JVC AV 21M535 AV 21M515 AV 21M315 AV 21V315 AV 25M515 AV 25M315 User Manual

COLOUR TELEVISION

EQUALIZER • CINEMA SURROUND • COMPONENT INPUT

Contents

Knowing your TV’s features ....................................................... 3

Remote control buttons and basic functions .............................. 4

TV buttons and functions ........................................................... 6

Setting up your TV ..................................................................... 7

Basic setting for picture.............................................................. 9

Advanced setting for picture .....................................................11

Basic setting for sound............................................................. 12

Advanced setting for sound ..................................................... 13

DVD function ............................................................................ 14

Customized setting .................................................................. 15

TV channel presetting .............................................................. 17

Additional preparation .............................................................. 20

Troubleshooting ....................................................................... 22

Specifications ........................................................................... 23

AV-21M535

AV-21M515

AV-21M315

AV-21V315

AV-25M515

AV-25M315

INSTRUCTIONS

GGT0070-001A-H

Knowing your TV’s features

Main features

DVD FUNCTION

Just connect DVD player to the television. The television will detect DVD signal and display

picture on the screen automatically and you can adjust pictures and sound while you are

watching DVD as your desire.

A2/NICAM

(STEREO / I II)

You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2

or NICAM Sound-multiplex system.

EXIT

FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.

AI ECO

TV detects the brightness of your room and automatically adjust the picture brightness to a

suitable level for a better eye care.

AI VOLUME

TV adjusts the volume automatically to the same level for all TV channels to avoid sudden

change of the volume when selecting different TV channel or selecting Video Mode.

VNR

You can reduce the picture noise when viewing noisy TV programmes or video sources.

WHITE BALANCE

You can choose one of three tones of white to match to the video source such as movie,

sport, etc. Changing White balance affects the appearance of all other colours on the

screen.

Confirm your TV’s functions

RM-C1286

Some functions written in this instruction manual may not be available for your TV.

Please see the chart below and check the functions that are equipped for your TV’s model number. The

model number is indicated at the rear of your TV. When you press a button concerned to a function that is

not available for your TV, it does not work and the logo “Ø” appears on the screen.

Model No.

NO.

Function

BASS

–

Remote control buttons and basic functions

No. Press

POWER

MENU/OK

Turn on or off the TV from standby mode.

Display menu and confirm selected function.

5 / ∞ / 2 / 3 Select and adjust menu function.

CHANNEL -/+ Select the desired channel number.

VOLUME -/+ Adjust the volume level.

TV/VIDEO

EXIT

Select TV or video terminal input.

On the other hand, you can use this button to EXIT from the menu.

Turn off the volume.

Press this button again to resume the volume.

Display the programme number or video terminal number, stereo/bilingual broadcast system

and PR list (channel list) on the screen.

MUTING

DISPLAY

/BACK

You can select the channel using the PR list.

1 Press the DISPLAY button once to display the PR list.

2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.

You can confirm the favorite channels in the PR list. The channels set to favorite channels are

indicated with coloured mark.

On the other hand, you can use this button to return to the previous menu.

Select the programme number. For two digits programme number, press -/--, then press the

number button.

RM-C1286

0~9, -/--

RETURN

a) Return to the frequently view channel with one touch.

1 Choose the channel you want to register.

2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.

To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.

b) Return to the previously viewed channel, if you have not set or have cancelled the Return

channel as above.

FAVORITE

CHANNEL

(colour buttons :

red, green,

1. Choose the TV channel you want to register then press and hold a colour button until

"FAVORITE CHANNEL I PROGRAMMED!" appears.

2. To register other favorite channels, repeat step 1.

yellow, blue)

To recall the favorite channel, press the colour button.

When the TV is in menu mode, the favorite channel function is not available.

Remote control buttons and basic functions (continued)

How to operate menus and menus locations

Top menu

MENU PICTURE

2nd menu

PICTURE MODE

PICTURE SETTING P.10

Location 3rd menu

P.9

Location

–

P.10

–

Operation

Note

CONTRAST

BRIGHT

SHARP

COLOUR

Display the MENU Press the MENU/OK button 2.

To exit the MENU,

press the DISPLAY/

BACK button 8 or

choose EXIT menu

or TV/VIDEO/EXIT

button 6.

TINT

WHITE BALANCE P.10

–

VNR

P.15

P.13

P.12

P.13

P.12

Display the top

Press 5/∞ buttons 3 to choose a Press ∞ button 3 to

menu title. Then press MENU/OK display the next page

SOUND

STEREO/I II

AI VOLUME

SOUND MODE

EQUALIZER

BALANCE

CINEMA SURROUND P.13

SUPER BASS

DVD MENU

button 2.

for more functions.

Display the 2nd

Press 5/∞ buttons 3 to choose a

menu title. Then press MENU/OK

button 2.

–

Display the 3rd

Press 5/∞ buttons 3 to choose a

menu title. Then press MENU/OK

button 2.

P.13

P.14

FEATURES

AUTO SIGNAL DETECT P.14

DVD PICTURE MODE P.14

Return to the

previous menu

Press the DISPLAY/BACK button

–

TINT COLOUR

WHITE BALANCE

SOUND MODE

P.14

Choose the setting Press 5/∞ buttons 3 to choose Press the TV/VIDEO/

of a function

a function. Then press the 2/3

EXIT button 6 to

buttons 3 to change the setting. exit from the menu.

