ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTELLANO
ITALIANO
PORTUGUÊS
AV-21FT1SUG
AV-21FT1BUG
AV-29FT1SUG
AV-29FT1BUG
INSTRUCTIONS
FARBFERNSEHGERÄT
TELEVISEUR COULEUR
KLEURENTELEVISIE
TELEVISOR A COLOR
TELEVISORE A COLORI
TELEVISOR A CORES
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
INSTRUZIONI
INSTRUCÖES
(SOMENTE PARA MODELO AV-29FT1)
IDENTITY OF LOCAL & REMOTE CONTROL
LOCAL CONTROL
AV-29FT1 MODEL
AV-21FT1 MODEL
Front
MAIN POWER button
FRONT S-VIDEO INPUT socket Ext-3
(only for AV-29FT1)
B1
B2
FRONT VIDEO INPUT socket Ext-3
FRONT AUDIO INPUT socket Ext-3
B3
B4
B5
B6
B7
B8
B9
B10
HEADPHONE socket
STAND-BY indicator
REMOTE sensor
TV / AV button
VOLUME UP/DOWN buttons
PROGRAM UP/DOWN buttons
B1
B3
B4
B5
B6 B7
B8
B9
B10
B1
B2 B3
B4
B5 B6 B7 B8
B9
B10
Rear
ANT
AERIAL socket
(S
)
EXT-1
EXT-2
SCART 1 socket EXT-1
SCART 2 socket EXT-2
REMOTE CONTROL
TV mode
RM-C1514
TELETEXT mode
A1
A2
A3
A4
A5
A6
A7
A8
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
SOUND MUTE
POWER
SOUND MUTE
POWER
NUMBER 0..9
RED
GREEN
A1
A2
/I
/I
0
9
0
9
NUMBER 0..9
ZOOM / SKIP
SOUND EFFECT / MOVE
SLEEP / DELETE
Not used
TV > TELETEXT
PICTURE / OK
MENU
PROGRAM UP (CURSOR UP)
PROGRAM DOWN (CURSOR DOWN)
VOLUME DOWN (CURSOR LEFT)
VOLUME UP (CURSOR RIGHT)
TV / AV
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
zoom
A3
YELLOW
CYAN
A5
1
A4
TELETEXT > TV
Not used
VOL/BRIGHTNESS MENU
SELECTION
PAGE UP
PAGE DOWN
VOL / BRIGHTNESS DOWN
VOL / BRIGHTNESS UP
Not used
PAGE HOLD
Not used
REVEAL
DOUBLE SIZE
Not used
Not used
CANCEL
A6
A7
A9
PICTURE/OK
MENU
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
MENU
A8
PICTURE/OK
MENU
A11
A15
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A10
A14
A13
A17
AV
A12
A18
A16
A20
A19
A23
?
A21
A22
A26
A24
A25
X
i
RM-C1514
L
INFORMATION
VCR / TELETEXT / DVD switch
MODE Stereo/Mono
INDEX
SUBPAGE
VCR / TELETEXT / DVD switch
Not used
D
V
I / II
Dual language
I / II
2
INSTALLATION
AUTO TUNING SYSTEM
MENU SELECTION
PICTURE
SOUND
Press remote control MENU button (A10) to display the MAIN MENU.
MENU
Move the cursor to INSTALL by using the remote control CURSOR
UP (A11),DOWN(A12) buttons.
Then press the remote control OK button (A9).
INSTALL
FEATURES
Note: All menus are removed within 60 seconds if you don't press
any button.
COUNTRY SELECTION
INSTALL
GB
Position the cursor at ATSS Menu and select country code where TV is
used by pressing the remote control CURSOR LEFT (A13), RIGHT(A14)
buttons.
ATSS
EDIT
GB
C 31
551.25
BBC1
01
SYSTEM
CHANNEL
FREQUENCY
NAME
The following countries can be selected.
A, B, CH, CZ, D, DK
E, F, FIN, GB, H,
PROGRAM
STORE TO
I,
01
IRL, N, NL, PL, S, Others
ATSS - Auto Tuning and Sorting System
After selecting country code, press and hold OK button for 3 - 4 seconds until "Please wait!" is displayed, then auto program
tuning starts searching all the available TV stations in your area. When auto tuning and sorting is completed, the EDIT menu
with the recorded programs appears on the screen.
