Philips HTM139 User Manual

HTM139  
DVD MicroTheatre  
user manual  
Index  
CAUTION  
Use of controls or adjustments or  
performance of procedures other  
than herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
ATTENTION  
L'utilisation des commandes ou  
réglages ou le non-respect des  
procédures ci-incluses peuvent se  
traduire par une exposition  
dangereuse à l'irradiation.  
ATENCIÓN  
El uso de mando o ajustes o la  
ejecucción de métodos que no sean  
los aquí descritos puede ocasionar  
peligro de exposición a radiación.  
3
Contents  
General Information  
Disc Operations  
Features .................................................................. 6  
Supplied accessories ............................................ 6  
Environment information ................................... 6  
Safety information ................................................ 7  
Maintenance .......................................................... 7  
Playable Discs ...................................................... 20  
Region Codes...................................................... 20  
Playing discs ......................................................... 21  
Using the Disc Menu.......................................... 21  
Using PBC feature (available for 2.0-version  
VCD only)  
Resuming playback...............................................21  
Selecting and searching .............................. 21~22  
Selecting a different track/chapter  
Fast forwarding/reversing  
GOTO  
Different play modes:  
REPEAT, SHUFFLE and REPEAT A-B .............. 22  
REPEAT  
SHUFFLE  
Connections  
Step1: Placing speakers and subwoofer ............8  
Step2: Connecting speakers and subwoofer.....8  
Step3: ConnectingTV set ............................ 9~10  
UsingVideo in jack (CVBS)  
Using ComponetVideo in jack (Pr PbY)  
Using S-Video in jack  
Using an accessory RF modulator  
Step4: Connecting the FM antenna ................ 11  
Step5: Connecting the power cord ................ 11  
Step6: Connecting aVCR or cable/satellite  
box......................................................................... .11  
Step7: Connecting digital audio equipment....12  
REPEAT A-B  
Programming favourite tracks ......................... 23  
Display information............................................ 23  
ZOOM.................................................................. 24  
AUDIO ................................................................. 24  
SUBTITLE............................................................. 24  
Playing a title........................................................ 24  
Playing MP3/WMA/JPEG disc .......................... 24  
Playing MP3 music and JPEG picture  
simultaneously.....................................................25  
Playing Kodak Picture disc ................................ 25  
Functional Overview  
Controls on the system .................................... 13  
Remote control ........................................... 14~15  
Getting Started  
Step 1: Using Remote Control ........................ 16  
Step 2: Setting up theTV ........................... 16~18  
Selecting the color system that matches  
your TV set  
Setting up Progressive Scan feature  
To deactivate Progressive manually  
Step 3: Setting language preference ................ 18  
Setting the OSD Language  
DVD MENU Operations  
Using the menu bar ........................................... 26  
Using setup menu (user preference settings)  
........... .............................................................. 27~29  
TV Display  
Screen Saver  
Night Mode  
TestTone  
Changing the password  
Restricting playback by setting parental level  
Rating explanations  
OSD language (menu lanuage)  
Default  
Setting the Audio, Subtitle and Disc Menu  
language  
Basic Functions  
Switching the system on/off ............................. 19  
Power saving automatic standby ..................... 19  
Volume control ................................................... 19  
Sound Control .................................................... 19  
DBB (Dynamic Bass Boost)  
DSC (Digital Sound Control)  
4
Contents  
Tuner  
Tuning to radio stations.......................................30  
Storing preset radio stations..............................30  
Manual programming.......................................30  
Automatic programming.................................30  
Listening to preset radio stations......................30  
Deleting a preset radio station..........................30  
Clock/Timer  
Viewing clock.........................................................31  
Setting clock...........................................................31  
Setting wake-up timer..........................................31  
Setting sleep timer................................................31  
Specifications ........................................... 32  
Troubleshooting ............................. 33~35  
Glossary......................................................... 36  
5
General Information  
IMPORTANT!  
Supplied accessories  
– Remote control with one CR2025 battery  
Two speakers and one subwoofer  
– AC power cord  
– DIN cable  
– Composite video cable (yellow)  
– FM wire antenna  
PLEASE NOTETHATTHE VOLTAGE  
SELECTOR LOCATED ATTHE REAR OF  
THIS SYSTEM IS PRESET AT 220V FROM  
THE FACTORY. FOR COUNTRIESTHAT  
OPERATE AT 110V-127V, PLEASE ADJUST  
TO 110V-127V BEFOREYOU SWITCH ON  
THE SYSTEM.  
– User Manual and Quick Start Guide  
If any item is damaged or missing, contact  
your retailer or Philips.  
Features  
Your DVD MICROTHEATRE System with 2.1-  
channel full analog amplifier creates the same  
dynamic sound qualities that you find in full  
fledged cinemas and incorporates some of the  
best features in home theater technology.  
Environmental information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
Other features include:  
Built-in Dolby Digital decoder, supporting  
Incredible Surround and DSC sound setting.  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old equipment.  
Additional Component Connections  
Lets you connect other audio and audio/visual  
components to the DVD micro system.  
Night Mode  
Lets you compress the dynamic range, reducing  
the difference in loudness between different  
sounds in Dolby Digital mode.  
Parental Control (Rating Level)  
Lets you set a ratings level so that your children  
cannot watch a DVD that has a rating higher  
than you set.  
Sleep/Wake-upTimer  
Enables the system to switch on/off automatically  
at a preset time.  
Progressive Scan  
Provides high quality flicker-free images for film  
based sources.When a picture refreshes, its  
vertical resolution can double to 525 lines.  
Note:  
– To fully enjoy the progressive scan feature, you  
need a progressive scanTV.  
6
General Information  
Safety information  
Maintenance  
Before operating the system, check that the  
operating voltage indicated on the typeplate (or  
the voltage indication beside the voltage  
selector) of your system is identical with the  
voltage of your local power supply. If not, please  
consult your dealer.  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the center  
out, in a straight line.  
Do not expose the player,  
batteries or discs to humidity,  
Place the system on a flat, hard and stable  
surface.  
rain, sand or excessive heat  
(caused by heating equipment or direct sunlight).  
Always keep the disc tray closed to avoid dust  
on the lens.  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system. Allow at least 10 cm (4 inches)  
clearance from the rear and the top of the unit  
and 5 cm (2 inches) from each side.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers, table-cloths, curtains, etc.  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
Do not use solvents such as benzene, thinner,  
commercially available cleaners, or anti-static  
spray intended for colour discs.  
The lens may cloud over when the player is  
suddenly moved from cold to warm  
surroundings, making it impossible to play a disc.  
Leave the player in the warm environment until  
the moisture evaporates.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens of the disc  
unit inside the system. Should this occur, the CD  
player would not operate normally. Leave the  
power on for about one hour with no disc in the  
system until normal playback is possible.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
When the system is switched to Standby  
mode, it is still consuming some power.  
To disconnect the system from the  
power supply completely, remove the AC  
power plug from the wall socket.  
7
Connections  
Step 1: Placing speakers and  
subwoofer  
Step 2: Connecting speakers  
and subwoofer  
NA  
)  
For best possible surround sound, locate your  
speakers and subwoofer as follows:  
Connect the supplied DIN cable to DVD player’s  
DIN jack and the left speaker’s DIN jack.  
Place the left and right speakers at equal  
distances from theTV set and at an angle of  
approximately 45 degrees from the listening  
position.  
Connect the supplied speaker wires of the right  
speaker to SPEAKER RIGHT on the left speaker,  
red wire to red jack ( “+” ), black wire to black  
jack ( “-“ ). Fully insert the stripped portion of  
the speaker wire into the terminal as shown.  
Place the subwoofer on the floor.  
