3-232-538-12 (1)
FM/AM
Portable
CD Player
Operating Instructions
About the area code
The area code of the location in which you purchased the CD player
is shown on upper left of the bar code label on the package.
For accessories supplied with your CD player, check the area code
of your model and see “Accessories (supplied/optional).”
D-F20
© 2001 Sony Corporation
Table of Contents
Connecting a power source
Getting started
Using the dry batteries ............................... 17
Using the AC power adaptor ..................... 18
Notes on the power source ........................ 18
Locating the controls ................................... 4
Playing a CD
1. Prepare your CD player. .......................... 6
2. Insert a CD. ............................................. 6
3. Play a CD. ............................................... 6
Additional information
Precautions ................................................ 19
Maintenance .............................................. 19
Troubleshooting ......................................... 20
Specifications ............................................ 22
Accessories (supplied/optional) ................ 23
Playback options .................... 8
Using the radio
Listening to the radio ................................... 9
Presetting radio stations............................. 11
Playing preset radio stations ...................... 12
Changing the tuning interval ..................... 12
Available features
To maximize the skip protection performance
(ESP MAX) ........................................... 13
Emphasizing the bass sound (SOUND) .... 13
Protecting your hearing (AVLS) ................ 14
Locking the controls (HOLD) ................... 14
Turning off the operation beep sound........ 15
Connecting your CD player
Connecting a stereo system ....................... 16
3
Getting started
Locating the controls
For details, see pages in parentheses.
CD player (front)
1 i (headphones)
jack
8 u (play/pause)
button
(page 6)
(pages 6, 7)
2 OPEN button
9 x (stop)•RADIO OFF
button
(page 6)
(pages 7, 9, 11, 15)
q; Strap holes
3 SOUND/
PRESET –
button
(pages 11 - 13)
qa DC IN 4.5 V
(external power
input) jack
4 VOLUME
control
(page 18)
(page 6)
5 MENU/PRESET +
button
(pages 8, 11, 12)
qs ./>
(AMS/search) •
TUNE –/+ buttons
(pages 7 - 9, 11)
6 RADIO ON•BAND/
MEMORY button
(pages 9 - 12)
7 Display
qd HOLD switch
(pages 8 - 14)
(page 14)
4
CD player (inside)
CD player (rear)
qh LOCAL/DX switch
(page 10)
qf ESP switch
(page 13)
qg AVLS switch
qj STEP switch
(page 12)
(page 14)
qk Battery compartment
(pages 6, 17)
5
Playing a CD
You can also use house current (AC power adaptor) as a power source.
1 Open the battery compartment
1. Prepare your CD player.
lid.
1 Insert LR6 (size AA) betteries.
2 Connect the headphones.
2 Insert two LR6 (size AA)
alkaline batteries by matching
the 3 to the diagram in the
battery compartment.
to i
(headphones)
Headphones
u button
2. Insert a CD.
See “Using the dry batteries.”
1 Press OPEN to open the lid.
Note
Be sure to remove the AC power adaptor
when using the dry batteries.
OPEN
button
3. Play a CD.
2 Place the CD on the tray and close
the lid.
Press u.
Label
side up
Adjust the volume.
6
To
Press
Play/Pause
u
x*2
Stop
Find the beginning of the current track (AMS*1)
Find the beginning of the previous tracks (AMS)
Find the beginning of the next track (AMS)
Find the beginning of the succeeding tracks (AMS)
Go backwards quickly
.once quickly*2
.repeatedly*2
> once quickly*2
> repeatedly*2
Hold down .*2
Hold down >*2
Go forward quickly
*1 Automatic Music Sensor
*2 These operations can be done during both play and pause.
About the display
• When you press u after changing the CD or turning off and on the player, the total number
of tracks in the CD and total playing time appear for about two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• During pause, the elapsed playing time flashes.
If the volume level does not increase
Is AVLS set to “LIMIT”? Set AVLS to “NORM.” For details, see “Protecting your hearing
(AVLS).”
