LG Electronics LG Life Good DVD Recorder RCT689H User Manual

OWNER’S MANUAL

Digital & Analog DVD

recorder/VCR player combi

Please read this manual carefully before operating

your set and retain it for future reference.

RCT689H

P/NO : MFL65225535

www.lg.com

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Getting Started

Safety Informaion

CAUTION

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

RISK OF ELECTRIC SHOCK

DO NOT OPEN

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those speciﬁed herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure. Visible laser radiation when

open. DO NOT STARE INTO BEAM.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ﬂash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

CAUTION concerning the Power Cord

enclosure that may be of suﬃcient magnitude to

constitute a risk of electric shock to persons.

Most appliances recommend they be placed upon

a dedicated circuit;

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the speciﬁcation page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or ﬁre. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conﬁned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Getting Started

This device is equipped with a portable battery or

accumulator.

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it

means the product is covered by the

European Directive 2002/96/EC.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, ﬁre or the direct

sun light.

2. All electrical and electronic products

should be disposed of separately

from the municipal waste stream

via designated collection facilities

appointed by the government or the

local authorities.

3. The correct disposal of your old

appliance will help prevent potential

negative consequences for the

environment and human health.

4. For more detailed information

about disposal of your old appliance,

please contact your city oﬃce, waste

disposal service or the shop where you

purchased the product.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects ﬁlled

with liquids, such as vases, shall be placed on the

apparatus.

LG Electronics hereby declares

that this/these product(s) is/are

in compliance with the essential

requirements and other relevant

provisions of Directive 2004/108/EC, 2006/95/EC,

and 2006/125/EC.

Notes on Copyrights

Recording equipment should be used only for

lawful copying and you are advised to check

carefully what is lawful copying in the area

in which you are making a copy. Copying of

unlawful unless permitted by a legal exception

or consented to by the rights owner.

European representative :

LG Electronics Service Europe B.V.

Veluwezoom 15, 1327 AE Almere, The Netherlands

(Tel : +31-(0)36-547-8888)

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi Corporation, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Rovi Corporation.

Reverse engineering or disassembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL

HIGH DEFINITION TELEVISION SETS ARE FULLY

COMPATIBLE WITH THIS PRODUCT AND MAY

CAUSE ARTIFACTS TO BE DISPLAYED IN THE

PICTURE. IN CASE OF 625 PROGRESSIVE SCAN

PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER SWITCH THE CONNECTION

TO THE‘STANDARD DEFINITION’OUTPUT. IF

THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 625p UNIT

PLEASE CONTACT OUR CUSTOMER SERVICE

CENTRE

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Getting Started

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Table of Contents

System Setting

Table of Contents

Auto Set Up

22 Home Menu Overview

22 General Settings

22 – Adjust the Setup Settings

23 – Auto Programming

23 – Manual Channel Add

23 – Program Edit

25 – Auto Clock Set

25 – Manual Clock Set

27 Language Settings

28 Audio Settings

Getting Started

Safety Informaion

Introduction

– About the “7” Symbol Display

– Symbols Used in this Manual

– Supplied Accesorries

– Recordable Discs

10 – Recommended recordable DVD discs

10 – Playable Discs

29 Lock Settings

Recording Settings

– File compatibility

Remote control

Front panel

32 Disc Settings

Rear panel

Operating

34 General Explanation of On-Screen Display

34 – Displaying Information While

Watching TV

34 – Displaying Information on-screen

35 TV Viewing

35 – Viewing the EPG (Electronic

Programme Guide)

36 – Program Selection

38 Playing a DVD

Connecting

Connecting to Your TV

14 – Antenna connection to your TV and

this unit

15 – HDMI Connection

16 – Component Video Connection

16 – Scart connection

Connecting to an Ampliﬁer

– Connecting to an Ampliﬁer via Digital

Audio Output

38 – Playback Setup

38 – General Features

Playing a VCR

– Preparation

– Normal Playback

18 – Connecting to an Ampliﬁer via 2

Channel Audio Output

Connection to Another device

42 – Playing a DivX Movie Disc

44 – Playing an Audio CD or MP3/WMA

Disc

45 – Viewing a JPEG File

47 DVD Recording

19 – Accessory Audio/Video (A/V)

Connections to Recorder

19 – Connecting a Digital Camcorder

20 USB device connection

20 – Playback content in the USB device

20 – Compatible USB Flash Drive

47 – DVD Recording

48 – Basic Recording from a TV

49 – Instant Timer Recording

49 – Timer Recording

51 – Recording from External Components

52 DVD Editing

52 – Title List and Chapter List Menu

Overview

53 – VR Mode: Original and Playlist Editing

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Table of Contents

60 Dubbing

60 – Dubbing from VCR to DVD

60 – Recording from DV Input

– Recording from a Digital Camcorder

Troubleshooting

62 Troubleshooting

62 – General

62 – Resetting the unit

63 – Playback

63 – Recording

64 – HDMI

Appendix

65 Controlling a TV with the Supplied

Remote Control

65 – Setting up the remote to control your

66 Area Code List

67 Language code List

68 Trademarks and Licenses

69 Speciﬁcations

Maintenance

– Handling the Unit

– Notes on Discs

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Getting Started

Supplied Accesorries

Introduction

About the “ ” Symbol Display

“7”may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

speciﬁc media.

Remote control (1)

RF cable (1)

Battery (1)

Symbols Used in this Manual

Note

Indicates special notes and operating features.

Caution

What is SIMPLINK?

Indicates cautions for preventing possible damages

from abuse.

A section whose title has one of the following

symbols are applicable only to the disc represented

by the symbol.

Some functions of this unit are controlled by TV’s

remote control when this unit and LG TV with

SIMPLINK are connected through HDMI connection.

All DVD discs listed below

DVD ALL

-RW_VR

Controllable functions by LG TV’s remote control;

Play, Pause, Scan, Skip, Stop, Power Oﬀ, etc.

DVD-RW with VR recording

mode

Refer to the TV owner’s manual for the details of

SIMPLINK function.

DVD-RW with Video

reocording mode

-RW_Video

LG TV with SIMPLINK function has the logo as

shown above.

DVD+RW disc

DVD-R disc

+RW

-R

DVD+R (DL) disc

DVD-Video disc

DVD

Audio CDs

MP3 ﬁles

WMA ﬁles

JPEG ﬁles

Video Tape

DivX ﬁles

ACD

MP3

WMA

JPEG

VCR

DivX

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

Getting Started

Recordable Discs

DVD+R:

These Discs can be recorded only

once. After you ﬁnalize a DVD+R,

you cannot record on it or edit it

any more.

DVD-RW:

DVD-RW discs can be formatted

for VR mode recording or Video

mode recording.

Playable on DVD+R compatible

players (after ﬁnalization).

These Discs can be recorded on

repeatedly. Recordings can be

erased, then you can record again

on the same Disc.

Any edited contents are not be

compatible on DVD+R compatible

players. (Hide, chapter combine,

added chapter mark, etc.)

[VR mode]

Limited title/chapter editing

features.

Recordings can be extensively

edited.

Playable only on VR mode

compatible players (after

ﬁnalization).

Note for recording

Disc

type

Disc format Recording Functions

mod

Video format n/a

[Video mode]

Playable on regular DVD players

(after ﬁnalization)

Playback only

DVD

Video

Recording

format

VR mode

Playback, recording,

Original/Playlist editing

DVD-RW

Limited editing features.

DVD-R:

Video

format

Video

mode

Playback, limited

recording, limited editing

These Discs can be recorded only

once. After you ﬁnalize a DVD-R,

you cannot record on it or edit it.

(default)

Video format Video

mode

Playback, limited

recording, limited editing

DVD-R

DVD-R discs can be only

formatted to Video mode.

+RW Video

format

DVD+RW

Playback, limited

recording, Title/Chapter

editing

DVD+RW

Playable on regular DVD players

(after ﬁnalization).

+R Video

format

DVD+R

Playback, limited

recording, limited Title/

Chapter editing

DVD+R

Limited editing features.

DVD+RW:

These Discs can be recorded on

repeatedly. Recordings can be

erased, then you can record again

on the same Disc.

Playable on DVD+RW compatible

players (automatically ﬁnalization).

The edited contents are playable

on DVD+RW compatible players

only after ﬁnalization.

Recordings can be edited the

title/chapter

RC689D-P.BITALLU_MFL65225535_ENG.indd

11. 2. 1. �� 12:12

10 Getting Started

Note

Recommended recordable

DVD discs

Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD R/RW)

disc itself, some CD-R/RW (or DVD R/RW) discs

cannot be played on the unit.

Mitsubishi (8x, 16x), Verbatim

(8x, 16x)

Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

DVD-R

Mitsubishi (8x, 16x), Verbatim

(8x, 16x), JVC (4x), Maxell (4x)

Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). Doing so may result in

malfunctions.

DVD-RW

Mitsubishi (8x, 16x), Verbatim

(8x, 16x)

Depending on the recording software & the

ﬁnalization, some recorded discs (CD-R/RW,

DVD R/RW) may not be playable.

DVD+R

Mitsubishi (2.4x, 8x)

DVD+R(DL)

DVD+RW

DVD-R/RW, DVD+R/RW and CD-R/RW discs

recorded using a personal computer or a DVD or

CD Recorder may not play if the disc is damaged

or dirty, or if there is dirt or condensation on the

Recorder’s lens.

Mitsubishi (8x, 16x), HP (4x),

Verbatim (4x), Ricoh (4x)

Note

If you record a disc using a personal computer,

even if it is recorded in a compatible format,

there are cases in which it may not play because

of the settings of the application software used

to create the disc. (Check with the software

publisher for more detailed information.)

If a DVD-RW/DVD+RW discs is recorded using

a personal computer or other DVD recorder,

you cannot format the disc using this recorder.

So if you want to use the disc on this recorder,

you must format the disc using the original

recorder.

This player requires discs and recordings to meet

certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are

many diﬀerent types of recordable disc formats

(including CD-R containing MP3 or WMA ﬁles)

and these require certain pre-existing conditions

to ensure compatible playback.

Playable Discs

DVD-VIDEO (8 cm / 12 cm disc)

Discs such as movies that can be

purchased or rented.

Customers should note that permission is

required in order to download MP3 / WMA ﬁles

and music from the Internet. Our company has

no right to grant such permission. Permission

should always be sought from the copyright

owner.

Audio CD (8 cm / 12 cm disc)

Music CDs or CD-Rs/CD-RWs in

music CD format that can be

purchased

CD-R/RW (8 cm / 12 cm disc)

Regional Code

This unit has a regional code printed on the rear of

the unit. This unit can play only DVD discs labeled

same as the rear of the unit or“ALL”.

CD-R/CD-RW discs that contain

audio titles, DivX, MP3, WMA, or JPEG

ﬁles.

RC689D-P.BITALLU_MFL65225535_ENG.indd 10

11. 2. 1. �� 12:12

Getting Started 11

Audio Files

Sampling frequency: within 8 - 48 kHz (MP3),

File compatibility

within 32 - 48kHz (WMA)

Overall

Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps

(WMA)

Available File extensions: “.jpg”, “.jpeg”, “.avi”, “.divx”,

“.mpg”, “.mpeg”, “.mp4”, “.mp3”, “.wma””

Note

Some wav ﬁles are not supported on this player.

The ﬁle name is limited to 180 characters.

This unit cannot support the ID3 Tag

embedded MP3 ﬁle.

Depending on the size and number of the ﬁles,

it may take several minutes to read the contents

on the media.

The total playback time indicated on the

screen may not correct for VBR ﬁles.

Maximum Files/Folder: Less than 1999 (total

number of ﬁles and folders)

Photo Files

Recommended size:

CD-R/RW, DVD R/RW Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

Less than 4MB recommended

Progressive and lossless compression photo

image ﬁles are not supported.

Video Files

Available resolution size: 720 x 576 (W x H) pixels

Playable subtitle: “.smi”, “.srt”,

Playable Codec format: “DIV3”, “MP43”, “DIVX”,

“DX50”

Depending on the size and number of the JPEG

ﬁles, it may take several minutes to read the

contents of the media.

Playable Audio format: “AC3”, “PCM”, “MP2”, “MP3”,

“WMA”

Not all the WMA Audio format is compatible with

this unit.

Sampling frequency: within 8 - 48 kHz (MP3),

within 32 - 48kHz (WMA)

Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps

(WMA)

Note

HD video ﬁles contained on the CD or USB

1.0/1.1 may not played properly.

This player supports H.264/MPEG-4 AVC

proﬁle Main, High at Level 4.1. For a ﬁle

with higher level, the warning message will

appear on the screen.

This player does not support ﬁles that are

recorded with GMC ¹or Qpel ². Those

are video encoding techniques in MPEG4

standard, like DivX or XVID have.

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

RC689D-P.BITALLU_MFL65225535_ENG.indd 11

11. 2. 1. �� 12:12

12 Getting Started

Remote control

• • • • • • a • • • • •

PR/TRK (+/-): Select channel

programme of the recorder. To

adjust tracking. To control vertical

tremble during picture still.

1(POWER): Switches the unit ON

or OFF.

DVD: Selects the unit’s mode to

DVD.

ENTER (b): Acknowledges menu

selection or displays the TV info.

VCR: Selects the unit’s mode to

VCR.

DISPLAY: Accesses On-Screen

Display.

EJECT, OPEN/CLOSE: Opens and

closes the disc tray and ejects the

tape in the VCR deck.

RETURN (x): Exits the menu or

back to previous step.

0-9 numerical buttons: Selects

• • • • • • d • • • • •

numbered options in a menu.

AUDIO ([): Selects an audio

REC (X): Starts recording.

Press repeatedly to set the

recording time.

language or audio channel.

TITLE: Displays the disc’s Title

menu, if available.

AV/INPUT: Changes the input to

use for recording (Tuner, AV1-2, or

DV IN).

MARKER(=): Marks any point

during playback.

CLEAR:

TV Control Buttons: See page 65.

- Removes a mark on the Marker

Search menu.

- Reset tape counter to zero.

• • • • • • b • • • • •

SCAN(c/v):

- DVD: Search backward or

forward.

- VCR: Rewinds/Advances the tape

during the STOP mode for fast

reverse/forward picture search.

Colored buttons: Use when

tuned to a teletext program of a

digital broadcast. The function of

each button will be described

on-screen, and changes

depending on the screen being

displayed.

SKIP(C/V): Go to next or

previous chapter/track or ﬁle.

FAV: Displays the favorite

programme list.

PAUSE/STEP(M): Pause playback

or recording temporarily.

Battery Installation

REPEAT: Repeats a desired section

or sequence.

PLAY(z): Starts playback.

STOP(Z): Stops playback or

recording.

SUBTITLE: Selects a subtitle

language.

• • • • • • c • • • • •

TEXT: Switches between teletext

mode and normal TV viewing.

HOME(n): Accesses or removes

the HOME menu.

EPG: Displays the EPG menu.

Remove the battery cover on the

rear of the Remote Control, and

insert two R03 (size AAA) batteries

with 4and 5matched correctly.

MENU/LIST: Accesses menu on

a DVD disc, Title List or Playlist

menu.

DUBBING: Press to copy VCR to

DVD

a/d/w/s(left/right/up/down):

Navigates on-screen displays.

RC689D-P.BITALLU_MFL65225535_ENG.indd 12

11. 2. 1. �� 12:12

Getting Started 13

Front panel

1/I (Power)

VCR/B

Disc Tray

N(PLAY/PAUSE)

Z(STOP)

DVD/B

Display window

X(Recording)

PROG. (s/w)

DUBBING

Remote Sensor

Cassette Compartment (VCR deck)

USB Port

DVD/VCR

DV IN

RES.

AV IN 2 (VIDEO/AUDIO (Left/Right))

Rear panel

ANTENNA IN (FROM ANT.)

