QCP 820, QCP 1920
and QCP 2700 PHONE
USER GUIDE
Important Information
FCC/ IC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution
The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the warranty and user’s authority to operate the
equipment.
Warning
Use only Kyocera Wireless Corp.-approved accessories with Kyocera Wireless Corp. phones. Use of
any unauthorized accessories may be dangerous and will invalidate the phone warranty if said
accessories cause damage or a defect to the phone.
Copyright © 2000 Kyocera Wireless Corp. All rights reserved. Portions of the document are
Copyright © 1998 QUALCOMM Incorporated.
This user guide applies to the following Kyocera Wireless Corp. CDMA wireless
phone models:
• The QCP 820 phone:
Dual-Mode CDMA Digital and Analog Cellular Phones
• The QCP 1920 phone:
CDMA Digital PCS Phones
• The QCP 2700 phone:
Dual-Band, Dual-Mode CDMA Digital PCS and Analog Cellular Phones
[iii]
Dial
Shuttle:
Scroll
up
Push
in to
select
Scroll
down
[iv]
CONTENTS
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FUNCTION KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
DISPLAY ICONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
USING THE BATTERY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TURNING THE PHONE ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
YOUR LOCK CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STANDBY STATUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
POWER SAVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SHORT OR LONG FEATURES MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BASIC FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
MAKING A CALL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CORRECTING DIALING MISTAKES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DISPLAYING YOUR OWN PHONE NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LOCKING AND UNLOCKING THE KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
RECEIVING CALLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REDIALING CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MAKING EMERGENCY CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ADJUSTING VOLUME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CHANGING LANGUAGES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SETTING SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PERMANENT PHONE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SAVING NUMBERS TO THE PHONE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
RETRIEVING NUMBERS FROM PHONE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
[v]
CHANGING YOUR PHONE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DIALING NUMBERS FROM YOUR PHONE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ADVANCED PHONE BOOK FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
RECENT CALLS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PLACING A CALL FROM THE CALLS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CALLS LIST OPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FEATURE MENUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SWITCHING BETWEEN MENUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LONG MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SHORT MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LONG MENU ITEM DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PAGING, MESSAGING, AND VOICE MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
NEW MESSAGE ALERT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
VIEWING PAGES AND MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
VIEWING VOICE MAIL NOTIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
MESSAGE OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
LOW MEMORY WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
OUT OF MEMORY WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
INTERNET BROWSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
STARTING THE BROWSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
STARTING A BROWSER APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
[vi]
RETURNING TO YOUR HOME PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
EXITING THE BROWSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
NAVIGATING THE PHONE BROWSER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
INTERNET ALERTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SETTING UP A DATA CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SETTING UP OUTGOING DATA CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SETTING UP INCOMING DATA CALLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
IN-CALL STATUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
ORDERING ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
PHONE SAFETY AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
BACKGROUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
FOR BEST PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ANTENNA CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
CARING FOR THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
DRIVING SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ELECTRONIC DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
OTHER SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
WHERE TO FIND HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
YOUR SERVICE PROVIDER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
YOUR PHONE DOCUMENTATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
KYOCERA TECHNICAL SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
[vii]
[viii]
GETTING STARTED
Kyocera Wireless Corp. appreciates your business and is pleased you have selected a CDMA
wireless phone. The QCP 820, QCP 1920, and QCP 2700 phones defines new industry standards
and will give you many years of dependable service. Your new phone includes time-saving
features like these:
• Easy-to-read, four-line, lighted screen that includes a line for informative icons
• Lighted keypad
• Fast, convenient scroll and select “dial-shuttle,” shown in the illustration to the left
• Interactive menu prompts
• Inherent call privacy through Code Division Multiple Access (CDMA) encoding
• Exceptionally long battery life
• Any-key answer, speed dial, auto redial, and 99 memory locations for phone numbers
1
• Advanced features like voice mail notification, paging, and caller ID
• A variety of helpful accessories
• ... and more!
This section identifies the location of phone controls and function keys and describes the icons
that appear on its screen. It explains how to charge the battery and turn the phone on and off.
In addition, it describes some of the phone’s features.
1. Depending on services available from your carrier
[1]
FUNCTION KEYS
Use the following keys as described below.
Dial-shuttle. Use the dial-shuttle on the left side of the phone as you work with
menus and perform operations. Turn the dial up and down to scroll through
options and press it into the phone to perform actions, such as choosing a
feature or option.
Message. Press to view pages, text messages, and voice mail messages.
Clear. Use to erase numbers or characters from the screen or return to a
preceding menu. Press it one time to erase text. Hold it down to erase all text.
When working with a menu, press it one time to return to the preceding menu.
Hold it down to return to the standby screen.
Send. Press to place and receive calls or use features like call waiting and
three-way calling (see your service provider for details).
End. Press to disconnect a call or return to the standby screen from any menu.
... Numbers. Press to enter numbers or characters, and to choose menu items.
Power. Press to turn the phone on and off.
Star. Press to scroll to the left when entering text.
Pound. Press to scroll to the right when entering text.
[2]
DISPLAY ICONS
Icons, described below, convey information regarding phone operations.
Memory location. Conveys information, based on the open menu, in the
upper-left corner of the screen. For example, phone book memory location
number “L01,” recent calls list number “C07,” or feature menu number “F01.”
Digital mode. Appears when the phone is operating in CDMA digital mode. If it
does not appear, your phone is either operating in analog mode or service is not
available.
Signal strength. Shows the signal strength based on the number of lines that
appear; the more lines you see, the stronger the signal.
(If the signal is weak, extend the antenna. If you are in a building, try standing
near a window to increase the strength of the signal.)
No signal. Indicates service is not available, which means you cannot make or
receive calls. Wait a few minutes to see if you get a signal, or try moving into an
open area.
On call. Appears when a call is in progress.
Roaming. Appears when the phone is outside of its regular service area. If the icon
is flashing, it means you are completely outside your service area and different
calling rates may apply.
Envelope. Indicates you have received a new voice mail, page, or text message.
Press
for details.
Battery charge. Shows the remaining battery charge. The more black you see, the
greater the charge.
Keyguard. Indicates the keypad is protected from accidental keypresses. You can
receive calls or messages when the keyguard is activated, but you can’t place a
call or perform operations.
Scroll up. Allows you to scroll through menu items using the dial-shuttle.
Scroll down. Allows you to scroll through menu items using the dial-shuttle.
Select. Indicates the menu item that will be selected if you press the
dial-shuttle.
[3]
USING THE BATTERY
The phone comes with a rechargeable battery pack. Three types of batteries are available for use
with this phone. Remember to fully charge the battery as soon as its charge gets low to
maximize available talk and standby times.
