JVC AV 21V311 AV 21V511 AV 21V531 AV 25V311 AV 25V511 AV 29V311 AV 29V511 AV 29V531 User Manual |
Contents
s
2
3
3
3
4
5
5
6
Safety precaution
Preparation
..
1 Confirm which remote control you have
2 Insert the batteries into the remote control
..
COLOUR TELEVISION
..................
..........................
......
3 Connecting the aerial and VCR
4 Connecting other devices
INSTRUCTIONS
5 Connect the power cord to the AC outlet
..............................................
6 SETUP TOUR
Thank you for buying this JVC
colour television.
Basic operation
Remote control buttons and functions
MUTING button
7
8
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
.............................................
8
..................................................
BASS button
8
...............................
.............................
SOUND SYSTEM button
8
COLOUR SYSTEM button
8
.............................................
DISPLAY button
8
........................
CINEMA SURROUND button
9
.....................................
AV-21V311
AV-21V511
AV-21V531
AV-25V311
AV-25V511
AV-29V311
AV-29V511
AV-29V531
ECO SENSOR button
9
...........................................
button
10
10
10
10
11
11
11
...............................
PICTURE MODE button
.....................................................
button
.......................................
OFF TIMER button
..............................
CHANNEL SCAN button
...................................
FAVORITE CH button
........................................
RETURN + button
Using the TV’s menus
............................................
12
Basic operation
12
13
13
13
13
14
14
14
15
15
15
16
17
17
17
17
18
18
18
19
19
19
...........................................................
INPUT
...............................................
PICTURE TILT
...............................................................
VNR
........................................
..........................................
COMPRESS (16:9)
AUTO SHUTOFF
.................................................
..................................................
................................................
..................................................
CHILD LOCK
BLUE BACK
VIDEO-2 SET
LANGUAGE
.......................................
AUTO CH PRESET
..................................
MANUAL CH PRESET
..............................................................
SKIP
...............................................
SETUP TOUR
Picture Adjustments
Sound Adjustments
....................................
.....................................
..................................................
AI VOLUME
................................................
FAVORITE CH SETTING
SUPER BASS
...............................
...........................................
..........................................
..........................................
VIDEO SETTING
AI ECO SENSOR
AI ECO DISPLAY
Attaching the Twin Port Bass Blaster Unit 20
TV buttons and parts
Using the buttons on the TV
Troubleshooting
21
22
23
24
Specifications
GGT0015-001C-H
1003-NIC-JMT
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Preparation
1 Confirm which remote control you have
Your TV comes with one of the three remote controls shown below. Functions you
can operate differ depending on the type of remote control.
<RM-C1303>
For TV model:
AV-21V511
AV-25V511
AV-29V511
<RM-C1305>
For TV model:
AV-21V311
AV-25V311
AV-29V311
<RM-C1307>
For TV model:
AV-21V531
AV-29V531
POWER
POWER
POWER
MUTING
MUTING
MUTING BASS
SYSTEM
SYSTEM
CINEMA
SYSTEM
CINEMA
CINEMA
COLOUR SOUND SURROUND
COLOUR SOUND SURROUND
COLOUR SOUND SURROUND
ECO
ECO
ECO
SENSOR
SENSOR
SENSOR
DISPLAY
DISPLAY
DISPLAY
MENU
MENU
MENU
Ι/ΙΙ
Ι/
ΙΙ
Ι/ΙΙ
TV/VIDEO
TV/VIDEO
TV/VIDEO
1
4
2
5
8
0
3
6
9
1
4
2
5
8
0
3
6
9
1
4
2
5
8
0
3
6
9
OFF
OFF
OFF
TIMER
TIMER
TIMER
PICTURE
MODE
PICTURE
MODE
PICTURE
MODE
7
7
7
CHANNEL
SCAN
CHANNEL
SCAN
CHANNEL
SCAN
+
+
+
RETURN
RETURN
RETURN
- --
/
- --
/
- --
/
CHANNEL
VOLUME
CHANNEL
VOLUME
CHANNEL
VOLUME
RM-C1305
RM-C1303
RM-C1307
TV
TV
TV
2 Insert the batteries into the remote control
Correctly insert two batteries, observing the and
,
.
polarities and inserting the end first.
.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3 Connecting the aerial and VCR
• Read the manuals provided with the devices. Depending on the device, the connection
method may be different from the diagrams. Also the device settings may need to change
depending on the connection method.
• Turn off all the devices including the TV.
• Connecting cables are not supplied.
• When connecting monaural audio to the TV, use the L/MONO jack.
• You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector
with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C
signal). In that case, do not connect it to the TV with a video cable.
• If you connect the VCR to the TV only with an aerial cable, you should preset the video
channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH
PRESET” on page 16 and preset it manually.
