SM
Sprint PCS Vision
Smart Device PPC-6700
www.sprint.com
© 2005 Sprint Nextel. All rights reserved. No reproduction in whole or
in part without prior written approval. Sprint, the “Going Forward”
logo, the NEXTEL name and logo, and other trademarks are trademarks
of Sprint Nextel.
Printed in the U.S.A.
Table of Contents
1.1 Setting Up Service.................................................................... 2
1.2 Your Sprint PCS Vision Smart Device................................... 6
1.3 Battery Information...............................................................11
1.4 Starting Up...............................................................................13
1.5 The Today Screen ....................................................................15
1.6 Using the Start Menu............................................................18
2.3 Using Letter Recognizer ........................................................24
Section 3 Using Phone Features .................................... 37
Section 6 Getting Connected......................................... 71
6.1 Connecting to the Internet ..................................................72
Section 7 Exchanging Messages.................................... 91
7.1 E-mail and Text Messages....................................................92
7.2 Pocket MSN Messenger ........................................................99
7.3 Calendar................................................................................. 102
7.4 Contacts................................................................................. 104
7.5 Tasks........................................................................................ 106
7.6 Notes ...................................................................................... 108
Section 8 Experiencing Multimedia ............................111
8.1 Using Camera and Camcorder ......................................... 112
8.2 Using Pictures & Videos..................................................... 122
8.3 Using Windows Media Player .......................................... 126
Section 9 Using Other Applications ............................135
9.1 Word Mobile......................................................................... 136
9.2 Excel Mobile.......................................................................... 138
9.3 Viewing Slide Shows with PowerPoint Mobile............ 140
Appendix .......................................................................143
A.1 Regulatory Notices.............................................................. 144
A.2 System Requirements forActiveSync 4.x....................... 151
A.3 Specifications ....................................................................... 152
A.4 Warranty................................................................................ 154
A.5 Index....................................................................................... 156
Section 1
Getting Started
In This Section
1.1 Setting Up Service
1.2 Your Sprint PCS Vision Smart Device
1.3 Battery Information
1.4 Starting Up
1.5 The Today Screen
1.6 Using the Start Menu
1.1 Setting Up Service
Setting up service on your new Sprint PCS Vision Smart Device is
quick and easy. This section walks you through the necessary steps
to set up your device's phone, set up your voicemail, establish
passwords, and contact Sprint for assistance with your
Sprint PCS Service.
Setting Up Your Voicemail
All unanswered calls to your PPC-6700 are automatically
transferred to your voicemail, even if your phone is in use or
turned off. Therefore, you will want to set up your voicemail and
personal greeting as soon as your device's phone is activated.
To set up your voicemail:
1. Access the Phone screen by
pressing the TALK button.
2. Press and hold the 1 key on the
Phone screen.
The TALK button
This will not work when pressing and holding the 1 key on the
QWERTY keyboard.
Note:
3. Follow the system prompts to:
Create your pass code.
Record your greeting.
Record your name announcement.
Choose whether or not to activate One-Touch Message
Access (a feature that lets you access messages simply
by pressing and holding the 1 key, bypassing the need
for you to enter your pass code).
2
Section 1: Getting Started
If you are concerned about unauthorized access to your
voicemail account, Sprint recommends you enable your
voicemail pass code.
Note:
Sprint PCS Account Passwords
As a Sprint PCS customer, you enjoy unlimited access to your
personal account information, your voicemail account, and your
Sprint PCS Vision account. To ensure that no one else has access
to your information, you will need to create passwords to protect
your privacy.
Account Password
If you are the account owner, you’ll have an account password
to sign on to www.sprint.com and to use when calling Sprint
Customer Service. Your default account password is the last four
digits of your Social Security number. If you are not the account
owner (if someone else pays for your Sprint PCS Service), you
can get a sub-account password at www.sprint.com.
Voicemail Password
You’ll create your voicemail password (or pass code) when you
set up your voicemail. See “Setting Up Your Voicemail” on page
2 for more information on your voicemail password.
Sprint PCS Vision Password
With your PPC-6700 and Sprint PCS Vision Service, you can set
up a Sprint PCS Vision Password. This optional password may
be used to authorize purchase of Premium Services content
and to protect personal information on multi-phone accounts.
For more information or to change your passwords, sign
on to www.sprint.com or call Sprint Customer Service at
1-888-211-4PCS (4727).
Section 1: Getting Started
3
Getting Help
To visit our website:
You can get up-to-date information on Sprint PCS Services and
Options by signing onto our website at www.sprint.com.
When you visit us online, you can:
Review coverage maps.
Learn how to use voicemail.
Access your account information.
Purchase accessories.
Add additional options to your service plan.
Check out frequently asked questions.
And more.
To reach Sprint Customer Service:
You can reach Sprint Customer Service many different ways:
From the Phone screen,dial
.
Sign on to your account at www.sprint.com.
Call us toll-free at 1-888-211-4727 (Consumer customers)
or 1-888-788-4727 (Business customers).
Write to us at Sprint Customer Service, P.O. Box 8077,
London, KY 40742.
Automated Invoicing Information
For your convenience, your phone gives you access to invoicing
information on your Sprint PCS Account. This information
includes balance due, payment received, invoicing cycle, and
the number of minutes used since your last invoicing cycle.
(Normal airtime usage will apply.)
4
Section 1: Getting Started
To access automated invoicing information:
From the Phone screen,dial
.
This service may not be available in all Affiliate areas.
Note:
Sprint PCS Directory Assistance
You have access to a variety of services and information
through Sprint PCS Directory Assistance, including residential,
business, and government listings; assistance with local or
long-distance calls; movie listings; and hotel, restaurant,
shopping, and major local event information. There is a per-call
charge and you will be billed for airtime.
To call Sprint PCS Directory Assistance:
From the Phone screen,dial
.
Sprint PCS Operator Services
Sprint PCS Operator Services provides assistance when placing
collect calls or when placing calls billed to a local telephone
calling card or third party.
To access Sprint PCS Operator Services:
From the Phone screen,dial
.
For more information or to see the latest in products and
Section 1: Getting Started
5
1.2 Your Sprint PCS Vision Smart Device
Front, Top and Left Components
1
2
3
4
5
6
18
17
16
15
7
8
9
10
11
12
13
14
1. Power/Backlight
Press to turn your PPC-6700 on and off, or turn on the backlight.
2. miniSD Card Slot
Lets you insert a storage card (miniSD) for storing data.
6
Section 1: Getting Started
3. Antenna
4. Notification LED 1
Bi-color LED on the left side: Blue and Green for Bluetooth status and
availability, and Wi-Fi status.
5. Notification LED 2
Bi-color LED on the right side: Green and Orange for CDMA standby,
SMS message, CDMA network status, notification, battery charging
status.
6. Speaker
Listen to a phone call from here.
7. Touch Screen
Use to write, draw, or make a selection with the stylus.
8. Left SOFT KEY
Press to perform the command shown in the label above the button.
9. START Button
Press to open the Start menu.
10. OK Button
Press to verify your data entries, or to exit the program in use.
11. Right SOFT KEY
Press to perform the command shown in the label above the button.
12. END Button
Press to end a call.
13. NAVIGATION Control
Press this multi-directional control up, down, left, or right to move
through menus, program instructions; carry out the selection by
pressing ENTER (the center button).
14. TALK Button
Press to answer an incoming call or dial a number.
15. Infrared Port
Lets you exchange files or data with other devices wirelessly.
16. Internet Explorer
Press to quickly launch Internet Explorer.
17. Volume Controller
Press up or down to adjust the volume.
18. Voice Recorder
Press to record a voice note.
Section 1: Getting Started
7
Back, Right and Bottom Components
19
20
21
22
23
28
24
25
26
27
19. Stylus and Stylus Slot
Use the stylus to write, draw, or select items on the touch screen.
20. Flash
Allows you to capture images even in a dark environment. To turn on
the flash, tap the Flash icon (
) when in Camera mode.
21. Camera Lens
The lens on your PPC-6700 supports two shoot modes: Wide-angle
mode (normal) and Macro mode (close-up). To change the shoot
mode, push the switch up for wide-angle mode (
macro mode ( ).
) or down for
8
Section 1: Getting Started
22. External Antenna Connector
You can connect your device to an external antenna to utilize the
superior reception quality.
23. Self-Portrait Mirror
Position your device until this mirror reflects the image you want to
capture.
24. Microphone
Speak into the microphone when receiving or making a phone call or
recording a voice note.
25. Earphone Jack
Allows you to connect to headset to listen to audio media or use the
phone’s hands-free kit.
26. Sync Connector
Use this connector for synchronizing data or recharging the battery.
27. RESET Button
With the stylus, press RESET to soft-reset your device.
28. CAMERA Button
Press and hold for 2 seconds to launch the camera. Press again to
take a picture.
Accessories
AC adapter
Recharge the device battery.
USB cable
Connect your device to a PC and synchronize data.
Stereo headset
The included stereo headset has a volume control jog dial and a
button to press to pick up a phone call.
USB cradle
Allows you to recharge your device and the second battery (if
available), and to use ActiveSync to synchronize data between your
Sprint PCS Vision Smart Device and your PC.
To recharge the device (or battery), connect the cradle to the
electrical outlet.
To synchronize, connect the cradle to the USB port on your PC.
Section 1: Getting Started
9
The QWERTY Keyboard
Your device provides you with a QWERTY keyboard, which is
similar to a standard keyboard on your PC. To use the hardware
keyboard, slide the screen panel to the right to reveal the
keyboard.
The QWERTY keyboard
You can do the following with the QWERTY keyboard:
To type lowercase letters, press the keys using your thumbs
or fingers.
To use all uppercase letters, press
first, and then
.
To type a single uppercase letter, press
corresponding key.
and then press the
To enter a number or symbol (labeled in red color), press
and then press the corresponding key.
Press the Left/Right SOFT KEY to perform the command
shown in the label above the key.
Press
Press
to verify your data entries or exit the program in use.
to open the Start menu.
Press the arrow keys
for directional movement.
10 Section 1: Getting Started
1.3 Battery Information
Your device contains a rechargeable Li-ion polymer battery. Your
device is designed to use only manufacturer-specified original
batteries and accessories. Battery performance depends on
many factors, including your wireless service provider’s network
configuration, signal strength, the temperature of the environment
in which you operate your device, the features and/or settings you
select and use, items attached to your device’s connecting ports,
and your voice, data, and other program usage patterns.
Battery life estimates:
Talk-time: 2.5 – 5 hours
Warning: To reduce risk of fire or burns,
do not disassemble, crush, puncture,
short external contacts, heat above
60oC (140oF), or dispose of in fire or
water. Replace only with manufacturer
specified batteries. Recycle or dispose
of used batteries according to the local
regulations.
Install and Charge the Battery
New batteries are shipped partially charged. Before you can use
your device, you need to install and charge the battery. To install
the battery, slide the battery cover off, and then insert the battery
by aligning the exposed copper part of the battery pack with the
protruding copper conductor. Then, gently push the battery into
place and replace the battery cover.
Some batteries perform best after several full charge/discharge
cycles. The time needed to fully charge the battery is less than 4
hours. You can charge the battery by:
Connecting your device directly to an external power source.
Plugging the device sync cable into the USB port on your PC.
Section 1: Getting Started 11
Low Battery
When the low-battery warning appears, do the following:
1. Immediately save your current data.
2. Synchronize with your PC (see Section 4 on page 45).
3. Turn off your device.
To check the battery power:
Tap Start > Settings > System tab > Power; or,
Tap the Battery icon on the Today screen.
Power information
12 Section 1: Getting Started
1.4 Starting Up
Turn Your PPC-6700 On and Off
To turn on your PPC-6700, press the POWER button on the top of
the device. When you turn on the device for the first time, you are
asked to complete a calibration process. For more information,
see “Calibrate the Device” in this section.
To turn off the device, press POWER again.
Calibrate the Device
Calibrating the device screen involves tapping the center of a
cross with the stylus as it moves around the screen. This process
ensures that when you tap the screen with your stylus, the
tapped item is activated.
If your device does not accurately respond to screen taps, please
follow these steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, and follow the
instructions on the screen.
Buttons Lock
It is possible to lock the buttons on the device, so that the
applications may not be accidentally launched. Once you enable
this feature, only the Power button can turn on your PPC-6700.
To configure the Buttons Lock settings:
1. Tap Start > Settings > Personal
tab > Buttons.
2. On the Lock tab, select the Lock
all buttons except Power button
check box.
3. Tap OK.
Section 1: Getting Started 13
The Buttons Lock feature does not disable the phone function of
your PPC-6700. When you enable this feature, you still can use
the buttons on the device to receive or reject an incoming call.
Note:
Manage Screen Settings
The device touch screen has three orientation modes: Portrait,
Landscape (right-handed), and Landscape (left-handed). Portrait
mode allows you to get a better view or a better operation of
certain programs on your device, while Landscape mode may be
optimal for viewing longer text files.
To change the orientation, tap Start > Settings > System
tab > Screen, and select the orientation you want: Portrait,
Landscape (right-handed), or Landscape (left-handed).
Portrait mode
Landscape mode
To smooth the edges of screen fonts for many programs, on
the ClearType tab, select the Enable ClearType check box.
To increase the readability or to see more content on the
screen, on the Text Size tab, adjust the text size by moving
the slider.
14 Section 1: Getting Started
1.5 The Today Screen
The Today screen displays important information, such as upcoming
appointments and status indicators. You can tap a section on the
screen to open the associated program.
To access the Today screen, tap Start > Today.
To customize the Today screen display, including the
background image, tap Start > Settings > Personal tab > Today.
1
2 3 4
5
6
7
8
9
10
13
14
15
11
1. Tap to open the Start menu.
12
2. Tap to view call status information.
3. Tap to view network status and related options.
4. Tap to control device volume level.
5. Displays the current time. Tap and hold to change the clock
mode: Analog or Digital.
Section 1: Getting Started 15
6. Displays the current date. Tap to setup date, time, alarm,
and more.
7. Tap to set owner information.
8. Your day at a glance with reminders. Tap to open the related
program: messages, tasks, and appointments.
9. Tap to open MSN sign-in screen.
10. For first time use, tap this icon to open Sprint PCS Business
Connection download page. When you download and
install it, you can use the Biz Conn Calendar and PCS
Business Conn services (registration required).
11. Tap to open the Calendar screen.
12. Tap to open the Contacts screen.
13. Tap to start Wireless Manager.
14. Tap to open the Power Settings screen.
15. Tap to change the display mode.
You can access the Today screen from anywhere by tapping
Start > Today.
Note:
16 Section 1: Getting Started
Indicators
Following are some of the status icons that you may see on
your device.
Indicates the battery is fully charged.
indicates the
battery is very low.
indicates the battery charging.
Sound on.
Sound off.
Ringer in vibration mode.
1x data connection is active.
EVDO data connection is active.
ActiveSync connection is active.
ActiveSync connection is not active on the turned on Flight
mode.
Synchronization in progress.
Synchronization error.
Indicates maximum signal strength.
No signal.
Phone is turned off.
No phone service.
Voice call in progress.
Missed call.
New e-mail or text messages.
New voice mail.
Indicates any of wireless function (Phone, Bluetooth, or
Wi-Fi) is turned ON.
indicates the three features are turned OFF.
Indicates the display mode is Portrait mode.
/
indicates the Landscape mode.
Section 1: Getting Started 17
1.6 Using the Start Menu
The Start menu, located at the top left corner of the Today screen,
displays a list of programs. It lets you close a screen and switch
from one program to another. You can start a program by scrolling
through the programs list and then pressing ENTER, or by tapping a
program with the stylus.
1
2
3
4
5
6
1. Tap to display the Today screen.
2. Tap to start a program. The items displayed in Start menu
can be customized by tapping Start > Settings > Personal
tab > Menus.
3. Tap to start a recently-used program.
4. Tap to view and select more programs that are installed in
your device.
5. Tap to change device settings.
6. Tap to see a Help topic for the current screen.
18 Section 1: Getting Started
Program icons
Following are some of the icons for the programs that are already
installed on your device.
ActiveSync. Synchronizes information between your device
and a PC.
AudiblePlayer. Provides you with the newest way to stay
informed and entertained.
Calculator. Performs basic arithmetic and calculations,
such as addition, subtraction, multiplication, and division.
Calendar. Keeps track of your appointments and creates
meeting requests.
Camera. Snaps photos or shoots video clips with
accompanying audio.
Contacts. Keeps track of your friends and colleagues.
Download Agent. Provides information about the
download status and the downloaded content from the
Internet.
Enroller. Enables you to install and use certificates to
connect to your Wi-Fi network.
Excel Mobile. Creates new workbooks or lets you view and
edit Excel workbooks.
File Explorer. Enables you to organize and manage files on
your device.
Games. Lets you play two pre-installed games: Bubble
Breaker and Solitaire.
Help. Enables you to see Help topics for a program on your
device.
Internet Explorer. Internet Explorer browses Web and
WAP sites, and downloads new programs and files from the
Internet.
Section 1: Getting Started 19
Messaging. Sends and receives e-mail and text messages.
Notes. Creates handwritten or typed notes, drawings, and
recordings.
PCS Business Conn. When you install the PCS Conn Client,
you can access your e-mail more conveniently using the
PCS Business Connection mail account.
Phone. Makes and receives calls, switches between calls
and sets up conference calling.
Pictures & Videos. Collects, organizes, and sorts picture
and video files in the My Pictures folder of your device or on
a storage card.
Pocket MSN. Sends and receives instant messages with
your MSN Messenger contacts.
PowerPoint Mobile. Lets you view and edit PowerPoint
slides and presentations.
Search. Enables you to search contacts, data, and other
information on your device.
Software Store. Lets you connect to the most famous
online store, Handango, to get the stuff you want.
Tasks. Keeps track of your tasks.
Windows Media. Enables the multimedia function on
your device.
Wireless Manager. Allows you to manage the Wi-Fi
connection.
Wireless Modem. Enables your device as an external
modem for a PC by using a USB port, or infrared port.
Word Mobile. Creates new documents or lets you view
and edit Word documents.
Terminal Services Client Allows you to log on a PC
running Terminal Services or Remote Desktop, and use all
the programs available on that PC from your PPC-6700.
20 Section 1: Getting Started
Section 2
Entering and Searching
Information
In This Section
2.1 Introduction
2.2 Using the Keyboard
2.3 Using Letter Recognizer
2.4 Using Block Recognizer
2.5 Using Transcriber
2.6 Using Phone Pad
2.7 Drawing and Writing on the Screen
2.8 Recording a Note
2.9 Searching Information
2.1 Introduction
When you start a program or select a field that requires text or
numbers, Input Panel automatically becomes available. Input Panel
provides access to the various input methods available on your
PPC-6700, including Block Recognizer, Keyboard, Letter Recognizer,
Phone Pad, and Transcriber. By default, the Input Panel icon appears
on the menu bar to indicate which input method is currently
selected. The Input Selector arrow (shown at the right side of the
Input Panel icon) opens a list of available input methods.
