SPECIFICATIONS
Standards
IMO Resolution A.817(19), IEC 61174 ed2
Power Supply
Display Unit:
Display Unit
FEA-2107: MU-201CE, 20.1" color LCD, SXGA (1280 x 1024 pixels)
FEA-2807: MU-231CE, 23.1" color LCD, UXGA (1600 x 1200 pixels)
Windows XP
IHO/S-57 v.3 vector chart, ARCS raster chart, C-MAP CM93 ed3*
*available in the near future
100 - 230 VAC, 1 ø, 50/60 Hz
100 - 230 VAC, 1 ø, 50/60 Hz
24 VDC
Processor Unit:
LAN Adapter:
B Adapter:
Operating System
Useable Charts
24 VDC
Environment (IEC 60945 test method)
Presentation Modes
True/Relative Motion Noth-up, True/Relative Motion Course-up
Relative Motion Head-up, Relative Motion Route-up
Temperature
-
+
All Units:
15˚C to 55˚C
Display of data
Own ship :
Route :
Equipment List
Position, SOG, COG, Heading
Planned route, Monitoring route
Standard
1. Display Unit FEA-2107: MU201CE, FEA-2807: MU-231CE 1 unit
2. Control Head RCU-018 or
Trackball Control Unit RCU-015 (Specify when ordering) 1 unit
3. Processor Unit EC-1000C
ARPA targets :
Others :
Range, Bearing, Speed, Course, CPA and TCPA
EBL, VRM, Parallel index line, Cursor position, Navigation
and pilot data notebook
1 unit
1 unit
1 pc
1 pc
1 pc
1 pc
1 pc
1 set
Route/Waypoint
Route: more than 100 routes
4. LAN Adapter EC-1010
Waypoints: 200 waypoints /route
5. Power Supply Cable for Processor Unit, 1.5 m
6. Power Supply Cable for Display Unit, 1.5 m
7. DVI Cable between Display Unit and Processor Unit, 5 m
8. Cable between Control Unit and Processor Unit, 10 m
9. LAN Cable, 2 m
10. Standard Spare Parts and Installation Materials
Option
1. LAN Adapter EC-1010
2. B Adapter EC-1020 for equipment with analog interface
3. Remote Control Unit RCU-016
4. Cable between Control Unit and
Remote Control Unit 03S9610, 1.5/10/20/30 m
5. Hub HUB-100
6. Radar Overlay Kit for FAR-21x5 series and FAR-28x5 series
7. Video Card for Conning Display Unit
8. Cable between Control Unit and Processor Unit, 20/30 m
9. DVI Cable between Display Unit and Processor Unit, 10 m
10. Armored LAN Cable OP03-186-10/20/30
11. Printer PP-510
Voyage Calculation
The following data can be calculated
Range/Bearing to destination, TTG, ETA, Fuel consumption
Route Navigation Monitoring Off track, Waypoint, Arrival, Grounding, Depth
Alarms
Off track, Channel limit, Waypoint approach, Depth
Other Functions
Night/day presentation colors, ARPA target display, Radar overlay,
User chart function, Position optimization, MOB, Log book,
Pilot data function, Track control system (TCS)*
* Please contact the local dealers in your area for details.
Interface
Input/output
AIS :
IEC 61162-2 (ABM, BBM)
Radar signal :
Input
Ethernet 100 Base-TX or RAW Video
Gyrocompass :
IEC 61162-1 (HDT) or Synchro
SDME (Speed log) : IEC 61162-1 (VBW) or Pulse type
EPFS :
Echo Sounder :
Anemometer :
IEC 61162-1 (GLL, GGA, VTG, ZDA, DTM)
IEC 61162-1 (DBT, DPT)
IEC 61162-1 (MWV)
Water temp Indicator : IEC 61162-1 (MTW)
12. USB-Parallel Printer Cable for PP-510
13. Hand Grip
14. Bracket
Current Indicator :
Output
IEC 61162-1 (VDR)
15. Connection Stand
16. Pedestal slim/standard Type
Alarms :
Printer :
Relay output
Parallel
Option
Shipyard Supply
INTERCONNECTION DIAGRAM
AIS
Control Unit
Display Unit
MU-201CE/
231CE
LAN Adapter
EC-1010
Serial
Track Pilot *
250V-TTYCS
AMWSS
Route Backup
GPS Navigator
Anemometer
Echo Sounder
Log/Dual Axis Log
Gyrocompass
Engine Control
Water Temp Indicator
Alarms
Ethernet 2.5 m
RCU-018
or
With 8 ports
5/10 m
Processor Unit
EC-1000C
Ethernet
10/20/30m
*
Up to two LAN
adapters connectable
HUB
HUB-100
24 VDC
10/20/30 m
1.5 m
10/20/30m
250V-TTYCS-1T
RCU-015
x2
HUB
HUB-100
Gyrocompass (Synchro)
Log (200 p/nm)
Alarms
ECDIS for 2nd station
B Adapter
1.5 m
250V-
5 m
x8
x8
EC-1020
Radar/ARPA*
FAR-21x7series
FAR-28x7series
Conning Monitor
TTYCS-1
20.1" color LCD
23.1" color LCD
With18 ports
Printer
PP-510
Analog Sensors
Remote Control Unit
RCU-016
250V-TTYCS/
MPYC
*Up to four systems can
be connected
24 VDC
100-230 VAC
Digitizer
*Please contact the local dealers in your area for details.
