COLOUR TELEVISION
INSTRUCTIONS
Contents
Safety precautions......................... 2
Set up and connections................. 3
Initial settings................................. 5
Remote control buttons
and functions................................. 6
LT-32EX17
LT-37EX17
LT-42EX17
TV buttons and functions............... 7
Operating the menus..................... 8
Picture setting................................ 9
Original features for picture......... 12
Sound setting .............................. 13
Customized setting...................... 14
TV channel presetting ................. 16
Troubleshooting........................... 17
CH/CC List................................... 19
Specification................................ 20
This illustration shows LT-32EX17.
The illustrations of LT-32EX17 is used in this instruction manual for explanation
purpose. Your TV may not look exactly the same as illustrated.
GGT0147-001B-H
Set up and connections
Check accessories
Please read the user manuals of each device carefully before setup.
It is necessary to connect an aerial to watch TV.
■ Connect with other devices ꢀ “Connecting external devices” (P.4)
■ Insert the batteries
Remote control
(RM-C1920)
Use two “AA/R06” dry cell batteries.
Insert the batteries item the ·and,
making sure the ªand ·position
are correct.
Connect an aerial and VCR / DVD Player
AERIAL
“AA/R06” Batteries
For confirming
the TV works
VIDEO-3
INPUT
R
L/MONO
V
S
Care when setting
■ Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
(Except China, Russia : connect to a 220-240V, 50/60Hz AC outlet.)
■ When attaching the TV to the wall, use the optional JVC wall
mounting unit.
OR
• Consult a qualified technician.
• JVC assumes no responsibility for damage due to improper mounting.
• 200mm x 200mm mount which conforms to VESA standards.
■ Installation requirements
• To avoid overheating, ensure the unit has ample room.
VCR (DVD Player)
200mm
• After all the connections have been made, insert the plug into an AC
outlet.
• If both composite and S-VIDEO cables are connected, S-VIDEO will
be enable.
150mm 50mm
150mm
50mm
3
Set up and connections (continued)
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setting up.
(Connecting cables are not supplied with this TV.)
Connecting external
]signal direction
VIDEO-1
Watching DVDs
DVD player
(HDMI compatible)
Output
Input
]
•
•
Composite signal/
Component signal
Sound L / R
IN HDMI
VCR / DVD Player
Use component signal:
“Video-1 Setting” (Page 15)
]
Amplifier
VIDEO-2
Watching videos
(L)
(R)
Output
Input
HDMI
]
•
•
Composite signal
Sound L / R
OUT
VIDEO/AUDIO
(DIGITAL)
INPUT
R
L
V
OUTPUT
VIDEO-1
IN HDMI
VIDEO-3
Watching videos
L
R
L
V
Y
VCR / DVD Player
]
]
VIDEO-1
INPUT
Output
Input
Pr/Cr
Pb/Cb
R
•
•
Composite signal/
S-VIDEO
Sound L / R
VIDEO-2
INPUT
AUDIO
(ANALOG)
Game consoles
Video camera
R
L
V
VIDEO-3
INPUT
Use S-VIDEO:
R
L/MONO
V
S
If both composite and S-VIDEO
cables are connected, S-VIDEO will
enable.
]
VIDEO-3
VIDEO-2
Connecting
HDMI devices
HDMI
Output
Input
•
HDMI signal
• “HDMI Setting” (Page 15)
OUT
Video and sound signal of a TV
channel you are viewing outputs from
this terminal.
]
Headphone
Output
Headphone
•
•
Composite signal
Sound L / R
4
Initial settings
Turn on the TV.
Automatically register channels
AUTO PROGRAM
CH 28
14%
1
2
4
5
6
• Show only when powering on for the first time.
• The power on the unit can also be used.