Installing and removing the battery
The battery pack snaps easily into the back of the phone, bottom end first, for quick installation
and removal. To ensure you do not lose stored numbers and messages, always turn off the phone
before removing the battery.
Charging the battery
The battery charge level icon appears in the upper-right corner of the phone’s screen.
FULLY CHARGED
VERY LOW
ALMOST OUT
When the battery charge level is low, the message “Low Battery” appears and the phone sounds
a tone. If the battery level becomes too low, the phone turns itself off and any function in
progress is not saved.
NOTE: Charge your battery when you see the icon begin to blink. Use the standard Kyocera
Wireless Corp. AC adapter charger or the optional travel charger, desktop charger, or cigarette
lighter adapter to recharge the battery.
NOTE: You do not need to completely discharge the battery before charging. Unlike other battery
systems, lithium ion has no memory effect that could degrade battery performance.
WARNING: Use only Kyocera Wireless Corp.-approved chargers and adapters. Using another adapter may be dangerous and
will invalidate the phone warranty if said accessories cause damage or a defect to the phone.
1. If the battery is not installed, snap it into place on the back of the phone—bottom
end first.
2. Plug the standard AC adapter into a wall outlet.
3. Insert the other end of the cord into the bottom of the phone. A message indicating
the battery is charging should appear immediately. Charging a completely discharged
standard Extended Li-ion battery takes approximately 6 hours; the Slim Li-ion battery
takes approximately 4 hours; and the Ultra-Light Li-ion battery takes approximately
2.5 hours (see Accessories later in this guide).
NOTE: If the phone is turned on, “CH” appears in the upper-left corner of the screen and
indicates the battery is charging. If the phone is turned off, the message “Battery is Charging”
appears.
[4]
TURNING THE PHONE ON AND OFF
When you make or receive a call, always extend the antenna and hold the phone above your
shoulder to ensure the best voice quality possible.
Turning on the phone
Ensure that a charged battery is installed in the back of the phone or that external power is
available (that is, the AC adapter, cigarette lighter adapter, or car kit is properly plugged in).
1. Press
momentarily. The message “LOOKING FOR SERVICE” appears on the screen.
2. Release
.
Turning off the phone
1. Press
for a few seconds until “POWERING OFF” appears.
2. Release
.
When the phone is turned off, nothing appears on the screen (unless you are charging the
battery).
NOTE: If
press
is pressed for less than 1 second, the phone will not turn off. You must
for more than 1 second.
YOUR LOCK CODE
Your phone is assigned a four-digit lock code. This code is used to access the Security menu
Typically, the lock code on a new or recently activated phone is the last four digits of its phone
such as 0000, 1234, or some number assigned specifically to you.
STANDBY
Standby status results when the phone is turned on and whenever
is pressed. When the
phone is in standby status the programmable banner, which includes the time and date, appears.
You have access to the phone’s features from standby.
NOTE: The time and date is automatically acquired from the CDMA digital network. You do not
need to set it.
[5]
POWER SAVE
The power save mode feature automatically turns on if the phone hasn’t been able to acquire a
signal after 15 minutes of searching. While this feature is active, the phone’s battery charge is
saved and the phone automatically rechecks for service periodically. To manually force the phone
to recheck for service, press any key. A message on the screen indicates the phone is in power
save mode.
SHORT OR LONG FEATURES MENU
The phone offers the choice between the use of an extensive long features menu or an
abbreviated short features menu. The long menu allows you to view and change all of the feature
settings of the phone. The short menu provides access to just a few often-used features. It’s
likely that you’ll need only the short menu after you personalize and fully set up your phone (see
the Feature Menus chapter of this guide for more information).
NOTE: The instructions in this guide are based upon the long features menu structure.
[6]
BASIC FUNCTIONS
Your phone is easy to use and has many time-saving features.
MAKING A CALL
First, ensure that the phone is on, as described in the Getting Started chapter of this guide.
1. Press the keys to enter the phone number.
2. Press
or press the dial-shuttle two times. If the phone is locked or another
problem exists, a help message appears.
3. Press
to end the call.
CORRECTING DIALING MISTAKES
➤ Press
to erase one character at a time.
or
➤ Press and hold
for at least 1 second to delete all characters.
DISPLAYING YOUR OWN PHONE NUMBER
If your phone has service and you do not know the number, you can display the phone number
assigned to the phone.
1. Select “Features,” by pressing the dial-shuttle.
2. Scroll and select “Directory” in the same way.
3. Select “My Number.”
NOTE: If the short features menu is active, select “Features” and then scroll and select “My
Number” to see your phone’s number.
LOCKING AND UNLOCKING THE KEYPAD
You can lock the keypad to avoid accidentally pressing a key. When the keypad is locked, you can
press
to receive an incoming call or message. However, you cannot lock the keypad when
a call is in progress.
The quick method of activating the keyguard is shown below. This feature is also available via
the long features menu.
Locking the keypad
➤ Press the dial-shuttle until the message “Keypad is now guarded” appears.
[7]
Unlocking the keypad
➤ Press
to unlock the keypad.
Your phone must be turned on to receive calls.
Answering calls
1. Press
2. Press
(unless the any-key answer feature is activated).
to end the call.
NOTE: When you are outside your regular service area (
appears on the screen), a distinctive
ringing sound indicates you may be billed differently if you answer the call. See your service
provider for information.
Call waiting
Call waiting1 allows you to respond to an incoming call while you are on another call. Two beeps
indicate the presence of an incoming call. You can either answer the call or ignore it. If you
answer it, you can alternate between the two calls. See your service provider for more
information.
1. Press
2. Press
to respond to the incoming call.
again to alternate between two callers.
Three-way calling
Your service provider may offer three-way calling. A three-way call occurs when an established
two-party call adds one more caller.
1. Once a call is in progress, enter the third party’s number and press
.
2. Press to connect the three parties. See your service provider for details.
Redialing your last outgoing call
➤ Press
to redial the last outgoing phone number.
Redialing from the recent calls list
You can use the recent calls list to redial any of the last ten unique outgoing phone numbers.
➤ Press to redial the last outgoing phone number.
1. Dependent on services available from your carrier
[8]
You can dial 911 or one of three other emergency numbers from your emergency number list,
even if the phone is locked. Your service provider may have preprogrammed the three emergency
numbers for you. As long as
appears on the phone’s screen, you can make emergency calls.
Making emergency calls
1. Press
or one of the other three emergency numbers.
2. Press
.
Saving and editing emergency numbers
You can easily add or edit phone numbers in your emergency number list.
