ITT CTV 29-100-1 ST
Bedienungsanleitung
Operating Instructions
Television
Thank you for buying this television which is designed to give you many years of
satisfactory service.
You may already be familiar with using a television but do please take time to read these
instructions. They are designed to familiarise you with the unit’s many new features and
to ensure you get the very best out of your purchase.
Special features
• 100 Hz digital scan.
• 9 page teletext.
• Fastext and/or Toptext (Optional).
• Letterbox, Subtitle 1 & 2, 16:9, 14:9 picture formats ( for Widescreen TV sets) (Optional).
• Digital Colour Transition Improvement (DCTI).
• Digital Comb Filter (DCF) (Optional).
• Digital Luminance Transition Improvement (DLTI).
• Manual degaussing (Optional).
• Scan Velocity Modulation (SVM.) (Optional).
• Dynamic Focus (Optional).
• 3 step Zoom function (Optional).
2
• Picture freeze function
• Automatically switch to stand by in five mihutes after a channel ceases to transmit or
selecting a channel which has no transmission (Auto off function).
• Virtual Dolby surround (Optional).
• Subwoofer (optional).
• Dynamic Bass Enhancement (Optional).
• Back audio out.
• 5 band graphic equaliser.
• Automatic Volume Limiting (AVL).
• Programme Editing Table.
• Naming the channels.
• Your TV can receive stereo channels directly (NICAM optional).
• Automatic tuning system with country selection (ATS).
• 100 Programme Memory.
• Cable/Hyperband tuner.
• Manual Fine Tuning.
• Child Lock.
• Return to the last channel viewed (SWAP).
• Normalisation system to recall the setting in memory after the volume, colour,contrast,
brightness settings have been changed (PP).
• Picture adjustment using one button (Picture Smart Control).
• Sound adjustment using one button (Sound Smart Control).
• Advanced On Screen Display.
• Infrared Remote Control.
• Programmable on/off timer.
• Multi language menu system (10).
• Stereo headphone socket.
• 2 Scart Sockets: Video cassette recorder, satellite receiver, video disc player,DVD, TV
games or a home computer can be connected to this AV socket with an appropriate
connecting cable (3rd Scart socket is optional).
• S-Video connection.
• Audio/Video RCA sockets.
is a registered trademark of ITT manufacturing Enterprises, Inc., a
subsidiary of ITT Industries, Inc., and is used under license.
Safety is Important
Your safety and the safety of others is important. Please, therefore, ensure you read
the Safety
instructions before you operate this television.
Safety instructions
Read all the safety instructions before first use of your TV.
!
• Position the television so that direct light does not fall on
the screen. Excessive light will cause a washed out effect.
•
Position the power supply lead and other leads so that
they are not likely to be walked on or pinched by things
placed on or against them.
3
• Do not place objects filled with liquid such as vase or
flower pot on the television top.
Do not expose the TV to dripping or splashing of liquids.
Do not place naked flame sources such as lighted candles
on the TV set.
• Make sure that no naked flame sources, such as lighted
candles, are placed on top of the appliance.
• Do not place the television near heat sources such as
radiators, ovens, stoves, etc.
• Do not use the television near any apparatus that produces
a magnetic field such as HI-FI speakers or electric motors
otherwise colourpurity may be affected.
• The heat built up in the set escapes through ventilation
holes, so do not cover the set by drapes, clothes etc. that may
block air circulation. Do not place the television on carpet
or soft furnishings.
• NEVER let children push anything into the holes or slots
on the case.
• Clean the TV Screen using a slightly damp cloth or chamois
leather. Never use abrasive cleaning agents like liquid or
aerosol cleaners.
• Remove the mains plug from the socket outlet while cleaning.
• If you wish to place the television on a shelf or in a wall
unit always ensure there is a minimum air gap of 8 cm
around the top, sides and rear of the television, to assist
ventilation.
• Your TV set is designed to operate with mains voltages
230VAC; 50Hz. Do not connect your TV set to power sources
other than the mains supply.
Getting started
Please Note
When not in use disconnect the plug
from the mains power supply.
Remove your Television carefully
from the box. You may wish to
store the packaging for future use.
Press the Power button on
the front of the TV. The
standby indicator will
In the box
Inside your this package you should have:
illuminate.
•
•
•
Television
Remote control
User guide
Press a Numeric button or the
Program up or Program down
button on the remote handset or
Program up or Program down
button on the front panel to
switch the TV on.
• AAA batteries x 2
4
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
The standby indicator remains on.
The picture will appear after a
few seconds.
Press the Standby button to switch
the TV to standby. The standby
indicator will brighter.
Please Note
Do not leave the television on standby
unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
You can use an outdoor or indoor aerial.
Battery fitting
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your domestic
mains socket outlet (230 V 50 Hz AC).
Control Unit
Front panel
Program Down/Up button
P-
P+
Volume Down/Up button.
