Bang Olufsen BEOVISION 8 User Manual

BeoVision 8

Guide

Contents

We expect your Bang & Olufsen

retailer to deliver, install and set up

your products. However, the

information required to install and set

them up is included in the Guide.

This is useful if you move your

products or expand your system at a

later date.

Daily operation, 4

•

Introducing your television and Beo4, 4

Watch TV, 6

Adjust sound and picture format, 8

Teletext, 10

Menu overview, 12

Advanced operation, 13

Find out how to operate a connected source, bring up a computer image on the

screen and operate your television in Option 4. In addition find out how to operate

an audio system, how to operate your television in a BeoLink system, and how to

disable the internal TV tuner.

Tuning and preference settings, 25

Find out how to set up your television for the first time, tune in and edit channels.

How to register additional sources and make a surround sound setup. This chapter

also contains information about settings for picture and sound.

Placement, sockets and connections, 45

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect sources.

Maintenance, 53

How to clean your television and change batteries in the Beo4 remote control.

Index, 54

Introducing your television and Beo4

For information about how to operate connected

The Beo4 remote control gives you access

to all functions. When a function is in use,

you are informed via displays on Beo4

or on the television.

equipment, refer to the Guide enclosed with it.

For information on how to add extra functions to

those shown in the Beo4 display, refer to the

Guide enclosed with Beo4.

Switch on the television

The Beo4 display shows the source you have

selected, or extra functions available when you

press the LIST button

FORMAT

DTV

LIGHT

DVD

RADIO

Switch on the television and activate the DVB HD

module as source*. Operation of the DVB HD

source is described in a separate Guide

DTV

TEXT

Bring up the main menu

Switch on teletext

V MEM

RECORD

A MEM

Select channels or teletext pages. Enter data in on-

screen menus

0 – 9

Adjust sound volume: press in the middle to mute

the sound

Enter information in on-screen menus

Accept and store instructions or settings. Press

and hold to bring up a TV channel list

STOP

EXIT

•

Step back through previous menus

Exit all on-screen menus

TEXT

Step up or down through channels or menu items

Switch the television to standby

Reveal additional functions in the Beo4 display,

such as FORMAT

LIST

EXIT

STOP

*NOTE: Which button activates the DVB HD

module depends on your settings in the TUNER

SETUP menu, refer to page 24 for further

information.

Displayed information and menus

Information about the selected source is

shown in the display. On-screen menus allow

you to adjust settings.

TV SETUP

Menu name

TUNING

CONNECTIONS

SOUND

How to use on-screen

menus …

Menu options

PICTURE

Press to switch on the television

MENU LANGUAGE

Press to bring up the TV SETUP

select

Information field

Press to move between the

different menu options

Example of on-screen menu.

Press to reveal different settings

An explanation of symbols in

the Guide

Press to bring up a menu or store GO

a setting you have made

Buttons on the Beo4 remote

control

LIST

Press to step back through

previous menus

STOP

Press to exit all menus

EXIT

Display on the Beo4 remote

control

FORMAT

Display on the television

VOL 26

Watch TV

This chapter describes daily use of

your television: how to switch the

television on, choose a channel and

switch the television off.

Select a TV channel

Bring up a channel list

When you switch the television on, the last

channel viewed appears on the screen.

All your TV channels appear on a list, which

you can bring up on the screen. The list

contains channel numbers and names, and

can contain up to 99 TV channels.

Press to switch on the television

The channel list gives you an

Press a channel number to go

directly to that channel

0 – 9

Press to switch on the television

overview of all your TV channels.

Press and hold to bring up a

channel list on the screen

Press to change channels one by

one

Press or to step between

‘pages’ in the channel list

Press to switch the television to

standby

•

To select a channel, enter the

channel number, or …

0 – 9

Pressing 0 swaps between the

current TV channel and previous

TV channel.

… press until the desired channel

is highlighted

Press to switch on the chosen

channel, or …

… press to leave the menu

EXIT

NOTE! If the screen is overheated, black spots

may appear in the picture. These spots disappear

again, once the television cools down to normal

temperature.

CHANNEL LIST

SAT

INFOKANAL

RTL

MTV

DISCOVERY

EUROSPORT

ARD

TV4

DR1

10 . . . . . . . .

11 ZDF

12 SVT

13 . . . . . . . .

14 TV3

15 TVDK1

16 TVDK2

17 CNN

18 BBCWORLD

select

The channel list provides you with an overview of

all your available TV channels.

Adjust sound and picture format

Several sound adjustment possibilities

are available in your television.

Adjust volume or mute the sound

Sound type or language

You can adjust volume or mute the sound at

any time.

While you are watching TV, you can switch

between the types of sound that are

available.

You can adjust the volume or mute

the sound completely at any time.

Press either end of the button to

adjust the volume up or down

Press repeatedly to display

SOUND* on Beo4

LIST

SOUND

If channels are broadcasted with

different sound types or languages,

you can choose between the sound

types or languages.

Press in the middle of the button

to mute the sound

Press to bring up the current

sound type in the display

Press either end of the button to

bring the sound back

Press GO repeatedly to switch to GO

another sound type or language

in a multi-language programme

If speakers are connected to your

television, you can select a speaker

combination.

Prolonged listening at high

volume levels can cause hearing

damage!

Press to leave the SOUND

function

EXIT

While watching TV, you can adjust

the picture format.

You can store your favourite sound

type when tuning in your TV

channels. For further information,

refer to the chapter ‘Edit tuned

channels’ on page 36.

*NOTE! In order to display SOUND on Beo4, you

must ﬁrst add it to the Beo4 list of functions. Refer

to the Guide enclosed with Beo4.

Speaker combination

Picture format

If you connect loudspeakers to your television,

you can change the speaker combination at

any time.

Select a picture format to optimise the picture. Picture formats to choose from …

FORMAT 1 … For standard TV pictures. Three

Press repeatedly to display

FORMAT on Beo4

LIST

FORMAT

variations are available: 4:3, 15:9 and Panoramic

view (for the largest picture).

Press repeatedly to display

SPEAKER on Beo4

LIST

SPEAKER

FORMAT 2 … For letter-box pictures. If necessary

move the picture up or down to ensure that

channel names or subtitles – if these appear in

the broadcasted picture – can be seen. In some

cases FORMAT 2 is selected automatically.

FORMAT 3 … For genuine 16:9 wide-screen

pictures. FORMAT 3 is usually selected

Press if you want to optimise the GO

picture, or …

Press to select a speaker

combination

1 – 5

… press the number of the

desired picture format

1 – 4

Press to adjust the balance

between the front and rear

speakers

If you have chosen Format 1

or Format 4 …

automatically. If this is not the case, you can

select it yourself.

Press or to select variations

of this format

FORMAT 4 … A video signal in Format 4 uses the

16:9 format and removes any bars at the sides.

A graphics signal, for example from a PC, in

Format 4 displays the centre part of the picture.

When displaying a graphics signal in Format 4,

you can select the left or right part of the

picture with and , respectively.

Press to adjust the balance

between the left and right

speakers

If you have chosen Format 1*

or Format 2 …

Press to remove SPEAKER from

the Beo4 display and return to

the source you were using

EXIT

Press or to move the

picture up and down

Press to leave the FORMAT

function

EXIT

To temporarily remove the picture from the screen,

press LIST repeatedly to display P.MUTE on Beo4,

then press GO. To restore the picture again, press

any source button, such as TV.

Speaker combinations

SPEAKER 1 … Sound in the centre speaker only.

SPEAKER 2 … Stereo sound in the front speakers. *Pictures in 4:3 format cannot be

Subwoofers are active.

moved up and down.

SPEAKER 3 … The centre speaker, front speakers

and subwoofers are active.

SPEAKER 4 … The front speakers, surround

speakers, and subwoofers are active.

SPEAKER 5 … Surround sound from all speakers

and subwoofers.

Available speaker combinations depend on the

number of connected speakers.

NOTE! For further information about how to

connect speakers to the television, refer to the

chapter ‘Connection panels’ on page 51.

Teletext

If you select a channel and the

broadcaster offers a teletext service,

the television gives you access to

teletext pages and any subpages

linked to the pages.

Basic teletext functions

PAGE MEMO HALT LARGE REVEAL SETUP

P100 BBC S100 Wed 13 Oct 12:39:34

Navigate through teletext pages by using the

menu bar at the top of the teletext page.

PAGE MEMO HALT

P100 BBC S100

LARGE REVEAL

Wed 13 Oct

SETUP

12:39:34

> Press TEXT to gain access to teletext and EXIT

to leave teletext.

Teletext can be shown in dual-screen

or normal viewing mode, this means

that the teletext page either fills the

entire television screen or only half.

To move to a new page …

> Enter the number of the page you wish to see,

or …

> … press to move the highlighted cursor to

To stop subpages from turning …

The arrow buttons on Beo4 and the

menu bar at the top of the screen,

help you move to the page you want.

When you get there, you can pause

the turning of subpages to read them

at your own pace.

PAGE.

> Press STOP to stop subpages from turning, or…

> … move the cursor to HALT and press GO. HALT

is replaced by a set of four digits.