To exit the EDIT menu, press MENU button 3 times, then the menu display will disappear from TV screen. Now you can select
program using the remote control UP (A11) or DOWN (A12) buttons.
EDIT MENU
EDIT
SKIP
The EDIT menu shows you the programme position assignment. When
PR
06
05
04
03
02
01
00
NAME CH
using the AUTO TUNING method, the broadcasts may not be found and
stored in the order you desired. For example, BBC1 may not be allocated to
programme number 01, and BBC2 may not be allocated to programme
number 02, etc. The EDIT menu enables you to change the programme
position assignment according to your personal preference.
CH 4
S4C
C46
C39
C05
C31
CH 4
ITV
BBC 2
BBC 1
-----
C34
C37
C21
To reach the EDIT menu you have to first select INSTALL menu from the
MAIN menu.
CHANGING ORDER OF CHANNELS
Position the cursor to the programme number you want to move and press the
remote control GREEN (A5) MOVE button. The programme turns to red colour.
Then use the UP (A11) or DOWN (A12) buttons to move the programme
number you wish to store it to and press MOVE button again to confirm the
operation. Press MENU to return to INSTALL menu.
PICTURE/OK
DELETE PROGRAMME POSITION DATA
Position the cursor to the programme number you wish to delete using the
remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE
(A6) button.
The delete programme is instantly moved to programme N° 99. The programme
which was located at N° 99 will automatically move to N° 98.
CTURE/OK
4
SKIPPING THE CHANNELS
Position the cursor to the programme number you wish to skip, then press the
RED (SKIP) (A4) button. A skipped programme is marked with the sign "
at its right end. The channel corresponding to a skipped programme will not
appear on screen when changing channels using PROGRAM UP (A11) /
DOWN (A12) buttons.
"
PICTURE/OK
MANUAL CHANNEL TUNING
Tuning by ATSS (Auto Tuning Sorting System) is recommendable, as it is the
easiest tuning method. But Manual Tuning is also possible using the following
procedure.
INSTALL
GB
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
GB
BROADCASTING SYSTEM SELECTION
Select INSTALL menu and using the remote control CURSOR UP (A11) / DOWN
(A12) buttons, move the cursor to SYSTEM menu and select the appropriate system
by the LEFT (A13) or RIGHT (A14) button.
C 49
551.25
BBC1
01
PROGRAM
STORE TO
01
"FRANCE"
"GB"
"EURO"
"E/EURO"
France SECAM L/L'
Great Britain / Ireland PAL-I/I'
Westen Europe PAL-SECAM B/G
Eastern Europe PAL-SECAM D/K
ACTIVATING MANUAL TUNING
Move the cursor to FREQUENCY (channel frequency) menu and press and hold for more than 2 seconds the remote
control CURSOR LEFT (A13) or RIGHT (A14) buttons. When one channel is tuned, the corresponding station name is
indicated automatically in NAME menu.
To tune the next channel, press the remote control CURSOR LEFT (A13) or RIGHT (A14) buttons again.
CHANNEL AND FREQUENCY MENU
If you know the channel or frenquency number you want to search, enter the data by 0...9 buttons.
TV will tune that channel quickly.
PERFORM FINE TUNING
If you are unable to obtain good picture or reasonable sound volume due to poor reception it is possible to perform fine tuning.
- Select the "FREQUENCY" menu.
- Press for less than 2 seconds, the remote control CURSOR LEFT (A13) and CURSOR RIGHT (A14) buttons to activate
_
FINE TUNING
in steps of 0.05 MHz(50kHz).
/ +
STORING CHANNEL NAME
When one channel is tuned, the corresponding station NAME will be detected automatically. But in some cases, NAME
will not be detected due to the broadcasting situation. You may put in the channel NAME yourself.
Position the cursor to NAME menu and press the remote control CURSOR RIGHT(A14) button. A cursor appears on the
left end of NAME line ("-----"). Then press CURSOR UP (A11) or DOWN (A12) buttons untill you get the right letter or
symbol. Move the cursor to the next position by using CURSOR LEFT (A13) or RIGHT (A14) buttons and repeat the
operation. Press OK (A9) button to store the NAME.
