AT T DECT TL91278 User Manual

User’s manual

TL91178/TL91�78/TL91�78

DECT 6.0 cordless

telephone with BLUETOOTH®

wireless technology

Parts checklist

Your telephone package contains the following items.

User’s manual

Quick start guide

TL91178/TL91�78/TL91�78

DECT 6.0 cordless

TL91178/TL91�78/TL91�78

DECT 6.0 cordless

telephone with BLUETOOTH®

wireless technology

telephone with BLUETOOTH®

wireless technology

User's manual

Quick start guide

Cordless handset

(1 for TL91178)

(2 for TL91278)

(3 for TL91378)

Telephone base

Charger for cordless handset

with power adapter installed

(1 for TL91278)

Battery for cordless handset

(1 for TL91178)

Battery compartment cover

(1 for TL91178)

(2 for TL91278)

(2 for TL91378)

(3 for TL91378)

Power adapter for

telephone base

Telephone line cord

Wall mount bracket

User’s manual

TL91178/TL91�78/TL91�78

DECT 6.0 cordless

telephone with Bluetooth®

wireless technology

Table of contents

Intercom...............................................37

Call transfer using intercom......39

Getting started

Quick reference guide

handset............................................1

telephone base............................3

Handset status icons.......................4

Installation............................................5

Telephone base installation.........7

Charger installation..........................8

Battery installation &

Directory

About the directory........................41

Creating directory entries...........42

Directory review...............................44

Directory search...............................45

To dial, delete or

edit entries...................................46

charging...........................................9

Installation options...............................11

Caller ID

Caller ID operation..........................48

To review the caller ID

history..............................................53

Bluetooth

Introducing Bluetooth...................16

Glossary of terms............................17

Bluetooth setup...............................18

Appendix A,

Alert tones & lights........................55

Appendix B,

Handset display screen

Handset settings

Handset main menu.......................21

messages......................................56

Appendix C,

Expansion handset...............................59

Adding & registering handsets.....60

Replacing a handset............................61

Handset settings..............................22

Telephone operation

Handset operation..........................27

Options while on calls..................33

Chain dialing......................................36

Table of contents

Appendix D,

Troubleshooting...............................62

Appendix E,

Maintenance.......................................72

Appendix F,

Important safety information....73

Appendix G,

FCC Part 68 and ACTA..................76

Appendix H,

FCC Part 15........................................78

Appendix I,

Limited warranty..............................79

Appendix J,

Technical specifications...............82

Index...................................................84

Getting started

Quick reference guide � handset

CHARGE indicator

MENU/SELECT

On when the handset is

charging in the telephone base

or charger.

Press to show the menu.

While in the menu, press to

select an item or save an entry

or setting.

DIR /

CID

Press

DIR to show directory

DELETE/MUTE

entries (page 44).

Press to scroll up while in

menus.

While entering names or

numbers, press to move the

cursor to the right.

Press to increase the listening

volume when on a call.

During a call, press to mute

microphone (page 34).

While reviewing the caller ID

history, the directory or the

redial memory, press to delete

an individual entry

(page 54, page 46 and page 31

respectively).

While predialing, press to delete

digits (page 27).

Press

history (page 53).

CID to show caller ID

Press to scroll down while in

menus.

OFF/CLEAR

While entering names or

numbers, press to move the

cursor to the left.

Press to decrease the listening

volume when on a call.

During a HOME or CELLULAR

line call, press to end the call.

While in a menu, press to

cancel an operation, back up to

the previous menu, or exit the

menu display.

REDIAL/PAUSE

Press repeatedly to view the

last five numbers dialed

(page 31).

While entering numbers, press

and hold to insert a dialing

pause (pages 42 and 46).

CELLULAR

Press to make or answer a

CELLULAR call.

Flashes rapidly when there is an

incoming CELLULAR call.

Flashes slowly when a

CELLULAR call is on hold.

During a CELLULAR call, press

to receive an incoming call if

call waiting is activated

(page 30).

HOME/FLASH

Press to make or answer a

HOME call.

Flashes rapidly when there is

an incoming HOME call.

Flashes slowly when a HOME

call is on hold.

During a HOME call, press to

receive an incoming call if call

waiting is activated (page 27).

SPEAKER

HOLD

Press to turn on the

handset speakerphone.

Press again to resume

normal handset use

(page 31).

Press to put the HOME or

CELLULAR call on hold

(page 35).

Getting started

Quick reference guide � handset

Feature menu

The > symbol highlights a

menu item.

Feature menu

>DIRECTORY

DIRECTORY (page 41)

CALL LOG (page 48)

CALL LOG

INTERCOM (page 37) - This feature is not available on model TL91178.

RINGER VOLUME (page 22)

RINGER TONE (page 23)

KEY TONE (page 24)

LANGUAGE (page 24)

CLR VOICEMAIL (page 25)

HOME AREA CODE (page 26)

Using menus

Press MENU/SELECT to show the main menu.

Press

to scroll through menu items.

Press MENU/SELECT to select or save changes to a highlighted menu

item.

Press

OFF/CLEAR to cancel an operation, back up to the previous

menu, or exit the menu display.

Getting started

Quick reference guide � telephone base

VOICEMAIL indicator

Bluetooth

Flashes when you have

new voicemail on your

HOME line (offered by

your telephone company,

and is different from

answering system

messages). The indicator

does not support

voicemail on your

CELLULAR line.

•

Press and hold to

enable the Bluetooth

feature on the

telephone base

(page 18).

•

On when the

telephone base is

paired and connected

with a cellular phone.

Flashes when the

Bluetooth feature is

activated and waiting

for pairing and

IN USE indicator

•

On when the handset

is in use, or when

you are registering a

handset.

connection.

•

Flashes when another

telephone is in use on

the same line, or when

you are deregistering

handsets from the

HANDSET LOCATOR

Press to make handsets

beep so you can locate

them (page 32).

telephone base.

•

Flashes quickly when

there is an incoming

call.

Getting started

Handset status icons

HANDSET 1

25 MISSED CALLS

NEW

MUTE

10:21^AM

11/23

HOME line - on steady when the HOME line is in use.

CELLULAR line - on steady when the CELLULAR line is in use.

BLUETOOTH - on steady when a cellular phone is connected with

the telephone base.

NEW VOICEMAIL - new voicemail received on your HOME line.

SPEAKERPHONE - the speakerphone is in use.

Ringer off - the handset ringer is turned off.

Battery status - battery is charging (animated display).

Battery status - low battery (flashing); place handset in telephone

base or charger to recharge.

Microphone is muted.

MUTE

NEW

Missed and unreviewed calls.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks

by Advanced American Telephones and its parent, VTech Holdings Limited, is under license. VTech

Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of

their respective owners.

Getting started

Installation

You must install and charge

the handset battery before

using the cordless handset.

See pages 9-10 for easy

instructions.

STOP!

Install the telephone base close to a telephone jack and a power outlet not

controlled by a wall switch. The telephone base can be placed on a flat surface

or vertically mounted on the wall (see pages 11-13). For optimum range and

better reception, place the telephone base in a central and open location.

You may hear interference if your cellular phone is too close to the telephone

base during a CELLULAR call. Make sure that your Bluetooth enabled cellular

phone is between one to 12 feet away from the telephone base in order

to maintain a clear and consistent connection between your Bluetooth cell

phone, telephone base and cell tower.

If you subscribe to high-speed Internet service (digital subscriber line - DSL)

through your telephone line, you must install a DSL filter between the telephone

base and the telephone wall jack (see the following page). The filter prevents

noise and caller ID problems caused by DSL interference. Please contact your

DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset or

telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) ��-�111. In Canada, dial

1 (866) �88-4�68.

Getting started

Installation

Avoid placing the telephone base too close to:

• Communication devices such as: television sets, VCRs, or other cordless

telephones.

• Excessive heat sources.

• Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

• Excessive dust sources such as a workshop or garage.

• Excessive moisture.

• Extremely low temperature.

• Mechanical vibration or shock such as on top of the washing machine or

workbench.

Getting started

Telephone base installation

Install the telephone base as shown below. Make sure that the electrical outlet

is not controlled by a wall switch.

The telephone base is set for desktop use. If you want to change to the wall

mounting position, install the supplied wall mount bracket to the telephone base.

See pages 11-13 for details.

�. Route the power cord through the

slot next to the telephone jack.

1. Plug the small

end of the power

adapter into the

power jack at

�. Plug one end of

the bottom of

the telephone

base.

the telephone

line cord into the

telephone jack at

the bottom of the

telephone base.

7. Raise the antenna.

4. Place the cords

into the channels.

Telephone

line cord

5. Plug the other

end of the

telephone line

cord into a

telephone jack

or a DSL filter.

Power

adapter

DSL filter (not included),

required if you have DSL

high-speed Internet service.

6. Plug the large end of the

power adapter into a power

outlet not controlled by a

wall switch.

Getting started

Charger installation

Plug the power adapter

into an electrical outlet not

controlled by a wall switch.

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com, or call

1 (800) ��-�111. In Canada, dial 1 (866) �88-4�68.