AC Power Cord

OPTICAL (DIGITAL AUDIO OUTPUT)

COMPONENT OUTPUT (Y Pb Pr)

AV1 (SCART JACK)

ANTENNA OUT (TO TV)

COAXIAL (OUTPUT)

AUDIO OUTPUT (Left/Right)

HDMI OUTPUT

RC689D-P.BITALLU_MFL65225535_ENG.indd 13

11. 2. 1. �� 12:12

14 Connecting

Antenna connection to your

TV and this unit

Remove the antenna cable plug from your TV set

and insert it into the antenna socket at the back of

the recorder. Plug one end of the antenna cable

into the TV socket on the recorder and the other

end into the antenna input socket on your TV set.

Connecting to Your TV

Make one of the following connections, depending

on the capabilities of your existing equipment.

Antenna connection to your TV and this unit

(page 14)

HDMI connection (page 15)

Connect one end of the RF cable to ANTENNA

OUT(TO TV) jack on the unit and other end to

ANTENNA IN jack on your TV. Passes the signal from

the ANTENNA IN jack to your TV/monitor.

Component Video connection (page 16)

Scart connection (page 16)

Note

Connect the ANTENNA IN jack on the unit. If you

want to use an indoor antenna, use one with

a signal ampliﬁer rated at 5V, 100mA and set

[Antenna Feed 5V] to [ON] in the setup menu (See

page 26).

Depending on your TV and other

equipment you wish to connect, there are

various ways you could connect the unit.

Use only one of the connections described

in this manual.

Please refer to the manuals of your TV,

Stereo System or other devices as necessary

to make the best connections.

ANTENNA

(Digital or Analog)

Make sure the player is connected directly

to the TV. Tune the TV to the correct video

input channel.

Do not connect the player’s AUDIO OUT

jack to the phono in jack (record player) of

your audio system.

RF Cable

Do not connect your player via your VCR.

The image could be distorted by the copy

protection system.

Rear of this unit

Note

Please observe that this recorder is not

designed for the reception of regular digital

cable-TV signals (QAMsignal). Despite this,

operators of smaller cable networks may have

chosen to distribute the digital terrestrial

signals (COFDM-signal) in the network. In this

case this recorder may well be used. Check

with your landlord if you are insecure about

what type of TV-signal that is provided in the

wall antenna outlet.

RC689D-P.BITALLU_MFL65225535_ENG.indd 14

11. 2. 1. �� 12:12

Connecting 15

Note

HDMI Connection

When you use the HDMI connection, you

can change the resolution (576i, 576p, 720p,

or 1080i) for the HDMI output using RES.

button on the front panel.

If you have a HDMI TV or monitor, you can connect

it to this player using a HDMI cable (Type A).

Connect the HDMI jack on the unit to the HDMI

jack on a HDMI compatible TV or monitor.

If your TV is NOT capable of handling 96

kHz sampling frequency, set the [Sampling

Freq.] option to [48 kHz] on the setup menu

(See page 28).

Rear of this unit

When this choice is made, this unit will

automatically convert any 96 kHz signals to

48 kHz so your system can decode them.

If your TV is not equipped with Dolby Digital

and MPEG decoder, set the [Dolby Digital]

and [MPEG] options to [PCM] on the setup

menu (See page 28).

If your TV is not equipped with DTS decoder,

set the [DTS] options to [OFF] on the setup

menu (See page 28). To enjoy DTS multi

channel surround, you must connect this

recorder to a DTS compatible receiver via

one of this recorder’s digital audio outputs.

HDMI cable

The arrow on the cable connector body

should face up for correct alignment with

the connector on the recorder. If your TV is

NOT capable of handling 96 kHz sampling

frequency, set the [Sampling Freq.] option

to [48 kHz] on the setup menu (See page

28).

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Additional Information for HDMI

When you connect a HDMI or DVI compatible

device make sure of the following:

About HDMI

HDMI (High Deﬁnition Multimedia Interface)

supports both video and audio on a single digital

connection for use with DVD Players, Set-Top Boxes,

and other AV devices.

Try switching oﬀ the HDMI/DVI device and

this player. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this player.

The connected device’s video input is set

correctly for this unit.

HDMI was developed to provide the technologies

of HDCP (High Deﬁnition Contents Protection).

HDCP is used to protect digital content transmitted

and received.

The connected device is compatible with

720x480p, 1280x720p, 1920x1080i or

1920x1080p video input.

HDMI has the capability to support standard,

enhanced, or high-deﬁnition video plus standard

to multi-channel surround-sound audio, HDMI

features include uncompressed digital video,

a bandwidth of up to 5 gigabytes per second,

one connector (instead of several cables and

connectors), and communication between the AV

source and AV devices such as DTVs.

Not all HDCP-compatible HDMI or DVI devices

will work with this player.

The picture will not be displayed properly

with non-HDCP device.

This player does not playback and TV screen

is changed to black screen.

RC689D-P.BITALLU_MFL65225535_ENG.indd 15

11. 2. 1. �� 12:12

16 Connecting

Component Video Connection

Scart connection

Connect the COMPONENT VIDEO OUT jacks on the

player to the corresponding input jacks on the TV

using component video cable. Connect the left and

right AUDIO OUT jacks of the player to the audio

left and right IN jacks on the TV using the audio

cables.

Connect one end of the scart cable into the

AV1 scart jack on the unit and other end to the

corresponding in jack on your TV. You can get Audio

and Video signals together with this connection.

SACRT cable

Component

video cable

Audio cable

Rear of this unit

Note

Set the resolution to 576p for progressive

signal using RES. button on the front panel.

RC689D-P.BITALLU_MFL65225535_ENG.indd 16

11. 2. 1. �� 12:12

Connecting 17

1. Connect one of the Recorder’s DIGITAL AUDIO

OUTPUT jacks (OPTICAL or COAXIAL) to the

corresponding in jack on your ampliﬁer. Use an

optional digital (Optical or Coaxial) audio cable.

Connecting to an

Ampliﬁer

2. You will need to activate the Recorder ’s digital

output. (See [Audio Settings] on page 28).

Connecting to an Ampliﬁer via

Digital Audio Output

Connecting to an ampliﬁer equipped with two

channel analog stereo.

Note

If the audio format of the digital output

does not match the capabilities of your

receiver, the receiver will produce a strong,

distorted sound or no sound at all.

Connecting to an ampliﬁer equipped with two

channel digital stereo (PCM) or to an Audio/Video

receiver equipped with a multi-channel decoder

(Dolby Digital™, MPEG 2, or DTS)

Six Channel Digital Surround Sound via

digital connection can only be obtained

if your receiver is equipped with a Digital

Multi-channel decoder.

Ampliﬁer/Receiver

To see the audio format of the current DVD

in the on-screen display, press AUDIO.

This Recorder does not perform internal (2

channel) decoding of a DTS sound track. To

enjoy DTS multi channel surround, you must

connect this Recorder to a DTS compatible

receiver via one of this Recorder’s digital

audio outputs.

OPTICAL

COAXIAL

DIGITAL INPUT

While viewing a digital channel, the 2

channel stereo audio is only output through

the audio output jacks.

A digital multi-channel connection provides

the best sound quality. For this you need

a multi-channel Audio/Video receiver that

supports one or more of the audio formats

supported by your Recorder (MPEG 2, Dolby

Digital and DTS). Check the receiver manual

and the logos on the front of the receiver.

OPTICAL

COAXIAL

Rear of this unit

RC689D-P.BITALLU_MFL65225535_ENG.indd 17

11. 2. 1. �� 12:12

18 Connecting

Connecting to an Ampliﬁer via

2 Channel Audio Output

Connect the Left and Right 2CH AUDIO OUT jacks

on the player to the audio left and right in jacks

on your ampliﬁer, receiver, or stereo system using

audio cables.

Ampliﬁer/Receiver

AUDIO INPUT

Audio cable

Rear of this unit

RC689D-P.BITALLU_MFL65225535_ENG.indd 18

11. 2. 1. �� 12:12

Connecting 19

Connecting a Digital

Connection to Another

device

Camcorder

Using the front panel DV IN jack, it is possible to

connect a DV digital camcorder or video deck or

DVD-R/RW recorder and digitally transfer DV tapes

or DVD-R/RW discs to DVD-R/RW.

Accessory Audio/Video (A/V)

Connections to Recorder

Connect the input jacks (AV IN 2) on the recorder

to the audio/video out jacks on your accessory

component, using audio/video cables.

Use a DV cable (not supplied) to connect the DV in/

out jack of your DV camcorder/video deck to the

front panel DV IN jack of this recorder.

Jack panel of Accessory Component

(VCR, Comcorder, etc.)

DV Digital Camcorder

AUDIO

IN/OUT

OUTPUT

VIDEO

OUTPUT

Front of the unit

Note

This jack is for connection to DV equipment

only. It is not compatible with digital

satellite tuners or D-VIDEO video decks.

Front of the unit

Disconnecting the DV cable while recording

a contents of the connected digital

camcorder may result in malfunction.

RC689D-P.BITALLU_MFL65225535_ENG.indd 19

11. 2. 1. �� 12:12

20 Connecting

Compatible USB Flash Drive

1. USB Flash Drive which require additional

program installation when you have connected

it to a computer, is not supported.

USB device connection

This unit can play movie, music and photo ﬁles

contained on a USB device.

2. USB Flash Drive: USB Flash Drive that support

USB1.1.

Playback content in the USB

device

1. Insert a USB device into the USB port until it ﬁts

into place.

Note

The contents on the disc cannot be moved

or copied to USB Flash Drive.

Keep the USB Flash Drive out of reach of

children. If swallowed, seek medical advice

immediately.

This unit supports only USB Flash Drive with

FAT16 or FAT32 format.

The USB Flash Drives which require

additional program installation when you

have connected it to a computer are not

supported.

This unit is compatible with the Flash type

USB device that supports USB 1.1.

This unit may not support some USB Flash

Drives.

2. Press HOME (n).

Do not extract the USB Flash Drive during

operation (play, etc.).

3. Select [Movie], [Photo] or [Music] using a/d,

and press ENTER (b).

It may cause a malfunction on this unit.

4. Select the [USB] option using s/wand press

ENTER (b).

5. Select a ﬁle using s/w, and ENTER (b) to play

the ﬁle.

6. Withdraw the USB device carefully.

RC689D-P.BITALLU_MFL65225535_ENG.indd 20

11. 2. 1. �� 12:12

System Setting 21

[Manual]

Auto Set Up

After the POWER is pressed for the ﬁrst time to turn

on the unit or after resetting the unit, the Initial

Setup Wizard function sets the language, tuner

channels and clock automatically.

Enter the necessary information for year, date

and time.

a/d(left/right): Moves the cursor to the

previous or next column.

s/w(up/down): Changes the setting at the

current cursor position.

Press ENTER (b) to conﬁrm your setting.

1. Select a language for the Setup menu and

onscreen display. Use s/wto select a language

then press ENTER (b).

4. Use s/w to select a country then press d.

Press RETURN (x) to skip the Initial Setup.

Use s/wto select the [Digital], [Analog] or [All]

and press d.

2. Check your antenna connections.

5. Press ENTER (b) to begin the channel search.

Press ENTER (b) to move next step.

6. Press ENTER (b) to exit the menu.

Press ato go back to the previous level.

Note

3. Use s/w to select the clock Set option then

press ENTER (b).

You can reset the Initial Setup Wizard from the

[Factory Set] in the setup menu. (see page 26).

[Auto]

When Channel auto search is completed the

actual Time and Date are also set automatically.

(See“Auto Clock Set”on page 25)

RC689D-P.BITALLU_MFL65225535_ENG.indd 21

11. 2. 1. �� 12:12

22 System Setting

Home Menu Overview General Settings

From the Home Menu screen you can access all the

Media for playback and recording of the unit.

Adjust the Setup Settings

1. Press HOME (n).The Home menu appears.

You can change the settings of the unit in the

The unit will be in tuner mode always when the

[SETUP] menu.

Home menu appears.

1. Press HOME (n).

2. Use a/dto select the [SETUP] and press

ENTER (b). The [SETUP] menu appears.

2. Use a/dto select the desired option.

[Easy Menu]

Setup: Displays Setup menu.

Rec. Mode: Displays Record Mode setup

menu. (See page 31)

3. Use s/wto select the ﬁrst setup option, and

[RECORD]

press dto move to the second level.

Timer Record: Displays [Timer Record] menu.

(See page 49-50).

[MOVIE]

VCR: Playing a VCR. (page 41-42)

DISC:

Displays TITLE LIST menu for recordable disc

(page 52)

Playing a DVD (page 38-40).

4. Use s/wto select a second setup option, and

USB: Displays [Movie List] menu for USB Flash

Drive.

press d to move to the third level.

[PHOTO]

DISC: Displays [Photo List] menu for disc.

USB: Displays [Photo List] menu for USB Flash

Drive.

[MUSIC]

DISC: Displays [Music List] menu for disc.

5. Use s/wto select a desired setting, and press

USB: Displays [Music List] menu for USB Flash

Drive.

ENTER (b) to conﬁrm your selection.

3. Use a/dto select the desired option.

Press ENTER (b)to conﬁrm your selection.

4. Press HOME (n) to exit the Home menu.

Note

The Movie, Photo and Music menus are only

enable when there are the Movie, Photo and

Music contents.

RC689D-P.BITALLU_MFL65225535_ENG.indd 22

11. 2. 1. �� 12:12

System Setting 23

Switching the program list to

DIGITAL TV, ANALOG TV, or RADIO

Auto Programming

This recorder is equipped with a frequency

synthesized tuner capable of receiving the analog

and digital channels.

1. Press wto move the highlight position to top of

the program list.

2. Press a/dto select a [DIGITAL TV], [ANALOG

TV] or [RADIO]. Selected program list appears.

Program Edit

You can edit a channel manually (add, delete, name,

move, etc.).

Note

Password is needed to access the [Auto

Programming] option if [Lock System] option

is set to [On].

1. Display [SETUP] menu.

2. Select the [Auto Programming] option then

press d.

3. Press dto move to the second level.

4. Use s/w to select a country then press d.

5. Use s/wto select the [Digital], [Analog] or [All]

and press d.

6. Press ENTER (b) to begin the channel search.

The tuner will automatically cycle through all

available channels in the area and place them in

the tuner’s memory.

1. Display [SETUP] menu.

2. Use s/wto select [Program Edit], and press d.

Manual Channel Add

This feature manually adds channels.

3. Use s/wto select the [Edit], and press ENTER

(b). Program List menu appears.

4. Use s/wto select a Ch. number then press

ENTER (b). Program List options appears on the

left side of the menu display.

Note

Password is needed to access the [Auto

Programming] option if [Lock System] option

is set to [On].

5. Use s/wto select an option then press ENTER

(b) to conﬁrm.

1. Select the [Program Edit] option then press d.

[Favorite]

2. Use s/wto select the [Add Channel] option

Set the memorized channel to favorite channel.

(favorite channel shows FAV icon.).

then press ENTER (b).

3. Use s/wto select [Analog] for analog channel

[Delete]

or [Digital] for digital channel then press d.

Deletes the program from program list.

4. Use s/wto select a channel number.

Searches for a channel automatically.

Searching stops when the recorder tunes in a

channel.

[Move] (Analog channel only)

Moves the program’s location on the program

list.

5. Press ENTER (b) to add the channel.

[Block]

Blocks the program.

[Station Rename] ] (Analog channel only)

Edits the station name.

RC689D-P.BITALLU_MFL65225535_ENG.indd 23

11. 2. 1. �� 12:12

24 System Setting

Station Rename

[Program Edit] (Analog channel only)

You can name stations independently. Names can

be up to 5 characters long.

Edits the selected program.

6. Press RETURN (x) repeatedly to exit Program

1. Use s/wto select a program on the Program

List menu then press ENTER (b).

List menu

Program List options appears on the left side of

the Program List menu.

Program Edit

You can perform a search to select and store an TV

channels manually.

2. Use s/wto select [Station Rename] option

from Program List options then press ENTER

(b). Keyboard menu appears.

1. Use s/wto select a program on the Program

List menu then press ENTER (b).