CINEMA SURROUND P.14

Adjust the effect

level of a function

Press 5/∞ buttons 3 to choose

a function. Then press the 2/3

buttons 3 to adjust the effect

level.

OFF TIMER

CHILD LOCK

COMPRESS (16:9) P.11

P.15

–

AI ECO SENSOR

SETUP TOUR

AUTO PROGRAM P.17

EDIT/MANUAL P.17

P.11

P.16

–

P.17-

P.18

–

P.15

–

Display the sub

Press the 5/∞ buttons 3 to

menu of a function. choose a function. Then press

MENU/OK button 2 to display

the sub menu.

INSTALL

–

DELETE, MOVE,

MANUAL, INSERT

The following chart shows locations of functions in menus. In this manual,

location of a function is described as follows:

COLOUR SYSTEM P.9

LANGUAGE

VIDEO-2 SETTING P.16

BLUE BACK

–

P.15

LANGUAGE

2nd menu

Top menu

–

3rd menu

P.11

–

Note: Some functions have the 4th menus as the sub-menus.

EXIT

TV buttons and functions

The illustrations shown below is for AV-21M535 and AV-21V315 only, which are used for explanation purpose.

Your TV may not look exactly the same as illustrated.

No. Button/terminal Description

Page

L (main power)

POWER lamp

Press to turn on or turn off the TV’s main power.

Indicate the TV is being turned on or off.

No colour : TV’s main power is being turned off.

–

Front of the TV

AV-21M535

Red

: TV’s main power is being turned on.

Note: When you turn off the power switch while TV is in standby

mode, the light of power lamp will be off in 10 -15 seconds.

POWER

CHANNEL

VOLUME

ECO sensor

–

IN (VIDEO-3)

MONO

Remote control sensor

–

VOLUME -/+

CHANNEL -/+

Press to adjust the volume level.

Press to select the desired channel.

Press to display the menu.

–

AV-21V315

IN (VIDEO-3)

Video and audio input jacks for VIDEO-3 mode.

Headphone jack.

Aerial socket.

POWER

MONO

IN (VIDEO-3)

CHANNEL

VOLUME

OUTPUT

Video and audio output jacks. (The component video

signal cannot be output.)

Rear of the TV

COMPONENT

Video or component video, and audio input jacks for

(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting

AV-21M535

AV-21V315

the “VIDEO-2 SETTING” function (see page 16).

VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1

mode

COMPONENT

(VIDEO-2)

INPUT

COMPONENT

(VIDEO-2)

INPUT

VIDEO-1

OUTPUT

INPUT

BASS SPEAKER OUT Twin Port Bass Blaster Unit output terminal.

OVER

How to operate the menus with the TV button

BASS

SPEAKER

OUT

Work as same as the button on the

TV button

Note

MONO

remote control unit

MENU/OK button

To display main menu and exit

menu after finish setting.

CHANNEL -/+ ∞/5 button

To select menu function.

VOLUME -/+ 2/3 button

To adjust the desired function.

Setting up your TV

CAUTION

•

Turn off the equipment including the TV before connecting.

1 Connecting the aerial cable.

2 Connecting the compatible main plug to the AC outlet.

(1)

VHF/UHF outdoor aerial

Matching aerial

adapter (supplied)

(2)

(3)

75-ohm coaxial cable (not supplied)

3 Inserting batteries into the remote control.

Insert two batteries by following the + and -

polarities and inserting the - end first.

CAUTION:

If you connect a VCR, connect the aerial output jack of your VCR

and the aerial jack on the TV with aerial cable. Then connect the

output jacks of your VCR and the VIDEO-1 input jacks of the TV

with the video cable (or S-VIDEO cable if available) and audio

cables. For details, see the manual of your VCR.

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new

batteries. The supplied batteries are for testing, not

regular use.

Rear of TV

VHF/UHF outdoor aerial

AV-21V315

COMPONENT

(VIDEO-2)

INPUT

VIDEO-1

INPUT

OUTPUT

4 Turn on the TV by pressing the main power button.

OVER

JVC logo appears on the screen.

MONO

To video

output

To audio

output

To RF

output

To S-video

output

JVC logo will appear on the screen again at the phase of “SETUP

TOUR RESTART?” function. Then the initial setting can be

performed according to page 8.

VCR

To aerial input

The illustration shown is just a sample. It may not be same as your TV.

Setting up your TV (continued)

5 Making the initial settings

Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below:

AUTO PROGRAM

LANGUAGE

AUTO PROGRAM

EDIT

ENGLISH

CH/CC

¿“…“‰∑¬

CC 12

CH 04

CH 76

CH 78

CH 05

CH 28

CH 10

SETUP TOUR RESTART?

22%

MENU : OK

DISPLAY : BACK

TV/VIDEO : EXIT

MENU : OK

IINSERT

IDELETE

IMANUAL

: YES

MOVE

MENU : NO

• Press 5/∞ button to

select your desired

language.

• TV will start searching

for the channels.

• To complete the initial

setting, press the

MENU/OK button. To

edit the channel list, see

page 17.

• After that, when turn on the

TV at the next time. “SETUP

TOUR RESTART?” will be

displayed.

Press the MENU/OK button

to cancel the SETUP TOUR

RESTART function.

To stop AUTO

PROGRAM, press

MENU/OK button.

If you want to make initial

settings again when the next

time you turn on the TV,

press the Red button to

activate the SETUP TOUR

RESTART function.

