91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 1
User Manual (Part 2)
5.8 GHz Cordless
Telephone
E5600/E5603B
with Caller ID & CallWaiting
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 1
User Manual (Part 2)
5.8 GHz Cordless
Telephone
E5600/E5603B
with Caller ID & CallWaiting
Table of contents
Getting Started
Caller ID Logs
Quick reference guide ........................2
Parts checklist.......................................4
Before you begin..................................6
Telephone base installation................7
Battery installation & charging ..........8
Wall mounting ......................................9
Belt clip & optional headset.............10
How Caller ID works.......................21
To review your call log.....................22
Appendix
Screen icons, indicator lights & tones...23
Adding new handsets........................24
Replacing a handset...........................25
Re-Registering a handset..................26
In case of difficulty.............................27
Technical specifications ....................28
Index.....................................................29
Telephone Operation
Basic operation...................................11
Options while on calls......................12
Intercom calls .....................................13
Call transfer ........................................14
Handset settings.................................15
Phone book
About the phone book.....................17
New phone book entries.................18
Phone book search............................19
To dial, delete or change entries ...20
1
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 2
Getting Started
Quick reference guide
Handset
Select/Menu
V CID
Press to display menu, or to select
highlighted item from menu.
Press to scroll down in menus.
Press when phone is not in use to display
Caller ID information (see page 22). While
entering names, press to move the cursor
to the left.
^ PHONE BOOK
Press to scroll up in menus.
Press when phone is not in use to display
phone book entries (see page 17). While
entering names, press to advance cursor.
Phone/Flash
Off/Clear
Press to begin a call, then dial a number.
During a call, press to receive an incoming
call, if Call Waiting is activated (see page 12).
During a call, press to hang up.
While using menus, press to cancel an
operation, back up to the previous
menu, or exit the menu display.
Redial/Pause
Mute/Delete
Press to view redial memory (see page 11).
While entering numbers, press and hold to
insert a dialing pause (see page 18).
Press to mute microphone (see page 12).
While reviewing call log, press and hold to
clear Caller ID log (see page 22).
Speaker
Intercom
Press to activate handset speakerphone.
Press again to resume normal handset use
earpiece (see page 11).
Press to initiate an intercom
conversation or transfer a call (see page
13 and 14).
Feature menu
> shows highlighted item
Feature Menu
Press
through menu items.
^
or
V
to scroll
Phone book ............See page 17
Call Log ..................See page 21
Ringer Volume........See page 15
Ringer Tone............See page 15
Key Tone ................See page 15
Language................See page 16
Clear MSG WAIT....See page 16
Dial Type ................See page 16
>PHONE BOOK
CALL LOG
Press SELECT to select or
modify a highlighted item.
Press OFF to cancel an
operation, back up to the
previous menu, or exit the menu
display.
Menu
2
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 3
Getting Started
Quick reference guide
Telephone Base
Handset Locator
Press to locate handset if lost (see page 11).
Message Waiting
In Use
Charging
On when handset battery is
charging.
Flashes when you have new voice
mail (requires voice mail service from
your local telephone company).
On when handset is in use. Flashes
when another phone is in use on the
same line.
3
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 4
Getting Started
Parts checklist for E5600
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Telephone handset
Telephone base
Power
adapter
Battery
Belt clip
Telephone line cord
Wall mount bracket
4
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 5
Getting Started
Parts checklist for E5603B
Remember to save your sales receipt and original packaging in case you ever need to
ship your telephone for warranty service. Check to make sure the telephone package
includes the following:
Telephone base
Telephone handsets
CHARGING
CHARGING
Handset chargers
Power adapters
Batteries
Wall mount bracket
Telephone line cord
Belt clips
5
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 6
Getting Started
Before you begin
About Caller Identification
Telephone operating range
Caller ID with Call Waiting features in
this telephone let you see who’s calling
before you answer the phone, even
when you’re on another call. These
features require services provided by
your local telephone company.
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and base
can communicate over only a certain
distance — which can vary with the
locations of the base and handset, the
weather, and the construction of your
home or office.