Program List options appears on the left side of

the Program List menu.

2. Use s/wto select [Program Edit] option from

the options then press ENTER (b).

Program Edit menu appears.

3. Enter a name for the station. Use a/d/s/w

to select a character then press ENTER (b) to

conﬁrm your selection.

3. See the descriptions on below to use Program

Edit menu.

[Alphabet Capital/Alphabet Small] – Change

the keyboard menu settings to capital letters,

small letters.

a/d(left/right): Moves the cursor to the

previous or next column.

[Symbol] – Switches the keyboard to symbol

characters.

s/w(up/down): Changes the setting at the

current cursor position.

[Space] – Inserts a space at the cursor position.

[Delete] – Clear all entered characters.

[a/d] – Moves cursor to left or right.

[OK] – Select to ﬁnish.

[PR]

Indicates program number (display only).

[Seek]

Searches a station automatically.

Use a/dto select Seek option then press s/

w. Searching stops when the recorder tunes in

a station.

[Cancel] – Select to exit the menu.

4. Choose [OK] icon then press ENTER (b) to ﬁx

the name and returns to the Program List menu.

[Ch.]

Changes the channel number to edit. Use a/

dto select Ch. option then press s/w.

[MFT]

Changes the frequency for ﬁne tuning.

Use a/dto select MFT option then press s/

[NICAM]

Set the NICAM function to for the program On

or Oﬀ.

4. Choose OK then press ENTER (b) to conﬁrm the

setting and returns to the Program List menu.

RC689D-P.BITALLU_MFL65225535_ENG.indd 24

11. 2. 1. �� 12:12

System Setting 25

Note

Sort TV channels manually

You can sort the program’s position on the Program

List menu.

There are cases where the TV station does

not send, or sends wrong date and/or

time information and the recorder sets the

incorrect time.

1. Use s/wto select a program on the Program

List menu then press ENTER (b).

If this happens, we recommend that you set

the clock manually.

Program List options appears on the left side of

the Program List menu.

2. Use s/wto select [Move] option from Program

List options then press ENTER (b).

Manual Clock Set

1. Select [Clock set] option then press d.

3. Use s/wto select a desired position then

press ENTER (b) to store.

2. Use s/wto select [Manual] option then press

ENTER (b).

Deleting a program

3. Enter the necessary information for date and

time.

You can delete a program on the Program List

menu.

a/d(left/right): Moves the cursor to the

1. Use s/wto select a program on the Program

List menu then press ENTER (b).

previous or next column.

Program List options appears on the left side of

the Program List menu.

s/w(up/down): Changes the setting at the

current cursor position.

2. Use s/wto select [Delete] option from

Program List options then press ENTER (b).

The Program is deleted.

4. Press ENTER (b) to conﬁrm your setting.

TV Aspect

To record a wide screen format programme

successfully the correct type of wide screen signal

must be broadcast by the TV station.

Setting the NICAM ON/OFF

This DVD recorder can receive Hi-Fi sound

transmissions in NICAM Stereo. However, if sound

distortion occurs, due to poor reception, you can

switch Oﬀ.

You can choose:

[4:3 Letter Box]

Select when a standard 4:3 TV is connected.

Displays theatrical images with masking bars

above and below the picture.

Auto Clock Set

When Channel auto search is completed the actual

Time and Date are also set automatically. If the time

in the recorder display is not correct, the clock must

be set manually.

[4:3 Pan Scan]

Select when a standard 4:3 TV is connected.

The video material formatted in the Pan & Scan

style is played back in that style (Both sides of

the picture are cut oﬀ..

1. Select [Clock set] option then press d.

2. Use s/wto select [Auto] option then press

ENTER (b).

[16:9 Wide]

3. If the clock that has automatically set is diﬀerent

with your local clock, you can add more time

using [Time Oﬀset] option. (For example, when

summer time is started in local area.) Press dto

select [Time Oﬀset] option.

Select when a 16:9 wide TV is connected.

4. Press s/wto select a value then press ENTER

(b) (0, 30, 60, 90, 120). Select“0”if the clock

that has automatically set is identiﬁed with your

local clock.

RC689D-P.BITALLU_MFL65225535_ENG.indd 25

11. 2. 1. �� 12:12

26 System Setting

VCR Play Aspect

Antenna Feed 5V

You can choose:

If you are using indoor antenna with a signal

ampliﬁer rated at DC 5V, 100mA, the recorder can

supply power through ANTENNA IN jack.

[AUTO]

Automatically plays back Wide-Screen

programmes as Wide-Screen and Normal

programmes as normal.

1. Display [Setup] menu.

2. Use a/d/s/wto select the [Antenna Feed

5V], and press ENTER (b).

[4:3]

3. Use w/sto select [ON] and press ENTER (b) to

supply antenna power.

Only for playing back Normal format recordings

(4:3).

Note

[16:9]

The [Antenna Feed 5V] option must be set to

[OFF] when your indoor antenna is supplied

the power from the mains. If you set the

[Antenna Feed 5V] option to [ON] for the

indoor antenna which is supplied power from

the mains, it may cause serious defect to this

unit.

Only for playing back Wide-Screen format

recordings (16:9).

VCR Play System

Your video recorder uses triple colour standards,

Auto, PAL and MESECAM. During play your

video recorder should select the colour system

automatically, however if you experience problems

you may need to do it manually.

Initialization

You can reset the recorder to its original factory

settings.

Video output format

Select the Video output format option according to

the connection type of this unit.

[Factory Set] If you need to, you can reset the

recorder to all its factory settings. Some options

cannot be reset. (DVD Rating, Password, and Area

Code) Select [Factory Set] icon then press ENTER

(b) and auto setup menu will appear, see page 21.

[YPbPr]

When your TV is connected with the

COMPONENT OUTPUT jack on this unit.

1. Select [Initialization] option then press d.

2. Press ENTER (b) and then conﬁrm message will

appear.

[RGB]

3. Use a/dto select [Yes] or [No] then press

When your TV is connected with the

SCART(RGB signal) jack on this unit.

ENTER (b).

Note

This option can be changed only when the

resolution is set to 576i.

RC689D-P.BITALLU_MFL65225535_ENG.indd 26

11. 2. 1. �� 12:12

System Setting 27

DTV Subtitle

Digital channels sometimes provide subtitle,

often in a diﬀerent language. You can set a default

subtitle language with this setting.

Language Settings

Display Menu

Select a language for the [Setup] menu and on-

screen display.

If available, you can also select a subtitle

language while viewing digital TV viewing, press

SUBTITLE repeatedly.

If subtitles are available, the DTV subtitle icon

appears on the program information display to

indicate that you can select one of those subtitle

options with the SUBTITLE button.

Disc Menu/Disc Audio/Disc Subtitle

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

Note

[Original]

DTV Subtitle will appear only if provided by the

broadcaster.

Refers to the original language in which the

disc was recorded.

[Other]

Press ENTER (b) to select another language.

Use number buttons then press ENTER (b)

to enter the corresponding 4-digit number

according to the language code list on page 67

DivX Subtitle

If the movie subtitle is not displayed properly,

change the subtitle language code that supports

your language.

[Oﬀ] (Disc Subtitle only)

1. Display [Setup] menu.

Turn oﬀ Subtitle.

2. Use a/d/s/wto select the [DivX Subtitle],

and press ENTER (b).

Note

3. Use s/wto select a language code that

Depending on the disc, your language setting

supports your language.

may not work

Note

You can change the subtitle language code

while a movie is in playback. Press and hold

SUBTITLE for 3 seconds during playback. The

language code will appear. Use s/wto select

another language code until the subtitle is

displayed properly and then press ENTER (b).

DTV Audio

Digital channels sometimes provide multiple audio

tracks, often in a diﬀerent language. You can set a

default audio language with this setting.

Note

If provided by the broadcaster, you can

also select a diﬀerent audio language while

viewing TV by pressing AUDIO repeatedly.

RC689D-P.BITALLU_MFL65225535_ENG.indd 27

11. 2. 1. �� 12:12

28 System Setting

Sampling Freq.

Audio Settings

If your receiver or ampliﬁer is NOT capable of

handling 96 kHz signals, select 48 kHz. When this

choice is made, this unit will automatically convert

any 96 kHz signals to 48 kHz so your system can

decode them. If your receiver or ampliﬁer is capable

of handling 96 kHz signals, select 96 kHz. When

this choice is made, this unit will pass each type of

signal through without any further processing.

Each DVD disc has a variety of audio output

options. Set the recorder’s Audio Output according

to the type of audio system you use.

Dolby Digital

[PCM]

Select when connected to a 2-channel digital

stereo ampliﬁer. The Recorder’s digital audio

outputs sounds in the PCM 2ch format when

you play a DVD video disc recorded on the

Dolby Digital recording system.

DRC (Dynamic Range Control)

With the DVD format, you can hear a program’s

sound track in the most accurate and realistic

presentation possible, thanks to digital audio

technology. However, you may wish to compress

the dynamic range of the audio output (the

diﬀerence between the loudest sounds and the

quietest ones). Then, you may listen to a movie at

a lower volume without losing clarity of sound. Set

DRC to ON for this eﬀect.

[Bitstream]

Select [Bitstream] if you connected the

Recorder’s DIGITAL OUT jack to a Dolby Digital

decoder (or an ampliﬁer or other equipment

with a Dolby Digital decoder).

DTS

[OFF]

If you select [OFF], the DTS signal is not output

through the DIGITAL OUT jack.

[Bitstream]

Select [Bitstream] if you connected the

Recorder’s DIGITAL OUT jack to a DTS decoder

(or an ampliﬁer or other equipment with a DTS

decoder).

MPEG

[PCM]

Select when connected to a 2-channel digital

stereo ampliﬁer. The Recorder’s digital audio

outputs sounds in the PCM 2ch format when

you play a DVD video disc recorded on the

MPEG2 recording system.

[Bitstream]

Select [Bitstream] if you connected the

Recorder’s DIGITAL OUT jack to a MPEG

decoder (or an ampliﬁer or other equipment

with a MPEG decoder).

RC689D-P.BITALLU_MFL65225535_ENG.indd 28

11. 2. 1. �� 12:12

System Setting 29

DTV Rating

Viewing of some digital TV programmes can be

limited according to the age limit you set.

Lock Settings

1. Display [Setup] menu.

Lock System

2. Use s/wto select [LOCK] and press ENTER

Allows you to set up speciﬁc programs and ratings

through blocking schemes. Also allows you to

activate or disable all of the lock schemes previously

set up. A password is required to gain access to the

lock menu options. When the Lock System is set to

[OFF], the DTV Rating is not eﬀective.

(b).

3. Use s/wto select [DTV Rating] and press

ENTER (b).

4. Input the password using numerical buttons.

If you have not set your password yet, input

and press ENTER (b).

1. Select [Lock System] option then press d.

2. To access the Lock Menu options, you must

input the 4-digit password you created.

If you have not yet entered a password you are

prompted to do so. Input a 4-digit password.

Enter it again to verify. If you make a mistake,

press CLEAR repeatedly to delete numbers one

by one then correct it.

3. Select [ON] or [OFF] using the s/wbuttons.

5. Use s/wto set the limitation level and press

4. Press ENTER (b) to conﬁrm your setting.

ENTER (b).

[No Control]

DVD Rating

You can view all programs.

1. Select a rating from 1 to 8 using the s/w

buttons.

[4 ~ 18 Year(s)]

If you select [No Limit], parental control is not

active and the disc plays in full.

[1]-[8]

Rating one (1) has the most restrictions and

rating eight (8) is the least restrictive

[No Limit]

If you select [No Limit], parental

control is not active and the disc plays in full.

2. Press ENTER (b) to conﬁrm your rating

selection, then press HOME (n) to exit the

menu.

3. Press EJECT, OPEN/CLOSE (B) to activate

parental control.

Note

If you set a rating for the recorder, all disc

scenes with the same rating or lower are

played. Higher rated scenes are not played

unless an alternate scene is available on the

disc. The alternative must have the same

rating or a lower one. If no suitable alternative

is found, playback stops. You must enter the

4-digit password or change the rating level in

order to play the disc.

RC689D-P.BITALLU_MFL65225535_ENG.indd 29

11. 2. 1. �� 12:12

30 System Setting

Set Password

DivX Reg. Code

1. Select [Set Password] option then press d.

We provide you the DivX® VOD (Video On Demand)

registration code that allows you to rent and

purchase videos using the DivX® VOD service. For

more information, visit www.divx.com/vod.

2. Follow step 2 as shown in [Lock System] above.

[Change]

1. Select [DivX Reg. Code] option then press d.

Enter the new password twice after entering

the current password.

2. Press while enter is selected and the registration

code will appear.

[Delete]

3. Use the registration code to purchase or rent

the videos from DivX® VOD service at www.divx.

com/vod. Follow the instructions and download

the video onto a disc for playback on this unit.

Delete the current password after entering the

current password. If you delete password, All of

Rating options are set to default.

3. Press HOME (n) to exit the menu.

Note

All the downloaded videos from DivX® VOD

can only be played back on this recorder.

If you forget your password

If you forget your password, you can reset it

using the following steps.

DivX Registration Code

1. Press HOME (n) and the Home menu

ABOUT DIVX VIDEO: DivX® is a digital video format

created by DivX, Inc. This is an oﬃcial DivX Certiﬁed

device that plays DivX video.

appears.

2. Select [Setup] and press ENTER (b).

Visit www.divx.com for more information and software

tools to convert your ﬁles into DivX video.

3. Input the 6-digit number [210499]. When

the message appears, select [OK] then press

ENTER (b). The password will be reset.

4. Enter a new password as described above.

If you delete your password, all ratings will be

reset to the default setting. The default setting

is to allow all programs to be viewed in full.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed®

device must be registered in order in to play DivX

Video-on-Demand (VOD) content. To generate the

registration code, locate the DivX VOD section in the

device setup menu. Go to vod.divx.com with this

code to complete the registration process and learn

more about DivX VOD.

Area Code

Enter the Area Code whose standards were used

to rate the DVD video disc, based on the list in the

reference chapter (see page 66).

1. Select [Area Code] option then press d.

2. Follow step 2 as shown [Lock System].

3. Select the ﬁrst character using s/wbuttons.

4. Shift the cursor using dbuttons and select the

second character using s/wbuttons.

5. Press ENTER (b) to conﬁrm your area code

selection, then press HOME (n) to exit the

menu.

RC689D-P.BITALLU_MFL65225535_ENG.indd 30

11. 2. 1. �� 12:12

System Setting 31

DV Rec Audio

Recording Settings

You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel

DV IN jack. Some digital camcorders have two

stereo tracks for audio. One is recorded at the time

of shooting; the other is for overdubbing after

shooting.

Rec Mode Set

You can set the picture quality for recording; XP

(High Quality), SP (Standard Quality), LP (Low

Quality), EP (Extend Quality), MLP (Maximum Long

Play)

[Audio 1]

On the Audio 1 setting, the sound that was

recorded while shooting is used..

1. Select the [Rec Mode Set] option then press d.

2. Use s/w to select a desired Rec Mode Set (XP,

[Audio 2]

SP, LP, EP or MLP).

On the Audio 2 setting, the overdubbed sound

is used.

[XP] – Highest quality setting, gives about 1

hour of recording time on a DVD (4.7GB).

[SP] – Default quality, suﬃcient for most

applications, gives about 2 hours of recording

time on a DVD (4.7GB).

TV Rec Audio

When TV recording with bilingual, you can choose

audio channel to record.

[LP] – Slightly lower video quality, gives about

4 hours of recording time on a DVD disc

(4.7GB).

[Main+Sub]

Main language and Sub language.

[EP] – Low video quality, gives about 6 hours of

recording time on a DVD (4.7GB).

[Main]

Main language only

[MLP] – The longest recording time with the

lowest video quality, gives you about 14 hours

of recording time on a DVD (4.7GB).

[Sub]

Sub language only.

