Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.my-siemens.com
Table of Contents
1
Con-
Phone overview ......................... 5
Insert SIM card/battery ........... 10
Without SIM card ................... 13
Standby mode ....................... 13
Groups ...................................35
he
s
e
General Instructions ................ 14
User guide ............................. 14
Menu Control ......................... 14
Codes .................................... 17
Preventing accidental
Camera (Accessories) ...............39
My phone ................................. 19
Dialling with number keys ...... 20
Swapping between 2 calls ...... 23
Conference ............................ 24
Direct call ............................... 25
T9 settings .............................56
CB services ................................57
See also Index at the end of this User Guide
2
Table of Contents
Con-
Security ................................. 74
Ring tones ................................ 78
Care and
SAR - International (ICNIRP) ...105
he
s
e
Alarm clock ............................ 80
Calculator .............................. 81
Stopwatch ............................. 81
See also Index at the end of this User Guide
Safety precautions
3
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restric-
tions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
The ringtone (p. 78), info tones
(p. 79) and handsfree talking
are reproduced through the
loudspeaker. Do not hold the
phone to your ear when it rings
or when you have switched on
the handsfree function (p. 22).
Otherwise you risk serious per-
manent damage to your hear-
ing.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
Only use original Siemens bat-
teries (100 % mercury-free) and
– charging devices. Otherwise
you risk serious damage to
health and property. The battery
could explode, for instance.
The SIM card and
You may only open the phone to
replace the battery (100 % mer-
cury-free), SIM card or
MultiMediaCard. You must not
open the battery under any
circumstances. All other
changes to this device are
strictly prohibited and will invali-
date the operating licence.
MultiMediaCard may be
removed. Caution! Small parts
like this could be swallowed by
young children.
The mains voltage specified on
the power supply unit (Volt)
must not be exceeded. Other-
wise the charging device may
be destroyed.
4
Safety precautions
Important:
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Use only Siemens original
accessories. This will avoid
potential risks to health or prop-
erty and ensure compliance with
all relevant regulations.
Improper use will invalidate the guarantee!
Phone overview
5
Phone overview
A
1
Call key
Dial phone number /name displayed, take
calls. Show last phone numbers dialled in
standby mode.
B
2
On/Off/End key
• Switched off: Hold down to switch on.
• During a call or in use: press briefly to fin-
ish.
• In menus: Press briefly: one level back.
Press and hold: return to standby mode.
• In standby mode: Hold down, to switch off
phone.
_
ª
g
Service provider
01.10.2003 10:10
NewMMS Menu
3 Control key
In lists and menus:
G
D
C
Scroll up and down.
Function call.
Back a menu level.
During a call:
Open call menu.
D
In standby mode:
Open Phonebook.
F
D
C
Open menu.
GPRS info
.
6
Phone overview
1 Integrated antenna
Do not interfere unnecessarily with the
phone above the battery cover. This
reduces reception quality.
2 Loudspeaker
_
ª
g
3 Display symbols
Service provider
01.10.2003 10:10
NewMMS Menu
Signal strength/ GPRS available/ battery
level.
4 Soft keys
The current functions of these keys are
shown in the bottom line of the display as
§text§ / symbol (e.g. d).
5Input keys
Numbers, letters.
*
6
Press and hold
• In standby mode: switch on/off all signal
tones (except alarm).
• For incoming calls: only switch off ring
tones.
7ꢀPress and hold
In standby mode: Switch key lock on/off-.
8 Microphone
9 Plug socket
Connection for charger, headset etc.
Display symbols (selection)
7
Display symbols (selection)
Display symbols
Phone numbers/names:
On the SIM card
_
Signal strength.
¢
¡
h
d
Charging.
On the SIM card (PIN 2
protected).
Battery charging status, e.g.,
50 %.
In the phone memory.
No network access.
Function activated/deactivated.
Phonebook.
v
²
Phonebook
Call records
Surf & Fun
Ring tones
Messages
è
Z
p,o
É
N
ç
]
ꢁ
y
ABC/
Indicates whether upper- or lower
Abc/abc case letters are active.
™
Text input with T9.
Camera
«
Activated and available.
Extras
ª
Registered.
Eigenes
Ñ
m
n
ꢂ
Temporarily interrupted.
Setup
© GPRS download.
All calls are diverted.
Ringer off.
Ê
WAP Online.
j
Ë
WAP via GPRS online.
Short ringer (beep) only.
k
l
Ì
ꢃ
WAP No network.
Headset active.
Ringer only, if the caller is stored
in the Phonebook.
Ø
Ö
Alarm set.
±
Auto answer feature on.
Alarm clock active.
Depending on the service provider, some of
the symbols displayed here may differ from
those in the phone.
µ
Key lock active.
8
Display symbols (selection)
Soft keys
…
Message received.
MMS received.
ꢄ
ꢅ
\
MMS notification.
Voice mail
received.
Data received.
ꢆ
—
–
Picture received.
Melody received.
Unanswered call.
Store in Phonebook.
Retrieve from Phonebook.
ꢇ
ꢈ
·
Getting started
9
Getting started
The front and back covers of the casing, as well as the keypad can be
changed in a matter of seconds – no tools required (CLIPit™, p. 94). Please
switch the phone off first:
Assembling
1
2
3
Dismantling
4
5
6
Additional notes
Your phone's display is delivered with a protective film. Remove this film before getting
started.
To avoid damage to the display, the phone should not be used without the top shell.
10
Getting started
• Insert the battery sideways into
the phone 3, then press down-
wards 4 until it engages.
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the
important data for your subscription
is stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
4
• Remove the cover in the direction
of the arrow 1.
5
3
• To remove, press the retaining tab
5 then lift the battery out.
1
• Slide cover over the phone 6
until it latches into place.
• Insert the SIM card in the opening
with the contact area facing
6
downwards and push gently until it
engages below the holder (make
sure the angled corner is in the
correct position 2).
Additional notes
Always switch off phone before removing
the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older card.
2
Functions without SIM card ...............p. 13
Getting started
Charge icon not visible
11
Charge battery
If the battery was fully discharged,
the chargin symbol will not be
immediately visible on connection to
the power supply unit. It will appear
after up to two hours. In this case the
battery is fully charged after 3-4
hours.
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains
power socket and charge for at least
two hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only
after uninterrupted charging/dis-
charging. You should therefore not
remove the battery unnecessarily and
where possible not finish the loading
process prematurely.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to +40 °C. If the tempera-
ture rises/falls 5 °C above/below this,
the charge symbol flashes a warn-
ing. The voltage specified on the
power supply unit must not be
exceeded.
Additional notes
The power supply unit will become heat up
after extended use. This is normal and not
dangerous.
12
Switch on/off/PIN
Switch on/off/PIN
Activate/deactivate
Switching on your phone
for the first time
Hold down On/Off/End key
B
to switch on or off.
Time/Date
The clock must be set to the right
time once at start-up.
Enter PIN
The SIM card can be protected with a
4- to 8-digit PIN.
§Yes§
Press.
Enter the PIN using the
J
First enter the date
(day/month/year), then
the time (24 hours,
including seconds).
J
number keys. The charac-
ters
appear to
****
ensure nobody can read
your PIN on the display.
Correct errors with §Clear§.
§OK§
Press. The time and date
are updated.
Time zones
Please enter your
Specify your current time zone.
PIN:
* * * *
Select the desired time
F
zone from the list ...
§Set§
... Apply it.
§OK§
Confirm entry with right
soft key. Logging on to
the network will take a
few seconds.
Additional notes
If the battery is removed for longer than
30 seconds, the clock must be reset.
Additional clock settings ...................p. 71.
Additional notes
Change PIN.......................................p. 17
Clear SIM card barring ......................p. 18
Switch on/off/PIN
13
Signal strength
Standby mode
_
Strong receive signal.
_
g
^
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
Service provider
01.10.2003
10:10
NewMMS
Menu
Without SIM card
If you switch on the phone without a
SIM card you can still use some
phone functions.
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready for
use.
§Menu§
Press soft key. The func-
tions are displayed.
The left soft key may have different
functions pre-assigned.
§SOS§
Emergency, SOS
Hold down the On/Off/End
B
key to return to standby
Emergency number
(SOS)
mode from any situation.
Additional notes
Only to be used in real emergencies!
SIM services (optional)..............p. 80
}
By pressing the soft key §SOS§ you can
make an emergency call on any net-
work without a SIM card and without
entering a PIN (not available in all
countries).
14
General Instructions
This corresponds to:
General Instructions
1
_
g
User guide
The following symbols are used to
explain operation:
Service provider
01.10.2003
NewMMS
10:10
Menu
Enter numbers or letters.
J
On/Off/End key.
B
Call key.
A
§Menu§
Open menu.
Press the control key on the
side indicated.
D
From standby mode: press the
right soft key.
<>
Soft keys
Messages
É5
Displays a soft-key function.
§Menu§
è
Z
ç
ꢁ
]
Function depends on the
service provider, special reg-
istration may be necessary.
L
Ñ m
y
NewMMS
Select
Menu Control
The steps needed to reach a function
are shown in a condensed form in this
user guide, e. g. to display call list for
missed calls:
E
Select Records Z.
Press top of control key.
§Menu§
Calls missed
¢ Z ¢
General Instructions
15
Records
É2
Calls missed
Z
5
3
è
Z
Z
ç ] ꢁ
Carol
Ñ m
y
NewMMS
Select
View
Options
Scroll to entry required.
§Select§
Press.
F
Press control key at the
bottom to scroll down.
Press right soft key to open the
Records submenu.
6
Calls missed
Z
4
Records
2-1
Z
›
Carol
Calls missed
View
Options
Select
§View§
Press.
§Select§
Press.
Press left soft key to show
phone number with date, time
and number of calls.
Press right soft key to open the
Calls missed list.
N View
Carol
7
+55524765476
01.10.2003 10:10
§5§
OK Options
Security
Security
Codes
Select function
17
§Menu§
m
¢
¢
¢
¢
Security
Codes
The phone and SIM card are pro-
tected against misuse by several
security codes.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivating the control.
Keep these confidential numbers in a
safe place where you can access them
again if required.
§Select§
Press.
PIN
Protects your SIM card
(personal identification
number).
J
Enter PIN.
Confirm input.
§OK§
PIN2
This is needed to set the charge
detail display and to access
additional functions on special
SIM cards.
§Change§ Press.
§OK§
Confirm.
PUK
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
Change PIN
You can change the PIN to any
4-8 digit number you may find
easier to remember.
PUK2
Phone
code
Protects your phone. Must be
entered at the first security set-
ting.
J
§OK§
J
Enter current PIN.
Press.
§OK§ Enter new PIN.
§OK§ Re-enter new PIN.
,
J
,
18
Security
§Menu§
m
Security
Codes
Select function
¢
¢
¢
¢
Preventing accidental
Even if PIN entry is deactivated
(p. 17) confirmation is required to
switch on phone.
Change PIN2
(Display only if PIN 2 is available).
Proceed as with Change PIN.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
Change phonecode
its) when you call up a phone-code
protected function for the first time
(e.g. direct call p. 25). It is then valid
for all phone-code protected func-
tions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. In such an instance contact
Siemens Service (p. 89).
Hold down.
B
Please confirm switch on
OK
Cancel
§OK§
Press. The phone switches
on.
Clear SIM card barring
§Cancel§
Press or take no action.
The phone does not
switch on.
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
Additional notes
Screensaver......................................p. 67
Key lock...............................................p. 6
Further security settings....................p. 74
My phone
19
Where do I get what?
Additional ringtones, logos, animati-
ons and screensavers can be ordered
on the Internet at
My phone
Change your phone to match your
personal requirements.
Ring tones
and can be sent to you via SMS/MMS
or you can download them via WAP:
Assign individual ring tones to caller
groups or for special dates (p. 78).
wap.my-siemens.com
Own greeting
Select a customised greeting (p. 66).
Siemens City Portal
You can find additional services for
your mobile phone at:
Screensaver
Choose a digital clock or a personal
picture (p. 67).
The Siemens City Portal also offers a
list of countries in which these serv-
ices are available.
(Provider) Logo
Choose an individual picture (to be
displayed in standby mode) (p. 66).
Wallpaper image
Choose your own permanent
wallpaper image (p. 66).
Colour scheme
Choose a colour scheme for the
entire service system (p. 66).
20
Making a phone call
Redial previous numbers
Making a phone call
To redial the phone number last
called:
Dialling with number
keys
The phone must be switched on
(standby mode).
