Sony Ericsson K220C User Manual

Sony Ericsson K220c Additional inform  
Contents  
Congratulations on your purchase of the Sony Ericsson  
K220c. For additional phone content, go to  
Register now to get free online storage and special offers  
For product support, go to www.sonyericsson.com/cn.  
1
This is the Internet version of the user's guide. © Print only for private use.  
Sony Ericsson  
GSM 900/1800  
This User guide is published by Sony Ericsson Mobile Communications  
AB or its local affiliated company, without any warranty. Improvements  
and changes to this User guide necessitated by typographical errors,  
inaccuracies of current information, or improvements to programs and/or  
equipment, may be made by Sony Ericsson Mobile Communications AB  
or its local affiliated company at any time and without notice. Such  
changes will, however, be incorporated into new editions of this User  
guide.  
All rights reserved.  
© Sony Ericsson Mobile Communications AB, 2007  
Publication number: EN/LZT 108 9389 R2A.  
Please note:  
Some of the services in this User guide are not supported by all networks.  
This also applies to the GSM International Emergency Number 112.  
Please contact your network operator or service provider if you are in  
doubt whether you can use a particular service or not.  
Please read the Guidelines for safe and efficient use and the Limited  
warranty chapters before you use your mobile phone.  
Your mobile phone has the capability to download, store and forward  
additional content, e.g. ringtones. The use of such content may be  
restricted or prohibited by rights of third parties, including but not limited  
to restriction under applicable copyright laws. You, and not Sony  
Ericsson, are entirely responsible for additional content that you download  
to or forward from your mobile phone. Prior to your use of any additional  
content, please verify that your intended use is properly licensed or is  
otherwise authorized. Sony Ericsson does not guarantee the accuracy,  
integrity or quality of any additional content or any other third party  
content. Under no circumstances will Sony Ericsson be liable in any way  
for your improper use of additional content or other third party content.  
The marble logo is a trademark or registered trademark of Sony Ericsson  
Mobile Communications AB. Sony is a trademark or registered trademark  
of Sony Corporation. Ericsson is a trademark or registered trademark of  
Telefonaktiebolaget LM Ericsson.  
T9™ Text Input is a trademark or a registered trademark of Tegic  
Communications.  
2
This is the Internet version of the user's guide. © Print only for private use.  
 
User guide symbols  
The following instruction symbols appear in this User  
guide:  
This arrow points you to a page with more  
information.  
%
Use the navigation key to scroll and the selection  
key to select.  
}
Note  
This symbol indicates that a service or function is  
network-or subscription-dependent. Because of  
this, all menus may not be available in your phone.  
Please contact your network operator for more  
information.  
4
This is the Internet version of the user's guide. © Print only for private use.  
Getting started  
1
2
8
9
3
4
5
10  
11  
12  
6
7
1
2
Infrared port  
6
Keylock  
Headset and battery  
charger connector  
Strength of GSM network  
7
3,9 Function of selection key  
4,10Selection keys  
8
Battery status  
Navigation key with  
shortcuts  
11  
5
Call key  
12 End Call/On-Off key  
5
This is the Internet version of the user's guide. © Print only for private use.  
 
Keypad  
Press the navigation key left  
to navigate.  
right  
up  
down  
Press  
to select the options shown immediately  
above these keys on the screen.  
To go back one level or end a function  
Press the right selection key  
in the menus.  
to go back one level  
Press  
to end a function and go to standby.  
Shortcuts  
From standby, you can use the navigation keys to go  
directly to a function:  
Press  
Press  
Press  
Press  
to write a text or picture message.  
to go to the camera.  
to turn the radio on.  
to go to your contacts.  
6
This is the Internet version of the user's guide. © Print only for private use.  
   
To set the phone to silent  
From standby, press and hold  
.
To lock or unlock the keypad  
To avoid dialling a number by accident, press  
and  
select Lock keys.  
To unlock the keypad, press  
and select Unlock.  
% 55 Keypad lock for more information.  
To turn the screen light on  
Press any key to turn the screen light on.  
SIM card  
When you register as a subscriber with a network  
operator, you get a SIM (Subscriber Identity Module) card.  
The SIM card keeps track of your phone number, the  
services included in your subscription, and your contact  
information, among other things.  
If you have been using a SIM card in another phone,  
make sure that your information is saved to the SIM  
card before you remove it from the other phone.  
7
This is the Internet version of the user's guide. © Print only for private use.  
         
PIN (Personal Identification Number)  
You may need a PIN (Personal Identification Number) from  
your network operator to activate the services in your  
phone.  
Each PIN digit appears as *, unless it starts with  
emergency number digits, for example 112. This is so that  
you can see and call an emergency number without  
entering a PIN % 17 Emergency calls. Press the right  
selection key  
to correct mistakes.  
If you enter the wrong PIN three times in a row, the  
SIM card is blocked and the message PIN blocked  
appears. To unblock it, you need to enter your PUK  
(Personal Unblocking Key) % 55 SIM card lock.  
8
This is the Internet version of the user's guide. © Print only for private use.  
 
Set up your phone  
Insert the SIM card, attach and charge the battery and  
turn on your phone.  
To insert the SIM card and battery  
1 Gently pull the cover away from the phone.  
2 Insert the SIM card. Make sure the SIM card is placed  
under the silvery holders and that the contacts of the  
SIM card face downwards.  
3 Place the battery on the back of the phone with the  
label side up and the connectors facing each other.  
4 Replace the cover as shown in the picture.  
9
This is the Internet version of the user's guide. © Print only for private use.  
     
To charge the battery  
30 min  
2.5 h  
1 Connect the battery charger to the phone.  
2 It may take up to 30 minutes before the battery icon  
appears on the screen.  
3 Wait approximately 2.5 hours or until the battery icon  
indicates that the battery is fully charged. If you do not  
see the battery icon after this time, press any key above  
the number keys to activate the screen.  
4 Remove the battery charger by tilting it upwards.  
The time and date are reset when you remove the  
battery.  
10  
This is the Internet version of the user's guide. © Print only for private use.  
 
To turn on the phone  
1 Press and hold  
until the screen lights up.  
2 Enter your PIN code, if requested and select OK. Each  
digit appears as *. Press the right selection key  
correct mistakes. If the screen turns dark, press any  
key to illuminate the screen.  
to  
3 Scroll to a language and select Select.  
4 Enter the time and select Save.  
5 Enter the date and select Save.  
If you enter the wrong PIN three times in a row, the  
SIM card is blocked. To unblock it % 56 To unblock  
To turn off the phone  
Press and hold  
.
Standby  
After you have turned the phone on and entered your PIN,  
the name of your operator appears on the screen. This is  
called standby – you can now make and receive calls.  
% 52 Networks for details.  
11  
This is the Internet version of the user's guide. © Print only for private use.  
     
Navigating the phone menus  
From standby select Menu to go to the main menu. The  
first menu you will see is Messaging.  
Press up  
or down  
to scroll through the menus.  
You can change the appearance of the main menu.  
To change the main menu view  
1 From standby select Menu } Settings } Advanced  
} Main menu view.  
2 Select Grid view or Single icon.  
12  
This is the Internet version of the user's guide. © Print only for private use.  
   
Icons  
These icons appear on the screen to show status and new  
events.  
Icon Description  
Shows the strength of the GSM network signal.  
Five blue bars mean full network coverage  
Shows the battery status. A green battery means  
You have received a new text or voice* message.  
You have received a new picture message.  
The phone is set to silent. % 7 To set the phone to  
The keypad is locked. % 55 Keypad lock  
An alarm is activated. % 50 Alarm clock/Alarms  
Divert calls* is activated. % 18 Diverting calls  
For more information, see www.sonyericsson.com/cn.  
* Some items may be operator-, network- and  
subscription-dependent.  
13  
This is the Internet version of the user's guide. © Print only for private use.  
 
Menu overview  
Some additional operator-, network- and  
subscription-dependent menus may occur.  
Extras  
Calendar  
Timer  
Internet*  
Homepage  
Bookmarks  
Radio  
Stopwatch  
Calculator  
My files  
Go to URL  
Edit bookmark  
Show pictures  
Push access  
Push inbox  
My Games  
Clear cache  
Internet profile  
Camera  
Capture  
Camera pics  
Slide show  
Messaging  
Alarms*  
Settings  
Text message  
Picture message  
Settings  
Calls  
Contacts  
Call list  
Time and cost  
Call settings  
View contacts  
Add contact  
My number  
Sound & alerts  
Wallpaper  
Theme  
Voicemail  
Delete contacts  
Time and date  
Language  
Speed dial  
Select network  
Infrared port  
Advanced  
Copy all contacts  
Send contacts  
Settings  
Phone status  
* These menus appear in grid view. In single icon view they  
14  
This is the Internet version of the user's guide. © Print only for private use.  
 
Calling  
Making and receiving calls  
Turn on the phone and make sure you are within range of  
a network to make and receive calls % 11 To turn on the  
If your subscription includes the Calling Line Identification  
service and the caller’s number is identified, the number is  
displayed. If you have saved the number in Contacts, the  
name is displayed with an incoming call.  
To make a call  
1 Enter the area code and phone number.  
2 Press  
to call. Press  
to end the call.  
To answer or reject a call  
Press  
Press  
to answer a call.  
to reject a call.  
To turn off the ringtone when receiving a call  
Select Silent to turn off the ringtone without answering the  
call.  
15  
This is the Internet version of the user's guide. © Print only for private use.  
     