Display Unit
Processor Unit
Trackball Control Unit
MU-201CE 18.3 kg 40.4 lb
EC-1000C 15 kg 33.1 lb
RCU-015 2.4 kg 5.3 lb
6-
8
534 21.0"
506 19.9"
110 4.3"
4-
4
Bracket
(option)
35 1.4"
50 2.0"
160 6.3"
526 20.7"
Hand Grip
(option)
287 11.3"
352 13.9"
490 19.3"
570 22.4"
440 17.3"
470 18.5"
89 3.5"
179 7.1"
Control Head
Remote Control Unit
MU-231CE 23.5 kg 51.8 lb
RCU-018 3.7 kg 8.2 lb
RCU-016 2.4 kg 5.3 lb
598 23.5"
110 4.3"
4-
4
Bracket
(option)
308 12.1"
398 15.7"
4-
4
39 1.5"
54 2.1"
92 3.6"
35 1.4"
50 2.0"
89 3.5"
160 6.3"
287 11.3"
352 13.9"
590 23.2"
Hand Grip
(option)
554 21.8"
TRADE MARK REGISTERED MARCA REGISTRADA
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
05015U Printed in Japan
FURUNO U.S.A., INC.
Camas, Washington, U.S.A.
Phone: +1 360-834-9300
Fax: +1 360-834-9400
FURUNO ESPAÑA S.A.
Madrid, Spain
Phone: +34 91-725-90-88
Fax: +34 91-725-98-97
FURUNO SVERIGE AB
Västra Frölunda, Sweden
Phone: +46 31-7098940
Fax: +46 31-497093
FURUNO (UK) LIMITED
Denmead, Hampshire, U.K.
Phone: +44 2392-230303
Fax: +44 2392-230101
FURUNO DANMARK AS
Hvidovre, Denmark
Phone: +45 36 77 45 00
Fax: +45 36 77 45 01
FURUNO FINLAND OY
Espoo, Finland
Phone: +358 9 4355 670
Fax: +358 9 4355 6710
The future today with FURUNO's electronics technology.
Catalogue No. L-161b
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00
Fax: +33 5 56 13 48 01
FURUNO NORGE A/S
Ålesund, Norway
Phone: +47 70 102950
Fax: +47 70 127021
FURUNO POLSKA Sp. Z o.o.
Gdynia, Poland
Phone: +48 58 669 02 20
Fax: +48 58 669 02 21
9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
TRADE MARK REGISTERED
MARCA REGISTRADA
F
E
A T
U
R
E
S
o
f
E
C
D
I
S
sThe electronic chart can be overlaid with a variety of navigation data such as Radar echo
images, ship’s position, heading, speed and others to facilitate safe and efficient navigation.
sCompatible with ENC (S57 Edition 3) charts, ARCS charts and C-MAP CM93 ed3*
*available in the near future
sComplies with the following IMO and IEC regulations:
• IMO A.817(19)
• IMO MSC.64(67) Annex 5
• IMO A.694(17)
• IEC 60945 edition 4
• IEC 61162-2 edition 1
• IMO MSC.86(70) Annex 4
• IEC 61174 edition 2
• IEC 61162-1 edition 2
ENC IHO S57 Edition 3
sFlexible expandability allows the ECDIS to be networked with radar/ARPA, positioning
equipment, autopilot and others to consolidate the navigation system
sDisplays 200 AIS targets
sHigh-resolution color LCD
When connected to an optional AIS transponder,
the FEA-2107/2807 can store up to 1,000 AIS
targets information in its storage buffer, and
displays up to 200 AIS targets within the user-
defined range on the display. This provides
operators with another solution for observation
of other craft.
