USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product developed
for professional use. Your purchase has also contributed to
reducing the burden on the environment and also to the further
development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the adaptation
of goods and services to the environment. The main problem, as far as computers and other electronics
equipment are concerned, is that environmentally harmful substances are used both in the products and during
their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment,
most of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important
from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions,
radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously
and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international and environmental
labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish
Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric
and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must
be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be
adhered to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of
electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO’99 approved and labelled products may also be
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to
prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are
chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive
damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have
been found in human blood and researchers fear that disturbances in foetus development may occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams must not contain
flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit
boards since no substitutes are available.
Cadmium* *
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays.
Cadmium damages the nervous system and is toxic in high doses. The relevant TCO’99 requirement states
that batteries, the colour-generating layers of display screens and the electrical or electronics components
must not contain any cadmium.
Mercury* *
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic
in high doses. The relevant TCO’99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components associated with the
labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs
break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on
earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead* *
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous
system and in higher doses, causes lead poisoning. The relevant TCO’99 requirement permits the inclusion of
lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
FCC DECLARATION OF CONFORMITY
Model Number:
Trade Name:
PLE383 / PLE383S
iiyama
Responsible party:
Address:
IIYAMA North America, Inc.
65 West Street Road, Suite 101B, Warminster, PA18974 U.S.A.
215-682-9050
Telephone number:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for Class B Personal Computers and
peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the device is operated in a residential environment. This device generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If you determine the device does cause harmful interference to radio
or television reception (this may be determined by monitoring the interference while turning the device off and
on), you are encouraged to try to correct the interference by one of the following measures:
„
„
„
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver
is connected.
„
Consult the dealer or an experienced radio or TV technician for help.
To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.
CAUTION
Changes or modifications not expressly approved by iiyama could void the users authority
to operate the device under FCC compliance regulations.
CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE
STATEMENT
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the radio interference regulation of the Canadian department of communications.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the public low voltage power supply system.
„ We reserve the right to change specifications without notice.
„ All trademarks used in this user manual are the property of their respective owners.
„ As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.
TABLE OF CONTENTS
FOR YOUR SAFETY ..............................................................................
SAFETYPRECAUTIONS .................................................................
SPECIALNOTESONLCDMONITORS .............................................
CUSTOMERSERVICE ......................................................................
CLEANING .......................................................................................
1
1
3
3
3
BEFOREYOUOPERATETHEMONITOR ................................................
FEATURES .......................................................................................
CHECKINGTHECONTENTSOFTHEPACKAGE .............................
OPTIONALPARTS ...........................................................................
INSTALLATION OF STAND ..............................................................
CONTROLSANDCONNECTORS ....................................................
CONNECTINGYOURMONITOR ......................................................
COMPUTERSETTING .......................................................................
HOWTOUSETHE INFORMATIONCD .............................................
ADJUSTINGTHEVIEWINGANGLE .................................................
4
4
5
5
5
6
7
8
8
9
OPERATINGTHEMONITOR ................................................................... 10
ADJUSTMENTMENUCONTENTS .................................................... 11
SCREENADJUSTMENTS ................................................................. 15
POWERMANAGEMENTFEATURE .................................................. 17
TROUBLESHOOTING ............................................................................ 18
APPENDIX .............................................................................................. 20
SPECIFICATIONS: ProLite E383-W1X / E383-B1X / E383-S1X ....... 20
SPECIFICATIONS: ProLite E383S-W1X / E383S-B1X / E383S-S1X .. 21
SPECIFICATIONS: ProLite E383-W2X / E383-B2X / E383-S2X ..... 22
SPECIFICATIONS: ProLite E383S-W2X / E383S-B2X / E383S-S2X .. 23
COMPLIANTTIMING ......................................................................... 24
CONNECTORPINASSIGNMENT ...................................................... 24
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
FOR YOUR SAFETY
1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
<ProLite E383S>
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
OTHERS
ERGONOMICRECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
2
FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position.
„
Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
„
„
„
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing the image or turning off the
Power Switch for hours.
„
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
„ The fluorescent light used in the LCD monitor may have to be periodically replaced.
NOTE
For the warranty coverage on this component, please check with local iiyama
service center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
„
CLEANING
WARNING
CAUTION
NOTE
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
„
„ For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
„ To protect the LCD panel, do not scratch or rub the screen with a hard object.
„ Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Spray-type cleaner
Wax
Thinner
Benzine
Acid or Alkaline solvent
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
„
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
CABINET
LCD
Periodic cleaning with a soft dry cloth is recommended.
SCREEN
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY
3
BEFORE YOU OPERATE THE MONITOR
FEATURES
‹ 38cm (15.0") TFT Color LCD Monitor
‹ Supports Resolutions up to 1024 × 768
‹ High Contrast 400:1 / High Brightness 250cd/m2 / Quick Response Time 16ms
ProLite E383-W1X / E383-B1X / E383-S1X
ProLite E383S-W1X / E383S-B1X / E383S-S1X
High Contrast 500:1 / High Brightness 250cd/m2
ProLite E383-W2X / E383-B2X / E383-S2X
ProLite E383S-W2X / E383S-B2X / E383S-S2X
‹ 19.8mm Narrow Bezel & Slim Design
‹ Multi-Color Control
Supports sRGB International Standard
‹ Gamma Control
Clear Display for Moving Pictures & Photographs
‹ Digital Character Smoothing
‹ Automatic Set-up
‹ ProLite E383S: Stereo Speakers
2 × 1.5W Stereo Speakers & Headphone Connector
‹ Economy Mode
Reduced Power Consumption
‹ Plug & Play VESA DDC1/2B Compliant
Windows® 95/98/2000/Me/XP Compliant
‹ Power Management (ENERGY STAR® and VESA DPMS Compliant)
‹ Ergonomic Design:
TCO ’03 and MPR 3 Approved:
ProLite E383-W1X / E383-S1X / E383S-W1X / E383S-S1X
TCO ’99 and MPR 3 Approved:
ProLite E383-B1X / E383S-B1X / E383-W2X / E383-B2X / E383-S2X
ProLite E383S-W2X / E383S-B2X / E383S-S2X
‹ VESA Mounting Standard (75mm×75mm) Compliant
4
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
„ Power Cable*
„ Stand
„ D-Sub Signal Cable
„ Information CD
„ Quick Start Guide
For ProLite E383S
„ Audio Cable
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a
power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used.
CAUTION
*
However, all guarantees and warranties are void for any problems or damage caused
by a power cable not supplied by iiyama.
OPTIONAL PARTS
Optional parts as below are available for your LCD monitor. Please contact your local iiyama dealer
or regional iiyama office for more details. The Protection Sheet may be attached to the LCD panel
surface to protect it from stains or scratches.
„ Protection Sheet (Parts No. 832Z001-03)
INSTALLATION OF STAND
The monitor is designed to be used with the stand installed. Be sure to install the stand before
operating the monitor.
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
„
CAUTION
„
„
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
<Remove>
Hold the monitor and push the post
down into the stand.
Push the hooks in the direction of the arrows
and pull the stand away from the post.
BEFORE YOU OPERATE THE MONITOR
5
CONTROLS AND CONNECTORS
AC IN
LINE IN
D-SUB
<Front>
<Back>
Power Switch / Power Indicator (POWER)
A
Green: Normal operation (ProLite E383 / ProLite E383-B / ProLite E383-S /
ProLite E383S)
NOTE
Blue:
Orange: Power Management
The monitor enters into power management mode which reduces the power
Normal operation (ProLite E383S-B / ProLite E383S-S)
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
Auto Button (AUTO)
B
See page 12 for Auto Set-up.
Exit / Volume* Button (EXIT /
)
C
D
E
F
G
H
I
J
+ / Brightness Button ( + /
– / Contrast Button ( – /
Menu Button (MENU)
Headphone Connector*
Speakers*
)
)
AC Connector (AC IN)
Audio Connector (LINE IN)
K D-sub mini 15pin Connector (D-SUB)
L Keyhole for Security Lock
NOTE
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
*Available for ProLite E383S only
6
BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
A
B
Connect the computer to the monitor with the signal cable. (See page 24 for CONNECTOR PIN
ASSIGNMENT.)
*
Connect the monitor to the audio equipment with the Audio Cable when using the audio features.
C
D Connect the Power Cable to the monitor first and then to the power supply.
NOTE „ The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama office.
„ For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama office for a suitable adaptor.
„ Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
*Available for ProLite E383S only
BEFORE YOU OPERATE THE MONITOR
7
COMPUTER SETTING
„ Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
„ Windows 95/98/2000/Me/XP Plug & Play
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs
on Windows 95/98/2000/Me/XP by connecting the monitor to DDC1/2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The Monitor Information File for iiyama monitors
may be necessary. For installing procedure, see “Driver File” on the Information CD.
„ Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
NOTE
For further information, please contact your computer dealer first for advice.
HOW TO USE THE INFORMATION CD
z Windows
The Information CD runs automatically when you insert the CD into your computer.
z Macintosh
The Information CD will not run automatically when you insert the CD into your computer. Please
click the file “INDEX.HTML” on the Information CD.
z Software Requirements
„ The Information CD is optimized for Microsoft® Internet Explorer (version 5.5 or greater).
„ The contents may not be displayed properly with Netscape or other web browsers.
„ The Information CD is not guaranteed to run under the Linux OS. Please read the file
“FOR_LINUX.TXT” for more information.
„ Press the [Alt] & [Tab] keys together to display the [Monitor Check] screen if the menu page
does not appear in front of the test pattern when using the Adjustment Program.
„ You will not see the opening image if Macromedia® Flash Player™ is not installed on your
computer. For full functionality please download the latest version from:
„ You will not be able to read the user manual if Adobe® Acrobat® Reader™ is not installed on your
computer. Instructions to install the Reader can be found on the Information CD by clicking on
the “User Manual” tab and reading “Get Acrobat Reader.”
z Language Selection
The Menu is in English on start-up. Select your language from “Select your language” pull-down
menu.
Linux is written and distributed under the GNU General Public License and its source code is freely-distributed and
available to the general public.
8
BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE VIEWING ANGLE
„ For optimal viewing it is recommended to look at the full face
of the monitor.
„ Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
„ You are able to adjust the monitor’s angle up to 0-25 degrees
backward.
„ In order to ensure a healthy and relaxed body position when
using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10 degrees. Adjust the monitor’s angle to your own preference.
NOTE „ Do not touch the LCD screen when you change the
angle. It may cause damage or break the LCD screen.
„ Careful attention is required not to catch your fingers
or hands when you change the angle.
BEFORE YOU OPERATE THE MONITOR
9
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 24. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.
Press the Menu Button to start the On Screen Display feature. There are
additional Menu pages which can be switched by using the +/– Buttons.
Displayed while sRGB is active.
Displayed while Lockout is active.
Displayed while Mute is active.
Displayed while Economy Mode is active.
1
sRGB
LOCK
Menu:1
Page no.
Adjustment icon
Current horizontal frequency,
vertical refresh rate
and resolution
1024 × 768
H: 60.0 KHz V: 75.0 Hz
Select the Menu page which contains the adjustment icon relating to the
adjustment you want to make. Press the Menu Button again. Then, use the
+/– Buttons to highlight the desired adjustment icon. Press the Menu Button
again.
B
C
Use the +/– Buttons to make the appropriate adjustment or setting.
For example, to correct for vertical position, select Menu page number 1 and then press the Menu
Button. Then, select
(V-Position) by using the +/– Buttons.
An adjustment scale appears after you press the Menu Button. Use the +/– Buttons to change the
vertical position settings. The vertical position of the overall display should be changing accordingly
while you are doing this.
V-Position
The bar shows
the progress of the
+
–
adjustment being made.
NOTE
The On Screen Display disappears several seconds after you stop pressing the buttons while
performing an adjustment. The Exit Button can be used to exit OSD window immediately.
„
„ Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
„
Adjustments for Clock, Phase and Position are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
10 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Menu : 1
Menu:1
1024 × 768
H: 60.0 KHz V: 75.0 Hz
Adjustment Item
Brightness *1
Problem / Option
Button to Press
Too dark
Direct
Too bright
Too dull
Direct
Contrast
Too intense
Clock *2
To correct flickering text or lines
Phase *2
To correct flickering text or lines
Too low
Too high
V-Position
H-Position
Too far to the left
Too far to the right
Return to Menu
Highlight “Menu : 1” again.
1
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
2
*
See page 15 for SCREENADJUSTMENTS.
Direct
You can skip the Menu pages and display an adjustment scale directly by using the
following button operations.
z Brightness: Press the Brightness Button when the Menu is not displayed.
z Contrast:
Press the Contrast Button when the Menu is not displayed.