To change the ear speaker volume during a call  
Press  
to increase the volume and  
to decrease the  
volume.  
To select more options during a call  
Select Options.  
To make international calls  
1 Press and hold  
until a + sign appears.  
2 Enter the country/region code, area code (without the  
leading zero), phone number and press  
.
To put a call on hold  
1 Press  
during a call to put it on hold.  
2 select Retrieve to resume the call.  
To turn off the microphone during a call  
1 Select Options } Turn off mic..  
2 To turn on the microphone again, select Mic. on.  
To check your missed calls  
1 When Missed calls: is displayed, select Details to  
display the missed calls.  
2 To call a number, scroll to the number and press  
.
16  
This is the Internet version of the user's guide. © Print only for private use.  
         
Handsfree  
Connect the headset to your phone, see % 5 Getting  
To answer a call with the handsfree  
Press the button on the headset or press  
phone.  
on the  
Call list  
Information about the last 30 calls is saved in Call list.  
indicates that you have missed a call.  
To call a number from the call list  
1 From standby press  
and scroll to one of the  
numbers.  
2 Press  
to call.  
To clear a number from the call list  
1 From standby press  
numbers.  
and scroll to one of the  
2 Select Options } Delete } Yes.  
Emergency calls  
Your phone supports the international emergency  
numbers, for example 112 and 911. This means that these  
numbers can normally be used to make an emergency call  
in any country/region, with or without a SIM card inserted,  
if a GSM network is in range.  
In some countries/regions, your network operator  
may have saved additional local emergency numbers  
on the SIM card.  
17  
This is the Internet version of the user's guide. © Print only for private use.  
     
To make an emergency call  
Enter, for example, 112 and press  
selection key to correct mistakes.  
. Press the right  
Diverting calls  
If you cannot answer incoming calls, you can divert them  
to another number, for example, your answering service.  
When the Restrict calls function is activated, some  
Divert call options are not available.  
To activate a call divert  
1 From standby select Menu } Calls } Call settings  
} Divert all calls.  
2 Select an option.  
3 Select Activate.  
4 To divert the calls to your voicemail, select Divert calls  
to voicemail. To find the contact you want your calls to  
be diverted to, select Divert to saved contact. To enter  
the phone number you want your calls to be diverted  
to, select Enter number to divert to.  
To deactivate a call divert  
Select the divert option and then select Deactivate.  
Call waiting service  
When call waiting is activated, you hear a beep if you  
receive a second call.  
To activate the call waiting service  
From standby select Menu } Calls } Call settings  
} Call waiting } Activate.  
18  
This is the Internet version of the user's guide. © Print only for private use.  
     
Receiving a second call  
When call waiting is activated and you receive a second  
call your phone will beep.  
You can:  
Select Answer to answer the incoming call and put the  
ongoing call on hold.  
Select Busy to show the second caller that you are  
busy.  
Select Replace active call to end the first call and  
answer the second call.  
Handling two calls  
If you have an ongoing call and a call on hold, you can:  
Select Switch to switch between the two calls.  
Press twice to end both calls.  
You cannot answer a third call without ending or  
replacing one of the first two calls or joining them  
into a conference call.  
Conference calls  
Conference call supports only three participants including  
yourself. A conference call is started by joining an ongoing  
call and a call on hold.  
To join the two calls into a conference call  
After having answered a second call:  
Select Options } Join calls to join the two calls.  
Select Options } Release party to release one party,  
select name or number of the party to release.  
Press  
twice to end both calls.  
Contact your network operator to check if this  
function is supported.  
19  
This is the Internet version of the user's guide. © Print only for private use.  
   
To add a new participant  
1 To put the ongoing call on hold, press  
.
2 Enter the number you want to call and press  
3 To end the second call, press  
.
.
4 To continue the first call, select Retrieve.  
My number  
You can view and edit your own phone number(s).  
To check your own phone number  
From standby select Menu } Contacts } My number. If  
your number is not automatically loaded from the SIM  
card, you can enter it yourself.  
Restricted dialling  
Restrict outgoing and incoming calls when at home or  
abroad. You need a password from your service provider.  
If you divert incoming calls, you cannot activate  
some restricted dialling options.  
To activate call restriction  
1 From standby select Menu } Calls } Call settings  
} Restrict calls and select an option.  
All outgoing – all outgoing calls.  
Outgoing intl – all outgoing international calls.  
Outgoing intl roam. – all outgoing international  
calls except to your home country/region.  
All incoming – all incoming calls.  
Inc. when roaming – all incoming calls when you  
are abroad (when roaming).  
20  
This is the Internet version of the user's guide. © Print only for private use.  
   
Deactivate all – enter password to deactivate all  
restrictions.  
Change password – change the password needed  
to activate call restrictions.  
2 Select Activate.  
3 Enter your password and select OK.  
To cancel all call restrictions  
1 From standby select Menu } Calls } Call settings  
} Restrict calls } Deactivate all.  
2 Enter your password and select OK.  
Call time and cost balance  
You can check call time, the amount of sent messages  
and used data bytes. SIM may support cost balance but  
this is operator dependant.  
To check call time, sent messages and data bytes  
From standby select Menu } Calls } Time and cost.  
To reset time and cost counter  
1 From standby select Menu } Calls } Time and cost.  
2 Select Reset } Yes.  
Showing or hiding your phone number  
If your subscription supports CLIR (Calling Line  
Identification Restriction), you can hide your phone  
number for people you call.  
To show or hide your phone number  
From standby select Menu } Calls } Call settings } Hide/  
show no. and select an option.  
21  
This is the Internet version of the user's guide. © Print only for private use.  
   
Contacts  
You can save names and numbers in Contacts.  
To add a contact  
1 From standby select Menu } Contacts } Add contact.  
Select Save on SIM if you want the contact to be  
saved on the SIM card.  
Select Save in phone if you want the contact to be  
saved in the phone.  
2 Enter the name and select Options } OK.  
3 Scroll to the icon below the name.  
4 Enter the number and select OK.  
5 Select Save contact.  
To call a contact  
To call a name written in Chinese characters  
1 From standby press  
.
2 Scroll to the contact you want to call; or press and hold  
to switch the search mode to the Chinese, then  
enter the first Pinyin letter of the name you want to call.  
3 Select the contact and press  
.
22  
This is the Internet version of the user's guide. © Print only for private use.  
   
To call a name written in Latin characters  
1 From standby press  
.
2 Scroll to the contact you want to call; or press and hold  
to switch the search mode to the English, then  
enter the first letters of the name you want to call.  
3 Select the contact and press  
.
To edit a contact  
1 From standby press  
.
2 Scroll to and select the contact.  
3 Select Options } Edit.  
4 Edit the information and select Options } Save  
contact.  
The option Edit, then call is a temporary change of  
the contact and will not be saved in the memory.  
To delete a contact  
1 From standby press  
.
2 Scroll to and select the contact.  
3 Select Options } Delete contact } Yes.  
Enter the + sign and country/region code with all  
contact numbers. They can then be used abroad or at  
Contacts memory  
The number of entries you can save in Contacts depends  
on the capacity of your phone and SIM card.  
To check the Contacts memory status  
From standby select Menu } Contacts } Settings  
} Memory status.  
23  
This is the Internet version of the user's guide. © Print only for private use.  
Voice messages  
If your subscription includes an answering service, callers  
can leave a voice message when you cannot answer  
a call.  
To call your voicemail service  
From standby, press and hold  
voicemail number in the phone.  
, if you have saved your  
To enter your voicemail number  
1 From standby select Menu } Contacts } Voicemail.  
2 Add voicemail number? appears. Select Yes.  
3 Enter the voicemail number that you get from your  
service provider and select Save.  
24  
This is the Internet version of the user's guide. © Print only for private use.  
   
Messaging  
Your phone supports various messaging services.  
Contact your service provider about the services you can  
use or for more information, see www.sonyericsson.com/cn.  
Before you start  
If the number to your service centre is not saved on your  
SIM card, you must specify the number yourself,  
otherwise you cannot reply to received messages or send  
your own. Your service centre number is usually provided  
with your SIM card. If you do not have your service centre  
number, please contact your service provider.  
To check or add a service centre number  
1 From standby select Menu } Messaging } Settings  
} Text message } Service centre. The number is  
shown if it is saved on the SIM card.  
2 If there is no number, enter it, including the international  
“+” sign and country/region code. Select Save.  
Text messages  
Text messages can be sent to a mobile phone number or  
to a contact.  
To receive text messages  
1 Read now? appears. Select View.  
2 Scroll to the unread message and select Read.  
25  
This is the Internet version of the user's guide. © Print only for private use.  
         
Inbox and Unsent  
Received messages are saved in Inbox. Messages that  
fail to be sent are saved in Unsent.  
To read text messages  
1 From standby select Menu } Messaging } Text  
message } Inbox.  
2 Scroll to a message and select Read.  
represents  
unread messages.  
Entering letters and characters  
There are two methods to enter letters and characters:  
Multitap text input  
T9™ Text Input  
To change writing method  
When you enter letters, press and hold  
between Multitap and T9™ text input.  
to switch  
To write and send a text message  
1 From standby press  
.
2 Select Text message and write your message. Select  
Options, for example, to add a symbol.  
3 When the message is ready, select Options } Send  
message.  
26  
This is the Internet version of the user's guide. © Print only for private use.  
   
