DPT SmartRaidV Century Ultra2 SCSI RAID Controller PM2654U2 R User Manual |
SMARTRAIDV
Century
PM2654U2-R
Available with one, two or three
Ultra2 SCSI Channels
®
Ultra2 SCSI RAID Controller
1
Intel® i960® RD processor for peak performance
2
Expansion Modules add 1 or 2 additional Ultra2 SCSI
channels or 1 Fibre Channel Arbitrated Loop
3 PCI 132MB/s data transfers, 32-bit, 33MHz
Internal and external 68-pin SCSI connectors
4
5
Includes high-speed RAID data path engine,
hardware XOR and ECC processor
6
Support for up to 64MB of hardware cache
5
4
6
2
4
1
3
Features:
• Fully I2O® compliant
• Intel i960 RD processor for ultra-low host CPU utilization
®
• Controls SCSI-1, SCSI-2 or SCSI-3 devices
• SCSI SCRIPTS processor for maximum SCSI performance
• Controls Wide or Narrow Ultra2, Ultra or Fast SCSI
• Very high-density SCSI connector allows 3 external
devices with up to 80MB/s transfer rate
SCSI channels from one slot
• Controls up to 15 SCSI devices per channel
• Up to 12 meter SCSI cable length
• Flash-upgradable firmware and BIOS
• Supports SAF-TE, SES and DEC Fault Bus for intelligent
storage cabinets
• Integrated hardware RAID 0, 1, 5, 0+1 and 0+5
• Dynamic Array Expansion permits drives to be added
on-the-fly to existing arrays
• 4 SIMM sockets support up to 64MB of hardware cache
(DPT ECC EDO or industry standard EDO SIMMs)
• Easy-to-use GUI Storage Management Software
• Expansion Modules add 1 or 2 additional Ultra2 SCSI
channels or 1 Fibre Channel Arbitrated Loop
• BIOS-based SCSI and RAID configuration utility
• PCI 2.1 compliant with 132MB/s bus mastering
|