Basic setting for picture

COLOUR SYSTEM

You can select the appropriate colour system when the picture is

not clear or no colour appears.

Press the COLOUR SYSTEM button to select a setting.

In TV mode:

For the colour system in each country or region, see the table below:

Area

Country or Region

System

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,

Yemen, etc.

PAL

Indonesia, Malaysia, Singapore, Thailand, India, etc.

Asia, Middle

East

China, Vietnam, etc.

Hong Kong, etc.

PAL

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM

<AV-21M315, AV-25M315, AV-21V315>

Philippines, Taiwan, Myanmar, etc.

Russia, etc.

Czech Republic, Poland, etc.

Germany, Holland, Belgium, etc.

UK, etc.

NTSC

SECAM

PAL

AUTO

PAL

SECAM

Europe

In VIDEO mode:

Oceania

Africa

Australia, New Zealand, etc.

Republic of South Africa, etc.

Nigeria, etc.

PAL

AUTO

PAL

SECAM

Egypt, Morocco, etc.

SECAM

NTSC4.43

NTSC3.58

PICTURE MODE

You can choose the desired picture setting with one-touch.

Press the PICTURE MODE button to select a setting.

AUTO

PAL

SECAM

SOFT

Softens contrast and sharpness.

BRIGHT

STANDARD

USER

Heightens contrast and sharpness.

Standard picture setting.

You can change this picture setting as you like.

Select USER and adjust following items in the

PICTURE SETTING menu. (CONTRAST, BRIGHT,

SHARP, COLOUR, TINT*)

NTSC4.43

NTSC3.58

To operate this function with a menu:

❇

INSTALL menu

COLOUR SYSTEM

When you select to VIDEO-2 Mode. You cannot adjust SHARP

and TINT.

*TINT can only be adjusted in NTSC system.

To operate this function with a menu:

❇

PICTURE menu

PICTURE MODE

To return the USER setting to the default, press the blue button

when the PICTURE SETTING menu appears.

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

Basic setting for picture (continued)

PICTURE SETTING

WHITE BALANCE

You can adjust the desired picture setting when selecting USER

in PICTURE MODE.

You can change the white balance of the picture to better match

the type of video being viewed.

Select the WHITE BALANCE in the PICTURE menu, then choose

the desired setting.

1 Select the USER in PICTURE MODE under PICTURE menu.

❇

PICTURE menu

USER

PICTURE MODE

❇

PICTURE menu

WHITE BALANCE

2 Select the PICTURE SETTING in PICTURE menu, then adjust

NORMAL

COOL

WARM

Normal white balance.

Bluish white.

Reddish white.

the setting.

❇

PICTURE menu

PICTURE SETTING

CONTRAST

BRIGHT

SHARP

COLOUR

TINT*

2 : Lower contrast

2 : Darker

2 : Softer

2 : Lighter

2 : Reddish

3 : Higher contrast

3 : Brighter

3 : Higher

3 : Deeper

3 : Greenish

When you select to VIDEO-2. You cannot adjust WHITE BALANCE.

You can adjust it in DVD Menu.

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

When you select to VIDEO-2 Mode. You cannot adjust SHARP

and TINT.

* TINT can only be adjusted in NTSC system.

Advanced setting for picture

AI ECO SENSOR (ECO)

BLUE BACK

You can adjust TV screen contrast according to the brightness of

your room.

Press the ECO button to select the desired mode.

You can set the TV to automatically change to a blue screen and

mute the sound if the signal is weak or absent, or when there is

no input from an antenna.

OFF

Cancel the function.

Select the BLUE BACK in the INSTALL menu, then choose ON or

OFF.

MODE-1

MODE-2

DISPLAY

Mild contrast (recommended).

Even contrast.

Display the graphic of the function.

❇

INSTALL menu

BLUE BACK

To operate this function with a menu:

If you wish to continue viewing the poor picture, cancel the BLUE

BACK function.

❇

FEATURES menu

AI ECO SENSOR

COMPRESS (16:9)

❇ About the basic operations of the menu, please see the “How

You can convert a normal picture (4:3 aspect ratio) into a wide

picture (16:9 aspect ratio).

to operate menus and menus locations” on page 5.

Select the COMPRESS (16:9) in the FEATURES menu, then

choose ON or OFF.

❇

FEATURES menu

COMPRESS (16:9)

Basic setting for sound

SOUND SYSTEM

SOUND MODE

You can select an appropriate sound system when abnormal

sound occurs even when the picture appears normally.

Press the SOUND SYSTEM button to select a setting.

You can choose the desired sound setting.

Select the SOUND MODE in SOUND menu, then choose the

setting.

❇

SOUND menu

SOUND MODE

B/G

I^*

D/K^*

M^*

USER

You can change this sound setting as you like.

Select USER and adjust the frequencies in EQUALIZER

(100, 300, 1K, 3K, 8K Hz).

* The sound system of I, D/K and M are not available for 315 series.

This function is not available in video mode.

For the sound system in each country or region, see the table

below:

For details, see “EQUALIZER” on page 13.

SOUND TURBO Emphasize on low and high frequency levels.

THEATER

MUSIC

NEWS

Emphasize on movie sound.

Emphasize on music effect.

Emphasize on vocal sound.

Area

Country or Region

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,

System

B/G

Yemen, etc.