Select a language
Check what was registered
EDIT
LANGUAGE
Select
PR
AV
01
02
03
04
05
06
ID
CH/ CC
CH 04
CH 09
CH 02
CC 76
CC 78
CH 05
CH 07
ENGLISH
‰∑¬
Tieáng Vieät
УKPAЇHCЬKA
CASTELLANO
OK
FRANÇAIS
PУCCKИЙ
Set
■ Edit Channels
\ “TV channel presetting” (P. 16)
Select the teletext language group
TELETEXT LANGUAGE
Confirm
GROUP – 1
GROUP – 2
GROUP – 3
GROUP – 4
GROUP – 5
Select
OK
3
• For the teletext language group
\ “Teletext Language” (P. 12)
• If the characters are unreadable
\ “Teletext Language” (P. 12)
5
Remote control buttons and functions
MUTING
POWER
MENU
Turn the volume Off / On
Turn the TV on from standby
View the Teletext (P. 12)
TV/VIDEO
Select TV or Video input
Operate the menu
Display menu on screen menu (P. 8)
OK
DISPLAY
BACK
Channel information
To previous screen
Change channel / page
ECO
Adjust picture contrast according to room
Turn on “CINEMA SURROUND”
Change the aspect ratio
RETURN+
ZOOM
To teletext (P. 12)
CHANNEL
VOLUME
RETURN PLUS function
Return to the frequently viewed channel.
Adjust the volume, Turn off Muting
MODE
Choose the channel you want to programme
View the Teletext (P. 12)
RETURN PLUS
PROGRAMMED!
Press and hold
FAVOURITE CHANNEL (P. 12)
To cancel
Select Channel
Select the desired channel number.
RM-C1920
RETURN PLUS
CANCELED!
Press and hold
For Hyper Scan:
CHANNEL
PR changes without changing the
RETURN function
picture. Once you stop pressing
CHANNEL+ or CHANNEL- button,
picture will change to the desired PR.
If you have not set or have canceled the RETURN
PLUS channel, this will return to the previously
viewed channel.
Press and hold
6
TV buttons and functions
TV/VIDEO
MENU/OK
Switch between TV / VIDEO devices
Display on-screen menu / set
Change channel / page
Hyper Scan Function
CHANNEL
VOLUME
Volume
Power On / Off
Remote control sensor
Power lamp
ON: Lit (Green)
OFF: Unlit
To headphones (P. 4)
●
Power lamp lights while
the TV is on.
7
Operating the menus.
Menu
Item
PICTURE MODE
BACK LIGHT
CONTRAST
BRIGHT
Adjustments / Configurations
Picture mode (BRIGHT / SOFT / STANDARD)
Backlight brightness (Darker jBrighter)
Contrast (Lower jHigher)
1 Display the menu bar
MENU
PICTURE
SOUND
FEATURES
SET UP
Brightness (Darker jBrighter)
SHARP
Sharpness (Softer jSharper)
2 Select a menu
COLOUR
Colour (Lighter jDeeper)
Select
TINT
Tint (Reddish jGreenish) Only NTSC
FEATURES
Finer picture adjustments. (WHITE BALANCE /
DIGITAL VNR / DigiPure / PULL DOWN /
OK
COLOUR MANAGEMENT / PICTURE MANAGEMENT /
COLOUR SYSTEM / 4:3 AUTO ASPECT)
Next
PICTURE
■
STEREO / I II
Mode / Languages (
: MONO /
: STEREO /
PICTURE MODE
BACK LIGHT
CONTRAST
BRIGHT
SHARP
COLOUR
BRIGHT
3 Select an item
I : SUB1 / II : SUB2 / MONO)
Low tones (Weaker jStronger)
High tones (Weaker jStronger)
Select
BASS
Items
TREBLE
OK
BALANCE
CINEMA SURROUND
TIMER
Speaker balance (Left Stronger jRight Stronger)
TINT
FEATURES
Ambience level (HIGH / LOW / MONO / OFF)
Set timer for turning off or turning on the TV.
