT-B
2
IR EMITTER HOME THEATER
VHF
Side
Back
1
Figure 1. Connecting separate UHF and VHF antennas.
Twin Lead Antenna, Coaxial Lead
Antenna, or Wall Outlet Cable
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
300 Ohm Flat
Twin Lead
75 Ohm
Coaxial Cable
Pb
B
For antenna with twin at leads (Fi gur e2)
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
1
Connect the 300ohm twin leads to the
transformer.
Push the 75ohm side of the transformer
onto ANT-A on the TV back panel.
AUDIO-
RIGHT
AUDIO-
RIGHT
3
2
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
2
1
Optional 300 Ohm to 75 Ohm
Matching Transformer
Figure 2. Connecting twin lead antenna, coaxial lead
antenna, or wall outlet cable.
300ohm to 75ohm matching transform-
ers are not provided with the TV. They
should be available at most electronic
stores.
For cable or antenna with coaxial lead (Figure 2)
Additional connection cables are not
provided with the TV. They should be
available at most electronic stores.
3
Connect the incoming cable to ANT-A on
the TV back panel.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
Cable Box
Pr
R
H
S-VIDEO
VIDEO
Pb
B
(Figure 3)
V
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
AUDIO-
RIGHT
Incoming
Cable
1
Connect the incoming cable to ANT-A on
ANT-A
LOOP OUT
ANT-B
1
IR EMITTER HOME THEATER
the TV back panel.
Connect two coaxial cables as follows:
One from LOOP-OUT on the TV back panel to
2
2
IN on the cable box back panel.
3
3
One from OUT on the cable box back panel to
ANT-B on the TV back panel.
Cable Box
back panel section
OUT
IN
Figure 3. Connecting the cable box.
16
Part II: Installation
Connecting a VCR
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
(YPrPb)
2 (YPrPb)
DTV (YPrPb/GRBHV)
480i/480p/1080i
Antennas or Wall Outlet Cable
VGA
640X480, 60HZ
1
Y
G
INPUT
1
OUTPUT
MONITOR PIP
(Figure 1)
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
1
Connect the incoming cable to ANT-A on
AUDIO-
RIGHT
AUDIO-
RIGHT
the TV back panel.
ANT-A
LOOP OUT
ANT-B
Incoming Cable
1
IR EMITTER HOMTHEATER
Connect two coaxial cables as follows:
One from LOOP-OUT on the TV back panel to
ANTENNA IN on the VCR back panel.
One from VCR back panel ANTENNA OUT to
ANT-B on the TV back panel.
2
3
2
VCR back panel
2
3
AUDIO IN
VIDEO OUT
(Y/C)
AUDIO OUT
L
IN
L
1
2
1
Antenna
MONITOR
R
R
4
3
Now complete gur e3, steps 1-2.
OUT
Figure 1. Connecting VCR with antennas or wall outlet
cable.
Cable Box
(Figure 2)
1
Connect the incoming cable to ANT-A on
Additional connection cables are not
provided with the TV. They should be
available at most electronic stores.
the TV back panel.
Connect three coaxial cables as follows:
One from LOOP-OUT on the TV back panel to
IN on the back of the cable box.
One from OUT on the back of the cable box to
ANTENNA IN on the VCR back panel.
One from ANTENNA OUT on the VCR back
panel to ANT-B on the TV back panel.
2
3
4
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
AUDIO-
RIGHT
5
Now complete gur e3, steps 1-2.
ANT-A
LOOP OUT
ANT-B
Incoming Cable
1
IR EMITTER HOME THEATER
2
4
Composite Video with Audio or
Cable Box
Rear Terminals
S-Video with Audio
2
OUT
IN
(Figure 3)
3
VCR back panel
1
Connect a video cable from VIDEO
OUT on the VCR back panel to VIDEO
INPUT-1, INPUT-2 or INPUT-3 on the TV
3
AUDIO IN
VIDEO OUT
(Y/C)
AUDIO OUT
L
IN
L
1
MONITOR
2
1
Antenna
R
R
4
OUT
back panel.
If you have a S-VHS VCR, follow the same
steps using the S-Video terminals on the VCR
and TV (in place of the composite terminals).
Figure 2. Connecting VCR with cable box.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
2
Connect a set of audio cables from
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
AUDIO OUT on the VCR back panel to
AUDIO INPUT-1, INPUT-2, or INPUT-3
on the TV back panel. The red cable
connects to the R (right) channel and
the white cable connects to the L (left)
channel. If your VCR is mono (non-ste-
reo), connect only the white (left) cable.
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
White
Red
1
2
AUDIO-
RIGHT
AUDIO-
RIGHT
Attach
only
one
cable
type
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
1
1
Attach
only
AUDIO IN
L
VIDEO OUT
(Y/C)
one
cable
type
AUDIO OUT
L
IN
White
1
2
1
Antea
MONITOR
1
2
Red
R
R
VCR back panel
If your VCR has a video
channel or RF ON/OFF
switch, set to OFF.
OUT
Figure 3. Connecting the VCR Audio/Video.
17
Part II: Installation
Connecting an Audio Receiver
TV back panel
Stereo Audio System
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
(Figure 1)
Y
G
INPUT
OUTPUT
MONITOR PIP
STB
1
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
White
1
Connect the audio cables from AUDIO
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
AUDIO-
RIGHT
MONITOR OUTPUT on the TV back
panel to TV IN or AUX IN terminals on
the back of the audio system. The red
cable connects to the R (right) channel,
and the white cable connects to the L
(left) channel.
Red
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
1
Audio system back panel section
CD
IN
TAPE
2
OUT
AUX
IN
TAPE
1
OUT
IN
IN
SUBWOOFER
OUT
(MONO)
White
Red
L
R
Figure 1. Connecting the Stereo Audio System
2
Turn off the TV’s speakers through the
Audio/Video Menu, page 43.
3
Set the audio system’s input to the TV
or AUX position to hear the TV’s audio
through your stereo system.
Additional connection cables are not
provided with the TV. They should be
available at most electronic stores.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
White
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
White
Red
1
Attach
only
AUDIO-
RIGHT
AUDIO-
RIGHT
one
cable
type
Red
ANT-A
LOOP OUT
ANT-B
A/V Receiver
1
3
2
IR EMITTER HOME THEATER
(Figure 2)
W
h
i
AV Receiver (M-VR900)
Back panel section
R
e
d
t
e
1
Connect a video cable or S-Video
cable from VIDEO MONITOR OUT on
the back of the A/V receiver to VIDEO
INPUT-1 on the TV back panel.
2
Connect a video cable from VIDEO
MONITOR OUTPUT on the TV back
panel to VIDEO TV IN on the back of
the A/V receiver.
Figure 2. Connecting the A/V Receiver.
3
Connect a set of audio cables from
AUDIO MONITOR OUTPUT on the TV
back panel to AUDIO TV IN on the back
of the A/V receiver. The red cable con-
nects to the R (right) channel, and the
white cable connects to the L (left) chan-
nel.
Please see your A/V receiver Owner’s
Guide for more detailed connections.
18
Part II: Installation
Do not display the same stationary images on the screen for more that 15%
of your total TV viewing in one week. Examples of stationary images are
WARNING:
letterbox top/bottom bars from DVD or other video sources, side bars when showing standard
TV pictures on widescreen TV’s, stock market reports, video game patterns, station logos, web
sites, or stationary computer images. Such patterns can unevenly age the picture tubes causing
permanent damage to the TV. Please see pages 23 and 58 for a detailed explanation.
Connecting a DVD Player
TV back panel
HIGH RESOLUTION INPUT
DVD Player with Component Video
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
(Figure 1)
INPUT
1
OUTPUT
MONITOR PIP
1
STB
2
3
Pr
R
H
V
2
3
Pb
B
AUDIO-
AUDIO-
LEFT/
(MONO)
Connect the Component Video cables
5
4
White
Red
AU-
AUDIO-
RIGHT
from Y/Cr/Cb or Y/Pr/Pb VIDEO OUT
on the back of the DVD player to COM-
PONENT-1 or COMPONENT-2 on the
TV back panel, matching the correct
components:
Y to Y
Cr or Pr to Pr
Cb or Pb to Pb
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
DVD back panel
AUDIOOUT
5.1 CH SURROUND 2CH
AC IN
VIDEO
Y
MITSUBISHI
BITSTREAM/PCM
1
2
3
DVD PLAYER
MODEL
CENTER
DD-5000
White
Red
POWER SUPPLY
POWER CONSUMPTION
SERIAL NO.
120V~ 60Hz
20W
CB
L
5
S
MANUFACTURE
D
CR
DISTRIBUTED BY
MITSUBISHI DIGITAL ELECTRONICS
AMERICA, INC.
9351 JERONIMO ROAD
IRVINE, CA 92618
R
4
SUBWOOFER SURROUND
FRONT
COAXIAL OPTICAL
VIDEOOUT
MADE IN JAPAN
1
2
3
Figure 1. Connecting the DVD player.
Connect a set of audio cables from
AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO Input 1
or 2 on the TV back panel. The red
See Appendix B, page 61, for component
video signal compatibility information.
4
cable connects to the R (right) chan-
For digital audio connections, see your
DVD and A/V receiver Owner’s Guides.
5
nel, and the white cable connects to
the L (left) channel.
Connecting an S-Video Device
S-Video Device
(Figure 2)
1
Connect an S-Video cable from VIDEO
OUT on the device back panel to VIDEO
INPUT-1, INPUT-2, INPUT-3, or STB on
the TV back panel.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
1
OUTPUT
MONITOR PIP
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
1
Pb
B
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
White
Red
2
Connect a set of audio cables from
2
AUDIO-
RIGHT
AUDIO-
RIGHT
AUDIO OUT on the device back panel
to AUDIO INPUT-1, INPUT-2, INPUT-3,
or STB on the TV back panel. The
red cable connects to the R (right) chan-
nel and the white cable connects to
the L (left) channel. If your device
is mono (non-stereo), connect only the
white (left) cable.
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
Any S-Video Device
AUDIO IN
L
VIDEO OUT
(Y/C)
AUDIO OUT
L
White
1
2
1
2
Red
R
R
Figure 2. Connecting an S-Video Device.
19
Part II: Installation
Connecting a DTV Receiver
DTV Connectors and Adaptors
(Figure 1)
The TV back panel has 5 RCA-type connec-
tors, for the DTV connection. The back
panel of your DTV receiver may use RCA-
type connectors or BNC-type connectors. If
your DTV receiver comes with BNC type
connections, you will need to purchase BNC
to RCA adaptors to connect the TV to the
DTV receiver. These adaptors should be
available at most electronic supply stores.
or
Adaptor
Fitted to
Connection
BNC to
RCA
Adaptor Connector
RCA
Connector
BNC
Figure 1. DTV connectors and adaptors.
DTV Receiver with Component
Video Connections
(Figure 2)
1
Connect the outside antenna, cable, or
satellite to ANT, or SATELLITE IN on the
DTV receiver (see your DTV receiver’s
owner’s guide for instructions, and cable
compatibility).
See Appendix B, page 61, for compo-
nent video signal compatibility informa-
tion.
For digital audio connections, see your
DTV receiver and A/V receiver Owner’s
Guides.
2
Connect the incoming terrestrial antenna,
or cable (not satellite) to ANT-A on the
TV back panel (a coaxial splitter, avail-
able at most electronic supply stores,
may be required to complete this instal-
lation).
TV back panel
3
Connect the RCA-type cables from the
Y/Pr/Pb outputs on the DTV receiver to
HIGH RESOLUTION INPUT Y/Pr/Pb on
the TV back panel. You may need to set
the DTV input assignment to YPrPb in
the Assign Input menu, page 33.
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
INPUT
1
OUTPUT
MONITOR PIP
G
3
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
3
3
Pb
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
White
Red
4
4
AUDIO-
RIGHT
AUDIO-
RIGHT
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
2
4
Connect the L (left) and R (right) audio
cables from the DTV receiver to DTV
AUDIO on the TV back panel.
