PG221 LCD Monitor
User Guide
Table of contents
Notices.......................................................................................................... v
Safety information ...................................................................................... vi
Care and cleaning ..................................................................................... vii
Package contents ....................................................................................... ix
Chapter 1:
Product introduction
1.1
1.2
1.3
Welcome! .................................................................................... 1-1
Features ........................................................................................ 1-1
Monitor introduction.................................................................... 1-2
Front view....................................................................................... 1-2
Side view........................................................................................ 1-4
Rear view ....................................................................................... 1-5
Chapter 2:
Setup
2.1
Connecting the cables................................................................. 2-1
2.1.1
2.1.2
Connecting to a computer with VGA/DVI ports............... 2-2
Connecting to a video equipment with YPbPr (component)
output ports..................................................................... 2-2
2.1.3
2.1.4
2.1.5
Connecting to a video equipment with video (composite)
output ports:.................................................................... 2-2
Connecting to a video equipment with S-Video (composite)
output ports:.................................................................... 2-2
Connecting to an MP3 player or any other audio device
with Line-out/Headphone ports: ..................................... 2-3
2.2
2.3
Turning on the monitor................................................................ 2-3
Adjusting the tilt........................................................................... 2-3
Chapter 3:
General Instruction
3.1
OSD (On-Screen Display) menu ................................................ 3-1
3.1.1
How to reconfigure.......................................................... 3-1
3.1.2
OSD function introduction............................................... 3-1
3.2
Using the built-in webcam .......................................................... 3-3
3.2.1
3.2.2
Hardware ....................................................................... 3-3
Software ........................................................................ 3-3
iii
Chapter 4:
Appendix
4.1
4.2
4.3
4.4
SRS TurSurround XT™................................................................ 4-1
Troubleshooting (FAQ) ............................................................... 4-2
PG221 specification summary.................................................... 4-3
Supported operating modes ....................................................... 4-4
iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’s
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
As an Energy Star® Partner, our company has determined that this product meets
the Energy Star® guidelines for energy efficiency.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
v
Safety information
•
Before setting up the monitor, carefully read all the documentation that came
with the package.
•
To prevent fire or shock hazard, never expose the monitor to rain or moisture.
•
Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
•
If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
•
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
•
Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
•
•
•
•
•
•
Use the appropriate power plug which complies with your local power
standard.
Do not overload power strips and extention cords. Overloading can result in
fire or electric shock.
Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
•
If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical
and electronic equipment) should not be placed in municipal waste.
Please check local regulations for disposal of electronic products.
vi
Care & Cleaning
•
Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
•
•
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the LCD. Never spray cleaner directly on the screen, as it may drip
inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
•
The screen may flicker during the initial use due to the nature of the fluorescent
light. Turn off the Power Switch and turn it on again to make sure that the
flicker disappears.
•
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
•
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1.
2.
ASUS websites
The ASUS websites worldwide provide updated information on ASUS
Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
viii
Package contents
Check your PG221 LCD monitor package for the following items:
LCD monitor
Support CD
Quick Start Guide
Warranty card
1 x Power cord
1 x VGA-Audio-Microphone-USB 4-in-1 cable
1 x DVI cable
1 x RCA cable
1 x Rear connector cover
If any of the above items is damaged or missing, contact your retailer
immediately.
ix
x
1.1
Welcome!
Thank you for purchasing the ASUS® PG221 LCD monitor!
The LCD monitor features high-quality audio technology, including a 15W ASUS
Power Bass System and the most advanced SRS TruSurround XT™ sound effect
which help provide vivid melody, enhancing your audio enjoyment while you watch
movies, play games, or listen to music! The widescreen design provides a crisper,
broader, and brighter display. The built-in 1.3 megapixel webcam on top of the LCD
panel has both video recording and snapshot functions, allowing you to capture
images, create videos, or hold a video conference! Besides, a host of user-friendly
funcitons such as the rotating swivel, adjustable tilt, and smart touch sensor
buttons facilitate the usage of the monitor, upgrading your work efficiency.
With these features, you enjoy the convenience and delightful audio-visual
experience that the PG221 brings you!