Example:
Input Panel (now: Keyboard)
Input Selector arrow
Input Panel icon
Icon
Input method
The on-screen keyboard.
Letter Recognizer or Block Recognizer.
Phone Pad
Transcriber
To show or hide Input Panel:
Tap the Input Panel icon on the menu bar.
22 Section 2: Entering and Searching Information
2.2 Using the Keyboard
To enter text, symbols, and numbers, you can either type using the
QWERTY keyboard or the standard on-screen keyboard. For use of
the hardware keyboard, see “The QWERTY Keyboard” on page 10.
Use the Standard On-screen Keyboard
The on-screen keyboard is available when text entry is possible.
You can enter text by tapping keys on the keyboard that are
displayed on the screen.
To enter text using the on-screen keyboard:
1. In a program, tap the Input Selector arrow, and then
tap Keyboard.
2. Enter text by tapping keys on the on-screen keyboard.
To enlarge the on-screen keyboard:
1. Tap the Input Selector arrow, and then tap Options.
2. In the Input method list, select Keyboard.
3. Tap Large Keys.
Section 2: Entering and Searching Information 23
2.3 Using Letter Recognizer
With Letter Recognizer, you can write individual letters, numbers,
and punctuation, which are then converted into typed text.
To use Letter Recognizer:
1. In a program, tap the Input Selector arrow, and then tap
Letter Recognizer.
2. Write characters, numbers, and symbols in the designated
writing area.
Enter capital letters by writing in the ABC (left) area of
the box.
Enter lower case letters by writing in the abc (middle)
area of the box.
Enter numbers by writing in the 123 (right) area of
the box.
Enter punctuation and symbols by writing the desired
character in the 123 (right) area of the box.
24 Section 2: Entering and Searching Information
2.4 Using Block Recognizer
With Block Recognizer, you use a single stroke to write letters,
numbers, symbols, and punctuation, which are then converted into
typed text.
To use Block Recognizer:
1. In a program, tap the Input Selector arrow, and then tap
Block Recognizer.
2. Write characters, numbers, and symbols in the designated
writing area.
Enter letters by writing in the abc (left) area of the box.
Enter numbers by writing in the 123 (right) area of
the box.
Enter symbols and punctuation by tapping in either
area of the box, and then writing the desired character.
Letter Recognizer and Block Recognizer are available when text
entry is possible.
Note:
For help with writing characters with Letter Recognizer and
Block Recognizer, tap the question mark near the writing area.
Tip:
Section 2: Entering and Searching Information 25
2.5 Using Transcriber
Transcriber is a handwriting recognition program that allows you to
write in cursive, print, or a combination of both. Transcriber works
transparently in the background of programs, recognizing words
with its integrated dictionary. When Transcriber is turned on, it
interprets stylus movement anywhere on the screen as handwriting
input. For more information about using Transcriber, see Help on
your device.
To start Transcriber:
1. Start a program that accepts user input, such as
Word Mobile.
2. Tap the Input Selector arrow, and then tap Transcriber.
The Transcriber introductory screen appears.
To write using Transcriber:
1. From the Transcriber Info screen, tap OK to display your
program’s entry screen.
2. Use your stylus to write or print your input text.
Transcriber will wait until you pause and then convert
your entry into typed text.
To enter punctuation and symbols:
Transcriber comes with an on-screen keyboard that provides an
easy way to add punctuation or a special symbol to
existing text.
In a program, tap
on the Transcriber toolbar. The
keyboard remains visible until you tap the button again.
To reposition the keyboard, tap and hold the title bar, then
drag to the desired location.
Tips:
When no text is selected, you can also open the keyboard by
doing the gesture.
To edit text:
26 Section 2: Entering and Searching Information
1. In a program, draw a line across the text you want to edit.
2. After you lift the stylus from the screen, the line will
disappear and the selected text will be highlighted.
3. Do either of the following:
Rewrite the text.
Use gestures to capitalize letters, insert a space, and
so on. For information about using gestures, see
“Transcriber Gestures” in this section.
Transcriber Gestures
Use quick strokes of the stylus to edit your text or to insert
returns, spaces, or tabs.
Do
To
Insert a paragraph return at the cursor.
The horizontal portion of the gesture must be at least two
times longer than the vertical portion.
Insert a space at the cursor.
The horizontal portion of the gesture must be at least two
times longer than the vertical portion.
Move the cursor one space back and erase any text.
Do the gesture by drawing a line from right to left.
Open the menu of alternate words if a word is selected or
the on-screen Transcriber keyboard if no text is selected.
Do the gesture by drawing a line straight down and back up.
Change the capitalization of a selected letter, word, or block
of text.
Do the gesture by drawing a line straight up.
Undo the last action.
Do the gesture by drawing a line straight up and back down.
Section 2: Entering and Searching Information 27
Copy the selected text.
Do the gesture by drawing a line from left to right and back.
Cut the selected text.
Do the gesture by drawing a line from right to left and back.
Paste copied or cut text.
Do the gesture by drawing a line from the lower left of the
screen diagonally up toward the right and back down to the
right.
Insert a tab.
The horizontal portion of the gesture must be at least two
times longer than the vertical portion.
You can also use the Enter, Space, and Backspace buttons on
the Transcriber toolbar.
Tip:
The Transcriber Toolbar
The Transcriber toolbar, which appears at the bottom of the
screen when Transcriber is open, provides easy access to several
tools, Enter, Space, and Backspace buttons, and Left and Right
arrow buttons.
Tap
To
Open the Options dialog box, where you can set options such
as writing direction, text entry, and shorthand.
Open Letter Shapes, where you can set your personal writing
styles to maximize recognition.
Use the miniature keyboard to quickly enter numbers,
punctuation, and other symbols.
28 Section 2: Entering and Searching Information
Change the character recognition mode.
a mode. This is the default for optimum handwriting
recognition.
123 mode. Numbers and some letters are allowed and
the calculator is activated.
A mode. All letters are automatically capitalized.
If you are in A or 123 mode, recognition returns automatically
to the default mode once you lift the stylus.
Insert a space at the cursor.
Insert a paragraph return at the cursor.
Move the cursor one space to the left.
Move the cursor one space to the right.
Move the cursor one space back and erase any text.
Open Transcriber Help.
Section 2: Entering and Searching Information 29
2.6 Using Phone Pad
Phone Pad provides a flexible, alternate method for entering
information. Using Phone Pad, you can easily switch between three
input modes: T9, Multi-Tap, and Numeric, including a list of symbols
for greater convenience.
To start Phone Pad:
1. Start a program that accepts
user input, such as Word
Mobile.
2. Tap the Input Selector arrow,
and then tap Phone Pad.
Phone Pad can be started at any time, except when your
device is in Camera mode or displaying the Today screen.
Tip:
Using T9 Input Mode
By default, the device Phone Pad is in T9 mode. It is the easiest
and most convenient way to enter text in English because it has
the capability to enter text in alphanumeric format. As you tap al-
phanumeric keys on the keypad, T9 tries to automatically match
the letters you have selected with the most likely
completed word.
You can do the following by using the T9 input mode:
To enter a word, tap the keys on the keypad.
To insert a word in the current program screen:
1. Tap any word in the wordlist (directly above the keypad).
2. Tap
.
3. Select a word, and then tap
to insert the word.
30 Section 2: Entering and Searching Information
To enter a number, you can tap and hold on the desired
number key on the keypad; or select the numeric mode, and
then tap the number.
To insert a space or tab, tap
.
To scroll through the wordlist, tap or
.
To enter a capital letter, tap
To add symbols, you can tap
.
to display the most
frequently used symbols on the wordlist; or tap
a symbol from the complete list.
to choose
Use Multi-Tap Input Mode
Multi-Tap input mode is an alphabetic mode that allows you to
manually enter individual letters to form words. To select Multi-
tap input, tap the mode selection key until “abc” appears on
the key.
Use Numeric Input Mode
Numeric input mode allows you to enter a number each time
you tap a number key. You can compile several numbers on the
wordlist, and then tap
to insert the numbers at the current
cursor position on the screen. To select Numeric input mode, tap
the mode selection key until “123” appears on the key.
Use the Options Screen
You can customize various behaviors
for Phone Pad, including the language
database, on the Options screen. To access
the Phone Pad Options screen, do any of
the following:
Tap and hold
on the keypad.
Tap the Input Panel icon at the
bottom of the screen, and tap
Options. Then, on the Input Method
tab of the Input screen, tap Options.
Section 2: Entering and Searching Information 31
The Options screen provides you with the following check boxes
to setup:
Turn on one-touch symbol entry. Select this check box to
choose one symbol at a time.
Auto-hide matching word list. Select this check box to hide
the wordlist after you choose a word.
Turn on screen tap sound. Select this check box to play a
sound each time you tap a key.
Automatically add a space after selecting a word. Select this
check box to add a space automatically at the end of
every word.
Enable pop-up menu for deleting user-defined words. Select
this check box to display a pop-up (shortcut) menu whenever
you tap a word that is in the user database.
2.7 Drawing and Writing on the Screen
With your PPC-6700, you can draw directly on the screen, or write
on the screen and save notes in your own handwriting. To do this,
you must set the input mode in Notes to Writing. If you prefer to
use handwriting or frequently add drawings to your notes, you may
find it helpful to set Writing as the default input mode. If you prefer
typed text, set Typing as the default input mode.
To set the input mode for Notes:
1. Tap Start > Programs > Notes.
2. In the note list, tap Menu > Options.
3. In the Default mode box, tap one of the following:
Writing if you want to draw or enter handwritten text
in a note.
Typing if you want to create a typed note.
4. Tap OK.
32 Section 2: Entering and Searching Information
To write a note:
1. Tap Start > Programs > Notes.
2. In the note list, tap New.
3. Write your text on the screen.
4. When finished, tap OK to return to the note list.
To select handwritten text, tap and hold next to the writing.
As soon as dots appear, and before they form a complete circle,
quickly drag across the writing. If a letter crosses three ruled
lines, it is treated as a drawing rather than text.
Notes:
To draw a note:
1. Tap Start > Programs > Notes.
2. In the note list, tap New.
3. Draw on the screen, crossing at least three ruled lines.
4. A selection box labeled Drawing appears around
your drawing.
5. When finished, tap OK to return to the note list.
To select a drawing (for example, to copy or delete it), tap and
hold the drawing briefly. When you lift the stylus, the drawing
is selected.
Note:
Section 2: Entering and Searching Information 33
2.8 Recording a Note
To create a voice note:
1. Tap Start > Programs > Notes.
2. Do one of the following:
To create a stand-alone recording, record from the
note list.
To add a recording to a note, create or open a note.
3. If you do not see the Recording toolbar, tap Menu > View
Recording Toolbar.
4. Tap the record icon (
) to begin recording.
5. Hold your device’s microphone near your mouth or other
source of sound.
6. Tap the stop icon (
) when finished recording.
7. If you are adding a recording to a note, tap OK to return to
the note list when finished.
8. If you are recording in an open note, an icon will appear in
the note.
9. If you are creating a stand-alone recording, the recording
will appear in the note list.
To change recording formats:
1. Tap Start > Settings > Personal tab > Input.
2. Tap the Options tab, and in the Voice recording format list,
tap the format you want.
3. Tap OK.
You can also change recording formats from within Notes. In
Note: the note list, tap Menu > Options > Global Input Options link
(at the bottom of the page).
34 Section 2: Entering and Searching Information
2.9 Searching Information
You can search for files and other items stored in the My Documents
folder of your Sprint PCS Vision Smart Device, or on a storage card
that is installed in the device. You can search by file name or by
words located in the item. For example, you can search in e-mail
messages, notes, appointments, contacts, and tasks, as well as in
online Help.
To search for a file or an item:
1. Tap Start > Programs > Search.
2. In Search for, enter the file name, word, or other informa-
tion you want to search for.
3. If you have looked for this item before, tap the Search for
arrow and select the item from the list.
4. In Type, select a data type to help narrow your search.
5. Tap Search.
6. The My Documents folder and subfolders are searched.
7. In the Results list, tap the item you want to open.
The storage card symbol (
of files saved on a storage card.
) is displayed next to the names
Note:
Section 2: Entering and Searching Information 35
Section 3
Using Phone Features
In This Section
3.1 Using the Phone
3.2 Making a Call
3.3 Receiving a Call
3.4 In-call Options
3.5 Additional Dialing Information
3.1 Using the Phone
Like a standard mobile phone, you can use your PPC-6700 to make,
receive, and keep track of calls and send SMS messages. You can also
take notes while talking, and dial directly from Contacts.
The Phone Screen
From the Phone screen, you can access Call History, Speed
Dial, and Phone settings. To open the Phone screen, do one
of the following:
Use the stylus and tap Start > Phone.
Press the TALK button on the device.
Directly dial a phone number by pressing
The TALK button
numeric keys on the hardware keyboard.
To turn on/off flight mode:
In many countries you are required by law to turn off your
phone on board an aircraft. Turning off the power doesn’t turn
off the phone. You must enable flight mode in order to turn off
the phone.
You can turn on flight mode and still keep your device turned
on and use other functions.
Tap the Signal icon ( ), and then tap Turn on flight mode to
turn the phone off.
To resume call function, disable flight mode by tapping Turn
off flight mode.
38 Section 3: Using Phone Features
To adjust the device volume:
1. Tap the Speaker icon (
).
2. Under Volume, do the following:
Adjust the phone volume (
)
or device volume (
) by moving the slider to the
desired volume level.
Tap On, Vibrate, or Off to change both the system and
ringer volume settings.
Adjusting volume
To adjust the conversation phone volume, you must do it during
a call. Adjusting the volume at another time will affect the ring,
notification, and MP3 sound levels.
Notes:
When you enable Vibrate mode, sound will automatically be
muted and the device will vibrate when an incoming call is
received. The Vibrate icon (
) will appear in the title bar to
indicate that Vibrate mode is enabled.
Section 3: Using Phone Features 39
3.2 Making a Call
With your PPC-6700, you can make a call from Phone, Contacts, Call
History, and Speed Dial.
Make a Call From Phone
On the Phone screen, tap the desired
phone number, and tap Talk at the
lower right of the screen. If you tap
a wrong number, tap the Back arrow
to erase individual numbers one at a
time. To delete all the numbers, tap
and hold the Back arrow.
Make a Call From Contacts
You can do one of the following:
Tap Start > Contacts.
Tap the desired contact, and press TALK twice (once to
send the number to the Phone screen, and once to dial
the number).
You can also tap the desired contact in the contacts list,
and tap the phone number that you want to call. Or, tap
and hold the desired contact, and on the shortcut menu,
tap Call Work, Call Home, or Call Mobile.
To specify the number to dial:
By default, the mobile telephone number for that contact is
dialed when you make a call from Contacts. However, you can
specify that a different phone number is used instead.
1. Tap Start > Contacts.
2. Press NAVIGATION up or down to select the contact.
3. Press NAVIGATION left or right. The letters representing
the number will change as you scroll through them.
40 Section 3: Using Phone Features
Make a Call From Call History
1. On the Phone screen, tap Call History.
2. Tap Menu > Filter and tap a category.
3. Scroll to the desired contact or phone number, and tap Call.
Make a Call From Speed Dial
Use Speed Dial to call frequently-used numbers with a single tap.
For example, if you assign a contact to the Location 2 in Speed Dial,
you can simply tap and hold 2 on Phone screen to dial the contact’s
number. The number must already exist in Contacts before you can
create a Speed Dial entry. When creating a Speed Dial, note that
the Location 1 is generally reserved for your voice mail.
To create a Speed Dial entry:
1. On the Phone screen, tap Menu > Speed Dial.
2. Tap Menu > New.
3. Tap a contact. Tap the phone number for which you want
to create a speed dial.
4. In the Location box, select an available location for the
new speed dial.
To create a Speed Dial entry from Contacts, tap and hold the
contact name, tap Add to Speed Dial, and then select an
available location for the new Speed Dial.
Tips:
To delete a Speed Dial, in the Speed Dial list, tap and hold the
desired entry, and then tap Delete.
Section 3: Using Phone Features 41
3.3 Receiving a Call
To answer or reject an incoming call:
When you receive a phone call, a message will appear, giving
you an option to either answer or ignore the incoming call.
To answer the call, tap Answer, or press TALK.
To reject the call, tap Ignore, or press END.
To end a call:
Once an incoming or outgoing call is in progress, you can
tap End, or press END or to hang up.
3.4 In-Call Options
To put a call on hold:
Your PPC-6700 notifies you when you have another incoming
call, and gives you the choice of rejecting or accepting the
call. If you are already on a call and accept the new call, you
can choose to switch between the two callers, or set up a
conference call between all three parties.
1. Tap Answer to take the second call, and put the first one
on hold.
2. To end the second call and return to the first call, tap End,
or press END.
To switch between two calls:
Tap Answer, or press TALK.
42 Section 3: Using Phone Features
To set up a conference call:
Not all service providers support conference calling. Before
using the feature, contact your service provider for details.
1. During a call, put the current call on hold, and dial a
second number.
2. When you’re connected to the second party, tap Answer,
or press TALK to begin the three-way call.
To turn on or off the speakerphone:
The built-in speakerphone on your PPC-6700 allows you to talk
hands-free or lets other people listen to the conversation.
During a call, tap Speaker On, or press and hold TALK until
the speakerphone turns on. The speakerphone icon (
appears in the title bar.
)
To turn off the speakerphone, tap Speaker Off, or press
and hold TALK again until the speakerphone turns off.
To avoid damage to your hearing, do not hold the device
against your ear when the speakerphone is turned on.
Note:
To mute a call:
You can turn off the microphone during a call, so that you can
hear the caller but the caller cannot hear you.
During a call, tap Mute.
When the microphone is turned off, the mute icon
(
) appears on the screen. Tap Unmute to turn on the
microphone again.
Section 3: Using Phone Features 43
3.5 Additional Dialing Information
To make an emergency call:
Enter the international emergency number for your locale,
and then tap Talk.
To make an international call:
1. Tap and hold the 0 key on the Phone screen until the + sign
appears. The + replaces the international access code for
the country from which you are calling (for example, 911
for international calls placed from the United States).
2. Enter the full phone number you want to dial, and then tap
Talk. The full phone number includes country code, area
code (without the leading zero, if any) and phone number.
44 Section 3: Using Phone Features
Section 4
Synchronizing
In This Section
4.1 Using ActiveSync
4.2 Synchronizing Information
4.3 Synchronizing Via Infrared and Bluetooth
4.4 Synchronizing Music, Video, and Pictures
4.1 Using ActiveSync
ActiveSync synchronizes information on your Sprint PCS Vision
Smart Device with information on your PC, such as Outlook content.
