R
VCD-120K
NATURAL SOUND VIDEO CD CHANGER
NATURAL SOUND VIDEO CD CHANGER
PLAY
/
SELECT
OPEN
/
CLOSE
VIDEO CD
STOP
MIC
/
RETURN
PLAYXCHANGE
MPX KARAOKE
KEY CONTROL
DISC SKIP
SKIP
/
SEARCH
NEXT
ECHO
LEVEL
1
MIC
2
PREV
KEY CONTROL
POWER
1
2
5
6
8
9
+10
3
4
7
0
MIN
MAX
MIN
MAX
GRAPHICS
OWNER’S MANUAL
Thank you for selecting this YAMAHA Video CD changer.
This unit can play discs of the following types only.
Mark printed
on the disc
Type of signal
recorded
Maximum possible
play time
Type of disc
Size (Dimension)
12 cm
Sound
+
Picture (Movie)
74 minutes
20 minutes
74 minutes
20 minutes
Video CD
8 cm (Single type)
12 cm
Sound
CD
Sound
only
+
(including CD-G)
8 cm (Single type)
GRAPHICS
Still picture
Never attempt to load a disc other than above into the unit because it may cause a damage to this unit and/or other units
connected to this unit.
VIDEO CD
Video CDs are classified into two types, version 1.1 and 2.0. This unit can play not only discs of version 1.1, but also version
2.0 on which a Playback Control can be made.
Video CD, version 1.1: With the same operation as compact discs, you can enjoy sounds and pictures (movies).
Video CD, version 2.0: In addition to a normal play which is the same as discs of version 1.1, you can make a Playback
Control. (For details on Playback Control, refer to page 18.)
FEATURES
●
●
●
●
5-Disc Carousel Auto-Changer (for
Playing Video CDs and Compact Discs)
Audio Output Mode Selector (MPX)
Button for Karaoke
●
●
●
Full Opening Disc Tray for Changing 5
Discs at a Time
13 Step
Key Level Control Buttons
Mic Level and Echo Level Controls
PLAYXCHANGE; Disc Changing
Capability while Playing Another
Video Output Format Selector (VIDEO
OUT MODE SELECT) Switch
●
●
●
Random Access Programmable Play
Single Track/Full Disc Repeat Play
●
●
●
Two MIC Jacks and a Mini-Jack for
Connecting with a Key Control Function
of a Microphone
Playback Control Function Available for
Video CDs, Version 2.0
On Screen Display Function (Displays
This Unit’s Operation Status on the TV
Monitor)
●
●
Automatic Pause Inserting Function for
Karaoke (Karaoke Mode)
Remote Control Capability
Quick Overview of a Track and a Disc with
a Touch of the DIGEST and INTRO
Buttons
CONTENTS
Caution ............................................................3
Connections ....................................................4
Controls and Their Functions ..........................6
Basic Operations .............................................9
Playback Control of Video CD (Ver. 2.0)
......................................................................18
Notes about the Remote Control Transmitter
......................................................................21
Handling Compact Discs ...............................21
Troubleshooting .............................................22
Specifications ................................................22
Pre-Programming Selections (for Singing
Karaoke) ........................................................15
2
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
WARNING
To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture.
2
Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not expose
to rain or water.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
3
4
5
Do not operate the unit upside-down. It may overheat,
possibly causing damage.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
Never open the cabinet. If a foreign object drops into the
unit, contact your dealer.
This player should not be placed on appliances, such as
amplifiers, that produce heat, or placed in a cabinet that
impedes the flow or air. This may result in a failure in this
player. Install the player in a well ventilated place. In
addition, do not place objects on the player.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
6
Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
This compact disc player is
classified as a CLASS 1 LASER
product.
CLASS 1 LASER PRODUCT
The CLASS 1 LASER
7
8
Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
PRODUCT label is located on
the rear exterior. (China and
Singapore models)
Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty.
Laser component in this product is capable of emitting
radiation exceeding the limit for Class 1.
9
To prevent lightning damage, unplug the power cord and
remove the antenna cable during electrical storms.
CAUTION
10 The generated digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW*
* This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick-
up Block.
11 Voltage selector (General model only)
The voltage selector (on the rear panel of this unit)
must be correctly set to the voltage used locally
before making any connection to the AC power
supply.
This unit is designed for home use only. Do not use this
unit for business purposes.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
NOTE:
Please check the copyright laws in your country before
recording from records, compact discs, radio, etc.
Recording of copyrighted material may infringe copyright
laws.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc
tray and close the tray by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that
the display indicates as follows.
DISC
MUSIC
Never switch off the power if the display is not pictured as
above, otherwise the unit will break down during moving
because the internal mechanism is not locked.
