Fujitsu Computer Monitor B17 5 ECO User Manual

Display  
B17-5 ECO/B19-5 ECO  
Operating Manual  
English  
Do you have ...  
... any technical questions or problems?  
Please contact:  
our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the  
contact details on our website at: "http://ts.fujitsu.com/support/" )  
your sales partner  
your sales ofce  
The latest information about our products, useful tips, updates etc. is available  
FUJITSU B17-5 ECO / B19-5 ECO  
Operating Manual  
1
3
7
14  
23  
Notes regarding the DIN EN ISO  
13406-2 standard  
25  
26  
VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association.  
Copyright © Fujitsu Technology Solutions GmbH 2009  
All rights reserved, including rights of translation, reproduction by printing, copying  
or similar methods, in part or in whole.  
Offenders will be liable for damages.  
All rights reserved, including rights created by patent grant or registration of a utility model or design.  
Subject to availability and technical modications.  
No liability for content or printing errors.  
Contents  
Contents  
Your LCD screen... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Transporting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Cleaning the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Unpacking and checking the delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setting up the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Setting up an ergonomic video workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Adjusting the height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Adjusting the inclination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Adjusting the rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Adjusting portrait format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Removing monitor base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Connecting the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting cables to the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting cables to the computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Switching the device on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Notes on power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Changing the monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Changing the monitor settings with the buttons of the control panel . . . . . . . . . . . . . . . . . . . . . . 16  
Changing the monitor settings using the OSD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Notes regarding the DIN EN ISO 13406-2 standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Technical specication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
VESA-DDC-compatible VGA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Preset operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Most frequent operating modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
SUB D port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
DVI-D port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
A26361-K1317-Z220-1-7619, edition 2  
Contents  
A26361-K1317-Z220-1-7619, edition 2  
Your LCD screen...  
Your LCD screen...  
has a whole range of useful features and functions, e.g.:  
TFT display (Thin Film Transistor; active matrix)  
minimal space requirements thanks to slim casing  
optimum ergonomic characteristics (totally distortion-free, excellent picture  
denition and colour purity right into the corners)  
high degree of brightness and good contrast  
high resolution (1280 x 1024)  
presentation of up to 16.7 million colours (in conjunction with an appropriate display adapter)  
automatic scanning of horizontal frequencies from 30 to 83 kHz and refresh rates  
(vertical frequencies) from 55 to 76 Hz (absolutely icker-free)  
digital screen controller with microprocessor for storing 28 different display modes  
freely adjustable colour alignment for matching the screen colours to the  
colours of various input and output devices  
convenient operation via integrated OSD (On-Screen-display) menu  
VESA-DDC compatibility  
VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –  
Mounting device for swivel arm and wall bracket  
Plug&Play capability  
power management for reducing power consumption when the computer is not in use  
Compliance with the recommendations according to TCO  
the monitor fullls all GS ("Geprüfte Sicherheit", Certied Security) requirements.  
This operating manual contains important information you require to start up and run your LCD monitor.  
A graphics card (display adapter) with VGA interface or a digital display adapter with  
DVI interface is required to control the LCD monitor. The monitor processes the data  
supplied to it by the display adapter. The display adapter or the associated driver software  
is responsible for setting the modes (resolution and refresh rate).  
When putting the monitor into operation for the rst time, the screen display should be  
optimally adapted to the display adapter used and adjusted in accordance with your  
Target group  
You don’t need to be an "expert" to perform the operations described here. However, please observe  
the safety information given in the operating instructions for the computer and in this manual.  
In the event of any problems occurring, please contact your sales outlet or our Help Desk.  
A26361-K1317-Z220-1-7619, edition 2  
1
 
Your LCD screen...  
Further information  
Details of how you set the resolution and refresh rate are provided in the documentation  
for your display adapter and the associated driver software.  
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.  
Because of the technology used (active matrix) an LCD monitor provides a totally  
icker-free picture even with a refresh rate of 60 Hz.  
Notational conventions  
Pay particular attention to text marked with this symbol. Failure to observe  
these warnings could pose a risk to health, damage the device or lead  
to loss of data. The warranty will be invalidated if the device becomes  
defective through failure to observe these warnings.  
Indicates important information for the proper use of the device.  
Indicates an activity that must be performed  
Indicates a result  
This font  
indicates data entered using the keyboard in a program dialogue or  
command line, e.g. your password ((Name123) or a command used to  
start a program (start.exe)  
This font  
indicates information that is displayed on the screen by a program, e.g.:  
Installation is complete.  
This font  
indicates  
terms and texts used in a software interface, e.g.: Click on Save  
names of programs or les, e.g. Windows or setup.exe.  
"This font"  
indicates  
cross-references to another section, e.g. "Safety information"  
cross-references to an external source, e.g. a web address: For more  
information, go to"http://ts.fujitsu.com"  
Names of CDs, DVDs and titles or designations of other materials, e.g.:  
"CD/DVD Drivers & Utilities" or "Safety" Manual  
Abc  
F10  
indicates a key on the keyboard, e.g:  
This font  
indicates terms and texts that are emphasised or highlighted, e.g.: Do  
not switch off the device  
2
A26361-K1317-Z220-1-7619, edition 2  
 