Incoming Antenna,
or Cable.
2
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
AUDIO
AUDIO
V
L
L
Y
4
3
3
CONL
OUT TOTV
To utilize the bene tsof a digi tal A/V
receiver, connect your DTV receiver’s
digital audio out to a digital input on your
digital A/V receiver.
CH
CH
3
4
P
r
R
R
4
DIGITAL
AUDIO OUT
RF
P
b
3
PHONE JACK
REMOTE
VIDEO
VIDEO
S-VIDEO
IN FROM ANT
SATELLITE IN
Figure 2. Connecting the DTV receiver with component
video connections.
20
Part II: Installation
Connecting a DTV Receiver
DTV Receiver with RGB Video
Connections
(Figure 1)
1
Connect the outside antenna, cable, or
satellite to ANT, or SATELLITE IN on the
DTV receiver (see your DTV receiver’s
owner’s guide for instructions, and cable
compatibility).
See Appendix B, page 61, for RGB video
signal compatibility information.
For digital audio connections, see your
DTV receiver and A/V receiver Owner’s
Guides.
2
Connect the incoming terrestrial antenna,
or cable (not satellite) to ANT-A on the
TV back panel (a coaxial splitter, avail-
able at most electronic supply stores,
may be required to complete this instal-
lation).
Connect the RGB cables from the
DTV receiver to the HIGH RESOLU-
TION INPUT GRBHV on the TV back
panel. You may need to set the DTV
input assignment to RGB in the Assign
Input menu, page 33.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
VGA
480i/480p/1080i
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
INPUT
1
OUTPUT
MONITOR PIP
3
STB
2
3
Pr
R
H
V
S-VIDEO
VIDEO
4
5
6
7
Pb
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
White
Red
8
8
AUDIO-
RIGHT
AUDIO-
RIGHT
DTV Receiver
G (green)
TV Back Panel
Y/G
ANT-A
LOOP OUT
ANT-B
3
4
5
=
=
=
IR EMITTER HOME THEATER
R (red)
Pr/R
2
B (blue)
Pb/B
Incoming Antenna,
or Cable.
2
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
If the DTV receiver has outputs for H
and V sync, connect as listed below
(DO NOT connect if DTV receiver uses
“Sync on Green”):
AUDIO
VC
8
CONL
L
G
R
3
4
OUT TOTV
CH
CH
3
4
R
8
DIGITAL
AUDIO OUT
RF
H
6
7
B
5
V
PHONE JACK
REMOTE
S-VIDEO
IN FROM ANT
SATELLITE IN
Figure 1. Connecting the DTV receiver with RGB video
connections.
6
7
H (horizontal sync) =
H
V
V (vertical sync)
=
8
Connect the L (left) and R (right) audio
cables from the DTV receiver and to
DTV AUDIO on the TV back panel.
To utilize the bene tsof a digi tal A/V
receiver, connect your DTV receiver’s
digital audio out to a digital input on your
digital A/V receiver.
21
Part II: Installation
Connecting a Computer with a VGA Monitor Output
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i /480p
Connecting a Computer
DTV (YPrPb/GRBHV)
480i /480p /1080i
VGA
640X480, 60HZ
1
(YPrPb)
2
(YPrPb)
Y
G
(Figure 1)
INPUT
OUTPU
MONIT
STB
1
2
3
Pr
R
H
V
S-O
1
Pb
B
VIDEO
AUDIO-
L
AUDIO-
LEFT/
1
Connect VGA Monitor Out from the com-
(M)
(MONO)
White
Red
2
A
AUDIO-
RIGHT
R
2
puter to VGA on the TV back panel
using a VGA compatible monitor cable.
See Appendix B, page 61, for VGA
signal compatability.
ANT-A
LOOP OUT
ANT-B
IR EMITTER HOME THEATER
C A B L E
G V A M O N I
R O T
Computer with VGA Monitor Output.
1
AUDIO
L
2
VGA OUTPUT
R
2
2
Connect the L (left) and R (right)
audio cables from the computer to VGA
AUDIO on the TV back panel. In cases
where your computer’s audio output is a
single mini-RCA jack, a spliter is needed
to complete this connection.
To utilize the bene tsof a digi tal A/V
receiver, connect your computer’s digital
audio out, if available, to a digital input
on your digital A/V receiver.
Figure 1. Connecting a computer with a VGA monitor
output.
Connecting the System 4 Home Theater IR Control
(Figure 1)
1
Connect the IR emitter to IR EMITTER
HOME THEATER on the TV back panel.
2
Place the IR emitter cable under or
along the side of the A/V device. Place
the IR lens directly in front of the A/V
device’s infrared signal receiver. Infra-
red signal receivers are usually behind
the front translucent panel of the device.
Place unused transmitters in an out-of-
the-way location.
TV back panel
HIGH RESOLUTION INPUT
COMPONENT 480i/480p
DTV (YPrPb/GRBHV)
480i/480p/1080i
VGA
640X480, 60HZ
1
(YPrPb)
2 (YPrPb)
Y
G
INPUT
OUTPUT
MONITOR PIP
STB
1
2
3
Pr
R
H
V
S-VIDEO
VIDEO
Pb
B
3
AUDIO-
LEFT/
(MONO)
AUDIO-
LEFT/
(MONO)
AUDIO-
RIGHT
AUDIO-
RIGHT
ANT-A
LOOP OUT
ANT-B
4
For permanent installation of the IR
emitter cable, use the included adhesive
tape to secure the bottom of the emitter
to the anchoring object of your choice.
IR EMITTER HOME THEATER
1
Other A/V Device
A/V Receiver
S
S
CH
CH
D
S
I
G
I
T
A
L
D
S
I
G
I
T
A
L
U
R
R
O
U
N
D
U
R
R
O
U
N
D
See page 53 for details on using the
TV’s IR emitter to control a Mitsubishi
A/V receiver.
Figure 2. Connecting the System 4 Home Theater IR
Control.
22
Part II: Installation
Warning: Do not leave stationary, toolbar, or partial images on-screen
for extended periods of time. Mix the types of pictures shown.
Uneven picture tube aging is NOT covered by your warranty.
The VGA capability of this television is
designed for occasional use ONLY.
We recommend that screen saver acti-
vation time be set to less than ve
minutes and that when using a device
through the VGA port, you use lower
brightness and contrast settings. If
your computer programs allow, tool-
bars should be set to hidden mode.
It is not meant to be used as a work station
or to view static or odd-shaped images for
an extended period of time. Any device
connected to your television via the VGA
port, including, but not limited to, personal
computer, game system, or digital set-top
box, must have its screen saver function
activated to prevent damage to the televi-
Please remember that most computer pro-
grams and video game systems display
static images, such as boxes, buttons, tool
sion. We DO NOT recommend the use of bars, and games scores that can damage
any external device that does not have a
screen saver function with this television.
the television if used for extended periods
of time, repeatedly, or frequently. The VGA
Input will automatically select the “Stan-
dard” screen format and ll the screen.
No other formats are available with the
VGA Input. Standard television overscan
is used, so VGA images will be cropped
on all sides. Resizing of some displays
may be required. Consult your owner’s
manual for computers, computer programs
and game systems for assistance with
resizing display images. Please see page
58 for an explaination of uneven picture
aging.
23
e’re proud of the many advances
in digital television, in which we
have played a major role. Digital
W
broadcasting brings flawless pictures and
sound. At its highest performence level,
high definition television (HDTV) delivers
images up to six times more detailed than
standard analog television.
Setup
Programming the Remote Control:
To Control Other A/V Products ....... 26-27
To Activate the System 4 IR
Home Therater IR Control .............. 28-29
on-screen menu system.....30
Using
...............................30
Menu Screens (Overview)....31-32
Setup Menu..............................33
Memorize Channels ..............33
Assign Input ..........................33
Language...............................33
Closed Captions Menu ...........34
Channel Menu .........................35
V-Chip Lock ....................... 36-38
Advanced Menu.......................39
Timer ......................................39
Convergence ................... 40-41
Audio/Video Menu ............ 42-43
Clock Menu........................ 44-45
A/V Setting Descriptions.. 46-47
25
Part III: Setup
Programming the Remote Control: To Control Other A/V Products
To Program the Remote to Control
Other Brands of Audio and Video
VCR
POWER
Products:
CABLE/DBS/DTV
TV
DVD
AUDIO
(Figures 1-5)
2
1
1
Move the slide switch at the top of
the remote to the product you want to
control.
Press and hold the POWER button on
the remote control.
Enter the rst thr ee di gi t code li st ed for
your equipment, and then release the
POWER button on the remote control.
3
Satellite Receiver Codes
Satellite brand
Code to enter:
If your
satellite
receiver
code is not
listed here,
please see
page 62
for a
Mitsubishi DTV - DBS 173
Dishnetwork
Hughes - DSS
RCA - DSS
175
173
176
177
170
174
178
2
Sony - DSS
3
Toshiba - DSS
Panasonic - DSS
Primestar
complete
listing.
To reset to default code, enter 000
Figure 2. Programming the remote to control your satel-
lite receiver.
4
Point the remote control at the equip-
ment and press the POWER button.
If the equipment responds, the remote
control is properly programmed to oper-
ate the equipment. If the equipment
does not respond, repeat steps 2-4 with
the next three digit code listed in step 3
for your equipment.
VCR
POWER
CABLE/DBS/DTV
TV
DVD
AUDIO
2
1
3
VCR Codes
VCR brand
Code to enter:
001, 002
If your
VCR
Mitsubishi
Hitachi
JVC
Phillips / Magnivox
Panasonic
RCA
VCR
POWER
CABLE/DBS/DTV
TV
DVD
AUDIO
code is not
listed here,
please see
page 62
for a
complete
listing.
020, 043, 065
030, 054, 059
043, 044, 051
041, 042, 043
020, 053, 065
048, 049, 050
021, 066
2
1
3
Cable Box Codes
Sony
Toshiba
Cable box brand
Code to enter:
If your
cable box
code is not
listed here,
please see
page 62
for a
General Instruments 111, 119, 120, 121, 122,
To reset to default code, enter 000
Jerrold
Oak
Pioneer
Scientific Atlanta
Zenith
123, 124, 125, 126, 127
102, 137, 139
101, 116
111, 112, 113
100, 117
Figure 3. Programming the remote to control your VCR.
complete
listing.
To reset to default code, enter 000
Figure 1. Programming the remote to control your cable
box.
When set to TV, the PLAY, STOP, REW/
REV, and FF/FWD buttons will operate
the VCR after a VCR code has been
properly programmed into the remote
control.
If you cannot turn the cable box ON
by pressing POWER, try pressing CHAN-
NEL or the number buttons.
26
Part III: Setup
Programming the Remote Control: To Control Other A/V Products
After entering the correct codes in each posi-
tion of the remote control, use the slide
switch to select which product will respond
when an operational button is pressed. If
you enter a code from the AUDIO chart
while the slide switch is set to TV, the
volume and mute functions change to match
the A/V receiver. This is useful when using
an A/V receiver with the TV all the time.
In all other cases, only one of the below
devices is allowed for each slide switch posi-
tion.
VCR
POWER
CABLE/DBS/DTV
TV
DVD
AUDIO
2
1
3
DVD/LDP Player Codes
DVD/LDP brand
Code to enter:
003
016, 017
250
If your
DVD
Mitsubishi (DVD)
Mitsubishi (LDP)
Panasonic
code is not
listed here,
please see
page 62
for a
complete
listing.
Pioneer DVD (LDP) 252 (016, 017)
Sony
Toshiba
254
253
To reset to default code, enter 000
Figure 4. Programming the remote to control your DVD/
LDP.
