DISHWASHER / LAVAPLATOS
INSTRUCTION MANUAL / MANUAL DE INSTRUCCIONES
Model Numbers / Números de Modelos: DWE1800W / DWE1801B /
DWE1802SS
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 18.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and
specifications without notice.
Avanti Products LLC
P.O. Box 520604 - Miami, Florida 33152
TABLE OF CONTENTS
Help Us Help You
5
Parts and Features
6
Important Safety Instructions
Electrical Connection
7
7
Water Heater Safety
8
Before Using Your Dishwasher
Control Panel
8
9
9
Wash Cycle Descriptions
Overflow Protection
10
Using the Detergent Dispenser
Using the Rinse Aid Dispenser
10
10 – 11
11 – 12
12
How to Efficiently Load Your Dishwasher
Starting, Modifying and Canceling the Wash Cycle
Filtering System
12 – 13
13
Caring and Maintenance
Cleaning the Spray Arms
13
Cleaning the Filters
13
Cleaning the Door
13
How to Keep your Dishwasher in Shape
Problems with your Dishwasher?
Troubleshooting Guide
14
14
14 – 15
16
Service for your Dishwasher
Wiring Diagram
16
Your Avanti Products Warranty
Instrucciones en Español
17
18 - 26
Back Cover
Registration Information / Registration Card
3
4
HELP US HELP YOU...
Write down the model and serial numbers.
Read this guide carefully.
You'll find them on a plate located on the rear
wall of the dishwasher.
It is intended to help you operate and maintain
your new dishwasher properly.
Please write these numbers here:
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance, please call:
____________________________________
Date of Purchase
Avanti Customer Service
800-220-5570
____________________________________
Model Number
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your dishwasher.
If you received a damaged dishwasher,
immediately contact the dealer (or builder) that
sold you the dishwasher.
Save time and money. Before you call for
service, check the Troubleshooting Guide. It
lists causes of minor operating problems that
you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some
steps to follow for further help.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
10880 NW 30th Street
Miami, FL 33172
FIRST, contact the people who serviced your
dishwasher. Explain why you are not pleased.
In most cases, this will solve the problem.
5
PARTS AND FEATURES
7
1
2
3
8
9
4
5
6
10
11
12
1
2
3
4
5
6
7
8
9
Upper Rack
Spray Arms
Lower Rack
Stainless Steel Interior
Main Filter Assembly
Detergent Dispenser
Cup Shelf
Silverware Basket
Coarse Filter
10 Rinse Aid Dispenser
11 Inlet Valve
12 Junction Box
6
Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when
using your dishwasher, follow these basic precautions:
WARNING
Read all instructions before using the dishwasher.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
dishwashers are still dangerous. . . even if they will “just sit in the garage a few days.”
Before you throw away your old appliance: Take off the doors. Leave the shelves in
place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the dishwasher.
Never clean dishwasher parts with flammable fluids.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other dishwasher.
Plug the dishwasher into an exclusive properly installed-grounded wall outlet. Do not
under any circumstances cut or remove the third (ground) prong from the power cord.
Any questions concerning power and or grounding should be directed toward a certified
electrician or an authorized Avanti Products service center
-Save these instructions-
Electrical Connection
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This dishwasher should be properly grounded for your safety. The power cord of this dishwasher is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize
the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord
supplied.
Never use an extension cord to connect power to the unit.
Never use a two-prong grounding adapter.
Where a two-prong wall receptacle is encountered, contact a qualified electrician to have it replaced
with a 3-prong receptacle in accordance with applicable electrical codes.
This dishwasher requires a standard 110/120 volts A.C.~/60hz electrical outlet with three-prong
ground.
The cord should be secured behind the dishwasher and not left exposed or dangling to prevent
accidental injury.
Connect to a grounded metal, permanent wiring system: or run an equipment grounding terminal or
lead of the appliance.
Improper connection of the equipment grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative if you are in doubt whether the appliance
is properly grounded.
Do not attempt to repair or replace any part of your dishwasher unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
To minimize the possibility of electric shock, disconnect this appliance form the power supply before
attempting any maintenance. Note: Turning the dishwasher off does not disconnect the appliance
from the power supply. We recommend having a qualified technician service your appliance.
7
Water Heater Safety
Under certain conditions hydrogen may be produced in a water heater that has not been used for two
weeks or more. Hydrogen gas is explosive.
If the hot water has not been use for two weeks or more, prevent the possibility of damage or injury by
turning on all hot water faucets and allow them to run for several minutes. Do this before using any
electrical appliance which is connected to the hot water system. This simple procedure will allow any
built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or
appliance during this process.
Use this appliance only for its intended purpose as described in this Owner’s Manual.
WARNING
READ FOR PROPER USE
Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
Do not touch the heating element during or immediately after use.
Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic
items not so marked, check the manufacturer recommendations.
Use only detergent and rinse additives designed for an automatic dishwasher. Using detergent that
is not specifically designed for dishwashers will cause the dishwasher to fill with suds.
Keep children away from detergent and rinse aid, keep children away from the open door of the
dishwasher, there could still be some detergent left inside.
The door should not be left in the open position since this could present a tripping hazard.
During installation, the power supply must not be excessively bent or flattened.
To reduce the risk of injury, do not allow children to play in or on a dishwasher.
Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door
very carefully if the dishwasher is operating, there is a risk of water squirting out.
Do not place any heavy objects or stand on the door when it is open. The appliance could tip
forward.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage the door seal;
2) Load sharp knives with the handles up to reduce the risk of cut-type injuries.