Important notes  
Important notes  
INoteosrtantnotes  
m
p
In this chapter you will nd information regarding safety which it is essential to  
take note of when working with your device.  
Safety instructions  
This device complies with the relevant safety regulations for data processing equipment,  
including electronic ofce machines for use in an ofce environment. If you have any  
questions, contact your sales outlet or our Help Desk.  
The display surface of the device is sensitive to pressure and scratches. You should therefore  
be careful with the display surface in order to avoid lasting damage (scratches).  
If the device is brought into the installation site from a cold environment, condensation  
can form. Before operating the device, wait until it is absolutely dry and has reached  
approximately the same temperature as the installation site.  
When installing and operating the device, please observe the notes on environmental  
conditions in Chapter "Technical specication", Page 26 as well as the instructions in  
To ensure sufcient ventilation, the air inlet and outlet openings of the device must be kept clear.  
The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.  
Make sure that the local mains voltage is neither higher nor lower than this range.  
Ensure that the power socket on the device and the mains outlet are freely accessible.  
The ON/OFF switch does not disconnect the monitor from the mains voltage. To disconnect  
fully from the mains supply, disconnect the power plug from the socket.  
The device is equipped with a power cable that complies with safety standards.  
Use the supplied power cable only.  
Lay the cables in such a way that they do not create a hazard (danger of tripping)  
and cannot be damaged. When connecting the device, observe the relevant  
No data transfer cables should be connected or disconnected during a thunderstorm.  
Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get  
inside the device (danger of electric shock, short circuit).  
The device is not waterproof! Never immerse the device in water and protect  
it from spray water (rain, sea water).  
In emergencies (e.g. damaged casing, elements or cables, penetration of  
liquids or foreign matter), switch off the device, disconnect the power plug and  
contact your sales outlet or our Help Desk.  
Repairs to the device must only be performed by qualied technicians. Unauthorised opening  
and incorrect repair may greatly endanger the user (electric shock, re risk).  
Only use the screen resolution settings and refresh rates specied in Chapter  
"Technical specication", Page 26. Otherwise you may damage the device. If you  
are in any doubt, contact your sales outlet or our Help Desk.  
Use a screen saver with moving images and activate the power management for  
your monitor to prevent still images from "burning in".  
If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°.  
A26361-K1317-Z220-1-7619, edition 2  
3
 
Important notes  
The device must only be operated in landscape mode (0°) and portrait mode (90°). The  
control buttons are located in the middle of the bottom of the monitor in landscape mode  
(0°) and at the left-hand side of the monitor in portrait mode (90°).  
Store this manual close to the device. If you pass the device on to third  
parties, you should pass this manual on with it.  
We recommend that you place your device on a durable, non-slip surface. In view  
of the many different nishes and varnishes used on furniture, it is possible that the  
feet of the device may mark the surface they stand on.  
To ensure sufcient ventilation, the air supply and air outlet openings of  
the monitor must never be blocked.  
Power cable  
Use the supplied power cable only.  
Use the following guidelines if it is necessary to replace the original cable set.  
The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.  
The cable has to be HAR-certied or VDE-certied. The mark HAR or  
VDE will appear on the outer sheath.  
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be  
used. For devices which sit on the oor, only SJT type cable sets may be used.  
The cable set must be selected according to the rated current for your device.  
If necessary, replace the original power cable with a regular grounded 3-core mains lead.  
Transporting the device  
DTR  
r
e
a
vt  
n
riacsneps,o  
p
rtortiaotnion  
a
t
Transport all parts separately in their original packaging or in a packaging which  
protects them from knocks and jolts, to the new site.  
Do not unpack them until all transportation manoeuvres are completed.  
If the device is brought from a cold environment into the room where it will be used,  
condensation may occur. Before operating the device, wait until it is absolutely dry  
and has reached approximately the same temperature as the installation site.  
Cleaning the device  
Switch off the device and unplug the power plug.  
Do not clean any interior parts yourself, leave this job to a service technician.  
Do not use any cleaning agents that contain abrasives or may corrode plastic.  
Ensure that no liquid enters the device.  
The display surface of the device is sensitive to pressure and scratches. Clean  
it only using a soft, slightly moistened cloth.  
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that  
has been moistened in mild domestic detergent and then carefully wrung out.  
4
A26361-K1317-Z220-1-7619, edition 2  
 