Contact your telephone service
provider if:
• You have both Caller ID and Call
Waiting, but as separate services
(you may need combined service)
If you receive a call while you are
out of range, the handset might not
ring — or if it does ring, the call might
not connect when you press PHONE.
Move closer to the base, then press
PHONE to answer the call.
• You have only Caller ID service, or
only Call Waiting service
• You don’t subscribe to any Caller
ID or Call Waiting services.
If you move out of range during a
phone conversation, you might hear
noise or interference. To improve
reception, move closer to the base.
You can use this phone with regular
Caller ID service, and you can use its
other features without subscribing to
either Caller ID or combined Caller ID
with Call Waiting service. There may
be fees for these services, and they
may not be available in all areas.
If you move out of range without
pressing OFF, your phone will be left
off the hook. To hang up properly,
walk back toward the telephone base,
periodically pressing OFF until the call
is disconnected.
Caller ID features will work only if
both you and the caller are in areas
offering Caller ID service, and if both
telephone companies use compatible
equipment.
See Caller ID Operation, beginning on
page 21, for more details about how
these features work.
6
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 7
Getting Started
Telephone base installation
Install the telephone base as shown below. Choose a base location away from
electronic equipment, such as personal computers, television sets or microwave ovens.
Avoid excessive heat, cold, dust or moisture.
Plug power cord
transformer into
electrical outlet.
Plug telephone
line cord into
telephone jack.
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111.
Be sure to use an electrical outlet not controlled by a wall switch.
7
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 8
Getting Started
Battery installation & charging
After battery installation, place the handset in the base unit and allow to charge for 15
hours before use. You can keep the batteries charged by returning the handsets to their
base unit or charger after each use. When the battery is fully depleted, a recharge takes
about 12 hours. Average talk time on a fully charged battery is about eight hours depending
on environmental conditions, standby time is approximately four days.
LOW BATTERY
Low battery indicator
Return handset to base to
recharge when this symbol
flashes. (Handset will beep
when battery is low.)
Insert supplied
battery.
Press tab to open
battery compartment.
Caution: Use only supplied
rechargeable battery or AT&T
Replace
compartment cover.
replacement battery model 2420 (SKU
00578. Part number 80-5542-00-00).
Place handset in base to charge
for 15 hours before first use.
8
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 9
Appendix
Wall mounting
The base can be installed on any standard wall-phone outlet as shown below. Choose
a location away from electronic equipment, such as personal computers, television sets
or microwave ovens. Avoid excessive heat, cold, dust or moisture.
Install the line cord as
shown in the diagram.
Connect cords as shown on page 7, then press and slide down
firmly so base is held securely on outlet mounting pegs.
Plug power cord
transformer into
electrical outlet.
Plug telephone line
cord into telephone jack.
Clip wall-mount bracket
securely into notches on
underside of base.
9
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 10
Appendix
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry standard 2.5 mm
headset (purchased separately). For best results use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap)
10
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 11
Telephone Operation
Elapsed time
Basic operation
Making and answering calls
PHONE
00:00:12
To answer an incoming call, press PHONE (or SPEAKER,
or any dial pad key). To make a call, press PHONE or
SPEAKER, then dial a number. Press OFF to hang up.
To preview numbers before dialing, enter numbers first,
then press PHONE or SPEAKER to dial. Press DELETE
or CLEAR at any time to make corrections as you are
entering numbers.
The screen displays the elapsed time as you talk (in
hours, minutes and seconds).
Hands-free speakerphone calls
To answer a call, press SPEAKER. To make a call, press
SPEAKER, then dial a number. During a call you can
press SPEAKER to toggle between hands-free
speakerphone and normal handset use. Press OFF to
hang up.
SPEAKER
00:00:12
Last number redial
REDIAL
555-1234
Press REDIAL to display the most recently called
numbers (up to 32 digits). Use the ^V buttons or
continue to press REDIAL to view up to four other
recently called numbers. The handset will beep twice at
the beginning or end of the list.
Press PHONE or SPEAKER to redial any displayed
number. Press DELETE to delete the number from the
redial memory.
