Daewoo DH 6100P User Manual

DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` A  
mac001 1200DPI 100LPI  
HELP LINE Num ber ; 0 8 7 0 1 0 0 2 5 2 5  
With queries, please quote the page number,  
reference number and model number.  
HDD/DVD Recorder  
HDD/DVD Recorder  
DH-6100P  
User Manual  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 2  
mac001 1200DPI 100LPI  
Im p o r ta n t Sa fe g u a rd s  
Im p o r ta n t Sa fe g u a rd s  
IMPORTANT FOR LASER PRODUCTS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
LASER  
This Digital Video Disc Player employs  
a Laser System. To ensure proper use  
of this product please read this  
owner’s manual carefully and retain for  
future reference. Should the unit  
require maintenance, contact an  
authorized service location - see  
service procedure.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR  
BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
Use of control adjustments or the  
performance of procedures other than  
those specified may result in  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
‘dangerous voltage‘ within the product’s  
enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock.  
hazardous radiation exposure.  
To prevent direct exposure to the laser  
beam, do not try to open the enclosure.  
Visible laser radiation when open and  
interlocks defeated.  
DO NOT STARE INTO THE BEAM.  
The exclamation point within an equilateral  
triangle is intended to alert the user to the  
presence of important operating and servicing  
instructions in the literature accompanying the  
appliance.  
DANGER Visible laser radiation when open and  
interlock failed or defeated.  
Avoid direct exposure to beam.  
CLASS 1  
LASER PRODUCT  
WARNING TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE  
THIS APPLIANCE TO RAIN OR  
MOISTURE.  
CAUTION Do not open the top cover. There are  
no user serviceable parts inside the  
Unit; leave all servicing to qualified  
service personnel.  
CAUTION  
TO PREVENT ELECTRIC SHOCK,  
MATCH WIDE BLADE OF PLUG TO  
WIDE SLOT, FULLY INSERT.  
CAUTION  
Any changes or modification in  
construction of this device which  
are not expressly approved by the  
party responsible for compliance  
could void the user’s authority to  
operate the equipment.  
2
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 3  
mac001 1200DPI 100LPI  
Im p o rta n t Sa fe g u a rd s  
RUDCTION  
This set has been designed and manufactured to  
assure personal safety. Improper use can result in  
electric shock or fire hazard. The safeguards  
incorporated in this unit will protect you if you  
observe the following procedures for installation, use  
and servicing. This unit is fully transistorized and does  
not contain any parts that can be repaired by the user.  
and to protect it from overheating. These  
openings must not be blocked or covered. These  
openings must not be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This  
unit should never be placed near or over a  
radiator or heat radiator. This unit should not be  
placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is  
provided or the manufacturer’s instructions have  
been adhered to.  
1
2
3
4
5
READ INSTRUCTIONS  
All the safety and operating instructions should  
be read before the unit is operated.  
1 0 POWER SOURCES  
RETAIN INSTRUCTIONS  
The safety and operating instructions should be  
retained for future reference.  
This unit should be operated only from the type of  
power source indicated on the marking label. If  
you are not sure of the type of power supply to  
your home, consult your dealer or local power  
company. For units intended to operate from  
battery power, or other sources, refer to the  
operating instructions.  
HEED WARNINGS  
All warnings on the unit and in the operating  
instructions should be adhered to.  
FOLLOW INSTRUCTIONS  
All operating and use instructions should be  
followed.  
1 1 POWER-CORD PROTECTION  
Power-supply cords should be routed so that they  
are not likely to be walked on or pinched by items  
placed upon or against them, paying particular  
attention to cords at plugs, mains sockets, and  
the point where they exit from the unit.  
CLEANING  
Unplug this unit from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
1 2 LIGHTNING  
6
7
8
ATTACHMENTS  
For added protection for this unit during a  
lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from  
the wall outlet and disconnect the antenna or  
cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
Do not use attachments unless recommended by  
the unit’s manufacturer as they may cause  
hazards.  
WATER AND MOISTURE  
Do not use this unit near water- for example, near  
a bath tub, wash bowl, kitchen sink or laundry  
tub, in a wet basement, or near a swimming pool.  
1 3 DISC TRAY  
Keep your fingers well clear of the disc as it is  
closing. It may cause serious personal injury.  
ACCESSORIES  
Do not place this unit on an unstable cart, stand,  
tripod, bracket, or table. The unit may fall,  
causing serious injury to a child or adult as well  
as serious damage to the unit. Use this unit only  
with a cart, stand , tripod, bracket, or table  
recommended by the manufacturer.  
1 4 OVERLOADING  
Do not overload wall outlets of extension cords  
as this can result in a risk of fire or electric shock.  
1 5 OBJECT AND LIQUID ENTRY  
Never push objects of any kind into this unit  
through openings as they may touch dangerous  
voltage points or ‘short-out’ parts that could  
result in a fire or electric shock. Never spill liquid  
of any kind on the unit.  
8 A A unit and cart combination  
PORTABLE CART WARNING  
should be moved with care. (symbol provided by RETAC)  
Quick stops, excessive force,  
and uneven surfaces may  
1 6 BURDEN  
cause the product and cart  
combination to overturn.  
Do not place a heavy object on or step on the  
product. The object may fall, causing serious  
personal injury and serious damage to the  
9
VENTILATION  
Slots and openings in the case are provided for  
ventilation to ensure reliable operation of the unit  
3
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 4  
mac001 1200DPI 100LPI  
Im p o rta n t Sa fe g u a rd s  
product.  
2 3 HEAT  
The product should be situated away from heat  
sources such as radiators, heat registers,  
stoves, or other products (including amplifiers)  
that produce heat.  
1 7 DISC  
Do not use a cracked, deformed or repaired  
disc. These discs are easily broken and may  
cause serious personal injury and product  
malfunction.  
2 4 To prevent battery electrolyte leakage, which  
may result in injury and damage to the unit or  
other objects, observe the following  
precautions;  
1 8 SERVICING  
Do not attempt to service this unit yourself as  
opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
A. All batteries must be installed with the proper  
polarity.  
1 9 DAMAGE REQUIRING SERVICE  
B. Do not mix new with old or used batteries.  
C. Only use batteries of the same type and brand.  
Unplug this unit from the wall outlet and refer  
servicing to qualified service personnel under  
the following conditions.  
D. Remove the batteries when they are not to be  
used for a long period time.  
A. When the power-supply cord or plug is  
damaged.  
B. If liquid has been spilled, or objects have fallen  
into the unit.  
E. When the batteries have become discharged,  
they must be disposed of in a safe manner  
which complies with all applicable laws.  
C. If the unit has been exposed to rain or water.  
D. If the unit does not operate normally by  
following the operating instructions. Adjust only  
those controls that are covered by the operating  
instructions. Improper adjustment of other  
controls may result in damage and will often  
require extensive work by a qualified technician  
to restore the unit to its normal operation.  
E. If the unit has been dropped or the cabinet has  
been damaged.  
2 5 WEEE (Wa ste of electrica l a nd electronic  
equipm ent)  
The meaning of the symbol on  
the product, its accessory or  
packaging indicates that this  
product shall not be treated as  
household waste. Please,  
dispose of this equipment at  
your applicable collection  
point for the recycling of  
electrical & electronic equipments waste. In the  
European Union and Other European countries  
which there are separate collection systems for  
used electrical and electronic product. By  
ensuring the correct disposal of this product,  
you will help prevent potential hazards to the  
environment and to human health, which could  
otherwise be caused by unsuitable waste  
handling of this product. The recycling of  
materials will help conserve natural resources.  
Please do not therefore dispose of your old  
electrical and electronic equipment with your  
household waste. For more detailed information  
about recycling of this product, please contact  
your local city office, your household waste  
disposal service or the shop where you  
purchased the product.  
F. When the unit exhibits a distinct change in  
performance-this indicates a need for service.  
2 0 REPLACEMENT PARTS  
When replacement parts are required, have the  
service technician verify that the replacements  
he uses have the same safety characteristics as  
the original parts. Use of replacements  
specified by the unit manufacturer can prevent  
fire, electric shock, or other hazards.  
2 1 SAFETY CHECK  
Upon completion of any service or repairs to  
this unit, ask the service technician to perform  
safety checks recommended by the  
manufacturer to determine that the unit is in  
safe operating condition.  
2 2 WALL OR CEILING MOUNTING  
The product should be mounted to a wall or  
ceiling only as recommended by the  
manufacturer.  
4
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 5  
mac001 1200DPI 100LPI  
Ta b le o f Co n te n ts  
Ta b le o f Co n te n ts  
RUDCTION  
In tro d u ctio n  
Re co rd in g  
Sa fe ty In stru ctio n s ____________________________1  
Im p o rta n t Sa fe g u a rd s _________________________2  
Ta b le o f Co n te n ts ______________________________5  
O ve rvie w ______________________________________6  
Id e n tifica tio n o f Co n tro ls ______________________1 0  
Ba sic Re co rd in g ________________________________4 1  
Recording to DVD or HDD  
One Touch Record (OTR)  
To Pause the Recording  
Playing under recording  
41  
41  
42  
42  
Tim e r Re co rd in g _______________________________4 2  
Timer Recording using Manual Set  
Record Screen  
42  
Co n n e ctio n s  
Timer Recording using VideoPlus  
system  
Canceling a Timer Recording  
Stopping a Timer Recording in  
Progress  
Timer Recording Troubleshooting  
43  
44  
Co n n e ctin g An te n n a / Ca b le ____________________1 5  
Co n n e ctin g a TV _______________________________1 5  
Co n n e ctin g a n Am p lifie r/ Re ce ive r _____________1 6  
Co n n e ctin g O p tio n a l Eq u ip m e n t ______________1 7  
Co n n e ctin g a Dig ita l Ca m co rd e r ______________1 7  
44  
44  
Re co rd in g fro m a n Ex te rn a l In p u t _____________4 5  
Du b b in g _______________________________________4 6  
Me d ia file s Co p y in g ___________________________4 7  
Se tu p  
In itia l In sta lla tio n ______________________________1 8  
Se tu p m e n u ____________________________________1 9  
Ed itin g  
Setup Menu Overview  
19  
19  
19  
22  
23  
24  
25  
26  
28  
29  
31  
31  
HDD Pla y b a ck a n d Ed itin g ____________________4 9  
Menu Navigation  
INSTALLATION Settings  
RECORDING OPTIONS Settings  
LANGUAGE Settings  
Playing a HDD title  
Deleting a HDD title  
Editing a HDD title  
Sorting a HDD title  
Dubbing a HDD title to DVD disc  
49  
49  
50  
52  
52  
PREFERENCES / Video Settings  
PREFERENCES / Audio Settings  
PREFERENCES / Parental Controls  
PREFERENCES / Auto Settings  
PREFERENCES / Hard Disk  
System Information  
Disc Ma n a g e r __________________________________5 3  
Disc Editing in DVD±RW disc  
Disc Editing in DVD±R, DVD-RW disc 55  
Title Editing  
Advanced Disc Editing  
53  
56  
57  
Restore Defaults  
O n -Scre e n Disp la y O ve rvie w __________________3 2  
Re fe re n ce  
Pla y b a ck  
Tro u b le sh o o tin g _______________________________5 9  
Te ch n ica l Sp e cifica tio n s ________________________6 1  
DVD Pla y b a ck _________________________________3 4  
Pla y in g a Pictu re o r Mu sic file s _______________3 6  
Tim e sh iftin g & Sa vin g ________________________3 9  
Time shifting in HDD mode  
Saving to HDD  
39  
40  
5
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 6  
mac001 1200DPI 100LPI  
O ve r vie w  
O ve r vie w  
O ve r vie w  
W h ich d iscs y o u ca n u se  
The following discs can be used in your HDD/DVD  
Recorder:  
Tim e Shifting  
: Simultaneous video recording and playback  
Pause and resume the live TV broadcast. Issue  
trick mode commands like fast forward, fast  
rewind, jump and instant replay  
Play a previously recorded program while  
another program is being simultaneously  
recorded  
Pla yba ck a nd recording  
DVD+RW (Digital Versatile Disc + ReWritable)  
DVD+R (Digital Versatile Disc + Write-Once)  
DVD-R (DVD-Recordable) / DVD-RW (DVD-  
Rewritable): Recording with +VR Format (Dual  
media support).  
Progra m Recording  
These discs can only be played back in other DVD  
players or recorders if the recording was made in  
Video mode‘ and the recording was finalised.  
: Recording from TV tuner or analog AV input  
Full support for VideoPlus technologies - simply  
enter the program code number (published in  
newspapers or on the internet) to setup timer  
recording  
Pla yba ck only  
DVD Video (Digital Versatile Disc)  
Audio CD (Compact Disc Digital Audio)  
CD-R (CD recordable) Audio, MP3 files  
CD-RW (CD rewritable) Audio, MP3 files  
VCD, SVCD  
Manually set up timer recording for a TV  
program or a recurring TV program  
Persona l video copying by ex terna l input  
Analog and DV camcorder tapes  
VCR tapes  
High-speed dubbing  
Not all recordable CDs may be played by your  
player.  
Select program(s) from HDD and copy them to  
DVD  
Also copy from DVD to HDD (Available with  
+VR Format, JPEG, MP3)  
Watch a TV program while high-speed dubbing  
is in progress  
Ab o u t Sy m b o ls  
Sim ple, ea sy video editing  
Rename programs, Delete programs, Split  
programs, Segment programs  
Identify and keep the desired video and remove  
the parts you do not need.  
About the  
Sym bol  
may appear on the TV screen during operation.  
This icon means the function explained in this  
User's Guide is not available on that specific disc.  
DVD Pla yba ck  
DVD, VCD, SVCD, MPEG file video, MPEG-1  
Layer 2, MP3, CD stereo audio, Dolby Digital&  
DTS digital audio output.  
Re g io n a l co d e  
If the region number on your DVD disc does not  
correspond to the region number of this player, the  
disc cannot be played.  
ALL  
2
6
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 7  
mac001 1200DPI 100LPI  
O ve rvie w  
RUDCTION  
Du a l Me d ia  
DVD, DVD+R, DVD+RW ?  
Supporting Disc  
Recording Form a t  
Fina lize  
±RW / ±R  
Wha t is a DVD?  
±Disc + VR format  
-RW, -R, +R  
DVD (Digital Versatile Disc) is a storage medium  
that combines the convenience of the compact disc  
with the latest digital video technology. DVD video  
uses modern MPEG2 data compression technology  
that enables an entire feature film to be stored on a  
single five inch disc.  
After fina lising other DVD pla yba ck  
All discs can playback  
Consum er  
Rem a rk :  
Does not need selection  
(recording format)  
How good is the resolution of DVD com pa red w ith  
VHS?  
A DVD Recorder that supports ‘dual media’  
The razor-sharp digital images have more than 500  
lines of resolution at 720 pixels per line. This is  
more than twice as high as VHS and even better  
than laser disc quality. DVD picture quality is easily  
comparable to the digital masters produced in  
recording studios.  
recording allows DVD+RW format recording (+VR)  
on either DVD-R, DVD-RW, DVD+R or DVD+RW  
media. Any editing feature that is available with the  
+RW logical format is available on any of the media  
types. This system allows the flexibility for the  
consumer to use any of the above media formats for  
recording in the same system. Since the +VR format  
is DVD-Video compatible, the consumer can take  
any disk recorded on this platform and should be  
capable of playing it back on the majority of DVD  
players on the market.  
Wha t is a DVD+RW?  
DVD+ReWritable uses ‘phase change‘ media, the  
same technology on which rewritable CDs are  
based. A high-performance laser is used to change  
the reflective properties of the recording layer; this  
process can be repeated more than a thousand  
times.  
Wha t is a DVD+R?  
Unlike a DVD+RW disc, a DVD+R (write-once DVD)  
can only be written to once. If it is not finalised  
after a recording, further recordings can be added to  
it. Old recordings can be deleted but they can no  
longer be overwritten. The deleted recordings  
(titles) are marked 'deleted title'.  
Disc-re la te d Te rm s  
Title (DVD only)  
The main film, accompanying feature content, or  
music album. Each title is assigned a title reference  
number enabling you to locate it easily.  
Before a DVD+R can be played in a DVD player, it  
must be finalised in the HDD/DVD Recorder. Once  
this process is complete, no further recordings can  
be added.  
Cha pter (DVD only)  
Sections of a movie or a musical piece that are  
smaller than titles. A title is composed of one or  
several chapters. Each chapter is assigned a  
number to enable you to easily locate the chapter  
you want. Depending on the disc, chapters may not  
be labeled.  
Wha t ca n I do w ith m y HDD/ DVD Recorder?  
Your HDD/DVD Recorder is a machine for recording  
and playing back digital video discs with ‘two-way‘  
compatibility with the universal DVD video  
standard. This means:  
Tra ck (Audio CD only)  
Sections of a movie or a musical piece on an audio  
CD. Each track is assigned a number, enabling you  
to easily locate the track you want.  
existing DVD video discs can be played on the  
recorder.  
recordings made on your HDD/DVD Recorder  
can be played on other DVD video players and  
DVD-ROM drives.  
7
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 8  
mac001 1200DPI 100LPI  
O ve rvie w  
Ab o u t DVD Re co rd in g  
Notes on Recording  
of certain U.S.patents and other intellectual  
property rights owned by Macrovision  
Corporation and other rights owners. Use of  
this copyright protection technology must be  
authorized by Macrovision Corporation, and is  
intended for home and other limited viewing  
uses only unless otherwise authorized by  
Macrovision corporation. Reverse engineering  
or disassembly is prohibited.  
The recording times shown are not exact  
because the HDD/DVD Recorder uses variable  
bit-rate video compression. This means that the  
exact recording time will depend on the  
material being recorded.  
When recording a TV broadcast, if the  
reception is poor or the picture contains  
interference, the recording times may be  
shorter.  
Discs recorded at high speeds (equal to or  
greater than 2X) may not be recognized.  
If you record still pictures or audio only, the  
recording time may be longer.  
The displayed times for recording and time  
remaining may not always add up to the exact  
length of the disc.  
The available recording time may decrease if  
you heavily edit a disc.  
When using a DVD+R disc, you can keep  
recording until the disc is full, or until you  
finalise the disc. Before you start a recording  
session, check the amount of recording time  
left on the disc.  
Recording TV Audio Cha nnels  
The HDD/DVD Recorder can record one or two  
channel audio. For TV broadcasts, this usually  
means mono or stereo, but some programs are  
broadcast in bilingual audio channel. You can record  
either BIL I, BIL II or both.  