When using your dishwasher, you should prevent plastic items form contacting with heating
element.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
similarly qualified person in order to avoid a hazard.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
Remove the door when removing an old dishwasher from service or discarding it.
Do not tamper with controls.
Do not touch the heating element during or immediately after use.
Before Using Your Dishwasher
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
2 Wash Racks (1 Upper / 1 Lower)
1 Silverware Basket
1 Measuring Spoon
1 Instruction Manual
1 Measuring Cup
1 Installation Manual
Clean the interior surface with lukewarm water using a soft cloth.
8
CONTROL PANEL
7
1
2
3
1
2
3
4
5
6
7
Program Indicator Lights
Rinse Aid Low Indicator Light
Power Indicator Light
Power ON / OFF Button
Start / Reset Button
Program Selector Button
Air Vent
6
5
4
Program Indicator light next to the selected program will turn on while the cycle is
running. During the wash cycle the indicator light for the selected program will blink
intermittently.
1
2
3
4
Rinse Aid Warning Light will turn on when the dispenser needs to be refilled.
Power Indicator light will turn on when the Power ON/OFF button is pressed.
ON/OFF Button: Press to turn the unit ON/OFF
Start / Pause Button: Press to start the wash cycle, press again while the unit is in
operation to pause the wash cycle.
Program Selector Button: Press the button to select the appropriate wash cycle for your
needs.
5
6
Once the program has been selected the appropriate indicator light will flash/blink
intermittently
Pre-Programmed Wash Cycles
9
OVERFLOW PROTECTIONS
Our Avanti dishwasher has an overfill protection device which could automatically shut off the inlet valve
and start the drain pump if the water overflow. If this occurs, turn off the main water supply before calling
a servicer. If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
DETERGENT DISPENSER
TO PREVENT THE FORMATION OF DETERGENT DEPOSITS DO NOT ADD EXCESS AMOUNT OF
DETERGENT AS YOUR DISHWASHER HAS A SPECIALLY DESIGNED WATER SOFTNER.
The dispenser must be refilled before the start of each wash cycle following the instructions provided in
the “Wash Cycle Table”. Your dishwasher uses less detergent and rinse aid than conventional
dishwashers. Generally, only one teaspoon of detergent is needed for a normal wash load, heavily
soiled items may need more detergent. Always add the detergent just before starting the dishwasher,
otherwise it could become damp and not dissolve properly.
Amount of Detergent to Use
IF THE WATER IN YOUR AREA IS NOT TOO HARD, YOU MAY ALSO PREVENT THE FORMATION
OF DEPOSITS BY DETERGENT
The amount of detergent needed can vary due to differences in the water hardness of your area. To
determine the water hardness in your area, contact your local water utility or area water softening
company. The harder the water, the more detergent you may need. Remember, you should adjust the
amount of detergent you use by small amounts until you find the correct amount.
Removing Hard Water Spots From Dishes
To remove hard water spots, try the following:
Run dishes through a normal wash program.
Remove all metal dishware, such as cutlery, pans, etc., from the
dishwasher.
Do not add detergent.
Pour two cups of vinegar into a bowl and set the bowl face up on the lower
rack of the dishwasher.
Run the dishes through a normal wash program.
If this doesn’t work, try the same process with ¼ cup of citric acid crystals instead of vinegar.
Proper Use Of Detergent
Use only detergent specifically made for use in dishwasher. Keep your detergent fresh and dry. Don’t
put powder detergent into the dispenser until you’re ready to wash dishes.
Rinse Aid Dispenser
• Your dishwasher is designed to use liquid rinse aids. The rinse-aid
dispenser is located on the door next to the detergent dispenser. Fill the
rinse-aid dispenser until the level indicator turns completely black
(approximately 100ml of liquid rinse-aid). Be sure not to overfill the
dispenser as this will cause over-sudsing. Wipe away any spills with a
damp cloth. Keep in mind that if you have soft water, you may not need
to use a rinse-aid as it may cause a white film to develop on your dishes.
• To open the dispenser, turn the cap to the “Open” arrow (counter-clockwise) and lift outward.
• Pour the rinse-aid into the dispenser, being careful not to overfill.
• Replace the cap by inserting it by aligning the arrow to the open position and turning clockwise to
close it.
• The rinse-aid is released during the final rinse to prevent water from forming droplets on your dishes
that can leave spots and streaks. It also improves drying by allowing the water to “sheet” off the dishes.
10
Adjusting Rinse Aid Dispenser
A measured amount of rinse aid is released during the final rinse. As with
detergent, the amount of rinse aid needed for your dishes depends on the
hardness of the water in your area. Too much rinse aid can result in lather of
foaming and cause cloudiness or streaks on your dishes. If the water in your area
is very soft, you may not need rinse aid. If you do, you can dilute the rinse aid with
an equal amount of water.
The rinse aid dispenser has 4 settings. Always start with the dispenser set on “2”.
If spots and poor drying are problems, increase the amount of rinse aid
dispensed by removing the dispenser lid and rotating the dial to “3”. If the dishes still are not drying
properly or are spotted, adjust the dial to “4”. We suggest you to set on”2”.
When To Refill The Rinse Aid Dispenser
If there is no rinse aid warning light on the control panel, you can
judge the amount of rinse aid by the following means: The black dot
on the rinse aid dispenser indicates the amount of rinse aid in the
dispenser. As the rinse aid diminishes, the size of the black dot
decreases. You should never let the rinse aid get below ¼ full.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and lighter dishware such as glasses, coffee and tea
cup and saucers, as well as plates, small bowls and shallow pans ( as long as they are not too dirty).
Position the dishes and cookware so that they do not get moved by the spray of water.