> Use and to step to the subpage you wish

to see, or …

> Press or to step between pages, and hold

to step faster.

> Pressing GO steps to index pages (100, 200,

300 …).

> … enter its number using the number buttons

on Beo4.

To enlarge the teletext page …

> Press to move the highlighted cursor to

LARGE.

> Press GO to restart page turning.

The television can remember your

favourite pages or reveal hidden

messages. To make your favourite

teletext pages appear first when you

bring up teletext, store them as

MEMO pages.

> Press GO to show the upper half of the page in

double height. Press GO again to see the lower

half of the page.

To reveal hidden messages and the like …

> Press to move the highlighted cursor to

REVEAL.

> Press GO to return the teletext page to normal

size.

> Press GO to reveal hidden text on the current

page.

NOTE! If your television is linked via a BeoLink

cable to another television, stored MEMO pages

are not shared among these televisions. MEMO

pages must be stored manually on each linked

television.

Store favourite teletext pages

Day-to-day use of MEMO pages

First time use of teletext

PAGE MEMO1 HALT LARGE REVEAL SETUP

You may wish to refer to your teletext MEMO

pages quickly, for example, if you are leaving

for work and wish to check trafﬁc information

on a teletext service.

P100

BBC

S100

Wed 13 Oct

12:39:34

PAGE MEMO2 HALT LARGE REVEAL SETUP

P100 BBC S100 Wed 13 Oct 12:39:34

PAGE MEMO1

P100 BBC

HALT REC SETUP REVEAL

S100 Wed 18 SEP 12:39:32

To view MEMO pages …

> Press TEXT to bring up teletext.

> Press or to move between MEMO pages.

> Press EXIT to leave teletext.

Nine MEMO pages are available for each

television channel’s teletext service.

To delete a MEMO page …

> Press or to move the cursor to SETUP and

press GO.

PAGE MEMO1

P100 BBC

HALT REC SETUP REVEAL

S100 Wed 13 Oct 12:39:34

To create a MEMO page …

> Move the cursor to the MEMO page you wish to

delete and press the yellow button.

> Bring up a page you view often.

> Press or to move the cursor along the menu > Press the yellow button again to conﬁrm.

bar to SETUP and press GO. The 9 available

MEMO slots are shown by number. The ﬁrst is

highlighted.

To view teletext subtitles for a program …

If you would like available teletext subtitles to

appear automatically for a particular program,

store the teletext subtitles page as MEMO page 9.

> Press GO to store the current page. The cursor

moves to the next available MEMO slot.

> Use the number buttons on Beo4 to select the

next teletext page you wish to store.

> Repeat the procedure for each page you wish to

store.

The very ﬁrst time teletext is activated, it

starts in dual-screen mode. You can then

choose full-screen instead. The teletext mode

is remembered the next time you switch on

teletext.

> To leave the MEMO setup, press or to move

the cursor to BACK and press GO.

> Press EXIT to leave teletext.

To change viewing mode …

> Press TEXT to bring up teletext.

> Press TEXT again to switch between full-screen

and dual-screen.

> Press EXIT to leave teletext.

MEMO pages are not available in DVB teletext.

Menu overview

The illustration on this page shows

the content of the menu system, and

also indicates where in this Guide

you can find further information

about the menus.

SOUND

ADJUSTMENT

p. 43

TV SETUP

TUNING

VOLUME

EDIT CHANNELS

ADD CHANNELS

AUTO TUNING

MANUAL TUNING

FREQUENCY

CHANNEL NO.

NAME

p. 36

p. 40

p. 38

BASS

TREBLE

LOUDNESS

DEFAULT AUDIO

DEFAULT VIDEO

p. 43

p. 30

The extended on-screen menu system for

the television. The greyed menu items

indicate optional extras which may or may

not be present in your system.

SPEAKER TYPE

FRONT

FINE TUNE

REAR

DECODER

SUBWOOFER

SPEAKER DISTANCE

CENTRE

TV SYSTEM

SOUND

p. 31

Available menus also depend on the TV

tuner settings, Option setting and

connected speakers. For example, the

tuning menus are not available if the

television tuner is disabled.

PLAY TIMER

p. 20

p. 28

LEFT FRONT

RIGHT FRONT

RIGHT REAR

LEFT REAR

CONNECTIONS

AV 1

SOURCE

IR SOCKET

STB SETUP

SUBWOOFER

SPEAKER LEVEL

SEQUENCE

Press MENU on Beo4 to access the main

menu.

p. 32

STANDBY OPTIONS

p. 29

HDMI

LEFT FRONT

RIGHT FRONT

RIGHT REAR

LEFT REAR

S/P-DIF

AV 2

SOURCE

IR SOCKET

SOUND SYSTEM

p. 34

p. 42

STB SETUP

STANDBY OPTIONS

PICTURE

BRIGHTNESS

CONTRAST

COLOUR

HDMI

YPBPR

S/P-DIF

TINT

AV 3

HOR. SIZE

SOURCE

HOR. POSITION

VERT. POSITION

IR SOCKET

STB SETUP

STANDBY OPTIONS

MENU LANGUAGE

DANSK

p. 44

HDMI

YPBPR

VGA

DEUTSCH

ENGLISH

S/P-DIF

ESPAÑOL

AV4

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

SOURCE

IR SOCKET

STB SETUP

STANDBY OPTIONS

HDMI

S/P-DIF

LINK

FREQUENCY

p. 23

p. 24

TV SYSTEM

MODULATOR

TUNER SETUP

TV TUNER

DVB HD

Advanced operation

This chapter tells you how to operate

a connected source, how to use your

television as a computer monitor, and

how to operate your television with

an audio system and in a BeoLink

system. It also tells you how to

Daily operation, 4

Find out how to use the Beo4 remote control, bring up the menus on the screen,

operate the daily functions of your television and how to adjust sound and picture

format. In addition, find an overview of the on-screen menu system.

Advanced operation, 13

disable the internal TV tuner.

•

Use connected video equipment with Beo4, 14

Use your television as a computer monitor, 16

Two televisions in the same room, 17

Connect and operate an audio system, 18

BeoVision in a link room, 20

BeoLink – Distribute sound and picture, 22

TV tuner, 24

Tuning and preference settings, 25

Find out how to set up your television for the first time, tune in and edit channels.

How to register additional sources and make a surround sound setup. This chapter

also contains information about settings for picture and sound.

Placement, sockets and connections, 45

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect sources.

Maintenance, 53

How to clean your television and change batteries in the Beo4 remote control.

Index, 54

Use connected video equipment with Beo4

The built-in Peripheral Unit Controller

acts as an interpreter between

Peripheral Unit Controller menu

Buttons on the remote controls included with

your equipment may not match those on

Beo4. To see which Beo4 buttons activate

speciﬁc services or functions, bring up the

Peripheral Unit Controller menu on the

connected video equipment, such as

a set-top box, video recorder or DVD

player, and the Beo4 remote control.

GUIDE

TEXT

INFO

WIDE

GUIDE

TEXT

screen.

You can use the Beo4 remote control

to gain access to the channels and

functions offered by your equipment.

Press a source button* to switch

on connected equipment

INFO

DTV

WIDE

Some functions are available via Beo4

when you switch on the equipment.

Additional functions are available

through a Peripheral Unit Controller

menu that you bring up on the

screen.

Press to bring up the Peripheral

Unit Controller menu

Example of a Peripheral Unit Controller menu – The

Beo4 buttons are shown to the left on the menu,

and the functions they control are shown to the

right. The menu may also list buttons on the remote

control included with your connected equipment.

Press the number button that

activates the function you want,

or …

1 – 9

… press one of the coloured

buttons to activate a function

For instruction in the various

functions offered by your equipment,

please refer to the product’s own

user’s guide.

When you have selected a set-

top box as a source, press MENU

twice to bring up the television’s

main menu.

For further information about

supported equipment, contact your

Bang & Olufsen retailer.

NOTE: Which source button activates your

peripheral unit depends on the tuner setup and

settings in the CONNECTIONS menu, refer to

page 24 and 28 for further information.

Universal Beo4 operation

Use equipment menus

Use equipment in a link room

If you know which Beo4 button activates the

function you want, you can activate the

function without bringing up the Peripheral

Unit Controller menu ﬁrst.

Once you have activated connected

equipment, you can operate its own menus

with Beo4.

When you have connected equipment to the

television in the main room, you can operate

it via the link room television. However, the

Peripheral Unit Controller menu cannot be

displayed on the television screen in the link

room.

While equipment menus are

shown …

While your equipment is on …

Press GO and then the number

button that activates the

function you want

Moves the cursor up or down

1 – 9

Press to switch on equipment in

the main room

V M E M

DVD

Moves the cursor left or right

DTV

Press one of the coloured

buttons to activate a function

Selects and activates a function

Press GO and then the number

button that activates the

function you want

1 – 9

Press GO and then or to

step up or down through

channels directly

Press GO and then or to

step between menu pages or

step in channel lists

Press one of the coloured

buttons to activate a function

Press and hold GO to bring

up the Program guide or the

‘Now/Next’ banner on the screen

depending on your source

Exits menus, or returns to

a previous menu*

STOP

EXIT

Exits menus, enters or exits

If you have chosen the standby

option ‘MANUAL CONTROL’, see

page 29, and your set-top box

supports it, you can switch the

box on by pressing GO + 0.

different modes, such as radio

Use the coloured buttons as

indicated in the menus of your

connected equipment

*Depending on your source, you

may have to press EXIT twice

instead of STOP to return to a

previous menu.

