Asus Computer Hardware Q87M E User Manual

Q87M-E  
Q87M-E/CSM  
Contents  
iii  
Safety information  
Electrical safety  
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet  
before relocating the system.  
When adding or removing devices to or from the system, ensure that the power cables  
for the devices are unplugged before the signal cables are connected. If possible,  
disconnect all power cables from the existing system before you add a device.  
Before connecting or removing signal cables from the motherboard, ensure that all  
power cables are unplugged.  
Seek professional assistance before using an adapter or extension cord. These devices  
could interrupt the grounding circuit.  
Ensure that your power supply is set to the correct voltage in your area. If you are not  
sure about the voltage of the electrical outlet you are using, contact your local power  
company.  
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service  
technician or your retailer.  
Operation safety  
Before installing the motherboard and adding components, carefully read all the manuals  
that came with the package.  
Before using the product, ensure all cables are correctly connected and the power  
cables are not damaged. If you detect any damage, contact your dealer immediately.  
To avoid short circuits, keep paper clips, screws, and staples away from connectors,  
slots, sockets and circuitry.  
Avoid dust, humidity, and temperature extremes. Do not place the product in any area  
where it may be exposed to moisture.  
Place the product on a stable surface.  
If you encounter technical problems with the product, contact a qualified service  
technician or your retailer.  
About this guide  
This user guide contains the information you need when installing and configuring the  
motherboard.  
How this guide is organized  
This guide contains the following parts:  
Chapter 1: Product introduction  
This chapter describes the features of the motherboard and the new technology it  
supports. It includes descriptions of the switches, jumpers, and connectors on the  
motherboard.  
Chapter 2: BIOS information  
This chapter discusses changing system settings through the BIOS Setup menus.  
Detailed descriptions fo the BIOS parameters are also provided.  
iv  
 
Where to find more information  
Refer to the following sources for additional information and for product and software  
updates.  
1.  
2.  
ASUS websites  
The ASUS website provides updated information on ASUS hardware and software  
products. Refer to the ASUS contact information.  
Optional documentation  
Your product package may include optional documentation, such as warranty flyers,  
that may have been added by your dealer. These documents are not part of the  
standard package.  
Conventions used in this guide  
To ensure that you perform certain tasks properly, take note of the following symbols used  
throughout this manual.  
DANGER/WARNING: Information to prevent injury to yourself when  
completing a task.  
CAUTION: Information to prevent damage to the components when  
completing a task  
IMPORTANT: Instructions that you MUST follow to complete a task.  
NOTE: Tips and additional information to help you complete a task.  
Typography  
Bold text  
Italics  
Indicates a menu or an item to select.  
Used to emphasize a word or a phrase.  
<Key>  
Keys enclosed in the less-than and greater-than sign  
means that you must press the enclosed key.  
Example: <Enter> means that you must press the Enter or  
Return key.  
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key  
names are linked with a plus sign (+).  
v
Package contents  
Check your motherboard package for the following items.  
Motherboard  
Cables  
ASUS Q87M-E motherboard  
2 x Serial ATA 6.0 Gb/s cables  
1 x I/O Shield  
Accessories  
Application DVD  
Documentation  
Support DVD  
User Guide  
If any of the above items is damaged or missing, contact your retailer.  
Q87M-E specifications summary  
CPU  
LGA1150 socket for Intel® 4th Generation Core™ i7 / i5 / i3, Pentium®, and  
Celeron® processors  
* Refer to www.asus.com for Intel® CPU support list.  
Chipset  
Memory  
Intel® Q87 Express Chipset  
4 x DIMMs, max. 32GB, DDR3 1600 / 1333 / 1066 MHz, non-ECC, un-  
buffered memory  
Dual-channel memory architecture  
* Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).  
** When you install a total memory of 4GB capacity or more, Windows® 32-bit  
operating system may only recognize less than 3GB. We recommend a  
maximum of 3GB system memory if you are using a Windows® 32-bit operating  
system.  
Graphics  
Integrated graphics processor  
Multi-VGA output support: D-Sub, DVI, HDMI and DisplayPort ports  
- Supports DisplayPort with max. resolution of 4096 x 2160@24Hz /  
3840 x 2160 @60Hz  
- Supports HDMI with max. resolution of 4096 x 2160 @24Hz / 2560 x  
1600 @60Hz  
- Supports DVI-D with max.resolution of 1920 x 1200 @60Hz  
- Supports D-Sub with max. resolution of 1920 x 1200 @60Hz  
Maximum shared memory of 1 GB  
1 x PCI Express 3.0/2.0 x16 slot  
1 x PCI Express 2.0 x16 slot (@ x4)  
2 x PCI slots  
Expansion slots  
Storage  
Intel® Q87 Express Chipset:  
- 6 x Serial ATA 6.0 Gb/s connector (Cornsilk)  
(continued on the next page)  
vi  
 