V-
V+
5
General
Program ON/OFF switch
Stand by (Depends on model)
Stand by indicator
(External connections: (Rear)
AV1 scart (RGB)
External Connections: (Front or side)
AV3/AV4
R
Right audio RCA (Red)
AUDIO
AV2 scart (Composite)
L
Left audio RCA (White)
Video RCA (Yellow)
AV3 scart (RGB) (Optional)
Aerial socket
VIDEO
Power cable
S-Video connection
S-VIDEO
Headphone socket
Optional
SUBWOOFER
You may wish to connect
audio amplifier or any
similar devices to audio
out. The output is always
the current channel you
are watching.
R
AUDIO
OUT
L
It is used for external
subwoofer in 33” televisions
Please note
• See the external connections table on next page for avaible connections depending the size and
model of your TV set.
• Do not use Video RCA and S-Video connections at the same time, otherwise they will effect the
picture each other.
• RGB inpuks from scart will give you better picture quality.
External connections table
Picture tube
size/typee
28”
4:3
28”
16:9
29”
4:3
32”
16:9
33”
4:3
AV1 Scart
STD.
STD.
STD.
STD.
STD.
STD.
OPT.
STD.
OPT.
STD.
OPT.
STD.
OPT.
AV2 Scart
AV3 Scart
STD.
OPT.
Headphone
socket
STD.
STD.
STD.
STD.
STD.
Audio/Video
RCA
OPT.
OPT.
OPT.
OPT.
OPT.
OPT.
OPT.
OPT.
OPT.
OPT.
S-Video
socket
6
Back audio
out
OPT.
OPT.
OPT.
OPT.
OPT.
STD : Standart
OPT : Optional
N/A : Not available
Please note:
The Audio/Video RCA, S-Video and Headphone socket can be placed on the front panel
or on the right-hand side of the cabinet depanding to the model of your TV.
Remote control
Standby
Mute
Numeric buttons
OK/Zoom (Opt.)
Two digit
AV
Swap
Menu
Program up
Volume down
Volume up
Picture format
Red teletext button
Sound Menu button
Features Menu button
PAT
SCAN
FREEZE
Reveal info (Text)
Picture Scan button
Double heigth (Text)
Picture Freeze button
Index page (P100)
Picture and Text (PAT) button
TV mode button (Text)
Sound smart control
Picture smart control
SMART CONTROLS
Picture source button (Text)
Sound mode button
Sub page button (Text)
Clock button
Green teletext button
Picture Menu button
Blue teletext button
Setup Menu button
Yellow teletext button
Program table button
Using the TV
Turning on for the first time and Tuning
Programme selection
When you first turn your TV on, “
Press the Program up or Program
Language” menu willl appear. To
search on the languages, use the
Program up or Program down.
Volume up or Volume down
butttons and choose your desired
language and press “OK” button.
down buttons on the TV or remote
control or press a Numeric button
to select a programme.
To select a programme whose
number is greater than 9 using the
numeric buttons, press the -/--
button first and then press the two
Numeric buttons. For example, to
select programme 12, press the-/--
button followed by1 and then 2.
Then “Country Selection” menu will
appear. Choose your country using
Program up or Program down.
Volume up or Volume down and
press “OK” button. “Autoprogram”
process will begin and oll the
channels will be searched and stored.
7
You can also select a program by
pressing in the Yellow button to
see the Program Table.
TV controls
Stand-By mode
When your TV is working on, press
the red “STAND-BY” button on the
right upper corner of your remote
control to switch off and the Stand-
By indicator (Led) will be brighter.
To turn on your TV again, press one
off the numaric buttons, Program up
or Program down.
PROGRAM TABLE
P00 ----
P01 ITV
P02 TV4
P03 CNN
P005 P010
P006 P011
P007 P012
P008 P013
P04 BBC1 P009 P014
SKIP DELETE MOVE NAME
Please Note: If you will not use your TV for
a long time, do not leave it on Stand-By mode,
instead switch it off from the power button
on the front panel of the TV set. If you always
leave your TV on Stand-By mode,
demognetization process will notoccur and
that will couse coloring problems. If you
occurs, press the power button to switch off
your TV and weit until it cools off.
Use theProgram up and Program
down buttons to scroll through the
programme numbers. When you
find the program number you want
press theOK button again.
Press theTV/TX button to close the
Program Table.
Volume
Mute
Press the Volume + or Volume -
button on the TV or the Vol or
Vol button on the remote control.
A sound level bar will appear on the
screen.
To mute the sound press the Mute
button on the remote control. A
loudspeaker symbol will appear on
the screen.
Press the Mute button again to
restore the sound. The symbol
will disappear.
Tuning the television
There are two ways of tuning your television:
Manual, where you control the tuning process
or
Autoprogram where the television does it all
automatically.
Pressing Volume up buttons
will also restore the sound.
But pressing the Volume down
button will increase the volume
without restoring.
Your TV will sort all the channels with the
ATS. Sorting will be performed in the
following order:
PP
Personal preference. Press the
PP
button to revert to the
default settings for the TV.