When you select to VIDEO-2. You cannot adjust SOUND MODE

function. You can adjust it in DVD Menu.

Indonesia, Malaysia, Singapore, Thailand, India, etc.

Asia, Middle

East

China, Vietnam, etc.

Hong Kong, etc.

D/K

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G

BALANCE

Philippines, Taiwan, Myanmar, etc.

Russia, etc.

Czech Republic, Poland, etc.

Germany, Holland, Belgium, etc.

UK, etc.

D/K

B/G

You can adjust the volume balance between the left and right

speakers.

Select the BALANCE in SOUND menu, then adjust the setting.

Europe

Oceania

Africa

Australia, New Zealand, etc.

Republic of South Africa, etc.

Nigeria, etc.

B/G

❇

SOUND menu

BALANCE

❇About the basic operations of the menu, please see the “How to

Egypt, Morocco, etc.

operate menus and menus locations” on page 5.

Advanced setting for sound

CINEMA SURROUND

EQUALIZER

You can enjoy an enhanced sound for wider audience.

Press the CINEMA SURROUND button to select a setting.

You can adjust the sound level of each frequencies when selecting

USER mode in SOUND MODE.

OFF

Cancel the function.

Listen to sound with wider audience effect.

1 Select the USER in SOUND MODE under SOUND menu.

❇

SOUND menu

SOUND MODE

USER

This function is not available when the SOUND MODE is set to

SOUND TURBO.

To operate this function with a menu:

2 Select the EQUALIZER in SOUND menu.

❇

SOUND menu

EQUALIZER

❇

SOUND menu

The following display appears.

CINEMA SURROUND

When you select to VIDEO-2. You cannot adjust CINEMA

SURROUND function. You can adjust it in DVD Menu.

EQUALIZER

STEREO / I II (

)

You can enjoy the stereo and bilingual broadcasted programmes.

100 300

8K Hz

Press the

button to select the desired mode.

Select stereo sound.

Select monaural sound.

Select bilingual I (sub I).

Select bilingual II (sub II).

MENU : OK

DISPLAY : BACK

TV/VIDEO : EXIT

3 Select and adjust the desired frequencies.

4 Press the MENU/OK button to exit the menu.

Adjust high frequency will affect higher pitch sound and vice versa.

This function is not available in video mode.

To operate this function with a menu:

❇

SOUND menu

STEREO / I II

AI VOLUME

* Stereo sound ( ) and monaural sound ( ) are not available

for 315 series.

You can adjust the volume of all the channels and video inputs to

the same level automatically depends on the strength of signal of

the sources.

SUPER BASS (BASS)

You can enjoy powerful bass sound with the Twin Port Bass Blaster unit.

Press the BASS button to select ON or OFF.

To operate this function with a menu:

❇

Select the AI VOLUME in SOUND menu, then choose ON or OFF.

❇

SOUND menu

AI VOLUME

SOUND menu

SUPER BASS

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

For attaching the Twin Port Bass Blaster unit, please see in page 21.

DVD function

WHITE BALANCE

AUTO SIGNAL DETECT

You can change the white balance of the DVD picture.

Select the WHITE BALANCE in DVD MENU under FEATURES menu,

then choose the desired setting.

When the DVD input signal is detected. The input mode will be

changed to VIDEO-2 automatically.

For The DVD player, press the “POWER ON” button of the

machine so that the signal can be detected.

❇

FEATURES menu

DVD MENU

WHITE BALANCE

For the VCR, press the “POWER ON” button of the machine, and

then press the “PLAY” button, so that the signal can be detected

and display DVD menu.

For details, see “WHITE BALANCE” on page 10.

SOUND MODE

You can choose the desired sound setting for the DVD.

Select the SOUND MODE in DVD MENU under FEATURES menu,

then choose the desired setting.

Select the AUTO SIGNAL DETECT in DVD MENU under

FEATURES menu then choose ON or OFF (Factory setting is ON).

❇

FEATURES menu

DVD MENU

AUTO SIGNAL DETECT

❇

FEATURES menu

DVD MENU

SOUND MODE

DVD PICTURE MODE

You can enhance the picture quality of the DVD or VIDEO-2.

For details, see “SOUND MODE” on page 12.

Select the DVD PICTURE MODE in DVD MENU under FEATURES

menu, then choose the desired setting.

CINEMA SURROUND

You can enjoy an enhanced sound for the DVD.

Select the CINEMA SURROUND in DVD MENU under FEATURES

menu, then choose the desired setting.

❇

FEATURES menu

DVD MENU

DVD PICTURE MODE

❇

DVD MENU

FEATURES menu

OFF

Cancel the function.

CLEAR-1 Select when the disc is with lots of noise (To soften the picture).

CLEAR-2 Select when the disc is with less noise (To sharpen the picture).

CINEMA SURROUND

For details, see “CINEMA SURROUND” on page 13.

This function is not available when the SOUND MODE is set to

SOUND TURBO.

❇❇ When you use VIDEO-2 to display the DVD signal or Video

signal then WHITE BALANCE, VNR function in PICTURE

menu/SHARP, TINT function in PICTURE SETTING menu/

SOUND MODE, CINEMA SURROUND function in SOUND

menu cannot operate.

TINT COLOUR

You can adjust the picture colour tone of the DVD.

Select the TINT COLOUR in DVD MENU under FEATURES menu,

then adjust the level.