Note

Auto Chapter

You may see a fragmented picture or distorted

subtitle during playing back the contents

recorded in EP and MLP mode.

When DVD recording, chapter markers are put in

speciﬁed setting. You can change this interval to

5 minutes, 10 minutes or 15 minutes. If you select

[None], switch oﬀ automatic chapter marking

altogether with the [None] setting.

Rec Aspect

When recording, you can set the recording aspect

ratio to suit the material you’re recording (16:9 or

4:3).

Note

When DVD recording, you can set the

recording aspect ratio to suit the material

you’re recording (16:9 or 4:3).

RC689D-P.BITALLU_MFL65225535_ENG.indd 31

11. 2. 1. �� 12:12

32 System Setting

Disc Settings

Disc Format

Finalize

Finalizing [ﬁxes] the recordings in place so that

the disc can be played on a regular DVD player

or computer equipped with a suitable DVD-ROM

drive.

If you load a completely blank disc, the recorder will

initialize the disc.

Finalizing a disc creates a menu screen for

navigating the disc. This is accessed by pressing

MENU/LIST or TITLE.

[DVD-R]

Caution

Once you have ﬁnalized a DVD-R and

DVD+R disc, you cannot edit or record

anything else on that disc.

The recorder initialize the disc to Video mode.

The recording mode will always be Video

mode.

[DVD-RW/DVD+RW/DVD+R(DL)]

You can record and edit a DVD-RW disc by

choosing [Unﬁnalize] option.

The Initialize menu will appears. Select

[OK] then press ENTER (b). DVD-RW disc is

initialized to Video mode.

You can edit or record on the DVD+RW disc

even after ﬁnalizing.

Also, you can reformat the DVD-RW/DVD+RW from

the Setup menu as below.

1. Select [Finalize] option then press d.

1. Select [Disc Format] option then press d.

2. Press ENTER (b) while [Finalize] is selected.

2. Press ENTER (b) while [Start] is selected.

Finalize menu appears.

Format Disc menu appears.

3. Select [OK] then press ENTER (b).

3. Use a/dto select a desired mode (VR Mode

or Video Mode) then press ENTER (b).

Conﬁrm message will appear.

The recorder starts ﬁnalizing the disc.

Note

For DVD+RW discs, go to step 4.

How long ﬁnalization takes depends on the

type of disc, how much is recorded on the

disc, and the number of titles on the disc.

4. Use a/dto select [OK] then press ENTER (b).

It takes a few moments to initialize the disc.

DVD+R DL disc can take up to 30 minutes

to ﬁnalize.

Caution

If you want to change the disc format,

everything recorded on the disc will be erased.

If you load a DVD-RW that has already been

ﬁnalized, you can‘Unﬁnalize’it by choosing

Unﬁnalize from the Finalize menu. After

doing this, you can edit and re-record onto

the disc.

You cannot unﬁnalize a DVD-R and DVD+R

disc.

If [Disc Protect] option is set to [ON], the

ﬁnalize is not available. To ﬁnalize, set [Disc

Protect] option to [OFF].

RC689D-P.BITALLU_MFL65225535_ENG.indd 32

11. 2. 1. �� 12:12

System Setting 33

Disc Label

[MENU/LIST, DISPLAY]

Use this to enter a name for the disc. This name

appears when you display disc information on-

screen.

Switches the keyboard type (English/Latin

Capital, English/Latin Lowercase, Symbols) 6

Choose OK then press ENTER (b) to ﬁx the

name and return to the Setup menu.

The disc name can be up to 32 characters long.

For discs formatted on a diﬀerent Recorder, you will

see only a limited character set.

6. Press HOME to exit the menu.

Disc Protect

When recording in DVD+RW / +R disc or VR mode

formatted DVD-RW disc, set to ON to prevent

accidental recording, editing or deleting of the

disc loaded. If you need to unlock the disc to make

edits, select OFF.

1. Display [Setup] menu.

2. Use s/wto select the [Disc Label] option.

3. Press dto move to the third level.

[Edit] icon is highlighted.

4. Press ENTER (b).

Keyboard menu appears.

5. Enter a name for the disc. Use a/d/s/w

to select a character then press ENTER (b) to

conﬁrm your selection. Refer step 3 as shown

on page 24 (Station Rename).

Remote control buttons for entering a name

[z(PLAY)]

Inserts a space at the cursor position.

[M(PAUSE/STEP)]

Deletes the previous character at the cursor

position.

[STOP (Z), CLEAR]

Only for playing back Wide-Screen format

recordings (16:9).

[Numbers (0~9)]

Enters the character of corresponding location

on the selected column.

RC689D-P.BITALLU_MFL65225535_ENG.indd 33

11. 2. 1. �� 12:12

34 Operating

2. You can select an item by pressing s/wand

change or select the setting by pressing a/d.

For details about each item, see the pages in

parenthesis.

General Explanation of

On-Screen Display

[TITLE]

This manual gives basic instructions for operating

the Recorder. Some DVDs require speciﬁc operation

or allow only limited operation during playback.

When this occurs, the symbol appears on the

TV screen, indicating that the operation is not

permitted by the Recorder or is not available on the

disc.

Current title (or track) number/total number of

titles (or tracks) (page 38).

[CHAPTER]

Current chapter number/total number of

chapters (page 38).

[TIME]

Displaying Information While

Watching TV

Elapsed playing time (page 39)

[AUDIO]

During viewing the TV, press DISPLAY to display/

remove the information displayed on-screen.

Selected audio language (DVD VIDEO only) or

audio channel (page 40).

e.g., when DVD-RW in VR mode is inserted.

[SUBTITLE]

Selected subtitle (page 40).

[ANGLE]

Selected angle/total number of angles (page

39).

[SOUND]

Selected sound mode (page 40).

3. To remove the on-screen display, press DISPLAY

or RETURN(x) repeatedly until it disappears.

Displaying Information on-

screen

You can display various information about the disc

or tape loaded on-screen.

Note

If no button is pressed for 7 seconds, the on-

screen display disappears.

1. Press DISPLAY once to show current status.

Example : DVD-Video disc.

2. Press DISPLAY once again to show various

playback information. The items displayed diﬀer

depending on the disc type or playing status.

RC689D-P.BITALLU_MFL65225535_ENG.indd 34

11. 2. 1. �� 12:12

Operating 35

To navigate through programs on

the Guides

TV Viewing

Use a/d/s/won your remote control to

navigate the guide screen.

Viewing the EPG (Electronic

Programme Guide)

You can move faster through programs by scrolling

page-by-page with the C or V buttons on

the remote control. Each button stroke scrolls one

page up or down.

The

schedule and

Electronic Programme Guide

program information for digital programs. They also

provide local over-the-air programs information

including conventional digital programs. Use the

To tune to another current channel

Use a/d/s/wto select a current channel then

press ENTER (b). You can watch the channel.

to ﬁnd programs

Electronic Programme Guide

easily and conveniently and to view schedule and

descriptive program information for the programs.

To display the Full Information

window

You can view detail informations for the highlighted

program. Press blue color button to display detail

information window. To exit the detail information

window, press blue color button again.

To Display the Program Guide

Press the EPG button on your remote control.

To Exit the Program Guide

Press the RETURN (x) button to return to the last

program you tuned to.

To change guide menu

The guide screen provides two search menus.

Press yellow color button when the Program Guide

is displayed.

Now/Next: The screen shows now and next

programs.

To change date

When the Program Guide with 8 days is displayed,

you can also change the date of the Program Guide

by pressing the green color button then use a/d

to select a date then press ENTER (b).

8 Days: The screen shows programs within 8

days.

RC689D-P.BITALLU_MFL65225535_ENG.indd 35

11. 2. 1. �� 12:12

36 Operating

Timer Recording with Program

Guide

Displaying Channel List and

Changing Channel

You can set a timer record using program guide

with 8 days.

You can display channel list using the ENTER (b)

button and switch into other channel on the

channel list.

1. Display Program Guide with 8 days.

1. Press ENTER (b) while watching a program to

2. Select a program then press red color button.

The red timer icon will be displayed and the

program will be memorized by the recorder.

You can check the programming on the Timer

Record List menu (see page 50).

display the channel list.

2. Select your desired channel using the s/w

and press ENTER (b) to change the channel.

3. To release the timer recording, select the

program then press red color button.

The red timer icon disappears.

Switching Program List

You can switch the program list to DIGITAL TV,

ANALOG TV, or RADIO.

1. Press wto move the highlight position to top of

Program Selection

You can select a program as shown below.

the program list.

2. Press a/dto select a [DIGITAL TV], [ANALOG

TV], or [RADIO]. Selected program list appears.

Number buttons

Use Number (0-9) buttons to select a program

directly.

FAV button

Press to scroll through your favorite programs.

PR +/– buttons

Use PR +/– on the remote control or PROG s/w

on the front panel to cycle the recorder through

the programs in memory.

Displaying the Favorite Program List

You can display favorite channel list: The list of the

favorite channels with several-groups that you can

organise channels by your private taste.

Program List

Three types of program lists are provided for easy

and quick program searching.

Note

To set a favorite program, use [Program Edit]

option in the Setup menu. (See page 23-24.)

ANALOG TV: The list of all analog TV programs.

DIGITAL TV: The list of all digital TV programs.

RADIO: The list of all Radio programs.

1. Press ENTER (b) while watching a program to

display the program list.

2. Press Red button. The favorite options appears.

3. Press s/wto select a favorite option then

press ENTER (b).

RC689D-P.BITALLU_MFL65225535_ENG.indd 36

11. 2. 1. �� 12:12

Operating 37

Teletext on/off

1. Press TEXT to switch to teletext.

Teletext Operation

Teletext is an optional function, therefore only

those with the teletext system can receive the

teletext broadcast.

The initial page or last page appears on the

screen.

Two page numbers, TV station name, date and

time are displayed on the screen headline. The

ﬁrst page number indicates your selection,

while the second shows the current page

displayed.

Teletext is a free service broadcast by some TV

stations which gives up-to-the-minute information

on news, weather, television programs, share prices

and many other topics.

The teletext decoder can support the SIMPLE

systems. SIMPLE (standard teletext) consists of a

number of pages which are selected by directly

entering the corresponding page number.

2. Press TEXT or RETURN (x) to switch oﬀ

teletext.

Caution

If your TV is in zoom mode, the Teletext

menu screen may be cut oﬀ.

Teletext in Service

In this case, set the TV’s zoom mode to

normal to display the menu screen properly.

The recorder gives you access to teletext which is

greatly improved in various aspects such as text

and graphics. This teletext can be accessed by

special teletext services and speciﬁc services which

broadcast teletext.

Page selection

1. Enter the desired page number as a three digit

number with the numbered buttons.

If during selection you press a wrong number,

you must complete the three digit number and

then reenter the correct page number.

2. Use RED/GREEN buttons to move up and down

pages.

1. Press number or PR (+/-) buttons to select a

program which broadcast teletext.

2. Press TEXT to access on the teletext.

3. Follow the indications on teletext and move

onto the next or previous step by pressing color

(RED or GREEN) or SKIP (C/V) buttons and

so on.

4. Press TEXT or RETURN (x) to switch oﬀ teletext

and return to TV viewing.

RC689D-P.BITALLU_MFL65225535_ENG.indd 37

11. 2. 1. �� 12:12

38 Operating

General Features

Playing a DVD

Playback Setup

Note

Unless stated otherwise, all operations

described use the remote control. Some

features may also be available on the Setup

menu.

Before using the remote control, press the DVD

button to select the device to be operated.

Turn the TV on and select the video input source

connected to the Recorder.

Moving to another TITLE

When a disc has more than one title, you can move

to another title as follows:

Audio system: Turn the audio system on and select

the input source connected to the Recorder.

1. Press OPEN/CLOSE (B) to open the disc tray.

Press DISPLAY twice then use s/wto select the

title icon. Then, press the appropriate numbered

button (0-9) or a/dto select a title number.

2. Load your chosen disc in the tray, with the

playback side down.

3. Press OPEN/CLOSE (B) to close the tray.

READ appears on the display window, and

playback starts automatically. If playback does

not start, press z(PLAY).

Moving to another CHAPTER/

TRACK

When a title on a disc has more than one chapter/

track, you can move to another chapter/track as

follows:

In some cases, the disc menu might appear

instead.

Note

Press SKIP (C/V) brieﬂy during playback to

select the next chapter/track or to return to the

beginning of the current chapter/track.

If a menu screen is displayed

The menu screen may be displayed ﬁrst

after loading a DVD which contains a menu.

Press SKIP (C) twice brieﬂy to step back to the

previous chapter/track.

Use the a/d/s/wbuttons to select the

title/chapter you want to view, then press

ENTER (b) to start playback.

To go directly to any chapter/track during playback,

press DISPLAY twice. Then, use s/wto select

chapter icon (or select track icon). Then, enter the

chapter/track number using the numbered buttons

(0-9) or press a/d.

Press TITLE or MENU/LIST to return to the

menu screen.

If Parental Control is set and the disc is not

within the Rating settings (not authorized),

the 4-digit code must be entered and/

or the disc must be authorized (see“DVD

Rating”, on page 29).

1. Press SCAN (cor v) during playback.

The recorder will now go into SEARCH mode.

DVDs may have a Region Code. Your

recorder will not play discs that have a

region code diﬀerent from your recorder.

The region code for this recorder is 2 (two).

channels for cable subscribers.

2. Press SCAN (cor v) to select the required

speed: a(Reverse play), c, ca, cc,

cca, ccc (backward) or v,

dv, vv, dvv, vvv

(forward).

With a DivX disc the Search speed changes:

c, ca, cc, cca (backward)

or v, dv, vv, dvv (forward).

3. To exit SEARCH mode, press z(PLAY).

RC689D-P.BITALLU_MFL65225535_ENG.indd 38

11. 2. 1. �� 12:12

Operating 39

4. Within 7 seconds, press ENTER (b) to conﬁrm

Still Picture and Frame-by-Frame

Playback

the start time.

Playback starts from the selected time on the

disc.

1. Press PAUSE/STEP (M) during playback.

The recorder will now go into PAUSE mode.

2. You can advance or back up the picture frame-

by frame by pressing a/drepeatedly during

PAUSE mode.

Checking the Contents of DVD Video

Discs:

Menus DVDs may contain menus that allow you

to access special features. To open the disc menu,

press MENU/LIST. Then, press the appropriate

number button to select an option. Or, use the a/

d/s/wbuttons to highlight your selection, then

press ENTER (b).

3. To exit PAUSE mode, press z (PLAY).

Note

The picture frame-by-frame in reverse is not

available for Video CD.

You can advance the picture frame-

by-frame by pressing PAUSE/STEP (M)

repeatedly on the remote control.

Title Menu

1. Press TITLE.

If the current title has a menu, the menu will

appear on the TV screen. Otherwise, the disc

menu may appear.

Slow Motion

1. Press PAUSE/STEP (M) during playback.

2. The menu may contain camera angles, spoken

language and subtitle options, and chapters for

the title.

The recorder will now go into PAUSE mode.

2. Press SCAN (cor v) during PAUSE mode.

The Recorder will enter SLOW mode.

3. Use the SCAN (cor v) to select the

required speed:

Disc Menu

a!1/16, a!1/8, a!1/4, or a!1/2

(backward), or !d1/16, !d1/8, !d1/4, or !d

1/2 (forward).

1. Press MENU/LIST.

The disc menu is displayed.

2. To remove the disc menu, press MENU/LIST

again.

4. To exit Slow Motion mode, press z (PLAY).

Time Search

Camera Angle

The Time Search function allows you to start

playing at any chosen time on the disc.

If the disc contains scenes recorded at diﬀerent

camera angles, you can change to a diﬀerent

camera angle during playback.

1. Press DISPLAY twice during playback.

The on-screen display appears on the TV screen.

The Time Search box shows the elapsed playing

time of the current disc.

1. Press DISPLAY twice during playback.

Use s/wto select the ANGLE icon.