(See TV setup).
a- Selected country’s channels with teletext
and channel names.
b- Selected country’s channels with teletext
and without channel names.
c- Selected country’s channels without
teletext.
Swap
Select the programme you would
like to recall by pressing SWAP
button. Selected programme
number will appear on the upper
left side of the screen. While
d- Foreign channels with teletext and channel
names.
8
watching any programme, you
can recall the selected one by
pressing SWAP button again.
If you press swap button again you
can recall the last programme you
watched. You can cancel SWAP
function by pressing MENU button.
Please Note
If the TV is set to a channel with no signal the
TV will return to standby in 5 minutes.
The last minute remaining is displayed on
the screen.
SWAP
SWAP
PR 01
PR 11 PR 12
PR 13...
PR 01
Automatic tuning (Autoprogram)
There are two ways to access the SETUP
menu:
AV
Your TV has 2 ( 3. scart opt. ) scarts
so every time you press your AV
button, your input will change as
follows:
Press the blue Setup button.
or
Press the Menu button and use the
Program down button to select
SETUP. Press the OK button to
enter the SETUP menu.
1 AV1 when using SCART socket 1
(RGB support) (Option).
2 AV2 when using SCART socket 2.
3 AV3 when using SCART socket 3
(RGB support) (Optional).
4 AV3-S for S-Video equipment to scart 3
(S-VHS/Scart adapter is needed).
5 AV4 when using the RCA sockets
of the TV.
MAIN MENU
6
AV4-S when using the S-video socket.
Press the AV button again to
return to TV.
SETUP
Please note
Manual tuning
If you want to tune manually:
The system will displayed automatically on
SYSTEM row i.e.BG, L, I, DK depending
the receiving broadcasting system of the
country. In some countries the broadcasting
system can be both in BG/DK or BG/LL´.
Only the TV sets produced with Pal Secam
BG/DK or Pal Secam BG/LL´ systems can
receive both BG/DK or BG/LL´ broadcasts.
In this case the user can select the required
SYSTEM using Volume up/down buttons.
In the Setup menu select
PROGRAM NO using
the Program down button
and use the Volume up
button to change the Program No
to 01.
Starting with Program 01, tune
in the first channel as follows:
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Use the Program down button
to select SEARCH.
Use the Program down button to
select AUTOPROGRAM and
press
the OK button. A list of
countries will appear. Select
the desired country using
Press the Volume up or Volume
down button to start the tuning
search.
9
When the search finds a strong
channel signal it will stop
Program and Volume buttons.
searching. The picture will appear.
When you are sure the aerial is
connected properly press the OK
button. Autoprogam will start.
AUTOPROGRAM will flash.
SETUP
To cancel Autoprogram whilst it
isworking press the Menubutton
repetitively.
As Autoprogram stores a channel
it will appear briefly on the screen
before the search continues.
Use theProgram down button to
select PROGRAM NO.
Your TV is now tuned and ready to use.
Please note:
Use theVolume up/down
or numeric
buttons to select the desired
programme number.
If auto sort fails to arrange the programmes
in the required sequence please refer to
programme organising.
Use the Program down button to
select STORE. Press theOKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
Tuning with channel numbers
Enter the SETUP menu by pressing
the blue button.
Fine tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
Press OK button when CHANNEL
row is blue.
In the SETUP menu use the
Program up/down buttons to
select FINE TUNING. Use the
Volume up and Volume down
buttons to fine tune.
Use OK button to select “S” for
cable channels and “C” for
terrestrial broadcast.
Enter the channel number using the
Numeric buttons or use the
Volume up/down buttons on your
remote control.
When you have finished use the
Program down button to select
STORE and press the OK button.
Use the Program down button to
select PROGRAM NUMBER.
10
Use the Volume up/down or
numeric buttons to select the desired
programme number.
SETUP
+ 10
Use the Program down button to
select STORE. Press the
OKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again CHANNEL and continue
the tuning procedure until you
have tuned in all the programmes
you want or the television can
receive.
To exit the SETUP menu press the
TV/TX button.
Please Note
Program organising
Some TV channels may send their
names with teletext transmission. In this
case their names will be automatically
shown on the name line.
Once you have tuned in all the channels you
want, you can change their programme
number, if required, and name them.
To enter the PROGRAM TABLE
menu press the Menu button and
select PROGRAM TABLE and press
the OK button or press directly the
Yellow button.
To move the programmes
You can move the programmes around the
programme list to the order you want
Select the programme you want to
move and press the Green button.
The programme will turn to yellow.
Select the number you want to move
and press the Green button
again and the programme will be
moved to that number.
PROGRAM TABLE
P00 ----
P01 ITV
P02 TV4
P03 CNN
P005 P010
P006 P011
P007 P012
P008 P013
11
P04 BBC1 P009 P014
All the following programmes are
shifted down by one place.
SKIP DELETE MOVE NAME
To delete a programme
PROGRAM 01 will be selected and the
channel stored under PROGRAM 01 will be
shown on the screen.
To delete a programme, select it and
press the Pink button.
The programme will be deleted.