Notes:  
– To avoid magnetic interference, position the  
speakers, subwoofer as far as possible from the  
main unit,TV set or other radiation source.  
– Allow adequate ventilation around the DVD  
System.  
Connect the supplied speaker wire of the  
subwoofer to SUBWOOFER OUT on the left  
speaker, green wire to green jack ( “+” ), white  
wire to white jack ( “-” ).  
IMPORTANT!  
The type plate is located on the bottom  
of the system.  
To avoid overheating of the system, a  
safety circuit has been built in. Therefore,  
your system may switch to Standby  
mode automatically under extreme  
conditions. If this happens, let the system  
cool down before reusing it.  
Notes:  
– For optimal sound performance, use the  
supplied speakers.  
– Do not connect more than one speaker to any  
one pair of +/- speaker terminals.  
– Do not connect speakers with an impedance  
lower than the speakers supplied. Please refer to  
the SPECIFICATIONS section of this manual.  
8
Connections  
Using componentVideo In jack (Pr PbY)  
Step 3: ConnectingTV set  
Use the component video cables (red/blue/  
green, not supplied) to connect the system’s PR/  
PB/Y jacks to the corresponding Component  
video input jacks (or labeled as Pr/Cr Pb/CbY or  
YUV) on theTV set.  
IMPORTANT!  
You only need to make one video  
connection from the following options,  
according to the capabilities of yourTV  
system.  
– S-Video or ComponentVideo  
connection provides higher picture  
quality. These options must be available  
on yourTV set.  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN (L/R) jacks to the  
corresponding AUDIO OUT jacks on theTV set.  
Or, to listen to disc playback of the system  
through yourTV, use the audio cables (white/red,  
not supplied) to connect LINE OUT (L/R)  
jacks to the corresponding AUDIO IN jacks on  
theTV set.  
– Connect the system directly to theTV  
set.  
Using Video In jack (CVBS)  
ANTENNA  
FM  
(75)  
ANTENNA  
FM  
(75)  
Use the supplied composite video cable (yellow)  
to connect the system’s COMPOSITE  
VIDEO jack to the video input jack (or labeled  
as A/V In,Video In, Composite or Baseband) on  
theTV set.  
Notes for progressive scan video:  
– The progressive scan video quality is only  
possible when usingY Pb Pr, and a progressive scan  
TV is required.  
– If you are using a Progressive ScanTV (TV must  
indicate Progressive Scan or ProScan capability), to  
activateTV Progressive Scan, please refer to yourTV  
user manual. For DVD system’s Progressive Scan  
function, see “Getting Started - Setting up  
Progressive Scan feature’’.  
– If yourTV does not support Progressive Scan, you  
will not be able to view the picture.Turn off  
progressive scan in PROGRESSIVE menu of the  
system setup menu.  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN (L/R) jacks to the  
corresponding AUDIO OUT jacks on theTV set.  
Or, to listen to disc playback of the system  
through yourTV, use the audio cables (white/red,  
not supplied) to connect LINE OUT (L/R)  
jacks to the corresponding AUDIO IN jacks on  
theTV set.  
9
Connections  
Using S-Video In jack  
Using an accessory RF modulator  
IMPORTANT!  
– If yourTV set only has a single  
Antenna In jack (or labeled as 75 ohm or  
RF In), you will need a RF modulator in  
order to view the DVD playback viaTV.  
See your electronics retailer or contact  
Philips for details on RF modulator  
availability and operations.  
ANTENNA  
FM  
(75)  
Use the S-Video cable (not supplied) to connect  
the system’s S-VIDEO jack to the S-Video  
input jack (or labeled asY/C or S-VHS) on the  
TV set.  
ANTENNA  
FM  
(75)  
To listen toTV channels through this system, use  
the audio cables (white/red, not supplied) to  
connect AUX IN (L/R) jacks to the  
Use the supplied composite cable (yellow) to  
connect the system’s COMPOSITEVIDEO  
jack to the video input jack on the RF modulator.  
Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s RF jack.  
corresponding AUDIO OUT jacks on theTV set.  
Or, to listen to disc playback of the system  
through theTV, use the audio cables (white/red,  
not supplied) to connect LINE OUT (L/R)  
jacks to the corresponding AUDIO IN jacks on  
theTV set.  
10  
Connections  
Step 4: Connecting the FM  
antenna  
Step 6: Connecting aVCR or  
cable/satellite box  
Connect the supplied FM antenna to the FM (75  
) jack at the back of the main unit. Extend the  
FM antenna and fix its end to the wall.  
Viewing and listening to playback  
Step 5: Connecting the power  
cord  
IMPORTANT!  
Never make or change any  
connection with the power switched on.  
ANTENNA  
FM  
(75)  
NTENNA  
FM  
(75)  
1 Connect theVCR or Cable/Satellite Box to the  
TV system as shown.  
2 Using the audio cables (red/white, not supplied)  
Connect the system’s AUX IN (L/R) jacks to  
the AUDIO OUT jacks on theVCR or Cable/  
Satellite box.  
After everything is connected properly, plug in  
the AC power cord to the power socket.  
Before starting operation, press AUX on the  
remote control to select “AUX” in order to  
activate the input source.  
Using theVCR for recording DVDs  
Some DVDs are copyright-protected.You cannot  
record or dub protected discs using aVCR.  
3 Connect the system’s COMPOSITEVIDEO  
jack to theVIDEO IN jack on theVCR.  
4 Connect the system’s LINE OUT (R/L) jacks  
to the AUDIO IN jacks on theVCR. This will  
allow you to make analog stereo (two channel,  
right and left) recording.  
To view DVD playback while recording  
You must connect the system to yourTV system  
using the S-VIDEO (as shown above) or the  
COMPONENTVIDEO OUT (Pr PbY)  
video connection.  
11  
Connections  
Step 7: Connecting digital audio  
equipment  
ANTENNA  
FM  
(75)  
DVD player  
Digital audio recorder  
Recording (digital)  
Connect the system’s COAXIAL OUT (digital  
out) jack to the DIGITAL IN jack on a digital  
recording device (DTS-DigitalTheater System  
compatible, with a Dolby Digital decoder, for  
example).  
Before operation, set COAXIAL OUTPUT  
according to the audio connection.  
12  
Functional Overview  
1
2
7
8
9
3
0
!
Y
4
5
6
6 iR Sensor  
point the remote control towards this sensor.  
7 OPEN/CLOSE  
opens or closes the disc door.  
8 PROGRAM  
ForVCD/CD only: program the favourite tracks  
9 MODE  
selects various repeat play modes (For VCD  
with PBC feature, PBC must be turned off.)  
0 VOLUME +/-  
adjusts the volume upward/downward.  
! Display  
shows the current status of the DVD player.  
Controls on the system  
1 DBB  
enables or disables bass enhancement.  
2 DSC  
selects different types of preset sound equalizer  
settings (CLASSIC, ROCK, JAZZ or POP).  
3 TUNING à / á  
Tuner...............tunes to a radio station  
Disc................ fast searches backward/forward in  
a disc at different speeds.  
Clock.............sets the minutes  
4 STANDBY-ON B  
switches the system on or to standby mode.  
5 ÉÅ  
starts or interrupts disc playback  
SOURCE  
selects the respective sound source: DVD, FM or  
AUX.  
¡ / ™  
Disc................press to skip to the previous/next  
chapter/title/track.  
Tuner..............selects a preset radio station  
Clock..............sets the hours  
9
stops disc playback or erases a program.  
13  
Functional Overview  
6 OK  
Remote control  
1 B  
confirms a selection.  
4 / 3 / 5 / 6  
switches the system to standby mode.  
selects an item in a menu.  
2 SOURCE (DISC/AUX/TUNER)  
moves an enlarged picture up/down/left/right.  
