Delta Series
Quick Start Guide
|
2
Delta Series Quick Start Guide
2. Follow the driver installer’s on-screen directions.
2
3. At various points in this installation process, you may be
notified that the driver being installed has not passed
2
Windows Logo Testing . Click “Continue Anyway” to
proceed with the installation.
4. Once the driver installer has completed, select “Yes, I
want to shutdown my computer now” and click “Finish”.
5. When your computer has turned off, disconnect the AC
power cable and open your computer’s case.
6. Touch your computer’s metal chassis to ground yourself
before coming in contact with any electronic components
inside the computer. Uncontrolled discharge of excess
static electricity may cause damage to electronic
components.
7. Each unused PCI slot should have a metal bracket that
covers the slot’s accompanying access hole on the rear of
the computer. Select one available PCI slot and remove
its metal bracket. Be sure to save the bracket screw
(brackets are usually held in place by one screw) as you
will need it later.
TIP: Certain PCI slots on your motherboard may be sharing resources with some of your computer’s other components (e.g.
the USB controller or the AGP slot). This may result in performance issues that are often difficult to pin down and resolve. As a
preventive measure, please check your motherboard’s documentation in order to find an available PCI slot that does NOT internally
share resources.
|
3
Delta Series Quick Start Guide
8. Insert your Delta PCI card into your chosen PCI slot.
3
Secure the Delta PCI card in place using the bracket
screw that was mentioned in the previous step. Close the
computer case.
9. If your interface includes an external breakout box, attach
it to the Delta PCI card using the supplied Host Adapter
cable. If your external breakout box comes with a power
adapter, connect it now. Finally, reconnect the computer’s
power cord and turn on the computer.
10. When Windows finishes booting, it will identify the new
Delta hardware and will ask if you want to search the
Internet for a driver. Select “No, not this time” and press
3
“Next”
.
4
11. Windows will display a “Found New Hardware” Wizard
.
12. Choose “Install software automatically” and click “Next”.
13. Once the wizard is completed, click “Finish”.
4
14. Once the installation is complete, you will see a message
stating, “Your new hardware is installed and ready to use”.
|
4
Delta Series Quick Start Guide
Mac OS X Installation
1. If possible, we recommend that you download the most
recent Delta drivers by going to the Support > Drivers
the newest drivers available. If you do not have Internet
access, insert the Delta Series CD-ROM into your
computer to install the drivers that came with your Delta
interface.
6. Touch your computer’s metal chassis to ground yourself
before coming in contact with any electronic components
inside the computer. Uncontrolled discharge of excess
static electricity may cause damage to electronic
components.
7. Each unused PCI slot should have a metal bracket that
covers the slot’s accompanying access hole on the rear of
the computer. Select one available PCI slot and remove
its metal bracket. Be sure to save the bracket screw
(brackets are usually held in place by one screw) as you
will need it later.
a. If you are installing drivers from the Delta Series
CD-ROM, a CD-ROM icon will appear on your
desktop once the disc is inserted into your computer.
Double-click this icon to view the contents of the
disc. Next, double-click “Open Me.” Finally, select
your Delta interface from the drop-down menu on the
welcome screen and click “Install”.
6. Insert your Delta PCI card into your chosen PCI slot.
Secure the Delta PCI card in place using the bracket
screw mentioned in the previous step. Close the
computer case.
the downloaded file should automatically mount and
display its contents on the desktop. If this file does
not mount automatically, simply double-click the file
once it has finished downloading to view its contents.
Next, double-click the installer package.
7. If your Delta interface features an external breakout box,
connect it to the Delta PCI card using the supplied Host
Adapter cable. If the breakout box includes a power
adapter, connect it now. Finally, reconnect the computer’s
power cord and turn on the computer.
2. Follow the driver installer’s on-screen instructions.
8. When the computer has restarted, your Delta interface will
be ready to use.
3. Click “Restart” once the installer has completed the
installation.
4. Once your machine has booted, shut down the computer
and disconnect its power cable.
5. Open your computer’s case.
|
5
Delta Series Quick Start Guide
Connecting Your Equipment to the Delta Interface
<
<
<
Each Delta interface has a unique number of inputs
and outputs which can be used for a variety of
purposes. By default, analog outputs 1 and 2 serve as
your “main” outputs. Connect channels 1 and 2 to the
left and right inputs of your mixer, powered speakers,
or other audio destination.
Mic
CD Player,
Keyboard,
Mixers, etc.
Guitar
All Delta interfaces accept line-level analog signals.
Connect your line-level instruments (Keyboards,
mixers, etc.) to any available analog input. If you wish to
record microphones or the direct output of an electric
guitar, bass, or other instrument-level device, you must
first raise the signal to line-level using a preamplifier.