The details of the program will be shown
across the top of the screen i.e. P1 CH31.
All the following programmes are
shifted up by one position.
The buttons used to edit the programs are
shown at the bottom of the display:
To skip programmes
Skipped programmes will not appear
when you move through the program
list using the Program up/
Program down buttons.
They can still be selected using the
numeric buttons or the OK button.
Blue button
Green button
Pink button
Red button
-
-
-
-
Name
Move
Delete
Skip
To name the programmes
Press theBlue button, the selected
line will turn blue and the CH will
be highlighted.
Select the programs you want to
skip
and press the Redbutton. The
program will turn red. To unskip the
program press the Redbutton again.
Use theProgram up and Program
down buttons to select the letters
and numbers and theVolume up
and Volume down buttons to
move through the name.
To exit the PROGRAM EDIT press
the TV/TX button once or the
Menu button twice.
When you select a programme, the
information you entered in the
PROGRAM EDIT menu will appear
on the top of the screen i.e. P1
Press the Blue button again to store
the name.
BBC1.
Repeat this process to name all the
programmes.
This will disappear after
about three seconds.
Volume
TV set up
The TV set up is accessed through a menu
system.
Sets default volume using the Volume up
and down buttons.
To save your settings, select
STORE
STORED
the Menu button to go back to
the previous menu.
and press the OKbutton.
will be displayed. Press
Once you have stored your set up, this is the
set up the TV will default to when you switch
it on.
To enter the MAIN menu press the
Menu button.
Balance
Sets the sound balance
mode using the Volume up
and down buttons
Once in the MAIN menu use the
Program up and Program down
buttons to select items in the menu
and the OK to access sub menus
or use the coloured fastext buttons
for quick access.
To save your settings, select
STORE
and press the OKbutton.
STOREDwill be displayed. Press
the Menu button to go back to the
previous menu.
12
Red button - SOUND
Green button - PICTURE
Pink button - FEATURES
Sound type
This item shows STEREO when receiving
stereo
transmissions.
transmission and MONO for mono
MAIN MENU
The TV can be produced to receive the
NICAM broadcasts as a optional
feature.
If the channel you are watching is in
Nicam stereo the On Screen Display
will show NICAM STEREO for a
while.
Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Please Note
If, while watching a nicam stereo channel,
the signal strength drops and the system
cannot receive nicam stereo the OSD will
show MONO. If the signal strength
increases again and nicam stereo can be
received again, the OSD will show
NICAM STEREO.
Sound menu (red button)
SOUND
VOLUME
Dual I/II
BALANCE
SOUND TYPE
STORE
Some broadcasters supply the programmes
in two languages. To able to listen the
second language select DUAL II by
SOUND TYPE using Volume up/down
buttons.
MONO
HEADPHONE
SOUND FEATURES
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press the Menu
button to go back to the previous
menu.
Select the required item in the menu
using the Program up/down buttons
and make the changes pressing
Volume up/down buttons. Use the
OK button to enter HEADPHONE
and SOUND FEATURES sub
menus.
Press OK to enter the Sound Features.
Headphone
You can set up the volume, balance, bass
treble and sound type (stereo or mono)
of the headphone output.
Use OK button to enter the HEADPHONE
menu.
SOUND FEATURES
SOUND MODE
AVL
SPATIAL
ON
ON
DYNAMIC BASS
EQUALIZER
HEADPHONE
VOLUME
BALANCE
BASS
Sound mode
TREBLE
You can select NORMAL, SPATIAL or
DOLBY VIRTUAL (optional)using the
Volume up/down buttons.
MONO
SOUND TYPE
STORE
SPATIAL sound is an ‘expanded stereo’. It
gives the impression that the two speakers in
the TV are further apart than they really are.
13
To save your settings, select STORE
and press theOK button. STORED
will be displayed. Press theMenu
button to go back to the previous
menu.
“Virtual Dolby Surround sound is based on
Dolby Pro Logic decoding for the
reproduction of Left, Right, Centre and
Surround channels using two loudspeakers.
Manufactured under license from Dolby
Laboratories.
Sound Features
“Dolby”, “Pro Logic” and the double-D
symbol are trademarks of Dolby
Laboratories.
You can set up the Sound Mode, AVL Mode
Dynamic Bass (Optional), Subwoofer
(Optional) and Equalizer from Sound
Features menu.
Please Note
To get the surround effects in “ Dolby Virtual”
mode, you must apply a Dolby Pro Logic
coded input to the TV. You can’t adjust the
AVL and EQUALIZER in DOLBY VIRTUAL
mode.
To access the Sound Features menu press
the Red button on the remote control and
press Volume down button to select Sound
Features.
AVL
TV transmitters have different sound levels.
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
To apply this press Volume up or down
button and select ON for AVL in Sound
Features menu.
Dynamic Bass (Optional)
To give depth effect to bass sound you can
select Dynamic Bass as ON.
To supply this press Volume up or down
button and select ON for Dynamic Bass in
Sound Features menu.