Handset locator
If you misplace the handset, press HANDSET LOCATOR
at the base. The handset will beep for 60 seconds to
help you locate it. To stop the beeping, press PHONE,
SPEAKER, or any dial pad button at the handset, or
press HANDSET LOCATOR at the base.
11
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 12
Telephone Operation
Options while on calls
Volume control
Press the VOLUME buttons on the side of the handset
to adjust listening volume. Each button press raises or
lowers volume by one level.
When you change the volume level, the new setting
becomes the default. The new volume level will be
applied each time you use the handset, speakerphone
or headset.
Volume
Flash
Call waiting
If you have Call Waiting service, you will hear a beep if
someone calls while you are already on a call. Press
FLASH to put your current call on hold and take the new
call. You can press FLASH at any time to switch back
and forth between calls.
3-way conference calls
PHONE
00:00:12
MICROPHONE MUTED
During an outside call, if you have added new handsets
(see page 24) you can use two system handsets for a
three-way conversation.
MUTE
While a call is in progress, others can press PHONE or
SPEAKER to join the conference call. Others can press
OFF or place the handset in the base or charger to drop
out of the conference call, but the call will not be
terminated until all handsets hang up.
Mute
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again and resume speaking.
Off
Ring silencing
Press OFF or MUTE while the phone is ringing to silence
the ringer.
Tone
Mute
Temporary tone dialing
If you have dial pulse (rotary) service, you can switch to
touch tone dialing during a call by pressing *.
12
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 13
Telephone Operation
Intercom calls
Intercom calls
Use the intercom feature to have conversations
between the handsets. If you have added additional
handsets, see page 24 to register the handsets.
Press the INTERCOM button on a handset to initiate an
intercom call. Then after entering the number of the
handset you wish to intercom with, your handset will
call the other handset.
Press PHONE, INTERCOM, SPEAKER, or any dial pad
key on the handset being paged to enter intercom
mode with the first handset.
To end the intercom call, press OFF, press INTERCOM
or place the handset in the base or charger.
NOTE: The intercom feature cannot be utilized while any handset is in
phone book or call log mode. Pressing INTERCOM while on an outside call
will initiate Call Transfer ( see page 14).
Handling incoming calls
The phone will beep if you receive an outside call during
an intercom conversation. Now you can either:
• Press PHONE to terminate the intercom call and
answer the incoming call.
OR
• Press INTERCOM or OFF to disconnect the intercom
connection without answering the outside call.
13
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 14
Telephone Operation
Call transfer
Call transfer
If you have added additional handsets (see page 24),
you can transfer an external call from one handset
to another handset.
• The first handset (HS1) can forward an external
call to another handset (HS2, HS3, or HS4) by
pressing the INTERCOM key. The first handset
(HS1) will display “ENTER HANDSET #.”After
entering the handset number to which you want
to transfer the call, HS1 will display CALL
FORWARDED.
• To answer the call, the selected system handset
can press PHONE, SPEAKER or any dial pad keys.
NOTE: If the transferred call is not answered within 30 seconds,
the external call will be returned to the handset that originated the transfer,
and its display will show CALL BACK. If the returned call is not answered
within an additional 30 seconds, the external call will end automatically.
14
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 15
Telephone Operation
Highlighted
menu item
Handset settings
At the feature menu you can change settings to
customize how the telephone works.
> PHONE BOOK
CALL LOG
Press MENU, then use the ^V buttons to scroll to
the feature you want to change. As you scroll through
the menu, the top menu item is always highlighted with
a > symbol. Press SELECT to select the highlighted item.
Press OFF at any time to cancel an operation, back up
to the previous menu, or exit the menu display.
Ringer volume
RINGER VOLUME
At this menu you can set a default ring volume level
(1-6), or turn the ringer off. Use the ^V buttons to
hear an example of each volume level, then press
SELECT to select the one you prefer.
Ringer volume can also be adjusted by pressing
VOLUME on the side of the handset during incoming
ringing.
OUTSIDE TONE
1
Ringer tone
This feature allows you to choose one of 10 ringing
INTERCOM TONE
1
tones for outside calls or intercom calls. Use the ^V
buttons to hear an example of each ringer tone, then
press SELECT to select the one you prefer.