About CD-Rs
This CD player is compatible with CD-Rs but playback capability may vary depending on the
quality of the disc, the recording device and application software.
Removing the CD
Remove the CD while pressing the pivot in the
center of the tray.
7
Playback options
You can enjoy various ways of playback using MENU.
Display
MENU button
Each time you press the button, you can
change the playback mode.
Play mode indication
“ No indication”
(Normal play)
“
”
(Play all tracks repeatedly)*
“ 1”
(Play a single track)
“
1”
(Play a single track repeatedly)
“
SHUF”
(Play tracks in random order
repeatedly)
* During Repeat play, you can locate the first track
after the last track by pressing > repeatedly.
You can also locate the last track after first track
by pressing . repeatedly.
./>
buttons
8
Using the radio
Once you’ve preset the stations, you can easily tune in the station by pressing PRESET + or –
button.
Listening to the radio
You can enjoy FM and AM programs.
Press RADIO ON•BAND to turn on the radio.
1
Press RADIO ON•BAND until the band you want appears.
2
Each time you press the button, the display changes as follows:
FM1
FM2
FM3
FM4
FM5
AM
Press TUNE + or – to tune in the
station you want and adjust the
volume.
3
To turn off the radio
Press x•RADIO OFF.
To tune in the station quickly
Hold down TUNE + or – in step 3 until the frequency digits begin to change in the display. The
CD player automatically scans the radio frequencies and stops when it finds a clear station.
(Continued)
9
Listening to the radio
To improve broadcast reception
For FM, extend the headphones cord.
Headphones
For AM, reorient the CD player itself.
Note
Keep the headphones connected to the i jack of the CD player. The headphones cord works as the FM
antenna.
If it is hard to hear the FM broadcast
Set the LOCAL/DX switch to “LOCAL” using a pointed material.
Under the normal conditions, set to “DX.”
When listening to the radio on batteries
If you connect the external power source plug to the DC IN 4.5 V jack of your CD player, the CD
player will turn off. Turn it on by pressing RADIO ON•BAND to continue listening to it.
10
Presetting radio stations
You can store radio stations into the CD player’s memory. You can preset up to 30 stations, 5 for
each band (FM1 - 5 and AM) in any order.
Press RADIO ON•BAND to turn on the radio.
1
Press RADIO ON•BAND to select the band.
2
Hold down MEMORY until “PRESET” flashes in the display.
3
From this step on, start the next operation within 10 seconds after you finished the previous
operation. If 10 seconds pass with nothing done, “PRESET” stops flashing which shows that
the CD player has exited the PRESET MEMORY standby mode. If this happens, start from
step 3 again.
Press PRESET + or – repeatedly to select the preset number you want to store
the station on while “PRESET” flashes.
4
Press TUNE + or – to tune in the station you want while “PRESET” flashes.
5
Press MEMORY.
6
When the station is preset successfully, the beep sounds and “PRESET” stops flashing in the
display. The new station replaces the old one.
FM:
AM:
After 2 seconds, “PRESET” starts flashing again and the CD player enters the PRESET
MEMORY standby mode.
Repeat steps 4 to 6 when you preset the stations in the same band. When you
preset the stations in the different band, repeat steps 2 to 6 after “PRESET”
stops flashing.
7
To exit the PRESET MEMORY standby mode
When the radio is turned on, you can exit the PRESET MEMORY standby mode using one of
the following procedures. Preset stations, however, will remain stored in the CD player’s
memory.
• Hold down MEMORY until “PRESET” stops flashing.
• Do not press any button for 10 seconds. “PRESET” stops flashing.
• Press u. The CD player enters the CD playing mode.
• Press x•RADIO OFF. The radio turns off.
(Continued)
11
Presetting radio stations
To cancel all preset stations
1 Disconnect the power source (alkaline batteries or AC power adaptor).
2 While you press and hold down MEMORY, insert alkaline batteries or connect the AC power
adaptor again.
The indications in the display keep flashing until all preset stations are cleared, then stop
flashing and disappear from the display.
Playing preset radio stations
You can tune in the station easily by pressing PRESET + or – button.