Use your television as a computer monitor

If you connect your television to a

computer, as described on page 49,

you can use it as a monitor.

Bring up the computer image on the screen

To see the computer picture on the television

screen, you must bring it up with Beo4.

The television supports the following screen

resolutions: 60 Hz; 640 × 480, 800 × 600,

1024 × 768, 1280 × 720.

IMPORTANT! If you wish to connect a

computer to the television and use the

television as a monitor, make sure that you

disconnect the television, the computer,

and all equipment connected to the

computer from the mains before you

connect the computer and the television

to each other.

To bring up the computer

picture …

Press repeatedly until PC*

appears in the Beo4 display

LIST

Press to bring up the picture

You can then operate the

computer as you normally would.

When in use, the computer must be

connected to a grounded wall outlet as

speciﬁed in the computer’s setting-up

instructions.

*In order to display PC on Beo4,

you must first add it to the Beo4

list of functions. For further

information, refer to the Guide

enclosed with Beo4.

Two televisions in the same room

If you have placed your BeoVision 8

in a room where you already have a

Bang & Olufsen television, and

commands from Beo4 can be

received by both televisions, you

must change the option setting of

BeoVision 8. This prevents

One remote control for both televisions

For your television to function properly, it is

essential that the television is set to the

correct Option:

BeoVision 8

Option 4

To set your television for Option 4 …

> While holding the • button on Beo4, press LIST.

> Let go of both buttons.

LIST

LINK

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

simultaneous activation of both

televisions.

> Press LIST repeatedly to display V.OPT on Beo4

and press 4.

Operate your television in Option 4 …

Normally, you can activate a source, such as TV,

simply by pressing the relevant source button on

Beo4. However, when you set your television to

Option 4, you must do the following:

> Press LIST repeatedly until LINK* is shown in

the Beo4 display.

In order to use teletext on a television you have set

to Option 4, you must set up Beo4 to ‘VIDEO 3’,

but this limits the Beo4 functions that can be used

with televisions set to other Options. For further

information, refer to the Guide enclosed with

Beo4.

> Press a source button, such as TV.

*In order to display LINK on Beo4, you must add it to

the Beo4 list of functions. For further information,

refer to the Guide enclosed with Beo4.

Connect and operate an audio system

Connect your audio system

Using a Master Link cable, connect the MASTER

LINK sockets on the television and the audio

system.

If your television is equipped with the

optional System Module and you

connect a compatible audio system,

you obtain the benefits of an

Option 2

Option 0

Option setting

integrated audio/video system.

If your television has been set up in an AV system,

you may need to set it to the correct Option.

Switch the entire system to standby.

Play a CD on your audio system using

the television speakers, or switch on

a TV programme and send the sound

to your audio system speakers.

In one room – all speakers are connected to the

television.

Option setting for the television

> While holding the • button on Beo4, press LIST.

> Let go of both buttons.

Your AV system can be placed

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

together in one room or in two

rooms with the television placed in

one room, and the audio system with

a set of speakers placed in another.

Option 1

> Press LIST repeatedly to display V.OPT on Beo4

and then key in the appropriate number (1 or 2).

Option setting for the audio system

> Repeat the procedure as described above.

> Press LIST repeatedly to display A.OPT on Beo4

and then key in the appropriate number (0, 1, 2,

5 or 6).

Not all Bang & Olufsen audio systems

support integration with the television.

The television and audio system in the same room.

Option 2

Audio system in one room, and the television in

another.

Use an integrated audio/video system

If you integrate your audio system and your

television, you can choose a speaker combination

appropriate to the current video or audio

programme, and also record video sound on the

audio system.

Video sound recording

If you listen to sound from your television on your

Bang & Olufsen audio system’s speakers, and your

audio system has a tape recorder, you can record

television sound on the audio tape recorder. Refer

to the Guide enclosed with your audio system for

further information.

LIST

To listen to sound from a television source on your

audio system speakers without switching on the

screen, press LIST repeatedly to display AV* on

Beo4, and then press a source button, such as TV.

To listen to audio sound on the television speakers,

press LIST repeatedly to display AV* on Beo4, and

then press an audio source button, such as CD.

*NOTE! In order to display AV on Beo4, you must

ﬁrst add it to the Beo4 list of functions. For further

information, refer to the Guide enclosed with

Beo4.

BeoVision in a link room

Option setting

If your television is equipped with the

optional System Module and you

choose to use your television in a link

room, you can operate all connected

systems through the television.

Main room

Link room

To set the link room television to the correct

Option …

> While holding the • button, press LIST.

> Let go of both buttons.

> Press LIST repeatedly to display OPTION? on

Beo4 and press GO.

Option 6*

> Press LIST repeatedly to display V.OPT on Beo4

and press 6*.

For your entire system to function

properly, it is essential that the link

room television is set to the correct

Option before you connect it to the

system in the main room.

Timer Play in link room

If your television is placed in the link room, it can

be part of a Timer Play programmed on your main *If you connect the television for use in a link room

room system.

where other link systems are already connected,

you must set the television to Option 5 instead.

You must follow the procedure

described below when you connect

your television for use in a link room:

1 Connect the link room television to

the mains.

To make your television part of a Timer Play …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight PLAY TIMER.

> Press GO to bring up the PLAY TIMER menu.

TIMER ON/OFF is already highlighted.

> Press or to reveal ON.

PLAY TIMER

TIMER

2 Using the Beo4 remote control,

program the link room television

to Option 6*.

> Press GO to store the setting.

3 Disconnect the link room television

from the mains.

store

4 Make the link and aerial

connections.

5 Reconnect the link room television

to the mains.

NOTE! If your BeoVision 8 is linked to a video

master with the possibility of programming a

Timer Play, the Timer Play can be executed on

BeoVision 8.

Link room operation

Listen to stereo sound in your link room …

Usually sound distributed from a main room video

source, such as a set-top box, to the link room is

transmitted in mono. However, you can select

stereo sound:

Main room

Link room

Use sources present only in one of the

rooms …

> Press the button for the source you wish to use;

operate the selected source as usual.

> Press TV or DTV to switch on the television.

> Press LIST repeatedly until AV* is shown in the

Beo4 display.

Use a main room source – present in both

rooms …

> Press LIST repeatedly on Beo4 until LINK* is

shown in the display.

> Press DTV to activate a source connected to the

main room system, such as a set-top box.

> Press the button for the source you wish to use;

operate the source as usual.

While using this function, distribution of other

main room sources to other link room systems is

not possible. You can only listen to stereo sound if

your television is set for Option 6.

Use a link room source – present in both

rooms …

> Press the button for the source you wish to use;

operate the source as usual.

*In order to display LINK and AV on Beo4, you

must ﬁrst add them to the Beo4 list of functions.

For further information, refer to the Guide

enclosed with Beo4.

BeoLink – Distribute sound and picture

The BeoLink system makes it possible

to distribute picture and/or sound to

other rooms throughout the house.

Link connections

If you have a BeoLink distribution

system installed, and your television

is equipped with the optional System

Module, you can either use your

television in the main room, such as a

living room, or in a link room, such as

a study or bedroom.

To the MASTER LINK socket on the

MASTER

LINK

link room system

AERIAL

RF OUT

Video signal distribution to link

rooms

RF Link

Amplifier

The main room system must be connected to

the link room system with a Master Link

cable.

If an audio system is already connected to the

MASTER LINK socket and you wish to connect

more equipment, then the Master Link cable must

be split in two and joined with the cable from the

link room using a special junction box. Contact

your Bang & Olufsen retailer for assistance.

> Connect the Master Link cable to the MASTER

LINK socket on the television.

> If you want to distribute video signals as well,

connect an ordinary aerial cable to the socket

Digital signals cannot be distributed from a main

marked ‘RF OUT’ on the television. Then run the room television to the link room system.

aerial cable to the RF Link Ampliﬁer and the

Master Link cable to the link room and follow

the instructions enclosed with the link room

equipment.

System modulator

Recommended setups

LINK

If your link room is an audio setup, for example, a

BeoLink Active/Passive, and you choose to set up

a non-linkable TV in the same room, you must set

the system modulator to ON, as described below.

The factory setting is AUTO, which must be used if

you use a linkable Bang & Olufsen TV.

If your television is the video master of a BeoLink

setup, we recommend that a BeoCenter 2 or DVD 2

is connected to the AV1 socket and HDR 2 must

be connected to the AV4 socket.

FREQUENCY

TV SYSTEM

MODULATOR

599

B/G

AUTO

Simultaneous sources:

While watching one source on the television

screen in the main room, you can either record a

different source or distribute one other source to a

link room.

To switch on the system modulator …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight CONNECTIONS.