Press the Call key twice.
A
To redial other numbers that were
dialled previously:
Dial number (always with
J
Press the Call key once.
A
area code, if necessary
with international dialling
code).
Pick out the required
phone number from the
list, then press ...
G
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press ...
Send control code
(DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists.
These entries are transmitted
directly as DTMF codes (control
codes).
Press the Call key. The
phone number displayed
is dialled.
A
End call
Press the End key briefly.
B
The call is ended. Press
this key even if the person
on the other end of the
line has hung up first.
y menu§ Open the call menu.
Send DTMF
Select.
Set volume
Use the control key (top)
to start adjusting the vol-
ume during conversation.
E
G
Set volume and confirm
with §OK§.
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Making a phone call
21
Additional notes
ꢈ Save number in Phonebook
If the called number is busy or can-
save ..................................................p. 31
not be reached because of network
problems several options are avail-
able (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
§Options§ call lists ............................p. 37
§Hold§.................................................p. 23
y menu§ Call menu.........................p. 25
§Handsfr.§ Handsfree .......................p. 22
Microphone off ..................................p. 25
Key lock...............................................p. 6
Either
Auto. Redial previous numbers
§Auto dial§ Press. The phone number
is automatically dialled
Transmit phone number on/off
(Hide ID)............................................p. 68
International dialling codes
ten times at increasing
time intervals. End with:
Hold down until a "+"-is
0
displayed.
BEnd key.
§+List§
Press and select country.
Or
Phone number memo
Call back
b
You can use the keypad to enter a phone
number during a conversation. The person
to whom you are speaking can hear these
entries. When the connection has ended
you can save or dial the phone number.
§Call back§ Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15 minutes.
22
Making a phone call
Accept call
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
Reject call
§Reject§
Press. The call will be
diverted if this has been
set previously (p. 69).
Or
B
Press briefly.
i
Additional notes
+5552764556
ꢇMissed calls.................................p. 37
Accept call using any key ..................p. 68
Switch off ringer...................................p. 6
Answer
Reject
§Answer§ Press.
Or
Handsfree
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
A
Press.
If the phone number has been trans-
mitted by the network, it is dis-
played. If the caller's name also
appear instead of the number. If set,
a picture can be displayed instead of
the bell icon (p. 33).
_
g
v
v
Carol
Handsfr.
ꢉmenu
Note
Please make sure you have accepted the
call before holding the phone to your ear.
This will prevent a loud ring tone from
damaging your hearing!
§Handsfr.§ Activate handsfree func-
tion.
§Yes§
Switch on.
Making a phone call
23
Swapping between
2 calls
_
g
b
Establish a second connection
You can call another number during
a call.
Handsfr.
ꢉmenu
y menu§ Open the call menu
Use the control key to
adjust the volume.
G
Hold
The current call is put on
hold.
§Handsfr.§ Switch off.
_
g
Warning!
Always switch off "handsfree talking"
before holding the phone to your ear! This
will avoid damage to your hearing.
Call held
Back
y menu§ Call menu ..........................p. 25
Now dial the new phone number
(Phonebook F).
When the new connection is estab-
lished:
y menu§ Open the call menu
Swap
Swap back and forth
between both calls.
•
End current call
End the current call and
confirm with §Yes§. You are
now connected to the
caller.
B
24
Making a phone call
•
Accept the waiting call and end the
current call
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 68).
End the current call.
B
§Answer§ Accept new call.
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following
options:
Conference
b
Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially. You have established
a connection:
•
accept the waiting call
§Swap§
Accept the waiting call,
putting the current call on
hold to do so. Always pro-
ceed as above to swap
between the two calls.
y menu§ Open the menu and select
Hold. The current call is
put on hold.
Ending call(s):
B
Press the End key
. The
Now dial a new number.
J
following query is dis-
When the new connec-
played: Return to held call?
tion is established ...
Accept the waiting call by
y menu§ ... Open the menu and
select Conference. The
pressing §Yes§.
held call is joined.
Or
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End the second call also
by pressing §No§.
•
Reject waiting call
End
§Reject§
Reject the waiting call.
All calls in the conference
Or
§Divert§
B
are ended simultaneously
The waiting call is
diverted, for example, to
the mailbox.
when the End key is
pressed .
Making a phone call
25
Call menu
The following functions are only
available during a call:
Direct call
If this is active, only one phone
number can be dialled.
y menu§ Open menu.
Switch on
Hold
(p. 23)
§Menu§ ¢ m ¢ Security
¢ Direct call
Microphone
on
Switch microphone on/off.
If switched off, the person
on the other end of the line
§Select§
Press.
Enter phone code.
J
Also: *Hold down.
When first prompted you define and
enter the phone code (4- to 8-digit).
Please ensure you take a note of the code
(see also p. 18).
Handsfree
Volume
(p. 22)
Adjust handset volume.
(See above)
Conference
Durat/charges
§OK§
Confirm input.
ing during the call.
§Change§ Press.
·/J Select phone number
from Phonebook (p. 32)
or enter again.
Send DTMF
(p. 20)
Call transfer
L
The original call is con-
nected to the second one.
For you, both calls are
now ended .
§OK§
Confirm "On".
Main menu
Call status
Access to the main menu.
List all held and active
calls (e.g. conference call
participants).
26
Making a phone call
Apply
_
g
Service provider
01.10.2003
10:10
Carol
>
Use the right soft key and
hold it down to dial (e.g.
Carol's phone number).
Switch off
ꢀ
Hold down:
J
Enter phone code.
Confirm input.
§OK§
§Change§ Press.
§OK§
Confirm "Off".
Additional notes
Change phone code..........................p. 18
Text entry
27
Press briefly: Special char-
*
Text entry
acters are shown.
Hold down: Open input
menu.
Text entry without T9
Press number key repeatedly until
the required letter appears. The cur-
sor advances after a short delay.
Example:
Press once/repeatedly:
. , ? ! ’ " 0 - ( ) @ / : _
0
1
Hold down: Writes 0.
Writes blank. Press twice
= skip line.
Pressing briefly once types
2
the letter a, twice the let-
ter b, etc.
Special characters
Hold down to write the
number.
Press briefly. The charac-
ter map is displayed:
*
Ä,ä,1-9
Umlauts and numbers are
displayed after the rele-
vant letters.
1
)
¿
’
¡
:
_
*
;
.
,
?
!
+
-
"
/
(
)
$
¤
{
¥
}
£
~
§Clear§
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
€
@ \
&
|
#
^
[
]
%
<
=
>
§
Γ
∆
Θ Λ
Ξ
Π
Σ
Φ Ψ Ω
Move the cursor
(forwards/back).
H
ꢀ
1) Line skip
G,H Navigate to characters.
Press briefly: Swap
T9
between abc, Abc, abc,
§Select§
Press.
T9
T9
Abc, ABC, 123. Status
indicator in the top line of
the display.
Hold down: All input modes
are displayed.
28
Text entry
§Select§
Confirm, the new lan-
guage is set. Languages
with T9 support are
Input menu
With text input:
marked by the T9 symbol.
Hold down: The input
*
menu is displayed:
Text format (SMS only)
Input language
Mark text
Create a word using T9
Since the display changes as you pro-
ceed,
it is best if you finish a word without look-
ing at the display.
Copy/Add
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
Text entry with T9
T9 deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
Press briefly for T9Abc
then
ꢀ
4 6 8 3 5
Activate, deactivate T9
§Options§ Open text menu.
T9 input Select.
Press. A blank ends a
1
word.
Do not use special characters such as
Ä but rather use the standard charac-
ters, e.g. A; T9 will do the rest for you.
T9 preferred
Select.
§Change§ Activate T9.
Select Input language
Select the language in which you
want to compose your message.
§Options§ Open text menu.
T9 input Select.
Input language
Select.
Text entry
29
T9 word suggestions
Additional notes
Setting a full stop. Word is
If several options are found in the
dictionary for a key sequence (a
word), the most probable is dis-
played first. If the word you want has
not been recognised, the next sug-
gestion from T9 may be correct.
0
ended when followed by a
blank space. Within a word, a
full stop represents an apostro-
phe or hyphen:
e.g. §provider.s§ = provider’s.
Move to the right. Ends a word.
Press briefly: Swap between:
abc, Abc, T9abc, T9Abc, 123.
Status indicator in the top line
of the display .
D
The word must be displayed as §inver-
ted§. Then press
ꢀ
buttons. The displayed
»
word is replaced with a
different word. If this
word is also incorrect,
are displayed.
buttons. Repeat until the
»
*
correct word is displayed.
characters (p. 27).
Hold down: Open input menu
(p. 28).
If the word you want is not in the dic-
tionary, it may be written without
T9.
™
SMS
At 8 h we are
1
___
748
Spell
»
To add a word to the dictionary:
§Spell§ Select.
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §Save§ to add it
automatically to the dictionary.
30
Text entry
Correct a word
Words written with T9:
Predef. texts
The phone contains predefined texts
that you can add to your messages
(SMS, MMS). You can also create and
store up to 5 personal stored texts.
Each stored text can contain up to
32 characters.
Move left or right, word
H
by word, until the
required word is §inverted§.
Scroll through the T9
word suggestions again.
»
Unlike personal stored texts, prede-
fined texts cannot be changed or
deleted.
§Clear§
Deletes the character to
the left of the cursor and
displays a new possible
word!
Write personal stored texts
Words not created using T9:
§Menu§ ¢ ] ¢ Predef. texts
Move letter by letter to
H
the left/right.
§Options§ <New entry> Select.
§Clear§
Deletes the letter to the
left of the cursor.
Write personal stored
J
text.
Letters are inserted at the
cursor position.
J
§Save§
Press. The text is saved.
Additional notes
Use predefined texts
Within a "T9 word", individual letters may
not be edited without removing T9 first. In
most cases it is better to rewrite the com-
plete word.
Write message text (SMS,
MMS).
J
§Options§ Open text menu.
®
T9 Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Canadian Pat. No. 1,331,057;
Select Predef. texts.
G
Select predefined text
from the list.
United Kingdom Pat. No. 2238414B;
G
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and addi-
tional patents are pending worldwide.
§Select§
Confirm. The predefined
text is inserted into the
text to the left of the
cursor.
Phonebook
31
Number:
Phonebook
Always enter phone number with an
area dialling code.
Enter frequently used phone num-
bers in the Phonebook with a special
name. To dial them, simply highlight
the name. If a phone number is
stored with a name, it appears on
the display when you are called.
Important numbers can be assigned
to different groups.
Name:
Enter first and/or last names.
E-Mail:
Enter- email address for MMS (max.
for 50 addresses).
Group:
Default: No group
<New entry>
§Change§ Entries can be organised
Open Addressbook (in
by groups, (p. 35) e.g.:
F
standby mode).
Family, Friends, VIP, Other
Location:
Default: SIM
NPhonebook
Ú
<New entry>
Select location: Mobile, SIM
H
or Protected SIM (p. 34).
Record no.:
Select
Display of entry fields.
Select input field.
Each entry is automatically assigned
a record number. You can also dial
using the record number (p. 32).
§Select§
G
Change the record
number.
H
Fill in input field. The
maximum number of
characters available is
shown at the top of the
display.
J
§Save§
Press to store the new
entry.
Additional Information
Store control codes............................p. 36
Text entry ..........................................p. 27
32
Phonebook
Call (search for an entry) Phonebook menu
The following functions are availa-
Open Phonebook.
F
ble, depending on the current situa-
tion. Some functions may be applied
to the current entry as well as multi-
ple highlighted entries:
/
Select a name with the
first letter and/or scroll.
G
J
Number is dialled.
A
§Options§
Open menu.
Call using record no.
A record number is automatically
assigned to every new entry in the
Phonebook.
View
Display entry.
Edit
Open entry for editing.
Create new entry.
Delete entry.
New entry
Delete
Delete all
Enter input number.
J
Press.
ꢀ
Delete all entries after
confirmation.
Press.
A
Picture
Assign a picture to a
Phonebook entry.
Edit entry
Send SMS...
Capacity
Send as Phonebook entry
or text.
Select entry in Phone-
book.
F
Display maximum and
available free capacity.
§Options§ Press and select Edit.
Select desired input field.
G
Make change.
J
§Save§
Press.
Phonebook
33
Delete/change image
If a picture is assigned to a phone
number, it can be deleted or
replaced.
Assign picture
Assign a max. of 50 phone numbers
to an individual picture. This picture
will appear in the display when there
is a call from this number.