Press RADIO ON•BAND to select the band.
1
Press PRESET + or – to tune in a stored station.
2
Changing the tuning interval
When using the CD player abroad, change the AM tuning interval, if necessary. Set the STEP
switch (in the battery compartment) to “9 kHz” or “10 kHz” using a pointed material.
9 kHz area: Asia and Europe
10 kHz area: the U.S.A., Canada and South America
Notes
• The interval will not change until you once turn off the radio and then turn it on again.
• After changing the tuning interval, you need to preset radio stations again.
12
B Available features
To maximize the skip
protection performance
(ESP MAX)
Emphasizing the bass
sound (SOUND)
You can emphasize the bass-boosted sound.
The typical ESP (Electronic Shock
Press SOUND to select “BASS
” or
Protection) function minimizes skipping by
using a buffer memory that stores music data
and plays it back in the event of a shock.
The ESP MAX system is an extremely
sophisticated technology. Due to the light
weight and improved anti-shock
“BASS
.”
“ No indication”
(Normal play)
characteristics of the optical block, this
BASS
BASS
system recovers from the skipping much
quicker than conventional technology such as
ESP or ESP2.*
* Although ESP MAX provides excellent
protection, skipping may occasionally occur.
Set ESP (under the lid) to “ON.”
The selected sound mode is displayed.
“BASS
more than “BASS
” enhances the bass sound
.”
Notes
Displayed when the ESP MAX function is
working.
• If the sound is distorted when using the SOUND
function, turn down the volume.
• When listening to the radio, the SOUND function
does not work.
To turn off the ESP MAX function
Set ESP to “OFF.”
Notes
• Playing may stop when the CD player gets a
strong shock even with the ESP MAX function
on.
• You may hear a noise or sound may skip:
– when listening to a dirty or scratched CD,
– when listening to an audio test CD,
– when the player receives continuous shock or
– when using poor-quality CD-Rs or if there is a
problem with the recording device or
application software.
13
Protecting your hearing
Locking the controls
(AVLS)
(HOLD)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your hearing.
You can lock the controls on your CD player
to prevent accidental button presses.
Slide HOLD in the direction of the
arrow.
Set AVLS (under the lid) to “LIMIT.”
Displayed when the HOLD function is
working.
Displayed when “ LIMIT” is selected and
AVLS function is working.
To unlock the controls
To turn off the AVLS function
Slide HOLD in the opposite direction of the
arrow.
Set AVLS to “NORM.”
14
Turning off the
operation beep sound
You can turn off the beep sound that is heard
from your headphones when you operate
your CD player.
Remove the power source (dry
batteries or AC power adaptor)
from the CD player.
1
Connect the power source while
pressing x on the CD player.
2
To turn on the beep sound
Remove the power source and then connect
the power source without pressing x.
15
B Connecting your CD player
Notes
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape.
For details, see the instruction manual that
comes with the connected device.
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• We recommend that you use the AC power
adaptor (not supplied) for recording. If you use
the dry batteries as a power source, they may
become completely depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
Be sure to turn off all connected devices
before making connections.
to i
Connecting cord
Left (white)
Right (red)
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
16
B Connecting a power source
Notes
• The indicator sections of
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
You can use the following power sources:
• LR6 (size AA) alkaline batteries (see
“Playing a CD”)
roughly shows the
• AC power adaptor
For the battery life, see “Specifications.”
sections of
may increase or decrease.
To attach the battery compartment lid
If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.
Using the dry batteries
For inserting procedure, see “Playing a CD.”
To remove the batteries
Remove the batteries as illustrated below.
(rear)
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
r
r
Battery power is getting low.
r
r
Battery power is low.
Lo batt* Batteries are depleted.
* Beep sounds.
When the batteries are depleted, replace both
batteries with new ones.
17
Using the AC power
adaptor
Notes on the power
source
Connect the AC power adaptor (not supplied)
to the DC IN 4.5 V jack and an AC outlet.
Disconnect all power sources when the CD
player is not used.