3
CONNECTIONS
●
●
●
Before making any connections, switch OFF the power to
If the placement of this unit causes interference to other
this unit, the amplifier, the video monitor, etc.
Connections should be made to the correct input terminals
of the amplifier, the video monitor, etc.
equipment, separate them from each other.
Video monitor
VIDEO IN
This unit
(General model)
Video connection cord (included)
LINE OUT
L
VIDEO OUT
VOLTAGE SELECTOR
MODE
SELECT
AUTO
240V
R
PAL
NTSC
To AC outlet
Amplifier
Audio connection
cord (included)
CD
Connecting to the amplifier
Connecting to the video monitor
Connect the LINE OUT terminals to the audio input terminals of
the amplifier (marked as “CD”, “AUX”, etc.) by using the
included audio connection cord.
Connect this unit’s VIDEO OUT terminal to the video input
terminal of the video monitor by using the included video
connection cord.
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals of
the amplifier.
4
Setting the VIDEO OUT MODE SELECT switch
This unit is designed for use with the NTSC and PAL television
formats. Set this switch to the position for the format your video
monitor employs.
VIDEO OUT
PAL: Outputs signals in the PAL format no matter which
format (PAL or NTSC) the currently playing disc
employs.
MODE
SELECT
Set to this position if your video monitor employs the
PAL format.
AUTO
PAL
NTSC
AUTO: Outputs signals in the same format as the currently
playing disc employs.
Set to this position if your video monitor can be
switched in between the PAL and NTSC formats
automatically.
NTSC: Outputs signals in the NTSC format no matter which
format (PAL or NTSC) the currently playing disc
employs.
Set to this position if your video monitor employs the
NTSC format.
Connecting microphones for singing Karaoke
One or two microphones can be connected to this unit.
Moreover, if you have a Yamaha microphone which has a key
control function, connect the mini-plug connector cable of the
microphone to the KEY CONTROL jack of this unit. This
connection allows you to change key of source sound by using
controls on the microphone.
Microphone
(with a key
control function)
Microphone
PLAY
/
SELECT
OPEN
/
CLOSE
STOP
MIC
/
RETURN
PLAYXCHANGE
DISC SKIP
SKIP
/
SEARCH
ECHO
LEVEL
1
MIC
2
PREV
NEXT
KEY CONTROL
8
9
7
0
MIN
MAX
MIN
MAX
5
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
1
23
4
5
6
78
9
0
NATURAL SOUND VIDEO CD CHANGER
PLAY
/
SELECT
OPEN/
CLOSE
VIDEO CD
STOP/RETURN
PLAYXCHANGE
MPX KARAOKE
KEY CONTROL
DISC SKIP
SKIP
/
SEARCH
ECHO
LEVEL
MIC
1
MIC
2
PREV
NEXT
KEY CONTROL
POWER
1
2
5
6
8
9
+10
3
4
7
0
MIN
MAX
MIN
MAX
A
B
C
D
E
F
G H
REMOTE CONTROL TRANSMITTER
1 Disc tray
Up to 5 discs can be loaded on the disc tray. Five disc-setting
positions on the disc tray are numbered from 1 to 5.
2 MPX button
Whenever this button is pressed, audio output mode changes.
The currently selected audio output mode is shown on the
display. (Refer to page 14 for details.)
2
KEY CONTROL
OPEN/CLOSE
4
3
9
R
KARAOKE
MPX
ON SCREEN
3 KARAOKE button
PROG
1
CANCEL
2
ENTER
S/F REP
When this button is pressed so that “KARAOKE” lights up on
the display, a pause is inserted each time a play of track ends.
Pressing this button once more will cancel this function.
+10
I
J
K
L
M
N
S
D
3
8
4
9
5
0
6
7
4 KEY CONTROL buttons
DIGEST
INTRO
DISC SKIP
These buttons are available when the Karaoke mode is
selected or a microphone is connected to this unit. Pressing
these buttons changes key of the track currently playing. The
current key level is shown on the display.
5
6
TIME INDEX
SEARCH
PREV
NEXT
INDEX
SKIP
O
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
:
:
Whenever pressed, key of the track becomes lower.
P
Q
8
7
RETURN
Pressing this button restores the original key level of the
track.
:
Whenever pressed, key of the track becomes higher.
5 DISC SKIP button(s)
Whenever this button is pressed, the disc tray rotates and the
selected disc changes. Pressing the
tray clockwise and pressing the
counterclockwise.
side rotates the disc
side rotates the disc tray
6
6 SKIP/SEARCH (PREV and NEXT) buttons
G MIC (1 and 2) jacks
One or two microphones can be connected to these jacks.
SKIP: Pressing this button locates the beginning of the next
track (or the currently playing track or the previous
track).
