JVC AV 28KT1BUF AV 28KT1SUF User Manual

ENGLISH  
AV-28KT1BUF  
AV-28KT1SUF  
FRANÇAIS  
DEUTSCH  
ITALIANO  
CASTELLANO  
NEDERLANDS  
PORTUGUÊS  
COLOUR TELEVISION  
INSTRUCTIONS  
VICTOR COMPANY OF JAPAN, LIMITED  
TELEVISEUR COULEUR  
FARBFERNSEHGERÄT  
TELEVISORE A COLORI  
TELEVISOR A COLOR  
KLEURENTELEVISIE  
TELEVISOR A CORES  
MANUEL D'INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
ISTRUZIONI  
MANUAL DE INSTRUCCIONES  
GEBRUIKSAANWIJZING  
INSTRUÇÕES  
50038905  
©2003 VICTOR COMPANY OF JAPAN, LIMITED  
0503-JVC  
Contents  
Safety Precautions  
1. Power Source  
Safety Precautions .................................................. 1  
Remote Control Buttons ......................................... 2  
Control Panel Buttons............................................. 3  
Antenna Connections .............................................. 3  
The receiver should be operated only from a 220-240V AC,  
50 Hz. Outlet. Ensure you select the correct voltage setting  
for your convenience.  
2. Power Cord  
Preparation............................................................... 4  
Features .......................................................................... 4  
The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
or against them. Pay particular attention to cord where they  
enter the plug, power outlet, and the point where they exit  
from the receiver.  
Before Switching on your TV................................. 4  
Power connection............................................................. 4  
Aerial Connections ........................................................... 4  
How to connect the external equipments.......................... 4  
Inserting batteries in the remote control handset .............. 4  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
do not place objects filled with liquids on it as this may be  
dangerous.  
Switching the TV ON/OFF ....................................... 4  
ToswitchtheTVon.......................................................... 4  
ToswitchtheTVoff .......................................................... 4  
Initial Settings .......................................................... 4  
4. Cleaning  
T-VLINK .......................................................................... 5  
Operating with the onset buttons...................................... 6  
Operating with Remote Control......................................... 6  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System ............................................................ 6  
5. Ventilation  
Sound Menu..................................................................... 6  
Picture Menu ................................................................... 7  
Feature Menu................................................................... 8  
Install (Installation) Menu.................................................. 9  
Decoder(EXT-2) .............................................................. 10  
Program (Programming) Menu ....................................... 10  
TostartAutoProgram(AUTOSTORE) ............................ 11  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation.To prevent overheat-  
ing, these openings must not be blocked or covered in any-  
way.  
6. Lightning  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
Other Features....................................................... 11  
Sound Mute ................................................................... 11  
Information on Screen .................................................... 11  
ToDisplaytheTime........................................................ 11  
Picture Mode ................................................................. 11  
VCR Control Buttons...................................................... 11  
7. Replacement Part  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
Teletext ................................................................... 12  
TooperateTeletext ......................................................... 12  
ToselectapageofTeletext ............................................ 12  
ToSelectIndexPage ..................................................... 12  
Searching for a teletext page while watching TV............. 12  
ToSelectDoubleHeightText ......................................... 12  
ToReveal“concealed”Information .................................. 12  
ToStopAutomaticPageChange .................................... 12  
ToSelectaSubcodePage ............................................. 12  
ToexitTeletext ............................................................... 12  
FastextandToptext ....................................................... 12  
8. Servicing  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
10. Stand-By  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
Connect the External Equipments....................... 13  
Warning!  
Via the Euroconnector.................................................... 13  
T-VLINKcompatibleVCR .............................................. 13  
RGB mode ..................................................................... 13  
EXT-2SMode ................................................................. 13  
Via the RCA jacks.......................................................... 13  
Via theANT (aerial) socket............................................. 13  
TV and Video Recorder (VCR) ........................................ 13  
NTSC Playback ............................................................. 13  
Copy Facility.................................................................. 13  
Connecting Headphones ................................................ 13  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with li-  
cense and must not be operated.  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
Batteries, including those which are heavy metal-free, should  
not be disposed of with household waste. Please dispose of  
used batteries in an environmentally sound manner. Find out  
about the legal regulations which apply in your area.  
Tips.......................................................................... 15  
Specifications......................................................... 15  
ENGLISH - 1 -  
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
STANDARD Button (Picture Mode Change)  
Colour Buttons  
RED: Zoom (Picture Size) Change  
GREEN: Hyper Sound  
YELLOW: Factory Settings in Picture Menu  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
TeletextControlButtons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 2 -  
Control Panel Buttons  
Antenna Connections  
ENGLISH - 3 -  
Preparation  
Place TV on a solid surface.  