5 / 6  
Disc................ fast searches backward/forward in  
a disc at different speeds.  
switches on the system  
selects the respective sound source for disc/FM/  
AUX  
Tuner...............tunes to a radio station  
Clock...............sets the minutes  
3 A-B  
repeats playback of a specific section within a  
chapter of DVD or a track of VCD/CD.  
4 SYSTEM MENU  
enters or exits the system menu.  
5 MODE  
7 AUDIO  
forVCD  
sets Left vocal, Right vocal, Mono left, Mono right  
or Stereo sound mode.  
for DVD  
selects variations of continuous playback (For  
selects an audio language.  
VCD with PBC feature, PBC must be turned off.)  
ForVCD/CD only: selects to playback in random  
order (ForVCD with PBC feature, PBC must be  
turned off.)  
8 ÉÅ  
starts or interrupts disc playback.  
9 ¡ / ™  
Tuner...............selects a preset radio station  
Disc.................skips to the previous/next chapter/  
title/track  
1
Clock..............sets the hours  
TUNER  
DISPLAY  
OSD  
DISC  
A-B  
AUX  
#
2
3
For JPEG: selects different zooming rates  
$
%
MODE  
CLOCK SLEEP/TIMER  
0 9  
SYSTEM MENU  
DISC MENU  
4
5
^
stops disc playback or erases a program.  
! Numeric Keypad (0-9)  
inputs a track/title/chapter number of the disc.  
OK  
6
@ PROG  
ForVCD/CD only: program the favourite tracks  
AUDIO  
MUTE  
7
8
&
*
# DISPLAY (OSD)  
displays disc playback time during playback  
+
9
VOL  
$ CLOCK  
sets and views the clock  
0
!
GOTO  
3
1
4
2
5
8
0
(
)
% SLEEP/TIMER  
ZOOM  
6
activates/deactivates or selects the sleep timer  
activates/deactivates or sets the wake-up timer  
DSC  
9
7
¡
£
PROG  
SUBTITLE  
DBB  
@
^ DISC MENU  
DVD/VCD: enters or exits the disc contents  
menu (ForVCD with PBC feature, PBC must be  
turned on.)  
MP3/WMA/JPEG: switches on or off the album/  
picture menu.  
14  
Functional Overview  
& MUTE  
disables or enables sound output.  
* VOL +/-  
adjusts the volume upward/downward.  
( GOTO  
fast searches in a disc by entering a time, title or  
chapter (ForVCD with PBC feature, PBC must  
be turned off.)  
) ZOOM  
DVD/VCD/JPEG: enlarges a picture or active  
image on theTV screen.  
For JPEG: turns on/off the zooming feature  
¡ DSC  
selects different types of preset sound equalizer  
settings (CLASSIC, ROCK, JAZZ or POP).  
DBB  
enables or disables bass enhancement.  
£ SUBTITLE  
selects a subtitle language.  
Notes for remote control:  
– First select the source you wish to control  
by pressing one of the source select keys on  
the remote control (for example CD ,  
TUNER).  
– Then select the desired function (for  
exampleÉ, í, ë).  
15  
Getting Started  
Step 2: Setting up theTV  
IMPORTANT!  
Make sure you have completed all the  
necessary connections. (See  
“ConnectingTV”).  
Step 1: Using Remote Control  
IMPORTANT!  
– Before using the remote control,  
remove the insulation plastic tab as  
shown in the picture below.  
– If the remote control does not  
function correctly or the operating range  
is reduced, replace the battery with a  
new (CR2025) battery.  
1 Switch the DVD system on and then select  
DISC source. (See “Switching the system  
on/off”).  
2 Turn on theTV and set to the correct video-in  
channel.You should see the blue Philips DVD  
background screen on theTV.  
Usually these channels are between the  
lowest and highest channels and may be called  
FRONT, A/V IN, orVIDEO. See yourTV manual  
for more details.  
Or, you may go to channel 1 on yourTV, then  
press the Channel up button repeatedly until  
you see theVideo In channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different video  
modes.  
Or, set theTV to channel 3 or 4 if you are  
using an RF modulator.  
1 Push to open the battery tray.  
Selecting the color system that matches  
yourTV set  
2 Replace a new battery according to the  
indicated polarity.  
This DVD system is compatible with both NTSC  
and PAL. For the playback of a DVD disc on this  
DVD system, the color systems of the DVD,TV  
set and DVD System should match.  
3 Push the battery tray back to close it.  
Using the Remote Control to operate  
the Player  
MODE  
CLOCK  
SLEEP/TIMER  
1 Aim the Remote Control directly at the remote  
sensor (IR) on the front panel.  
SOURCE  
2 Select the source you wish to  
STANDBY-ON  
control by pressing one of the  
M
I
C
RO  
T
H
E
AT  
R
E
source select buttons on the  
remote.  
4
3 Then select the desired  
function (for example,  
ÉÅ, ¡ or ).  
DISC  
A-B  
AUX  
TUNER  
DISPLAY  
OSD  
MODE  
CLOCK SLEEP/TIMER  
SYSTEM MENU  
DISC MENU  
TV DISPLAY  
MULTI  
TV TYPE  
SCREEN SAVER  
CAUTION!  
Remove the battery if it is exhausted  
or if the Remote Control is not being  
used for a long time.  
SET TO MULTI  
Batteries contain chemical  
substances,so they should be disposed of  
properly.  
16  
Getting Started  
1 In disc mode, stop playback then press  
SYSTEM MENU.  
1 Turn on yourTV.  
2 Turn off yourTV progressive scan mode or turn  
on interlaced mode (refer to yourTV user  
manual).  
The menu bar will appear across the top of  
theTV screen.  
2 Select  
icon and press 4.  
3 Press STANDBY-ON B to turn on the  
3 Press à / á / 4 / 3 keys on the remote  
DVD player.  
control to navigate in the menu.  
4 Select the correctVideo Input channel.  
Move to  
, and press á.  
Move to “TVTYPE” , and press á.  
5 Press SYSTEM MENU on the remote control.  
The menu bar will appear across the top of  
theTV screen.  
MULTI  
– Select this if the connectedTV set is  
compatible with both NTSC and PAL (multi  
system).The output format will be consistent wit  
the video signal of the disc.  
6 Select  
icon and press 4.  
Playback will pause.  
NTSC  
TV DISPLAY  
TV TYPE  
– Select this if the connectedTV set is NTSC  
system. It will change the video signal of a PAL  
video disc and output to NTSC system.  
PROGRESSIVE  
SCREEN SAVER  
OFF  
ON  
PROGRESSIVE NOW ON  
PAL  
– Select this if the connectedTV set is PAL  
system. It will change the video signal of an  
NTSC disc and output to PAL format.  
7 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
4 Select an item and press OK.  
The screen messages for further setting  
confirmation may appear. Follow the on-screen  
instructions to proceed to confirm the setting or  
not.  
Move to  
, and press á.  
Move to “PROGRESSIVE” , and press á.  
Move to “ON”, and press OK.  
The screen message below appears on the  
TV.  
To remove the menu  
Press SYSTEM MENU.  
ACTIVATING PROGRESSIVE SCAN  
1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2. CONNECT USING YPRPB(RGB) VIDEO CABLES  
3. IF THERE IS A BLANK SCREEN, WAIT FOR 15  
SECONDS FOR AUTO RECOVER.  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)  
<>-MOVE  
OK-SELECT  
The progressive scan display twice the number  
of frames per seconds than interlaced scanning  
(ordinary normalTV system).With nearly double  
the number of lines, progressive scan offers  
higher picture resolution and quality.  
8 Press à / á to highlight OK in the menu and  
press OK on the remote to confirm.  
The screen message for further progressive  
scan setting confirmation will appear.  