PROGRAM MENU
The number on the right side of the PROGRAM menu indicates the program number of the currently displayed channel.
STORE TO MENU
Select STORE TO menu and select the program number by 0....9 buttons or CURSOR LEFT (A13) or RIGHT (A14) buttons
to which you want to store the currently displayed channel then press OK button.
Warning ! If you store the number already programmed, the previous programmes will be erased automatically.
5
DAILY USE
SWITCHING ON AND OFF TV SET
SWITCHING ON
If stand-by indicator (B6) is not lit, then the TV set is
powered off.
Switch the set ON with POWER (ON/OFF) Button
(B1), then, stand-by indicator turns to red.
Press again PROGRAM UP or DOWN buttons (B10) on
the front of the set, or POWER button (A2) or UP/DOWN
button (A11) or, one of the NUMBER 0...9 button on the
remote control, then stand-by indicator turn to green and
picture appears on the screen.
If stand-by indicator (B6) is flashing red and green, TV
set is in CHILD LOCK mode. To deblock CHILD LOCK,
press the remote control POWER button (A2) or one of
NUMBER 0...9 buttons (A3) or PROGRAM UP (A11) /
DOWN (A12) buttons.
Note : The front panel PROGRAM UP or DOWN (B10)
button will not function when CHILD LOCK is ON.
SWITCHING OFF
Press POWER button (A2) on the remote control to return the
set to its STAND BY mode. If you don't use the set for an
extended period of time, turn it off with MAIN POWER button
(B1) on the set.
PROGRAM SELECTION (FROM 0 TO 99)
DIRECT SELECTION
1
4
7
2
5
8
0
3
6
9
Use the remote control NUMBER 0..9 buttons (A3).
For two digit program numbers, enter the second
digit within 2 seconds.
From AV mode, you can select TV
program directly by pressing remote
control 0.....9 buttons (A3).
P
P
UP/DOWN SELECTION
or
Use the remote control PROGRAM UP (A11) /
DOWN (A12) buttons or the TV set front panel
PROGRAM UP / DOWN buttons (B9).
6
SOUND CONTROL
Mute
Volume adjustment
- Mute the sound by pressing the remote control SOUND
MUTE button (A1).
Use the remote control VOLUME UP (A14) /
DOWN (A13) buttons or the TV set front panel
VOLUME UP / DOWN buttons (B9).
- Then,
logo is displayed. The previous sound setting is
returned after pressing the same button a second time.
- If a sound related function is used (e.g. VOLUME,
) then
the MUTE will also be cancelled.
P
or
Sound effects
A SPATIAL sound effect is available, by using the remote
control (A5) button.
P
PICTURE/OK
Mono forcing, dual language
- If you are unable to get good sound quality for a
program due to poor reception, you can force a
change from stereo to mono transmission by
pressing the remote control MODE button (A26).
Then the program status display will indicate
"MONO" in red.
The following display appears:
Spatial sound effect
SPATIAL
STEREO
18:20
Sound transmission mode
Clock
I/II
To return to initial sound effect, press again the
The following display appears:
(A5) button.
- On the other hand, during a program with dual
language transmission, the MODE button (A26)
allows you to toggle between the first and second
language. The program status display will indicate
"DUAL 1" or "DUAL 2" (plus NICAM according to the
received signal) instead of Stereo or Mono.
- To return to initial state, press again the MODE
button (A26).
No sound effect
OFF
STEREO
18:20
Sound transmission mode
Clock
For other adjustments such as BASS or TREBLE, BALANCE,
use the SOUND menu (here under).
SOUND MENU
Select SOUND menu from the MAIN menu.
SOUND
- Select VOLUME function to adjust the volume level.
VOLUME
- Select the BASS and TREBLE functions to adjust the tone levels.
- Select BALANCE function to adjust sound balance between the
left and right speakers. If the indicator is highlighted in red, then
the central balance position has been found.
BASS
TREBLE
BALANCE
7
PICTURE CONTROL
Select PICTURE menu from the MAIN menu.
PICTURE
- Select and adjust the level of each function: BRIGHTNESS, CONTRAST, COLOUR,
SHARPNESS, TINT (see below).