H KEY CONTROL jack
If you have a Yamaha microphone which has a key control
function, connect the mini-plug connector cable of the
microphone to this jack. This connection allows you to change
key of source sound by using controls on the microphone.
SEARCH:
Pressing and holding this button advances (or
reverses) the play rapidly.
PREV and NEXT:
Functions only when a Playback Control operation is
made on a Video CD, version 2.0. Pressing the NEXT
side selects the next display mode, and pressing the
PREV side restores the previous display mode.
* For some discs, this key operation will not function.
I PROG button
This button is available only when “KARAOKE” is illuminated
on the display. This button is used for programming tracks.
(Refer to page 15 for details.)
J CANCEL button
7 STOP/RETURN button
Used to cancel a programmed track. (Refer to page 16–17 for
details.)
Stops playing a disc during a normal disc play. During a
Playback Control operation, press this button to return to a
previous screen menu mode.
K ENTER button
When playing a Video CD, pressing this button for 2 seconds
or more calls a Playback Control mode.
Used for programming tracks. (Refer to page 15 for details.)
L DIGEST button
8 PLAY/SELECT (PLAY/REPEAT) button
Press this button to watch up to nine scenes of a track on a
Video CD. It gives you a quick overview of the track.
Pressing this button starts playing a Video CD, version 1.1 and
CD. If this button is pressed while playing a disc, play will
restart from the beginning of the track currently playing.
When this unit is in a Playback Control mode for Video CDs,
version 2.0, pressing this button selects a screen menu mode.
M INTRO button
Press this button to watch the beginning of all tracks on a
Video CD. It gives you a quick overview of what’s on the disc,
so that you can easily search for your favorites.
9 OPEN/CLOSE button
Opens and closes the disc tray.
N TIME INDEX buttons
When you press these buttons during playback, you can skip
through tracks to locate your desired position. Pressing the
button once moves the location forward or backward. Pressing
it several times allows you to move by the displayed time.
(Refer to page 12 for details.)
0 PLAYXCHANGE button
Press this button to open and close the disc tray while playing
a disc. This is useful when you want to exchange discs while
playing another disc.
A POWER switch
O INDEX buttons
Press this switch to switch the power on. Press it again to
switch the power off.
If the selected disc has index numbers, by pressing the
button once or more, you can select a desired index
number and play the disc from that point.
or
B Remote control sensor
Receives signals from the remote control transmitter.
P SLOW button
Plays a Video CD slowly. Press the PLAY button to return to
C Display panel
normal-speed playback.
See page 8.
Q PAUSE button
D Numeric buttons
Suspends playback temporarily. Press the PLAY button to
return to normal-speed playback.
Used to select a track number.
Pressing the PAUSE button during pause plays frames one by
one: this function is available only for Video CDs.
E ECHO control
This control adjusts the level of echo applied to sound signals
input from the microphone(s) connected to this unit’s MIC
jacks.
R ON SCREEN button
Press this button to turn on and off the status screen on the
video monitor. It gives you information about the current
operation status of this unit.
F LEVEL control
This control adjusts the level of sound signals input from the
microphone(s) connected to this unit’s MIC jacks.
S S/F REP button
Whenever you press this button, repeat play mode changes.
The selected mode indication appears on the display for single-
track or full-disc repeat. It also allows you to turn off the mode.
7
DISPLAY PANEL
1
2
3 4
5
6
7
DISC
MUSIC
L
R
VC
KARAOKE
VIDEO CD
PBC PROG
AUTO
NTSC PAL
8
9
0
1 VIDEO CD indicator
7 Time display
Lights up when the selected disc is a Video CD.
Shows elapsed time of the track currently playing, program
number and so on.
2 KARAOKE indicator
Lights up when the KARAOKE function is turned on by
8 PBC (Playback Control) indicator
Lights up when this unit is in a Playback Control mode for
playing a Video CD, version 2.0.
pressing the KARAOKE button, and goes off if the KARAOKE
button is pressed once more.
3 PROG indicator
9 Video signal output mode indicators
Lights up when this unit is in the program play mode.
Show the current position of the VIDEO OUT MODE SELECT
switch on the rear panel and the format of video output signal.
4 Disc number indicator (DISC)
Shows the disc number of selected disc.
0 Key level indicator
Shows the key level of the source currently playing in 13 steps.
5 Track number indicator (MUSIC)
Shows the selected track number.
:
:
:
Lights up when the current key level is lower than the
original level of the track.
Lights up when the current key level is the original level
of the track.
Lights up when the current key level is higher than the
original level of the track.
6 Audio output mode indicators
The current audio output mode selected by pressing the MPX
button is shown by these indicators. (Refer to page 14 for
details.)