There will be a distorted picture on your  
TV at this state until you turn on the  
progressive scan mode on yourTV.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals, a  
progressive scanTV is required.  
9 Turn on yourTV progressive scan mode (refer to  
yourTV user manual).  
0 In the confirmation menu, press à / á to  
highlight OK in the menu and press OK on the  
remote to confirm.  
2)You have connected the DVD player to your  
TV usingY Pb Pr (see “ConnectingTV set”)  
17  
Getting Started  
Progressive scan is now set on.TV screen  
comes to the system menu.  
If distored picture still appears, it indicates  
that yourTV doesn’t support progressive scan. In  
this case, turn off progressive scan as described  
in To deactivate Progressive manually”.  
1 Press SYSTEM MENU on the remote control.  
The menu bar will appear across the top of  
theTV screen.  
2 Select  
icon and press 4.  
Playback will pause.  
3 Press à / á / 4 / 3 keys on the remote  
control to navigate in the menu.  
! Press SYSTEM MENU on the remote to exit  
the system menu.  
Move to , and press á.  
Move to “OSD LANG” , and press á.  
The setup is complete now and you can start  
enjoying the high quality picture.  
4 Select your desired language and press OK.  
To deactivate Progressive manually  
To remove the menu  
When the distorted sign still appears on  
theTV, it may be because the connectedTV  
does not accept progressive signals, and  
progressive is set by mistake.You must reset the  
unit to interlace format.  
Press SYSTEM MENU on the remote control  
again.  
Setting the Audio, Subtitle and Disc  
Menu language  
1 Turn off yourTV progressive scan mode or turn  
on to interlaced mode (refer to yourTV user  
manual).  
2 Turn off progressive scan by selecting “OFF”  
under PROGRESSIVE menu, then press  
SYSTEM MENU on the remote to exit the  
system menu.  
AUDIO  
ENGLISH  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
To turn off progressive scan, you may also first  
open the disc door, then hold down on the  
front panel, and press numeric key 1” on the  
remote.  
GOTO LANGUAGE SETUP PAGE  
1 In disc mode, stop playback then press  
SYSTEM MENU.  
Progressive scan is turned off.  
The menu bar will appear across the top of  
theTV screen.  
Step 3: Setting language  
preference  
2 Select  
icon and press 4.  
You can select your own preferred language  
settings.This DVD system will automatically  
switch to the selected language whenever you  
load a disc. If the language selected is not  
available on the disc, the disc’s default language  
will be used instead.The OSD language in the  
system menu will remain once selected.  
3 Press à / á /4 / 3 keys on the remote  
control to navigate in the menu.  
Move to  
, and press á.  
Move to one of the following and press á.  
– “Audio” (disc’s soundtrack)  
– “Subtitle” (disc’s subtitles)  
– “Disc Menu” (disc’s menu)  
Setting the OSD Language  
4 Press 4 / 3 to select a language and  
press OK.  
PARENTAL  
To remove the menu  
Press SYSTEM MENU.  
PASSWORD  
OSD LANG  
DEFAULTS  
ENGLISH  
SPANISH  
PORTUGUESE  
OSD LANGUAGE SET TO ENGLISH  
18  
Basic Operations  
IMPORTANT!  
Volume control  
– Before you operate the system,  
complete the connection procedures.  
– When the system is switched to Standby  
mode, it is still consuming power.To  
disconnect the system from the power  
supply completely, reomve the AC power  
Press VOLUME (+/-) (or VOL +/- on the  
remote) to increase or decrease the volume  
level.  
The display briefly shows ”VOL” and a volume  
value from “01” to “39” ( “MIN” orMAX” is  
displayed when adjusted to the lowest or highest  
plug from the wall socket.  
volume level).  
Switching the system on/off  
To switch off the volume temporarily  
Press MUTE on the remote.  
Playback will continue without sound and  
MUTE” is displayed briefly.  
In standby, press STANDBY ONB/  
SOURCE on the set, or DISC/TUNER/  
AUX on the remote to switch on the system.  
“POWER ON” is displayed briefly.  
The system will switch to the selected or last  
selected source.  
To activate sound reproduction, you can:  
– press MUTE again;  
– adjust the volume controls;  
– change source.  
To switch the system to standby mode  
In power-on mode, press and hold STANDBY  
ONB (B on the remote).  
The clock time will be displayed. Or "--:--"  
will be displayed if clock time is not set.  
Sound Control  
DBB (Dynamic Bass Boost)  
DBB enhances the bass response.  
Press DBB to enable or disable DBB feature.  
If DBB is activated,DBB” will be shown.  
Power saving automatic standby  
As a power-saving feature, the system will  
automatically switch to Standby mode if you  
don’t press any button within 30 minutes in the  
stop mode.  
Helpful hints:  
– Some discs might be recorded in high  
modulation, which causes a distortion at high  
volume. If this occurs, switch off DBB or reduce the  
volume.  
DSC (Digital Sound Control)  
DSC provides a different type of preset sound  
equalizer setting.  
Press DSC on the remote (or on the system)  
repeatedly to select:  
CLASSIC, ROCK, JAZZ or POP  
The display shows the selected sound setting.  
19  
Disc Operations  
IMPORTANT!  
– Depending on the DVD orVIDEO CD,  
some operations may be different or  
restricted.  
– Do not push on the disc tray or put  
any objects other than disc on the disc  
tray. Doing so may cause the disc player  
malfunction.  
– If the inhibit icon appears on theTV  
screen when a button is pressed, it  
means the function is not available on  
the current disc or at the current time.  
Region Codes  
DVDs must be labeled for ALL regions or Region  
4 in order to play on this DVD system.You  
cannot play discs that are labeled for other  
regions.  
Playable Discs  
Your DVD Player will play:  
– DigitalVersatile Discs (DVDs)  
– Video CDs (VCDs)  
4
– SuperVideo CDs (SVCDs)  
– DigitalVersatile Discs + Recordable  
(DVD+R)  
– DigitalVersatile Discs + Rewritable  
(DVD+RW)  
Note:  
– If you are having trouble playing a certain disc,  
remove the disc and try a different one. Improper  
formatted disc will not play on this DVD Player.  
– Compact Discs (CDs)  
– MP3 disc on CD-R(W):  
Supported sampling frequencies: 32kHz,  
44.1kHz, 48kHz.  
Supported Bit-rates : 32, 64, 96, 128, 192,  
256(kbps)  
– WMA-CDs (CD-ROMs with WMA tracks)  
– Picture (JPEG) files on CD-R(W)  
20  
Disc Operations  
To switch PBC on or off  
Playing discs  
1 In disc mode, press SYSTEM MENU.  
The menu bar will appear across the top of  
theTV screen.  
2 Press à / á /4 / 3 keys on the remote  
control to navigate in the menu.  
1 For DVDs andVCDs, make sure that the system  
is properly connected to yourTV (See  
Connecting aTV), and yourTV is turned on  
and set to video-in channel (See Setting up  
theTV).  
Press à / á to move to PBC ON/OFF  
option, and press 4.  
If PBC was ON, it will switch to OFF and  
start playback from the beginning of the disc.  
If PBC was OFF, it will switch to ON and  
return to menu screen.  
2 Press SOURCE on the system once or more  
to select DVD mode ( or DISC on the remote  
control).  
You should see the blue Philips DVD  
background screen on theTV.  
When PBC is ON, pressing DISC MENU  
will return to menu screen.  
3 Push OPEN/CLOSE on the top of the system  
to open the disc tray.  
4 Insert a disc with the print side facing up and  
Resuming playback  
close the disc tray.  
During playback, press 9 once to stop the  
playback in resume mode, then pressÉÅ to  
start playback from where you have stopped.  
5 Playback will start automatically (depending on  
the disc type).  