OPERATING THE MONITOR 11
Menu : 2
Menu:2
1024 × 768
H: 60.0 KHz V: 75.0 Hz
Adjustment Item
Problem / Option
Button to Press
NO
Return to Menu.
Auto Set-up *3
Adjust Clock, Phase, V-Position and H-Position
automatically.
YES
Direct
The Auto Set-up is not performed when the
Off
Setting
signal input is changed.
Adjust Clock, Phase, V-Position and H-Position
automatically when the signal input is changed.
On
NOTE „ The brightness of screen varies for several seconds during the adjustment.
„ This function is not performed automatically when changing the signal input because
the factory-preset of “Setting” in Auto Set-up is set to Off.
1
2
Color 1: 9300K
Color 2: 7500K
Color 3: 6500K
sRGB
Color Temp.
3
s
R
G
B
Too weak
Too strong
(User)
NOTE „ sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
„ You can not adjust the Gamma and Economy Mode during sRGB mode because those
settings are locked.
„
is displayed while sRGB is active.
Sharpness
1 2 3 4 5
Adjust the picture quality at resolutions of less than 1024 × 768.
You can change the picture quality from 1 to 5 (sharp to soft).
Press the + Button to change the picture quality in numerical
order. Press the – Button to change the picture quality in reverse
numerical order.
3
*
For best results, use the Auto Set-up in conjunction with the adjustment pattern. See page 15 for
SCREENADJUSTMENTS.
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
z Auto Set-up: Press the Auto Button when the Menu is not displayed.
12 OPERATING THE MONITOR
Menu : 2
Adjustment Item
Problem / Option
Off
Gamma
Mode1
Mode2
High contrast
Dark
Off
Normal
Economy Mode
Mode1
Mode2
Brightness of back-light is reduced.
Brightness of back-light is reduced more than Mode1.
Direct
NOTE
„
is displayed while Economy Mode is active.
Return to Menu
Highlight “Menu : 2” again.
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
z Economy Mode: When OSD menu is off, holding the Menu button for 1-2 seconds will toggle the
Economy Mode switch Off, Mode1 and Mode2.
OPERATING THE MONITOR 13
Menu : 3
Menu:3
1024 × 768
H: 60.0 KHz V: 75.0 Hz
Problem / Option
Button to Press
Adjustment Item
Too soft
Too loud
Direct
Volume *
NOTE
„
is displayed while Mute is active.
1 2 3 4 5
OSD Position
You can move the OSD display area
to any one of the following 5 positions
within the overall display:
Press the + Button to move the OSD in numerical order. Press
the – Button to move the OSD in reverse numerical order.
English
Deutsch
Français
Español
Italiano
English
German
French
Spanish
Italian
Language
Japanese
Off
On
Lockout is canceled.
Lockout
All adjustment items except this function are
locked out.
NOTE
„
is displayed while Lockout is active.
NO
Return to Menu.
Reset
YES
Factory-preset data is restored.
Return to Menu
Highlight “Menu : 3” again.
*Available for ProLite E383S only
Direct
You can skip the Menu pages and display an adjustment scale directly by using the following button
operations.
z Volume: Press the Volume Button when the Menu is not displayed.
Holding the Volume Button for 1-2 seconds will switch the Mute function between
ON and OFF.
14 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
„ The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
„ The monitor is designed to provide the best performance at resolution of 1024 × 768, but can not
provide the best at resolutions of less than 1024 × 768 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1024 × 768 in normal use.
„ Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
„ It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
„ Perform adjustments after a warm-up period of at least thirty minutes.
„ Additional adjustments may be required after the Auto Set-up depending on the resolution or signal
timing.
„ The Auto Set-up may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Clock, Phase and
Position. The other way is performing each adjustment manually.
Perform the Auto Set-up first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Set-up, manual adjustments are required. Both adjustments should be made by
using the screen adjustment patterns in the Adjustment Program on the Information CD.
This manual explains adjustment under Windows 95/98/2000/Me/XP.
Start “Adjustment Program” in the Information CD.
A
B
Select the resolution for your monitor - the adjustment pattern then appears.
[Adjustment pattern]
Color bar
Zebra pattern
Picture frame
16-level gray scale
OPERATING THE MONITOR 15
Press the Auto Button (Auto Set-up)
C
D
Adjust the image manually by following procedure below when the screen has a
flicker or blur, or the picture does not fit in the display area after performing the Auto
Set-up.
Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
E
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
F
Select “Position” in the Adjustment Program and adjust the V-Position and H-Position
so that the frame of the cross-hatch pattern fits into the display area.
G
NOTE „ When the left side of the picture frame moves away from the left edge of the display
area during the Clock adjustment, adjust Clock and H-Position alternately.
„ Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
„ The picture may flicker during the Clock, V-Position and H-Position adjustment.
„ In case the picture frame is bigger or smaller than the data display area after the Clock
adjustment, repeat steps from
.
C
„ In the case that a strong flicker or blurs remain on a part of the screen, repeat the
adjustments from to readjust the Clock. If the flicker or blurs still remain then set the
E
refresh rate to 60Hz and repeat the adjustments from step
.
C
„ Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
16
OPERATING THE MONITOR
Select “Brightness” in the Adjustment Program and adjust the Brightness and
Contrast so that all 16 levels of gray in the grayscale pattern are visible.
Click on “FINISH” to close the Adjustment Program.
H
POWER MANAGEMENT FEATURE
The power management feature of this product complies with every power saving requirement of
ENERGY STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power
consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management function,
including any timer settings is configured by the operating system. Check your operating system
manual for information on how this can be configured.
Power Management Mode
„
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less than
2W. The screen becomes dark, and the power indicator turns to orange. From Power Management
Mode, the image reappears in several seconds when either the keyboard or the mouse are
touched again.
Power Indicator
Green/
Blue
NORMAL MODE
POWER MANAGEMENT MODE
Orange
POWER
0
2W
100%
CONSUMPTION
NOTE
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
„
„
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
TROUBLE SHOOTING 17
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for
further assistance.
Problem
Check
The picture does
not appear.
A
(Power indicator
does not light up.)
† The Power Cable is firmly seated in the socket.
† The Power Switch is turned ON.
† The AC socket is live. Please check with another piece of equipment.
(Power indicator
is green/blue.)
† If the blank screen saver is in active mode, touch the keyboard or the
mouse.
† Increase the Contrast and/or Brightness.
The computer is ON.
†
† The Signal Cable is properly connected.
† The signal timing of the computer is within the specification of the monitor.
(Power indicator † If the monitor is in power management mode, touch the keyboard or the
is orange.)
mouse.
The computer is ON.
†
† The Signal Cable is properly connected.
†
The signal timing of the computer is within the specification of the monitor.
The screen is not † The Signal Cable is properly connected.
B
synchronized.
† The signal timing of the computer is within the specification of the monitor.
† The video output level of the computer is within the specification of the
monitor.
The screen
position is not in
the center.
† The signal timing of the computer is within the specification of the monitor.
C
D
E
The screen is
too bright or too
dark.
† The video output level of the computer is within the specification of the
monitor.
† The power voltage is within the specification of the monitor.
† The signal timing of the computer is within the specification of the monitor.
The screen is
shaking.
18
OPERATING THE MONITOR
Problem
No sound.
Check
† The audio equipment (computer etc.) is ON.
† The Audio Cable is properly connected.
† The Volume is turned up.
*F
† The Mute is OFF.
† The audio output level of the audio equipment is within the specification of
the monitor.
The sound is too † The audio output level of the audio equipment is within the specification of
*G
loud or too quiet.
the monitor.
A strange noise is
heard.
†
The Audio Cable is properly connected.