Key tone
KEY TONE
ON
The handset is factory programmed to beep at each key
press. Use the ^V buttons to select ON or OFF,
then press SELECT to save your preference.
15
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 16
Telephone Operation
Handset settings
Language
LANGUAGE
ENGLISH
At this menu you can select the language used in all
menus and screen displays. Use the ^V buttons to
select English, Spanish or French, then press SELECT to
save your preference.
Clear Message Waiting Indicator
>PHONEBOOK
CALL LOG
If you subscribe to voice mail services provided by your
local telephone company, you will receive a text
message on the handset when you have new voice mail.
To manually remove the VOICE MAIL message on the
display:
>CLEAR MSG WAIT
DIAL TYPE
• Press MENU.
• Press the ^ or V button to highlight CLEAR MSG
TURN INDICATOR
OFF?
WAIT.
• Press SELECT.
• Press SELECT again to remove the message, or press
>CLEAR MSG WAIT
DIAL TYPE
OFF to exit and keep the message.
NOTE: This only turns off the displayed message on the handset, it
does not delete your voice mail message(s).
Dial Type
DIAL TYPE
TONE
At this menu you can choose Tone or Pulse dialing. The
factory default setting is TONE. Change this to PULSE
only if you do not have touch-tone dialing service.
Use the ^V buttons to select TONE or PULSE, then
press SELECT to save your preference.
16
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 17
Phonebook
Phone book
Memory capacity
The phone book directory can store up to 50 entries.
Each entry can contain a number up to 32 digits, and a
Pat Williams
555-1234
name up to 16 letters long. A convenient search feature
can help you find and dial numbers quickly (see page 19).
Timeouts and error messages
If you pause for too long while making an entry, the
procedure will time out and you will have to begin again.
If all memory locations are in use, the screen will
display PHONE BOOK IS FULL. You will not be
able to store a new number until you delete an existing
one.
17
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 18
Phonebook
AT&T
New phone book entries
To create a new phone book entry
Press MENU twice to select DIRECTORY. Press V to
highlight STORE. Press SELECT, then enter the
telephone number when prompted.
> PHONE BOOK
CALL LOG
Use the dial pad to enter up to 32 digits, then press
SELECT. You will be notified if the number is already in
your phone book.
To insert a number from your redial list, press REDIAL,
then ^V to find the number, then press SELECT.
• Press DELETE to erase numbers if you make a mistake.
> STORE
REVIEW
• Press and hold PAUSE to enter a 3-second dialing pause.
To enter a name
Press dial pad buttons once for the first letter, twice for
the second, three times for the third. Continue for
lower-case letters or numerals.
ENTER NUMBER
Press once to enter “A” (5 times for “a”).
Press twice to enter “B” (6 times for “b”).
Press 3 times to enter “C” (7 times for “c”).
Press 4 times to enter “2”.
555-1234_
2
ENTER NAME
Pat Williams_
The cursor moves to the right when you press another
dial pad button or the ^ button. Press V to move
the cursor to the left. Press 1 to enter a space, or
press twice to enter “1”.
• Press DELETE to erase letters if you make a mistake.
• Press * repeatedly to enter an asterisk (*),
question mark (?), exclamation point (!), slash (/) or
parentheses.
Pat Williams
555-1234
• Press # repeatedly to enter a pound sign (#),
apostrophe ('), comma (,) hyphen (-), period (.), or
ampersand (&).
Storing the entry
Press SELECT to store your new phone book entry. To
change it later, see page 20.
18
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 19
Phonebook
AT&T
Phone book search
Press PHONE BOOK to display the first listing in the
phone book. You can then use the ^ or V to
browse through the phone book, or search to find a
specific entry. Press OFF at any time to exit the phone
book.
Andrew
555-6789
To browse through the phone book
To browse, press ^ or V to scroll through all
entries one by one. Entries will be displayed
alphabetically by the first letter in the name.
Barbara
555-9876
To search by name
When any entry is displayed, you can press a dial pad
button to display the first name beginning with a letter
associated with that key.