Q87M-E specifications summary  
Intel® I217LM Gigabit LAN controller  
LAN  
Audio  
8-channel Realtek® ALC887-VD High Definition Audio CODEC  
-
Supports Jack-Detection, Multi-streaming, Anti-pop Function, Front  
Panel Retasking  
*
Use a chassis with HD audio module in the front panel to support an 8-  
channel audio output.  
USB  
4 x USB 3.0 ports (2 ports at midboard, 2 ports at back panel)  
10 x USB 2.0 ports (6 ports at midboard, 4 ports at back panel)  
ASUS unique features  
ASUS Exclusive Features:  
- ASUS USB 3.0 Boost  
- ASUS Network iControl  
- ASUS GPU Boost  
- ASUS AI SUITE III  
- ASUS Ai Charger  
- ASUS Anti-surge  
- ASUS EPU  
- ASUS UEFI BIOS (EZ Mode)  
ASUS Quiet Thermal Solution:  
- ASUS Fan Xpert 2  
ASUS EZ DIY:  
- ASUS CrashFree BIOS 3  
- ASUS EZ Flash 2  
- ASUS MyLogo 2™  
- ASUS Q-DIMM  
- ASUS Q-SLOT  
100% Solid Capacitors  
1 x PS/2 keyboard port (purple)  
1 x PS/2 mouse port (green)  
1 x DVI port  
Rear panel I/O ports  
1 x D-Sub port  
1 x HDMI port  
1 x DisplayPort port  
1 x LAN (RJ-45) port  
4 x USB 2.0/1.1 ports  
2 x USB 3.0 ports  
3 x Audio jacks  
(continued on the next page)  
vii  
Q87M-E specifications summary  
Internal connectors/  
switches/ buttons  
1 x USB 3.0 connector supports additional 2 USB 3.0 ports  
3 x USB 2.0 connectors support additional 6 USB 2.0 ports  
6 x SATA 6.0 Gb/s connector  
1 x Chassis intrusion connector  
1 x Clear CMOS jumper  
1 x 4-pin CPU fan connector  
2 x 4-pin Chassis fan connectors  
1 x Front panel audio connector (AAFP)  
1 x System panel connector  
1 x Speaker connector  
1 x LPT Header  
2 x COM Headers  
1 x 24-pin ATX power connector  
1 x 8-pin ATX 12V power connector  
1 x DIS ME jumper  
TPM IC onboard  
BIOS features  
128 Mb Flash ROM, AMI BIOS, PnP, DMI v2.0, WfM2.0, SM BIOS v2.7,  
ACPI v2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree  
BIOS 3  
Manageability  
Support DVD  
WfM 2.0, DMI 2.0WOL by PME, WOR by PME, PXE  
Drivers  
ASUS utilities  
ASUS Update  
Anti-virus software (OEM version)  
Form factor  
MicroATX form factor: 9.6”x 8.8” (24.4cm x 22.4cm)  
Specifications are subject to change without notice.  
viii  
Product introduction  
1
1.1  
Before you proceed  
Take note of the following precautions before you install motherboard components or change  
any motherboard settings.  
Unplug the power cord from the wall socket before touching any component.  
Before handling components, use a grounded wrist strap or touch a safely grounded  
object or a metal object, such as the power supply case, to avoid damaging them due  
to static electricity.  
Hold components by the edges to avoid touching the ICs on them.  
Whenever you uninstall any component, place it on a grounded antistatic pad or in the  
bag that came with the component.  
Before you install or remove any component, ensure that the ATX power supply is  
switched off or the power cord is detached from the power supply. Failure to do so  
may cause severe damage to the motherboard, peripherals, or components.  
1.2  
Motherboard overview  
Before you install the motherboard, study the configuration of your chassis to ensure that the  
motherboard fits.  
Unplug the power cord before installing or removing the motherboard. Failure to do so can  
cause you physical injury and damage to motherboard components.  
1.2.1  
Placement direction  
When installing the motherboard, place it into the chassis in the correct orientation. The edge  
with external ports goes to the rear part of the chassis as indicated in the image.  
1.2.2  
Screw holes  
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.  
Do not overtighten the screws! Doing so can damage the motherboard.  
1-1  
ASUS Q87M-E  
 