For ventilation, leave a space of at least 10 cm free all around  
theset.Topreventanyfaultandunsafesituations,pleasedo  
not place any objects on top of the set.  
“Use this apparatus in tropical and moderate climates.”  
Features  
• It is a remote controlled colour television.  
NOTE: Remove batteries from remote control handset when it  
is not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
• It can tune cable channels.  
• Controlling the TV is very easy by its menu driven system.  
Switching the TV ON/OFF  
• It has two Euroconnector sockets for external devices  
(such as video recorder, video games, audio set, etc.)  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
• FrontAV (EXT-3) Input available.  
• Stereo sound systems (German+Nicam) are available.  
FullfunctionTeletext(Fastext,Toptext).  
• It is possible to connect headphone.  
• Direct channel access.  
To switch the TV on  
Your TV will switch on in two steps:  
1- Press the power button located on the front of the TV.  
Then the TV switches itself to standby mode and the RED  
LED located below the TV turns on.  
2-ToswitchontheTVfromstand-bymodeeither:  
Press a digit button on the remote control so that a program-  
me number is selected,  
• AUTO PROGRAM (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
or,  
Press Standby / Power Button or Programme Up and Down  
buttons on the TV or on the remote control respectively, so  
the TV will switch on and the RED Led will turn GREEN.  
• Child Lock.  
• Blue Background.  
• T-V Link.  
To switch the TV off  
• Automatic sound mute when no transmission.  
• When no valid signal is detected, after 5 minutes the TV • Press the stand-by button on the remote control, so the TV  
switches itself automatically to stand-by mode.  
• WSS (Wide Screen Signaling).  
• NTSC Playback.  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Press the power button located on the front of the TV.  
Initial Settings  
Before Switching on your TV  
The message “PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM” will be displayed when you turn  
on your TV for the first time.  
Power connection  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
• After unpacking, allow the TV set to reach the ambient  
room temperature before you connect the set to the mains.  
Aerial Connections  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
How to connect the external equipments  
See “Connect the External Equipments” on page 14.  
• See the instruction manuals provided with the external de-  
vices too.  
1- Select LANGUAGE with “  
press the “ ” or “ ” button to select a menu language.  
“ or “  
” button, then  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
2- Select COUNTRY with “  
the “ ” or “ ” button to select the country you are now lo-  
cated.  
“ or “  
” button, then press  
• Insert two AA (R6) or equivalent type batteries inside.  
• Replace the battery cover.  
3- Select START with “  
“ or “  
” button, then press the  
“right” button to start AUTO PROGRAM  
AUTO PROGRAM, (Automatic Programming System) auto-  
matically programmes the received channels in your TV’s  
programme numbers. During AUTO PROGRAM, “AUTO  
PROGRAM IS RUNNING PLEASE WAIT” will be displayed.  
ENGLISH - 4 -  
After AUTO PROGRAM is finalized, the “PROGRAM” menu  
appears.  
Downloading data to VCR:  
The VCR will automatically download the registered data on  
the TV channels from the TV. This means you do not need to  
set up the programme channels on your VCR manually.  
To cancel AUTO PROGRAM, press the “STANDARD” but-  
ton.  
The “T-V LINK” menu will be displayed when you press the  
” button while “PROGRAM” menu is displayed, or when-  
ever the “INSTALL” menu operations are performed.  
Press “ ” button to start downloading data to VCR.  
• If you do not want to do, press the “STANDARD” button to  
exit the menu.  
You can delete a channel, insert a channel into a programme  
number, or re-start AUTO PROGRAM with the “PROGRAM”  
menu. For details, see “Program (Programming) menu”  
on page 10.  
When “FEATURE NOT AVAILABLE...” is displayed:  
If “FEATURE NOT AVAILABLE...” is displayed, the download  
was not performed correctly. Before trying to download again,  
check that:  
4- If you do not have a T-V LINK compatible VCR, press  
STANDARD” button to exit the menu.  
• The VCR power is turned on  
• The VCR is T-V LINK compatible  
• The VCR is connected to the EXT.2 terminal  
• The SCART cable is fully wired.  
If you have a T-V LINK compatible VCR connected to the  
EXT.2 terminal, press “ ” button to display “T-V LINK”  
menu. Then follow the operating procedure “Downloading  
data to VCR” in the following “T-V LINK” section.  
Direct Rec:  
What You See Is What You Record”  
You can easy record to VCR the images that you are watch-  
ing on the TV. For details, read the manual for your VCR,  
Use your VCR controls. You cannot carryout Direct Rec us-  
ing your TV’s control.  