2. The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Getting started

Battery installation & charging

Install the battery as shown on the next page. Once you have installed the

battery, the screen indicates the battery status (see table below). If necessary,

place the handset in the telephone base or charger to charge the battery.

For best performance, keep the handset in the charger when not in use. The

battery is fully charged after 16 hours of continuous charging. See the table

on page 82 for battery operating times.

If the screen is blank, you need to charge the handset without interruption for

at least 10 minutes to give the handset enough charge to use the telephone

for a short time. The screen shows LOW BATTERY and the backlight is off

until you have charged the battery without interruption for at least one hour.

The following table summarizes the battery charge indicators and actions

to take.

Battery indicators

Battery status

Action

The screen is blank.

Battery has no charge

and the handset

cannot be used.

Charge without

interruption until the

screen shows LOW

BATTERY (at least 10

minutes).

The screen shows

PLACE IN CHARGER

and flashes.

Battery has very little

charge and the handset interruption until the

cannot be used.

Charge without

screen shows LOW

BATTERY (at least four

minutes).

The screen shows

LOW BATTERY and

flashes.

Battery has enough

charge to be used for a interruption until the

short time.

Charge without

screen shows HANDSET

X (at least one hour).

The screen shows

HANDSET X.

Battery is charged.

To keep the battery

charged, place it in

the telephone base or

charger when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short beeps

every minute.

Getting started

Battery installation & charging

Step 1

Step 2

Step 3

Press the depression

and slide the battery

compartment cover

downwards (if

Plug the battery securely

into the connector inside

the handset battery

compartment, matching

the color-coded label.

Insert the supplied battery

with the label THIS SIDE

UP facing up as indicated.

Align the cover flat

against the battery

compartment

cover, then slide

it upwards until it

clicks into place.

necessary).

Step 4

Charge the handset by placing it face up in the

telephone base or charger. The CHARGE light will

be on when charging.

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery (model BT8001). To

order, visit our website at www.telephones.att.com or call 1 (800) ��-

�111. In Canada, dial 1 (866) �88-4�68.

Getting started

Installation options

The telephone base is set for desktop use. It is possible to change to a

wall mounting position by installing the wall mount bracket provided. Wall

mounting requires a telephone outlet wall mounting plate with mounting

studs that may require professional installation. You can purchase the

mounting plate from many hardware or consumer electronics retailers.

Desktop to wall mount installation

To change the telephone base to the wall mount position, make sure that

you first unplug the telephone line cord and power adapter cord from the

wall outlets before you begin. In addition, to prevent possible damage,

remove the handset from the telephone base.

1. Position the telephone base as shown below, and insert the extended tabs of

the bracket into the slots under the telephone base.

2. Push the telephone base down until it clicks into place on both sides of the

bracket.

Getting started

Installation options

Desktop to wall mount installation

3. Bundle the telephone line cord and power adapter cord, and secure them with

a twist tie before placing them behind the telephone base as shown below.

4. Align the holes on the bracket with the standard wall plate and slide the

bracket until the telephone is secured as shown below. Plug the telephone

line cord into a telephone wall jack. Plug the power adapter into a power

outlet not controlled by a wall switch.

DSL filter (not included),

required if you have DSL

high-speed Internet service.

Getting started

Installation options

Desktop to wall mount installation

5. Make sure the telephone is securely positioned as shown below.

Getting started

Installation options

Wall mount to desktop installation

To change the telephone base to the desktop position, make sure that you first

unplug the telephone line cord and power adapter cord from the wall outlets

before you begin. In addition, to prevent possible damage, remove the handset

from the telephone base.

1. Remove the telephone base from the wall and untie the bundled telephone

line cord and power adapter cord.

2. Press on the catches on both sides of the bracket (indicated by arrows below)

to unlock the telephone base from the bracket.

The catch on each side of

the telephone base.

3. Pull the telephone base up to detach it from the bracket.

Getting started

Installation options

4. Plug the telephone line cord into a telephone wall jack, and plug the power

adapter cord into a power outlet not controlled by a wall switch. Route the

cords through the channels.

Telephone

line cord

Power outlet not

controlled by a wall

switch.

Power

DSL filter (not included),

adapter

required if you have DSL

high-speed Internet service.

Bluetooth

Introducing Bluetooth

Your new AT&T TL91178�TL91278�TL91378 telephone system with Bluetooth

wireless technology has the following features:

• Pair a Bluetooth enabled cell phone with the telephone base.

• Connect a cell phone to make and receive CELLULAR calls. Only one cell

phone can be paired and connected on a call at a time.

• Make and receive calls using your cell phone plan while benefiting from the

ease and comfort of your home telephone system.

IMPORTANT INFORMATION

• Refer to your cell phone user's manual for more information about its

Bluetooth function.

• Make sure that your Bluetooth enabled cellular phone is between one to

12 feet away from the telephone base to maintain a clear and consistent

connection between your Bluetooth cell phone, telephone base and cell

tower.

• Make sure that your cellular phone has sufficient signal strength. You may

need to move the cellular phone and telephone base to a location where

the cellular signal may be stronger.

• Charge your Bluetooth cell phone while it is connected to the telephone

base because your cell phone's battery will discharge faster while it is

connected wirelessly to the telephone base.

• Monitor your cell phone's usage because airtime is deducted from your

cellular plan for the duration of the CELLULAR calls.

Refer to the Bluetooth setup section (pages 18-20) to learn how to set up

your Bluetooth device. Refer to the Handset operation section

(pages 27-35) to learn how to operate your Bluetooth devices with your new

AT&T telephone system with Bluetooth wireless technology. Refer to the

Troubleshooting section (pages 62-71) if you experience difficulty when using

the telephone system.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced

American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of

Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

Bluetooth

Glossary of terms

Below are some terms used in this user’s manual to help you become familiar

with using your Bluetooth devices and your new AT&T telephone system.

Bluetooth cell phone - Refers to a mobile Bluetooth enabled cellular phone.

CELLULAR line - The communications service provided through your

Bluetooth enabled cellular telephone.

HOME line - Your conventional telephone land line.

Connected - You can only use a Bluetooth device when it is connected to the

telephone base.

Paired devices - Once you have paired a Bluetooth device with the telephone

base, it is identified as registered to the telephone base. Only one Bluetooth

cellular phone can be paired with the telephone base.

Pairing - This refers to the process of two Bluetooth devices registering

device information with each other. The telephone base must be paired with a

Bluetooth cellular phone before you can use the Bluetooth device. Depending

on the manufacturer, this process is also referred to as bonding.

PIN - By default, the PIN is 0000 for the telephone base and for most

Bluetooth devices. PIN information must be exchanged between Bluetooth

devices before you can use them. The PIN is also known as a passkey

or passcode.

Bluetooth

Bluetooth setup

NOTE: You can only

To use a Bluetooth-enabled cellular phone with

your telephone, you must first pair and connect

your Bluetooth cellular phone with the telephone

base.

pair one Bluetooth

cell phone with the

telephone base at a

time.

Pairing a device

Before you begin, make sure that your Bluetooth-

enabled cellular phone is not connected to any

other Bluetooth device. Refer to your cellular

phone user's manual to learn how to search for or

add new Bluetooth devices.

To pair and connect a cellular phone:

1. Press and hold the Bluetooth button on the

telephone base until it is flashing. The Bluetooth

feature will be activated.

2. Using your cellular phone, turn on the Bluetooth

feature and search for a new device.

3. Once your cellular phone has found the AT&T

DECT 6.0 telephone base, select it.

4. Using your cellular phone, enter the PIN of the

telephone base (the default PIN is 0000) to

continue the pairing process.

HANDSET 1

When a device is successfully connected, the

status icon will display on the cordless handset

screen, and the light of the Bluetooth button on

the telephone base will be on steadily.

Auto connection

Once you have paired a device with the

telephone base, the pairing information is stored

in the telephone base. If the paired device

becomes disconnected, the telephone base will

automatically search and re-connect to that device.

If the connection does not resume in a minute, you

will need to re-connect to that device manually,

refer to the section below for details.

Bluetooth

Bluetooth setup

Manual connection

To manually re-connect a paired device, make

sure the Bluetooth feature is turned on in your

cellular phone, select AT&T DECT 6.0 from the

paired device list in your cellular phone. Once the

connection is established again, the Bluetooth

button on the telephone base will turn back on.

Turning off the auto connection

If you do not want the telephone base to re-

connect to a paired device automatically after

it is disconnected, you can turn off the auto

connection feature manually. In order to turn off

the auto connection, you will need to initiate a

disconnection from the paired cellular phone; this

will transmit a signal to the telephone base and

disable the auto connection.

While the cellular phone is connected to the

telephone base, find the cellular phone’s Bluetooth

device list and select AT&T DECT 6.0 to manually

disconnect the device. (If disconnection is not an

option on your cellular phone, you may need to

disable Bluetooth or unpair the telephone base.)

Refer to your cellular phone’s user’s manual for

instructions. The telephone base will not search

and re-connect to this cellular phone until this

feature is activated again.