Important notes  
CE marking  
The shipped version of this device complies with the requirements of EEC  
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC  
"Low voltage directive".  
Energy Star  
EnergyStar  
The Fujitsu LCD colour monitor is equipped with a power  
management system which reduces the power draw in OFF  
mode to less than 1 W. As a result, the LCD monitor satises  
the requirements of the U.S. Environmental Protection Agency  
(EPA).  
The EPA estimates that computer equipment uses approximately 5 % of all business  
electricity and that this is growing rapidly. If all desktop PCs and peripherals were to enter  
a low-power mode when not in use, the overall electricity saving could amount to $ 2 billion  
annually. These savings could also prevent the emission of 20 million tons of carbon dioxide  
into the atmosphere - equivalent to the discharge from 5 million cars.  
As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this  
product meets the Energy Star guidelines for energy efciency.  
A26361-K1317-Z220-1-7619, edition 2  
5
 
Important notes  
Disposal and recycling  
This device has been manufactured as far as possible from materials which can be recycled or  
disposed of in such a way that the environment is not damaged. The device may be taken back after  
use to be reused or recycled, provided that it is returned in a condition that bets its intended use.  
Any components not reclaimed will be disposed of in an environmentally acceptable manner.  
The device must be disposed of in accordance with local regulations for disposal of special  
waste. The screen background lighting contains mercury. You must observe the applicable  
handling and disposal safety regulations for uorescent tubes.  
If you have any questions regarding disposal, please contact your local sales ofce, our Help Desk, or:  
Germany  
Belgium  
Switzerland  
Fujitsu Technology  
Solutions GmbH  
RECUPEL  
Boulevard Reyers, 80  
B-1030 Brussels  
Tel.: +32 2 / 706 86 16  
Fax: +32 2 / 706 86 13  
SWICOSchweizerischer  
Wirtschaftsverband der  
Informations-, Kommunikations-  
und Organisationstechnik  
(Swiss Trade Association for  
Information, Communications  
and Organisational  
Technology). For a list of  
SWICO disposal sites, see:  
Remarketing and Recycling  
D-33106 Paderborn  
Germany  
Tel.: +49 5251 / 81 80 10  
Fax: +49 5251 / 81 80 15  
Asia  
USA  
Taiwan:  
Environmental  
Protection Administration  
Executive, Yuan, R.O.C.  
Fujitsu America Inc.  
1250E. Arques Avenue  
Sunnyvale, CA 94085  
U.S.A.  
Contact: Bernd Henning  
Phone No.: (408) 329-6737  
Fax No.: (408) 746-8299  
Information on this subject is also available on the Internet at "http://ts.fujitsu.com/recycling".  
6
A26361-K1317-Z220-1-7619, edition 2  
 
Getting started  
Getting started  
Unpacking and checking the delivery  
The display surface of the device is sensitive to pressure and scratches.  
Always hold the device by the casing!  
The complete device package includes:  
one monitor  
one data cable (D-SUB)  
one data cable (DVI-D)  
one audio cable  
one power cable  
one CD with software and documentation  
one Warranty Booklet  
one "Safety" manual  
Unpack all the individual parts.  
Check the contents of the package for any visible damage caused during transport.  
Check whether the delivery conforms to the details in the delivery note.  
Should you discover that the delivery does not correspond to the delivery  
note, notify your local sales outlet immediately.  
Do not discard the original packing material of the devices. You may need the  
packaging in the future if you need to transport your device.  
Setting up the device  
To ensure sufcient ventilation, the air inlet and outlet openings of  
the device must be kept clear.  
A26361-K1317-Z220-1-7619, edition 2  
7
 
Getting started  
Setting up an ergonomic video workstation  
Do not position the video workstation  
opposite a window (1).  
1
Position the monitor outside the reach  
of a light source (1).  
1
Position the keyboard where it is  
easiest to reach (1).  
1
8
A26361-K1317-Z220-1-7619, edition 2  
 