If the message “PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM” does not appear, or if you want  
to modify the settings later, you can do manually with the  
FEATURE”, “INSTALL” and “PROGRAM” menus.  
When the VCR is not ready (for example when there is no  
tape inserted), “NO RECORDING” is displayed.  
T-V LINK  
In the following situations, the VCR will stop recording if the  
TV is turned off, if the TV channel or input is changed, or if  
the menu is displayed on the TV:  
When a T-V LINK compatible VCR is connected to the EXT.2  
TerminalontheTV,itiseasiertosetuptheVCRandtoview  
videos. T-V LINK uses the following features:  
• When recording images from an external device connected  
to the TV. (for example a camcorder)  
To use T-V LINK functions:  
A “T-V LINK compatible VCR” means a JVC video cassette • When recording a TV channel after it has been un-  
recorder with the T-V LINK logo, or with one of the following  
logos. However, these VCRs may support some or all of the  
features described earlier. For details, see your VCR instruc-  
tion manual.  
scrambled on a decoder.  
• When recording a TV channel by using the TV’s output be-  
cause the VCR’s own tuner cannot properly receive that  
channel.  
Q-LINK” (a trademark of Panasonic Corporation)  
Data Logic” (a trademark of Metz Corporation)  
Easy Link” (a trademark of Phillips Corporation)  
Megalogic” (a trademark of Grundig Corporation)  
SMARTLINK” (a trademark of Sony Corporation)  
TV auto power on/VCR image view:  
When the VCR starts playing, the TV automatically turns on  
and the images from EXT.2 (EXT-2) terminal appear on the  
screen.  
This function does not happen if your TV’s main power  
is turned off. Set your TV’s main power to on (standby  
mode).  
ENGLISH - 5 -  
Operating with the onset buttons  
Menu System  
Volume setting and programme selection can be made using  
the buttons on the right side of the TV.  
Your TV has been designed with a menu system. Display  
MENU” (main menu) and enter one of five menus (SOUND,  
PICTURE, FEATURE, INSTALL and PROGRAM).  
Volume Setting:  
1- Press “MENU” button to display “MENU” (main menu). The  
menu titles will be displayed in the main menu.  
• Press “  
-” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
2- Press “  
“ or “  
” button to select a menu title, then  
on the screen.  
press “ ” or “ ” button to enter the menu.  
Toexitamenu,pressSTANDARD” button.  
Togotothepreviousmenu,pressMENU” button.  
Programme Selecting:  
• Press “P/Ch+” button to select next programme or “P/Ch-”  
button to select the previous programme.  
Entering Main Menu:  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P/Ch+” or P/Ch-” button and  
enter the submenu using “  
+” or “  
-” button. To learn  
the usage of the menus, refer to “Menu System” on page 6.  
Operating with Remote Control  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
Sound Menu  
To change sound settings:  
• Press “MENU” button, now you are in main menu. In the  
main menu, SOUND will be the first selected option. Enter  
the sound menu pressing “ ” or “ ” button.  
Functions which you can use out of menu system are de-  
scribed below.  
Volume Setting:  
Setting Volume:  
Press “ ” button to increase volume.  
As you enter the sound menu, Volume will be the first select-  
ed option.  
Press “ ” button to decrease volume.  
• Press “ ” button to increase volume.  
• Press “ ” button to decrease volume.  
Programme Selecting (Previous or next programme):  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
Setting Bass Level:  
• Using “  
“ or “  
” button select Bass.  
• Press “ ” button to increase bass level.  
• Press “ ” button to decrease bass level.  
Programme Selecting (direct access):  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
• For a two digit program number enter the second digit after  
pressing the first digit within 2 seconds.  
Setting Treble Level:  
• Using “  
“ or “  
” button select Treble.  
• Press “ ” button to increase treble level.  
• Press “ ” button to decrease treble level.  
ENGLISH - 6 -  
Note: When Picture Mode is not “MANUAL”, BRIGHTNESS,  
CONTRAST and COLOUR options can not be reached by  
Setting Balance:  
• Using “ “ or “  
” button select Balance.  
“ or “  
” buttons.  
• Press “ ” button to change balance rightward.  
• Press “ ” button to change balance leftward.  
Factory Settings:  
In the Picture Menu if you press the YELLOW button the ad-  
justments switches themselves to the factory settings.  
Setting Brightness:  
You can change Brightness only when Picture Mode is se-  
lected MANUAL.  
Using “  
“ or “  
” button select Brightness.  
Selecting Sound Mode:  
• Press “ ” button to increase Brightness.  
• Press “ ” button to decrease Brightness.  