ActiveSync can also synchronize over a wireless or cellular network
with Microsoft Exchange Server, if your company or service provider is
running Microsoft Exchange Server with Exchange ActiveSync. When
you synchronize, ActiveSync compares the information on your PPC-
6700 with the information on your PC and/or Exchange Server and
updates all locations with the most recent information.
With ActiveSync, you can:
Synchronize data, such as Outlook E-mail, Contacts, Calendar,
or Tasks information on your PPC-6700 with your PC, as well as
pictures, video, and music.
Synchronize Outlook E-mail, Contacts, Calendar appointments,
and Tasks on your PPC-6700 directly with Exchange Server so
that you can stay up to date even when your PC is turned off.
Exchange files between your PPC-6700 and your PC
without synchronizing.
Select which types of information are synchronized and specify
how much information is synchronized. For example, you
can choose how many weeks of past Calendar appointments
to synchronize.
Before you can synchronize information with a PC, you must first
install ActiveSync on your PC and create a synchronization relationship
between your PPC-6700 and the PC. You can install ActiveSync from the
Getting Started disc that comes with your device. ActiveSync is already
installed on your PPC-6700.
Once you have installed ActiveSync and set up a synchronization
relationship, ActiveSync on the PC recognizes your device when you
connect it, and automatically transfers the synchronization settings
you specified on your PPC-6700.
You may be able to synchronize your device with Exchange Server
through your company or wireless service provider. If you plan to do so,
obtain the name of the Exchange Server, your user name, password,
and domain name from your administrator before starting the Sync
Setup Wizard.
Section 4: Synchronizing
46
To install and set up ActiveSync:
1. Install ActiveSync on your PC. After Setup completes, the
Sync Setup Wizard automatically starts when you connect
your device to the PC.
2. Follow the instructions on the screen to complete the
wizard. In the Sync Setup Wizard, do one or both of the
following:
Create a synchronization relationship between your PC
and the device.
Configure an Exchange Server connection to
synchronize directly with Exchange Server.
3. Choose information types to synchronize.
When you finish the wizard, ActiveSync synchronizes your
Note: device automatically. Once synchronization completes, you
can disconnect your PPC-6700 from your PC.
4.2 Synchronizing Information
When you connect your Sprint PCS Vision Smart Device to the
PC using a USB cable, an infrared connection, or a Bluetooth
connection, ActiveSync will immediately synchronize. While the
device is connected, ActiveSync synchronizes every time you make a
change on either the PC or the device.
Synchronize Outlook Information
If you have set up a synchronization relationship between your
PPC-6700 and the PC, synchronization keeps Outlook information
up-to-date in both your device and PC. ActiveSync synchronizes
a limited amount of information by default to save storage
space on your device. You can change the amount of information
synchronized for a given information type in Settings for the
information type.
Section 4: Synchronizing 47
You can set up your PPC-6700 to synchronize with more than
one PC or with a combination of one or more PCs and Exchange
Server. When synchronizing with multiple computers, the items
that you synchronize will appear on all of the computers with
which they are synchronized. For example, if you have set up
synchronization with two PCs (PC1 and PC2), which have different
items, and you synchronize Contacts and Calendar on the device
with both computers, the result is as follows:
Location
New state
All Outlook contacts and calendar appointments that
were on PC2 are now also on PC1.
PC1
All Outlook contacts and calendar appointments that
were on PC1 are now also on PC2.
PC2
All Outlook contacts and calendar appointments from
both PC1 and PC2 are on the device.
Device
Note: Outlook e-mail can be synchronized with only one computer.
To start and stop synchronization:
To synchronize Outlook information and other local
information on the PC, including media files, connect your
PPC-6700 to the PC using Bluetooth, infrared (IR), or a
cable or cradle.
If you are synchronizing directly with Exchange Server, you
can use this connection to the PC to “pass though” to the
network, or you can synchronize without connecting to
the PC over a cellular or Wi-Fi network.
In ActiveSync, tap Sync. To end synchronization before it
completes, tap Stop.
Section 4: Synchronizing
48
To change which information is synchronized:
1. In ActiveSync on the device, tap Menu > Options.
2. Do one or both of the following:
Select the check box for any items you want to
synchronize. If you cannot select a check box, you
might have to clear the check box for the same
information type elsewhere in the list.
Clear the check box for any items you want to stop
synchronizing.
3. To stop synchronizing with one PC completely, tap the PC,
and then tap Delete.
Outlook e-mail can be synchronized with only one computer.
Notes:
To change available synchronization settings, select the type
of information and tap Settings.
To synchronize directly with Exchange Server:
You can set up synchronization with Exchange Server on your
PPC-6700, if it is available to you through your company or
wireless service provider. However, you should first ask your
administrator for the following information and then carry
on with the steps: Exchange Server name, your user name,
password, and domain name.
1. In ActiveSync on the device, tap Menu > Configure Server.
If you have not yet set up synchronization with Exchange
Server, this will say Add Server Source.
2. In Server address, enter the name of the server running
Exchange Server, and then tap Next.
3. Enter your user name, password, and domain, and then
tap Next. To change the rules for resolving synchroniza-
tion conflicts, tap Advanced.
4. Select the check boxes for the types of information items
that you want to synchronize with Exchange Server.
Section 4: Synchronizing 49
5. To change available synchronization settings, select the
type of information, and then tap Settings.
6. Tap Finish.
4.3 Synchronizing Via Infrared
and Bluetooth
You can use local wireless technologies such as infrared (IR) and
Bluetooth to establish a connection and synchronize your PPC-6700
with your PC.
To synchronize with a PC via infrared:
1. Follow the instructions in ActiveSync Help on the PC for
setting up your PC to receive infrared beams.
2. Line up the infrared ports according to the instructions in
the manufacturer’s documentation for your PPC-6700, so
that they are unobstructed and within close range.
3. On the device, tap Start > Programs > ActiveSync.
4. Tap Menu > Connect via IR.
5. Tap Sync.
To synchronize with a PC via Bluetooth:
1. Follow the instructions in ActiveSync Help on the PC for
configuring Bluetooth on your PC to support ActiveSync.
2. On the device, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Make sure that
Bluetooth is turned on at the device and the PC, and that
they are within close range.
4. If this is the first time you have connected to this PC via
Bluetooth, you must first complete the Bluetooth wizard
on the device and set up a Bluetooth partnership between
your PPC-6700 and the PC.
Section 4: Synchronizing
50
For more information about enabling and configuring
Bluetooth, see Section 6.
You can also use the Sync Setup Wizard to set up the device
to synchronize remotely with Exchange Server. This wizard
is started when you connect your PPC-6700 to your PC after
Note:
installing ActiveSync on the PC.
4.4 Synchronizing Music, Video,
and Pictures
If you want to carry your music or other digital media along
with you while you travel, works with Windows Media Player
to synchronize music, video, and pictures with your Sprint PCS
Vision Smart Device. Other than selecting the Media information
type in ActiveSync to be synchronized, all media synchronization
settings must be set in Windows Media Player. Before media can be
synchronized, you must do the following:
Install Windows Media Player Version 10 on the PC.
Connect your PPC-6700 to the PC with a USB cable. If the
device is currently connected using Bluetooth or infrared, you
must end that connection before media can be synchronized.
Insert a miniSD card into your PPC-6700 (32MB or larger is
recommended).
Set up a sync partnership between the storage card and
Windows Media Player.
Section 4: Synchronizing 51
Change Media Synchronization Settings
Once you select the Media information type in ActiveSync to be
synchronized, any of your favorite music, video, and picture files
in Windows Media Player playlists can be synchronized. All you
have to do is set up synchronization in Windows Media Player for
those media files.
To set up a sync relationship with a storage card:
1. Open Windows Media Player.
2. Click the Sync tab.
3. Select the storage card.
4. Click Set up Sync.
For information about using Windows Media Player on the
device, see Section 8.
Section 4: Synchronizing
52
Section 5
Managing Your PPC-6700
In This Section
5.1 Personalizing Your Sprint PCS Vision
Smart Device
5.2 Adding and Removing Programs
5.3 Managing Memory
5.4 Backing Up Files
5.5 Protecting Your Sprint PCS Vision
Smart Device
5.6 Resetting Your Sprint PCS Vision
Smart Device
5.1 Personalizing Your Sprint PCS Vision
Smart Device
Today Screen Settings
The Today screen shows your upcoming appointments, active
tasks, and information about e-mail messages. You can customize
the Today screen on your PPC-6700.
To customize the Today screen:
1. Tap Start > Settings > Personal tab > Today.
2. On the Appearance tab, select the desired theme for the
background of the Today screen.
3. On the Items tab, select the items you want to appear on
the Today screen.
To change the order of items displayed on the Today screen,
Tip:
tap the item, and then tap Move Up or Move Down.
To add a custom background image:
You can use one of your own pictures as the background image
on the Today screen. Be aware that pictures can affect the
readability of text on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Select the Use this picture as the background check box,
and tap Browse to view a list of your picture files.
3. Tap the file name of the picture you want to use.
4. Tap OK.
54 Section 5: Managing Your PPC-6700
To set options for displaying appointments on the
Today screen:
If you have a large number of appointments, you may want
to specify the kind of appointments that are displayed on the
Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Calendar, and then tap Options.
4. Do any of the following:
Select Next appointment to show only the next
appointment in your schedule, or Upcoming
appointments to show multiple appointments.
Clear the Display all day events check box if you do not
want to display all-day events.
To set options for displaying tasks on the Today screen:
If you have a large number of tasks, you may want to specify
the kind of tasks that are displayed on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Tasks, and then tap Options.
4. Do any of the following:
Under Display number of, select the number of tasks
you want to appear on the Today screen.
In the Category list, select whether to display only
tasks assigned to a specific category or to display
all tasks.
Section 5: Managing Your PPC-6700 55
Customize the Start Menu
You can choose which items appear in the Start menu.
1. Tap Start > Settings > Personal tab >Menus.
2. Select the check boxes of the items you want to appear in
the Start menu. You can select up to seven items.
You can also create folders and shortcuts to appear on the
Start menu. In ActiveSync on your PC, click Explore. In the
Mobile Device window, double-click My Windows Mobile-
Based Device > Windows > Start Menu, and then create the
Tip:
folders and shortcuts that you want. You will see the added
items after you synchronize.
Set Up Date/Time/Language/Regional Options
You can set up the correct date, time, language, and regional
settings according to your use.
To set the time and date:
1. Tap Start > Settings > System tab > Clock & Alarms.
2. Select the correct time zone and change the date or time.
During synchronization, the time on your device is updated
with the time on your PC.
Note:
To set an alarm:
1. Tap Start > Settings > System tab > Clock & Alarms >
Alarm tab.
2. Tap <Description> and enter a name for the alarm.
56 Section 5: Managing Your PPC-6700
3. Tap the day of the week for the alarm. You can select
multiple days by tapping each desired day.
4. Tap the time to open a clock and set the time for
the alarm.
5. Tap the alarm icon (
) to specify the type of alarm you
want. You can choose a flashing light, a single sound, a
repeating sound, or vibration.
6. If you choose to play a sound, tap the list next to the Play
sound check box and tap the sound you want.
To set the time and date for a different location:
If you visit or communicate with someone in a particular time
zone often, you can select it as your visiting time zone.
1. Tap Start > Settings > System tab >Clock & Alarms.
2. Tap Visiting.
3. Select the correct time zone and change the time or date.
To change language and regional settings:
The style in which numbers, currency, dates, and times are
displayed is specified in Regional Settings.
1. Tap Start > Settings > System tab > Regional Settings.
2. On the Region tab, select your region and language.
3. The region you select determines which options will be
available on the other tabs.
4. To customize settings further, tap the appropriate tabs
and select the desired options.
Section 5: Managing Your PPC-6700 57
Personal and System Settings
Your Sprint PCS Vision Smart Device may come with programs
already assigned to hardware buttons. You can customize these
buttons to open the programs you use most, or to perform
certain shortcuts such as changing the screen orientation,
opening the Today screen, or opening Input Panel.
To reassign programs or shortcuts to program buttons:
1. Tap Start > Settings > Personal tab > Buttons.
2. A list of buttons and their current assignments is
displayed on the Program Buttons tab.
3. Tap the button you want to reassign. To help you identify
the buttons, there are numbers and icons representing
the original function of the button.
4. In the Assign a program box, tap the program or shortcut
you want to assign.
5. Tap OK.
To increase or decrease the size of text on the screen:
1. Tap Start > Settings > System tab >Screen >Text Size.
2. Move the slider to increase or decrease the text size.
To enter owner information:
1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Identification tab, enter your personal information.
Entering and displaying owner information are best practices;
Note:
they allow someone to return the device to you in case it is lost.
If the owner information is displayed on the Today screen, you
can open and edit the information directly from the Today
screen. Just tap that section of the screen.
Tip:
58 Section 5: Managing Your PPC-6700
To choose how to be notified about events or actions:
1. Tap Start > Settings > Personal tab > Sounds & Notifications.
2. On the Sounds tab, choose how you want to be notified
by selecting the appropriate check boxes.
3. On the Notifications tab, in Event, tap an event name
and choose how you want to be notified by selecting
the appropriate check boxes. You can choose from
several options, such as a special sound, a message, or
a flashing light.
Turning off sounds and the flash light helps conserve
battery power.
Tip:
To adjust the speed for scrolling:
Pressing and holding NAVIGATION up or down scrolls through
the items in a list.
1. Tap Start > Settings > Personal tab >Buttons > Up/Down
Control tab.
2. Do one of the following:
Under Delay before first repeat, move the slider to
shorten or lengthen the time that elapses before
scrolling begins.
To change the time it takes to scroll from one item to
the next, under Repeat rate, move the slider to adjust
the speed.
To find the operating system version number and
detailed device information:
Tap Start > Settings > System tab > About.
The Version tab displays the operating system information and
important device information, including the type of processor
and the amount of memory that is installed.
Section 5: Managing Your PPC-6700 59
To change the device name:
1. Tap Start > Settings > System tab >About > Device ID tab.
2. Enter a name:
The device name must begin with a letter, consist of letters
from A to Z, numbers from 0 to 9, and cannot contain spaces.
Use the underscore character to separate words.
Why is the device name important?
The device name is used to identify the device in the following
situations:
Synchronizing with a PC.
Connecting to a network.
Restoring information from a backup.
If you synchronize multiple devices with the same PC, each
device must have a unique name.
Note:
To make the battery last longer:
The device battery power lasts based on the battery type and
how you use your PPC-6700. Try the following to help preserve
battery life:
Tap Start > Settings > System tab > Power. On the
Advanced tab, you can specify when your device turns off
to conserve battery power. For optimum conservation,
specify 3 minutes or less.
Use the AC adapter to plug your device into external
power whenever possible, especially when using a miniSD
card or when using a modem or other peripherals.
Adjust the backlight settings.
60 Section 5: Managing Your PPC-6700
To adjust the brightness of the backlight:
1. Tap Start > Settings > System tab >Backlight >
Brightness tab.
2. Move the sliders right to increase and left to decrease
the brightness:
To set the backlight to dim after a time delay:
1. Tap Start > Settings > System tab > Backlight.
2. Tap the Battery Power tab or the External Power tab.
3. Select the Turn off backlight if device is not used for check
box, and specify the time delay.
Phone Settings
You can customize phone settings, such as the ring type and ring
tone to be used for incoming calls, and the keypad tone to be
used when entering phone numbers.
To change the ring tone:
1. Tap Start > Settings > Personal tab >Phone > Phone tab.
2. In the Ring tone list, tap the sound you want to use.
To use custom *.wav, *.mid, or *.wma files as ring tones, use
ActiveSync on your PC to copy the file to the /Windows/Rings
Tip:
folder on your device. Then, select the sound from the Ring
tone list. For more information about copying files to your
device, see ActiveSync Help on your PC.
Section 5: Managing Your PPC-6700 61
To change the ring type:
You can change the way that you are notified of incoming
calls. For example, you can choose to be notified by a ring, a
vibration, or a combination of both.
1. Tap Start > Settings > Personal tab >Phone > Phone tab.
2. In the Ring type list, tap the desired option.
To change the keypad tone:
You can change the tone you hear when entering a phone
number on the keypad. If set to Long tones, the tone is heard
continuously for as long as the number on the keypad is
pressed. Use this setting if you are having trouble completing
tasks that rely on tones from your phone, such as accessing
messages from an answering machine. If set to Short tones,
the tone is heard only for one or two seconds. If set to Off, no
tone will be heard.
1. Tap Start > Settings > Personal tab > Phone > Phone tab.
2. In the Keypad list, tap the desired option.
Phone Services
More services (including Location Setting, Voice Privacy, Network
Service, TTY Mode, and Alert) are provided online, which enable
you to use the add-on value services for your PPC-6700.
To choose the services:
1. Tap Start > Settings > Personal tab >Phone > Services tab.
2. Tap the service you want to use, and then tap
Get Settings.
62 Section 5: Managing Your PPC-6700
5.2 Adding and Removing Programs
Before purchasing additional programs for your Sprint PCS Vision
Smart Device, you should note the name of your device, the
version of Windows Mobile software running on it, and the type
of processor. This information will help you select a program that
is compatible with your PPC-6700. For more information, see “To
get detailed device information” and “To find the operating system
version number” in this section.
Programs available for purchase usually include a Setup program
(commonly named “setup.exe”) that you must first install on your
PC. You can then use ActiveSync to add programs to your PPC-6700,
or add a program directly from the Internet.
To add programs:
1. Download the program to your PC (or insert the CD or
disk that contains the program into your PC). You may see
a single *.exe file, a *.zip file, a Setup.exe file, or several
versions of files for different device types and processors.
Be sure to select a program designed for your device and
processor type.
2. Read any installation instructions or documentation that
comes with the program. Many programs provide special
installation instructions.
3. Connect your PPC-6700 and PC.
4. Double-click the *.exe file.
If the executable file is an installation wizard, follow
the instructions on the screen. Once the program
has been installed on your PC, the wizard will
automatically transfer the program to your PPC-6700.
If an installation wizard does not start, you will see an
error message stating that the program is valid but
that it is designed for a different type of computer.
You will need to copy this program to your device. If
you cannot find any installation instructions for the
program, use ActiveSync to copy the program file to
the Program Files folder on your PPC-6700.
Section 5: Managing Your PPC-6700 63
To remove programs:
You can only remove programs that you installed. Programs
that have been pre-loaded onto your PPC-6700 cannot be
removed.
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the
program you want to remove, and then tap Remove.
3. Tap Yes. If another confirmation message appears, tap
Yes again.
5.3 Managing Memory
You may need to stop a program if it becomes unstable or the
program memory is low.