Getting started  
Position the monitor so that the eye distance  
to the screen (1) is around 50 cm.  
1
50 cm  
Position the monitor for optimum viewing  
(1). The monitor should under no  
circumstances fall outside the permissible  
viewing space (2).  
1
0
65  
30  
30  
60  
2
65  
2
Depending on the situation, it may be advisable to use a swivel arm or wall  
bracket (VESA FPMPMI), which are available from specialist dealers. For  
this purpose the monitor base must be removed beforehand as described  
A26361-K1317-Z220-1-7619, edition 2  
9
Getting started  
Adjusting the height  
The height of the monitor can be adjusted by approximately 120 mm.  
Grasp the monitor with both hands on the right and left edge of the casing  
and move it upward or downward.  
Adjusting the inclination  
Hold the monitor with both hands on the left and right sides of the casing  
and move it to the desired angle.  
Adjusting the rotation  
The monitor can be horizontally rotated by ± 45° from its centre position.  
Grasp the monitor with both hands on the right and left edge of the casing  
and turn it to the desired position.  
Adjusting portrait format  
The monitor can be rotated from horizontal format (landscape mode) into  
vertical format (portrait mode).  
Grasp the monitor with both hands on the right and left edge of the casing, move it into  
the highest position and turn it clockwise until it is in the portrait position.  
For you to be able to display the screen contents in portrait mode, your graphics card  
will also need to support this function or you will need to use special software.  
In the OSD menu you have the option of switching the OSD manually  
from landscape mode to portrait mode (see "Changing the monitor  
settings using the OSD menu", Page 17).  
To reset the monitor to landscape mode, the monitor should be turned anti-clockwise.  
The OSD display can be reset again in the OSD menu.  
10  
A26361-K1317-Z220-1-7619, edition 2  
 
Getting started  
Removing monitor base  
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.  
The display surface is susceptible to scratching!  
Switch off the monitor and pull the power  
plug out of the power socket.  
Lay the monitor on its face on a soft surface.  
Remove all cables.  
To remove the monitor base, undo the  
screws on the monitor base.  
You can now mount a swivel arm or a wall  
bracket in accordance with VESA FPMPMI  
using a hole spacing of 100 mm.  
For instructions on how to mount the  
swivel arm or wall bracket, please  
see the documentation for the swivel  
arm or wall bracket.  
For instructions on how to mount the swivel arm or wall bracket, please see  
the documentation for the swivel arm or wall bracket.  
A26361-K1317-Z220-1-7619, edition 2  
11  
 
Getting started  
Connecting the device  
Please observe the safety information in "Important notes", Page 3.  
CE conformance and optimum picture quality are guaranteed only if  
you use the data cables supplied.  
Switch off the monitor and the computer.  
Disconnect the power plug from the computer.  
Connecting cables to the monitor  
The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI  
connectors for connection to the monitor and to the computer.  
Information on the computer connections and interfaces is contained in the  
operating manual for the computer.  
1
1
= Security slot for "Kensington Lock"  
Select the data cable which is suitable for your computer.  
12  
A26361-K1317-Z220-1-7619, edition 2  
 
Getting started  
0
-
ECO / BASIC  
1
2
3
4
5
1
2
3
= Green standby mode switch  
= Power connector  
4
5
= DVI-D socket (DVI)  
= D-SUB socket (VGA)  
= AUDIO-IN socket  
Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket of  
the monitor and secure the plug-in connection by tightening the safety screws.  
The monitor automatically detects the input when only one signal source is connected.  
Insert one plug of the audio line in the AUDIO IN socket on the monitor  
and make sure it is properly engaged.  
Plug the power cable supplied into the power connector of the monitor.  
Secure the cover over the connections.  
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor  
from theft. A Kensington Lock is not included with the monitor at delivery.  
Connecting cables to the computer  
Information on the computer connections and interfaces is contained in the  
operating manual for your computer.  
Connect the data cable to the (active) monitor port on the computer and secure  
the plug-in connection by tightening the safety screws.  
Insert the other plug of the audio cable in the audio output of the computer.  
Plug the power connector of the monitor into a properly grounded mains outlet.  
Plug the power connector of the computer into a properly grounded mains outlet.  
If your computer has two monitor ports ("onboard" screen controller and separate  
graphics card), the monitor port for the separate graphics card is active as standard.  
A26361-K1317-Z220-1-7619, edition 2  
13  
 