8
This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
BASIC OPERATIONS
For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20.
KEY CONTROL
OPEN/CLOSE
Loading discs and starting disc play
2, 3
KARAOKE
MPX
ON SCREEN
NATURAL SOUND VIDEO CD CHANGER
PROG
1
CANCEL
2
ENTER
S/F REP
+10
3
8
4
9
5
0
VIDEO CD
6
7
MPX KARAOKE
DIGEST
INTRO
DISC SKIP
POWER
STOP/
RETURN
+10
1
1
TIME INDEX
SEARCH
PREV
NEXT
INDEX
SKIP
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
4
RETURN
POWER
1
2
Turn the power on.
4
Start a disc play.
PLAY/REPEAT
SET
Open the disc tray and load discs.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
OPEN/CLOSE
To stop play
Label side
upward.
STOP
RETRN
Disc tray
This unit stops at the beginning of the first track on the disc.
3
Close the disc tray.
Notes
●
If the STOP/RETURN button is not pressed (except when
OPEN/CLOSE
“KARAOKE” is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been
played.
●
When you press the STOP button during Video CD
playback except in the Playback Control and Karaoke
modes, the unit stops five seconds before the playback
ends and displays the time. The unit is in the resume play
mode.
Pressing the PLAY button in the resume play mode starts
playing from the last playback position.
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
●
Press the PLAY/SELECT button. (Play will begin from the
Pressing the STOP button again when the unit is in the
resume play mode cancels the resume play mode.
first track of Disc 1.)
Press a numeric button.
●
●
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)
9
To play a desired track
KEY CONTROL
OPEN/CLOSE
KARAOKE
MPX
ON SCREEN
PROG
1
CANCEL
2
ENTER
S/F REP
+10
3
8
4
9
5
0
2
6
7
DIGEST
INTRO
DISC SKIP
1
TIME INDEX
SEARCH
STOP/
PREV
NEXT
INDEX
SKIP
RETURN
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
RETURN
Selecting a track (by using the numeric
buttons)
1
If necessary, select a desired disc.
KARAOKE
MPX
DISC SKIP
ON SCREEN
For example:
PROG
CANCEL
ENTER
S/F REP
+10
To select track 5
Press “5”.
1
2
3
8
4
9
5
0
To select track 12
6
7
* If you want to play from the first track on the disc, press
the PLAY/REPEAT button.
Press “+10”, then press “2”.
DIGEST
INTRO
DISC SKIP
To select track 26
Press “+10” twice, then press “6”.
2
Select a desired track number.
Note
If a track number higher than the highest track number on the
disc is selected, the last track on the disc will be played.
+10
1
6
2
7
3
8
4
9
5
0
Note
Display information
If a Video CD, version 2.0 is selected, “PBC” lights up on the
display. In this mode, disc play is controlled by the rule of
Playback Control. (If, however, you select a disc and a track
number continuously as explained above, “PBC” does not light
up automatically.) For details of Playback Control, refer to
pages 18–20.
To cancel this mode and restore the normal play mode, press
and hold the STOP/RETURN button for more than 2 seconds.
“PBC” disappears from the display.
To call the Playback Control mode again, press and hold the
STOP/RETURN button for more than 2 seconds.
It is possible to change between the modes only when the unit
stops.
➀
➁
➂
DISC
MUSIC
VIDEO CD
AUTO
NTSC PAL
Shows the tray number of the selected disc.
Shows the selected track number.
Shows the elapsed time of the selected track.
➀
➁
➂
10
To replay from the beginning of the
track currently playing
To advance or reverse play rapidly
(Manual search)
To advance rapidly
PLAY/REPEAT
SET
SEARCH
(press and hold)
To reverse rapidly
SEARCH
To skip to the beginning of a desired
track
(press and hold)
The sound can be heard (although slightly garbled) during
•
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
●
To play from the beginning of the track following the one
currently playing
PREV
NEXT
SKIP
Manual search can also be performed while disc play is
paused, though no sound will be heard.
•
When using the SKIP/SEARCH button on the front panel:
•
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
●
To play from the beginning of the track currently playing
PREV
NEXT
SKIP
To suspend playback temporarily
●
To play from the beginning of the track before the one
currently playing
PAUSE
PREV
NEXT
SKIP
(twice)
Notes
●
Pressing the PAUSE button during pause plays frames one
Notes
by one. This function is available only for Video CDs.
To resume playback, press the PLAY button.
When a Video CD is played, you can make fine adjustments
to the paused position pressing the PAUSE button several
times. You can also switch to slow playback with the SLOW
button.
If playback pauses for 10 minutes, the operation stops
automatically to protect the internal mechanism.
These operations can also be performed when the unit is in
the pause or stop mode.