(ON TIMER / SLEEP TIMER)
4 Adjust / Configure
Set
CHANNEL GUARD
BLUE BACK
Stops children from watching specific channels
Displays a blue screen and mute the sound when the signal
is weak or absent. (ON / OFF)
OK
PICTURE MODE
STANDARD
CHILD LOCK
Disables the front control buttons of the TV. (ON / OFF)
Adjust / Select
AUTO SHUTOFF
Set the power to turn off if no signal is received and no
operation is performed for about 15 minutes. (ON / OFF)
FAVOURITE SETTING
APPEARANCE
Clear favourite channel settings.
■ When adjusting with
the sliding-bar
Format for displaying the channel number and menu screen
(TYPE A / TYPE B).
Set
OK
ECO MODE
Adjust picture contrast according to room bright.
(OFF / ECO-1 / ECO-2)
Select
Move
AUTO PROGRAM
EDIT / MANUAL
LANGUAGE
Automatically registers channels.
Change registered channels or add new ones.
Select a language for on-screen menus.
■ When adjusting from
presets
Set
VIDEO-1 SETTING
For use with video players and other devices.
(VIDEO / COMPONENT)
OK
(
STANDARD
)
AI VOLUME
Prevent sudden increase or decrease of sound when
changing channels. (ON / OFF)
Select
The item will change.
TELETEXT LANGUAGE
HDMI SETTING
Select a language for Teletext programmes.
●
Some items have a
sub-menu.
HDMI: Size (1 / 2 / Auto)
Audio (DIGITAL / ANALOGUE / AUTO)
8
Picture setting
COLOUR SYSTEM
WHITE BALANCE
You can select the appropriate colour system when the picture is not clear
or no colour appears.
You can change the white balance of the picture to better match the type
of video being viewed.
MENU
PICTURE menu
FEATURES
WHITE BALANCE
MENU
COLOUR SYSTEM
PICTURE menu
FEATURES
WARM
COOL
MID
Reddish white
Bluish white
Normal white balance
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
For the colour system in each country or region, see the table below:
Area
Country or Region
System
BACK LIGHT
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore, Thailand,
India, China, Vietnam, Hong Kong, etc.
PAL
You can change the backlight brightness.
Asia,
Middle East
MENU
PICTURE menu
BACK LIGHT
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
SECAM
NTSC
Choose
1 : Darker
2 : Brighter
SECAM
Europe
Czech Republic, Poland, Germany, Holland, Belgium,
UK, etc.
PAL
CONTRAST
Australia, New Zealand, etc.
Republic of South Africa, Nigeria, etc.
Egypt, Morocco, etc.
Oceania
Africa
PAL
PAL
You can change the contrast of the picture.
SECAM
MENU
PICTURE menu
CONTRAST
PICTURE MODE
Choose
1 : Lower
2 : Higher
You can choose the desired picture setting.
MENU
PICTURE menu
PICTURE MODE
BRIGHT
You can change the brightness of the picture.
BRIGHT
SOFT
Heightens contrast and sharpness.
Softens contrast and sharpness.
Standard picture setting.
MENU
PICTURE menu
BRIGHT
STANDARD
Choose
1 : Darker
2 : Brighter
9
Picture setting (continued)
SHARP
DigiPure
You can change the sharpness of the picture.
You can set the picture for a natural-looking outlines.
MENU
PICTURE menu
SHARP
MENU
PICTURE menu
FEATURES
DigiPure
Choose
1 : Softer
2 : Sharper
ON
Set to a natural-looking picture.
Function is turned off.
OFF
COLOUR
PULL DOWN
You can change the sharpness of the picture.
You can set the picture for smooth cinema film.
MENU
PICTURE menu
FEATURES
PULL DOWN
MENU
PICTURE menu
COLOUR
Choose
1 : Lighter
2 : Deeper
ON
Function is always on.
AUTO
OFF
Automatically adjusts.
Function is turned off.
TINT
ECO MODE
You can adjust Tint only in NTSC.