1. Select “Features.”
2. Scroll and select “Security.”
3. Enter the lock code. Typically, the lock code is initially set to the last four digits of
your phone number (see page 5).
4. Scroll and select “EMERGENCY #.”
5. Select “Edit”
[9]
5. Turn the dial-shuttle until you see the language you want to use, then press the
dial-shuttle.
SETTING SERVICE
Use the menu option “Set System” or “Set Service” to prevent your phone from making or
receiving calls outside your service area. The same menu lets you control whether your dual-band
phone operates in digital or analog mode.
On the QCP 820 phone, you can limit operation to analog mode using the “Force Call” setting
QCP 820 phone
1. From standby mode, select “Features.”
2. Scroll and select “Network.”
3. Scroll and select “Set System.”
4. Turn the dial-shuttle to scroll through the options, then press the dial-shuttle to select
an option. Available options are:
• AUTOMATIC. This is typically the default setting, which allows the phone to search
for and acquire the preferred service.
• no roaming. This option prevents your phone from making or receiving calls outside
your home location.
• A side only or B side only. These options refer to the two cellular blocks. By
selecting one block, you prevent your phone from operating on the other block.
QCP 1920 phone
1. From standby mode, select “Features.”
2. Scroll and select “Network.”
3. Scroll and select “Set Service.” The default setting is “AUTOMATIC.”
4. Scroll and select “no roaming” if desired.
5. From standby mode, select “Features.”
6. Scroll and select “Network.”
7. Scroll and select “Set Service.”
• AUTOMATIC. This is the default setting, which allows the phone to operate while
roaming. It searches for digital service first, then analog service. Scroll to view the
other options and select by pressing the dial-shuttle.
• no roaming. The phone cannot send or receive calls outside its regular service area.
[10]
• dig. only. The phone sends and receives calls in digital mode only. Digital calls offer
clearer voice quality, enhanced privacy, and longer battery life.
• analog only. The phone sends and receives calls in analog mode only. This setting
remains in effect until you turn off the phone, at which point it automatically
reverts to the previous setting.
QCP 2700 phone
1. From standby mode, select “Features.”
2. Scroll and select “Network.”
3. Scroll and select “Set Service.”
• AUTOMATIC. This is the default setting, which allows the phone to operate while
roaming. It searches for digital service first, then analog service. Scroll to view the
other options and select by pressing the dial-shuttle.
• no roaming. The phone cannot send or receive calls outside its regular service area.
• dig. only. The phone sends and receives calls in digital mode only. Digital calls offer
clearer voice quality, enhanced privacy, and longer battery life.
• analog only. The phone sends and receives calls in analog mode only. This setting
remains in effect until you turn off the phone, at which point it automatically
reverts to the previous setting.
[11]
PERMANENT PHONE BOOK
The phone has memory for 99 of your friends, relatives, and associates. You can store entries of
up to 32 digits with an associated name up to 12 characters. There are two ways to access the
entire phone book.
• When a call is not in progress (the phone is in standby status): Turn the dial-shuttle one
click in either direction to the “SAVED #S” screen. Turn it down another click to enter the
“Phone Book.”
• Regardless of whether a call is in progress: Select “Features,” then ”Directory,” then
“Phone Book.”
SAVING NUMBERS TO THE PHONE BOOK
You can save numbers through the “Directory” menu or directly from the phone’s standby state
(the fastest way). If you’re starting from standby, begin at step 4 below. Use memory locations 1
to 9 for one-touch dialing of your most commonly used phone numbers.
1. Select “Features.”
2. Scroll and select “Directory.”
3. Select “Save.”
4. Enter the phone number that you want to save.
5. Select “Options.”
6. Select “Save.”
7. If you prefer, enter a name to go with the number—up to 12 characters long.
Press the key labeled with the letter you want. Pressing a key repeatedly changes the
letter or number in the flashing cursor position on the screen. When you have the
correct letter or number in position on the screen, wait about two seconds for the
cursor to automatically advance one space. Press
to correct any mistakes. Turn
the dial-shuttle to move the cursor forward and backward.
8. Select “Save” to store entered name.
9. Select “Save” at the “Save in location...” prompt to store the entry. Or, if desired,
scroll to select (or enter) a custom storage location and follow the remaining “Save”
prompts.
[12]
RETRIEVING NUMBERS FROM PHONE BOOK
There are several ways to find numbers in the phone book. This section assumes you’re at the
standby status display and not on a call. (You can go to standby by pressing
, or the phone
book can be retrieved during a call through the “Features” menu.)
Retrieving all memory locations
1. Turn the dial-shuttle up or down one click to access the “SAVED #S” screen.
2. Turn it down one more click to access “Phone Book.”
3. Scroll through the entries, one entry at a time. The location number of each entry is
displayed in the upper left corner of the screen (L01, L02, etc.).
4. Select “Options” to see more information. Press
to place a call to that number.
Retrieving one entry by memory
Location number
1. Enter one or two digits corresponding to the location number where the phone book
memory is stored.
2. Select “Options.”
3. Scroll and select “RECALL LOC #.”
Retrieving by name search
1. Turn the dial-shuttle to the “SAVED #S” screen.
2. Select “Find Name.”
3. Enter a sequence of identifying letters. At least two letters are recommended for a
quick search (such as "wh" for “what’s-his-name”).
4. Select “Find.”
5. Scroll to the desired entry in the list provided.
6. Select “Options” to see more information on that number or press
to call.
Retrieving by part of phone number search
You can look for a phone number if you know at least three of the digits.
1. Enter any three consecutive digits from the phone number.
2. Select “Options.”
3. Scroll and select “Find Number.”
4. Any matches will appear. If there are multiple matches, scroll to the desired entry.
[13]
CHANGING YOUR PHONE BOOK
Erasing a stored memory
There are two ways to erase a memory.
From a phone book entry display (meaning you’re already looking at the entry you would like to
remove):
1. Select “Options.”
2. Scroll and select “Erase.”
3. Confirm that you want to erase by selecting “Erase.”
Or from the standby display:
1. Select “Features.”
2. Select “Directory.”
3. Scroll and select “Erase.”
4. Select an entry and confirm that you want to erase it.
Editing a stored memory location
1. Select “Features.”
2. Select “Directory.”
3. Scroll and select “Edit.”
4. Scroll to find entry or enter its location number.
5. Select to “Edit” the entry.
6. Choose to edit name, phone number, or location number.
7. Edit the name using
through the name. Use the digit keys to replace letters or add new letters, and
or
(or by turning the dial-shuttle) to move the cursor
Edit the phone number or storage location by turning the dial-shuttle to move the
cursor to the digit(s) to be edited. Once the cursor is in position, change the number
by using the digit keys to insert or replace digits, and
8. If necessary, select “Options.”
9. Select “Save.”
to delete digits.