You can choose MONO, STEREO or DUAL I-II mode, only if  
the selected channel supports that mode.  
• Using “  
“ or “  
” button select Sound Mode.  
• Press “ ” or “ ” button to change Sound Mode.  
• If the TV channel you are watching broadcasts in two lan-  
guages (e.g. Eurosport), you can select the dubbed or the  
original language.  
• When the stereo broadcast is received poorly, you can  
change from stereo to mono sound so that you can hear  
the broadcast more clearly and easily.  
Setting Contrast:  
You can change Contrast only when Picture Mode is select-  
ed MANUAL.  
• Using “  
“ or “  
” button select Contrast.  
• Press “ ” button to increase Contrast level.  
• Press “ ” button to decrease Contrast level.  
Hyper Sound:  
You can use this feature to switch on or off Hyper Sound.  
Pressing “ ” or “ ” button will turn on or off this feature. If the  
current sound system is MONO and the Hyper Sound is set  
ON, then the sound will be heard as if it is STEREO. If the  
current sound system is STEREO, switching Hyper Sound  
on will make the sound deeper. Switching it off will make no  
change in MONO and STEREO.  
Setting Colour:  
You can change Colour only when Picture Mode is selected  
MANUAL.  
• Using “  
“ or “  
” button select Colour.  
• Press “ ” button to increase Colour level.  
• Press “ ” button to decrease Colour level.  
Hyper Sound can be set On or Off also by GREEN button.  
Picture Menu  
To change picture settings:  
• Press “MENU” button, now you are in main menu. In the  
Setting Sharpness:  
main menu, select PICTURE using “  
“ or “  
” button,  
then enter the picture menu pressing “ ” or “ ” button.  
• Using “  
“ or “  
” button select Sharpness.  
• Press “ ” button to increase Sharpness level.  
• Press “ ” button to decrease Sharpness level.  
ENGLISH - 7 -  
nel. For example, your TV is 4:3 mode, but the transmis-  
sion of that channel is in 16:9 mode. If you select the AUTO  
mode, the TV is switched to 16:9 mode automatically. If the  
TV is in 4:3 mode and the picture ratio of the channel is  
also 4:3, there will be no affect selecting the picture mode  
to AUTO mode.  
WSS feature is only used in TV and EXT-3 modes. For the  
Zoom selection in EXT-1 and EXT-2 the pin 8 (of Scart) value  
is used. In RGB mode the Zoom can be “AUTO”, “4:3” and  
16:9” mode.  
Setting Hue (In AV mode only) :  
• Using “ “ or “ ” button select Hue.  
• Press “ ” button to increase Hue level.  
• Press “ ” button to decrease Hue level.  
Hue adjust is functional only when NTSC 3.58/4.43 is applied  
in AV mode. It does not appear when other colour systems  
used.  
Setting VCR Mode (In AV mode only) :  
Zoom can be set to desired mode by RED button.  
Feature Menu  
• Using “  
“ or “  
” button select VCR MODE.  
• When you watch a picture from your VCR and the picture is  
unstable, you may improve it by changing the "VCR MODE"  
setting from "ON" to "OFF".  
• Press “MENU” button, now you are in main menu. In the  
main menu, select FEATURE, using “  
“ or “  
” button.  
Then enter the feature menu pressing “ ” or “ ” button.  
Picture Mode  
Sleep Timer  
This item is used to change the picture mode. By pressing  
“ ” or “ ” button you may choose one of these options:  
BRIGHT, STANDARD, SOFT, MANUAL.  
The sleep timer is used to turn the TV off after a defined peri-  
od. Press “ ” or “ ” button to choose a period of time after  
selecting this item. The timer can be programmed between  
Off and 120 minutes in steps of 10 minutes. (OFF, 010, 020,  
030, 040, ......... ,120.)  
If sleep timer is activated, at the end of the selected the time,  
the TV goes automatically to stand-by mode.  
Colour Temp  
This item is used to change the Colour Temperature. By  
pressing “ ” or “ ” button you may choose one of these op-  
tions: COOL, WARM, NORMAL.  
Child lock:  
You can disable the control panel buttons (except the POW-  
ER button) with this item.  
Press “ ” or “ ” button to change the setting to On or Off after  
selecting this item.  
When you set this item to On, the TV can be operated only  
by using the remote control handset.  
Zoom  
This item is used to change the picture size. By pressing “ ”  
or “ ” button you may choose one of these options: “AUTO”,  
4:3” and “16:9”.  
4:3 This option forces the picture ratio to 4:3 mode.  
Warning: If Child Lock item is set to ON, the TV can not be  
operated by VCR.  
16:9 This option forces the picture ratio to 16:9 mode.  