You can adjust TV screen contrast according to the brightness of your
room.
MENU
PICTURE menu
TINT
Choose
1 : Reddish
2 : Greenish
ECO
ECO MODE
OFF
DIGITAL VNR
You can also operate this function from the menu.
You can cut down the amount of noise in the original picture.
MENU
PICTURE menu
FEATURES
DIGITAL VNR
MENU
FEATURES menu
ECO MODE
ON
OFF
Reduce the picture noise.
Function is turned off.
OFF
Function is turned off.
ECO-1
ECO-2
Mild contrast (recommended)
Even contrast.
Note: For component progressive and HDMI signal, the DIGITAL VNR
function cannot operate.
10
Picture setting (continued)
4:3 AUTO ASPECT
COLOUR MANAGEMENT
You can change the aspect ratio.
You can set the picture for a natural-looking pictures.
MENU
PICTURE menu
FEATURES
COLOUR MANAGEMENT
MENU
PICTURE menu
FEATURES
4:3 AUTO ASPECT
14:9 ZOOM
ON
OFF
Maintain a natural colour balance.
Function is turned off.
PANORAMIC
16 : 9
REGULAR
4 : 3
14 : 9
Select a default aspect ratio for Auto in “ZOOM”
PICTURE MANAGEMENT
ZOOM
AUTO
REGULAR
Select
You can fix the brightness and the darkness of the pictures.
ZOOM
PANORAMIC
14 : 9 ZOOM
16 : 9 ZOOM
16 : 9 ZOOM SUBTITLE
FULL
OK
MENU
PICTURE menu
FEATURES
PICTURE MANAGEMENT
Set
ON
Make it easier to view bright / dark pictures.
Function is turned off.
OFF
●
●
Using “AUTO” : Auto in “ZOOM”
When 720p (750p) or 1080i (1125i) signal is received, the signal will
be displayed as “FULL”. The zoom menu will not be displayed.
BLUE BACK
DEMO MODE
You can set the TV to automatically change to a blue screen and mute the
sound if the signal is weak or absent, or when there is no input from an
antenna or connected devices.
You can confirm the effect of “PICTURE MANAGEMENT”.
(Yellow)
Press
to “DEMO MODE”.
MENU
FEATURES menu
BLUE BACK
-%.5ꢀ/+
The other hand, you can display “DEMO MODE” by press
of TV buttons at the same time.
and
6/,5-%
ON
OFF
Function is turned on.
Function is turned off.
11
Original features for picture
TELETEXT
FAVOURITE CHANNEL
You can watch the Teletext broadcast channel with TEXT function.
You can register and recall 4 favorite channels to a button.
■ Register the favourite channel:
TV mode
TEXT twin mode
TEXT mode
1
1 While the channel is displayed.
2 Selecting other Teletext pages.
SET
1 – 4?
CHANNEL
OR
OR
Hold down for 3 seconds.
2 Press the number button (number 1 to 4 button only) to register it on.
“PROGRAMMED!” appears on the screen and current channel is
registered.
TV/VIDEO
to return to the TV mode.
3
■ Recall the favourite channel:
You can also operate the teletext using the following buttons:
Hold a teletext page.
To cancel, press the button again.
Display the hidden information (example: answers to a quiz).
To cancel, press the button again.
Enlarge the teletext display.
(Hold)
1
(Reveal)
FAVOURITE
1 – 4?
(Size)
(Cancel)
Watch TV programme while waiting for a teletext page.
When the teletext page is found, a page number appears at
the upper left of the screen.
2 Press the number you registered. The favorite channel will appear on
the screen with mark beside the channel number.
Check your favourite channels.
Press the button to view the teletext page.
Return to the index page instantly.
(Index)
MODE and
(LIST MODE)
Press Display and confirm that the channels you have registered have a
beside them.