TV position:
TV
A/V receiver (volume and mute only)
Cable/DBS/DTV position:
Cable box
Satellite receiver
DTV receiver
VCR
POWER
CABLE/DBS/DTV
TV
DVD
AUDIO
VCR position:
2
VCR
1
DVD position:
DVD
3
A/V Receiver Codes
Audio brand
Code to enter:
If your
audio
Mitsubishi A/V receiver Set M-VR1000 or M-VR800 to 015
LD Player
code is not
listed here,
please see
page 62
for a
complete
listing.
and/or CD player
Denon
Kenwood
JVC
Onkyo
Pioneer
Sony
Set M-VR900 or M-VR700 to 010
234, 235, 236
200, 208
232, 233
209, 214
205, 207
222
201, 202
Audio position:
A/V receiver
Mitsubishi CD player [If you have a Mitsubishi A/V
receiver, the audio position may be used in conjunction with
select Mitsubishi CD players. Your audio position must be
programmed to either 010 or 011. Plug the CD player power
cord into a switched outlet on the back of your A/V receiver.
Pressing the POWER button will then turn on your A/V receiver,
in turn, turning on your CD player. On select CD players, the
transport controls (FF, Play, Rew, etc.) in the audio position will
operate the CD player.]
Yamaha
To reset to default code, enter 000
Figure 5. Programming the remote to control your A/V
receiver.
Some manufacturers may change their
products, or they may use more than
one remote control system. If this is the
case, your remote control may not be
able to operate your VCR, DVD, cable
box, satellite receiver, or A/V receiver.
If the slide switch is set to TV when
you enter an A/V receiver code, VOLUME
and MUTE will control the A/V receiver
rather than the TV. To return volume
and mute control to the TV, set the slide
switch to TV, press and hold POWER
and enter 000.
27
Part III: Setup
Programming the Remote Control:
To Activate the System 4 Home Theater IR Control
Activation of the System 4 Home
Theater IR Control
For select brands of digital A/V receiver’s,
you can set up the remote control to auto-
matically select the correct audio input when
you press the HOME THEATER button. At
the same time, the TV will select the correct
video input. This allows you to watch your
best type of video (Component, S-Video)
with your best type of audio (Dolby Digital,
Pro Logic, etc.) conveniently. See System
4 Home Theater IR Control, page 22, for
connection instructions.
To Activate the Audio Portion:
(Figure 1)
1
Press and hold the HOME THEATER
button.
2
Press and release the AUDIO button.
3
Name the TV input as instructed.
HOME
THEATER
1
2 AUDIO
3
Name TV Input as Shown Below(see pg 33 for naming help)
Device You Are Using
Name Input
Cannot be named
CABLE
Cable Box connected to ANT-A or ANT-B
Cable Box connected to STB
Satellite Receiver connected to any input
Digital TV/Satellite Receiver connected to DTV
VCR connected to input 1, 2, 3, or 4
DVD connected to any input but DTV
DBS
Cannot be named
VCR
Once properly activated, when the HOME
THEATER button is pressed, System 4 Oper-
ates In 2 Parts:
DVD
Figure 1. Activating the audio portion of System 4 for the
CABLE/DBS/DTV layer.
AUDIO
Changes a compatible digital A/V
receiver to the correct input for the device
you wish to operate.
VIDEO
Changes the TV to the correct input
To Activate the Video Portion:
for the device you wish to operate.
1
Press and hold the HOME THEATER
button.
Both functions can operate simultaneously
with one touch of the HOME THEATER
button. However, you may activate only one
if you desire (video to control the TV or
audio to control the A/V Receiver). The
remote control must be programmed to the
appropriate A/V Receiver code prior to the
activation of the audio portion (see To Pro-
gram the Remote to Control Other Brands of
Audio and Video Products, page 26).
2
Press and release the VIDEO button.
28
Part III: Setup
Programming the Remote Control:
To Activate the System 4 Home Theater IR Control
Testing System 4 for Proper Setup
VIDEO
If the TV did not change inputs...
1
1
Move the slide switch to the position you
Repeat To Activate the Video Portion, page 28,
and retest.
wish to test.
2
Point the remote at the TV.
Deactivating the System 4 Home
Theater IR Control
3
Press and release the HOME THEATER
button. If the audio portion has been
properly setup, your A/V receiver will
have changed to the appropriate input
as indicated in table 1, page 15. If the
video connection of your System 4 has
been properly setup, your TV will have
changed to the appropriate input.
1
Simultaneously press the CANCEL
button and the HOME THEATER button.
2
Repeat To Activate the Video Portion,
page 28.
AUDIO
If the A/V Receiver did not change
inputs...
1
2
3
Repeat Special Setups, page 15, and retest.
Reposition IR emitter(s) and retest
Repeat To Activate the Audio Portion, page 28,
and retest.
If your A/V receiver is still not responding
to the commands from your remote control,
you may have an incompatible A/V receiver.
Proceed to Deactivating the System 4 Home
Theater IR Control, on this page.
System 4 is designed for use with A/V receiv-
ers that have at least 4 inputs. A/V receivers
with fewer may be only partially compatible.
AUDIO
If the A/V Receiver changed to
an input other than the one indicated in
table 1, page 15...
1
Connect the audio output from your A/V
device to the A/V receiver input that your A/V
receiver DID change to, and retest.
29
Part III: Setup
The 3D Graphical
Menu System
Your TV has Mitsubishi’s exclusive 3D Graph-
ical on-screen operating system,
which provides on-screen information for
menu choices and changes (Figure 1).
A picture (icon) will be highlighted
when selected with the ADJUST
arrows. When selected, the appro-
priate menu will appear. You may
then make changes within the menu
or access sub-menus, if available.
Figure 1. Main Menu: The Main Menu screen will always
be the rst scr een t hat appear swhen you pr ess t he
MENU button.
A button indicates that you will access a
sub-menu or start an automatic function by
making this selection.
The
system includes the following
special features:
VCR
CABLE/DBS/DTV
TV
DVD
AUDIO
The currently selected icon or button is high-
lighted with a yellow outline and the text color
will be yellow.
On-screen instructions provide complete menu
choice information.
Some on-screen menu options must be set
before other options are available. For exam-
ple, “Set the Timer” will only be possible if
“Clock Time” and “Set Day” have been set.
POWER
2
5
8
0
3
1
4
6
HOME
THEATER
7
9
SLEEP
VIDEO
SQV
QV
INPUT CHANNEL VOLUME
AUDIO
MUTE
HOME
3
ENTER
6
The following buttons on your remote control
will help you to navigate within the
system (Figure 2):
1
2
EXCH
ADJUST
CANCEL
MENU
INFO
5
PIP CH
V-CHIP PIPINPUT
GUIDE
PAUSE
FORMAT PIP/POP
4
1
ADJUST to select the menu item you want
to change.
REC
STOP
2
3
ADJUST or to change the settings.
ENTER to enter into a menu, start an auto-
matic function, or select a checkbox.
CANCEL to clear a setting, or stop an auto-
matic function.
MENU to move back one menu screen at a
time.
HOME to exit all menus and return to TV
viewing.
REW/REV
PLAY
FF/FWD
4
5
6
Figure 2. These buttons are used for navigation within
the on-screen operating system.
30
Part III: Setup
Menu Screens (Overview)
Setup Menu
(Figure 1)
You can put channels in memory, turn on or
off input connections of the TV, and select
the menu system to display in English or
Español (Spanish).
Figure 1. Setup menu
Captions Menu
(Figure 2)
Display captions or text, and choose black or
gray as the background color for the closed
caption area.
Figure 2. Captions menu
Channel Menu
(Figure 3)
Use to customize the channel information for
Ant-A and Ant-B. Manually add or delete
channels from memory, name channels for
Ant-A and Ant-B, or add your favorite chan-
nels to a SQV (Super Quick View™) list.
Figure 3. Channel menu
31
Part III: Setup
Menu Screens (Overview)
V-Chip Lock Menu
(Figure 1)
Block or allow programing based upon
rating signals sent by the broadcast station,
or by time.
Figure 1. V-Chip Lock menu
Advanced Menu
(Figure 2)
Set your TV to turn on automatically, con-
verge (align) the three main colors, display
a blue screen when viewing an input with
no signal, enhance the darker parts of
bright pictures, and change the line doubling
method.
Figure 2. Advanced menu
Audio/Video Menu
(Figure 3)
A/V Reset on the menu allows you to return
the A/V settings for the current input to the
factory presets. A/V Reset on the front
panel resets all inputs at one time. You
can also adjust some or all of the A/V set-
tings, (each input can be set to your prefer-
ences), turn the TV speakers on or off, and
choose how you want to control the TVs
audio output.
Figure 3. Audio/Video menu
Clock Menu
(Figure 4)
Manually set the time for the TV, or select
Auto and the TV will automaticaly set the
time based upon Extended Data Service
(XDS) time data. This time data is usually
broadcast by your local PBS station.
Figure 4. Clock menu
32
Part III: Setup
Setup Menu: Memorize Channels, Assign Input, and Language
Memorize Channels
(Figure 1)
This selection memorizes the channels your
TV can receive and skips the unused or
weak channels. You can stop memorization
at any time by pressing CANCEL. Channels
memorized prior to pressing CANCEL will
stay in memory. After channels are memo-
rized, you may select memorized channels
in ascending or descending order by press-
ing the CHANNEL button on the remote con-
trol.
Figure 1. Memorize Channels
DTV Note: If you have a DTV receiver
connected, you will need to use that
receiver’s channel memorization system
to memorize digital channels.
Assign Input Menu
(Figure 2)
Assign Input turns off unused inputs, turns
them on again, or changes the name of the
input. If you turn an input Off, it will be
skipped when you press the INPUT button
on the remote control. Your choices are:
Ant-A, and Ant-B: On or Off.
Figure 2. Assign Input menu
DTV: YPrPb, RGB, or Off.
Input: Cycle through the available inputs
(Inputs 1-4, Component inputs 1-2, STB, and VGA).
Status: Turn the selected input On or Off.
Name: Name the selected input
(VGA input cannot be named).
Language
(Figure 3)
Display the on-screen menus in either
English or Spanish (Español). The rst
time your TV was powered on, you were
requested to select an on-screen menu lan-
guage. You may change your selection by
pressing the ADJUST or button on the
remote control.
Figure 3. Language
33
Part III: Setup
Captions Menu: Closed Captions
Captions Menu
(Figure 1)
Broadcasters can send either Standard or
Text closed captioning. Standard closed
captioning follows the dialogue of the char-
acters on-screen and displays in a small sec-
tion of the screen. Text closed captioning
often contains information such as weather
or news and covers a large portion of the
on-screen program. Your TV can decode
four different standard and four different text
closed captioning signals from each TV sta-
tion. However, each TV station may broad-
cast only one or two closed captioning
signals, or none at all.
Figure 1. Captions menu
Within the Captions menu, you can turn on
or off the closed caption decoder, select the
type of captions or text, and choose black or
translucent gray as the background color for
the closed caption area.
When Text closed captioning is selected,
a large black or gray box will appear on
your TV screen if no signal is broadcast.
Closed Captions
(Figure 1)
The TV can display one of the following:
The content of captions is determined by
the broadcaster. If your captions show
strange characters, misspellings, or odd
grammar, it is not a malfunction of the
TV.
CC1, CC2, CC3, or CC4: Standard
closed captioning signals.
Text1, Text2, Text3, or Text4: Text closed
captioning signals.
On if mute: Closed captions when mute.
When selected, the standard closed cap-
tioning signal (CC1) will turn on/off by press-
ing the MUTE button on the TV remote
control.
Off: No closed captions.
CC Background
(Figure 1)
To make the closed captions easier to read,
you can choose to display the background
color as either black or translucent gray.
34
Part III: Setup
Channel Menu: Antenna, Channel, Memory, Name, and SQV™
SQV (Super Quick View™)
Using The Menu Screen
(Figure 1)
SQV (Super Quick View™) allows you to put
together a list of your favorite channels from Ant-A
and Ant-B. You can store up to 6 channels in
each of the 9 different memory banks. Once you
have added a channel to the SQV memory, “SQV”
will appear under the channel number on the TV
screen.