If a disc menu appears on theTV, see “Using  
the Disc Menu”.  
If the disc is locked by parental control, you  
must enter your four-digit password. (See  
Restricting playback by setting parental  
level”).  
To cancel the resume mode  
In the stop position, press 9 again to fully stop  
the playback. Or open the disc door, or switch  
the system to standby mode.  
Selecting and searching  
To interrupt playback  
PressÉÅ.  
Selecting a different track/chapter  
PAUSE” is displayed briefly on theTV screen.  
For DVD/VCD/CD/MP3:  
To resume playback, press ÉÅ again.  
During playback, briefly press ¡ / once or  
more until your desired track/chapter number  
appears.  
To stop playback  
Press 9.  
Or,  
use the Numeric Keypad (0-9) (only forVCD  
(PBC OFF), CD and MP3) on the remote  
control to directly input your track/chapter  
number.  
Using the Disc Menu  
Depending on the disc, a menu may appear on  
theTV screen once you load the disc.  
After selecting, playback will automatically  
start from the beginning of the selected chapter/  
track.  
To select a playback feature or item  
Use à / á / 4 / 3 and OK or Numeric  
Keypad (0-9) on the remote control, then  
pressÉÅ to start playback.  
Helpful hints:  
– Some VCDs have a single track, so track  
selecting or an invalid input value for the current  
disc will be ingored.  
Using PBC feature (available for  
2.0-versionVCD only)  
If the player has been set to repeat chapter  
(track), pressing this button will replay the same  
chapter (track) from its beginning.  
PBC playback allows you to playVideo CDs  
interactively, following the menu on the display,  
such as allowing you to select favourite songs.  
21  
Disc Operations  
During playback, press repeatedly MODE on the  
system to choose desired repeat play modes.  
ForVCD with PBC feature, PBC must be  
turned off first.  
TV screen shows the play modes in the  
sequence as follows:  
Fast forwarding/reversing  
For DVD/VCD/CD/MP3:  
1 During playback, press á / à repeatedly to  
select fast search speed in forward (FF) or  
reverse (FR) playback.  
The disc plays at a high speed with no sound.  
ForDVDs  
CHAPTER REPEAT ON:Repeats the current  
chapter  
TITLE REPEAT ON:Repeats the current title  
REPEAT OFF:Switchs off play mode  
2 To resume to normal playback, pressÉÅ.  
Or, press à / á repeatedly until “PLAY” is  
displayed on theTV screen.  
Helpful hints:  
ForVCDs/CDs/MP3  
– For VCD/CD/MP3, fast searching forward/  
backward is available only within the same track.  
REPEATTRACK:Repeats the current track  
REPEATALL:Plays all the tracks repeatedly  
REPEAT OFF:Switchs off play mode  
REPEAT ALBUM (for MP3 only):  
Repeats the current album  
GOTO  
1 During playback, press GOTO once or more on  
the remote control.  
To return to normal playback, press MODE  
repeatedly until “OFF” is displayed.  
ForVCD with PBC feature, PBC must be  
turned off first.  
TV screen shows various search bars in the  
sequence as follows:  
SHUFFLE  
In this mode, all tracks will be played in random  
order.  
For DVDs:  
ForVCD/CD  
1 During playback, press 9 twice to fully stop the  
playback.  
2 Press MODE on the remote.  
SHUFFLE ON is displayed.  
(used to select chapter number, or title field by  
using à / á on the remote control)  
(used to select playtime within the current title)  
3 PressÉÅ to start shuffle play.  
4 To switch off shuffle play, press 9 once.  
ForVCDs/CDs:  
Helpful hints:  
Selection of shuffle play is not available for  
DVD and MP3.  
(used to select playtime within the entire disc)  
2 Use the Numeric Keypad (0-9) on the remote  
control to input your title/chapter number or  
playtime.  
Repeat A-B  
ForDVD/VCD/CD/:  
1 Press A-B on the remote at your chosen  
starting point.  
3 Press OK on the remote to start playback from  
where you have selected.  
2 Press A-B on the remote again at your chosen  
end point.  
Helpful hints:  
– An invalid input value for the current disc will  
be ingored.  
The section will now repeat continuously.  
A-B play is available within a chapter of DVD  
or a track.  
3 To exit the sequence, press A-B on the remote  
again.  
Different play modes:REPEAT,  
SHUFFLE and REPEAT A-B  
ATO B CANCELLED” is displayed briefly on  
theTV screen.  
REPEAT  
ForDVDs/VCD/CD/MP3  
22  
Disc Operations  
Display information  
Programming favourite tracks  
During playback, press DISPLAY on the  
remote control repeatedly to display various disc  
playback time on theTV screen ( and the  
system’s display).  
ForVCDs/CDs  
You can select and program up to 99 desired  
tracks for playback in the desired sequence. If  
you like, store any track/chapter/title more than  
once.  
For DVDs:  
1 During playback, press 9 twice to fully stop the  
TITLE ELAPSED - elapsed playback time of  
current title  
TITLE REMAIN - remaining time of current  
title  
CHAPTER ELAPSED - elapsed playback  
time of current chapter  
CHAPTER REMAIN - remaining time of  
current chapter  
playback.  
2 Press PROGRAM to activate programming  
mode.  
On theTV screen,PROGRAM” and  
“P 00:00” are displayed.  
On the system’s display,PROG” flashes, and  
P00: 00 is displayed.  
OFF - turns off the display information  
3 Use the Numeric Keypad (0-9) on the  
remote control to enter your desired track  
number.  
For VCDs/CDs  
ForVCD with PBC feature, PBC must be  
turned off first.  
4 Press OK on the remote to store the track.  
P00is changed to P01, indicating the first  
programmed track is stored and the next  
program sequence is available.  
SINGLE ELAPSED - elapsed playback time  
of current track  
SINGLE REMAIN - remaining time of current  
track  
TOTAL ELAPSED - elapsed playback time of  
disc.  
TOTAL REMAIN - remaining playback time of  
disc  
5 Repeat steps 3-4 to store other tracks.  
If you attempt to program more than 99  
tracks, FULL is displayed, and no track can be  
stored.  
6 PressÉÅ to playback the program.  
OFF - turns off the display information  
“PROG” is displayed during playback.  
To Erase program  
You can erase program by doing one of the  
following:  
During program playback, press 9 two times.  
Open the disc door.  
“PROG” disappears from the display.  
Helpful hints:  
– Programming is not available for DVD and  
MP3 disc.  
23  
Disc Operations  
ZOOM  
For DVDs/VCDs/JPEG  
SUBTITLE (DVD only)  
Press repeatedly SUBTITLE on the remote  
control to select different subtitle languages.  
The feature is disc dependant.  
Zooming allows you to enlarge the video/ JPEG  
image during playback.  
Press ZOOM repeatedly to zoom in on the  
playback video image.  
For JPEP picture disc, press ZOOM to  
displayZOOM ON”, then press ¡/ to select  
different enlarging rates.  
Playing aTitle (DVD only)  
1 During playback, press DISC MENU on the  
remote control.  
The disc title menu appears on theTV screen.  
2 Use à / á/4/3 or Numeric Keypad (0-9)  
Image size enlarges at different rates.  
to select a play option.  
To return to normal playback, press ZOOM  
repeatedly until “ZOOM OFF “ is displayed.  
3 Press OK to confirm.  
Helpful hints:  
Playing MP3/WMA/JPEG picture  
disc  
– When zooming in, you may use à / á/4/3  
on the remote control to pan a picture across your  
TV screen in pause position or during playback.  
IMPORTANT!  
– Make sure that the system is properly  
connected to yourTV (see Connecting a  
TV ), and yourTV is turned on and set to  
AUDIO  
video-in channel (Setting up theTV).  