Bookmark your favourite page, press MODE button then
select a coloured button to save your page to (red, green,
yellow and blue). Enter the number of the page to save. Then
press ¤ button for save your favourite page. Recall your
favourite page, press the coloured button.
If the favourite channel hasn’t been registered, then “NO MEMORY”
will be displayed.
y (Sub-page)
Sub-page numbers are displayed at the bottom of the screen.
To cancel sub-page function, press the button again.
■ Delete the favourite channel:
Group
Group-1
Group-2
Languages
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish
MENU
FEATURES menu
FAVOURITE SETTING
Select the favourite channel
1
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian,
Swedish, Finnish
FAVOURITE SETTING
1
PR 01
PR 03
PR 04
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech,
Slovak, English, German
Group-3
Group-4
Group-5
that you want to delete the
channel from the Favourite
channel.
2
3
4
OK
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish,
Finnish
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish,
Finnish
(Blue)
2 Press
to delete.
• If the character are unreadable. \Select different teletext language group.
12
Sound setting
BASS
CINEMA SURROUND
You can adjust the low tone of the sound.
You can enjoy an ambient sound.
MENU
SOUND menu
BASS
Choose
1 : Weaker
2 : Stronger
CINEMA SURROUND
OFF
TREBLE
You can adjust the high tone of the sound.
You can also operate this function from the menu.
MENU
SOUND menu
TREBLE
MENU
SOUND menu
CINEMA SURROUND
Choose
1 : Weaker
2 : Stronger
HIGH
LOW
For stereo sound
BALANCE
For stereo sound (when the sound distorts in “HIGH” mode)
For mono sound (emulates a stereo-like sound)
Function is turned off.
You can adjust the high tone of the sound.
MONO
OFF
MENU
SOUND menu
BALANCE
Choose
Choose
1 : Turn the left speaker’s volume level up.
2 : Turn the right speaker’s volume level up.
AI VOLUME
SOUND SYSTEM
You can prevent sudden increase or decrease of sound when changing
channels.
For the sound system in each country or region, see the table below:
Area
Country or Region
System
MENU
SET UP menu
AI VOLUME
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,
Indonesia, Malaysia, Singapore, Thailand, India, etc
B/G
ON
OFF
Set to prevent sudden increase or decrease of sound.
Function is turned off.
China, Vietnam, etc.
D/K
I
Asia,
Middle East
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
■
B/G
M
STEREO / I II
You can enjoy the stereo and bilingual broadcasted programmes.
D/K
B/G
I
■
STEREO / I II
MENU
SOUND menu
Europe
Select to MONO sound.
Select to STEREO sound.
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, Egypt, Morocco, etc.
Oceania
Africa
B/G
I
I
Select to bilingual sound. (SUB I)
Select to bilingual sound. (SUB II)
Select to MONO sound.
II
MONO
B/G
This function is only available in RF mode.
13
Customized setting
Set the ON TIMER to your desired period of time by press the number
button. When the ON TIMER is set to other than 00:00, the ON TIMER
is activated. You can set the period of time to a maximum of 12 hours in
1 minute intervals.
SLEEP TIMER
3
You can set the TV to turn off automatically to standby mode after a set
time.
(Blue)
MENU
FEATURES menu
TIMER
SLEEP TIMER
1
2
To off the ON TIMER, set the ON TIMER to 00:00 or press
button.
Note : If TV is not in standby mode when ON TIMER is reach the setting
time, this case is not available.
SLEEP TIMER
Select a time in minutes.
0
120
OK
OFF
AUTO SHUTOFF
Set
You can set the TV to turn off automatically when no signal is received for
about 15 minutes or longer after the end of a broadcast.
Cancel
Remaining
Set the time to “0”.
MENU
FEATURES menu
AUTO SHUTOFF
You can confirm the remaining time, after repeating this
process.
ON
OFF
Set the power to turn off.
Function is turned off.
Note : When the remaining elapse time is one minute, “GOODNIGHT”
appears on the screen.