Figure 1. Channel menu
SQV (Super Quick View™)
Antenna
Using The Remote Control
(Figure 1)
Viewing and changing SQV banks using the
remote control:
Select Ant-A, or Ant-B. For each antenna,
you can add or delete channels in memory,
name channels, and add channels to the
SQV (Super Quick View™) list.
1
Press the SQV button.
2
To change memory banks, press a
number button within 5 seconds of
pressing the SQV button.
3
Press the SQV button repeatedly to
cycle through the channels available in
that bank.
Channel
(Figure 1)
Select the channel you want to add or delete
from memory, name, or add to the SQV
Super Quick View™ list.
Adding SQV channels using the remote con-
trol:
1
Use the CHANNEL or number buttons
to select the channel you want to add to
the current SQV memory bank.
Memory
(Figure 1)
2
Press and hold the SQV button for
about 3 seconds. When “SQV” and the
memory bank number appear under the
channel number, the channel has suc-
cessfully been added.
After all available channels have been mem-
orized with Memorize Channels, page 33,
weaker channels viewed with Ant-A or Ant-B
can be added and unwanted channels can
be deleted.
Removing SQV channels using the remote
control:
Use the CHANNEL button on the remote
control to view memorized channels.
1
Press the SQV button repeatedly until
you see the desired channel.
2
While the channel number and SQV indi-
Name
(Figure 1)
cator are still displayed on the screen,
press the CANCEL button. If the
CANCEL button is not pressed before
the SQV indicator disappears, the chan-
nel will not be removed.
Channels shown on Ant-A or Ant-B can be
given names (up to four characters). After
you enter a name, it will appear on the TV
screen, next to the channel number.
3
When the SQV indicator disappears, the
channel has successfully been removed.
35
Part III: Setup
V-Chip Menu: V-Chip Lock
V-Chip Lock
(Figure 1)
The V-Chip Lock allows you to Block or
Allow programs based upon rating signals
sent by the broadcasting station. The TV
comes from the factory with the V-Chip lock
in the Off setting. You can turn the lock
On within the V-Chip Menu. The factory
preset is TV-PG, allowing only programs
rated TV-PG or lower. You can change
the blocking level to various TV or movie rat-
ings, lettered categories, and by time. After
changing channels or inputs, there may be
up to a 5 second delay before the V-Chip
lock takes effect. The V-CHIP button on the
remote control enables you to conveniently
turn the lock on or off.
Figure 1. V-Chip Lock menu
Entry to the V-Chip Lock
(Figures 2 & 3)
The rst time you sel ect V- Chi pLock f rom
the MAIN menu, or after you have canceled
your passcode you will see the screen
shown in gur e2. Us e t he numb er but tons
on the remote control to input a four-digit
passcode, then press ENTER. You can
delete a character and move back one
space by pressing CANCEL. You can exit
without inputting a passcode by pressing
MENU or HOME. The next time you select
V-Chip Lock from the MAIN menu, you will
see a menu screen similar to the one in
gur e3.
Figure 2. V-Chip Lock passcode screen ( rst -time ent ry)
If you forget your four-digit passcode,
see Appendix A, page 59.
Figure 3. V-Chip Lock passcode screen (re-entry)
36
Part III: Setup
V-Chip Menu: V-ChipLock
Ant-A 002 KCBS
480i Standard
Stereo SAP
TV-PG DLSV
SQV1
V-Chip Signal Information
(Figure 1)
When provided by the broadcaster, V-Chip
signal information can be displayed by press-
ing the INFO button on the remote control.
Rating guidelines are provided by broadcast
stations. TV programs and made-for-TV
movies can be blocked by the TV Rating
and/or Categories signal. Made-for-theater
and direct-to-video movies can be blocked
by the Movie Rating signal.
Figure 1. V-Chip signal information.
If no V-Chip rating and/or category
signal is sent from the broadcaster, no
rating information will be displayed, and
the V-Chip Lock will not be able to block
the program or movie.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Ratings
Youth
7+ Years
General
Audience
Parental
Guidence
Mature
Audience
Youth
14+ Years
and Descriptions
Table 1. V-Chip rating information that may be included with TV programs and made-for-TV movies. If you set the
lock to TV-G; TV-Y, TV-Y7, and TV-G will be available, and TV-PG, TV-14, and TV-MA will be blocked.
FV
D
L
S
V
TV Categories
Program
Not Rated
Fantasy
Violence
Sexual
Dialog
Adult
Sexual
Violence
and Descriptions
Language Situations
Table 2. V-Chip category information that may be included with TV programs and made-for-TV movies. If you set the
category L to be blocked; all programing caring the L signal will be blocked (regardless of it’s TV rating).
OFF
G
PG
PG-13
R
NC-17
X
Movie Ratings
V-Chip is
off
General
Audience
Parental
Guidance
13+ Years Restricted 18+ Years
Adult
and Descriptions
Table 3. V-Chip rating information that may be included with made-for-theater and direct-to-video movies. If you set
the lock for PG-13; G, PG, and PG-13 will be available, and R, NC-17, and X will be blocked.
Video tapes, laser discs, and DVD’s may
not contain the special V-Chip rating sig-
nals. If this occurs, the V-Chip Lock
will not be able to block the program or
movie.
“Programs Not Rated” is a V-Chip
catagory that applies to broadcasted pro-
gramming such as news, weather, or
emergency programs. Please use care
when blocking this category.
37
Part III: Setup
V-Chip Menu: V-Chip Lock Hours/Time
V-Chip Lock Hours/Time
(Figure 1)
V-CHIP HOURS/LOCK BY TIME will allow
you to activate the V-Chip or lock the entire
TV during speci chour s.
V-Chip Start Time and V-Chip Stop
Time
(Figure 1)
Figure 1. V-Chip Hours/Lock by Time menu
Select the times you would like the V-Chip to
be Active. By setting the V-Chip Start Time
and V-Chip Stop Time to the same time, the
V-Chip will be active 24 hours a day.
Press or
to slowly adjust the time.
Press and hold or to quickly adjust the
time.
Lock by Time, Lock Time, and
Unlock Time
(Figure 1)
Lock by Time locks the entire TV based
upon the Lock Time and Unlock Time. You
must input your 4-digit passcode to use the
TV when it is locked. By setting the Lock
Time and Unlock Time to the same time, the
Lock by Time will be active 24 hours a day.
Passcode Screen
(Figure 2)
Channel 002 is locked.
V-Chip locked the program
because the rating is
TV-PG DLSV
To view a V-Chip blocked program or to
watch the TV during a scheduled lock time,
you must enter your 4-digit passcode. The
V-Chip block and Lock by Time will remain
disabled until the TV is powered off and then
on again.
To watch the program, enter
your passcode
- - - -
Use the NUMBER buttons,
then press ENTER
Figure 2. Passcode Screen
38
Part III: Setup
Advanced Menu: Timer
Timer
(Figure 1)
The timer will automatically turn the TV on
(if it is off) at the time you schedule and
select.
The TV’s clock must be set before you
can set the timer. If you have not set
the clock and/or day, you will see the
CLOCK menu instead of the Timer menu.
Figure 1. Timer selection in the Advanced menu
Figure 2. Timer menu
Timer Menu
Set Day
(Figure 2)
Select the days that the TV will turn on auto-
matically. You can select Everyday, Mon-Fri
(Monday through Friday), or the individual
days of the week.
The timer can be turned On or Off. When
On, you need to select the time to turn on,
the day to turn on, and the channel to dis-
play. At your preselected time, the timer
will turn the TV on, and a message will be
displayed, “Press a key for the TV to stay
on”. Any button on the remote control must
be pressed within 5 minutes, or the TV will
turn itself off.
Input
Select the input to use when the timer turns
on the TV. If the TV is already on, the timer
will turn the TV to this selected input.
Set Time
Select the hour and minute, including AM or
PM, when the TV is to turn on.
Channel
When Ant-A or Ant-B is the selected input,
you may select any memorized channel.
The TV will tune to this channel when the
timer turns it on.
Press or
to slowly adjust the time.
Press and hold or to quickly adjust the
time.
39
Part III: Setup
Advanced Menu: Convergence
Convergence
(Figure 1)
Your Mitsubishi TV has three picture tubes
which are aligned to properly converge the
projected light beams on the screen. Each
picture tube projects a single color of red,
blue or green. During production, your
TV was carefully adjusted to properly align
these colors. As a special feature, you have
the ability to adjust the red and blue light
beams in reference to the xed gr een l ight
beam. This process is called convergence.
Figure 1. Convergence selection in the Advanced menu
Convergence Menu
(Figure 2)
Convergence aligns the entire screen at
once. Select either Red Convergence or
Blue Convergence to begin alignment. To
align 64 individual points, see Advanced
Convergence, page 41.
Reset Factory Defaults
(Figure 2)
Figure 2. Convergence menu
This allows you to reset the convergence to
the factory settings. The message “Conver-
gence completed” will be displayed when
the factory defaults have been restored.
Convergence Screen
(Figure 3)
Red
When the Red and Blue crosshairs are prop-
erly converged, the center-screen crosshairs
will appear white. You can use , , ,
or to move the Red and Blue crosshairs.
Press VIDEO to switch between Red and
Blue. Press AUDIO for the Advanced Con-
vergence screen, and see Advanced Conver-
gence, page 41, for instructions.
Press ADJUST to converge the lines
Press VIDEO to switch to Blue
Press MENU to go back
Press CANCEL to delete changes
Press AUDIO Advanced Convergence
Figure 3. Convergence screen
40
Part III: Setup
Advanced Menu: Advanced Convergence, Video Display, and
Video Mute
Advanced Convergence
(Figure 1)
After adjusting the Red Convergence and
Blue Convergence, you can ne- tune your
TV by adjusting the Red and Blue conver-
gence at 64 individual points. Move the
ashi ng br acket toa posi tion needi ng adj ust -
ment by pressing , , , or . Press
ENTER to select the position ( ashi ng wi ll
stop). Move the Red or Blue line by press-
ing , , , or . Press VIDEO to switch
between the Red and Blue lines. A
Press INFO for help
Figure 1. Advanced Convergence screen
position is properly converged when all
three lines combine to appear white. Press
ENTER to deselect the position ( ashi ng wi ll
resume), and move the brackets to the next
position needing adjustment. When com-
pleted, press MENU to save your changes,
and exit the Advanced Convergence screen.
There are more than 64 line intersections,
but the ashi ng br acket wi llonl y st op at
the 64 adjustment points.
Video Mute
(Figure 2)
Video Mute lets you display a blue or
gray background when no signal is being
received on inputs 1-4, and STB.
Black Enhancement
(Figure 2)
The contrast in dark scenes is enhanced for
better picture quality. Brighter scenes will
not be affected.
Video Display
(Figure 2)
Your Mitsubishi TV will double the lines of
a standard 480i (interlaced) picture to pro-
duce a smoother, more lml ike i ma ge. You
have two choices for your selection; 480p or
960i. The 480p display may be more stable
(although may still show some line structure).
The 960i display may hide the line structure
(although picture movement may be visible
in still images).
Figure 2. Advanced menu
41
Part III: Setup
Audio/Video Menu: AV Memory Reset, and Audio/Video Settings
AUDIO/VIDEO SETTINGS menu
(Figure 1)
Each of the 11 inputs has its own A/V
memory. You can adjust each input’s A/V
memory in two ways. You can use the
menu, or the remote control.
A/V Memory Reset
A/V Memory Reset will return the currently
selected input’s A/V memory to the factory
settings. To reset an input’s A/V memory,
move to A/V Memory Reset, select the input
you want to reset, and press ENTER.
Figure 1. Audio/Video menu
AUDIOSETTINGSandVIDEOSETTINGS
After selecting AUDIO SETTINGS or VIDEO
SETTINGS, you can adjust the settings by
pressing , , , or . For descriptions of
the individual A/V settings see A/V Setting
Descriptions, pages 46-47.