Note: If you select Dynamic Bass as ON
Subwoofer will also be automatically ON.
(If the set has subwoofer option).
Equalizer
Once you have switched the TV off
the equalizer setting will revert to the
stored setting.
To access the 5 band equalizer menu
press Volume up or down button
and press OK on the Equalizer line.
When you have finished in the
Sound sub-menu select STORE and
press the OKbutton.
EQUALIZER
MUSIC
SPORTS
CINEMA
SPEECH
To exit the sub-menu press the
Menu button and return to the
main menu.
USER1
USER2
100 330
1
3.3
10
Hz Hz KHz KHz KHz
Picture menu (Green button)
PICTURE
In this menu there are a series of preset
equalizer settings for different types
of sound output.
There are four music settings - MUSIC,
SPORTS, CINEMA, SPEECH and
USER1 & USER2 modes.
14
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
STORE
PICTURE FEATURES
USER modes allow you to set your own
sound outputs as follows:
The picture menu allows you to set up the
following:
BRIGHTNESS
CONTRAST
COLOUR
Press the OK button to enter the
EQUALIZER menu.
Use the Program downbutton to
select USER1.
Press OK button to adjust the
frequency band levels.
SHARPNESS
and the other PICTURE FEATURES
Use the Volume up button to select
the KHz column you want to
change.
To change, for example, the colour,
select it using Program up and down
buttons.
Use the Program up/down
buttons to make the changes.
Use the Volume up and Volume
down buttons to change the setting.
To save your settings, press the OK
button. Press the Menu button to
go back to the previous menu.
To save your settings, select STORE
and press theOKbutton. STORED
will be displayed.
You can also adjust the settings of USER2
by the same method.
These settings are stored as USER
picture type.
You can change the equalizer setting
whilst watching the TV using the
sound Smart control.
You can change the picture type whilst
watching the TV using the picture Smart
control.
Press the sound Smart control to
page through the different equalizer
settings and select the one you
want.
Press the picture Smart control to
page through the different picture
types and select the one you want:
SOFT, NATURAL, RICH or USER.
Picture Features
In the picture menu use the
Features Menu (Purple button)
To select Features menu press
the menu button and using the
Program up and down buttons
select Features.
Program down button to select
PICTURE FEATURES and
press OK.
In this menu you can adjust the
picture quality features.
You can also select the Features
menu directly by pressing the
purple button on the remote
control.
Use the Program up and down
buttons to select your desired
picture feature and use Volume
up and down buttons to adjust
this feature.
The Features menu allows you
to set up the following:
CHILD LOCK
BLUE BACK
DEGAUSS (opt.)
AV OUT
NOISE REDUCTION: You can
reduce the noise effects in the
pictures by selecting low, medium
or high.
15
LANGUAGE
TIMER
CTI (Colour Transient Improvement):
You can improve the colour transitions in
the picture by selecting ON or OFF.
Use the Program up and down
buttons to select the feature you
wish to change and use Volume
up and down buttons to adjust
this feature.
PICTURE FEATURES
NOISE REDUCTION
CTI
LOW
ON
IMPORTANT NOTE: Your TV has Digital
Comb Filter and DLTI (Digital Luminance
Transient Improvement) features to improve
picture quality. These features are set ON
and they can not be changed by the end user.
FEATURES
CHILD LOCK
BLUE BACK
DEGAUSS
OFF
OFF
OFF
TV
SCART SOURCE
LANGUAGE
TIMER
AV2 & AV3
Child Lock: Using the Child
Lock, you can lock any Program
you want so that adult channels
can not be watched by children.
Language: You can select one of the 10
languages by pressing OK button in the
language selection.
Timer: Use Program up and down
buttons to select Timer in the features
menu. Using the Timer fuction, you can
switch to a specific programme at a pre-
programmed time or you can turn your TV
off at the time you want your TV to be
turned off.
You can cancel child lock any time
you want. To cancel Child Lock,
select Child Lock as OFF when
you are watching that program.
Blue Back (Optional): When there
is no broadcast, you can select the
background purely blue instead
of snowy picture.
Press OK to access the Timer menu.
TİMER
Select blue back as ON.
CLOCK
17:10
--/--
--/--
P05
16
ON TIME
OFF TIME
PROGRAM NO
Degauss (Optional): If you leave your TV
on stand-by mode for a long time or
because of strong electro-magnetic field
sources, there may be cloudy effects over
the picture.
Clock: Use the numeric buttons to set the
real time.
To prevent such effects select DEGAUSS
and press Volume up button.
DEGAUSS will be ON for a short time,
the screen will be cleaned and DEGAUSS
will be OFF again.
On Time: Use the numeric buttons to set
the time that you want your TV to be turned
on (TV should be on stand-by mode).
Off Time: Use the numeric buttons to set
the time that you want your TV to be turned
off (Stand-by mode).
Scart Source: You can select the output
from your TV to the devices connected to
your 2nd and 3rd scarts. So if you want to
record or copy the program you are
watching, you should output this program
to AV2 or AV3, inputs.