3. Press a/drepeatedly to select a desired angle.

2. Within 7 seconds, use s/wto select the Time

Search icon in the on-screen display.

Note

The“-:--:--”appears in the Time Search box.

The Camera Angle icon is displayed on the TV

screen when alternate angles are available.

3. Within 7 seconds, use the number buttons

to enter the required start time. Enter hours,

minutes, and seconds from left to right in the

box.

You can not enter an invalid time.

If you enter the wrong numbers, press a/dto

move the under bar (_) to the wrong number.

Then enter the correct numbers.

RC689D-P.BITALLU_MFL65225535_ENG.indd 39

11. 2. 1. �� 12:12

40 Operating

Changing the Audio Soundtrack

Last Condition Memory

Press AUDIO then press a/drepeatedly during

playback to hear a diﬀerent audio language or

audio soundtrack if available.

This Recorder memorizes last scene from the

last disc that is viewed. The last scene remains in

memory even if you remove the disc from the

Recorder or switch oﬀ the Recorder. If you load a

disc that has the scene memorized, the scene is

automatically recalled.

Note

Some discs feature both Dolby Digital and

DTS soundtracks. There is no analog audio

output when DTS is selected. To listen to the

DTS soundtrack, connect this recorder to a

DTS decoder via one of the digital outputs. See

page 17 for connection details.

Note

Settings are stored in memory for use any

time.

This recorder does not memorize settings of

a disc if you switch oﬀ the recorder before

commencing to play it.

Changing the Audio Channel

With DVD-RW discs recorded in VR mode that have

both a main and a Bilingual audio channel, you can

switch between Main (L), Bilingual (R), or a mix of

both (Main + Bilingual) by pressing AUDIO.

3D Surround

This unit can produce a 3D Surround eﬀect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the ﬁve

or more speakers normally required to listen to

multichannel audio from a home theater system.

1. Press DISPLAY twice during playback. The On-

Screen Display appears on the TV screen.

2. Use s/wto select the Sound icon in the On-

Screen Display.

3. Use a/dto select“3D SUR”.

To turn oﬀ the 3D Surround eﬀect, select

“NORMAL”.

Subtitles

Press SUBTITLE then press a/drepeatedly during

playback to see the diﬀerent subtitle languages.

RC689D-P.BITALLU_MFL65225535_ENG.indd 40

11. 2. 1. �� 12:12

Operating 41

Tracking Control

Auto Tracking

Playing a VCR

The automatic tracking function adjusts the picture

to remove snow or streaks.

The AUTO TRACKING function works in the

following cases:

Preparation

Before using the remote control, press the VCR

button to select the device to be operated.

A tape is played back for the ﬁrst time.

Tape speed (SP, LP) changes.

Turn the TV on and select the video input source

connected to the Recorder.

Streaks or snow appear because of scratches on

the tape.

Audio system: Turn the audio system on and

select the input source connected to the

Recorder.

Manual Tracking

If noise appears on the screen during playback,

press either PR/TRK (s/w) on the remote control

or PROG. (s/w) on the front panel until the noise

on the screen is reduced.

Normal Playback

1. Insert a prerecorded video cassette.

The indicator will light and the Recorder will

powerup automatically.

In case of vertical jitter, adjust these controls very

carefully.

Make sure that the TIMER indicator in the display

window is not lighted. If it is, press POWER once.

Tracking is automatically reset to normal

when the tape is ejected or the power cord is

unplugged for more than 3 seconds.

If a tape without a safety tab is inserted, the

Recorder will start playback automatically.

2. Press z (PLAY) once.

Special Effect Playback

Special eﬀects playback notes

PLAY icon appears on the TV screen.

It is not necessary to select the tape speed for

playback. It will be automatically selected by

the Recorder.

Horizontal lines (noise bars) will appear on the TV

screen. This is normal.

The audio is automatically muted during special

eﬀect modes, so there is no sound during search.

3. Press STOP (Z) to stop playback.

STOP icon appears on the TV screen.

During the high-speed picture search modes,

a short time is needed to stabilize tape speed

when re-entering the PLAY mode. Slight

If the tape reaches the end before STOP (Z) is

pressed, the Recorder will automatically stop,

rewind and eject the tape, and turn itself oﬀ.

interference may be observed during this time.

Note

If you wish to watch the DVD playback

during the VCR playback, press DVD (or

DVD/VCR) to change to DVD mode and

perform the DVD playback.

This function lets you visually search forward and

backward for a desired scene on your tape.

1. Press SCAN (cor v) during playback.

The Recorder will be activated in the SEARCH

mode.

You cannot playback for the both DVD and

VCR at the same time.

If the Recorder is left in the SEARCH mode

for more than 3 minutes, the Recorder will

automatically enter the PLAY mode, to protect

the tape and video heads.

2. To return to playback, press z(PLAY).

RC689D-P.BITALLU_MFL65225535_ENG.indd 41

11. 2. 1. �� 12:12

42 Operating

Still Picture and Frame-by-Frame Playback

Playing a DivX Movie Disc

Using this unit you can play DivX disc. Before

playing DivX ﬁles, read“About DivX movie ﬁles”on

right.

1. Press M(PAUSE/STEP) during playback.

A still picture appears on the TV screen.

If a still picture vibrates vertically, stabilize it by

using PR/TRK (s/w) on the remote control.

1. Insert a disc and close the tray. The Movie menu

appears on the TV screen.

If the Recorder is left in the STILL mode for more

than 5 minutes, the Recorder will automatically

enter the STOP mode to protect the tape and

video heads.

2. Press s/wto select a folder, and press ENTER

(b). A list of ﬁles in the folder appears. If you

are in a ﬁle list and want to return to the Folder

list, use the s/wbuttons on the remote to

highlight g and press ENTER (b).

2. Press M(PAUSE/STEP) repeatedly to advance the

video picture one frame at a time while viewing

a still picture.

3. To return to playback, press z (PLAY).

Slow Motion

1. While in still mode, press SCAN (v).

The tape will be played back at a speed 1/19

times slower than the normal speed.

During slow playback, use PR/TRK (s/w) on the

Remote Control to minimize noise bands.

3. If you want to view a particular ﬁle, press s/w

to highlight a ﬁle and press z (PLAY).

You can use variable playback functions. Refer

to pages 38-40.

If slow motion mode continues for more than 3

minutes, the Recorder will automatically change

to normal play mode.

2. To return to playback, press z(PLAY).

4. Press Z(STOP) to stop the playback.

Counter Memory Function

The Movie menu appears.

This is useful if there is a section of tape you want

to view immediately after recording or if you want

to return to the same point several times.

Note

On a CD with MP3/WMA, JPEG and MOVIE ﬁle,

you can switch Music, Photo and Movie menu.

Press TITLE.

1. Begin recording or playing a tape.

2. Press DISPLAY repeatedly to display the real-

time counter on the TV screen.

3. At the point you want to locate later, reset the

realtime counter to 0:00:00 by pressing CLEAR.

Continue to play or record.

Notice for displaying the DivX

subtitle

If the subtitle does not display properly during

playback, press M(PAUSE/STEP) when the subtitle

is displayed and press and hold SUBTITLE about

3 seconds then press a/dto select another

language code until the subtitle is displayed

properly.

4. Press STOP (Z) when recording or playback

ﬁnishes.

5. Press x (RETURN).

The tape automatically stops when the tape

counter returns to about“0:00:00”.

RC689D-P.BITALLU_MFL65225535_ENG.indd 42

11. 2. 1. �� 12:12

Operating 43

Playable Audio format

Movie menu options

“AC3”, “PCM”, “MP2”, “MP3”, “WMA”

1. Press s/wto select a folder/ﬁle on the Movie

menu then press ENTER (b).

Sampling frequency: within 8 - 48 kHz (MP3),

within 32 - 48kHz (WMA)

Movie menu options appear.

2. Press s/wto select an option, and press ENTER

Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps

(WMA)

(b).

CD-R format

[Play]

ISO 9660 and JOLIET

DVD R/RW format

ISO 9660 (UDF Bridge format)

Start playback the selected title.

[Open]

Opens the folder and a list of ﬁles in the folder

appears.

About DivX movie ﬁles

DivX disc compatibility with this recorder is limited

as follows:

Available resolution size of the DivX ﬁle is under

720x576 (W x H) pixel.

The DivX subtitle ﬁle name has to be identiﬁed

with the DivX ﬁle name to display by this unit.

The total number of ﬁles and folders on the disc

should be less than 1999.

If the number of the screen frame is over 29.97

frames per second, this unit may not operate

normally.

If the video and audio structure of recorded ﬁle

is not interleaved, returns to the menu screen.

If the ﬁle is recorded with GMC, the unit supports

only 1-point of the record level.

* GMC?

GMC is the acronym for Global Motion

Compensation. It is an encoding tool speciﬁed in

MPEG4 standard. Some MPEG4 encoders, like DivX,

have this option.

There are diﬀerent levels of GMC encoding, usually

called 1-point, 2-point, or 3-point GMC.

Playable DivX ﬁle

“.avi”, “.divx”

Playable DivX subtitle

“.smi”, “.srt ”, “.sub (Micro DVD format only)”, “.txt (Micro

DVD format only)”

DivX subtitle except those listed above is not

displayed on the TV screen.

Playable Codec format

“DIV3”, “MP43”, “DIVX”, “DX50”

RC689D-P.BITALLU_MFL65225535_ENG.indd 43

11. 2. 1. �� 12:12

44 Operating

Music menu options

1. To display menu options, select a track (or

Playing an Audio CD or MP3/

WMA Disc

The Recorder can play audio CDs. Also, the Recorder

can play MP3/WMA formatted recordings on CD-

ROM, CD-R, CD-RW, DVD R or DVD RW disc.

folder) on the menu then press ENTER (b).

2. Use s/wto select an option then press ENTER

(b) to conﬁrm your selection.

Before playing MP3/WMA recordings, read the

notes on MP3/WMA Recordings on page 45.

Music-Audio CD menu options

1. Insert a disc and close the tray.

AUDIO CD or MP3/WMA CD menu appears on

the TV screen.

[Play]

Starts playback the selected track.

[Random]

Plays tracks in random order.

[Program add]

Adds the track(s) to Program List.

AUDIO CD Menu

MP3/WMA CD Menu

Music-CD menu options

2. Use s/wto select a track then press z(PLAY).

Playback starts.

• When you select a track.

[Play]

During playback, the current track’s elapsed

playing time will appear on the display window

and menu.

Starts playback the selected track.

[Random]

Playback will stop at the end of the disc.

Plays tracks in random order.

[Program add]

Note

You can view TV channel or video input

source by pressing RETURN. If you want to

return to the Music menu, press MENU/LIST.

Adds the track(s) to Program List.

• When you select a folder.

If you select a MP3 and press DISPLAY, the

ﬁle informations are displayed. Press DISPLAY

again to remove the ﬁle informations.

[Open]

Displays sub-folders and MP3/WMA ﬁles only in

the folder.

If you select a folder and press DISPLAY, the

number of subfolders and number of MP3/

WMA ﬁles in the folder are displayed.

Pause

1. Press M(PAUSE/STEP) during playback.

If you are in a ﬁle list and want to return to

the Folder list, use the s/wto highlight

and press ENTER (b) to return to the

previous menu screen.

2. To return to playback, press z (PLAY) or press

M(PAUSE/STEP) again.

Moving to Another Track

3. To stop playback at any other time, press Z

Press SKIP (C or V) brieﬂy during playback

to go to the next track or to return to the

beginning of the current track.

(STOP).

Press SKIP (V) twice brieﬂy to step back to the

previous track.

On an Audio CD, to go directly to any track, enter

the track number using the numbered buttons

(0-9) during playback on the Track List.

RC689D-P.BITALLU_MFL65225535_ENG.indd 44

11. 2. 1. �� 12:12

Operating 45

Search (Audio CD only)

Viewing a JPEG File

The recorder can play discs with JPEG ﬁles.

Before playing JPEG recordings, read“Notes on

JPEG Recordings”on page 46.

1. Press SCAN (cor v) during playback.

The recorder will now go into SEARCH mode.

2. Press SCAN (cor v) to select the required

speed: c, ca, cc(backward) or

v, dv, vv(forward).

1. Insert a disc and close the tray.

The Photo menu appears on the TV screen.

Search speed and direction are indicated on the

menu screen.

2. Use a/d/s/wto select a folder, then press

ENTER (b). Open icon is highlighted on the left

side of the menu.

3. To exit SEARCH mode, press z (PLAY).

Notes on MP3/WMA Recordings

About MP3

An MP3 ﬁle is audio data compressed by using

the MPEG1 audio layer-3 ﬁle-coding scheme.We

call ﬁles that have the“.mp3”ﬁle extension“MP3

ﬁles”.

The recorder can not read an MP3 ﬁle that has a

ﬁle extension other than“.mp3”.

3. Press ENTER (b).

A list of ﬁles in the folder appears.

About WMA(Window Media Audio)

Note

An WMA ﬁle is a Microsoft audio compression

technology.

If the icon displays in the Photo menu, it

means you cannot see those JPEG ﬁles.

WMA(Windows Media Audio) oﬀers double the

audio.compression of the MP3 format.

4. Use a/d/s/wto select a ﬁle, then press

ENTER (b).

MP3/WMA Disc compatibility with this recorder

is limited as follows:

The options appear on the left side of the menu.

1. CD-R physical format should be“ISO 9660”and

“JOLIET”.

2. If you record MP3/WMA ﬁles using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD”etc., it is impossible to playback

MP3/WMA ﬁles.We recommend that you use

“Easy-CD Creator”, which creates an ISO9660 or

JOLIET ﬁle system.

3. Total number of ﬁles and folders on the disc

should be less than 1999.

Note

If you are in a ﬁle list and want to return

to the Folder list, use the s/wbuttons on

the remote to highlight the icon and press

ENTER (b).

This Recorder requires discs/recordings to meet

certain technical standards in order to achieve

optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are

many diﬀerent types of recordable disc formats

(including CD-R containing MP3 or WMA ﬁles) that

require certain pre-existing conditions (see above)

to insure compatible playback.

You can view TV channel or video input

source by pressing x (RETURN). If you

want to return to the Photo menu, press

MENU/LIST.

Customers should also note that permission is

required in order to download MP3/WMA ﬁles and

music from the Internet. Our company has no right

to grant such permission. Permission should always

be sought from the copyright owner.

RC689D-P.BITALLU_MFL65225535_ENG.indd 45

11. 2. 1. �� 12:12

46 Operating

5. Use s/wto select [Full Screen] option then

Notes on JPEG Recordings

press ENTER (b).

Depending on the size and number of the JPEG

ﬁles, it may take several minutes to read the

contents of the media. If you don’t see an on-

screen display after several minutes, some of the

ﬁles are too big — reduce the resolution of the

JPEG ﬁles to less than 4 mega pixels and burn

another disc.

The total number of ﬁles and folders are free but

the total number of ﬁles on the folder should be

less than 1999.

6. To stop viewing at any time, press Z(STOP).

The Photo menu reappears.

Some discs may be incompatible due to diﬀerent

recording formats or the condition of the discs.

When you are using software such as“Easy CD

Creator”to burn JPEG ﬁles on a CD-R, ensure that

all selected ﬁles have the“.jpg”extension before

copying them into the CD layout.

Skip Images

While viewing a picture, press SKIP (C or V)

once to advance to the next ﬁle or return to the

previous ﬁle.

If the ﬁles have“.jpe”extensions, please rename

them as“.jpg”ﬁles.

Rotate Images

Use s/wwhile viewing a picture to ﬂip the picture

clockwise or counterclockwise.

File names without the“.jpg”extension cannot be

read by this recorder, even though the ﬁles are

shown as JPEG image ﬁles in Windows Explorer®.

Progressive and lossless compression JPEG

image ﬁles are not supported.

View Slide Shows

1. Select [Slide Show] option on the Photo menu.

2. Press ENTER (b).

The Slide Show menu appears.

3. Use a/d/s/wto set the options.

[Object]

Selected ﬁle or All ﬁles.