Bluetooth

Bluetooth setup

To resume the auto connection

NOTE: If the connection

between the paired

To resume the auto connection between the

paired device and the telephone base, you will

need to connect the device manually. Make sure

the Bluetooth feature is turned on in your cellular

phone. Select AT&T DECT 6.0 from the paired

device list in your cellular phone to reconnect.

If the connection is successfully resumed, the

status icon will display on the cordless handset

screen, and the light of the Bluetooth button on

the telephone base will be on steadily.

device and the telephone

base does not resume by

manually connecting the

device on the paired

device list, you will need

to unpair or deregister

the device from the

cellular phone. Make

sure the device is no

longer on the paired list

after deregistration; then

follow the steps in

Replace a paired device

Pairing a device on

page 18 to start the

pairing procedures again.

If you want to pair and connect a new device when

there is already a device paired with the telephone

base, press and hold the Bluetooth button on the

telephone base until it is flashing, then start with

step two of Pairing a device on page 18. If you

do not pair a new device within two minutes, the

Bluetooth light on the telephone base will turn off

and the system will return to idle mode.

Handset settings

Handset main menu

To enter the main menu:

1. Press MENU/SELECT when the handset is in idle mode.

2. Press

DIR /

CID to select a handset feature menu, then press

MENU/SELECT to enter that menu.

To return to the idle mode, press and hold OFF/CLEAR.

CLR VOICEMAIL allows

you to turn off the new

voicemail indication

(page 25).

DIRECTORY allows you

to store and search for

names and numbers

(page 44).

CALL LOG allows you

to view caller ID history

(page 53).

>DIRECTORY

CALL LOG

CLR VOICEMAIL

>CALL LOG

INTERCOM

HOME AREA CODE

allows you to set your

home area code

(page 26).

INTERCOM allows you

to intercom with other

handsets (pages 37-38). tones on or off

(page 24).

KEY TONE allows you

to turn the keypad

>KEY TONE

>INTERCOM

>HOME AREA CODE

LANGUAGE

Directory

About the directory

Shared directory

The directory is stored in the telephone base, and

is shared by all handsets. Changes made to the

directory on any one handset applies to all.

Robert Brown

888-883-2445

NOTE: Only one handset can review the directory at a

time. If another handset attempts to enter the directory,

the screen shows NOT AVAILABLE AT THIS TIME.

Capacity

The directory can store up to 50 entries, with a

maximum of 15 alphanumeric characters (including

spaces) for the names and 30 digits for the

telephone numbers. A convenient search feature

can help you find and dial numbers quickly

(page 45).

If there are already 50 entries, the screen shows

LIST FULL. You can not store a new number until

you delete one.

Exiting the directory

Press OFF/CLEAR to cancel an operation, back

up to the previous menu, or exit the menu display.

Press and hold OFF/CLEAR to return to the idle

mode.

If you pause for too long while creating or

reviewing an entry, the procedure times out and

you will have to begin again.

Directory

Creating directory entries

To create a new directory entry

1. Press MENU/SELECT when in idle mode to enter

>DIRECTORY

CALL LOG

the feature menu.

2. Press MENU/SELECT again to enter

>DIRECTORY menu.

3. Press

DIR or

CID to highlight STORE.

>REVIEW

STORE

4. Press MENU/SELECT.

5. Enter the telephone number when prompted.

• Use the dial pad to enter up to 30 digits.

>STORE

REVIEW

– Press

DIR /

CID to move the

cursor to the right or left.

– Press DELETE/MUTE to erase digits.

– Press and hold DELETE/MUTE to erase all

ENTER NUMBER

888-883-2445_

digits.

– Press and hold REDIAL/PAUSE to enter a

three-second dialing pause.

-OR-

• Copy a number from redial by pressing

REDIAL/PAUSE then press DIR or

CID,

or pressing REDIAL/PAUSE repeatedly to

locate the number to copy. Press

MENU/SELECT to copy the number.

6. Press MENU/SELECT to save the number in the

display.

The display shows ALREADY SAVED if the

number is already in the directory. You cannot

save the same number twice.

Directory

Creating directory entries

7. Enter the name when prompted.

ENTER NAME

• Use the dial pad to enter a name (up to

15 characters). Each time you press a key, the

character on that key appears. Additional key

presses produce other characters on that key.

See the chart below.

Robert Brown_

– Press

DIR or

CID to move the

cursor to the right or left.

NOTE: The first letter

of every word is

capitalized. The

remaining letters in a

word begin with

lower case letters

shown in the chart to

the right.

– Press DELETE/MUTE to erase letters.

– Press and hold DELETE/MUTE to erase all

letters.

Characters by number of key presses

Dial

key

‘

(

)

space

8. Press MENU/SELECT to store your new directory

entry. The name and the telephone number will

then be shown on the screen. To change them

later, see pages 46-47.

Robert Brown

888-883-2445

Directory

Directory review

DIR

To review directory entries

1. Press

DIR when in idle mode to show the

first entry in the directory. DIRECTORY EMPTY

appears if there are no directory entries.

-OR-

You can also show the first entry in the

directory by pressing MENU/SELECT twice,

then pressing MENU/SELECT again to choose

>REVIEW.

2. Press

DIR or

CID to browse through

the directory. Entries appear alphabetically by

the first letter in the name.

Directory

Directory search

To search by name

DIR

1. Press

DIR when in idle mode to show the

first listing in the directory. DIRECTORY EMPTY

appears if there are no directory entries.

2. When a name entry appears, press the dial pad

keys (2-9) to start a name search.

The directory shows the first name beginning

with the first letter associated with the dial pad

key if there is an entry in the directory that

begins with that letter.

3. To see other names that start with the letters

on the same dial pad key, keep pressing the

key. The names appear in alphabetical order.

For example, if you have the names Jennifer,

Jessie, Kevin and Linda in your directory:

• If you press 5 (JKL) once, you will see Jennifer.

• If you press 5 (JKL) twice, you will see Jessie.

• If you press 5 (JKL) three times, you will see

Kevin.

• If you press 5 (JKL) four times, you will see

Linda.

• If you press 5 (JKL) five times, you will see

Jennifer again.

NOTES:

1. If there is no name matching the first letter of the key you

press, the directory shows a name that matches the following

letters of the key.

2. If you press a key (2-9) and no name starts with the letters

on that key, the directory shows the entry that matches the

next letter in the directory.

Directory

To dial, delete or edit entries

To dial, delete or edit a directory entry (name and

number), the entry must show on the handset.

Use the directory review or search (pages 44-45)

to show an entry.

Display dial

To dial a displayed number from the directory,

press HOME/FLASH or SPEAKER to dial from

the HOME line; or press

CELLULAR to dial from

the CELLULAR line.

To delete an entry

When a directory entry displays, press

DELETE/MUTE to delete the displayed entry from

the directory. Once deleted, you cannot retrieve

an entry.

To edit an entry

When a directory entry displays:

1. Press MENU/SELECT to modify the entry. You

are prompted to EDIT NUMBER.

Andrew

888-490-2005

• Press the dial pad keys to add digits.

• Press DELETE/MUTE to erase digits.

• Press

DIR or

CID to move the cursor

to the right or left.

EDIT NUMBER

888-883-2445

• Press and hold REDIAL/PAUSE to add a three-

second pause, if desired.

• Copy a number from redial by pressing

REDIAL/PAUSE. Then press

DIR or

CID,

or press REDIAL/PAUSE repeatedly to

locate the number to copy. Press

MENU/ SELECT to copy the number.

Directory

2. Press MENU/SELECT. You will be prompted to

EDIT NAME.

EDIT NAME

Andy

• Press the dial pad keys to add characters

(page 43).

• Press DELETE/MUTE to erase characters.

• Press

to the right or left.

DIR or

CID to move the cursor

Andy

888-883-2445

3. Press MENU/SELECT to confirm.

Caller ID

Caller ID operation

This product supports caller ID services provided

by most local telephone service companies.

Depending on your service subscription, you may

see the caller’s number, or the caller’s name and

number that are sent by the telephone company

after the first or second ring. If you also have call

waiting service, this caller ID information shows

when you receive a call while you are on another

call.

CHRISTINE SMITH

888-722-7702

NEW

10:01^AM11/23

Caller ID from the HOME line allows you to see

the name, number, date and time of the incoming

call. However, caller ID from the CELLULAR line

only shows the number of the incoming call and

the Bluetooth name of the paired device; date

and time of the call are not shown.

These services are available only if both you and

the caller are in areas offering caller ID service,

and if both telephone companies use compatible

equipment.

Contact your local telephone company and

cellular service provider if:

• You have both caller ID and call waiting, but as

separate services (you may need to combine

these services).

• You have only caller ID service, or only call

waiting service.

• You don’t subscribe to any caller ID or call

waiting services.

You can use this product with regular caller ID

service, or without subscribing to either caller ID

or combined caller ID with call waiting service.

Caller ID

Caller ID operation

Caller ID history information

If you subscribe to caller ID services, provided by

your local telephone company and�or cellular

service provider, the caller ID history stores

information for about the last 50 incoming calls

for both the HOME and CELLULAR lines.