Program No: Use the numeric buttons to
set the programme number that will be
shown when you set the On Time.
The following options are possible
• TV¡AV2 & AV3: The current program
you are watching,
• TUNER ¡AV2 & AV3: The program you
have last selected,
• AV1, AV2, AV3, AV3-S, AV4, AV4-
S¡AV2 & AV3: The devices connected to
these inputs; are output to the 2nd and 3rd
scarts.
Note: 3rd. Scart is optional.
Picture format
You can adjust the picture format
Subwoofer (optional)
A sub woofer speaker can be fitted
within the TV case as an option
depending to the model.
of your TV according to the
program format you are watching.
Press the “16:9” button to change
the Picture format.
For 33”(84cm) TV sets there
is an external subwoofer (optional)
to be fixed as shown below.
Avaible formats are 16:9, 14:9, 4:3,
Letterbox, Subtitle1, Subtitle2 (Optional).
16:9 and 14:9 are the screen formats of
widescreen TV sets (28” SF/PF, 32” SF/PF).
The TV will automatically switch to this
format if it detects 16:9 format from the
SCART inputs.
16:9 Colour television
4:3 Colour television
R
17
AUDIO OUT
L
AV3
4:3 TV
picture format.
AV1
AV2
Select Sound menu and press
Program down button to access
Sound Features menu.
14:9 TV
picture format.
Press Program down button and
select SUBWOOFER line.
16:9 TV
picture format.
Press the Volume up button to
switch the Subwoofer on or off.
L Box (Letter box), Useful for watching
video, some film formats and Pal-Plus format.
SOUND FEATURES
SOUND MODE
AVL
SUBWOOFERL
DYNAMIC BASS
EQUALIZER
SPATIAL
ON
ON
ON
Subtitle1:If you can not see subtitles at the bottom of the
screen, especially when watching 4:3 pictures in Letter box
format, select Subtitle1.
Note: If your TV has Subwoofer and if
you turn on the Dynamic Bass, the
subwoofer will also automatically
turn on. You can not turn your subwoofer
off when Dynamic Bass is on.
Subtitle2:When Subtitle1 is not enough,select the picture
format as Subtitle2.
Setup menu (blue button)
Program table menu (yellow button)
These two menus are explained under
‘Tuning the TV’and “Program Organising”.
OTHER FEATURES
PAT (Picture and Text)
In the double window function, you can also
display the teletext screen in the second
window. Press the PAP button to see the
double window function and then press the
purple button on the remote control to see the
PAT mode.
Picture freeze
When you press "FREEZE" key on
your remote control, the picture on
the screen becomes fixed. To get
out of the position, press the same
key again.
FREEZE
TeleText
Mode
Picture scan (Optional)
You can scan the programmes
starting from the current programme
you have been watching, on the
screen within twelve frames. Press
"SCAN" key on your command
for this.
SCAN
To view the desired one from these
programmes, press "OK" during
scanning. The programme you
chose will appear on the screen. To
exit, press "SCAN" key.
18
Blank programmes will not be
scanned.
Zoom Function (Optional)
Pressing OK button zooms in to the
picture. Zoom function is
performed towards the center of
the picture.
There are 3 steps Zoom, each time
you press the OK button.
ZOOM1, ZOOM2, ZOOM3.
You can also scroll on the picture
by pressing Program up or down
and Volume up and down buttons.
Using Teletext
Teletext is an information system that displays
text on your TV screen. Using the teletext
control buttons you can view pages of
information that are listed in the teletext
index.
TV/text mix
To view a page of text whilst
watching a TV programme press
theMIX
button. The text will be
superimposed over the TV
programme.
Please Note
No on screen display is available in text mode.
The contrast, brightness and colour cannot be
changed but the volume control is still
available.
Press the MIX button again to return
to the text page.
Page search whilst watching TV
In Text mode press theUpdate
button. The TV will return to TV
mode with the text page number in
the top left hand corner of the
screen.
19
To enter Text mode
Please Note
Make sure the TV channel you are watching
transmits teletext.
Enter the page number you want
using the Numeric buttons.
Press theTV/TEXTbutton. The text
page will appear, normally the index
page.
The top line of the text page will
appear whilst the text searches for
your page. When the page is found
the number will remain in the top
left hand corner of the screen.
To exit Text mode
Press the TV/TXTbutton. The TV
will return to the channel you were
watching.
Press the Update button to view
your selected page of text.
To select a page of text
Find the number of the page in the
index and enter it using the
Numeric buttons. The number of
the page will appear in the top left
hand corner of the screen.
Double height text
If you have difficulty reading the
text on the TV you can double the
height of the text.
The page counter will search for your
page. When it finds it, the page will
be displayed.
FREEZE
Press the Double height button.
The top half of the page will be
displayed in double height text.
To move to the next page of text
press the Program up button.
FREEZE
Press the Double height button
again. The bottom half of the page
will be displayed in double height
text.
To move to the previous page press
the Program down button.