Place this side  
towards the rear  
of the chassis  
Q87M-E  
1.2.3  
Motherboard layout  
1
2
2
3
4
1
5
22.4cm(8.8in)  
KBMS  
CPU_FAN  
DIGI  
+VRM  
EATX12V  
ASM  
1442  
3
USB78  
COM2  
USB3_56  
1
6
Super  
I/O  
LAN_USB34  
AUDIO  
CHA_FAN2  
COM1  
CHA_FAN1  
BATTERY  
LPT  
PCIEX16_1  
Clarkvill  
I217  
SATA6G_5 SATA6G_6  
PCI2  
ASM  
1083  
Intel®  
Q87  
Q87M-E  
PCI1  
SATA6G_3 SATA6G_4  
SATA6G_1 SATA6G_2  
7
ALC  
887-VD2  
PCIEX16_2  
USB910  
SB_PWR  
USB1112  
USB1314  
CLRTC  
CHASSIS  
F_PANEL  
DIS_ME  
SPEAKER  
AAFP  
16  
15  
14 13  
12  
11  
10  
9
8
1-2  
Chapter 1: Product introduction  
1.2.4  
Layout contents  
Connectors/Jumpers/Slots/LED  
Page  
1-16  
1-13  
1-14  
1-3  
1. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2)  
2. Serial port connectors (10-1 pin COM)  
3. ATX power connectors (24-pin EATXPWR, 8-pin ATX12V)  
4. Intel® LGA1150 CPU socket  
5. DDR3 DIMM slots  
1-7  
6. USB 3.0 connector (20-1 pin USB3_12)  
7. Intel® Q87 Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~6 [yellow])  
8. System panel connector (10-1 pin F_PANEL)  
9. Intel® ME jumper (3-pin DIS_ME)  
1-17  
1-16  
1-18  
1-11  
1-14  
1-10  
1-17  
1-15  
1-15  
1-18  
1-18  
10. Speaker connector (4-pin SPEAKER)  
11. Clear RTC RAM (3-pin CLRTC)  
12. USB 2.0 connectors (10-1 pin USB9~14)  
13. Chassis intrusion connector (4-1 pin CHASSIS)  
14. Front panel audio connector (10-1 pin AAFP)  
15. Onboard LED (SB_PWR)  
16. LPT connector (26-1 pin LPT)  
1.3  
Central Processing Unit (CPU)  
This motherboard comes with a surface mount LGA1150 socket designed for the Intel 4th  
generation Core™ i7 / Core™ i5 / Core™ i3, Pentium® , Celeron® processors.  
Q87M-E  
Q87M-E CPU socket LGA1150  
1-3  
ASUS Q87M-E  
 
Unplug all power cables before installing the CPU.  
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and  
the socket contacts are not bent. Contact your retailer immediately if the PnP cap  
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard  
components. ASUS will shoulder the cost of repair only if the damage is shipment/  
transit-related.  
Keep the cap after installing the motherboard. ASUS will process Return Merchandise  
Authorization (RMA) requests only if the motherboard comes with the cap on the  
LGA1150 socket.  
The product warranty does not cover damage to the socket contacts resulting from  
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP  
cap.  
1.3.1  
Installing the CPU  
1
A
B
3
2
1-4  
Chapter 1: Product introduction  
C
4
5
A
B
1.3.2  
CPU heatsink and fan assembly installation  
Apply the Thermal Interface Material  
to the CPU heatsink and CPU  
before you install the heatsink and  
fan if necessary.  
1-5  
ASUS Q87M-E