CM.205
DUAL TABLETOP CD PLAYER WITH MIXER
USER MANUAL
INTRODUCTION
The CM.205 is the perfect CD mixer for the DJ looking for simplicity backed by professional quality. This versatile unit features dual top loading CD play-
ers and built-in line inputs for your iPod® and other portable media devices so you can easily access a variety of music sources! The CM.205 makes it
easy to please the crowd in virtually any venue, from clubs, bars and restaurants to dance studios and mobile gigs.
FEATURES
CD Section:
MP3 playback
20-sec. anti-shock buffer per side prevents CD "skips"
Up to 8% pitch control with pitch bend
Fader start
Relay play
Mixer Section
2 line inputs to connect iPod®, other MP3 device or more CD players
Gain and 3 band EQ (+9/-26) per channel
User replaceable cross fader
1/4" mic input with volume control
Headphone output with cue pan
SETUP
Checking the Contents of Package
Check that the carton contains the following items:
(1) CM.205 CD Mixer
(2) Two (2) rack ears
(3) Eight (8) screws
(4) AC Power Cord
(5) Owner’s Manual (this book)
(6) RCA to mini-jack cable for iPod®, computers or other MP3 players or CD players
(7) Stanton product guide
***iPod® is a registered trademark for Apple Computer, Inc.
3
INSTALLING THE RACK EARS
• Installing the Rack Ears
:: STEP 1 ::
Place the unit upside down over a pad, pillow, or towel to avoid damaging the control surface.
:: STEP 2 ::
Align the left rack ear with the screw holes as shown. Use 4 screws to lock the ear in place.
:: STEP 3 ::
Repeat step 2 with the right rack ear. You can now turn the unit over.
4
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your
microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers. Additionally, you can connect
the REC output to any recording device such as a CD or DVD recorder. Plug your mixer into AC power. Now you are ready to switch everything on.
IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning
off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.
5
CD PLAYER FUNCTIONS
12
11
1
2
3
4
10
5
6
7
8
9
7. CUE – Used to recall and preview cue points. A new cue point is set
1. EJECT – Opens the CD door.
every time playback is resumed.
2. FADER START – You can use the crossfader to start and stop the CD
decks. The fader start switch activates the fader start feature. When in
the ON position, sliding the crossfader to either end will start the CD
on that side and pause the CD on the other side and return to the cue
point. Fader Start always starts from the cue point.
8. SEARCH – Scans forward or back through the current track. This unit
features four scan speeds. Keep the
or
button held for a few sec-
onds to scan faster. Tap the button for frame search.
9. PLAY/PAUSE – Plays or pauses the CD. A new cue point is set every
time playback is resumed.
3. TIME – LCD display reads the time remaining or time elapsed, accord-
ing to this button.
10. PITCH BEND – Used to momentarily speed up or down the track. The
4. HEADPHONE INPUT – Insert either 1/8” or 1/4” plug for your head-
maximum pitch range is up to +/- 8% from pitch setting.
phones here.
11. PITCH FADER – Used to speed up or slow down current track. The
5. SGL/CTN – Switches between Single or Continuous play mode.
maximum pitch range is up to +/-8%.
6. TRACK – Used to select the track to be played. The +10 button skips
12. LCD DISPLAY – Shows time (minutes, seconds, frame), and pitch
10 tracks at a time.
information.
6
LCD DISPLAY FUNCTIONS
16. FRAMES – The CD Player breaks down a second into 75 frames for
accurate cueing. This shows the frames elapsed or remaining
depending on mode setting.
20
21
17. TOTAL REMAIN – Displays the total remaining time for the entire
disc.
18. REMAIN – Displays the remaining time for the current track.
19. PITCH – Shows the percentage change in pitch.
20. TIME BAR – This bar gives a visual approximation of a track’s or
disc’s remaining time. This bar will begin to flash when a CD or a track
is ending.
13
14
16
17
15
18
19
21. SINGLE – Shows when the unit is set to play just one track at a time.
When this is not lit, the CD will play continuously through all tracks.
This function is controlled by the SING/CONT button.
13. TRACK – Shows the current track that the unit is playing.
14. MINUTES – Shows the minutes elapsed or remaining depending on
mode setting.
15. SECONDS – Shows the seconds elapsed or remaining depending on
mode setting.
MIXER FUNCTIONS
22. INPUT TOGGLE SWITCH – Switches the input source between the
internal CD decks and the line inputs.
23. CHANNEL GAIN –Adjusts the pre-fader volume for cleaner sound.
27
24. CHANNEL EQ – Adjusts the high, mid and low frequency levels of
22
each channel.
25. INPUT FADER – Controls individual source levels (channels) in the
23
mix.
26. REPLACEABLE CROSSFADER – Achieves clean transitions
between the two input channels. "Hard left" selects Channel 1. "Hard
right" selects Channel 2. With the crossfader centered, both channels
are live. Use the crossfader for fast and seamless fades from one
channel to the other.
28
29
Note: The crossfader is user replaceable in case of failure. Simply
unscrew the two large screws that hold it in place, lift it out and dis-
connect its cable. Re-attach the new crossfader and screw the
mounting plate back onto the unit - you’re back in business!
24
30
27. RELAY –Set both sides of the CD player to single mode on the con-
trol. When Disc 1 ends the CD player will automatically change to
Disc 2 and when Disc 2 ends it will return to Disc 1.