CHRISTINE SMITH

888-722-7702

NEW

10:01^AM

11/23

Although the caller ID history records the caller

ID information of both lines, caller ID entries from

the CELLULAR line only provide the incoming

telephone number and the Bluetooth name of

the cellular phone. If the number on the incoming

CELLULAR call matches a number in the directory,

the name is retrieved from the matched directory

entry. However, if the caller's number is not

provided from the CELLULAR line, the screen

only shows INCOMING CALL without showing the

Bluetooth name of the device.

Review the caller ID history to find out who called,

to easily return the call, or to copy the caller’s

name and number into your directory.

The phone deletes the oldest entry when the log

is full to make room for new calls.

If you answer a call before the information

appears on the screen, it is not saved in the caller

ID history.

The caller ID history is stored in the telephone

base, and is shared by all handsets. Changes made

on any one handset is reflected in all.

NOTE: Only one handset can review the caller ID history

at a time. If another handset attempts to enter the

directory or caller ID history, it shows NOT AVAILABLE

AT THIS TIME.

Caller ID

Caller ID operation

Caller’s name

Caller’s number

Appears when the

call is missed and

unreviewed

CHRISTINE SMITH

Incoming

HOME call

888-722-7702

NEW

Incoming

10:01^AM

11/23

CELLULAR call

Date of call

Time of call

Memory match

If the incoming telephone number exactly matches

a telephone number in your directory, the name that

appears on the screen matches the corresponding

name in your directory.

For example, if Christine Smith calls, her name

appears as Chris if this is how you entered it into

your directory.

Chris

888-722-7702

NEW

10:01^AM11/23

NOTE: The number shown by your caller ID is in the

format sent by the phone company. The phone company

usually delivers ten-digit phone numbers (area code plus

phone number). If the telephone number of the caller

does not exactly match a number in your directory, the

name appears as it is delivered by the phone company.

For example, if the phone company includes the area

code and the directory number does not, the name

appears as delivered by the phone company.

Caller ID

Caller ID operation

There are also occasions when other information

or no information shows for various reasons:

On-screen

message

Reason

Caller's name and telephone

number are not revealed at

caller's request.

PRIVATE

CALLER

The caller's name has been set

as private.

PRIVATE

NAME

The caller's number has been set

as private.

PRIVATE

NUMBER

Your local telephone company is

unable to determine the caller's

name and telephone number.

Calls from other countries may

also generate this message.

UNKNOWN

CALLER

Your local telephone company is

unable to determine the caller's

name.

UNKNOWN

NAME

Your local telephone company is

unable to determine the caller's

number.

UNKNOWN

NUMBER

Caller ID

Caller ID operation

Missed (new) calls indicator

When a handset is in idle mode and has calls that

have not been reviewed, its screen will show XX

MISSED CALLS.

HANDSET 1

6 MISSED CALLS

All entries that have not been reviewed are counted

as missed calls when the phone is idle. Each time

an entry in the caller ID history marked NEW is

reviewed, the number of missed calls decreases by

one.

Robert Brown

888-883-2445

NEW

10:31^AM

11/23

If you have too many missed calls and you do not

want to review them one by one, but you still want

to keep them in the caller ID history, you can press

and hold OFF/CLEAR for four seconds when the

handset is idle. All the entries in the caller ID history

will be considered old (have been reviewed), and the

missed calls counter is reset to 0.

Caller ID

To review the caller ID history

HANDSET 1

6 MISSED CALLS

To review the caller ID history

1. Press

CID to review the caller ID history in

reverse chronological order starting with the

most recent call.

-OR-

You can also review the caller ID history by

pressing MENU/SELECT, and using

CID to scroll to >CALL LOG, then press

MENU/SELECT.

DIR or

CID

Robert Brown

888-883-2445

2. Press

DIR or

CID to scroll through the

NEW

list as shown on the left.

10:31^AM

11/23

Charlie Johnson

800-222-3111

To dial from the caller ID history

NEW

To dial a displayed number from the caller ID

history:

10:21^AM

11/23

• Press HOME/FLASH or SPEAKER to dial

from the HOME line, or press

CELLULAR to

dial from the CELLULAR line.

-OR-

• Press # repeatedly to show different dialing

options for local and long distance numbers

before dialing or saving the telephone number

in the directory. See the example on the left.

The various dialing options are:

883-2445

1-883-2445

888-883-2445

Press #

1-888-883-2445

You may also press 1 repeatedly to add or

remove a 1 in front of the telephone number

before dialing or saving the telephone number

in the directory. See the examples on the left.

883-2445

1-883-2445

Press 1

When the number shown is in the correct

format for dialing, following the above step to

dial the number.

888-883-2445

1-888-883-2445

Caller ID

To review the caller ID history

Other options

• Press DELETE/MUTE to delete the shown entry

from the caller ID history.

• When an entry from the caller ID history is

shown, press and hold DELETE/MUTE to delete

all entries from the caller ID history. When

the screen shows DELETE ALL CALLS? press

MENU/SELECT to clear the caller ID history of

all entries, or press OFF/CLEAR to exit and

leave all entries in the caller ID history intact.

• Press MENU/SELECT to copy the entry into

your directory. You can edit the name and the

number (see page 53).

• Press OFF/CLEAR to exit the caller ID history.

NOTES:

1. You may need to change how a caller ID number is dialed

if the entry does not appear in the correct format. Caller ID

numbers may appear with an area code that may not be

required for local calls, or without a 1 that may be needed

for long distance calls (see page 53).

2. If neither the name nor number is provided, UNABLE TO

SAVE appears.

Appendix A

Alert tones & lights

Alert tones

Handset tones

VOLUME

keys are pressed when the volume

Two short beeps

is already at its highest or lowest setting.

Four short beeps

Two beeps

Low battery warning.

Out of range while the handset is on a call.

Command completed successfully.

Three rising tones

Lights

VOICEMAIL

Bluetooth

Flashes when you

have new voicemail

on your HOME phone

line (offered by your

telephone service

provider). The indicator

does not support

voicemail on your

CELLULAR line.

•

On when the telephone base is paired

and connected with a cellular phone.

Flashes when the Bluetooth feature is

activated and waiting for pairing and

connection.

CHARGE

IN USE

On when the

•

On when the handset

is in use, or when

you are registering a

handset.

handset is charging

in the telephone

base or charger.

Blue backlit

display

HOME/FLASH

Flashes rapidly when

there is an incoming

HOME call.

Flashes slowly when a

HOME call is on hold.

•

Flashes when another

telephone is in use on

the same line, or when

you are deregistering

handsets from the

Blue backlit

dial pad

telephone base.

•

Flashes quickly when

there is an incoming

call.

SPEAKER

On when the

speakerphone is on.

CELLULAR

Flashes rapidly when there is

an incoming CELLULAR call.

Flashes slowly when a

CELLULAR call is on hold.

Appendix B

Handset display screen messages

Screen display messages

The telephone number you have

entered is already stored in the

directory.

ALREADY SAVED

You are trying to use a handset to

make a CELLULAR call when another

handset is already in CELLULAR call

predial mode.

BLUETOOTH SYSTEM

BUSY

Calls on the HOME and CELLULAR

lines have been put on hold.

BOTH LINES HELD

You are accessing an empty caller ID

history.

CALL LOG EMPTY

CALL TRANSFERED

CALLING

An outside call from one handset is

transferred to another handset.

The handset is calling the other

handset (for intercom calls).

The handset is going to transfer an

outside call to another handset.

OTHER HANDSET

(For systems with two

handsets)

The handset is calling another system

handset (for intercom calls).

CALLING

HANDSET X

(For systems with three

or more handsets)

The CELLULAR line is in use.

CELL

A call on the CELLULAR line has been

put on hold.

CELL LINE HELD

A handset with a low battery has

been placed in the telephone base or

charger.

CHARGING

There are no directory entries.

DIRECTORY EMPTY

ENDED

You have just ended a call.

Another system handset is calling.

HANDSET X

IS CALLING

(For systems with three

or more handsets)

Appendix B

Handset display screen messages

Screen display messages

The handset registration is

successful, with X being the

handset number.

HANDSET X

REGISTERED

The HOME line is in use.

HOME

A call on the HOME line has been put

on hold.

HOME LINE HELD

There is a call coming in.

INCOMING CALL

INTERCOM

The handset is on an intercom call.

The intercom call has just ended.

INTERCOM ENDED

You have started the intercom

process, and need to enter the

number of the handset you wish to

call.

INTERCOM TO:

(For systems with three

or more handsets)

An extension phone or one of the

handsets is in use.

LINE IN USE

LIST FULL

The directory is full. No new entries

can be saved unless some current

entries are deleted.

The battery needs to be charged.

LOW BATTERY

Mute has just been turned off so

your voice will be heard by the

other party.

MICROPHONE ON

There are new calls in the caller ID

history.

XX MISSED CALLS

The microphone is muted.

MUTED

There are new voicemail messages

on the HOME phone line.

NEW VOICEMAIL

There is no cellular phone

connected when you are trying to

call from the cellular line.

NO CONNECTED

CELLULAR PHONES

Appendix B

Handset display screen messages

Screen display messages

There is no telephone line

connected.

NO LINE

NO SIGNAL,

CALL ENDED

The handset is out of range while

on a call.

Someone else is already using the

directory or caller ID history.