[Speed]

Sets the speed for Slide Show (Slow, Normal,

or Fast).

4. Select the Start option then press ENTER (b) to

start the Slide Show.

5. Press Z (STOP) to stop the Slide Show and

returns to the Photo menu.

Note

Use the MARKER button to select multiple ﬁles.

RC689D-P.BITALLU_MFL65225535_ENG.indd 46

11. 2. 1. �� 12:12

Operating 47

The Delete Title option in the Title List (Original)

menu only hides the title, it does not actually

erase the title from the disc and increase the

recording time available (except for the last

recorded title on a DVD-RW disc in Video mode).

DVD Recording

Overwrite recording is available using DVD+RW

discs.

Notes for DVD recording

When using a DVD+R/RW, the recorder will

execute the Menu-making operation to update

the new title and editing when removing the

disc from the recorder.

This Recorder cannot record CD-R or CD-RW

discs.

Fingerprints and small scratches on a disc can

aﬀect playback and/or recording performance.

Please take proper care of your discs.

The recordable time is limited to 12 hours for a

title.

The company does not hold any responsibility

to compensate the contents which should have

been recorded, and any losses or damages (e.g.

losses of business proﬁt, or business intermission)

that may arise from malfunction of this recorder

(not recording/editing as intended).

If the unit detects the copy-protected signal

while recording, the recording will be paused

temporarily until the signal switchs to recordable

signal.

Recording time and picture quality

There are ﬁve preset recording quality modes:

The recording times shown are not exact

because the recorder uses variable bit-rate

video compression. This means that the exact

recording time will depend on the material

being recorded.

[XP] – Highest quality setting, gives about 1

hour of recording time on a DVD (4.7GB).

When recording a TV broadcast, if the reception

is poor or the picture contains interference, the

recording times may be shorter.

[SP] – Default quality, suﬃcient for most

applications, gives about 2 hours of recording

time on a DVD (4.7GB).

The unit cannot record the DTV caption on the

recordable DVD disc.

[LP] – Slightly lower video quality, gives about

4 hour of recording time on a DVD disc (4.7GB).

If you record still pictures or audio only, the

recording time may be longer.

[EP] – Low video quality, gives about 6 hour of

recording time on a DVD (4.7GB).

The displayed times for recording and time

remaining may not always add up to exactly the

length of the disc.

[MLP] – The longest recording time with the

lowest video quality, gives you about 14 hours

of recording time on a DVD (4.7GB).

The recording time available may decrease if you

heavily edit a disc.

Note

If using a DVD-RW disc, make sure you change

the recording format (Video mode or VR mode)

before you record anything on the disc. See page

26 (Initialize) for how to do this.

You may see a fragmented picture during

playing back the contents recorded in EP or

MLP mode.

When using a DVD-R or DVD+R disc, you can

keep recording until the disc is full, or until you

ﬁnalize the disc. Before you start a recording

session, check the amount of recording time left

on the disc.

When using a DVD-RW disc in Video mode,

recording time available will only increase if you

erase the last title recorded on the disc.

RC689D-P.BITALLU_MFL65225535_ENG.indd 47

11. 2. 1. �� 12:12

48 Operating

Restrictions on video recording

Selected Broadcast Audio Monitor

Broadcast Audio

Audio

You cannot record copy-protected video using

this recorder. Copy-protected video includes

DVD-Video discs and some satellite broadcasts.

If copy-protected material is encountered

during a recording, recording will pause or stop

automatically and an error message will be

displayed on-screen.

L Ch

MONO

R Ch

MONO MONO

MONO

STEREO

Left

Right

MONO

Right

MONO

MONO MONO

Video that is‘copy-once only’can only be

recorded using a DVD-RW disc in VR mode.

MONO +

SAP

Copy control signals Recordable disc

STEREO +

SAP

STEREO

SAP

STEREO

SAP

Copy-Free

-RW_VR-RW_Video

SAP

MONO

SAP

+RW

-R

MONO

MONO MONO

If you set the audio channel to SAP (Second Audio

Program), but there is no SAP channel being

broadcast, the main audio (mono or stereo) will be

recorded.

Copy-Once

Copy-Never

-RWVR

Ver.1.2 with CPRM*

Ver.1.1,

None

* The recorded disc can be played only on

CPRM compatible equipment

5. Press (REC) once to start recording.

The REC indicator lights in the display window.

6. Press Z(STOP) to stop recording.

Note

Basic Recording from a TV

The maximum numbers of DVD titles are as

show below;

Follow the instructions below to record a TV

program. Recording starts immediately and

continues until the disc is full or you stop the

recording.

- DVD-R/RW: 99

- DVD+R/RW: 49

If the Recorder is powered oﬀ during DVD

recording, the recording will not be saved.

1. Switch on the Recorder, select the device

(DVD) for recording and load a recordable disc.

Also make sure that the TV input is set to this

recorder.

2. Set a recording mode as necessary settings.

Refer to page 31.

3. Select the TV channel to record.

4. Use AUDIO to select the audio channel for

analog channel or audio language for digital

channel to record.

The table below shows what will be recorded

on the diﬀerent settings for diﬀerent types of

analog broadcast. The last column (Monitor

Audio) shows what you’ll hear as it is recording.

RC689D-P.BITALLU_MFL65225535_ENG.indd 48

11. 2. 1. �� 12:12

Operating 49

Instant Timer Recording

Instant Timer Recording allows you to make a

recording easily of a preset length without using

the program timer.

Timer Recording

1. Press HOME (n) and the Home menu appears.

2. Select [RECORD] > [Timer Record] and press

ENTER (b).

1. Follow steps 1-4 as shown left (Basic Recording

from a TV).

2. Press X(REC) repeatedly to select the recording

time length. Recording starts after the ﬁrst press.

DVD: Each subsequent press increases the

recording time by 10 minutes.

3. Select [NEW] and press ENTER (b).

The Timer Record menu will appear.

Checking the Recording Time

Press X(REC) or DISPLAY once to check

the recording time. The recalled setting will

automatically return to the TV screen for a moment.

Also, remaining time of recording is shown in the

display window.

[PR] – Choose a channel that memorized in

this Recorder, or one of the external inputs

from which to record (AV1 or AV2).

To Extend the Recording Time

The recording time can be extended anytime by

pressing X(REC).

Each subsequent press increases the recording

time by 10 minutes (DVD).

[Date] – Choose a date up to 1 month in

advance, or select a daily or weekly program.

[Start Time] – Set the recording start time.

To Pause the Recording

[End Time] – Set the recording end time.

1. Press M(PAUSE/STEP) to pause the recording.

[Repeat] – Choose a desired repeat (Once,

Daily (Monday - Friday), or Weekly).

2. When you want to continue recording, press M

(PAUSE/STEP) or X(REC).

4. Enter the necessary information for your timer

recording(s).

Note

If you press M(PAUSE/STEP) during the

a/d(left/right) – Move the cursor left/right

Instant Timer Recording, it will be canceled.

s/w(up/down) – Change the setting at the

current cursor position.

The Recorder will automatically power oﬀ

when the Instant Timer Recording ends.

Press RETURN (x) to return to the [Timer

Record List] menu.

5. Press ENTER (b) to save the program.

RC689D-P.BITALLU_MFL65225535_ENG.indd 49

11. 2. 1. �� 12:12

50 Operating

6. The [Rec. OK] on the [Check] ﬁeld on the [Timer

Record List] menu indicates the timer recording

is programmed correctly.

Checking Timer Recording Details

Programming can be checked whenever the

Recorder is turned on.

[Rec. OK] – Indicates the Timer Record is in

recordable condition.

1. Press HOME (n) and the Home menu appears.

2. Select [RECORD] > [Timer Record] and press

ENTER (b).

[No Disc] – There is no disc in the disc tray.

3. Use s/wto select a program.

[Invalid disc] – The inserted disc is not

recordable.

4. Press ENTER (b) to edit the selected program.

Timer Record menu appears.

[Unrecordable] – There is no space to record

on the disc.

[Lack Space] – The space on the disc is

insuﬃcient.

[Duplicate Date] – The space on the disc is

insuﬃcient.

7. Press RETURN (x) to exit the [Timer Record

List] menu.

Note

Canceling a Timer Recording

You can clear a timer setting anytime before the

recording actually starts.

You must insert a recordable disc.

The Timer indicator lights on the front panel

display.

Use s/wto select a program you want to erase

on the [Timer Record List] menu, then press CLEAR

and select [OK] then press ENTER (b).

The Recorder will record the audio

according to the current TV tuner setting.

Use AUDIO to select the audio channel for

analog channel to record before switching

the Recorder to Standby mode.

Stopping a Timer Recording in

Progress

After a timer recording has started, you can still

cancel the program.

For digital TV recording with multiple audio

languages, set audio language from the

[DTV Audio] in sub-menu of the Setup

menu (see page 27).

You can stop a timer recording in progress.

Press Z (STOP) and the conﬁrm message will

appear. Press ENTER (b) to stop the recording or

press RETURN (x) to continue the recording.

The Recorder will automatically power oﬀ

when the Timer Recording ends.

There is a short delay when a timer

recording ﬁnishes to conﬁrm the recorded

program. If two timer recordings are set

to record sequentially (one right after the

other), the very beginning of the later

program may not be recorded.

You must press Z(STOP) to stop the Timer

Recording.

The Timer Recording function allows you to

record up to 16 programs within a period of

one month.

RC689D-P.BITALLU_MFL65225535_ENG.indd 50

11. 2. 1. �� 12:12

Operating 51

Recording from External

Components

You can record from an external component, such

as a camcorder or VCR, connected to any of the

Recorder’s external inputs.

1. Make sure that the component you want

to record from is connected properly to the

Recorder. See page 19.

2. Press INPUT repeatedly to select the external

input to record from.

[AV1] – AV1 mounted on back panel.

[AV2] – AV IN 2 VIDEO, AUDIO (L/R) mounted

on front panel.

[DV] – DV Input mounted on front panel.

3. Load a recordable disc.

4. Set a recording mode as necessary settings.

Refer to page 31.

5. Press X(REC) once to start recording.

The REC indicator lights in the display window.

6. Press Z (STOP) to stop recording.

Note

Check that the Audio In settings DV Record

Audio are as you want them. See page 31.

If your source is copy-protected using

CopyGuard, you will not be able to record it

using this recorder. See Copyright on page

3 for more details.

Recording continues until you press Z

(STOP) or the disc is full.

To record for a ﬁxed length of time, see

[Instant Timer Recording] on page 49.

When unit is on any external inputs mode

(AV1, AV2 and DV) the PR (+/-) buttons

don’t work, press AV/INPUT (on remote)

repeatedly to select the TV mode, and then

select the TV channels.

RC689D-P.BITALLU_MFL65225535_ENG.indd 51

11. 2. 1. �� 12:12

52 Operating

a Current media.

DVD Editing

b Indicates the record mode, free space, and

elapsed time progress bar.

c Menu options: To display menu option, select

a title or chapter then press ENTER (b). The

options displayed diﬀer depending on the

disc type.

Title List and Chapter List

Menu Overview

Using the Title List menu you can edit video

content. The editing features available in the Title

List menu depend on whether you are editing

video on DVD, and whether you’re editing Original

content, or a Playlist.

[Play] – Start playback of the selected title or

chapter. The hidden titles and chapters on the

DVD+R/RW cannot be play back.

[Search]

There are two ways to edit VR mode DVD-RW

discs. You can directly edit the Original content of

the disc, or you can create and edit a Playlist. The

Playlist doesn’t actually change any of the content

on the disc, but just controls how the content is

played back.

[Chapter] : Displays Chapter List of the Title.

[Time] : Search time for you want start

point of the title.

[Delete] – Deletes the title or chapter. (page

55)

1. Press MENU/LIST to display the Title List menu.

Playback should be stopped when you do this.

[Move] – Moves chapter position on [Chapter

List - Playlist] menu (page 56).

When selecting titles, use the s/wbuttons to

display the previous/next page if there are more

than six titles.

[Protect] – Protects accidental recording,

editing or deleting of the title.(page 57)

[Edit] – Edits or Deletes a part of the title.

If you are editing a VR mode disc, press MENU/

LIST to switch between Original and Playlist

menu.

[Title Name] : Edits the title name. (page

55).

[Delete Part] : Deletes a part of the Title

(page 55).

Press DISPLAY to display the information of

selected title on the Title List menu.

[Divide] : Divides a title into two (page 57).

After selecting a title or chapter on the Title List

or Chapter List menu, then press ENTER (b). The

menu options on the left side of the menu. Use

s/wto select a option then press ENTER (b) to

conﬁrm your selection.

[Hide (Show)] : Hides (or Shows) the

selected title or chapter. (page 56-57)

[Playlist Add] – Adds the title or chapter to

the Playlist. (page 53)

2. To exit the Title List menu, press RETURN (x)

[Title] – Displays Title List of the chapter.

repeatedly.

[Combine] – Combines two chapters into

one (page 58).

[Full Play] – Starts playback of the selected

title including the hidden chapters.

d Currently selected title.

e Shows the selected title number and total

number of titles.

f Thumbnail.

g Shows the title name, recorded date, and

recording length.

RC689D-P.BITALLU_MFL65225535_ENG.indd 52

11. 2. 1. �� 12:12

Operating 53

Making a New Playlist

-RW_VR

VR Mode: Original and Playlist

Editing

Use this function to add an Original title or chapter

to the Playlist. When you do this, the whole title or

chapter are put into the Playlist (you can delete bits

you don’t need later - see [Deleting an Original or

Playlist title/chapter] on page 54).

Titles, Chapters and Parts

Titles in the disc’s original content contain one or

more chapters. When you add a disc’s title into the

Playlist, all the chapters within that title also added.

In other words, chapters in the Playlist behave

exactly as chapters on original content. From the

Original and Playlist menu you can add or delete

parts. Adding a chapter or title to the Playlist creates

a new title made up of a section (ie., chapter) of an

Original title. Deleting a part removes part of a title

from the Original or Playlist menu.

The title appears in the Playlist complete with

the chapter markers that appear in the Original.

However, if you add more chapter markers to the

Original later, these are not automatically copied

over into the Playlist title.

1. Choose a title or chapter on the [Title List-

Original] menu or [Chapter List-Original] menu

to put into the Playlist, then press ENTER (b).

The menu options appears on the left side of

the menu.

Caution

When editing using the Delete, Add and

Move functions, the start and end frames

may not be exactly as set in the start and

end point display.

2. Use s/wto select [Playlist Add] option then

press d.

During Playlist playback, you may notice a

momentary pause between edits. This is not

a malfunction.

Is editing a DVD like editing a video

tape?

No. When you edit a video tape you need one video

deck to play the original tape and another to record

the edits. With DVD, you edit by making a‘Playlist’of

what to play and when to play it. On playback, the

Recorder plays the disc according to the Playlist.

3. Select [New Playlist] then press ENTER (b).

The new title appears in the updated Playlist. All

chapters of the title are added to the Playlist.

About word ‘Original’ and ‘Playlist’

-RW_VR

Throughout this manual, you will often see the

words Original and Playlist to refer to the actual

content and the edited version.

Original: content refers to what’s actually

recorded on the disc.

Playlist: content refers to the edited version of

the disc — how the Original content is to be

played.

RC689D-P.BITALLU_MFL65225535_ENG.indd 53

11. 2. 1. �� 12:12

54 Operating

Note

Adding Additional Title / Chapters

to the Playlist

-RW_VR

It may not be possible to delete chapters that

are less than 3 seconds long.

1. Use a/d/s/wto choose a chapter or title

you want to delete on the [Title List] or [Chapter

List] menu then press ENTER (b).

You can add an Original title or chapter to add to a

Playlist title even if it is already registered.

1. Choose a title or chapter on the [Title List-

Original] menu or [Chapter List-Original] menu

to put into the Playlist, then press ENTER (b).

The menu options appears on the left side of

the screen.

The menu options appears on the left side of

the screen.