5
Jennifer
555-4321
Press dial pad buttons once for the first letter, twice for
the second, three times for the third, as shown on the
previous page.
For example, press 5 (JKL) once to find Jennifer, twice
to find Kevin, or three times to find Linda.
7
Pat
555-1234
To call a displayed number
When you find the entry you want, press PHONE (or
SPEAKER) to dial. Or press SELECT to modify the entry
(see next page).
Viewing long numbers
The screen can display only 16 digits at a time. To view
numbers longer than this, press * or # to display
the remaining digits.
19
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 20
Phonebook
AT&T
To dial, delete or change entries
To dial a number
When any phone book entry is displayed, press PHONE
(or SPEAKER) to dial the displayed number.
Andrew
555-6789
To delete an entry
When any phone book entry is displayed, press DELETE
to delete the displayed entry from the phone book.
Once deleted, an entry cannot be recovered.
To change a listing
EDIT NUMBER
555-6789_
When any phone book entry is displayed, press SELECT
to modify the entry. (See page 18 for help in modifying
the name or number.)
Change the number as needed, then press SELECT.
Change the name as needed, then press SELECT to
save the modified entry.
EDIT NAME
Andy_
Andy
555-6789
20
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 21
Caller ID Logs
Caller ID Logs
How Caller ID works
If you subscribe to Caller ID service provided by your
local phone company, information about each caller will
be displayed after the first ring.
Pat Williams
1-888-883-2445
11/23 10:01AM
NEW
Caller’s name
Caller’s number
Time of call
Appears when
new call is
received
Pat Williams
1-888-883-2445
11/23 10:01AM
NEW
Date of call
Information about the last 50 incoming calls is stored in
your call log. You can review the call log to find out
who has called, return the call without dialing, or copy
the caller’s name and number into your phone book.
When the call log is full, the oldest entry is deleted to
make room for new incoming call information.
If you answer a call before the information appears on
the screen, it will not be saved in your call log.
About names
Names of callers will be displayed only if this information
is provided by your local telephone company.
If the telephone number of the person calling matches a
number in your phone book, the name that appears on
screen will match the name as you entered it into your
phone book.
(Example: If Christine Smith calls, her name will appear
as “Chris” if this is how you entered it into your phone
book.)
21
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 22
Caller ID Logs
AT&T
6 NEW CALLS
To review your call log
NEW
To review your call log
Press CID to review your call log. The most recent call
is displayed first. Use the arrow buttons to scroll
through the list as shown at left.
Pat Williams
555-1234
NEW 11/23 10:31AM
To return a call
Press PHONE (or SPEAKER) to call the number as
displayed.
To change the number before calling, press #
repeatedly to see a list of dialing options (you can
choose to dial with or without the area code), then
press PHONE (or SPEAKER) to place the call.
Chris Thompson
908-555-0100
NEW 11/23 10:21AM
Example:
CID..............................Number displayed as 908-555-0100
#
PHONE/
SPEAKER ..................Dials 555-0100
twice ....................Number changes to 555-0100 (drops “1” + area code)
Jeffrey Adams
555-9876
NEW 11/23 10:11AM
Other options
• Press DELETE to delete this entry from your call log.
• Press and hold DELETE to delete all entries from
your call log. When asked to confirm, press SELECT
to clear your call log of all entries, or OFF to exit
and leave all call log entries intact.
• Press SELECT to copy this entry into your phone
book. If the name or number is not provided, you
will be prompted to enter them.
22
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 23
Appendix
Screen icons, indicator lights & tones
Handset screen icons & alert tones
Screen icons
Speakerphone in use.
Ringer off.
HANDSET 1
Battery charging (animated display).
MUTE 11/23 10:01AM
NEW
Low battery (flashing); place handset in base to recharge.
MUTE
NEW
Microphone is muted.
New calls (press CID to review call log).
Alert tones
Happy
tone
Programming command completed successfully.
2 beeps
Programming error (or last record in list displayed).
Indicator lights
In Use
On when handset is in use. Flashes
when another phone is in use on the
same line.