1.2
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
22" widescreen TFT LCD Monitor
True resolution: 1680 X 1050 (WSXGA+)
Anti-reflection glare type panel
2ms (gray-to-gray) quick response time
5W x2 stereo speakers
15W Power Bass System
SRS TruSurround XT™ sound effect (See Appendix I)
3 USB 2.0 ports
Built-in 1.3 megapixel webcam
SPLENDID™ Video Intelligence Technology
5 SPLENDID™ video preset modes switched by hotkey
3 skin-tone selections
5 sound preset modes switched by hotkey
Touch sensor controls
VGA/DVI-D(HDCP)/Composite(Video)/S-Video/
YPbPr(up to 1080i/p) inputs
•
•
•
•
•
Headphone output & microphone input
Tilt/Swivel adjustment
Microsoft® Windows® 2000/XP/Vista compliance
EPA ENERGY STAR® and ergonomic design
RoHS compliance
ASUS PG221 LCD Monitor
1-1
1.3
Monitor introduction
Front view
1.3 megapixel webcam
Stereo speakers
(5Wx2)
Light-in-Motion
scenario lighting
effect
Base
1
6
2
3
5
4
Touch sensors
7
8
9
The touch sensors are sensitive. Slightly touch the item you want to enable.
Do not press the front panel too hard to prevent damage to the panel and the
sensors.
1.
Sensor:
•
Use this hotkey to switch to any of the five video preset modes
(Standard Mode, Theater Mode, Game Mode, Night View Mode,
Scenery Mode) with SPLENDID™ Video Intelligence Technology.
Exit the OSD menu or go back to the previous menu as the OSD menu
is active.
•
•
Automatically adjust the image to its optimized position, clock and phase
by touching the sensor for 2-3 seconds.
2.
3.
Sensor:
•
Touch this sensor to adjust the True Bass funciton. This function is
adjustable only when the SRS TSXT function is activated.
Sensor:
•
•
Touch this sensor to activate the OSD (On-Screen Display) main menu.
Touch this sensor to enter/select the item (function) highlighted while the
OSD menu is activated.
1-2
Chapter 1: Product introduction
4.
5.
Sensor:
•
Use this hotkey to switch to any of the six input sources (VGA, DVI,
Video, S-Video, YPbPr, Music).
Sensor:
•
Use this hotkey to switch to any of the five sound preset modes
(Standard Mode, Fighting Game Mode, Strategic Game Mode, Theater
Mode, Music Mode).
6.
7.
Sensor:
•
•
Touch this sensor to decrease the value of the function selected or move
to the previous function.
This is also a hotkey for Light-in-Motion adjustment.
(Scroll-Bar) Sensor:
•
�ove your finger along this sensor to increase or decrease the value of
the function selected.
•
•
This is also a hotkey for Volume adjustment.
You can quickly access to a certain value of the function selected by
double-clicking one of the five highlighted points on the Scroll-Bar sensor
(as the following figure shows).
five highlighted points
8.
9.
Sensor:
•
•
Touch this sensor to increase the value of the function selected or move
to the next function.
This is also a hotkey for Brightness adjustment.
Power sensor/LED indicator
•
Touch this sensor to turn the monitor on/off.
Status
Blue
Description
ON
Amber
OFF
Standby mode
OFF
ASUS PG221 LCD Monitor
1-3
Side view
1
2
3
4
1
SRS On/Off button. Press this button to turn on/off the SRS sound effect.
2.
USB 2.0 ports. These three Universal Serial Bus (USB) ports are available for
connecting USB 2.0 devices.
3.
4.
Microphone port. This port connects a microphone with a stereo mini-plug
(3.5mm).
Headphone port. This port connects a headphone with a stereo mini-plug
(3.5 mm).
The headphone and the microphone are purchased separately.
1-4
Chapter 1: Product introduction
Rear view
15W ASUS Power Bass
System
Connectors
Kensington lock
';*/5ꢀꢁ
?