– For DRM-protectedWMA files, use  
windows Media Player 10 (or later) for  
CD burning/conversion.Visit  
Windows Media Player andWM DRM  
(Windows Media Digital Rights  
Management).  
For DVDs  
On the remote control, press AUDIO  
repeatedly to select the desired language for  
sound track.  
The feature is disc dependant.  
For VCDs  
Press AUDIO repeatedly to select the audio  
channel for sound output displayed on theTV  
screen.  
1 Load a MP3/WMA/Picture (JPEG) disc.  
The disc reading time may exceed 30  
seconds due to complexity of the directory/file  
configuration.  
LEFT VOCAL, RIGHT VOCAL, MONO  
LEFT, MONO RIGHT and STEREO  
2 Playback will start automatically.  
The album/picture menu will appear on the  
TV screen. If not, press DISC MENU on the  
remote control.  
24  
Disc Operations  
3 In the stop position, press à / á / 3 / 4to  
select a desired album, then select a desired title  
in the album.  
Playing Kodak picture disc  
1 Load a Kodak picture disc.  
The disc reading time may exceed 30  
seconds due to complexity of the directory/file  
configuration.  
4 Press OK or 2;to start playback.  
You can also use the numeric keys (0-9) to  
enter your choice.  
2 Playback will start automatically.  
During playback, you may press ¡ / to select  
the previous/next title.  
3 Press 9.  
9 thumbnail pictures will appear on theTV  
screen.  
5 To stop playback, press 9.  
If the MP3-CD menu is switched off  
You can only play the current title by pressing  
2;. While in playback mode, press ¡ / to  
select the previous/next title.  
(example for the Kodak disc menu)  
1
4
7
2
5
8
3
6
The title number will appear.  
6 During JPEG or Kodak Picture disc playback,  
press PROG repeatedly to select different  
slideshow view options.There are 12 options for  
selection.The selected option will be displayed  
on theTV screen.  
9
4 Press ¡ / to view the previous/next page (if  
available).  
Playing MP3 music and JPEG  
pictures simultaneously  
You can create a musical slide show if the disc  
contains both the MP3 music and JPEG picture  
files.  
5 Press à / á/ 3 / 4to move within the  
menu and press OK to select the desired  
picture to play.  
During playback, you can:  
Press ¡ / to select another title/picture in the  
current folder.  
1 Insert a MP3 disc that contains music and  
pictures.  
Press DISC MENU to display the menu if the  
Press à / á/ 3 / 4on the remote control  
to rotate or flip the picture files.  
menu is not displayed.  
2 In the stop mode, select a MP3 track in the  
menu and press AUDIO.  
Press 2;to pause/resume playback.  
“MP3 is selected” appears on theTV.  
Notes:  
– Due to the recording nature of Digital Audio  
MP3 (DAM), only digital audio music will play.  
– It is normal to experience an occasional “skip”  
while you are listening to your MP3 discs.  
– For multi-session discs with different formats,  
only the first session can be read and played.  
– DISC MENU does not function during Kodak  
Picture disc playback.  
3 Use 3 / 4 keys to select a picture file, then  
press OK.  
4 To stop simultaneous playback, press 9.  
The picture and MP3 music playback will  
stop.  
25  
DVD Menu Operations  
Subtitle  
Using the menu bar  
You can continue some operations directly via  
the multiple menu bars on theTV screen  
without interrupting the disc playback. But when  
i
Press 4to select a desired language in DVD  
mode.  
Audio  
Press 4to select a desired audio language on  
the SVCD,VCD:  
LeftVocal pRightVocal pMono Left p  
Mono Right pStereo  
you enter  
pause.  
(SETUP MENU), the playback will  
x
Slow  
A-B  
MODE  
CLOCK  
SLEEP/TIMER  
DISC MENU  
The slow motion speed will display. Press 4  
repeatedly to select a reverse or forward  
slow motion speed.  
To cancel the slow function, press 2;.  
STATUS  
SYSTEM MENU  
1
2
OK  
In DISC mode, select this icon and press 4to  
view the time, title or chapter information of  
the playing disc.  
AUDIO  
MUTE  
Time Search  
A time edit box appears on the display. Use  
the numeric keys (0-9) to enter the time  
(hours : minutes : seconds) at which you want  
to start playback, then press OK to start play-  
back. (This function is not available in the PBC  
ON mode.  
1 In disc mode, press SYSTEM MENU.  
The menu bar will appear across the top of  
theTV set screen.  
ZOOM  
Press 4repeatedly to select an enlarged pic-  
ture ratio: 1.5, 2 or 4.You can press à/ á/  
3 / 4to move within the enlarged picture  
on theTV set.  
To resume normal playback, repeat the above  
step to select ZOOM OFF.  
ANGLE  
2 Press à/ á/4/3on the remote control to  
navigate in the menu.  
Press 4to view the same scene from different  
angles if the DVD is recorded with multi-angles.  
STEP  
Press 4repeatedly to play forward the disc  
step by step (one frame every step).To cancel  
the step function, press 2;.  
Press à/ á to move through the menu bar.  
Press 4to enter the selection.  
To remove the menu  
Press SYSTEM MENU or OK.  
PBC PBC ON/OFF  
Press 4to select PBC ON or OFF, and will re-  
turn to the beginning of the disc (This function  
is only available forVCD with PBC feature. ).  
PROGRAM  
See “Programming favourite tracks”, Using the  
menu bar to program.  
IMPORTANT!  
– Some operations may be different or  
restricted according to the disc format.  
Refer to the jacket or care of the disc you  
are playing.  
You can change the Subtitle Language  
andAudio Language from the menu bar  
only on the current disc. But this  
operation cannot change the default  
preset.  
26  
DVD Menu Operations  
TV Display (default: Normal/PS)  
Using the setup menu (user  
preference settings)  
IMPORTANT!  
– This menu is accessible only in the  
stop postion.  
Set the aspect ratio of the DVD Player according  
to theTV you have connected.  
This DVD setup is carried out via yourTV set,  
enabling you to customize the DVD System to  
suit your particular requirements  
MODE  
CLOCK  
SLEEP/TIMER  
A-B  
Normal/PS (panscan): If you have a normal  
TV and want both sides of the picture to be  
trimmed or formatted to fit yourTV screen.  
SYSTEM MENU  
DISC MENU  
1
23  
OK  
4
AUDIO  
MUTE  
1 In disc mode, press SYSTEM MENU.  
The menu bar will appear across the top of  
theTV screen.  
Normal/LB (letterbox): If you have a  
normalTV. In this case, a wide picture with black  
bands on the upper and lower portions of the  
TV screen will be displayed.  
2 Select  
icon and press 4 to enter the setup  
menu. Then press 3 4 to select one of the  
setup menu options and press á to enter the  
submenu.  
Playback will pause.  
SETUP MENU  
Wide: If you have a wide-screenTV.  
Picture Setup  
Sound Setup  
Language Setup  
Feature Setup  
3 Press à / á/4/3 on the remote control to  
navigate in the menu.  
Screen Saver (default: On)  
4 Press OK to confirm your setting.  
This function is used to turn the screen saver on  
or off.  
To return to the upper-level menu  
Press à or OK (in cases of value adjustment).  
TV DISPLAY  
TV TYPE  
To remove the menu  
Press SYSTEM MENU to exit the menu.  
Playback will resume and begin automatically.  
PROGRESSIVE  
OFF  
ON  
SCREEN SAVER  
Note:  
SCREEN SAVER NOW ON  
– Some of the features in the System Menu  
Options are described in “Getting Started”.  
ON: In STOP, PAUSE or No DISC mode, if  
no actions are performed about 5 minutes, the  
screen saver will be activated.  
OFF: Screen saver is disabled.  