The upper rack can be adjusted for height by putting wheels of different height into the rails.
1. Cups
2. Saucer
3. Glasses
4
3
1
3
2
2
How To Use The Lower Rack
We recommend that you place large items which are most difficult to clean into the lower rack: pots,
pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the
rotation of the top spray arm.
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom rack features fold down tine rows so that larger or more pots and pans can be loaded.
4
3
4. Serving Bowl
5. Fruit Bowl
6
5
6. Bread and Butter Plates
7. Serving Plates
8. Dinner Plates
7
9. Silverware Basket
6
9
8
11
Silverware Basket
Silverware should be placed in the silverware basket with handles at the bottom: if the rack has side
baskets, the spoon should be loaded individually into the appropriate slots, especially long utensils
should be placed in the horizontal position at the front of the upper rack.
1
2
3
4
Salad Forks
Teaspoons
Soup Spoons
Dinner Forks
5
6
7
Knives
Serving Spoons
Serving Forks
Starting A Wash Cycle
Make sure that the plug for the appliance is inserted into the wall socket.
Make sure the water supply is turned on to full pressure.
Load the dishwasher.
Pour in the detergent.
Close the door completely.
Press the ON/OFF button.
Select the appropriate wash cycle suitable for your needs the dishwasher will begin the selected
wash cycle.
During the wash cycle the START/RESET indicator light will flash intermittently.
Canceling Or Modifying A Wash Cycle Setting
Premise: A cycle that is underway can only be modified if it has only been running for a short time.
Otherwise, the detergent may have already been released, and the appliance may have already
drained the wash water. If this is the case, the detergent dispenser must be refilled. Press the
START/RESET button to hold for more than 3 seconds to cancel the running program. Then you can
select appropriate programs.
At The End Of The Wash Cycle
When the cycle has finished; turn off the appliance using the ON/OFF button, shut off the water supply
and open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid
handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also
dry better.
Forgot To Add A Dish?
A forgotten dish can be added any time before the detergent cup opens.
Press the START/RESET button
Pull the door handle.
Do not open the door until the water spray action stops. Steam may rise out of the dishwasher.
Add forgotten dishes.
Push the door to close it. When the door is closed right a click will be heard.
Press the START/RESET button again to continue accordingly.
Filtering System
For your convenience, we have placed the drain pump and filtering system within easy reach inside the
tub. There are three components of the filtering system: the main filter, the coarse filter and the fine
filter.
1. Main Filter
Food and soil particles trapped by this filter are pulverized by a special jet on the
lower spray arm and washed down the drain.
2. Coarse Filter
Larger items, such as pieces of bone or glass, that could clog the drain are trapped in the coarse filter.
To remove an item caught in this filer, gently squeeze the tabs on top of this filter and lift out.
3. Fine Filter
12
This filter holds soil and food residue in the sump area and prevents it from being re-deposited on the
dishes during a cycle.
Caring And Maintenance
To clean the control panel use a lightly dampened cloth then dry thoroughly. To clean the exterior use a
good appliance polish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect against freezing
If you dishwasher is left in an unheated place during the winter, ask a service technician to:
1. Cut off electrical power to the dishwasher. Remove fuses or tip circuit breaker.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain water from the inlet pipe and water valve. (Use a pan to catch the water.)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the plastic sump cover in the tub the bottom and use a sponge to soak up water in rubber
boot.
Cleaning The Spray Arms
It is necessary to clean the spray arms regularly or hard water chemicals will clog the
spray arm jets and bearings. To remove the spray arm, screw off the nut to take out
the washer on top of the spray arm and remove the arm. Wash the arms in soapy and
warm water and use a soft brush to clean the jets. Replace them after rinsing them
thoroughly.
Cleaning The Filters
Filter assembly
1. Turn the Coarse filter in a counter-clockwise direction and lift outward.
2. Lift out the Main filter
3. Lift out the Fine filter.
To replace the filter follow the same steps in reverse.
For best performance and results, the filter assembly must be cleaned.
The dishwasher must never be used without the filters. Improper replacement of the filter may reduce
the performance level of the appliance and damage dishes and utensils.
WARNIING – Never run the dishwasher without the filters in place.
Cleaning The Door
To clean the edge around the door, you should use only a soft warm, damp rag. To
prevent penetration of water into the door lock and electrical components, do not use
a spray cleaner of any kind.
Also, never use abrasive cleaners or scouring pads on the outer surfaces because
they will scratch the finish. Some papers towels can also scratch or leave marks on
the surface.
WARNING - Never use a spray cleaner to clean the door panel for it could damage the door lock
and electrical components. It is not allowed to use the abrasive agent or some paper towel
because of the risk of scratching or leaving spots on the stainless steel surface.
13
How To Keep You Dishwasher In Shape
After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
No solvents or abrasive cleaning products
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning
products. Rather, use only a cloth and warm soapy water. To remove spots or stains from the surface of
the interior, use a cloth dampened with water and a little white vinegar, or a cleaning product made
specifically for dishwashers.
When you go on Holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and
them remove the plug from the AC socket, turn off the water supply and leave the door of the appliance
slightly ajar. This will help the seals last longer and prevent odors from forming within the appliance.
Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
PROBLEMS WITH YOUR DISHWASHER?
You can solve many common dishwasher problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM
Dishwasher does not
operate.
POSSIBLE CAUSE
The circuit breaker tripped
or blown fuse.
Power supply is not turned
on.
WHAT TO DO
Replace fuse or reset circuit breaker. Remove any
other appliances sharing the same circuit with the
dishwasher
Make sure the dishwasher is turned on and the
door is closed securely.