Select entry with picture
G
›
in Phonebook.
Open Phonebook.
F
§Options§ Press.
/
Select entry.
I
J
§Select§
§Delete§
Select pPicture.
§Options§ Open menu.
The assignment is cleared
after confirmation.
Select Picture. A picture
list is displayed.
G
Select picture.
Additional notes
One picture can be assigned to multiple
phone numbers.
G
§Open§
Picture is displayed.
Add pictures ......................................p. 84
Siemens City Portal...........................p. 19
§Select§
The picture is assigned to
the phone number and it
appears with a ›symbol
in the Phonebook.
34
Phonebook
<Protected SIM>
b
<Special books>
On special SIM cards, phone num-
bers can be stored in a protected
(p. 18).
Open Phonebook.
F
<Special books>
Select.
Activate with the function Only ‚
(p. 74).
<OwnNumbers>
Enter "own" phone numbers in
Phonebook (e.g., fax) for informa-
tion. These numbers can be
changed, deleted and also sent as an
SMS message.
<Mobile>
Phonebook entries are stores in the
phone memory if the SIM card is full.
Phone number addition in Phonebook.
Digits may be replaced by a "?" when
phone numbers are entered in the Phone-
book:
<Service number> /
<Info numbers>
There might be phone numbers
saved in your Phonebook that have
been provided by your service pro-
vider. They may be used to call local
or national information services or to
use services offered by your service
provider.
*
Hold down.
These wildcards must be replaced with
numbers before dialling (e.g., with the
extension numbers in a phone system).
To make a call, select the phone number
from the Phonebook.
A
J
A
Press.
<SIM phonebook> (Standard)
Entries that are stored in the Phone-
book on the SIM card can also be
used on a different GSM phone.
Replace "?" with digits.
Press, number is dialled.
Phonebook
35
Groups menu
Groups
§Options§
Open menu. See "Phone-
book menu", p. 32, for
details.
Four groups are specified in your
phone to enable you to arrange your
Phonebook entries clearly. You can
rename these groups.
Ring tone for group
If you assign a ring tone to a group, it
sounds when one of the group mem-
bers rings.
Open Addressbook (in
H
standby mode).
<Groups> Select (the number of
entries is listed behind the
group name).
§Menu§ ¢ ç ¢ Group calls
Select a group.
I
NGroups
§Select§
I
Confirm.
t
Family
Friends
(5)
(23)
(11)
Ã
Select ring tone.
Confirm.
ÅVIP
§Select§
Rename
Select
Select a group.
Open group.
I
§Select§
or
§Rename§ Select and give group a
name.
Additional notes
No group: Contains all Phonebook entries
that do not belong to a group (name cannot
be changed).
SMS to group ....................................p. 45
36
Phonebook
Control codes (DTMF)
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while a connection exists. These
entries are transmitted directly as
DTMF codes (control codes).
y menu§ Open the call menu.
Send DTMF
Select.
Use Phonebook
Store phone numbers and control
codes (DTMF codes) in the Phone-
book in the same way as a normal
entry.
Enter phone number.
J
Press until a "+" appears in
0
the display (wait for the
connection to be estab-
lished).
Enter DTMF codes (num-
J
bers).
If necessary, wait again
0
for three seconds at a
time for the receiver to
process the entries safely.
Enter a name.
J
§Save§
Press.
You may also store just the
DTMF codes (numbers) and then
send them during the call.
Records
37
Calls received
Accepted calls are listed.
b
Records
Your phone stores the phone num-
bers of calls for convenient redial-
ling.
Calls dialled
Access to the last numbers dialled.
Fast access in standby
A
§Menu§
¢ Z
mode.
§Select§
G
§Select§
G
A
Or
Press.
Erase records
The records are deleted.
Select call list.
Press.
Call list menu
The call list menu can be called up if
an entry is highlighted.
Select phone number.
Dial phone number.
§Options§ Open list menu.
View
Read entry.
Correct no.
Load number into display
and correct it there if nec-
essary.
§View§
Display information on
the phone number.
Copy into d
Save entry in Phonebook.
10 phone numbers can be stored in
each call list:
Delete
Delete entry after confir-
mation.
Calls missed
b
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Delete all
Delete all entries of the call
list after confirmation.
Icon for missed call (in
ꢇ
standby mode). Press the
control key (on the left) to
display phone number.
Requirement: The network supports
the "Caller Identity" feature.
38
Durat/charges
A/c limit
(PIN 2 prompt)
Special SIM cards allow you or the
service provider to define a credit or
period after which the phone is
barred for outgoing calls.
b
Durat/charges
You can display charge details and
the duration of different types of
calls while you speak, as well as set-
ting a unit limit for outgoing calls.
§Menu§
¢
¢ Durat/charges
Z
§Change§ Press, enter PIN 2.
Select type of call:
A/c limit Switch on.
Last call
Enter number of units.
J
All outgoing
§OK§
Confirm.
All incoming
Remain. units
Display data.
Then confirm the credit or reset the
counter. The status display for pre-
paid cards may vary, depending on
the service provider.
§Select§
When displayed, you can:
§Reset§
§OK§
clear display.
end display.
Auto display
Call duration and call charges are
automatically displayed for each call.
Charge sett.
Z
§Menu§
¢
¢ Durat/charges
¢ Charge sett.
Conv.
b
b
(PIN 2 prompt)
Enter the currency in which the
charge details are to be shown.
Personal rate
(PIN 2 prompt)
Enter the charges per unit/period.
Camera (Accessories)
39
Picture
Camera
A shot (especially in high resolution)
requires a few seconds to be proc-
essed.
(Accessories)
ately view, save and send photos by
MMS that you have taken with the
"QuickPic" camera (p. 94). A flash-
light is integrated into the camera.
§Take§
Press. You will hear an
advisory tone when the
exposure time has
expired. The photo is
shown on the display and
saved automatically.
Pictures can be taken in two differ-
ent formats:
• Low resolution:
Flashlight
QQVGA 160x120 pixels, memory
size up to 6KB for sending as an
MMS image (p. 40, p. 50).
Switch on flashlight first:
§Options§ Open menu.
Use flash Select.
• High resolution:
VGA 640x480 pixels, memory size
of one picture up to 40 KB – e. g.
for further editing on PC. To allow
the picture to be viewed on
the phone display, a QQVGA pic-
ture is created for every VGA pic-
ture.
Then take photo with flashlight:
§Load§
Press briefly. The flash-
light is charged (battery
capacity at least
approx. 30 %).
§Take§
Press. The photo is taken
with the flash. You will
hear an advisory tone
when the exposure time
has expired. The photo is
shown on the display and
saved automatically.
§Camera§ Press (in standby mode).
Or
§Menu§ ¢ ꢁ
First the number of shots still availa-
ble is shown (depends on resolution
chosen).
Additional notes
§OK§
Confirm.
Photograph without flash when the function
Use flash is switched on:
The last picture taken is shown.
§Load§
Hold down: The charging
process for the flashlight is
omitted and a shot is taken
immediately without flashlight.
G
Scroll through photos.
40
Camera (Accessories)
Sending a photo by MMS
Camera menu
You can easily send a photo as an
MMS immediately after taking it.
§Options§ Open menu.
§Options§ Open menu.
Use flash
Use flashlight (only when
camera is plugged in)
Send via MMS
Select.
Full
Switch to full screen mode.
screen
§Select§
§Skip§
Press and select the
desired resolution.
Delete
Delete current picture after
confirmation.
Press to skip recording a
melody (p. 51).
Delete all
Delete all pictures after con-
firmation.
The MMS Editor starts. Simply com-
plete the following input fields:
Send via
MMS
Sending a photo by MMS
(low resolution only).
To:
·/JTelephone
number /e-mail address of
the recipient/s.
Info
Display number of shots still
available.
Subject: Title of the MMS (maxi-
Setup
Set resolution:
Low
High & Low
Set display:
Always use fullscreen?
Yesor No.
mum of 40 characters).
The MMS is now ready to send:
§Options§ Open menu.
Send
Select.
Additional notes
Toggle between reduced/full
ꢀ
*
screen.
Switch on display illumination
with or any number key.
If the memory is full or the camera is not
attached:
§Delete§
Delete photo currently shown.
Voice mail/mailbox
41
Voice mail/mailbox
§Menu§ ¢ ] ¢ Msg. setup
Settings:
Your service provider supplies you
with two phone numbers:
b
¢ Voice message
Most service providers offer you an
external answering service. In this
mailbox, a caller may leave a voice
message for you
Save mailbox number
You call this phone number to listen
to the voice mails left for you.
• if your phone is switched off or
not ready to receive,
]
§Menu§
¢
¢ Msg. setup
¢ Voice message
/
Select or enter/change
J
·
• if you are making a phone call
(and Call Waiting is not activated,
p. 68).
phone number
§OK§
Confirm.
If voice mail is not part of your serv-
ice provider's package, you will need
to register and settings may have to
be made manually. The procedure
described below may vary slightly
depending on the service provider.
Save call divert number
Calls are diverted to this phone
number.
m
§Menu§
¢
¢ Divert
¢ e. g. Unanswered ¢ Set
Enter call divert number.
§OK§ Registration with net-
work. Divert will be con-
firmed after a few
seconds.
Further information on call divert
can be found on p. 69.
42
Voice mail/mailbox
Play back messages
A new voice mail can be announced
as follows, depending on the service
provider:
b
\
Icon including beep.
Or
An SMS message
announces a new voice
mail.
…
Or
You receive a call with an automatic
announcement.
Call your mailbox and play the mes-
sage(s) back.
Hold down (if necessary
1
enter mailbox number
once only). Depending on
your service provider con-
firm with §OK§ and
§Mailbox§.
Outside your home network, you
may need to dial a different mailbox
number and enter a password to
access your mailbox.
SMS
43
§OK§
§OK§
Confirm. Send the SMS to
the service centre for
transmission. The sent
SMS is saved in the "Sent"
list.
SMS
You can transmit and receive very
long messages (up to 760 characters)
on your phone. They are automati-
cally composed of several "normal"
SMS messages (note higher
charges).
Back to text input.
Display in the uppermost line:
Additionally you can insert pictures
and sounds in an SMS.
SMS
We start at 8 a.m.
™
1
739
Depending on the service provider,
e-mails and faxes can also be sent
and e-mails received via SMS
™
T9 active.
abc/Abc/A
BC/123
Switch between upper-
case/lower-case letters and
digits.
(change setting if necessary, p. 48).
Writing and sending text
messages (SMS)
SMS
1
Display title.
Number of the required SMS
messages.
739
Number of characters still
available.
Text input using "T9"
J
(p. 28) allows you to cre-
ate longer messages very
quickly using just a few
key strokes.
Additional notes
Insert pictures & sounds into text.......p. 44
SMS profile........................................p. 48
The following may be Message type,
Validity period, Service centre
queried ..............................................p. 48
§Clear§ Press briefly to
delete letter-by-letter,
hold down to delete by
word.
Enter special characters....................p. 27
A
Press.
/
Dial number or pick out
from the Phonebook.
·
§Group§ SMS to group
(p. 45).
44
SMS
Text menu
Picture&sound
§Options§ Open text menu.
Insert pictures and sounds into mes-
sage.
Send
Enter recipient's phone
number/retrieveitfromthe
Phonebook, then send.
Write message.
J
§Options§ Open text menu at the
Save
Save composed text in
draft list.
end of a word.
Select Picture&sound .
G
Picture&sound
Add pictures, animations
and sounds into mes-
The menu contains:
Fix animations
Fix sounds
Predef. texts
Format
Predef. texts insert
(p. 30).
Own anim.
Line feed
Smallfont, Medium font,
Large font
Own pictures
Own sounds
Select area.
Underline
Def. alignment: Left,
Right, Centre (align)
Mark text (highlight text
using control key)
G
§Select§
Confirm.
The first entry of the
selected area is displayed.
Scroll to entry required.
Clear text
G
Delete the whole text.
Insert from...
Insert entry from Phone-
book.
For Fix animations/Fix sounds:
§Select§
The selection is added to
the SMS.
T9 input
(p. 27)
T9 preferred: Acti-
vate/deactivate T9 input.
Input language:Select
language for text.
For Own anim./Own pictures/Own
sounds:
§Load§
The selection is dis-
played/played back.
Send via ...
Select an SMS profile for
transmission (p. 48).
§Select§
The selection is added to
the SMS.