31
28. MIC INPUT GAIN – Adjusts the microphone input level.
29. MASTER LEVEL – Controls the overall output level.
30. HEADPHONE LEVEL – Adjusts the cue volume.
25
32
31. CHANNEL CUE SELECTOR – Used to route channel audio to your
headphones.
32. LEVEL INDICATORS – The dual LEDs indicators are used to indicate
26
the pre-fader level of channels 1 and 2.
7
REAR PANEL FUNCTIONS
33. POWER SWITCH – Turns unit off and on. Note*** Remember to turn
ALL volume levels down when turning on/off the unit.
34. AC INPUT – This is the connection for the supplied power cable.
35. MASTER OUTPUT – Unbalanced RCA connectors controlled by the
Master level.
36. REC OUTPUT – Unbalanced RCA jacks used to send the output of
the program to any connected recording device.
37. LINE INPUTS – Unbalanced RCA jacks for connecting stereo audio
from line level sources such as CD players, DVD, MP3 players can be
connected using the included RCA cable.
NOTE: Plug mono audio sources into both Left and Right inputs using
a "Y" cable connector.
38. MIC INPUT – Insert your Microphone with 1/4 ” plug here.
ADDITIONAL FUNCTIONALITY
BURNING CD-R’s CD-RW’s
UPDATING THE FIRMWARE
When burning CD-R’s or CD-RW’s for the CM.205, it is
strongly recommended to set your burner at 8x write speed.
You can change the write speed within your CD burning soft-
ware. Check the following links for specific instructions:
Firmware updates may, as necessary, become available from Stanton’s
ed to create a bootable CD. We recommend using Magic ISO Maker
• Windows: http://support.microsoft.com/kb/309522/en-us
• Once you have burned a bootable disc from the ISO file, insert the CD
into the CM.205 The display will read UPDATE, then SUCCESS.
• Repeat this process for both decks.
• Turn the unit off and back on to complete the update process
8
SPECIFICATIONS
MIXER SECTION
FREQUENCY RESPONSE (Line to Master Output)
THD+N (Line)
20 Hz to 20 kHz +/- 2 dB
<0.01% at 1 kHz
>90 dB
S/N RATIO: REF TO MAX OUTPUT LEVEL (Dynamic Range)
Noise Floor (Line Input to Any Output) (Unbalanced Out)
-85 dBV
<
(Line to Line,Phono to Line,Line to Phono)
CROSS TALK
< -85 dB @ 1 kHz
< -85 dB @ 1 kHz
< -75 dB @ 1 kHz
CHANNEL FADER KILL
CROSS FADER KILL
Channel EQ
Hi
+9 dB, -16dB @13HZ
Mid +9 dB, -23dB @1HZ
Low +9 dB, -23dB @70HZ
CD SECTION
FREQUENCY RESPONSE (CD to Master Output)
THD+N WITH 20 KHZ LOW PASS FILTER
S/N RATIO:( ref Full-Scale)
20 Hz to 20 kHz +/- 2.0 dB
0.05% at 1 kHz
>85 dB
MICROPHONE
FREQUENCY RESPONSE (Mic to Master Output)
THD+N With 20 kHz Low Pass Filter
Mic EIN:
20 Hz to 20 kHz +/- 2.0 dB
0.05% at 1 kHz
>110 dBV
INPUT/OUTPUT
LINE INPUTS
2 x Stereo RCA -14 dBV/nominal input level 18 k Ohm unbalanced
1x TRS -54 dBV/nominal input level 10k Ohm Balanced
2x RCA unbalanced nominal load 10k Ohms
2x RCA unbalanced -10dBV into 10k ohm load
1x 1/4” Phone Jack Max Load 33 Ohms
MIC INPUT
MASTER OUTPUT
RECORD OUTPUT
HEADPHONE OUTPUT
1x 1/8” Mini Phone Jack
GENERAL
SYSTEM
Compact Disc Digital Audio
Top Loading
DISC LOADING
DISPLAY
12 Digit LCD Display
Within +/- 8%
PITCH CONTROL RANGE
PITCH BEND
PITCH ACCURACY
+/- 8%
+/-0.15%
PHYSICAL SPECIFICATIONS
DIMENSIONS
440 (W) x 266(D) x110.5(H) mm
4.4 Kgs.
WEIGHT (UNIT)
OPERATING TEMPERATURE
STORAGE TEMPERATURE
POWER SOURCE
0 ºC to 40 ºC
-20
to 50
ºC
ºC
US: 120V, 60Hz, AC 27W
EU: 230V, 50Hz, AC 27W
UK: 240V, 50Hz, AC 27W
JPN:100V,
AUS:240V,
ARG:220V,
50/60Hz,
50Hz, AC 27W
50Hz, AC 27W
AC 27W
REPLACEMENT PARTS
Contact your local reseller to order replacement parts.
9
WARRANTY & RETURN POLICY
Warranty
Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair
or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective
in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of mis-
use, alteration, normal wear, or accident are not covered under this warranty.
Returns
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replace-
ment must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the
same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the author-
ized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton
dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to
an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized
Stanton dealer’s return policy.
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise.
Stanton’s liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating
to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any
special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negl gence
of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of
merchantability or fitness for a particular purpose.
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and
country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written expla-
nation with the merchandise when returned pursuant to the terms and conditions set forth herein.
Stanton Magnetics, Inc, 3000 SW 42 St. Hollywood, Florida 33312.
10
|