Restrictions on Video Recording  
You cannot record copy-protected video using  
this HDD/DVD Recorder. Copy-protected video  
includes DVD-Video discs and some satellite  
broadcasts. If copy-protected material is  
encountered during a recording, recording will  
pause or stop automatically and an error  
message will be displayed on-screen.  
Video that is ‘copy-once only’ can only be  
recorded using DVD+RW discs with CPRM.  
Copyright Notice  
Audio and video recordings you make using the  
HDD/DVD Recorder are for your personal use  
only. You may not sell, lend, or rent them to  
other people.  
This product incorporates copyright protection  
technology that is protected by method claims  
8
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 9  
mac001 1200DPI 100LPI  
O ve rvie w  
RUDCTION  
Pre ca u tio n s  
Ca u tio n  
Do not mix old and new batteries. Never mix  
different types of batteries (standard, alkaline, etc.).  
Ha ndling the Unit  
When shipping the unit  
The original shipping carton and packing  
materials come in handy. For maximum  
protection, re-pack the unit as it was originally  
packaged at the factory.  
N o te s o n Discs  
When setting up the unit  
Ha ndling Discs  
The picture and sound of a nearby TV, VCR, or  
radio may be distorted during playback. In this  
case, position the unit away from the TV, VCR,  
or radio, or turn off the unit after removing the  
disc.  
Do not touch the  
playback side of the  
disc. Hold the disc by  
the edges so that  
fingerprints will not get on the surface. Do not stick  
paper or tape on the disc.  
To keep the surface clean  
Do not use volatile liquids, such as insecticide  
spray, near the unit. Do not leave rubber or  
plastic products in contact with the unit for a  
long period of time. They will leave marks on  
the surface.  
Storing Discs  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources  
of heat, or leave it in a parked car exposed to direct  
sunlight, as there may be a considerable  
temperature increase inside the car, which could  
distort the disc.  
Clea ning the Unit  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are  
extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution. Do  
not use strong solvents such as alcohol,  
benzine, or thinners, as these might damage  
the surface of the unit.  
Clea ning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc  
from the centre outward.  
Do not use strong solvents such as alcohol, benzine,  
thinners, commercially available cleaners, or anti-  
To obtain a clear picture  
The HDD/DVD Recorder is a high-tech,  
precision device. If the optical pick-up lens and  
disc drive parts are dirty or worn, the picture  
quality will be poor. Regular inspection and  
maintenance are recommended after every  
1,000 hours of use. (This depends on the  
operating environment.) For details, please  
contact your nearest dealer.  
static spray  
intended for  
older vinyl  
Yes  
No  
records.  
N o te o n HDD  
Rem ote Control Opera tion Ra nge  
Point the remote control at the remote sensor and  
press the buttons.  
Distance: Within 23 ft (7 m) of the remote sensor.  
Do not move the recorder immediately after  
switching it off. Wait at least 2minutes after  
power-off.  
Angle: Within 30° in each direction of the remote  
sensor.  
If the HDD/DVD Recorder is used improperly or  
in an unsuitable environment, it is possible that  
the HDD will fail.  
Power failure may cause data loss on the HDD.  
We recommend that you back up your  
Rem ote Control Ba ttery Insta lla tion  
Detach the battery cover on  
the rear of the remote control,  
and insert two AAA batteries.  
Make sure the polarities (+ and  
-) are aligned correctly.  
important data to DVD discs in order to protect  
against accidental loss or possible HDD failure.  
9
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 10  
mac001 1200DPI 100LPI  
Id e n tifica tio n o f Co n tro ls  
Id e n tifica tio n o f Co n tro ls  
Fro n t Pa n e l  
$
^
*
!
@
#
%
&
( ) 1  
2
3
4
!
@
Disc Tra y (DVD deck )  
Insert a disc here.  
Front Pa nel Displa y  
Shows the current status of the HDD/DVD  
Recorder.  
OPEN/ CLOSE (DVD)  
Opens or closes the disc tray.  
PLAY/ PAUSE (ENTER)  
3 AVF Input (VIDEO, L-AUDIO-R)  
Connects to the audio/video output of an  
external source (VCR, Camcorder, etc.).  
4
S-VIDEO Input  
Connects to the S-Video output of an external  
source (VCR, Camcorder, etc.).  
#
$
HDD capacity is displayed in front panel or  
Setup-Preferences-Hard Disk.  
Starts playback of a disc or HDD. Pauses  
playback or recording temporarily.  
%
^
&
*
(
STOP  
Stops playback.  
PREV/ REW  
Skips to previous chapter. Searches backward.  
NEXT/ FF  
Skips to next chapter. Searches forward.  
STANDBY/ ON  
Turns the HDD/DVD Recorder on and off.  
REC  
Starts recording. Press repeatedly to set the  
recording time.  
)
1
2
SELECT DVD/ HDD  
Toggles control between the DVD mode and  
the HDD mode.  
MENU  
Accesses media browser or return to previous  
menu.  
PR+/ – (/ )  
Scans up or down through memorized channels.  
Also moves up and down in menus.  
1 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 11  
mac001 1200DPI 100LPI  
Id e n tifica tio n o f Co n tro ls  
RUDCTION  
Fro n t Pa n e l Disp la y  
DVD MODE  
HDD MODE  
HDD/DVD Recorder is  
recording.  
Disc is loaded  
DVD Timer Recording is set  
HDD Timer Recording is set  
FRONT DISPLAY MESSAGE:Indicates  
clock,channel,current mode,OTR  
time,etc.  
Cha nnel  
Recording on HDD  
TV Channel  
PR23  
Indicates a Timer recording on HDD  
is set.  
1 1 : 1 5  
Indicates a Timer Recording on HDD  
is in standby mode.  
Input m ode  
1 1 : 1 5  
1 1 : 1 5  
0:30  
AV1 input  
AV2 input  
Au-1  
Indicates the HDD is recording.  
OTR Recording mode  
Au-2  
Recording on disc  
Others  
Indicates a DVD Timer recording is  
set.  
Indicates a DVD Timer Recording is  
in standby mode.  
Indicates when the HDD/DVD  
Recorder is locked. The front panel  
is locked by pressing and holding  
the [] button over 5 seconds on  
the remote control and is unlocked  
by pressing any key on the remote  
control.  
1 1 : 1 5  
1 1 : 1 5  
SAFE  
1 1 : 1 5  
0:30  
Indicates the DVD is recording.  
OTR Recording mode  
Indicates the HDD/DVD Recorder is  
in TV mode (set by [TV/DHR]  
button).  
TV  
RECP  
Recording Pause mode  
Indicates when the HDD/DVD  
Recorder is outputting the video  
signal in Interlaced Scan mode.  
I-S  
Indicates when the HDD/DVD  
Recorder is outputting the video  
signal in Progressive Scan mode.  
P-S  
NO  
No disc or unreadable disc  
1 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 12  
mac001 1200DPI 100LPI  
Id e n tifica tio n o f Co n tro ls  
Re m o te Co n tro l  
- Turns the HDD/DVD Recorder on and off.  
- Locks the front panel by pressing and holding it over 5 seconds.  
Opens and closes the disc tray.  
Selects DVD mode.  
Selects HDD mode.  
Not available  
HDD  
DV  
INPUT  
Switches the HDD/DVD Recorder input to RF (Tuner), AV1, AV2, AVF or S-  
VIDEO.  
- Selects numbered options in menus.  
- Selects TV channels.  
Clears previous setting of timer-recording or file name.  
Adds the title in Dubbing or Copying menu.  
Accesses media browser (or title menu) or return to previous menu.  
Displays or exits the main setup menu.  
Displays the edit menu for DVD or HDD.  
Displays information about the currently loaded disc, HDD or TV channel.  
- œ √…† : Selects menu options.  
- PR +/– : Selects channels.  
Confirms menu selections.  
- Starts playback.  
- Pauses playback or recording temporarily. Press again to exit Pause mode.  
Skips to the next or previous chapter/track.  
Searches backward/forward.  
Increases or decreases the slow motion speed when playing a DVD or HDD.  
Stops playback or recording.  
1 2  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 13  
mac001 1200DPI 100LPI  
Id e n tifica tio n o f Co n tro ls  
RUDCTION  
Starts recording. Press repeatedly to set the recording time. For more  
details, Refer to One Touch Record (OTR) on page 41.  
DUB  
Displays the Dubbing or Copy menu.  
Selects Recording mode. (Approx.)  
[DVD] HQ (1hr), SP (2hrs), EP (4hrs), SLP (6hrs)  
[HDD] HQ (16Hrs), SP (33hrs), EP (64hrs), SLP (97hrs)  
Displays the Timer Recording menu and VideoPlus menu.  
Selects a subtitle language, if available.  
Selects an audio language (DVD), audio channel (CD) or audio type (TV).  
Enlarges the video image.  
Repeats the current chapter, track, title or the entire disc.  
Repeats playback between two points (A and B).  
Searches for a specific title or a chapter.  
TV/DHR  
Switches between the HDD/DVD Recorder tuner and your TV tuner.  
Displays a disc’s Title menu, if available.  
TITLE/PBC  
P.SCAN  
Press and hold for 5 seconds to switch between Progressive Scan and  
Interlace Scan mode.  
Pro g re ssive Sca n Mo d e  
If your TV supports Progressive Scan, you can view high quality video by setting the  
HDD/DVD Recorder to Progressive Scan mode. If your TV does not support  
Progressive Scan, do NOT change to Progressive Scan mode.  
If you do so accidentally, press and hold the [P.SCAN] button for 5 seconds to  
restore normal viewing.  
When video output mode is changed from RGB to Interlace or Progressive (Scart 1)  
will not be correct colour for Component video.  
As component outputs have their own Jacks on the back side, change the TV input  
into Component input, after connecting the component cables from the HDD/DVD  
Recorder to the TV.  
Changing from Interlace or Progressive to RGB, should be the opposite of above.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS  
ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO  
BE DISPLAYED IN THE PICTURE. IN THE CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE  
CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET COMPATIBILITY 'WITH THIS MODEL 525p  
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.  
1 3  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 14  
mac001 1200DPI 100LPI  
Id e n tifica tio n o f Co n tro ls  
Re a r p a n e l  
@
%
!
#
$
^
&
*
(
)
!
@
S-VIDEO OUT  
Connect to a TV with an S-Video Input.  
AUDIO OUT (L, R)  
Connect to a TV or other equipment with audio  
inputs.  
COMPONENT VIDEO OUT (Y Pb Pr)  
Connect to a TV with Component Video (Y Pb  
Pr) inputs.  
^
AC Pow er Cord  
Plug into a power outlet.  
COAXIAL/ OPTICAL (Digita l Audio Out)  
Connect to an amplifier with a coaxial (or  
optical) digital audio input.  
Sca rt sock et 1  
Connection of a TV set. Composite-output and  
RGB-output  
ANT OUT  
Connect to a TV with an RF input.  
Cooling Fa n  
&
*
#
$
Sca rt sock et 2  
(
)
Connection of an additional device (satellite  
receiver, set-top box, video recorder,  
camcorder, etc.)  
Ca u tio n  
%
ANT IN  
Do not touch the inner pins of the jacks on the  
rear panel. Electrostatic discharge may cause  
permanent damage to the HDD/DVD Recorder.  
Connect to your antenna or cable TV outlet.  
1 4  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 15  
mac001 1200DPI 100LPI  
Co n n e ctio n s  
Co n n e ctio n s  
RUDCTION  
If your cable wire is connected to your TV without a  
converter or descrambler box, unscrew the wire  
from your TV and attach it to the RF IN (FROM ANT.)  
jack on the rear panel of the HDD/DVD Recorder.  
Use the supplied RF cable to connect between the  
HDD/DVD Recorder’s OUT (TO TV) jack and the  
antenna input jack on your TV. With this connection,  
you can receive all midband, superband, and  
hyperband channels (all cable channels).  
There are a variety of ways to connect the  
HDD/DVD Recorder to your TV and other  
equipment. Use only one of the connections  
described below. Whichever TV connection  
you use will work with all input sources.  
Please refer to the manuals for your TV, VCR,  
stereo system, or other devices as necessary to  
make the best connections.  
For better sound reproduction, connect the  
HDD/DVD Recorder’s AUDIO OUT jacks to the  
audio in jacks of your amplifier, receiver,  
stereo, or audio/video equipment. See  
‘Connecting an Amplifier/Receiver‘ on page 16.  
ETCIONS  
Co n n e ctin g a TV  
Choose one of the following TV connections,  
depending on the capabilities of your equipment.  
Ca u tio n  
Make sure the HDD/DVD Recorder is  
connected directly to the TV, and the TV is set  
to the correct video input.  
Do not connect the HDD/DVD Recorder’s  
AUDIO OUT jack to the phone in jack (record  
deck) of your audio system.  
Do not connect the HDD/DVD Recorder via  
your VCR. The DVD image could be distorted  
by the copy protection system.  
Rear of TV  
S-VIDEO  
INPUT  
ANTENNA  
INPUT  
COMPONENT/PROGRESSIVE VIDEO INPUT  
Y
Pr  
Pb  
S
C
V
R
Co n n e ctin g An te n n a / Ca b le  
1
Disconnect the antenna/cable from the rear of  
your TV.  
2
Connect this cable to the jack marked ANT IN  
(FROM ANT.) on the rear panel of the HDD/DVD  
Recorder.  
Rear of HDD/DVD Recorder  
RF Connection  
Connect the ANT OUT (TO TV) jack on the HDD/DVD  
Recorder to the antenna in jack on your TV using the  
supplied 75-ohm RF cable (R).  
Antenna  
Antenna  
Cable TV  
Wall Jack  
Flat Wire  
(300ohm)  
This set doesn’t have a modulator output. However  
it still applies the RF through Output.  
300/75ohm Adapter  
(Not supplied)  
OR  
OR  
Sca rt Connection  
1
Plug a scart cable into the scart socket EURO  
AV1 at the back of the HDD/DVD Recorder and  
the corresponding scart socket at the back of  
the TV set. (V)  
2
Plug a scart cable into the blue scart socket  
EURO AV2/DECODER at the back of the  
HDD/DVD Recorder and the corresponding  
scart socket at the back of the Decoder.  
Rear of HDD/DVD Recorder  
1 5  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 16  
mac001 1200DPI 100LPI  
Co n n e ctio n s  
S-Video Connection  
1
2
Connect the HDD/DVD Recorder’s DIGITAL  
AUDIO OUT jack (Coaxial or Optical) to the  
corresponding in jack on your amplifier. Use an  
optional digital coaxial (or optical) audio cable.  
(X)  
1
Connect the S-VIDEO OUT jack on the  
HDD/DVD Recorder to the S-Video in jack on  
your TV using an S-Video cable (S).  
2
Connect the Left and Right AUDIO OUT jacks  
from the HDD/DVD Recorder to the left/right  
audio in jacks on your TV using the audio  
cables.  
You will need to activate the HDD/DVD  
Recorder’s digital output; see ‘Audio’ Settings  
on page 25.  
Digita l Multi-Cha nnel Sound?  
Com ponent Video Connection  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
audio/video receiver that supports one or more of  
the audio formats provided by your HDD/DVD  
Recorder (MPEG 2, Dolby Digital, and DTS). Check  
the receiver manual and the logos on the front of  
the receiver.  
If your television is a high-definition or ‘digital  
ready‘ television, you may take advantage of  
the HDD/DVD Recorder’s Progressive Scan  
output for the highest video resolution possible.  
If your TV does not accept the Progressive Scan  
format, the picture will appear scrambled.  
Due to the DTS Licensing agreement, the  
digital output will be in DTS digital out when  
the DTS audio stream is selected.  
1
2
Connect the COMPONENT VIDEO OUT jacks on  
the HDD/DVD Recorder to the corresponding in  
jacks on your TV using a Y Pb Pr cable (C) if the  
component (Y, Pb, Pr) is available on your TV.  
If the audio format of the digital output does  
not match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound  
or no sound at all.  
5.1 channel digital surround sound via the  
digital connection can only be obtained if your  
receiver is equipped with a digital multi-  
channel decoder.  
Connect the Left and Right AUDIO OUT jacks  
from the HDD/DVD Recorder to the left/right  
audio in jacks on your TV using the audio  
cables.  
Be sure to set the HDD/DVD Recorder to  
Progressive Scan mode by pressing and  
holding [P.SCAN] for 5 seconds (or changing  
the ‘Video Output’ in the Setup Menu; see  
page 24).  
To see the audio format of the current DVD on  
the on-screen display, press [AUDIO].  
Progressive Scan does not work with the RF,  
Audio/Video or S-Video connections.  
The HDD/DVD Recorder does not perform internal  
(2- channel) decoding of DTS sound tracks. To enjoy  
DTS multi-channel surround, you must connect the  
HDD/DVD Recorder to a DTS compatible receiver  
via one of the HDD/DVD Recorder’s digital audio  
outputs.  
Co n n e ctin g a n Am p lifie r/ Re ce ive r  
Rear of HDD/DVD Recorder  
Connecting to a n a m plifier equipped w ith tw o  
cha nnel a na log stereo or Dolby Pro Logic ll/ Pro Logic  
Connect the Left and Right AUDIO OUT jacks on the  
HDD/DVD Recorder to the left and right audio in  
jacks on your amplifier, receiver, or stereo system,  
using the supplied audio cables (A).  
X
A
Connecting to a n a m plifier equipped w ith tw o  
cha nnel digita l stereo (PCM) or to a n Audio/ Video  
receiver equipped w ith a m ulti-cha nnel decoder  
(Dolby Digita l™, MPEG 2 , or DTS)  
OPTICAL  
COAXIAL  
DIGITAL INPUT  
L
R
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
1 6  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 17  
mac001 1200DPI 100LPI  
Co n n e ctio n s  
Co n n e ctin g O p tio n a l Eq u ip m e n t  
To receive audio/video signals from other  
equipment, connect the AVF (Audio/Video Front)  
jacks on the HDD/DVD Recorder to the audio/video  
out jacks on your external component, using  
optional audio/video cables.  
ETCIONS  
Jack Panel of Accessory Component  
(VCR, Analog Camcorder, etc.)  
Front of HDD/DVD Recorder  
1 7  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 18  
mac001 1200DPI 100LPI  
In itia l In sta lla tio n  
In itia l In sta lla tio n  
After successfully connecting your HDD/DVD  
7
8
9
The HDD/DVD Recorder detects channels  
automatically and stores them in memory.  
Recorder to your TV and other devices, this chapter  
will show you how to complete the initial  
installation.  
After finishing Auto Channel Search, set the  
clock.  
You must follow the initial installation process to  
set the time, date, channels, and language  
preferences for the HDD/DVD Recorder.  
Use [œ/] to move left/right and use [/]  
to change the settings.  