AUTO This allows to change the picture mode automati-  
cally, according to the transmission of the selected chan-  
ENGLISH - 8 -  
1. PROGRAMME will be the first selected item as you enter  
the INSTALL menu. Pressing “ ” or “ ” button select the  
programme number where you want to the tuned channel  
to be stored. (You may also type the programme number  
using the digit buttons)  
Language:  
Menu Language can be selected by pressing “ ” or “ ” button  
on Language item.  
Note:  
• Do not use PROGRAMME item when you modify the cur-  
rent programme number’s setting. If you select other  
programme number by mistake, the selected programme  
number’s setting will be changed.  
Setting External Source Output  
2. Press “  
” or “  
” button to select BAND. Using “ ” or  
• You can use this menu to select the internal or external  
source that will be output at EXT.2 terminal.  
• In the “FEATURE” menu select “EXT-2 OUTPUT” using  
“ ” button to select the band in which you want to search  
a channel.  
3. Press “  
” or “  
” button to select SEARCH. Press  
“ or “  
” button. Then select the source you want to  
“ ” or “ ” button to start searching. (Press “ ” button to  
search forward. Press “ ” to search backwards.)  
be output at EXT.2 pressing “ ” or “ ” button (one of the  
sources: TV, EXT-1 or EXT-3 (Front AV).  
• If the found channel is not the desired one, press “ ” or  
“ ” button to start searching again.  
• To stop searching before a channel is found, press the  
reverse direction button. For example, when the TV is  
searching forward with “ ” button, press “ ” button to  
stop searching.  
Blue Background During No-Signal  
• If you know the channel number which you want to find,  
you can find the channel directly. Follow the step 4 to  
The Blue Background feature can be set by “ ” or “ ” button  
to either ON or OFF.  
select the correct standard, then press “  
” or “  
to select CHANNEL again, and press “ ” or “ ” button to  
select the channel number, or enter the number with the  
digit buttons.  
4. If the sound or picture is abnormal, change the standard  
(broadcasting system) of new channel. Press “  
” button to select STANDARD, then press “ ” or “ ”  
button to change the correct one.  
” or  
Install (Installation) Menu  
• The indicated number will be changed when you change  
the standard.  
You can store a channel manually, or modify the current set-  
tings of a channel (for example, fine-tuning a channel).  
B/G : C02-C12, C21-C73 / S01-S41 / S75-S79  
D/K : 01-C12, C21-C69 / S01-S19, S22-S41  
You can also changing the colour system, or change the  
DECODER(EXT-2) setting.  
L
: C01-C73 / S01-S41 / S75-S77  
: C04-C09  
• Press “MENU” button to display the main menu.  
L’  
• Press “  
” or “  
” button to select “INSTALL” item.  
5. If the picture is not clear or no colour appears, change the  
colour system to display the picture normally. Press  
Then “ ” or “ ” button to display the “INSTALL” menu.  
” or “  
” button to select COLOUR SYSTEM, then  
press “ ” or “ ” button to choose the correct one.  
• In TV mode: PAL / SECAM  
• InAV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43  
6. If the channel reception is poor, fine-tune the channel.  
Press “  
” or “  
” to select FINE TUNING, then press  
“ ” or “ ” button to fine-tune the channel.  
Note:  
7. After the all settings are completed, store the new  
channel’s setting to the programme number which you se-  
• If you want to modify the current settings of a channel, se-  
lect the channel of which you want to modify the setting.  
Then display the main menu on screen.  
lected. Press “  
” or “  
” to select STORE, then  
press “ ” or “ ” button to store it. “T-V LINK” menu will ap-  
pear after the TV stores the settings.  
• In AV mode, you can change only the “COLOUR SYSTEM”  
item.  
ENGLISH - 9 -  
8. If you do not have a T-V LINK compatible VCR, press  
Note:  
STANDARD” button to exit the menu.  
You can only use this item if you have a decoder connected  
to a T-V LINK compatible VCR to EXT.2 terminal. Setting  
this item to “ON” by mistake causes the picture/sound of a  
TV channel you are currently viewing to disappear.  
If you have a T-V LINK compatible VCR connected to the  
EXT.2 terminal, press “  
” button to display “T-V LINK”  
menu. Then follow the operating procedure “Downloading  
the data to VCR” on page 5 to transmit the Programme  
table data to the VCR.  
If this item has been set to “ON” but the TV channel cannot  
be unscrambled, check the following:  
• Has the decoder been connected to the VCR properly ac-  
cording to the VCR and Decoder instruction manuals?  
To change the Colour system:  
If the picture is not clear or no colour appears, choose the  
correct colour system to display the picture normally.  