•
●
●
When using the SKIP buttons on the remote control
transmitter:
•
If a button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly.
●
11
To get a quick overview of a track
or a disc (for Video CDs only)
To repeat playback
Pressing the S/F REP button allows you to play any desired
track or disc repeatedly.
To watch scenes of a track on a Video CD
DIGEST
S/F REP
To watch the beginning of all tracks on a Video
Whenever you press the button, the repeat play mode
indication appears on the display as follows:
CD
INTRO
Display indication
Repeat play mode
Single repeat mode for playing a
track repeatedly
You can watch up to nine screens at a time on the video
monitor.
Full repeat mode for playing all
tracks on a disc repeatedly
Off (no repeat)
Notes
Notes
●
The single repeat mode overrides the program play mode.
Programmed playback cannot resume until this repeat mode
is turned off.
●
This button can work only for playing a Video CD.
●
These DIGEST and INTRO operations repeat endlessly until
you stop playback.
The monitor can show up to nine screens at a time. The
●
These repeat modes can work when playing all types of
CDs, Video CDs, version 1.1 and Video CDs, version 2.0.
However, they cannot work when playing Video CDs,
version 2.0 in the Playback Control mode.
●
number of screens varies from disc to disc. There may be a
case that the monitor can show one screen only as follows:
To skip through tracks forward or
backward
Pressing the TIME INDEX
or
button once allows you to
skip through the track backward or forward respectively by the
time shown on the display.
To cancel DIGEST and INTRO operations
Press the STOP button.
TIME INDEX
To play a Video CD slowly
When you press a button several times in a short period of
time, the time to skip changes on the display. Releasing the
button moves the position by the displayed time before or
after. The skip operation varies as follows:
SLOW
●
While you are playing a Video CD or CD, you can skip
forward or backward through the entire disc.
While you are playing programmed tracks in the Karaoke
●
mode, the skip is made forward or backward through the
entire disc including unprogrammed tracks.
While you are playing a Video CD, version 2.0 in the
Notes
●
●
This button can work only when playing a Video CD.
●
To return to normal-speed playback, press the PLAY button.
Playback Control mode, you can skip forward or backward
through the selected track.
12
To enter the KARAOKE mode
To monitor the operation status
Pressing the ON SCREEN button once shows the status
screen on the video monitor. You can easily monitor the
operations of this unit such as play, search, and stop. Pressing
the button again cancels this function.
KARAOKE
KARAOKE
ON SCREEN
A pause is inserted each time a play of track ends. To begin
playing the next track, press the PLAY/REPEAT button.
While this unit is paused, “ : ” flashes on and off on the time
display.
•
In this mode, you can program tracks for singing Karaoke.
See page 15–17 for details.
Some adjustments can be made on this unit for enjoying
Karaoke. See page 14 for details.
•
•
Note
This function is not available for CDs.
Notes
If “PBC” is illuminated on the display, pressing the KARAOKE
button to enter the Karaoke mode will cancel the Playback
Control mode (turn “PBC” off) and stop this unit.
•
Exchanging discs while playing
another disc
If the pause mode is engaged for 10 minutes, the unit is
stopped automatically to protect the internal mechanism.
•
To cancel this function
Press the KARAOKE button again. “KARAOKE” disappears
from the display.
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play. In this
case, pressing the DISC SKIP button has no effect.
PLAYXCHANGE
Note
You can load or replace discs on the tray when the disc tray is
opening, however, never load a disc on the recess hidden
inside the unit. In doing so, the disc and the unit may be
damaged, because the recess already has a disc, which is
being played.
13
Adjustments for enjoying Karaoke
KEY CONTROL
OPEN/CLOSE
KEY
CONTROL
KARAOKE
MPX
ON SCREEN
S/F REP
MPX
PROG
CANCEL
ENTER
PLAY
/
SELECT
OPEN
/CLOSE
+10
STOP/RETURN
PLAYXCHANGE
1
6
2
7
3
8
4
9
5
0
MPX KARAOKE
KEY CONTROL
DISC SKIP
SKIP
/
SEARCH
ECHO
LEVEL
MIC
1
MIC
2
PREV
NEXT
KEY CONTROL
+10
1
2
3
4
5
6
7
8
9
0
MIN
MAX
MIN
MAX
Adjusting the level of sound signals
input from the microphone(s)
MPX
KEY CONTROL
ECHO LEVEL
LEVEL
Adjusting the level of echo
applied to sound signals
input from the microphone(s)
MIN
MAX
Turning the LEVEL control clockwise increases the level, and
counterclockwise decreases the level.
ECHO
Changing audio output mode
You can select any of four audio output modes by pressing the
MPX button.