To see how much memory is available:
Tap Start > Settings > System tab > Memory. On the Main
tab, the amount of memory allocated to file and data
storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see available storage card memory:
You can see how much memory is available on a storage card
that is inserted in the device.
1. Tap Start > Settings > System tab >Memory.
2. Tap the Storage Card tab.
If you have previously inserted more than one storage card,
Tip:
tap the list box and then the storage card whose information
you want to see.
64 Section 5: Managing Your PPC-6700
To free up program memory:
Try the following to free memory on the device:
Close programs you are not currently using.
Move e-mail attachments to a storage card.
Move files to a storage card. Tap Start > Programs > File
Explorer. Tap and hold the file, and then tap Cut. Browse
to the storage card folder and tap Edit > Paste.
Delete unnecessary files. Tap Start > Programs > File
Explorer. Tap and hold the file, and then tap Delete.
Delete large files. To find your largest files, tap Start >
Programs > Search. In the Type list, tap Larger than 64 KB,
and then tap Search.
In Internet Explorer Mobile, delete temporary Internet
files and clear history information. For more information,
see “Internet Explorer Mobile” in Section 6.
Remove programs you no longer use.
Reset your Sprint PPC-6700. (See “Resetting Your
Sprint PCS Vision Smart Device” on page 70.)
To close a program:
In most cases, programs automatically close to free needed
memory; however, you can close programs manually, if
you prefer.
1. Tap Start > Settings > System tab >Memory > Running
Programs tab.
2. In the Running Programs list, tap the program you want to
close, and then tap Stop.
In most programs, you can also use the keyboard shortcut
CTRL+Q to close the program.
Tip:
Section 5: Managing Your PPC-6700 65
5.4 Backing Up Files
You can back up files to your PC using ActiveSync, or copy files to a
storage card installed in the device. Your PPC-6700 has an expansion
slot compatible with a range of mini secure digital (miniSD) storage
cards.
Using ActiveSync, you can copy or move information from the PC
to the device and vice versa. Changes you make to the information
on one computer will not affect the information on the other
computer. If you want to automatically update information on
both your PPC-6700 and PC, synchronize the information instead.
For more information about copying and synchronizing files, see
ActiveSync Help on your PC.
To copy files to a storage card:
1. Push the storage card into the storage card slot until
it clicks into place. The card is secure when it does not
protrude from the base.
2. Tap Start > Programs > File Explorer and navigate to the
appropriate folder.
3. Tap and hold the desired file, and then tap Copy.
4. Tap the folder list (labeled My Documents by default), and
then tap Storage Card.
5. Tap Menu > Edit > Paste.
To copy a file using ActiveSync:
Copying a file results in separate versions of a file on your
PPC-6700 and PC. Because the files are not synchronized,
changes made to one file will not affect the other.
1. Connect your PPC-6700 to your PC.
2. In ActiveSync, click Explore to open the Mobile Device
window for your PPC-6700.
66 Section 5: Managing Your PPC-6700
3. In the Mobile Device window, go to the file that you want
to copy on your PPC-6700 or PC.
4. Do one of the following:
To copy the file to your device, right-click the file and
click Copy. Then, right-click the desired folder under
Mobile Device, and click Paste.
To copy the file to your PC, right-click the file and click
Copy. Then, right-click the desired folder on your PC,
and click Paste.
To automatically save files on a storage card:
In the Word Mobile, Excel Mobile, and Notes programs, you
may find it helpful to save all new documents, notes, and
workbooks directly on a storage card.
1. From the program file list, tap Menu > Options.
2. With a storage card inserted in the device, in the Save to
box, tap the appropriate storage card to automatically
save new items on the storage card.
3. Tap OK.
In the file or note list, a storage card symbol is displayed next
Note:
to the names of files saved on a storage card.
Section 5: Managing Your PPC-6700 67
5.5 Protecting Your Sprint PCS Vision
Smart Device
You can prevent unauthorized access to any part of the device by
using password protection. You create your own password when
you begin using your PPC-6700.
To protect your device with a password:
You can help keep your data more secure by requiring a
password every time the device is turned on.
1. Tap Start > Settings > Personal tab > Password.
2. Select the Prompt if device unused for check box, and in
the box to the right, select how long your device must be
turned off before a password is required. In the Password
type box, select the type of password you would like to
use. Enter the password and, if necessary, confirm the
password. If your device is configured to connect to a
network, use a strong password to help protect
network security.
3. On the Hint tab, enter a phrase that will help you
remember your password, but doesn’t allow others to
guess your password. The hint will be displayed after an
incorrect password is entered four times.
4. Tap OK.
The next time the device is turned on, you will be prompted to
enter your password.
Each time an incorrect password is entered, the time the
device takes to respond will get longer and longer until the
device appears to be not responding.
Notes:
If you forget your password and cannot access your device
anymore, please contact your local authorized dealer to
clear memory.
68 Section 5: Managing Your PPC-6700
To change your password:
1. Tap Start > Settings > Personal tab > Password. You will be
prompted to enter your current password.
2. In the Password box, enter your new password.
3. On the Hint tab, enter a phrase that will help you
remember your new password, but doesn’t allow others
to guess your password. The hint will be displayed after
the wrong password is entered four times.
4. Tap OK.
To display owner information on the Today screen:
Having your contact information displayed on the Today screen
on startup allows for easy identification of the device in case
it is lost.
1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Options tab, select the Identification information
check box.
3. On the Options tab, select the Notes check box if you
want additional text displayed, such as: Reward if found.
When you select the check box, you need to enter the
additional text on the Notes tab.
To display owner information on the Today screen, tap Start >
Tip:
Settings > Personal tab > Today. On the Items tab, select the
Owner Info check box.
Section 5: Managing Your PPC-6700 69
5.6 Resetting Your Sprint PCS Vision
Smart Device
Occasionally you may need to reset your Sprint PCS Vision Smart
Device. A normal (or soft) reset of your PPC-6700 clears all active
program memory and shuts down all active programs. This can be
useful when the device is running slower than normal, or a program
is not performing properly. A soft reset is also necessary after the
installation of some programs. If a soft reset is performed when
programs are running, unsaved work will be lost.
You can also perform a hard reset (also known as a full reset). A hard
reset should be performed only if a normal reset does not solve
a system problem. After a hard reset, the device is restored to its
default settings — the way it was when you first purchased it and
turned it on. Any programs you installed, data you entered, and
settings you customized on the device will be lost. Only Windows
Mobile software and other pre-installed programs will remain.
To perform a soft reset:
Use the stylus to lightly press and hold the RESET button
on the bottom of your PPC-6700. The device restarts, and
then displays the Today screen.
RESET button
To avoid data lost, please turn off your device before
performing a soft reset.
Tip:
To perform a hard reset:
1. Press and hold both SOFT KEYs on the device. Keep these
keys pressed, and at the same time, use the stylus to
lightly press and hold the RESET button on the bottom of
your device.
2. Press either Y to restore to factory default, or N to exit the
hard reset process.
70 Section 5: Managing Your PPC-6700
Section 6
Getting Connected
In This Section
6.1 Connecting to the Internet
6.2 Internet Explorer Mobile
6.3 Using Bluetooth
6.4 Using Wireless Modem
6.5 Using Wireless Manager
6.6 Using Terminal Services Client
6.1 Connecting to the Internet
Your Sprint PCS Vision Smart Device is equipped with powerful
networking functions that enable you to connect to the Internet.
You can set up connections to the Internet or to a corporate network
to browse the Internet, and exchange e-mail or instant messages.
Your PPC-6700 has two groups of connection settings: Sprint and
My Work Network. The Sprint settings are used to connect to the
Internet, while My Work Network settings can be used to connect
to any private or corporate network. Simply fill in the settings and
you’ll be ready to start connecting.
To connect to the Internet via Sprint:
1. Obtain the following information from Sprint:
ISP server phone number.
User name.
Password.
2. Tap Start > Settings > Connections tab > Connections.
3. Tap Add a new modem connection.
4. Enter a name for the connection, and then select a
modem from the list box.
For example, if you want to use the mobile phone
network, select Cellular Line.
5. Tap Next.
6. Complete the connection wizard by entering the required
information. Then, tap Finish.
To view additional information for any screen,tap Help.
To modify your connection settings, tap Manage existing
connections on the Connections screen, and complete the
Tips:
connection wizard.
Section 6: Getting Connected
72
To connect to a private network:
1. Obtain the following information from your network
administrator:
Server phone number.
User name.
Password.
Domain (provided by the network administrator).
2. Tap Start > Settings > Connections tab > Connections.
3. In My Work Network, follow the instructions for each type
of connection.
4. Complete the connection wizard, and then tap Finish.
To start browsing the Internet:
When the connection settings are completed, tap Start >
Programs > Internet Explorer.
To reset or modify the network card settings:
1. Tap Start > Settings > Connections tab > Network Cards.
2. In the My network card connects to list, select the
appropriate item:
If you want to connect to the Internet using your ISP,
select The Internet.
If you want to connect to a private network,
select Work.
3. In Tap an adapter to modify settings, tap the appropriate
adapter. The fields on the IP Address tab are
populated automatically.
4. Configure the TCP/IP settings (if required). If your ISP
or private network does not use dynamically-assigned
IP addresses, tap Use specific IP address and enter the
requested information. Contact your ISP or network
administrator to obtain the IP address, subnet mask,
and/or default gateway.
Section 6: Getting Connected
73
5. Configure the DNS and WINS settings (if required). If your
ISP or private network does not use dynamically-assigned
IP addresses, enter the requested information on the
Name Servers tab. Servers that require an assigned IP
address may also require a way to map computer names
to IP addresses. DNS and WINS are the resolution options
supported on your PPC-6700.
6.2 Internet Explorer Mobile
Internet Explorer Mobile is a full-featured Internet browser, which is
optimized for use on your mobile device.
To start Internet Explorer Mobile:
Tap Start > Programs > Internet Explorer.
To choose a Home page:
1. In Internet Explorer Mobile, tap Menu > Tools > Options >
General tab.
2. Do one of the following:
Tap Use Current to use the displayed page as your
Home page.
Tap Use Default to use the default Home page.
Tip:
To go to your Home page, tap Menu > Home.
To transfer favorites from your PC:
You can transfer the favorites you have stored on your PC to
your PPC-6700 by synchronizing the Internet Explorer favorites
on your PC with your PPC-6700.
1. In ActiveSync on your PC, click Tools > Options, and then
select Favorites.
Section 6: Getting Connected
74
2. In Internet Explorer on your PC, save or move favorite links
to the Mobile Favorites subfolder in the Favorites list.
3. Connect your mobile device to your PC. If synchronization
does not start automatically, click Sync.
Use Internet Explorer Mobile
In Internet Explorer Mobile, you can operate any of the
following functions:
To change the size of text on Web pages:
Tap Menu > Zoom, and then tap the size you want.
To add a favorite:
1. Go to the page you want to add.
2. Tap and hold the page, and then tap Add to Favorites.
3. Confirm or change the name, and select a folder for
storing the favorite.
To delete a favorite or folder:
1. Tap Menu > Favorites > Add/Delete tab.
2. Select the desired item, and then tap Delete.
To change how Web pages fill the screen:
1. Tap Menu > View.
2. Do one of the following:
One Column. Arranges the content into one column
that is as wide as the screen. This means that you will
rarely have to scroll horizontally.
Default. Maintains a layout similar to what you see on
a desktop computer, but it makes items smaller and
arranges the content so that you can see most of it
without having to scroll horizontally.
Section 6: Getting Connected
75
Desktop. Keeps the same layout and size as on a
desktop computer, which will require both horizontal
and vertical scrolling.
To show or hide pictures on Web pages:
Tap Menu > View > Show Pictures. A check mark next to
Show Pictures indicates that pictures will be displayed on
Web pages.
To save a picture from a Web page:
1. Tap and hold the picture, and then tap Save Image.
2. Do one of the following:
To save the picture in My Pictures on your PPC-6700,
tap Yes.
To save the picture in another location, such as a
storage card, tap Save As.
To clear the History list:
1. Tap Menu > Tools > Options > Memory tab.
2. Tap Clear History.
To change cookies and security settings:
Internet Explorer Mobile supports the protocols used by Secure
Sockets Layer (SSL). A connection that uses SSL helps you to
send personal information more safely.
Cookies are small files containing information about your
identity and preferences so that a page can tailor information
to your needs. The page sends the file, and it is stored on your
mobile device.
1. Tap Menu > Tools > Options > Security tab.
2. Select the check boxes for the options you want, and then
tap OK.
Section 6: Getting Connected
76
To prevent Internet Explorer Mobile from accepting any cook-
ies, clear the Allow cookies check box.
Tip:
To delete temporary Internet files:
Some Web content is stored as you view it to speed up the
display of pages you frequently visit or have already seen. You
may want to delete these files to free storage space.
1. Tap Menu > Tools > Options > Memory tab.
2. Tap Delete Files. All pages stored on your device, including
offline favorites content, will be deleted.
6.3 Using Bluetooth
Bluetooth is a short-range wireless communications technology.
Devices with Bluetooth capabilities can exchange information
over a distance of about 10 meters without requiring a physical
connection. You can even beam information to a device in a
different room, as long as it is within range.
The software included with your Sprint PCS Vision Smart Device
allows you to use Bluetooth in the following ways:
Beam information, such as files, appointments, tasks, and
contact cards, between devices that have
Bluetooth capabilities.
Create a dial-up modem connection between your PPC-6700
and a Bluetooth-enabled phone, and then beam information
using the Bluetooth phone as a modem.
To turn Bluetooth on or off:
1. On your PPC-6700, tap Start > Settings > Connections
tab > Bluetooth.
Section 6: Getting Connected
77
2. Select the Turn on Bluetooth and Make this device
discoverable to other devices check boxes.
3. Tap OK.
To add an extra layer of security while beaming information
Note: with other devices, or to set up Bluetooth synchronization, tap
Start > Settings > System tab > Bluetooth Setting.
Bluetooth Modes
Bluetooth on your Sprint PCS Vision Smart Device operates in
three different modes:
On. Bluetooth is turned on and you can use
Bluetooth features.
Off. Bluetooth is turned off. In this mode, you can neither
send nor receive information using Bluetooth. You might
want to turn the phone off at times in order to conserve
battery power, or in situations where phone use is prohibited,
such as onboard an aircraft and in hospitals.
Discoverable. Bluetooth is turned on, and all other Bluetooth-
enabled devices within a range of 10 meters can detect
your device.
By default, Bluetooth is turned off. If you turn it on, and then
Note: turn off your device, Bluetooth also turns off. When you turn
on your device again, Bluetooth automatically turns on.
To make your PPC-6700 discoverable:
1. On your device, tap Start > Settings > Connections
tab > Bluetooth.
2. Select the Turn on Bluetooth and Make this device
discoverable to other devices check boxes.
3. Tap OK.
Section 6: Getting Connected
78
Bluetooth Partnerships
A Bluetooth partnership is a relationship that you create
between your PPC-6700 and another Bluetooth-enabled device
in order to exchange information in a secure manner. Creating
a partnership between two devices involves entering the same
personal identification number (PIN) on both devices. Creating a
partnership between two devices is a one-time process. Once a
partnership is created, the devices can recognize the partnership
and exchange information without entering a PIN again. Make
sure the two devices are within a range of 10 meters from one
another, and Bluetooth is turned on and in discoverable mode.
To create a Bluetooth partnership:
1. On your PPC-6700, tap Start > Settings > Connections
tab > Bluetooth.
2. On the Devices tab, tap New Partnership. Your PPC-6700
will search for other Bluetooth devices and displays them
in the box.
3. Tap the desired device name in the box.
4. Tap Next.
5. Enter a passkey to establish a secure connection. The
passkey must be between 1 and 16 characters.
6. Tap Next.
7. Enter the same passkey on the other device. You can,
however, edit and enter a new name for the other device.
Then, tap Finish.
To accept a Bluetooth partnership:
1. Ensure that Bluetooth is turned on and in
discoverable mode.
2. Tap OK when prompted to establish a partnership with
the other device.
Section 6: Getting Connected
79
3. Enter a passkey (the same passkey that is entered on the
device requesting the partnership) to establish a secure
connection. The passkey must be between 1 and
16 characters.
4. Tap Next, and then Finish. You can now exchange
information with the other device.
To rename a Bluetooth partnership:
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Edit.
4. Enter a new name for the partnership.
5. Tap Finish.
To delete a Bluetooth partnership:
1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Delete.
Beam Information Using Bluetooth
1. On the device, tap and hold an item to beam. The item
can be an appointment in your calendar, a task, a contact
card, or a file.
2. Tap Beam [type of item].
3. Tap the device name to which you want to send the item.
If the device you want to beam to does not appear in the box,
Note: make sure that it is turned on, discoverable, and within close
range (10 meters) of your device.
Section 6: Getting Connected
80
Use a Bluetooth Device as a Modem
You can use a phone that has Bluetooth capabilities as a modem
for your PPC-6700.
To do so, create a Bluetooth modem connection on your
PPC-6700 and then send information to another device by using
Bluetooth. The device relays the information over the network
and then sends back to your device any information that you
had requested over the connection. Once you create a modem
connection to the Bluetooth phone, you can reuse it whenever
you want to use the phone as a modem. Make sure that your
PPC-6700 and the destination device are turned on, Bluetooth is
turned on, and that the devices are within close range.
To accept a Bluetooth partnership:
1. On your PPC-6700, tap Start > Settings > Connections
tab > Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection. In the Select a modem list
box, select Bluetooth. Then, tap Next.
4. If the device appears in the My Connections list, skip to
step 9.
5. If the device does not appear in the My Connections list,
tap New Partnership, and follow the remaining steps.
6. Select the device name from the list, and then tap Next.
7. Enter a passkey, and then tap Next.
8. Enter the same passkey on the device, and then tap Finish.
9. Select the device in the My Connections list, and then
tap Next.
10. Enter the phone number to dial for this connection, and
then tap Next.
11. Enter the required logon information for this connection,
and then tap Finish.
You can start using this service for the program that uses the
Bluetooth connection, such as Inbox on your PPC-6700, to send
and receive e-mail, or Internet Explorer to browse the Web.
Section 6: Getting Connected
81
6.4 Using Wireless Modem
Wireless Modem activates your Sprint PCS Vision Smart Device as a
wireless modem and lets you connect your PC to a wireless network.
Before you create and configure a new modem using a connection,
you must install the drivers on your PC.
To establish a connection using Wireless Modem:
1. On your PPC-6700, tap Start > Programs >
Wireless Modem.
2. In the Connection Type list, select IrDA. This allows you to
connect your PPC-6700 via infrared to a PC.
3. Tap Start.
Set Up Your PC
Before you start using Wireless Modem with an IrDA connection,
you must configure a new modem on your PC and obtain the
Username and Password from your Internet service provider (ISP).