Operation  
Operation  
Switching the device on and off  
2
1
1
= Power supply indicator  
2
= ON/OFF switch  
Press the buttons from the bottom up.  
The colour of the LED indicator changes as follows:  
LED indicator  
Status  
blue  
green  
Monitor and computer are switched on (normal mode).  
Monitor and computer are switched on (ECO mode).  
orange  
The monitor is not receiving a video signal or is in energy-saving mode.  
does not light up  
The monitor is switched off (or is in green standby mode - power  
consumption in standby and off mode 0.1W )  
Front  
Rear  
1
2
3
1 = power indicator  
2 = ON/OFF switch  
3 = green standby mode switch  
14  
A26361-K1317-Z220-1-7619, edition 2  
 
Operation  
In switch position "0" (ECO), green standby mode is activated, in which the monitor  
consumes 0.1 W. If the monitor cannot be switched on and remains dark, the switch  
must be set to "-" (BASIC). The monitor then consumes < 1 W in standby mode.  
Switch the device on using the ON/OFF switch.  
Only switch on the computer after you have switched on the monitor.  
Notes on power management  
If your computer is equipped with power management (power-saving mode), the monitor can fully  
support this function. Here the monitor does not distinguish between the individual energy-saving  
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of  
immediately switching into the mode with the highest energy-saving effect.  
Stage  
Operation  
Normal  
Power saving mode  
ECO  
Green Standby  
Mode  
Compatible  
Power supply  
indicator  
Lights up blue  
Lights up green  
unlit  
Lights up orange  
Monitor  
Max. brightness  
typ. 200 cd/m2  
B17-5 : < 17 W  
Unlit  
Unlit  
Power consumption B17-5 : < 24 W  
(typical)  
reduced to  
0.1 W  
reduced to  
< 1 W  
B19-5 : < 28 W  
B19-5 : < 19 W  
If your computer detects inactivity (no input), it sends an appropriate signal to the monitor to reduce  
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to  
indicate the status change. ECO and Green Standby Mode are the preset factory defaults.  
Once an input is made at the computer the screen contents are restored.  
For detailed information on how energy-saving mode operates, please refer to  
the operating manual or technical manual of the computer.  
A26361-K1317-Z220-1-7619, edition 2  
15  
 
Operation  
Changing the monitor settings  
When putting the monitor into operation for the rst time, the screen display should  
be optimally adapted to the display adapter used.  
Changing the monitor settings with the buttons  
of the control panel  
The buttons of the control panel have two functions. With the OSD menu not  
activated, you can make the following settings directly:  
EXIT / AUTO  
SELECT/ MENU  
ECO  
INPUT  
1
2
3
1
2
= Buttons for the OSD menu (On-Screen  
Display)  
3
= ON/OFF switch  
= Power supply indicator  
Performing auto-adjustment of the monitor  
EXIT / AUTO  
Press the  
button for about 1 second.  
The Auto Processing message appears  
Picture quality and position are set to optimum values for your system.  
Selecting input signal (D-SUB/DVI-D)  
INPUT  
button to open the Input select setting window.  
Press the Back /  
INPUT  
Press the Forwards / ECO button or the Back /  
desired monitor connection (VGA or DVI).  
button to select the  
This setting window can also be called when the OSD menu is locked.  
16  
A26361-K1317-Z220-1-7619, edition 2  
 
Operation  
Activate/deactivate ECO operating mode  
The power consumption of the device can be decreased by reducing  
the brightness of the picture.  
Press the Forwards / ECO button to switch the ECO operating mode on or off.  
The message ECO on / off is displayed.  
If the ECO operating mode is activated, the following OSD settings are changed:  
Colour  
6500K  
temperature  
Brightness  
reduced  
After the ECO operating mode is switched off, the brightness previously set by the user is restored.  
Locking the OSD menu  
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.  
SELECT/MENU  
button pressed for a few seconds while you  
Press and keep the  
switch on the monitor with the ON/OFF switch.  
The message OSD locked / unlocked is displayed.  
Proceed in the same way to release the locked OSD menu again.  
Locking the ON/OFF button  
The ON/OFF switch can be locked to prevent accidental or unauthorised  
changes to the monitor settings.  
INPUT  
Press the Forwards / ECO button and the Back /  
time and keep them pressed for a few seconds.  
button at the same  
The message Power button locked / unlocked is displayed.  
Proceed in the same way to release the locked ON/OFF switch again.  
Changing the monitor settings using the OSD menu  
With the buttons on the control panel, you can call up and use the integrated  
OSD (On-Screen Display) menu.  
A26361-K1317-Z220-1-7619, edition 2  
17  
 