> Press GO to bring up the CONNECTIONS menu

and press to highlight LINK.

store

The LINK menu is only available when a local TV

source is selected.

> Press GO to bring up the LINK menu, and press

to highlight MODULATOR.

Link frequency

If, for example, a TV channel in your area is

broadcasted on the same frequency as the

BeoLink system uses, 599 MHz, you must tune the

> Press or to reveal ON.

> Press GO to store the setting, or …

> … press EXIT to leave all menus without storing. system modulator to an unused frequency. When

you change the link frequency in the main room

system, you may have to change the link

frequency in the link room system accordingly.

To change the link frequency …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight CONNECTIONS.

> Press GO to bring up the CONNECTIONS menu

and press to highlight LINK.

> Press GO to bring up the LINK menu,

FREQUENCY is already highlighted.

> Press or or 0 – 9 to ﬁnd an unused

frequency.

> Press GO to store the setting, or …

> … press EXIT to leave all menus without storing.

Tuner setup

To disable the internal tuner …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight TUNER SETUP.

> Press GO to bring up the TUNER SETUP menu,

TV TUNER is already highlighted.

You may choose to disable the TV

tuner, if your television source is the

DVB HD or a peripheral unit, such as

a set-top box. If you disable the TV

tuner, you activate DVB HD by means

of the TV button and you can activate

a peripheral unit by means of the

DTV button. If you also disable the

DVB HD tuner, you can activate a

connected peripheral unit acting as

tuner wither either the TV button or

the DTV button.

TUNER SETUP

TV TUNER

DVB HD

> Press or to switch between the setting ON

or OFF.

> Press to highlight DVB HD.

store

> Press or to switch between the setting ON

or OFF.

> Press GO to store the settings, or …

> … press EXIT to leave all menus without storing.

Important! If you have connected a Bang & Olufsen

hard disc recorder to your television, it is

recommended not to disable the TV tuner.

Tuning and preference settings

Daily operation, 4

Find out how to perform the first-

time setup procedure and tune in all

available channels automatically. In

addition, you can find information

about how to edit tuned channels

and adjust other available settings,

such as picture and sound.

Find out how to use the Beo4 remote control, bring up the menus on the screen,

operate the daily functions of your television and how to adjust sound and picture

format. In addition, find an overview of the on-screen menu system.

Advanced operation, 13

Find out how to operate a connected source, bring up a computer image on the

screen and operate your television in Option 4. In addition find out how to operate

an audio system, how to operate your television in a BeoLink system, and how to

disable the internal TV tuner.

For information about how to place

your television and connect

additional video equipment, refer to

the chapter ‘Placement, sockets and

connections’ on page 45.

Tuning and preference settings, 25

•

First-time setup of your television, 26

Loudspeaker setup – surround sound, 30

Edit tuned channels, 36

Re-tune or add channels, 40

Adjust picture and sound settings, 42

Choose menu language, 44

Placement, sockets and connections, 45

Find out how to handle and place your television and where the sockets are placed.

Find out how to connect sources.

Maintenance, 53

How to clean your television and change batteries in the Beo4 remote control.

Index, 54

First-time setup of your television

First-time setup of your television has four

main steps: registration of all connected

equipment, tuning of channels, loudspeaker

setup and sound adjustment. However, which

menus appear depends on whether or not

the TV tuner is enabled and whether or not

you have connected additional speakers to

the television.

The setup procedure described here is

activated when the television is

connected to the mains and switched

on for the first time. You are led

through an automatic series of on-

screen menus in which you must

have connected and loudspeakers.

MENU LANGUAGE

TUNER

CONNECTIONS

AUTO TUNING TV

SPEAKER TYPES

SPEAKER DISTANCE

SPEAKER LEVEL

SOUND ADJUSTMENT

The CONNECTIONS menu also varies

according to the Option programming of

your television, described on page 20 and

whether the television is equipped with the

optional System Module or not.

If you change your setup at a later

date, you can access the same menus

and update your settings.

For information on setting up and

operating DVB HD, refer to the

separate Guide.

The sequence of menus in ﬁrst-time setup:

MENU LANGUAGE … You can select the

language for on-screen menus. The text on the

screen changes as you move from language to

language. For further information, refer to the

chapter ‘Choose menu language’ on page 44.

TUNER … In this menu you can disable the

internal TV tuner and make DVB HD your main

television source, and you can disable the DVB

HD module to let a peripheral unit (set-top box)

be your DTV television source.

SPEAKER DISTANCE … Enter the straight-line

distances from each speaker to your listening

position. For further information about the

SPEAKER DISTANCE menu, refer to page 31 in

the chapter ‘Loudspeaker setup – surround

sound’.

For information about where and how to connect

extra equipment, refer to ‘Register additional

video equipment’ on page 28 and the chapter

‘Connection panels’ on page 50.

SPEAKER LEVEL … In this menu, you are to

calibrate the sound level for the connected

speakers. A calibration sound is produced

alternately in each speaker. Adjust the sound

level from all the connected speakers to match

the sound level from the centre speaker. You

can choose whether you want the sound

sequence to occur automatically or manually.

For further information about the SPEAKER

LEVEL menu, refer to page 32 in the chapter

‘Loudspeaker setup – surround sound’.

SOUND ADJUSTMENT … Adjust sound

characteristics, such as volume, bass, treble and

loudness. In addition, you can preset two

default speaker combinations; one to be used

each time you switch on a video source in your

television, and one to be used each time you

switch on an audio source connected to your

television. You can still select a different speaker

combination any time you wish. For further

information about the SOUND ADJUSTMENT

menu, refer to the chapter ‘Adjust picture and

sound settings’ on page 42.

CONNECTIONS … Select the type of equipment

you have connected to each socket, the sockets

used, the product name, and the source name.

For further information about the

CONNECTIONS menu, refer to the chapter

‘Register additional video equipment’ on page 28.

AUTO TUNING … When you have registered your

connected equipment, a menu for channel

tuning automatically appears on the screen.

Press GO to start auto tuning. The television

tunes in all available channels. For further

information about tuning TV channels, refer to

the chapter ‘Re-tune or add channels’ on page

40.

SPEAKER TYPES … In this menu, you select which

Bang & Olufsen speakers are connected. For

further information about the SPEAKER TYPES

menu, refer to page 30 in the chapter

‘Loudspeaker setup – surround sound’.

If you connect additional video

equipment to your television, you

must register the equipment in the

CONNECTIONS menu.

What is connected?

Registering the equipment connected to the

television enables you to activate it with the

Beo4 remote control.

AV2

SOURCE

IR SOCKET

HDMI

V. MEM

NONE

When the system is first set up, the

equipment connected at that

particular moment is detected by the

television, and the CONNECTIONS

menu appears automatically on the

screen. If you connect equipment at

a later date, on a permanent basis,

then you must register this

> Press TV to switch on the television.

YPbPr

> Press MENU to bring up the TV SETUP menu.

> Press to highlight CONNECTIONS.

S/P-DIF

NONE

> Press GO to bring up the CONNECTIONS menu.

> Press or to step between the different

socket groups: AV1, AV2, AV3 and possibly AV4.

> Press GO to be able to register a connected

store

product to the highlighted socket group.

> Press or to move between sockets in the

group.

If you register a source to a socket and do not assign

an IR socket to this source, a sub-menu opens

where you must choose between, for example,

Bang & Olufsen and Non-Bang & Olufsen products.

> Press or to register what you have

connected to the highlighted socket.

> Press GO to be able to select another socket

group.

equipment in the CONNECTIONS

menu.

For information about where and

how to connect extra equipment,

refer to the previous pages and the

chapter ‘Connection panels’ on page

50.

> Press STOP to back up through previous menus

or press EXIT to exit all menus directly.

When you have connected additional video

equipment to your television, you must also

‘tell’ the system what is connected.

While it is possible to register your equipment

under any of the available source names, the

names you select affect how you can use your

sources.

DTV SETUP

SELECTOR

NOKIA 9800S/025

NOKIA 9602S

NOKIA 9820t

NOKIA 9200

PACE DTR730-IM

What’s on the AV1 – AV4 menu …

SOURCE … Select the source you have connected. Automatic standby …

The option you select indicates which remote

control button switches on the source. For

example, a source registered as V.MEM is

When you register a set-top box in the

CONNECTIONS menu, you can also select a

‘standby setting’ time for your set-top box. This

switched on when you press the VMEM button. means that you can select if the connected set-top

select

V.MEM … If you have connected a Bang &

Olufsen video recorder or any other video

recorder.

box should switch to standby automatically.

If you have connected a set-top box, you will be

prompted to select your set-top box from an

onscreen list when you select an IR socket in the

CONNECTIONS menu.

The options are:

DVD … If you have connected a DVD player.

DTV … If you have connected a set-top box

registered as DTV.

OFF AT SOURCE CHANGE … The set-top box is

switched on when selected, and off when

another source is selected.

V.AUX … If you have connected a set-top box

or other equipment registered as V.AUX.

DECODER … If you have connected a decoder.

PC … For a connected PC.