0
Using the AUDIO and VIDEO Buttons
VIDEO
INPUT CHANNEL VOLUME
on the Remote Control
1
(Figure 2)
AUDIO
MUTE
HOME
1
Press AUDIO or VIDEO to cycle through
the available settings.
2
Press or to adjust the setting. After 5
seconds of inactivity, the setting display
will disappear.
ENTER
EXCH
2
ADST
CANCEL
MENU
Figure 2. The AUDIO, VIDEO, and ADJUST buttons.
42
Part III: Setup
Audio/Video Menu: TV Speakers, and Audio Output
TV Speakers
(Figure 1)
This selection will turn on or off the
TV’s internal speakers. You may select
Off when sending the sound through a sepa-
rate stereo system or surround sound A/V
receiver.
Figure 1. Audio/Video menu
To prevent damage from a sudden
increase in volume, make sure the TV
volume is low before choosing ON.
Audio Output
(Figure 1)
Select Fixed if your audio receiver or stereo
system can be controlled with a remote.
This allows you to adjust the volume with the
system’s remote control or the TV remote
control, if compatible. This setting is better
for surround sound receivers. Select Vari-
able if your audio receiver or stereo system
cannot be controlled with a remote. This
allows the TV’s internal circuitry to adjust the
volume.
43
Part III: Setup
Clock Menu: Clock Setting (Manual)
Clock Setting (Manual)
(Figure 1)
For the manual clock setting, select the cur-
rent time, including AM or PM.
Press or
to slowly adjust the time.
Press and hold or to quickly adjust the
time.
Figure 1. Clock menu (Manual)
Set Day
(Figure 1)
When Manual has been selected for the
Clock Setting, you need to select the current
day of the week.
44
Part III: Setup
Clock Menu: Clock Setting (Auto)
Clock Setting (Auto)
(Figure 1)
Setting the Clock Setting to Auto will
automatically set the day and time using
Extended Data Service (XDS) time data.
This data is automatically retrieved from a
PBS channel or other channel carrying this
service.
Figure 1. Clock menu (Auto)
Time Zone
(Figure 1)
When Auto has been selected for the Clock
Setting, you need to select the correct time
zone (Atlantic, Eastern, Central, Mountain,
Paci c, Al aska, or Hawai i) for your ar ea.
Daylight Savings Time
(Figure 1)
When Auto has been selected for the Clock
Setting, you need to select the Daylight Sav-
ings Time (DST) option that your state uses
(Applies = uses DST, or Ignore = does not
use DST).
The clock time and day will be set auto-
matically after tuning to a channel carrying
the Extended Data Service (XDS) time data
(usually your local PBS channel).
45
Part III: Setup
A/V Setting Descriptions: Audio
Audio Settings
• Mono: Reduces background noise, and
should be used when receiving a weak
stereo audio signal. All audio will be played
mono with this setting.
Bass enhances or reduces low fre-
quency sound.
Treble enhances or reduces high fre-
quency sound.
Listen to (for INPUTs) is not available.
Balance adjusts the level of sound
between the left and right speakers.
Level Sound automatically equalizes
the volume level of programs containing
signi cant level differ ences fromon e
segment to another (for example, regu-
lar Programming to commercials). To
receive the best del itywi thmusi cpr o-
grams, you can turn this setting to Off.
Surround creates simulated stereo and
surround effects. Your choices are:
• Off: No surround effects. Use this setting
when using an A/V receiver with Dolby™ Pro
Logic Surround, or Dolby™ Digital Surround.
• Simulated Stereo: Your TV will create a
simulated stereo effect when watching a non-
stereo program.
• Surround Sound: Your TV will create a
simulated surround effect when watching a
stereo program.
Listen to (for Ant-A and Ant-B) deter-
mines how your TV will receive a broad-
cast audio signal and play back the
sound you hear. Your choices are:
• Stereo: Default setting. The TV will play
stereo broadcasts in stereo and mono broad-
casts in mono. The word “Stereo” will be
displayed when you tune to a channel broad-
casting stereo.
• SAP (Second Audio Program): Additional
monaural soundtrack that you cannot hear
during normal TV viewing. The SAP signal
might be related to the program you are
watching, such as a soundtrack in a foreign
language, or unrelated to the program you
are watching, such as a weather report. If
a SAP signal is broadcast, the letters “SAP”
will be displayed when you tune to the chan-
nel.
46
Part III: Setup
A/V Setting Descriptions: Video
Video Settings
IRIS™ is the Intelligent Room Illumi-
nation (light) Sensor. When IRIS™ is
on, your TV will automatically adjust pic-
ture contrast and brightness for best
quality (Contrast and Brightness cannot
be adjusted manually).
Video Noise reduces minor noise (grain-
iness) in the broadcast or input signal.
Image Type maximizes the original
camera media: Video or Film. Video
media uses a video camera and is cre-
ated at 30 frames per second. Film
media uses a lmc ame r aand i screat ed
at 24 frames per second. Examples of
Video media are live TV broadcast such
as news, special events, or video taped
programs. Examples of lmme di aar e
motion pictures, made-for-TV movies,
and many prime time programs. Filmed
media is converted by the broadcaster
or home video company to 30 frames
per second to match TV or video stan-
dards. This conversion can leave subtle
“picture artifacts” or conversion errors.
Setting the Image Type to Film can
reduce the picture artifacts and improve
the picture quality, when viewing a 480i
image.
Contrast provides a slider to adjust
the white-to-black level. Low contrast
shows a variety of shades in darker
images, while high contrast shows
darker images more uniformly black and
makes colors appear more vibrant.
Brightness provides a slider to adjust
the overall brightness of the picture.
Sharpness provides a slider to adjust
the detail and clarity.
Color provides a slider to adjust the
color intensity.
Tint provides a slider to adjust the pro-
portion of red to green.
Color Temp (Color Temperature) allows
you to adjust how white images are dis-
played. Your choices are:
• Low 6500K or Low (for DTV): White images
will have a warm cast to them. This adjust-
ment is an average and can vary due to
ambient room lighting, video scene bright-
ness and the TV’s age. The Low 6500K
represents the 6500K industry standard for
NTSC (non-DTV) pictures.
• Medium: White images will be balanced
between the Low (warm) and High (cool)
settings.
• High: White images will have a cool cast
to them. This setting may provide the most
realistic picture under bright lighting.
47
ver wish you were actually part of
the movie or sitting in a field-level
box at the 50-yard line, watching the
E
game? The Mitsubishi total home theater
system is the next best thing to being there.
A home theater immerses you in both video
and audio to a point of surrealism. The
core of the home theater system is your
bigscreen television, the biggest one your
room can accommodate.
Operation
Remote Control Functions...... 50-57
Overview.....................................50
Care and Operation ...................51
Channel Selection.......................52
Sleep Timer ................................52
System 4 Home Theater
IR Control ...................................53
Special Functions......................54
Operation of PIP and POP... 54-55
Display Formats................... 56-57
IMPORTANT NOTES #2.................58
49
Part IV: Operation
Remote Control Functions: Overview
Overview
(Following page, gur e1)
tion.
1
Slide Switch: Select A/V product to be
17
18
19
CANCEL: Clear SQV and some menu
entries.
MENU: Display 3D Graphical
on-screen menu system.
INFO: Display on-screen summary of
the current input used and any broad-
cast information available (including cur-
rent V-Chip information).
controlled by the remote control.
Numbers: Individually select channels or
input information into TV.
POWER: Turns power on and off for TV
and other A/V products.
SQV (Super Quick View™): Scan
through a memorized list of favorite
channels.
2
3
4
20
GUIDE: When the slide switch is
set to CABLE/DBS/DTV, display the
on-screen program guide (some cable
boxes and DBS/DTV receivers).
V-CHIP: Enable/Disable the V-Chip
Lock.
FORMAT: Change the shape and size of
the main TV picture.
PIP INPUT: Select the PIP or POP input
source.
5
QV (Quick View™): Switch to last chan-
nel viewed.
HOME THEATER: Enables the Home
Theater IR System. Once enabled, a
press of this key, when in the VCR, DVD,
or Cable/DTV/DBS layer, will properly
switch the inputs of the AV receiver and
the TV so the audio and video automati-
caly coincide.
SLEEP: Set the TV to turn off within 2
hours. See Sleep Timer, page 52, for
setup instructions.
VIDEO: Select the video settings.
AUDIO: Select the audio settings.
MUTE: Turn sound on or off.
INPUT: Select the signal to view
(Ant-A, Ant-B, DTV, Input-1, Input-2,
Input-3, Input-4, Component-1, Compo-
nent-2, VGA, or STB).
CHANNEL: Scroll up or down through
memorized channels.
VOLUME: Change sound level.
ENTER/EXCH: Select a channel number
or menu item. Exchange PIP or POP
and main TV picture.
6
21
22
23
24
25
7
PIP/POP: Cycle through PIP and POP
display choices.
PIP CH: Scroll up or down through
memorized channels in PIP or POP.
REC: Manually record with your VCR.
STOP: Stop your VCR, DVD, or CD.
PAUSE: Pause your VCR, DVD, CD, or
freeze the PIP or POP image.
REW/REV: Rewind or reverse search
with your VCR, reverse scan with your
DVD, or skip reverse with your CD.
PLAY: Play your VCR, DVD, or CD.
FF/FWD: Fast forward or forward search
with your VCR, fast play with your DVD,
or skip forward with your CD.
8
9
26
27
28
10
11
29
12
30
13
31
14
15
HOME: Exit on-screen menus and return
to TV viewing.
16
ADJUST: Navigate menus, change set-
tings, and move the PIP on-screen loca-
50
Part IV: Operation
Remote Control Functions: Care and Operation
Operation
VCR
CABLE/DBS/DTV
TV
DVD
AUDIO
Installing the Batteries:
(Figure 2)
1
POWER
2
5
3
1
4
7
3
HOME
1
Remove the remote control’s back cover
by gently pressing the ridged tab in the
direction of the arrow and sliding off the
cover.
Load the batteries, making sure the
polarities (+) and (-) are correct.
6
9
TH6ER
2
8
SLEEP
7
VIDEO
8
AUDIO
9
MUTE
4
5
0
INPUT CHANNEL VOLUME
2
11 12 13
10
E1NT4ER
HOME
15
EXCH
CANCEL
17
AT
16
For Best Results from the Remote Con-
trol:
MU
18
INFO
19
GUIDE
PIP CH
VP PIT
21 23
FOT PP
22 24
Be within 20 feet of the equipment.
Do not press two or more buttons at the
same time unless instructed to.
Do not allow to get wet or become
heated.
25
20
REC
STOP
PAUSE
26
27
28
29 30 31
REW/REV
PLAY
FF/FWD
Avoid dropping on hard surfaces.
Do not use harsh chemicals to clean.
Use only a soft, lightly moistened cloth.
Do not mix new and old batteries.
Do not heat, take apart, or throw batter-
ies into re.
Figure 1. The remote control functions.
Use only AAA batteries.
Operating the Remote Control:
You can use the remote to control the TV,
CABLE/DBS/DTV, VCR, DVD, and AUDIO
products. Select the product you want to
size AAA
batteries
2
1
control by moving the slide switch ( of
1
gur e1) tothe appr opr iat eposi tion. The
remote control has been preset to operate
the TV and other Mitsubishi products. To
program the remote control to operate other
products, see Use of the Remote Control
with Other A/V Products, pages 26-27.
Figure 2. Installing the batteries.
The remote control may return to its
initial setting when the batteries are
changed. You may need to reprogram.
51
Part IV: Operation
Remote Control Functions: Channel Selection and Sleep Timer
Channel Selection
Sleep Timer
For Non-DTV Channels:
Setting the Sleep Timer:
Enter three numbers (for channel 2,
press 002).