MIN
MAX
MPX
Turning the ECHO control clockwise increases the level, and
counterclockwise decreases the level.
If you need no echo effect, set this control to the “MIN”
position.
Display
Audio output mode
indication
Adjusting key of the track
currently playing
Normal stereo output
L
R
Pressing the KEY CONTROL buttons change key of the track
currently playing. The current key level is shown on the
display. Whenever a track changes, its original key level is
restored.
Sound from the left channel only is
output from both the left and right
speakers.
L
Sound from the right channel only is
output from both the left and right
speakers.
KEY CONTROL
R
Sound of vocals on the source is
attenuated.
Note: There may be a case that
vocals cannot be attenuated
effectively according to a source.
VC
: Whenever pressed, key of the track becomes lower in 6
steps.
: Pressing this button restores the original key level of
the track.
: Whenever pressed, key of the track becomes higher in
6 steps.
In this mode, if a microphone is
connected to this unit, the “VC”
indication blinks. When you sing to
the microphone, vocal sound on the
source is attenuated. When the
microphone does not sense your
vocal, vocal sound on the source is
output.
14
PRE-PROGRAMMING SELECTIONS
(FOR SINGING KARAOKE)
●
Programming is possible either while the unit is playing a
disc or stopped.
●
As many as 10 selections can be stored at one time.
KEY CONTROL
OPEN/CLOSE
9
KARAOKE
MPX
ON SCREEN
2
3
5
9
6
PROG
1
CANCEL
2
ENTER
S/F REP
+10
PLAY
/
SELECT
OPEN
/
CLOSE
3
8
4
9
5
0
STOP
/
RETURN
PLAYXCHANGE
6
7
DISC SKIP
SKIP
/
SEARCH
ECHO
LEVEL
MIC
1
MIC
2
DIGEST
INTRO
DISC SKIP
PREV
NEXT
4
7
KEY CONTROL
7
8
9
0
TIME INDEX
SEARCH
MIN
MAX
MIN
MAX
PREV
NEXT
INDEX
SKIP
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
RETURN
9
ENTER
1
2
Load discs on the disc tray.
6
7
Press the KARAOKE button so that “KARAOKE” lights
up on the display. To cancel it, press the KARAOKE
button once again.
KARAOKE
To start play, press the PLAY/REPEAT button.
PLAY/REPEAT
KARAOKE
SET
Flashes.
3
4
PROG
* This unit pauses whenever a play of track ends. To start
playing the next track, press the PLAY/REPEAT button.
DISC
MUSIC
L
R
8
9
Repeat step 3–6 to program more selections.
Select the disc (before “DISC” and “MUSIC” stop
flashing on the display).
DISC SKIP
If necessary, change the audio output mode by pressing
the MPX button.
Use the KEY CONTROL buttons and the LEVEL and
ECHO controls as you prefer. (See page 14 for details.)
5
Select the track (before “DISC” and “MUSIC” stop
flashing on the display).
Notes
●
In step 4 or 5, if “DISC” and “MUSIC” stop flashing on the
display before you finish programming a track, press the
PROG button again.
If you program a track number which is higher than the
highest track number on the disc, “E rr” appears on the
display and it cannot be programmed.
This unit can store as many as 10 selections at one time. If
you program a track number as the eleventh program, the
tenth program is replaced with it.
+10
●
●
1
6
2
7
3
8
4
9
5
0
15
Display information during programming
Shows the program number for the track to be programmed
next.
Shows the selected disc and track number.
➀
➁
DISC
MUSIC
L
R
KARAOKE
VIDEO CD
PROG
AUTO
➀
DISC
MUSIC
L
R
KARAOKE
VIDEO CD
PROG
AUTO
➁
KEY CONTROL
OPEN/CLOSE
KARAOKE
MPX
ON SCREEN
S/F REP
PROG
1
CANCEL
2
ENTER
+10
1, 3
3
8
4
9
5
0
Numeric
buttons
6
7
DIGEST
INTRO
DISC SKIP
DISC SKIP
TIME INDEX
SEARCH
PREV
NEXT
INDEX
SKIP
2
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
RETURN
To check program data
1
3
When the check is completed;
CANCEL
CANCEL
The disc number, the track number and the program
number of the last selection will flash on the display.
2
To correct the selection currently playing
PREV
NEXT
SKIP
There are two methods, as described below.
1) Select the track to replace the one currently playing by using
the DISC SKIP button and the numeric buttons.
2) Select the track to replace the one currently playing by using
the DISC SKIP button and the SKIP buttons.
Each time the SKIP
button is pressed, the disc
numbers, the track numbers and sequential order of the
programmed tracks can be checked one after another.
The display of the track number can be returned
(sequentially in reverse order) by pressing the SKIP
button.