1
A Welcome‘ message is displayed on the  
screen. Make sure the RF cable from your  
antenna or cable TV jack is connected. Press  
[ENTER] to begin initial installation.  
1 0 After setting the clock, press [ENTER] to  
confirm. If you cancel the process during Initial  
Installation, you should repeat this procedure.  
2
3
4
5
Select the desired language for the on-screen  
menu using [/]. Press [ENTER] to confirm.  
Re -In sta lla tio n  
This set is equipped with the multi-tuner for  
receiving many countries' broadcasting. In order to  
receive broadcasting of different countries, follow  
as below.  
Select the desired country using [/]. Press  
[ENTER] to confirm.  
1
Press [SETUP] and select the 'Restore  
Defaults' using [œ /]. Then, RESET the set.  
(see page 31)  
Select the desired disc menu language using  
[/]. Press [ENTER] to confirm.  
Select the desired disc playback audio  
language using [/]. Press [ENTER] to  
confirm.  
2
3
Power On, then you see the 'Initial  
Installation'.  
Select the country which you want to (see  
step 3), then repeat the steps 4~10.  
6
Select the desired disc playback subtitle  
language using [/]. Press [ENTER] to  
confirm.  
Installation  
Installation  
Installation  
Please select your language to begin auto  
install procedure:  
Please select your country of use:  
UK & Ireland  
Welcome.  
English  
Switzerland  
Spanish  
French  
Danish  
Catalan  
Belgium  
Denmark  
Finland  
France  
Press [Enter] to begin auto channel search.  
Ensure aerial is connected.  
German  
Icelandic  
Germany  
Greece  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Instructions  
Setup-Exit  
Installation  
Installation  
Set Clock  
Please select disc menu language:  
Default  
E
Please set the clock:  
Searching for available TV stations:  
Installation  
Time : 13 : 00  
S
Please select disc audio language:  
F
Default  
C
Installation  
2 channels found  
Please wait...  
Date : 02 \ Jan \ 2010 (Sat)  
D
Please select disc subtitle language:  
G
Default  
English  
Instructions  
Enter-Confirm Setup-Exit Move …†  
I
Instructions  
Setup-Exit  
Spanish  
French  
Czech  
Danish  
German  
1 8  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 19  
mac001 1200DPI 100LPI  
Se tu p m e n u  
Se tu p m e n u  
Se tu p Me n u O ve r vie w  
4
5
6
Press [ENTER]. The ‘Manual Setup’ menu  
appears.  
The HDD/DVD Recorder Setup menu includes six  
categories, including: Installation, Recording  
Options, Languages, Preferences, System Info, and  
Restore Defaults. Press [SETUP] and [œ/] on the  
remote control to view the first and second levels of  
the Setup menu.  
Use [/] to select Standard‘. Press [ENTER]  
to move to the second level.  
Use [/] to select the desired ‘Standard’  
(PAL-BG, PAL-II, PAL-DK, or SECAM-L), then  
press [ENTER].  
Manual Setup  
Standard  
Me n u N a vig a tio n  
PA
Select The  
Reception  
Auto Search  
Fine Tune  
A
standard.  
1
2
3
Press [SETUP]. The Setup menu appears.  
C
PAL-BG  
Use [œ/] to select the desired category.  
PAL-II  
Decoder  
Store Channel  
Program Name  
P
While the desired category is selected, press  
[/] to move to the second level.  
PAL-DK  
STEUP  
SECAM-L  
Instructions  
Enter-Confirm Setup-Exit Move …†  
4
5
Press [ENTER] to move to the third level.  
Use [/] to select the desired setting, then  
press [ENTER] to confirm your selection.  
This set is equipped with the Multi-Tuner. You can  
search broadcasting of other countries. If the set  
can not search the channels, please Re-Install. (see  
page 18.)  
Some items require additional steps. Press  
[SETUP] at any time to return to the previous  
menu.  
7
8
Use [/] to select Reception‘. Press  
[ENTER] to move to the second level.  
6
Press [SETUP] to exit the Setup menu.  
Use [/] to select the desired broadcast  
system (Aerial or Cable), then press [ENTER].  
IN STALLATIO N Se ttin g s  
Ma nua l Set  
To complete the set-up of your HDD/DVD Recorder  
when the auto set has not stored all of the channels  
or when you wish to store a new channel.  
Aeria l: If you are using a standard antenna to  
receive channels.  
Ca ble: If you are using basic cable to receive  
channels.  
Manual Setup  
Standard  
Reception  
Auto Search  
Fine Tune  
Decoder  
PAL-BG  
Aerial  
1
2
3
Press [SETUP]. The Setup menu appears.  
Select The  
C
Use [œ/] to select Installation‘.  
Reception.  
Aerial  
While ‘Installation‘ is selected, press [] to  
select ‘Manual Set‘.  
Store Channel  
Program Name  
P
Cable  
P-01  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
1 9  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 20  
mac001 1200DPI 100LPI  
Se tu p m e n u  
9
Use [/] to select Auto Search‘.  
1 4 Use [/] to select Store Channel‘. Press  
[ENTER] to move to the second level.  
1 0 Search the real channel number by pressing  
[œ/].  
1 5 Use [/] to select program number to store  
and press [ENTER] to confirm.  
Manual Setup  
Standard  
Reception  
Manual Setup  
Standard  
PAL-BG  
Aerial  
PAL-BG  
Aerial  
CH-02  
Reception  
Auto Search  
Fine Tune  
Auto Search  
Fine Tune  
Decoder  
CH-02  
Off  
Decoder  
Store Channel  
Program Name  
Off  
Store Channel  
Program Name  
PR01  
P-01  
Select Channel  
Instructions  
To Store  
Instructions  
Enter-Confirm Setup-
Enter-Confirm Setup-Exit Move …†  
PR-01  
1 1 Select ‘Fine Tune’. You can adjust the fine  
tuning.  
1 6 Use [/] to select Program Name‘. Press  
[] to move to the second level. If your  
HDD/DVD Recorder is showing no station name  
or is showing a station name incorrectly, you  
can correct this.  
Manual Setup  
Standard  
Reception  
PAL-BG  
Aerial  
Auto Search  
Fine Tune  
CH-02  
1 7 Either select the name from the stored list or  
you create the station name and enter a 4-digit  
name. Change the letters with the [/],  
move the next letter with the [œ/].  
Decoder  
Off  
Store Channel  
Program Name  
PR01  
P-01  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Manual Setup  
Standard  
Reception  
PAL-BG  
Aerial  
1 2 Use [/] to select Decoder‘. Press [ENTER]  
Auto Search  
Fine Tune  
CH-02  
to move to the second level.  
Decoder  
Store Channel  
Program Name  
Off  
1 3 When the program is encoded (and you have a  
decoder connected to socket EURO AV2), press  
[/] to select On’ and press [ENTER] to  
confirm.  
R
Edit Channel  
Name  
Instructions  
Enter-Confirm Setup-
P
0
1
Manual Setup  
Standard  
Reception  
PAL-BG  
Aerial  
Auto Search  
Fine Tune  
CH-02  
Decoder  
Store Channel  
Program Name  
Of
Select Decoder  
State  
Off  
Instructions  
Enter-Confirm Setup-
On  
2 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 21  
mac001 1200DPI 100LPI  
Se tu p m e n u  
Auto Set  
Set Clock  
The HDD/DVD Recorder has a frequency  
1
2
Follow steps 1-2 as shown under ‘Manual Set’.  
synthesized tuner capable of receiving channels  
that include VHF Low E2~S6, VHF High S7~S36, and  
UHF S37~E69.  
Use [/] to select Set Clock‘.  
Prepa ra tion:  
Installation  
Manual Set  
Auto Set  
Connect the HDD/DVD Recorder to the desired type  
of antenna or cable TV system, as shown in  
‘Connecting Antenna/Cable‘ on page 15.  
Set Clock  
Adjust Channels  
1
2
Follow steps 1-2 as shown under ‘Manual Set’.  
While ‘Installation‘ is selected, press [/] to  
select ‘Auto Set‘.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
STEUP  
Installation  
Manual Set  
Auto Set  
3
Press [ENTER]. The ‘Set Clock’ menu appears.  
Set Clock  
Adjust Channels  
Set Clock  
Please set the clock:  
Time : 13 : 00  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Date : 02 \ Jan \ 2010 (Sat)  
Instructions  
Enter-Confirm Setup-Exit Move …†  
3
Press [ENTER] to begin the channel search.  
The tuner will automatically search for all  
available channels in your area and place them  
in the tuner’s memory.  
4
5
Enter the date and time.  
œ /(left/right): Moves the cursor to the  
previous or next column.  
Installation  
/(up/down): Changes the setting at the  
current cursor position.  
Searching for available TV stations:  
5 channels found  
Please wait...  
Press [ENTER] to confirm your setting, then  
press [SETUP] to exit the Setup menu.  
Instructions  
Setup-Exit  
After Auto Set is complete, follow the instructions  
above to make sure that Tuning Band is set  
correctly.  
2 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 22  
mac001 1200DPI 100LPI  
Se tu p m e n u  
Adjust Cha nnels  
2
3
Press [/] to select the PR number you want  
to move to.  
1
2
Follow steps 1-2 as shown under ‘Manual Set’.  
Press [ENTER]. The selected PR Will be moved  
to the new PR number.  
Use [/] to select Adjust Channels‘.  
Delete  
After tuning TV stations into your HDD/DVD  
Recorder, you may wish to delete a station.  
Installation  
Manual Set  
Auto Set  
Set Clock  
Adjust Channels  
1
Use [/] to select 'Delete' and press  
[ENTER].  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
RECO RDIN G O PTIO N S Se ttin g s  
DVD Record Qua lity  
You can set the default DVD recording quality to  
(Approx. time) : HQ (High Quality - 1 hr/disc), SP  
(Standard Play - 2 hrs/disc), EP (Extended Play - 4  
hrs/disc), or SLP (Super Long Play - 6 hrs/disc).  
3
Press [ENTER]. The Adjust Channels menu  
appears.  
Adjust Channels  
PR-01  
PR-02  
PR-03  
PR-04  
Select Channel  
Options  
1
2
3
Press [SETUP]. The Setup menu appears.  
Edit  
Use [œ/] to select Recording Options‘.  
PR-05  
Align  
PR-06  
Delete  
While ‘Recording Options‘ is selected, press  
[] to select DVD Record Quality‘.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
4
5
Press [ENTER] to move to the second level.  
Use [/] to to select the desired Record  
Quality (HQ, SP, EP, or SLP).  
4
Use [/] to select the PR number you want  
to adjust. Then press [ENTER].  
6
Press [ENTER] to confirm your selection, then  
press [SETUP] to exit the menu.  
Edit  
After tuning TV stations into your HDD/DVD  
Recorder, you may wish to put a name into any  
channel you want to.  
Recording Options  
1
2
Use [/] to select 'Edit' and press [ENTER].  
You can put a name by pressing [/] and  
[œ /].  
DVD Record Quality  
HDD Record Quality  
Auto Chapter  
Select Record  
Quality  
SLP  
3
Press [ENTER] to confirm.  
EP  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Align  
SP  
HQ  
After tuning TV stations into your HDD/DVD  
Recorder, you may wish to change the order of PR's  
you have in your set, as your preference.  
1
Use [/] to select 'Align' and press [ENTER].  
2 2  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 23  
mac001 1200DPI 100LPI  
Se tu p m e n u  
LAN GUAGE Se ttin g s  
OSD La ngua ge  
Select a language for the HDD/DVD Recorder Setup  
menu and on-screen displays.  
HDD Record Qua lity  
You can set the default HDD recording quality to  
(Approx. time) : HQ (16hrs), SP(33hrs), EP (64hrs), or  
SLP (97hrs)  
Follow the same procedure as the 'DVD Record  
Quality'.  
1
2
3
Press [SETUP]. The Setup menu appears.  
Use [œ] and [] to select Languages‘.  
Recording Options  
While ‘Languages‘ is selected, press [] to  
select ‘OSD Language‘.  
DVD Record Quality  
HDD Record Quality  
Auto Chapter  
SP  
P  
Select HDD  
4
5
6
Press [ENTER] to move to the second level.  
Quality  
SLP  
EP  
Use [/] to select the desired language.  
Instructions  
Press [ENTER] to confirm your selection, then  
press [SETUP] to exit the menu.  
Enter-Confirm Setup-Exit  
Move …†  
SP  
STEUP  
HQ  
Auto Cha pter  
Languages  
During recording, chapter markers are added  
automatically at fixed intervals. You can set this  
interval to 5 minutes, 10 minutes or 15 minutes. To  
turn off automatic chapter marking, select ‘Off‘.  
Follow the same procedure as the ‘DVD Record  
Quality’.  
OSD Language  
E
Select OSD  
Menu Language  
Subtitle Language  
Audio Language  
Language  
English  
Spanish  
Instructions  
French  
Czech  
Enter-Confirm Setup-Exit  
Move …†  
Recording Options  
DVD Record Quality  
HDD Record Quality  
Auto Chapter  
SP  
Select Auto  
Chapter  
Menu/ Subtitle/ Audio La ngua ge  
Select your preferred language for Disc Menus,  
Subtitles, and Audio soundtracks.  
Off  
5min  
10min  
15min  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Follow the same procedure as the OSD Language.  
Defa ult : The disc’s default language is selected.  
2 3  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 24  
mac001 1200DPI 100LPI  
Se tu p m e n u  
PREFEREN CES / Vid e o Se ttin g s  
Auto : Convert to the appropriate aspect ratio  
automatically.  
1
2
3
Press [SETUP].  
Video Output  
Progressive Scan Video provides the highest picture  
quality with reduced flickering.  
Use [œ/] to select Preferences‘.  
While ‘Preferences‘ is selected, press [] to  
select ‘Video‘.  
RGB : If you connect the HDD/DVD Recorder to an  
analog television using the SCART jacks, set Video  
Output to ‘RGB’.  
4
Press [ENTER]. The ‘Video‘ submenu is  
displayed.  
Interla ce or Progressive : If you connect the  
HDD/DVD Recorder to a digital television (DTV) or  
Monitor using the COMPONENT jacks, set Video  
Output to ‘Interlace’ or ‘Progressive’.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
Hard Disk  
Follow the same procedure as ‘TV Aspect Ratio’ to  
change the ‘Video Output’.  
Instructions  
Enter-Confirm Setup-Exit  
Video  
Move …†  
TV Aspect  
Auto  
Video Output  
Interlace  
TV Aspect Ra tio  
Select Video  
Output  
1
Use [/] to select TV Aspect‘ while the  
Video‘ submenu is displayed.  
Interlace  
Progressive  
RGB  
Instructions  
Enter-Confirm Setup-Exit Mo
2
3
Press [ENTER] or [] to go to the second level.  
Use [/] to select the desired ‘TV Aspect’.  
Video  
Ca u tio n  
Once the Progressive Scan setting is entered,  
an image will only be visible on a Progressive  
Scan compatible TV or monitor. Press and  
hold [P.SCAN] for 5 seconds to return to  
Interlace Scan mode.  
TV Aspect  
Video Output  
A
Select Picture  
Inte
Format  
4:3 LB  
4:3 PS  
16:9  
Instructions  
Enter-Confirm Setup-Exit Move 
Auto  
4
5
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
4 :3 LB : Select when a standard 4:3 TV is  
connected. Displays theatrical images with masking  
bars above and below the picture.  
4 :3 PS : Select when a standard 4:3 TV is  
connected. Displays pictures cropped to fill your TV  
screen. Both sides of the picture are cut off.  
1 6 :9 : Select when a 16:9 wide screen TV is  
connected.  
2 4  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 25  
mac001 1200DPI 100LPI  
Se tu p m e n u  
PREFEREN CES / Au d io Se ttin g s  
Bitstrea m  
Follow the same procedure as ‘Video’ Settings to  
select ‘Audio’ Settings.  
Select when connected to a Dolby Digital or DTS  
decoder (or an amplifier or other equipment with a  
Dolby Digital or DTS decoder).  
Preferences  
Video  
Dyna m ic Ra nge  
While watching DVD movies, you may wish to  
compress the dynamic range of the audio output  
(the difference between the loudest and quietest  
passages). This allows you to listen to a movie at a  
lower volume without losing clarity of sound. Set  
‘Dynamic Range‘ to Low or High for this effect.  
Audio  
Parental Controls  
Auto Settings  
Hard Disk  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Follow the same procedure as ‘Digital Output‘ to set  
the ‘Dynamic Range’.  
STEUP  
Digita l Output  
Audio  
1
Use [/] to select Digital Output‘ while the  
‘Audio’ submenu is displayed.  
Digital Output  
Dynamic Range  
Virtual Surround  
Bitstream  
Off  
Select Dynamic  
2
3
Press [ENTER] or [] to go to the second level.  
Range  
Use [/] to select the desired digital output  
type.  
Off  
Low  
High  
Instructions  
Enter-Confirm Setup-Exit Mo
Audio  
Digital Output  
Dynamic Range  
Virtual Surround  
Bit
Select Digital  
Output  
Virtua l Surround  
Off  
You can enjoy a simulated 3D effect from two  
speakers by setting Virtual Surround to On.  
Follow the same procedure as ‘Digital Output‘ to set  
the ‘Virtual Surround’ option.  
Bitstream  
LPCM  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Audio  
4
5
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Digital Output  
Dynamic Range  
Virtual Surround  
Bitstream  
Off  
Off  
Select Virtual  
Off  
Surround  
No signal will be output from the Digital Audio Out  
jacks.  
Off  
Instructions  
On  
LPCM  
Enter-Confirm Setup-Exit Move …†  
Select when connected to a 2 channel digital stereo  
amplifier. The HDD/DVD Recorder's digital audio  
signal will be output in the PCM 2ch format when  
you play a DVD (or HDD) recorded with a Dolby  
Digital (only for DVD) or MPEG soundtrack. If the  
DVD is recorded with a DTS sound track then no  
sound will be heard.  
2 5  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 26  
mac001 1200DPI 100LPI  
Se tu p m e n u  
PREFEREN CES / Pa re n ta l Co n tro ls  
Set Pa renta l Level  
The initial password is ‘0000‘. You must enter this  
password before you can change the Parental  
Level.  
The Parental Controls feature allows you to prevent  
DVDs from being played based on their ratings or to  
have certain discs played with alternative scenes.  
You can set the parental level from ‘ADULT’ to Kid  
safe.  
Set the new password to something other than  
'0000'.  
5
After setting the password, press [ENTER]  
while 'Set Parental Level' is displayed.  
1
2
3
Press [SETUP].  
6
7
Enter your new password.  