Press SLEEP on the remote control.
A message indicating the length of time
the sleep timer is to be set for is dis-
played on the TV screen.
Each press of SLEEP will increase
the time displayed by 30 minutes, until
the maximum value of 120 minutes is
reached.
or
Press the channel number and ENTER
(for channel 2, press 2, then ENTER).
or
Enter the channel number and wait four
seconds. The TV will change automati-
cally.
After 5 seconds of inactivity, the mes-
sage will disappear.
Press SLEEP to view the remaining time
before the timer turns the TV off.
Canceling the Sleep Timer:
Press SLEEP to display the on-screen
message.
Press SLEEP repeatedly until OFF is
displayed.
After 5 seconds of inactivity, the mes-
sage box will disappear.
Remote Control Functions: System 4 Home Theater IR Control
to change inputs. You will automatically
hear the high quality digital surround sound
from digital products like your DTV receiver
and DVD player, and high quality analog
stereo or surround sound from non-digital
products like your VCR.
The Mitsubishi System 4 Home Theater IR
Control is a special feature that makes it
easier to use your TV with a digital surround
sound A/V receiver. Once your equipment
is properly connected and set up, your TV
and digital A/V receiver will change inputs
together, to match high resolution pictures
with the proper surround sound.
Additionally, all IR remote signals from your
Mitsubishi remote or other manufacturers
remote will be passed through your TV to
your A/V devices. Your A/V devices can
be hidden or behind cabinet doors and con-
trolled by pointing the remote at the TV.
When you change inputs on your TV to
watch different video products, your TV will
send signals via your remote control and the
infrared emitters to your digital A/V receiver
52
Part IV: Operation
Remote Control Functions: System 4 Home Theater IR Control
Requirements for Operation
A/V devices connected as described on page 15.
Cable Box connected as on page 16 or Cable Box with an S-Video output conneced as
on page 19, Connecting an S-Video Device.
TV connected to A/V receiver (TV Monitor Audio Out To A/V Receiver TV Input).
TV Inputs renamed (see page 33 for naming help):
Cable Box connected to Ant A or B
Cable Box connected to STB
VCR conneceted to Inputs 1-4
DVD conncected to any Input
Satellite Receiver connected to any Input
Digital Television Receiver on HD Input
=
=
=
=
=
=
Cannot be Renamed
Rename To Cable
Rename To VCR
Rename To DVD
Rename To DBS
Cannot Be Renamed
Remote Control programmed to operate your other A/V Devices by System 4 properly
activated (see pages 28-29).
IR emiters properly connected and placed (see page 22).
System 4 allows for only one of the
following:
• Cable Box
• Satellite Receiver
• Digital TV Receiver
Operation (VCR as example)
To watch your VCR:
1
Turn on the TV and A/V Receiver.
2
Move slide switch to VCR.
3
Point remote at the TV and press the HOME THEATER button.
4
The TV and A/V Receiver should change to the appropriate inputs.
5
Operate the VCR.
Other commands from your Mitsubishi
remote control, or other manufacturer’s
remote, will be passed through the TV.
53
Part IV: Operation
Remote Control Functions: Special Functions
When your remote control has been Pro-
grammed to operate another manufacturer’s
product, the function performed on each
layer can vary. The most common functions
are:
VCR
POWER
CHANNEL up/down
PLAY
REC
PAUSE
STOP
FF/FWD
REW/REV
Mitsubishi VCRs will be compatible with additional buttons
Cable Boxes and Satellite Receivers
POWER
ENTER (on some models)
CANCEL (on some models)
ADJUST up/down/left/right
(on some models)
GUIDE (on some models)
CHANNEL up/down
0-9 Number Buttons (on some models)
A/V Receivers
POWER
VOLUME
MUTE
Mitsubishi A/V Receivers
Direct Input Selection Buttons -use number buttons, SQV, and QV (on some models)
Mitsubishi CD Players (not all functions for all models)
PLAY
FF/FWD
REW/REV
PAUSE
STOP
DVD and Laser Disc Players (not all functions for all models)
POWER
MENU
PLAY
ARROW up/down/left/right
(on some models)
PAUSE
CANCEL (on some models)
STOP
REW/REV ENTER
0-9 Number Buttons (on some models)
Remote Control Functions: Operation of PIP and POP
Picture-In-Picture (PIP) and Picture-Outside-
Picture (POP) features allow you to view Pro-
Activating the PIP and POP
(Figures 1-5 on the following page)
gramming in different ways. While watching
Press PIP/POP to choose a display format.
the main screen, you can display programs
With each press of the PIP/POP button on
from other channels and other inputs. To
the TV remote control (within 3 seconds of
see which inputs can and cannot be used
each other), the PIP/POP will cycle through
the following display options.
together, see How Connections Affect the
PIP and POP - Table 1, page 14. You can
display large and small PIPs, side-by-side
pictures, three POPs, or nine POPs.
1
POP: side-by-side pictures
2
POP: three POPs
3
POP: nine POPs
4
PIP: large PIP
5
PIP: small PIP
To turn PIP/POP off, wait at least 10 sec-
onds, and press PIP/POP. The next time
you activate PIP/POP, the last used PIP/
POP format will be displayed rst .
54
Part IV: Operation
Remote Control Functions: Operation of PIP and POP
Changing PIP/POP Inputs
Press PIP INPUT to cycle through available
inputs. To see which inputs can and cannot
be used together, see How Connections
Affect the PIP and POP - Table 1, page 14.
MAIN
PICTURE
1
Side-by-Side
Changing PIP/POP Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-A, and Ant-B.
POP 1
Exchanging Program Images
Press ENTER/EXCH to exchange the main
picture and the PIP/POP picture.
MAIN
PICTURE
POP 2
POP 3
2
Moving PIP Image
Press ADJUST , , , or to move the PIP
display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the
TV will cycle through memorized channels
or strobe pictures from other A/V compo-
nents in the POP display. Press PAUSE to
activate/pause automatic POP switching.
POP 1 POP 2
POP 3
MAIN
PICTURE
POP 4
POP 5
POP 6
POP 9
3
POP 7 POP 8
Selecting POP “Live” Image
Press ADJUST , , , or to select a
different POP “live” image (automatic POP
switching must be paused).
Ant-A 002 KCBS
480i Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP A 017
Freeze the PIP and Side-By-Side
Picture
4
Press PAUSE to freeze the PIP and side-by-
side images. Press Pause again to return to
a “live” image.
PIP/POP Audio Signal
Ant-A 002 KCBS
480i Standard
Stereo SAP
TV-PG DLSV
SQV1
PIP A 017
For PIP/POP audio connection illustration,
3
see Back Panel Functions - , page 13.
Volume for the PIP AUDIO OUTPUT is con-
trolled by the ampli er or wirel ess head-
phones.
5
55
Part IV: Operation
Remote Control Functions: Display Formats
This is a wide screen TV (also known as
a 16:9 TV). This shape re ect st he new
types of images available from HDTV and
many DVDs. There are still many older style
narrow screen images (called 4:3 aspect
ratio) you will encounter. While there will
never be a perfect solution for displaying
a narrow image on a wide screen, Mitsubi-
shi offers several display formats to choose
from.
1
Standard: This is the full screen format.
HDTV signals will automatically use this
format. This format is also useful to dis-
play Anamorphic DVDs that have 1.78:1
or 1.85:1 aspect ratios. Anamorphic
DVDs that have the 2.35:1 aspect ratio
will still display black bars at the top and
bottom. Narrow (4:3) images will be
stretched evenly from side to side.
2
Expand: This will enlarge the picture,
cropping off some of the image at the
top and bottom. This is useful to reduce
the letterbox top and bottom bars of non-
anamorphic DVDs or to correct narrow
(4:3) images that have been stretched in
the Standard format.
Press FORMAT on the TV remote control
to cycle through the ve avai labl edi spl ay
formats.
When displaying VGA or HDTV (1080i)
signals, the FORMAT control will not
operate. All HD signals will automaticaly
be shown using the Standard format ,
and will llthe screen.
3
Zoom: This will enlarge the picture, crop-
ping off some of the image at each
side, and top and bottom. This is useful
to remove or reduce the black top and
bottom bars on anamorphic DVDs with
a 2.35:1 aspect ratio.
Stretched and Zoom formats are not
available during PIP/POP functions.
4
Stretched: (Not available when viewing
480p signals) This format will stretch a
narrow (4:3) image across the screen,
however, there is less stretch in the
center than the sides. This will allow
the entire narrow image to be displayed
across the screen with less distortion
than seen in the Standard format.
Caution should be observed when using
the Narrow format due to the stationary
gray side bars. Please see pages 23 or
58 for guidelines concerning stationary
images.
5
Narrow: This format will display narrow
(4:3) images in their original shape, and
add stationary gray side bars to ll the
screen.
56
Part IV: Operation
Non-Anamorphic Picture (4:3)
Anamorphic Widescreen Picture (16:9)
1
1
2
3
4
2
3
4
5
5
57
Part IV: Operation
Warning: Do not leave stationary or letterbox images on-screen for
extended periods of time. Mix the types of pictures shown.
Uneven picture tube aging is NOT covered by your warranty.
Still or stationary images may be received
from broadcasters, cable channels, sat-
ellite channels, DVD discs, video tapes,
laser discs, on-line services, web/internet
searching devices, video games, and digi-
tal TV tuner/converter boxes. Examples of
these types of images can be, but are not
limited to the following:
The normal use of a TV should include
a mixture of TV picture types. The most
frequently used picture types should ll
the screen with constantly moving images
rather than stationary images or patterns.
Displaying the same stationary patterns
over extended periods of time, or display-
ing the same stationary pattern frequently
can leave a subtle but permanent ghost
image. To avoid this, mix your viewing
pattern. Do not show the same stationary
image for more than 15% of your total TV
viewing in any one week. Display con-
stantly moving and changing images that
ll the screen whenever possi bl e.
Letterbox top/bottom black bars:
shown at the top and bottom of the TV
screen when you watch a widescreen
(16:9) movie on a standard (4:3) TV.
Side bar images: solid bars shown
on each side of an image when watch-
ing a standard (4:3) program on a wi-
descreen (16:9) TV.
Stock-market report bars: ticker run-
ning at the bottom of the TV screen.
Shopping channel logos & pricing dis-
plays: bright graphics that are shown con-
stantly or repeatedly in the same location.
Video game patterns and scoreboards
Bright station logos: moving or low-
contrast graphics are less likely to cause
uneven aging of the picture tubes.
This projection TV uses picture tubes to
project the image to the screen. All
picture tubes age with use. As they
age, their light output is gradually reduced.
Normal TV pictures ll the screen wi th
constantly changing images. Under these
conditions, picture tubes age at an even
rate across the entire screen. This main-
tains a TV picture that is evenly bright over
the whole screen. Stationary images or
images that only partially ll the screen
(leaving black or colored bars to ll the
screen), when used over extended periods
of time or when viewed repeatedly, can
cause uneven aging of the phosphors
and leave subtle ghosts of the stationary
images in the picture.
On-line (internet) web sites: or any
other stationary or repetitive computer style
images.
58
Appendix A: Bypassing the V-Chip Lock
Appendix A: Bypassing the V-Chip Lock
Bypassing the V-Chip Lock
After you set the lock, you need your
passcode to view a V-Chip locked pro-
gram, view the locked TV, cancel the
lock, or enter the V-Chip lock menus.
If you forget your passcode, you can
view the locked TV without entering your
passcode. This is done by pressing the
number 9 and QV buttons on the remote
TV control at the same time, when your
passcode is requested. This process
temporarily unlocks the TV.
When entering the V-Chip Lock menu,
this process deletes your old passcode
and prompts you to enter a new pass-
code.
Cut along the dotted line and le bypass
instructions in a safe place for future
reference.
When changing or deleting your
passcode, you must use the remote
control included with this TV. You
cannot use a Mitsubishi remote control
from another component or a “universal”
remote.