• Can the TV channel be unscrambled with a decoder?  
• Do you need to change the VCR settings in order to con-  
nect the decoder? Confirm that the VCR is set properly by  
rechecking the VCR instruction manual.  
1. Press “  
” or “  
” button to select COLOUR SYS-  
TEM, then press “ ” or “ ” button to choose the correct  
one.  
Program (Programming) Menu  
• In TV mode: PAL / SECAM  
You can use the Program (Programming) menu to delete a  
channel, to change the programme number of a channel, to  
give a channel name to a channel, and to start the AUTO  
PROGRAM (AUTOSTORE) function.  
• InAV mode: AUTO / PAL / SECAM / NTSC 3.58 / NTSC 4.43  
2. Press “  
” or “  
” to select STORE, then press “ ” or  
“ ” button to store it.  
3. When “T-V LINK” menu appears, follow the step 4.  
• Press “MENU” button to display the main menu.  
• Press “  
” or “  
” button to select “PROGRAM” item,  
then “ ” or “ ” button to display the “PROGRAM” menu.  
4. If you do not have a T-V LINK compatible VCR, press  
STANDARD” button to exit the menu.  
If you have a T-V LINK compatible VCR connected to the  
EXT.2 terminal, follow the operating procedure “Down-  
loading the data to VCR” on page 5 to transmit the  
Programme table data to the VCR.  
Decoder(EXT-2)  
If you have a decoder connected to a T-V LINK compatible  
VCR, which in turn is connected to the EXT.2 terminal, use  
DECODER(EXT-2) to unscramble the scrambled TV chan-  
nels.  
To choose a channel in the PROGRAM menu:  
• Press “  
” / “  
”/ “ ” / “ ” button. The programme num-  
ber that you choose is high-lighted in the PROGRAM menu  
and you can view the picture of that channel.  
1. Exit the menu.  
2. Turn on the decoder power.  
Caution:  
3. Display the scrambled TV channel on the TV. Even if the  
decoder is working, a scrambled picture appears.  
Using “DELETE” or “INSERT” function rewrite the current  
channel list in the PROGRAM menu. Therefore, the pro-  
gramme numbers of some of channels will change.  
4. Display the “INSTALL” menu again.  
5. Press “  
” or “  
” button to select DECODER(EXT-2),  
When you complete the settings of PROGRAM  
menu:  
then press “ ” or “ ” button to set to “ON”  
6. Press “  
” or “  
” to select STORE, then press “ ” or  
If you have a T-V LINK compatible VCR, press the “  
” but-  
“ ” button to store it. “T-V LINK” menu will appear after the  
TV stores the setting.  
ton to display the T-V LINK menu. Then follow the operating  
procedure “Downloading the data to VCR” on page 5 to  
transmit the Programme table data to the VCR.  
7. Follow the operating procedure “Downloading the data  
to VCR” on page 5 to transmit the revised programme  
table data to the VCR.  
If you do not have a T-V LINK compatible VCR, press “ STAN-  
DARD” button to exit the menu.  
• If you do not want to transmit, press “STANDARD” but-  
ton to exit the menu.  
ENGLISH - 10 -  
To give a channel name (NAME):  
Other Features  
1. Choose the channel you want to give a channel name.  
2. Press the RED button to enter the NAME mode.  
Sound Mute  
3. Press “ ” or “ ” button to choose the position, and press  
To cut off the sound of the TV, press “  
will be cut off. To cancel mute, press “  
ton. The volume level will be the same as the level before  
mute when you cancel mute.  
” button. The sound  
” or “ ” or “ ” but-  
” or “  
” button to choose each character of chan-  
nel name.  
4. Press the RED button to store the channel name.  
TocanceltheNAMEmode,presstheBLUEbutton.  
Information on Screen  
To delete a channel (DELETE):  
First pressing the “ ” button displays the current status  
Programme number”, “Station name” and “Sound sta-  
tus”.  
1. Choose the channel you want to delete.  
2. Press the YELLOW button to enter the DELETE mode.  
3. Press the YELLOW button to delete it.  
Pressing this button again displays the current time.  
TocancelthisDELETEmode,presstheBLUEbutton.  
Pressing this button once more remove the on-screen dis-  
play.  
To change the programme number of a channel  
(INSERT):  
To Display the Time  
1. Choose the channel you want to change the programme  
• While watching a TV programme with Teletext transmission  
number.  
press “ “ button twice. The current time information, cap-  
turedfromTeletextwillbedisplayedattheupperleftcorner  
of the screen.  
2. Press the GREEN button to enter the INSERT mode.  
3. Press “  
” / “  
” / “ ” / “ ” button to choose new  
programme number.  