Preamplifier
Inputs
1
4
4
3
3
2
2
1
If you own any devices with S/PDIF inputs or outputs,
connect these devices to the S/PDIF connectors on
the PCI Host Adapter Card or break-out cable (not
applicable for Delta 44).
1
1
Outputs
For more detailed information about all of the available
inputs and outputs, please refer to your Delta
interface’s User Guide located on the Delta Series
CD-ROM.
Sound System, Mixer, etc
|
6
Delta Series Quick Start Guide
Opening the Delta Series Control Panel
5
PC users can access the Delta Control Panel by double-clicking the M-Audio icon in the system tray . Mac OS X users can open the
6
Control Panel by clicking the M-Audio icon found in the System Preferences panel
the Applications folder.
or by double-clicking the M-Audio Delta link from
The default settings for the Delta Control Panel will ensure that your software’s
audio outputs 1/2 are routed to your Delta interface’s physical outputs 1/2,
while software outputs 3/4 are routed to the physical outputs 3/4, and so
on. However, the Control Panel will allow you to alter the output routings if
necessary as well as to configure various other options (digital sync source,
sample rate, buffer size, etc.) In many cases, there will be no need to change
the default settings.
5
PC: double-click the
M-Audio icon
6
When it’s time to record an external source, such as a vocal, guitar track, or
keyboard part, you will want to monitor your input. Monitoring will allow you to
hear the signal being fed into the inputs while blending it with the output signals
coming from the computer. This way, you can hear your own performance in the
headphones as you play along to previously recorded parts playing back from
your computer.
Start by selecting the Monitor Mixer radio button in the leftmost column of the
Control Panel’s Patchbay/Router tab. This routes the Monitor Mixer’s output to
the Delta interface’s physical outputs 1/2. You can now use the Monitor Mixer
to adjust and mix signals from the analog and digital inputs, as well as signals
entering the mixer from your audio software.
Mac: click the M-Audio icon found in the System
Preferences panel
Note: Adjusting the levels in the Monitor Mixer does not affect the actual level
of the signal being recorded into audio applications. Please adjust incoming
signal levels at the sound source.
For a full account of all Control Panel routings and functions, refer to the Delta
interface’s User Guide located on the Delta Series CD-ROM.
|
7
Delta Series Quick Start Guide
Additional Information and Support
support. We recommend checking this site periodically to ensure you have the latest drivers and most up-to-date information about
your M-Audio products.
Warranty Terms and Registration
Warranty Terms
M-Audio warrants products to be free from defects in materials and workmanship, under normal use and provided that the product is
Warranty Registration
Immediately registering your new M-Audio product entitles you to full warranty coverage and helps M-Audio develop and manufacture
the finest quality products available. Register online at www.m-audio.com/register to receive FREE product updates and for the
chance to win M-Audio giveaways.
|
8
Delta Series Quick Start Guide
© 2007 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and availability are subject
to change without notice. Avid, M-Audio and Delta are either trademarks or registered trademarks of Avid Technology, Inc. All other
trademarks contained herein are the property of their respective owners.
Delta Series
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
M-Audio USA
|
5795 Martin Rd., Irwindale, CA 91706
M-Audio Germany
Technical Support
|
Kuhallmand 34, D-74613 Ohringen, Germany
e-mail: [email protected]
tel: +49 (0)7941 - 9870030
fax: +49 (0)7941 98 70070
Technical Support
tel (pro products): (626) 633-9055
tel (consumer products): (626) 633-9066
fax (shipping): (626) 633-9032
e-mail: [email protected]
tel: +49 (0)7941 98 7000
fax: +49 (0)7941 98 70070
Sales
Web
e-mail: [email protected]
tel: 1-866-657-6434
fax: (626) 633-9070
Sales
Web
M-Audio Canada
|
1400 St-Jean Baptiste Ave. #150, Quebec City,
Quebec G2E 5B7, Canada
M-Audio U.K.
|
Floor 6, Gresham House, 53 Clarenden Road,Watford
WD17 1LA, United Kingdom
email: [email protected]
phone: (418) 872-0444
fax: (418) 872-0034
Technical Support
e-mail: [email protected]
tel: (Mac support): +44 (0)1765 650072
tel: (PC support): +44 (0)1309 671301
Technical Support
e-mail: [email protected]
phone: (866) 872-0444
fax: (418) 872-0034
Sales
Web
tel: +44 (0)1923 204010
fax: +44 (0)1923 204039
Sales
Web
M-Audio France
|
Floor 6, Gresham House, 53 Clarenden Road,Watford
WD17 1LA, United Kingdom
tel : 0 810 001 105
e-mail : [email protected]
Renseignements
Commerciaux
PC : 0 0820 000 731
MAC : 0 0820 391 191
Assistance Technique
Assistance Technique
Site Web
e-mail : [email protected]
fax : +33 (0)01 72 72 90 52
|
070209_DeltaSries_QSG_EN01
|