❇

FEATURES menu

DVD MENU

TINT COLOUR

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

Customized setting

OFF TIMER

VNR

You can set the TV to turn off automatically to standby mode after

a set time.

Press the OFF TIMER button to select a desired period of time.

You can reduce the picture noise.

Select the VNR in the PICTURE menu, then choose a setting of

VNR function.

OFF TIMER

❇

PICTURE menu

VNR

120

You can set the period of time

to a maximum of 120 minutes

in 10 minutes step.

OFF

VNR is turned off.

AUTO

MIN

MAX

Effect of VNR is automatically controlled.

Effect of VNR becomes minimum level.

Effect of VNR becomes maximum level.

MENU : OK

DISPLAY : BACK

TV/VIDEO : EXIT

If you select MAX, the picture becomes softer even if the original

picture is sharp.

To operate this function with a menu:

When you select to VIDEO-2. You cannot adjust VNR function.

❇

FEATURES menu

OFF TIMER

When the elapsed of time left one minute, “GOOD NIGHT!”

appears on the screen.

You can display the OFF TIMER menu again to confirm or

change the remaining time.

LANGUAGE

You can choose your desired on screen display language.

Select the LANGUAGE in the INSTALL menu, then choose a

language.

❇ About the basic operations of the menu, please see the “How

❇

INSTALL menu

LANGUAGE

to operate menus and menus locations” on page 5.

CHILD LOCK

You can disable the front control buttons of the TV.

Select the CHILD LOCK in the FEATURES menu, then choose

ON or OFF.

❇

FEATURES menu

CHILD LOCK

Customized setting (continued)

DISPLAY

VIDEO-2 SETTING

You can display the programme number, video terminal number

and PR list on the screen.

Press the DISPLAY button to select the desired mode:

You can set the VIDEO-2 SETTING according to the video signal

output from the external devices connected to the VIDEO-2

terminal.

Select the VIDEO-2 SETTING in INSTALL menu, then choose a

setting (Factory setting is COMPONENT).

OFF

PR LIST

Choose a TV channel or a VIDEO terminal.

❇

INSTALL menu

VIDEO-2 SETTING

1 Press the DISPLAY button to display the PR LIST.

2 Select a programme number or video terminal by pressing the

5/∞ button to move up/down on the programme number or

press the 2/3 button to skip for each 7 programme numbers,

then press MENU/OK button.

VIDEO

If a normal video signal (composite video signal) is input.

COMPONENT If a component video signal (Y/C /C ) is input.

You must choose a setting follow as signal that you input to VIDEO-2.

(If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must

choose VIDEO-2 SETTING to VIDEO.)

PR LIST

CH/CC

For connecting methods, see “Additional Preparation” on page 20.

CH 09

CC 76

CC 78

SETUP TOUR

You may use the SETUPTOUR function to perform the initial setting.

When selecting SETUP TOUR, the LANGUAGE menu, AUTO

PROGRAM menu and EDIT menu will be displayed as shown on

page 8. But “SETUP TOUR RESTART?” will not be displayed.

MENU : OK

-7

❇ About the basic operations of the menu, please see the “How

Select SETUP TOUR in the INSTALL menu.

to operate menus and menus locations” on page 5.

❇

INSTALL menu

SETUP TOUR

TV channel presetting

2 Choose EDIT/MANUAL, then press the MENU/OK button.

To register the TV channels automatically

(AUTO PROGRAM)

EDIT menu appears.

EDIT

You can register the TV channels into the TV’s channel list

automatically.

CH/CC

CH 04

CH 76

CH 78

CH 05

CH 28

CH 10

1 Display the INSTALL menu.

❇

INSTALL menu

2 Choose AUTO PROGRAM, then press the MENU/OK button.

AUTO PROGRAM function starts, and the channels received

are registered in the channel list (PR LIST) automatically.

MENU : OK

IINSERT

IDELETE

IMANUAL

MOVE

3 Choose the channel which you want to register.

3 The EDIT menu appears.

4 Press the blue button to activate the MANUAL function.

The sound system of the channel appears at the right of the

CH/CC number.

5 Press the 3 button to choose an appropriate sound system.

For details, see “SOUND SYSTEM” on page 12.

To edit the channel

list

If a channel is not

registered

To exit the menu

Proceed to the Step 3 of “To edit the channel

list (PR LIST)” on page 18.

Proceed to the Step 3 of “To register the TV

channels manually” on this page.

Press the MENU/OK button.

6 Press the green or red button to search for the TV channel.

Searching stops when a channel is found and displayed.

7 Repeat step 5 until your desired TV channel appears.

To register the TV channels manually

(MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.

If the reception is poor Press the blue or yellow button to fine tune

1 Display the INSTALL menu.

the TV channel.

If noisy sound is heard Press the 3 button to choose an appropriate

sound system.

❇

INSTALL menu

8 Press the MENU/OK button to exit the menu.

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

TV channel presetting (continued)

To edit the channel list (PR LIST)

(MOVE and DELETE in the EDIT menu)

To add in the new channel

(INSERT in the EDIT menu)

You can edit the TV channel list as you like.

Note: After this operation, other channel’s PR numbers will be

changed.

You can add in the new channel in the TV channel list as you like.

You need to find the “CH/CC” number for the TV channel. Find the

“CH/CC” number corresponding to the channel number of the TV

channel from the attached sheet “CH/CC number list” on page 19.