6H
6X
8
2
6=8
<-'
=,8
*</
8
2
';*/5ꢀꢂ
</*+5
9ꢃ</*+5
1
2
3
4
5
6
7
8
9
1. AC-in port
2. DVI port
3. VGA port
4. L/R Audio ports + YPbPr ports
5. L/R Audio ports + Video port + S-Video port
6. Line-in port
7. USB port (Upstream)
8. Microphone-output port
9. Woofer port
ASUS PG221 LCD Monitor
1-5
1-6
Chapter 1: Product introduction
2.1
Connecting the cables
Connect the cables as shown:
4
2
1
3
5
6
7
8
9
1. Power cord
2. DVI cable
3. VGA cable
4. L/R audio cable + YPbPr cable
5. RCA cable (Video + L/R audio) + S-Video cable
6. PC audio cable
7. USB cable
8. Microphone cable
9. Woofer cable
•
To connect the signal cables: connect one end of the signal cables to
the monitor, the other end to your computer or any other video
equipment. Refer to section 2.1.1-2.1.5 for details.
•
•
•
To connect the woofer cable: connect the woofer cable to the monitor’s
woofer port.
To connect the power cord: connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power outlet.
To close the rear connector cover: Align the cover to the six slots near
the ports and close the cover carefully. A click indicates that the cover
has been closed successfully.
The supplied VGA-audio-microphone-USB 4-in-1 cable combines the
VGA cable, audio cable, microphone cable, and USB cable.
ASUS PG221 LCD Monitor
2-1
Before you connect the cables, ensure that your PC is switched off or the power
cord is unpluged from the wall socket.
2.1.1
Connecting to a computer with VGA/DVI ports:
1. Connect one end (VGA/audio(gray)/microphone(red)/USB connectors)
of the supplied 4-in-1 cable to the LCD monitor’s corresponding ports
(VGA/Line-in(gray)/microphone-out(red)/USB ports).
2. Connect the other end of the supplied 4-in-1 cable to your computer’s
corresponding ports (VGA/Line-out(green)/microphone-in(red)ports).
3. Connect one end of the supplied DVI cable to the LCD monitor, then
connect the other end to your computer’s DVI port.
When both the VGA and the DVI cables are connected, you can choose either
VGA mode or DVI mode from the Input Select item of the OSD functions, or by
using the hotkey
on the front panel. See pages 1-3 and 3-2 for details.
2.1.2
Connecting to a video equipment with YPbPr
(component) output ports:
1. Connect one end of the YPbPr cable to the YPbPr ports of the LCD
monitor, then connect the other end to the YPbPr output ports of your
video equipment.
2. Plug the red and white connectors of the supplied RCA cable or an L/R
4
audio cable to the LCD monitor’s L/R audio ports (the ports in item
on page 1-5), then connect the other end to the L/R audio ports of your
video equipment.
2.1.3
Connecting to a video equipment with video
(composite) output ports:
1. Connect one end of the supplied RCA cable to the video and L/R audio
5
ports (the ports in item
on page 1-5) of the LCD monitor, then
connect the other end to the video and L/R audio ports of your video
equipment.
2.1.4
Connecting to a video equipment with S-Video
(composite) output ports:
1. Connect one end of the S-Video cable to the LCD monitor’s S-Video port,
then connect the other end to the S-Video port of your video equipment.
2. Plug the red and white connectors of the supplied RCA cable or an L/R
5
audio cable to the LCD monitor’s L/R audio ports (the ports in item
on page 1-5), then connect the other end to the L/R audio ports of your
video equipment.
2-2
Chapter 2: Setup
2.1.5
Connecting to an MP3 player or any other audio
device with Line-out/Headphone ports:
•
Connect one end of an audio cable to the Line-in port of the LCD monitor,
then connect the other end to the Line-out/headphone port of
your MP3 player or an audio device.
The YPbPr, S-Video, and L/R audio cables are purchased separately.
2.2
Turning on the monitor
Gently touch the power sensor
sensor. The power indicator
. See page 1-2 for the location of the power
lights up in blue to show that the monitor is ON.
2.3
Adjusting the tilt
This monitor can be adjusted within the angles as shown:
We recommend that you adjust the viewing angle of the monitor based on the
height of your desk and chair to prevent the light from reflecting to your eyes.
1.
Grasp the top of the monitor and adjust the tilt within -5º to 20º.
-5º~20º
2.
The swivel base allows you to turn the monitor left/right up to 120º.