SMS
45
Additional informationn
SMS to group
EMS (Enhanced Messaging Service)
You can send an SMS message as a
"circular" to a recipient group.
This service allows you to send pictures
and sounds as ring tones and screensavers
(except formatted text). Playback only
occurs if the destination phone supports the
EMS standard.
This can result in messages that are longer
than a single SMS. If this happens the indi-
vidual SMS messages are linked together
to form a single message.
§Options§ Open menu.
Send
Select.
§Group§
Press. The Phonebook is
opened. There are the fol-
lowing options:
• Highlight individual entries.
• Select <Groups>, open a group and
highlight individual entries/all
entries there.
SMS status report
If the message cannot be transmitted to the
service centre you are offered the chance
to repeat the transmission. If this also fails,
contact your service provider.
The Message sent!message only indi-
cates transmission to the service centre.
This will then attempt to relay the message
within a certain period.
• Select <Groups>. Select a group.
§Send§
Press. The first of the
highlighted recipients is
displayed. If this recipient
has several phone num-
bers, one number can be
selected.
See also Validity period, p. 48.
SMS push
§Skip§ Skip recipient.
This function allows you to dial an Internet
address (URL) directly from a received
SMS. The URL is displayed as inverted
after the highlighting. Pressing the Call key
automatically starts the WAP browser and
dials the highlighted Internet address.
§Send§
Transmission is started
after confirmation.
46
SMS
Phone number/URL in SMS
Receiving SMS
Phone numbers §inverted§ in the text can
can also mark URLs (Internet addresses),
call them directly and run them. To this end
the WAP profile (p. 60) must be set and
activated.
…
Arrival of new SMS
announced on display.
_
g
Service provider
Press to dial phone
A
number/download.
01.10.2003
10:10
Menu
TMessage memory full
…
ory is full. No more SMS messages can be
received. Delete or file text messages
(p. 48).
<
To read the SMS, press left
soft key.
Reply menu
Date/time
No./sender
Message
01.10.2003
10:10
§Reply§
Open reply menu.
55536989876
What about meeting
tomorrow?
Write mess.
Create a new reply
text.
Edit
Edit received SMS or
add new text.
Answer is YES
Answer is NO
Scroll through message
line by line.
Add YES to the SMS.
G
Add NO to the SMS.
§Reply§
See below.
Call back
Delay
Add a standard text as
a reply to the SMS.
§Options§ See p. 47.
Thank you
Once the SMS has been edited, it can
be saved or sent with §Options§.
SMS
47
Lists menu
Lists
Each list offers different functions:
All SMS and MMS messages are
stored in one of the following lists
according to status.
§Options§ Open menu.
View
Read entry.
Inbox
Reply
Directly answer incoming
SMS messages.
§Menu§ ¢ ] ¢ Inbox ¢ SMS
The list of received SMS messages is
displayed.
Delete
Delete all
Send
Delete selected SMS
messages.
Delete all SMS mes-
sages after confirmation.
]
Inbox
ƒ 0555123454
Dial number or select
from the Phonebook,
then send.
… Carol
… Mike
View
Options
Edit
Open SMS message to
edit.
Draft
Capacity
Display free capacity on
SIM card/phone. In case
of segments: number of
concatenated SMS mes-
sages.
§Menu§ ¢ ] ¢ Draft ¢ SMS
The list of as yet unsent SMS mes-
sages is displayed.
Mark a.unread
Mark the message as
unread.
Unsent
§Menu§ ¢ ] ¢ Unsent ¢ SMS
Save to d
Accept a highlighted
phone number
The list of concatenated SMS mes-
sages not yet fully sent is displayed.
You can restart sending.
into Phonebook .
Archive
Shift SMS message to
archive.
Sent
Send via ...
Picture&sound
Select an SMS profile for
transmission (p. 48).
§Menu§ ¢ ] ¢ Sent ¢ SMS
The list of sent SMS messages is dis-
played.
Save pictures or sounds
from the SMS.
48
SMS
SMS archive
SMS profiles
]
§Menu§ ¢ ] ¢ SMS archive
§Menu§
¢
¢ Setup
¢ SMS profiles
The list of SMS messages stored in
the phone is displayed.
A maximum of 3 SMS profiles can be
set. They define the transmission
characteristics for an SMS. The pre-
setting depends on the SIM card
inserted.
Ñ\SMS archive
ꢊ INBOX
ꢊ DRAFT
ꢊ UNSENT
G
Select profile.
Open
Options
§Options§ Open menu.
Change sett.
Unread.
…
ƒ
Select.
Read
Draft.
Sent.
Service
centre
Enter or change the service-
centre phone numbers as
supplied by service provider.
‚
„
Recipient
Enter the standard recipient
for this transmission profile or
select from the Phonebook.
Entry on SIM card.
¢
Concatenated message.
X
Message Manual
type
Different functions are available
depending on the context:
The message type is
requested for each message.
Standard text
Archive menu
§Options§ Open menu.
Normal SMS message.
Fax
Transmission via SMS.
E-mail
View
Send
Read entry.
Dial number or select from
the Phonebook, then send.
Transmission via SMS.
New
Edit
Open text input for editing.
You may need to obtain the
required code number from
your service provider.
SMS
49
Validity
period
Select the period in which the
service centre tries to deliver
the message:
Manual, 1 hour, 3 hours, 6
hours, 12 hours, 1 day, 1
week, Maximum
* Maximum period that the
service provider permits.
Status
report
L
You will receive confirmation
whether delivery of a mes-
sage has been successful or
unsuccessful. This service
may be subject to a charge.
Direct
reply L
The reply to your SMS mes-
sage is handled via your serv-
ice centre when Direct Answer
is activated (for information
please contact your service
provider).
SMS via
GPRS
L
Send SMS automatically by
GPRS (if available).
Requirement: GPRS is acti-
vated (p. 72). Ensure that
your service provider offers
this function.
Save aft.
send
Sent SMS messages are
saved in the Sent list.
Activate profile
G
Select profile.
§Activate§ Press to activate profile.
50
MMS
Pictures and graphics that have been
produced with accessories such as
the QuickPic camera (p. 94) and can
be attached in JPEG, WBMP, GIF or
GIF format. See also Own stuff, p. 84.
MMS
The Multimedia Messaging Service
enables you to send texts, pictures
(also photos) and sounds in a com-
bined message to another mobile
phone or to an e-mail address. All
elements of an MMS message are
merged to form a "slide show".
Music is sent and received in a
MIDI file, single tones/sounds in an
AMR file.
Navigation
Depending on your phone's settings,
you will receive either the complete
message automatically or notifica-
tion that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Scroll line by line with the
G
control key.
§Menu§ ¢ ] ¢ New MMS
Ÿ
MMS editor
To:
Ask your service provider whether
this service is available. You may
need to register for this service sepa-
rately.
Subject: 1
Options
º
Writing/sending MMS
messages
Input fields:
To:
·/JPhone
number/e-mail address of
recipient/s.
An MMS consists of the address
header and the content.
Subject: Enter MMS heading (up to
An MMS message can consist of a
contain text, a sound and an image.
40 characters)
Picture:
§Insert§ buttons. The pic-
ture list is opened for
selection.
Texts can be written with the help of
T9 (p. 28).
Additional information
You can also easily send an image by MMS
immediately after taking it with the QuickPic
Camera (see p. 40).
MMS
51
Text:
§Edit§ buttons. Write text
with the help of T9. Text
menu, see p. 52.
Attach extra pages
§Options§ Open menu.
Sound:
now select a stored
melody (see also Own
stuff, p. 84) or record a
new melody (see below).
New slide Select.
Additional notes
No more than 20 phone numbers/
addresses, (of 50 characters each) can be
addressed.
Slide duration:
Enter length of display for
§Options§ MMS main menu .............. p. 52
individual pages (mini-
mum 0.1 seconds).
Check MMS
Check the MMS message before
sending it:
Record new melody (ring tone) for MMS
If you press §Insert§ in the Sound: field
when completing the input fields,
you have the option of recording a
new melody for sending messages
by MMS.
§Options§ Open menu.
Preview slide
View a single page.
Prev. message
§Record§ Press. Recording starts,
and the maximum availa-
ble time and recording
Play back the whole MMS
in the display. Cancel by
pressing any key.
duration are displayed.
§Stop§
End recording.
52
MMS
Send MMS
§Options§ Open menu.
Delete slide
Preview slide
Slide list
Delete page currently dis-
played.
Send
Select.
Playback of complete
page.
Text menu
Display pages available
for selection.
§Options§ Open menu.
Prev.
message
Playback of complete
MMS. Use any key to can-
cel.
Line feed
Save
Start new line.
Save MMS text.
Delete the whole text.
T9 input
(p. 28)
T9 preferred: Acti-
vate/deactivate T9 input.
Clear text
Input language: Choose
language in which the text
is to be written.
T9 input
T9 preferredActi-
(p. 27)
vate/deactivate T9 input.
Input languageSelect lan-
guage for text.
Attributes
Extras
Date:, Size:, Priorität:
display MMS.
Predef. texts
Predef. texts insert (p. 30).
Specifying additional
properties for the MMS.
MMS menu
Different functions are available
depending on the context:
§Options§ Open menu.
Insert line
Extend address field by
one line.
Delete
Delete entry.
Insert from...
Insert entry from Phone-
book.
Send
Send MMS.
Save
Store MMS in the draft list.
New slide
Insert new page behind
current one.
Delete item
Delete element on a page.
MMS
53
Attachment
A single MMS can contain several
attachments.
Receive MMS
/
Indicates reception or
ꢄꢅ
notification of an MMS.
§Options§ Open menu.
_
g
Attachment
Service provider
Select.
Select attachment.
G
01.10.2003
10:10
§Open§
The attachment is opened
with the available applica-
tion.
Menu
ꢄ
<
To read the MMS or notifi-
cation, press left soft key.
§Save§
The attachment is saved
under a name.
Depending on the setting, (p. 55)
the
Pictures and sounds
• complete MMS is received
Pictures and sounds in a received
MMS can be saved separately, e.g.
for use as ring tone melodies or as
background graphics. To this end,
stop the MMS using any key or scroll
to the desired page.
• Open notification. Press §Receiving§
to receive the complete MMS.
Press any key to cancel function.
§Play§
Automatic presentation
of MMS. Use any key to
cancel.
§Options§ Open menu.
Content
Select.
Scroll page by page using
the control key.
G
J
Proceed as for attach-
ments above. Show as
icons at the top of every
page.
Call up individual pages
directly by number key.
Functions for editing MMS can be found
under §Options§.
54
MMS
Lists menu
Each list offers different functions:
Lists
All MMS messages are stored in one
of the following lists.
§Options§ Open menu.
Inbox
Play
Edit
Play back MMS.
§Menu§ ¢ ] ¢ Inbox ¢ MMS
Open text input for editing.
Reply to MMS immediately.
The list of MMS messages and notifi-
cations received is displayed. To
receive an MMS afterwards, open
notification and press §Empfang§.
Reply
Receive
MMS
Start inward transmission
of MMS when only notifica-
tion is highlighted (p. 55).
Draft
Receiv.all
MMS
Start receipt of all new
MMS messages.
§Menu§ ¢ ] ¢ Draft ¢ MMS
The list of as yet unsent MMS mes-
sages is displayed.
Forward
Forward MMS to new
recipients.
Unsent
Delete
Delete selected MMS
messages.
§Menu§ ¢ ] ¢ Unsent ¢ MMS
Delete all
Delete all entries after
confirmation.
The list of MMS messages not yet
successfully sent is displayed.
Mark
a.unread
Mark MMS as unread.
Sent
Save to d
§Menu§ ¢ ] ¢ Sent ¢ MMS
Copy phone number/e-mail
address into Phonebook.
The list of sent MMS messages is dis-
played.
Attributes
Information on MMS is
displayed:
• Sender
• Arrival time
• Subject
• Size
• Priority
Capacity
Size of current MMS as well
as capacity still available
are shown.
MMS
55
Preview
slide
MMS pr]ofiles
¢ Setup
Play back current page.
§Menu§
¢
Slide list
Attachment
Content
Display pages available for
selection.
¢ MMS profiles
3 MMS profiles can be selected. The
transmission characteristics of an
MMS are defined in these.
Open list of attachments
received.
Selection of page contents
to be archived, such as pic-
ture or sound.
G
Select profile.
§Options§ Open menu.
Save
Store MMS in outbox list.
Change sett.
Select.