Use [œ/] to select Preferences‘.  
Use [/] to select the desired parental level  
and press [ENTER] to confirm.  
While ‘Preferences‘ is selected, press [] to  
select ‘Parental Controls‘. And press [ENTER].  
Off : If you select Unlock, the Lock feature is not  
active. All discs will play in full.  
ADULT to Kid sa fe: Some discs contain scenes  
not suitable for children. If you set a rating for  
the HDD/DVD Recorder, all scenes with the  
same rating or lower will be played. Higher  
rated scenes will not be played unless an  
alternative scene is available on the disc. The  
alternative must have the same rating or a  
lower one. If no suitable alternative is found,  
playback will stop. You must enter the 4-digit  
password or change the rating level in order to  
play the disc.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
Hard Disk  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
4
Use [/] to select Set Parental Level’ and  
press [ENTER]. The Password Input dialog will  
appear. Enter a 4-digit password using the [0-9]  
buttons. If this is the first time you have  
entered a password, you will be prompted to  
enter the password again to confirm it.  
Parental Control  
Set Parental Level  
Change Password  
Parental Country Cod
parental level  
Off  
ADULT  
NC-17  
R
Select the  
Set Hdd Parental Loc
Parental Control  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Set Parental Level  
Change Password  
Off  
Parental Country Code AU  
Set Hdd Parental Lock Off  
8
Press [ENTER] to confirm your rating selection,  
then press [SETUP] to exit the menu.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Parental Control  
Set Parental Level  
Change Password  
ADULT  
Change Password  
Parental Country Code AU  
Set Hdd Parental Lock Off  
Current Code  
_ _ _ _  
_ _ _ _  
Enter New Code  
Confi
Password  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Enter Password  
Instr
Setu
* * _ _  
Instructions  
Setup-Exit Enter-Confirm  
2 6  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 27  
mac001 1200DPI 100LPI  
Se tu p m e n u  
Cha nge Pa ssw ord  
Pa renta l Country Code  
1
2
3
While ‘Preferences‘ is selected, press [] to  
select ‘Parental Controls‘.  
1
While ‘Preferences‘ is selected, press [] to  
select ‘Parental Controls‘. Then press [] to  
select ‘Parental Country Code‘.  
Press [ENTER]. The ‘Parental Controls‘ submenu  
appears.  
Parental Control  
Use [/] to select Change Password‘ then  
press [ENTER].  
Set Parental Level  
Change Password  
ADULT  
Parental Country Code AU  
Set Hdd Parental Lock Off  
Parental Control  
Set Parental Level  
Change Password  
Parental Country Code AU  
Set Hdd Parental Lock Off  
ADULT  
Instructions  
Enter-Confirm Setup-Exit Move …†  
STEUP  
2
3
Press [ENTER]. Enter your current 4-digit  
password then press [ENTER].  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Use [/] to select the desired country and  
press [ENTER] to confirm.  
4
5
The ‘Change Password’ submenu appears.  
Enter your current 4-digit password.  
Parental Country Code  
Change Password  
Please select Country for Parental Setup  
Current Code  
Enter New Code  
Confirm Code  
* * * *  
* * * *  
* * _ _  
Australia  
Belgium  
Denmark  
Finland  
France  
Instructions  
Setup-Exit Enter-Confirm  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Enter a new 4-digit password. Re-enter the  
new password to confirm, press [ENTER].  
Ma ste r Pa ssw o rd  
:
If you forget your  
password, press 3,3,0,8 on the remote control  
and then press [ENTER].  
Set the new password to something other than  
'0000'.  
2 7  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 28  
mac001 1200DPI 100LPI  
Se tu p m e n u  
PREFEREN CES / Au to Se ttin g s  
Set Hdd Pa renta l Lock  
It allows you to prevent from being played the title  
parental locked in HDD video menu. You can set the  
HDD parental lock as follow.  
1
While ‘Preferences‘ is selected, press [] to  
select ‘Auto Settings‘.  
2
Press [ENTER] to display the submenu.  
1
While ‘Preferences‘ is selected, press [] to  
select ‘Parental Controls‘. And press [ENTER].  
2
Use [/] to select Set Hdd Parental Lock’  
and press [ENTER]. The Password Input dialog  
will appear. Enter a 4-digit password using the  
[0-9] buttons. If this is the first time you have  
entered a password, you will be prompted to  
enter the password again to confirm it.  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
Hard Disk  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Parental Control  
Set Parental Level  
Change Password  
ADULT  
Parental Country Code AU  
Auto Clock Set  
Auto Clock enables the HDD/DVD Recorder to set  
the clock automatically whenever it is in Standby  
mode (plugged in but powered off).  
Set Hdd Parental Lock Off  
Select the  
parental lock  
Off  
On  
Instructions  
Enter-Confirm Setup-Exit Move …†  
Auto Clock is only available for models with the VPS/PDC  
function.  
3
After setting the password, press [ENTER]  
while 'Set Hdd Parental Lock' is displayed.  
Some broadcasting stations may send the time and date  
along with the VPS/PDC data. The video will  
automatically use this time and date during the initial  
setting up procedure during normal use, and every time  
you switch the video off at the mains. If you find that this  
time and date is incorrect you can remove this feature by  
following the steps below changing it to the OFF mode,  
you will then have to manually set the time and date, see  
above.  
4
5
Enter your new password.  
Use [/] to select the desired parental level  
and press [ENTER] to confirm.  
Off : If you select Off, the Lock feature is not  
active. All titles in the HDD will play in full.  
On : If you select On, the Parental Lock feature  
is active in HDD Edit menu. To playback the  
title parental locked in HDD video menu, you  
must enter the 4-digit password. For detailed  
information, refer to page 50.  
1
Use [/] to select 'Auto Clock Set' and press  
[ENTER].  
2
Use [/] to change the 'Auto Clock Set'  
status, and press [ENTER] to confirm.  
6
Press [ENTER] to confirm your rating selection,  
then press [SETUP] to exit the menu.  
Auto Settings  
Auto Clock Set  
VPS/PDC  
On  
Select Auto  
Clock Status  
Off  
On  
Instructions  
Enter-Confirm Setup-Exit Move …†  
2 8  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 29  
mac001 1200DPI 100LPI  
Se tu p m e n u  
VPS/ PDC  
Auto Title Delete  
VPS/PDC is a service provided by some stations to  
enable you to perform timer recordings precisely  
even if the broadcaster delays the start time of the  
program slightly. The time you enter is the VPS/PDC  
time so this must be correct. Not all stations offer  
VPS/PDC, in which case the player will start at the  
time you enter and not the actual start time of the  
programme.  
If you wish to start recording at a specific time  
without it being adjusted by the VPS/PDC system in  
the event of a delay, switch VPS/PDC off otherwise  
the player will not record.  
1
Use [/] to select Auto Title Delete‘ while  
the ‘Hard Disk’ submenu is displayed. Press  
[ENTER] or [] to go to the second level.  
HDD Preferences  
Auto Title Delete  
Buffering Mode  
Jump To Internal  
Reset Hard Disk  
On  
PrSelect Auto  
5 Delete  
Off  
On  
Model : ST3160022ACE 
Instructions  
Enter-Confirm Setup-Exit Move …†  
Follow the same procedure as ‘Auto Clock Set’ to  
set the VPS/PDC’ status.  
STEUP  
2
3
4
Use [/] to select the desired option.  
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Auto Settings  
Auto Clock Set  
VPS/PDC  
On  
On  
Select VPS/  
PDC Status  
Off  
Off  
On  
With this selection, the HDD/DVD Recorder will  
stop recording and prompt the user to erase some  
titles and create more room on the HDD, if the  
[STOP] is not pressed and the recording takes all the  
available space on the hard disk drive.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
"VPS/PDC" and "Auto Clock Set" are not provided  
for some countries.  
On  
With this selection, the HDD/DVD Recorder  
overwrites un-protected titles, if the [STOP] is not  
pressed and the recording takes all the available  
space on the hard disk drive.  
PREFEREN CES / Ha rd Disk  
1
While ‘Preferences‘ is selected, press [] to  
select ‘Hard Disk‘.  
Buffer Mode  
1
Use [/] to select Buffering Mode‘ while  
the ‘Hard Disk’ submenu is displayed. Press  
[ENTER] or [] to go to the second level.  
2
Press [ENTER] to display the submenu.  
HDD Preferences  
Preferences  
Video  
Audio  
Parental Controls  
Auto Settings  
Hard Disk  
Auto Title Delete  
Buffering Mode  
Jump To Internal  
Reset Hard Disk  
On  
PrSelect Buffer  
5 Mode  
Preserve  
Refresh  
Model : ST3160022ACE 
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Instructions  
Enter-Confirm Setup-Exit Move …†  
2 9  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 30  
mac001 1200DPI 100LPI  
Se tu p m e n u  
2
3
4
Use [/] to select the desired option.  
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Reset Ha rd Disk  
This feature enables you to erase the entire content  
of the HDD. Please proceed with caution, as this  
process is irreversible.  
1
Use [/] to select Reset Hard Disk’ while  
the ‘Hard Disk’ submenu is displayed.  
Preserve  
“Preserve” maintains the content of the buffer upon  
changing the TV channel.  
2
Press [ENTER].  
Refresh  
HDD Preferences  
Refreshes the buffer upon changing the TV channel.  
Auto Title Delete  
Buffering Mode  
Jump To Internal  
Reset Hard Disk  
On  
Preserve  
5 Min  
Jum p To Interna l  
This feature enables you to skip to internal which is  
set in timeshift mode.  
Model : ST3160022ACE 80GB  
1
Use [/] to select Jump To Internal‘ while  
the ‘Hard Disk’ submenu is displayed. Press  
[ENTER] or [] to go to the second level.  
Instructions  
Enter-Confirm Setup-Exit Move …†  
HDD Preferences  
3
4
The Reset menu will appear. Use the [/]  
buttons to select ‘Yes‘ or No’ and press  
[ENTER].  
Auto Title Delete  
Buffering Mode  
Jump To Internal  
Reset Hard Disk  
On  
PrSelect Jump  
5 Internal  
Select ‘Yes‘ to begin Hard Disk Formatting.  
While hard disk is reformatted, do Not power  
Off absolutely.  
30 Sec  
1 Min  
Model : ST3160022ACE 
3 Min  
Instructions  
Enter-Confirm Setup-Exit Mo
5 Min  
Reset Hard Disk  
This will result in deletion of all  
titles on disk. Are you Sure  
2
3
4
Use [/] to select the desired option.  
Press [ENTER] to confirm your selection.  
Press [SETUP] to exit the menu.  
Yes  
No  
Instructions  
Enter-Confirm Setup-Exit  
Reformat Hard Disk  
Hard Disk currently Erasing.  
Do Not Power OFF until disk is  
fully erased.  
5
Power is turned off automatically when HDD  
reset is finished.  
3 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 31  
mac001 1200DPI 100LPI  
Se tu p m e n u  
Sy ste m In fo rm a tio n  
Re sto re De fa u lts  
System Information helps service personnel identify  
key firmware information about your HDD/DVD  
Recorder in case service is required.  
If you wish, you can reset the HDD/DVD Recorder to  
its original factory settings.  
1
2
Press [SETUP].  
Use [œ/] to select Restore Defaults‘.  
System Info  
System Version  
Restore Defaults  
If you select this function all  
settings will be removed and  
the product will be set into  
initial (factory) mode.  
System Version  
Version  
FD30902DXVL  
3.3.0  
1.9.5  
BDR-B2DX  
Main Build  
Instr
Instructions  
Micom Software  
SETUP  
Ente
Enter-Confirm Setup-Exit  
Move …†  
Loader Version  
Mov
Instructions  
Setup-Exit  
3
4
Press [ENTER].  
The Initialize menu will appear. Use the [/]  
buttons to select ‘Yes‘ and press [ENTER].  
Restore Defaults  
Are you sure you want to restore  
default settings?  
Yes  
No  
Instructions  
Enter-Confirm Setup-Exit  
Some options cannot be reset, including  
Parental Controls, Password, and Country  
Code.  
After Restoring Defaults, the unit is powered  
off automatically. At this time, if you power on  
again, the Installation menu appears. You  
must set the country, language, channel, and  
clock settings again.  
3 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 32  
mac001 1200DPI 100LPI  
O n -Scre e n Disp la y O ve r vie w  
O n -Scre e n Disp la y O ve r vie w  
The On-Screen Display provides feedback on the  
3
Use […†] to change the numbers. Press [ENTER]  
to confirm.  
status of the HDD/DVD Recorder and/or the  
currently loaded disc or HDD. To access the On-  
Screen Display (or OSD), press [DISPLAY].  
Cha pter  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
Disp la y in g Disc In fo rm a tio n  
To display information about the currently loaded  
disc or HDD:  
2
Use […†] to select the ‘Chapter‘ icon on the on-  
screen display. Press [ENTER] to display a  
submenu.  
On-screen displa y opera tion  
3
Use […†] to change the numbers. Press [ENTER]  
to confirm.  
1
Press [DISPLAY] repeatedly to display/change  
the information displayed on-screen.  
2
To remove the on-screen display, press  
[DISPLAY] repeatedly until it disappears.  
Angle  
Shows the current angle number and total number of  
angles, and changes the angle number.  
See the descriptions below for detailed  
explanations of the on-screen displays for each  
media type.  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
Some discs may not provide all the features shown  
in the on-screen display examples.  
2
Use […†] to select the ‘Angle‘ icon on the on-  
screen display. Press [ENTER] to display a  
submenu.  
Tem pora ry Feedba ck Icons  
3
Use […†] to change the numbers. Press [ENTER]  
to confirm.  
Action prohibited or not available  
Audio  
Shows the current audio soundtrack language,  
encoding method, and channel number, and changes  
the setting.  
Disc In fo rm a tio n o p tio n s fo r DVD, HDD  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
DVD  
HDD  
Title  
Chapter  
Angle  
Audio  
Subtitle  
1 of 3  
23 of 41  
1 of 1  
2. Eng  
Off  
Title  
Chapter  
Audio  
1 of 3  
23 of 41  
2. Eng  
2
Use […†] to select the ‘Audio‘ icon on the on-  
screen display. Press [ENTER] to display a  
submenu.  
Elapsed  
01:29:31  
Elapsed  
Instructions:  
Enter-Confirm Setup-Exit  
01:29:31  
3
Use […†] to change the numbers. Press [ENTER]  
to confirm.  
Instructions:  
Enter-Confirm Setup-Exit  
Move …†  
Move …†  
Subtitle  
Title  
Shows the current subtitle language, and changes the  
setting.  
Shows the current title number and total number of  
titles, and skips to the desired title number.  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
2
Use […†] to select the ‘Subtitle‘ icon on the on-  
screen display. Press [ENTER] to display a  
submenu.  
2
Use […†] to select the ‘Title‘ icon on the on-  
screen display. Press [ENTER] to display a  
submenu.  
3
Use […†] to change the numbers. Press [ENTER]  
to confirm.  
3 2  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 33  
mac001 1200DPI 100LPI  
O n -Scre e n Disp la y O ve rvie w  
Ch a n g in g th e TV Au d io Ch a n n e l  
Ela psed  
You can change the TV audio using the [AUDIO]  
button.  
Shows the elapsed playing time, and skips to the  
desired time.  
Press [AUDIO] repea tedly to cha nge the TV a udio,  
a ccording to the Broa dca st a udio signa l a s show n  
below .  
1
Press [DISPLAY] during playback. The on-screen  
display appears on the TV screen.  
2
Use […†] to select the ‘Elapsed’ icon on the on-  
screen display. Press [ENTER] to search by time.  
The submenu appears.  
STEREO Audio Signa l  
Stereo Mono Stereo  
3
4
Use […†] to change the numbers and use [œ √]  
to move left or right.  
BIL Audio Signa l  
BIL I BIL II (BIL Off) BIL I  
Within 7 seconds, press [ENTER] to confirm the  
start time. Playback starts from the selected time  
on the disc.  
MONO Audio Signa l  
Mono  
STEUP  
The current audio channel is displayed on-screen.  
For the title recorded without DVD navigation  
information, such as the one from broadcast or line  
input, ‘Elapsed’ function does not work.  
If the sound is poor quality when set to Stereo,  
you can often improve it by changing to Mono.  
When an external input is selected, the audio  
channel can be switched only to Stereo.  
Ch a n g in g TV Ch a n n e ls  
If no disc is playing, you can change TV channels  
using the [0-9] or [PR+/–] buttons on the remote  
control or [PR+/–] buttons on the front panel.  
3 3  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 34  
mac001 1200DPI 100LPI  
DVD Pla y b a ck  
DVD Pla y b a ck  
Pla y in g a DVD  
Still Picture a nd Fra m e-by-Fra m e Pla yba ck  
1
Press [DVD] to set the remote  
control to operate the DVD.  
1
Press [PLAY/PAUSE] during playback. The  
HDD/DVD Recorder will go into Still mode.  
DVD Selected  
Turn the TV on and select the  
video input source connected  
to the HDD/DVD Recorder.  
Actions are now for  
DVD  
2
You can back up or advance the picture frame-  
by-frame by pressing [FF ()] repeatedly  
during Still mode.  
Stop  
Audio system: Turn the audio  
system on and select the input  
Fa st Forw a rd/ Ba ck w a rd  
source connected to the HDD/DVD Recorder.  
1
Press [REW (œœ )] or [FF ()] during playback.  
The HDD/DVD Recorder will go into Search  
mode.  
2
3
Press [OPEN/ CLOSE] to open the disc tra y.  
Loa d your disc in the tra y w ith the pla yba ck side  
dow n (la bel side up).  
2
Press [REW] or [FF] to select the desired speed:  
√√ X2, X4, X8, X16, X32,  
(forward) or , œœ X2, œœ X4, œœ X8, œœ  
X16, œœ X32 (backward).  
4
5
Press [OPEN/ CLOSE] to close the tra y.  
œ
'LOAD' appears on the front panel display, and  
playback starts automatically. If playback does  
not start, press [PLAY (  
Disc menu may appear instead.  
)]. In some cases, the  
Slow Motion  
Press [SLOW+] or [SLOW-] to select the desired  
speed: 1/2, 1/4, 1/8,1/2, ...(forward), or 1/2, 1/4,  
1/8, 1/2, ... (backward).  
Pla ying a DVD  
When a DVD+RW or unfinalised DVD+R/-R/-RW is  
inserted, no title is played automatically but the  
current TV channel displays on the screen.  
If you want to play a title on the DVD+R (+RW), you  
must press [MENU] or [PLAY] to display the disc  
menu. Select a title to play then press [ENTER].  