- The above modified values are automatically stored in FAVOURITE mode.
- The FAVOURITE preset contains the settings that you lastly entered.
BRIGHTNESS
CONTRAST
COLOUR
If the NTSC standard is detected (eg from VHS player connected to EXT-1), then TINT
indicator will appear and you can adjust TINT. Otherwise, TINT will not be displayed.
SHARPNESS
TINT
You can select three pictures settings, by pressing repeatedly the remote control
PICTURE/OK button (A9) :
PICTURE/OK
- NORMAL I (standard hard picture)
- NORMAL II (standard soft picture)
- FAVORITE.
ꢀꢁꢂꢂꢂꢂꢂꢂꢂꢂ%%&ꢁꢂ
1250$/ꢂ,,
ꢁꢁꢃꢁꢁ
01
BBC1
ꢀꢁꢂꢂꢂꢂꢂꢂꢂꢂ%%&ꢁꢂ
FAVOURITE
11:11
1250$/ꢂ,
ꢁꢁꢃꢁꢁ
PROGRAM STATUS DISPLAY (INFORMATION)
i
Use the remote control
button (A24) to
Channel name
Channel number
Clock
01
BBC1
display (for 4 seconds only) program status
information. This display appears also after
a program selection or after switching on
the TV set.
Sound transmission
Mode:
In case Mono is forced by
MODE button (A26), then
it is displayed in red color.
(see page 7)
STEREO
11:11
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By pressing repeatedly the remote control
YELLOW button (A6), you can enter one of the following settings :
OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF
The SLEEP time remaining (before TV turn-off) can be seen
01
BBC1
again at any time by one touch on the remote control YELLOW
button (A6). A second touch (while the status display is on
screen) will modify the SLEEP time remaining.
STEREO
SLEEP
Remaining time (in minutes)
before the TV switches off
18
FORMAT SELECTION
AUTO setting: If picture format signalling data is received, then the most appropriate ZOOM format will be automatically
selected.
Otherwise, the preferred mode of the user can be forced by repeated pressing of the remote control ZOOM button (A4): The
following picture formats are available:
AUTO
>
FULL SCREEN > 14:9
>
16:9
>
AUTO.
8
FEATURES MENU
Select the FEATURES MENU from the main MENU as follows :
P
MENU
PICTURE/OK
P
Press on the button MENU
Position cursor on FEATURES menu
Press on the OK button
FEATURES menu contains the following sub-menus.
1. The currently selected LANGUAGE is
displayed. Press CURSOR LEFT (A13) /
RIGHT (A14) to change the selection.
1. LANGUAGE selection (see below).
2. When CHILD LOCK is set to ON,
Prevents the use of the TV set without
remote control.
2. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator
flashes red and green to indicate the
CHILD LOCK is set.
- The front panel TV buttons (B10) become
inactive and the TV will only respond to the
remote control.
3. TV Clock setting
When TV is turn on with MAIN POWER
button (B1), clock will be set automatically
with Program N° 1 teletext signal, if
transmitted.
FEATURES
LANGUAGE
CHILD LOCK
CLOCK
GB
OFF
14:30
07:15
04
If you turn off the TV with MAIN POWER
button, the clock setting is lost.
3. TV clock timer can be also entered
manually. By manual clock setting, clock
will start at 00 seconds upon entry of the
4th figure.
WAKE TIME
WAKE PROG.
NOISE RED.
4. Wake up function
ON
This function is available when the clock is
set and TV is set in stand-by mode. The TV
sets turns on automatically at the WAKE
TIME and with the WAKE UP TV
4. - Switch the WAKE UP function 'OFF' or
'ON' (the time will be shown e.g. 07:15)
.
with the remote control CURSOR LEFT
(A13) / RIGHT (A14) buttons.
- Enter the wake up time with the remote
control 0..9 NUMBER (A3) buttons.
programme number entered.
5. Shared with WAKE TIME.
5. Select WAKE UP TV program number.
6. Noise Reduction is picture noise reduction
feature.
6. Adjust to be ON or OFF.
- When ON, the Noise Reduction is active
for all programs (0 to 99).
- When OFF, the function is inactive.