To configure a modem on your PC:
1. On your PC, select Start > Settings > Control Panel.
2. Double-click Phone and Modem Options.
3. On the Modems tab, click Add.
4. Select the Don’t detect my modem; I will select it from a
list check box.
5. In the Manufacturers list, select Standard Modem Types.
6. Select Standard 33600 bps Modem, and then click Next.
7. Select the modem port on which you want to install
the drivers.
8. Click Next.
9. Click Finish. Now, when you check the Modems tab in
the Phone and Modem Options dialog box, a Standard
33600 bps Modem appears in the modem list.
Section 6: Getting Connected
82
10. Select Standard 33600 bps Modem.
11. Click Properties.
12. Click Change Default Preferences.
13. On the General tab, select Float control to None.
14. Click OK until the modem installation wizard exits.
To create a new dial-up connection:
After a new standard modem has been set up on your PC, you
must create a new dial-up connection.
1. On your PC, select Start > Settings > Control Panel.
2. Double-click Network and Dial-up Connections.
3. Double-click Make New Connection.
4. Click Next to continue.
5. Click Dial-up to the Internet.
6. Click Next.
7. Click I want to set up my Internet connection manually,
or I want to connect through a local area network (LAN),
and then click Next.
8. Click I connect through a phone line and a modem,
and then click Next.
9. Select the Use area code and dialing rules check box.
10. Enter the telephone number as #777, and then click
Next.
11. Enter the user name and password you use to log on to
your ISP, and then click Next.
12. Enter a name for this connection, and then click Next.
13. Select No when the installation wizard prompts you to
set up an Internet mail account, and then click Next.
14. Click Finish to exit the wizard.
Section 6: Getting Connected
83
Connect Through a USB Port
To connect through a USB port, you need to first set up a USB
modem on your PC. Before setting up a USB modem, verify that
you have the following files:
PPC6700SP by Sprint Dialer.exe
PPC6700SP by Sprint.INF
Both files are available on the Getting Started CD. Run the
Getting Started CD from the CD-ROM of your PC and do the
following on your PPC-6700:
1. On your PPC-6700, tap Start > Programs > Wireless Modem.
2. Select USB as the connection type, and insert the USB
cable adapter.
3. Tap Start on the Wireless Modem screen of your PPC-6700.
The “Found New Hardware” message appears on your PC.
4. On your PC, select Display a list of the known drivers for this
device so that I can choose a specifific driver, and then
click Next.
5. Select Modem in the Hardware types list, and then click
Next.
6. Click Next.
7. Click Have Disk.
8. Click Next.
9. Select the recognized USB Modem from the Modems list.
10. Click Next.
11. Click Finish.
12. On your PC, select Start > Settings > Control Panel.
13. Double-click Phone and Modem Options.
14. Select the new USB modem from the Modems list.
15. Double-click the PPC6700SP by Sprint Dialer.exe file on the
Getting Started CD.
Section 6: Getting Connected
84
16. Enter the related network settings (assigned by your ISP).
17. Click Dial to start the connection.
18. Click Finish to exit the wizard.
Once you set up a USB modem on your PC, you are ready to
establish a connection using Wireless Modem via a USB port.
To establish a connection using Wireless Modem via a
USB port:
1. On your PPC-6700, select Start > Programs >
Wireless Modem.
2. In Connection Type, select USB.
3. Tap Start.
To establish a connection using Wireless Modem via
Bluetooth:
1. On your PC, select Start > Programs > Wireless Modem.
2. In Connection Type, select Bluetooth.
3. Click Start.
Section 6: Getting Connected
85
6.5 Using Wireless Manager
Wireless Manager allows you to manage
phone service, Wi-Fi Internet connections,
and Bluetooth on your Sprint PCS Vision
Smart Device. You can use the device’s
Power Save Mode to make optimal use of
the battery under the WLAN networking
environment, view a variety of data related
to the current configuration and signal
quality, and increase network security.
To run Wireless Manager on your PPC-6700, you need a broadband
Internet connection, and an access point or router that emits WLAN
signals. If you do not have access to broadband Internet, consult
your ISP before you try to run this utility.
The availability and range of your device’s WLAN signal
Note: depends on the number, infrastructure, and other objects
through which the signal passes.
To connect to a Wi-Fi network:
1. Tap Start > Programs > WirelessMgr. This opens the
Wireless Manager screen.
2. Tap the On/Off button to turn the wireless function on or
off. The Wireless Manager icon indicates the
wireless status:
: Wi-Fi is turned on.
: Wi-Fi is turned off.
3. On the Wireless Manager screen, tap Settings > Wireless
LAN Settings to configure the required settings. When the
configuration is completed, you can connect to a Wi-Fi
network using your PPC-6700.
Section 6: Getting Connected
86
Tap the Network Cards icon (
) on the Wireless LAN
Note:
Settings screen to configure wireless networks and network
adapters.
To save battery power while connected to a
Wi-Fi network:
1. On the Settings tab of the Wireless LAN Settings screen,
move the Power Save Mode slider to a position that
optimizes performance with the least
power consumption.
2. Select the Auto turn off WLAN if not connected check box
to allow your PPC-6700 to turn off the WLAN function
automatically when no signal is detected.
To increase security of the Wi-Fi network:
The LEAP (Lightweight Extensible Authentication Protocol)
feature of Wireless Manager increases security on your device,
and ensures that nobody is able to access your network
without your permission.
1. On the Wireless Manager Settings screen, tap the
LEAP tab.
2. Tap New. By default, the LEAP screen displays data that
you entered previously. However, you can modify or delete
the data as required by tapping Modify or Delete.
3. Enter the SSID (Service Set Identifier), user name,
password, and domain.
4. Select an Authentication Type. By default, the setting for
your device is Open System
For LEAP to work correctly, both the access point and the re-
Note: ceiving device (your device) must be set with the same SSID,
user name, and password.
Section 6: Getting Connected
87
Check for a Wireless LAN Signal
You can check the current wireless connection status from the
following three screens of your PPC-6700:
Today screen. If your device detects
a WLAN network connection, the
WLAN connection icon ( ) appears
at the top of the Today screen.
Wireless LAN Main screen. The
current connection status and signal
quality for each specific wireless
channel appears on the Wireless
Manager screen with the
current configuration.
Configure Wireless Networks screen.
This screen displays the wireless
networks currently available, and
allows you to add new ones
if available.
Section 6: Getting Connected
88
6.6 Using Terminal Services Client
Terminal Services Client allows you to log on to a PC running
Terminal Services or Remote Desktop, and use all the resources
available on that PC. For example, instead of running Word Mobile
on your PPC-6700, you can run the PC version of Word and access
the *.doc files available on that PC.
To connect to a Terminal Server:
1. On your PPC-6700, tap Start > Programs > Terminal
Services Client.
2. Enter the server name.
3. You can also select a server name in Recent servers if you
have recently connected to a server.
4. Select the Limit size of server desktop to fit on this screen
check box if you want to use programs that have been
specifically sized for use with your device.
5. Tap Connect.
Navigate Within Terminal Services Client
When connected to a remote server, you may notice that the
device's screen is displaying more than one horizontal and
vertical scroll bar. Use these scroll bars to either scroll the
contents on the PC, or to scroll the PC display through the
Terminal Services Client window. To make sure you are scrolling
the PC display through Terminal Services Client, use the five
directional buttons at the bottom of the Terminal Services Client
window. To better fit information on the device's screen, select
the Limit size of server desktop to fit on this screen check box. For
best results, the programs on your desktop PC should
be maximized.
Section 6: Getting Connected
89
To disconnect without ending a session:
1. From the Terminal Services Client screen on the device,
tap Start > Shutdown.
2. Tap Disconnect.
Do not use the Start menu on your device.
If a network administrator has configured Terminal Services
Client on your device to reconnect to disconnected sessions,
and you previously disconnected from a Terminal Server
without ending the session, the Terminal Services Client
reconnects to that session.
Notes:
To disconnect and end a session:
1. From the Terminal Services Client screen on your device,
tap Start > Shutdown.
2. Tap Log off.
Section 6: Getting Connected
90
Section 7
Exchanging Messages
In This Section
7.1 E-mail and Text Messages
7.2 Pocket MSN Messenger
7.3 Calendar
7.4 Contacts
7.5 Tasks
7.6 Notes
7.1 E-mail and Text Messages
Messaging is where all of your e-mail accounts and your text
message account are located. You can send and receive Outlook e-
mail, Internet e-mail through an Internet service provider (ISP), and
text messages. You can also access e-mail from work using a VPN
connection. For more information about e-mail and text messages,
see Help on the device.
To set up an e-mail account:
You need to set up an e-mail account that you have with an
Internet service provider (ISP) or an account that you access
using a VPN server connection (typically a work account) before
you can send and receive mail.
1. Tap Start > Messaging.
2. Tap Menu > Tools > New Account.
3. Enter your e-mail address, and then tap Next. Auto
configuration attempts to download necessary e-mail
server settings so that you do not need to enter
them manually.
4. Once Auto configuration has finished, tap Next.
5. Enter your name (the name you want displayed when you
send e-mail), user name, and password; then, tap Next.
Select the Save Password check box if you want to save
your password so that you do not need to enter it again.
If Auto configuration was successful, the Your name and User
name fields automatically get populated. Tap Next and then
Finish to complete setting up your account, or tap Options to
access additional settings. For example:
Change the time intervals for downloading
new messages.
Limit the amount of messages that are downloaded and
authentication method for outgoing mails.
Download attachments or parts of messages.
92
Section 7: Exchanging Messages
If Auto configuration is unsuccessful or you have an account
you access using a VPN server connection, contact your ISP or
network administrator for the following information and enter
it manually:
Setting
Description
Enter the user name assigned to you by your
ISP or network administrator. This is often
the first part of your e-mail address, which
appears before the at sign (@).
User name
Choose a strong password. You have the
option to save your password so you do not
need to enter it each time you connect to
your e-mail server.
Password
Not required for an account with an ISP. May
be required for a work account.
Domain
Account type
Select POP3 or IMAP4.
Enter a unique name for the account, such
as Work or Home. This name cannot be
changed later.
Account name
Incoming mail
server
Enter the name of your e-mail server (POP3
or IMAP4).
Outgoing mail
server
Enter the name of your outgoing e-mail
server (SMTP).
Select this to ensure that you always
send e-mail from this account using an
SSL connection. This enables you to send
personal information more securely. Note
that if you select this and your ISP does not
support an SSL connection, you will not be
able to send e-mail.
Require SSL
connection
Outgoing mail
requires
authentication
Select this if your outgoing e-mail server
(SMTP) requires authentication. Your user
name and password from above will be used.
Section 7: Exchanging Messages
93
Select this if your outgoing e-mail server
requires a different user name and password
than the ones you entered before.
Use separate
settings
Outgoing server settings:
Enter your user name for the outgoing
e-mail server.
User name
Password
Domain
Enter your password for the outgoing
e-mail server.
Enter the domain of the outgoing e-mail
server.
Select this to ensure you always send e-mail
from this account using an SSL connection.
This enables you to send personal
information more securely. Note that if you
select this and your ISP does not support an
SSL connection, you will not be able to send
e-mail.
Require SSL for
outgoing mail
You can set up several e-mail accounts in addition to your
Outlook Email account.
Tip:
To compose and send a message:
1. In the message list, tap Menu > Switch Accounts to select
an account.
2. Tap New.
3. Enter the e-mail address or text message address of one
or more recipients, separating them with a semicolon. To
access addresses and phone numbers from Contacts,
tap To.
4. Enter your message. To quickly add common messages,
tap Menu > My Text, and then tap a desired message.
94
Section 7: Exchanging Messages
5. To check the spelling, tap Menu > Spell Check.
6. Tap Send.
To enter symbols, tap Shift using the on-screen keyboard.
To set the priority, tap Menu > Message Options.
If you are working offline, e-mail messages are moved to the
Outbox folder and will be sent the next timeyou connect.
Tips:
If you are sending a text message and want to know if it was
received, before sending the message, tap Menu > Tools >
Options. Tap Text and select the Request delivery notification
check box.
To reply to or forward a message:
1. Open the message and tap Reply, or Menu > Reply All, or
Menu > Forward.
2. Enter your response. To quickly add common messages,
tap Menu > My Text, and then tap a desired message.
3. To check the spelling, tap Menu > Spell Check.
4. Tap Send.
To see more header information, scroll up.
To always include the original message, from the list view, tap
Menu > Tools > Options > Message tab, and select the When
Tips: replying to e-mail, include body check box.
In the Outlook E-mail account, you will send less data if you do
not edit the original message. This may reduce data transfer
costs based on your rate plan.
Section 7: Exchanging Messages
95
To add an attachment to a message:
1. In an open message, tap Menu > Insert, and then tap the
item you want to attach: Picture, Voice Note, or File.
2. Select the file you want to attach, or record a voice note.
To receive attachments:
An attachment sent with an e-mail message or downloaded
from the server appears below the subject of the message.
Tapping the attachment opens the attachment if it has been
fully downloaded, or marks it for download the next time you
send and receive e-mail. You can also download attachments
automatically with your messages if you have an Outlook
E-mail or IMAP4 E-mail account.
If you have an Outlook E-mail account, do the following on
your PC:
1. Tap Start > Programs > Microsoft ActiveSync.
2. Tap Tools > Options.
3. Tap E-mail > Settings, and then select Include
File Attachments.
If you have an IMAP4 E-mail account with an Internet service
provider (ISP) or an account that you access using a VPN server
connection (typically a work account), do the following:
1. Tap Start > Messaging.
2. Tap Menu > Tools > Options.
3. Tap the name of the IMAP4 account.
4. Tap Next until you reach Server information, and then
tap Options.
5. Tap Next twice, and select Get full copy of messages and
When getting full copy, get attachments.
96
Section 7: Exchanging Messages
Download Messages
The manner in which you download messages depends the type
of account you have:
To send and receive e-mail for an Outlook E-mail account,
begin synchronization through ActiveSync. For more
information, see “Synchronizing Outlook information” in
Section 4.
To send and receive e-mail messages for an e-mail account
that you have with an Internet Service Provider (ISP) or that
you access using a VPN server connection (typically a work
account), download messages through a remote e-mail
server. For more information, see “To download messages
from the server” later in this section.
Text messages are automatically received when your phone
is turned on. When your phone is turned off (in flight mode),
messages are delivered the next time your phone is
turned on.
To download messages from the server:
To send and receive e-mail messages for an e-mail account
that you have with an Internet Service Provider (ISP) or that
you access using a VPN server connection (typically a work
account), you first need to connect to the Internet or your
corporate network, depending on the account.
1. Tap Menu > Switch Accounts to select the account you
want to use.
2. Tap Menu > Send/Receive. The messages on your PPC-6700
and e-mail server are synchronized: new messages are
downloaded to the device Inbox folder, messages in the
device Outbox folder are sent, and messages that have
been deleted from the server are removed from the device
Inbox folder.
Section 7: Exchanging Messages
97
If you want to read the entire message, tap Menu > Download
Message while in the message window. If you are in the
message list, tap and hold the message, and tap Menu >
Download Message. The message will download the next time
you send and receive e-mail. This will also download message
attachments if you selected those options when you set up
the e-mail account.
Tip:
Manage Folders
Each Messaging account has its own folder hierarchy with five
default Messaging folders: Inbox, Outbox, Deleted Items, Drafts,
and Sent Items. The messages you receive and send through the
account are stored in these folders. You can also create additional
folders within each hierarchy. The Deleted Items folder contains
messages that have been deleted on the device. The behavior
of the Deleted Items and Sent Items folders depends on the
Messaging options you have chosen.
If you use an Outlook E-mail account, e-mail messages in the
Inbox folder in Outlook will be synchronized automatically with
your PPC-6700. You can elect to synchronize additional folders
by designating them for synchronization. The folders you create
and the messages you move will then be mirrored on the e-mail
server. For example, if you move two messages from the Inbox
folder to a folder named Family, and you have designated Family
for synchronization, the server creates a copy of the Family folder
and copies the messages to that folder. You can then read the
messages while you are away from your PC.
If you use a text message account, messages are stored in the
Inbox folder. If you use a POP3 account and you move e-mail
messages to a folder you created, the link is broken between the
messages on the device and their copies on the e-mail server.
The next time you connect, the e-mail server will detect that the
messages are missing from the Inbox folder on the device and
will delete them from the e-mail server. This prevents having
duplicate copies of a message, but it also means that you will no
longer have access to messages that you move to folders created
from anywhere except the device.
98
Section 7: Exchanging Messages
If you use an IMAP4 account, the folders you create and the
e-mail messages you move are mirrored on the e-mail server.
Therefore, messages are available to you anytime you connect to
your e-mail server, whether it is from your PPC-6700 or PC. This
synchronization of folders occurs whenever you connect to your
e-mail server, create new folders, or rename/delete folders when
connected. You can also set different download options for
each folder.
7.2 Pocket MSN Messenger
Pocket MSN Messenger delivers the features of MSN Messenger to
your Sprint PCS Vision Smart Device. With Pocket MSN Messenger
you can do the following:
Send and receive instant messages.
See which contacts are online or offline.
Subscribe to status updates for selected contacts so you know
when they come online.
Block contacts from seeing your status or sending
you messages.
Before you can use MSN Messenger, your device must be connected
to the Internet. For information about setting up an Internet
connection, see “Connecting to the Internet” in Section 6.
You must have either a Microsoft .NET Passport or Hotmail
account to use MSN Messenger. If you have a Hotmail.com or
Note: MSN.com e-mail address, you already have a Passport. To get
a Passport account, go to http://www.passport.com. To get a
Section 7: Exchanging Messages
99
To start MSN Messenger:
1. Tap Start > Programs > Pocket MSN.
2. Tap MSN Messenger.
To sign in or out:
To sign in, tap anywhere on the MSN Messenger screen.
Enter the e-mail address and password for your Passport
or Hotmail account, and then tap Sign In. Signing in may
take several minutes, depending on your
connection speed.
To sign out, tap Menu > Sign Out. Your status changes
to Offline.
To add or delete contacts:
To add a contact, tap Menu > Add a Contact, and then
follow the instructions on the screen.
To delete a contact, tap and hold the contact’s name, and
then tap Delete Contact from the shortcut menu.
To send an instant message:
1. Tap the contact to whom you want to send a message.
2. Enter your message in the text entry area at the bottom
of the screen, and then tap Send.
To quickly add common phrases, tap Menu > My Text and
select a phrase in the list.
Tip:
To block or unblock contacts:
To block a contact from seeing your status and sending
you messages, tap and hold the contact, and then tap
Block from the shortcut menu.
To unblock a contact, tap and hold the name of the
blocked contact, and then tap Unblock from the
shortcut menu.