4 Retrieve a recently used number, or look-up from  
contacts, or enter phone number.  
5 Select Send message.  
To send the text message to an email address you  
need to set the default message type to email  
To enter letters using multitap text input  
Press  
appears.  
Press  
Press  
Press  
repeatedly until the desired letter  
to add a space.  
to add a comma, period, question mark, etc.  
to shift between capitals and lower case  
letters.  
Press and hold  
Press to enter the + sign.  
Press the right selection key to delete characters.  
Press and hold  
Press and hold  
to enter numbers.  
to change text input method.  
to change writing language.  
Multitap input only applies when latin characters are  
selected as input language.  
T9™ Text Input  
The T9™ Text Input method uses a dictionary to recognize  
words. You press each key only once, even if the letter  
you want is not the first letter on the key.  
To enter letters using T9Text Input  
1 From standby press  
.
2 Select Text message.  
3 Press and hold  
to switch between Multitap and  
T9™ text input.  
27  
This is the Internet version of the user's guide. © Print only for private use.  
     
4 Write your message, for example, to write the word  
“Jane”, press  
,
,
,
.
5 Accept a word and add a space by pressing  
accept a word without adding a space, press  
word shown is not the one you want, press  
repeatedly to view alternative words.  
. To  
. If the  
or  
6 Continue writing your message. To enter a full stop or  
other punctuation marks, press and then or  
repeatedly. Accept a word and add a space by  
pressing  
.
Press the right selection key once to delete one  
character at a time.  
Press and hold the right selection key to delete all  
characters at once.  
Press and hold  
Press and hold  
to change text input method.  
to change writing language.  
Chinese input  
This mobile phone has different input methods for entering  
Chinese characters:  
Stroke input  
Pinyin input  
You can use these methods, for example, to enter  
Chinese names and Chinese short messages.  
Switching between Chinese input methods  
In the Chinese editing mode, you can select and switch  
quickly to another input method by pressing and holding  
.
28  
This is the Internet version of the user's guide. © Print only for private use.  
General instructions  
Regardless of which input method you choose, your  
phone has a function to speed up the entry of Chinese  
characters. Whenever you enter a stroke or a Pinyin letter,  
a candidate row of the most frequently used characters  
containing that stroke or relating to that letter appears at  
the bottom of the screen.  
If the character you want is not displayed in the candidate  
row, press  
pressing  
to present another candidate row. Continue  
until the character you want is displayed.  
Alternatively, you can enter the next stroke or Pinyin letter,  
and a new set of characters will immediately be displayed  
in the candidate row. To go back to the previous row,  
press  
. To select a character in the candidate row,  
press the navigation key or press and hold the key  
corresponding to the number above the character you  
want to enter.  
Stroke input  
A Chinese character is built up of strokes. There are more  
than 30 basic strokes, which are grouped into 5 stroke  
categories. Each category is represented on the keypad  
by one of the keys  
-
. The Wild Card key  
, is  
used when you are not sure of which stroke to use.  
Stroke categories  
The 5 stroke categories are defined in the table below:  
Numbe Stroke  
r Key  
Basic Stroke Name  
Character  
Category Stroke  
Over  
Lift  
王 十 在 七 天  
海 红 牡 状 习  
29  
This is the Internet version of the user's guide. © Print only for private use.  
 
Numbe Stroke  
Basic Stroke Name  
Character  
r Key  
Category Stroke  
Down  
中 业 上 门 丑  
小 水 打 子 承  
直 真 质 草  
Down-Hook  
Short  
Slope Down  
Long Left Slope  
Over Slope  
Short left Slope  
Dot  
八 九 丹 风 片  
香 千 匕 后 丢  
而 页 面 学 殷  
六 学 雷 心 性  
人 火 又 送 林  
四 西 酉 酸  
Right Slope  
Down-Curved-  
Over  
Down-Over  
山 巨 屯 母 凶  
么 去 公 约 能  
女 要 好 巡 巢  
衣 以 饭 收 长  
我 或 民 成 伐  
Left Slope-Over  
Left Slope-Dot  
Down-Lift  
Right Slope-  
Hook  
Down-Over-  
Hook  
心 必 思 忘  
电 也 毛 兄 孔  
专 传 转  
Down-Over-  
Curved-Hook  
Down-Over-Left  
Slope  
30  
This is the Internet version of the user's guide. © Print only for private use.  
Numbe Stroke  
r Key  
Basic Stroke Name  
Character  
马 与 张 号 费  
鼎 鼐  
Category Stroke  
Down-Over-  
Down-Hook  
Down-Over-  
Down  
Over-Hook  
Over-Down  
写 字 皮 通 免  
口 已 户 书 骨  
力 习 也 同 永  
Over-Down-  
Hook  
Over-Left Slope  
又 之 登 多 社  
及 极 廷 建  
Over-Down-  
Over-Left Slope  
Over-Left Slope-  
Curved-Hook  
阿 队 陈 那 部  
乃 透 鼐 隽 杨  
Over-Down-  
Over-Hook  
Over-Down-  
Over-Down  
Curved-Hook  
狗 豹 家 逐 狂  
乙 九 瓦 飞 风  
Over-Down-  
Curved-Hook  
Over-Down-Over  
Over-Down-Lift  
投 沿 船 凹  
话 计 认 讯  
? (Wild card key)  
31  
This is the Internet version of the user's guide. © Print only for private use.  
Components  
The basic building units of Chinese characters are  
components that are made up of strokes. After entering  
the first two strokes of the desired character, the  
component and character candidates that started with  
that stroke are displayed in the candidate row.  
Using components is a fast method for entering complex  
characters.  
The smaller yellow candidates are components, and  
the bigger black candidates are characters.  
For example, to enter “ ”  
1 Enter “ ”, “ ” and “ ”.  
2 Press Select then press the key corresponding to the  
number above the character to select ”  
3 Press Select then press the key corresponding to the  
number above the character to select “ ”.  
Example of using the wild card key  
The wild card key  
, is used to supplement unclear  
strokes in entering characters. If you want to enter “ ”,  
but you only know that “ ” is the first and the last stroke  
of the character and that the total number of strokes is  
four, enter  
,
,
,
. The character is  
displayed in the candidate row.  
32  
This is the Internet version of the user's guide. © Print only for private use.  
Pinyin input  
Press the keys containing the required Pinyin letters, and  
the phone will make various proposals on the screen,  
according to the pronunciation rules of Mandarin.  
Below is the key mapping of Pinyin letters on the keypad.  
Number Key  
Pinyin Letter  
a b c  
d e f  
g h i  
j k l  
m n o  
p q r s  
t u ü  
w x y z  
On the keypad, the letter ü is replaced by v.  
For example, to enter “ ”  
1 Press  
,
,
.
2 When “xin” is underline, press Select then press the  
key corresponding to the number above the character  
to select “ ”.(If you want to enter any of the other  
suggested Pinyin combinations, press  
or  
to the  
desired combination, then press Select).  
3 Press Select then press the key corresponding to the  
number above the character to select “ ”.  
33  
This is the Internet version of the user's guide. © Print only for private use.  
 
To view options when entering letters  
Select Options to view options when entering letters.  
Send message – to send the composed message.  
Save – to save a draft of the composed message.  
Add symbol – use  
to move through  
symbols.  
Writing lang. – a list of available languages is shown.  
Dictionary – turn T9 text input on or off.  
Add item – to add a picture, sound, animation.  
Writing method – only visible when writing language is  
Chinese. Change between different Chinese writing  
methods.  
To enter symbols in a text message  
1 When you write a text message, select Options  
} Add symbol.  
2 Scroll to a symbol and select Insert.  
To change writing language  
1 When you write a text message, select Options  
} Writing lang.  
2 Select a language.  
34  
This is the Internet version of the user's guide. © Print only for private use.  
   
Unsent  
Messages that you do not wish to send immediately can  
be saved in Unsent.  
To save a phone number from a text message  
1 When a text message is displayed select Options  
} Save sender no..  
2 Select if the contact is to be saved on the SIM card or  
in phone memory only.  
3 Enter the name and select Options } OK.  
4 Select Save contact.  
To delete a message  
When a text message is displayed select Options } Delete  
} Yes.  
To delete all messages  
1 From standby select Menu } Messaging } Text  
message } Delete msgs and select an option.  
2 Delete all messages? appears. Select Yes.  
Long messages  
The number of characters allowed in a text message  
depends on the language you are writing in. Long  
messages are sent by automatic linking of two or more  
messages. You are charged for each of the messages  
linked in a long message. You may not receive all parts of  
a long message at the same time.  
Check with your service provider for the maximum  
number of messages that can be linked.  
35  
This is the Internet version of the user's guide. © Print only for private use.  
 
Text message options  
The phone supports different types of messages. Your  
service provider may convert text message into a format  
(email, for example) that suits the equipment that is going  
to receive the message.  
To set a default message type  
From standby select Menu } Messaging } Settings  
} Text message } Text message type and select an  
option.  
To get delivery status of a sent message  
From standby select Menu } Messaging } Settings  
} Delivery report and select an option.  
When set to On the phone will notify you when a message  
has been successfully delivered.  
Area information  
Area information is a type of text message (for example,  
a local traffic report) that is sent to all subscribers within  
a certain network area.  
Please contact your service provider for more  
information about area information.  
To turn area information on or off  
From standby select Menu } Messaging } Settings  
} Text message } Area information.  
Subscriptions – add name and number for the Area  
information that the phone should subscribe to.  
Reception – set reception to On or Off.  
Language – select the language that you want the  
information to be presented in.  
36  
This is the Internet version of the user's guide. © Print only for private use.  
         