Make sure the power cord is properly connected.
Check that the water supply is connected properly
and the water is turned on.
The system is designed to detect an overflow.
When it doesn’t it shuts off the circulation pump
and turns on the drain pump.
Water pressure is low.
Overflow
Drain pump doesn’t stop
Noise
Some audible sounds are
normal.
Sound from soft food shredding action and
detergent cup opening.
Ensure everything is secured in the dishwasher.
Utensils are not secured in
the baskets or something
small has dropped into the
basket.
Dishwasher has not been used regularly. If you do
not use it often, remember to set it to fill and pump
out every week, which will help keep the seal
moist.
Motor hums.
Suds in the tub
Improper detergent.
Use only the special dishwasher detergent to avoid
suds.
If this occurs, open the dishwasher and let suds
evaporate.
Add 1 gallon of cold water to the tub. Close and
latch the dishwasher, then drain out the water by
slowly turning the dial until a drain period is
reached. Repeat if necessary.
Always wipe-up rinse agent spills immediately.
Spilled rinse agent.
Stained tub interior
Detergent with colorant was
Make sure that the detergent is the one without
14
used.
colorant.
Dishes are not dried
Rinse agent dispenser is
empty.
Make sure the rinse agent dispenser is filled.
Dishes and flatware not
clean.
Improper program.
Improper rack loading.
Select a stronger program.
Make sure that the action for the detergent
dispenser and spray arms are not blocked by large
dishware.
Cloudiness on glassware.
Combination of soft water
and too much detergent.
Use less detergent if you have soft water and
select a shorter cycle to wash the glassware to get
them clean.
Yellow or brown film on
inside surfaces.
Tea or coffee stains.
Using a solution of ½ cup bleach and 3 cups warm
water to remove the stains by hand.
Warning
You have to wait for 20 minutes after a cycle to let
the heating elements cool down before cleaning
interior: otherwise, burns will happen.
You have to call a water softener company for a
special filter.
Iron deposits in water can
cause an overall film.
White film on inside surface. Hard water minerals
To clean the interior, use a damp sponge with
dishwasher detergent and wear rubber gloves.
Never use any other cleaner than dishwasher
detergent for the risk of foaming or suds.
Re-load the dishes properly.
Detergent left in dispenser
Dishes block detergent
cups.
cups.
Steam
Normal phenomenon
There is some steam coming through the vent by
the door latch during drying and water draining.
Use a mild abrasive cleaner to eliminate those
marks.
Black or gray marks on
dishes.
Aluminum utensils have
rubbed against dishes.
Water standing in the bottom This is normal.
of the tub.
A small amount of clean water around the outlet on
the tub bottom at the back of the tub keeps the
water seal lubricated.
Water doesn’t pump out of
the tub.
Drain is clogged.
Make sure the kitchen sink is draining well. If the
dishwasher drains into a disposer, run it clear.
Be careful not to overfill the rinse aid dispenser.
Spilled rinse aid could cause oversudsing and lead
to overflowing. Wipe away any spills with a damp
cloth.
Dishwasher leaks.
Overfill dispenser or rinse
aid spills.
Make sure the dishwasher is level.
Dishwasher isn’t level.
LIGHT and QUICK program
lights flicker intermittently
Water has not reached the
required temperature (HOT)
Malfunction of the temperature sensor and or the
heating element
NORMAL and LIGHT
program lights flicker
intermittently
Failure of the temperature
sensor
Temperature sensor has failed.
Contact an authorized service center
NORMAL and QUICK
program lights flicker
intermittently
Failure of the temperature
sensor
Temperature sensor has failed.
Contact an authorized service center
15
SERVICE FOR YOUR DISHWASHER
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti dishwashers. With the purchase of your Avanti dishwasher, you can
have the confidence that if you ever need additional information or assistance, the Avanti Products
Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
Whatever your questions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your home, by personal
check, money order, Master Card, or Visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your dishwasher inside and out.
800-220-5570
In-Home Repair Service
800-220-5570
Wiring Diagram
DWE1800W / DWE1801B / DWE1802SS
16
Staple your sales receipt here. Proof of original
purchase date is needed to obtain service under
warranty.
YOUR AVANTI PRODUCTS
WARRANTY
WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon the
date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless
described in detail in the warranty document. For one year from the date of purchase by the original owner, Avanti
products will, at its option, repair or replace any part of the product which proves to be defective in material or
workmanship under normal use. Avanti Products will provide you with a reasonably similar product that is either
new or factory refurbished. During this period Avanti Products will provide all parts and labor necessary to correct
such defects free of charge, so long as the product has been installed and operated in accordance with the written
instructions in this manual. In rental or commercial use, the warranty period is 90 days. All Avanti appliances of 3.5
cubic feet capacity or less must be brought/sent to the appliance service center for repair.
THIS SECTION APPLIES TO CLOTHES WASHERS ONLY
LIMITED FIVE YEAR WARRANTY ON PLASTIC TUB
After one year and until five years from the date of purchase, Avanti Products will furnish a replacement plastic tub,
for one which is defective in material or workmanship. All labor and transportation charges are the responsibility of
the consumer.
LIMITED SEVEN YEAR WARRANTY ON STAINLESS STEEL TUB
After one year and until seven years from the date of purchase, Avanti Products will furnish a replacement plastic
tub, for one which is defective in material or workmanship. All labor and transportation charges are the
responsibility of the consumer.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
Products, including without limitation, one or more of the following:
• A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building codes
and regulations.
• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,
floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity, lightning,
power surges, structural failures surrounding the appliance, and acts of God.