Symbol Meaning
‰
MMS unread
Expiry time
Select the period in which
the service centre tries to
deliver the message:
Manual, 1 hour, 3 hours,
6 hours, 12 hours, 1 day,
1 week, Maximum*
MMS read
‡
†
ꢋ
MMS draft
MMS sent
MMS read and forwarded.
* Maximum period that the
service provider permits.
Ý
Þ
MMS read with despatched
confirmation
Def. priority
Def. duration
Send priority: Medium,
High, Low
Û
Ü
Notification unread
Notification read
Length of display for an
MMS page (standard
requirement).
56
Retrieval
MMS
Activate profile
Receive complete MMS or
only notification of arrival.
Automatic
Receive complete MMS
immediately.
G
Select profile.
§Activate§ Press to activate profile.
Auto.homenet
T9 settings
Receive complete MMS
immediately in home net-
work
Manual
Only the notification is
received.
§Menu§ ¢ ] ¢ Setup
¢ Select a function.
T9 preferred
Activate/deactivate intelligent text
entry (see also p. 28).
MMS
relaysrv.
MMS relay URL, e.g.
http://www.webpage.com
Input language
Select language for text entry. Lan-
guages with T9 support are marked
by the T9 symbol.
IP settings
Enter IP
address:IP-address.
Port: * Enter port number.
IP address: Enter
IP-address.
Port: * Enter port number.
These settings can be dif-
WAP browser.
Conn.profile:
Select or set access pro-
file (p. 72).
CB services
§Channel: Select
57
CB ser]vices
§Options§ Open list menu.
§Menu§
¢
¢ Msg. setup
If a topic is selected in the list you
can view it, activate/ deactivate it,
edit it or delete it.
¢ CB services
Some service providers offer infor-
mation services (info channels, Cell
Broadcast). If reception is activated,
your Topic listwill supply you with
messages on the activated topics.
To switch to "full page view":
ꢀ press, then press §View CB§.
Displays
Receive CB
p,o Topic activated/deactivated.
You can activate and deactivate the
CB service. If the CB service is acti-
vated, standby time for the phone
will be reduced.
New messages received on
…
the topic.
ƒ
Messages already read.
CB messages are displayed in
standby mode, longer messages are
automatically scrolled.
Topic list
Enter these in your list of interesting
topics.
New topic Select.
Enter topic with channel number
and name and confirm with §OK§ .
58
Surf & fun
For example the start menu appears:
Surf & fun
Í Start menu
1 Home
É
Internet browser (WAP)
2§Bookmarks§
3 Resume
É
§Menu§
¢
¢ Select function
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
Internet access may required regis-
tration with your service provider.
Select
Select desired function.
Confirm.
G
§Select§
Home
b
Start menu
A connection is established with the
Internet provider’s portal (may be
specified/configured by default by
your service provider).
Home
The connection to the
Internet provider's portal is
established (may be
set/preset by the service
provider).
Bookmarks
List of URLs for fast access.
Bookmarks
Resume
List of URLs for fast
access.
Internet
b
Call up recently visited
pages that are still in the
memory.
The browser is activated as soon as
you call up the function. The func-
tions of the soft keys vary, depend-
ing on the internet page, for exam-
ple "link" or "menu". The contents of
the option menus are also variable. If
necessary, set the way in which WAP
access should be made (see browser
menu, Setup, Start with..., p. 59).
Inbox
Inbox for messages from
the WAP server (WAP
push).
Profiles
The list of profiles is dis-
played for activation/set-
ting (p. 60).
Exit browser
Close the browser and
shutdown the connection.
Surf & fun
Reload page.
59
End connection
Reload
Inbox
Hold down to clear down
Inbox for messages from
the WAP server
(WAP push).
B
the connection and close
the browser.
Disconnect
Save bitmap
End connection.
Your Internet browser is licensed by:
Save picture(s) of dis-
played page.
More ...
See below.
Exit browser
Close the browser and
shutdown the connection.
Browser menu
If the browser is active, the menu
can be activated as follows:
More ... (in menu)
Profiles
The list of profiles is dis-
played for activation/set-
ting (p. 60).
Press
A
or
Setup
Font size
Protocol parameters
• Push
• Push can force online
• Timeout for unanswered
network requests
E
Í confirm.
Home
A connection is estab-
lished with the Internet
provider’s portal (may be
specified/configured by
default by your service
provider).
Security
• Secure prompt
• Current certificate
• CA certificates
• Private Key PINs
• Authentication
Start with...
• Start menu
• Browsermenü
• Home
Bookmarks
Resume
Up to 50 URLs stored in
the phone for fast access.
Call up recently visited
pages that are still in the
memory.
Go to...
Enter URL to access WAP
page directly, e.g.
• Resume
• Bookmarks
wap.my-siemens.com
Select from list of most
recently visited WAP
addresses.
60
Reset
Surf & fun
Activate WAP profile
Restart session and clear
cache.
You can change the current profile
each time before accessing the Inter-
net.
About
Openwave
Display browser version.
G
Select profile.
Additional notes
Í
Browser menu.
Offline.
Online.
GPRS online.
No network.
§Select§
Activate. The current pro-
file is selected.
É
Ê
Ë
Ì
*
WAP profile setting
Up to 5 WAP profiles can be config-
ured (may be limited by the service
provider). The specifications may
vary according to service provider:
Select special characters,
such as @, ~, \ , see p. 27
or
G
Select profile.
0
press repeatedly for:
. , ? ! ’ " 0 - ( ) @ / : _
§Edit§
Open to make settings.
Profile name
Enter/change name.
WAP profiles
¢ É ¢
Preparation of the phone for WAP
Internet access depends on your
service provider:
§Menu§
Internet
WAP param.
IP address:
Port:
b
¢
Profiles
Enter IP- address.
Enter port number.
Homepage:
Enter homepage, if not set
by the service provider.
• The settings have already been
installed by your provider. You can
start immediately.
GPRS
Time in seconds after
lingertime
which a connection should
be ended if no input or data
• Access profiles for a number of
service providers have already
been set. Then select and activate
profile.
CSD
lingertime
Conn.profile:
Select or set access profile
(p. 72).
• The access profile must be set
manually.
§Save§
Save settings.
Check with your service provider if
necessary.
Surf & fun
61
Games and applications
Applications and links that are al-
ready stored on the phone are found
under:
Games & more
Download games and other applica-
tions. You are advised about relevant
applications on the Internet. Once
you have selected a game or applica-
tion you can start to download it im-
mediately. Then you can use the ap-
plication. Most applications include
instructions.
É
§
§Menu§ ¢
¢ Games & more
\
ꢊ Download new
§
Game
¦Application
To download applications, the WAP
profile(p. 60), HTTP profile (p. 73) and ac-
cess (p. 73) must be configured.
Options
Internet
Different functions are available de-
pending on which entry is highlight-
ed:
Depending on the service provider, the ac-
cess and functionality could differ from the
present description.
Sounds (ringer)/silent alert on/off ......p. 79
ꢊDownload new
Applications and games can be
found at:
§Internet§ The selected Internet
page is loaded.
§
wap.my-siemens.com
or on the Internet at:
Carry out game/application offline
§Select§
Loadable application can
be started immediately.
¦Load game/application online
§Select§
Only description file, ap-
plication has still to be
loaded.
62
Surf & fun
Receive information
Games & More Options
If information required, say, by an
application that has already been in-
Processing and managing your appli-
cations and folders:
§
stalled, is received via SMS, the
Start
Start application.
symbol appears in the display. By
pressing the left control key, the rel-
evant application is started and the
information is processed.
Download
An application is download-
ed from the Internet and in-
stalled.
Delete
Delete selected applica-
tion/folder.
Games
Games are stored in the telephone.
Select the desired game. You will
find special instructions or informa-
tion for each game in the option
menu.
Delete all
Rename
Delete all applications/fold-
ers after confirmation.
Rename highlighted appli-
cations/folders.
Key control
The following key control is used for
many games (virtual joystick):
HTTP
profile
The list of profiles is dis-
played for activation/setting
(p. 73).
Reinstall
More info
Reinstall an application (up-
date).
1 3
2
Download further instruc-
tions via Internet (WAP), if
available.
6
4
5
7
89
Details
Show details of the applica-
tion/folder (name, version,
size, path, producer, date).
function
depends on the game
or use the key I.
Surf & fun
63
Additional information
WAP can be used to download applications (e.g.,
ringtones, games, pictures, animation) from the
Internet. Downloading or running applications will
not affect or change the software already in-
stalled on your Java™-enabled mobile phone.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
not included in the original delivery package. This
also applies to functions enabled subsequently at
the customer's instigation. The purchaser bears
sole risk for the loss of, damage to, and any de-
fects arising in, this device or the applications and
for any direct damage or consequential damage
of whatever nature resulting from the use of these
applications.
For technical reasons, such applications and sub-
sequent enabling of certain functions are lost in
the event of the device being replaced/re-sup-
plied and may be lost if it is repaired.
In these cases the purchaser will need to down-
load the application again or re-enable it as well.
Note that your device has Digital Rights Manage-
ment (DRM) so that individual applications down-
loaded via WAP are protected against
unauthorised copying. These applications are on-
ly intended for your device and cannot be trans-
mitted from this device for backup purposes.
Siemens does not warranty or guarantee or ac-
cept any liability for the customer's ability to
download, enable, or back up applications again
or to do so free of charge. Back up your applica-
tions on the PC, if this is technically possible, us-
ing Siemens Data Exchange Software (p. 85).
64
Setup
Setup
Setup
Edit a default profile or create a new
personal profile:
Profiles
G
Select profile.
¢
¢
§Menu§
m
Profiles
Several settings can be stored in a
phone profile in order, for example,
to adapt the phone to the surround-
ing level of noise.
§Options§ Open menu.
Change sett.
Select.
The list of available functions is
displayed:
• Five profiles are standard with
default settings, they can be
changed however:
Big letters.......................................... p. 66
Illumination ....................................... p. 67
Normal envi.
Quiet environ.
Noisy environ.
Car Kit
Headset
• You can set two personal profiles
When you have finished setting a
function, you return to the profile
menu where you can change a fur-
ther setting.
• The special profile Aircraft mode is
fixed and cannot be changed,
(p. 65).
Activate
Additional notes
Select default profile or
½
Active profile.
G
personal profile.
§Activate§ Activate profile.
½
Quiet environ.
Activate
Options
Setup
65
Profile menu
Aircraft mode
The alarm tone is deactivated. An
§Options§ Open menu.
alarm is only shown on the display. It
is not possible to modify this profile. The
phone will switch off if you select
this profile.
Activate
Activate selected pro-
file.
Change sett.
Copy from
Rename
Change profile
settings.
Activate
Scroll to Aircraft mode.
G
Copy settings from
another profile.
§Select§
Switch on profile.
Change personal pro-
file (except default
profiles).
A security prompt must be
confirmed.
The phone switches itself
off automatically.
Car Kit
If a Siemens original Car Kit is used
(p. 95) the profile is activated auto-
matically as soon as the phone is
inserted into the cradle (p. 68).
Normal operation
The next time you switch on the
phone and return to normal opera-
tion the default profile will be acti-
vated.
Headset
If an original Siemens headset is
used (p. 94), the profile is activated
automatically when the headset is
used.
66
Setup
Logo
Display
Choose picture to be displayed
instead of the provider logo, or
¢
¢
§Menu§
m
Display
Select a function.
¢
Download new
Language
Download new logo from
the Internet.
Set the language of the display text.
When "automatic" is set, the lan-
guage of your home service provider
is used. If a language that you do not
understand happens to be set, the
phone can be reset to the language
of your service provider with the fol-
lowing input (in standby mode):
Colour scheme
Select colour scheme for the user
interface.
Activate colour scheme
Select colour scheme.
G
* # 0 0 0 0 # A
§Activate§ Activate.
Wallpaper
Own greeting
Enter greeting to be displayed
instead of animation when phone is
switched on.
Set wallpaper graphic for display or .
Download new
Download new wallpaper
images from the Internet.
§Change§ Switch on/off.
Delete old greeting and
J
create new greeting.
§OK§
Confirm changes.
Big letters
You can choose between two font
sizes for the display.
Setup
67
¢
¢
¢
§Menu§
m
Display
Select a function.
Screensaver
¢
¢
§Menu§
m
Screensaver
Illumination
Set display light brighter/darker. The
darker the setting the longer the
standby time.
The screensaver shows a picture on
the display as soon as a period that
can be set by you has elapsed. The
function is ended by an incoming
call or by pressing any key.