Connecting the aerial
VHF/UHF outdoor aerial
(1)
Matching
aerial
adapter
(supplied)
COMPONENT
VIDEO-1
(
)
VIDEO-2
INPUT
OUTPUT
(2)
(3)
INPUT
S
OVER
V
Y
C
V
L
/V
B
L
L
/MONO
/ MONO
R
C
R
R
R
Connecting the aerial and VCR
VHF/UHF outdoor aerial
COMPONENT
VIDEO-1
INPUT
(
)
VIDEO-2
INPUT
OUTPUT
S
OVER
V
L
Y
C
V
L
/V
B
3
L
/MONO
/ MONO
R
C
R
R
R
2
To video
output
To audio
output
To RF
output
To S-video
output
1
VCR
To aerial input
4
Preparation
4 Connecting other devices
If you are not connecting any other devices, skip step 4 and perform step 5.
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
• The OUTPUT terminal outputs the video and sound signals which you are viewing on the
TV. You can dub them onto the VCR connected to the OUTPUT terminal.
(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it
cannot output any signals when the TV is turned off.)
• Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player,
to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 15.)
• The following illustrations are for the AV-21V311/AV-21V511/AV-21V531/AV-25V311/
AV-25V511. Your TV’s front and rear panels may not look exactly like the illustrations.
Front
Camcorder or TV game
Headphones
Rear
COMPONENT
VIDEO-1
(
)
VIDEO-2
INPUT
OUTPUT
INPUT
VCR (for playing)
S
DVD player
(composite signals)
OVER
V
Y
V
L
/V
V
L
C
B
L
/ MONO
/ MONO
VCR (for recording)
R
C
R
R
R
R
DVD player
(component video signals)
5 Connect the power cord to the AC outlet
Operate only from the power source indicated on the rear of the TV.
5
Preparation
6 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo
is displayed. Follow the instructions on the on-screen display to perform the SETUP
TOUR.
• In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET
function on the “MENU 3” menu. For details, see page 15.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the
TV automatically switches to the
language setting mode.
POWER lamp
Main power button
SYSTEM
CINEMA
SETUP TOUR
COLOUR SOUND SURROUND
ECO
SENSOR
DISPLAY
DISPLAY
button
2 Press the CHANNEL –/+ or
MENU t
buttons
/
MENU
the MENU
buttons to
MENU
/
buttons
Ι
/ΙΙ
select the on-screen
language.
TV/VIDEO
1
4
7
2
5
8
0
3
6
9
OFF
SETUP TOUR
TIMER
PICTURE
MODE
LANGUAGE
ENGLISH
CHANNEL
SCAN
RETURN+
- --
/
NEXT
CHANNEL
VOLUME
EXIT BY
OPERATE BY -+
DISPLAY
CHANNEL –/+
buttons
3 The AUTO PROGRAMMING
function will start and the
indicator blinks.
• If a TV channel you want to view is not
set to the channel, set it with the
MANUAL CH PRESET function. For
details, see page 16.
SETUP TOUR
NOW PROGRAMMING
4 Upon the completion of
AUTO PROGRAMMING
function, the message below is
displayed.
STOP BY -+
• To stop the AUTO PROGRAMMING
function, press the CHANNEL m or
the MENU
/
buttons.
SETUP TOUR
When all the TV channels that can
be received on your TV have been
preset, the display goes out and the
AUTO PROGRAMMING function
operation is completed.
THANK YOU!
6
Basic operation
The illustration below is for the
remote control unit RM-C1307.
Your remote control may not look
exactly like the illustration.
1 Press the POWER button to
turn your TV on.
• If your TV does not turn on, press the
Main power button on the TV, then
press the POWER button again.
• You can also turn on your TV by
pressing any of the following buttons;
- the CHANNEL m button
- the Number buttons
POWER
MUTING BASS
SYSTEM
CINEMA
- the TV/VIDEO button
COLOUR SOUND SURROUND
ECO
2 Select a channel.
SENSOR
DISPLAY
■ Press the CHANNEL m button.
• Up/down selection cannot be selected
for channels to which the SKIP has
been set to “YES”. See page 17.
MENU
Ι/ΙΙ
■ Press the Number buttons to enter
TV/VIDEO
the channel number.
1
4
2
5
8
0
3
6
9
OFF
TIMER
• If you want to enter a two-digit
number, press the -/-- button to select
the two digit mode “--”, then enter the
channel number.
PICTURE
MODE
7
CHANNEL
SCAN
+
RETURN
- --
/
3 Press the VOLUME –/+ button
to adjust the sound.
CHANNEL
VOLUME
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the
main power off if you do not plan to use
your TV for a long time or if you wish
to save energy.
RM-C1307
TV
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see
page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to
select another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to
select the VIDEO mode. For details, refer to
page 13.
7
Remote control buttons and functions
MUTING button
COLOUR SYSTEM button
You can turn the sound off instantly.
If the picture is not clear or no colour
appears, change the current colour
system to another colour system.
Press this button.
To turn the sound on, press this button
again.
Press this button to select the colour
system.