OFF AT TV STANDBY … The set-top box is switched If a source is connected to the HDMI socket, some

on when selected, and off when the television is

switched off.

video functions are affected:

– You cannot distribute sound or picture from a

HD source to a product in a link room, unless

your HD equipment also provides a Standard

Deﬁnition (SD) signal

ALWAYS ON … The set-top box is always on and

never switched off.

NONE … If no equipment is connected.

IR SOCKET … If the equipment connected to this

socket is controlled via IR, select which socket

the IR controller is connected to; PUC1, PUC2,

PUC3 or PUC4.

MANUAL CONTROL … The set-top box is not

switched on and off automatically. You switch it

on and off manually by means of the Beo4

remote control.

– You cannot record an HD source, unless your HD

equipment also provides a Standard Deﬁnition

(SD) signal.

HDMI … Indicates whether or not the equipment

is connected to the television via one of the

HDMI sockets. Select the appropriate socket: A

or B.

S/P-DIF … Indicates whether or not the

equipment is connected to the television via

one of the SPDIF sockets. Select the appropriate

socket: 1 or 2.

(YPbPr) … Indicates whether or not the

equipment is connected to the television via the

YPbPr sockets. Options are YES and NO. Only

available in the AV2 and AV3 menus, and can

only be registered in one of these menus at any

time.

(VGA) … Indicates whether or not the equipment

is connected via the VGA socket. Options are

YES and NO. Only available in the AV3 menu.

NOTE! Contents of the CONNECTIONS menu

depend on whether the television is equipped

with the optional System Module or not.

Loudspeaker setup – surround sound

Add four Power Link speakers and a

BeoLab subwoofer to your setup and

you have a surround sound system.

Select speaker types

Connect the loudspeakers to the Power Link

sockets on the television. Refer to the Guide

enclosed with the loudspeakers for speciﬁc

information about how to set them up. Refer

to ‘Connection panels’ on page 51 for

SPEAKER TYPE

BEOLAB 8000

FRONT

REAR

BEOLAB 4

YES

A surround sound setup fits easily

into your living room. Let the picture

determine your ideal listening and

viewing position. You get the best

sound experience in the area created

by the speakers.

SUBWOOFER

information about the Power Link sockets.

Remember to set the L–R–LINE switch on both the

front and rear set of speakers to L or R (left and

store

right sound channel) to indicate their position in

each set. Set the left speakers to L and the right

speakers to R.

Always select your most powerful speakers as

front speakers.

To register the speaker types …

> Press MENU to bring up the TV SETUP menu

and press to highlight SOUND.

> Press GO to bring up the SOUND menu and

press to highlight SPEAKER TYPE.

> Press GO to bring up the SPEAKER TYPE menu.

> Press or to reveal your speaker type and to

move on to the next speaker set. Choose NONE

if no speakers are connected.

> If you have a BeoLab subwoofer, press to

move the cursor to SUBWOOFER and press to

change the ﬁeld to YES.

> Press GO to store or EXIT to leave the menu

without storing.

Set speaker distance

Switch on the television from your favourite

viewing position. Enter the straight-line

distances in metres between your position

and the individual speakers.

SPEAKER DISTANCE

CENTRE

1.0 M

LEFT FRONT

RIGHT FRONT

RIGHT REAR

LEFT REAR

LEFT FRONT

RIGHT FRONT

SUBWOOFER

CENTRE

store

To set the speaker distances …

> Press MENU to bring up the TV SETUP menu

and press to highlight SOUND.

> Press GO to bring up the SOUND menu and

press to highlight SPEAKER DISTANCE.

> Press GO to bring up the SPEAKER DISTANCE

menu.

LEFT REAR

RIGHT REAR

> Press or to move the cursor from speaker

to speaker and press or to select the

approximate straight-line distance in metres

between your viewing position and each of the

speakers.

> When you have entered the appropriate speaker

distances, press GO to store or press EXIT to

leave the menu without storing.

>> Loudspeaker setup – surround sound

Calibrate the sound level

When you have connected speakers in a

surround sound setup to the television, you

must perform a speaker calibration.

To calibrate the sound level …

SPEAKER LEVEL

SEQUENCE

> Press MENU to bring up the TV SETUP menu

and press to highlight SOUND.

AUTOMATIC

. . . . . . . .

LEFT FRONT

RIGHT FRONT

RIGHT REAR

LEFT REAR

> Press GO to bring up the SOUND menu and

press to highlight SPEAKER LEVEL.

> Press GO to bring up the SPEAKER LEVEL menu.

SEQUENCE is highlighted.

A calibration sound is produced alternately in

each of the speakers you have connected in

your surround sound setup. Your task is to

adjust the sound level from all the connected

speakers to match the sound level from the

centre speaker. You can choose whether you

want the sound sequence to occur

> Press or to choose between AUTOMATIC

and MANUAL.

store

> Press or to adjust the speaker sound and

or to move to another speaker.

It is not necessary to calibrate subwoofer sound in

a surround sound setup.

automatically or manually.

> When you have adjusted the sound for all the

speakers in your surround sound setup, press

GO to store or press EXIT to leave the menu

without storing.

Once you have performed your speaker

calibration, you will only need to re-calibrate

the speaker sound if you make changes to the

setup, for example, if you move one or more

of the speakers.

Choose a speaker combination

While you are watching a movie or

programme, you can choose the speaker

combination you wish to switch on, provided

that the various sound modes are available in

your system.

To choose a speaker combination …

> Press LIST on Beo4 until SPEAKER is shown in

the Beo4 display.

> Press the number of the speaker combination

you want. The selected speakers cut in

automatically.

The television may switch on a speaker

combination automatically. This happens if a

programme or DVD contains information

about the number of speakers to be switched

on. You are still free to choose the speaker

combination you prefer.

> If you want to adjust the sound balance for the

programme you are watching, press or to

adjust the balance between the external front

and rear speakers, and press or to adjust

the balance between the left and right speakers.

> Press EXIT to remove SPEAKER from the Beo4

display and to return to the source you were

using.

If you only have connected a pair of front speakers

to the television, you can only choose SPEAKER 1–3.

Speaker combinations

SPEAKER 1 … Sound in the centre speaker only.

SPEAKER 2 … Stereo sound in the front speakers.

Subwoofers are active.

SPEAKER 3 … The centre speaker, front speakers

and subwoofers are active.

SPEAKER 4 … The front speakers, surround

speakers, and subwoofers are active.

SPEAKER 5 … Surround sound from all speakers

and subwoofers.

>> Loudspeaker setup – surround sound

See the name of the active sound system

You can see the name of the active sound

system for a source or programme on the

screen. The menu shows both the input

format and the output format. However, it is

not possible to adjust or preset a sound

system.

SOUND SYSTEM

INPUT FORMAT:

MONO /STEREO

OUTPUT FORMAT:

STEREO

SPEAKER 1

To see the active sound system …

> Press MENU to bring up the TV SETUP menu

and press to highlight SOUND.

> Press GO to bring up the SOUND menu and

press to highlight SOUND SYSTEM.

> Press GO to bring up the SOUND SYSTEM

menu.

Edit tuned channels

If automatic tuning of all channels

have not stored the channels on your

preferred channel numbers or has

not named all the stored channels

automatically, you can rearrange the

order in which the channels appear

and provide them with a name of

your own choice

Move or delete tuned channels

At any time, you can move or delete any

tuned TV channels you do not want.

EDIT CHANNELS

INFOKANAL

. . . . . . . .

DISCOVERY

DR1

Move channels …

TV2

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

. . . . . . . .

ZDF

. .

17 NRK

18 TV4

> Press GO to bring up the TUNING menu. EDIT

CHANNELS is already highlighted.

> Press GO to bring up the EDIT CHANNELS

menu.

move

delete

move

If the tuned channels require

additional editing, such as fine tuning,

use the MANUAL TUNING menu.

> Press or to select the channel you wish to

move.

Delete channels …

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

> Press once to be able to move the channel.

The channel is now moved out of the list.

> Press or to move the channel to the

desired channel number.

> Press GO to bring up the TUNING menu. EDIT

CHANNELS is already highlighted.

> Press to make the channel move back into the > Press GO to bring up the EDIT CHANNELS

list or change places with the channel which

occupies the desired channel number.

menu.

> Press or to move to the channel you wish

to delete.

> Now, move the channel which you changed

places with to an empty channel number or to a > Press to move the channel out of the list.

number already occupied and repeat the

procedure.

> Press the yellow button to be able to delete the

channel – the channel is then shown in red.

> Press the yellow button again to ﬁnally delete

the channel, or press twice to move the

channel back into the list.

> When you have moved the relevant channels,

press STOP to back up through all menus, or

press EXIT to exit all menus.

> When you have deleted the relevant channels,

press EXIT to exit all menus.

Name tuned channels

The EDIT CHANNELS menu also allows you to

name all channels yourself.

EDIT CHANNELS

INFOKANAL

Name channels …

ZDF

RTL7

. . . . . . . .

BBC

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

. .

> Press GO to bring up the TUNING menu. EDIT

CHANNELS is already highlighted.

> Press GO to bring up the EDIT CHANNELS

menu.