27  
DVD Menu Operations  
Night Mode  
Changing the password  
You can change the four-digit code used as  
Password.  
A-B  
CLOCK  
SLEEP/TIMER  
MODE  
NIGHT MODE  
TEST TONE  
OFF  
ON  
SYSTEM MENU  
DISC MENU  
15  
23  
OK  
AUDIO  
MUTE  
NIGHT MODE SET TO OFF  
+
VOL  
OFF  
GOTO  
ZOOM  
DSC  
1
4
2
5
8
0
3
6
4
Select this when you want to enjoy the surround  
sound with its full dynamic range.  
7
9
PROG  
SUBTITLE  
DBB  
ON  
1 In disc mode, press SYSTEM MENU.  
2 Select icon and press 4.  
Playback will pause.  
Select this to level out the volume. High volume  
output will be softened and low volume output  
will be brought upward to an audio level.This  
feature is only available for movies with Dolby  
Digital mode.  
3 Press à / á/4/3 on the remote control to  
navigate in the menu.  
Move to  
, and press á.  
Move to “PASSWORD” and press á.  
TestTone  
ENTER CODE  
OSD LANG  
NIGHT MODE  
TEST TONE  
OFF  
ON  
PLEASE ENTER OLD PASSWORD  
LEFT.  
4 Use the numeric keys (0-9) to enter your  
current four-digit code.  
ON  
The password supplied by default is 1234.  
If you forget the four-digit code, press 9 four  
times, the system will change back to the default  
password.  
After selecting this item, the system will start  
testing the speaker from left, right, subwoofer  
cyclically until you exit tone test.  
-You can adjust speakers level when you are  
testing the speaker.  
-The availability of the various channels test  
depend on the number of speakers connected.  
5 Then enter your new code. Press the same code  
again to confirm.  
Note:  
ENTER CODE  
OSD LANG  
– You can press à to exit test tone mode at any  
time.  
PLEASE ENTER NEW PASSWORD  
6 Press SYSTEM MENU again to remove the  
menu.  
28  
DVD Menu Operations  
5 Press 4/3 to select a rating level between 1-8  
and press OK.  
Restricting playback by setting parental  
level  
DVDs rated above the level you select will  
not play unless you enter your four-digit  
password or choose a higher level rating. Select  
“No Parental” to deactivate Parental level and  
have all discs play.  
Some DVDs may have a parental level assigned  
to the complete disc or to certain scenes on the  
disc.This feature lets you set a playback limitation  
level.The rating levels are from 1 to 8 and are  
country specific.You can prohibit the playing of  
certain discs that are not suitable for your  
children or have certain discs played with  
alternative scenes.  
5
6 Press SYSTEM MENU again to remove the  
menu.  
Rating explanations  
NO PARENTAL - It will play all discs.  
8 ADULT - material for adults only; riewed only  
by adults due to graphic sexual scenes, violence,  
or language.  
1 In disc mode, press SYSTEM MENU.  
7 NC-17 - No children under 17; not  
recommended for children under 17.  
6 PG-R - Parental Guidance - Restricted;  
recommended that parents restrict children  
under 17 from viewing or allow them to view  
only when supervised by a parent or adult  
guardian.  
2 Select  
icon and press 4.  
Playback will pause.  
3 Press à / á/4/3 on the remote control to  
navigate in the menu.  
Move to and press á.  
Move to “PARENTAL” and press á.  
4 PG-13 - Material is unsuitable for children  
under age 13.  
3 PG - Parental Guidance suggested.  
1 PG - General Audience; recommended as  
acceptable for viewers of all ages.  
ENTER CODE  
OSD LANG  
- OSD LANG (menu language)  
To set the screen display language.The default  
setting is English.  
PLEASE ENTER PASSWORD  
4 Use the numeric keys (0-9) to enter the  
- Default  
four-digit code.  
If RESET is selected, all the items in the setup  
menu will be reset to default setting, except  
Parental Setting and Password.  
29  
Tuner  
Autostore: automatic programming  
Tuning to radio stations  
Autostore automatically starts programming  
radio stations from preset 1.Any previous  
presets e.g. manually programmed will be erased.  
1 Press STANDBY-ON y on the set to switch  
on the last selected source.  
2 Press repeatedly SOURCE (or TUNER on the  
In tuner mode, press and hold PROGRAM on  
the set until AUTOPROG appears.  
During automatic programming, display shows  
AUTOPROG.  
Available stations are programmed (40 FM).  
After all stations are stored, the first autostore  
preset station automatically plays.  
remote) until FM is displayed.  
3 Press and hold TUNING à/ á on the set  
until the frequency in the display starts changing.  
Display shows SEARCH during automatic  
tuning.  
After the system tunes to a station of  
sufficient reception, display shows its frequency .  
To tune to a weak station, press briefly and  
repeatedly TUNING à / á (or à / á on  
the remote) until an optimal reception is found.  
Listening to preset radio stations  
In tuner mode, press ¡ / (or Numberic  
keys on the remote) to select the desired  
preset number.  
The preset number, radio frequency, and  
waveband are displayed.  
4 Repeat Step 3 if necessary until you find the  
desired radio station.  
Storing preset radio stations  
You can preset up to 40 FM stations regardless  
of the reception.  
Deleting a preset radio station  
1 In tuner mode, press ¡ / (or Numberic  
keys on the remote) to select the desired  
preset number.  
Manual programming  
1 Tune to your desired radio station (refer to  
The preset number, radio frequency, and  
waveband are displayed.  
Tuning to radio stations”).  
2 Press briefly PROGRAM.  
2 Press and holdÇuntil DELETED” appears.  
The current preset radio station will be  
deleted.  
P0O” and “PRG” are displayed.  
3 Press ¡ / (or Numberic keys on the  
remote) to select the desired preset number.  
All other preset radio stations with higher  
numbers are decreased by one.  
4 Press again PROGRAM to store the radio  
station.  
“PRG” disappears on the display.  
Repeat steps 1-4 to store other radio stations.  
Helpful hints:  
– You can erase a preset station by storing  
another frequency in its place.  
30  
Clock/Timer  
2 Press DISC or TUNER to select the desired  
Viewing clock  
The clock (if it is set) will be shown in standby  
mode.  
source.  
Before setting timer, make sure the music source  
has been prepared.  
To view the clock in any source mode  
(DISC orTUNER for example)  
DISC – load the disc.  
TUNER – tune to the desired radio station.  
Press briefly CLOCK on the remote.  
3 Press ¡ / repeatedly to set the hour.  
4 Press à / á repeatedly to set the minute.  
5 Press SLEEP/TIMER to store the time.  
You may press MODE on the set to toggle  
between 12-hour and 24-hour display.  
The clock is displayed for a few seconds.  
If the clock has not been set, "--:--" is  
displayed.  
remains on the display.  
At the preset time, the selected source will play.  
To deactivate the wake-up timer  
In standby mode, press and hold SLEEP/  
TIMER untilTIMER OFF “ is displayed.  
Setting clock  
1 In standby or power on mode, press and hold  
CLOCK on the remote.  
The clock digits flash on the display panel.  
If the clock has not been set, "--:--" flashes  
Notes:  
– The system will exit timer setting mode if no  
button is pressed within 15 seconds.  
2 Press ¡ / repeatedly to set the hour.  
– Display shows  
deactivated.  
if activated, and disappears if  
3 Press à / á repeatedly to set the minute.  
4 Press CLOCK agian to store the setting.  
The clock starts working.  
Setting sleep timer  
The sleep timer enables the system to switch off  
by itself after a set period of time.  
Notes:  
– The clock setting will be erased when the system  
is disconnected from the power supply.  
– The system will exit clock setting mode if no  
button is pressed within 15 seconds.  