• Shipping and handling costs associated with the
replacement of the unit.
• Incidental or consequential damages
• Parts and labor costs for the following will not be
• Repairs performed by unauthorized servicers.
considered as warranty:
• Service calls that are related to external problems,
• Door springs, and/or frames.
such as abuse, misuse, inadequate electrical power,
• Inner door panels, door shelves, door rails, and/or
accidents, fire, floods, or any other acts of God.
door supports.
• Failure of the product if it is used for other than it
intended purpose.
• The warranty does not apply outside the Continental
USA.
• Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to
remote areas.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding property,
including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also excluded from this
warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces and exposed parts;
Products on which the serial numbers have been altered, defaced or removed; service visits for customer
education, or visits where there is nothing wrong with the product; correction of installation problems (you are solely
responsible for any structure and setting for the product, including all electrical, plumbing and/or other connecting
facilities, for proper foundation/flooring, and for any alterations including without limitation cabinetry, walls, floors,
shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including repairs,
pro-rates, or product replacement, once this warranty has expired.
Warranty – Washing Machines
17
INSTRUCCIONES EN ESPAÑOL
Para reducir el riesgo de incendio, descarga eléctrica, o daño cuando
use su electrodoméstico, siga las siguientes precauciones.
PRECAUCION
Lea todas las instrucciones antes de usar su electrodoméstico.
Peligro o Precaución: Existe el riesgo que los niños queden atrapados.
Niños atrapados o sofocamiento NO SON un problema del pasado. Los electrodomésticos
son peligrosos aún si solo los deja en el garaje por un par de días.
Antes de desechar su equipo usado: quítele la puerta. Deje las canastas en su lugar para
evitar que los niños se queden atrapados.
No permita que los niños manejen, jueguen o entren dentro del electrodoméstico.
No limpie su electrodoméstico con líquidos inflamables.
No guarde ni use gasolina u otros líquidos inflamables cerca de este o de cualquier otro
electrodoméstico.
- Guarde estas instrucciones.-
INFORMACIONES IMPORTANTES DE SEGURIDAD
LEA TODAS LAS INSTRUCCIONES ANTES DE USAR EL EQUIPO
ADVERTENCIA
Cuando use el lavaplatos siga las instrucciones básicas indicadas a continuación
ADVERTENCIA. EL HIDROGENO ES UN GAS EXPLOSIVO
Bajo ciertas condiciones, el gas de hidrógeno se puede producir en un sistema de agua caliente que no
ha sido usado por más de dos semanas. EL HIDROGENO ES UN GAS EXPLOSIVO.
Si el sistema de agua caliente no va a ser usado por un período de tiempo, cierre todas las llaves de
agua caliente y deje correr el agua fría por varios minutos antes de usar el lavaplatos. Esto liberará
cualquier residuo de gas hidrógeno acumulado. Debido a lo inflamable de este gas, no fume o haga
fuego alrededor.
INSTRUCCIONES DE ALAMBRADO
Tipos de Cable Alambrado
Este equipo debe estar alambrado a tierra. En el evento en que ocurra alguna rotura o mal
funcionamiento, el alambrado a tierra reducirá el riesgo de descarga eléctrica proveyendo un camino
de menor resistencia para la corriente eléctrica. Este equipo viene con un cable con enchufe a tierra. El
cable debe estar conectado a un enchufe apropiado, el cual deberá cumplir todas las ordenanzas y
códigos locales.
ADVERTENCIA
La conexión inapropiada del cable a tierra incrementará el riesgo de descargas eléctricas. Verifique
con un electricista o personal de servicio calificados la conexión apropiada del equipo. Si necesita
realizar alguna modificación en el enchufe a tierra, le recomendamos contratar los servicios de un
electricista.
18
USO APROPIADO
No maltrate, se siente o se pare en la puerta o la bandeja del lavaplatos.
No toque el calentador durante o justamente después de usar el lavaplatos.
No lave artículos de plástico, a menos que estos indiquen que son aptos para lavaplatos, para los
artículos que no lleven indicación, lea las recomendaciones del fabricante.
Use sólo detergentes y aditivos de enjuague diseñados para lavaplatos automáticos. No use jabón,
detergente para ropa o detergente de lavado a mano en su equipo.
Mantenga el detergente y los aditivos de enjuague fuera del alcance de los niños. Mantenga a los
niños lejos del lavaplatos cuando la puerta esté abierta, ya que podrían quedar residuos de
detergente en el interior.
La puerta no debe quedar abierta, ya que podría causar tropiezos y caídas.
Durante la instalación, el sistema de suministro eléctrico no debe estar doblado o aplanado.
Para reducir el riesgo de accidentes, no permita a los niños jugar en o con el lavaplatos.
No utilice su lavaplatos a menos que todos los paneles interiores estén en su lugar. Abra
cuidadosamente el lavaplatos si este esta operando, existe el riesgo de una fuga de agua.
No coloque objetos pesados sobre la puerta abierta. El equipo podría inclinarse hacia adelante.
Cuando esté cargando los artículos a limpiar:
Coloque los artículos afilados de manera que no dañen el sello de la puerta.
Coloque los filos de los cuchillos hacia abajo para reducir el riesgo de cortes.
Si el cordón del enchufe está dañado, deberá ser reemplazado por el fabricante, su agente de
servicios o una persona calificada.
Deshágase de los materiales de empaque apropiadamente.
Use el lavaplatos sólo para las funciones para las que fue diseñado.
Quite la puerta del compartimiento de lavado cuando cambie o deseche un lavaplatos.
No juegue con los controles.