120º
ASUS PG221 LCD Monitor
2-3
2-4
Chapter 2: Setup
3.1
OSD (On-Screen Display) menu
3.1.1
How to reconfigure
1.
2.
Touch the
Touch
the desired function by touching the
a sub-menu, touch and again to navigate through the sub-menu
functions. Highlight and activate the desired sub-menu function by touching
the sensor.
Change the settings of the selected function by touching
sensor to activate the OSD menu.
and
to navigate through the functions. Highlight and activate
sensor. If the function selected has
3.
4.
and
or
moving your finger along the
(Scroll-Bar) sensor.
To exit the OSD menu, touch the
adjust any other function.
sensor. Repeat step 2 and step 3 to
3.1.2
OSD function introduction
See the table on the next page for details.
•
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
•
ASCR (ASUS Smart Contrast Ratio) function allows the monitor to enhance
dynamic contrast ratio during video playback.
ASUS PG221 LCD Monitor
3-1
OSD menu table:
Main
Splendid
Sub-menu 1
Sub-menu 2
Reset (NO/YES)
Reset (NO/YES)
Reset (NO/YES)
Reset (NO/YES)
Reset (NO/YES)
0~100
Description
Video preset mode for viewing scenery
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
Brightness
Video preset mode for generic windows use
Video preset mode for watching movies
Video preset mode for playing games
Video preset mode for displaying night views
Adjusts brightness of the image
Image
Adjusts contrast of the image
Contrast
0~100
Enables/disables the ASCR function
Adjusts sharpness of the image
ASCR*
ON/OFF
Sharpness*
Satuation*
0~100
Adjusts saturation of the image
0~100
Adjusts horizintal position of the image
Adjusts vertical position of the image
Reduces the horizontal-line noise of the image
Reduces the vertical-line noise of the image
The image appears bluer
Position**
(For VGA only)
H-Position
V-Position
Phase
Focus**
(For VGA only)
Clock
Color
Color Temp
Cool
Normal image color
Normal
The image appears redder
Warm
The image appears sRGB standard color for multimedia
designers
sRGB***
Adjusts Red/Green/Blue levels of the image
User Mode
Selects reddish skin stone
Selects natural skin stone
Selects yellowish skin stone
Skin Tone*
Reddish
Natural
Yellowish
Sound preset mode for generic windows use
Sound preset mode for playing fighting games
Sound preset mode for playing strategic games
Sound preset mode for watching movies
Sound
Preset Mode
Standard Mode
Fighting Game Mode
Strategic Game Mode
Theater Mode
Music Mode
ON/OFF
Sound preset mode for listen to music
Enables/disables the SRS TSXT sound effect
Adjusts the TruBass bass level while SRS TSXT is on
Adjusts the balance between right and left channel sounds
Adjusts 5 bands (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)
Enables/disables the melody function
SRS TSXT
TruBass****
Balance
0~10
-10~+10
Equalizer
Melody
100/300/1K/3K/10K Hz
ON/OFF
Selects 1 of 4 power on/off melodies
Power Key*****
Function Key*****
Selects 1 of 6 function key tones
Selects a preferred input source
Input Select
VGA/DVI/Video/S-Video/YPbPr/Music
Adjusts the aspect ratio while in Video/S-Video/YPbPr mode
System Setup
Aspect Control
(AV only)
Full/4:3/Panorama/
Zoom
Adjusts the aspect ratio while in VGA/DVI mode
Aspect Control
(PC only)
Full/4:3/1:1
Adjusts the luminance of the Light-in-Motion lighting effect
Adjusts horizontal position of the OSD
Adjusts vertical position of the OSD
Adjusts OSD timeout
Light-in-Motion
OSD Setup
0~4
H-Position
V-Position
OSD Timeout
Selects a preferred language among 11 languages
Language
Information
All Reset
Shows the resolution,H/V frequency and input port of current input timing
Returns to default setting
NO/YES
*
: the function is disabled only when the "Standard Mode" of Spendid is selected.
**
: the function is enabled only when the VGA input is selected.
***
: the function is enabled only when the "Standard Mode" of Spendid is selected.
****
: the function is enabled only when the SRS TSXT function is activated.