Cha nging the Audio La ngua ge  
Press [AUDIO] and then press  
[
AUDIO repeatedly  
]
during playback to hear a different audio language  
or audio track.  
Subtitles  
Press [SUBTITLE] and then press  
repeatedly during playback to select among all  
available subtitle languages.  
If a Disc m e n u is d isp la y e d  
A Disc menu may be displayed when you load  
a DVD. Use the [œ √…†] buttons to select  
the title/chapter you want to view, then press  
[ENTER] to start playback. Press [TITLE] or  
[MENU] to return to the Disc menu.  
[
SUBTITLE  
]
Zoom  
The HDD/DVD Recorder will not play discs  
with Region codes different from the HDD/DVD  
Recorder. The Region code for this HDD/DVD  
Recorder is 2 (two).  
Unless stated otherwise, all operations  
described below use the remote control. Some  
features may also be available in the Setup  
menu.  
A disc which is recorded by computer at high  
speeds (greater than or equal to 2x) may not be  
recognized.  
A disc which is recorded with unauthorized  
movie material may not be played.  
A disc which is recorded by another recorder or  
not recorded correctly may not be recognized  
or played.  
The Zoom function allows you to magnify the video  
image and scroll around the enlarged image.  
1
Press [ZOOM] during Play mode to activate the  
Zoom function.  
Each press of the [ZOOM] button changes the  
Zoom level as follows: X1 (normal size) X2  
X4 X1 (normal size)  
2
3
Use the [œ √…†] buttons to scroll around the  
zoomed picture.  
To resume normal playback, press [ZOOM]  
repeatedly until the X1 (normal picture)  
appears.  
3 4  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 35  
mac001 1200DPI 100LPI  
DVD Pla y b a ck  
The Zoom function may not work on some  
DVDs (ex. Jpg..)  
The Zoom function does not work in PAUSE  
mode.  
Selecting Titles  
When a disc has more than one title, you can select  
among all available titles as follows:  
1
Press [DISPLAY] and use […†] to select the  
Title icon. Press [ENTER] to display a submenu.  
Use […†] to select the desired title number  
and press [ENTER] to confirm.  
Repea t  
1
2
3
4
To repeat the currently playing chapter, press  
[REPEAT]. ‘REPEAT CHAPTER’ appears on the  
TV screen.  
Selecting Cha pters  
When a title on a disc has more than one chapter,  
you can select among all available chapters as  
follows:  
To repeat the currently playing title, press  
[REPEAT] twice. ‘REPEAT TITLE’ appears on the  
TV screen.  
1
Press [PREV (§)] or [NEXT ()] briefly during  
playback to select the next or previous chapter.  
To repeat the whole disc, press [REPEAT] three  
times. ‘REPEAT DISCappears on the TV  
screen.  
2
To skip directly to any chapter during playback,  
press [DISPLAY]. Use […†] to select the  
Chapter icon, then press [ENTER] to display a  
submenu. Use […†] to select the desired  
chapter number and press [ENTER] to confirm.  
Each press of the [REPEAT] button changes the  
repeat mode as follows:  
[DVD] Chapter Title Disc off ➝  
Chapter ...  
PYLBACK  
Disc Menus  
[VCD] Track Disc Off Track ...  
Many DVDs contain Disc menus that allow you to  
access special features. To open a Disc menu, press  
[MENU]. Then use the […†] buttons to highlight  
your desired selection and press [ENTER].  
[CDDA, MP3] Track All Off Track ...  
A-B  
1
2
Press [MENU]. The Disc menu is displayed.  
To exit the Disc menu, press [STOP] or [HDD].  
You can repeat a scene between two points (A and  
B):  
1
Press [PLAY/PAUSE] play to the start of the  
desired scene.  
Title Menus  
2
3
4
5
Press [A-B] to mark the start point.  
Use [FF], [NEXT] to search the end point.  
Press [A-B] to mark the end point.  
1
Press [TITLE]. If the current title has a menu,  
the Title menu will appear on the TV screen.  
Otherwise, the Disc menu may appear.  
2
The Title menu may contain camera angles,  
spoken languages and subtitle options, as well  
as the chapters for the title.  
The marked scenes are repeated continuously  
until you stop the repeat by pressing [A-B]  
button again.  
Sea rch  
1
Press [SEARCH] to display  
the Search menu.  
T/  
3
œ
C
1
2
Use [œ √] to move to Title  
(T) or Chapter (C) and use  
[…†] to set the title or chapter number.  
3 5  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 36  
mac001 1200DPI 100LPI  
Pla y in g a Pictu re o r Mu sic file s  
Pla y in g a Pictu re o r Mu sic file s  
Au d io CD Pla y b a ck  
MP3 Pla y b a ck (HDD Me d ia , DVD)  
The HDD/DVD Recorder can play audio CDs on CD-  
R/RW, DVD+R/RW, DVD-R/RW.  
The HDD/DVD Recorder can play MP3 files on a  
disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or  
on HDD Media.  
1
2
Insert the disc and close the tray.  
1
Prior to playing MP3 files on disc, insert disc  
and close the tray.  
The CD Music folder tree appears. Use […†]  
to select a track or a file, then press [ENTER] or  
[PLAY].  
2
Press [MENU] to bring up the Media Browser  
and select the media (HDD Media, DVD) you  
want to play.  
Playback will stop at the end of the disc.  
3
4
Press [ENTER] and select the Music category  
using […†], then press [ENTER].  
CD Music  
Item : CD Audio  
Tr : 3/13  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
TRACK 9  
TRACK 10  
00:03:45  
00:03:46  
00:03:47  
00:03:48  
00:03:49  
00:03:50  
00:03:51  
00:03:52  
00:03:53  
00:03:54  
The MP3 folder tree appears. Use […†] to  
select a track or a file, then press [ENTER] or  
[PLAY].  
STOP  
Normal  
Playback will stop at the end of the media.  
13 Tracks  
1/13 …†  
Move-…†œ √ Edit-EDIT Select-ENTER Exit-SETUP  
DVD Music  
Item : MP3  
Tr : 10/204  
01 INTRO.MP3  
01 SHE’S MINE.MP3  
01 --,--- --- --.MP3  
3
4
5
While playing an Audio CD, use [FF] or [REW]  
for 2x speed playback.  
STOP  
01 --,--- --- --.MP3  
01 CLOSE YOUR EYES.MP3  
01 TIMELESS-S.G..MP3  
01 TOO LATE.MP3  
01 ROCK WITH YOU.MP3  
01 IT’S MY LIFE.MP3  
01 --,--- --- --.MP3  
Use [PLAY/PAUSE] to pause playback while the  
disc is playing.  
Normal  
To stop playback at any time, press [STOP].  
216 Items  
22/216 …†  
Move-…†œ √ Edit-EDIT Select-ENTER Exit-SETUP  
On the MP3 CD menu, you can display the  
folders on the disc. Use […†] to select the  
folder icon on the MP3 CD menu then press  
[ENTER]. You can also display just the tracks in  
the folders. Use […†] to select a folder then  
press [ENTER].  
Press [REPEAT] to repeat a track (file) and press  
again to repeat the whole media.  
If the disc contains JPEG files as well as MP3  
files, you can change the Play mode to display  
JPEG image files by pressing [MENU].  
3 6  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 37  
mac001 1200DPI 100LPI  
Pla y in g a Pictu re o r Mu sic file s  
JPEG Pla y b a ck (HDD Me d ia , DVD)  
The HDD/DVD Recorder can play JPEG Picture files  
on a disc such as CD-R/RW, DVD+R/RW, DVD-  
R/RW, or on HDD Media.  
6
The full size image will be displayed and a slide  
show starts automatically with a time interval  
of 10 seconds.  
1
Prior to playing Jpeg picture files on disc, insert  
disc and close the tray.  
2
Press [MENU] to bring up the Media Browser  
and select the media (HDD Media, DVD) you  
want to play.  
3
4
Press [ENTER] and select the Picture category  
using […†], then press [ENTER].  
7
8
Press [NEXT] or [PREV] to manually skip to the  
next or previous image.  
The JPEG folder tree appears. If there are  
folders which contain JPEG files, select the  
desired folder using […†] and press [ENTER].  
Press [] (or [œ]) to rotate the image (counter)  
clockwise.  
5
Select the thumbnail you want to display using  
[…†] and press [ENTER].  
DVD Pictures  
PYLBACK  
Item : JPG  
Pic : 2/143  
.. /  
IMG_0248.JPG  
IMG_0250.JPG  
IMG_0261.JPG  
IMG_0268.JPG  
IMG_0266.JPG  
IMG_0277.JPG  
IMG_0282.JPG  
9
Press [STOP] to exit the slideshow.  
24 Items  
2/24 …†  
If the disc contains MP3 files as well as JPEG  
files, you can change the Play mode to play  
MP3 files by pressing [MENU].  
When a CD contains both MP3 files and JPEG  
files, the default Play mode is JPEG image  
files.  
Move-…†œ √ Edit-EDIT Select-ENTER Exit-SETUP  
MP3 files encoded below 32kbps are not  
supported.  
3 7  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 38  
mac001 1200DPI 100LPI  
Pla y in g a Pictu re o r Mu sic file s  
Pla y in g MP3 File s Du rin g a Slid e Sh o w  
You can enjoy a slide show while listening to MP3  
music files.  
1
Prepare the Disc which includes both MP3 and  
JPEG files. Or copy the files to HDD Media  
category.  
2
3
Insert the disc. Then press [MENU] to bring up  
Media browser.  
Select the media you want to play between  
HDD Media and DVD, and go to music  
category.  
4
During playback of the MP3 files, press [MENU]  
to return to the selected media browser. The  
music playback will not stop.  
5
6
Go to Picture category, and select the image  
files and press [ENTER] to start the slide show.  
The MP3 files you selected continue to play  
during the JPEG slide show.  
The HDD/DVD Recorder can playback up to  
1000 files per disc.  
Press [œ/ ] to move up and down per 10 files  
in DVD(HDD) Pictures(Music) Browser. Either  
HDD Videos does.  
Customers should note that permission is  
required in order to download MP3 and music  
from the Internet. Our company has no right to  
grant such permission. Permission should  
always be sought from the copyright owner.  
3 8  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 39  
mac001 1200DPI 100LPI  
Tim e sh iftin g & Sa vin g  
Tim e sh iftin g & Sa vin g  
Tim e sh iftin g in HDD m o d e  
If you are using the default value of “Setup –>  
Preferences –> Hard Disk –> Buffer mode –>  
Refresh”, and change Channels, the Time shifting  
buffer data will be lost. No message will be  
provided prior to doing so. However, if you set  
“Setup –> Preferences –> Hard Disk –> Buffer  
mode –> Preserve”, and change Channels, the Time  
shifting buffer data will be maintained.  
When the HDD/DVD Recorder is turned on or you  
press the [HDD] button on the remote control or the  
[DVD/HDD] button on the front panel to move to  
HDD mode from other menus, the last viewed TV  
channel will be tuned in and Time shifting starts  
automatically. Time shifting allows ‘pausing’ the  
live TV broadcast for up to 60 minutes. At any time,  
the viewing can resume. Press [PLAY/PAUSE] to  
pause the broadcast, press [PLAY/PAUSE] again to  
resume TV viewing. If the system is paused for 60  
minutes, it will automatically resume TV viewing.  
During Time shifting, a Timer recording may come  
up. As you cannot watch one program in Time  
shifting and record another channel, the HDD/DVD  
Recorder will prompt you to confirm if you want to  
keep the current channel or proceed with Timer  
recording. If there is no response, this combination  
assumes Timer recording should be started. The  
message will appear 5 seconds before the TImer  
recording is due.  
Time shifting is stored in a buffer that contains 60  
minutes of recording. After 60 minutes, the buffer  
will be progressively overwritten. If you need to  
keep the video contained in this buffer for future  
usage, you can Save all or part of the buffer.  
12 : 34  
13 : 34  
LIVE  
PYLBACK  
Press [STOP] to return to the live broadcast.  
Na viga tion in Tim e Shifting m ode  
You can navigate in Time shifting mode and control  
the output by using the following remote control  
keys:  
Changes the channel  
Fast Forward. Press to cycle  
through 2, 4, 8, 16, 32X speeds.  
Fast Rewind. Press to cycle  
through 4, 8, 16, 32X speeds.  
Slow forward/reverse. Press to  
cycle through 1/2, 1/4 or 1/8  
speeds.  
Jumps back to the 'jump to  
interval' time is set in the setup  
menu.  
Jumps forward to the 'jump to  
interval' time is set in the setup  
menu. Refer to page 30.  
3 9  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 40  
mac001 1200DPI 100LPI  
Tim e sh iftin g & Sa vin g  
Sa vin g to HDD  
If th e u n it is se t a s “ Se tu p –> Pre fe re n ce s  
–> Ha rd Disk –> Au to Title De le te –> O n ”  
Sa ve  
if the [STOP] is not pressed and the recording  
takes all the available space on the hard disk  
drive, the HDD/DVD Recorder will erase  
unprotected titles to the amount of about 10  
hours in HQ mode (approx. 40GB) and keep  
recording.  
While viewing a program, press [REC]. This will  
start saving the segment you are watching. You can  
navigate forward. During the saving operation, by  
pressing [REC], you will increase the length of the  
program you are saving by 15 minutes up to a  
maximum of 10 hours. Press [STOP] to indicate the  
end of the saving operation. In case of recording a  
part of Time shifting buffer, the buffer will be  
empty.  
If th e u n it is se t a s “ Se tu p –> Pre fe re n ce s  
–> Ha rd Disk –> Au to Title De le te –> O ff”  
if the [STOP] is not pressed and the recording  
takes all the available space on the hard disk  
drive, the HDD/DVD Recorder will stop  
recording and prompt the user to erase some  
titles and create more room on the HDD.  
If you want to stop recording in Time shifting  
specific operation (FF, REW, STILL, etc), press  
[STOP] to return to LIVE mode and then press  
[STOP] again.  
You can not change the channel or the source if  
saving is on-going (the end of the recording  
segment is either not entered, or in case of a long  
recording, it has not been reached.) Saving has to  
be manually stopped first ( by pressing [STOP].) The  
HDD/DVD Recorder will prompt you to Stop saving  
first. The segment will be saved on the HDD and  
then channel or source change will be performed.  
The saved program will be removed from the Time  
shifting buffer when it is about to be overwritten by  
a Live recording. During recording from the Time  
shifting buffer, [PLAY/PAUSE] dose not work as  
pause(play) the recording but work as pause(play)  
the broadcast in the buffer.  
Indicates  
recording to  
the HDD and  
Rec Speed  
recording  
Indicates Time shifting operation: PLAY,  
STILL, LIVE, STOP, FF, REW, etc  
Other Opera tions in TIm e shifting sa ving m ode  
While in Time shifting saving mode, you can use the  
following keys for other operations: HDD, DVD,  
MENU, OPEN/CLOSE, SETUP, INPUT, P.SCAN  
buttons.  
4 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 41  
mac001 1200DPI 100LPI  
Ba sic Re co rd in g  
Ba sic Re co rd in g  
Re co rd in g to DVD o r HDD  
5
6
Press [REC ( )] once.  
If you press [DVD] or [HDD], you will be in DVD or  
HDD mode.  
You can start recording to DVD or HDD by pressing  
the [REC] button. (In the case of a DVD, it must be a  
recordable media in the tray.)  
Recording will start. The REC indicator lights on  
the front panel display.  
Recording continues until you press [STOP] or  
the disc is full.  
To record for a fixed length of time, see One  
Touch Record.  
1
Turn on the HDD/ DVD Recorder a nd loa d a  
recorda ble disc .  
Press [STOP ()] to stop recording.  
Make sure your TV input is set to view the  
HDD/DVD Recorder.  
The maximum number of DVD titles per disc is  
49. If the HDD/DVD Recorder is powered off  
during DVD recording, the recording will not be  
saved.  
If a DVD+RW or unfinalised DVD±R, DVD-RW  
disc is inserted in the tray, no title is played  
automatically after loading is finished.  
If you are recording to a blank DVD±R (±RW)  
disc, it may take up to 7 minutes (it depends on  
the disc) for post processing after recording.  
Select the media to record by pressing [DVD] ,  
[HDD], or [DVD/HDD] on the front panel.  
2
Set the desired Recording m ode by pressing [REC  
SPEED] repea tedly.  
Available  
disc (or  
HDD)  
Record Mode  
Record Mode  
Dvd record quality  
now set to :  
Hdd manual record  
quality set to :  
space will  
be  
displayed  
by  
HQ 0Hrs 58Mins  
HQ 27Hrs 13Mins  
PYLBACK  
selecting  
recording  
mode.  
Stop  
LIVE  
O n e To u ch Re co rd (O TR)  
One Touch Recording allows you to add recording  
time in fixed increments at the touch of a button.  
3
4
Set the desired Recording source by pressing  
[INPUT] or [TV/ DHR].  
1
2
Follow steps 1 -4 under Recording from TV.  
You can select which video input you want to  
record from the following options are available.  
TV, AV1, AV2, AVF, S-VIDEO Input  
Press [REC ( )] repea tedly to set the length of the  
recording.  
Press [AUDIO] to select the a udio cha nnel to  
record (Stereo, BIL, or Mono).  
Recording starts after the first press. Each  
subsequent press increases the recording time  
by 15 minutes within the available space (DVD)  
or 10 hours (HDD). The recording time is  
displayed on the front panel.  
The table below shows what audio channel will  
be recorded with different settings and  
different types of broadcasts.  
The last column (Monitor Audio) shows what  
you will hear during recording. For example, if  
the TV broadcast is in Stereo, then setting the  
HDD/DVD Recorder to Stereo will record the  
broadcast in Stereo, and the Monitor Audio will  
also be in Stereo.  
Bro a d ca st Au d io  
L Ch R Ch  
Mo n ito r  
Au d io  
TV  
Bro a d ca st  
Se le cte d  
Au d io  
MONO MONO MONO MONO  
MONO  
STEREO  
STEREO  
L
R
STEREO  
MONO MONO MONO MONO  
BIL I  
BIL II  
(BIL Off)  
BIL I  
BIL II  
(BIL I)  
BIL I  
BIL II  
(BIL I)  
BIL I  
BIL II  
(BIL Off)  
BIL  
4 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 42  
mac001 1200DPI 100LPI  
Tim e r Re co rd in g  
Tim e r Re co rd in g  
To Pa u se th e Re co rd in g  
Tim e r Re co rd in g u sin g Ma n u a l Se t  
Re co rd Scre e n  
1
Press [PLAY/PAUSE] to pause the disc during  
recording.  
The Timer Recording function allows you to record  
up to 8 programs within a period of one month.  