1 Display the INSTALL menu.

❇

1 Display the INSTALL menu.

INSTALL menu

❇

INSTALL menu

2 Choose EDIT/MANUAL, then press the MENU/OK button.

EDIT menu appears.

EDIT

3 Choose the PR number for which you will register a new TV

channel. When you add a new TV channel of NTSC-M system,

press the SOUND SYSTEM button to change the sound

system to M. Then proceed to the next step.

CH/CC

CH 04

CH 76

CH 78

CH 05

CH 28

CH 10

4 Press the green button, then press 3 buttons to choose “CC”

MENU : OK

IINSERT

IDELETE

IMANUAL

MOVE

or “CH”.

5 Press the number button to enter the remaining CH/CC

number.

3 Choose the channel which you want to change PR number, or

delete.

The TV starts to search the TV channel, and the picture of the

TV channel appears. If the TV finds no TV channel, a noisy

picture appears.

4 Do the following action:

To change the PR

number (MOVE)

Press the 3 button. Then move it to the PR

number you want to use it for the channel.

Finally press the 2 button.

When a TV channel has already been registered in PR99, using

the INSERT function deletes that TV channel.

To delete the

Press the yellow button.

channel (DELETE)

❇ About the basic operations of the menu, please see the “How

to operate menus and menus locations” on page 5.

5 Press the MENU/OK button to exit the menu.

TV channel presetting (continued)

CCIR

E33

E34

E35

E36

E37

E38

E39

E40

E41

E42

E43

E44

E45

E46

E47

E48

E49

E50

E51

E52

E53

E54

E55

E56

E57

E58

E59

E60

E61

E62

E63

E64

E65

E66

E67

E68

E69

OIRT

AUSTRALIA

AU-34

AU-35

AU-36

AU-37

AU-38

AU-39/AU-40

AU-41

AU-42

AU-43

AU-44

AU-45

AU-46

AU-47/AU-48

AU-49

AU-50

AU-51

AU-52

AU-53

AU-54

AU-55/AU-56

AU-57

AU-58

AU-59

AU-60

AU-61

AU-62

AU-63/AU-64

AU-65

CCIR

S-18

S-19

S-20

S-21

S-22

S-23

S-24

S-25

S-26

S-27

S-28

S-29

S-30

S-31

S-32

S-33

S-34

S-35

S-36

S-37

S-38

S-39

S-40

S-41

OIRT

AUSTRALIA

CH/CC number

CH 33

CH 34

CH 35

CH 36

CH 37

CH 38

CH 39

CH 40

CH 41

CH 42

CH 43

CH 44

CH 45

CH 46

CH 47

CH 48

CH 49

CH 50

CH 51

CH 52

CH 53

CH 54

CH 55

CH 56

CH 57

CH 58

CH 59

CH 60

CH 61

CH 62

CH 63

CH 64

CH 65

CH 66

CH 67

CH 68

CH 69

US-33, W+48

US-34, W+49

US-35, W+50

US-36, W+51

US-37, W+52

US-38, W+53

US-39, W+54

US-40, W+55

US-41, W+56

US-42, W+57

US-43, W+58

US-44, W+59

US-45, W+60

US-46, W+61

US-47, W+62

US-48, W+63

US-49, W+64

US-50, W+65

US-51, W+66

US-52, W+67

US-53, W+68

US-54, W+69

US-55, W+70

US-56, W+71

US-57, W+72

US-58, W+73

US-59, W+74

US-60, W+75

US-61, W+76

US-62, W+77

US-63, W+78

US-64, W+79

US-65, W+80

US-66, W+81

US-67, W+82

US-68, W+83

US-69, W+84

CC 18

CC 19

CC 20

CC 21

CC 22

CC 23

CC 24

CC 25

CC 26

CC 27

CC 28

CC 29

CC 30

CC 31

CC 32

CC 33

CC 34

CC 35

CC 36

CC 37

CC 38

CC 39

CC 40

CC 41

CC 42

CC 43

CC 44

CC 45

CC 46

CC 47

CC 48

CC 49

CC 50

CC 51

CC 52

CC 53

CC 54

CC 55

CC 56

CC 57

CC 58

CC 59

CC 60

CC 61

CC 62

CC 63

CC 64

CC 75

CC 76

CC 77

CC 78

CC 79

CC 95

CC 96

CC 97

CC 98

CC 99

When you want to use the INSERT

function on page 18, find the CH/CC

number corresponding to the channel

number of the TV channel from this table.

Channel No. Country

CCIR

United States, Philippines, etc..

Middle East, Southeast Asia,

etc..

OIRT

Eastern Europe, Russia,

Vietnam, etc..

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

W+10

W+11

W+12

W+13

W+14

W+15

W+16

W+17

W+18

W+19

W+20

W+21

W+22

W+23

W+24

W+25

W+26

W+27

W+28

AUSTRALIA

Channel

Australia, etc..