NOT AVAILABLE

AT THIS TIME

The other handset is calling.

OTHER

HANDSET IS

CALLING

(For system with two

handsets)

You are connected to the external

call during call transfer.

OUTSIDE CALL

** PAGING **

The telephone base is paging

handsets.

The battery is very low. The handset

should be placed in the telephone

base or charger.

PLACE IN

CHARGER

The ringer is muted temporarily

during an incoming call.

RINGER MUTE

SAVED

The entry in caller ID history is

saved to the directory successfully.

The handset has lost communication

with the telephone base.

SEARCHING

FOR BASE

You have started transferring a call,

and need to enter the desired handset

number.

TRANSFER TO:

(For systems with three

or more handsets)

Failed intercom or conference call

(there are already two handsets

being used).

UNABLE TO CALL

TRY AGAIN

You are trying to save an entry with

no name or number from the caller

ID history.

UNABLE TO SAVE

Appendix C

Expansion handset

Your new AT&T TL91178�TL91278�TL91378 telephone system can

accommodate up to 12 handsets. You can add new handsets (AT&T TL90078,

purchased separately) to your telephone system, but you must register each

device with the telephone base before use. To register a new handset,

see page 60.

The handsets provided with the TL91178 come pre-registered as HANDSET

1. You can register up to 11 additional handsets to the telephone base, and

they will be assigned numbers in the order they are registered (HANDSET �,

HANDSET �, HANDSET 4 and so on).

The handsets provided with the TL91278 come pre-registered as HANDSET

1 and HANDSET �. You can register up to 10 additional handsets to the

telephone base, and they will be assigned numbers in the order they are

registered (HANDSET �, HANDSET 4, HANDSET 5 and so on).

The handsets provided with the TL91378 come pre-registered as HANDSET 1,

HANDSET � and HANDSET �. You can register up to nine additional handsets

to the telephone base, and they will be assigned numbers in the order they

are registered (HANDSET 4, HANDSET 5, HANDSET 6 and so on).

Appendix C

Adding and registering handsets (optional)

Handsets purchased separately (AT&T TL90078) need

to be registered to the telephone base before use.

When first purchased, all expansion handsets show

NOT REGISTERED on the screen. New handsets may

need to be charged without interruption for at least

10 minutes before registering to the telephone base.

NOT REGISTERED

To register a handset to your telephone base

1. Make sure the handset is out of the telephone base

or charger and shows NOT REGISTERED before

you begin registration.

PRESS HNDST LOC

4 SEC ON BASE

2. Press and hold HANDSET LOCATOR on the

telephone base for about four seconds (until the

red IN USE light on the telephone base is on) and

then release the button. The IN USE light remains

on while the telephone base attempts to register

a handset.

3. Place the unregistered handset into the telephone

base or charger, PRESS HNDST LOC 4 SEC ON

BASE shows on the handset screen. The handset

is now registering with the telephone base. The

handset then shows PLEASE WAIT...

and it takes up to 60 seconds to complete the

registration. There is a beep sound when the

registration is successful. The handset shows

HANDSET X REGISTERED, with X being the

handset number (1-12).

PLEASE WAIT...

HANDSET X

REGISTERED

NOTES:

1. If the registration is not successful, the screen shows NOT

REGISTERED. To reset the handset, remove the handset from

the telephone base or charger, then start again from

step 2 above.

2. You cannot register a handset if any other system handset is

in use.

Appendix C

Replacing a handset

You may need to deregister your handsets if:

You have twelve registered handsets and need to replace a handset.

-OR-

You wish to change the designated handset number of your registered

handsets.

You must first deregister ALL the handsets, and then re-register each handset

you wish to use.

Please read carefully through all the instructions on this page before

beginning the deregistration process.

To deregister all handsets

1. Press and hold HANDSET LOCATOR on the telephone base for about 10

seconds (until the IN USE light turns on and starts to flash), then release

the HANDSET LOCATOR button.

2. Immediately press and release HANDSET LOCATOR again. You must

press HANDSET LOCATOR while the IN USE light is still flashing. (The

light flashes for about seven seconds. If the light stops flashing, pick up the

handset and place it back into the telephone base, then start again with

step one above.)

3. The handsets will show SEARCHING FOR BASE and it will take about 10

seconds to complete the deregistration process. ALL handsets will show

NOT REGISTERED when deregistration is successful.

4. To re-register the handsets to the telephone base, follow the registration

instructions on page 60.

NOTES:

1. If the deregistration process was not successful, you may need to reset the system and try

again. To reset: pick up the handset and press the HOME/FLASH button, then press the

OFF/CLEAR button and place the handset back into the telephone base. You may also reset

by unplugging the power from the telephone base and plugging it back in.

2. You cannot deregister the handsets if any other system handset is in use.

3. Even if the battery is depleted, you can still deregister the handset by following the

steps above. After the handset is charged for at least 10 minutes, the screen shows NOT

REGISTERED.

Appendix D

Troubleshooting

If you have difficulty with your phone, please try the suggestions below. For

Customer Service, visit our website at www.telephones.att.com or call

1 (800) ��-�111. In Canada, dial 1 (866) �88-4�68.

I cannot pair my

cell phone to the

telephone base.

• Make sure the Bluetooth function of your cellular phone

is turned on. See your cell phone user's manual for

more information.

• Remove the AT&T DECT 6.0 from your cell phone's

handsfree device history list (see you cell phone user's

manual for more information).

• Carefully follow the pairing instructions on page 18,

making sure that your cell phone is not connected to

any other Bluetooth device.

• Turn off your cell phone, then turn it on again.

• Reset the telephone base. Unplug the electrical power.

Wait for approximately 15 seconds, then plug it back in.

Repeat the above suggestions.

• Make sure that the Bluetooth function of your cell

phone is turned on. See your cell phone user's manual

for more information.

I cannot

connect my cell

phone with the

telephone base.

• Make sure that your Bluetooth cell phone is not

connected to any other Bluetooth device.

• Turn off your cell phone, then turn it on again.

• For some cell phones, you must authorize the AT&T

DECT 6.0 device in your cell phone's Bluetooth

feature. See your cell phone user's manual for more

information.

• If the telephone base does not connect to your paired

cellular phone automatically, you may need to connect

to that device manually, refer to page 18 for details.

• If the cellular phone does not connect to the telephone

base after trying manual connection, delete AT&T DECT

6.0 from the paired device list in your cellular phone,

then start again with the pairing procedures (page 18).

Appendix D

Troubleshooting

• When you are on a CELLULAR call using the handset,

your cell phone is in use. Attempting to use the cell

phone for any other purpose may disconnect your call.

You may need to connect the cellular phone to the

telephone base manually to resume the connection,

refer to page 18 for details.

• Make sure that the Bluetooth feature is turned on in the

telephone base. Carefully follow the setup instructions

on page 18.

I cannot find

the AT&T DECT

6.0 on my cell

phone.

• Make sure that you manually set your cell phone to find

or search for devices.

• Turn off your cell phone, then turn it on again.

• Reset the telephone base. Unplug the electrical power.

Wait for approximately 15 seconds, then plug it back in.

Repeat the above suggestions.

• Most cell phones have the Bluetooth feature in the

connection or setup menus. Please refer to your cell

phone user's manual.

I don't know

how to search

for or add new

devices on my

cell phone.

• In general, press the menu key on your cell phone,

then look for the Bluetooth menu in the settings or

connection menu. In the Bluetooth menu, select the

option to search for or add new devices.

• Turn off your cell phone, then turn it on again.

My cell phone

disconnects

from the

• Make sure that you are not using your cell phone when

on a CELLULAR call.

telephone base.

• When you are on a CELLULAR call using the handset,

your cell phone is in use. Attempting to use the cell

phone for any other purpose may disconnect your call.

You may need to connect the cellular phone to the

telephone base manually to resume the connection,

refer to page 18 for details.

Appendix D

Troubleshooting

• Make sure that your cell phone is not in use when you

are trying to make a CELLULAR call.

My cell phone

is connected to

the telephone

base, but I

cannot make a

CELLULAR call.

• Make sure that your cell phone is compatible. For a list

of compatible devices, visit

www.telephones.att.com/bluetooth.

• For some smartphones, make sure that the cellular

function is turned on.

Bluetooth

• Make sure that your cellular phone is not in use when

connected to the telephone base.

System Busy

appears on the

display.

• Make sure that your cellular phone is not connected to

any other Bluetooth device.

• The AT&T DECT 6.0 can only use one Bluetooth device

at a time.

The PIN on the

telephone base

does not work.

• The default PIN is 0000.

I cannot hear

any sound on

my telephone

system when

on a CELLULAR

call.

• Reset the telephone base. Unplug the electrical power.

Wait for approximately 15 seconds, then plug it back in.

• Turn off your cell phone, then turn it on again.

• Make sure the power cord is securely plugged in.

My phone

doesn’t work

at all.

• Make sure that the battery connector is securely plugged

into the cordless handset.

• Make sure the telephone line cord is securely and firmly

plugged into the telephone base and the telephone wall

jack.

• Charge the battery in the cordless handset for at least

16 hours. For optimum daily performance, return the

cordless handset to the telephone base or charger when

not in use.