• If the programme being watched does not have Teletext  
transmission, no time information will be displayed.  
4. Press the GREEN button to insert the channel to the cho-  
sen programme number.  
• The time information will disappear after pressing “ “ but-  
ton again.  
TocancelthisINSERT mode,presstheBLUEbutton.  
To start Auto Program (AUTOSTORE)  
Picture Mode  
AUTO PROGRAM automatically programmes the received  
channels in your TV’s programme numbers.  
You can change Picture Mode settings by pressing “STAN-  
DARD” button when no menu appears.  
1. Press the BLUE button to enter the AUTOSTORE mode.  
A warning message appears.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the orig-  
inal remote control button of a device makes the function  
work in the same way as the original remote control.  
Press the VCR Control Button to control your VCR.  
Note:  
• If your device is not made by JVC, these buttons cannot be  
used.  
• To cancel the AUTOSTORE mode, press the “STAN-  
DARD” button.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
2. Press “  
” or “  
” button to choose the “COUNTRY”,  
then press “ ” or “ ” button the choose country you are  
now located.  
• You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
3. Press “  
” or “  
” button to choose the “CONTINUE”,  
then press “ ” button to start AUTO PROGRAM The fol-  
lowing message appears.  
• To cancel the AUTO PROGRAM, press the “STAN-  
DARD” button.  
4. After AUTO PROGRAM is finalized, the PROGRAM menu  
appears again.  
ENGLISH - 11 -  
To Reveal “concealed” Information  
Teletext  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
No on screen display will be available in text mode.  
To Stop Automatic Page Change  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
To operate Teletext  
• Press “ “ button to stop the automatic page change.  
• Select a TV station on which Teletext is being transmitted.  
• Press “ “ button again to allow the next page to be dis-  
played.  
• Press (teletext) “ ” button. Usually the list of contents (in-  
dex) is displayed on the screen.  
To Select a Subcode Page  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
SelecttherequiredTeletextpage.  
• Press “ “ button.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
time, press “ “ button. TV programme will be displayed on  
the screen.  
To select a page of Teletext  
PresstheappropriatedigitbuttonsfortherequiredTeletext  
page number.  
• Teletext page number will be displayed on the upper left  
corner of the screen when the selected page is found.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
• Press “ buttontodisplaytheselectedTeletextpage.  
To exit Teletext  
• Press “  
“ button to move the Teletext screen forward  
• Press “ ” button. The screen will switch to TV mode.  
Fastext and Toptext  
one page at a time.  
• Press “  
button tomovetheTeletextscreenbackward  
one page at a time.  
Teletextmodewillbeselectedaccordingtotransmissionau-  
tomatically.  
Your CTV supports the 7 page Teletext system. When the  
page number of any of the 7 pages in memory is entered, the  
system will not search for the requested page; instead it will  
display the page automatically.  
• Press “  
“ button to move the Teletext screen forward  
one page at a time.  
To Select Index Page  
• Press “  
one page at a time.  
button tomovetheTeletextscreenbackward  
• To select the page number of the index (generally page  
100), press “ “ button.  
For Fastext and Toptext  
Searching for a teletext page while watching TV  
The subject-heading for the information may have a particular  
colour or can be in a form located in a coloured box.  
• In the Teletext mode pressing “  
“ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit buttons. As you enter last digit of page num-  
ber, “ ” sign will replace the page number and flash until  
• Press an appropriate RED, GREEN, YELLOW or BLUE but-  
ton in order to reach the relevant page quickly.  
the entered page number is found. Then the page number For TOPTEXT  
will replace “ ” sign again. Now you can display this tele-  
text page pressing “ “ button.  
If Toptext transmission is present, colour coded buttons will  
appear in status row.  
IfToptext transmission is not present, status row will not ap-  
pear.  
To Select Double Height Text  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
InToptextmodethe“  
“ or “  
” commands will request  
the next or previous page respectively. If Toptext transmis-  
sion is not available, in case of operation of these com-  
mands, wraparound occurs. For example page 100 appears  
to be one greater than page 199.  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
• Press “ “ button once more for the full page of normal  
height text.  
ENGLISH - 12 -  
Copy Facility  
Connect the External Equipments  
You can output the video and audio signals which inputs from  
TV or EXT.1 (EXT-1) terminal to the video recorder connected  
to the EXT.2 (EXT-2) terminal.  
Via the Euroconnector  
Your TV set has two Euroconnector sockets. If you want to  
connect equipments (e.g. video recorder, decoder, etc.)  
which have Euroconnectors, to your TV, use the EXT.1  
(EXT-1) or EXT.2 (EXT-2) terminals.  