LEA Y SIGA CUIDADOSAMENTE ESTA INFORMACION DE SEGURIDAD
GUARDE ESTAS INSTRUCCIONES
19
CARACTERISTICAS
7
1
2
3
8
9
4
5
6
10
11
12
1 Parrilla superior
2 Brazos distribuidores
3 Parrilla inferior
7
8
9
Parrilla para tazas
Canasta para cubiertos
Filtro grueso
4 Interior de acero inoxidable
10 Dispensador de aditivo de
enjuague
5 Ensamble de filtro
6 Dispensador de detergente
11 Válvula para la entrada de agua
12 Caja eléctrica
20
CONTROL PANEL
1
2
Luz indicadora para cada ciclo
Luz indicadora para llenar el aditivo
de enjuague
7
1
2
3
3
4
Luz indicadora de encendido
Botón para encender o apagar la
unidad
5
6
7
Botón para comenzar el ciclo
Botón para seleccionar un ciclo
Ventilación
6
5
4
La luz indicadora para el ciclo seleccionado se brillará intermitentemente durante el
proceso del lavado.
La luz indicadora para el aditivo de enjuague: Brillará cuando hace falta llenar el deposito
de aditivo de enjuague.
1
2
3
4
5
La luz indicadora de encendido: Brillará cuando el lavaplatos esté encendido
Botón para encender o apagar la unidad.
Botón para comenzar el ciclo de lavado seleccionado.
Botón para seleccionar un ciclo de lavado pre-programado, Oprima el botón para
seleccionar el ciclo apropiado.
6
TABLA DE CICLO DE LAVADO
Programa
Ciclo
Información de
Selección de Ciclo
Descripción
de ciclo
Tiempo de Aditiv
Operación
(Minutos)
Enjuag
Pre-enjuague
Pre-enjuague
Lavado
Enjuague
Enjuague
Secado
Pre-enjuague
Para cargas de mucha
suciedad, como ollas,
sartenes, cacerolas y
platos con comida seca.
Para cargas de suciedad
Heavy
(Intensivo)
Lavado
Normal
125
SI
normal, como ollas, platos, Lavado
Normal
Lavado vasos y sartenes
ligeramente sucios.
Enjuague
Enjuague
Secado
Ciclo diario estándar
95
85
65
SI
SI
Para cargas de suciedad
Lavado ligera como platos, vasos, Enjuague
Ligero ensaladeras y sartenes
ligeramente sucios.
Pequeño lavado para
cargas de suciedad ligera Lavado
Cristales que no necesitan lavado
Vidrio normal.
Lavado
Light
(Economico)
Enjuague
Secado
Pre-enjuague
Enjuague
Secado
Rápido
NO
Protección contra el sobre flujo de agua
Este lavaplatos cuenta con un sistema de protección contra el sobre flujo de agua, el mismo cierra la
válvula de entrada de agua y activa la bomba de drenaje cuando el nivel del agua sube demasiado. Si
esto ocurre, cierre la llave principal de entrada de agua antes de llamar al personal de servicio. Si hay
agua en la bandeja de la base debido al sobre flujo o existe algún tipo de goteo, el agua deberá
retirarse antes de reiniciar el funcionamiento del lavaplatos.
21
Dispensador de Detergente
El dispensador debe rellenarse antes de comenzar cada ciclo de lavado de acuerdo a las instrucciones
detalladas en la tabla de ciclo de lavado. Este lavaplatos usa menor cantidad de detergente y aditivos
de enjuague que los lavaplatos convencionales. Generalmente, sólo se necesitará una cucharada de
detergente para una carga en el programa de lavado normal. Los artículos más sucios necesitaran
mayor cantidad de detergente. Siempre añada el detergente justo antes de iniciar el lavaplatos, de otra
manera podría humedecerse y no disolverse apropiadamente.
Cantidad de detergente a usar
SI EL AGUA NO ES MUY DURA, USTED PODRA PREVENIR LA FORMACION DE DEPOSITOS
AÑADIENDO DETERGENTE.
La cantidad de detergente que necesite variará dependiendo de la dureza del agua. Para determinar la
dureza del agua en su localidad, comuníquese con la compañía proveedora de agua. Mientras más
dura sea el agua, mayor será la cantidad de detergente a utilizar. Recuerde, usted debe encontrar la
cantidad de detergente que debe usar añadiendo pequeñas
cantidades hasta encontrar la medida exacta.
Quitando manchas de agua dura de los platos
Para quitar las manchas producidas por el agua dura, siga estos consejos:
Ponga los platos en el programa de lavado normal.
Quite todo objeto metálico, como cubiertos, sartenes, etc.) del lavaplatos.
No añada detergente.
Eche dos tazas de vinagre en una ensaladera, colóquela en la rejilla
inferior del lavaplatos. Inicie el programa de lavado normal.
Si esto no funciona, realice el mismo proceso usando ¼ de taza de
cristales de ácido cítrico en lugar del vinagre.
Uso adecuado del detergente
Solamente use detergente para lavaplatos.
Conserve el detergente en un lugar fresco y seco.
No vierta el detergente en polvo hasta el momento mismo de lavar los platos.
ADVERTENCIA!
El detergente para lavaplatos es corrosivo. Tenga el cuidado de mantenerlo lejos del alcance de los
niños.
DEPOSITO DE ADITIVOS DE ENJUAGUE
Para abrir el depósito, de vuelta a la tapa hacia la flecha izquierda
(“open”) y tire de ella.
Vierta el aditivo de enjuague en el depósito, tenga cuidado de no
sobrepasar el tope.
Coloque la tapa alineándola con la flecha izquierda (“open”) y dándole
vuelta hacia la flecha derecha (“close”).