In TV mode:
BASS button
<AV-21V531/AV-29V531 only>
<AV-21V311/AV-25V311/AV-29V311 only>
SECAM
AUTO
PAL
You can enjoy a powerful bass sound by
using the BASS (Bass Reflex) function.
<Other models>
Press this button to turn the BASS
function on or off.
SECAM
AUTO
PAL
NTSC4.43
NTSC3.58
• To use this function, you must first mount
the Twin Port Bass Blaster Unit packaged
with the TV on top of the TV. For details, see
page 20.
In VIDEO mode:
SECAM
NTSC3.58
AUTO
PAL
NTSC4.43
AUTO:
SOUND SYSTEM button
Automatic colour system selection.
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
Press this button to select the sound
system.
DISPLAY button
You can continuously display the current
channel number or VIDEO mode on the
screen.
<AV-21V311/AV-25V311/AV-29V311 only>
B/G
Press this button.
<Other models>
To turn the display off, press this button
again.
I
B/G
D/K
M
• You cannot select any sound system when
in a VIDEO mode.
• When selecting a VIDEO mode with no
signal, indication of the VIDEO mode
becomes fixed on the screen.
8
Remote control buttons and functions
CINEMA SURROUND button
ECO SENSOR button
You can enjoy an enhanced sound for a
wider audience by using CINEMA
SURROUND function.
You can adjust this TV so that the screen
automatically adjusts to the optimum
contrast according to the brightness of
your room. This function reduces eye
strain and the power consumption of
this TV.
Press this button to select one of the
CINEMA SURROUND mode.
HIGH/LOW:
Press this button to select the desired
mode.
When you listen to the stereo sound,
please select HIGH mode or LOW mode.
You can enjoy the sound for a wider
audience similar to the experience at the
theatre.
AI ECO SENSOR 1:
The AI ECO SENSOR function switches
on.
• In case that you setting up the CINEMA
SURROUND function to HIGH mode, there
may be slight volume distortion. In case that
occurs, please switch the HIGH mode to
LOW mode, the effect of CINEMA
SURROUND functions will be less
noticeable, however, the volume distortion
will be corrected.
Usually, it is recommended to watch the
TV in this mode.
AI ECO SENSOR 2:
The AI ECO SENSOR function switches
on.
If you feel the screen in the “AI ECO
SENSOR 1” mode is too dark, select this
mode.
MONO SURROUND:
Select the MONO SURROUND mode,
when you listen to the mono sound.
You can enjoy the sound for a wider
audience similar to stereo sound.
AI ECO SENSOR OFF:
The AI ECO SENSOR function switches
off.
• You can display on the screen the effect of
the AI ECO SENSOR function.
For details, see “AI ECO DISPLAY” on
page 19.
OFF:
The CINEMA SURROUND function
swiches off.
9
Remote control buttons and functions
button
button
<AV-21V511/AV-21V531/AV-25V511/
<AV-21V311/AV-25V311/AV-29V311 only>
AV-29V511/AV-29V531 only>
You can select one of the two bilingual
sounds in an A2 Sound-multiplex
programme’s bilingual programme.
You can select a sound setting for stereo
broadcast programmes and bilingual
programmes.
Press this button to select a bilingual
sound.
Press this button to select a sound
setting.
: Bilingual I sound
: Bilingual II sound
: Stereo sound
: Bilingual I (sub I) sound
: Bilingual II (sub II) sound
: Monaural sound
• The A2 Bilingual function has no effect on
stereo programmes of the A2 Sound-
multiplex broadcast programme type,
although an A2 Bilingual function indicator
will appear on the screen.
MONO : Cancels the multi-sound
function, and the sound
becomes monaural.
• If you have poor reception of a stereo
broadcast, you can change from stereo
• The A2 Bilingual function has no effect on
programmes other than A2 Sound-multiplex
broadcast programme type, although an A2
Bilingual function indicator will appear on
the screen.
sound (
) to monaural sound ( ) so that
you can hear the broadcast more clearly and
easily.
• The A2 Bilingual function has no effect in
VIDEO mode, although an A2 Bilingual
function indicator will appear on the screen.
• If the multi-sound function cannot work
normally due to poor signal quality, noise
may be included in the sound, or the sound
may change many times. If this happens,
change the sound setting to MONO mode to
cancel the multi-sound function.
OFF TIMER button
You can set the TV to automatically turn
off after a set time.
Press this button to select the period
of time.
PICTURE MODE button
You can select one of three picture
adjustment settings as you like.
• You can set the period of time to a
maximum of 120 minutes in 10 miniute
increments.
Press this button to select a mode.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
BRIGHT:
Heightens contrast and sharpness.
To display the remaining time, press this
button once.
STANDARD:
To cancel the OFF TIMER function, press
this button to set the period of time to
“0”.
Standardizes picture adjustments.
SOFT:
Softens contrast and sharpness.
• The OFF TIMER function will not turn off
the TV’s main power.