LANGUAGE SELECTION
Select LANGUAGE selection from the FEATURES menu.
The following languages are available :
BG > CZ > > D > DK > E > F > FIN > GB > GR > H > I > N > NL > PL > RO > RUS > S > SK
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A13), RIGHT (A14) buttons.
- Press MENU button twice to confirm the selection and exit from the MENU.
Note : The languages shown are subject to modification without prior notice.
9
9
TE LE TE XT
ENTERING/LEAVING TELETEXT MODE
- Set the VCR /
/ DVD switch (A25) to the
(teletext) position.
- Press the remote control TELETEXT ( ) button (A8) to select teletext mode.
- To return to TV mode, press again the TELETEXT ( ) button (A8).
PICTURE/OK
- Note : Some of the buttons may not work if the VCR /
/ DVD switch is not set to the
(teletext) position.
PAGE SELECTION
- You can directly enter the 3 figure page number by using the remote control NUMBER 0..9 buttons (A3).
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A11) / DOWN (A12) buttons.
COLOUR buttons FOR TELETEXT
- A red, green, yellow, and blue field is shown at the bottom of the screen. If TOP or FLOF teletext (FASTTEXT) is transmitted
by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily.
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not
immediately available the rolling header will be active until the page arrives.
USEFUL TELETEXT FUNCTIONS
i
INDEX button
(A23)
Allows you to return directly to the initial teletext page.
PAGE HOLD button
(A16)
Several sub pages can be combined under a page number and are scrolled at an interval determined by the television station.
The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are looking at the 3rd
page of a total of 6 pages. If you want to look at a subpage for a longer period of time, press the HOLD button. " HOLD "
appears at the top of the screen and the contents of the subpage shown are kept on the screen and no longer updated or
switched to other subpages. Pressing the HOLD button again, the current subpage appears.
SUBPAGE button
(A24)
Allows you to request a specific subpage:
- Press the SUBPAGE button. The letter before the page number in the teletext will change from "P" to "S" to indicate that the
subpage fuction is active.
- In place of the telext clock, in the top right hand corner of the display, - - : - - will appear in red. This is ready to accept the
subpage number.
- Enter directly the subpage number you want with the remote control NUMBER 0..9 buttons (A3): for example to request the
2nd subpage, type 0002.
- The clock will then be replaced in the header. Once found, only the requested subpage will be displayed.
- At any time, another subpage number can be entered with the remote control NUMERO 0...9 (A3), and new figures displayed
in place of the clock.
- To exit subpage mode, press the SUBPAGE button (A24) again. The letter before the page number will change back from
"S" to"P" again.
Warning: If the subpage does not exist, then the rolling header will roll continuously and no new page will be found.
10
DOUBLE SIZE button
(A19)
Repeadly pressing the SIZE button doubles the character size in the following order :
Upper half of the page> Lower half of the page > Return to normal size
?
REVEAL ANSWER button
(A18)
This fonction can be used on certain pages to reveal the solution of riddles.
Press the REVEAL button to reveal a hidden answer and press again to hide it.
VOLUME, BRIGHTNESS CONTROL
VOLUME (and sound MUTE), BRIGHNESS controls are all possible in teletext mode. The BRIGHTNESS control is dedicated
to the teletext display.
Volume change is always possible, but brightness control is only possible if teletext covers all of the screen (eg. brightness is
disabled when teletext is being used for subtitles).
- Access the VOLUME control by pressing the MENU button (A10) in teletext mode.
- A bargraph will appear at the base of screen. A second press on the MENU button (A10) will access the BRIGHTNESS
control (if available).
- Then, the brightness or volume can be adjusted by using the remote control CURSOR RIGHT (A14) / LEFT (A13) buttons.
P
MENU
P
- Mute can be activated in teletext mode at any time by pressing the SOUND MUTE button (A1).
- If volume mute is active, the volume bargraph indicator will flash.
- Any change to the volume level will cancel the volume mute.
WATCHING TV WHILE PAGE SEARCHING
The CANCEL function can be used to make the teletext page transparent, thus revealing the TV
picture:
X
- To enter cancel mode, press the CANCEL
button (A22) while in teletext mode. The TV
program will reappear on the screen, while only the teletext header remains at the top of the
screen.