ON TIMER
APPEARANCE
You can set the TV to turn on automatically from standby mode at a set
channel and time.
You can set the format for displaying the channel number and menu
screen.
MENU
FEATURES menu
APPEARANCE
MENU
FEATURES menu
TIMER
ON TIMER
1
2
TYPE A
TYPE B
Set to the transparent format.
Set to the solid format.
ON TIMER
Select PR Channel.
PR
ON TIME
01
00 : 00
OK
CHILD LOCK
Set
You can disable the front control buttons of the TV.
Choose the PR (channel) that you want to watch when the TV turns on.
External input and AV position cannot be chosen for PR.
MENU
FEATURES menu
CHILD LOCK
ON
OFF
The front control buttons cannot operate.
Function is turned off.
14
Customized setting (continued)
LANGUAGE
VIDEO-1 SETTING
You can disable the front control buttons of the TV.
You can set the VIDEO-1 SETTING according to the video signal output
from external devices connected to the VIDEO-1 terminal.
MENU
SET UP menu
LANGUAGE
MENU
SET UP menu
VIDEO-1 SETTING
CHANNEL GUARD
VIDEO
For normal video signal
You can stop children from watching specific channels.
COMPONENT
For component video signal
MENU
FEATURES menu
CHANNEL GUARD
1
2
For connection \Page 4.
FEATURES
TIMER
CHANNEL GUARD
BLUE BACK
)
Select “CHANNEL GUARD”
(
(
(
ON
ON
ON
)
)
)
0
OK
CHILD LOCK
HDMI SETTING
AUTO SHUTOFF
FAVOURITE SETTING
APPEARANCE
ECO MODE
)
(
(
TYPE B
OFF
)
)
You can set the HDMI SETTING according to your liking.
MENU
SET UP menu
HDMI SETTING
Enter an “ID No.” (A secret
number of your choice)
3
4
SET ID NO.
SIZE
AUDIO
1 / 2 / AUTO
OK
0000
DIGITAL / ANALOGUE / AUTO
3
Set
To the next column
Note : SIZE is displayed only for 480p signal.
CHANNEL GUARD
PR
AV
01
02
03
04
05
06
ID
CH/ CC
CH 04
CH 04
CH 02
CH 12
CH 03
CH 05
CH 29
Select a channel to lock.
OK
SELECT THE EXTERNAL SOURCE
You can set the AV SELECT according to the connected device.
1
AV SELECT
TV/VIDEO
CHANNEL GUARD
Select
5
0
1
2
3
4
AV
or
PR
AV
01
02
03
04
05
06
ID
CH/ CC
CH 04
CH 04
CH 02
CH 12
CH 03
CH 05
CH 29
TV/VIDEO
VIDEO-1
VIDEO-2
VIDEO-3
HDMI
(Blue)
OK
Set
Note : TV/VIDEO button select the video source by move down or use
button 0-4 for selection.
• Lock more channels by repeat step 4 and 5.
(Blue)
• Release a channel by press
again in step 5.
• View a locked channel by use the numerical buttons to enter the
2 Operate the connected device.
channel number. When appears, press Display and enter your “ID No.”
(If you forget your “ID No.”, check it in step 2.)
15
TV channel presetting
To register the TV channels automatically
(AUTO PROGRAM)
(Red)
Edit a channel name
(ID)
1 Begin
Enter the first
character.
You can register the TV channels into the TV’s channel list (PR LIST)
automatically.
OK
2 Enter a channel name
MENU
SET UP menu
AUTO PROGRAM
1
2
3
Next column
Set
(Green)
Insert a channel
(INSERT)
OK
or
to start and to stop AUTO PROGRAM function.
1 Begin
Select
OK
2 Select a “CH/CC”
To EDIT / MANUAL menu appears.
3
3 Enter a number, then receives the broadcast
To edit the TV channels
(EDIT / MANUAL)
signal.