100 Section 7: Exchanging Messages
To check your own Messenger status:
Tap and hold your own name at the top of the page. Your
current status is indicated in the displayed list by a
bullet point.
To change your display name:
1. Tap Menu > Options > Messenger tab.
2. Enter the name you want to display to others in
MSN Messenger.
To get more help about MSN Messenger:
When in MSN Messenger, tap Start > Help.
Section 7: Exchanging Messages
101
7.3 Calendar
Use Calendar to schedule appointments, including meetings and
other events. Your appointments for the day can be displayed on the
Today screen. If you use Outlook on your PC, you can synchronize
appointments between your PPC-6700 and PC. You can also set
Calendar to remind you of appointments with a sound or flashing
light, for example.
You can look at your appointments in several different views (Day,
Week, Month, Year, and Agenda). To see detailed appointment
information in any view, tap the appointment.
To schedule an appointment:
1. Tap Start > Calendar.
2. Tap Menu > New Appointment.
3. Enter a name for the appointment, and enter information
such as start and end times.
4. In the All Day box, tap Yes to schedule an all-day event.
5. When finished, tap OK to return to the calendar.
All-day events do not occupy blocks of time in Calendar;
instead, they appear in banners at the top of the calendar. To
cancel an appointment, tap the appointment, and then tap
Note:
Menu > Delete Appointment.
To have the time entered automatically in Day view, tap the
Tip:
time slot for the new appointment, and then tap Menu >
New Appointment.
102 Section 7: Exchanging Messages
To send a meeting request:
Use Calendar to schedule meetings via e-mail with contacts
who use Outlook or Outlook Mobile.
1. Tap Start > Calendar.
2. Schedule a new appointment, or open an existing one and
tap Edit.
3. Tap Attendees.
4. Tap the name of the contact you want to invite.
5. To invite each additional attendee, tap Add, and then tap
the name.
6. Tap OK.
7. The meeting request will be sent to the attendees the
next time you synchronize your PPC-6700 with your PC.
When attendees accept your meeting request, the meeting is
Note: automatically added to their schedules. When their response
is sent back to you, your calendar is updated as well.
To set a default reminder for all new appointments:
You can have a reminder automatically turned on for all new
appointments you schedule.
1. Tap Start > Calendar.
2. Tap Menu > Options > Appointments tab.
3. Select the Set reminders for new items check box.
4. Set the time when you want the reminder to alert you.
5. Tap OK to return to the calendar.
Section 7: Exchanging Messages
103
7.4 Contacts
Contacts is your address book and information storage for the
people and businesses you communicate with. Store phone
numbers, e-mail addresses, home addresses, and any other
information that relates to a contact, such as a birthday or an
anniversary date. You can also add a picture or assign a ring tone to
a contact.
From the contact list, you can quickly communicate with people.
Tap a contact in the list for a summary of contact information. From
there, you can call or send a message.
If you use Outlook on your PC, you can synchronize contacts
between your Sprint PCS Vision Smart Device and PC.
To create a contact:
1. Tap Start > Contacts.
2. Tap New, and then enter the contact information.
3. When finished, tap OK.
If someone who is not in your list of contacts calls you or sends
you a message, you can create a contact from Call History, or
from the message by tapping Menu > Save to Contacts.
Tips:
In the list of contact information, you’ll see where you can add
a picture or assign a ring tone to a contact.
To change contact information:
1. Tap Start > Contacts.
2. Tap the contact.
3. Tap Menu > Edit and enter the changes.
4. When finished, tap OK.
104 Section 7: Exchanging Messages
To work with the contact list:
There are several ways to use and customize the contact list.
Here are a few tips:
1. Tap Start > Contacts.
2. In the contact list, do any of the following:
In Name view, you can search for a contact by entering
a name or number, or by using the alphabetical index.
To switch to Name view, tap Menu > View By > Name.
To see a summary of information about a contact, tap
the contact. From there you can also make a call or
send a message.
To see a list of available actions for a contact, tap and
hold the contact.
To see a list of contacts employed by a specific
company, tap Menu > View By > Company. Then, tap
the company name.
To find a contact:
There are several ways to find a contact when your contact list
is long.
1. Tap Start > Contacts.
2. If you are not in Name view, tap Menu > View By > Name.
3. Do one of the following:
Begin entering a name or phone number in the
provided text box until the contact you want is
displayed. To show all contacts again, tap the text box
and clear the text, or tap the arrow to the right of the
text box.
Use the alphabetical index displayed at the top of the
contact list.
Filter the list by categories. In the contact list, tap
Menu > Filter. Then tap a category you’ve assigned to a
contact. To show all contacts again, select All Contacts.
Section 7: Exchanging Messages
105
7.5 Tasks
Use Tasks to keep track of things you need to do. A task can occur
once or repeatedly (recurring). You can set reminders for your tasks
and you can organize them using categories.
Your tasks are displayed in a task list. Overdue tasks are displayed
in red.
To create a task:
1. Tap Start > Programs > Tasks.
2. Tap New, enter a subject for the task, and fill in
information such as start and due dates, priority, and
so on.
3. When finished, tap OK.
You can easily create a short, to-do-type task. Simply tap the
Tap here to add a new task box, enter a subject, and press
Tip:
ENTER. If the task entry box is not available, tap Menu >
Options and select the Show Tasks entry bar check box.
To change the priority of a task:
Before you can sort tasks by priority, you need to specify a
priority level for each task.
1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and select a priority level in the Priority box.
4. Tap OK to return to the task list.
Note: All new tasks are assigned a Normal priority by default.
106 Section 7: Exchanging Messages
To set a default reminder for all new tasks:
You can have a reminder automatically turned on for all new
tasks you create.
1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Set reminders for new items check box.
4. Tap OK to return to the task list.
The new tasks must have due dates set in order for the
reminder to take effect.
Note:
To show start and due dates in the task list:
You can have a reminder automatically turned on for all new
tasks you create.
1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Show start and due dates check box.
4. Tap OK.
To locate a task:
When your list of tasks is long, you can display a subset of the
tasks or sort the list to quickly find a specific task.
1. Tap Start > Programs > Tasks.
2. In the task list, do one of the following:
Sort the list. Tap Menu > Sort by, and tap a sort option.
Filter the list by category. Tap Menu > Filter, and tap
the category you want displayed.
To filter your tasks further, tap Menu > Filter > Active Tasks or
Completed Tasks.
Note:
Section 7: Exchanging Messages
107
7.6 Notes
Notes helps you to quickly capture thoughts, questions, reminders,
to-do lists, and meeting notes. You can create handwritten and
typed notes, record voice notes, convert handwritten notes to text
for easy readability, and send notes to others.
With Notes, you can also record a voice note. For more instructions
about recording a voice note, see “Recording a Note” in Section 2.
Enter Information in Notes
There are several ways to enter information in a note. You can
enter typed text by using the on-screen keyboard or handwriting
recognition software. You can also use the stylus to write or draw
directly on the screen. You can also use the voice recorder to
create a standalone recording or embed a recording in a note.
To set the default input mode for Notes:
If you frequently add drawings to your notes, you may find it
helpful to set Writing as the default input mode. If you prefer
typed text, select Typing.
1. On your PPC-6700, tap Start > Programs > Notes.
2. In the note list, tap Menu > Options.
3. In the Default mode box, tap one of the following:
Writing if you want to draw or enter handwritten text
in a note.
Typing if you want to create a typed note.
4. Tap OK.
108 Section 7: Exchanging Messages
To create a note:
1. Tap Start > Programs > Notes.
2. In the note list, tap New.
3. Tap the Input Selector arrow to select the input method
you want, and enter your text.
4. If the Input Selector arrow is not displayed, tap the Input
Panel icon.
5. When finished, tap OK to return to the note list.
Section 7: Exchanging Messages
109
Section 8
Experiencing Multimedia
In This Section
8.1 Using Camera and Camcorder
8.2 Using Pictures & Videos
8.3 Using Windows Media Player
8.1 Using Camera and Camcorder
Taking photos and recording video clips along with audio is easy
with the device’s built-in camera.
To switch to any of the Camera modes:
Tap Start > Programs > Camera.
Tap Start > Programs > Pictures & Videos > Camera icon.
Press and hold the CAMERA
button for two seconds.
To exit the Camera:
Tap the exit icon (
).
Press the OK button.
Use the Camera
The camera on your Sprint PCS Vision Smart Device allows you to
capture pictures and video clips by using various built-in modes
with flexibility. The Camera mode is set to the Photo capture
mode by default. The lower right corner of the screen displays the
active capture mode. To switch to other capture modes, do any of
the following:
Tap or on the screen.
Press NAVIGATION left or right.
The available capture modes of the camera are as follows:
Photo: Captures standard still images.
Video: Captures video clips, with or without
accompanying audio.
Contacts Picture: Captures a still image and gives you the
option to immediately assign it to a Photo ID for a contact.
Picture Theme: Captures still images and places them
within frames.
112
Section 8: Experiencing Multimedia
Panorama: Captures a sequence of still images continuously
in one direction, and allows stitching of all images to create
a collage.
Sport: Captures a sequence of still images (5 ~ 30)
automatically for a short duration at a defined frequency.
Burst: Captures a sequence of still images (maximum 30) as
long as the CAMERA or ENTER button is kept pressed.
File formats supported:
Using the above capture modes, the camera in your PPC-6700
captures files in the following formats:
Capture type
Format
Still image
Video
BMP, JPEG
Motion-JPEG AVI (.avi), MPEG-4 (.mp4), 3GPP2
JPEG
Burst / Sport
Use Shortcuts in Camera Mode
While in Camera mode, you can use the following buttons and
icons on the device as a shortcut when performing operations.
The ENTER button
Press ENTER on the NAVIGATION control to take a picture
when you are capturing a still image. Press this button to start
recording an incoming video stream; press it again to stop
recording.
The NAVIGATION control
Press NAVIGATION up or down to increase or decrease the
zoom level.
Press NAVIGATION left or right to go to the previous next
or sequential capture mode.
Section 8: Experiencing Multimedia
113
The CAMERA button
Press and hold CAMERA on the device for two seconds to
switch to Camera mode. If already in Camera mode, press
once to take a still image or to start recording a video clip. In
Photo capture mode, point your device and press this button to
capture more still images.
Camera mode icons
Current time indicator. The time indicator tells you the
current time (for example, the time shown in the previous
screenshot is
).
Remaining information indicator. The film icon (
)
displays number of available pictures remaining, based on
current settings.
Resolution indicator. The resolution icon (
/
/
/
/
/
) indicates the current resolution.
Ambience indicator. The ambience icon (
/
/
/
/
) indicates the current ambience.
Zoom-Ratio indicator. Tapping the up/down arrow (
on the screen allows you to zoom in and zoom out.
/
)
Mode Switching button. Tapping the left/right arrow
on the screen allows you to switch the capture mode.
(
/
)
Self-Time indicator. The timer icon ( ) indicates the current
setting of Self-Timer while capturing images or videos.
Previous/Next Template button. In Picture Theme mode, tap
the template selector icon (
next sequential template.
/
) to display the previous/
Reset Status button. In Panorama mode, tap the reset
icon ( ) to stop the current Panorama capture progress
and revert to normal preview. The icon appears if the
Auto-stitch the snapped images while in Panorama mode
check box on the Camera Settings screen is not selected.
114
Section 8: Experiencing Multimedia
Camera Settings. Tap the tool icon (
Settings screen. Tap OK to return to Camera mode.
) to open the Camera
Flash. Tap the flash icon to turn on/off the flash. The
icon
indicates the flash is turned on; the
flash is turned off.
icon indicates the
Picture Viewer. Tap the viewer icon (
or video in Pictures & Videos.
) to view the picture
Exit. Tap the exit icon (
) to exit the Camera program.
Use Still Image Capture Modes
While using Still Image capture modes, such as Photo, Contacts
Picture, Picture Theme, Panorama, Sport, and Burst, you can
capture a single still image by pressing CAMERA or ENTER. The
Still Image capture modes support either BMP or JPEG format, as
specified by you on the Camera Settings screen.
While capturing an image in the Picture Theme capture mode,
you can select a built-in template from the default template
folder. To browse and select different templates, tap the template
selector icon or tool icon to select a template.
Use Video Capture Modes
While using the Video capture mode, you can press CAMERA or
ENTER to start recording a video clip (with audio if desired). To
stop recording, press the button again. Your PPC-6700 displays
the first frame of the captured video clip by default on the
Review screen.
Before you capture a video clip, you can specify the recording
limit in terms of time and file size on the Camera Settings screen
so that the recording stops automatically when the clip size
reaches that limit.
You can set the capture format to either Motion-JPEG AVI or
MPEG-4 on the Camera Settings screen.
Section 8: Experiencing Multimedia
115
Use the Review Screen
Review mode icons
Back to Camera. Tap
to go back to Camera mode to
capture an image.
Send. Tap
to send the captured image to someone via
e-mail.
Delete. Tap
to remove the captured image.
View in Pictures. Tap
to switch to Pictures & Videos
program. The captured image will be displayed in the
Detailed View.
View in Windows Media. In Video capture mode, tap
to switch to Windows Media Player to play back the new
video you just recorded.
Assign to Contacts. Tap
to send the new file
immediately to a contact in the contact list.
To access the icons on the Review mode screen:
1. In Camera mode, tap Tools > Options > General tab.
2. Select the Review after capture check box.
The Review after capture check box is selected by default to allow
Note:
you to review the image or video clip after it has been captured.
Use Zooming
While capturing a still image or a video clip by using the main
camera, you can zoom in to make the object in focus move
closer, and you can zoom out to make the object move farther
away. In all capture modes, use the NAVIGATION on the device or
tap to zoom in on a still image or an incoming video stream. To
zoom out, press NAVIGATION down or tap . The camera's zoom
range depends on the capture mode and capture size. Following
is a summary.
116
Section 8: Experiencing Multimedia
Capture
mode
Capture size
setting
Zoom range
Scaled (1600 x 1280)
1.3M (1280 x 1024)
Large (640 x 480)
Medium (320 x 240)
Small (160 x 120)
Large (320 x 240)
Medium (176 x 144)
Small (128 x 96)
No zooming available.
1.0x to 2.0x
Photo
1.0x to 2.0x
1.0x to 4.0x
1.0x to 8.0x
1.0x to 2.0x
Video
1.0x to 2.0x
1.0x to 2.0x
Determined by the
current template.
Depends on the size of the
template currently loaded.
Picture Theme
Panorama
Large (640 x 480)
Medium (320 x 240)
Small (160 x 120)
Large (640 x 480)
Medium (320 x 240)
Small (160 x 120)
1.3M (1280 x 1024)
Large (640 x 480)
Medium (320 x 240)
Small (160 x 120)
1.0x to 2.0x
1.0x to 4.0x
1.0x to 8.0x
1.0x to 2.0x
1.0x to 4.0x
1.0x to 8.0x
1.0x to 2.0x
1.0x to 2.0x
1.0x to 4.0x
1.0x to 8.0x
Sport
Burst
The capture sizes available for certain capture formats also vary
from one capture mode to another. The zoom range has been
calculated based on the following ratio:
1.0x = normal size (no zooming)
2.0x = double enlargement
4.0x = quadruple enlargement
8.0x = octuple enlargement
Section 8: Experiencing Multimedia
117
Set Up the Camera
While capturing a still image or video
clip using any capture modes, tap the
tool icon (
) to access the Camera
Settings screen. The Camera Settings
screen allows you to configure the
capture settings.
Camera settings, Tools
You can configure the following settings on the Camera
Settings screen:
Setting
Allows you to
Select a capture mode.
Select a capture format.
Select a capture size.
Capture mode
Capture format
Capture size
Capture
frequency
Select a capture frequency.
Record
limitation
Specify the maximum time or file size for recording.
Template
Browse
Select a template.
Navigate to a folder containing templates.
Select a capture direction.
Direction
Stitch count
Burst count
Ambience
Select a count of snapped images.
Select a count of automatic capturing.
Select an ambience type.
After you configure your camera settings, tap OK or Start Camera
on the Camera Settings screen to go back to the Camera screen.
118
Section 8: Experiencing Multimedia
To use the Tools menu:
The Tools menu on the Camera Settings screen provides the
following advanced options for configuring and customizing
the Camera mode functions.
Camera settings, Tools
The Adjust item.
Tap Tools > Adjust to adjust the camera display properties,
such as Contrast, Brightness, Saturation, Hue, and Sharpness.
Select one of these properties from the list and move the
slider (or tap the slider) to change the value. The preview
window on the Adjust screen displays the effect of changes
you make on the Adjust screen. Tap OK to save the settings.
The Options item.
Tap Tools > Options to display the Options screen with the
following three tabs:
General tab. This field includes the following options:
Disable shutter sound: Select this check box to disable
all default sounds played while capturing a still image
or recording a video clip.
Keep backlight on while in viewfinder: Select this check
box to ensure that the backlight remains turned on
while you view the incoming video stream, overriding
your device backlight settings.
Section 8: Experiencing Multimedia
119
Review after capture: Select this check box to display
the captured image immediately after you take
a picture. The Review screen provides options for
performing various operations on the new file. Clearing
this check box saves any newly captured file using the
default file name, and returns to the Camera screen.
Apply “Date and time stamp” while capturing images:
Select this check box to automatically compose the
current date and time in the captured images.
Flicker adjustment: To eliminate flicker image, select
the proper frequency (50Hz or 60Hz) of the country
where the device is being used.
Save to: Select where you want to save your captured
files. You can either save the files to main memory or to
a storage card.
Image tab. This field provides image-related settings for
captured files.
Prefix type and Prefix string: By default, the file name
of each new captured image file is set to “IMAGE”
followed by a sequential number, for example:
IMAGE_00001.jpg. To change this prefix, select String
in the Prefix type list, and then enter the desired
characters in the Prefix string box.
Counter Index: By default, the newly captured image
files are named with a prefix and some sequential
numbers, such as 00000, 00001, 00002, and so on.
To reset the numbering to “00001” for your captured
image files, tap Reset counter.
JPEG Quality: Select the JPEG image quality level for all
captured still images. You can choose from SuperFine,
Fine, Normal, and Basic.
Self-Timer: Select the Self-Timer option for capturing
images: Off, 5 seconds, or 10 seconds. Selecting 5
seconds or 10 seconds delays the capturing by the
specified time after you press CAMERA or ENTER.
120
Section 8: Experiencing Multimedia
Auto-stitch the snapped images while in Panorama
mode: When this check box is selected, the camera
automatically stitches all snapped images into one
single file. If you do not select this check box while
capturing images in Panorama mode, the snapped
images are saved as separate files.
Video tab. The options in this field are for configuring
the advanced settings of the captured video files.