On AC power adaptor
• Use only the AC power adaptor
to an AC outlet
recommended in “Accessories (supplied/
optional).” Do not use any other AC power
adaptor. It may cause a malfunction.
Polarity of the plug
to DC IN 4.5 V
• When disconnecting the AC power adaptor
from the AC outlet, grasp the adaptor
itself. Do not pull it by the cord.
• Do not touch the AC power adaptor with
wet hands.
On dry batteries
• Do not charge the dry batteries.
• Do not throw the batteries into fire.
• Do not carry the batteries with coins or
other metallic objects. It can generate heat
if the positive and negative terminals of the
battery are accidentally contacted by a
metallic object.
• Do not mix rechargeable batteries with dry
batteries.
• Do not mix new batteries with old ones.
• Do not use different types of batteries
together.
• When the batteries are not to be used for a
long time, remove them.
• If battery leakage occurs, wipe off any
deposit in the battery compartment, and
install new batteries. In case the deposit
adheres to you, wash it off thoroughly.
18
B Additional information
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts. Do not
leave the CD in a car parked under direct
sunlight.
Precautions
On safety
• Should any solid objects or liquid fall into
the CD player, unplug it and have it
checked by qualified personnel before
operating it any further.
On headphones/earphones
Road safety
Do not use headphones/earphones while
driving, cycling, or operating any motorized
vehicle. It may create a traffic hazard and is
illegal in some areas. It can also be
potentially dangerous to play your headsets
at high volume while walking, especially at
pedestrian crossings. You should exercise
extreme caution or discontinue use in
potentially hazardous situations.
• Do not put any foreign objects in the DC
IN 4.5 V (external power input) jack.
On the CD player
• Keep the lens on the CD player clean and
do not touch it. If you do so, the lens may
be damaged and the CD player will not
operate properly.
• Do not put any heavy object on top of the
CD player. The CD player and the CD may
be damaged.
• Do not leave the CD player in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust or sand,
moisture, rain, mechanical shock,
unleveled surface, or in a car with its
windows closed.
• If the CD player causes interference to the
radio or television reception, turn off the
CD player or move it away from the radio
or television.
Preventing hearing damage
Avoid using headphones/earphones at high
volume. Hearing experts advise against
continuous, loud and extended play. If you
experience a ringing in your ears, reduce
volume or discontinue use.
Consideration for others
Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate to the people around you.
• Discs with non-standard shapes (e.g.,
heart, square, star) cannot be played on this
CD player. Attempting to do so may
damage the CD player. Do not use such
discs.
Maintenance
To clean the casing
Use a soft cloth slightly moistened in water
or a mild detergent solution. Do not use
alcohol, benzine or thinner.
On handling CDs
• To keep the CD clean, handle it by its
edge. Do not touch the surface.
• Do not stick paper or tape onto the CD.
Not these ways
19
Troubleshooting
Should any problem persist after you have checked these symptoms, consult your nearest Sony
dealer.
CD player
Symptom
Cause and/or corrective actions
The volume does not increase
even if the VOLUME control is
adjusted to the maximum
level.
c
Set the AVLS switch to “NORM.” (page 14)
No sound, or noise is heard.
c
c
Connect the plugs firmly. (pages 6, 18)
Plugs are dirty. Clean the plugs with a dry soft cloth periodically.
The playing time is too short
when powered with the dry
batteries.
c
Check that you are using alkaline batteries and not manganese
batteries. (page 6)
Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 6)
c
When you press u, “ Lo
batt” or “ 00” appears in the
display. The CD does not
play.
c
Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 6)
“ HI dc In” appears in the
display.
c
c
Use only the AC power adaptor or car battery cord in “Accessories
(supplied/optional).” (page 23)
Remove all power sources, then insert the batteries or connect the
AC power adaptor again. (pages 6, 18)
The CD does not play or
“ no dISC” appears in the
display when a CD is placed
in the CD player.
c
c
c
c
The buttons are locked. Slide the HOLD switch back. (page 14)
The CD is dirty or defective. (page 19)
Check that the CD is inserted with the label side up. (page 6)
Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c
Close the lid of the battery compartment firmly.