(Yellow)
Delete
1 Delete
1
2
MENU
SET UP menu
EDIT / MANUAL
(Blue)
Register a new
channel (MANUAL)
EDIT
1 Begin
2 Beginning channel search
PR
AV
01
02
03
04
05
06
ID
CH/ CC
CH 04
CH 04
CH 02
CH 12
CH 03
CH 05
CH 29
Select the channel.
OK
(Red)
(Green)
From high
frequencies
From low
frequencies
or
●
Auto-search begins, and the nearest fre-
quency is imported. (Repeat this step until
the desired channel is displayed.)
3 EDIT or MANUAL the channel.
Move a channel’s
(Green)
(Blue)
●
●
Channel fine tuning by
If the picture or sound
is unnatural.
/
OK
Move out
1 Begin
position (MOVE)
OK
Set a
sound
system.
OK
Select
2 Select a destination
OK
3 Finish
OK
Set
3 Finish
Move in
16
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Problem
Actions
Page
Problem
Actions
• Unnatural colour >>
Adjust “COLOUR” and “BACK LIGHT”.
Check your “COLOUR SYSTEM”.
If “AUTO” is selected, select the specific
colour system manually.
Page
Severe noise or snow
• Check the aerial cable and TV connections.
• Check the direction of the aerial.
• Check the aerial or its cable damaged or
not.
—
—
—
Poor picture quality
9
• Noise >>
Set to the following functions.
10
10
Patterns, stripes or noise • Interference caused by devices such as an
amplifier, personal computer, or a hair drier.
Move it away from the TV.
—
—
PICTURE MODE : STANDARD
DigiPure
: ON
• Dull picture >>
Set to the following functions.
Ghosting (Doubling of
images)
• Interference occurs caused by signal
reflecting from mountains or building. Try to
adjust the aerial’s direction or use another
antenna.
PICTURE MODE : BRIGHT
DigiPure
: ON
Strange picture when
using an external device.
• If the top of the image is distorted, check
the video signal quality itself.
—
—
Cannot turn it on
• Ensure the power cord is connected to the
AC outlet correctly.
—
• If movement appears unnatural when
receiving a signal from a DVD player, etc.
with 625p (progressive-scanning), change
the output setting of the external device to
625i (interlace-scanning).
Cannot operate the
remote control
• The batteries may be exhausted. Replace
with new batteries.
• Ensure that you are operating the remote
control at less than 7 meters from the front
of your TV.
—
—
Poor sound
• Adjust the “BASS” and “TREBLE”.
• If receiving a poor signal in “STEREO/I II”
switch to “MONO”.
13
13
■
Remote control stops
working.
• Unplug TV, several minutes later plug it in
again.
—
8
• Adjust the channel reception using
“MANUAL”.
16
15
—
Front control buttons do
not work.
• Switch “CHILD LOCK” to “OFF”.
For HDMI signal, wrong
screen size
• Switch “SIZE” in “HDMI SETTING” to “1” or
“2”.
• Press ZOOM to return to your settings.
Aspect ratio changes
unintentionally.
11
11
Green and distorted
screen for HDMI signal
• Wait a little for the signal to stabilize when
switching the signal format for an “HDMI”
device.
Blue screen appears on
the screen.
• Switch “BLUE BACK” to “OFF”.
17
Troubleshooting
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Problem
No picture,
No sound for HDMI signal
Actions
Page
• Use the cable marked with HDMI logo.
—
—
15
• Check if the device is compliant with HDMI.
• Switch “AUDIO” in “HDMI SETTING” to
“DIGITAL” or “AUTO” for HDMI devices, or
“ANALOGUE” or “AUTO” for DVI devices.
Some functions do not
work.
• It is not a malfunction. Some functions
(dark background) in the menu do not work
depending on the situation.
—
—
Black or white dots
appear on the screen.
• LCD panels use fine dots (“pixels”) to
display images. While more than 99.99% of
these pixels function properly, a very small
number of pixels may not light, or may light
all the time.