*****
: the function is enabled only when the Melody function is activated.
3-2
Chapter 3: General Instruction
3.2
Using the built-in webcam
This built-in webcam allows you to take photos and make videos; while talking to
friends via Internet-based communication tools, you can use the webcam to show
your vivid image.
3.2.1
Hardware
•
The 1.3 megapixel webcam transmits images to your PC through the USB
ports. Therefore, make sure that the USB connectors of the supplied 4-in-1
cable are connected to both the LCD monitor and your PC before you use the
webcam. Refer to page 2-1 for the USB connectors.
•
The webcam is adjustable upward and downward as shown.
-30º ~ 30º
Warning: Do not turn the webcam upward or downward over 30º; doing so might
damage the webcam.
3.2.2
Software
To install the webcam driver:
1. Close all other applications first.
2. Insert the support CD into the optical drive and run the ASUS USB2.0
Webcam program.
The default webcam resolution is 640 x 480. If you want to change the default
resolution to meet different kinds of application programs, go to C:\WINDOWS\
ASUS USB2.0 Webcam and activate the program named LiveCam to modify the
settings based on your needs.
•
The default webcam captured video format is VGA (640 x 480)
mode in order to increase the transmission efficiency via all kinds of
Internet commmunication tools.
•
•
Before using the webcam, you need to install the webcam driver into
your PC.
The webcam driver only supports Microsoft® Windows 2000/XP/Vista
operating system with Microsoft® Direct X.
ASUS PG221 LCD Monitor
3-3
3-4
Chapter 3: General Instruction
4.1
SRS TurSurround XT™
SRS TruSurround XT is a novel audio technology which provides an enhanced
listening experience. Utilizing proprietary algorithms from SRS Labs, TruSurround
is intended to regenerate a realistic audio environment, where users feel like being
surrounded by sound.
TruSurround XT is a combination of four distinct and patented processing
techniques from SRS Labs:
•
Dialog Clarity™: the special SRS algorithms solves the signal
disturbance derived from multichannel and improves the dialog clarity of
movies, PC games, on-line chats, etc.
•
•
TruSurround™: this core technology is compatible with all multichannel
formats, allowing you to enjoy virtual surrounding sound experience.
TruBass™: Developed with the proprietary psychoacoustic techniques,
the TruBass technology restores low-frequency tones by augmenting
harmonics.
•
WOW™: WOW is a stereo enhancement technology that extends the
sound space in both the horizontal and vertical planes, trully providing a
3D stereo experience.
SRS TruSurround XT™ stereo surround sound effect
is a trademark of SRS Labs, Inc.
Trusurround technology is incorporated under lincense from SRS Labs, Inc.
ASUS PG221 LCD Monitor
4-1
4.2
Troubleshooting (FAQ)
Problem
Power LED is not ON
Possible Solution
• Touch the sensor to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights amber and there is no
screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark
• Adjust the Contrast and Brightness settings
via OSD.
Screen image is not centered or sized properly
• Touch the
sensor for 2~3 seconds to
automatically adjust the image.
• Adjust the H-Position or V-Position settings
via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does not • Inspect the signal cable and make sure that
look white)
none of the pins are bent.
• Perform Reset via OSD.
• Adjust the R/G/B color settings or select the
Color Temperature via OSD.
Screen image is blurry or fuzzy
• Touch the
sensor for two seconds to
automatically adjust the image (for VGA
mode only).
• Adjust the Phase and Clock settings via
OSD.
No sound or sound is low
• Ensure that the audio cable is properly
connected to the monitor and the computer
• Adjust the volume settings of both your
monitor and computer.
• Ensure that the computer sound card driver
is properly installed and activated.
Webcam is not working
• Ensure that you install the webcam driver which is
in the support CD.
• Make sure that you connect the USB plugs of the
supplied 4-in-1 cable to both the LCD monitor and
your computer.
USB devices work abnormally
• Make sure that you connect the USB plugs of the
supplied 4-in-1 cable to both the LCD monitor and
your computer.
• Check with your PC manufacturer whether your
PC supports USB2.0 or USB1.1.
• If your PC only supports USB1.1, the image
transmission is much slower.