The use of 20.1"/23.1" high-resolution SXGA/UXGA LCDs
provide crystal clear presentations of navigation
information, such as marks, lines and waypoints.
The LCDs also allows for installation where space is limited.
sErgonomically designed control panel provides
ease-of-use
The ergonomically designed control panel consists of
a trackball, a thumbwheel and a keyboard. The logically
arranged keyboard provides intuitive operation. Optionally,
the compact control head only with a trackball and
a thumbwheel is available for space-saving installation.
Sleeping AIS Target Activated Target Selected Target
Lost Target
Dangerous Target
sStreamlined design
A f l e x i b l e E t h e r n e t n e t w o r k
a l l o w s f o r f u t u r e e x p a n d a b i l i t y
The color scheme of the optional
pedestal is a stylish pearl white and
gray.The streamline design fits
perfectly in the modern bridge.
Optional pedestal
Palm control unit
sUser-customizable chart drawing function sNavigation data for the past 12 hours
can be recorded
(The data to be recorded includes: time, ship’s position,
GPS correction data, ship’s heading, ship’s speed)
sRoute planning applicable to both
Mercator’s sailing and great-circle sailing
sTrue Motion and Relative Motion modes are
available
sTrack Control System when connected
with autopilot (Option)
sNavigation data is shared within an Ethernet network
The 100 Base-T Ethernet is utilized to link
this ECDIS with up to four sets of radar/ARPA
FAR-21x7/28x7. This link gives high-speed
navigational data sharing within the system
and allows operators to choose either a single
station system or a total Integrated Navigation
System (INS).
Ethernet 100 Base-TX
Autopilot
SDME
GPS Navigator
P
R
E
S
E
N
T A T
I
O
N
S
o
f
E
C
D
I
S
N a v i g a t e s a f e l y a n d e f f i c i e n t l y w i t h
t h e E C D I S r o u t e p l a n n i n g a n d m o n i t o r i n g
Status bar
• Presentation mode
Own ship’s information
• Ship’s position
• Heading
• Course over ground (COG)
• Speed over ground (SOG)
• Vector mode and vector time
• Planned route, chart name
• Name of pilot data
Radar overlay
Radar echo image overlay is optionally available in
the FEA-2107/2807. This function gives the exact match in
scale and presentation of the chart and radar echo image.
This greatly helps the operator’s observation and enhances
their accuracy.
• Source of target data
• Predictor time
AIS information
Heading
Cursor
• Name
• Course
• IMO MMSI number • CPA
• Position
• Speed
• TCPA
• Range
Own ship’s marker
AIS symbol
UTC
(coordinated universal time)
Planned route
Cursor information,
Distance and bearing
between own ship
and cursor
WTP
(Waypoint)
Buoy
Route planning
The operators can plan and
determine the precise route with
ease, while studying the chart
data on the screen. A route can
be altered in minute detail, and
the changed route can be saved
for later use.
Radar overlay dialog box
Operators can have controls for
adjustment of the radar image - gain, sea
clutter, rain clutter, echo trail, interference
rejector, echo stretch and noise rejector.
Conning display
A variety of navigation
information, which is input
from up to sixteen onboard
sensors, can be graphically
displayed on thee screen.
Up to eight sensors provide
the analog data, and the other
eight provide the serial data.
The information is displayed in six predefined place
where the operators can arrange the layout.
Typically, information on the conning display is received
from the following sensors:
sPosition sensors sRate of turn gyro sRudder
sWind sensor
sGyro
sLog/Dual-axis log sPropellers
sEcho sounder sThrusters
Day/night presentation
Data display
Antigrounding
When the cursor is placed upon any mark on the electronic
chart, related information about the object such as a buoy,
lighthouse, sunken vessel, etc., will be shown in the data
cell. Additionally, other navigational information including
both own ship’s navigational as well as other ship’s
information from ARPA can also be presented.
This function informs the operator beforehand of shallow
coastal water and other sea conditions that could
contribute to the ship going aground.
The information about the sea areas is acquired from
the electronic chart and ship’s draft data is preset in own
ship’s information so that possible strand can be avoided.
|
Hotpoint GW38P User Manual
Hitachi PW1 User Manual
Heath Zenith SL 4300 User Manual
GE EPM 5300 User Manual
GEA Nu Con Cooktop JGP656 User Manual
Fujitsu Mainboard D1562 User Manual
Electra Accessories EL 305C User Manual
Dell E207WFP User Manual
Cypress NoBL CY7C1472BV25 User Manual
Asus P5N7A VM User Manual