1 Press SLEEP/TIMER on the remote control  
repeatedly to select a preset time.  
The selections are as follows (time in  
minutes):  
1530 456090120OFF  
Setting wake-up timer  
The system can switch on to DISC orTUNER  
mode automatically at a preset time, serving as  
an alarm to wake you up.  
2 Press SLEEP/TIMER until you reach the  
desired length of time.  
To deactivate the sleep timer  
Press SLEEP/TIMER repeatedly until "OFF" is  
displayed, or press the STANDBY ON y  
button.  
IMPORTANT!  
– Before setting the timer, ensure that the  
clock is set correctly.  
To set a new timer, you need to  
deactivate the previously set timer.  
1 In standby mode, press and hold SLEEP/  
TIMER on the remote for more than five  
seconds to enter timer setting mode.  
The current source and timer digits flash on  
the display panel.  
“ NOTIMER “ will be displayed briefly if  
wake-up timer is not set.  
31  
Specifications  
AMPLIFIER  
MAIN UNIT  
Outpurt power  
Power Supply Rating .......................110-127V 60Hz  
/220-240V 50Hz, switchable  
Power Consumption  
L/R speakers ..................... 25 W /channel RMS  
Subwoofer ............................................ 50W RMS  
Speaker channel  
Active ..................................................................... 30 W  
Frequency Response .......................................................  
............................................ 200 Hz - 18 kHz / 3 dB  
Signal-to-Noise Ratio ....... > 60dB (A-weighted)  
Input Sensitivity  
AUX In ............................................................. 500 mV  
Output Sensitivity  
standby ..................................................................<3 W  
Dimensions (w x h x d)....218 x 90 x 222 (mm)  
Weight........................................................................1.24kg  
Package Dimension (w x h x d).............................  
...................................................550 x 314 x 330 (mm)  
Gross weight.............................................................9.7kg  
Line Out(1KHZ 0dB) ............................. 2 + 0.2V  
SPEAKERS  
TUNER  
System ..............................................1-way, Bass reflex  
Impedance .................................................................. 8  
Speaker drivers ......................................... 3’’ fullrange  
Frequency response ..................... 80 Hz – 20 kHz  
Package Dimension (w x h x d)................................  
...................................................125 x 250 x 232 (mm)  
Weight ............................................ 2.4 kg/left speaker  
Tuning Range............................FM 87.5 – 108 MHz  
Signal-to-Noise Ratio ......................... FM 50 dB  
DVD  
Laser Type ........................................... Semiconductor  
Disc Diameter .......................................... 12cm / 8cm  
Video Decoding ....................... MPEG-2 / MPEG-1  
Video DAC .......................................................... 12 Bits  
Signal System ........................................... PAL / NTSC  
Video Format ................................................ 4:3 / 16:9  
Video S/N ...................................... 56 dB (minimum)  
Composite Video Output ............. 1.0Vp-p, 75 Ω  
S-Video Output .....................Y - 0.714Vp-p, 75 Ω  
...................................................... C - 0.286 Vp-p, 75 Ω  
Audio DAC ..................................... 24 Bits / 96 kHz  
....................................................... 1.76 kg/right speaker  
SUBWOOOFER  
Impedance................................................................... 6 Ω  
Speaker driver ................................ 5.25” subwoofer  
Frequency response.........................60HZ—1K HZ  
Dimensions(w x h x d )................................................  
......................................................147 x 250 x 232(mm)  
Weight .........................................................................2.4kg  
Specifications and external appearance are  
subject to change without notice.  
32  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Solution  
Problem  
Check if the AC power cord is properly  
connected.  
Press STANDBY ONB on the DVD System or  
B on the remote to turn on the power.  
No power.  
Check if theTV is switched on.  
Check the video connection.  
No picture.  
Press SOURCE on the DVD player repeatedly  
to select “DVD” or press DISC on the remote.  
Set yourTV to the correctVideo In channel.This  
channel is usually near channel 00. Or, you may  
have a button on theTV remote control that  
selects Auxiliary or A/V IN channel. See yourTV  
owner’s manual for details. Or, change channels  
at theTV until you see DVD screen on theTV.  
If the progressive scan feature is activated but  
the connectedTV does not support progressive  
signals or the cables are not connected  
accordingly, see page 18-19 for proper  
progressive scan setup or deactivate the  
progressive scan feature as below:  
1)Turn off yourTV progressive scan mode or  
turn on to interlaced mode.  
2) Select “OFF” in PROGRESSIVE menu of  
system setup menu to turn off progressive, then  
press SYSTEM MENU to exit the menu.  
Sometimes a small amount of picture distortion  
may appear.This is not a malfunction.  
Clean the disc.  
Distorted or poor picture.  
TV has a colour system standard. If the disc’s or  
DVD system’s colour system is different than  
yourTV’s colour system, the picture may be  
distorted or colourless.  
Completely distorted picture or black/  
white picture.  
33  
Troubleshooting  
The aspect ratio of the screen cannot be  
changed even though you have set theTV  
shape.  
The aspect ratio is fixed on the DVD disc.  
Depending on theTV, it may not be possible to  
change the aspect ratio.  
No sound or distorted sound.  
Adjust the volume.  
Check that the speakers are connected  
correctly.  
Replace the speaker cables.  
Disconnect the headphones.  
The system is in pause, slow motion or fast  
forward/reverse mode, press ÉÅ (or ÉÅ  
on the remote) to resume normal play mode.  
The micro DVD player does not start  
playback.  
Insert a readable disc with the playback side  
facing down.  
Check the disc type, colour system and regional  
code. Check for any scratches or smudges on  
the disc.  
Press SYSTEM MENU to turn off the setup  
menu screen.  
Cancel the parental control rating function or  
change the rating level.  
Moisture has condensed inside the system.  
Remove the disc and leave the system turned  
on for about an hour.  
Disconnect the power plug from the outlet and  
insert again.  
The DVD micro system does not  
respond when the buttons are pressed.  
Multi-language sound or subtitle is not  
recorded on the DVD.  
Changing the language for the sound or subtitle  
is prohibited on the DVD.  
Cannot activate some features, such as  
Subtitles, or multi-language Audio.  
The features may not be available on the disc.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the Mini HiFi  
System and yourTV orVCR.  
Radio reception is poor.  
34  
Troubleshooting  
The timer is not working.  
Set the clock correctly.  
The Clock/Timer setting is erased.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock/timer.  
The remote control does not function.  
Select the correct source (DISC or AUX for  
example) before pressing the function button.  
Point the remote control at the remote sensor  
of the unit.  
Reduce the distance to the player.  
Remove any possible obstacles.  
Replace the battery with new one.  
Check that the battery is loaded correctly.  
Low hum or buzz sound.  
Place the DVD micro system as far away as  
possible from electrical devices (such as  
speakers,TV) that may be causing interference.  
Low bass response.  
Check all speakers for correct polarity.  
Unable to select Progressive Scan  
Check that the output of the video signal is  
switched to 'Ypbpr'.  
35  
Meet Philips at the Internet  
HTM139  
CLASS 1  
LASER PRODUCT  
Printed in China  
PDCC-JH-0634  

InFocus TD40 PAL User Manual
Intel Computer Hardware ULV Intel Celeron processor Embedded Engine Board User Manual
Intel Core I5 I5 3350p 3 10 Ghz Processor BX80637I53350P User Manual
JVC HV 29ML25 HV 29VL25 HV 29ML27 HV 29JL25 HV 29JL27 User Manual
JVC LM H191 User Manual
Kenmore Convection Oven 87561 User Manual
Kuppersbusch USA GKS 11742 0 35 F UL User Manual
MicroBoards Technology CopyWriter Series User Manual
Moffat Mayfair User Manual
Philips BDS4222B User Manual