16
KEY CONTROL
OPEN/CLOSE
KARAOKE
MPX
ON SCREEN
PROG
1
CANCEL
2
ENTER
S/F REP
+10
1
3
2
3
8
4
9
5
0
6
7
DIGEST
INTRO
DISC SKIP
TIME INDEX
SEARCH
PREV
NEXT
INDEX
SKIP
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
RETURN
To cancel the selection you are currently
programming
To cancel a programmed selection
There are two methods, as described below.
1) Press the CANCEL button instead of the ENTER button
after the track number is selected.
1
CANCEL
2) If about 30 seconds pass with no operation after the track
number is selected, the track will not be programmed.
The disc number and the track number of the last
selection will flash on the display.
To cancel all program data
Switch off the power.
PREV
NEXT
SKIP
2
3
Display the disc number and the track number to be
canceled.
ENTER
Press once while the number is flashing.
Notes
●
●
The SEARCH buttons can be used during play to search all
When programs consist of tracks from more than one disc, if
tracks including tracks not programmed.
you change a disc by using the PLAYXCHANGE button, the
programmed track on the removed disc is replaced by the
same numbered track on the new disc.
If the same number of the programmed track does not exist
on the new disc, the program will substitute the highest-
numbered track on the new disc.
EXAMPLE:
Program
Swap disc 4 (new disc has 9 tracks only)
Disc 1, Track 5
Disc 2, Track 8
Disc 4, Track 12
Disc 1, Track 5
Disc 2, Track 8
Disc 4, Track 9
17
PLAYBACK CONTROL OF VIDEO CD (Ver. 2.0)
This function is available for Video CDs, version 2.0 only.
“PBC” will light up on the display when a version 2.0 disc is
used.
Playback Control provides you with two types of new playback
enjoyment.
The Playback Control differs with each disc. This section gives
a basic explanation of Playback Control. Refer to the
instruction manual for the disc for details.
Playback selection on a screen menu
You can select pictures, music and information to play back by
selecting items on a screen menu. (Similar to having a
conversation.)
Playback of high quality pictures
You can enjoy watching pictures which are four times higher in
quality than moving pictures.
A Flowchart of Playback Control (as an example)
Mode just after the
disc is selected
RETURN
RETURN
Screen
menu
RETURN
1
2
3
RETURN
Screen
menu
RETURN
Movie
Movie
Movie
Picture
2
1
NEXT
Picture
Picture
Movie
Picture
Picture
PREV
1
2
3
4
Movie
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Picture
Playback ends.
18
Basic operation
KEY CONTROL
OPEN/CLOSE
Note
Disc play in the Playback Control mode depends on the data of
the disc used. So, according to the contents of disc, the
following operating method may not be applied to the disc.
Be sure to refer to the instruction manual for the disc.
KARAOKE
MPX
ON SCREEN
PROG
1
CANCEL
2
ENTER
S/F REP
+10
3
8
4
9
5
0
Before operation
If “KARAOKE” is illuminated on the display, press the
KARAOKE button to cancel it.
(When “KARAOKE” is illuminated, a Playback Control
operation cannot be made.)
3
6
6
7
DIGEST
INTRO
DISC SKIP
1
TIME INDEX
SEARCH
PREV
NEXT
INDEX
SKIP
5
2, 3
SLOW
PAUSE
STOP
PLAY/REPEAT
SELECT
RETURN
1
2
Stop this unit and select a Video CD (version. 2.0).
4
5
Play starts, or another menu appears. If another menu
appears, repeat step 3.
(Some discs have more than one screen menu.)
DISC SKIP
If “NEXT” or “
” appears on the screen during play,
pressing the NEXT button will change to the next menu.
PREV
NEXT
SKIP
PLAY/REPEAT
SET
If “PREV” or “
” appears on the screen during play,
pressing the PREV button will restore the previous
menu.
A screen menu appears.
PREV
NEXT
SKIP
* Some discs show several short movies
sequentially instead of a menu.
3
Select the number of item you want to play.
+10
6
If the play has finished, press the STOP/RETURN
button once or more to return to a previous mode.
1
6
2
7
3
8
4
9
5
0
STOP
RETN
* If the disc shows several short movies
sequentially, press the PLAY/REPEAT button
when a desired picture appears.
To select a number higher than 9 in step 3
PLAY/REPEAT
Example)
SECT
To select number 15
Press “+10” and “5” in succession.
•
To select number 26
Press “+10” twice, then press “6”.
•
19
To stop play
To return to a previous screen
mode during play
STOP
STOP
RETN
RETN
Press and hold for more than
2 seconds.
Press once.
* To return to the first screen mode, press the STOP/RETURN
button repeatedly until the first screen mode appears.