FREEZE
PAT
Press the Double height button
again to return to the full page.
To return to the index page press the
P100 button.
Page Stop
If the page of text you have selected
To reveal information
Press the Rev button to reveal
concealed information (quiz
answers etc.).
SCAN
contains sub pages, these sub pages
will automatically be displayed in
order with a delay to allow you to
read the page.
SCAN
Press the Revbutton again to
conceal the information again.
To stop the move to the next sub
page press theHOLDbutton. STOP
will appear in the top left hand
corner.
Clock
Press the Sub button, whilst
watching a TV program , to
display the time.
To continue moving through the sub
pages press theHOLD button again.
Fast text
At the bottom of the teletext screen is a row
of subject headings in red, green yellow and
blue.
20
To select a sub page
If the page of text you are viewing
contains sub pages, the number of
the sub page you are on and the total
number of sub pages is displayed on
the right of the screen i.e. 1/7.
The remote control has a row of coloured
buttons corresponding to the row of
coloured subjects on the screen.
To select a sub page press the SUB
button. The number in the top left
hand corner will be replaced by S
followed by 4 asterisks.
Pressing one of the coloured buttons will
take you directly to the page
corresponding to the subject heading.
Enter the number of the sub page,
using theNumeric buttons in the
format S0001 for sub page 1.
Toptext (optional)
5
At the bottom of the teletext screen is a row
of subject headings in yellow and blue.
Pressing yellow or blue buttons on the
remote control, selects the related Subject.
Next page can be selected by pressing the red
button and previous page can be selected
by pressing the green button.
The teletext will search for the sub
page. This may take some time. To
return to the TV whilst the teletext
is searching press the Update
button.
Note: Fastext and Toptext features are not
available in every program.
When the page number is found it
will appear in the top left hand
corner of the screen.
Press the Update button again to
view the text page.
Connecting external
equipment
You can connect a wide range of audio and
video equipment to your TV.
Via RCA lead (optional)
Make sure the TV and video recorder are
both switched off.
Connecting a video
recorder
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
video recorder and plug the other end into
the video and audio in sockets of the TV.
Via SCART
Make sure the TV and video recorder are
both switched off.
21
Plug one end of the SCART lead (not
supplied) into the back of the video recorder
and the other end into one of the SCART
sockets on the back of the TV.
If the sound is in mono use the Audio Input
L. In the SOUND menu select MONO.
Press the AV button repetitively
and select the AV3 (AV4 optional)
mode.
AV
Switch on the video recorder and the TV.
Press the AV button on the remote
control to select AV1, AV2 or AV3
(optional) to correspond with
SCART socket you are using on
the back of the TV.
Please note:
When using RCA lead, you should select AV4
in 3 Scart models and AV3 in 2 Scart models.
AV
Please note:
You can connect a RGB external equipment
via Scart 3 (optional) or Scart 1. It is necessary
to you use full Scart cable for this purpose.
Select the video outputs of external device
by using its menu to RGB if it’s avaible.
Via aerial socket
Make sure the TV and video recorder are
both switched off.
S-Video Player
If you have an S-Video player you can
connect it to SCART socket 3 (optional)
via an adaptor from scart to S-Video/RCA
audio (not supplied).
Unplug the aerial lead form the TV and plug
it into the aerial socket on the video
recorder (if fitted).
Press the AV button repetitively
to select AV3-S.(3 scart models only)
AV
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket of the TV.
Via RCA lead and S-Video socket
You can also connect it through the
S-Video socket of the TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
22
See ‘Tuning the TV’ and carry out the tuning
procedure for the video recorder test signal.
Select a programme number 0.
Press the AV button repetitively
to select AV3-S or AV4-S (optional).
AV
AV3/AV4
R
L
R
VIDEO
AUDIO OUT
L
AV3
AV1
AV2
AV3/AV4
R
L
VIDEO
S-Video In
Via RCA lead (optional)
Make sure the TV and DVD player are both
switched off.
Connecting a DVD
player
Via SCART
Make sure the TV and DVD player are both
switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
DVD player and plug the other end into the
video and audio in sockets of the TV.
Plug one end of the SCART lead (not
supplied) into the back of the DVD player
and the other end into one of the SCART
sockets on the back of the TV.
Press the AV button repetitively and
select the AV3 (AV4 optional) mode.
AV
Switch on the DVD and the TV.
Via RCA lead and S-Video socket
You can also connect it through the
S-Video socket of the TV.
Press theAV button on the remote
23
control to select AV1, AV2 or AV3
correspond with SCART socket
you are using on the back of the TV.
AV
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
Note: Scart 1 and Scart 3 (optional)
will give you RGB picture quality.
For DVD connections RGB capable scart
sockets (AV1 or AV3) are recommended.
Press the AV button repetitively
to select AV3-S or AV4-S (optional).
AV
AV3/AV4
R
L
R
VIDEO
AUDIO OUT
L
AV3
AV1
AV2
AV3/AV4
R
L
VIDEO
S-Video In
Connecting a decoder
Via SCART
Make sure the TV and decoder are both
switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
decoder and plug the other end into the video
and audio in sockets on
the TV.