X
- If you enter a new page number in this mode: the requested page number will be in red and the
page number in the header will be rolling. Once the page entered has arrived, the rolling number
will stop and the requested page number will return to cyan.
X
- The teletext page can be made visible again by pressing the CANCEL
button (A22).
- It should be noted that the TV program cannot be changed while teletext is active, or in cancel
mode.
WATCHING TV WITH TELETEXT SUBTITLES
If the actual teletext page is a news flash or subtitle page, then most of the TV picture becomes visible.
11
CONNECTING EXTERNAL EQUIPMENT
The rear Scart EXT-1, Scart EXT-2 sockets, the front EXT -3 socket are three dedicated sockets to connect audio-video equipment.
TV/AV SELECTION
AV
Allows to switch between TV and external modes. By repeatedly pressing the remote control AV (A15) or the
TV front panel TV /AV button (B8), the on-screen display is changed as shown :
EXT-1 > EXT-2 > EXT-2 S > EXT-3 > EXT-3 S > TV (AV-29FT1 model)
EXT-1 > EXT-2 > EXT-2 S > EXT-3 > TV (AV-21FT1 model)
Remark: If the signal source from the rear SCART socket (EXT-1) is RGB (e.g.normally from a DVD player)
Rear
VCR / DVD / Video Game / Pay-TV decoder
Important: If your video equipment does not have SCART socket(s), or if you wish to
use only the aerial (RF) connection (not recommended), then you should make use
of program number 00 on the TV set for best performance.
AERIAL socket
ANT
( S
)
EXT-1
EXT- 2
REAR SCART SOCKET (EXT-2)
This socket has video / audio inputs and outputs.
Automatic AV switching equipment (for example most
VCR's) can be connected to this socket. In most cases,
when connecting powered equipment to this socket, the
TV set switches automatically to AV mode. If not, then
use the AV buttons (A15 or B8) to select EXT-2.
REAR SCART SOCKET (EXT-1)
This socket has video / audio inputs and outputs. It is recommended
to connect to this socket automatic AV switching equipment such
as pay-TV decoders, video games, DVD players and most VCR's.
In most cases, when connecting powered equipment to this socket,
the TV set switches automatically to AV mode. If not, then use the
AV buttons (A15 or B8) to select EXT-1.
You can also receive an S-VHS signal by selecting
EXT-2 S with the AV buttons (A15 or B8).
Front
FRONT AV SOCKET (EXT-3)
The front AV socket has audio and video inputs. Without the video input connection, audio output is not available.
To switch from TV to these inputs, use the AV buttons (A15 or B8) and select EXT-3.
Note (ONLY FOR AV-29FT1 MODEL): Do not connect the cables to front video input and S-video input at the same time. If do so, picture will
not be displayed properly.
$9ꢀꢁꢂ)7ꢂꢃ02'(/
$9ꢀꢁꢄ)7ꢂꢃ02'(/
FRONT S-VHS JACK
The front S-VHS jack
(B2) has video inputs
only. It is necessary to
connect the audio inputs
to socket (B4) in order to
have audio and video.
To watch TV from these
inputs, use the AV
HEADPHONE SOCKET
To hear TV sound with headphones,
insert a 3.5mm headphone plug into the
headphone socket. The speaker's sound
will be automatically cut off.
buttons (A15 or B8) and
select EXT-3 S.
OR
CAMCORDER
VIDEO GAME
12
TROUBLESHOOTING
z If the plug is disconnected from the AC socket, or the TV aerial has problems, you may think there is a problem with the TV itself. Be
sure to check the following before calling for service.
IMPOR TANT
z Review all instruction in this manual
PR OB LE M
ACTION
GENERAL The TV cannot be turned on.
z Insert the plug in an AC socket.
z Turn the main power on. (See page 3)
.
z The buttons on the front panel of the TV will not work if the CHILD LOCK
is operating (see FEATURES menu, on page 9). Use the POWER button
on the remote control to turn the TV on.
No picture or sound.
z Check aerial connections. (See page 3).
z Select the correct input source (See page 12).
z Change the SYSTEM setting manually (see Manual Channel Tuning on
page 5).
z Did you set the SLEEP function? (See page 8).
z If the broadcast signal is not present for about 30 minutes, the set will be
automatically turned off.