*H
*Availabele for ProLite E383S only
TROUBLE SHOOTING 19
APPENDIX
SPECIFICATIONS: ProLite E383-W1X / E383-B1X / E383-S1X
LCD Panel Driving system
a-Si TFT Active Matrix
Diagonal: 38cm / 15.0"
0.297mm H × 0.297mm V
250cd/m2 (Typical)
Size
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
400 : 1 (Typical)
Right / Left : 65 degrees each , Up:45 degrees,Down:55 degrees
16ms (Black, white, black)
Approx.16.2 million
Display Colors
Sync Frequency
Dot Clock
Horizontal 24.0-60.0kHz, Vertical 55-75Hz
80MHz maximum
Maximum Resolution
1024 × 768, 0.8 MegaPixels
D-Sub mini 15pin
Input Connector
Plug & Play
VESA DDC1/2BTM
Separate sync: TTL, Positive or Negative
Analog: 0.7Vp-p (Standard), 75Ω, Positive
304.1mm W × 228.1mm H / 12.0" W × 9.0" H
100-240VAC, 50/60Hz, 1.5A
Input Sync Signal
Input Video Signal
Maximum Screen Size
Power Source
Power Consumption
Dimensions / Net Weight
25W maximum, Power management mode: 2W maximum
345 × 341 × 173.5mm / 13.6 × 13.4 × 6.8" (W×H×D), 3.0kg / 6.6lbs
25 degrees (Up: 0-25 degrees)
Tilt Angle
Operating: Temperature
Humidity
Environmental
Considerations
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Storage: Temperature
Humidity
Approvals ProLite E383-W1X
ProLite E383-S1X
TCO ’03, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
UL / C-UL, VCCI-B
TCO ’99, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
ProLite E383-B1X
UL / C-UL, VCCI-B
345mm/13.6"
305.5mm/12.0"
52mm/2.0"
194mm/7.6"
20
APPENDIX
SPECIFICATIONS: ProLite E383S-W1X / E383S-B1X / E383S-S1X
LCD Panel Driving system
a-Si TFT Active Matrix
Diagonal: 38cm / 15.0"
0.297mm H × 0.297mm V
250cd/m2 (Typical)
Size
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
400 : 1 (Typical)
Right / Left : 65 degrees each , Up:45 degrees,Down:55 degrees
16ms (Black, white, black)
Display Colors
Approx.16.2 million
Sync Frequency
Dot Clock
Horizontal 24.0-60.0kHz, Vertical 55-75Hz
80MHz maximum
Maximum Resolution
1024 × 768, 0.8 MegaPixels
D-Sub mini 15pin
VESA DDC1/2BTM
Input Connector
Plug & Play
Input Sync Signal
Input Video Signal
Input Audio Connector
Input Audio Signal
Speakers
Separate sync: TTL, Positive or Negative
Analog: 0.7Vp-p (Standard), 75Ω, Positive
ø 3.5mm mini jack (Stereo)
0.7Vrms maximum
1.5W × 2 (Stereo speakers)
ø 3.5mm mini jack (Stereo)
Headphone Connector
Maximum Screen Size
304.1mm W × 228.1mm H / 12.0" W × 9.0" H
Power Source
100-240VAC, 50/60Hz, 1.5A
Power Consumption
30W maximum, Power management mode: 2W maximum*
Dimensions / Net Weight
345 × 341 × 173.5mm / 13.6 × 13.4 × 6.8" (W×H×D), 3.0kg / 6.6lbs
25 degrees (Up: 0-25 degrees)
Tilt Angle
5 to 35°C / 41 to 95°F
Operating: Temperature
Humidity
Storage: Temperature
Humidity
Environmental
Considerations
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals
TCO ’03, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
ProLite E383S-W1X
ProLite E383S-S1X
UL / C-UL, VCCI-B
TCO ’99, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
ProLite E383S-B1X
UL / C-UL, VCCI-B
345mm/13.6"
52mm/2.0"
NOTE
305.5mm/12.0"
*Condition: Audio equipment
is not connected.