CCIR

OIRT

AUSTRALIA

AU-0

AU-1

AU-2

AU-6

AU-7

AU-8

AU-9

CH 02

CH 03

CH 04

CH 05

CH 06

CH 07

CH 08

CH 09

CH 10

CH 11

CH 12

CH 13

CH 14

CH 15

CH 16

CH 17

CH 18

CH 19

CH 20

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

CH 30

CH 31

CH 32

US-2

US-3

US-4

US-5

US-6

US-7

US-8

US-9

US-10

E10

E11

E12

AU-66

AU-67

AU-68

AU-69

R10

R11

R12

AU-10

AU-11

US-11

US-12

US-13

US-14, W+29

US-15, W+30

US-16, W+31

US-17, W+32

US-18, W+33

US-19, W+34

US-20, W+35

US-21, W+36

US-22, W+37

US-23, W+38

US-24, W+39

US-25, W+40

US-26, W+41

US-27, W+42

US-28, W+43

US-29, W+44

US-30, W+45

US-31, W+46

US-32, W+47

CCIR

S-1

S-2

S-3

S-4

S-5

S-6

S-7

S-8

OIRT

AUSTRALIA

AU-5

CC 01

CC 02

CC 03

CC 04

CC 05

CC 06

CC 07

CC 08

CC 09

CC 10

CC 11

CC 12

CC 13

CC 14

CC 15

CC 16

CC 17

E21

E22

E23

E24

E25

E26

E27

E28

E29

E30

E31

E32

AU-5A

Z+1

Z+2

S-9

S-10

S-11

S-12

S-13

S-14

S-15

S-16

S-17

AU-3

AU-4

AU-28

AU-29

AU-30

AU-31/AU-32

AU-33

A-5

A-4

A-3

A-2

A-1

Additional preparation

The illustrations shown in this section are for AV-21M535 and

AV-21V315 only, which are used for explanation purpose. Your TV

may not look exactly the same as illustrated.

Connecting to rear component/video input

terminal and output terminal

Rear of TV

AV-21V315

Before connecting

VCR (for playing)

DVD player (composite signals)

COMPONENT

(VIDEO-2)

INPUT

•

Read the manuals provided with the devices for the proper

VIDEO-1

OUTPUT

INPUT

connection.

•

Turn off all the devices including the TV.

Note that connecting cables are not supplied.

VCR (for recording)

OVER

MONO

Connecting to front video input terminal

DVD player

(component video signals)

Front of TV

AV-21M535

When you use VIDEO-1 INPUT, you should choose to connect

S-VIDEO or video input. If S-VIDEO connector and video input

are connected at the same time, no picture displays on the

screen and the message “PLEASE DISCONNECT VIDEO-1

CABLE!” appears. In this case, you should disconnect either

S-VIDEO or video input.

Camcorder or TV game

L /

IN (VIDEO-3)

MONO

Headphones

AV-21V315

When connecting to COMPONENT (VIDEO-2) input, depending

on the connection, choose the appropriate video input using the

menu (see page 16).

IN (VIDEO-3)

MONO

Additional preparation (continued)

2 Firmly insert the Twin Port Bass Blaster Unit connector into the

Attaching the Twin Port Bass Blaster Unit

BASS SPEAKER OUT terminal.

<AV-21M535 only>

The Twin Port Bass Blaster Unit is packaged together with the

TV. Before you use the TV, mount the Twin Port Bass Blaster unit

correctly on the TV.

COMPONENT

VIDEO-1

(

)

VIDEO-2

INPUT

OUTPUT

INPUT

•

The SUPER BASS (BASS) function do not work unless the

Twin Port Bass Blaster Unit is connected correctly to the TV.

For details on the SUPER BASS (BASS) function, see page

13.

OVER

^/V

1 Place the unit on top of the TV making sure that the mounting

pin on the bottom of the unit fits into the mounting hole on the

top of the TV.

BASS

SPEAKER

OUT

^/MONO

•

When you mount the unit, make sure that the mounting pin

fits properly into the mounting hole. Otherwise, it may slide

off the top of the TV. This may cause damage or cause

unexpected injury.

CAUTION:

The Twin Port Bass Blaster Unit is just placed on top of the TV

and is not held in place by a screw. When using the unit, pay

attention to the following cautions. Otherwise, the unit or TV may

fall over and be damaged, or cause unexpected injury.

Twin Port

Bass Blaster

Unit

•

Do not rest your hands or elbows on the Twin Port Bass

Blaster Unit.

•

Do not move the TV with the Twin Port Blaster Unit mounted

on top of the TV. Before you move the TV, be sure to remove

the unit.

•

Do not move the TV by holding the Twin Port Bass Blaster

Unit.

Troubleshooting

If a problem occurs when you are using the TV, check the below

troubleshooting guide before calling for repair.

• Colour patches appear • This may due to the magnetized device such as a

at the corner of the

screen

speaker near to your TV. Keep the device apart from

your TV. Alternately, you can also use the magnetic-

shielded speaker.

• No picture,

no sound

• Deactivate the BLUE BACK function if it is turned on.

• Choose the appropriate sound system. Refer to

“SOUND SYSTEM” on page 12.

• Image takes a short

period to be displayed

• Image required time to stabilize before display. This

is not a malfunction.

• Snowy picture

• Check the aerial cable and its connection with the TV.

• Stripes appear on the • Interference occurs caused by other devices such as

• TV may emitted

crackling sound

•

This is due to a sudden change in temperature and it is

not a malfunction. If the crackling sound is too frequent,

request your service technician for inspection.

picture

an amplifier, personal computer, or a hair drier. Move

such devices away from your TV.

• Double-pictures

(ghosting) occur

• Interference occurs caused by signal reflecting from

mountains or building. Try to adjust the aerial’s

direction or use a better directionality antenna.

• Feel a slight electric

shock when touching

the TV screen

• This is due to the static electricity of the picture tube

and it will not harm the human body. This is not a

malfunction.