[14]
DIALING NUMBERS FROM YOUR PHONE BOOK
You can make a call using any phone book memory location either by speed dialing, one-touch
dialing, or by pressing
while viewing the memory location.
Speed dialing
You can quickly dial numbers that are saved in your phone’s phone book with just a couple of key
presses.
1. Press the key(s) that correspond to the numeric memory location. For example, for
memory location 10, press
2. Press . The phone will find the telephone number in its phone book, display it on
the screen, and then dial it.
.
One/ two-touch dialing
One/ two-touch dialing enables you to dial phone book entries through one key press (for
locations 1 to 9) or two key presses (for locations 10 to 99).
You can activate one-touch dialing through the “Touch Dial” item via “Extras” under the long
FOR MEMORY LOCATIONS 1 TO 9:
• Press and hold the appropriate key for 1.5 seconds. The display will confirm that the
number has been dialed when it shows “CALLING...”
FOR LOCATIONS 10 TO 99:
1. Press the first digit.
2. Press and hold the second digit for 1.5 seconds.
Dialing from a memory list
1. Turn the dial-shuttle to the “SAVED #S” screen.
2. Turn it another click to enter the phone book.
3. Scroll and select the phone book memory you want.
4. Press
or press the dial-shuttle twice.
Dialing from a phone book memory location
While viewing any memory location, press
or press the dial-shuttle twice.
ADVANCED PHONE BOOK FEATURES
Pause
When you call automated systems (such as voice mail), you often have to enter a series of digits
(such as a password). Instead of manually entering the same numbers every time, you can store
them in your phone book separated by special characters called pauses. While dialing the
number, you’ll have to depress the dial-shuttle to release the pause. (The screen will indicate
this.)
To insert pauses:
1. Enter the number to be dialed.
2. Select “Options.”
3. Scroll and select “Enter Pause.”
4. Enter the number tones that will follow the pause.
5. Dial the entered number by pressing
; or save it by selecting “Options” and
“Save.”
Linking
Linking is an extension of the Pause feature (listed above) that allows you to establish a path
between two series of digits (for example, a calling card or credit card number). You can link two
phone book memories when a number is too long to be stored with pauses in a single location
(you can store up to 32 digits in each location). While dialing the stored number, press the
dial-shuttle to release the digits in the linked memory location.
NOTE: Links are valid only from the initial phone book location.
To insert links:
1. Enter the number to be dialed.
2. Select “Options.”
3. Scroll and select “Enter Link.”
4. Enter a one- or two-digit number corresponding to a phone book memory location. For
example, enter “10” to release all of the numbers stored in that memory location
number.
5. Dial the entered number by pressing
; or save it by selecting “Options” and
“Save.”
Punctuation characters for name entry
You can use any of the nine punctuation characters (- “ . ‘ , & ( ) :) while you’re entering names
during phone book memory storage or editing. Press
appropriate character.
repeatedly until you see the
[16]
Changing case during name entry
When entering a name, you can use both upper and lower case letters. Press the appropriate
number key until you see the letter and case you need. After upper case, the sequence repeats in
lower case.
Viewing a number
If the complete number doesn’t fit on the screen, you can view all 32 digits by doing the
following.
1. Recall a phone book memory.
2. Select “Options.”
3. Scroll and select “View Number.”
Restricting an entry
You can restrict memory locations so they can be accessed only after a lock code is entered.
1. Select “Features.”
2. Scroll and select “Security.”
4. Scroll and select “RESTRICT #.”
5. Enter the location number that you want to restrict or scroll to the desired location.
6. Select “RESTRICT.”
Complete the same steps to “unrestrict” a previously restricted number. You will then be able to
display, dial, or erase the number without first entering the security code.
[17]
RECENT CALLS LIST
To facilitate redialing, the phone keeps a list of the last 10 unique numbers that you dialed,
answered, missed, or added. New entries replace older entries as calls are received.
There are two ways to access the calls list.
• In standby (not in a call): Turn dial-shuttle one click in either direction to the “SAVED
#S” screen, then up another click to enter the “Calls List.”
• In a call or in standby: Select “Features,” then scroll to select ”Directory,” then “Calls
List.”
Depending on the operating mode and available features, each entry may contain the phone
number, name, length of the call, and time stamp (which reminds you when the call occurred).
You may see one of the following entries when viewing a calls list entry:
MISSED CALL Indicates an unanswered incoming call if the caller ID (phone number) is
available.
CALL FROM
Indicates a call you received and answered if the caller ID (phone number) is
available.
CALL TO
Indicates a call you placed.
ADDED
Indicates that the number was added using the scratch pad feature.
3-WAY CALL
You can place a call directly from the calls list.
• Press
or press the dial-shuttle two times.
When viewing a particular call list entry, select “Options” for additional information or options.
You can sele eYst.
[18]
FEATURE MENUS
There are two different feature menus that let you check or change different feature settings.
The long menu includes every possible menu option. The short menu consists of the most
frequently used menu items. When the Long Feature menu is active, the flashing number at the
top left corner of the screen indicates the menu number.
SWITCHING BETWEEN MENUS
The menu trees on the following pages show the structure of the long and short menus.
To use the long menu:
1. Select “FEATURES.”
2. Scroll and select “Display.”
3. Scroll and select “Menu Length.”
4. Scroll and select “LONG.”
To use the short menu:
1. Select “Features.”
2. Scroll and select “Display.”
3. Scroll and select “Menu Length.”
4. Scroll and select “short.”
LONG MENU
You can access all menu items by using either the dial-shuttle or the keypad. The blinking
number in the upper left corner indicates the menu number. The overall structure appears as
follows.
[20]
F11: Ringer Volume
F12: Mute/ UnMute
F13: Keybeep Volume
F14: Earpiece Volume
F15: Ringer Type
F-1: Sounds
F16: Key Sound
F17: Beep Length
F18: Message Beep
F21: All Calls
F22: Recent Calls
F23: Minute Alert
F24: Auto-Off
F-2: Timers
F-3: Directory
F-4: Extras
F31: My Number
F32: Save
F33: Erase
F34: Edit
F35: Find Name
F36: Phone Book
F37: Calls List
F41: Key Guard
F42: Touch Dial
F43: Auto-Retry
F44: Auto-Answer
F45: AnyKey Answer
F46: Scratch Pad
Features
F51: Lock Phone
F52: New Code
F53: Restrict #
F54: Limit Calls
F55: Master Reset
F56: Erase Book
F57: Erase Calls
F58: Emergency #
F-5: Security
F61: Banner
F62: Backlight
F63: Auto-Hyphen
F64: Sort Book
F65: Language
F66: Menu Length
F-6: Display
F-7: Network
F71: Roam Alert
F72: Drop Alert
F73: Priv. Alert
F74: Auto-N.A.M.