17 NRK

18 TV 4

character

> Press or to select the channel you wish to

name.

> Press the green button to be able to name the

channel. The naming menu is now activated.

> Press or to ﬁnd the individual characters in

the name.

> Press to move to the next character. Use

and , or and to enter or edit all the

characters in the name you choose.

> Press GO to store the name.

> If necessary, repeat the procedure and name

other channel numbers.

> When you have named the relevant channels,

press GO to accept your edited list, or press

EXIT to exit all menus.

>> Edit tuned channels

Adjust tuned TV channels – manual tuning

You can store TV channels on channel

numbers of their own. Fine tune the channel

reception, indicate the presence of coded

channels and choose appropriate sound types

for the individual channels.

The item TV SYSTEM appears on the menu, then

make sure that the correct broadcast system is

displayed before you begin tuning.

If channels are broadcasted with two languages

and you want both languages, you can store the

channel twice, once with each language.

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

Even though you store a type of sound/language,

you can switch between the various types while

watching a TV channel. For further information,

refer to the chapter ‘Adjust sound and picture

format’ on page 8.

> Press GO to bring up the TUNING menu and

press to highlight MANUAL TUNING.

> Press GO to bring up the MANUAL TUNING

menu.

> Press or to move between items on the

menu.

> Press or to view your choices for each item.

> If you choose NAME, then press the green button

to start the naming procedure. Use or and

to enter the characters in the name you

choose.

> When you have ﬁnished editing, press GO to

store the adjusted channel.

> Press EXIT to exit all menus.

MANUAL TUNING

FREQUENCY

217

CHANNEL NO.

NAME

DR1

FINE TUNE

DECODER

TV SYSTEM

SOUND

OFF

B/G

STEREO

store

Re-tune or add channels

You can make your television find

your TV channels for you.

Re-tune via automatic tuning

You can re-tune all your TV channels by

letting the television tune in all the channels

automatically.

AUTO TUNING

.....................................................................

Preset up to 99 different TV channels

on channel numbers of their own

and give each channel a distinct

name.

. . . . . . . . . . . .

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

> Press GO to bring up the TUNING menu and

press to highlight AUTO TUNING.

> Press GO to bring up the AUTO TUNING menu.

> Press to start auto tuning.

You can tune in new channels, for

example, if you move – or re-tune

previously deleted channels.

start

> Once auto tuning is completed, the EDIT

CHANNELS menu appears. You can then

rearrange the channel order, delete channels or

rename them.

Please note: If you re-tune all your TV channels,

all channel settings, you have made, disappear!

When tuning in channels via the ADD

CHANNEL menu, your previously

tuned channels are left unchanged.

This allows you to keep channel

names, their order in the TV list, and

any special settings you may have

stored for those channels, such as

decoder or broadcast system settings.

Add new channels

You can add a new channel or update a tuned

channel which, for example, has been moved

by the broadcaster.

ADD CHANNELS

.....................................................................

. . . . . . . . . . . .

10 . . . . . . . . . . . .

11 CNN

12 N3

13 . . . . . . . . . . . .

14 SAT 1

15 SVT 2

16 NRK

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu.

TUNING is already highlighted.

17 TV4

> Press GO to bring up the TUNING menu and

press to highlight ADD CHANNEL.

18 . . . . . . . . . . . .

start

> Press GO to bring up the ADD CHANNEL menu.

> Press to start. New channels are added

automatically as they are found.

> When tuning is completed and new channels

have been added, the EDIT CHANNELS menu

appears. You can then rearrange the channel

order, delete channels or rename them. The

cursor highlights the ﬁrst new channel of those

just added to the list.

If a channel is stored on Channel no. 99, you

cannot activate the ADD CHANNELS function.

Adjust picture and sound settings

Picture and sound settings are preset

from the factory to neutral values

which suit most viewing and listening

situations. However, if you wish, you

can adjust these settings to your

liking.

Change brightness, colour or contrast

Adjust the picture settings via the PICTURE

menu. Temporary settings are cancelled

when you switch off the television.

PICTURE

BRIGHTNESS

CONTRAST

COLOUR

TINT

...............

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight PICTURE.

SIZE

Adjust picture brightness, colour or

contrast. Sound settings include

volume, bass and treble.

> Press GO to bring up the PICTURE menu.

> Press or to move through menu items.

> Press or to adjust the values.

select

> Press EXIT to store your settings until you

switch off the television, or …

When signals are sent in format 1080p or 1080i,

the menu item SIZE is available in the picture

menu.

Store your picture and sound settings

temporarily – until your television is

switched off – or store them

permanently.

> … press GO to store your settings permanently.

To temporarily remove the picture from the screen, What’s on the PICTURE menu …

press LIST repeatedly to display P.MUTE on Beo4,

then press GO. To restore the picture again, press

any source button, such as TV.

BRIGHTNESS … Adjusts the picture brightness.

CONTRAST … Adjusts the contrast level in the

picture.

For information about how to change

the picture format, refer page 9.

COLOUR … Adjusts the colour intensity in the

picture.

(SIZE) … If you experience any irregularities along

the edges of the picture, select SIZE and adjust.

If a source, such as a PC, is connected via the VGA

socket, the following options appear:

HOR. SIZE … Adjusts the width of the picture.

VERT. SIZE … Adjusts the height of the picture.

HOR. POSITION … Adjusts the position of the

picture horisontally.

VERT. POSITION … Adjusts the position of the

picture vertically.

For video sources using the NTSC signal, a further

option – Tint (colour shade or nuance) – will be

available for adjustment.

Sound adjustments

Sound settings are preset at the factory to

neutral values which suit most listening

situations. However, if you wish, you can

adjust these settings to your liking.

> Press MENU to bring up the TV SETUP menu

and press to highlight SOUND.

> Press GO to bring up the SOUND menu,

ADJUSTMENT is highlighted already.

> Press GO to bring up the SOUND ADJUSTMENT

menu.

SOUND

VOLUME

BASS

...............

TREBLE

...............

LOUDNESS

OFF

You can preset levels for sound volume, bass,

treble and a connected BeoLab subwoofer.

DEFAULT VIDEO

DEFAULT AUDIO

> Press or to select an item to adjust.

> Press or to adjust the values or choose a

setting.

You can switch the loudness feature on or off.

The loudness feature compensates for the

human ear’s lack of sensitivity to high and

low frequencies. These frequencies are

boosted at low volume levels so that low

music becomes more dynamic.

store

> Press or to move through menu items.

> Press EXIT to store your settings until you

switch off your television.

The contents of the SOUND menu varies according

to what you have connected to the television.

> Press GO to store your settings permanently.

What’s on the SOUND menu …

In addition you can preset two default

speaker combinations; one to be used each

time you switch on a video source in your

system, and one to be used each time you

switch on an audio source connected to your

system. You can still select a different speaker

combination any time you wish, refer to page

9 for further information.

VOLUME … Adjusts the volume level the TV uses

when you switch it on.

BASS … Adjusts the bass level.

TREBLE … Adjusts the treble level.

SUBWOOFER … (only available if you have

connected a BeoLab subwoofer) Adjusts the

sound level from the subwoofer.

LOUDNESS … Loudness can be set to YES or NO.

DEFAULT VIDEO … Set the speaker combination

you want to use when switching on a video

source in your system. Options are 3 and 5.

DEFAULT AUDIO … Set the speaker combination

you want to use when switching on an audio

source in your system. Options are 2 and 4.

Refer to page 33 for further information on

speaker combinations.

Choose menu language

You can select the language for on-screen

menus via the TV SETUP menu. The text on

the screen changes as you move from

language to language.

The menu language you choose

during the first-time setup of your

television can be changed at any

time.

MENU LANGUAGE

DANSK

DEUTSCH

ENGLISH

ESPANOL

> Press TV to switch on the television.

> Press MENU to bring up the TV SETUP menu

and press to highlight MENU LANGUAGE.

> Press GO to bring up the MENU LANGUAGE

menu.

FRANCAIS

ITALIANO

Once a menu language is chosen, all

menus and display messages are

shown in this language.

NEDERLANDS

SVENSKA

select

> Use and to move to your language choice.

> Press GO to make your choice.

> Press STOP to back up through previous menus

or press EXIT to exit all menus directly.

Placement, sockets and connections

In this chapter, you can find out how

to place and connect your television.

It also gives you an overview of the

socket panels.

Daily operation, 4

Find out how to use the Beo4 remote control, bring up the menus on the screen,

operate the daily functions of your television and how to adjust sound and picture

format. In addition, find an overview of the on-screen menu system.

We recommend that you follow the

procedure described below when

you set up your television:

– Unpack the television

Advanced operation, 13

Find out how to operate a connected source, bring up a computer image on the

screen and operate your television in Option 4. In addition find out how to operate

an audio system, how to operate your television in a BeoLink system, and how to

disable the internal TV tuner.

– Consider the appropriate

surroundings for your television

– Mount the television on the

chosen stand or bracket

Tuning and preference settings, 25

Find out how to set up your television for the first time, tune in and edit channels.

How to register additional sources and make a surround sound setup. This chapter

also contains information about settings for picture and sound.