Message Waiting
Flashes when you have new voice
mail (requires voice mail serice from
your local telephone company).
Charging
On when handset battery is charging.
Speaker
On when speakerphone is in use.
23
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 24
Appendix
Adding new handsets
Your telephone can accommodate up to four cordless handsets. You can add new
handsets (E560-1, sold separately) to the E5600/E5603B at any time, but each handset
must be registered with the base before use.
The handset provided with your E5600 is automatically registered as Handset 1.
Additional handsets will be assigned numbers in the order they are registered
(Handset 2, Handset 3, or Handset 4). You can register a maximum of 4 handsets.
The E5603B has 3 handsets automatically registered as Handset 1, 2 and 3. You can
register one additional handset , which will be assigned number 4.
Enter base ID, then press SELECT.
Before using a new E560-1 handset, you must register it
with the base. During registration, you must enter the
15-digit ID number of the telephone base. The Base ID
is located on the bottom of the base unit.
ENTER BASE ID
To add a new handset:
• Make sure your handset batteries are properly
installed and charged.
• Your handset will display “SEARCHING...”
HANDSET 2
• Press and hold the SELECT key until the handset
displays “ENTER BASE ID”.
• Enter the 15-digit Base ID number from the bottom
of the base unit.
• Press SELECT to accept the code and complete
registration.
NOTE: If an invalid Base ID code is entered you will hear an error tone
and the handset will continue to display “ENTER BASE ID”. To make
corrections while entering the code, you can erase digits by pressing the
DELETE key.
Handset 3
Handset 2
Handset 1
Once a valid base ID code is entered and accepted by
the base unit, the new handset will be assigned the next
available handset number (HS2, HS3, or HS4). You can
register a maximum of four handsets per base unit.
Handset 4
24
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 25
Appendix
Replacing a handset
If you are replacing a handset on a system that has the maximum number of registered
handsets (4) or wish to change the assigned handset number of your registered
handsets, you must first de-register the handsets, then re-register all handsets.
To de-register all handsets
• Unplug the power supply from the base unit.
• Remove all handsets from the charge cradles and base.
• Plug in the power supply while pressing and holding the HANDSET LOCATOR
button.
• Continue pressing HANDSET LOCATOR until the IN USE, CHARGING and
MESSAGE WAITING indicators are lit. (this could take up to 10 seconds).
• Release the HANDSET LOCATOR button.
• All handsets will display:
ENTER BASE ID
Once the base indicators turn off (up to 30 seconds), the handsets have been
de-registered from the base, and can now be re-registered (see page 26).
25
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 26
Appendix
Re-Registering a handset
You can re-register handsets after de-registering from the base.
Or you can re-register handsets to a new base unit, if you have replaced your base unit
for any reason.
To re-register a handset:
• Make sure your handset batteries are properly installed and charged.
• Your handset will display “SEARCHING...”
• Press and hold the SELECT key until the handset displays “ENTER BASE ID”.
• Enter the 15 digit Base ID number from the bottom of the base unit.
• Press SELECT to accept the new code and complete re-registration.
To re-register a handset to a new base unit:
• Make sure your handset batteries are properly installed and charged.
• Unplug the old base unit.
• Install the new base unit by plugging it into the electrical outlet and phone jack
• Your handset will display “SEARCHING...”
• Press and hold the SELECT key until the handset displays “ENTER BASE ID”.
• Enter the new15-digit Base ID number from the bottom of the new base unit.
• Press SELECT to accept the new code and complete re-registration.
NOTE: If an invalid base ID code is entered you will hear an error tone and the handset will continue to display
“ENTER BASE ID”. To make corrections while entering the code, you can erase digits by pressing the DELETE
key.
Once a valid base ID code is entered and accepted by the base unit, the new handset
will be assigned the next available handset number. You can register a maximum of
four handsets per base unit.
26
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 27
Appendix
In case of difficulty
If you have difficulty with your phone, please try the suggestions below. For Customer
•
•
Make sure battery is installed and charged correctly (see page 8).
Telephone does
not work at all
Make sure the AC adapter is plugged into an outlet not controlled by
a wall switch.