F75: Set N.A.M.
F76: Set System/ Set Service
F77: Force Call (the QCP-820™ phone)
F77: Data/ Fax In (the QCP-1920™ and QCP-2700® phones)
SHORT MENU
The short menu is a subset of the long menu. You must use the dial-shuttle to access any menu
item; shortcut keypad entries do not work with the short menu. The short menu structure
appears as follows.
Ringer Volume
My Number
Phone Book
Saved #s
Find Name
Calls List
Features
Lock Phone
Set Service (the QCP-1920™ and QCP-2700® phones)
Long Menu
LONG MENU ITEM DESCRIPTIONS
Menu items available only on the QCP 820 and QCP 1920 phones are identified in the following
list by an asterisk (*). Menu items available only on the QCP 2700 phone are identified by two
asterisks (**).
Sounds (Menu 1)
This lets you adjust any sound-related feature.
Ringer Volume (Menu 11): Adjust incoming call ringer and new message alert volume
with or . The “escalating” setting starts the ringing out quietly and gradually gets
[21]
louder with each ring.
Mute/ Unmute (Menu 12): Switch the microphone on and off during a call. When the
microphone is off, the other party can’t hear you.
Keybeep Volume (Menu 13): Adjust the volume that the keys make when you press them.
Earpiece Volume (Menu 14): Adjust the earpiece (speaker) volume. Turning the dial-shuttle
during a call will adjust this setting as well.
Ringer Type (Menu 15): Choose from ten possible ringer sounds.
NOTE: Calls will automatically generate a distinctive ringing sound when you are outside
your regular service area, as noted on page 8.
Key Sound (Menu 16): Select either beep tones or click sounds.
Beep Length (Menu 17): Set key beep tone length (how long the beeps will be played over the
air from a single key press). The “long” setting may be necessary for older answering
machines or automated systems that require long key press tones.
Message Beep (Menu 18): The beep signaling an incoming message can be deactivated if
desired, or an additional reminder beep can be added.
Timers (Menu 2)
These features include items that keep track of your air time and make the most of your battery
life.
All Calls (Menu 21): Displays length of all calls during the lifetime of the handset in minutes
and seconds and the number of calls made. This information is not resettable.
Recent Calls (Menu 22): Displays length of all calls in minutes and seconds and number of
calls. This information is resettable.
Minute Alert (Menu 23): Produces an audible alert 10 seconds before the end of each minute
during a call.
Auto-Off (Menu 24): Enables you to set the phone to turn off automatically after a specified
time. Time remaining before shutoff is shown on the display. Pressing any key will restart
the countdown. When the phone is turned off, the auto-off feature is disabled until
activated again.
Bill Timer (Menu 25): If enabled by your service provider, this feature provides additional
timer information according to their billing methods. It is usually used only on phones
that are being rented.
[22]
Directory (Menu 3)
This allows access into the phone number storage capabilities including the phone book, recent
calls list, and your phone’s own number.
Phone Book (Menu 36): Finds either one specific memory or an entire list of phone book
entries (page 13).
Calls List (Menu 37): Accesses the last ten calls made, received, missed, or added and to see
the duration and time/ date of a call (page 18).
Extras (Menu 4)
This allows you to access various extra features.
Key Guard (Menu 41): Allows you to lock the keypad so you won’t accidentally press the keys
Touch Dial (Menu 42): Allows you to dial memory locations by just pressing and holding digit
Auto-Retry (Menu 43): Set length of time that the phone waits before automatically redialing
a number when a call attempt has failed. Busy-line tones through the earpiece speaker
(that is, if the call encounters the called party’s busy signal) are not considered call
failures.
Auto-Answer* (Menu 44): Sets the phone to automatically answer incoming calls. This works
only if you’re using the hands-free car kit accessory.
Any-Key Answer* (Menu 45): Allows you to answer the phone using any key except
.
Scratch Pad (Menu 46): Allows you to enter a phone number and save it to the temporary calls
list.
[23]
Security (Menu 5)
You must enter the four-digit lock code to see any items in this menu. The typical default code is
the last four digits of your phone number (see page 5).
Lock Phone (Menu 51): Locks phone from use. When it is locked, you can only make
emergency calls.
New Code (Menu 52): Allows you to enter a new four-digit lock code, replacing the old code.
Restrict # (Menu 53): Allows you to restrict (or unrestrict) a phone book memory so that the
number can’t be displayed, searched for, dialed, erased, or edited without entering the
four-digit lock code.
Limit Calls* (Menu 54): Restricts (or unrestricts) outgoing calls to those numbers stored in
the phone book and to designated emergency numbers. Also, when this feature is
activated, you cannot save, edit, or erase phone book entries.
Master Reset (Menu 55): Resets the phone’s settings back to the factory defaults except the
phone book memories and calls list.
Erase Book (Menu 56): Clears all phone book memories.
Erase Calls (Menu 57): Clears all calls list entries.
Emergency # (Menu 58): Lets you enter three numbers that can be entered and dialed even
Display (Menu 6)
This allows you to choose what you see on the display.
Banner (Menu 61): Lets you enter and edit a banner that appears in line 1 of the display
during standby. You might want to put your name here.
Backlight (Menu 62): Lets you to choose the length of time the display and keypad
backlighting stays on after any keypress is made.
Auto-Hyphen (Menu 63): If set to on, the phone will automatically add hyphens as you enter
numbers according to the North American Numbering Plan. For example,
“619-123-4567.”
Sort Book (Menu 64): Determines order of phone book memory entries. The “BY LOC #”
setting will sort numbers sequentially (by their phone book location number) and the
“alphabetic” setting will sort the entries alphabetically.
Language (Menu 65): Lets you to select English, French, Portuguese, or Spanish text.
[24]
Menu Length (Menu 66): Selects long or short feature menu. The short menu includes only a
few often-used items while the long menu includes all of the many features of the phone.
Network (Menu 7)
This allows you to set some service provider network settings.
Roam Alert (Menu 71): Sounds an audible alert when roaming conditions occur.
Drop Alert (Menu 72): Displays text and sounds an audible alert when a call is dropped due to
a signal fade.
Privacy Alert (Menu 73): Sounds an audible alert whenever the enhanced voice privacy
availability changes after call setup.