59
59
Appendix B: High Resolution Input Connection Compatiblity
Component-1 and Component-2 Inputs
Input Levels and Timing with Com-
ponent Video
These inputs are compatible with component
video signals from standard DVD players
and other equipment sending a standard
NTSC component video signal (480i).
These inputs may also be compatible with
newer DVD players sending a progressive
NTSC component video signal (480p).
Y
=1.0Vp-p (includes sync) 75ohms
Pr =700mVp-p, 75ohms (can also receive
signals from outputs labeled R-Y and Cr)
Pb =700mVp-p, 75ohms (can also receive
signals from outputs labeled B-Y and Cb)
VGA Input
This input will accommodate most comput-
ers capable of supporting a VGA monitor.
The only compatible display resolution is
640x480. The sync rate is 60hz. SVGA and
XVGA resolutions are not supported.
DTV Input
This input is compatible with most standard
DTV receivers with component video out-
puts. Compatible DTV signals are SDTV
480i, 480p, and HDTV 1080i. All other DTV
signals, such as 720p, need to be converted
by the DTV receiver to one of the compat-
ible signal types. Please check the DTV
receiver speci cat ions bef or econnect ing.
Input Levels and Timing When
Used With Component Video
Signals
EIA - 770.3 Standard Levels and Timing
Y
=1.0Vp-p (includes sync) 75ohms
Pr =700mVp-p, 75ohms
Pb =700mVp-p, 75ohms
H
V
=Not Used
=Not Used
This input is also compatible with some DTV
receivers using RGB with “sync on green”
or RGB with “separate H and V sync”. Com-
patible DTV signals are SDTV 480i, 480p,
and HDTV 1080i. All other DTV signals,
such as 720p, need to be converted by the
DTV receiver to one of the compatible signal
types. Industry standards for DTV RGB sig-
nals systems, synchronization, timing, and
signal strengths are not currently estab-
lished. These inputs will not be compatible
with all DTV receivers that offer RGB. If
your DTV receiver offers both DTV compo-
nent video signals and DTV RGB signals,
Mitsubishi suggests you use the DTV com-
ponent video signals. Please check the
DTV receiver speci cat ions bef or econnect -
ing.
Input Levels and Timing When Used
With RGB Video Signals
G(Y) =1.0Vp-p 75ohms (compatible with sync on green)
R(Pr) =700mVp-p, 75ohms
B(Pb) =700mVp-p, 75ohms
H
=4Vp-p+/-1.0v, 75ohms
(when using separate H and V sync)
V
=4Vp-p+/-1.0v, 75ohms
(when using separate H and V sync)
61
Appendix C: Remote Control Programming Codes
A/V Receivers
Cable Box
VCRs
Mitsubishi . .. .. .. . 010, 011, 012, 013, 014,
ABC . .. .. .. .. .. . 124
Mitsubishi . .. .. .. . 001, 002, 060, 067, 068, 061,
.
.. .. .. .. .. .. . 015
Archer . .. .. .. .. . 132, 125
Cableview . .. .. .. . 105, 132
Citizen . .. .. .. .. . 122, 105
.
.. .. .. .. .. .. . 062
Admiral . .. .. .. .. . 220
Admiral . .. .. .. .. . 055
Aiwa. .. .. .. .. .. . 225, 226
Denon . .. .. .. .. . 234, 235, 236
Aiwa. .. .. .. .. .. . 047, 052
Akai . .. .. .. .. .. . 049, 034, 035, 036
Color Voice
Comtronics
.
.
.. .. . 128, 129, 130, 106, 107
.. .. . 128, 129, 130 ,106, 107
Fisher
.
.. .. .. .. . 204
Audio Dynamic
.
.. . 059, 031
Gerrard. .. .. .. .. . 213
Harman Kardon . .. . 215
Jensen . .. .. .. .. . 223
JVC . .. .. .. .. .. . 232, 233
Curtis
Diamond
Eagle
.
.. .. .. .. . 112, 113
Bell & Howell . .. .. . 025, 033
Broksonic . .. .. .. . 040, 046
Canon . .. .. .. .. . 043, 045
Citizen . .. .. .. .. . 026
.
.. .. .. . 124, 132, 125
.
.. .. .. .. . 129
Eastern. .. .. .. .. . 134
Kenwood
.
.. .. .. . 200, 208
GC Brand . .. .. .. . 132, 105
Craig
Curtis Mathes. .. .. . 065, 044, 047
Daewoo .. .. .. . 063, 021, 044, 079
.
.. .. .. .. . 025, 049, 026
Magnavox . .. .. .. . 227, 228
GE
.
.. .. .. .. .. . 111, 112, 113
Marantz
Mclintosh . .. .. .. . 216
.
.. .. .. . 224
Gemini . .. .. .. .. . 122, 143
General Instrument
.
DBX . .. .. .. .. .. . 059, 030, 031
Dimensia
Emerson
Nakamichi . .. .. .. . 206, 217
Onkyo . .. .. .. .. . 209, 214
/Jerrold
.
.. .. .. . 111, 119, 120, 121, 122,
.. .. .. .. .. .. . 123 124, 125, 126, 127
Hamlin . .. .. .. .. . 140, 141, 142, 145, 118,
.
.
.. .. .. . 065
.. .. .. . 023, 038, 039, 040, 045, 046,
.
Optimus
.
.. .. .. . 203, 227, 231, 230
.
.. .. .. .. .. .. . 062, 063
Panasonic . .. .. .. . 219, 218, 221
Philips . .. .. .. .. . 223
.
.. .. .. .. .. .. . 112
Fisher
Funai
.
.
.. .. .. .. . 025, 028, 029, 027
.. .. .. .. . 047, 046, 040
Hitachi . .. .. .. .. . 103, 124
Pioneer. .. .. .. .. . 205, 207
Macom . .. .. .. .. . 103, 104, 105, 108
Magnavox . .. .. .. . 128, 129, 130, 106, 107,
GE
Go Video
Goldstar
.
.. .. .. .. .. . 057, 065, 044
Quasar . .. .. .. .. . 219, 218, 221
RCA. .. .. .. .. .. . 203, 205, 227, 231,230
Sansui . .. .. .. .. . 203, 211, 239
.
.
.. .. .. . 057, 069, 070, 071
.. .. .. . 026
.
.. .. .. .. .. .. . 133, 138
Memorex
.
.. .. .. . 130
Hitachi . .. .. .. .. . 043, 065, 020
Sharp
Sony
.
.
.. .. .. .. . 234, 237
.. .. .. .. . 222
Movietime . .. .. .. . 132
Instant Replay
.
.. . 044, 043
Oak . .. .. .. .. .. . 139, 137, 102
Panasonic . .. .. .. . 109, 110, 114
Jensen . .. .. .. .. . 059
Sound-sigh
.
.. .. . 238
JVC . .. .. .. .. .. . 059, 030, 031, 054, 076, 077
TEAC
Technics
Victor
.
.. .. .. .. . 212, 213, 210, 211
.. .. .. . 221, 218, 219
Paragon
.
.. .. .. . 117
Kenwood
.
.. .. .. . 059, 030, 026, 031
.
Philips . .. .. .. .. . 128, 129, 130, 106, 107,
.. .. .. .. .. .. . 133, 138
LXI . .. .. .. .. .. . 047, 026, 020, 027, 028, 025,
.. .. .. .. .. .. . 029
Magnavox . .. .. .. . 051, 043, 044
.
.. .. .. .. . 232, 233
.
.
Yamaha. .. .. .. .. . 201, 202
Pioneer. .. .. .. .. . 101, 116
Pulsar
Puser
.
.
.. .. .. .. . 105, 132
.. .. .. .. . 132
Marantz
.
.. .. .. . 059, 030, 031
.. .. .. .. . 026
.. .. .. . 044, 029
.. .. .. .. . 058, 060, 067, 068, 061, 062
Marta
.
RCA. .. .. .. .. .. . 115
Memorex
.
Realistic
Regal
.. .. .. .. .. .. . 145
Regency .. .. .. . 134
Rembrant . .. .. .. . 137, 132, 105, 138
.
.. .. .. . 132
MGA
.
.
.. .. .. .. . 112, 118, 140, 141, 142,
Minolta . .. .. .. .. . 020, 065
Multitech .. .. .. . 067, 047, 024
.
.
.
NEC. .. .. .. .. .. . 059, 030, 031, 054
Olympic
Optimus
.
.
.. .. .. . 044, 043
Samsung
Satellite. .. .. .. .. . 100
.
.. .. .. . 105
.. .. .. . 048, 041, 055, 026
Orion
.
.. .. .. .. . 046, 040
Scienti cAt lant a . .. . 111, 112, 113
Signature . .. .. .. . 119, 124, 125, 126, 127,
Panasonic . .. .. .. . 043, 044, 041, 042
Penney . .. .. .. .. . 044, 020, 065, 025, 059, 030,
.
.. .. .. .. .. .. . 120, 121, 122, 111
SL Mark .. .. .. . 105, 101
Sprucer. .. .. .. .. . 105, 110
Starcom .. .. .. . 119, 124, 125, 126, 127,
.. .. .. .. .. .. . 120, 121, 122, 111
.
.. .. .. .. .. .. . 031
DVD Players
.
Pentax . .. .. .. .. . 020, 031, 065
Mitsubishi . .. .. .. . 003
Denon . .. .. .. .. . 250
Philco
.
.. .. .. .. . 051, 044, 047, 043, 046, 040
.
Philips . .. .. .. .. . 051, 043, 044
Pioneer. .. .. .. .. . 043
Ferguson
.
.. .. .. . 251
.
GE
.
.. .. .. .. .. . 251
Stargate
Teleview
Texscan
.
.
.
.. .. .. . 132, 105
.. .. .. . 101, 105
.. .. .. . 144
Proscan
.
.
.. .. .. . 065, 020, 043, 044, 051, 066,
JVC . .. .. .. .. .. . 257
Normande . .. .. .. . 251
Panasonic . .. .. .. . 250
.. .. .. .. .. .. . 021, 022
Quasar . .. .. .. .. . 041, 042, 043, 044
Tocom . .. .. .. .. . 135, 136
Toshiba . .. .. .. .. . 104
Radio Shack . .. .. . 053, 044, 025, 056, 029, 060,
Philips/Magnavox
.
. 258
.
.. .. .. .. .. .. . 047
Pioneer. .. .. .. .. . 252
Unika
.
.. .. .. .. . 132, 125
RCA. .. .. .. .. .. . 053, 065, 020, 043, 044, 049,
RCA/Proscan . .. .. . 251, 256
United Artists . .. .. . 139, 137, 102
.
.. .. .. .. .. .. . 051, 066, 021, 022
Saba
Sony
.
.
.. .. .. .. . 251
.. .. .. .. . 254
United Cable . .. .. . 119, 124, 125, 126, 127,
Realistic
.
.
.. .. .. . 044, 025, 056, 029, 060, 047
.. .. .. . 057, 022, 024, 053
.
.. .. .. .. .. .. . 120, 121, 122, 111
Samsung
Thompson . .. .. .. . 251
Toshiba . .. .. .. .. . 253
Yamaha. .. .. .. .. . 250
Universal
Videoway . .. .. .. . 106
Viewstar .. .. .. . 129, 130
Zenith .. .. .. .. . 117, 100
.
.. .. .. . 122, 132
Sansui . .. .. .. .. . 059, 046, 040, 072
Sanyo
Scott
.
.
.
.. .. .. .. . 025, 029
.. .. .. .. . 021, 022, 024, 029, 058, 060,
.
Zenith
.
.. .. .. .. . 259
.
.. .. .. .. .. .. . 067, 068, 046, 040
Sears
Shaintom
Sharp
Signature 2000
Singer . .. .. .. .. . 037
Sony .. .. .. .. . 048, 049, 050, 073, 074, 075
SV2000. .. .. .. .. . 047
Sylvania .. .. .. . 051, 043, 044, 047
Symphonic
.