2
To continue recording in DVD mode, press  
[PLAY/PAUSE] or [REC ()].  
1
Insert recorda ble m edia such a s DVD±R,  
DVD±RW if you a re recording to DVD.  
To quit One Touch Recording, press and hold  
[STOP] for 5 seconds.  
The HDD/DVD Recorder will automatically  
power off when One Touch Recording ends.  
You cannot record on the HDD and DVD at the  
same time.  
Pressing [PLAY/PAUSE] during HDD recording  
does not act as record pause but time shifting  
still. Recording is still under way and other  
time shifting operation (FF, REW, etc) works  
properly.  
2
Press [TIMER].  
The ‘Select Record Method’ menu appears.  
Select Record Method  
Please choose your preferred  
method for scheduling  
Manual edit timer  
VideoPlus  
Timer Recording  
PR No. Date Start End Mode  
Instruct
---- --/-- --:-- --:-- ---  
Enter-Co
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
Instructions  
Pla y in g u n d e r re co rd in g  
1
Press [MENU] to play DVD or HDD during  
recording. Then Media Browser appears.  
Enter-Edit Setup-Exit Move …†  
2
In Media Browser, Select and play the media  
you want to view among HDD and DVD.  
3
Select ‘Ma nua l edit tim er’ w ith [/ ] a nd confirm  
w ith [ENTER].  
The ‘Timer Recording’ menu appears.  
Use […†] to move to a timer recording slot,  
You can’t play a DVD disc during DVD  
recording.  
The maximum number of titles that can be  
recorded on the HDD is 254.  
Using the HDD allows you to record a  
maximum of 10 hours continuously.  
and press [ENTER] to modify it.  
If you did not set the clock on the HDD/DVD  
Recorder, you must do so before programming a  
timer recording.  
Media - Choose desired media (DVD or HDD)  
using […†].  
PR No. – Choose the desired channel, or one of  
the external inputs from which to record.  
Date Choose a date up to 1 month in  
advance, or select a daily or weekly program.  
• Start Time – Set the recording start time.  
End Time – Set the recording end time.  
Mode Choose a Record mode.  
HQ, SP, SLP or EP  
Repeat-Choose frequency of the recording.  
Once, Daily, Weekly, Weekday.  
4 2  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 43  
mac001 1200DPI 100LPI  
Tim e r Re co rd in g  
finishes to confirm the recorded program. If  
two timer recordings are set to record  
sequentially (one right after the other), the very  
beginning of the later program may not be  
recorded.  
4
Enter the necessa ry inform a tion for your Tim er  
Recording(s).  
œ √ Moves the cursor left/right.  
…† Changes the setting of the current  
cursor position.  
Press [SETUP] to exit the Timer Record menu.  
Press [ENTER] after filling in all the program  
information.  
Press [TIMER] to display the Timer Record List.  
Tim e r Re co rd in g u sin g Vid e o Plu s  
sy ste m  
Thanks to this programming system, you no longer  
need to tediously enter the date, programme  
number, start and end time. All the information  
needed by the HDD/DVD Recorder for programming  
is contained in the VideoPlus programming number.  
This VideoPlus number is found in most TV listings.  
Edit Timer  
Media  
PR No.  
Date  
Start  
End  
Mode  
Repeat  
Delete  
PR-03  
02/Jan Sun  
13:30  
14:30  
HQ  
Once  
Instructions  
Enter-Save Setup-Exit  
1
Insert recorda ble m edia such a s DVD±R,  
DVD±RW if you a re recording to DVD.  
5
Press [ENTER] to sa ve the progra m .  
2
Press [TIMER].  
The Timer Record List will appear.  
The ‘Select Record Method’ menu appears.  
Timer Recording  
PR No. Date Start End Mode  
PR03 02/01 13:30 14:30 HQ  
---- --/-- --:-- --:-- ---  
---- --/-- --:-- --:-- ---  
Select Record Method  
Please choose your preferred  
method for scheduling  
VideoPlus  
Manual edit tim
VideoPlus  
EOCRDING  
6
7
Press [SETUP] to ex it the Tim er Record List.  
Please enter your VideoPlus Code.  
– – – – – – – – –  
Tim er indica tor w ill light or sta rt blink ing. You  
m ust pow er off the HDD/ DVD Recorder to sta rt  
the Tim er Recording.  
Instructions  
Enter-Confirm Set
The Timer indicator lights on the front panel  
display when the HDD/DVD Recorder is ready  
for the Timer Recording.  
3
Select ‘VideoPlus’ w ith [/ ] a nd confirm w ith  
[ENTER].  
The ‘VideoPlus’ menu appears.  
Enter the entire ‘VideoPlus’ number. This  
number is up to 9 digits long and can be found  
next to the start time of the TV programme in  
your TV listings magazine.  
The timer indicator will flash if any of the  
following conditions occur;  
- Empty or non-recordable disc is found in the  
tray when DVD Timer recording starts.  
- When you go into Media browser, SETUP,  
Timer Recording menu after Timer Recording  
setup.  
- When you record the TV signal after Timer  
Recording setup.  
- When you play titles after Timer Recording  
setup.  
The HDD/DVD Recorder will automatically  
power off when the Timer Recording ends.  
There is a short delay when a timer recording  
e.g.: 5-234-89 or 5 234 89  
Enter 523489 for the ‘VideoPlus’ number.  
If you make a mistake, you can clear it with  
[CLEAR].  
4
Press [ENTER] to confirm .  
4 3  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 44  
mac001 1200DPI 100LPI  
Tim e r Re co rd in g  
Tim e r Re co rd in g Tro u b le sh o o tin g  
5
The decoded information appears after  
confirmation. You can go back at any time to  
change the information by pressing [ENTER].  
Select the appropriate input field using […†].  
If required, change the information using  
[…†].  
If all the information is correct, press the  
[ENTER] button. The programming information  
is stored in a TIMER block.  
Even if a Tim er Recording is set, the HDD/ DVD  
Recorder w ill not record if:  
No disc is loaded.  
A non-recordable disc is loaded.  
Lock Disc’ is set to ON in the DISC Settings  
menu; see page 54.  
There are already 49 titles recorded on the disc  
or 254 titles recorded on the HDD.  
Timer Recording  
You ca nnot enter a Tim er Recording if:  
PR No. Date Start End Mode  
PR03 02/01 13:30 14:30 HQ  
---- --/-- --:-- --:-- ---  
A recording (dubbing, copying) or playing titles  
is already under way.  
----
Edit Timer  
----
The start time has already passed.  
Eight Timer Recordings have already been set.  
Media  
----
PR No.  
PR-03  
02/Jan Sun  
----
Date  
----
If tw o or m ore Tim er Recordings overla p:  
Start 13:30  
----
End 14:30  
Instr
Mode HQ  
The earlier program takes priority.  
When the earlier program finishes, the later  
program starts.  
Ente
Repeat  
Delete  
Once  
Instructions  
Enter-Save Setup-Exit  
If two programs are set to start at exactly the  
same time, the program entered first takes  
priority.  
6
7
Press [SETUP] to ex it the Tim er Record List.  
Confirm a tion is not possible w hen:  
Tim er indica tor w ill light or sta rt blink ing. You  
m ust pow er off the HDD/ DVD Recorder to sta rt  
the Tim er Recording.  
The DISC Lock setting is set to ON.  
There are already 49 titles recorded on the disc  
or 254 titles recorded on the HDD.  
VideoPlus is not available for some countries.  
If the disc is damaged, the recording may not  
complete successfully, even if the Check field  
shows ‘Rec. OK‘.  
Ca n ce lin g a Tim e r Re co rd in g  
Re co rd in g Prio rity  
You can clear a Timer Recording any time before  
the recording actually starts.  
Timer Recording and OTR (One Touch Record)  
have the same priority but they have lower  
priority than manual recording. During manual  
recording, Timer Recording or OTR will be  
ignored.  
Use […†] to select the program you want to  
erase on the Timer Recorder List, then press  
[ENTER] to modify it. Use [œ √] to select  
'Delete' then press [ENTER].  
The cooling fan continues to work when a Timer  
recording is set and VPS/PDC is turned ON,  
because the HDD/DVD Recorder has to get time  
data from the station.  
Or just press [CLEAR] on the Timer Recorder  
List.  
Sto p p in g a Tim e r Re co rd in g in  
Pro g re ss  
After a Timer Recording has started, you can still  
cancel the program by pressing and holding [STOP]  
for 5 seconds.  
4 4  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 45  
mac001 1200DPI 100LPI  
Re co rd in g fro m a n Ex te rn a l In p u t  
Re co rd in g fro m a n Ex te rn a l In p u t  
Re co rd in g fro m Ex te rn a l Co m p o n e n ts  
You can record from an external component, such  
as a camcorder, VCR or Digital Camera, connected  
to any of the HDD/DVD Recorder’s external inputs.  
1
Ma k e sure the com ponent you w a nt to record  
from is connected properly to the HDD/ DVD  
Recorder; see pa ges 1 5 ~1 7 .  
2
3
4
Use [PR+/ –] or [INPUT] to select the ex terna l input  
to record from .  
Loa d a recorda ble disc if you a re recording onto  
a DVD. And then select HDD or DVD to record.  
Set the desired Recording m ode by pressing [REC  
SPEED] repea tedly.  
Available disc (or HDD) space will be displayed  
by selecting recording mode.  
5
6
Press [REC ( )] once.  
Recording will start. The REC indicator lights on  
the front panel display.  
Recording continues until you press [STOP] or  
the disc (or HDD) is full.  
To record for a fixed length of time, see ‘One  
Touch Record‘ on page 41.  
Press [STOP ()] to stop recording.  
If your source is copy-protected, you will not be  
able to record it using the HDD/DVD Recorder.  
See ‘Copyright Notice‘ on page 8 for more  
details.  
EOCRDING  
4 5  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 46  
mac001 1200DPI 100LPI  
Du b b in g  
Du b b in g  
Dubbing will copy the selected titles (+VR format)  
with the same properties (title name, duration,  
index picture, chapter mark) in HDD Videos to  
DVD or vice versa.  
The Media BROWSER can not be activated in the  
middle of dubbing, that means play, stop, any edits  
does not work.  
HDD to DVD Dubbing  
Add  
1. Title PR-01 ----  
Start Dubbing 2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
Dub : 0 Titles  
7. Title PR-06 ----  
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
Du b b in g fro m HDD to DVD  
HDD Space : 99% 13 Titles  
1/13 …†  
Move- …†
HDD to DVD Dubbing  
1
Prior to selecting titles for dubbing, you need to  
insert a recorda ble disc into the tra y.  
The DVD+HDD Combination may take a few  
moments to format the disc if it is used for the  
first time, determine compatibility and free  
recordable space. During this time you will see  
the Disc Loading logo.  
Add  
Start Dubbing HDD to DVD Dubbing  
This will dub 1 title(s)  
The Time Shift Buffer will stop  
Continue?  
Yes  
No  
Dub : 1 Titles  
HDD Space : 99% 13 Titles  
1/13 …†  
2
Press [DUB], then 'Media Dubbing' a ppea rs.  
Move- …† Select-ENTER Exit-SETUP  
HDD to DVD  
Dubbing Completed  
You can see the titles in your HDD browser and  
will select them to be dubbed to DVD.  
3
4
Select 'HDD to DVD' using […†] a nd press  
[ENTER].  
When dubbing process is completed, the tray will  
be open automatically.  
Select the title you w a nt to dub using […†] a nd  
press [ENTER] to a dd.  
Then select more titles using […†] and press  
[ADD].  
Repeating the same process, you can add many  
titles.  
You can see charged space you selected in  
DVD with progress bar in red, also how many  
titles you selected to be dubbed and free space  
in DVD.  
5
If you select a ll the titles you w a nt to dub, select  
‘Sta rt Dubbing’ using […†].  
Press [ENTER] to confirm, then Dubbing will be  
started.  
Media Dubbing  
HDD to DVD  
DVD to HDD  
HDD to DVD Dubbing  
Date : 22/06/05 1. Title PR-01 ----  
Time : 11/16  
2. Title PR-02 ----  
Length : 00:13 3. Title PR-03 ----  
Quality : HQ  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
7. Title PR-06 ----  
Dub : 0 Titles  
Move-
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
HDD Space : 99% 13 Titles  
1/13 …†  
Move- …† Select-ENTER Exit-SETUP  
4 6  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 47  
mac001 1200DPI 100LPI  
Me d ia file s Co p y in g  
Me d ia file s Co p y in g  
Du b b in g fro m DVD to HDD  
Co p y in g a n d Ed itin g m e d ia file (DVD,  
HDD)  
1
Prior to selecting titles for dubbing, you need to  
insert a disc to be dubbed into the tra y.  
Copying will copy the media files (jpg, mp3) in  
HDD Media to DVD, or vice versa.  
2
3
Press [DUB], then 'Media Dubbing' a ppea rs.  
HDD Media to HDD Media copy (DVD to DVD) is  
also available.  
If you want to copy media files on your DVD to HDD,  
these files will be saved in each category (HDD  
Pictures, Music) of HDD Media and they cannot be  
saved in HDD Video.  
The folders in the HDD media browser can be  
viewed in any category, but the jpg files in folders  
can only be viewed in HDD Pictures.  
Mp3 files in the folder can only be viewed in the  
same way and either in DVD Media browser.  
Select 'DVD to HDD'' using […†] a nd press  
[ENTER].  
4
Select the title you w a nt to dub using […†] a nd  
press [ENTER] to a dd.  
Then select more titles using […†] and press  
[ADD].  
Repeating the same process, you can add many  
titles.  
5
If you select a ll the titles you w a nt to dub, select  
‘Sta rt Dubbing’ using […†].  
If you want to copy media files in HDD Media to  
your DVD, Disc recorded with DVD Video format  
cannot be supported.  
Press [ENTER] to confirm, then Dubbing will be  
started.  
Media BROWSER can not be activated in the middle  
of Copying, that means play, stop, any edits do not  
work.  
Media Dubbing  
HDD to DVD  
DVD to HDD  
1
Select the desired m edia to copy from .  
Then enter the HDD Media Brow ser (or HDD  
Media Brow ser).  
DVD to HDD Dubbing  
Date : 22/06/05 1. Title PR-01 ----  
Press [MENU] to enter the HDD Media Browser  
(or DVD Media Browser).  
Time : 11/16  
2. Title PR-02 ----  
Length : 00:13 3. Title PR-03 ----  
Quality : HQ  
4. Title PR-04 ----  
Move-
5. Title PR-05 ----  
DVD to HDD Dubbing  
Use [] to select HDD Pictures or HDD  
Music (or DVD Pictures or DVD Music), then  
press [ENTER].  
EOCRDING  
Add  
Dub : 0 Titl
1. Title PR-01 ----  
Start Dubbing 2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
DVD Space 
6. Title PR-06 ----  
DVD to HDD Dubbing  
HDD Media Browser  
Move-
Add  
HDD Pictures  
HDD Music  
55 Pictures Files  
Start Dubbing DVD to HDD Dubbing  
This will dub 1 title(s)  
TheTimeShiftBuffer willstop…†  
Continue?  
Yes  
UP  
Dub : 1 Titles  
No  
DVD Browser  
DVD Pictures  
DVD Music  
55 Pictures Files  
DVD Space : 99% 13 Titles  
1/13 …†  
DVD to HDD  
Move- …† Select-EN
Dubbing Completed  
2
If you want to edit a folder including copy,  
select the folder you want to edit using [  
and press [EDIT].  
]  
- Create Folder : Create folder where you want  
- Delete Folder  
4 7  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 48  
mac001 1200DPI 100LPI  
Me d ia file s Co p y in g  
- Copy Folder : Copy folders including all files in  
the folder.  
- Open : Open the media and folder you want to  
copy to.  
- Rename Folder  
- Copy Here : Copy to the media immediately  
after confirmation message.  
- Create folder : Create folder in the media you  
want to copy to.  
HDD Music  
Create Folder  
Delete Folder  
Copy Folder  
Rename Folder  
DVIX/  
1/  
MU/  
6
After selecting the destina tion to be copied, select  
'Copy here' a nd press [ENTER].  
02_LIVIN ON PRAYER.MP3  
Select 'YES' and press [ENTER] to confirm, the  
Copy process will be started.  
Select the title you w a nt to copy using […†]. Then  
select 'Edit‘ using […†] a nd press [ENTER].  
HDD Music  
Copy Completed  
Play  
DVIX/  
View Info  
Edit  
1/  
MU/  
DivX copy works only in Divx model.  
To format a DVD±RW disc that contains  
media files (mp3, jpg), press [SETUP] to return  
to DVD-EE MODE. Press [REC] and then [YES]  
to confirm, the disc format will be started.  
When the copy process is completed the tray  
will open automatically.  
HDD Media (Picture,Music) capacity is  
limited to 10% of HDD. (Approx. 16GB for  
160GB Model, 8GB for 80GB Model)  
02_LIVIN ON PRAYER.MP3  
HDD Music  
Delete  
Copy  
DVIX/  
1/  
MU/  
4572 MB Free  
Create Folder  
02_LIVIN ON PRAYER.MP3  
Se
Move-…†  
3
Select 'Copy‘ using […†] a nd press [ENTER]. Or  
just press [DUB].  
Using the same procedure as Dubbing, repeat  
the process; select the titles using [] and  
press [ADD], you can add as many titles you  
want. ‘Media Copy’ will appear.  
4
5
Select 'Done' a nd press [ENTER] a fter selecting a ll  
the titles you w a nt to copy, a nd then 'Media  
Copy - Select Destina tion' a ppea rs.  
Select the m edia you w a nt to copy to a nd press  
[ENTER].  
HDD Media Copy  
Remove  
Done  
DVIX/  
1/  
MU/  
02_LIVIN ON PRAYER.MP3  
Copy : 1 files  
7MB  
HDD Media Copy - Select Destination  
Open  
HDD  
Copy Here  
Create Folder  
DVD  
4572 MB Free  
Move-…†œ √ Select
Copy : 1 files  
2B  
4 8  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 49  
mac001 1200DPI 100LPI  
HDD Pla y b a ck a n d Ed itin g  
HDD Pla y b a ck a n d Ed itin g  
This section ex pla ins va rious functions of HDD editing.  
Or press [PLAY/PAUSE] to play the title.  
At first, go to ‘HDD Videos’ m ode.  
6
To stop playback at any time, press [STOP].  
Then it will return to media browser.  
1
Press [HDD] to select HDD  
mode.  
7
To leave the media browser mode, press  
[SETUP].  