Press the AV button repetitively and
select the AV3 mode (AV4 optional).
Plug one end of the SCART lead (not
supplied) into the back of the decoder and the
other end into the SCART 1
on the back of the TV.
Please Note
You can record from one external device to
another via scart sockets. You should select
the source and destination of video using
FEATURES menu. If you select the source
as AV3/AV3-S or AV4/AV4-S (optional) you
will have a “ WARNING: COPY
Switch on the decoder and the TV.
Press the AV button on the remote
control to select AV1.
AV
24
FUNCTION ACTIVE” message on the
screen. You will not have picture at
AV4/AV4-S if you select source
Via RCA lead
Make sure the TV and decoder are both
switched off.
AV3/AV3-S or vice versa.
You can connect NTSC supported equipment
to the TV via the SCART sockets and
adjusting the colour via the PICTURE
menu.
Note: For Decoder connection Via RCA
lead your Decoder device should have the
tuner built in.
AV3/AV4
R
AUDIO OUT
L
AV3
AV1
AV2
Connecting TV with video and satellite/digital
receiver
ANT IN
Scart 1 TV IN/OUT
Scart 2 AUXIN
Scart Socket
ANT OUT
Antenna
socket
DIGITAL SATALLITE RECEIVER
VIDEO RECORDER
BEHIND THE TELEVISION
25
Connecting TV with camcorder
AV1/AV2/AV3
AV3
(3 scart models only)
AV3/AV4
R
L
VIDEO
S-Video In
S-Video camcorder
Camcorder
Connecting TV games and computer
AV1
AV3/AV4
R
L
VIDEO
S-Video In
S-Video TV Game Player
Help and service tips
No sound
TheTVdoes not work
Make sure it is plugged into the mains supply
and switched on.
•
Is the sound muted? Press the Mute
button.
•
•
Is the volume turned down?
Are there headphones connected?
Poorpicture
•
•
Is the aerial plugged in?
Sound coming from only one
speaker
•
If you are using a set top aerial is it
properly aligned for the best signal.
Make sure the aerial is not to close to
neon lights, loudspeakers etc.
Try changing the direction of the outdoor
aerial. High buildings and mountains can
cause ghost pictures or double images.
The picture quality may be reduced by
connecting two external sources at once.
Disconnect one of the sources.
Is the balance set to one side? See the
sound menu.
If you have external speakers, has one of
them become disconnected.
•
•
•
No response to the remote control
•
•
•
•
Try changing the batteries.
Is there an obstruction between the
remote control and the sensor on the TV.
26
Adjust the fine tuning.
If nothing works
No picture
If you have tried the above solutions and none
seem to work, try switching the unit off and
on again.
•
•
•
Is the aerial plugged in properly?
Is the aerial lead damaged?
Are all the plugs in the aerial lead fitted
correctly?
If this does not work contact your supplier or
TV repair technician. Never attempt to
repair a defective TV yourself.
•
Have you pressed the correct buttons on
the remote control?
Technical specifications table
Picture tube 28”
28”
28”
29”
29”
32”
32”
33”
4:3
size/typee
4:3
16:9 SF 16:9 PF 4:3 SF 4:3 PF 16:9 SF 16:9 PF
Screen size
70 cm 70 cm 70 cm 72 cm 72 cm 82 cm 82 cm 84 cm
66 cm 66 cm 66 cm 68 cm 68 cm 77 cm 77 cm 80 cm
2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W
90 W 100 W 100 W 105 W 105 W 110 W 110 W 125 W
Visible
screen size
Sound Output
(%10 THD)
Power
consumption
Stand by
Power
consumption
5 W
5 W
5 W 5 W
5 W
5 W
5 W 5 W
optional optional optional optional optional optional optional optional
20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W
Subwoofer
27
Dolby
Virtual
optional optional optional optional optional optional optional optional
SF : Superflat picture tube
PF : Pureflat picture tube
16:9: Widescreen TV
4:3 : Conventional TV
Please note:
Using a subwoofer causes 20 W extra power consumption and supplies maximum 20 W
extra sound output.
General technical specifications
Power Supply
AC: ................................................... 230-240V50Hz
Number of preset programmes ......... 100
RFAerial input .................................... 75 ohm (unbalanced)
Speaker empedance ........................... 8 ohm
Sound Systems...................................... Mono/Stereo/NICAM (optional)
Batteries ............................................ 2x AAA
Receiving channels ............................... VHF (Band I Channels 2-4)
............................................................. VHF (Band III Channels 5-12)
............................................................... UHF(Channels 21-69)
.............................................................. Cable TV (S1-S20/S21-S41)
Please note: Your TV set is produced to receive only “one “ of this colour and sound system
options which is based one your countries norms and can not be changed by user except
BG/DK and BG/LL´ if both systems are avaible to receive (BG or DK and BG or LL´). Please
refer to “Tuning the TV”.
BRN.801
|