Press the control key
repeatedly to adjust up or
down.
G
Enable
Activate/deactivate screen-
saver.
Style
Digital clock, Bitmap or
Contrast
Set display contrast.
Energy saving.
Preview
Timeout
Display the screensaver.
Press the control key
repeatedly to adjust up or
down.
G
Set period after which the
screensaver starts.
Code pro-
tect.
Phone code protected ter-
mination of the screen-
saver.
Additional notes
screensavers by SMS (p. 43), MMS (p. 50)
or WAP (p. 58). See also Own stuff, (p. 84)
and My phone, (p. 19).
68
Setup
Car Kit
Call setup
Only in combination with an original
Siemens handsfree Car Kit (p. 95). If
an original Siemens Car Kit Portable
is used the profile is activated auto-
matically as soon as the phone is
inserted into the cradle.
¢
¢
§Menu§
m
Call setup
¢
Select a function.
Hide ID
b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
Auto answer
(factory default: off)
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
To suppress this display, you can
enable the "Hide ID" mode for all sub-
sequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Shown on the display.
±
Auto phone off
(factory default: 2 hours)
Call waiting
b
The time taken for the phone to
switch off when the ignition is
turned off can be configured.
you can check whether it is set and
you can activate/deactivate it (see
also p. 23).
Car loudspeaker
Any to answer
Incoming calls can be accepted by
pressing any key
Select another audio setting as
needed for your car kit for better
acoustics.
Automatic settings:
• Permanent illumination:
switched on.
(except for
).
B
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
• Key lock: switched off.
• Charging the phone battery.
• Automatic activation of the Car Kit
profile when phone is inserted in
cradle.
Setup
Set up call divert (example):
69
¢
¢
Headset
Only in conjunction with an original
Siemens headset (p. 94). If an origi-
nal Siemens Headset is used the pro-
file is automatically activated when
the headset is plugged in.
¢
§Menu§
m
Call setup
Select a function.
The most common condition for call
divert is, for example:
All calls
All calls are diverted.
b
n
Symbol in the top line of
the display in standby
mode.
Auto answer
(factory default: off)
Unanswered
b
Calls are accepted automatically
after a few seconds (except where
the ringer is switched off or set to
beep). You should therefore be
wearing the headset. Eavesdropping
is possible!
Select Unanswered.
G
(Includes the conditions
Not reachable, No reply,
Busy see below)
§Select§
Set
Press.
Automatic setting
Select.
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
Enter the phone number
to which the caller will be
diverted (if not already
done)
J
Auto answer
Or
·
If you do not notice that you phone has
accepted a call, there is the danger that the
caller may eavesdrop.
Select this phone number
from the Phonebook or
via §Mailbox§.
§OK§
Confirm. After a short
pause, the setting is con-
firmed by the network.
Divert
¢
¢
§Menu§
m
Divert
Select a function.
¢
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
70
Setup
Not reachable
Additional notes
Divert occurs if phone is switched off
or is out of range.
Note that the divert is stored in the network
and not in the phone (when the SIM card is
changed for example).
No reply
Check condition or delete it
First select the condition.
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
§Select§
Check status
Select.
Press.
Busy
Or
Delete
Divert occurs if a call is in progress. If
Call waiting is activated (p. 68), you
will hear the call waiting tone during
a call.
Select.
Reactivate divert
The last divert has been stored. Proceed as
with Setting. The stored phone number is
displayed. Confirm phone number.
Status check
You can check the current divert sta-
tus for all conditions.
Edit phone number
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
Proceed as with "Set divert". When the
stored phone number is displayed:
§Delete§
Press. The phone number is
deleted.
p
Condition set.
Not set.
Enter new number and confirm.
o
Display if status is
unknown (e.g. with a new
SIM card).
s
Clear all
All set diversions are cleared.
b
Setup
71
DST
Clock
Activate/deactivate selec-
tion. A sun is displayed
when summer time is acti-
vated.
¢
¢
§Menu§
m
Clock
Select function.
¢
View
Display selected time zone
with date and time.
Time/Date
The clock must be set correctly once
at start-up.
Set
Set time zone.
§Change§ Press.
Rename
Rename the time zone.
Auto
The time zone is automati-
cally converted to local time
by the network.
First enter the date
J
timezone
(day/month/year), then
the time (12 hours,
including seconds).
L
Date format
Additional notes
If the battery is removed for longer than 30
seconds, the clock must be reset.
DD.MM.YYYY or MM/DD/YYYY or
YYYY-MM-DD
Show clock
Setting of the date format to:
Activate/deactivate time display in
standby mode.
DD:
MM:
Day (2-digit)
Month (2-digit)
YYYY: Year (4-digit)
Buddhist year
Switch to the Buddhist calendar (not
available in all models).
Time format
Select 24h or 12h.
Time zones
Specify your current time zone.
Select the desired time
F
zone from the list ...
§Set§
... Apply it.
§Options§
Open menu.
72
Setup
Data services
Connectivity
For the MMS, WAP and Java applica-
tion at least one connection profile
must be set up and activated. Pre-
sets of the phone depends on cur-
rent service provider. If necessary,
check with your service provider for
details. The current settings for a ser-
vice provider can be found on the
Internet at
¢
¢
§Menu§
m
Connectivity
¢
Select a function.
GPRS
b
For GPRS (General Packet Radio
Service)
GPRS is a new method for transmit-
ting data faster in the mobile net-
work. Use GPRS and if the network
has sufficient capacity, you can be
connected to the Internet perma-
nently. Only the actual transmission
time is charged by the network oper-
ator.
under "FAQ".
G
Select profile.
§Options§ Open menu.
Change sett.
Some service providers do not yet
support this service.
Press, then:
For CSD (Circuit Switched Data)
CSD settings
§Yes§ / §No§ Switch GPRS function
on/off
Select.
Shown in display:
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
«
ª
ꢂ
©
Activated and available.
Registered.
Connection briefly lost.
Download
GPRS info
Display of connection data.
Setup
73
¢
¢
¢
§Edit§
Press.
Enter ISP number.
Menu§
m
Connectivity
Select function.
Dial-up
number
HTTP profile
Call type:
Select ISDN or ana-
logue.
G
Select profile. Enter or
modify settings. If neces-
sary, check with your ser-
vice provider for details.
Login name:
Password:
Enter login name.
Enter password (shown
as a series of asterisks).
Authentication
DNS1 / DNS 2: (optional).
§Save§ Save settings.
¢
¢
§Menu§
m
Connectivity
Authentication
¢
§Change§ Activate or deactivate
encrypted WAP dial-up
(CSD connections only)
(PAP: Personal Authenti-
cation Procedure, CHAP:
Challenge Authentication
Procedure).
For GPRS (General Packet Radio
Service)
GPRS settings
Select.
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone
(p. 72).
§Edit§
Press.
APN:
Enter provider address.
Enter login name.
Login name:
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS 2:
(optional).
§Save§
Save settings.
74
Setup
¢
¢
¢
§Menu§
m
Security
Select a function
Security
¢
¢
§Menu§
m
Security
¢
Select a function
Codes
The phone and SIM card are pro-
tected against misuse by several
security codes.
PIN control, Change PIN, Change PIN2,
Change phonecode, (p. 17).
This SIM only
(Phone-code protected)
b
Direct call
Only one phone number can be
dialled. Hold down the right soft key
(p. 25).
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
Only ‚
(PIN2-protected)
b
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Restricts dialing options to SIM-pro-
tected numbers in the Phonebook. If
only area codes are entered, relevant
phone numbers can be added to
these manually before dialling.
Barrings
b
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit pass-
word which your service provider
will give you. You may need to be
registered separately for each bar-
ring.
If the SIM card does not support PIN
2 input, the whole Phonebook can be
protected with the phone code.
Last 10 only
(Phone-code protected)
All outgoing
Only phone numbers from the call
list of "dialled numbers" (p. 37) can
be dialled. This list can be filled with
phone numbers specifically for this
purpose.
First delete the call list, then create
"new entries" by dialling phone num-
bers and cancelling before the con-
nection is established.
All outgoing calls, except emergency
calls, are blocked.
Outgo internat
(Outgoing international)
Only domestic calls are possible.
Setup
75
¢
¢
¢
Outgo internat. x home barred
§Menu§
m
Security
Select a function
(Outgoing international except
home)
International calls are barred. How-
ever you can make calls to your
home country when abroad.
Phone identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
All incoming calls
Alternatively enter in standby mode:
The phone is barred for all incoming
calls (the forwarding of all calls to
the mailbox offers a similar effect).
# 0 6 #
*
Software version
When roaming
Display of software version in standby
mode:
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
# 0 6 # , then press §Info§.
*
Filesystem clean up
Status check
(Phone code is protected)
The following information can be
displayed after a status check:
The file system is defragmented.
Master reset
The phone is reset to the default val-
ues (factory setting) (does not apply
to SIM card and network settings).
p
Barring set.
o
Barring not set.
Status unknown (e.g.
new SIM card).
s
Clear all
Alternatively enter in standby mode:
A
# 9 9 9 9 #
*
All barrings are deleted. A password
supplied by your service provider is
required for this function.
76
Setup
¢
¢
¢
§Menu§
m
Network
Select a function
Network
¢
¢
§Menu§
m
Network
¢
Select a function
Network info
The list of GSM networks currently
available is displayed.
Line
b
This function is only displayed if it is
supported by the service provider.
Two independent phone numbers
must be registered on the phone.
Indicates forbidden serv-
²
ice providers (depending
on SIM card).
Auto network
Select
Select the currently used phone
number.
Activate/deactivate, see also Choose
network above. If "Automatic net-
work" is activated, the next network
on the list is dialled in ranking order
of your "preferred networks". Other-
wise a different network can be
selected manually from the list of
the available GSM networks.
Display the current phone
number.
‘
Block line
(Phone code is protected)
You may limit usage to one phone
number.
Choose network
Additional notes
The network search is restarted. This
is useful if you are not on your home
network or want to register on a
different network. The network list is
rebuilt when Auto network is set.
Special settings may be made for
each phone number (e.g., melody,
call divert etc.) To do this, first
switch to the required phone
number. Change phone
number/connection in standby
mode:
Preferred network
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
0
Press.
Press.
§Line 1§
Setup
77
Additional informationn
If you are outside your home network, your
phone automatically dials another GSM
network .
If the field strength of the preferred network
is not strong enough when you switch the
phone on, the mobile phone may register
with a different network. This can change
when the telephone is next switched on or if
you manually select another network.
Your service provider is displayed:
§List§
Display list of preferred
networks.
Create new entry:
• Select empty line, press §Entry§
then select another entry from the
list of service providers and con-
firm.
Change/delete entry:
• Select entry, press §Change§, then
select a different entry from the
list of service providers and con-
firm it or press §Clear§.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
78
Ring tones
Additional notes
Ring tones
Please make sure you have accepted the
call before holding the phone to your ear.
This will prevent a loud ring tone from dam-
aging your hearing!
¢
¢
§Menu§
ç
Select function.
You can set the tones to match your
needs.
d Calls, Group calls, Other calls,
Alarm clock, Messages
Here you can set the ring tone sepa-
rately for the stated call types/func-
tions.
Ringer setting
On/Off
Activate/deactivate all
ring tones.
Beep
Reduce ring tone to a
short signal (beep).
Select ring tone.
G
Additional notes
k
Displays: Beep.
Displays: Ringer off.
§OK§
Confirm.
j
With Download new you can down-
load new ring tones from the Inter-
net.
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The silent alert can also be acti-
vated in addition to the ringer (e.g.
in noisy environments). This func-
tion is deactivated when the battery
is being charged.
Additional notes
them via WAP (p. 58).
See also Own stuff, p. 84 and
My phone, p. 19.
Volume
You can set the same volume for all
ring tones.
Set volume.
G
§OK§
Confirm.
Ring tones
79
More tones...
¢
¢
§Menu§
ç
More tones...
Select a function.
¢
Call screening
b
Only calls from numbers that are in
the Phonebook or in a predefined
group are signalled audibly or by
silent alert. Other calls are only dis-
played.
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 69).
l
Screen display in standby
mode:
when call screening is
activated.
Key tones
You can set the acoustic key
acknowledge tone:
Click or Tone or Still
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
Info tones
Set service and alarm tones:
On/Off
Activate/deactivate tones.
80
Extras
Alarm clock
The alarm will ring at the time set by
you, even when the phone is
switched off.