HDD Selected  
Actions are now for  
HDD  
Still Picture a nd Fra m e-by-Fra m e Pla yba ck ,  
Fa st Forw a rd/ Ba ck w a rd, Slow Motion,  
Zoom , A-B, Sea rch , Selecting Titles  
Same with ‘DVD Playback’. (Fast rewind : x4, x8,  
x16, x32)  
Live  
2
3
Press [MENU] to enter the  
media browser.  
While ‘HDD Videos‘ is selected, press [ENTER]  
to go to the ‘HDD Videos’ page.  
Repea t  
While playing the HDD, each press of the [REPEAT]  
button changes the repeat mode as follows:  
Chapter Title Disc off Chapter ...  
Media Browser  
HDD Videos  
HDD Media  
DVD  
Multimedia files  
HDD Videos  
De le tin g a HDD title  
Date : 22/06/05 1. Title PR-01 ----  
Time : 11/16 2. Title PR-02 ----  
Length : 00:13 3. Title PR-03 ----  
Follow these instructions to delete a title from the  
Title List.  
Quality : HQ  
4. Title PR-04 ----  
Move-
5. Title PR-05 ----  
6. Title PR-06 ----  
7. Title PR-06 ----  
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
4
5
6
7
Select the title to be erased using [ENTER].  
Then select ‘Delete‘ using [… †].  
Press [ENTER] to erase the title.  
Free Space : 99% 13 Titles  
1/13 …†  
EOCRDING  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Select 'Yes' and press [ENTER] to confirm.  
HDD Videos  
Play  
1. Title PR-01 ----  
2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
Pla y in g a HDD title  
Delete  
Edit  
Sort  
Follow these instructions to play back a scene from  
the Title List.  
Dubbing  
HDD Videos  
4
5
Select the title to playback using [ENTER].  
1. Title PR-01 ----  
2. Title PR-02 ----  
Play  
ETDING  
Delete  
Edit  
3. Title PR-03 ----  
Then select ‘Play‘ using [… †]. Press [ENTER]  
to play the title.  
Sort  
4. Title PR-04 ----  
Free Sp
Move-Dubbing  
5. Title PR-05 ----  
6. Title PR-06 ----  
7. Title PR-06 ----  
HDD Videos  
HDD Videos  
Play  
1. Title PR-01 ----  
2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
7. Title PR-06 ----  
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
Play  
Delete  
Delete  
Edit  
Delete Title  
Free Sp
Edit  
Move-Dubbing  
Are you sure you want to delete?  
Sort  
Sort  
Dubbing  
YES  
NO  
Free Space : 99% 13 Titles  
1/13 …†  
Free Space : 99% 13 Titles  
1/13 …†  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
4 9  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 50  
mac001 1200DPI 100LPI  
HDD Pla y b a ck a n d Ed itin g  
Ed itin g a HDD title  
4
5
6
7
8
9
Select the title to be locked using [ENTER].  
Select ‘Edit’ using [… †] .  
Rena m ing (La beling) a Title  
Follow these instructions to rename a title list  
name,i.e., to edit the title of a recorded program.  
Press [ENTER] to go to submenu.  
Select ‘Parental Lock’ using [… †] .  
Press [ENTER] to lock the title.  
4
5
6
7
8
9
Select the title to be labeled using [ENTER].  
Select ‘Edit’ using [… †] .  
If you enter the password, the title is locked.  
Press [ENTER] to go to submenu.  
Select ‘Name’ using [… †] .  
1 0 Lock icon ‘ ’ will appear in front of Title name.  
1 1 To ‘Unlock’ the title, select ‘Unlock’ in step 7.  
Press [ENTER] to change the title name.  
The Keyboard Menu will be displayed. Use [  
√…†] to select a character or function and  
press [ENTER].  
œ
HDD Videos  
Name  
Parental Lock 2. Title PR-02 ----  
Unprotect  
Video Edit  
1. Title PR-01 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
7. Title PR-06 ----  
8. Title PR-06 ----  
CLR : Clear the title name / SP : Space / DEL :  
Delete a character / SAVE : Save the title name  
1 0 After the new title name is complete, select  
HDD Videos  
‘SAVE’ and press [ENTER].  
Date : 22/06/05 1. Title PR-01 ----  
Time : 11/16  
2. Title PR-02 ----  
Free Spa
Length : 00:13 3. Title PR-03 ----  
Move-…†
Quality : HQ 4.TitlePR-04----  
HDD Videos  
5. Title PR-05 ----  
Play  
1. Title PR-01 ----  
2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
6. Title PR-06 ----  
Delete  
Edit  
7. Title PR-06 ----  
8. Title PR-06 ----  
Sort  
9. Title PR-06 ----  
Dubbing  
10. Title PR-06 ----  
Free Space : 99% 13 Titles  
1/13 …†  
HDD Videos  
Name  
1. Title PR-01 ----  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Parental Lock 2. Title PR-02 ----  
Unprotect  
Video Edit  
3. Title PR-03 ----  
4. Title PR-04 ----  
Free Spac
5. Title PR-05 ----  
Move-…†
6. Title PR-06 ----  
. -
HDD Videos  
Name  
Parental Lock  
Title PR-01 ----  
Protecting a Title  
Unprotect CLR SP DEL SAVE  
Free Space
Video Edit 1 2 3 4 5 6 7 8 9 0  
A B C D E F G H I  
J
If you want to protect a title from accidental  
recording, editing, or erasing, you can protect the  
title. Later, if you change your mind, you can  
unprotect the title.  
Move-…†
K L M N O P Q R S T  
U V W X Y Z (  
: ; & !  
)
.
,
Free Space : 99% 13 Titles  
1/13 …†  
4
5
6
7
8
9
Select the title to be protected using [ENTER].  
Select ‘Edit’ using [… †] .  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Press [ENTER] to go to submenu.  
Select ‘Protect’ using [… †] .  
Pa renta l Lock  
This menu will appear only when you set to 'On' in  
'Setup - Preferences - Parental Controls - Set Hdd  
Parental Lock' menu.  
When you lock a program, the parental password  
selected in the Setup menu will be used.  
Press [ENTER] to protect the title.  
Protect icon will appear at the back of Title  
name.  
1 0 To ‘Unprotect’ the title, select ‘Unprotect’ in  
The user will be asked to Unlock the program before  
Play or any Edit or Dubbing operation.  
step 7.  
5 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 51  
mac001 1200DPI 100LPI  
HDD Pla y b a ck a n d Ed itin g  
Hide Cha pter :  
HDD Videos  
Name  
1. Title PR-01 ----  
Use to hide or unhide chapter markers in the  
title. Depending on whether a chapter is  
currently hidden or unhidden, one of the  
following options will be available :  
Hide : press [ENTER] to hide the current chapter  
during playback.  
Unhide : press [ENTER] to unhide the current  
chapter during playback.  
Note : You can use this feature to remove  
commercials during playback by inserting chapter  
markers at the start and end of a commercial  
interruption and hiding the chapter created.  
Parental Lock 2. Title PR-02 ----  
Protect  
3. Title PR-03 ----  
4. Title PR-04 ----  
Video Edit  
HDD
V
i
d
e
o
s
Date : 22/06/05 1. Title PR-01 ----  
Time : 11/16 2. Title PR-02 ----  
Length : 00:13 3. Title PR-03 ----  
Quality : HQ 4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
Free Space
7. Title PR-06 ----  
Move-…† S
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
Free Space : 99% 13 Titles  
1/13 …†  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Cha nge Index Picture :  
Use to edit the title index picture. When  
highlighted by pressing [ENTER], the image on  
the screen is used as the new title index  
picture.  
Editing a Title  
Split Title :  
Use to divide the title into two separate titles.  
When highlighted by pressing [ENTER], the  
current title is divided into two separate titles  
at the point where [ENTER] is pressed.  
4
5
6
7
8
9
Select the title to be edited using [ENTER].  
Select ‘Edit’ using [… †] .  
Press [ENTER] to go to submenu.  
Select ‘Video Edit’ using [… †] .  
Press [ENTER] to go to HDD Edit menu.  
The HDD Edit Menu will be displayed.  
HDD Videos  
Name  
Parental Lock 2. Title PR-02 ----  
Unprotect  
Video Edit  
1. Title PR-01 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
Title :  
HDD Edit  
Press [ENTER] and select the title you want to  
edit using [… †].  
Title  
1 of 2  
Chapter  
Edit Chapters  
1 of 11  
Free Spac
Hide Chapter  
Move-…†
Cha pter :  
Change Index Picture  
Split Title  
Press [ENTER] and select the chapter you want  
to edit using [… †].  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Edit Cha pters :  
ETDING  
Use to create, delete and edit chapter markers  
in the title. Use the cursor button to choose one  
of the following options :  
Add : when highlighted, creates a new chapter  
marker at the point in the title where [ENTER] is  
pressed.  
Delete : when highlighted and [ENTER] is  
pressed, deletes the last chapter that was  
created in the title.  
Delete all : when highlighted and [ENTER] is  
pressed, deletes all chapter markers within the  
title.  
Please note that any edits made will not be in  
effect until [MENU] or [STOP] button is  
pressed. During this time, the HDD/DVD  
Recorder will update the title with the edits  
made. Once the update is complete, the edits  
will be available the next time the title edited  
is played back.  
Press [MENU] or [STOP] to exit from editing  
menu.  
You can enter into HDD Edit menu directly by  
pressing [EDIT] button.  
5 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 52  
mac001 1200DPI 100LPI  
HDD Pla y b a ck a n d Ed itin g  
So r tin g a HDD title  
Du b b in g a HDD title to DVD d isc  
Follow these instructions to sort a title from the  
Title List by varying the order.  
Follow these instructions to copy the title(s)  
selected with the same properties (title name,  
duration, index picture, Lock, Chapter Mark)  
information over to DVD.  
4
5
6
7
8
Select the title to be sorted using [ENTER].  
Then select ‘Sort‘ using [… †].  
4
5
6
Select the title to be dubbed using [ENTER].  
Press [ENTER] to go to submenu.  
Then select ‘Dubbing‘ using [… †].  
Select ‘Record Date’ using [… †] .  
Press [ENTER] to sort the list by record date.  
Record Date : sorts by record date.  
Alphabetical : sorts by alphabetical order.  
Press [ENTER] to go to HDD to DVD Dubbing’  
menu.  
7
The ‘HDD to DVD Dubbing’ Menu will be  
displayed. For more detailed information about  
‘HDD to DVD Dubbing’ procedure, go to page  
46.  
Delete Order : sorts by record date and displays  
protected titles at the end.  
HDD Videos  
Play  
1. Title PR-01 ----  
2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
6. Title PR-06 ----  
Protected : sorts by protected titles.  
Delete  
Edit  
Sort  
HDD Videos  
Dubbing  
Play  
1. Title PR-01 ----  
2. Title PR-02 ----  
3. Title PR-03 ----  
4. Title PR-04 ----  
5. Title PR-05 ----  
Delete  
Edit  
HDD to DVD Dubbing  
Date : 22/06/05 1. Title PR-01 ----  
Sort  
Time : 11/16  
2. Title PR-02 ----  
Dubbing  
HDD Videos  
Length : 00:13 3. Title PR-03 ----  
Free Space
Quality : HQ  
Move-…† S
4. Title PR-04 ----  
Record Date  
1. Title PR-01 ----  
5. Title PR-05 ----  
Alphabetical 2. Title PR-02 ----  
6. Title PR-06 ----  
Delete Order 3. Title PR-03 ----  
Dub : 0 Titles  
7. Title PR-06 ----  
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
Protected  
4. Title PR-04 ----  
5. Title PR-05 ----  
Free Space
6. Title PR-06 ----  
Move-…† S
7. Title PR-06 ----  
8. Title PR-06 ----  
9. Title PR-06 ----  
10. Title PR-06 ----  
Free Space : 99% 13 Titles  
1/13 …†  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
Free Space : 99% 13 Titles  
1/13 …†  
Move-…† Select-ENTER Back-MENU Exit-SETUP  
5 2  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 53  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
Disc Ma n a g e r  
This section ex pla ins edit functions for the entire disc a nd for the titles in the disc.  
At first, go to ‘Disc Menu’ m ode.  
For recordable DVD media, such as DVD±R and  
DVD±RW discs, you can manage the disc using the  
Disc Menu.  
The DVD±R Disc Menu allows you to rename your  
disc or finalise it so it will be compatible with most  
other DVD players.  
1
2
Press [MENU] to go to Disc Menu’ menu.  
If you want to display ‘Title Edit’ menu, press  
[] in ‘Disc Menu’ menu. Go to Title Editing’  
on page 56~57.  
3
4
If you want to display ‘Disc’ top menu, press  
[] in ‘Disc Menu’ menu. The Disc top Menu  
shows you disc information, such as disc type,  
number of recordings, total titles, free space,  
etc.  
The DVD±RW Disc Menu allows you to erase, lock,  
or unlock your disc. You can also make it compatible  
with most other DVD players.  
If you want to display ‘Disc Edit’ menu, press  
[] Disc’ top menu. Go to Disc Editing’ on  
page 53~55.  
Disc Ed itin g in DVD±RW d isc  
Press  
[MENU]  
then  
At first, go to ‘Disc Edit’ m ode.  
1
2
3
Press [MENU] to go to Disc Menu’ menu.  
Press []. ‘Disc’ Top menu will be displayed.  
Press []. ‘Disc Edit’ menu will be displayed.  
1. TITLE  
02/01/2004  
03:24:48  
HQ 00:03:21  
2. TITLE  
02/01/2004  
03:24:48  
Disc Inform a tion  
Press  
[] then  
SP 00:01:12  
EMPTY TITLE  
4
Use [œ/] to select the ‘Information’ menu.  
EMPTY  
The Disc ‘Information’ Menu shows you disc  
information, such as disc type, number of  
recordings, total titles, free space, etc.  
Step1] ‘Disc Menu’ menu  
Play Title  
Press [Enter] to begin  
playback of title.  
Press  
[] then  
NTSC  
MY DVD  
EMPTY  
Instructions  
Enter-Confirm  
NTSC  
Information  
02/01/2004  
DVD  
Type  
DVD+RW  
5
DVD  
EDIT  
06:43:08  
Step2] ‘Title Edit’ menu  
Recordings  
EDIT  
Total Title 00:57:57  
Free Space 01:48:48  
Finalized  
Locked  
Compatible  
Press  
[] then  
-
No  
Yes  
Instructions  
Setup-Exit  
EDTING  
Step3] ‘Disc’ top menu  
NTSC  
Information  
DVD  
EDIT  
Type  
DVD+RW  
5
Recordings  
Total Title 00:57:57  
Free Space 01:48:48  
Finalized  
Locked  
Era se the disc (DVD±RW)  
-
No  
Compatible Yes  
4
5
Use [œ/] to select Erase the disc’ menu.  
Instructions  
Setup-Exit  
If you want to erase the whole disc, press  
[ENTER].  
Step4] ‘Disc Edit’ menu  
6
To confirm, select ‘Yes. To cancel, select ‘No‘.  
If you select ‘Yes‘ and press [ENTER], all the  
contents of the disc will be lost.  
5 3  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 54  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
Ma k e Com pa tible  
'Make Compatible' for a DVD+RW will  
automatically create a menu screen for navigating  
the disc. This menu screen is accessible by pressing  
[TITLE].  
Erase the disc  
Press [Enter] if you want  
to erase the d
Erase the disc  
existing recor
Erase the disc?  
be cleared.  
All recordings will be lost.  
Yes  
No  
4
Use [œ/] to select Make Compatible‘ for  
DVD+RW. Press [ENTER] as shown on the  
screen.  
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm Move …†  
5
Select 'Yes' using [] and press [ENTER] to  
make the disc compatible.  
DVD±R discs cannot be locked (unlocked) or  
erased.  
6
7
Press [ENTER] again.  
Press [SETUP] to go to the top disc menu.  
Lock / Unlock Disc (DVD±RW)  
If you want to protect a disc from accidental  
recording, editing, or erasing, you can lock the disc.  
Later, if you change your mind, you can unlock the  
disc.  
Make Compatible  
Press [Enter] to make any  
previous title editing  
compatible with your DVD  
player.  
4
Use [œ/] to select  
Lock/Unlock Disc’. Press  
[ENTER] as shown on the  
screen.  
Make Compatible  
Make disc compatible with  
your DVD player.  
Lock/Unlock Disc  
Instructions  
Yes  
Press [Enter] to lock the  
disc. This prevents future  
disc operations or  
recordings.  
Enter-Confirm  
No  
Make Compatible  
Finished.  
This Disc should already  
be compatible.  
5
You can see the current  
disc status (Locked or  
Unlocked).  
Instructions  
ok  
Enter-Confirm M
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm Move …†  
6
7
You can change the disc status by selecting  
Yes‘ and pressing [ENTER]. The ‘Changing Disc  
Status’ bar will appear. This process takes a  
few seconds.  
‘Make Compatible’ can take up to 3-4 minutes  
depending on the type of disc, how much is  
recorded on the disc, and the number of titles  
on the disc.  
If you do not make your DVD+RW disc  
compatible, your edits will not be recognized  
by other DVD players.  
It may take over 7 minutes for finalizing the  
edited disk, you must wait till the set finishes  
the finalizing operation.  
After the process  
Lock/Unlock Disc  
is finished the  
menu disappears  
automatically.  
Disc is unlocked.  
Do you want to lock it?  
Yes  
No  
Lock/Unlock Disc  
Changing disc lock status.  
Instructio
Enter-Co
Please wait a moment....  
5 4  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 55  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
Disc Ed itin g in DVD±R, DVD-RW d isc  
Fina lise  
Finalising a DVD±R (or DVD-RW) ‘locks’ its  
recordings in place so the disc can be played on  
most standard DVD players or computers equipped  
with DVD-ROM drives.  
Cha nge Disc Na m e  
You can rename your disc to any name you choose.  
The default disc name is ‘MY DVD‘.  
4
Use [œ/] to select Change Disc Name‘. Press  
[ENTER] as shown on the screen.  
5
6
The Keyboard Menu appears.  
4
Use [œ/] to select Finalise Disc‘ for a DVD±R  
(or DVD-RW). Press [ENTER] as shown on the  
screen.  
Use [œ √…†] to select and press [ENTER] to  
enter the name of the disc.  
5
Select 'Yes' using [] and press [ENTER] to  
finalise the disc.  
CLR : Clear the disc name / SP : Space / DEL :  
Delete a character / SAVE : Save the disc name  
6
7
Press [ENTER] again.  
7
8
Press [ENTER] again.  
Press [SETUP] to go to the top disc menu.  
To save the name of the disc, select ‘SAVE‘ and  
press [ENTER].  
Once you have finalised a DVD±R (or DVD-RW) disc,  
you cannot edit or record anything else on that disc.  