Auto-N.A.M. (Menu 74): Allows the phone to automatically switch on one of the programmed
NAMs (Number Assignment Module—which is basically another way to say “phone
number”), if necessary.
Set N.A.M. (Menu 75): Allows you to set two different NAMs (Number Assignment
Module—which is basically another way to say “phone number”).
Set System*/ Set Service** (Menu 76): This feature is set in accordance with the cellular or PCS
company system your phone uses. Leave this setting as “AUTOMATIC” unless you want to
alter the system selection as described in the Basic Functions section.
Force Call* (Menu 77 for the QCP-820 phone): forces the phone into analog mode for the
next call or the next ten minutes.
Data/ Fax In (Menu 77 for the QCP-1920 and QCP-2700 phones; Menu 78 for the QCP-820 phone): Sets the
phone in a mode capable of receiving incoming data calls or fax calls. (It is not necessary
for outgoing data/ fax calls.) Normal incoming voice calls cannot be received when this
feature is activated.
[25]
PAGING, MESSAGING, AND VOICE MAIL
This feature lets you receive messages when your phone is turned on. A single key,
, allows
you to access your messages while a four-line display permits easy viewing. While reading a
message, you can return a call to the callback number provided in the message simply by
pressing
.
Messages are stored in the phone’s memory. Older, previously viewed messages are deleted when
space is required, unless you “lock” a message. The phone has the capability of storing at least
twenty 30-character messages. However, the number of messages decreases if messages contain
more than 30 characters.
NOTE: Check with your service provider regarding the availability of this feature. The information
contained in a message, such as time stamp and callback number, depends on the mode in which
the phone is operating and the service provider’s network capabilities.
This phone supports four types of messages:
1. MESSAGE:
2. PAGE:
Typically contains text.
Typically contains digits.
3. VOICE MAIL
NOTIFICATION:
Typically indicates the number of new voice mail messages in your voice
mailbox. You must call your voice mail number to listen to these messages.
Follow your service provider’s directions for retrieving voice mail messages.
(Your service provider administers voice mail services.)
4. NET ALERT:
NEW MESSAGE ALERT
The phone will notify you of a new message by a display on the screen, four short beeps (if
icon at the top
of the display. If a message is marked URGENT, this icon will flash. Plus, the first line of the
display will contain asterisks (*) on each side of the label, as shown below.
Only one step is needed to acknowledge the new message.
➤ Press
to access the “MESSAGES” menu, or press any other key to return to the display
that was present before the alert. The backlight will flash and (if enabled) a reminder beep
will occur every three minutes until the new message is acknowledged.
[26]
VIEWING PAGES AND MESSAGES
These messages may consist of a time stamp, a callback number, a name (only if the callback
number matches one of your stored phone book numbers), and text. You can view both new and
old text messages.
Reading text messages and pages
1. Press
. The display will show the number of voice, new text, and old text messages.
2. Scroll and select the “NEW TEXT” line. You will see the messages in the order they were
received except for any urgent messages, which will be displayed first. You can also select
“OLD TEXT” to see the old messages in the order that they were read.
Messages will automatically scroll page by page.
To manually scroll through the message line by line, rotate the dial-shuttle. To
manually scroll page by page, press the dial-shuttle in. The end of the message is
signified by a solid line and the “OPTIONS” text. Select “OPTIONS” or follow the next
step. (The available options are listed on the next page of this guide under the
“MESSAGE OPTIONS” section.)
3. Press
to place a call to the callback number.
NOTE: When there are no new messages, the phone will indicate this. When viewing a callback
number, you can save it in your phone book memory by selecting “OPTIONS” then “SAVE.”
However, the number is already saved in your phone book if a name is displayed above the
callback number.
VIEWING VOICE MAIL NOTIFICATIONS
Voice mail notifications tell you how many new voice mail messages are in your mailbox. Only
the most recent voice mail notification will be stored in the phone; previous messages will be
overwritten. The messages themselves are not stored on your phone. You must call your voice
mail service to retrieve them.
Viewing voice mail notifications
1. Press
2. Select the “NEW VOICE” line.
The voice mail notification message will automatically scroll page by page. To manually
.
scroll through the notification line by line, rotate the dial-shuttle. To manual scroll
page by page, press the dial-shuttle in. At the end of the notification, select
“OPTIONS” (as described below) or follow the next step.
3. Press
to place a call to the callback number, if included, to retrieve your messages.
[27]
MESSAGE OPTIONS
At the end of any message, you can choose “OPTIONS.” There are separate options for text
messages and voice mail notifications. You can select one of the following options for both types
of messages:
• “ERASE MSG” to delete the message from memory
• “SEND” to make a call to the callback number if it has been included with the message
• “SAVE NUMBER” to store the number in your phone book. You can select one of the
following options for text messages only.
• “NEXT MSG” to view the next message in the stack
• “LOCK MSG” to keep the message from being automatically deleted when space is
required
NOTE: Lock only the important messages or memory may become limited, as discussed below.
LOW MEMORY WARNING
The phone will alert you by beeping and with a text display when the amount of available
message memory is less than 25%. Although the phone can still receive new messages, this is a
warning that you should erase messages you no longer need to avoid running out of memory.
OUT OF MEMORY WARNING
When the phone has no more available message memory, it cannot accept new messages. When
this occurs, the phone will display an “OUT OF MEMORY” message. At this point you must
immediately delete unneeded messages if you wish to receive new messages. The network may
not be able to keep them for very long.
[28]
INTERNET BROWSER
You can use your phone to browse the Internet if you subscribe to phone Internet services, and
over-the-air Internet access for your phone model is available in your area. Contact your service
provider for details. The microbrowser in your phone can access Internet-based information such
as:
• Stock quotes
• Weather
• News headlines
• White pages
• Travel
• Entertainment
You may also have access to personal information such as e-mail, your calendar, or a personal
address book. Your service provider determines the type of applications you can use, and will
notify you when new applications become available.
These applications are designed to work seamlessly on your phone. They provide information
quickly and conveniently right on the phone display. Please keep in mind, however, that while
the number of accessible sites on the World Wide Web continues to grow, not all sites are
properly formatted for your phone.
STARTING THE BROWSER
1. Make sure your phone is turned on, then press
. The MESSAGES screen appears.
2. Use the dial-shuttle to scroll and select “Launch Net.” The phone automatically
connects to the Internet. After a brief introductory screen, the phone displays your
phone browser home page. Your service provider determines what appears on this
home page, but may permit you to edit it from your Web page on a computer. The
following illustration shows a typical home page.
More
[29]
1. From the home page, use the dial-shuttle to scroll through the list of available
applications.