ASUS Power Bass System is not working
• Make sure that the woofer cable is securely
connected to the monitor.
4-2
Chapter 4: Appendix
4.3
PG221 specification summary
Panel size
Panel type
22” Widescreen panel
TFT LCD (anti-reflection glare type)
Max. resolution
Pixel pitch
WSXGA+ 1680 x 1050
0.282 mm
Brightness
300 cd/m2 (typ.)/ 350 cd/m2 (max.)
Contrast ratio (typ.)
Viewing angle(H/V)
Display colors
Response time
1000:1 (ASCR OFF) / 2000:1 (ASCR ON)
170º/160º
16.7 M
2 ms (GTG)
Yes
SPLENDID™ Video
Intelligence Technology
SPLENDID™ selection
Auto image adjustment
5 video preset modes (by hotkey)
Yes (by hotkey)
Color temperature selection 5 color temperatures
Skin-tone selection
PC digital input
PC analog input
Video inputs
3 skin-tones
DVI-D with HDCP
VGA (D-Sub)
Composite (video) x1, S-Video x1,
YPbPr (Component, up to1080i/p) x1
AV Audio inputs
USB 2.0 ports
Line-in port
RCA (R/L) x2
Upstream x1, Downstream x3
3.5 mm Mini-jack
Headphone port
Colors
3.5 mm Mini-jack
Black + Silver
Speaker (Built-in)
Power LED
5W x 2 Stereo + 15W Power Bass System
Blue (On)/ Amber (Standby)
+60º~-60º
Swivel
Tilt
+20º~-5º
Kensington lock
Voltage rating
Power consumption
Dimension (W x H x D)
Net weight
Yes
AC: 100~240V, 50~60Hz
Power On : < 100W, Standby: < 2W
527 mm x 445 mm x 244 mm
10.7 kg (approx.)
Accessories
VGA-Audio-Microphone-USB 4-in-1 cable, DVI cable,
RCA cable, power cord, rear connector cover, quick
start guide, support CD (LifeFrame bundled), warranty
card
Regulation approvals
Energy Star®, CB, CE, Gost-R, CCC, UL/cUL, FCC,
PSB, C-Tick, BSMI, VCCI, RoHS, MIC, Microsoft®
Windows® Vista compliance
* Specifications are subject to change without notice.
ASUS PG221 LCD Monitor
4-3
4.4
Supported operating modes
Resolution
Frequency
720 x 400
Vertical
Frequency
70Hz
Horizontal
Frequency
31.47KHz
Standard
Pixel
28.32�Hz
DOS
VGA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
848 x 480
60Hz
72Hz
75Hz
56Hz
60Hz
72Hz
75Hz
60Hz
31.47KHz
37.90KHz
37.50KHz
35.16KHz
37.90KHz
48.10KHz
46.90KHz
31.02KHz
25.18�Hz
31.50�Hz
31.50�Hz
36.00�Hz
40.00�Hz
50.00�Hz
49.50�Hz
33.75�Hz
SVGA
WVGA
XGA
1024 x 768
1024 x 768
1024 x 768
1152 x 864
60Hz
70Hz
75Hz
75Hz
48.40KHz
56.50KHz
60.02KHz
67.50KHz
65.00�Hz
75.00�Hz
78.75�Hz
108.00�Hz
XGA+
1280 x 768
1280 x 768
1280 x 960
60Hz
75Hz
60Hz
47.78KHz
60.29KHz
60.00KHz
79.50�Hz
102.25�Hz
108.00�Hz
WXGA
QVGA
SXGA
1280 x 1024
1280 x 1024
1360 x 768
60Hz
75Hz
60Hz
64.00KHz
80.00KHz
47.71KHz
108.00�Hz
135.00�Hz
85.50�Hz
WXGA
1440 x 900
1440 x 900
1680 x 1050
60Hz
75Hz
60Hz
55.94KHz
70.64KHz
65.29KHz
106.00�Hz
136.75�Hz
146.25�Hz
WXGA+
WSXGA+
(Primary)
* Modes not listed in the table may not be supported. For optimal resolution, we recommend that
you choose a mode listed in the table above.
4-4
Chapter 4: Appendix
|