2. Select [Delete] option from the options on the

menu.

Example: Title List (DVD-RW)

2. Use s/wto select [Playlist Add] from menu

options then press d.

3. Press ENTER (b) to conﬁrm.

The conﬁrm message for deleting will appear.

3. Choose a Title List-Playlist that is already

registered to insert a title or chapter, then press

ENTER (b).

4. Use a/dto select [OK] then press ENTER (b).

The selected chapter or title is deleted.

After pressing ENTER (b), the new, updated

menu is displayed.

4. Repeat steps 1-3 to add additional title or

chapter on the Playlist.

5. Repeat steps 1 - 4 to continue to delete from

the menu.

You can view the added chapters on the

[Chapter List-Playlist] menu.

6. Press RETURN (x) repeatedly to exit the menu.

Note

When DVD+RW recording, the deleted title’s

name is changed to [Deleted Title].

If more than two titles are repeatedly

deleted, the titles are combined into one.

When you are deleting a title or chapter,

only the last one on DVD+R/RW, DVD-RW

(Video mode) increases remaining recording

time.

5. Press RETURN (x) to exit, or MENU/LIST to go

back to the [Title List-Original] menu.

The Chapter delete function is only available

on DVD-RW (VR mode).

Deleting an Original or Playlist Title/

Chapter

When you erase a title or chapter from the Playlist

menu, you only remove it from the Playlist; the title/

chapter remains in the Original menu.

If you choose to delete a title or chapter from

the Original (title/chapter) menu, the title or

chapter is actually deleted from the disc and the

remaining time available for recording increases.

Titles/chapters deleted from the Original are also

removed from the Playlist.

RC689D-P.BITALLU_MFL65225535_ENG.indd 54

11. 2. 1. �� 12:12

Operating 55

Deleting a Part

Naming a Title

-RW_VR

-RWVideo

+RW

-R

You can delete a part which you do not want in the

title.

You can name the titles.

1. Choose the title you want to name on the Title

List menu, then press ENTER (b).

The menu options appears on the left side of

the menu.

1. Use a/d/s/wto choose a title you want to

delete on the Title List menu then press ENTER

(b).

The options appears on the left side of the

menu.

2. Use s/wto select [Edit] > [Title Name] option

then press ENTER (b).

2. Select [Edit] > [Delete Part] option then press

ENTER (b).

Keyboard menu appears.

[Edit] menu appears on the TV screen.

Example: Edit (Delete Part) (DVD-VR)

3. Enter a name for the title. Use a/d/s/w

to select a character then press ENTER (b) to

conﬁrm your selection.

3. Use play, pause step, search and slow-motion to

ﬁnd the starting point.

[Language] – Selects a keyboard type.

4. Press ENTER (b) at the starting point of the

section you want to delete.

[Space] – Inserts a space at the cursor position.

[Delete] – Deletes the character to the left of

the cursor position.

[End Point] icon is highlighted.

The part is indicated on the Progress Bar.

5. Use play, pause step, search and slow-motion to

ﬁnd the ending point.

[a/d] – Moves the cursor left or right.

[OK] – Conﬁrms the name you have entered.

6. Press ENTER (b) at the ending point of the

section you want to delete.

[Cancel] – Deletes all characters and exits the

Keyboard menu.

You can cancel the selected point, use s/wto

select [Cancel] icon then press ENTER (b).

Note

7. If you ﬁnish to edit, select [Done] icon then

press ENTER (b).

Remote Control buttons for entering a

name

The conﬁrm message for deleting will appear.

Use a/dto select [OK] then press ENTER (b).

The selected part is deleted from the title and

Title List menu appears.

z(PLAY): Inserts a space at the cursor

position.

M(PAUSE/STEP): Deletes the character to

the right of the cursor position.

Note

SKIP (C/V): Moves the cursor left or

right.

It may not be possible to delete parts that

are less than 3 seconds long.

Z(STOP), CLEAR: Deletes the character to

the left of the cursor position.

If you select [Cancel] then press ENTER (b),

the Recorder will go to previous option and

into Pause mode.

0-9: Enters the character corresponding to

the selected column.

MENU/LIST, DISPLAY: Switches the

keyboard type.provider.

RC689D-P.BITALLU_MFL65225535_ENG.indd 55

11. 2. 1. �� 12:12

56 Operating

4. Choose [OK] then press ENTER (b) to ﬁx the

Moving a Playlist Chapter

-RW_VR

name and return to the previous menu screen.

5. Press RETURN (x) repeatedly to exit the menu.

Use this function to re-arrange the playing order of

Playlist chapters on the Chapter List-Playlist menu.

Note

Names can be up to 32 characters long.

Note

For discs formatted on a diﬀerent recorder,

you will see only a limited character set.

This function is not available if there is only

one chapter.

When recording on DVD-R, DVD-RW or

DVD+R discs, the entered name is displayed

on the u unit only after ﬁnalization.

1. Select a chapter on the Chapter List-Playlist

menu.

2. Press ENTER (b).

The menu options appears on the left side of

the menu.

Time Search

-RW_VR-RW_Video+RW

-R

3. Use s/wto select [Move] option from Playlist

options then press ENTER (b).

You can select start point of the title.

1. Choose Use a/d/ s/wto choose a title on

the Title List menu then press ENTER (b).

The options appears on the left side of the

menu.

2. Choose Select [Search] > [Time] option then

press ENTER (b).

[Time] menu appears on the TV screen.

4. Use a/d/ s/wto choose the place you

want to move the chapter then press ENTER

(b).

After pressing ENTER (b), the updated menu is

displayed.

Hide a Chapter/Title

Start time

+RW

-R

Selected point

Selected time

Current picture

End time

You can skip playing chapters or titles without

deleting from the disc.

1. Use a/d/ s/wto choose a chapter or title

you want to hide on the [Title List] or [Chapter

List] menu, then press ENTER (b).

3. Choose Use a/dto ﬁnd the point you want

to start.

Options appear on the left side of the screen.

The point increase 1 minute step.

If you press and hold a/dthen the point

increase 5 minute step.

2. Select [Edit] > [Hide] option.

Example: Title List (DVD+RW)

4. Choose Press ENTER (b) to start selected point.

RC689D-P.BITALLU_MFL65225535_ENG.indd 56

11. 2. 1. �� 12:12

Operating 57

3. Press ENTER (b) to conﬁrm.

Divide One Title Into Two

+RW

The chapter’s or title’s thumbnail will dim.

Note

Use this command to split a title up into two new

titles.

If you select a hidden chapter or title on

the Title List or Chapter List menu, you can

‘show’it by choosing [Show] option on the

menu. After doing that, you are able to see

the chapter or title.

1. On the Title List menu, select a title you want to

divide then press ENTER (b).

The menu options appears on the left side of

the screen.

You can play hidden chapter or title using

[Full Play] option in the menu.

2. Select [Edit] > [Divide] option.

Example: Title List (DVD+RW)

Protect a Title

-RW_VR+RW

-R

Use this function to protect against accidental

recording, editing or deleting of the title.

1. Press MENU/LIST to display the [Title List] menu.

2. Use a/d/ s/wto choose a title you want to

protect then press ENTER (b).

3. Press ENTER (b).

[Edit (Divide)] menu appears.

Options appear on the left side of the screen.

3. Select [Protect] from the options.

Example: Title List (DVD-RW)

Current picture

The second title’s thumbnail

The ﬁrst title’s thumbnail

4. Press ENTER (b) to conﬁrm.

Note

4. Use play, pause step, search and slow-motion to

ﬁnd the point you want to divide the title.

If you select a title that has already been

protected on the Title List menu, you can

‘unprotect’it by choosing [Unprotect] option

from the Title List menu options. After doing

that, you can edit and delete the title.

5. Select [Divide] option then press ENTER (b) at

the point.

To reset the point, select [Cancel] option then

press ENTER (b). Repeat from step 4.

6. Choose [Done] option then press ENTER (b) to

ﬁx the dividing point.

The title is divided into two new titles. It take up

to 6 minutes to divide.

Note

The dividing point may not be selected if the

point is less than 3 seconds long.

RC689D-P.BITALLU_MFL65225535_ENG.indd 57

11. 2. 1. �� 12:12

58 Operating

Combining Two Chapters Into One

Overwriting Recording

-RW_VR+RW

+RW

Use this function to combine two adjacent chapters

into one.

To overwrite a new video recording on a previously

recorded title, follow these steps. This feature is not

available for DVD+Rs, that always record at the end

of the Disc.

1. On the Chapter List menu, select the second

chapter of the two chapters you want to

combine then press ENTER (b).

1. Select input source you want to record

(TV channel, AV1, AV2, DV).

The menu options appears on the left side of

the screen.

2. Press MENU/LIST to display the Title List menu.

2. Use s/wto select [Combine] option.

The combine indicator appears between the

two chapters you want to combine.

Example: Title List (DVD-VR)

3. Use s/w/a/dto choose a title you want to

overwrite.

4. Press X(REC) to start overwrite recording.

Overwrite recording starts from the start point

of the title.

3. Press ENTER (b) to combine the chapters.

4. Repeat steps 1 - 3 to continue to combine from

the menu.

5. Press Z(STOP) to stop the overwrite recording.

The new title is created and updated menu is

displayed.

5. Press x(RETURN) repeatedly to exit the menu.

Note

This function cannot operate listed as below;

This function is not available for a protected

title.

If there is only one chapter within the title.

If you select ﬁrst chapter.

If you overwrite the longer recording than

the current title on the fully recorded disc,

the next title is overwritten.

If two chapters created by erasing a part

from an original title.

If next title is protected, the overwriting

stops at the starting point of the title.

If two chapters created from diﬀerent titles.

If two chapters created by moving an order

from an original title.

RC689D-P.BITALLU_MFL65225535_ENG.indd 58

11. 2. 1. �� 12:12

Operating 59

Note

Viewing Title List menu displayed on ,

Unﬁnalized DVD+RW is playable on regular

units.

other DVD Recorders or Players

+RW

The edited contents of a DVD+R (DL) disc

are compatible on regular DVD players only

after ﬁnalization.

You can view the Title List menu displayed on

the other DVD player that is capable of playing

DVD+RW or DVD+R discs.

Any edited contents of the DVD+R (DL) disc

are not compatible on regular units.

(Hide, chapter combine, added chapter

mark, etc.)

1. Insert DVD+R or DVD+RW disc recorded already.

2. On DVD mode, press TITLE in Play mode or Stop

mode.

How long ﬁnalization takes depends on the

type of disc, how much is recorded on the

disc, and the number of titles on the disc.

Title List menu will appear as shown below.

DVD+R (DL) disc can take up to 30 minutes

to ﬁnalize.

3. To play back a title, select the title you want

then press ENTER (b) or z(PLAY).

Note

You can remove the Title List menu by pressing

Z(STOP).

Playing Your Recordings on Other

DVD Players (Finalizing a Disc)

Most regular DVD players can play ﬁnalized discs

recorded in Video mode, ﬁnalized DVD+R or

DVD+RWs. A small number of players can also play

DVD-RW discs recorded in VR mode, ﬁnalized or

not. Check the manual that came with the other

player to check what formats of discs it will play.

Finalizing‘ﬁxes’the recordings and editings in place

so that the disc can be played on a regular DVD

player or computer equipped with a suitable DVD-

ROM drive.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. The menu can be accessed

by pressing MENU/LIST or TITLE. To ﬁnalize a disc,

refer to [Finalize] on page 32.

RC689D-P.BITALLU_MFL65225535_ENG.indd 59

11. 2. 1. �� 12:12

60 Operating

Recording from DV Input

Dubbing

Before DV dubbing

You can connect a DV-equipped camcorder to

this recorder using a single DV cable for input and

output of audio, video, data and control signals.

Dubbing from VCR to DVD

You can copy the contents of a Video tape to a

DVD using the DUBBING button. This allows you to

archive your old Video tapes to DVD.

This recorder is only compatible with DV-format

(DVC-SD, DV25) camcorders. Digital satellite

tuners and Digital VIDEO video recorders are not

compatible.

1. Insert a blank DVD disc in the DVD deck and

close the disc tray.

2. Insert the video tape you wish to copy into the

VCR deck.

You cannot connect more than one DV

camcorder at a time to this recorder.

3. Select VCR mode by pressing VCR on the

remote control or pressing DVD/VCR on the

front panel.

You cannot control this recorder from external

equipment connected via the DV IN jack

(including two recorders).

4. Find the place on the Video tape from which

you want to start dubbing using the PLAY, FF,

REW and PAUSE functions. For best results,

pause playback at the point from which you

want to record.

It may not always be possible to control the

connected camcorder via the DV IN jack.

Digital camcorders can usually record audio

as stereo 16-bit/48kHz, or twin stereo tracks of

12-bit/32kHz. This recorder can only record one

stereo audio track. Set [DV Record Audio] option

to Audio 1 or Audio 2 as required (see page 31).

5. Press the DUBBING button.

The Dubbing popup appears.

Audio input to the DV IN jack should be 32 or

48kHz (not 44.1kHz).

Picture disturbance on the recording may occur

if the source component pauses playback or

plays an unrecorded section of tape, or if the

power fails in the source component, or the DV

cable becomes disconnected.

6. Use a/dto select [YES] then press ENTER (b)

7. To stop dubbing at any other time, press Z

(STOP).

Dubbing will stop automatically when the Video

tape ends.

Note

If you press PAUSE during Dubbing mode,

both the DVD and VCR decks go into Pause

mode and the DUBBING button blinks on the

front panel. While in Pause mode, you can

adjust the VCR playback

position using PLAY, REW, FF, PAUSE/STEP, etc.

The DVD deck will remain in Pause mode.

To resume Dubbing.

RC689D-P.BITALLU_MFL65225535_ENG.indd 60

11. 2. 1. �� 12:12

Operating 61

DV-Related Messages

You may see the following messages appear on

your TV screen when using the DV IN jack.

Recording from a Digital

Camcorder

You can record from a digital camcorder connected

to the DV IN jack on the front panel of this recorder.

Using the recorder’s remote, you can control both

the camcorder and this recorder.

Not connected to Camcorder.

The camcorder is not connected properly, or the

camcorder is switched oﬀ.

Too many devices connected.

The DV jack on this recorder supports connection

to just one camcorder.

Before recording, make sure that the audio input for

the DV IN jack is set up (see page 31).

Note

Check the tape.

The source signal must be DVC-SD format.

There is no cassette loaded into the connected

equipment.

Some camcorders cannot be controlled

using thisrecorder’s remote.

Uncontrollable device.

This recorder cannot control the camcorder.

If you connect a second DVD Recorder

using a DV cable, you cannot control the

second DVD Recorderfrom this one.

Updating the information.

Camcorder is updating the information for DV.

You can’t control this unit remotely from a

component connected to the DV IN jack.

Camera mode.

Camcorder is set to camera mode.

You can’t record date and time information

from a DV cassette.

1. Make sure your digital camcorder is connected

to the front panel DV IN jack. See page 19.

2. Check that the DV audio input is as you require.

You can choose between Audio 1 (original

audio) and Audio 2 (overdubbed audio).

DV Input is set from the DV Record Audio in sub-

menu of the Setup menu. See DV Record Audio

on page 31 for more information.

3. Press AV/INPUT repeatedly to select the DV

input. DV appears in the display window.

4. Find the place on the camcorder tape that you

want to the recording to start from.

For best results, pause playback at the point

from which you want to record.

Depending on your camcorder, you can use

this recorder’s remote to control the camcorder

using the STOP, PLAY and PAUSE functions.

5. Press X(REC) once to start recording.

Recording is automatically stopped if the

recorder detects no signal.

You can pause or stop the recording by pressing

M(PAUSE/STEP) or Z(STOP).

You cannot control the camcorder from this

remote control during recording.

In Video mode, the ﬁnal frame of the recording

may remain displayed on screen for a while after

recording stops.