Cell info – information about what network cell the  
phone is in contact with. Shown when the phone is in  
Standby mode. Set to On or Off.  
Picture messages  
Picture messages can contain text, pictures or camera  
pictures. They are sent via MMS (Multimedia Messaging  
Signatures) to a mobile phone.  
Sending and receiving phones must have  
subscriptions that support picture messaging.  
Before you start  
If settings are not already in your phone % 45 Settings.  
To create and send a picture message  
1 From standby press  
.
2 Select Picture messages } Options and select among  
the options to build the message. When you have  
added text or an item, select Options } Save to  
continue building the message.  
3 When the message is ready, select } Options } Send.  
4 Select an option.  
If you select email, enter the email address.  
If you select phone number, enter the phone  
number, or retrieve a number that has recently  
been used, or look-up from contacts.  
37  
This is the Internet version of the user's guide. © Print only for private use.  
   
5 Select Send.  
The box in the upper right corner of the screen shows  
the kilobytes of your created picture message.  
To receive picture messages  
When your phone has received new picture messages  
1 Read now? appears. Select View.  
2 Scroll to the unread message and select Read.  
appears on the screen to remind you that you have  
unread picture messages.  
Inbox and Outbox  
Received messages are saved in Inbox. Messages that  
fail to be sent are saved in Outbox.  
Draft  
Messages that you do not wish to send immediately can  
be saved in Drafts.  
To save a draft  
When you write a message, select Options } Save.  
The message is saved in Drafts.  
To save an item in a received picture message  
1 Scroll to the item and select Options.  
2 Select Save picture or Save melody. Items are saved in  
corresponding folders in Extras } My files.  
To view options when creating a picture message  
Select Options to view options when creating a picture  
message:  
Send – to send your created picture message.  
Save – to save a draft of your created picture message.  
Add text/Delete text – to insert or delete text in  
a picture message.  
38  
This is the Internet version of the user's guide. © Print only for private use.  
 
Edit text – to edit text in a draft.  
Add picture/Delete picture – to insert or delete a picture  
in a picture message.  
Add sound/Delete sound – to insert or delete an audio  
file in a picture message.  
Add page – to extend your picture message with  
another page.  
Page timing – to view the length of the picture message  
in minutes and seconds.  
Preview – to preview your created picture message  
before sending.  
Delete page – to delete an inserted page from a picture  
message. Only available if the message includes more  
than one page.  
Next page – to scroll to the next page. Only available if  
the message includes more than one page.  
Previous page – to scroll to the previous page. Only  
available if the message includes more than one page.  
Automatic download  
Select how to download your picture messages.  
From standby select Menu } Messaging } Settings  
} Picture message to select one of the following:  
Msg download – select if the phone should ask you  
before downloading (Always ask), or if it should  
download automatically (Always downl.), if ask to  
download when not in home network (Roaming).  
Accept msgs – decide whether commercial and  
anonymous messages should be accepted.  
Message server – enter a message server or service  
centre address for MMS services.  
Internet profile – to select the WAP profile to be used  
for MMS.  
39  
This is the Internet version of the user's guide. © Print only for private use.  
Radio  
You can save up to 10 preset channels.  
Do not use your phone as a radio in places where  
this is prohibited.  
To listen to the radio  
1 Connect the headset to the phone % 5 Getting started.  
The headset works as an antenna for the radio.  
2 From standby press  
.
To change the radio volume  
When the radio is on, press  
or  
.
To search for radio channels  
When the radio is on, press and hold  
or  
.
To save a radio channel  
When you have found a radio channel, press and hold  
to save it on the corresponding position. The  
radio channel is saved in Options } Channels.  
To listen to a saved radio channel  
When the radio is on, press  
to listen to the  
radio channel on the corresponding position.  
To exit the radio  
Select Back or press  
.
40  
This is the Internet version of the user's guide. © Print only for private use.  
     
Radio options  
When the radio is on, select Options for the following  
options:  
Search – automatically find a radio channel with a  
strong signal.  
Minimize – minimize the radio on the screen to use  
other functions with the radio still playing.  
Save – save the radio channel.  
Channels – view all saved channels.  
Auto save – automatically find and save radio channels  
with a strong signal. Previously saved channels will be  
replaced.  
Set frequency – manually enter a frequency number.  
Turn on Mono/Turn on Stereo – if weak radio signal  
strength Mono can give a better reception.  
Turn on speaker/Turn off speaker – switch between  
the telephone speaker and the headset.  
RDS – Radio Data System, presenting of station name,  
automatic changing of channel.  
While listening to the radio  
If you minimize the radio on the screen, you can listen to  
the radio and use other functionality at the same time. For  
example, you can make and receive calls and send  
messages.  
To minimize the radio on the screen  
Select Options } Minimize.  
Press to restore the radio on the screen.  
To turn the radio off when minimized  
Press and select Back.  
41  
This is the Internet version of the user's guide. © Print only for private use.  
Imaging  
Camera  
Your phone has a digital camera to take pictures to save  
or send. Use a picture as a screen saver, wallpaper or add  
it to a contact.  
Pictures taken with the camera are saved in Camera  
} Camera pics. The format is JPEG.  
Pictures downloaded via Picture messages, Internet or via  
Infrared port are saved in Extras } My files } My pictures.  
To start the camera and take a picture  
1 From standby press  
.
2 Hold the phone as shown in the illustration. You can  
see the subject on the phone screen.  
3 Select Capture to take the picture.  
A strong light source such as direct sunlight or  
a lamp can make the screen black out or the picture  
may be distorted.  
42  
This is the Internet version of the user's guide. © Print only for private use.  
   
To save a picture  
When you have taken a picture, select Save. The picture is  
saved in Camera } Camera pics.  
When the memory is full, you need to delete items  
before you can save the picture.  
To delete a picture  
1 When you have taken a picture, select Delete.  
2 Delete picture? appears. Select Yes.  
To delete a picture from Camera pics  
1 From standby select Menu } Camera } Camera pics.  
2 Scroll to a picture and select View.  
3 Select Options } Delete } Yes.  
To delete a picture from My pictures  
1 From standby select Menu } Extras } My files  
} My pictures.  
2 Scroll to a picture and select View.  
3 Select Options } Delete } Yes.  
Sending pictures  
Sending and receiving phones must have  
subscriptions that support picture messaging. If  
settings are not already in your phone % 45 Settings.  
To send a picture from Camera pics  
1 From standby select Menu } Camera } Camera pics.  
2 Scroll to a picture and select View.  
3 Select Options } Send message } Options } Send.  
4 Enter phone number or email address.  
5 Select Send.  
43  
This is the Internet version of the user's guide. © Print only for private use.  
To send a picture from My pictures  
1 From standby select Menu } Extras } My files } My  
pictures.  
2 Scroll to a picture and select View.  
3 Select Options } Send message } Options } Send.  
4 Enter phone number or email address.  
5 Select Send.  
Wallpaper  
If you set a picture as wallpaper, this picture is displayed  
in standby mode.  
To use a picture taken with camera as wallpaper  
1 From standby select Menu } Camera } Camera pics.  
2 Scroll to a picture and select View.  
3 Select Options } Set wallpaper.  
Picture options  
Delete – to delete the selected picture.  
Send message – to send the picture in a picture  
message.  
Send via IR – to exchange the picture with another  
device equipped with infrared.  
Set wallpaper – to set a picture as wallpaper.  
Rename – to rename the picture. The default naming  
for a picture is YY/MM/DD/HH/MM/SS.  
Information – view file typefile size and activation  
status of the picture.  
44  
This is the Internet version of the user's guide. © Print only for private use.  
Internet  
Internet appears either in the main menu or under  
Settings  
You need the correct settings in your phone to use  
the Internet or messaging services.  
Settings may be in your phone when you buy it. If not,  
contact your network operator, service provider or go to  
www.sonyericsson.com/cn for more information. To use  
the Internet, and send and receive picture messages, you  
need the following:  
A phone subscription that supports data transmission.  
The correct settings in your phone.  
Entering settings  
If settings are not in your phone, you can:  
Receive settings in a text message (SMS) from your  
network operator.  
Use a computer to go to www.sonyericsson.com/cn to  
request that a text message with the settings is sent to  
your phone.  
To install settings  
1 When the message New settings received appears,  
select Yes to install the settings. If settings already exist  
in your phone you can either keep or replace them.  
2 Select an Internet profile.  
3 If you install settings for picture messages, select a  
message server.  
After the installation % 46 Internet menu.  
45  
This is the Internet version of the user's guide. © Print only for private use.  
   
Internet menu  
The Internet menu contains the following:  
Homepage – go to the predefined homepage.  
Bookmarks – go directly to a saved Web page.  
Go to URL – enter a Web address manually or retrieve  
one.  
Edit bookmark – edit the Web address of a saved  
bookmark.  
Show pictures – allow if images to be shown on Web  
pages.  
Push access – allow or reject reception of push  
messages.  
Push inbox – WAP Push notification messages are  
saved here.  
Clear cache – clear the internet browser cache  
memory.  
Internet profile – select the WAP profile to be used for  
Web browsing.  
To select an Internet profile  
1 From standby select Menu } Extras } Internet  
} Internet profile.  
2 Select a profile to use.  
To start browsing  
1 From standby select Menu } Extras } Internet } Go to  
URL.  
2 Enter a new Web address or select an already used  
Web address.  
To stop browsing  
When you browse, select Back until you exit the Internet.  
46  
This is the Internet version of the user's guide. © Print only for private use.  
 