– Place the television

– Connect the cables, additional

equipment, and speakers

This procedure is described in detail

on the following pages.

Placement, sockets and connections, 45

•

Set up the television, 46

Connection panels, 50

Camera and headphones sockets, 52

Maintenance, 53

How to clean your television and change batteries in the Beo4 remote control.

Index, 54

Set up the television

For information about how to fasten

and run the cables on the rear of the

television, refer to this page.

Handling your television

Avoid placing the television in direct sunlight

or direct artiﬁcial light, such as a spotlight, as

this may reduce the sensitivity of the remote

control receiver. Also if the screen is over-

heated, black spots may appear in the picture.

These spots disappear again, once the tele-

vision cools down to normal temperature.

For further information about the

connection panels, refer to page 50.

To avoid injury, use Bang & Olufsen approved

stands or wall brackets only.

Make sure that the television is set up, placed

and connected in accordance with these

instructions.

Place the television on a firm and stable surface.

The standard placement allows you to tilt the tele-

vision, for example to facilitate viewing at a low

placement. To tilt the television pull at the bottom

of the television

The television is developed for indoor use in

dry, domestic environments only. Use within

a temperature range of 10–40°C (50–105°F).

If you are going to place the television on either the

floor stand or the wall bracket, the two standard

‘feet’ must be removed from the television. Follow

the instructions in the Guide enclosed with these

optional accessories.

Do not place any items on top of the tele-

vision.

Do not attempt to open the television. Leave

such operations to qualiﬁed service personnel.

The television was designed to be left in standby

mode when not in use. Therefore, to facilitate

remote control operation, it is essential that

you do not disconnect it from the mains. The

television can only be switched off completely,

if you disconnect it from the mains.

To remove the two covers for the main connection

panel, first pull out, then pull down at the bottom

– also if the television is placed on a stand. To

release the cover for the Smart Card and CA-

module (3), press the cover to the right.

Always remove cover 1 before removing cover 2.

When you have made all the connections and

fastened the cables, mount the cable covers again.

IMPORTANT! For safety reasons the mains supply

cable must be fastened to the cable strip (A). All

cables must be run through the cable strip (B).

When connections are complete and the

cables have been secured as described, switch

on the mains supply. A tiny, red light appears.

However, if your setup includes a VGA connection, The system is in standby mode and ready to

do not run the VGA cable through the cable strip

(B). Instead, use the two screws in the VGA plug

to fasten it to the socket.

be used.

If your television is set up on its own, you can

now tune in channels as explained in the

chapter ‘First-time setup of your television’

on page 26.

If you are going to connect any other equipment

to the television, do not connect it to the mains

yet!

The supplied mains cord and plug are specially

designed for the television. If you change the plug

or in any way damage the mains cord, it will affect

the TV picture adversely!

>> Set up the television

Connections

The diagrams on these two pages outline

how to set up the television with video

sources and loudspeakers, and how to expand

the setup, for example with a compatible

Bang & Olufsen audio system, or with a

computer.

POWER LINK

SUB

DVB

POWER LINK

FRONT

Refer to ‘Connection panels’ on page 50 for

further information about each of the sockets.

AERIAL

POWER LINK

REAR

Refer to ‘Register additional video

equipment’ on page 28 for further

information about how to set up connected

equipment for use.

Video signals

Connect your video signal sources, such as cable

Additional video equipment

The sockets on the connection panel allow you to

or aerial to the sockets mentioned on the diagram. have different types of video equipment connected

at the same time. We expect your Bang & Olufsen

Loudspeakers

retailer to deliver, install and set up your products.

The television has built-in loudspeakers. However,

you can expand the system into a surround sound

setup – including a subwoofer. Refer to ‘Loud-

speaker setup – surround sound’ on page 30 for

further information.

Equipment with HDMI™ input

Equipment with HDMI input can be connected to

any of the HDMI sockets, regardless of the

particular AV socket to which you have connected

the equipment.

Remember to set the L – R switch on each loud-

speaker to L and R (the left and right sound channel,

respectively).

AV 1–2

AV 1–4

AV 4

Decoder

DVD

R – L

(AV3)

MASTER

LINK

Satellite (STB)

Recorder (HDR)

VGA

This diagram shows examples of additional video

Computer

Audio system

equipment that can be connected to the television You can connect a computer and use the tele-

at one time. If you have a Bang & Olufsen recorder, vision as a monitor.

it must be connected to the AV4 socket.

If you have a Bang & Olufsen audio system with a

Master Link socket, you can connect it to the tele-

vision. Use a Master Link cable, and connect it to

the Master Link socket. Refer to ‘Connect your

audio system’ on page 18.

IMPORTANT: Disconnect the television, the

IR-transmitters

computer, and all equipment connected to the

computer from the mains, before you make the

connections. Furthermore, the computer must be

connected to a grounded wall outlet as specified in

the computer’s setting-up instructions!

In order to operate non-Bang & Olufsen products

with your Bang & Olufsen remote control, attach a

low-power IR-transmitter to each of the products.

Plug each IR-transmitter into one of the sockets

marked PUC on the connection panel.

Connect the computers VGA output to the VGA

input on the television. To hear sound from the

computer in the television loudspeakers, connect

the sound output to the AV3 R – L sockets on the

t e le v is io n .

Connection panels

Standard sockets

System Module sockets

The connection panels on your television

allow you to connect signal input cables

as well as a variety of extra equipment,

such as a video recorder or DVD.

~ (Mains supply)

AV 4

Connection to the mains supply.

21-pin sockets for connection of additional video

equipment. If you have a Bang & Olufsen recorder,

we recommend that you connect it to this socket.

HDMI-IN (A–B)

The equipment you connect to these

sockets must be registered in the

CONNECTIONS menu. For further

information, refer to the chapter

‘Register additional video equipment’ on

page 28.

HDMI™ (High Deﬁnition Multimedia Interface)

sockets for connection of an HDMI video source

or a PC. Sources connected to these sockets can

be registered to any of the AV sockets. Supported

formats are:

MASTER LINK

Socket for connection of a compatible Bang &

Olufsen audio system. The socket is also used for

BeoLink distribution of sound throughout the

house.

Video: 480i, 480p, 576i, 576p, 720p, 1080i,

1080p.

PC: 640 x 480, 800 x 600, 1024 x 768.

RF OUT

Aerial output socket for distribution of video

signals to other rooms. Requires an RF Link

Ampliﬁer also.

SPDIF (1–2)

Digital audio input sockets for connection of

external equipment.

PUC (1–4)

For IR control signal to external equipment

(connected to the AV sockets).

AV (1–2)

21-pin sockets for connection of additional video

equipment, such as a DVD player, set-top box, a

decoder or video recorder.

AV 3 (Pr, Pb, Y and R, L, VIDEO)

For connection of video signals from an external

source such as an HDTV source. Can be used in

conjunction with the 21-pin AV sockets – or a

digital audio socket.

VGA

For connection of a PC for reception of analogue

graphics. Supports the following resolutions:

60 Hz; 640 x 480, 800 x 600, 1024 x 768, 1280 x

720.

AERIAL

Aerial input socket for an analogue TV signal, such

as an external aerial or cable TV network.

DVB

Aerial input socket for a digital TV signal.

HDMI IN

SPDIF 1

SPDIF 2

PUC 1

PUC 3

PUC 4

AV 1

AV 2

AERIAL

VGA

PUC 2

AV 3

Standard sockets

MASTER

LINK

OUT

AV 4

DVB

System Module and DVB sockets

SUB

FRONT

REAR

POWER

LINK

Surround Sound Module sockets

Smart Card reader and CA module

SMARTCARD

SUB

Socket for connection of a Bang & Olufsen

subwoofer, for example a BeoLab 2.

For insertion of a card for access to digital channels.

For further information about compatible cards,

contact your Bang & Olufsen retailer.

FRONT – REAR

Sockets for connection of external loudspeakers in CA

a surround sound setup. For insertion of a card and module for access to

digital satellite channels. For further information

about compatible card and module combinations,

contact your Bang & Olufsen retailer.

(USB)

Socket for retailer and installer use only.

Insert the Smart Card in the CA module with the

chip facing the front of the module. Insert the CA

module with the front facing the front of the

television. The Conax Smart Card must be inserted

with the chip facing away from the television

front.

Camera and headphones sockets

You can connect headphones and

listen to a programme, or you can

connect a Camcorder and watch your

home movies on the television. If you

have connected a video recorder, you

Sockets for temporary connections

PHONES

You can connect stereo headphones to the socket

PHONES

marked PHONES. Adjusting volume will affect

both the television speakers and the headphones.

Muting sound will affect television speakers only.

– To mute the speakers connected to the

can copy Camcorder recordings

VIDEO

television, press the middle of the

button.

– When sound is muted in the speakers, press

or to adjust sound in headphones.

Watch and copy from a Camcorder

If you have connected a recorder to your television,

and you connect your Camcorder, you can copy

Camcorder recordings.

– To restore sound in the speakers, press the

middle of the

button.