Operation  
The OSD menu is available in various languages. The English menu names are  
used in the following description (default setting). You can select another language  
using the OSD Language function in the OSD Setup menu.  
SELECT/MENU  
Press the  
activate the OSD menu.  
button to  
The main menu appears, with icons  
for the setting functions.  
The rst icon, (Brightness/Contrast), is  
highlighted and the associated functions are  
visible in the right-hand menu eld.  
Press the Forwards / ECO button or  
INPUT  
the Back /  
another icon (e.g. Image adjust).  
SELECT/MENU  
select the highlighted icon.  
button to highlight  
Press the  
button to  
The Image adjust setup window will  
be displayed.  
Press the Forwards / ECO button or  
INPUT  
the Back /  
button to highlight  
another function.  
SELECT/MENU  
Press the  
button to  
select the highlighted function.  
Press the Forwards / ECO button or  
INPUT  
the Back /  
button to highlight  
another function.  
EXIT / AUTO  
Press the  
button to  
exit the function.  
Press the Forwards / ECO button or the  
INPUT  
Back /  
function or press the  
to return to the main menu.  
All changes are stored automatically.  
button to highlight another  
EXIT / AUTO  
button  
18  
A26361-K1317-Z220-1-7619, edition 2  
Operation  
If you wish to change other settings, select the corresponding function from the OSD  
main menu. All possible adjustments of the main menu are described below.  
OSD menu functions  
The OSD menu for analog monitor operation is described below. During  
digital operation some functions are not available, as they are not required  
due to the digital transmission technology used.  
Adjusting the brightness and contrast  
Call up the Brightness/Contrast setting window  
Brightness  
Set the brightness of the display  
With this function you change the brightness of the background lighting.  
You can see whether the ECO operating mode is active under the bar for  
displaying the brightness setting.  
Contrast  
Set the contrast of the display  
With this function you modify the contrast of bright colour tones.  
Set the brightness of the display  
Black level  
Auto level  
With this function you modify the contrast of dark colour tones.  
Adjust the signal level  
With this function you can automatically set the contrast.  
SELECT / MENU  
The function is executed with the  
button.  
If the contrast is set too high, bright surfaces can no longer be distinguished from very  
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.  
A26361-K1317-Z220-1-7619, edition 2  
19  
Operation  
Adjusting the picture size and position  
Open the Image adjust window  
H-position  
V-position  
Clock  
Adjusting the horizontal position  
With this function you can move the picture to the left or to the right.  
Adjusting the vertical position  
With this function you can move the picture up or down.  
Adjusting the synchronisation  
With this function you can adjust the picture width in order to eliminate  
vertical picture faults.  
Phase  
Eliminating picture faults  
With this function you ne-tune your monitor to eliminate picture faults.  
Sharpness  
Adjusting the picture sharpness  
This function is used to adjust the picture sharpness.  
Adjusting the volume  
Call the Audio setting window  
Volume  
Mute  
Set the volume for playback with the integrated loudspeakers  
Switch the loudspeakers off or on  
Setting the colour temperature and colours  
Call the Colour setting window  
Select the colour temperature  
The "warmth" of the screen colours is set using the colour temperature. The  
colour temperature is measured in Kelvin (K). You can choose between  
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.  
In the user-dened setting you can change the colour ratios of the basic  
colours (red, green, blue) as required.  
20  
A26361-K1317-Z220-1-7619, edition 2  
Operation  
Adjusting the display of the OSD menu  
Calling the OSD Setup adjustment window  
Language  
Selecting the language for the OSD menu  