194mm/7.6"
APPENDIX 21
SPECIFICATIONS: ProLite E383-W2X / E383-B2X / E383-S2X
LCD Panel Driving system
a-Si TFT Active Matrix
Diagonal: 38cm / 15.0"
0.297mm H × 0.297mm V
250cd/m2 (Typical)
Size
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
500 : 1 (Typical)
Right / Left : 60 degrees each , Up:45 degrees,Down:55 degrees
25ms (Black, white, black)
Approx.16.2 million
Display Colors
Sync Frequency
Dot Clock
Horizontal 24.0-60.0kHz, Vertical 55-75Hz
80MHz maximum
Maximum Resolution
1024 × 768, 0.8 MegaPixels
D-Sub mini 15pin
Input Connector
Plug & Play
VESA DDC1/2BTM
Separate sync: TTL, Positive or Negative
Analog: 0.7Vp-p (Standard), 75Ω, Positive
304.1mm W × 228.1mm H / 12.0" W × 9.0" H
100-240VAC, 50/60Hz, 1.5A
Input Sync Signal
Input Video Signal
Maximum Screen Size
Power Source
Power Consumption
Dimensions / Net Weight
25W maximum, Power management mode: 2W maximum
345 × 341 × 173.5mm / 13.6 × 13.4 × 6.8" (W×H×D), 3.0kg / 6.6lbs
25 degrees (Up: 0-25 degrees)
Tilt Angle
Operating: Temperature
Humidity
Environmental
Considerations
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Storage: Temperature
Humidity
Approvals
TCO ’99, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
UL / C-UL, VCCI-B
345mm/13.6"
305.5mm/12.0"
52mm/2.0"
194mm/7.6"
22
APPENDIX
SPECIFICATIONS: ProLite E383S-W2X / E383S-B2X / E383S-S2X
LCD Panel Driving system
a-Si TFT Active Matrix
Diagonal: 38cm / 15.0"
0.297mm H × 0.297mm V
250cd/m2 (Typical)
Size
Pixel pitch
Brightness
Contrast ratio
Viewable angle
Response time
500 : 1 (Typical)
Right / Left : 60 degrees each , Up:45 degrees,Down:55 degrees
25ms (Black, white, black)
Display Colors
Approx.16.2 million
Sync Frequency
Dot Clock
Horizontal 24.0-60.0kHz, Vertical 55-75Hz
80MHz maximum
Maximum Resolution
1024 × 768, 0.8 MegaPixels
D-Sub mini 15pin
VESA DDC1/2BTM
Input Connector
Plug & Play
Input Sync Signal
Input Video Signal
Input Audio Connector
Input Audio Signal
Speakers
Separate sync: TTL, Positive or Negative
Analog: 0.7Vp-p (Standard), 75Ω, Positive
ø 3.5mm mini jack (Stereo)
0.7Vrms maximum
1.5W × 2 (Stereo speakers)
ø 3.5mm mini jack (Stereo)
Headphone Connector
Maximum Screen Size
304.1mm W × 228.1mm H / 12.0" W × 9.0" H
Power Source
100-240VAC, 50/60Hz, 1.5A
Power Consumption
30W maximum, Power management mode: 2W maximum*
Dimensions / Net Weight
345 × 341 × 173.5mm / 13.6 × 13.4 × 6.8" (W×H×D), 3.0kg / 6.6lbs
25 degrees (Up: 0-25 degrees)
Tilt Angle
5 to 35°C / 41 to 95°F
Operating: Temperature
Humidity
Storage: Temperature
Humidity
Environmental
Considerations
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals
TCO ’99, CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2, FCC-B,
UL / C-UL, VCCI-B
*Condition: Audio equipment is not connected.
NOTE
345mm/13.6"
305.5mm/12.0"
52mm/2.0"
194mm/7.6"
APPENDIX 23
COMPLIANT TIMING
Horizontal
Frequency
31.469kHz
37.500kHz
37.861kHz
35.156kHz
37.879kHz
46.875kHz
48.077kHz
48.363kHz
56.476kHz
60.023kHz
31.469kHz
35.000kHz
49.725kHz
24.827kHz
Vertical
Frequency
59.940Hz
75.000Hz
72.809Hz
56.250Hz
60.317Hz
75.000Hz
72.188Hz
60.004Hz
70.069Hz
75.029Hz
70.087Hz
66.667Hz
74.500Hz
56.424Hz
Dot Clock
Video Mode
25.175MHz
31.500MHz
31.500MHz
36.000MHz
40.000MHz
49.500MHz
50.000MHz
65.000MHz
75.000MHz
78.750MHz
28.322MHz
30.240MHz
57.283MHz
21.053MHz
VGA
640 × 480
SVGA 800 × 600
VESA
1024 × 768
XGA
VGA TEXT
720 × 400*
640 × 480
832 × 624
640 × 400*
Macintosh
PC9801
NOTE
* The screen is stretched vertically because the screen size ratio is not 4:3.
CONNECTOR PIN ASSIGNMENT
„ D-Sub mini 15pin
Input Signal
Pin
1
Input Signal
Pin
Connector
Red video
9
2
10 Ground
Green video
11
3
Blue video
Reserved port
4
Reserved port
Ground
12 Data line (SDA)*
13 H-Sync
5
6
Red video ground
Green video ground
Blue video ground
V-Sync
14
15
7
Clock line (SCL)*
* Compliant to VESA DDC.
8
24
APPENDIX
|