• Pressing this button returns all the picture
settings in “MENU 4” to their default
settings.
10
Remote control buttons and functions
CHANNEL SCAN button
RETURN + button
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
You can set a channel you frequently
view to the Return Channel and you can
view that channel at any time with
one-touch.
1 Press this button to start scanning
TV channels.
To set the channel to the Return
Channel:
The TV channel programmes are each
displayed for several seconds.
• The programmes of TV channels for
which the SKIP function is set to “YES”
are not displayed.
1 Select the channel you want to set
to the Return Channel.
2 Press this button and hold until the
message “RETURN PLUS
PROGRAMMED!” appears.
2 When you find the programme you
want to view, press this button
again to stop scanning.
• When you turn off the TV, the Return
Channel setting is canceled.
To view the Return Channel:
FAVORITE CH button
Press this button.
You can correlate 4 channels out of 99
channels (PR01-PR99) with FAVORITE
CH buttons RED, GREEN, YELLOW and
BLUE.
When not in TEXT mode, press one of
the FAVORITE CH buttons for more than
3 seconds to correlate currently
watching channel. After the channel and
button are correlated, you can directly
select favorite channel by the correlated
button.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
To cancel the Return Channel setting:
Press this button and hold until the
message “RETURN PLUS CANCELED!”
appears.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
• When MENU is displayed, FAVORITE CH
cannot be correlated.
• Correlation of FAVORITE CH button and the
channel cannot be reset eventhough the
main power is turned off.
11
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your
TV’s functions fully, you need to understand how to use the menus.
2 Repeatedly press the
MENU T buttons to display a
SYSTEM
CINEMA
desired menu.
COLOUR SOUND SURROUND
ECO
• If you hold down the y button, the next
menu is displayed.
SENSOR
DISPLAY
DISPLAY
button
MENU t
buttons
• If the selected function is on the first
line, pressing the r button displays the
preceding menu.
MENU
MENU
/
buttons
Ι/ΙΙ
TV/VIDEO
1
4
7
2
5
8
0
3
6
9
OFF
3 Repeatedly press the
MENU T buttons to select a
desired function.
TIMER
PICTURE
MODE
CHANNEL
SCAN
RETURN+
- --
/
4 Press the CHANNEL –/+ or the
CHANNEL
VOLUME
/
MENU
buttons to change
CHANNEL –/+
buttons
function settings.
Example:
Changes the AUTO
SHUTOFF setting.
■ Basic operation
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
OFF
OFF
ON
1 Press the MENU T buttons.
VIDEO-2 SET COMPONENT
VIDEO-2 SET COMPONENT
⇔
One of the 6 menus is displayed.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
MENU number
• With some functions, the operation
method may differ.
MENU
1
INPUT
VNR
TV
ON
ON
00
The icon on the
left indicates the
currently selected
function.
COMPRESS(16:9)
PICTURE TILT
5 Press the DISPLAY button to
turn the display off.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
•To operate a menu using the buttons
on the front panel of the TV, refer to
“Operating menus” on page 22.
12
Using the TV’s menus
INPUT
VNR
You can view images from VCRs or other
devices connected to your TV.
You can reduce picture noise.
1 Press MENU T to display the
“MENU 1” menu, then select
“VNR”.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
2 Press CHANNEL –/+ or MENU
/
to select “VIDEO-1”, “VIDEO-2” or
“VIDEO-3”.
TV mode changes to VIDEO mode.
To cancel the VNR function, select
“OFF”.
COMPRESS (16:9)
This function converts a normal picture
(4:3 aspect ratio) into a wide picture
(16:9 aspect ratio).
Use for pictures with a 16:9 aspect ratio
that have been squeezed into a normal
picture (4:3 aspect ratio), to restore their
original dimensions.
PICTURE TILT
<AV-29V311/AV-29V511/AV-29V531 only>
There are cases where the Earth’s
magnetic force may make the picture tilt.
If this happens, you can correct the
picture tilt.
1 Press MENU T to display the
“MENU 1” menu, then select
“PICTURE TILT”.
1 Press MENU T to display the
“MENU 1” menu, then select
“COMPRESS (16:9)”.
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
MENU
1
INPUT
VNR
COMPRESS(16:9)
PICTURE TILT
TV
ON
ON
00
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Continue pressing CHANNEL –/+ or
MENU until the picture
becomes level.
/
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
To cancel the COMPRESS (16:9)
function, select “OFF”.
13
Using the TV’s menus
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
AUTO SHUTOFF
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
To cancel the CHILD LOCK function,
select “OFF”.
• The CHILD LOCK function is canceled
when you turn the power off.
1 Press MENU T to display the
“MENU 2” menu, then select
“AUTO SHUTOFF”.
BLUE BACK
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
If no signal is being received or the
signal is very weak, a blue screen
automatically becomes the picture
background.
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
If you wish to continue viewing the poor
picture, you must set the BLUE BACK
function to “OFF”.