RC689D-P.BITALLU_MFL65225535_ENG.indd 61

11. 2. 1. �� 12:12

62 Troubleshooting

Troubleshooting

General

Symptom

Cause & Solution

The Power does not turned on.

Plug the power cord into the wall outlet securely.

The unit does not start

playback.

Insert a playable disc. (Check the disc type, color system, and regional

code.)

Place the disc with the playback side down.

Place the disc on the disc tray correctly inside the guide.

Clean the disc.

Cancel the Rating function or change the rating level.

The angle cannot be changed.

Multi-angles are not recorded on the DVD Video being played.

The angle cannot be changed for the titles recorded on this unit.

Cannot play movie, photo or

audio ﬁles.

The ﬁles are not recorded in a format that the unit can play.

The unit does not support the codec of the movie ﬁle.

The channel is not found or

stored.

Check your antenna connection.

The remote control does not

work properly.

The remote control is not pointed at the remote sensor of the unit.

The remote control is too far from the unit.

There is an obstacle in the path between the remote control and the

unit.

The batteries in the remote control are exhausted.

The remote’s manufacturer code returned to the default setting when

you replaced the batteries. Reset the code (page 65).

Resetting the unit

Symptom

Cause & Solution

If you observe any of the

following symptoms.

The unit is plugged in, but the power will not turn on or oﬀ.

The front panel display is not working.

The unit is not operating normally.

You can reset the unit as

follows.

Press and hold the POWER (1) button for at least ﬁve seconds. This

will force the unit to power oﬀ then turn the unit back on.

Unplug the power cord, wait at least ﬁve seconds, and then plug it in

again.

RC689D-P.BITALLU_MFL65225535_ENG.indd 62

11. 2. 1. �� 12:12

Troubleshooting 63

Playback

Symptom

Cause & Solution

Cannot play a disc recorded

using this unit on other player.

Finalize the disc (see page 32).

Check the disc compatibility of the player.

Place the disc on the disc tray correctly inside the guide.

Discs recorded with copy-once material cannot be played on other

players.

The subtitle language cannot

be changed or turned oﬀ.

Subtitles are not recorded on the DVD Video being played.

The subtitle cannot be changed for the titles recorded on this unit.

Cannot play MP3/WMA/JPEG/

MPEG4 ﬁles.

The ﬁles are not recorded in a format that the unit can play.

The unit does not support the codec of the MPEG4 movie ﬁle.

The resolution is higher than the unit can support.

Recording

Symptom

Cause & Solution

Cannot record or does not

record successfully.

Check the remaining space on the disc.

If your source is copy-protected, you cannot record it using this unit.

Use a VR mode formatted disc for copy-once material. Video that is

‘copy-once only’can only be recorded using a DVD-RW disc in VR

mode disc with CPRM.

The power may have failed during recording.

In DVD mode, you cannot record the rated digital program, no

signal, audio only, scrambled program, etc. If the unit detects an

unrecordable signal as described above during recording, the

recording will be paused. The recording will be continued when

recordable signal is detected in pause mode. If the paused recording

is continued for an hour, the recording will be stopped automatically

with the message.

If you set a DTV rating for the unit and higher rated digital programs

are received, the program cannot be recorded. Change the DTV

rating level in order to record it.

Timer record does not record

successfully.

Clock is not set to correct time.

The start time of the timer recording is past.

Two timer recordings may have overlapped, in which case only the

earlier one will record completely.

When setting the recording programme, make sure you set the

recorder’s built-in tuner, not the TV’s built-in tuner.

If the inserted disc is damaged, the recording may not complete

successfully.

RC689D-P.BITALLU_MFL65225535_ENG.indd 63

11. 2. 1. �� 12:12

64 Troubleshooting

Stereo Audio Record and/

Playback is not present.

TV is not Stereo-compatible.

Broadcast programme is not in stereo format.

The A/V Output jacks on the unit are not connected to TV A/V In

jacks.

Even though the timer is set,

the recorder will not record

when.

There is no disc loaded.

A non-recordable disc is loaded.

Disc Protect is set to [ON] in the Disc menu (see page 33).

There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+RW,

DVD+R(DL)) recorded on the disc.

You cannot enter a timer

programme when.

A recording is already underway.

The time you’re trying to set has already passed.

There are already 16 timer programs set.

If two or more timer programs

overlap.

The earlier programme takes priority.

When the earlier program ﬁnishes, the later program starts.

If two programs are set to start at exactly the same time, the program

entered ﬁrst takes priority. If the disc is damaged, the recording may

not complete successfully. In this case even though the Check ﬁeld

shows [Rec. OK], it may not be

HDMI

Symptom

Cause & Solution

The connected HDMI device

does not display any picture.

Try disconnecting then reconnecting the HDMI cable.

Try switching the power of the HDMI device oﬀ then back on.

The video input of the connected device is set correctly for this unit.

The HDMI cable you are using is fully HDMI-compliant. Using a non-

standard cable may result in no picture being output.

Not all HDCP-compatible DVI devices will work with this unit.

The connected HDMI device

does not output sound.

Some HDMI-compatible devices do not output sounds

(check the manual that came with the connected device).

If your TV is not capable of handling 96 kHz sampling frequency, set

the [Sampling Freq.] option to [48 kHz] on the setup menu. When this

choice is made, this unit will automatically convert any 96 kHz signals

to 48 kHz so your system can decode them.

If your TV is not equipped with Dolby Digital and MPEG decoder, set

the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu.

If your TV is not equipped with DTS decoder, set the [DTS] options to

[OFF] on the setup menu.

To enjoy DTS multi channel surround, you must connect this unit to a

DTS compatible receiver via one of this unit’s digital audio outputs.

RC689D-P.BITALLU_MFL65225535_ENG.indd 64

11. 2. 1. �� 12:12

Appendix 65

Setting up the remote to

Controlling a TV with

the Supplied Remote

Control

control your TV

You can operate your TV with the supplied remote

control.

If your TV is listed in the table below, set the

appropriate manufacturer code.

You can control your TV using the buttons below.

1. While holding down 1(TV POWER) button,

and press the manufacturer code for your

TV with the numerical buttons (see the table

below).

Manufacturer

Code Number

1(Default), 2

Zenith

1, 3, 4

1, 2

6, 7

8, 9

GoldStar

Samsung

Sony

By pressing

You can

1(TV POWER)

Turn the TV on or oﬀ.

Hitachi

Switch the TV’s input source

between the TV and other

input sources.

2. Release the 1(TV POWER) button to complete

AV/INPUT

setting.

Depending on your TV, some or all buttons may not

function on the TV, even after entering the correct

manufacturer code. When you replace the batteries

of the remote, the code number you have set may

be reset to the default setting. Set the appropriate

code number again.

Scan up or down through

memorized channels.

PR/TRK (+/-)

VOL +/–

Adjust the volume of the TV

Note

Depending on the unit being connected, you

may not be able to control your TV using some

of the buttons.

RC689D-P.BITALLU_MFL65225535_ENG.indd 65

11. 2. 1. �� 12:12

66 Appendix

Area Code List

Choose an area code from this list.

Area

Code Area

AF Fiji

Code Area

FJ Monaco

Code Area

Code

Afghanistan

Argentina

Australia

Austria

MC Singapore

MN Slovak Republic

MA Slovenia

NP South Africa

NL South Korea

AN Spain

AR Finland

AU France

AT Germany

BE Great Britain

BT Greece

BO Greenland

BR Hong Kong

KH Hungary

CA India

FI Mongolia

FR Morocco

DE Nepal

Belgium

Bhutan

GB Netherlands

GR Antilles

GL New Zealand

HK Nigeria

HU Norway

IN Oman

Bolivia

NZ Sri Lanka

NG Sweden

NO Switzerland

OM Taiwan

Brazil

Cambodia

Canada

Chile

CL Indonesia

CN Israel

ID Pakistan

IL Panama

PK Thailand

PA Turkey

China

Colombia

Congo

CO Italy

IT Paraguay

JM Philippines

JP Poland

PY Uganda

CG Jamaica

CR Japan

PH Ukraine

Costa Rica

Croatia

PL United States

PT Uruguay

RO Uzbekistan

Vietnam

HR Kenya

KE Portugal

KW Romania

LY Russian

Czech Republic

Denmark

Ecuador

Egypt

CZ Kuwait

DK Libya

Federation

EC Luxembourg

EG Malaysia

SV Maldives

ET Mexico

Zimbabwe

Saudi Arabia

Senegal

El Salvador

Ethiopia

RC689D-P.BITALLU_MFL65225535_ENG.indd 66

11. 2. 1. �� 12:12

Appendix 67

Language code List

Use this list to input your desired language for the following initial settings: [Disc Audio],

[Disc Subtitle] and [Disc Menu].

Language

Afar

Code Language

6565 French

6570 Frisian

Code Language

7082 Lithuanian

7089 Macedonian

7176 Malagasy

7565 Malay

Code Language

Code

8368

8373

8375

8376

6983

8385

8387

8386

8476

8471

8465

8469

8472

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

7684 Sindhi

7775 Singhalese

7771 Slovak

7783 Slovenian

7776 Spanish

7773 Sudanese

7782 Swahili

7779 Swedish

7778 Tagalog

7865 Tajik

Afrikaans

Albanian

Ameharic

Arabic

8381 Galician

6577 Georgian

6582 German

7289 Greek

6869 Malayalam

6976 Maori

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

6583 Greenlandic

6588 Guarani

6590 Gujarati

6665 Hausa

7576 Marathi

7178 Moldavian

7185 Mongolian

7265 Nauru

Basque

6985 Hebrew

6678 Hindi

7387 Nepali

7869 Tamil

Bengali; Bangla

Bhutani

Bihari

7273 Norwegian

7285 Oriya

7879 Telugu

7982 Thai

6890 Hungarian

6672 Icelandic

6682 Indonesian

6671 Interlingua

7789 Irish

7383 Panjabi

8065 Tonga

8083 Turkish

7065 Turkmen

8076 Twi

Breton

7378 Pashto, Pushto

7365 Persian

Bulgarian

Burmese

Byelorussian

Chinese

Croatian

Czech

7165 Polish

6669 Italian

7384 Portuguese

7465 Quechua

8084 Ukrainian

8185 Urdu

9072 Japanese

7282 Kannada

6783 Kashmiri

6865 Kazakh

7876 Kirghiz

6978 Korean

6979 Kurdish

6984 Laothian

7079 Latin

7578 Rhaeto-Romance 8277 Uzbek

7583 Rumanian

7575 Russian

7589 Samoan

7579 Sanskrit

7585 Scots Gaelic

7679 Serbian

7665 Serbo-Croatian

7686 Shona

8279 Vietnamese

Danish

8285 Volapük

8377 Welsh

8365 Wolof

7168 Xhosa

8382 Yiddish

8372 Yoruba

8378 Zulu

Dutch

English

Esperanto

Estonian

Faroese

Fiji

7074 Latvian, Lettish

7073 Lingala

Finnish

7678

RC689D-P.BITALLU_MFL65225535_ENG.indd 67

11. 2. 1. �� 12:12

68 Appendix

Trademarks and

Licenses

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Deﬁnition

Multimedia Interface are trademarks or registered

trademarks of HDMI licensing LLC.

“DVD Logo”is a trademark of DVD Format/Logo

Licensing Corporation.

DivX®, DivX Certiﬁed® and associaated logos

are trademark of DivX, Inc., and are used under

license.

RC689D-P.BITALLU_MFL65225535_ENG.indd 68

11. 2. 1. �� 12:12

Appendix 69

Speciﬁcations

General

Power requirements

Power consumption

Dimensions (W x H x D)

Net Weight (Approx.)

Operating temperature

AC 200-240 V, 50/60 Hz

23 W

Approx. 430 x 78.5 x 260 mm (w x h x d)

4.2 kg

5 °C to 35 °C (41 °F to 95 °F)

Analog: PAL B/G, PAL I/I, SECAM D/K colour system

Digital: DVB-T Standard Compliant

Television system

Operating humidity

5 % to 90 %

Recording

Recording format

Recordable media

DVD Video Recording, DVD-VIDEO

DVD-RW, DVD-R, DVD+RW, DVD+R, DVD+R(Double Layer)

DVD (4.7GB): Approx. 1 hours (XP mode), 2 hours (SP mode), 4 hours

(LP mode), 6 hours (EP mode), 14 hours (MLP mode)

Recordable time

DVD+R DL (8.5GB): Approx. 3 hours (XP mode), 3.8 hours (SP mode),

7.3 hours (LP mode), 9.1 hours (EP mode), 21 hours (MLP mode)

Video recording format

Audio recording format

Sampling frequency: 27MHz, Compression format: MPEG2

Sampling frequency: 48kHz, Compression format: Dolby Digital

Input

ANTENNA IN

Digital and Analog, 75 ohms

VIDEO IN

AUDIO IN

DV IN

1.0 Vp-p 75 ohms, sync negative, RCA jack x 1 / SCART x 1

2.0 Vrms more than 47 kohms, RCA jack (L, R) x 1 / SCART x 1

4 pin (IEEE 1394 standard)

Outputs

(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

19 pin (HDMI standard, Type A)

COMPONENT VIDEO OUT

HDMI OUT (video/audio)

ANALOG AUDIO OUT

DIGITAL IN (OPTICAL)

2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1

3 V (p-p), Optical jack x 1

RC689D-P.BITALLU_MFL65225535_ENG.indd 69

11. 2. 1. �� 12:12

70 Appendix

System

Signal system

Standard PAL color TV system

20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)

More than 100 dB (ANALOG OUT connectors only)

Less than 0.008%

Frequency response

Signal-to-noise ratio

Harmonic distortion

Dynamic range

More than 95 dB

Bus Power Supply (USB)

DC 5 V 0500 mA

Design and speciﬁcations are subject to change without notice.

RC689D-P.BITALLU_MFL65225535_ENG.indd 70

11. 2. 1. �� 12:12

Appendix 71

Notes on Discs

Maintenance

Handling Discs

Do not touch the playback side of the disc. Hold

the disc by the edges so that ﬁngerprints do not

get on the surface. Never stick paper or tape on the

disc.

Handling the Unit

When shipping the unit

Please save the original shipping carton and

packing materials. If you need to ship the unit, for

maximum protection, re-pack the unit as it was

originally packed at the factory.

Storing Discs

After playing, store the disc in its case. Do not

expose the disc to direct sunlight or sources of heat

and never leave it in a parked car exposed to direct

sunlight.

Keeping the exterior surfaces clean

Do not use volatile liquids such as insecticide

spray near the unit.

Wiping with strong pressure may damage the

surface.

Cleaning Discs

Fingerprints and dust on the disc can cause poor

picture quality and sound distortion. Before playing,

clean the disc with a clean cloth. Wipe the disc from

the center to out.

Do not leave rubber or plastic products in

contact with the unit for a long period of time.

Cleaning the unit

Do not use strong solvents such as alcohol,

benzine, thinner, commercially available cleaners,

or anti-static spray intended for older vinyl records.

To clean the player, use a soft, dry cloth. If the

surfaces are extremely dirty, use a soft cloth lightly

moistened with a mild detergent solution. Do not

use strong solvents such as alcohol, benzine, or

thinner, as these might damage the surface of the

unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the

optical pick-up lens and disc drive parts are dirty

or worn, the picture quality could be diminished.

For details, please contact your nearest authorized

service center.

RC689D-P.BITALLU_MFL65225535_ENG.indd 71

11. 2. 1. �� 12:12

Printed in Indonesia

RC689D-P.BITALLU_MFL65225535_ENG.indd 72

11. 2. 1. �� 12:12

Jenn Air Cooktop JDRP430 User Manual
JVC HV Z29V1 User Manual
Kyocera 1155 User Manual
Matsui America DVDR100 User Manual
MicroBoards Technology Orbit 3 User Manual
NEC MultiSync V422 User Manual
Panasonic Computer Hardware AW HHD870N User Manual
Philips Brilliance 107P10 User Manual
Philips Computer Monitor 1 92E+04 User Manual
Philips FLAT PANEL 150S User Manual