Appendix D

Troubleshooting

• Reset the telephone base. Unplug the electrical power.

Wait for approximately 15 seconds, then plug it back in.

Allow up to one minute for the cordless handset and tel-

ephone base to reset.

• You may need to purchase a new battery. Please refer

to Battery installation & charging, pages 9-10, in this

user’s manual.

I cannot get a

dial tone.

• First try all the suggestions above.

• Move the cordless handset closer to the telephone base.

You might have moved out of range.

• If the previous suggestions don’t work, disconnect the

telephone base from the telephone jack and connect to

a different phone. If there is no dial tone on that phone

either, the problem is in your wiring or local service.

Contact your local telephone company.

• Your line cord might be malfunctioning. Try installing a

new line cord.

I cannot dial

out.

• First try all the suggestions above.

• Make sure you have a dial tone before dialing. The

cordless handset may take a second or two to find the

telephone base and produce a dial tone. This is normal.

Wait an extra second before dialing.

• Eliminate any background noise. Noise from a television,

radio or other appliances may cause the phone to not

dial out properly. If you cannot eliminate the background

noise, first try muting the cordless handset before

dialing, or dialing from another room in your home with

less background noise.

• If the other phones in your home are having the same

problem, the problem is in your wiring or local service.

Contact your local telephone company (charges

may apply).

Appendix D

Troubleshooting

My cordless

handset isn’t

performing

normally.

• Make sure the power cord is securely plugged into

the telephone base. Plug the power adapter into a

different, working electrical outlet not controlled by a

wall switch.

• Move the cordless handset closer to the telephone

base. You might have moved out of range.

• Reset the telephone base. Unplug the electrical power.

Wait for 15 seconds then plug it back in. Allow up to

one minute for the cordless handset and telephone

base to reset.

• Other electronic products can cause interference

to your cordless phone. Try installing your phone

as far away from these types of electronic devices

as possible: television sets, VCRs, or other cordless

telephones.

The handset

registration is

unsuccessful.

Follow the steps below to re-register the handset.

1. Make sure the handset is out of the telephone base

or charger and shows NOT REGISTERED before you

begin registration.

2. Press and hold HANDSET LOCATOR for about four

seconds (until the red IN USE light on the telephone

base is on) and then release the button.

3. Place the unregistered handset into telephone base or

charger.

Refer to the Handset registration section on page 60

for details.

The handset screen • Unplug the battery from the handset and plug it

shows PRESS

back in (page 10). The screen should now show NOT

REGISTERED and you can follow the registration

instructions on page 60.

HNDST LOC 4 SEC

ON BASE and the

handset is out of

the telephone base

or charger.

Appendix D

Troubleshooting

SEARCHING

• Ensure that the telephone base is powered up.

FOR BASE

appears on my

cordless handset.

• Place the cordless handset in the telephone base for

one minute to allow the cordless handset and base to

resynchronize.

• Move the cordless handset closer to the telephone base.

You might have moved out of range.

• Reset the telephone base. Unplug the electrical power.

Wait for 15 seconds then plug it back in. Allow up to

one minute for the cordless handset and telephone base

to reset.

• Other electronic products can cause interference with

your cordless phone. Try installing your phone as far

away from these types of electronic devices as possible:

television sets, VCRs, or other cordless telephones.

The batteries

will not hold a

charge.

• If the cordless handset is in the telephone base or

charger and the charge light does not come on, refer to

The charge light is off in this Troubleshooting guide.

• Charge the battery in the cordless handset for at least

16 hours. For optimum daily performance, return the

cordless handset to the telephone base or charger when

not in use.

• You may need to purchase a new battery. Please refer

to Battery installation & charging, pages 9-10, in this

user’s manual.

I get noise, static, • If you subscribe to high-speed Internet service (digital

or weak signals

even when

I’m near the

subscriber line - DSL) through your telephone lines, you

must install a DSL filter between the telephone base and

the telephone wall jack (see page 7). The filter prevents

noise and caller ID problems caused by DSL interference.

Please contact your DSL service provider for more

information about DSL filters.

telephone base.

Appendix D

Troubleshooting

• You may be able to improve the performance of your

cordless phone by installing your new telephone base

as far as possible from any other existing cordless

telephone system that may already be installed.

• Other electronic products can cause interference to

your cordless phone. Try installing your phone as far

away from the following electronic devices as possible:

television sets, VCRs, or other cordless telephones.

• Do not install this phone near a microwave oven or

on the same electrical outlet. You may experience

decreased performance while the microwave oven is

operating.

• If your phone is plugged in with a modem or a surge

protector, plug the phone (or modem�surge protector)

into a different location. If this doesn't solve the

problem, re-locate your phone or modem farther apart

from one another, or use a different surge protector.

• Relocate your phone to a higher location. The phone

will likely have better reception when installed in a high

area.

• If the other phones in your home are having the same

problem, the problem is in your wiring or local service.

Contact your local telephone company (charges may

apply).

• You may hear interference if your cellular phone is too

close to the telephone base during a CELLULAR call.

Make sure that your Bluetooth enabled cellular phone is

between one to 12 feet away from the telephone base

in order to maintain a reliable connection between your

Bluetooth cell phone, telephone base, and cell tower.

I experience

poor sound

quality when

using the

• For increased sound quality while using the

speakerphone, place the handset on a flat surface with

the dial pad facing up.

speakerphone.

Appendix D

Troubleshooting

I hear other

calls while using

my phone.

• Disconnect the telephone base from the telephone jack,

and plug in a different telephone. If you still hear other

calls, the problem is probably in your wiring or local

service. Call your local telephone company.

My cordless

• Make sure that the ringer is not turned off. Refer to

handset does

not ring when I

receive a call.

Ringer volume on page 22 in this user’s manual.

• Make sure the telephone line cord is plugged securely

into the telephone base and the telephone jack. Make

sure the power cord is securely plugged in.

• The cordless handset may be too far from the telephone

base.

• Charge the battery in the cordless handset for at least

16 hours. For optimum daily performance, return the

cordless handset to the telephone base or charger when

not in use.

• You may have too many extension phones on

your telephone line to allow all of them to ring

simultaneously. Try unplugging some of the other

phones.

• The layout of your home or office might be limiting

the operating range. Try moving the telephone base to

another location, preferably on an upper floor.

• If the other phones in your home are having the same

problem, the problem is in your wiring or local service.

Contact your local telephone company (charges may

apply).

• Test a working phone at the phone jack. If another

phone has the same problem, the problem is the phone

jack. Contact your local telephone company (charges

may apply).

• Other electronic products can cause interference with

your cordless phone. Try installing your phone as

far away as possible from electronic devices such as

television sets, VCRs, or other cordless telephones.

Appendix D

Troubleshooting

• Re-install the battery, and place the cordless handset in

the telephone base. Wait for the cordless handset to re-

establish its connection with the telephone base. Allow

up to one minute for this to take place.

• Your line cord might be malfunctioning. Try installing a

new line cord.

My calls cut

in and out

while I’m using

my cordless

handset.

• Other electronic products can cause interference with

your cordless phone. Try installing your phone as far away

from the following electronic devices as possible: televi-

sion sets, VCRs, or other cordless telephones.

• Do not install this phone near a microwave oven or on

the same electrical outlet. You may experience decreased

performance while the microwave oven is operating.

• If your phone is plugged in with a modem or surge

protector, plug the phone (or modem�surge protector)

into a different location. If this doesn't solve the problem,

re-locate your phone or modem farther apart from one

another, or use a different surge protector.

• Relocate your telephone base to a higher location. The

phone will have better reception when installed in a high

area.

• If the other phones in your home are having the same

problem, the problem is in your wiring or local service.

Contact your local telephone company (charges may

apply).

The charge

light is off.

• Make sure the power and line cords are plugged in

correctly and securely.

• Unplug the electrical power. Wait for 15 seconds, then

plug it back in. Allow up to one minute for the cordless

handset and telephone base to reset.

• Clean the cordless handset and telephone base charging

contacts each month using a pencil eraser or cloth.

Appendix D

Troubleshooting

My caller ID

isn’t working.

• Caller ID is a subscription service. You must subscribe to

this service from your local telephone company for this

feature to work on your phone.

• Your caller must be calling from an area that supports

caller ID.

• Both you and your caller’s telephone companies must

use caller ID compatible equipment.

• If you subscribe to high-speed Internet service (digital

subscriber line - DSL) through your telephone lines, you

must install a DSL filter between the telephone base

and the telephone wall jack (page 7). The filter prevents

noise and caller ID problems caused by DSL interference.

Please contact your DSL service provider for more

information about DSL filters.

System does

not receive

caller ID when

on a call.

• Make sure you subscribe to caller ID with call waiting

features provided by your local telephone company.

Caller ID features will work only if both you and the

caller are in areas offering caller ID service, and if both

telephone companies use compatible equipment.

Common cure

for electronic

equipment.

If the telephone does not seem to be responding normally,

try putting the cordless handset in the telephone base or

charger. If it does not seem to respond, do the following (in

the order listed):

1. Disconnect the power to the telephone base.

2. Disconnect the cordless handset battery, and spare

battery, if applicable.