Los aditivos de enjuague se liberarán durante el enjuague final para
prevenir que el agua forme gotas en sus platos las que podrían dejar
manchas y rayas. También mejoran el secado permitiendo que el agua
se escurra más fácilmente de los platos.
Este lavaplatos esta diseñado para usar aditivos de enjuague líquidos. El depósito está situado dentro
de la puerta, junto al depósito de detergente
Para llenar el depósito, abra la tapa y eche el aditivo de enjuague hasta que el indicador de nivel se
torne completamente negro. El depósito tiene capacidad para 100 ml.
Debe tener cuidado de no llenar el depósito por encima del nivel permitido, esto podría causar excesos
de espuma. Limpie con un paño húmedo cualquier derrame o salpicadura. No se olvide de colocar la
tapa en su lugar antes de cerrar la puerta del lavaplatos.
Si su localidad tiene agua blanda, no deberá usar el aditivo de enjuague ya que éste podría dejar una
capa blanca sobre sus platos.
Como usar la parrilla superior
22
Le recomendamos que coloque los artículos pequeños y los más fáciles de limpiar, en la parrilla
superior: vasos, copas, tapas, platos de servicio y ensaladeras, como se muestra en la figura.
Es preferible que coloque los platos de servicio y las tapas en los lados de la parrilla para que no
interrumpan la rotación del brazo distribuidor.
1
2
3
Tazas
Platos de taza
Vasos
4
3
1
3
2
2
Como usar la parrilla inferior
Le recomendamos que coloque los artículos grandes y los más difíciles de limpiar, en la parrilla inferior:
ollas, sartenes, tapas, platos de servicio y ensaladeras, como se muestra en la figura.
Es preferible que coloque los platos de servicio y las tapas en los lados de la parrilla para que no
interrumpan la rotación del brazo distribuidor.
Las ollas, ensaladeras, etc., se deben poner boca abajo.
Las ollas hondas deben estar colocadas de manera que permitan el flujo adecuado del agua.
La parrilla inferior se puede acomodar para que cualquier tipo de ollas y sartenes puedan ser incluídas.
4
3
4
5
6
7
8
9
Platos de sopa
Platos de frutas
Platos de pan/mantequilla
Platos de servir
Platos de comida
Canasta para cubiertos
6
5
7
6
9
8
Canasta para cubiertos
Los cubiertos se deben colocar en las áreas designadas en la canasta de cubiertos con los mangos
hacia abajo: Si la rejilla tiene canastas laterales, las cucharas deberán insertarse individualmente en
las ranuras apropiadas, los utensilios especialmente largos, deben colocarse en posición horizontal al
frente de la rejilla superior.
1
2
3
4
Tenedores
5
6
7
Cuchillos
Cucharas de servir
Tenedor de servir
Cucharitas de té
Cuchara de sopa
Tenedores
23
COMO EMPEZAR UN CICLO DE LAVADO:
Asegurase que la unidad está conectada al tomacorriente y a la entrada de agua.
Llena la unidad apropriadamente.
Agrega el detergente
Cierra la puerta
Oprima el botón de encendido
Selecciona el ciclo de lavado apropiado para su uso
Oprima el botón para empezar el ciclo (la luz indicadora parpardeará).
COMO CANCELAR O MODIFICAR UN CICLO DE LAVADO:
Para cancelar un ciclo después que haya empezado oprima el botón (START / RESET) para
aproximadamente 3 segundos.
Oprima el botón (PROG) para seleccionar el ciclo nuevo
Oprima el botón (START / RESET)
El ciclo empezará a funcionar.
LIMPIANDO LOS BRAZOS DISTRIBUIDORES
Es necesario limpiar los brazos distribuidores regularmente, los químicos del agua
dura pueden tupir el brazo distribuidor y el eje. Para sacar el brazo distribuidor,
desenrosque la tuerca para sacar el limpiador de la parte superior del brazo
distribuidor. Limpie los brazos con agua tibia y jabonosa, use una pequeña brocha
para limpiar los distribuidores. Reinstálelos después de haberlos secado.
LIMPIANDO LOS FILTROS
Es necesario sacar y limpiar el filtro periódicamente removiendo las particulas de comida en el agua de
lavado permitiendo que recircule durante el ciclo.
Ensamble del filtro.
Para mejores resultados, limpie el filtro.
El filtro remueve partículas de comida del agua de lavado, permitiendo que recircule durante el ciclo.
Por esta razón, es una buena idea quitar las grandes partículas de comida atrapadas en el filtro
después de cada ciclo de lavado enjuagando el filtro semicircular y la taza.
Para sacar el sistema del filtro, hale la manija de la taza hacia arriba. El sistema entero del filtro deberá
ser limpiado al menos una vez al mes.
Para limpiar el filtro grueso y el fino use un cepillo limpiador, luego ensamble nuevamente las partes del
filtro como se muestra en las figuras de la izquierda y reinserte el ensamblaje completo en el lavaplatos,
ubicándolo en su sitio y presionando hacia abajo.
El lavaplatos no debe usarse sin el filtro. El reemplazo inapropiado del filtro reducirá los niveles de
funcionamiento del equipo así como también dañando platos y utensilios.
ADVERTENCIA: Nunca use el lavaplatos sin filtro.
24
LIMPIANDO LA PUERTA
Para limpiar el borde alrededor de la puerta use un trapo húmedo, suave y tibio. Para prevenir el
ingreso de agua al seguro de la puerta y a componentes eléctricos, no use limpiadores en aerosol de
ninguna clase. Tampoco use limpiadores con abrasivos o paños desgrasadores ya que podrían arañar
la superficie. Algunos papeles toalla podrían también arañar o dejar marcas en la superficie.