These sockets are for the connection of a

Camcorder:

To copy a recording from a Camcorder …

> Connect your Camcorder and start playback on

the Camcorder. The television automatically

registers the signal and you can see the pictures

on the television screen.

R – L

For audio connection (right and left sound channel

respectively).

VIDEO

> Press RECORD twice to start recording.

For the video signal.

Watch digital pictures on your television

To watch your camera pictures, connect the camera

and switch the television on. The television auto-

matically registers the signal and you can see the

still pictures on the screen.

If the signal from the camera is switched off …

> Press LIST repeatedly to display CAMERA* on

Beo4 and press GO.

*In order to display CAMERA on Beo4, you must

first add it to the Beo4 list of functions. For further

information, refer to the Guide enclosed with Beo4.

Maintenance

Regular maintenance, such as cleaning

the television, is the responsibility of

the user. To achieve the best result,

follow the instructions to the right.

Contact your Bang & Olufsen retailer

to determine recommendations for

regular maintenance.

Changing the Beo4 batteries

Cleaning

Never use alcohol or other solvents to clean

any part of the television, stand or wall

bracket!

Cabinet surfaces

Wipe dust off the surfaces using a dry, soft

cloth. Remove grease stains or persistent dirt

with a soft, lint-free, ﬁrmly wrung cloth,

dipped in a solution of water containing only

a few drops of mild detergent, such as

washing-up liquid.

The speaker cover may also be cleaned with a

soft brush mounted on a vacuum cleaner, set

to the lowest level.

Picture screen

To clean the picture screen, use a mild

window cleaning ﬂuid (not containing

alcohol). To retain the optimum performance

of the screen, make sure that no streaks or

traces of the cleaning ﬂuid are left on the

screen.

When BATTERY appears in the Beo4 display,

it is time to change the batteries in the

remote control.

The Beo4 requires three batteries. We

recommend that you use Alkaline batteries

only (1.5 V – size AAA). Replace the batteries

as shown on this page. Keep a ﬁnger on top

of the batteries until the lid is replaced.

Beo4

Wipe the Beo4 remote control with a soft,

lint-free, ﬁrmly wrung cloth.

When you have replaced the batteries, wait

about 10 seconds until TV appears in the

display. The Beo4 remote control is then

ready for use.

Do not expose batteries to excessive heat such as

sunshine, fire or the like!

Index

Beo4 remote control

Displays and menus

Changing the Beo4 batteries, 53

Cleaning the Beo4, 53

Displayed information and menus, 5

Menu overview, 12

Introducing your television and Beo4, 4

Replace Beo4 batteries, 53

Using Beo4, 4

On-screen menus, 5

DVB HD

CA module, 51

BeoLink

DVB operation: Refer to the separate DVB HD

BeoVision in a link room, 20

Connect and operate an audio system, 18

Connect your audio system to the

television, 18

Guide

DVB socket, 51

Smart Card, 51

Link connections, 22

First-time setup

Link frequency, 23

Link room operation, 21

Option settings, 20

Calibrate the sound level, 32

Choose menu language, 44

First-time setup procedure, 26

Overview of ﬁrst-time setup, 26

Select your speaker types, 30

Sound adjustments, 8, 43

System modulator, 23

Use an integrated audio/video system, 19

Camera

Connect a Camera, 52

Copy from a Camcorder to a videotape, 52

Format

Available picture formats, 9

Computer monitor

Change the picture format, 9

Adjust picture, 42

Bring up the computer image on the

screen, 16

Headphones

Connect a computer, 49

Connect headphones, 52

Connections

Language

Additional video equipment, 28

Aerial and mains connection, 50

Headphones, 52

Change sound type or language, 8

Choose menu language, 44

First-time setup – choose menu language, 27

Loudspeakers, 30

Socket panel, 50

Loudspeakers

Sockets for temporary connections, 52

Calibrate the sound level, 32

Change speaker balance or combination, 9

Connect loudspeakers, 51

Connect speakers, 51

Contact

Contact Bang & Olufsen, 58

Select your speaker types, 30

Set speaker distance, 31

Sound adjustments, 8, 43

Speaker combinations, 9

Maintenance

Socket panels

Tune

Change Beo4 batteries, 53

Handling your television, 46

Maintenance of your television, 53

Picture screen, 53

Camera and headphones sockets, 52

Connection panels, 50

Add new TV channels, 40

Adjust tuned channels, 38

Auto-tuning – ﬁrst-time setup of your

television, 27

Sockets for temporary connections, 52

Delete tuned channels, 36

Manual tuning, 38

Sound

Master Link

Adjust or mute the sound, 8

Move tuned channels, 36

Name tuned channels, 37

Re-tune via automatic tuning, 40

BeoVision in a link room, 20

Connect and operate an audio system, 18

Connect your audio system to the

television, 18

Adjust volume, bass or treble, 43

Change sound type or language, 8

Change speaker balance or combination, 9

See the name of the active sound system, 34

TV channels

Link connections, 22

Link frequency, 23

Add new TV channels, 40

Adjust tuned channels, 38

Auto-tuning – ﬁrst-time setup of your

television, 27

Subtitles

Link room operation, 21

Option settings, 20

Subtitles from teletext, 11

System modulator, 23

Use an integrated audio/video system, 19

Bring up a channel list, 6

Delete tuned channels, 36

Edit tuned channels, 36

Manual tuning, 38

Surround sound

Calibrate the sound level, 32

Choose a speaker combination, 9

Connect speakers, 51

Peripheral unit

Peripheral Unit Controller menu, 14

Universal Beo4 operation, 15

Move tuned channels, 36

Name tuned channels, 37

Re-tune via automatic tuning, 40

Select a TV channel, 6

See the name of the active sound system, 34

Select speaker types, 30

Use the peripheral unit in a link room, 15

Use the peripheral unit’s own menu, 15

Speaker combinations, 9

Sound adjustments, 8, 43

Picture

TV tuner

Teletext

Adjust brightness, colour or contrast, 42

Adjust picture size, 42

Disable DVB HD, 24

Disable internal tuner, 24

Tuner setup, 24

Basic teletext functions, 10

Change the picture format, 9

Picture formats, 9

Day-to-day use of MEMO pages, 11

Dual-screen teletext, 11

Remove the picture from the screen, 42

Store favourite teletext pages, 11

Placement

Timer

Set up your television, 46

Make the television part of a Timer

programming, 20

Waste Electrical and Electronic Equipment

(WEEE) – Environmental protection

Electrical and electronic equipment, parts and

batteries marked with this symbol must not be

disposed of with normal household wastage; all

electrical and electronic equipment, parts and

batteries must be collected and disposed of

separately.

Collecting electrical and electronic equipment,

batteries and waste prevents the potential

contamination of nature with the hazardous

substances which may be present in electrical and

electronic products and equipment.

Your Bang & Olufsen retailer will advise you of the

correct way of disposal in your country.

When disposing of electrical and electronic

equipment and batteries by use of the collection

systems available in your country, you protect the

environment, human health and contribute to the

prudent and rational use of natural resources.

If a product is too small to be marked with the

symbol, it will appear in the User Guide, on the

Guarantee certificate, or on the packaging.

This product incorporates copyright protection

technology that is protected by U.S. patents

4,631,603; 4,577,216; 4,819,098; 4,907,093; and

6,516,132 and other intellectual property rights.

Use of this copyright protection technology must

be authorized by Macrovision, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

This product is in conformity with the

provisions of the Directives 2004/108/EC

and 2006/95/EC.

Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, and the

double-D symbol are registered trademarks

of Dolby Laboratories.

Conﬁdential unpublished works.

Manufactured under license under U.S. Patent

#’s: 5,451,942; 5,956,674;

HDMI, the HDMI logo and High-Deﬁnition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

5,974,380; 5,978,762; 6,487,535; 7,003,467

& other U.S. and worldwide patents issued

& pending.

DTS is a registered trademark & the DTS logos

and Symbol are trademarks of DTS, Inc.

For your information …

Your needs as a user are given careful

consideration during the design and

development process of a Bang & Olufsen

product and we strive to make our products

easy and comfortable to operate.

Therefore, we hope that you will take the

time to tell us about your experiences with

your Bang & Olufsen product. Anything

which you consider important – positive or

negative – may help us in our efforts to

reﬁne our products.

Thank you!

Write to: Bang & Olufsen a/s

BeoCare

Peter Bangs Vej 15

DK–7600 Struer

or call/fax: Bang & Olufsen

Customer Service

+45 96 84 45 25 (phone)

+45 97 85 39 11 (fax)

or email via: www.bang-olufsen.com

Technical speciﬁcations, features and the use

thereof are subject to change without notice.

3510197

0901

HP Hewlett Packard HP Ultra Slim LED LCD Monitor W1972A User Manual
HP Hewlett Packard Hewlett Packard Computer Monitor L2151W User Manual
GE General Electric Cooktop PP942 User Manual
Electrolux DF 6260 User Manual
Cres Cor RO151HUA9 User Manual
Bravetti Convection Oven CO200B User Manual
AT T 5806 User Manual
Asus Motherboard P9X79LE User Manual
American Dynamics Tyco ADCMLCD19 User Manual
Aga Ranges GCB User Manual