Options when browsing  
When you browse, select Options. The menu contains the  
following, but depends on the Web page you are visiting:  
View – open the marked Web address.  
Bookmarks – create, use or edit bookmarks to Web  
pages.  
Go to URL – enter a Web address manually or retrieve  
one.  
Add bookmark – add a new bookmark to the list.  
Reload – refresh the current Web page.  
Homepage – go to the predefined homepage.  
Exit browser – leave the Internet browser.  
47  
This is the Internet version of the user's guide. © Print only for private use.  
Infrared port  
You can use infrared to send, for example, pictures to  
another phone or a computer.  
To turn on infrared  
From standby select Menu } Settings } Infrared port  
} On.  
If set to On but not used, the Infrared port  
automatically turns off after 10 minutes.  
To connect two devices  
<20 cm  
(<8")  
1 Turn on infrared in both devices.  
2 Make sure the infrared port on your phone is facing the  
infrared port on the other device with a maximum  
distance of 20 cm (8 inches).  
To transfer items using infrared  
1 Select an item to transfer.  
2 Select Options } Send via IR.  
48  
This is the Internet version of the user's guide. © Print only for private use.  
 
Sounds & Alerts  
Your phone comes with a number of standard and  
polyphonic melodies which can be used as ringtones.  
Do not hold the phone to your ear when using high  
ringtones as this can damage your hearing.  
To select a ringtone  
1 From standby select Menu } Settings } Sound & alerts  
} Ringtone.  
2 Select a ringtone. The sound is played when selected.  
To set the ringtone to silent  
From standby select Menu } Settings } Sound & alerts  
} Ring volume } Silent.  
To set the ring volume  
From standby select Menu } Settings } Sound & alerts  
} Ring volume and select an option.  
To select a key sound  
From standby select Menu } Settings } Sound & alerts  
} Key sound and select an option.  
To set the key sound to silent  
From standby select Menu } Settings } Sound & alerts  
} Key sound } Silent.  
Sounds and alerts options  
Under Sound & alerts you can also set these options:  
Vibration – set the vibration ring style to On or On if in  
Silent or Off.  
Message alert – select a message notification signal.  
Alarm sound – select an alarm signal.  
49  
This is the Internet version of the user's guide. © Print only for private use.  
         
Alarm clock/Alarms  
Alarm clock, or alarms, appears either in the main  
menu or under Extras % 12 To change the main  
The alarm rings even if the phone is set to silent or turned  
off. The alarm time is displayed in standby mode.  
To set an alarm  
1 From standby select Menu } Extras } Alarm clock.  
2 Enter a time for the alarm and select Save.  
3 Select an option.  
If Alarm is selected, select an alarm signal.  
If Recurrent alarm is selected, select what day/  
days the alarm is going to sound. Scroll and mark/  
unmark checkboxes, then select Done.  
To turn an alarm off when it rings  
Select Stop, or Snooze to snooze for 9 minutes. Snooze is  
automatically turned on if you do not press any key.  
To disable an alarm  
From standby select Menu } Extras } Alarm clock  
} Alarm off.  
To select an alarm signal  
Do not hold the phone to your ear when using high  
sounds as this can damage your hearing.  
1 From standby select Menu } Settings } Sound & alerts  
} Alarm sound.  
2 Select a sound. The sound is played when selected.  
50  
This is the Internet version of the user's guide. © Print only for private use.  
   
Settings  
Wallpaper  
You can change the appearance of the screen by using  
wallpapers. Your phone comes with predefined  
wallpapers. The wallpaper activates when in idle mode for  
a few seconds, to save power.  
To select a wallpaper  
1 From standby select Menu } Settings } Wallpaper and  
select an option.  
2 Preview and select.  
To select a theme  
From standby select Menu } Settings } Theme and select  
a theme.  
To adjust the screen brightness  
1 From standby select Menu } Settings } Advanced  
} Brightness.  
2 Press  
to increase the brightness and  
to  
decrease the brightness.  
3 Select Save.  
Time and date  
To set the date  
1 From standby select Menu } Settings } Time and date  
} Date } Set date.  
2 Enter the date and select Save.  
To set the date format  
From standby select Menu } Settings } Time and date  
} Date } Date format and select an option.  
51  
This is the Internet version of the user's guide. © Print only for private use.  
           
To set the time  
1 From standby select Menu } Settings } Time and date  
} Time } Set time.  
2 Enter the time and select Save.  
To set the time format  
From standby select Menu } Settings } Time and date  
} Time } Time format and select an option.  
Networks  
When you turn on the phone, it automatically selects your  
home network. If your home network is not within range,  
you may use another network, provided your network  
operator allows it. You can select the network you want to  
use, or you can add a new network to your list of preferred  
networks. Contact your network operator for details.  
% 61 Troubleshooting for more information about  
networks.  
To view available networks  
1 From standby select Menu } Settings } Select  
network.  
2 Select whether you want to do an Automatic search or  
a Manual search.  
A list of the currently available networks in the area is  
presented after a while.  
52  
This is the Internet version of the user's guide. © Print only for private use.  
       
Master reset  
You can reset all the settings in the phone to the way they  
were when you bought your phone by performing  
a master reset. All changes that you have made to settings  
are deleted.  
Resetting may take a few minutes.  
To reset the phone  
1 From standby select Menu } Settings } Advanced  
} Master reset.  
2 Select an option.  
Reset settings – resets settings only. User data as  
contacts, messages, pictures and sounds are not  
deleted.  
Reset all – deletes all settings and user data as  
contacts, messages, pictures and sounds.  
Languages  
Select the language for phone menus or the languages  
that you may use when writing. Most SIM cards  
automatically set the language used in the menu to the  
language of the country/region where you bought your  
SIM card.  
To change the phone language  
From standby select Menu } Settings } Language and  
select a language.  
To select writing language  
You can select writing language when writing a message  
53  
This is the Internet version of the user's guide. © Print only for private use.  
       
Locks  
Phone lock  
The phone lock protects the phone against unauthorized  
use if it is stolen and the SIM card is exchanged. You can  
change the phone lock code (which is 0000 by default) to  
any four-digit personal code.  
To unlock the phone  
If the phone lock is on, enter your code and select OK.  
Automatic phone lock  
If the phone lock is set to Automatic, you do not need to  
enter your phone lock code until a different SIM card is  
inserted in the phone.  
It is important that you remember your code. If you  
should forget it, you have to hand in your phone to  
your local Sony Ericsson retailer.  
To turn the phone lock code on or off  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Protection.  
2 Select an option.  
3 Enter the phone lock code and select OK.  
To edit your phone lock code  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Change code.  
2 Enter the old code and select OK.  
3 Enter the new code and select OK.  
4 Re-enter the new code to confirm and select OK.  
54  
This is the Internet version of the user's guide. © Print only for private use.  
     
Keypad lock  
Lock the keypad to avoid dialling a number by accident.  
You can still answer a call and the keypad locks again  
Automatic keylock  
Automatic keylock in standby means the keypad is locked  
a short while after you last pressed a key.  
To turn the automatic keylock on or off  
From standby select Menu } Settings } Advanced } Auto  
keylock and select an option.  
Calls to the international emergency number 112 can  
still be made, even when the keypad is locked.  
SIM card lock  
The SIM card lock protects your subscription, but not your  
phone itself, from unauthorized use. If you change SIM  
cards, the phone still works with the new SIM card.  
Most SIM cards are locked at the time of purchase. If  
the SIM card lock is on, you have to enter a PIN (Personal  
Identity Number) every time you turn on your phone.  
If you enter your PIN incorrectly three times in a row,  
the SIM card is blocked. This is indicated by the message  
PIN blocked. To unblock it, you need to enter your PUK  
(Personal Unblocking Key). Your PIN and PUK are  
supplied by your network operator. You can edit your PIN  
and turn off your SIM card lock at any time.  
If the message Passwords do not match appears  
when you edit your PIN, you entered the PIN or PIN2  
incorrectly.  
55  
This is the Internet version of the user's guide. © Print only for private use.  
             
To unblock your SIM card  
1 When PIN blocked is displayed, enter your PUK and  
select OK.  
2 Enter a new four- to eight-digit PIN and select OK.  
3 Re-enter the new PIN to confirm and select OK.  
To turn the SIM card lock on or off  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Protection and select an  
option.  
2 Enter your PIN and select OK.  
To edit your PIN  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Change PIN.  
2 Enter your PIN and select OK.  
3 Enter a new four- to eight-digit PIN and select OK.  
4 Re-enter the new PIN to confirm and select OK.  
To edit your PIN2  
1 From standby select Menu } Settings } Advanced  
} Security } SIM lock } Change PIN2.  
2 Enter your PIN2 and select OK.  
3 Enter a new four- to eight-digit PIN and select OK.  
4 Re-enter the new PIN to confirm and select OK.  
56  
This is the Internet version of the user's guide. © Print only for private use.  
     