Extras
§Menu§
¢
¢ Select function.
y
SIM services
(optional)
Setting
b
Set the time for the alarm
call (hh:mm).
Your service provider may offer spe-
cial applications such as mobile
banking, share prices, etc. via the
SIM card.
§OK§
Confirm settings.
y Alarm clock
If you have such a SIM card, the SIM
services will appear in the main
menu under "Extras" or directly
above the control key (on the left).
11:56:27
z 07:30
On/off
OK
Symbol for SIM services.
}
§On/off§
Activate/deactivate the
alarm.
Where there are several applications,
these are displayed in an SIM serv-
ices menu.
Additional notes
With the SIM services menu, your
phone is ready to support future
additions in your service provider's
user package. For further informa-
tion, please contact your service
provider.
y
Alarm clock activated.
Alarm clock deactivated.
Screen display in standby
mode: Alarm clock activated.
z
Ö
Extras
81
§Menu§
¢
¢ Select function.
y
Stopwatch
Two intermediate times can be
recorded and saved.
Calculator
Enter number
(up to 8 digits).
J
Stopwatch
æ
00:00:00.000
/
Select calculate func-
tion.
—
+
I
Start
Options
x
Repeat procedure with
other numbers.
J
§Reset§
ꢀ
*
Reset to zero.
Start/stop.
Result is displayed.
ꢀ
Calculator functions
Intermediate time.
§.§=§+§-§*§/§ Press the right soft key
Stopwatch menu
repeatedly.
±
%
Toggle between "+" and "-".
Convert to percent.
§Options§ Open menu.
Ï
Save the displayed number.
Retrieve the number saved.
Exponent (maximum of two
digits).
Save
Record the time(s) meas-
Ð
ured and assign a name to
them.
e
Reset
Reset stopwatch.
Stopwatch
list
Display the stored times.
Special keys:
*
View Display the stored
times and intermediate
times.
RenameRename stored
entry.
Set decimal point.
Add (hold down).
0
DeleteDelete entry.
Delete all Delete list.
82
Fast access key
Left soft key
Fast access key
Assign a function/phone number to
the left soft key for fast access.
The left soft key and the number
keys 2 to 9 (speed dialling numbers)
can each be assigned an important
phone number or a function. The
phone number can then be dialled or
the function can be started at the
touch of a button.
Change
_
g
Service provider
Additional notes
01.10.2003
10:10
The left soft key may already have a func-
tion allocated by your service provider (e.g.
access to "}SIM card services"). It may
not be possible to modify this key assign-
ment.
Internet
Menu
§Internet§ Press briefly.
The left soft key may also sometimes be
§Change§ Scroll to application in the
replaced automatically by
access a new message.
/\to
]
list.
Available key assignments:
SMS) to the soft key.
Internet (WAP) ..................................p. 58
Phone number...................................p. 31
Alarm clock........................................p. 80
New SMS ..........................................p. 43
Illumination........................................p. 67
Hide ID ..............................................p. 68
Calls missed......................................p. 37
Calls received....................................p. 37
Inbox (Messages)..............................p. 47
Retrieve a name (e.g. 'Carola') as
the default for the soft key.
Confirm setting.
Apply
The setting "Carol" is used here only
as an example.
§Carola§
Hold down.
Fast access key
83
Apply
Speed dialling keys
Select a stored phone number or
start a stored application
(e. g. New SMS).
speed dialling numbers for fast
ments see p. 82. Number key 1 is
reserved for the mailbox number
(p. 41).
In standby mode:
Press briefly.
3
The assignment of the number key 3
is displayed above the right soft key
e.g.:
Change
In standby mode:
§New SMS§ Hold down:
Press number key (2- 9).
J
Or simply
If the key is not yet
assigned:
Hold down.
3
§Set§
Press.
Or
§New SMS§ Press briefly (if assigned to
New SMS, for example).
§Change§ Scroll to application in the
list.
Special case Phone num-
ber. Pick out a name from
the Phonebook for assign-
ment to the key.
Special case Bookmarks.
Scroll to a URL in the
bookmark list for assign-
ment to the key.
§Select§
Confirm setting.
84
Own stuff
The following folders are also
included in these main folders:
Own stuff
The following folders are provided or
organising your files: Pictures, Ani-
mations, Sounds.
Down-
This enables you to download
load new new files from the Internet..
EMS
Files that can be received per
SMS/MMS.
§Menu§ ¢ Ñ
Files and folders are displayed.
File system menu
You can scroll through these lists
using the control key:
§Options§ Open menu.
scroll up and down.
G
Open
Open folder.
jump back from a folder.
C
Delete
Delete current entry.
Delete all entries.
§Open§
Open folder or execute
file using related applica-
tion
Delete all
Rename
Send via...
Attributes
Rename highlighted entry.
Send highlighted entry.
Index structure
The file system assigns special fold-
ers to different data types.
Display information on file or
folder selected.
Drive info
Display the capacity used
and available.
Folders Contents
Format
Pictures Imagesr
*.bmp
*.jpg
*.jpeg
Camera Own Photos (p. 39) *.png
Anima- Animations
tions
*.bmx
*.gif
Sounds
*.mid
Ring tones, melo-
dies, sounds
Data Exchange Software
85
Data Exchange
Software
Using this software, you extend the
functionality of your mobile phone
phone and PC are connected to each
other by means of a data cable
(Accessories, p. 94). To ensure per-
fect data transmission it is necessary
that the phone be set to the standby
mode (e.g. no active application, no
incoming call).
The software can be downloaded
over the Internet:
The Data Exchange software works
with Windows® Explorer like an
extra drive and mirrors the contents
of the file system (p. 84) on your
phone.
You can access the data in the appli-
cations on the phone and synchro-
nise these with the PC by simple drag
and drop.
Warning!
When you access the file system, please
ensure that no files are deleted that are
essential to running applications on the
mobile phone.
86
Questions & Answers
Questions & Answers
If you have any questions regarding the use of your phone, you can contact us at
www.my-siemens.com/customercare at any time. In addition to this we have listed some
frequently asked questions and answers below.
Question
Possible causes
Possible solution
Phonecannotbe On/Off key not pressed long
Press On/Off key for at least two seconds.
switched on.
enough.
Flat battery.
Charge battery. Check charging indicator in the dis-
play.
Battery contacts dirty.
Clean contacts.
See also below under: “Charging
error”
Insufficient
standby time.
Frequent use of organiser or
games.
Restrict use if necessary.
Speed search active.
Deactivate speed search (p. 77).
Display illumination switched on. Switch off display illumination (p. 67).
Unintentional keystrokes
(illumination!).
Switch on key lock (ꢀpress for long time).
Charging error Battery totally discharged.
(charge icon not
displayed).
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
5 °C to 40 °C.
Make sure the ambient temperature is right, wait a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device plug socket, clean
them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains volt-
age.
Wrong charger.
Battery faulty.
Only use original Siemens accessories.
Replace battery.
SIM error.
SIM card not correctly inserted.
SIM card contacts dirty.
Check that the SIM card is inserted correctly (p. 10).
Use a dry cloth to clean the SIM card.
Use 3 V SIM cards only.
SIM card with wrong voltage.
SIM card damaged (e.g. broken). Visually inspect the damage. Have SIM card
replaced by service provider.
Questions & Answers
Possible solution
87
Question
Possible causes
No connection to Weak signal.
network.
Move to higher location, to a window or open space.
Contact the service provider.
Outside GSM range.
SIM card not valid.
New network not authorised.
Try manual selection or select a different
network(p. 76).
Network barring is set.
Network overloaded.
Check barrings (p. 74).
Try again later.
Phone loses net- Signal too weak.
work.
matic (p. 76). Switching the phone off and on may
speed this up.
Calls not
possible.
2nd line set.
Set first line ‘(p. 76).
Check for new restrictions.
Load credit.
New SIM card inserted.
Charge limit reached.
Credit used up.
Certain uses of Call restrictions are set.
the phone not
possible.
Barrings may be set by your service provider.
Check barrings (p. 74).
No entries possi- Phonebook is full.
Delete entries in Phonebook (p. 31).
ble in
Phonebook.
Voice mail does Call divert to the mailbox not set. Set call divert to the mailbox (p. 69).
not work
SMS (text mes- SMS memory full.
To free up capacity, delete (p. 47) or file (p. 48) text
messages (SMS).
sage) Tflash-
ing.
Function cannot Not supported by service provider Contact your service provider.
be set. or registration required.
Memory prob- Phone memory full.
lems for, e.g.
Delete files in the applicable areas and unneeded T9
dictionaries.
messages, ring
tones, pictures.
No WAP access, Profile not activated, profile set- Activate WAP profile (p. 60), set (p. 60). If necessary,
no download
possible.
tings wrong/incomplete.
ask your service provider.
88
Questions & Answers
Possible causes
Question
Possible solution
Message can- Service provider does not support Check with your service provider.
not be sent.
this service.
Phone number of the service cen- Set service centre (p. 48).
tre is not set or is wrong.
SIM card contract does not sup- Contact your service provider.
port this service.
Service centre too busy.
Repeat message.
Recipient does not have a com- Check.
patible phone.
EMS pictures
Recipient's phone does not sup-
and sounds not port EMS standard.
displayed at des-
tination phone.
No Internet
Wrong WAP profile set or settings Check settings, speak to service provider if neces-
access possible. wrong, incomplete.
sary.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied with the SIM
TER PIN) has been lost, please contact your service
provider.
Phone code
error.
Three wrong entries.
Contact Siemens Service (p. 89).
Service provider No authorisation for this service. Contact your service provider.
code- error.
Too few/too
many menu
entries.
Functions may have been added Check with your service provider.
or removed by your service pro-
vider via the SIM card.
Charge counter Charge pulse is not transmitted. Contact your service provider.
does not work.
Damage
Severe shock.
Remove battery and SIM and insert them again. Do not dismantle phone!
Dry connector contacts thoroughly. Set phone to vertical position in air flow.
Do not dismantle phone!
Reset settings to factory default (see also p. 75): # 9 9 9 9 # A
*
Customer care
89
Customer care
We offer fast, individual advice! You have several options:
Our online support on the Internet:
www.my-siemens.com/customercare
We can be reached any time, any place. You are given 24 hour support on all aspects of our
products. Here you will find an interactive fault-finding system, a compilation of the most
download.
You will also find the most frequently asked questions and answers in the section entitled
p. 86 in this user guide.
You can also get personal advice about our range of products on our Premium Hotline:
United Kingdom...................0906 9597500
(0.75 £ per minute)
Qualified Siemens employees are waiting to offer you expert information about our products
and installation.
In some countries repair and replace services are impossible where the products are not
sold through our authorised dealers.
When calling customer service, please have ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the software version (to display, press # 0 6 #,
*
*
then info) and if available, your Siemens Service customer number.
If repair work is necessary, please contact one of our service centres:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia................................................ 06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany *....................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong.......................................... 28 61 11 18
90
Customer care
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 66 76 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman....................................................... 79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam............................................... 49 43 73 23
Zimbabwe ........................................... 04 36 94 24
Care and maintenance
91
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary,
repair the device.
Care and
maintenance
'Your phone has been designed and
manufactured to the highest of
standards and should be treated
with the greatest of care. The sug-
gestions below will help you to enjoy
your phone for many years.
• Protect your phone from moisture
and humidity! Precipitation,
humidity and liquids contain min-
erals that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power sup-
ply and remove the battery!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries and
warp or melt certain plastics.
• Do not store your phone in cold
areas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form
inside the phone, which may dam-
age electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can dam-
age internal circuit boards!
• Do not use harsh chemicals, clean-
ing solvents, or strong detergents
to clean the phone!
92
Product data
Size:
110 x 47 x 23 mm
(91 ccm)
Product data
Li-ion battery:
700 mAh
Declaration of conformity
Operating
temperature:
-10 °C… 55 °C
Siemens Information and Communi-
cation mobile hereby declares that
the phone described in this user
guide is in compliance with the
essential requirements and other rel-
evant provisions of European Direc-
tive 1999/5/EC (R&TTE).
SIM card:
3.0 V
Operating time
A full battery will deliver 60 to
250 hours of standby time or 100 to
300 minutes of talktime.
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you
require a copy of the original.
The operating time depends upon
the use:
Action taken Time Reduces standby
(min) time by
Making a
phone call
1
30 - 90 minutes
Technical data
Light *
1
1
40 minutes
GSM class:
Frequency range: 880 - 960 MHz
GSM class: 1 (1 watt)
Frequency range: 1.710 - 1.880 MHz
GSM class: 1 (1 watt)
Frequency range: 1,850 - 1,990 MHz
Weight: 85 g
4 (2 watt)
Network
search
5 - 10 minutes
* Keypad entry, games etc.