The TV shuts off automatically.
z For safety reasons, the TV will automatically turn off if no operations are
made within approximately 3 hours after the TV is turned on with the
WAKE UP function.
The TV turns on automatically.
Inoperable remote control.
z Did you set the WAKE UP function? (See page 9).
z Replace the batteries. (See page 3).
z Insert the batteries correctly. (See page 3).
z Use the remote control within about 7 metres of the TV.
z Change the SYSTEM setting manually (see Manual Channel Tuning on
PICTURE
Poor colour.
page 5).
z Move any external equipment away until the interference is eliminated.
z Reposition the aerial.
Lines or streaks in picture
(interference)
z Reposition the aerial.
Spots (crosstalk)
z Replace with an aerial with better directionality.
z Reposition the aerial.
z Replace with an aerial with better directionality.
Double pictures (ghosts)
Snowy pictures (noise)
z Check aerial connections.
z Redirect the aerial.
z Replace or repair the aerial.
SOUND
No sound from the TV's
speakers
z Disconnect the headphones.
The following are normal and are NOT malfunctions:
z When touching the picture tube surface, you might feel a slight charge of static electricity. This is because the picture tube contains
static electricity; it does not affect the human body.
z The TV may emit a crackling sound due to a sudden change of temperature. There is no problem unless the picture or sound is
abnormal.
z When a still, bright image (of a white dress, for example) appears on the screen, the image may be coloured. This problem occurs in all
picture tubes, and as the bright image disappears, the colour also disappears.
z This TV is equipped with a microcomputer that may operate abnormally due to interference from external equipment. If this happens,
turn off the main power and disconnect the power cord from the AC socket. Then reconnect the power cord to the AC socket and turn on
the main power again.
13
SPECIFICATIONS
Model
AV-21FT1SUG / AV-21FT1BUG
CCIR B/G, I ,D/K, L/L'
PAL, SECAM
AV-29FT1SUG / AV-29FT1BUG
Item
Broad casting systems
Colour systems
The EXT terminals also support the NTSC 3.58/4.43 MHz system.
Channels and frequencies
* E 2-E12, E21-E70, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2, F2-F10,
F21-F70, R1-R12, R21-R70
* French cable TV channel of broadcast frequencies 116 - 172 MHz and 220 - 469 MHz
Sound-multiplex systems
Teletext systems
Power requirements
Power consumption
Picture tube size
Audio output
A2 (B/G, D/K), NICAM (B/G, D/K, I, L) systems
FLOF (Fastext) / TOP / WST (World standard system
AC 220-240V, 50 Hz AC 230-240V, 50 Hz
59W, stand-by 3W
)
72W, stand-by 3W
Visible area 68cm (measured diagonally
Rated Power output: 7W + 7W
)
Visible area 51cm (measured diagonally
Rated Power output: 4.5W + 4.5W
Euroconnector (21-pin,SCART)
)
Ext-1 terminal
* Video input, Audio L/R inputs and RGB inputs are available
* TV broadcast outputs (Video and Audio L/R) are available.
Ext-2 terminal
Ext-3 terminal
Euroconnector (21-pin, SCART)
* Video input, S-VIDEO (Y/C) input, Audio L/R inputs are available
* Video and Audio L/R outputs are available
RCA connerctors x 3
RCA connerctors x 3
* Video input and Audio L/R inputs are
available.
S-VIDEO connector x 1
* Video input, S-VIDEO (Y/C) input and
Audio L/R inputs are available.
Stereo mini-jack (3.5mm in diameter)
Headphone jack
Dimensions (W x H x D)
626 mm x 472 mm x 473 mm
23 kg
812 mm x 600 mm x 522 mm
46 kg
Weight
Remote control unit
RM-C1514, battery AA / R 6 x 2
Design and specifications are subject to change without notice
Pictures displayed on the screen using this TV's image processing functions should not be shown for any commercial or demonstration
purpose in public places (tearooms and halls in hotels, etc.) without the consent of the owners of copyright of the original picture sources,
as this constitutes an infringement of copyright.
14
|