.. .. .. .. . 025, 026, 027, 028, 020
.. .. .. . 037
.. .. .. .. . 055, 056
.. . 047, 055
.
.
.
.
.
.
.. .. . 047
Satellite Receivers
Tashiro . .. .. .. .. . 026
Mitsubishi
Tatung . .. .. .. .. . 059, 030, 031
HD/Satellite Receiver 006
Echostar/Dishnetwork 175
TEAC
Technics
.
.. .. .. .. . 059, 030, 047, 031
.
.. .. .. . 032, 041, 042, 043, 044
GE
.
.. .. .. .. .. . 176
Teknika . .. .. .. .. . 044, 047
Toshiba . .. .. .. .. . 021, 066
Totevision . .. .. .. . 026
Vector Research . .. . 031
Hitachi . .. .. .. .. . 173, 181
Hughes. .. .. .. .. . 173
Panasonic . .. .. .. . 174
Philips . .. .. .. .. . 171, 172
Primestar . .. .. .. . 178
Wards
Yamaha. .. .. .. .. . 025, 059, 030, 031
Zenith .. .. .. .. . 064
.
.. .. .. .. . 055, 056, 029, 064, 026
RCA. .. .. .. .. .. . 176, 179, 180
.
Sony
.
.. .. .. .. . 177
Toshiba . .. .. .. .. . 170
Uniden . .. .. .. .. . 171, 172
62
Appendix D: Cleaning and Service
Cleaning
Service
Normally, light dusting with a dry, non-
scratching duster will keep your TV clean.
Use care when cleaning your TV with any
other product. If you want to gently wipe
down your TV with a lightly moistened soft
cloth, rst tur nof f and unpl ug your TV. You
can add a few drops of mild liquid detergent
to the water for oily dirt.
If you are unable to correct a problem with
your TV, consult your Mitsubishi dealer or
a Mitsubishi Authorized Warranty Service
Center.
DO NOT adjust any controls other than
those described in this Owner’s Guide.
DO NOT remove the protective back
cover of your TV.
DO NOT allow liquid to enter the TV
through the ventilation slots.
DO NOT use strong or abrasive clean-
ers.
DO NOT use spray liquids or cleaners
directly on the TV’s surface.
DO NOT scrub or rub the TV harshly.
When cleaning the screen behind the
Diamond Shield™, wipe GENTLY up
and down with the grooves. Do not
allow any liquid to drip down the screen
into the TV.
Menus not described and shown in this
owner’s guide are designed for Factory use
and for Authorized Service Personnel. If
you see a menu or display not described
in this owner’s guide, make no changes to
the settings, turn off the TV to clear the dis-
plays and return to normal operation. Non-
authorized changes and changes made by
non-authorized persons may void all or part
of the warranty.
DO NOT use any kind of abrasive, liquid,
or spray cleaner on the surface of the
TV screen.
For further assistance, please call
(800) 332-2119
63
Appendix E: Troubleshooting
Problem
Possible Solution
• The TV remote control does not work.
• Check that the batteries are installed correctly.
• Check that the selected switch is set to “TV”.
• Be no further than 20 feet from the TV when using the
remote control.
• The TV takes several seconds to respond to
channel commands.
• Press ENTER after a channel number to avoid delays.
• Use the three digit number, i.e 002 for channel 2.
• You cannot access a channel.
• Use number keys instead of CHANNEL up/down.
• Be sure the channel you want to view is in memory.
• Check that the TV is turned to the correct input source for
that channel, by pressing the INPUT button.
• Make sure the V-Chip lock is off (page 36).
• On-screen displays appear each time you change a function. • This is part of normal TV operation.
• You cannot program the TV to turn on automatically.
• There is no sound even when the volume is turned up.
• The TV may be locked.
• The clock may not be set.
• Check to see if the MUTE button is on.
• The TV’s “Listen to:” setting may be set to SAP.
• Check that “TV Speakers” setting is ON.
• You have forgotten your lock passcode.
• PIP does not display a picture.
• See Appendix A, Bypassing the V-Chip Lock, page 59.
• Make sure the V-Chip lock is off (page 36).
• Not all inputs can be displayed as a PIP (page 14).
• The sound does not match the screen picture.
• The TV’s “Listen to:” setting may be set to SAP.
• If using stereo or A/V reveiver speakers, check input selec-
tion on the stereo or A/V receiver.
• If using stereo or A/V receiver, check that AUDIO is from
MONITOR OUTPUT on TV’s back panel.
• There is a large black or gray rectangle on the screen.
• You cannot see a picture when you play a VCR tape.
• The TV closed captioning has been set to “text” mode, but
there is no text information being broadcast. Turn Off in the
CLOSED CAPTIONS menu (page 34).
• If you connected your VCR with A/V cables, use the INPUT
button to select the Input source (INPUT-1, INPUT-2, INPUT-3,
or INPUT-4) that the VCR is connected to.
• Check your VCRs owner’s guide for further troubleshooting.
• V-Chip Lock is not working.
• Make sure that V-Chip is On (page 36).
• If V-Chip Hours/Lock by Time is currently set to dissable the
V-Chip lock, the V-Chip will not block programing.
• Menu does not appear when the MENU button is pressed.
• Turn TV power off. Turn TV power on. Press menu button.
64
Index
A
E
M
español, 33
adding and deleting channels 35
Advanced Features menu 39
adaptors (BNC to RCA), 20
adjusting (convergence), 40-41
alignment (convergence), 40-41
antennas (connecting), 16
assistance, 63
maintenance, 2, 67
memorize channels, 33
memory (channel), 35
EXCH button on remote, 55
F
formats (display), 56-57
front control panel, 12
N
naming channels, 35
naming inputs, 33
audio settings 46
G
games, 23, 58
ghost, 23, 58
P
B
balance, 46
passcode, 36, 59
Picture-in-Picture (PIP)
Setup, 14
back panel, 13
bass, 46
Operation, 54-55
Picture-outside-Picture (POP)
Setup, 14
H
Black Enhancement, 41
blocking (enabling V-Chip), 36-38
brightness, 12, 47
bypassing (parental lock), 59
Home Theater IR (System 4)
activation, 28-29
Operation, 54-55
connection, 14-15, 22
special setups, 15
remote control functions, 50
Q
Quick View™ (QV), 50
C
cleaning, 4, 63
R
I
Clock (setting), 44-45
compatibility (signal), 61
contrast, 12, 47
convergence, 40-41
remote control
IMPORTANT NOTES, 23, 58
Important Safeguards, 4-5
interlaced, 41
Settings
Audio, 46
Video, 47
IRIS™, 12, 47
care and operation, 51
channel selection, 52
functions, 50-57
installing batteries, 51
programming codes, 26-27, 62
replacement, 6
Sleep Timer, 52
reset (A/V), 12, 42
D
L
date (setting), 39, 44-45
daylight savings time (DST), 45
dusting, 63
language, 31, 33, 46
letterbox, 2, 19, 23, 56, 58
lighting, 12, 47
locked, 36-38, 59, 64
65
Index
V
V-Chip Lock, 36-38
bypassing, 59
S
safeguards, 4-5
servicing, 2, 5, 63
signal types
entry to, 36
Hours/Lock by Time, 38
passcode setting, 36
ratings and categories, 37
signal information, 37
ventilation, 4, 63
Video Display, 41
Video Mute, 41
1080i, 56, 61
480i, 41, 61
480p (progressive DVD), 41, 61
720p, 61
960i, 41
Sleep Timer, 52
sound (adjusting), 46
Spanish, 33
Video Settings, 47
Special Functions, 54
SQV (Super Quick View™), 35
stand, 4
W
Mitsubishi Limited Warranty, 67
STATIONARY PICTURE
WARNING, 19, 23, 58
surface, 4, 63
surges, 5
T
time (setting), 44-45
Timer (turn TV on), 39
Timer (Sleep), 52
treble, 46
Troubleshooting, 64
TV speakers, 43
U
unpacking, 9
upgradeable, 9
66
Mitsubishi Projection TV Limited Warranty
MITSUBISHI PROJECTION TELEVISION LIMITED WARRANTY
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this television that if purchased from an authorized
MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper workmanship and/or material:
a. Parts. The lenticular (i.e. front picture) screen and/or the DiamondShield™ is warranted against defects in materials and workmanship for a period of
30 days. All other parts are warranted for a period of one year from the date of the original purchase at retail. We will repair or replace, at our option, any
defective part without charge for the part. Parts used for replacement are warranted for the remainder of the original warranty period.
b. Labor. For 30 days after the original purchase at retail, we will repair or replace, at our option, the lenticular screen if it proves defective. For all
other parts, we will provide the labor for a warranty repair by an authorized MITSUBISHI service center without charge for one year from the original
date or purchase at retail.
c. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period.
1. TO OBTAIN WARRANTY SERVICE:
a. Contact your nearest authorized MITSUBISHI service center whose name and address can be obtained from your MITSUBISHI dealer or by writing or
calling MDEA at the address and telephone number provided below.
b. Warranty service will be provided in your home or, if required, at an authorized service shop, provided that your television is located within the
geographic territory customarily covered by an authorized MITSUBISHI service center. If not, you must either deliver your television to an authorized
service location at your own expense, or pay for any travel and/or transportation costs the service center may charge to and from your home. Actual
service labor will be provided without charge.
c. Proof of purchase date from an authorized MITSUBISHI dealer is required when requesting warranty service. Present your sales receipt or other
document which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY
COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you.
2. THIS WARRANTY DOES NOT COVER damage caused by: modi cat ion, al ter at ion, repai r or ser vi ce of the pr oduct by anyone ot her than an aut hor ized
MITSUBISHI service center; physical abuse to, or misuse of, the product; operation in a manner contrary to the instructions which accompany the product,
including uneven picture tube aging and imprinted images on the viewing screen; freight damage; or any damage caused by acts of God such as lightning
or uct uat ion i nel ect rical powe r . Thi swa r rant yal so excl udes al l cost sar isi ng f romi nst al lat ion, adj ust me nt of user cont rol s, ext er nal ant enna syst ems ,
service of products purchased or service outside the U.S.A., initial technical adjustments (set-up) and user-required maintenance. Consult the operating
instructions furnished with the product for information regarding user controls.
3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY IMPLICATION
OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY
PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR.
4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE.
5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special or consequential damages,
so the above limitations or exclusions may not apply to you.
6. This warranty gives you speci cl egal right s, and you ma y al so have ot her right swh i ch var yf roms t at et ost at e.
7. BEFORE REQUESTING SERVICE, please review the instruction booklet to insure proper installation and correct customer control adjustment. If the
problem persists, contact your nearest MITSUBISHI Dealer for the name(s) of authorized MITSUBISHI Service Center(s). If you are unable to obtain this
information, please call 800-332-2119, or write us at the address below.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Road
Irvine, CA 92618-1904
RETAIN THIS PORTION FOR YOUR RECORDS SERIAL NO.
MODEL NO.
DEALER NAME
STREET ADDRESS
CITY
STATE
ZIP
PHONE (
)
PURCHASE DATE
67
If you have questions regarding your television, call Consumer Relations at
To order replacement or additional remote controls or owner’s guides
call (800) 553-7278
or
visit our website at www.mitsubishi-tv.com
© 2001 Mitsubishi Digital Electronics America, Inc.
871D297A30
Designed and Printed in the U.S.A.
TJH/WLS
|
Iiyama E383 User Manual
Intel Box Core I7 4770s 3 1g BX80646I74770S User Manual
Intel NUC Board D53427RKE BOXDC53427HYE User Manual
JVC AV 25L33B User Manual
JVC AV28WT5EP AV24WT5EP User Manual
Lindy 21529US User Manual
NEC PD78212 User Manual
Philips 150S4FB User Manual
Philips 170S7FB User Manual
Philips E line 230E1HSB User Manual