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
To cancel the AUTO SHUTOFF
1 Press MENU T to display the
“MENU 2” menu, then select
“BLUE BACK”.
function, select “OFF”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
• The AUTO SHUTOFF will not work for a
VIDEO mode.
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
CHILD LOCK
You can disable the front control buttons
of the TV.
When this function is set to “ON”, the
TV can be operated using only the
remote control.
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
To cancel the BLUE BACK function,
select “OFF”.
Use this function to prevent children
from operating the TV without parental
consent.
1 Press MENU T to display the
“MENU 2” menu, then select
“CHILD LOCK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
14
Using the TV’s menus
VIDEO-2 SET
AUTO CH PRESET
Set the VIDEO-2 SET correctly according
to the video signal input from the
external device connected to the
You can automatically preset all TV
channels that can be received by your
TV to channels.
VIDEO-2 terminal. If this setting is
incorrect, images will not be displayed.
1 Press MENU T to display the
“MENU 3” menu, then select
“AUTO CH PRESET”.
1 Press MENU T to display the
“MENU 2” menu, then select
“VIDEO-2 SET”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
LANGUAGE
ENGLISH
ON
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
VIDEO-2 SET COMPONENT
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
to start the AUTO CH PRESET
function.
/
2 Set the VIDEO-2 SET according to
the video signal input from the
VIDEO-2 terminal.
“>>>ON SEARCH” is displayed on
the screen.
If a normal video signal (composite
video signal) is input:
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO
CH PRESET function operation is
completed.
Press the CHANNEL –/+ or the
MENU
/
buttons to select “VIDEO”.
If a component video signal
(Y/CB/CR signals) is input:
To stop the AUTO CH PRESET:
Press the CHANNEL –/+ or the
Press the CHANNEL –/+ or the
MENU
/
buttons to select
MENU
/
buttons.
“COMPONENT”.
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
LANGUAGE
You can select the language for the
on-screen display.
• If the TV cannot preset the TV channel
you want to view, preset it manually. For
details, see “MANUAL CH PRESET” on
page 16.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
to select language.
/
The on-screen display indications are
in the selected language.
15
Using the TV’s menus
If the picture is not clear:
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
Fine-tune the TV channel.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
NO
B/G
SELECT BY
PROGRAM BY -+
FINE
PR 1 VL
EXIT BY
BY VOL-+ DISPLAY
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
2
Hold VOLUME m down to fine-tune
the TV channel so that the best
image is displayed on screen.
“>” or “<” indicates that the TV is
fine-tuning the TV channel.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
/
.
The sub-menu is displayed.
If the sound is not clear:
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
1
Press MENU t to select “SOUND
SYSTEM”.
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
2
Press VOLUME m to select the
appropriate sound system.
3 Press CHANNEL –/+ or MENU
to select the channel number.
/
5 Press MENU T to select
4 Press VOLUME M to start
“MANUAL”.
searching for the TV channel.
“>>>” or “<<<” is displayed on the
screen.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
• If the TV channel you want to preset is
not displayed, repeat step 4 until the TV
finds the TV channel you want to preset.
• To stop the MANUAL CH PRESET
function, press any button other than the
VOLUME m button.
16
Using the TV’s menus
SKIP
Picture Adjustments
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons or the CHANNEL SCAN button.
You can adjust the picture as you like.
1 Press MENU T to display the
“MENU 4” menu.
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
MENU
4
TINT
COLOUR
BRIGHT
CONT
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
SHARP
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU
/
to select an item
2 Press CHANNEL –/+ or MENU
/
.
and press CHANNEL –/+ or
The sub-menu is displayed.
MENU
/
to adjust it.
3 Press MENU T to select “SKIP”.
TINT*
– : Reddish + : Greenish
COLOUR
BRIGHT
CONT
– : Lighter
– : Darker
– : Lower
– : Softer
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
B/G
SHARP
SELECT BY
PROGRAM BY -+
PR 1 VL
EXIT BY
YES/NO BY VOL-+ DISPLAY
*TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
4 Press CHANNEL –/+ or MENU
/
to select the channel you want to
skip.
Sound Adjustments
You can adjust the sound as you like.
5 Press VOLUME –/+ to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
1 Press MENU T to display the
“MENU 5” menu.
MENU
5
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
BASS
TREBLE
BALANCE
AI VOLUME
SUPER BASS
ON
ON
SETUP TOUR
You can start the SETUP TOUR function.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU
/
to select an item
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
and press CHANNEL –/+ or
MENU
/
to adjust it.
BASS
TREBLE
BALANCE
– : Weaker
– : Weaker
– : Left
+ : Stronger
+ : Stronger
+ : Right
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
/
.
JVC logo appears and the SETUP
TOUR functon will start.
For details, see page 6.
17
Using the TV’s menus
AI VOLUME
FAVORITE CH SETTING
You can prevent the sudden increase or
decrease of volume that occurs when
changing channels or switching VIDEO
modes.