• Poor picture

• Choose the appropriate colour system. Refer to

“COLOUR SYSTEM” on page 9.

• Adjust the COLOUR or BRIGHT setting. Refer to

“PICTURE SETTING” on page 10.

• After you connect the • Please check that the AUTO SIGNAL DETECT

signal to VIDEO-2 and function is on or off.

playback VCR or DVD • Press button (VCR or DVD Player) to turn the

Player, the Auto Detect machine off and turn it on again; do not turn the

does not work.

machine off and on suddenly.

• Inspect the video cable connection on VIDEO-2 that

they are connected properly.

• White and bright still • Inevitable phenomenon due to the nature of the

image look as if it

were coloured

picture tube. This is not a malfunction.

•

When you are watching • Inspect the video cable connection on VIDEO-2 that

another channel that is they are connected properly.

• Top of the image from • This is due to the condition of the video signal

software products or whereby the image was not recorded properly. This

video tape is distorted is not a malfunction.

not VIDEO-2, AUTO

SIGNAL DETECT

works while VCR or

DVD Player was on.

• In a certain VCR or DVD Player, the function might

operate by the discontinuity of the signal.

• Poor sound

• Adjust the sound frequency properly. Refer to

“EQUALIZER” on page 13.

• Stereo or bilingual

sound is unclear

• TV channel reception is poor. Change the stereo/

bilingual mode to mono sound (see page 13).

While you are watching • In a certain VCR or DVD Player, the function might

TV on the other

operate by the discontinuity of the signal.

• Cannot operate the • The batteries may be exhausted. Replace with new

channels, AUTO SIGNAL

DETECT works when

remote control

batteries (see page 7).

• Ensure that you are operating the remote less than

seven meters from the front of your TV.

you press

on the front panel of

VCR or DVD Player.

• Cannot operate the • Press TV/VIDEO button to return to TV mode and try

menus

operating the menus.

•

After TV was on, AUTO

SIGNAL DETECT

works.

• Video signal from VCR or DVD Player cause the

function runs properly to indicate that there are video

signal on VIDEO-2 channel.

• Cannot operate the

front control buttons

• Deactivate the CHILD LOCK function if it is turned on

(see page 15).

Specifications

Model

AV-21M315

AV-21V315

AV-25M315

TV RF system

Colour system (RF mode)

B, G

PAL, SECAM

(VIDEO mode)

PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz

Channel and Frequencies

VHF low channel (VL) : 46.25 to 140.25 MHz

VHF high channel (VH) : 147.25 to 423.25 MHz

UHF channel (U) : 431.25 to 863.25 MHz

*Receives cable channel in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)

Power input

AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)

Power consumption

MAX: 112 W

AVG: 80 W

MAX: 112 W

AVG: 80 W

MAX: 132 W

AVG: 92 W

Screen size

(Measured diagonally)

Picture tube: 546.9 mm

Visible area: 508 mm

Picture tube: 546.9 mm

Visible area: 508 mm

Picture tube: 649 mm

Visible area: 600 mm

Audio output

(Rated power output)

7 W + 7 W

Speaker

(6.5 x 13) cm X 2

External input/output

VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input

VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/C^B/C^R) input

VIDEO-3: VIDEO input, AUDIO L/R input

OUTPUT: VIDEO output, AUDIO L/R output

Headphone jack: Stereo mini jack (3.5 mm diameter)

Dimension (W x H x D)

Weight

649 X 465.3 X 469.2 mm

24 kg

649 X 465.5 X 473.5 mm

24 kg

728 X 536 X 476.5 mm

32 kg

Accessories

• Remote control unit: RM-C1286 X 1

• AA/R6/UM-3 dry cell battery X 2

• Matching aerial adapter X 1

Design and specifications subject to change without notice.

Specifications

Model

AV-21M515

AV-25M515

AV-21M535

TV RF system

B, G, I, D, K, M

Colour system (RF mode)

(VIDEO mode)

PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz

Channel and Frequencies

VHF low channel (VL) : 46.25 to 140.25 MHz

VHF high channel (VH) : 147.25 to 423.25 MHz

UHF channel (U) : 431.25 to 863.25 MHz

*Receives cable channel in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)

Power input

AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)

Power consumption

MAX: 112 W

AVG: 80 W

MAX: 132 W

AVG: 92 W

MAX: 134 W

AVG: 90 W

Screen size

(Measured diagonally)

Picture tube: 546.9 mm

Visible area: 508 mm

Picture tube: 649 mm

Visible area: 600 mm

Picture tube: 546.9 mm

Visible area: 508 mm

Audio output

(Rated power output)

7 W + 7 W

7 W + 7 W + 13W

Speaker

(6.5 x 13) cm X 2

(Ø 13) cm X 1

(6.5 x 13) cm X 2

VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input

External input/output

VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/C^B/C^R) input

VIDEO-3: VIDEO input, AUDIO L/R input

OUTPUT: VIDEO output, AUDIO L/R output

Headphone jack: Stereo mini jack (3.5 mm diameter)

Dimension (W x H x D)

Weight

649 X 465.3 X 469.2 mm

24 kg

728 X 536 X 476.5 mm

32 kg

649 X 478 X 469.2 mm

26.4 kg

Accessories

• Remote control unit: RM-C1286 X 1

• AA/R6/UM-3 dry cell battery X 2

• Matching aerial adapter X 1

Design and specifications subject to change without notice.

0705-FLE-JMT