With this function you choose between English (default setting), French,  
German, Italian and Spanish as the language for the OSD menu.  
OSDH position  
OSDV position  
OSDTimeout  
Setting the horizontal position of the OSD menu  
With this function you can move the OSD menu to the left or to the right.  
Setting the vertical position of the OSD menu  
With this function you can move the OSD menu up or down.  
Setting the display duration of the OSD menu  
With this function you can select a value from 10 to 120 seconds.  
If the set time expires without a setting being made, the OSD menu is  
automatically hidden.  
OSD Rotation  
With this function you switch the OSD menu from portrait mode to landscape  
mode and vice versa.  
Off = The OSD menu is displayed in portrait mode.  
On = The OSD menu is displayed in landscape mode.  
Setting functions in the Advanced menu  
Call up the Advanced setting window  
Input select  
Selecting the input signal  
This function allows you to switch the monitor from analogue to digital mode  
and vice versa, when two signal sources are connected.  
This is on condition that the graphic card supports this function.  
Activation/deactivation of the DDC-CI  
DDC-CI  
On = The DDC-CI function is enabled (standard setting)  
Off = The DDC-CI function is disabled  
Factory Recall  
Activating the factory settings  
With this function all settings are reset to the factory settings without  
prompting for conrmation.  
SELECT/MENU  
Press the  
button to activate the function. The Auto  
Processing message is displayed.  
A26361-K1317-Z220-1-7619, edition 2  
21  
Operation  
Displaying information  
Call the Information setting window  
With this function the model designation, serial number, resolution, H/V  
frequency, input signal and polarity of the synchronisation signal are  
displayed.  
22  
A26361-K1317-Z220-1-7619, edition 2  
Troubleshooting  
Troubleshooting  
Should an error occur, rst check the following points. If the distortion is still not eliminated,  
the monitor should, if possible, be checked on another computer.  
If you are unable to solve the problem, please inform our help desk.  
Having this problem?  
Check the following points:  
No screen display  
Check whether the main switch at the rear  
of the monitor is switched on.  
Power indicator does not light up  
Check whether the power cable on the  
monitor is connected correctly.  
Check whether the computer is switched on.  
Check whether the computer is switched on.  
No screen display  
Check whether the data cable for the  
monitor is correctly attached to the monitor  
port on the computer.  
Power indicator is lit  
Press any key on the computer keyboard.  
The computer may be in power saving  
mode.  
Alter the brightness and/or contrast until you  
get a picture.  
Message: No Signal  
Check whether the data cable for the  
monitor is correctly attached to the monitor  
port on the computer.  
Check whether the computer is switched on.  
Message: Frequency out of range:## kHz The input signal (horizontal frequency and  
/ ## Hz Please change the display mode refresh rate) at the displayed input does not  
to 1280 x 1024 with 60 Hz  
correspond to the technical data for the monitor.  
Adjust the video frequency range using the  
computer software (see documentation for  
the computer or display adapter).  
Set a different screen resolution using the  
computer software (see documentation for  
the computer or display adapter).  
Picture position not correct  
Picture is shaking  
The monitor recognises an undened mode (see  
EXIT / AUTO  
button to perform  
Press the  
auto-adjustment of the screen.  
Check whether the data cable for the  
monitor is correctly attached to the monitor  
port on the computer.  
EXIT / AUTO  
button to perform  
Press the  
auto-adjustment of the screen.  
SELECT / MENU  
button to  
Picture is wrongly adjusted  
Press the  
activate the Factory Recall function.  
The Auto Processing message appears.  
A26361-K1317-Z220-1-7619, edition 2  
23  
 