You can set PICTURE MODE, VNR and
PICTURE EFFECT functions for the
favorite channels using FAVORITE CH
SETTING menu.
1 Press MENU T to display the
“MENU 5” menu, then select
“AI VOLUME”.
1 Press MENU T to display the
“MENU 6“ menu, then select
“FAVORITE CH SETTING”.
MENU
5
MENU
6
BASS
TREBLE
BALANCE
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR
AI ECO DISPLAY
1
ON
AI VOLUME
SUPER BASS
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
2 Press CHANNEL –/+ or MENU
/
/
.
The sub-menu is displayed.
To cancel the AI VOLUME function,
select “OFF”.
FAVORITE CHANNEL :
PR xx
PICTURE MODE : STANDARD
VNR : ON
PICTURE EFFECT : ON
• The AI VOLUME function may not
operate as expected if the sound input
level from a broadcast station (or video
software) is extremely low.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• The AI VOLUME function for TV mode
and VIDEO mode can be set separately.
For example, you can set it to be off in
TV mode and on in VIDEO mode. If you
set the AI VOLUME function while
viewing a TV channel, the setting is
registered as the setting for TV mode. If
you set the AI VOLUME function while
viewing images from a VIDEO terminal,
the setting is registered as the setting for
VIDEO mode.
3 Press CHANNEL –/+ or MENU
to select one of the colours of
“RED”, “GREEN”, “YELLOW” or
“BLUE” assigned to FAVORITE CH
button.
4 Press MENU T to select
“PICTURE MODE”, then press
CHANNEL –/+ or MENU
/
to
select the picture mode of
SUPER BASS
“BRIGHT”, “STANDARD” or
“SOFT”.
You can enjoy a powerful bass sound by
using the SUPER BASS (Bass Reflex)
function.
5 Press MENU T to select “VNR”,
then press CHANNEL –/+ or
1 Press MENU T to display the
“MENU 5” menu, then select
“SUPER BASS”.
MENU
/
to select VNR “ON”
or “OFF”.
MENU
5
6 Press MENU T to select
BASS
TREBLE
BALANCE
“PICTURE EFFECT”, then press
CHANNEL –/+ or MENU
/
to
AI VOLUME
SUPER BASS
ON
ON
select PICTURE EFFECT “ON”
or “OFF”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
• PICTURE MODE and VNR settings are
changed only when you press the
FAVORITE CH button while PICTURE
EFFECT is ON. Otherwise, PICTURE
MODE and VNR are not changed.
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
To cancel the SUPER BASS function,
select “OFF”.
18
Using the TV’s menus
VIDEO SETTING
AI ECO SENSOR
You can set PICTURE MODE, VNR and
PICTURE EFFECT functions for VIDEO
mode using VIDEO SETTING menu.
You can enable this function so that the
brightness of TV screen is automatically
adjusted according to the brightness of
your room.
1 Press MENU T to display the
“MENU 6” menu, then select
“VIDEO SETTING”.
1 Press MENU T to display the
“MENU 6” menu, then select
“AI ECO SENSOR”.
MENU
6
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR
AI ECO DISPLAY
MENU
6
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR
AI ECO DISPLAY
1
ON
1
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press CHANNEL –/+ or MENU
/
/
.
2 Press CHANNEL –/+ or MENU
to select “OFF”, “1” or “2”.
/
The sub-menu is displayed.
VIDEO STATUS : VIDEO-1
PICTURE MODE : STANDARD
VNR : ON
• For detailed description, see the “ECO
SENSOR button” on page 9.
PICTURE EFFECT : ON
RESET BY
0
AI ECO DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
You can display on the screen the effect
of the AI ECO SENSOR function.
3 Press CHANNEL –/+ or MENU
to select “VIDEO-1”, “VIDEO-2” or
“VIDEO-3”.
1 Press MENU T to display the
“MENU 6” menu, then select
“AI ECO DISPLAY”.
4 Press MENU T to select
“PICTURE MODE”, then press
MENU
6
CHANNEL –/+ or MENU
select the picture mode of
/
to
FAVORITE CH SETTING
VIDEO SETTING
AI ECO SENSOR
AI ECO DISPLAY
1
ON
“BRIGHT”, “STANDARD” or
“SOFT”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
5 Press MENU T to select “VNR”,
then press CHANNEL –/+ or
2 Press CHANNEL –/+ or MENU
to select “ON”.
/
MENU
/
to select VNR “ON”
or “OFF”.
The clover mark indicating the
brightness of your room is displayed
for several seconds each time the
brightness changes. The number of
clover marks displayed on screen
increases as your room becomes
darker.
6 Press MENU T to select
“PICTURE EFFECT”, then press
CHANNEL –/+ or MENU
/
to
select PICTURE EFFECT “ON”
or “OFF”.
• PICTURE MODE and VNR settings are
changed only when VIDEO input mode is
selected while PICTURE EFFECT is ON.