• To select the output source, see “ Setting External Source  
Output” on page 9.  
Connecting Headphones  
If an external device is connected via Euroconnector sockets  
TV is switched to AV mode automatically.  
Use the stereo headphone socket of your TV, to connect  
headphones.  
T-V LINK compatible VCR  
Be sure to connect the T-V LINK compatible VCR to the  
EXT-2 terminal. If not, the T-V LINK function will not work  
properly.  
• When connecting a T-V LINK compatible VCR to the EXT-2  
terminal, be sure to connect the decoder to the VCR. If not,  
the T-V LINK function may not work properly. And then set  
the DECODER(EXT-2) function for the channel to ON to un-  
scramble a scrambled channel. For details, see  
Decoder(EXT-2)” on page 10.  
RGB mode  
If an equipment can output the RGB signals, connect it to  
the EXT.1 (EXT-1) terminal.  
EXT-2S Mode  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting EXT-2S mode and connecting your  
equipment to the EXT.2 (EXT-2S) terminal of TV. See your  
equipment's booklet to check if your equipment has such  
feature.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the Front AV (EXT-3) terminal  
with the video and audio cables.  
• If the equipment has the mono audio jack, connect it to the  
AUDIO-L jack.  
Via the ANT (aerial) socket  
If your equipment does not have an Euroconnector or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
• To store the test signal that comes from the equipment,  
see “INSTALL Menu” on page 9 and store it to the pro-  
gramme number 0. You can watch images from that equip-  
ment to select the programme number which you stored the  
test signal.  
TV and Video Recorder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
• Connect the Video Recorder to the EXT.1 (EXT-1) or EXT.2  
(EXT-2) terminal with the SCART cable, or connect it to the  
Front AV (EXT-3) terminal with the audio and video cables.  
NTSC Playback  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
ENGLISH - 13 -  
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing "AV" button on the remote control selects one of AV modes (EXT-1, RGB, EXT-2, EXT-2S and EXT-3).  
Toreturntothe TV mode, repeatedly press “AV” button.  
EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio L/R inputs and RGB inputs are available.  
• TV broadcast outputs (Video and Audio L/R) are available.  
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
• Video and Audio L/R outputs are available. (See “Setting External Source Output” on page 9.)  
• T-V LINK functions are available. (See “ T-V LINK compatible VCR” on page 13.)  
EXT.3 (EXT-3) (Front AV) terminal: RCA connectors x 3  
• Video input and Audio L/R inputs are available.  
ENGLISH - 14 -  
Tips  
Specifications  
Care of the Screen  
TV BROADCASTING  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coat-  
ing layer.  
PAL SECAM B/G D/K L/L’  
RECEIVING CHANNELS  
VHF (BANDI/III)  
Poor Picture  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
UHF (BAND U)  
HYPERBAND  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
CABLE-TV (B/G: S01-S41 / S75-S79  
D/K: S01-S19, S22-S41  
L: S01-S41 / S75-S77)  
NUMBER OF PRESET CHANNELS  
100  
No Picture  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
CHANNEL INDICATOR  
ON SCREEN DISPLAY  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct keys on the remote  
control? Try once more.  
RF AERIAL INPUT  
75 Ohm Unbalanced  
Sound  
OPERATING VOLTAGE  
Sound is coming from only one of the speakers. Is the bal-  
ance set to one direction extreme? See SOUND menu.  
220-240V AC, 50 Hz.  
Remote Control  
SOUND-MULTIPLEX SYSTEMS  
Your TV no longer responds to the remote control. Perhaps  
the batteries are exhausted. If so you can still use the local  
buttons at the right side of your TV.  
Have you selected the wrong menu? Press “STANDARD”  
button to return to TV mode or press “MENU” button to return  
to the previous menu.  
German + Nicam Stereo  
PICTURE TUBE  
28” 4:3  
AUDIO OUTPUT POWER (WRMS.) (%10 THD)  
No solution  
2 x 10  
Switch your TV set off and on. If this does not work, call the  
service personnel; never attempt to repair it yourself.  
POWER CONSUMPTION (W) (max)  
120 Watt  
DIMENSIONS (WxHxD) (mm)  
ENGLISH - 15 -  

Lindy 20689 User Manual
Miele HGE 60 User Manual
Miro Displays Computer Monitor TD271 User Manual
NEC EXPRESS5800 N8403 019 User Manual
Panasonic NN C2000W User Manual
Panasonic TC 1420T User Manual
Philips 21PT6146 User Manual
Philips 28PW6332 User Manual
Philips 196V3L User Manual
Philips Brilliance 190P5EG User Manual