Extras  
Alarm clock  
Internet  
Calendar  
Your phone has a calendar where you can add notes.  
Navigating in your calendar  
Use the navigation key to move between days or weeks.  
Today’s date will have a square around it. You can change  
view under Options.  
View today – view the note for the selected day. If there  
is more than one note, press  
View all – view all notes. Press  
and  
and  
to scroll.  
to scroll.  
Change date – enter a date to view another week or  
month.  
To add a new note  
1 From standby select Menu } Extras } Calendar.  
2 Scroll to the desired date and select Options  
} Add a note.  
3 Enter details and select Options } OK.  
4 Select OK to confirm the date.  
5 Select OK to confirm the time.  
6 Select if you want a reminder signal.  
On – a reminder signal will sound in immediate  
connection with the note.  
Off – no reminder signal.  
57  
This is the Internet version of the user's guide. © Print only for private use.  
 
To edit or delete a note  
1 From standby select Menu } Extras } Calendar.  
2 Scroll to the day for the note and select Options } View  
today.  
3 If there is more than one note, scroll to the desired  
note.  
4 Select Options.  
5 Select to delete or edit the note.  
To send and receive a note  
1 From standby select Menu } Extras } Calendar.  
2 Scroll to the day for the note and select Options } View  
today.  
3 Select Options } Send } Text message.  
4 Write a text message and select Options } Send  
message.  
5 Enter phone number.  
6 Select Options } Send message.  
When you receive a note, follow the instructions that  
appear.  
Calendar settings  
Under Calendar you also have these options:  
Delete – delete notes.  
Edit – edit a note.  
Add symbol – add a symbol to a note.  
Writing lang. – select language.  
Dictionary – turn T9 text input on or off.  
Continue writing – if you receive an incoming call, this  
alternative pops up.  
Don´t save – do not save changes.  
58  
This is the Internet version of the user's guide. © Print only for private use.  
Starting day – Set starting day of weeks.  
If Chinese is selected as the phone language,  
an additional option apperars, Lunar calendar.  
Timer  
Your phone has a built-in timer. When the signal rings,  
press the left selection key  
to turn it off.  
To set the timer  
1 From standby select Menu } Extras } Timer and enter  
the hours, minutes and seconds for countdown.  
2 Select OK to start.  
Stopwatch  
Your phone has a stopwatch that can save several laps.  
To use the stopwatch  
From standby select Menu } Extras } Stopwatch } Start.  
Select Start to start.  
Select Stop to stop.  
Select New lap to measure an additional lap.  
Select Options to save or reset etc.  
Select View to view saved laps.  
Select Delete to delete saved laps One at a time or  
Delete all.  
59  
This is the Internet version of the user's guide. © Print only for private use.  
 
Calculator  
The phone has a built-in calculator, which can add,  
subtract, divide and multiply.  
To use the calculator  
1 From standby select Menu } Extras } Calculator.  
2 Enter digits with the keypad, then press:  
or  
or  
to get ÷, x.  
to get +, -.  
to enter a decimal point.  
to change between positive and negative values.  
Select Clear to delete the figure.  
Select OK to get the result.  
Please note that the accuracy of the calculator is  
limited.  
My Files  
Pictures and sounds are saved in My files.  
Games  
Your phone comes with games. Information and game  
controls are given in help texts for each game.  
To start and end a game  
1 From standby select Menu } Extras } My Games.  
2 Select a game.  
3 To read help texts select Help.  
4 To start a new game select New game.  
5 Press  
to quit a game.  
60  
This is the Internet version of the user's guide. © Print only for private use.  
 
Troubleshooting  
Some problems require that you call your service provider,  
but most of the problems you can easily correct yourself.  
Remove the SIM card before handing your phone in for  
repair.  
Common questions  
Q: Why do I have problems with memory capacity  
and speed?  
A: You need to restart your phone from time to time.  
1 Turn off the phone and remove the battery cover  
2 Remove the battery for 10 seconds and then insert it in  
the phone.  
3 Put the battery cover on.  
61  
This is the Internet version of the user's guide. © Print only for private use.  
   
4 Turn on the phone.  
Q: My screen freezes or flickers, what should I do?  
A: Do a master reset  
Q: Why can’t I turn on my phone?  
A: Charge the phone until it has finished charging.  
Make sure that the phone is charged. Attach the charger  
and charge the phone for 2.5 hours. The battery icon may  
not appear until the phone has charged for 30 minutes.  
A green battery  
means the phone  
battery is fully  
charged. A white  
battery means the  
phone battery is  
empty.  
62  
This is the Internet version of the user's guide. © Print only for private use.  
Q: Why can’t I charge my phone?  
A: Attach the charger properly.  
Look carefully at the picture to see how to attach the  
charger and charge the phone.  
Q: How do I change phone language?  
A: From standby select Menu } Settings } Language  
and select a language.  
Q: What is my phone lock code?  
A: The default phone lock code is 0000.  
A phone lock protects your phone against unauthorized  
use. If a different SIM card is inserted in the phone, the  
phone lock code has to be entered.  
1 From standby select Menu } Settings } Advanced  
} Security } Phone lock } Change code.  
2 Enter the old code and select OK.  
63  
This is the Internet version of the user's guide. © Print only for private use.  
To turn the phone lock code on or off  
1 Enter the new code and select OK.  
2 Repeat the new code and select OK.  
3 Select Protection and then select On.  
4 Enter your phone lock code and select OK.  
Q: How do I turn on and off T9 text input when  
writing a text message?  
A: Press and hold  
when entering text.  
You will see “T9” at the top of the text message when T9  
is activated.  
Q: It says Searching for networks on the screen.  
A: Try calling from a different location.  
Searching for networks means that the radio receiver is  
not picking up signals from the operator. This may be a  
problem with your location. Move to a location where you  
64  
This is the Internet version of the user's guide. © Print only for private use.  
have received good network coverage earlier. You will get  
better network coverage outdoors.  
Five blue bars mean  
full network coverage  
Q: It says Emergency calls only on the screen.  
A: Try calling from a different location.  
When the screen shows Emergency calls only, your  
phone is OK, but you are having problems accessing your  
own network. Change location and see if the message  
disappears. % 52 Networks for details.  
Q: It says Insert SIM card on the screen.  
A: Remove the SIM card and clean it.  
65  
This is the Internet version of the user's guide. © Print only for private use.  
Q: The phone turns itself off.  
A: Use the automatic key lock.  
If your phone turns itself off when being transported,  
something in your pocket or bag has probably activated  
the on/off key. Turn on the automatic key lock function.  
Q: How do I set up SMS/text messages?  
A: Check the service centre number in the phone.  
If the number to your service centre is not saved on your  
SIM card, you must specify the number yourself,  
otherwise you cannot reply to received messages or send  
your own.  
Your service centre number is usually provided with your  
SIM card. If you cannot find your service centre number,  
please contact your service provider.  
1 From standby select Menu } Messaging } Settings  
} Text message } Service centre. The number is  
shown if it is saved on the SIM card.  
2 If there is no number, enter it, including the international  
“+” sign and country/region code and select Save.  
Q: I have problems using SMS/text messages on my  
phone.  
A: Enter the correct SMS/text message settings.  
If you have problems sending or receiving text messages  
on your phone, some of your phone settings are probably  
incorrect. The settings are different for different operators,  
contact your network operator for the correct SMS service  
centre setting.  
66  
This is the Internet version of the user's guide. © Print only for private use.  
Error messages  
Insert SIM card  
Your SIM card is not inserted correctly or may be  
damaged or dirty. Try one or more of the following:  
Remove the SIM card and insert it correctly. % 9 To  
Clean the connectors on the SIM card and phone with  
a soft brush, a cloth or a cotton bud moistened with any  
type of unflavoured colourless alcohol.  
Check if the SIM card is damaged.  
Contact your network operator to get a new SIM card.  
Invalid SIM  
This error message is shown in two cases:  
The phone only works with certain SIM cards. Insert the  
correct SIM card.  
You entered your personal unblocking key code (PUK)  
incorrectly 10 times in a row. Contact your operator. To  
Emergency calls only  
You are having problems accessing your own network.  
You can only make emergency calls from this location  
Searching for networks  
Your phone is not receiving a signal from a network  
operator. Try moving to a location where you have  
received good network coverage earlier.  
67  
This is the Internet version of the user's guide. © Print only for private use.  
   
Passwords do not match  
You have entered your PIN or PIN2 incorrectly.  
Enter the correct PIN or PIN2 and select Yes % 54 Locks.  
PIN blocked or PIN2 blocked. Enter PUK2 provided by  
your operator.  
You have entered your PIN or PIN2 incorrectly three times  
in a row. To unblock your codes % 54 Locks.  
Phone locked  
The phone is locked. To unlock the phone % 54 Locks.  
Phone lock code:  
Your phone comes with the phone lock code 0000. You  
can change it to any four-digit code % 54 Locks.  
68  
This is the Internet version of the user's guide. © Print only for private use.  
 