Otherwise, PICTURE MODE and VNR are
not changed.
To cancel the AI ECO DISPLAY
function, select “OFF”.
• Press 0 button to reset the setting.
19
Attaching the Twin Port Bass
Blaster Unit
<AV-21V531/AV-29V531 only>
The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the
TV, mount the Twin Port Bass Blaster unit correctly on the TV.
Note:
• The BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly to
the TV. For details on the BASS functions, see page 8.
CAUTION:
• The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a
screw. When using the unit, pay attention to the following cautions. Otherwise, the unit or TV
may fall over and be damaged, or cause unexpected injury.
- Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.
- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before
you move the TV, be sure to remove the unit.
- Do not move the TV by holding the Twin Port Bass Blaster Unit.
1 Place the unit on top of the TV
making sure that the mounting
pin on the bottom of the unit
fits into the mounting hole on
the top of the TV.
Twin Port Bass Blaster Unit
• When you mount the unit, make sure
that the mounting pin fits properly
into the mounting hole. Otherwise, it
may slide off the top of the TV. This
may cause damage or cause
unexpected injury.
2 Firmly insert the Twin Port Bass
Blaster Unit connector into the
BASS SPEAKER OUT terminal.
COMPONENT
VIDEO-1
INPUT
(
)
VIDEO-2
INPUT
OUTPUT
S
OVER
V
Y
C
V
L
/V
B
BASS
SPEAKER
OUT
L
L
/MONO
/ MONO
R
C
R
R
R
20
TV buttons and parts
<AV-29V311/AV-29V511/AV-29V531>
3 4
5
6
8 7
9
0
2
1
<AV-21V311/AV-21V511/AV-21V531/AV-25V311/AV-25V511>
1
2
3
4
5
7
8
9
0
1 Headphone jack
2 VIDEO-3 terminal
3 MENU button
4 CHANNEL m buttons
5 VOLUME m buttons
6 TV/VIDEO button
7 ECO sensor
8 Remote control sensor
9 POWER lamp
0 Main power button
21
Using the buttons on the TV
Basic operation
Operating menus
Check to make sure the CHILD LOCK
function is set to “OFF”. When the
CHILD LOCK function is set to “ON”, the
TV cannot be operated using the front
control buttons. For details, see “CHILD
LOCK” on page 14.
You can operate function in menus using
the front control buttons on the TV.
1 Press MENU y to display a menu.
2 Press MENU y repeatedly to
display the menu you want to use.
1 Press CHANNEL –/+ to turn the TV
on from standby mode.
3 Press MENU y to select the desired
function or item.
2 Press CHANNEL –/+ to select a
channel.
4 Press CHANNEL –/+ or VOLUME –/+
to carry out the desired operation.
3 Press VOLUME –/+ to adjust the
volume.
For details, see the description for
each function.
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
5 Press VOLUME –/+ to turn the
menu display off.
To turn the sub-menu display off:
To change the TV mode to the VIDEO
mode:
1
Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
• Press the TV/VIDEO button if the TV has
one. See page 7.
NO
M
• If the TV has no TV/VIDEO button, select
the VIDEO mode with the INPUT function
in “MENU 1”.
SELECT BY
PROGRAM BY -+
EXIT
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME –/+ to turn the display
off.
22
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t
due to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a
service technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
• Adjust the picture settings. (see page 17.)
• Is a component signal output device, such
as a DVD player, connected correctly?
(see page 5.)
The screen turns blue
• Is the BLUE BACK function on?
(see page 14.)
• Is the VIDEO-2 SET function setting correct?
(see page 15.)
• If noise (snow) totally blocks out the
picture, check the following.
Remote control inoperable
• Replace the batteries. (see page 3.)
- Have the TV and aerial been connected
properly?
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
Buttons on front of the TV do not
work
• Switch the CHILD LOCK function off.
(see page 14.)
• If the TV or aerial suffer interference from
other equipment, stripes or noise may
appear in the picture. Move any equipment
which can cause interference away from the
TV.
TV does not respond immediately
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or
replace it with an aerial with better
directionality.
• When a white and bright still image (such
as a white dress) is displayed on the screen,
the white part may look as if it is coloured.
When the image disappears from the screen,
the unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 10.)
• Is the AUTO SHUTOFF function on?
(see page 14.)
The picture is tilted
Poor sound
<AV-29V311/AV-29V511/AV-29V531 only>
• Press the SOUND SYSTEM button to select
another sound system. (see page 8.)
• A picture may be tilted due to the influence
of the earth’s magnetism. In this case, use
the PICTURE TILT function to adjust the tilt.
(see page 13.)
• Adjust the sound settings. (see page 17.)
• If there is noise during mono sound output,
press the
button to select
“MONO”. (see page 10.)