•
•
•
Make sure the telephone line cord is plugged firmly into the base unit
and the modular jack.
If you have dial-pulse telephone service, make sure the dial mode is
set to Pulse (see page 16).
If these suggestions do not work, unplug the base, remove and re-
insert the battery, then place the handset in the base to re-initialize.
•
•
Make sure the ringer is on (see page 15).
Phone does not
ring
Make sure the telephone line cord and AC adapter are plugged in
properly (see page 7).
•
•
Move the handset closer to the base.
You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
•
•
You may be out of range. Move closer to the base.
If you hear
noise or
interference
during a call
Appliances plugged into the same circuit as the base can cause
interference. Try moving the appliance or base to another outlet.
•
•
•
The layout of your home or office might be limiting the operating
range. Try moving the base to another location, preferably on an
upper floor.
Disconnect the base from the modular jack and plug in a corded
telephone. If calls are still not clear, the problem is probably in your
wiring or local service. Call your local telephone service company.
Do you have DSL service? If so, you need to have a DSL filter
installed at every phone jack that has a phone connected to it.
Contact your DSL service provider for filter information.
•
•
The base unit may have lost power. Make sure the base unit is
plugged into the power source.
Handset
displays
"Charging…." ,
and buttons do
not respond
Place the handset in the base unit (or Charge Cradle of E560-1), wait
4 minutes. The handset will return to "Searching" mode and link with
the base unit.
•
If this does not happen, remove the handset battery for at least 3
seconds, then replace it. The handset will return to "Searching" mode
and link with the base unit.
27
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 28
Appendix
Technical specifications
RF Frequency Band
(Handset to base)
2400 MHz — 2483.5 MHz
RF Frequency Band
(Base to handset)
5740 MHz — 5830 MHz
Channels
95
Channel Spacing
Output Power
Sensitivity
864 KHz
Handset : 17~21 dBm
Base Unit: 26~32 dBm
-96 dBm
Modulation
GFSK
Operating Temperature
32°F — 122°F
0°C — 50°C
Base Unit Voltage
(AC Voltage, 60Hz)
96 — 130 Vrms
Base Unit Voltage
(AC Adapter Output)
9VDC @400mA
Handset Voltage
3.2 — 4.7 VDC @750 mA
Replacement Battery
Model 2420 (SKU 00578)
3.6V 700mAh
28
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 29
Appendix
Index
A
M
AC adapter, 7
Making calls, 11
Menus, 2
Messages, 3
Mute, 12
Adding new handsets, 24
Alert tones, 23
Answering calls, 11
B
N
Battery charging, 8
Battery installation, 8
Belt clip, 10
Names,
enter into phone book, 18
search for, 19
C
O
Caller ID, 21
Operating range, 6
add entries to phone directory, 22
delete entries, 22
dial entries, 22
P
Phone book, 17
dial number, 20
edit entries, 20
name search, 19
new entries, 18
Problems, 27
CID, 21
D
Delete Call Log entries, 22
Delete redial entries, 11
Dialing,
Q
from a CID record, 22
manual dialing, 11
phone book dialing, 20
Quick reference guide, 2-3
R
E
Receiving calls, 11
Recharging, 8
Redial, 11
Elapsed time, 11
Ending calls, 11
Replacing a handset, 25
Re-registering a handset, 26
Ring silencing, 12
Ring tone options, 15
F
Flash (switchhook flash), 12
H
S
Hands-free use, 11
Handset locator, 11
Headset, 10
Search for name, 19
Speakerphone, 11
Switchhook flash, 12
I
T
Incoming call log, 21
Incoming calls, answering, 11
Indicator lights, 23
Technical specifications, 28
Troubleshooting, 27
L
V
Last number redial, 11
Low battery, 8
Volume controls, 12
29
91-000461-010-000-E5603B manual July0105.qxd 2/13/1950 7:21 PM Page 30
Copyright © 2005 Advanced American Telephones. All Rights Reserved.
AT&T and the Globe Design are trademarks of AT&T Corp.,
licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 06/05.
91-000461-010-000
|