2. When the arrow cursor points to the application you want, press the dial-shuttle.
You can return to the home page at any time.
• Press
keypress.
NOTE: When entering data, press
way to the beginning of the line, pressing
to go directly to the home page or press
to back up one step for each
to erase the last character. When you backspace in this
again backs you out of the screen.
to move the text cursor and press to return to the
Alternatively, press
preceding level.
and
• When you are on the home page, press
to exit the browser and return to standby
mode.
or
At any time, press and hold
standby mode.
for about 2 seconds to exit the browser and return to
Getting around in the phone browser is easy. If you are already familiar with both the World Wide
Web and your Kyocera Wireless Corp. phone, it will be even easier.
One or two context-sensitive menu choices appear at the bottom of the phone
[30]
Once it is received you can look at that page for any length of time without
incurring additional phone charges. However, as soon as you follow a link or
press the dial-shuttle to submit an entry, the phone establishes a new call.
SENDING When you enter data on a screen and press the dial-shuttle to accept it, the
phone sends, or “uploads,” the data to the application.
Icons
Padlock. Indicates that the current Web page is secure. This means it is safe to enter
confidential data, such as a credit card number. This data encryption is much more secure
than using your cordless phone at home.
On call. Indicates that you are on a call and may be incurring phone charges. The phone
browser is designed to minimize billable time. Your service provider can tell you exactly
how you are billed for Internet calls.
Scroll up. Indicates that you can scroll through menu items using the dial-shuttle.
Scroll down. Indicates that you can scroll through menu items using the dial-shuttle.
INTERNET ALERTS
Some browser applications allow you to set up the Internet to send you a “net alert” when an
important action has occurred. For example, you may want to know when you’ve received new
e-mail or when you’ve sold shares of stock. The phone will beep, and
and “NET ALERT”
appear on the screen when one of these alerts is received (similar to receiving pages, messages,
or voice mail notifications).
To access more detail on the net alert:
1. Press
and scroll down to NET ALERTS.
2. Select “NET ALERTS.” Newly received net alerts are marked by an asterisk (*).
NOTE: If you select one of the items on the net alerts list, the browser will be launched and
more information will be accessed from the Internet server.
To erase net alerts:
1. Move within the Net Alerts folder as instructed above and select “Erase...”.
2. Scroll and select the alert you wish to erase.
[31]
DATA
Some service providers allow you to use your phone to make data calls (for example, e-mail and
Internet access) or to send and receive faxes. To do this you must connect the phone to a
computer or other computing device using the Data/ Fax Cable or the Data On the Go®
Fax/ Modem PC Card (available separately; see the Accessories chapter of this guide).
NOTE: Your phone cannot receive voice calls when the Data feature is activated.
SETTING UP A DATA CONNECTION
Data Connectivity Kit
To set up a connection using the Data Connectivity Kit:
1. Install the product software that sets up your phone as a wireless modem.
2. Plug the flat connector on one end of the Data Cable into the port on the bottom of
the phone.
3. Plug the serial connector at the other end of the Data Cable into the serial port on
your computer.
4. Open a communications software package on your computer to access data.
Data On the Go Fax/ Modem PC Card
To set up a connection using Data On the Go PC card:
1. Install the Data on the Go Fax/ Modem PC Card.
2. Read the Quick Start card for installation instructions.
3. Plug the flat connector on one end of the Data On the Go Fax/ Modem PC Card data
cable into the port on the bottom of the phone.
4. Plug the other end of the data cable into the PC card slot.
5. Open a communications software package on your computer to access data.
SETTING UP OUTGOING DATA CALLS
With the data connection made, just originate a call through the PC’s communication software.
Do not enter the number you are dialing on the phone keypad, and do not press the Send key.
[32]
SETTING UP INCOMING DATA CALLS
Due to infrastructure limitations, there may be times when your phone cannot determine if an
incoming CDMA call contains voice or data information. Check with your service provider to see
if they support both voice and data signals. If the network does not know how to distinguish
between voice and data calls, and you are expecting a data call, you can set the phone to data
mode as discussed below. Incoming voice calls are not possible when you are in this mode.
1. From standby mode, select “Features.”
2. Scroll and select “Network.”
3. Scroll and select “Data/ Fax In.” The default setting is OFF.
4. Scroll in either direction and select from the list of data/ fax choices. To make a setting
for just the next call or the next 10 minutes, select either:
• fax call
or
• data call
To make a setting that will persist until it is changed or until the phone is turned off
and on again, select either:
• fax only
or
• data only
Again, please remember that no voice calls can be received if “Data/ Fax In” is set to anything
other than OFF.
IN-CALL STATUS
During a data or fax call, the screen on your phone will show:
• A time counter for the call
• The data call type
• The data rate
• Whether the phone is transmitting or receiving
[33]
ACCESSORIES
ORDERING ACCESSORIES
To order accessories, contact your service provider or visit the Kyocera Wireless Corp. website at
You can purchase a number of accessories for your phone, including the following:
• batteries
• desktop chargers
• portable chargers
• car-lighter adapters
• hands-free car kits
• leather carrying cases
• data connectivity cables and software
[34]
PHONE SAFETY AND CARE
The hand-held portable telephone is one of the most exciting and innovative electronic products
ever developed. It lets you stay in touch wherever you go.
BACKGROUND
Your telephone is a low-power radio transmitter and receiver. When it’s on, it receives and also
sends out radio frequency (RF) signals. When you use your phone, the system handling your call
controls the power level at which your phone transmits.
Exposure to radio frequency signals
In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards bodies:
• American National Standards Institute (ANSI) C95.1 1992
• National Council on Radiation Protection and Measurements (NCRP) Report ‘86 1986
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996
Those standards were based on comprehensive and periodic evaluations of the relevant scientific
literature. For example, 120 scientists, engineers, and physicians from universities, government
health agencies, and industry reviewed the available body of research to develop the ANSI
standard (C95.1). The design of your phone complies with the FCC guidelines (and those
standards).
FOR BEST PERFORMANCE
To properly operate the phone and maintain safe and satisfactory service, follow these rules.
• Extend the antenna fully.
• Hold the phone with the antenna extended and over your shoulder.
• Do not hold the phone antenna at any time. Contact with the antenna affects call quality
and may cause the phone to operate at a higher power level than otherwise needed.
• Do not use the phone if the antenna is damaged.
• Speak directly into the mouthpiece.
• Use the phone when the car is stopped.
Avoid exposing the phone and accessories to rain or liquid spills. If the phone becomes wet, turn
the power off immediately and remove the battery pack. If the phone becomes inoperable, return
it to the dealer for service.