23
Specifications
Model
AV-21V311
B, G
AV-21V511
AV-21V531
AV-25V311
B, G
TV RF
B, G, I, D, K, M
systems
Colour
PAL, SECAM
PAL, SECAM, NTSC 3.58/4.43 MHz
PAL, SECAM
systems
Channel
and
frequencies
VHF low channel (VL) = 46.25 to 168.25 MHz
VHF high channel (VH) = 175.25 to 463.25 MHz
UHF channel (U) = 471.25 to 863.25 MHz
•
Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20)
and hyper band (S21 to S41).
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power
consumption
MAX 126 W
AVG 81 W
MAX 150 W
AVG 93 W
MAX 164 W
AVG 102 W
Screen size
(measured
diagonally)
Picture tube
549 mm
Visible area
508 mm
Picture tube
634 mm
Visible area
590 mm
Audio output
(Rated power
output)
7 W + 7 W
7 W + 7 W +13 W
7 W + 7 W
Speakers
(6.5 cm x 13 cm ) x 2
(6.5 cm x
(6.5 cm x
13 cm) x 2
13 cm) x 2
13 cm round x 1
External input/ VIDEO-1:
S-VIDEO input, VIDEO input, AUDIO L/R input
output
VIDEO-2/COMPONENT:
VIDEO input, AUDIO L/R input,
COMPONENT VIDEO (Y/CB/CR) input
VIDEO input, AUDIO L/R input
VIDEO output, AUDIO L/R output
stereo mini jack (3.5 mm diameter)
VIDEO-3:
OUTPUT:
Headphone jack:
Dimension
649 x 465.5 x 473.5
649 x 478 x 473.5 728 x 536 x 481.5
(WxHxD) (mm)
Weight
24.5 kg
25.9 kg
• Remote
30 kg
• Remote
Accessories
• Remote
• Remote
control unit:
RM-C1305 x 1
control unit:
RM-C1303 x 1
control unit:
RM-C1307 x 1
control unit:
RM-C1305 x 1
AA/R6/UM-3 dry cell battery x 2
Matching aerial-adapter x 1
Design and specifications subject to change without notice.
24
Specifications
Model
AV-25V511
AV-29V311
B, G
AV-29V511
AV-29V531
TV RF
B, G, I, D, K, M
B, G, I D, K, M
systems
Colour
PAL, SECAM
PAL, SECAM
PAL, SECAM, NTSC 3.58/4.43
systems
NTSC 3.58/4.43 MHz
Channel
and
frequencies
VHF low channel (VL) = 46.25 to 168.25 MHz
VHF high channel (VH) = 175.25 to 463.25 MHz
UHF channel (U) = 471.25 to 863.25 MHz
• Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20)
and hyper band (S21 to S41).
Power input
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)
Power
consumption
MAX 164 W
AVG 102 W
MAX 190 W
AVG 145 W
MAX 212 W
AVG 145 W
Screen size
(measured
diagonally)
Picture tube
634 mm
Visible area
590 mm
Picture tube
728 mm
Visible area
676 mm
Audio output
(Rated power
output)
7 W + 7 W
10 W + 10 W
7 W + 7 W + 13 W
Speakers
(6.5 cm x 13 cm ) x 2
(6.5 cm x
13 cm) x 2
13 cm round x 1
External input/ VIDEO-1:
S-VIDEO input, VIDEO input, AUDIO L/R input
output
VIDEO-2/COMPONENT:
VIDEO input, AUDIO L/R input,
COMPONENT VIDEO (Y/CB/CR) input
VIDEO input, AUDIO L/R input
VIDEO output, AUDIO L/R output
stereo mini jack (3.5 mm diameter)
VIDEO-3:
OUTPUT:
Headphone jack:
Dimension
728 x 536 x 481.5
812 x 584.2 x 520.5
(WxHxD) (mm)
Weight
30 kg
43.5 kg
45.9 kg
Accessories
• Remote
• Remote
• Remote
• Remote
control unit:
RM-C1303 x 1
control unit:
RM-C1305 x 1
control unit:
RM-C1303 x 1
control unit:
RM-C1307 x 1
AA/R6/UM-3 dry cell battery x 2
Matching aerial-adapter x 1
Design and specifications subject to change without notice.
25
JVC SALES & SERVICE (THAILAND) CO., LTD
Head Office & Service Center
10th Floor, Sino-Thai tower, 32/31 Asok Road, (Sukhumvit 21),
Bangkok 10110
TEL: (02)-260-1249-51 FAX: (02)-260-1275 ~ 6
Service Center
Soi Sukhumvit 26 Branch, 108 Sukhumvit 26 (Soi Aree), Klongtoan,
Klongtoey, Bangkok 10110
TEL: (02)-204-3004-11 FAX: (02)-204-3033
Norhtern Regional Service Center
3/11 Sam Lan Road (Nha Wat Prasing), Tambol Prasing,
Amphur Muang, Chiang Mai 50000
TEL: (053)-281-441 ~ 2 FAX: (053)-814-547
E-mail : [email protected]
|