Troubleshooting  
Having this problem?  
Check the following points:  
EXIT / AUTO  
button to perform  
Picture disturbances (vertical lines)  
Press the  
auto-adjustment of the screen.  
EXIT / AUTO  
button to perform  
Picture disturbances (horizontal lines, picture  
noise)  
Press the  
auto-adjustment of the screen.  
The screen becomes darker  
The background lighting has a limited lifetime.  
If your monitor display should become too dark,  
the background lighting will have to be replaced.  
Please contact our help desk.  
24  
A26361-K1317-Z220-1-7619, edition 2  
Notes regarding the DIN EN ISO 13406-2 standard  
Notes regarding the DIN EN ISO  
13406-2 standard  
Permanently unlit or lit pixels  
The standard of production techniques today cannot guarantee an absolutely fault-free screen  
display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum  
permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II).  
Examples:  
Example: A 17"/19” at-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 =  
1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there  
are almost 4 million subpixels (dots) in total. In accordance with ISO 13406-2 (Class II),  
a maximum of 6 pixels and also 7 subpixels may be faulty.  
A26361-K1317-Z220-1-7619, edition 2  
25  
 
Technical specication  
Technical specication  
Condensation is not permitted, neither in the rated range of operation  
nor in the limit range of operation.  
B17-5 ECO  
B19-5 ECO  
Dimensions and weight  
Visible diagonals  
Dot pitch  
43 cm  
48 cm  
0.264 mm  
337.9 mm  
270.3 mm  
1280 x 1024  
373 mm  
405 mm  
209 mm  
453 mm  
436 mm  
212 mm  
approx. 5.2 kg  
28  
0.294 mm  
376.3 mm  
301 mm  
1280 x 1024  
412 mm  
409 mm  
209 mm  
453 mm  
464 mm  
212 mm  
approx. 5.9 kg  
28  
Image size  
Width  
Height  
Maximum resolution  
Dimensions incl.  
monitor base  
Width  
Height  
Depth  
Width  
Height  
Depth  
Dimensions of box  
Weight (without packaging)  
Storable display modes  
Pixel error classes  
according to  
Class  
II  
II  
ISO 13406-2  
Accessories  
Power cable (1.8 m)  
D-SUB data cable (1.8 m)  
DVI-D data cable (1.8 m)  
Audio cable (1.8 m)  
Electrical data  
Video  
Analogue  
Digital  
positive, 0.7 Vss, 75 Ω  
DVI-D  
Synchronisation  
Horizontal frequency  
Refresh rate  
Separate Sync. TTL, positive or negative  
30 kHz .... 83 kHz (multi-scanning)  
55 Hz .... 76 Hz  
Max. pixel rate  
Power supply  
165 MHz  
switches automatically  
100 V – 240 V, 50 Hz – 60 Hz  
Total power  
consumption  
Normal operation  
< 24 W in normal operation (17")  
< 28 W in normal operation (19")  
0.1 W in Green Standby Mode  
1.0 W left; 1.0 W right  
Energy saving mode  
Max. sound output  
26  
A26361-K1317-Z220-1-7619, edition 2  
 
Technical specication  
Environmental conditions  
Environment class 3K2, DIN IEC 721  
Rated range of operation  
15 °C .... 35 °C  
Humidity  
20 % .... 85 %  
5 °C .... 35 °C  
Limit range of operation  
Humidity  
20 % .... 85 %  
VESA-DDC-compatible VGA interface  
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video  
Electronics Standard Association, Display Data Channel) is used as the communications  
interface between the monitor and the computer. If the computer is equipped with a  
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring  
optimum operation from the monitor and select the appropriate settings.  
Preset operating modes  
The picture position and size have been optimised at the factory for the operating  
modes listed above. Depending on the graphics card used, it may be necessary  
to adjust the display position or size. In this case you can change and save the  
settings (see chapter "Changing the monitor settings", Page 16).  
Most frequent operating modes  
Horizontal frequency  
Refresh rate  
Screen resolution  
720 x 400  
31.5 kHz  
70 Hz  
31.5 kHz  
60 Hz  
640 x 480  
37.5 kHz  
75 Hz  
640 x 480  
37.9 kHz  
60 Hz  
800 x 600  
46.9 kHz  
75 Hz  
800 x 600  
48.4 kHz  
60 Hz  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
60.0 kHz  
75 Hz  
64.0 kHz  
60 Hz  
79.9 kHz  
75 Hz  
For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.  
Because of the technology used (active matrix), an LCD monitor provides a totally  
icker-free picture, even with a refresh rate of 60 Hz.  
A26361-K1317-Z220-1-7619, edition 2  
27  
 
Technical specication  
SUB D port  
5
1
10  
6
15  
11  
Pin  
1
Meaning  
Video input red  
Video input green  
Video input blue  
Ground  
2
3
4
5
Ground  
6
Video ground red  
7
Video ground green  
Video ground blue  
+5 V (DDC)  
Sync. ground  
Ground  
8
9
10  
11  
12  
13  
14  
15  
DDC Data  
H. sync  
V. sync  
DDC Clock  
28  
A26361-K1317-Z220-1-7619, edition 2  
 
Technical specication  
DVI-D port  
1
9
17  
Pin  
1
Meaning  
TMDS Data2–  
TMDS Data2+  
TMDS Data 2/4 Shield  
not connected  
not connected  
DDC Clock  
2
3
4
5
6
7
DDC Data  
8
Analog Vertical Sync  
TMDS Data1–  
TMDS Data1+  
TMDS Data 1/3 Shield  
not connected  
not connected  
+5V Power  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Earth  
Hot Plug Detect  
TMDS Data0–  
TMDS Data0+  
TMDS Data 0/5 Shield  
not connected  
not connected  
TMDS Clock Shield  
TMDS Clock+  
TMDS Clock–  
A26361-K1317-Z220-1-7619, edition 2  
29  
 

Fisher Paykel TITAN CG913 User Manual
EVGA NFORCE 780I SLI User Manual
Cypress FLEx18 CY7C0832BV User Manual
Cypress CY7C1319CV18 User Manual
CTX M Series M730V User Manual
Cisco Systems CP7970GRF User Manual
Avaya one X Deskphone Value Edition 1608 User Manual
Avanti Products Dishwasher DWE1802SS User Manual
Adesso TRU FORM PCK 308 User Manual
Acnodes APH 9190 User Manual