[35]
Only authorized personnel should install or service the phone and its accessories. Faulty
installation or service may be dangerous and may invalidate the warranty.
ANTENNA CARE
Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the phone and may violate FCC regulations.
CARING FOR THE BATTERY
For best battery performance, follow these guidelines.
• Use only Kyocera Wireless Corp.-approved battery packs and Kyocera Wireless Corp.
chargers.
• Do not charge the battery pack in temperatures outside of 32°F to 122°F (0°C to 50°C)
because damage could occur.
• Do not use the battery charger in direct sunlight or in places with high humidity such as
the bathroom.
• Never dispose of the battery pack by a fire.
• Keep the metal contacts on the battery pack clean.
• Do not attempt to disassemble or short circuit the battery pack.
• You may need to recharge the battery if it has not been used for a long time.
• Replace the battery when it no longer provides acceptable performance. The battery pack
may be recharged hundreds of times before it will need to be replaced.
• Do not store the battery pack for long periods in places where high temperatures
frequently occur.
Follow these storage rules:
LESS THAN 1 MONTH: -4°F to 140°F
(-20°C to 60°C)
MORE THAN 1 MONTH: -4°F to 113°F
(-20°C to 45°C)
• Li-ion batteries do not have a “memory” effect.
DRIVING SAFETY
Talking on the phone while driving is extremely dangerous, and in some states in the U.S. and
some countries it is illegal. Remember, safety comes first.
[36]
Check the laws and regulations on the use of phones in the areas where you drive. Always obey
them.
Also, if using your phone while driving please:
• Give full attention to driving. Driving safely is your first responsibility.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call, if driving conditions require.
• If you must use the phone while driving, please use one-touch, speed dialing, and
auto-answer modes.
An airbag inflates with great force. DO NOT place objects, including both installed or portable
wireless equipment, in the area over the airbag or in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the air bag inflates, serious injury could result.
WARNING: Failure to follow these instructions may lead to serious personal injury and possible
property damage.
ELECTRONIC DEVICES
Most modern electronic equipment is shielded from RF energy. However, certain electronic
equipment may not be shielded against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association (USA) recommends that a minimum separation of
six inches (6”) be maintained between a hand-held wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These recommendations are consistent with the
independent research by and recommendations of Wireless Technology Research.
If you have a pacemaker:
• ALWAYS keep the phone more than six inches from your pacemaker when the phone is
turned on.
• Do not carry the phone in a breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, turn your phone off
immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In the event of such
interference, you may want to consult your service provider (or call the customer service line to
discuss alternatives).
[37]
Other medical devices
If you use any other personal medical device, consult the manufacturer of your device to
determine if it is adequately shielded from RF energy. Your physician may be able to assist you in
obtaining this information.
Turn your phone off in health care facilities when any regulations posted in these areas instruct
you to do so. Hospitals or healthcare facilities may be using equipment that could be sensitive
to RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its representative regarding your vehicle. You should
also consult the manufacturer of any equipment that has been added to your vehicle.
Posted facilities
Turn your phone off in any facility where posted notices so require.
OTHER SAFETY GUIDELINES
Aircraft
FCC regulations prohibit using your phone while in the air. Switch off your phone before
boarding an aircraft.
Blasting areas
To avoid interfering with blasting operations, turn your phone off when in a “blasting area” or in
areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Potentially explosive atmospheres
Turn your phone off when in any area with a potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury
or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They
include fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas
where the air contains chemicals or particles, such as grain, dust, or metal powders; and any
other area where you would normally be advised to turn off your vehicle engine.
[38]
[39]
WHERE TO FIND HELP
There are several ways for you to get help with your Kyocera Wireless Corp. phone.
YOUR SERVICE PROVIDER
For questions about your phone and phone service, contact your service provider first. Your
service provider’s customer support department can answer questions about your phone, phone
bill, call coverage area, and specific features (such as call forwarding or voice mail) available to
you.
YOUR PHONE DOCUMENTATION
If you have questions about the features of the phone, refer to this guide and other materials
provided with your phone. To view or download the most current version of this user’s guide,
visit us at www.kyocera-wireless.com.
KYOCERA TECHNICAL SUPPORT
If you have additional questions, contact the Kyocera Wireless Customer Care Center in any of
these ways:
• U.S.and Canada: 1 (800) 349-4478
• Other Countries: 1 (858) 882-1400
Before requesting support, please try to reproduce and isolate the problem. When you contact
support, be ready to provide the following information:
• The name of your service provider
• The actual error message or problem you are experiencing
• The steps you take to reproduce the problem
• The Electronic Serial Number (ESN) of the phone. You will find the ESN on the back of the
phone by removing the battery.
[40]
INDEX
dialing from memory location 15
dial-shuttle 2
A
accessories 1
directory 23
driving safety 36
aircraft 38
analog mode 10
antenna 3, 5
any-key answer 1, 23
auto-hyphen 24
automatic scroll 27
E
editing
numbers 14, 23
editing numbers 7
emergency numbers 9, 24
end key 2, 5
B
entering
backlight 24
battery
name 12
care 36
punctuation 16
erase numbers or characters 2
erasing
charge level 4
installing 4
calls list 24
best battery performance 36
best performance 5, 35
phone book 24
extra features 23
C
F
fax calls 25, 32
erasing 24
calls
finding
my number 7, 23
phone numbers 13, 23
frequency 35
credit card 16
emergency 9
incoming 8
redialing 8
function keys 2
car kit 5
I
CDMA 1
clear digits 7
clear key 2
code division multiple access 1
correcting dialing mistakes 7
K
key beep
tone length 22
keybeep
sound 22
D
volume 22
keyguard 3, 23
keypad lock 7
data calls 25
data connectivity kit 32
desktop charger 4
L
[41]
linking 16
R
locking
recalling last number dialed 23
recalling memory locations 13
receive signal strength indicator 3, 9
redial 8
ringer 9
volume 21
roam alert 25
memory locations 17
message 28
low battery 4
M
manual pauses 16
master reset 24
memory
editing 23
low 28
memory locations 1
out of 28
retrieving 13
storage 23
S
saving numbers in phone book 12
scratch pad 23
searching 13
menu
select 3
send key 2
message key 2
minute alert 22
setting service 10
sorting phone book 24
sounds 21
O
standby screen 2
standby status 5
standby time 4
one-touch dialing 15
P
pause dialing 16
phone book
storing
advanced features 16
dialing from 15
editing 14
T
talk time 4
retrieving from 13
saving numbers to 12
phone number
pound key 2
travel charger 4
V
off 5
on 5
save mode 5, 6
privacy alert 25
punctuation entries 16
[42]
|