ADVERTENCIA
Tampoco use agentes abrasivos o papel toalla áspero debido al riesgo de arañar el equipo o dejar
manchas en las superficies de acero inoxidable.
Limpiando la Bomba de Drenaje
Ocasionalmente algo caerá dentro del filtro y la bomba de drenaje. Si esto ocurre, la bomba de drenaje
empleada en este equipo, está diseñada para revertir el sistema de drenaje automáticamente, de
manera que devolverá el artículo en el desagüe. Si por algún motivo usted tuviera que retirar
manualmente un artículo de la bomba de drenaje, antes de quitar los filtros, usted deberá apagar y
desconectar el equipo de la corriente luego quitar el pequeño inserto negro del sumidero. En caso de
haber residuos de agua, estos deberán ser secados antes de proseguir. Saque el artículo que causa la
obstrucción, este debe encontrarse en el sumidero. Recuerde colocar el inserto negro antes de
re-instalar los filtros.
MANTENIMIENTO
Después de cada lavado
Cierre la llave del ingreso de agua y deje la puerta ligeramente entreabierta, de esta manera la
humedad y los malos olores no quedarán atrapados en el interior.
No use productos de limpieza solventes o abrasivos
Para limpiar las superficies exteriores y las partes de goma no use productos de limpieza solventes o
abrasivos. En lugar de estos productos use un paño limpio y agua tibia jabonosa. Para quitar manchas
u óxido de la superficie interior del equipo use un paño humedecido con agua y un poco de vinagre o un
producto de limpieza diseñado específicamente para lavaplatos.
Cuando se vaya de vacaciones
Se recomienda que realice un ciclo de lavado con el lavaplatos vacío, desenchufe el equipo, cierre la
llave de entrada de agua y deje la puerta del lavaplatos ligeramente entreabierta. Esto alargará la vida
de los sellos del equipo y prevendrá la formación de malos olores en el interior del mismo.
Sellos
Uno de los factores que causa el mal olor en el lavaplatos es la comida que queda atrapada en los
sellos. Periódicamente límpielos con una esponja húmeda, lo cual prevendrá la formación de los
mismos.
25
ANTES DE LLAMAR AL SERVICIO TECNICO
Problema
Posibles
Causas
Que hacer?
Selección de Ciclo
Use menos detergente si tiene agua blanda y
seleccione un ciclo de lavado más corto para
lavar la cristalería.
Hay una capa blanca Combinación de agua blanda y
en los platos
mucho detergente
Hay una capa
Manchas de te o café
amarilla o marrón en Los depósitos de hierro en el agua Use una mezcla de 1/2 taza de blanqueador y 3
las superficies
internas
pueden causar una capa en todo el tazas de agua tibia para quitar manualmente las
equipo
manchas.
Hay una capa blanca
en las superficies
internas
Llamar a la compañía de agua y pedir un filtro
especial.
Minerales de agua dura
Para limpiar el interior, use una esponja húmeda
con detergente para lavaplatos y use guantes de
goma.
Nunca use otra clase de limpiador que no sea el
diseñado específicamente para lavaplatos.
Reacomode los platos apropiadamente.
Siempre habrá algo de vapor que se escape por
entre la puerta durante el desagüe y el secado.
Use un limpiador abrasivo suave para eliminar
esas marcas.
Hay detergente en las Los platos bloquean las tazas de
tazas dispensadoras detergente
Vapor
Normal
Manchas negras y
grises en los platos
Artículos de aluminio junto a los
platos
Un poco de agua limpia cerca del ingreso de
agua en el fondo de la tina mantendrá el sello de
agua lubricado.
Hay agua en el fondo
de la tina
Normal
Asegúrese que el lavadero de la cocina esté
drenando bien. Si su equipo drena en un
regulador, debe limpiarlo o destupirlo.
Asegúrese de no sobrecargar el depósito de
aditivos para el enjuague. El derrame de este
fluido puede causar exceso de espuma y
derrames.
Limpie cualquier salpicadura o exceso con un
paño húmedo.
Asegúrese de nivelar correctamente el
lavaplatos.
El agua en la tina no
drena
El desagüe está tupido
Depósitos sobrecargados o el
aditivo de enjuague se está
derramando
El lavaplatos gotea
El lavaplatos hace
ruido
El lavaplatos está desnivelado
26
Registration Information
Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the following
address within 100 days from the date of purchase and receive these important benefits:
Avanti Products LLC
P.O.Box 520604 – Miami, Florida 33152
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
-------------------------------------------------------(detach here)-----------------------------------------------------------
Avanti Registration Card
Name
Model #
Serial #
Address
Date Purchased
Store / Dealer Name
City
State
Zip
E-mail Address
Occupation
Area Code
Phone Number
Did You Purchase An Additional Warranty
As your Primary Residence, Do You:
Extended
Own
Rent
None
Your Age:
Reason for Choosing This Avanti Product:
Please indicate the most important factors
That influenced your decision to purchase this
product:
under 18 18-25 26-30
31-35
36-50 over 50
Marital Status:
Married Single
Price
Product Features
Is This Product Used In The:
Avanti Reputation
Home
Business
Product Quality
Salesperson Recommendation
Other: ___________________
Friend / Relative Recommendation
Warranty
How Did You Learn About This Product:
Advertising
In-Store Demo
Personal Demo
Other: ___________________
Comments:
27
VER: DWE1800W-2.0 – 11282012
PRINTED IN CHINA
28
|