To play a Video CD (ver. 2.0) without
Playback Control operation
If the disc has index numbers
Pressing the INDEX
or
button once or more searches
for and select any index number. Play starts from the point of
selected index number.
Press and hold the STOP/RETURN button for more than 2
seconds when this unit is stopped. “PBC” disappears from the
display, and this unit turns into a normal play mode.
STOP
INDEX
RETN
To restore the Playback Control mode again, press and hold
the STOP/RETURN button for more than 2 seconds.
Note
When you press the DISC SKIP button or a numeric button to
select a desired track in the Playback Control mode, the unit
cancels the mode and starts playing the selected track.
20
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote control transmitter operation range
1
3
Remote control
sensor
2
Within approximately
6 m (19.7 feet)
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
●
Use only AA, R6, UM-3 batteries for replacement.
Be sure polarities are correct. (See illustration inside battery
●
Notes
●
compartment.)
There should be no large obstacles between the remote
control transmitter and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter to not work
correctly. In this case, reposition the main unit to avoid
direct lighting.
●
Remove batteries if remote control transmitter will not be
used for an extended period of time.
If batteries leak, dispose of them immediately. Avoid
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
●
●
HANDLING COMPACT DISCS
To remove a disc from its storage case, open the case and
Discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not
wipe with a circular motion; wipe straight outward from the
center.
•
•
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
Always handle the disc with care so that its surface is not
scratched.
Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances might
irreparably damage the disc’s surface.
•
•
•
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
Discs are not subjected to wear during play, but disc surface
damage when the disc is being handled can adversely affect
the disc’s play.
•
No!
To play a 8-cm (3-inch) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (12-cm/5-inch) CD on top of a 8-cm CD.
21
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
PROBABLE CAUSE
REMEDY
This unit does not switch ON when the
POWER switch is pressed.
The power cord is not connected or not
completely connected.
Securely connect the power cord.
It happens that this unit does not work
normally.
There is an influence of strong external noise
(lightning, excessive static electricity, etc.) or a the AC power cord from the AC outlet. After
Turn the power to this unit off and disconnect
misoperation on this unit while using this unit.
A foreign object is obstructing the tray.
The disc is damaged.
about 30 seconds have passed, connect the
power and operate this unit again.
The disc tray does not close completely.
Play does not begin.
Carefully check the disc tray and remove the
foreign object.
Check the disc carefully; replace it if
necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the unit
ON before trying to play a disc.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the wrong
place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if
necessary.
A disc cannot be played normally, or there
is a noise during play.
A nonstandardized disc is played.
Improper output cable connections.
Improper amplifier operation.
Play another disc.
No sound or no picture.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
No picture.
The setting of the VIDEO OUT MODE
SELECT switch is improper.
Set the VIDEO OUT MODE SELECT switch to
another proper position.
Sound and picture “skip”.
This unit is being subjected to vibrations or
impacts.
Relocate this unit.
The disc is dirty.
Clean the disc.
Sound “hums”.
Improper cable connections.
Securely connect the audio cables. If the
problem persists, the cables may be defective.
Noise from a nearby tuner.
The tuner is too close to this unit.
The disc may be warped.
Move the tuner and this unit farther apart.
Replace the disc.
Noise from inside of the disc tray.
The remote control transmitter does not
work.
The batteries of this remote control transmitter
are too weak.
Replace the batteries with new ones.
Direct sunlight or lighting (of an inverter type
of fluorescent lamp etc.) is striking the remote
control sensor of the main unit.
Change position of the main unit.
SPECIFICATIONS
Audio (analog) output level (only when playing CD)
1 kHz, 0 dB................................................................ 2 ± 0.5V
Signal to noise ratio (only when playing CD)
........................................................................ 100 dB or more
Dynamic range (only when playing CD)
.......................................................................... 96 dB or more
Harmonic distortion + noise
1 kHz ............................................................. 0.0035% or less
Frequency response
Signal processing
KEY CONTROL, ECHO................................................ Digital
Power requirements
China model ................................................. AC 220V, 50 Hz
Singapore model.......................................... AC 230V, 50 Hz
General model.................... AC 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 25W
Dimensions (W x H x D) ......................... 435 x 116 x 403 mm
Weight ............................................................................... 6 kg
Accessories ................................... Audio connection cord x 1
Video connection cord x 1
2 Hz–20 kHz ............................................................... ±0.5 dB
Video output
75Ω, Negative sync. .............................................. 1 terminal
Video output level ........................................................ 1 Vp-p
Mic input ....................................................................... 2 jacks
Remote control transmitter
Batteries (size AA, R6, UM-3)
Please note that all specifications are subject to change
without notice.
22
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ12510
|