Extreme temperatures reduce the
phone's standby time considerably.
You should therefore avoid the leav-
ing the phone in the sun or on a
radiator.
Product data
93
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here:
the number of the SIM card (on the card):
..............................................................
15-the 15-digit serial number of the phone
(under the battery):
..............................................................
the service provider’s Customer Service
number:
..............................................................
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
94
Accessories
Fashion & Mobility
Carrying Cases
Accessories
You can buy different carrying cases in
stores or from our online shop.
Energy
Li-Ion Battery 700mAh EBA-510
CLIPit Covers
You can buy exchangable front and back
covers in stores or from our online shop.
Spare battery.
Travel Charger
ETC-500 (Euro)
ETC-510 (UK)
Travel charger with an extended input
voltage range of 100-240V.
Office
Data Cable DCA-500
For connecting the phone to the serial
RS232 port of the PC.
Car Charger ECC-500
Charger for the cigarette lighter socket in
the car.
Data Cable USB DCA-510
For connecting the phone to the USB port of
the PC. With charge function.
Desk Top Charger EDC-510
The desk top charger enables the phone to
be charged easily as well as an additional
battery.
Original Siemens Accessories
Handsfree Portable
Headset PTT HHS-510
Headset with PTT key for accepting or end-
ing calls.
Multitainment
QuickPic Camera IQP-500
Camera that plugs into the mobile phone.
Take photos and send the images from your
mobile phone via MMS to other mobile
phones or by email to a PC. Optional inte-
grated flash that can be switched on or off as
needed.
Accessories
95
Car Solutions
Car Kit Portable HKP-500
Handsfree kit with integrated loudspeaker
and microphone and auto answer feature.
Simply plug into the cigarette lighter socket.
Particularly ideal for easy transfer between
vehicles.
Mobile Holder HMH-630
Die Telefonhalterung ohne Antennenan-
schluss. Can also be used as a phone holder
for upgrading your handsfree kit (55 series).
Basic Car Pack HKB-500
Allows in-car charging of your mobile phone
as well as handsfree talking. Contains a
Car Charger, a Headset PTT and a Y
adapter.
Car Kit Comfort HKC-630
Handsfree kit with first-class digital call qual-
ity and supreme ease of use. Includes all
components needed for installation. Individ-
ual antenna solutions can be obtained in
specialist shops.
Car Kit Upgrade HKO-630
Mobile phone holder for upgrading your
handsfree Car Kit Comfort.
Optional Car Kit accessories
VDA Adapter Cable HKO-560
Products can be obtained in specialist shops
or you can visit our online shop at:
Original Siemens Accessories
96
Battery quality statement
Battery quality
statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As a
result the operating time of your
mobile phone may be considerably
reduced, even after a full recharge of
the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
Guarantee certificate (UK)
97
• This Guarantee shall apply to new devices
purchased in the European Union. The
Guarantee is issued by Siemens plc, Sie-
mens House, Oldbury, Bracknell, Berk-
shire, RG12 8FZ.
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer's liability for death or personal
injury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
Guarantee certifi-
cate (UK)
Without prejudice to any claim the user (cus-
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the condi-
tions set out below:
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either
replace the device with another device
reflecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the
device defect is attributable to improper
treatment and/or failure to comply with
information contained in the user manuals.
• This Guarantee shall not apply to or
extend to services performed by the
authorised dealer or the customer them-
selves (e.g. installation, configuration,
software downloads). User manuals and
any software supplied on a separate data
medium shall be excluded from the Guar-
antee.
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
• Ownership of devices or components
replaced by and returned to Siemens shall
vest in Siemens.
98
Menu tree
Menu tree
>
Phonebook
<New entry>
<Special books>
<Groups>
è
>
>
<Own numbrs>
<Service number>
<SIM phonebook>
<Protected SIM>
>
Records
Calls missed
Z
Calls received
Calls dialled
Erase records
Durat/charges
Last call
All outgoing
All incoming
Remain. units
Charge sett.
>
Conv.
>
>
Homepage
Bookmarks
Internet
Personal rate
A/c limit
ÉSurf & fun
Auto display
Games & more
Ringer setting
Silent alert
Volume
çRing tones
d Calls
Group calls
Other calls
Alarm clock
Messages
More tones...
>
Call screening
Key tones
Minute beep
Info tones
Menu tree
99
>
New SMS
New MMS
Predef. texts
Inbox
]Messages
>
>
>
>
>
SMS
MMS
Draft
SMS
MMS
Unsent
Sent
SMS
MMS
SMS
MMS
SMS archive
Setup
T9 preferred
Input language
SMS profiles
MMS profiles
Voice message
CB services
>
Receive CB
Topic list
ꢁCamera
>
Extras
SIM services
Alarm clock
Calculator
y
Stopwatch
ÑOwn stuff
100
Menu tree
>
Profiles
Display
mSetup
>
Language
Wallpaper
Logo
Colour scheme
Own greeting
Big letters
Illumination
Contrast
>
>
Screensaver
Enable
Style
Preview
Timeout
Security
Call setup
Hide ID
Call waiting
Any to answer
Minute beep
Car Kit
Headset
>
Divert
All calls
Unanswered
Not reachable
No reply
Busy
Status check
Clear all
Menu tree
101
>
>
Clock
Time/Date
mSetup
Time format
Time zones
Date format
Buddhist year
Show clock
>
>
Connectivity
GPRS
GPRS info
Data services
>
MMS, WAP
Java
HTTP profile
Authentication
Security
Direct call
Only ‚
Last 10 only
Codes
>
>
PIN control
Change PIN
Change PIN2
Chg.phonecode
This SIM only
Barrings
All outgoing
Outgo internat
Out.int.x home
All incoming
When roaming
Status check
Clear all
Phone identity
Filesystem clean up
Master reset
102
Menu tree
>
>
>
Network
Line
Select
mSetup
Network info
Auto network
Choose network
Block line
SAR - European Union (RTTE)
103
SAR - European Union (RTTE)
INFORMATION ON RF EXPOSURE
/SPECIFIC ABSORPTION RATE (SAR)
The limit for mobile phones recom-
mended by the Council of the Euro-
pean Union employs a unit of meas-
urement known as the Specific
Absorption Rate, or SAR. This SAR
limit is 2.0 W/kg3. This corresponds
with the requirements of the Inter-
national Commission for Non-Ioniz-
ing Radiation Protection ICNIRP4 and
was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile
phones is determined in accordance
with the European Norm EN 50361.
This involves measuring the maxi-
mum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power level.
The actual SAR level of the phone
during normal operation may be
well below the maximum value.
This is because the phone is de-
signed to operate at multiple power
levels so as to use only the power re-
THIS MOBILE PHONE MEETS THE
LIMITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO
ELECTROMAGNETIC FIELDS
These limits are part of comprehen-
sive recommendations for the pro-
tection of the public. The recom-
mendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies1. The limits include a sub-
stantial safety margin designed to
assure the safety of all persons, re-
gardless of age and health.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the re-
spective technical limit require-
ments must be demonstrated. Only
then the CE mark may be affixed2.
2 The CE mark confirms that the product is
in compliance with the legal requirements
of the European Union as a prerequisite
for the placing on the market and the free
movement of goods within the European
internal market.
1 The World Health Organization (WHO,
CH-1211 Geneva 27, Switzerland) states
that present scientific information does
not indicate the need for any special
precautions for use of mobile phones.
Further information:
3 averaged over 10 g body tissue.
www.who.int/peh-emf,
www.mmfai.org,
www.my-siemens.com.
4 International Commission on Non-
Ionizing Radiation Protection
www.icnirp.de
104
SAR - European Union (RTTE)
quired to reach the network. In gen-
eral, the closer you are to a base sta-
tion, the lower the power output.
The highest SAR value for this model
phone when tested for compliance
against the norm is 0.67 W/kg1.
The SAR information can also be
found on the Siemens web site at
www.my-siemens.com. While there
may be differences between the SAR
levels of various phones and at
various positions, all Siemens
products meet the legal
requirements.
1 SAR values may vary depending on
national requirements and frequency
bands. SAR information for different
regions can be found at www.my-
siemens.com.
SAR - International (ICNIRP)
105
SAR - International (ICNIRP)
INFORMATION ON RF EXPOSURE
/SPECIFIC ABSORPTION RATE (SAR)
stantial safety margin designed to
assure the safety of all persons, re-
gardless of age and health.
THIS MOBILE PHONE MEETS THE
LIMITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO
The exposure limit for mobile
phones employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. The SAR
limit stated in the international
guidelines is 2.0 W/kg2. Tests for SAR
are conducted in all frequency bands
using standard operating positions
with the phone transmitting at its
highest power level. The actual SAR
level of the phone during operation
can be well below the maximum
value. This is because the phone is
designed to operate at multiple
power levels so as to use only the
power required to reach the
ELECTROMAGNETIC FIELDS
Your mobile phone is a radio trans-
mitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequen-
cy (RF) energy recommended by in-
ternational guidelines from the In-
ternational Commission on Non-
Ionizing Radiation Protection
(ICNIRP). These limits are part of
comprehensive guidelines for the
protection of the public and estab-
lish permitted levels of RF energy for
the population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies1. The limits include a sub-
network. In general, the closer you
are to a base station, the lower the
power output.
The highest SAR value for this model
phone when tested for use at the ear
is 0.67 W/kg3.
SAR information can also be found at
www.my-siemens.com. While there
may be differences between the SAR
levels of various phones and at
1 The World Health Organization (WHO,
CH-1211 Geneva 27, Switzerland) states
that present scientific information does
not indicate the need for any special
precautions for use of mobile phones.
Further information:
www.who.int/peh-emf,
www.mmfai.org,
www.my-siemens.com.
2 averaged over 10 g body tissue.
3 SAR values may vary depending on
national requirements and frequency
bands. SAR information for different
regions can be found at www.my-
siemens.com.
106
SAR - International (ICNIRP)
various positions, they all meet the
international guidelines for safe RF
exposure.
Further information:
www.who.int/peh-emf, www.mmfai.org,
www.my-siemens.com.
Index
107
A
C
Alarm
All calls (call time/charge) ........... 38
(in the network) ......................... 41
Application (download) .............. 61
Auto display
Calls dialled (call list)...................37
Clock ...................................... 71
Auto timezone............................ 71
Automatic Redial previous
numbers..................................... 21
B
Charge rate.................................38
Charges ......................................38
Clock ..........................................71
Battery
Bookmarks (WAP) ....................... 58
Browser, WAP............................. 59
Busy number .............................. 21
108
Conference................................. 24
Connection profile...................... 72
Control code (DTMF) ............ 20, 36
CSD
D
Date format................................ 71
Dialling with number keys .......... 20
Display
Upper-case letters................... 66
Display (settings)........................ 66
DTMF codes
I
Inbox
(control codes) ..................... 20, 36
Input language (T9) ....................28
E
EMS ........................................... 45
Entry no. (phonebook)................ 31
F
Factory settings.......................... 75
Filter
Java............................................72
Incoming calls......................... 79
Flashlight ................................... 39
Index
109
K
N
L
Limit (call time/charge)............... 38
logo, provider logo ..................... 66
O
Own files ....................................84
M
Mailbox...................................... 41
menu
control.................................... 14
Message
MMS....................................... 50
Messages
P
Phone identity number
Microphone on/off...................... 25
MMS
write....................................... 50
Muting (microphone) ................. 25
My phone................................... 19
Pocket calculator.........................81
Predefined text ...........................30
Prefix..........................................20
110
Preventing accidental
Swapping calls............................23
Profiles
WAP ....................................... 60
Provider logo.............................. 66
Q
R
Redial previous numbers............. 20
Reminder ................................... 21
Ring tones.................................. 78
S
Security codes ............................ 17
Setup
Short message (SMS).................. 43
Shown in the display .................... 7
Siemens City Portal..................... 19
Text entry without T9..................27
Time zones ........................... 12, 71
Time/Date setting........................71
Index
111
U
W
Upper, lowercase letters ............. 27
Upper-case letters
WAP
browser ..................................59
parameters..............................60
(message on display).................. 66
V
MMS....................................... 55
Volume, handset
Headset volume...................... 20
Profiles ................................... 64
Ring tone................................ 78
|