Important information  
Sony Ericsson Consumer Web site  
On www.sonyericsson.com/cn there is a support section where help and  
tips are only a few clicks away. Here you will find the latest computer  
software updates and tips on how to use your product more efficiently.  
Guidelines for Safe and Efficient  
Use  
Please read this information before using your mobile  
phone.  
These instructions are intended for your safety. Please  
follow these guidelines. If the product has been subject to  
any of the conditions listed below or you have any doubt as  
to its proper function make sure you have the product  
checked by a certified service partner before charging or using it. Failure  
to do so might entail a risk of product malfunction or even a potential  
hazard to your health.  
Recommendations for safe use of product (mobile  
phone, battery, charger and other accessories)  
Always treat your product with care and keep it in a clean and dust-  
free place.  
Warning! May explode if disposed of in fire.  
Do not expose your product to liquid or moisture or humidity.  
Do not expose your product to extremely high or low  
temperatures. Do not expose the battery to temperatures  
above +60°C (+140°F).  
Do not expose your product to open flames or lit  
tobacco products.  
Do not drop, throw or try to bend your product.  
Do not paint your product.  
Do not attempt to disassemble or modify your product.  
Only Sony Ericsson authorized personnel should  
perform service.  
Do not use your product near medical equipment  
without requesting permission from your treating physician or  
authorized medical staff.  
69  
This is the Internet version of the user's guide. © Print only for private use.  
     
Do not use your product when in, or around aircraft, or areas showing  
the sign “turn off two-way radio”.  
Do not use your product in an area where a potentially explosive  
atmosphere exists.  
Do not place your product or install wireless equipment  
in the area above an air bag in your car.  
CHILDREN  
KEEP OUT OF CHILDRENS REACH. DO NOT ALLOW  
CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS  
ACCESSORIES. THEY COULD HURT THEMSELVES OR  
OTHERS, OR COULD ACCIDENTALLY DAMAGE THE  
MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE  
OR ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT  
COULD BECOME DETACHED AND CREATE A CHOKING HAZARD.  
Power supply (Charger)  
Connect the AC power adapter only to designated power sources as  
marked on the product. Make sure the cord is positioned so that it will not  
be subjected to damage or stress. To reduce risk of electric shock, unplug  
the unit from any power source before attempting to clean it. The AC  
power adapter must not be used outdoors or in damp areas. Never alter  
the cord or plug. If the plug does not fit into the outlet, have a proper outlet  
installed by a qualified electrician.  
Use only Sony Ericsson branded original chargers intended for use with  
your mobile phone. Other chargers may not be designed to the same  
safety and performance standards.  
Battery  
We recommend that you fully charge the battery before you use your  
mobile phone for the first time. A new battery or one that has not been  
used for a long time could have reduced capacity the first few times it is  
used. The battery should only be charged in temperatures between +5°C  
(+41°F) and +45°C (+113°F).  
Use only Sony Ericsson branded original batteries intended for use with  
your mobile phone. Using other batteries and chargers could be  
dangerous.  
70  
This is the Internet version of the user's guide. © Print only for private use.  
 
Talk and standby times depend on several different conditions such as  
signal strength, operating temperature, application usage patterns,  
features selected and voice or data transmissions when the mobile phone  
is being used. Under normal conditions, the stand-by time for this battery  
is up to 300 hours.  
Turn off your mobile phone before removing the battery. Do not put the  
battery into your mouth. Battery electrolytes may be toxic if swallowed. Do  
not let the metal contacts on the battery touch another metal object.  
Doing this could short-circuit and damage the battery. Use the battery for  
the intended purpose only.  
Personal medical devices  
Mobile phones may affect the operation of pacemakers and other  
implanted equipment. Please avoid placing the mobile phone over the  
pacemaker, e.g. in your breast pocket. When using the mobile phone, use  
it at the ear on the opposite side of the body to the pacemaker. If a  
minimum distance of 15 cm (6 inches) is kept between the mobile phone  
and the pacemaker, the risk of interference is limited. If you have any  
reason to suspect that interference is taking place, immediately turn off  
your mobile phone. Contact your cardiologist for more information.  
For other medical devices, please consult your physician and the  
manufacturer of the device.  
Driving  
Please check if local laws and regulations restrict the use of mobile  
phones while driving or require drivers to use handsfree solutions. We  
recommend that you use only Sony Ericsson handsfree solutions intended  
for use with your product.  
Please note that because of possible interference to electronic equipment,  
some vehicle manufacturers forbid the use of mobile phones in their  
vehicles unless a handsfree kit with an external antenna has been  
installed.  
Always pay full attention to driving and pull off the road and park before  
making or answering a call if driving conditions so require.  
71  
This is the Internet version of the user's guide. © Print only for private use.  
Emergency calls  
Mobile phones operate using radio signals, which cannot guarantee  
connection in all conditions. You should therefore never rely solely upon  
any mobile phone for essential communications (e.g. medical  
emergencies).  
Emergency calls may not be possible in all areas, on all cellular networks,  
or when certain network services and/or mobile phone features are in use.  
Check with your local service provider.  
Antenna  
This phone contains a built-in antenna. Use of antenna devices not  
marketed by Sony Ericsson specifically for this model could damage your  
mobile phone, reduce performance, and produce SAR levels above the  
established limits (see below).  
Efficient use  
Hold your mobile phone as you would any other phone. Do not cover the  
top of the phone when it is in use, as this affects call quality and may  
cause the phone to operate at a higher power level than needed, thus  
shortening talk and standby times.  
Radio frequency (RF) exposure and Specific  
Absorption Rate (SAR)  
Your mobile phone is a low-power radio transmitter and receiver. When it  
is turned on, it emits low levels of radio frequency energy (also known as  
radio waves or radio frequency fields).  
Governments around the world have adopted comprehensive international  
safety guidelines, developed by scientific organizations, e.g. ICNIRP  
(International Commission on Non-Ionizing Radiation Protection) and IEEE  
(The Institute of Electrical and Electronics Engineers Inc.), through periodic  
and thorough evaluation of scientific studies. These guidelines establish  
permitted levels of radio wave exposure for the general population. The  
levels include a safety margin designed to assure the safety of all persons,  
regardless of age and health, and to account for any variations in  
measurements.  
72  
This is the Internet version of the user's guide. © Print only for private use.  
Specific Absorption Rate (SAR) is the unit of measurement for the amount  
of radio frequency energy absorbed by the body when using a mobile  
phone. The SAR value is determined at the highest certified power level in  
laboratory conditions, but the actual SAR level of the mobile phone while it  
is operating can be well below this value. This is because the mobile  
phone is designed to use the minimum power required to reach the  
network.  
Variations in SAR below the radio frequency exposure guidelines do not  
mean that there are variations in safety. While there may be differences in  
SAR levels among mobile phones, all Sony Ericsson mobile phone models  
are designed to meet radio frequency exposure guidelines.  
For phones sold in the US, before a phone model is available for sale to  
the public, it must be tested and certified by the Federal Communications  
Commission (FCC) that it does not exceed the limit established by the  
government-adopted requirement for safe exposure. The tests are  
performed in positions and locations (that is, at the ear and worn on the  
body) as required by the FCC for each model. For body-worn operation,  
this phone has been tested and meets FCC RF exposure guidelines when  
the handset is positioned a minimum of 15 mm from the body without any  
metal parts in the vicinity of the phone or when used with the original Sony  
Ericsson accessory intended for this phone and worn on the body. Use of  
other accessories may not ensure compliance with FCC RF exposure  
guidelines.  
A separate leaflet with SAR information about this mobile phone model is  
included with the material accompanying this mobile phone. This  
information can also be found, together with more information on radio  
frequency exposure and SAR, on: www.sonyericsson.com/health.  
Accessible Solutions/Special Needs  
For phones sold in the US, you can use your TTY terminal with your Sony  
Ericsson mobile phone (with the necessary accessory). For information on  
Accessible Solutions for individuals with special needs call the Sony  
Ericsson Special Needs Center on 877 878 1996 (TTY) or 877 207 2056  
(voice), or visit the Sony Ericsson Special Needs Center at  
73  
This is the Internet version of the user's guide. © Print only for private use.  
Disposal of old electrical and electronic  
equipment  
This symbol indicates that all electrical and electronic  
equipment included shall not be treated as household  
waste. Instead it shall be left at the appropriate collection  
point for recycling of electrical and electronic equipment.  
By ensuring this product is disposed of correctly, you will help prevent  
potential negative consequences for the environment and human health,  
which could otherwise be caused by inappropriate waste handling of this  
product. The recycling of materials will help to conserve natural resources.  
For more detailed information about recycling this product, please contact  
your local city office, your household waste disposal service or the shop  
where you purchased the product.  
Disposing of the battery  
Please check local regulations for disposal of batteries or  
call your local Sony Ericsson Call Center for information.  
The battery should never be placed in municipal waste. Use  
a battery disposal facility if available.  
74  
This is the Internet version of the user's guide. © Print only for private use.  
Declaration of substances  
When this product is operated under the conditions in the product  
manual, the environmental protection period (EPUP) is 20 years.  
(Note: The environmental protection period (EPUP) of battery is  
5
5 years.  
)
Toxic or hazardous substances  
Polybromi  
nated  
Polybromi  
Merc Cadmi Hexavalent  
nated  
Part Name  
Lead  
(Pb)  
ury  
um  
chromium  
(Cr6+)  
diphenyl  
ethers  
biphenyls  
(PBB)  
(Hg)  
(Cd)  
(PBDE)  
Phone  
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Battery  
Accessories  
and charger  
O: Indicates that this toxic or hazardous substance contained in all  
of the homogeneous materials for this part is below the limit  
requirement in SJ/T 11363-2006.  
X: Indicates that this toxic or hazardous substance contained in at  
least one of the homogeneous materials used for this part is above  
the limit requirement in SJ/T 11363-2006.( Currently there are no  
alternative technologies available).  
Protection of personal information  
To safeguard your privacy and prevent information being accessible to a  
third party, you should erase all personal data before selling or disposing  
of the product. To delete personal data, perform a master reset.  
DELETION OF MATERIAL FROM THE PHONE MEMORY DOES NOT  
ENSURE THAT SAID INFORMATION CANNOT BE RECOVERED BY A  
SUBSEQUENT USER. SONY ERICSSON DOES NOT WARRANT  
AGAINST A SUBSEQUENT USER OF THE DEVICE ACCESSING YOUR  
INFORMATION AND DOES NOT ASSUME ANY RESPONSIBILITY FOR  
SUBSEQUENT DISCLOSURE OF SAID INFORMATION EVEN IF A  
MASTER RESET HAS BEEN PERFORMED. If you are concerned about  
such potential disclosure retain your device or secure its permanent  
destruction.  
75  
This is the Internet version of the user's guide. © Print only for private use.  
Accessories  
Sony Ericsson recommends use of Sony Ericsson original accessories for  
safe and efficient use of its products. Use of third-party accessories may  
decrease performance or pose a risk to your health or safety.  
LOUDNESS WARNING:  
Please adjust the audio volume cautiously when using third-party audio  
accessories to avoid volume levels that may be harmful to your hearing.  
Sony Ericsson does not test use of third-party audio accessories with this  
mobile phone. Sony Ericsson recommends using only Sony Ericsson  
original audio accessories.  
End User Licence Agreement  
This wireless device, including without limitation any media delivered with  
the device, (“Device”) contains software owned by Sony Ericsson Mobile  
Communications AB and its affiliated companies (“Sony Ericsson”) and its  
third party suppliers and licensors (“Software”).  
As user of this Device, Sony Ericsson grants you a non-exclusive, non-  
transferable, non-assignable license to use the Software solely in conjunction  
with the Device on which it is installed and/or delivered with. Nothing herein  
shall be construed as a sale of the Software to a user of this Device.  
You shall not reproduce, modify, distribute, reverse engineer, decompile,  
otherwise alter or use any other means to discover the source code of the  
Software or any component of the Software. For avoidance of doubt, you  
are at all times entitled to transfer all rights and obligations to the Software  
to a third party, solely together with the Device with which you received  
the Software, provided always that such third party agrees in writing to be  
bound by these rules.  
You are granted this license for a term of the useful life of this Device. You  
can terminate this license by transferring all your rights to the Device on  
which you have received the Software to a third party in writing. If you fail  
to comply with any of the terms and conditions set out in this license, it  
will terminate with immediate effect.  
Sony Ericsson and its third party suppliers and licensors are the sole and  
exclusive owner of and retain all rights, title and interest in and to the  
Software. Sony Ericsson, and, to the extent that the Software contains  
material or code of a third party, such third party, shall be entitled third  
party beneficiaries of these terms.  
The validity, construction and performance of this license shall be  
governed by the laws of Sweden. The foregoing shall apply to the full  
extent permitted by, when applicable, statutory consumer rights.  
76  
This is the Internet version of the user's guide. © Print only for private use.  
 