3. Wait a few minutes.

4. Connect power to the telephone base.

5. Re-install the battery, and place the cordless handset

into the telephone base.

6. Wait for the cordless handset to re-establish its

connection with the telephone base. Allow up to one

minute for this to take place.

Appendix E

Maintenance

Taking care of your telephone

• Your cordless telephone contains sophisticated electronic parts, so it must

be treated with care.

• Avoid rough treatment.

• Place the handset down gently.

• Save the original packing materials to protect your telephone if you ever

need to ship it.

Avoid water

• Your telephone can be damaged if it gets wet. Do not use the handset in

the rain, or handle it with wet hands. Do not install the telephone base

near a sink, bathtub or shower.

Electrical storms

• Electrical storms can sometimes cause power surges harmful to electronic

equipment. For your own safety, take caution when using electric

appliances during storms.

Cleaning your telephone

• Your telephone has a durable plastic casing that should retain its luster for

many years. Clean it only with a soft cloth slightly dampened with water or

a mild soap.

• Do not use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if used when you are wet or stand-

ing in water. If the telephone base should fall into water, DO NOT RETRIEVE IT UNTIL YOU UN-

PLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM THE WALL. Then pull the telephone

out by the unplugged cords.

Appendix F

Important safety information

This symbol is to alert you to important operating or servicing instructions

that may appear in this user’s manual. Always follow basic safety precautions

when using this product to reduce the risk of injury, fire, or electric shock.

Safety information

• Read and understand all instructions in the user’s manual. Observe all

markings on the product.

• Avoid using a telephone during a thunderstorm. There may be a slight

chance of electric shock from lightning.

• Do not use a telephone in the vicinity of a gas leak. If you suspect a

gas leak, report it immediately, but use a telephone away from the area

where the gas is leaking. If this product is a cordless model, make sure the

telephone base is also away from the area.

• Do not use this product near water, or when you are wet. For example,

do not use it in a wet basement or shower, or next to a swimming pool,

bathtub, kitchen sink, or laundry tub. Do not use liquids or aerosol sprays

for cleaning. If the product comes in contact with any liquid, unplug any

line or power cord immediately. Do not plug the product back in until it has

dried thoroughly.

• Install this product in a protected location where no one can trip over

any line or power cords. Protect cords from damage or abrasion.

• If this product does not operate normally, see the Troubleshooting

section on pages 6�-71 of this user’s manual. If you cannot solve the

problem, or if the product is damaged, refer to the Limited warranty

section on pages 79-81. Do not open this product except as directed in

your user’s manual. Opening the product or reassembling it incorrectly may

expose you to hazardous voltages or other risks.

• Replace batteries only as described in your user’s manual (pages 9-10).

Do not burn or puncture batteries — they contain caustic chemicals.

• This power adapter is intended to be correctly oriented in a vertical

or floor mount position. The prongs are not designed to hold the plug in

place if it is plugged into a ceiling or an under-the-table�cabinet outlet.

Appendix F

Important safety information

Caution: Use only the power adapter provided with this product. To obtain a

replacement, visit our website at www.telephones.att.com or call 1 (800)

��-�111. In Canada, dial 1 (866) �88-4�68.

Especially about cordless telephones

•

Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment

within range of the cordless handset. For this reason, you should not think

of cordless telephone conversations as being as private as those on

corded telephones.

•

Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall

switch. Calls cannot be made from the handset if the telephone base is

unplugged, switched off or if the electrical power is interrupted.

Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will often reduce or eliminate the

interference.

•

Rechargeable batteries: This product contains nickel-metal hydride

rechargeable batteries. Exercise care in handling batteries in order not to

create a short circuit with conductive material such as rings, bracelets, and

keys. The battery or conductor may overheat and cause harm. Observe proper

polarity between the battery and the battery charger.

Nickel-metal hydride rechargeable batteries: Dispose of these batteries in

a safe manner. Do not burn or puncture. Like other batteries of this type, if

burned or punctured, they could release caustic material which could cause

injury.

Appendix F

Important safety information

The RBRC™ Seal means that the manufacturer is voluntarily participating in an

industry program to collect and recycle nickel-metal hydride rechargeable batteries

when taken out of service within the United States. These batteries may be taken to

a participating local retailer of replacement batteries or recycling center. Or you

may call 1 (800) 8-BATTERY for locations accepting spent Ni-MH batteries.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food

and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless telephones at least six inches from the pacemaker.

• Should NOT place wireless telephones directly over the pacemaker, such as

in a breast pocket, when it is turned ON.

• Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from

other persons using wireless telephones.

SAVE THESE INSTRUCTIONS

Appendix G

FCC part 6� and ACTA

This equipment complies with Part 68 of the FCC rules and with technical

requirements adopted by the Administrative Council for Terminal Attachments

(ACTA). The label on the back or bottom of this equipment contains, among

other things, a product identifier in the format US:AAAEQ##TXXXX. This

identifier must be provided to your local telephone company upon request.

The plug and jack used to connect this equipment to premises wiring and

the telephone network must comply with the applicable Part 68 rules and

technical requirements adopted by ACTA. A compliant telephone cord and

modular plug is provided with this product. It is designed to be connected to a

compatible modular jack that is also compliant. An RJ11 jack should normally

be used for connecting to a single line and an RJ14 jack for two lines. See

Installation Instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices

you may connect to your telephone line and still have them ring when you

are called. The REN for this product is encoded as the 6th and 7th characters

following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In

most, but not all areas, the sum of all RENs should be five (5.0) or less. For

more information, please contact your local telephone company.

This equipment may not be used with Party Lines. If you have specially

wired alarm dialing equipment connected to your telephone line, ensure the

connection of this equipment does not disable your alarm equipment. If you

have questions about what will disable the alarm equipment, consult your

telephone company or a qualified installer.

If this equipment is malfunctioning, it must be unplugged from the modular

jack until the problem has been corrected. Repairs to this telephone

equipment can only be made by the manufacturer or its authorized agents.

For repair procedures, follow the instructions outlined under the Limited

Warranty.

If this equipment is causing harm to the telephone network, the telephone

company may temporarily discontinue your telephone service. The telephone

company is required to notify you before interrupting service. If advance

notice is not practical, you will be notified as soon as possible. You will be

given the opportunity to correct the problem and the telephone company is

required to inform you of your right to file a complaint with the FCC. Your

telephone company may make changes in its facilities, equipment, operation,

Appendix G

FCC part 6� and ACTA

or procedures that could affect the proper functioning of this product. The

telephone company is required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid

compatible.

If this product has memory dialing locations, you may choose to store

emergency telephone numbers (e.g., police, fire, medical) in these locations. If

you do store or test emergency numbers, please:

Remain on the line and briefly explain the reason for the call before hanging

up.

Perform such activities in off-peak hours, such as early morning or late

evening.

Industry Canada

Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference,

including interference that may cause undesired operation.

The term ‘’IC:‘’ before the certification�registration number only signifies that

the Industry Canada technical specifications were met.

The Ringer Equivalence Number (REN) for this terminal equipment is 0.1.

The REN is an indication of the maximum number of devices allowed to be

connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirement that the

sum of the RENs of all the devices does not exceed five.

This product meets the applicable Industry Canada technical specifications.

Appendix H

FCC part 15

This equipment has been tested and found to comply with the requirements

for a Class B digital device under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are intended to provide

reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio�TV technician for help.

Changes or modifications to this equipment not expressly approved by the

party responsible for compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Privacy of

communications may not be ensured when using this telephone.

To ensure safety of users, the FCC has established criteria for the amount of

radio frequency energy that can be safely absorbed by a user or bystander

according to the intended usage of the product. This product has been tested

and found to comply with the FCC criteria. The handset may be safely held

against the ear of the user. The telephone base shall be installed and used

such that parts of the user’s body other than the hands are maintained at a

distance of approximately 20 cm (8 inches) or more.

This Class B digital apparatus complies with Canadian ICES-003.

Appendix I

Limited warranty

The AT&T brand is used under license - any repair, replacement or warranty

service, and all questions about this product should be directed to: In

the United States of America, visit www.telephones.att.com or call

1 (800) ��-�111. In Canada, call 1 (866) �88-4�68.

1. What does this limited warranty cover?

The manufacturer of this AT&T-branded product warrants to the holder of

a valid proof of purchase (“CONSUMER” or “you”) that the product and all

accessories provided in the sales package (“PRODUCT”) are free from defects in

material and workmanship, pursuant to the following terms and conditions, when

installed and used normally and in accordance with the PRODUCT operating

instructions. This limited warranty extends only to the CONSUMER for products

purchased and used in the United States of America and Canada.

2. What will be done if the PRODUCT is not free from defects in materials

and workmanship during the limited warranty period (“materially defective

PRODUCT”)?