If ‘Lock Disc’ is set to ‘On’ in the DISC Settings  
menu, you cannot rename your disc; see page 54.  
Finalise Disc  
Finalise Disc  
Press [Enter] if you want to  
finalise the disc.  
No changes can be made  
afterwards. Continue?  
Change Disc Name  
Press [Enter] to change  
the disc name.  
Yes  
No  
Change Disc Name  
MY DVD  
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm Move …†  
CLR SP DEL SAVE  
Change Disc Name  
1 2 3 4 5 6 7 8 9
A B C D E F G H I
Problem.  
Instructions  
Enter-Confirm  
K LM N O P Q R S
This disc is locked. It  
U VW X Y Z (  
; &  
)
.
cannot be renamed.  
ok  
:
Enter-Confirm Move …†  
Instructions  
Enter-Confirm Move …†  
ETDING  
5 5  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 56  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
Title Ed itin g  
Cha nge Na m e  
To change the name of a title:  
You can manage the titles on your DVD±R/±RW  
discs using the Title menu.  
4
5
6
Select ‘Change Name’ using [œ √] .  
Press [ENTER] to change the title name.  
At first, go to ‘Title Edit’ m ode.  
1
2
Press [MENU] to go to Disc Menu’ menu.  
The Keyboard Menu will be displayed. Use [  
√…†] to select a character or function and  
press [ENTER].  
œ
Select the desired title you want to manage  
using […†].  
3
Press []. ‘Title Edit’ menu will be displayed.  
CLR : Clear the whole title. / SP : Add a space /  
DEL : Delete a character / SAVE : Save the title  
name  
Pla y a Title  
To play a title:  
7
After the new title name is complete, select  
‘SAVE’ and press [ENTER].  
4
5
Select ‘Play Title' using [œ √] .  
Press [ENTER] to play the title.  
Change Name  
Change Name  
Press [Enter] to change  
the title name.  
TITLE  
CLR SP DEL SAVE  
1 2 3 4 5 6 7 8 9 0  
A B C D E F G H I J  
K LM N O P Q R S T  
Play Title  
Press [Enter] to begin  
playback of title.  
U VW X Y Z (  
; &  
)
.
,
:
Instructions  
Enter-Confirm  
Enter-Confirm Move …†  
EMPTY  
Instructions  
Enter-Confirm  
Era se a Title  
4
5
6
Select ‘Erase Title‘ using [œ √].  
Press [ENTER] to erase the title.  
Select 'Yes' and press [ENTER] to confirm. The  
Erase Title progress bar will be displayed. This  
may takes several seconds.  
7
After erasing is complete, the erased title  
remains as an empty title.  
You can erase titles on DVD±RW discs only.  
Erase Title  
Press [Enter] to er
this title.  
Erase Title  
Erase Title  
Would you like to Era
the title?  
Yes  
No  
Title is being erased.  
Please wait a moment...  
Instructions  
Enter-Confirm  
Instructions  
Enter-Confirm Move 
5 6  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 57  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
Ad va n ce d Disc Ed itin g  
Record Option  
To set DVD±R and DVD±RW recording options:  
When you insert a DVD±R or DVD±RW disc already  
recorded by your HDD/DVD Recorder, you can edit  
the titles and chapters in a variety of ways.  
4
Select ‘Record Options’ using [œ √] and press  
[ENTER].  
At first, go to ‘DVD Edit’ m ode.  
5
Select your preferred record options for each  
disc type:  
1
2
Press [MENU] to go to Disc Menu’ menu.  
Select the recorded title you want to edit using  
[…†].  
For DVD±R  
The last recorded title :  
Allows you to append your new recording to  
the end of your last recording, or record it as a  
new title.  
3
Press [EDIT]. ‘DVD Edit’ menu will be displayed.  
1. TITLE  
02/01/2004  
Others :  
03:24:48  
HQ 00:03:21  
Allows you to record your new title until the  
end of the disc.  
2. TITLE  
02/01/2004  
03:24:48  
For DVD±RW  
SP 00:01:12  
EMPTY TITLE  
EMPTY  
The last blank title :  
Allows you to record your new title until the  
end of the disc.  
The last recorded title :  
Allows you to record over your last recorded  
title and then stop.  
Allows you to record over your last recorded  
title and continue recording until the end of the  
disc.  
Allows you to append your new recording to  
the end of your last recording. (option)  
Others :  
Allows you to record over the title and then  
stop.  
Allows you to record over the title and continue  
recording until the end of the disc.  
Titles a nd Cha pters  
When you insert a DVD±R or DVD±RW disc already  
recorded by your HDD/DVD Recorder, all titles  
recorded on the disc appear on your screen. If a  
selected title has chapters, you can skip to the next  
or previous chapter by pressing [NEXT] or [PREV].  
You can also see how many chapters are in a title  
by pressing [DISPLAY] during playback.  
Title  
DVD Edit  
To select a specific title:  
Title  
1 of 2  
Chapter  
1 of 11  
1
2
3
Use […†] to select  
‘Title.  
Select Title  
Edit Chapte
Hide Chapt
1 of 2  
Change Ind
Split Title  
Press [ENTER] to display  
the submenu.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
EDTING  
Record Options  
Record Options  
You can choose  
Press [Enter] to select  
a method for overwriting  
this title.  
Overwrite then stop  
Overwrite and continue  
(Append to existing)  
Use […†] to select the  
desired title number and then press [ENTER].  
Cha pter  
Instructions  
Enter-Confirm Move …†  
Instructions  
Enter-Confirm  
To select a specific chapter:  
DVD Edit  
1
2
3
Use […†] to select  
‘Chapter‘.  
Title  
1 of 2  
1 of 11  
Chapter  
Edit Chapters  
As overwriting function may take several minutes to  
finish and save recording, we recommend to delete  
the title and record function.  
Hide Cha
Select Chapter  
Press [ENTER] to display  
the submenu.  
Change In
1 of 11  
Split Title  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Use […†] to select the  
5 7  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 58  
mac001 1200DPI 100LPI  
Disc Ma n a g e r  
desired chapter number and then press  
[ENTER].  
Split Title  
This feature allows you to split a title into two  
titles.  
Edit Cha pters  
You can add a chapter marker anywhere in a title  
during playback.  
Once the chapter is marked, you can use the  
chapter search feature as described above.  
You can add/delete chapter markers or delete all  
chapter markers in a title.  
1
2
3
Use […†] to select 'Split  
Title'.  
DVD Edit  
Title  
1 of 2  
Press [ENTER] to display  
the submenu.  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
Change Index Picture  
Split Title  
Use […†] to select 'Yes'  
if you prefer to split the  
title.  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
DVD Edit  
1
2
3
Use […†] to select Edit  
Chapters‘.  
Title  
1 of 2  
1 of 11  
4
Press [ENTER] at the  
point where you want to divide the  
title into two separate titles  
Chapter  
Split the title  
in two?  
Yes  
Edit Chapters  
Hide Chapter  
Press [ENTER] to display  
the submenu.  
Change Ind
Choose the edit  
Split Title  
No  
Function  
Instructions  
Add  
Use […†] to select one  
of the various chapter  
marker functions (Add,  
Delete, or Delete All).  
Enter-Conf
Delete  
Split Title  
Splitting title into 2 titles.  
Move …†  
Delete All  
Please wait a moment....  
Instructions  
Setup-Exit  
4
Press [ENTER] to confirm.  
Hide Cha pters  
Split Title may take several minutes.  
This feature allows you to  
hide or unhide a chapter.  
After hiding a chapter, the  
chapter is not deleted but  
only hidden. If a chapter is  
hidden then it shows ‘Unhide  
Chapter‘ and vice versa.  
DVD Edit  
After editing is complete, a DVD-RW,DVD±R  
disc will not be compatible with other DVD  
players until you make the disc compatible; see  
page 54~55.  
Title  
1 of 2  
1 of 11  
Chapter  
Edit Chapters  
Hide Chapter  
Change Index Picture  
Split Title  
Instructions  
Enter-Confirm Setup-Exit  
Move …†  
Cha nge Index Picture  
Each title displayed in the Playlist menu is  
represented by a thumbnail picture taken from the  
start of that title or chapter. If you prefer, you can  
select a different still picture from within the title.  
1
2
3
Use […†] to select  
‘Change Index Picture‘.  
DVD Edit  
Title  
1 of 2  
Chapter  
1 of 11  
Edit Chapters  
Hide Chapter  
Press [ENTER] to display  
the submenu.  
Change Index Picture  
Split Title  
Use […†] to select Yes‘  
if you prefer to change the  
picture.  
Instructions  
Enter-Confirm
Move …†  
Change Picture  
Are you sure?  
Yes  
No  
4
Press [ENTER] when the preferred picture is on  
your TV screen.  
5 8  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 59  
mac001 1200DPI 100LPI  
Tro u b le sh o o tin g  
Tro u b le sh o o tin g  
Check the following guide for the possible cause of a problem before contacting customer support.  
Sym ptom  
Ca use  
Solution  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
No picture.  
No sound.  
The TV is not set to receive HDD/DVD Select the appropriate video input on the  
Recorder signal output.  
TV so the picture from the HDD/DVD  
Recorder appears on the TV screen.  
Connect the video cable securely.  
The video cable is not connected  
securely.  
The TV power is turned off.  
The equipment connected with the  
audio cable is not set to receive  
HDD/DVD Recorder signal output.  
The audio cables are not connected  
securely.  
Turn on the TV.  
Select the correct input mode on the audio  
receiver so you can listen to the sound  
from the HDD/DVD Recorder.  
Connect the audio cables securely.  
The power on the equipment  
connected with the audio cable is  
turned off.  
Turn on the equipment connected with the  
audio cable.  
The audio cables are damaged.  
Replace with new ones.  
Playback picture is poor. The disc is dirty.  
HDD/DVD Recorder does No disc is inserted.  
not start playback.  
Clean the disc.  
Insert a disc. (Check that the disc  
indicator on the front panel display is lit.)  
Insert a playable disc. (Check the disc  
type, colour system, and regional code.)  
Place the disc with the playback side  
down.  
An unplayable disc is inserted.  
The disc is placed upside down.  
The disc is not placed within the  
guide.  
Place the disc on the disc tray correctly  
inside the guide.  
The disc is dirty.  
Clean the disc.  
The Parental Control level is set.  
Cancel the Parental Control function or  
change the rating level.  
Picture from external  
input is distorted.  
The video signal from the external  
component is copy-protected.  
You cannot connect via the HDD/DVD  
Recorder. Connect the component  
directly to your TV.  
Some channels are skipped The skipped channels were deleted  
Use the Adjust Channels’ feature to  
restore channels.  
Tighten connections or replace cable.  
over when using [PR+/–].  
Picture or sound of  
with the ‘Adjust Channels’ feature.  
Antenna or cables are loose.  
broadcasting channel is Wrong Tuning Band is selected in the Try all ‘Auto Set‘ options; see page 21 for  
ETDING  
weak or missing.  
Camcorder image not  
shown.  
HDD/DVD Recorder Setup menu.  
Camcorder is off.  
details.  
Turn camcorder on and operate properly.  
Camcorder image via A/V The HDD/DVD Recorder’s source is  
Use [INPUT] to select AV input channel  
(AV or AVF).  
input to HDD/DVD  
Recorder is not shown on  
TV screen.  
not set to AV or AVF.  
Cant play disc recorded The disc was not finalised (or not made Finalise the disc; see page 55.  
on this HDD/DVD compatible if using a DVD+RW).  
Recorder on another DVD Some players will not play even a  
FNRCE  
No solution.  
No solution.  
player.  
finalised disc.  
Discs recorded with copy-once  
material cannot be played on other  
players.  
5 9  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 60  
mac001 1200DPI 100LPI  
Tro u b le sh o o tin g  
Sym ptom  
Ca use  
Solution  
Cannot record or did not The remaining blank space on the  
Use another disc.  
record successfully.  
disc is insufficient.  
The source you are trying to record is You cannot record the source.  
copy-protected.  
When setting the recording channel, Select the channel on the HDD/DVD  
the channel is tuned on your TV’s  
tuner.  
Recorder’s built-in TV tuner.  
Timer Recording not  
possible.  
Clock in HDD/DVD Recorder is not set Set clock to correct time. See ‘Set Clock‘  
to correct time.  
on page 21.  
Timer has been programmed  
incorrectly.  
Reprogram Timer. See ‘Timer Recording‘  
on page 42~44.  
TIMER indicator light does not appear Reprogram Timer.  
after programming timer.  
Stereo Audio Record  
and/or Playback not  
present.  
TV is not Stereo-compatible.  
Broadcast program is not in stereo  
format.  
No solution.  
No solution.  
HDD/DVD Recorder A/V Out jacks are Make A/V connections. Stereo is available  
not connected to TV A/V In jacks.  
only via A/V output from HDD/DVD  
Recorder.  
HDD/DVD Recorder Audio/Video Out is Select AUX or A/V source as TV input.  
not selected for viewing at the TV.  
HDD/DVD Recorder’s TV audio  
channel is set to BIL or MONO.  
The remote control is not pointed at  
Set TV audio channel mode to Stereo.  
See ‘Changing the TV Audio Channel‘ on  
page 33.  
Remote control does not the remote sensor of the HDD/DVD  
Point the remote control at the remote  
sensor of the HDD/DVD Recorder.  
work properly.  
Recorder.  
The remote control is too far from the  
HDD/DVD Recorder.  
Operate the remote control within 23 ft  
There is an obstacle in the path of the (7m).  
remote control and the HDD/DVD  
Remove the obstacle.  
Recorder.  
The batteries in the remote control are  
dead.  
Replace the batteries.  
RESET : If the set is in malfunctions, press [DVD/HDD] key on the front panel for 5 seconds or unplug the power cord,  
and then plug it in after 5 seconds. As this set is a Digital Multimedia Product, malfunction may occur.  
Mo istu re Co n d e n sa tio n  
Moisture condensa tion ca n occur:  
In loca tions w here m oisture condensa tion m a y occur:  
When the HDD/DVD Recorder is moved from a cold Keep the HDD/DVD Recorder plugged into an AC  
place to a warm place.  
power outlet with the power on. This will help  
prevent condensation.  
Under extremely humid conditions.  
When condensation has occurred, wait a few hours  
for the HDD/DVD Recorder to dry before using it.  
6 0  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 61  
mac001 1200DPI 100LPI  
Te ch n ica l Sp e cifica tio n s  
Te ch n ica l Sp e cifica tio n s  
Genera l  
Power requirements 200–240V~, 50/60 Hz  
Power consumption 40W  
Dimensions(approx.) 435 x 55 x 343 mm (w x h x d)  
Inputs  
Antenna In/Out  
Video In  
U/V-mixed; 75 unbalanced  
1.0 Vp-p, unbalanced  
-8.8 dBm  
Mass (approx.)  
Net : 4.3kg Gross : 5.6kg  
Audio In  
Operating temperature  
41°F to 95°F (5°C to 35°C)  
Operating humidity 5% to 90%  
Outputs  
Video output  
Video output terminal, 1.0 Vp-p,  
unbalanced, RGB output (75Ω  
in load, R : 0.7Vp-p, G : 0.7Vp-p,  
B : 0.7Vp-p)  
Audio output terminal (2  
kinds), 2Vrms (DVD) Analog  
audio output : 2.0Vrms,  
Digital audio output : coaxial,  
optical  
Signal system  
PAL Colour  
Recording  
Recording formats  
DVD Video Recording, DVD-  
VIDEO  
DVD±R, DVD±RW  
[DVD] (Approx.) 1 hour (HQ  
mode), 2 hours (SP mode), 4  
hours (EP mode), 6 hours (SLP  
mode)  
[HDD] (Approx.) 16 hours (HQ),  
33 hours (SP), 64 hours (EP), 97  
hours (SLP)  
Audio output  
Recordable discs  
Recordable time  
S-Video output  
1.0Vp-p, 75unbalanced,  
Mini DIN 4-pin x 1, C :  
0.286Vp-p, 75Ω  
Component Video output/Progressive Scan  
(Y) 1.0Vp-p, 75 Ohm, negative  
Video recording form a t  
sync, RCA jack X 1, (Pb)/(Pr)  
0.7Vp-p, 75 ohm , RCA jack X2  
Sampling frequency 27MHz  
Compression format MPEG 2  
Audio recording form a t  
Sampling frequency 48kHz  
Compression format MPEG1 Layer2  
Accessories  
RF cable ...................................................................... 1  
Scart cable ................................................................. 1  
Blank DVD+RW disc .................................................. 1  
Remote control .......................................................... 1  
Batteries ..................................................................... 2  
HDD Specifica tions  
Capacity  
RPM  
80GB (1platter)  
7200 RPM  
Start Time  
Stop time  
8 sec (15 sec max )  
12 sec ( 20 sec max )  
Design and specifications are subject to change  
without notice.  
HDD Recording Capacity (160GB) (Approx.)  
HQ : 9.5 Mbps, 32Hr, SP : 5.1  
Mbps, 66Hr, EP : 2.5 Mbps,  
128Hr, SLP : 1.7 Mbps, 195Hr  
Audio Frequency range20Hz to 20 KHz  
Video S/N  
Audio S/N  
Resolution  
Over 50 dB  
Over 65 dB  
Over 500 lines (HQ Recording)  
DVD Specifica tions  
Frequency response DVD (PCM 48 kHz): 8 Hz to 22  
kHz, CD: 8 Hz to 20 kHz  
FNRCE  
Manufactured under license from Dolby  
Laboratories. ‘Dolby‘, ‘Pro Logic‘ and the double-  
D symbol are trademarks of Dolby Laboratories.  
Video S/N  
Audio S/N  
More than 60 dB  
More than 90 dB  
Harmonic distortion Less than 0.04%  
DTS and DTS Digital Out are registered  
trademarks of Digital Theater Systems, Inc.  
Dynamic range  
Resolution  
More than 90 dB  
Over 500 lines (HQ Recording)  
6 1  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 62  
mac001 1200DPI 100LPI  
DG-M12D1P-SA(GB) 2005.11.1 11:27 AM ˘  
` 63  
mac001 1200DPI 100LPI  

HP Hewlett Packard Hewlett Packard Computer Monitor W1858 User Manual
GE Monogram ZGU365 User Manual
Elo TouchSystems Elo Entuitive 1725C User Manual
Electrolux SIG 405 R User Manual
Creda C365E User Manual
Combi BLODGETT BC14GDS User Manual
Cisco Systems Convection Oven ASC 2E User Manual
BenQ Computer Monitor G2220HDA User Manual
AT T MLC 6 User Manual
AT T E5923B User Manual