Limited Warranty  
Sony Ericsson Mobile Communications AB, SE-221 88 Lund, Sweden,  
(Sony Ericsson) or its local affiliated company, provides this Limited  
Warranty for your mobile phone and original accessory delivered with your  
mobile phone (hereinafter referred to as “Product”).  
Should your Product need warranty service, please return it to the dealer  
from whom it was purchased, or contact your local Sony Ericsson Call  
Center (national rates may apply) or visit www.sonyericsson.com/cn for  
further information.  
What we will do  
If, during the warranty period, this Product fails to operate under normal  
use and service, due to defects in design, materials or workmanship, Sony  
Ericsson authorized distributors or service partners, in the country/region*  
where you purchased the Product, will, at their option, either repair or  
replace the Product in accordance with the terms and conditions  
stipulated herein.  
Sony Ericsson and its service partners reserve the right to charge a  
handling fee if a returned Product is found not to be under warranty  
according to the conditions below.  
Please note that some of your personal settings, downloads and other  
information may be lost when your Sony Ericsson Product is repaired or  
replaced. At present Sony Ericsson may be prevented by applicable law,  
other regulation or technical restrictions from making a backup copy of  
certain downloads. Sony Ericsson does not take any responsibility for any  
lost information of any kind and will not reimburse you for any such loss.  
You should always make backup copies of all the information stored on  
your Sony Ericsson Product such as downloads, calendar and contacts  
before handing in your Sony Ericsson Product for repair or replacement.  
Conditions  
1
This Limited Warranty is valid only if the original proof of purchase for  
this Product issued by a Sony Ericsson authorized dealer specifying  
the date of purchase and serial number**, is presented with the  
Product to be repaired or replaced. Sony Ericsson reserves the right to  
refuse warranty service if this information has been removed or  
changed after the original purchase of the Product from the dealer.  
77  
This is the Internet version of the user's guide. © Print only for private use.  
 
2
3
If Sony Ericsson repairs or replaces the Product, the repair for the  
defect concerned, or the replaced Product shall be warranted for the  
remaining time of the original warranty period or for thirty (30) days  
from the date of repair, whichever is longer. Repair or replacement  
may involve the use of functionally equivalent reconditioned units.  
Replaced parts or components will become the property of Sony  
Ericsson.  
This warranty does not cover any failure of the Product due to normal  
tear and wear, or due to misuse, including but not limited to use in  
other than the normal and customary manner, in accordance with the  
Sony Ericsson instructions for use and maintenance of the Product.  
Nor does this warranty cover any failure of the Product due to  
accident, software or hardware modification or adjustment, acts of  
God or damage resulting from liquid.  
A rechargeable battery can be charged and discharged more than a  
hundred times. However, it will eventually wear out - this is not a defect  
and corresponds to normal wear and tear. When the talk-time or  
standby time is noticeably shorter, it is time to replace your battery.  
Sony Ericsson recommends that you use only batteries and chargers  
approved by Sony Ericsson.  
Minor variations in display brightness and colour may occur between  
the phones. There may be tiny bright or dark dots on the display.  
These are called defective pixels and occur when individual dots have  
malfunctioned and can not be adjusted. Two defective pixels are  
deemed acceptable.  
Minor variations in camera image appearance may occur between  
phones. This is nothing uncommon and is not regarded as a defective  
camera module.  
4
Since the cellular system on which the Product is to operate is  
provided by a carrier independent from Sony Ericsson, Sony Ericsson  
will not be responsible for the operation, availability, coverage,  
services or range of that system.  
5
6
This warranty does not cover Product failures caused by installations,  
modifications, or repair or opening of the Product performed by a non-  
Sony Ericsson authorised person.  
The warranty does not cover Product failures which have been caused  
by use of accessories or other peripheral devices which are not Sony  
Ericsson branded original accessories intended for use with the  
Product.  
78  
This is the Internet version of the user's guide. © Print only for private use.  
Sony Ericsson disclaims any and all warranties, whether express or  
implied, for failures caused to the Product or peripheral devices as a  
result of viruses, trojans horses, spyware, or other malicious software.  
Sony Ericsson strongly recommends that you install appropriate virus  
protection software on your Product and any peripheral devices  
connected to it, as available, and update it regularly, to better protect  
your device. It is understood, however, that such software will never  
fully protect your Product or its peripheral devices and Sony Ericsson  
disclaims all warranties, whether express or implied, in case of failure  
by such antivirus software to fulfill its intended purpose.  
7
8
Tampering with any of the seals on the Product will void the warranty.  
THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR  
ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL  
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS  
LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT  
LIMITED TO LOST PROFITS OR COMMERCIAL LOSS; TO THE FULL  
EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.  
Some countries/regions/states do not allow the exclusion or limitation of  
incidental or consequential damages, or limitation of the duration of  
implied warranties, so the preceding limitations or exclusions may not  
apply to you.  
The warranty provided does not affect the consumer's statutory rights  
under applicable legislation in force, nor the consumer's rights against the  
dealer arising from their sales / purchase contract.  
**In some countries/regions additional information (such as a valid  
warranty card) may be requested.  
FCC Statement  
This device complies with Part 15 of the FCC rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired operation.  
79  
This is the Internet version of the user's guide. © Print only for private use.  
Declaration of Conformity  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAA-1002052-BV  
and in combination with our accessories, to which this declaration relates  
is in conformity with the appropriate standards 3GPP TS 51.010-1, EN  
301489-7, EN 60950, following the provisions of Radio Equipment and  
Telecommunication Terminal Equipment directive 99/5/EC with  
requirements covering EMC directive 89/336/EEC, and Low Voltage  
directive 73/23/EEC.  
Lund, January 2007  
Shoji Nemoto, Head of Product Business Group GSM/UMTS  
We fulfil the requirements of the R&TTE Directive (99/5/EC).  
80  
This is the Internet version of the user's guide. © Print only for private use.  
 

Technicolor Thomson TM9255 User Manual
Teac E24E User Manual
Sony VOICE PLUS ICF CD873 User Manual
Sony MZ R900PC User Manual
Sony Ericsson W700 User Manual
Sony CFD E77L User Manual
Sonic Alert Clock Radio DM10 User Manual
Seagate Constellation ST500NM0021 User Manual
Samsung SGH T400 User Manual
Philips SPD2410BD User Manual