During the limited warranty period, the manufacturer’s authorized service

representative will repair or replace at the manufacturer’s option, without charge, a

materially defective PRODUCT. If the manufacturer repairs the PRODUCT, they may

use new or refurbished replacement parts. If the manufacturer chooses to replace

the PRODUCT, they may replace it with a new or refurbished PRODUCT of the

same or similar design. The manufacturer will retain defective parts, modules, or

equipment. Repair or replacement of the PRODUCT, at the manufacturer’s option,

is your exclusive remedy. The manufacturer will return repaired or replacement

products to you in working condition. You should expect the repair or replacement

to take approximately 30 days.

3. How long is the limited warranty period?

The limited warranty period for the PRODUCT extends for ONE (1) YEAR from

the date of purchase. If the manufacturer repairs or replaces a materially defective

PRODUCT under the terms of this limited warranty, this limited warranty also

applies to repaired or replacement PRODUCT for a period of either (a) 90 days

from the date the repaired or replacement PRODUCT is shipped to you or (b) the

time remaining on the original one-year limited warranty; whichever is longer.

Appendix I

Limited warranty

4. What is not covered by this limited warranty?

This limited warranty does not cover:

• PRODUCT that has been subjected to misuse, accident, shipping or other

physical damage, improper installation, abnormal operation or handling,

neglect, inundation, fire, water, or other liquid intrusion; or

• PRODUCT that has been damaged due to repair, alteration, or modification by

anyone other than an authorized service representative of the manufacturer; or

• PRODUCT to the extent that the problem experienced is caused by signal

conditions, network reliability or cable or antenna systems; or

• PRODUCT to the extent that the problem is caused by use with non-AT&T

accessories; or

• PRODUCT whose warranty�quality stickers, PRODUCT serial number plates or

electronic serial numbers have been removed, altered or rendered illegible; or

• PRODUCT purchased, used, serviced, or shipped for repair from outside the

United States of America or Canada, or used for commercial or institutional

purposes (including but not limited to products used for rental purposes); or

• PRODUCT returned without valid proof of purchase (see item 6 below); -or-

• Charges for installation or setup, adjustment of customer controls, and

installation or repair of systems outside the unit.

5. How do you get warranty service?

To obtain warranty service in the United States of America, visit

www.telephones.att.com or call 1 (800) ��-�111. In Canada, call

1 (866) �88-4�68. NOTE: Before calling for service, please review the

user’s manual; a check of the PRODUCT controls and features may save you a

service call.

Except as provided by applicable law, you assume the risk of loss or damage

during transit and transportation and are responsible for delivery or handling

charges incurred in the transport of the PRODUCT(s) to the service location.

The manufacturer will return repaired or replaced PRODUCT under this limited

warranty to you. Transportation, delivery or handling charges are prepaid. The

manufacturer assumes no risk for damage or loss of the PRODUCT in transit. If the

PRODUCT failure is not covered by this limited warranty, or proof of purchase does

not meet the terms of this limited warranty, the manufacturer will notify you and

will request that you authorize the cost of repair prior to any further repair activity.

Appendix I

Limited warranty

You must pay for the cost of repair and return shipping costs for the repair of

products that are not covered by this limited warranty.

6. What must you return with the PRODUCT to get warranty service? You must:

a. Return the entire original package and contents including the PRODUCT to

the service location along with a description of the malfunction or difficulty;

and

b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT

purchased (PRODUCT model) and the date of purchase or receipt; and

c. Provide your name, complete and correct mailing address, and telephone

number.

7. Other limitations

This warranty is the complete and exclusive agreement between you and the

manufacturer of this AT&T branded PRODUCT. It supersedes all other written or

oral communications related to this PRODUCT. The manufacturer provides no

other warranties for this PRODUCT. The warranty exclusively describes all of the

manufacturer’s responsibilities regarding the PRODUCT. There are no other express

warranties. No one is authorized to make modifications to this limited warranty

and you should not rely on any such modification.

State�Provincial Law rights: This warranty gives you specific legal rights, and

you may also have other rights which vary from state to state or province to

province.

Limitations: Implied warranties, including those of fitness for a particular

purpose and merchantability (an unwritten warranty that the PRODUCT is fit

for ordinary use) are limited to one year from date of purchase. Some states�

provinces do not allow limitations on how long an implied warranty lasts, so the

above limitation may not apply to you. In no event shall the manufacturer be liable

for any indirect, special, incidental, consequential, or similar damages (including,

but not limited to lost profits or revenue, inability to use the PRODUCT or other

associated equipment, the cost of substitute equipment, and claims by third

parties) resulting from the use of this PRODUCT. Some states�provinces do not

allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

Please retain your original sales receipt as proof of purchase.

Appendix J

Technical specifications

RF frequency band

1921.536 MHz — 1928.448 MHz

Channels

Operating temperature

32°F — 122°F

0°C — 50°C

Telephone base voltage

(AC voltage, 60Hz)

96 — 129 Vrms

6VDC @400mA

Telephone base voltage

(AC adapter output)

Handset voltage

2.4 — 3.2 VDC

6VAC @300mA

Charger voltage

(AC adapter output)

Replacement battery

2.4V 750mAH

Operation

Operating time*

Talk time (handset)

Talk time (speakerphone)

Standby

Up to nine hours

Up to two hours

Up to five days

* Operating times will vary depending on your actual use and the age of the battery.

Appendix J

Technical specifications

DECT 6.0 digital technology

The AT&T DECT 6.0 products offer unsurpassed range performance and

sound clarity. This is achieved through a unique antenna design and

advances in noise-filtering technology. An independent laboratory has

confirmed that AT&T DECT 6.0 products perform up to 45% better in range

competitions. Now calls can be taken in the basement, backyard and garage

with exceptional sound quality.

Telephone operating range

This cordless telephone operates within the maximum power allowed by

the Federal Communications Commission (FCC). Even so, this handset and

telephone base can communicate over only a certain distance — which can

vary with the locations of the telephone base and handset, the weather, and

the construction of your home or office.

Extended range and clarity

This telephone base comes with an antenna which gives much better clarity

and covers a longer range than before.

Index

From a record in the

caller ID history, 53

Directory dialing, 46

Alert tones, 55

Answering calls

Directory, 41

CELLULAR calls, 29

HOME calls, 27

Dial number, 46

Edit entries, 46-47

Name search, 45

New entries, 42-43

Auto connection, 18

Battery,

Display dial, 46

Charging, 10

Installation, 9

Bluetooth

DSL, 7

Elapsed time, 27, 29

Ending calls, 27-30

Expansion handset, 59

Introduction, 16

Pairing, 18

Replace a paired device, 20

Setup, 18

Bonding, 17

Flash (switch hook flash), 27, 30

Call,

Glossary of terms (Bluetooth), 17

Transfer, 39-40

Waiting,

CELLULAR calls, 30

HOME calls, 27

Caller ID (CID), 48

Add entries to phone

directory, 54

Handset,

Deregistration, 61

Expansion, 59

Key tone, 24

Language, 24

Delete entries, 54

Dial entries, 53

Chain dialing, 36

Clear voicemail indication, 25

Conference, 33

Locator, 32

Main menu, 21

Quick reference guide, 1-3

Registration, 60

Ringer tone, 23

Ringer volume, 22

Screen display

messages, 56-58

Settings, 22-26

Speakerphone, 31

Status icons, 4

Deregistration, 61

Delete entries in the

caller ID history, 54

Delete redial entries, 32

Dialing,

Temporary ringer silencing, 26

Index

Voicemail indicator, 25

Hold, 35

HOME, 1, 17

Quick reference guide, 1-3

Receiving calls, 27-30

Redial, 31

Registration, 60

Resume auto connection, 20

Ring tone options, 23

Ringer silencing, 22, 26

Ringer volume, 22

Intercom, 37-38

Incoming caller ID history, 53

Incoming calls, answering, 27, 29

Installation, 5-15

Key tone, 24

Safety information, 73-75

Search by name, 45

Speakerphone, 31

Language, 24

Last number redial, 31

Lights, 55

Technical specifications, 82-83

Telephone operating range, 83

Temporary ringer silencing, 26

Troubleshooting, 62-71

Making calls,

CELLULAR calls, 29

HOME calls, 27

Maintenance, 72

Manual connection, 19

Memory match, 50

Missed calls indicator, 52

Mute, 34

Turn off the auto connection, 19

Voice mail waiting indicator, 25

Voicemail, 3, 25, 55

Volume controls,

Handset, 33

Handset ringer, 22

Names,

Enter into directory, 43

Search for, 45

Wall-mount installation, 11-15

Warranty, 79-81

Pairing, 18

Paging tone, 32

Passkey�Passcode, 17

PIN, 17

Power adapter, 7-8

Predialing, 27, 29

www.telephones.att.com

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Advanced

American Telephones and its parent, VTech Holdings Limited, is under license. VTech Holdings Limited is a member of

Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners.

AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones,

San Antonio, TX 7��1�. Printed in China. Issue 3 AT&T �4/��.

Hanns G Computer Monitor HSG 1111 User Manual
GE ZHU36 User Manual
GE JTP70BM User Manual
Franke Consumer Products Cooktop FGC 906 I User Manual
Epson A882181 User Manual
Electrolux 880051 User Manual
Dell SE178WFP User Manual
Asus TXP4 X User Manual
Asus Computer Hardware P4B533 User Manual
AOC Computer Monitor E2795VH User Manual