Please understand that this is not a
malfunction.
No picture,
No sound
• Some inputs do not output from OUT
terminal.
—
18
CH/CC List
To use the INSERT function, find the “CH/CC” number corresponding to the TV’s channel number from this table.
US:
CCIR:
OIRT:
The US channel numbers are the channel numbers used in the United States, Philippines, etc.
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
K
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
Channel
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
CH
L
US
CCIR
E2
OIRT
AUSTRALIA
AU-0
M
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
US-2
R1
N
US-3
E3
AU-1
O
US-4
E4
R2
R6
R7
R8
R9
AU-2
P
US-5
E5
AU-6
Q
US-6
E6
AU-7
R
US-7
E7
AU-8
S
US-8
E8
AU-9
T
US-9
E9
U
US-10
E10
E11
E12
R10
R11
R12
AU-10
AU-11
V
US-11
W
US-12
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
Channel
CC
US
CCIR
S-1
OIRT
AUSTRALIA
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
AU-5
S-2
S-3
S-4
S-5
S-6
AU-5A
S-7
S-8
S-9
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
S-18
S-19
S-20
S-21
S-22
S-23
A
B
C
D
E
F
G
H
I
X
Y
R3
R4
R5
Z
AU-3
AU-4
Z+1
Z+2
A-5
A-4
A-3
A-2
A-1
J
19
Specification
Main unit
Terminals / Connectors
Terminal name
Terminal type
Signal type (IN)
Signal type (OUT) Notes
Model
LT-32EX17
B / G / I / D / K / M
LT-37EX17
LT-42EX17
Broadcasting systems
Colour systems
VIDEO-1
RCA connectors x 6
Composite video, Analogue
component (576i (625i) / 480i (525i),
Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p)
AUDIO L/R
PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz
Channels and frequencies
VHF low channel (VL) = 46.25 to 140.25 MHz
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to
S10), super band (S11 to S20) and hyper band (S21 to
S41)
VIDEO-2
RCA connectors x 3
RCA connectors x 3
Composite video, AUDIO L/R
Composite video, S-video,
Input
terminals
VIDEO-3
HDMI
S-VIDEO connector x 1 AUDIO L/R
Sound-multiplex systems
Teletext systems
NICAM (I / B / G / D / K), A2 (B / G / D / K)
FLOF (Fastext), WST (standard system)
HDMI connector x 1
HDMI
Power requirements
AC 110V - 240 V, 50/60Hz
(Except China, Russia : connect to a 220-240V, 50/60Hz
AC outlet.)
(576i (625i) / 480i (525i) /
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p)
Audio output
(Rated power output)
6 W + 6 W
10 W + 10 W
10 W + 10 W
IN HDMI
RCA connectors x 2
AUDIO L/R
Speakers
(12 cm x 5 cm)
oblique x 2
(16 cm x 4 cm)
oblique x 2
(16 cm x 4 cm)
oblique x 2
MONITOR RCA connectors x 3
OUT
Composite video,
Audio L / R
Output
terminals
Power consumption
[Standby]
115 W
[1.4 W]
147 W
[1.1 W]
203 W
[1.1 W]
Headphone Stereo mini-jack x 1
(3.5 mm in diameter)
Headphone
output
Screen size
(Visible area size measured
diagonally)
80 cm
92 cm
105 cm
• We may change the design and specifications without notice.
Dimensions (W x H x D: mm) 800 x 595 x 230
[without stand]
919 x 651.7 x 230 1030 x 719.1 x 296
[800 x 545 x 99] [919 x 603.7 x 108] [1030 x 672 x 108]
Weights
[without stand]
13.3 kg
[12.5 kg]
19.4 kg
[18.3 kg]
23.5 kg
[22 kg]
Accessories
(See “Check accessories”, ꢀ P. 3)
© 2007 Victor Company of Japan, Limited
0407WKT-NF-MT
|