Prefix type and Prefix string: By default, the file name
of each new, captured video file is set to “VIDEO”
followed by a sequential number, for example:
VIDEO_00001.avi. To change this prefix, select String in
the Prefix type list and enter the desired characters in
the Prefix string box.
Counter Index: By default, the newly captured video
files are named with a prefix and some sequential
numbers, such as 00000, 00001, 00002, and so on. To
reset the numbering to “00001” for your captured video
files, tap Reset counter.
Recording with Audio: Select this check box to record
audio with the captured video clips. This check box is
selected by default. If you clear this check box and then
capture a video clip, it will not include audio.
Section 8: Experiencing Multimedia
121
8.2 Using Pictures & Videos
The Pictures & Videos program collects, organizes, and sorts images
and video clips in the following formats on your PPC-6700.
File type
Image
File extensions
*.bmp, *.jpg
Video
*.avi, *.wma, *.mp4, *.3gp
You can view the pictures as a slide show, beam them, send
them via e-mail, edit them, or set them as the background on
the Today screen.
To copy a picture or video clip to your PPC-6700:
Copy the pictures from your PC or a storage card to the
My Pictures folder on the device.
You can copy pictures from your PC and view them on your
PPC-6700. For more information about copying files from your
PC to your PPC-6700, see ActiveSync Help on your PC.
You can also copy pictures from your PC to your PPC-6700 using
a memory card. Insert the memory card into the memory card
slot on the device, and then copy the pictures from your PC to the
Note:
folder you created on the memory card.
To view pictures:
1. Tap Start > Programs > Pictures & Videos. The images in
the My Pictures folder appear as thumbnails by default.
2. Select a picture and tap View. If you cannot find a picture
in the default My Pictures folder, go to another folder by
tapping the Down arrow.
122
Section 8: Experiencing Multimedia
Tap to change folder
Tap to view pictures
To play videos with audio:
1. Tap Start > Programs > Pictures & Videos.The videos in the
My Videos folder appear as thumbnails by default, which
appear with a media icon (
).
2. Select a video and tap the thumbnail to play it with the
built-in Windows Media Player.
To view slide shows:
You can view your pictures as a slide show on your Sprint PCS
Vision Smart Device. Pictures are shown in fullscreen view with
5-second intervals between slides. During the slide shows,
you can tap anywhere on the screen to display the Slide Show
toolbar, which you can use to stop or pause the slide show,
rotate the view, and more. Press NAVIGATION right or left to
move forward or backward through the slides.
1. Tap Start > Programs > Pictures & Videos.
2. Tap Menu > Play Slide Show.
You can specify how pictures are scaled to optimize their dis-
Note: play in a slide show. Tap Menu > Options, and then tap Portrait
Pictures or Landscape Pictures on the Slide Show tab.
Section 8: Experiencing Multimedia
123
To sort pictures and video clips:
If you store a large number of pictures or video clips on the
device, you may find it helpful to sort them to quickly find a
specific picture or clip. You can sort by name, date, and size.
1. Tap Start > Programs > Pictures & Videos.
2. Tap the sort list (labeled Date by default), and select the
category you want to sort by.
To delete a picture or video clip:
Do any of the following to remove a picture or a video clip:
Select a picture or video clip on the Pictures & Videos
screen, and then tap Menu > Delete. Tap OK to confirm
the deletion.
Tap and hold the thumbnail of the picture you want to
delete, and then tap Delete.
To edit a picture:
You can rotate, crop, and adjust the brightness and color
contrast of your pictures.
1. Tap Start > Programs > Pictures & Videos.
2. Tap the picture you want to edit.
3. Tap Menu > Edit, and do any of the following:
To rotate a picture 90 degrees counterclockwise,
tap Rotate.
To crop a picture, tap Menu > Crop. Then, tap and
drag to select the area to crop. Tap outside the box
to stop cropping.
To adjust the brightness and contrast levels of a
picture, tap Menu > AutoCorrect.
To undo an edit, tap Menu > Undo. To cancel all unsaved edits
Note:
you made to the picture, tap Revert to Saved.
124
Section 8: Experiencing Multimedia
To set a picture as the Today screen background:
1. Tap Start > Programs > Pictures & Videos.
2. Select the picture you want to set as the background.
3. Tap Menu > Set as Today Background.
4. In Transparency level, select a lower percentage for a
more transparent picture, or a higher percentage for a
more opaque picture. Then tap OK.
To beam a picture:
You can beam a picture to your friends or a family member
using Infrared.
1. Tap Start > Programs > Pictures & Videos.
2. Select the picture you want to beam.
3. Tap Menu > Beam.
4. Select a destination for the picture.
5. Tap OK.
To assign pictures to contacts:
You can assign a picture to a contact so that you can easily
identify the contact at any point of time.
1. Tap Start > Programs > Pictures & Videos.
2. Select the picture you want to assign to a contact.
3. Tap Menu > Save to Contact.
4. Tap the contact, or navigate and tap Select to choose the
contact from your Contacts list.
Section 8: Experiencing Multimedia
125
To use advanced options:
1. Tap Start > Programs > Pictures & Videos.
2. Select the picture for which you want to configure further
settings.
3. Tap Menu > Options. The Options screen appears,
allowing you to:
Resize a picture so that you can send it faster to
someone using your e-mail.
Configure the view settings during slide shows and
activate screensaver options.
8.3 Using Windows Media Player
You can use Microsoft Windows Media Player 10 Mobile for Pocket
PC to play digital and video files that are stored on your device or on
a network, such as on a website.
Using Windows Media Player, you can play both audio and video
files. The following file formats are supported by this version of
Windows Media Player.
Supported video file:
File formats
File extensions
Windows Media Video
MPEG4 Simple Profile
H.263
*.wmv, *.asf
*.mp4
*.3gp
Motion JPEG
3GPP2
*.avi
*.3g2
126
Section 8: Experiencing Multimedia
Supported audio file:
File formats
File extensions
Windows Media Audio
*.wma
MP3
*.mp3
MIDI
*.mid, *.midi, *.rmi
*.amr
*.awb
AMR Narrow Band
AMR Wide Band
AAC
*.m4a
3GPP2
*.gcp
About the Controls
The following are available controls on the Windows Media Player.
This control
Does this
Plays/pauses a file.
/
Skips to the beginning of the current file or to the
previous file.
Skips to the next file.
Adjusts the playback progress of a selected file.
Increases/decreases the volume level.
Turns the sound on or off.
/
Displays a video by using the entire screen (full
screen).
Displays a website where you can find music and
videos to play.
Section 8: Experiencing Multimedia
127
About the Screens and Menus
Windows Media Player has three primary screens:
Playback screen. The default screen that displays the
playback controls (such as Play, Pause, Next, Previous, and
Volume), the album art window, and the video window.
You can change the appearance of this screen by choosing a
different skin.
Now Playing screen. The screen that displays the Now Playing
playlist. This special playlist indicates the currently playing
file and any files that are “queued up” to play next.
Library screen. The screen that lets you quickly find your
audio files, video files, and playlists. It contains categories
such as My Music, My Video, My TV, and My Playlists.
At the bottom of each screen is a menu called Menu. The
commands on this menu change depending upon which screen
you are viewing.
Playback Screen Menu
When you are viewing the Playback screen, the following
commands appear on Menu.
This control
Play/Pause
Does this
Starts or pauses playback.
Plays the items in the Now Playing playlist
repeatedly.
Repeat
Stop
Stops playback.
When a video is playing, displays it by using the
entire screen.
Full Screen
Displays the Library screen so you can choose a file
to play.
Library
Lets you play a file on a network, such as the
Internet.
Open URL
Lets you adjust various Windows Media Player
options, including network, skin, and hardware
button options.
Options
128
Section 8: Experiencing Multimedia
Displays information about the currently playing
file.
Properties
About
Displays information about Windows Media Player,
such as the version number.
Now Playing Screen Menu
When you are viewing the Now Playing screen, the following
commands appear on Menu.
This control
Library
Does this
Displays the Library screen so you can choose a file
to play.
Move Up
Moves the selected item up in the playlist order.
Moves the selected item down in the playlist order.
Move Down
Remove from
Playlist
Deletes the selected item from the playlist.
Deletes all items from the Now Playing playlist.
Clear Now
Playing
Displays error information about the selected item
(an exclamation mark appears before the item
name if error details are available).
Error Details
Properties
Displays information about the selected file.
Library Screen Menu
When you are viewing the Library screen, the following
commands appear on Menu.
This control
Queue Up
Does this
Adds the selected item to the end of the current
(Now Playing) playlist.
Delete from
Library
Deletes the selected item from the library.
Section 8: Experiencing Multimedia
129
Update
Library
Adds new items to the library by searching the
device or storage card.
Lets you find and play files that are stored on the
device or storage card but that are not in the library.
Open File
Lets you play a file on a network, such as the
Internet.
Open URL
Properties
Displays information about the selected file.
About Licenses and Protected Files
Some content (such as digital media files downloaded from
the Internet, CD tracks, and videos) have associated licenses
that protect them from being unlawfully distributed or shared.
Licenses are created and managed by using digital rights
management (DRM), which is the technology for securing
content and managing its access rights. Some licenses may
prevent you from playing files that have been copied to your
Sprint PCS Vision Smart Device. Files that have licenses associated
with them are called “protected files.”
If you want to copy a protected file from your PC to your device
use the desktop Player to synchronize the file to the device
(instead of dragging the file from a folder on your PC to a folder
on the device, for example). This will ensure that the license is
copied along with the protected file. For more information about
synchronizing files to your PPC-6700 and other mobile devices,
see desktop Player Help.
You can view the protection status for a file by checking its file
properties (tapping Menu > Properties).
Note:
130
Section 8: Experiencing Multimedia
To play items on your PPC-6700:
Use the library to find and play songs, videos, and playlists that
are stored on the device or removable storage card.
1. If you are not on the Library screen, tap Menu > Library.
2. On the Library screen, tap the Library arrow (near the top
of the screen), and then tap the library that you want use
(for example, My Device or Storage Card).
3. Tap a category (for example, My Music or My Playlists), tap
and hold the item that you want to play (such as a song,
album, or artist name), and then tap Play.
To play a file that is stored on the device but is not in a library, on
the Library screen, tap Menu > Open File. Tap and hold the item
that you want to play (such as a file or a folder), and then tap
Note:
Play.
To play an item on a network:
Use the Open URL command to play a song or video that is
stored on the Internet or on a network server.
1. If you are not on the Playback screen, tap OK to close the
current screen and display the Playback screen.
2. Tap Menu > Open URL.
3. Do one of the following:
In the URL box, enter a network address.
In the History box, tap a URL that you have previously
used.
To play an item on a network, you must be connected
to a network. For more information about creating a
remote connection between the device and a network, see
Note:
Connections Help on the device.
Section 8: Experiencing Multimedia
131
Copy Files to Your Sprint PCS Vision Smart Device
Use the latest version of the desktop Player (Windows Media Player
10 or later) to synchronize digital media files to your PPC-6700
(instead of dragging a file from a folder on your PC to a folder on
the device, for example). Using the desktop Player ensures that
licenses are copied with protected files.
When synchronizing files, always synchronize the files to a storage
card that is installed in the device. Do not synchronize to a storage
card that is inserted into a storage card reader. In addition, do not
synchronize to the internal storage location (RAM) in the device.
For more information about synchronizing files to mobile devices,
see desktop Player Help on the PC.
Audio files copy faster if the desktop Player is configured to
Note: automatically set the quality level for audio files copied to the
device. For more information, see desktop Player Help on the PC.
132
Section 8: Experiencing Multimedia
Accessibility for People With Disabilities
Microsoft is committed to making its products and services easier
for everyone to use. Many accessibility features have been built into
Microsoft products, including features for individuals who have
difficulty typing or using a mouse, who are blind or have low vision,
or who are deaf or hard-of-hearing. For more information about
the following topics, see the Accessibility section of the Microsoft
website (http://www.microsoft.com/enable/default.aspx).
Accessibility in Microsoft Windows.
Adjusting Microsoft products for people with accessibility needs.
Free step-by-step tutorials.
Microsoft documentation in alternative formats.
Assistive technology for Windows.
Customer service for people who are deaf or hard-of-hearing.
The information in this section applies to users who license
Microsoft products in the United States. If you obtained this
product outside the United States, your package contains
a subsidiary information card that you can use to contact
your subsidiary about the products and services available
in your area.
Note:
Section 8: Experiencing Multimedia
133
Section 9
Using Other Applications
In This Section
9.1 Word Mobile
9.2 Excel Mobile
9.3 Viewing Slide Shows With
PowerPoint Mobile
9.1 Word Mobile
Word Mobile is a streamlined version of Microsoft Word. Word
documents created on your PC can be opened and edited on your
device. You can also create and edit documents and templates in
Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.
You can have only one document open at a time. When you open a
second document, the first one is saved and closed automatically.
When you close a newly created document, it is automatically
named after the first several words in the document and placed
in the Word Mobile document list. You can easily rename the
document with a more meaningful name and move it to another
folder or a storage card.
To create a file:
1. Tap Start > Programs > Word Mobile.
2. Tap New.
3. You’ll see either a blank document or template, depending
on what you’ve selected as the default template.
4. Enter text as desired.
5. When finished, tap OK to save the file.
Unsupported Features in Word Mobile
Word Mobile does not fully support some features of Microsoft
Word such as revision marks and password protection. Some data
and formatting may be lost when you save the document on
your device.
The following features are not supported in Word Mobile.
Backgrounds.
Shapes and text boxes.
Artistic page borders.
Smart tags.
Metafiles.
Section 9: Using Other Applications
136
Bi-directional text. While Word Mobile will open documents
containing bi-directional text, the indentations and
alignment may be displayed and saved incorrectly.
Password-protected files. Word Mobile does not support
opening password-protected documents. You must first
remove the password protection in Word on the PC.
Document protection. Word Mobile does not support
displaying files that have been protected in Word on the PC.
The following features are partially supported in Word Mobile.
Picture bullets
Revision marks.
Underline styles. Underline styles not supported by Word
Mobile are mapped to one of the four supported styles:
regular, dotted, wavy, or thick/bold/wide.
Legacy Pocket Word files. You can open *.psw files in Word
Mobile; however, if you edit a file, you will need to save it in
*.doc, *.rtf, *.txt, or *.dot format.
The following features are not supported on the device; however,
they are retained in the file so that when a file is opened on the
PC again, they appear as expected.
Footnotes, endnotes, headers, footers.
Page breaks.
Lists.
Fonts and font sizes. Fonts not supported by the device are
mapped to the closest font available, although the original
font will be listed on the device.
To get more help about Word Mobile:
When in Word Mobile, tap Start > Help.
Section 9: Using Other Applications
137
9.2 Excel Mobile
Excel Mobile makes it easy for you to open and edit Excel workbooks
and templates created on your PC. You can also can create new
workbooks and templates on your device. To launch Excel Mobile,
tap Start > Programs > Excel Mobile.
Work in full-screen mode to see as much of your workbook
as possible.
Tips:
Tap View > Zoom and select a percentage so that you can
easily read the worksheet.
Unsupported Features in Excel Mobile
Excel Mobile does not fully support some features such as formulas
and cell comments. Some data and formatting may be lost when
you save the workbook on your device. Note the following Excel
Mobile formatting considerations:
Alignment. Horizontal, vertical, and wrap-text attributes
remain the same, but vertical text appears horizontal.
Borders. Appear as a single line.
Cell patterns. Patterns applied to cells are removed.
Fonts and font sizes. Fonts not supported by your device are
mapped to the closest font available. The original font is listed
on your device. When the workbook is opened in Excel on your
PC again, the data is displayed in the original font.
Number formats. Numbers formatted using the Microsoft
Excel 97 conditional formatting feature are displayed in
Number format.
Formulas and functions. If an Excel file contains a function that
is not supported by Excel Mobile, the function is removed, and
only the returned value of the function appears. The following
formulas are also converted to values: formulas entered
as an array or containing an array argument, for example,
=SUM({1;2;3;4}); formulas containing external link references
or an intersection range reference; and formulas containing
references past row 16384 are replaced with #REF!
Section 9: Using Other Applications
138
Protection settings. Most worksheet and workbook protection
features are disabled but not removed. However, support
for password protection has been removed. Workbooks that
are password-protected or workbooks in which one or more
worksheets are password-protected cannot be opened. You
must remove the password protection in Excel on the PC and
then synchronize to open the file on the device.
Zoom settings. Are not retained. Excel supports a per
worksheet zoom setting, while the Excel Mobile zoom setting
is applied to the entire workbook.
Worksheet names. Names that reference worksheets within
the same workbook are displayed accurately, but names that
refer to other workbooks, arrays, for example, ={1;2;3;4}, array
formulas, or intersection ranges are removed from the name
list. If a name is removed from the list, it is left in formulas and
functions, causing those formulas to be resolved as “#NAME?”
All hidden names are not hidden.
AutoFilter settings. Are removed. However, you can use the
AutoFilter command in Excel Mobile to perform similar
functions. If you have an AutoFilter applied to a worksheet
that causes rows to be hidden, the rows remain hidden when
the file is opened in Excel Mobile. Use the Unhide command to
display the hidden rows
Chart formatting. All charts will be saved the way they are
shown in Excel Mobile. Unsupported chart types are changed
to one of these supported types: Column, Bar, Line, Pie, Scatter,
and Area. Background colors, gridlines, data labels, trend lines,
shadows, 3D effects, secondary axes, and logarithmic scales
are turned off.
Worksheet features. The following features are not supported
in Excel Mobile and are removed or modified when a workbook
is opened on the device: hidden sheets are not hidden; VBA
modules, macro sheets, and dialog sheets are removed and
replaced with a place holder sheet; text boxes, drawing
objects, pictures, lists, conditional formats, and controls are
removed; pivot table data is converted to values.
To get more help about Excel Mobile:
When in Excel Mobile, tap Start > Help.
Section 9: Using Other Applications
139
9.3 Viewing Slide Shows With
PowerPoint Mobile
With PowerPoint Mobile, you can open and view slide show
presentations created on your PC in *.ppt and *.pps format with
PowerPoint ‘97 and later. Please note this program only allows you
to view the files; you cannot edit or rearrange the presentations in
any way.
Many presentation elements built into the slide shows such as
slide transitions and animations will play back on the device. If the
presentation is set up as a timed slide show, one slide will advance
to the next automatically. Links to URLs are also supported.
PowerPoint features not supported on the device include:
Notes. Notes written for slides will not be visible.
Rearranging or editing slides. PowerPoint Mobile is a
viewer only.
File formats. Files created in *.ppt format earlier than
PowerPoint ‘97 and HTML files in *.htm and *.mht formats are
not supported.
To start a slide show presentation:
1. Tap Start > Programs > PowerPoint Mobile.
2. In the presentation list, tap the slide show you want
to view.