(page 6)
c
c
c
Make sure the batteries are inserted correctly. (page 6)
Connect the AC power adaptor to an AC outlet securely. (page 18)
The CD-R was not finalized. Finalize the CD-R with the recording
device.
c
c
There is a problem with the quality of the CD-R, recording device,
or application software.
“ Hold” appears in the
display when you press a
button, and the CD does not
play.
The buttons are locked. Slide the HOLD switch back. (page 14)
The rechargeable batteries
cannot be charged in the
battery compartment of this
player.
c
c
This CD player does not have the function to charge the
rechargeable batteries.
Playback starts from the
point you stopped. (resume
function)
The resume function is working. To start from the first track, open
the lid of the CD player; or remove all power sources, then insert
the batteries or connect the AC power adaptor again. (pages 6, 18)
20
Radio
Cause and/or corrective actions
Symptom
c
Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 6)
Move the CD player away from the TV.
The audio is weak or has poor
quality.
c
21
Radio
Specifications
CD player
Frequency range (STEP switch)
9 kHz step:
FM: 87.5 - 108.0 MHz
AM: 531 - 1 710 kHz
10 kHz step:
System
Compact disc digital audio system
FM: 87.5 - 108.0 MHz
AM: 530 - 1 710 kHz
Laser diode properties
Material: GaAlAs
Wavelength: λ = 780 nm
Antenna
FM: Headphones cord antenna
AM: Built-in ferrite bar antenna
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
General
Power requirements
D-A conversion
1-bit quartz time-axis control
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
• Two LR6 (size AA) batteries: 3 V DC
• AC power adaptor (DC IN 4.5 V jack):
U2/U/CA2/E92/MX2/TW2/BR3 model:
120 V, 60 Hz
Frequency response
20 - 20 000 Hz +–12 dB (measured by EIAJ CP-
307)
Output (at 4.5 V input level)
Headphones (stereo minijack)
Approx. 12 mW + Approx. 12 mW at 16 Ω
CED/CET/CEW/CEX/CE7/EE/EE1/E13/G5/
G6/G7/G8/BR1 model:
220 - 230 V, 50/60 Hz
CEK/3CE7 model: 230 - 240 V, 50 Hz
AU2 model: 240 V, 50 Hz
JE.W/E33/EA3/KR4 model: 100 - 240 V,
50/60 Hz
HK2 model: 220 V, 50/60 Hz
AR1/CN2 model: 220 V, 50 Hz
22
Battery life* (approx. hours)
(When you use the CD player on a flat and stable
surface.)
Accessories
(supplied/optional)
Supplied accessories
Playing time varies depending on how the CD
player is used.
For the area code of the location in which you
purchased the CD player, check the upper left side
of the bar code on the package.
When using
ESP
on
RADIO
on
off
Headphones (1)
Two Sony alkaline 24
batteries LR6SG
25
66
Optional accessories
* Measured value by the standard of JEITA (Japan
Electronics and Information Technology
Industries Association).
**Charging time varies depending on how the
rechargeable battery is used.
AC power adaptor
Active speaker system
Car battery cord
AC-E45HG
SRS-A21
DCC-E345
Car battery cord with car connecting pack
DCC-E34CP
Operating temperature
Car connecting pack
Connecting cord
CPA-9C
5°C - 35°C (41°F - 95°F)
RK-G129
RK-G136
Dimensions (w/h/d) (excluding
projecting parts and controls)
Approx. 161 × 26.3 × 130.3 mm
(6 3⁄8 × 1 1⁄16 × 5 1⁄4 in.)
Earphones
MDR-E848LP
MDR-EX70LP
Headphones
MDR-A44L
MDR-A110LP
Mass (excluding accessories)
Approx. 210 g (7.5 oz.)
Design and specifications are subject to change
without notice.
Your dealer may not handle some of the
above listed accessories. Please ask the
dealer for detailed information about the
accessories in your country.
23
This warranty is valid only in the United States.
Sony Corporation Printed in China
|