3. Tap the current slide to advance to the next slide.
If the presentation is set up as a timed slide show, slides will
advance automatically.
To stop a slide show:
In a PowerPoint Mobile presentation, tap
> End Show.
Section 9: Using Other Applications
140
To navigate between slides:
You can advance to the next slide if a presentation is not set up
as a timed slide show, return to the previous slide, or go to any
slide out of sequence.
1. Tap Start > Programs > PowerPoint Mobile.
2. Open the presentation you want to view.
3. Tap
> Next or Previous; or tap Go to Slide, and then
tap the the slide you want to view.
If you have zoomed in to see a slide in more detail, you cannot
navigate to another slide until you zoom out.
Notes:
Tapping Next or Previous may play an animation on a slide
rather than navigate to another slide.
Tip:
Simply tap the current slide to go to the next one.
Section 9: Using Other Applications
141
Appendix
In This Section
A.1 Regulatory Notices
A.2 System Requirement for ActiveSync 4.x
A.3 Specifications
A.4 Warranty
A.5 Index
A.1 Regulatory Notices
Regulatory Agency IDs
For regulatory identification purposes, your product is assigned a
model number of PA10A.
The following accessories have been approved for use with your
device. The assigned model number(s) listed below identify these
approved accessories. To ensure continued reliable and safe
operation of your device, use only the accessories listed below with
your PA10A.
This product is intended for use with a certified Class 2 Limited
Power Source, rated 5 Volts DC, maximum 1 Amp power
supply unit.
FCC Notice
FCC Part 15.21
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
FCC ID: NM8PA10A
FCC Part 15.19
“This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.”should be put in a conspicuous location on
the device. If the device is so small or for such use that it is not
practicable to place the statement on it, the above information
shall be placed in a prominent location in the instruction
manual or pamphlet supplied to the user or, alternatively, shall
be placed on the container in which the device is marketed.
FCC Part 15.105 (b)
For a Class B digital device or peripheral, the instructions
furnished the user shall include the following or similar
statement, placed in a prominent location in the text of
144
Appendix
the manual:This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Using Your Phone With a Hearing Aid Device
Your PPC-6700 has been tested for hearing aid device compatibility.
When some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also vary
in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated will have the rating on the
box. Your PPC-6700 has an M3 rating.
Phones rated M3 or M4 meet FCC requirements and
may generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of
Note:
the two ratings.
Appendix 145
The M3/M4 ratings do not guarantee successful interoperation
between your phone and hearing aid device. Results will vary
depending on the level of immunity of your hearing device and
degree of your hearing loss.
The more immune your hearing aid device is, the less likely you
are to experience interference noise from your wireless phone.
Hearing aid devices should have ratings similar to phones. Ask
your hearing healthcare professional for the rating of your aids.
Most new hearing aids have at least an M2 immunity level. Add
the “M”ratings of your hearing aid and your phone to determine
probable usability:
Any combined rating equal to or greater than six offers best use.
Any combined rating equal to five is considered normal use.
Any combined rating equal to four is considred usable.
Thus, if you pair an M3 hearing aid with an M3 phone, you will have
a combined rating of six for “best use.”
Sprint further suggests you experiment with multiple phones (even
those not labeled M3 or M4) while in the store to find the one that
works best with your hearing aid device. Should you experience
interference after purchasing your phone, promptly return it to the
store. With the Sprint 14-day Risk-Free Guarantee you may return
the phone within 14 days of purchase for a full refund.
Getting the Best Hearing Device Experience With
Your Sprint PCS Phone
To further minimize interference:
There is usually less interference on the microphone setting than
the telecoil setting.
Set the phone’s Display and Keypad backlight settings to
ensure the minimum time interval.
Use phones with a pull-out antenna. Phones with embedded
antennae may produce more interference.
Position the phone so the antenna is farthest from your hearing
aid.
Move the phone around to find the point with least interference.
146
Appendix
Important Health and Safety Information
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to
the equipment, observe the following precautions.
General Precautions
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside these compartments should be
done by an authorized service technician or provider.
Damage requiring service
Unplug the product from the electrical outlet and refer
servicing to an authorized service technician or provider under
the following conditions:
Liquid has been spilled or an object has fallen into
the product.
The product has been exposed to rain or water.
The product has been dropped or damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow
the operating instructions.
Environment restrictions
Do not use this product at gas or refueling stations. The use
of this product is also prohibited in fuel storehouses, chemical
plants, and locations containing explosives.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in a wet location.
Appendix 147
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked
or covered.
Mounting Accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
Adjust the volume
Turn down the volume before using headphones or other
audio devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning, but NEVER use water to clean the LCD screen.
Safety Precautions for Power Supply Unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with
the product.
Handle battery packs carefully
This product contains a Li-Ion Polymer battery. There is a risk
of fire and burns if the battery pack is handled improperly.
Do not attempt to open or service the battery pack. Do not
disassemble, crush, puncture, short external contacts or
circuits, dispose of in fire or water, or expose a battery pack to
temperatures higher than 60˚C (140˚F).
148
Appendix
Warning: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. TO REDUCE RISK OF FIRE OR BURNS, DO NOT
DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS,
HEAT ABOVE 60˚C (140˚F), OR DISPOSE OF IN FIRE OR WATER.
REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE
OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS
OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT.
SAR Information
SAR: 1.098 W/kg @1g (USA)
THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Your wireless mobile CDMA phone is a radio transmitter and
receiver. It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general
population. The guidelines are based on the safety standards
previously set by both U.S. and international standards bodies:
American National Standards Institute (ANSI) IEEE.
C95.1-1992.
National Council on Radiation Protection and Measurement
(NCRP). Report 86. 1986.
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1996.
Ministry of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile CDMA phone employs
a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg*.
Appendix 149
For body worn operation, this phone has been tested and meets
the FCC RF exposure guidelines when used with an accessory that
contains no metal and that position the antenna of the CDMA
phone a minimum of 1.5cm from the body. The SAR values of this
CDMA phone are 0.573 W/g (body) and 1.098 W/g (head). Use
of other accessories may not ensure compliance with the FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this model
device with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model device is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID: NM8PA10A. Additional information on
Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) website as
* In the U.S. and Canada, the SAR limit for mobile CDMA phone
used by the public is 1.6 Watts/kg (W/kg) averaged over one
gram of tissue. The standard incorporates a substantial margin of
safety to give additional protection for the public and to account
for any variations in usage.
Normal condition only to ensure the radiative performance
and safety of the interference. As with other mobile radio
transmitting equipment, users are advised that for satisfactory
operation of the equipment and for the safety of personnel, it
is recommended that no part of the human body be allowed
to come too close to the antenna during operation of the
equipment.
150
Appendix
A.2 System Requirements forActiveSync 4.x
A.2 System Requirements forActiveSync 4.x
To connect your device to the PC, you must have Microsoft®
To connect your device to the PC, you must have Microsoft®
ActiveSync® installed on your PC. ActiveSync 4.x is included in the
ActiveSync® installed on your PC. ActiveSync 4.x is included in the
Installation CD, which is compatible with the following operating
Installation CD, which is compatible with the following operating
systems and applications:
systems and applications:
Microsoft® Windows® 2000 Service Pack 4
Microsoft® Windows® 2000 Service Pack 4
Microsoft® Windows® Server 2003 Service Pack 1
Microsoft® Windows® Server 2003 Service Pack 1
Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1
Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1
Microsoft® Windows® Server 2003 x64 Edition Service Pack 1
Microsoft® Windows® Server 2003 x64 Edition Service Pack 1
Microsoft® Windows® XP Professional Service Packs 1 and 2
Microsoft® Windows® XP Professional Service Packs 1 and 2
Microsoft® Windows® XP Home Service Packs 1 and 2
Microsoft® Windows® XP Home Service Packs 1 and 2
Microsoft® Windows® XP Tablet PC Edition 2005
Microsoft® Windows® XP Tablet PC Edition 2005
Microsoft® Windows® XP Media Center Edition 2005
Microsoft® Windows® XP Media Center Edition 2005
Microsoft® Windows® XP Professional x64 Edition
Microsoft® Windows® XP Professional x64 Edition
Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and
Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and
Microsoft® Outlook® XP, and Microsoft® Outlook® 2003
Microsoft® Outlook® XP, and Microsoft® Outlook® 2003
messaging and collaboration clients
messaging and collaboration clients
Microsoft® Office 97, excluding Outlook
Microsoft® Office 97, excluding Outlook
Microsoft® Office 2000
Microsoft® Office 2000
Microsoft® Office XP
Microsoft® Office XP
Microsoft® Office 2003
Microsoft® Office 2003
Microsoft® Internet Explorer 4.01 or later (required)
Microsoft® Internet Explorer 4.01 or later (required)
Microsoft® Systems Management Server 2.0.
Microsoft® Systems Management Server 2.0
Some users of ActiveSync® 4.0 have reported challenges when
using the USB connection of their personal computer to connect
to a device with Windows Mobile 5.0. In many cases, these
challenges are likely caused by interoperability with desktop
firewall applications or applications that manage network traffic.
These applications appear to conflict with the TCP traffic between
a device and the PC.
An update for ActiveSync is scheduled to be available in late
November, but customers may also resolve the issue manually
immediately by visiting :
www.microsoft.com/windowsmobile/activesync4.
This issue only affects people with new devices just coming to
market and running Windows Mobile 5.0 software, and only
when synchronizing directly to a PC when using a USB connection
(wireless synchronization via Bluetooth, infra-red or directly to a
server or other services are not affected).
Appendix 151
A.3 Specifications
System Information
Processor
Intel PXA270 416Mhz
Memory
ROM: M-System 128MB NAND Flash
RAM: 64/ 128MB SDRAM
Operating System
Microsoft Windows Mobile Pocket PC
Phone Edition Magneto
Display
LCD Type
2.8” transflective TFT-LCD with back-light
LEDs, touch-sensitive screen
Resolution
240 x 320 pixels
Alignment Support
Portrait and Landscape
CDMA Module (Dual Band)
Functionality
CDMA2000
Mode
Dual band: 800, 1900 MHz
Yes
External Antenna
Camera Module
Type
1.3 mega-pixel camera with macro and
camera flash (place in the back)
Resolution
SXGA 1280x1024, VGA 640x480, QVGA
320x240, QQVGA 160x120, CIF352x288,
QCIF 176x144
Physical
Dimensions
Weight
108 (L) x 59 (W) x 23.7 (T) mm
186g (with battery)
152
Appendix
Controls and Lights
Buttons
5-way NAVIGATION control
Three program buttons: Voice
Recorder, Internet Explorer, CAMERA
Two phone functions : CALL and END
buttons
Volume control slider
POWER button
OK button
START button
RESET button
Keyboard
LEDs
QWERTY type, 39 keys
Right: Bi-color (Green and Red)
LED for CDMA network status, PDA
notification, and PDA charging status
Left: Bi-color (Blue and Green) LED for
Bluetooth and Wi-Fi status
Audio
Audio Controller
AGC
Microphone/
Speaker
Built-in/Dual, Hands-free
Headphone
AMR/AMRWB/AAC/MP3 stereo
Connections
Infrared
IrDA SIR
I/O port
MiniUSB, MiniSD
Antenna
External connector for CDMA
Stereo earphone/microphone jack
Audio
Expansion Slot
MiniSD card
Yes
Appendix 153
A.4 Warranty
ONE YEAR LIMITED WARRANTY
UTStarcom Personal Communications (“UTStarcom”) warrants to the original retail purchaser (“Purchaser”) that this UTStarcom product will
be free from defects in materials and workmanship under normal use for one year from the date of original purchase from UTStarcom or an
UTStarcom authorized reseller. Your dated sales receipt showing the date of purchase is your proof of the purchase date.
WARRANTY LIMITATIONS
Within the first twelve (12) months from date of purchase, UTStarcom’s sole obligation under this express warranty shall be to repair or replace
the defective product or parts (with new or rebuilt parts). If neither repair nor replacement is reasonably available, UTStarcom may in its sole
discretion, refund to Purchaser the purchase price paid for the product.
To obtain repairs or replacement within the terms of this warranty, the product should be delivered with proof of Warranty coverage (e.g. dated
bill of sale), the consumer’s return address, daytime phone number and/or fax number and complete description of the problem, transportation
prepaid, to the Company at the address shown below or to the place of purchase for repair or replacement processing.
THE EXTENT OF UTSTARCOM’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT AS PROVIDED ABOVE
AND, IN NO EVENT, SHALL UTSTARCOM’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
Accessory products, including those listed in the applicable UTStarcom catalogue, are not covered under this Limited Warranty.
UTStarcom shall not be responsible for Purchaser’s software, firmware, information or memory data contained in, stored on, or integrated
with any products returned to UTStarcom for repair, whether under warranty or not. UTStarcom is not liable for any damages caused by the
product or the failure of the product to perform, including lost profits, lost savings, incidental damages or consequential damages. UTStarcom
is not liable for any claim made by a third party or made by you for a third party.
This limited warranty does not apply to physical damage to the surface of the product, including breakage, cracks or scratches on the LCD or
outside casing. This limited warranty also does not extend to any product from which the serial number has been removed or to any product
that has been: (a) damaged or rendered defective by misuse, abuse, accident or other external causes; (b) subjected to unauthorized modifica-
tion, alteration or repair; or, (c) operated in an unsuitable environment or in a manner for which it is not intended. Purchasers will be charged
for all product repairs for damage or failure not covered by this limited warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF
THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY FO
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
Some states or jurisdictions do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequential damages for consumer products so the above exclusions or limitations may not apply to you. This Limited Warranty gives you
specific legal rights, and you may also have other rights that may vary from state to state or jurisdiction to jurisdiction. You are advised to
consult applicable laws for a full determination of your rights.
SOFTWARE
THIS UTSTARCOM PRODUCT MAY INCLUDE THIRD PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY THE APPLICABLE SOFTWARE
LICENSE, END-USER LICENSE OR PROGRAM LICENSE AGREEMENT. THIS LIMITED WARRANTY DOES NOT APPLY TO SUCH THIRD PARTY
SOFTWARE AND SUCH SOFTWARE IS PROVIDED “AS IS”. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE SOFTWARE LICENSE,
END-USER LICENSE OR PROGRAM LICENSE GOVERNING THE USE OF SUCH SOFTWARE OR THE DOCUMENTATION ACCOMPANYING
SUCH SOFTWARE.
UTStarcom does not warrant that any contained software products will meet Purchaser’s requirements or will work together with any hard-
ware or software products supplied by third parties, that the software products will be error free or that software defects will be corrected.
WARRANTY SERVICE
Purchaser must contact UTStarcom within the applicable warranty period to obtain warranty service authorization. UTStarcom is not respon-
sible for products or parts received without a warranty service authorization. BE SURE TO BACK UP DATA AND REMOVE ANY CONFIDENTIAL
PROPRIETARY, OR PERSONAL INFORMATION BEFORE RETURNING PRODUCT FOR SERVICE. UTSTARCOM IS NOT RESPONSIBLE FOR
DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA OR REMOVABLE STORAGE MEDIA. Repaired or replacement products will be shipped to
Purchaser at UTStarcom’s expense.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE
AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY MUST BE BROUGHT
WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
THE COMPANY SHALL NOT BE LIABLE FOR THE DELAY IN RENDERING SERVICE UNDER THIS WARRANTY OR LOSS OF USE DURING THE
TIME THE PRODUCT IS BEING REPAIRED OR REPLACED.
No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale
of this product.
Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or conse-
quential damage so the above limitation or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also
154
Appendix
have other rights which vary from state to state or province to province.
IN USA:
UTStarcom Personal Communications
555 Wireless Boulevard
Hauppauge, New York 11788
(800) 229-1235
IN CANADA: UTStarcom Canada Company
5535 Eglington Ave. W., Suite 234
Toronto, Ontario M9C 5K5
(800) 465-9672
Appendix 155
A.5 Index
Using Camera and Camcorder
112
A
CAMERA Button 9
Conference call 43
Connection
Connecting to Internet 72
Connecting to private
network 73
ActiveSync 46
Installing ActiveSync 47
Using ActiveSync 46
Adding and Removing Programs
63
Advanced options 119
Appointment 102
Connecting to Terminal Server
89
Contacts 104
B
D
Backing Up Files 66
Battery 11
Dial-up connections 83
Drawing and Writing on the
Screen 32
Block Recognizer 25
Bluetooth
Beaming information using
Bluetooth 80
E
Creating Bluetooth
partnership 79
E-mail and Text Messages
Composing 94
Turn on/off Bluetooth 78
Downloading 97
Forwarding 95
C
Setting up account 92
Editing pictures & videos 124
Emergency call 44
Calendar 102
Calibrate 13
Calling
From Call History 41
From Contacts 40
From Phone 40
Using Speed Dial 41
Camera 112
Exchange Server 49
F
Flight mode 38
Launching 112
Setting up the Camera 118
Template 114
H
Handwriting 26
Help 4,18
156
Appendix
Signing in/out of
MSN Messenger 100
I
Starting MSN Messenger 100
In-call Options 42
Indicators 17
Infrared (IR) 50
Input mode
Multi-Tap 31
Numeric 31
T9 30
Input Panel 22
Input Selector 22
Internet Exploer Mobile
History list 76
N
NAVIGATION Control 7
Network settings 73
Notes 108
Now Playing screen 128
O
On-screen keyboard 23
Owner information 58
Internet Explorer Mobile 74
Cookies and security settings
76
Favorites 74
P
Home page 74
Temporary Internet files 77
Introduction 22
Personalize 54
Personal and system settings 58
Phone Pad 30
Options screen 30
Phone settings 61
K
Physical Specifications 152
Playback screen 128
Keyboard 10
Keypad tone 62
R
L
Regulatory Notices 144
Resetting Your Device 70
Review screen 116
Ring tone 61
Letter Recognizer 24
Library screen 128
M
Ring type 62
Media synchronization settings
52
Blocking /unblocking contacts
100
S
Safety Information 147
Searching Information 35
Setting Date/Time/Language/
Regional options 56
Check status 101
Sending instant message 100
Appendix 157
Shortcuts 58
W
Sorting pictures & videos 124
Specifications 152
Starting Up 13
Storage card 35
Synchronizing 47
Windows Media Player
Controls 127
Supported file 126
Windows Media Player menus
128
Synchronizing Music, Video,
and Pictures 51
Wireless Modem 82
Synchronizing with Exchange
Server 49
Sync Setup Wizard 47
System Information 152
Z
Zoom 116
T
Tasks 106
Template 114
Terminal Services Client 89
Text Size 58
Today Screen
Today screen setting 54
Today screen background 125
Tools menu 119
Transcriber 26
U
USB cable 9
V
Video capture 115
View slideshows 123
Voicemail 2
158
Appendix
|
